+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * Makefile.in (dg_target_exps): Remove.
+ (check_gcc_parallelize): Change to just an upper bound number.
+ (check-%-subtargets): Always print the non-parallelized goals.
+ (check_p_vars, check_p_comma, check_p_subwork): Remove.
+ (check_p_count, check_p_numbers0, check_p_numbers1, check_p_numbers2,
+ check_p_numbers3, check_p_numbers4, check_p_numbers5,
+ check_p_numbers6): New variables.
+ (check_p_numbers): Set to sequence from 1 to 9999.
+ (check_p_subdirs): Set to sequence from 1 to minimum of
+ $(check_p_count) and either GCC_TEST_PARALLEL_SLOTS env var if set,
+ or 128.
+ (check-%, check-parallel-%): Rewritten so that for parallelized
+ testing each job runs all the *.exp files, with
+ GCC_RUNTEST_PARALLELIZE_DIR set in environment.
+
2014-09-15 David Malcolm <dmalcolm@redhat.com>
* config/arc/arc-protos.h (arc_attr_type): Strengthen param from
xm_defines=@xm_defines@
lang_checks=
lang_checks_parallelized=
-dg_target_exps:=aarch64.exp,alpha.exp,arm.exp,avr.exp,bfin.exp,cris.exp
-dg_target_exps:=$(dg_target_exps),epiphany.exp,frv.exp,i386.exp,ia64.exp
-dg_target_exps:=$(dg_target_exps),m68k.exp,microblaze.exp,mips.exp,powerpc.exp
-dg_target_exps:=$(dg_target_exps),rx.exp,s390.exp,sh.exp,sparc.exp,spu.exp
-dg_target_exps:=$(dg_target_exps),tic6x.exp,xstormy16.exp
-# This lists a couple of test files that take most time during check-gcc.
-# When doing parallelized check-gcc, these can run in parallel with the
-# remaining tests. Each word in this variable stands for work for one
-# make goal and one extra make goal is added to handle all the *.exp
-# files not handled explicitly already. If multiple *.exp files
-# should be run in the same runtest invocation (usually if they aren't
-# very long running, but still should be split of from the check-parallel-$lang
-# remaining tests runtest invocation), they should be concatenated with commas.
-# Note that [a-zA-Z] wildcards need to have []s prefixed with \ (needed
-# by tcl) and as the *.exp arguments are mached both as is and with
-# */ prefixed to it in runtest_file_p, it is usually desirable to include
-# a subdirectory name.
-check_gcc_parallelize=execute.exp=execute/2* \
- execute.exp=execute/\[013-9a-fA-F\]* \
- execute.exp=execute/\[pP\]*,dg.exp \
- execute.exp=execute/\[g-oq-zG-OQ-Z\]*,compile.exp=compile/2* \
- compile.exp=compile/\[9pP\]*,builtins.exp \
- compile.exp=compile/\[013-8a-oq-zA-OQ-Z\]* \
- dg-torture.exp,ieee.exp \
- vect.exp,unsorted.exp \
- guality.exp \
- struct-layout-1.exp,stackalign.exp \
- $(dg_target_exps)
+# Upper limit to which it is useful to parallelize this lang target.
+# It doesn't make sense to try e.g. 128 goals for small testsuites
+# like objc or go.
+check_gcc_parallelize=10000
lang_opt_files=@lang_opt_files@ $(srcdir)/c-family/c.opt $(srcdir)/common.opt
lang_specs_files=@lang_specs_files@
lang_tree_files=@lang_tree_files@
export TCL_LIBRARY ; fi ; \
$(RUNTEST) --tool $* $(RUNTESTFLAGS))
-$(patsubst %,%-subtargets,$(filter-out $(lang_checks_parallelized),$(lang_checks))): check-%-subtargets:
+$(patsubst %,%-subtargets,$(lang_checks)): check-%-subtargets:
@echo check-$*
check_p_tool=$(firstword $(subst _, ,$*))
-check_p_vars=$(check_$(check_p_tool)_parallelize)
+check_p_count=$(check_$(check_p_tool)_parallelize)
check_p_subno=$(word 2,$(subst _, ,$*))
-check_p_comma=,
-check_p_subwork=$(subst $(check_p_comma), ,$(if $(check_p_subno),$(word $(check_p_subno),$(check_p_vars))))
-check_p_numbers=1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+check_p_numbers0:=1 2 3 4 5 6 7 8 9
+check_p_numbers1:=0 $(check_p_numbers0)
+check_p_numbers2:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
+check_p_numbers3:=$(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
+check_p_numbers4:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
+check_p_numbers5:=$(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
+check_p_numbers6:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
+check_p_numbers:=$(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
check_p_subdir=$(subst _,,$*)
-check_p_subdirs=$(wordlist 1,$(words $(check_$*_parallelize)),$(check_p_numbers))
+check_p_subdirs=$(wordlist 1,$(check_p_count),$(wordlist 1, \
+ $(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128), \
+ $(check_p_numbers)))
# For parallelized check-% targets, this decides whether parallelization
# is desirable (if -jN is used and RUNTESTFLAGS doesn't contain anything
# but optional --target_board or --extra_opts arguments). If desirable,
# recursive make is run with check-parallel-$lang{,1,2,3,4,5} etc. goals,
# which can be executed in parallel, as they are run in separate directories.
-# check-parallel-$lang{1,2,3,4,5} etc. goals invoke runtest with the longest
-# running *.exp files from the testsuite, as determined by check_$lang_parallelize
-# variable. The check-parallel-$lang goal in that case invokes runtest with
-# all the remaining *.exp files not handled by the separate goals.
+# check-parallel-$lang{,1,2,3,4,5} etc. goals invoke runtest with
+# GCC_RUNTEST_PARALLELIZE_DIR var in the environment and runtest_file_p
+# dejaGNU procedure is overridden to additionally synchronize through
+# a $lang-parallel directory which tests will be run by which runtest instance.
