update nl80211.h

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

diff --git a/nl80211.h b/nl80211.h
index c59fec406da5e304c96231b6d3e57fab78e163db..88eb85c63029b311351062709fbad385085f9382 100644 (file)
--- a/nl80211.h
+++ b/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2022 Intel Corporation
+ * Copyright (C) 2018-2023 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -1309,6 +1309,11 @@
  *     The number of peers that HW timestamping can be enabled for concurrently
  *     is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS.
  *
+ * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD
+ *     setup links due to AP MLD removing the corresponding affiliated APs with
+ *     Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
+ *     information about the removed STA MLD setup links.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1562,6 +1567,8 @@ enum nl80211_commands {
 
        NL80211_CMD_SET_HW_TIMESTAMP,
 
+       NL80211_CMD_LINKS_REMOVED,
+
        /* add new commands above here */
 
        /* used to define NL80211_CMD_MAX below */
@@ -2805,6 +2812,9 @@ enum nl80211_commands {
  *     index. If the userspace includes more RNR elements than number of
  *     MBSSID elements then these will be added in every EMA beacon.
  *
+ * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
+ *     disabled.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3341,6 +3351,8 @@ enum nl80211_attrs {
 
        NL80211_ATTR_EMA_RNR_ELEMS,
 
+       NL80211_ATTR_MLO_LINK_DISABLED,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -3667,6 +3679,13 @@ enum nl80211_eht_ru_alloc {
  *     (u8, see &enum nl80211_eht_gi)
  * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
  *     non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
+ * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10)
+ * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4)
+ * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate
+ * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate
+ * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
+ * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
+ * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -3693,6 +3712,13 @@ enum nl80211_rate_info {
        NL80211_RATE_INFO_EHT_NSS,
        NL80211_RATE_INFO_EHT_GI,
        NL80211_RATE_INFO_EHT_RU_ALLOC,
+       NL80211_RATE_INFO_S1G_MCS,
+       NL80211_RATE_INFO_S1G_NSS,
+       NL80211_RATE_INFO_1_MHZ_WIDTH,
+       NL80211_RATE_INFO_2_MHZ_WIDTH,
+       NL80211_RATE_INFO_4_MHZ_WIDTH,
+       NL80211_RATE_INFO_8_MHZ_WIDTH,
+       NL80211_RATE_INFO_16_MHZ_WIDTH,
 
        /* keep last */
        __NL80211_RATE_INFO_AFTER_LAST,
@@ -4424,6 +4450,7 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
  * @NL80211_RRF_NO_HE: HE operation not allowed
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
+ * @NL80211_RRF_NO_EHT: EHT operation not allowed
  */
 enum nl80211_reg_rule_flags {
        NL80211_RRF_NO_OFDM             = 1<<0,
@@ -4443,6 +4470,7 @@ enum nl80211_reg_rule_flags {
        NL80211_RRF_NO_160MHZ           = 1<<16,
        NL80211_RRF_NO_HE               = 1<<17,
        NL80211_RRF_NO_320MHZ           = 1<<18,
+       NL80211_RRF_NO_EHT              = 1<<19,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN       NL80211_RRF_NO_IR