arm64: dts: marvell: add DTS for GL.iNet GL-MV1000

The GL-MV1000 (Brume) is a small form-factor gateway router.
It is based on the Marvell Armada 88F3720 SOC (1GHz), has 3 gigabit ethernet ports, 1 GB RAM, 16M SPI flash, 8GB eMMC and an uSD slot, as well as an USB 2.0 type A and an USB 3.0 type C port.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
CC: Pali <pali@kernel.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 058237681fe51982fe80647b7ab4d2e6102c3b0e..79ac09b58a8995f4026f9ff7a678f423c75a0e39 100644 (file)
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
new file mode 100644 (file)
index 0000000..b1b45b4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+       model = "GL.iNet GL-MV1000";
+       compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+       };
+
+       vcc_sd_reg1: regulator {
+               compatible = "regulator-gpio";
+               regulator-name = "vcc_sd1";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+
+               gpios-states = <0>;
+               states = <1800000 0x1
+                       3300000 0x0>;
+               enable-active-high;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+               };
+
+               switch {
+                       label = "switch";
+                       linux,code = <BTN_0>;
+                       gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               vpn {
+                       label = "green:vpn";
+                       gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "green:wan";
+                       gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power: power {
+                       label = "green:power";
+                       gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               reg = <0>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <104000000>;
+               m25p,fast-read;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "firmware";
+                               reg = <0 0xf0000>;
+                       };
+
+                       partition@f0000 {
+                               label = "u-boot-env";
+                               reg = <0xf0000 0x8000>;
+                       };
+
+                       factory: partition@f8000 {
+                               label = "factory";
+                               reg = <0xf8000 0x8000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "dtb";
+                               reg = <0x100000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@110000 {
+                               label = "rescue";
+                               reg = <0x110000 0x1000000>;
+                       };
+               };
+       };
+};
+
+&sdhci1 {
+       wp-inverted;
+       bus-width = <4>;
+       cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+       marvell,pad-type = "sd";
+       no-1-8-v;
+       vqmmc-supply = <&vcc_sd_reg1>;
+       status = "okay";
+};
+
+&sdhci0 {
+       bus-width = <8>;
+       mmc-ddr-1_8v;
+       mmc-hs400-1_8v;
+       non-removable;
+       no-sd;
+       no-sdio;
+       marvell,pad-type = "fixed-1-8v";
+       status = "okay";
+};
+
+&usb3 {
+       status = "okay";
+};
+
+&usb2 {
+       status = "okay";
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&mdio {
+       switch0: switch0@1 {
+               compatible = "marvell,mv88e6085";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+
+               dsa,member = <0 0>;
+
+               ports: ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               label = "cpu";
+                               ethernet = <&eth0>;
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               label = "wan";
+                               phy-handle = <&switch0phy0>;
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               label = "lan0";
+                               phy-handle = <&switch0phy1>;
+
+                               nvmem-cells = <&macaddr_factory_6>;
+                               nvmem-cell-names = "mac-address";
+                       };
+
+                       port@3 {
+                               reg = <3>;
+                               label = "lan1";
+                               phy-handle = <&switch0phy2>;
+
+                               nvmem-cells = <&macaddr_factory_6>;
+                               nvmem-cell-names = "mac-address";
+                       };
+               };
+
+               mdio {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       switch0phy0: switch0phy0@11 {
+                               reg = <0x11>;
+                       };
+                       switch0phy1: switch0phy1@12 {
+                               reg = <0x12>;
+                       };
+                       switch0phy2: switch0phy2@13 {
+                               reg = <0x13>;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       nvmem-cells = <&macaddr_factory_0>;
+       nvmem-cell-names = "mac-address";
+       phy-mode = "rgmii-id";
+       status = "okay";
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_0: macaddr@0 {
+               reg = <0x0 0x6>;
+       };
+
+       macaddr_factory_6: macaddr@6 {
+               reg = <0x6 0x6>;
+       };
+};