# Afterwards contrib/dg-extract-results.sh is used to merge the sum and log
# files. If parallelization isn't desirable, only one recursive make
# is run with check-parallel-$lang goal and check_$lang_parallelize variable
# to lang_checks_parallelized variable and define check_$lang_parallelize
# variable (see above check_gcc_parallelize description).
$(lang_checks_parallelized): check-% : site.exp
- @if [ -z "$(filter-out --target_board=%,$(filter-out --extra_opts%,$(RUNTESTFLAGS)))" ] \
- && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+ -rm -rf $(TESTSUITEDIR)/$*-parallel
+ @if [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+ test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR) || true; \
+ test -d $(TESTSUITEDIR)/$*-parallel || mkdir $(TESTSUITEDIR)/$*-parallel || true; \
+ GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/$(TESTSUITEDIR)/$(check_p_tool)-parallel ; \
+ export GCC_RUNTEST_PARALLELIZE_DIR ; \
$(MAKE) TESTSUITEDIR="$(TESTSUITEDIR)" RUNTESTFLAGS="$(RUNTESTFLAGS)" \
check-parallel-$* \
$(patsubst %,check-parallel-$*_%, $(check_p_subdirs)); \
- for file in $(TESTSUITEDIR)/$*/$* \
- $(patsubst %,$(TESTSUITEDIR)/$*%/$*,$(check_p_subdirs));\
+ sums= ; logs= ; \
+ for dir in $(TESTSUITEDIR)/$* \
+ $(patsubst %,$(TESTSUITEDIR)/$*%,$(check_p_subdirs));\
do \
- mv -f $$file.sum $$file.sum.sep; mv -f $$file.log $$file.log.sep; \
+ if [ -d $$dir ]; then \
+ mv -f $$dir/$*.sum $$dir/$*.sum.sep; mv -f $$dir/$*.log $$dir/$*.log.sep; \
+ sums="$$sums $$dir/$*.sum.sep"; logs="$$logs $$dir/$*.log.sep"; \
+ fi; \
done; \
- $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh \
- $(TESTSUITEDIR)/$*/$*.sum.sep \
- $(patsubst %,$(TESTSUITEDIR)/$*%/$*.sum.sep,$(check_p_subdirs)) \
+ $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh $$sums \
> $(TESTSUITEDIR)/$*/$*.sum; \
- $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh -L \
- $(TESTSUITEDIR)/$*/$*.log.sep \
- $(patsubst %,$(TESTSUITEDIR)/$*%/$*.log.sep,$(check_p_subdirs)) \
+ $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh -L $$logs \
> $(TESTSUITEDIR)/$*/$*.log; \
+ rm -rf $(TESTSUITEDIR)/$*-parallel || true; \
else \
$(MAKE) TESTSUITEDIR="$(TESTSUITEDIR)" RUNTESTFLAGS="$(RUNTESTFLAGS)" \
check_$*_parallelize= check-parallel-$*; \
fi
-# Just print the parallelized subtargets for those that want to split
-# the testing across machines.
-$(patsubst %,%-subtargets,$(lang_checks_parallelized)): check-%-subtargets:
- @echo check-parallel-$* \
- $(patsubst %,check-parallel-$*_%, $(check_p_subdirs))
-
-# In the if [ -n "$(check_p_subno)" ] case runtest should be given the name of
-# the given *.exp file(s). See comment above check_gcc_parallelize variable
-# for details on the content of these variables.
-#
-# In the elif [ -n "$(check_p_vars)" ] case runtest should be given
-# names of all the *.exp files for this tool that aren't already handled by
-# other goals. First it finds all the *.exp files for this tool, then
-# prunes those already specified in check_$lang_parallelize or duplicates.
-#
-# Otherwise check-$lang isn't parallelized and runtest is invoked just with
-# the $(RUNTESTFLAGS) arguments.
check-parallel-% : site.exp
-test -d plugin || mkdir plugin
-test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR)
test -d $(TESTSUITEDIR)/$(check_p_subdir) || mkdir $(TESTSUITEDIR)/$(check_p_subdir)
-(rootme=`${PWD_COMMAND}`; export rootme; \
srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
- cd $(TESTSUITEDIR)/$(check_p_subdir); \
- rm -f tmp-site.exp; \
- sed '/set tmpdir/ s|testsuite$$|$(TESTSUITEDIR)/$(check_p_subdir)|' \
+ if [ -n "$(check_p_subno)" ] \
+ && [ -n "$$GCC_RUNTEST_PARALLELIZE_DIR" ] \
+ && [ -f $(TESTSUITEDIR)/$(check_p_tool)-parallel/finished ]; then \
+ rm -rf $(TESTSUITEDIR)/$(check_p_subdir); \
+ else \
+ cd $(TESTSUITEDIR)/$(check_p_subdir); \
+ rm -f tmp-site.exp; \
+ sed '/set tmpdir/ s|testsuite$$|$(TESTSUITEDIR)/$(check_p_subdir)|' \
< ../../site.exp > tmp-site.exp; \
- $(SHELL) $${srcdir}/../move-if-change tmp-site.exp site.exp; \
- EXPECT=${EXPECT} ; export EXPECT ; \
- if [ -f $${rootme}/../expect/expect ] ; then \
- TCL_LIBRARY=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
- export TCL_LIBRARY ; fi ; \
- runtestflags= ; \
- if [ -n "$(check_p_subno)" ] ; then \
- runtestflags="$(check_p_subwork)"; \
- elif [ -n "$(check_p_vars)" ] ; then \
- parts="`echo ' $(strip $(subst $(check_p_comma), ,$(check_p_vars))) ' \
- | sed 's/=[^ ]* / /g'`"; \
- for part in `find $$srcdir/testsuite/$(check_p_tool)* -name \*.exp` ; do \
- part=`basename $$part` ; \
- case " $$parts $$runtestflags " in \
- *" $$part "*) ;; \
- *) runtestflags="$$runtestflags $$part" ;; \
- esac ; \
- done ; \
- fi ; \
- $(RUNTEST) --tool $(check_p_tool) $(RUNTESTFLAGS) $$runtestflags)
+ $(SHELL) $${srcdir}/../move-if-change tmp-site.exp site.exp; \
+ EXPECT=${EXPECT} ; export EXPECT ; \
+ if [ -f $${rootme}/../expect/expect ] ; then \
+ TCL_LIBRARY=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
+ export TCL_LIBRARY ; \
+ fi ; \
+ $(RUNTEST) --tool $(check_p_tool) $(RUNTESTFLAGS); \
+ if [ -n "$$GCC_RUNTEST_PARALLELIZE_DIR" ] ; then \
+ touch $${rootme}/$(TESTSUITEDIR)/$(check_p_tool)-parallel/finished; \
+ fi ; \
+ fi )
# QMTest targets
+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * gcc-interface/Make-lang.in (check_acats_numbers0,
+ check_acats_numbers1, check_acats_numbers2, check_acats_numbers3,
+ check_acats_numbers4, check_acats_numbers5, check_acats_numbers6,
+ check_acats_numbers, check_acats_subdirs): New variables.
