arm64: dts: rockchip: Enable HDMI0 on FriendlyElec CM3588 NAS

Add the necessary DT changes to enable HDMI0 on FriendlyElec CM3588 NAS.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20241108171423.835496-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
index 411007cb8118a58e5027b5f6a06afab2cccbac4b..b3a04ca370bb925b3caba40cdfc14cc2bd3e4229 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
@@ -11,6 +11,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588-friendlyelec-cm3588.dtsi"
 
@@ -89,6 +90,17 @@
                };
        };
 
+       hdmi0-con {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi0_con_in: endpoint {
+                               remote-endpoint = <&hdmi0_out_con>;
+                       };
+               };
+       };
+
        ir-receiver {
                compatible = "gpio-ir-receiver";
                gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
@@ -307,6 +319,26 @@
                "", "", "", "";
 };
 
+&hdmi0 {
+       status = "okay";
+};
+
+&hdmi0_in {
+       hdmi0_in_vp0: endpoint {
+               remote-endpoint = <&vp0_out_hdmi0>;
+       };
+};
+
+&hdmi0_out {
+       hdmi0_out_con: endpoint {
+               remote-endpoint = <&hdmi0_con_in>;
+       };
+};
+
+&hdptxphy_hdmi0 {
+       status = "okay";
+};
+
 /* Connected to MIPI-DSI0 */
 &i2c5 {
        pinctrl-names = "default";
@@ -776,3 +808,18 @@
 &usbdp_phy1 {
        status = "okay";
 };
+
+&vop {
+       status = "okay";
+};
+
+&vop_mmu {
+       status = "okay";
+};
+
+&vp0 {
+       vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+               reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+               remote-endpoint = <&hdmi0_in_vp0>;
+       };
+};