+ (check_acats_targets): Use $(check_acats_subdirs).
+ (check-acats, check-acats%): Rewritten so that for parallelized
+ testing each job runs all the chapters files, with
+ GCC_RUNTEST_PARALLELIZE_DIR set in environment. Prepare the support
+ directory sequentially and share it.
+ (check-acats-subtargets): Always print just check-acats.
+
2014-08-25 Martin Liska <mliska@suse.cz>
* gcc-interface/utils.c (rest_of_subprog_body_compilation): Adjust to
ACATSDIR = $(TESTSUITEDIR)/ada/acats
-check_acats_targets = $(patsubst %,check-acats%, 0 1 2)
+check_acats_numbers0:=1 2 3 4 5 6 7 8 9
+check_acats_numbers1:=0 $(check_acats_numbers0)
+check_acats_numbers2:=$(foreach i,$(check_acats_numbers0),$(addprefix $(i),$(check_acats_numbers1)))
+check_acats_numbers3:=$(addprefix 0,$(check_acats_numbers1)) $(check_acats_numbers2)
+check_acats_numbers4:=$(foreach i,$(check_acats_numbers0),$(addprefix $(i),$(check_acats_numbers3)))
+check_acats_numbers5:=$(addprefix 0,$(check_acats_numbers3)) $(check_acats_numbers4)
+check_acats_numbers6:=$(foreach i,$(check_acats_numbers0),$(addprefix $(i),$(check_acats_numbers5)))
+check_acats_numbers:=$(check_acats_numbers0) $(check_acats_numbers2) $(check_acats_numbers4) $(check_acats_numbers6)
+check_acats_subdirs=$(wordlist 1, \
+ $(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128), \
+ $(check_acats_numbers))
+check_acats_targets = $(addprefix check-acats, $(check_acats_subdirs))
check-acats:
@test -d $(ACATSDIR) || mkdir -p $(ACATSDIR); \
EXPECT=$(EXPECT); export EXPECT; \
if [ -z "$(CHAPTERS)" ] && [ "$(filter -j, $(MFLAGS))" = "-j" ]; \
then \
+ rm -rf $(ACATSDIR)-parallel; \
+ mkdir $(ACATSDIR)-parallel; \
+ ( testdir=`cd ${srcdir}/${ACATSDIR} && ${PWD_COMMAND}`; \
+ export testdir; \
+ cd $(ACATSDIR) && $(SHELL) $${testdir}/run_acats NONE ) \
+ || exit 1; \
+ GCC_RUNTEST_PARALLELIZE_DIR=$$rootme/$(ACATSDIR)-parallel; \
+ export GCC_RUNTEST_PARALLELIZE_DIR; \
$(MAKE) $(check_acats_targets); \
- for idx in 0 1 2; do \
+ rm -rf $(ACATSDIR)-parallel; \
+ acats_sums= ; acats_logs= ; \
+ for idx in "" $(check_acats_subdirs); do \
+ [ -d $(ACATSDIR)$$idx ] || continue; \
mv -f $(ACATSDIR)$$idx/acats.sum $(ACATSDIR)$$idx/acats.sum.sep; \
mv -f $(ACATSDIR)$$idx/acats.log $(ACATSDIR)$$idx/acats.log.sep; \
+ acats_sums="$$acats_sums $(ACATSDIR)$$idx/acats.sum.sep"; \
+ acats_logs="$$acats_logs $(ACATSDIR)$$idx/acats.log.sep"; \
done; \
$(SHELL) $(srcdir)/../contrib/dg-extract-results.sh \
- $(ACATSDIR)0/acats.sum.sep $(ACATSDIR)1/acats.sum.sep \
- $(ACATSDIR)2/acats.sum.sep > $(ACATSDIR)/acats.sum; \
+ $$acats_sums > $(ACATSDIR)/acats.sum; \
$(SHELL) $(srcdir)/../contrib/dg-extract-results.sh -L \
- $(ACATSDIR)0/acats.log.sep $(ACATSDIR)1/acats.log.sep \
- $(ACATSDIR)2/acats.log.sep > $(ACATSDIR)/acats.log; \
+ $$acats_logs > $(ACATSDIR)/acats.log; \
exit 0; \
fi; \
testdir=`cd ${srcdir}/${ACATSDIR} && ${PWD_COMMAND}`; \
export testdir; cd $(ACATSDIR) && $(SHELL) $${testdir}/run_acats $(CHAPTERS)
check-acats-subtargets:
- @echo $(check_acats_targets)
+ @echo check-acats
# Parallelized check-acats
$(check_acats_targets): check-acats%:
+ if [ -f $$GCC_RUNTEST_PARALLELIZE_DIR/finished ]; then \
+ rm -rf $(ACATSDIR)$*; exit 0; \
+ fi; \
test -d $(ACATSDIR)$* || mkdir -p $(ACATSDIR)$*; \
testdir=`cd ${srcdir}/${ACATSDIR} && ${PWD_COMMAND}`; \
- case "$*" in \
- 0) chapters="`cd $$testdir/tests; echo [a-b]* c[0-4]*`";; \
- 1) chapters="`cd $$testdir/tests; echo c[5-9ab]*`";; \
- 2) chapters="`cd $$testdir/tests; echo c[c-z]* [d-z]*`";; \
- esac; \
- export testdir; cd $(ACATSDIR)$* && $(SHELL) $${testdir}/run_acats $$chapters
+ export testdir; cd $(ACATSDIR)$* && $(SHELL) $${testdir}/run_acats
+ touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished
.PHONY: check-acats $(check_acats_targets)
\f
+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * Make-lang.in (check_g++_parallelize): Change to just an upper bound
+ number.
+
2014-09-13 Marek Polacek <polacek@redhat.com>
PR c++/60862
lang_checks += check-g++
lang_checks_parallelized += check-g++
# For description see comment above check_gcc_parallelize in gcc/Makefile.in.
-check_g++_parallelize = old-deja.exp \
- dg.exp=g++.dg/[0-9A-Za-bd-su-z]* \
- dg.exp=g++.dg/[ct]* \
- dg.exp=c-c++-common/*,dg-torture.exp
-
+check_g++_parallelize = 10000
#\f
# Install hooks:
# cc1plus is installed elsewhere as part of $(COMPILERS).
+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * Make-lang.in (check_gfortran_parallelize): Change to just an upper
+ bound number.
+
2014-09-13 Tobias Burnus <burnus@net-b.de>
PR fortran/63252
lang_checks += check-gfortran
lang_checks_parallelized += check-gfortran
# For description see comment above check_gcc_parallelize in gcc/Makefile.in.
-check_gfortran_parallelize = dg.exp=gfortran.dg/\[adAD\]* \
- dg.exp=gfortran.dg/\[bcBC\]* \
- dg.exp=gfortran.dg/\[nopNOP\]* \
- dg.exp=gfortran.dg/\[isuvISUV\]* \
- dg.exp=gfortran.dg/\[efhkqrxzEFHKQRXZ\]* \
- dg.exp=gfortran.dg/\[0-9gjlmtwyGJLMTWY\]*
+check_gfortran_parallelize = 10000
# GFORTRAN documentation.
GFORTRAN_TEXI = \
+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * Make-lang.in (check_go_parallelize): Change to just an upper bound
+ number.
+
2014-09-03 Chris Manghane <cmang@google.com>
* go-gcc.cc (Gcc_backend::implicit_variable): Remove init
lang_checks += check-go
lang_checks_parallelized += check-go
-check_go_parallelize = go-test.exp=*/test/\[0-57-9a-bd-hj-qs-zA-Z\]* \
- go-test.exp=*/test/c* \
- go-test.exp=*/test/i* \
- go-test.exp=*/test/r* \
- go-test.exp=*/test/6*
+check_go_parallelize = 10
# Install hooks.
+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * Make-lang.in (check_objc_parallelize): Change to just an upper
+ bound number.
+
2014-07-14 Jan Hubicka <hubicka@ucw.cz>
* objc-act.c (objc_common_tree_size): New function.
# The following allows you to do 'make check-objc -j2'. The
# execute.exp tests will be run in parallel with all the other ones.
lang_checks_parallelized += check-objc
-check_objc_parallelize = gnu-encoding.exp execute.exp exceptions.exp
+check_objc_parallelize = 6
#\f
# Install hooks:
+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * lib/gcc-defs.exp (gcc_parallel_test_run_p,
+ gcc_parallel_test_enable): New procedures. If
+ GCC_RUNTEST_PARALLELIZE_DIR is set in environment, override
+ runtest_file_p to invoke also gcc_parallel_test_run_p.
+ * g++.dg/guality/guality.exp (check_guality): Save/restore
+ test_counts array around the body of the procedure.
+ * gcc.dg/guality/guality.exp (check_guality): Likewise.
+ * g++.dg/plugin/plugin.exp: Run all the tests serially
+ by the first parallel runtest encountering it.
+ * gcc.dg/plugin/plugin.exp: Likewise.
+ * gcc.misc-tests/matrix1.exp: Likewise.
+ * gcc.misc-tests/dhry.exp: Likewise.
+ * gcc.misc-tests/acker1.exp: Likewise.
+ * gcc.misc-tests/linkage.exp: Likewise.
+ * gcc.misc-tests/mg.exp: Likewise.
+ * gcc.misc-tests/mg-2.exp: Likewise.
+ * gcc.misc-tests/sort2.exp: Likewise.
+ * gcc.misc-tests/sieve.exp: Likewise.
+ * gcc.misc-tests/options.exp: Likewise.
+ * gcc.misc-tests/help.exp: Likewise.
+ * go.test/go-test.exp (go-gc-tests): Use
+ gcc_parallel_test_enable {0, 1} around all handling of
+ each test.
+ * objc.dg/gnu-encoding/gnu-encoding.exp: Likewise.
+ * ada/acats/run_all.sh: Parallelize using mkdir inside of
+ a shared directory. Avoid forking and expr uses if
+ shell supports $(()).
+
2014-09-14 David Sherwood <david.sherwood@arm.com>
* gcc.target/aarch64/vdup_lane_2.c (force_simd): Emit simd mov.
# End of customization section.
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
display_noeol () {
printf "$@"
printf "$@" >> $dir/acats.sum
gnatls -v >> $dir/acats.log
display ""
+if [ -n "$GCC_RUNTEST_PARALLELIZE_DIR" ]; then
+ dir_support=$dir/../acats/support
+
+ rm -rf $dir/run
+ mv $dir/tests $dir/tests.$$ 2> /dev/null
+ rm -rf $dir/tests.$$ &
+ mkdir -p $dir/run
+
+ cp -pr $dir/../acats/tests $dir/
+else
+ dir_support=$dir/support
+
display " === acats support ==="
display_noeol "Generating support files..."
display " done."
display ""
+
+fi
+
display " === acats tests ==="
if [ $# -eq 0 ]; then
glob_countn=0
glob_countok=0
glob_countu=0
+par_count=0
+par_countm=0
+par_last=
for chapter in $chapters; do
+ # Used to generate support once and finish after that.
+ [ "$chapter" = "NONE" ] && continue
+
display Running chapter $chapter ...
if [ ! -d $dir/tests/$chapter ]; then
cd $dir/tests/$chapter
ls *.a *.ada *.adt *.am *.dep 2> /dev/null | sed -e 's/\(.*\)\..*/\1/g' | \
- cut -c1-7 | sort | uniq | comm -23 - $dir/support/norun.lst \
+ cut -c1-7 | sort | uniq | comm -23 - $dir_support/norun.lst \
> $dir/tests/$chapter/${chapter}.lst
countn=`wc -l < $dir/tests/$chapter/${chapter}.lst`
- glob_countn=`expr $glob_countn + $countn`
- counti=0
+ as_fn_arith $glob_countn + $countn
+ glob_countn=$as_val
for i in `cat $dir/tests/$chapter/${chapter}.lst`; do
- counti=`expr $counti + 1`
+
+ # If running multiple run_all.sh jobs in parallel, decide
+ # if we should run this test in the current instance.
+ if [ -n "$GCC_RUNTEST_PARALLELIZE_DIR" ]; then
+ case "$i" in
+ # Ugh, some tests have inter-test dependencies, those
+ # tests have to be scheduled on the same parallel instance
+ # as previous test.
+ ce2108f | ce2108h | ce3112d) ;;
+ # All others can be hopefully scheduled freely.
+ *)
+ as_fn_arith $par_countm + 1
+ par_countm=$as_val
+ [ $par_countm -eq 10 ] && par_countm=0
+ if [ $par_countm -eq 1 ]; then
+ as_fn_arith $par_count + 1
+ par_count=$as_val
+ if mkdir $GCC_RUNTEST_PARALLELIZE_DIR/$par_count; then
+ par_last=1
+ else
+ par_last=
+ fi
+ fi;;
+ esac
+ if [ -z "$par_last" ]; then
+ as_fn_arith $glob_countn - 1
+ glob_countn=$as_val
+ continue
+ fi
+ fi
+
extraflags="-gnat95"
grep $i $testdir/overflow.lst > /dev/null 2>&1
if [ $? -eq 0 ]; then
echo "BUILD $main" >> $dir/acats.log
EXTERNAL_OBJECTS=""
case $i in
- cxb30*) EXTERNAL_OBJECTS="$dir/support/cxb30040.o $dir/support/cxb30060.o $dir/support/cxb30130.o $dir/support/cxb30131.o";;
+ cxb30*) EXTERNAL_OBJECTS="$dir_support/cxb30040.o $dir_support/cxb30060.o $dir_support/cxb30130.o $dir_support/cxb30131.o";;
ca1020e) rm -f ca1020e_func1.adb ca1020e_func2.adb ca1020e_proc1.adb ca1020e_proc2.adb > /dev/null 2>&1;;
ca14028) rm -f ca14028_func2.ads ca14028_func3.ads ca14028_proc1.ads ca14028_proc3.ads > /dev/null 2>&1;;
esac
continue
fi
- target_gnatmake $extraflags -I$dir/support $main >> $dir/acats.log 2>&1
+ target_gnatmake $extraflags -I$dir_support $main >> $dir/acats.log 2>&1
if [ $? -ne 0 ]; then
display "FAIL: $i"
failed="${failed}${i} "
failed="${failed}${i} "
else
log "UNSUPPORTED: $i"
- glob_countn=`expr $glob_countn - 1`
- glob_countu=`expr $glob_countu + 1`
+ as_fn_arith $glob_countn - 1
+ glob_countn=$as_val
+ as_fn_arith $glob_countu + 1
+ glob_countu=$as_val
fi
else
log "PASS: $i"
- glob_countok=`expr $glob_countok + 1`
+ as_fn_arith $glob_countok + 1
+ glob_countok=$as_val
fi
clean_dir
done
}
proc check_guality {args} {
+ # Don't count check_guality as PASS, or FAIL etc., that would make
+ # the total PASS count dependent on how many parallel runtest invocations
+ # ran guality.exp. So save the counts first and restore them afterwards.
+ global test_counts
+ array set saved_test_counts [array get test_counts]
set result [eval check_compile guality_check executable $args "-g -O0"]
set lines [lindex $result 0]
set output [lindex $result 1]
set ret [string match "*1 PASS, 0 FAIL, 0 UNRESOLVED*" $execout]
}
remote_file build delete $output
+ array get test_counts [array get saved_test_counts]
return $ret
}
# Load support procs.
load_lib plugin-support.exp
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p plugin] {
+ return
+}
+gcc_parallel_test_enable 0
+
# Specify the plugin source file and the associated test files in a list.
# plugin_test_list={ {plugin1 test1 test2 ...} {plugin2 test1 ...} ... }
set plugin_test_list [list \
set plugin_input_tests [lreplace $plugin_test 0 0]
plugin-test-execute $plugin_src $plugin_input_tests
}
+
+gcc_parallel_test_enable 1
}
proc check_guality {args} {
+ # Don't count check_guality as PASS, or FAIL etc., that would make
+ # the total PASS count dependent on how many parallel runtest invocations
+ # ran guality.exp. So save the counts first and restore them afterwards.
+ global test_counts
+ array set saved_test_counts [array get test_counts]
set result [eval check_compile guality_check executable $args "-g -O0"]
set lines [lindex $result 0]
set output [lindex $result 1]
set ret [string match "*1 PASS, 0 FAIL, 0 UNRESOLVED*" $execout]
}
remote_file build delete $output
+ array set test_counts [array get saved_test_counts]
return $ret
}
# Load support procs.
load_lib plugin-support.exp
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p plugin] {
+ return
+}
+gcc_parallel_test_enable 0
+
# Specify the plugin source file and the associated test files in a list.
# plugin_test_list={ {plugin1 test1 test2 ...} {plugin2 test1 ...} ... }
set plugin_test_list [list \
# All done.
dg-finish
+
+gcc_parallel_test_enable 1
}
load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p acker1] {
+ return
+}
+gcc_parallel_test_enable 0
prebase
set actions run
set compiler_output "^$"
set program_output "^$"
postbase acker1.c $run $groups
+
+gcc_parallel_test_enable 1
}
load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p dhry] {
+ return
+}
+gcc_parallel_test_enable 0
prebase
set actions run
set compiler_output "^$"
set program_output "^$"
postbase dhry.c $run $groups
+
+gcc_parallel_test_enable 1
# documented in --help, and that the various --help* options work.
load_lib options.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p help] {
+ return
+}
+gcc_parallel_test_enable 0
# Document --version. Ideally, there should be no undocumented switches
# in --help.
check_for_options c "--help=joined,undocumented" "" "" ""
# Listing only excludes gives empty results.
check_for_options c "--help=^joined,^separate" "" "" ""
+
+gcc_parallel_test_enable 1
# was written by Rob Savoye. (rob@cygnus.com)
# All the other tests driven by that file have since been moved elsewhere.
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p linkage] {
+ return
+}
+gcc_parallel_test_enable 0
+
if { [isnative] && ![is_remote host] } then {
set lines [gcc_target_compile "$srcdir/$subdir/linkage-x.c" "linkage-x.o" object {additional_flags="-w"}]
if ![string match "" $lines] then {
file delete "linkage-x.o"
}
}
+
+gcc_parallel_test_enable 1
}
load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p matrix1] {
+ return
+}
+gcc_parallel_test_enable 0
prebase
set actions run
set compiler_output "^$"
set program_output "^$"
postbase matrix1.c $run $groups
+
+gcc_parallel_test_enable 1
# Test the -MG flag with a system header file.
load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p mg-2] {
+ return
+}
+gcc_parallel_test_enable 0
prebase
set actions none-of-the-above
set compiler_output "mg-2.o ?: .*mg-2.c \[ \\\\\n\]*nonexist.h"
postbase mg-2.c "" "" "-MM -MG"
+
+gcc_parallel_test_enable 1
# Test the -MG flag.
load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p mg] {
+ return
+}
+gcc_parallel_test_enable 0
prebase
set actions none-of-the-above
set compiler_output "mg.o ?: .*mg.c \[ \\\\\n\]*nonexist.h"
postbase mg.c "" "" "-MM -MG"
+
+gcc_parallel_test_enable 1
# match the patterns COMPILER_PATTERN, AS_PATTERN and LD_PATTERN,
# respectively.
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p options] {
+ return
+}
+gcc_parallel_test_enable 0
+
proc check_for_all_options {language gcc_options compiler_pattern as_pattern ld_pattern} {
set filename test-[pid]
set fd [open $filename.c w]
}
check_for_all_options c {--coverage} {-fprofile-arcs -ftest-coverage} {} {-lgcov}
+
+gcc_parallel_test_enable 1
}
load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p sieve] {
+ return
+}
+gcc_parallel_test_enable 0
prebase
set actions run
set compiler_output "^$"
set program_output "^$"
postbase sieve.c $run $groups
+
+gcc_parallel_test_enable 1
}
load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file. The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p sort2] {
+ return
+}
+gcc_parallel_test_enable 0
prebase
set actions run
set compiler_output "^$"
set program_output "^$"
postbase sort2.c $run $groups
+
+gcc_parallel_test_enable 1
close $fd
+ # runtest_file_p is already run above, and the code below can run
+ # runtest_file_p again, make sure everything for this test is
+ # performed if the above runtest_file_p decided this runtest
+ # instance should execute the test
+ gcc_parallel_test_enable 0
+
set go_compile_args ""
set go_execute_args ""
if { [regexp "// run (\[^|&>2\].*)\$" $test_line match progargs] \
set go_compile_args ""
set go_execute_args ""
set TORTURE_OPTIONS [list { -O2 -g }]
+ gcc_parallel_test_enable 1
}
set dg-do-what-default ${saved-dg-do-what-default}
}
}
+if { [info exists env(GCC_RUNTEST_PARALLELIZE_DIR)] \
+ && [info procs runtest_file_p] != [list] \
+ && [info procs gcc_parallelize_saved_runtest_file_p] == [list] } then {
+ global gcc_runtest_parallelize_counter
+ global gcc_runtest_parallelize_counter_minor
+ global gcc_runtest_parallelize_enable
+ global gcc_runtest_parallelize_dir
+ global gcc_runtest_parallelize_last
+
+ set gcc_runtest_parallelize_counter 0
+ set gcc_runtest_parallelize_counter_minor 0
+ set gcc_runtest_parallelize_enable 1
+ set gcc_runtest_parallelize_dir [getenv GCC_RUNTEST_PARALLELIZE_DIR]
+ set gcc_runtest_parallelize_last 0
+
+ proc gcc_parallel_test_run_p { testcase } {
+ global gcc_runtest_parallelize_counter
+ global gcc_runtest_parallelize_counter_minor
+ global gcc_runtest_parallelize_enable
+ global gcc_runtest_parallelize_dir
+ global gcc_runtest_parallelize_last
+
+ if { $gcc_runtest_parallelize_enable == 0 } {
+ return 1
+ }
+
+ # Only test the filesystem every 10th iteration
+ incr gcc_runtest_parallelize_counter_minor
+ if { $gcc_runtest_parallelize_counter_minor == 10 } {
+ set gcc_runtest_parallelize_counter_minor 0
+ }
+ if { $gcc_runtest_parallelize_counter_minor != 1 } {
+ #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter $gcc_runtest_parallelize_last"
+ return $gcc_runtest_parallelize_last
+ }
+
+ set path $gcc_runtest_parallelize_dir/$gcc_runtest_parallelize_counter
+
+ if {![catch {open $path {RDWR CREAT EXCL} 0600} fd]} {
+ close $fd
+ set gcc_runtest_parallelize_last 1
+ #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 1"
+ incr gcc_runtest_parallelize_counter
+ return 1
+ }
+ set gcc_runtest_parallelize_last 0
+ #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 0"
+ incr gcc_runtest_parallelize_counter
+ return 0
+ }
+
+ proc gcc_parallel_test_enable { val } {
+ global gcc_runtest_parallelize_enable
+ set gcc_runtest_parallelize_enable $val
+ }
+
+ rename runtest_file_p gcc_parallelize_saved_runtest_file_p
+ proc runtest_file_p { runtests testcase } {
+ if ![gcc_parallelize_saved_runtest_file_p $runtests $testcase] {
+ return 0
+ }
+ return [gcc_parallel_test_run_p $testcase]
+ }
+
+} else {
+
+ proc gcc_parallel_test_run_p { testcase } {
+ return 1
+ }
+
+ proc gcc_parallel_test_enable { val } {
+ }
+
+}
+
# Like dg-options, but adds to the default options rather than replacing them.
proc dg-additional-options { args } {
continue
}
+ gcc_parallel_test_enable 0
dg-runtest $src "" $DEFAULT_CFLAGS
+ gcc_parallel_test_enable 1
}
} else {
warning "Could not execute objc.dg/gnu-encoding/struct-layout-encoding-1 generator"
+2014-09-15 Jakub Jelinek <jakub@redhat.com>
+
+ * testsuite/Makefile.am (check_p_numbers0, check_p_numbers1,
+ check_p_numbers2, check_p_numbers3, check_p_numbers4,
+ check_p_numbers5, check_p_numbers6, check_p_numbers,
+ check_p_subdirs): New variables.
+ (check_DEJAGNU_normal_targets): Use check_p_subdirs.
+ (check-DEJAGNU): Rewritten so that for parallelized
+ testing each job runs all the *.exp files, with
+ GCC_RUNTEST_PARALLELIZE_DIR set in environment.
+ * testsuite/Makefile.in: Regenerated.
+ * testsuite/lib/libstdc++.exp (gcc_parallel_test_run_p,
+ gcc_parallel_test_enable): New procedures. If
+ GCC_RUNTEST_PARALLELIZE_DIR is set in environment, override
+ runtest_file_p to invoke also gcc_parallel_test_run_p.
+ * testsuite/libstdc++-abi/abi.exp: Run all the tests serially
+ by the first parallel runtest encountering it. Fix up path
+ of the extract_symvers script.
+ * testsuite/libstdc++-xmethods/xmethods.exp: Run all the tests
+ serially by the first parallel runtest encountering it. Run
+ dg-finish even in case of error.
+
2014-09-15 Jonathan Wakely <jwakely@redhat.com>
* include/bits/regex.h (basic_regex): Rename _Ch_typeraits template
@test ! -f $*/site.exp || mv $*/site.exp $*/site.bak
@mv $*/site.exp.tmp $*/site.exp
-check_DEJAGNU_normal_targets = $(patsubst %,check-DEJAGNUnormal%,0 1 2 3 4 5 6 7 8 9 10)
+check_p_numbers0:=1 2 3 4 5 6 7 8 9
+check_p_numbers1:=0 $(check_p_numbers0)
+check_p_numbers2:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
+check_p_numbers3:=$(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
+check_p_numbers4:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
+check_p_numbers5:=$(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
+check_p_numbers6:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
+check_p_numbers:=$(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
+check_p_subdirs=$(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers))
+check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs))
$(check_DEJAGNU_normal_targets): check-DEJAGNUnormal%: normal%/site.exp
# Run the testsuite in normal mode.
check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
AR="$(AR)"; export AR; \
RANLIB="$(RANLIB)"; export RANLIB; \
- if [ -z "$*$(filter-out --target_board=%, $(RUNTESTFLAGS))" ] \
- && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+ if [ -z "$*" ] && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+ rm -rf normal-parallel || true; \
+ mkdir normal-parallel; \
$(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \
- for idx in 0 1 2 3 4 5 6 7 8 9 10; do \
- mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
- mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+ rm -rf normal-parallel || true; \
+ for idx in $(check_p_subdirs); do \
+ if [ -d normal$$idx ]; then \
+ mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
+ mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+ fi; \
done; \
- mv -f libstdc++.sum libstdc++.sum.sep; \
- mv -f libstdc++.log libstdc++.log.sep; \
$(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \
- libstdc++.sum.sep normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
+ normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
$(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \
- libstdc++.log.sep normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
+ normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
exit 0; \
fi; \
srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
runtest=$(RUNTEST); \
if [ -z "$$runtest" ]; then runtest=runtest; fi; \
tool=libstdc++; \
- dirs=; \
- case "$*" in \
- normal0) \
- if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
- $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
- $(RUNTESTFLAGS) abi.exp prettyprinters.exp; \
- else echo "WARNING: could not find \`runtest'" 1>&2; :;\
- fi; \
- dirs="`cd $$srcdir; echo [013-9][0-9]_*/*`";; \
- normal1) \
- dirs="`cd $$srcdir; echo [ab]* de* [ep]*/*`";; \
- normal2) \
- dirs="`cd $$srcdir; echo 2[01]_*/*`";; \
- normal3) \
- dirs="`cd $$srcdir; echo 22_*/*`";; \
- normal4) \
- dirs="`cd $$srcdir; echo 23_*/[a-km-tw-z]*`";; \
- normal5) \
- dirs="`cd $$srcdir; echo 23_*/[luv]*`";; \
- normal6) \
- dirs="`cd $$srcdir; echo 2[459]_*/*`";; \
- normal7) \
- dirs="`cd $$srcdir; echo 26_*/* 28_*/[c-z]*`";; \
- normal8) \
- dirs="`cd $$srcdir; echo 27_*/*`";; \
- normal9) \
- dirs="`cd $$srcdir; echo 28_*/[ab]*`";; \
- normal10) \
- dirs="`cd $$srcdir; echo t*/*`";; \
- esac; \
- if [ -n "$*" ]; then cd "$*"; fi; \
+ if [ -n "$*" ]; then \
+ if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \
+ GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \
+ export GCC_RUNTEST_PARALLELIZE_DIR; \
+ cd "$*"; \
+ fi; \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
- if [ -n "$$dirs" ]; then \
- $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
- $(RUNTESTFLAGS) \
- "conformance.exp=`echo $$dirs | sed 's/ /* /g;s/$$/*/'`"; \
- else \
- $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
+ $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
$(RUNTESTFLAGS); \
+ if [ -n "$*" ]; then \
+ touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \
fi; \
- else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+ else \
+ echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi
check-am:
extract_symvers = $(glibcxx_builddir)/scripts/extract_symvers
baseline_subdir := $(shell $(CXX) $(baseline_subdir_switch))
-check_DEJAGNU_normal_targets = $(patsubst %,check-DEJAGNUnormal%,0 1 2 3 4 5 6 7 8 9 10)
+check_p_numbers0:=1 2 3 4 5 6 7 8 9
+check_p_numbers1:=0 $(check_p_numbers0)
+check_p_numbers2:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
+check_p_numbers3:=$(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
+check_p_numbers4:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
+check_p_numbers5:=$(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
+check_p_numbers6:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
+check_p_numbers:=$(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
+check_p_subdirs=$(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers))
+check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs))
# Runs the testsuite, but in compile only mode.
# Can be used to test sources with non-GNU FE's at various warning
check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
AR="$(AR)"; export AR; \
RANLIB="$(RANLIB)"; export RANLIB; \
- if [ -z "$*$(filter-out --target_board=%, $(RUNTESTFLAGS))" ] \
- && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+ if [ -z "$*" ] && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+ rm -rf normal-parallel || true; \
+ mkdir normal-parallel; \
$(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \
- for idx in 0 1 2 3 4 5 6 7 8 9 10; do \
- mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
- mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+ rm -rf normal-parallel || true; \
+ for idx in $(check_p_subdirs); do \
+ if [ -d normal$$idx ]; then \
+ mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
+ mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+ fi; \
done; \
- mv -f libstdc++.sum libstdc++.sum.sep; \
- mv -f libstdc++.log libstdc++.log.sep; \
$(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \
- libstdc++.sum.sep normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
+ normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
$(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \
- libstdc++.log.sep normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
+ normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
exit 0; \
fi; \
srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
runtest=$(RUNTEST); \
if [ -z "$$runtest" ]; then runtest=runtest; fi; \
tool=libstdc++; \
- dirs=; \
- case "$*" in \
- normal0) \
- if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
- $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
- $(RUNTESTFLAGS) abi.exp prettyprinters.exp; \
- else echo "WARNING: could not find \`runtest'" 1>&2; :;\
- fi; \
- dirs="`cd $$srcdir; echo [013-9][0-9]_*/*`";; \
- normal1) \
- dirs="`cd $$srcdir; echo [ab]* de* [ep]*/*`";; \
- normal2) \
- dirs="`cd $$srcdir; echo 2[01]_*/*`";; \
- normal3) \
- dirs="`cd $$srcdir; echo 22_*/*`";; \
- normal4) \
- dirs="`cd $$srcdir; echo 23_*/[a-km-tw-z]*`";; \
- normal5) \
- dirs="`cd $$srcdir; echo 23_*/[luv]*`";; \
- normal6) \
- dirs="`cd $$srcdir; echo 2[459]_*/*`";; \
- normal7) \
- dirs="`cd $$srcdir; echo 26_*/* 28_*/[c-z]*`";; \
- normal8) \
- dirs="`cd $$srcdir; echo 27_*/*`";; \
- normal9) \
- dirs="`cd $$srcdir; echo 28_*/[ab]*`";; \
- normal10) \
- dirs="`cd $$srcdir; echo t*/*`";; \
- esac; \
- if [ -n "$*" ]; then cd "$*"; fi; \
+ if [ -n "$*" ]; then \
+ if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \
+ GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \
+ export GCC_RUNTEST_PARALLELIZE_DIR; \
+ cd "$*"; \
+ fi; \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
- if [ -n "$$dirs" ]; then \
- $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
- $(RUNTESTFLAGS) \
- "conformance.exp=`echo $$dirs | sed 's/ /* /g;s/$$/*/'`"; \
- else \
- $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
+ $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
$(RUNTESTFLAGS); \
+ if [ -n "$*" ]; then \
+ touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \
fi; \
- else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+ else \
+ echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi
check-am:
}
set additional_prunes ""
+
+if { [info exists env(GCC_RUNTEST_PARALLELIZE_DIR)] \
+ && [info procs runtest_file_p] != [list] \
+ && [info procs gcc_parallelize_saved_runtest_file_p] == [list] } then {
+ global gcc_runtest_parallelize_counter
+ global gcc_runtest_parallelize_counter_minor
+ global gcc_runtest_parallelize_enable
+ global gcc_runtest_parallelize_dir
+ global gcc_runtest_parallelize_last
+
+ set gcc_runtest_parallelize_counter 0
+ set gcc_runtest_parallelize_counter_minor 0
+ set gcc_runtest_parallelize_enable 1
+ set gcc_runtest_parallelize_dir [getenv GCC_RUNTEST_PARALLELIZE_DIR]
+ set gcc_runtest_parallelize_last 0
+
+ proc gcc_parallel_test_run_p { testcase } {
+ global gcc_runtest_parallelize_counter
+ global gcc_runtest_parallelize_counter_minor
+ global gcc_runtest_parallelize_enable
+ global gcc_runtest_parallelize_dir
+ global gcc_runtest_parallelize_last
+
+ if { $gcc_runtest_parallelize_enable == 0 } {
+ return 1
+ }
+
+ # Only test the filesystem every 10th iteration
+ incr gcc_runtest_parallelize_counter_minor
+ if { $gcc_runtest_parallelize_counter_minor == 10 } {
+ set gcc_runtest_parallelize_counter_minor 0
+ }
+ if { $gcc_runtest_parallelize_counter_minor != 1 } {
+ #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter $gcc_runtest_parallelize_last"
+ return $gcc_runtest_parallelize_last
+ }
+
+ set path $gcc_runtest_parallelize_dir/$gcc_runtest_parallelize_counter
+
+ if {![catch {open $path {RDWR CREAT EXCL} 0600} fd]} {
+ close $fd
+ set gcc_runtest_parallelize_last 1
+ #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 1"
+ incr gcc_runtest_parallelize_counter
+ return 1
+ }
+ set gcc_runtest_parallelize_last 0
+ #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 0"
+ incr gcc_runtest_parallelize_counter
+ return 0
+ }
+
+ proc gcc_parallel_test_enable { val } {
+ global gcc_runtest_parallelize_enable
+ set gcc_runtest_parallelize_enable $val
+ }
+
+ rename runtest_file_p gcc_parallelize_saved_runtest_file_p
+ proc runtest_file_p { runtests testcase } {
+ if ![gcc_parallelize_saved_runtest_file_p $runtests $testcase] {
+ return 0
+ }
+ return [gcc_parallel_test_run_p $testcase]
+ }
+
+} else {
+
+ proc gcc_parallel_test_run_p { testcase } {
+ return 1
+ }
+
+ proc gcc_parallel_test_enable { val } {
+ }
+
+}
# this test. Or, hey, if we don't support this kind of symbol
# versioning test: don't run it.
+# Only run whole abi.exp in one instance, serially.
+if ![gcc_parallel_test_run_p abi] {
+ return
+}
+gcc_parallel_test_enable 0
+
if { [string match "*-*-darwin*" $target_triplet] } {
set lib $blddir/src/.libs/libstdc++.dylib
} else {
if { (${v3-symver} == 0) || ![info exists baseline_dir] \
|| ![file exists $baseline_dir] \
|| ![file exists $lib] } {
+ gcc_parallel_test_enable 1
return
}
set baseline_file [file join $baseline_dir "baseline_symbols.txt"]
}
if ![file exists $baseline_file] {
+ gcc_parallel_test_enable 1
return
}
send_log "Checking $lib against $baseline_file\n"
# Figure out what symbols are defined by the active build of the library.
-remote_exec "build" "$objdir/../scripts/extract_symvers" \
+remote_exec "build" "$blddir/scripts/extract_symvers" \
[list $lib "current_symbols.txt"]
# Build the abi_check program.
[list "--check-verbose" "current_symbols.txt" \
"baseline_symbols.txt"]]
[lindex $result 0] "libstdc++-abi/abi_check"
+
+gcc_parallel_test_enable 1
load_lib gdb-test.exp
+# Only run whole xmethods.exp in one instance, serially.
+if ![gcc_parallel_test_run_p xmethods] {
+ return
+}
+gcc_parallel_test_enable 0
+
dg-init
v3-build_support
}
if {! [gdb_version_check_xmethods]} {
+ dg-finish
unsupported "xmethods.exp"
+ gcc_parallel_test_enable 1
return
}
}
dg-finish
+gcc_parallel_test_enable 1
projects / thirdparty / gcc.git / commitdiff
