ARM: dts: rmobile: Extract SDHI extras on H3 and M3W ULCB

The SDHI nodes are missing features supported in upstream U-Boot,
like mode support properties. Pull the extras into U-Boot specific
DT until it hits mainline Linux, to make syncing of DTs easier.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master

diff --git a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
index 5cb5e9c6fb1870685b421f7cd27a559d9c67faa1..ebbd234d78ee8a4afd7748394ab91cc06c5c00d6 100644 (file)
--- a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
+++ b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
@@ -18,3 +18,24 @@
                gpio-sstbz = <&gpio2 3 0>;
        };
 };
+
+&sdhi2_pins {
+       groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+       power-source = <1800>;
+};
+
+&sdhi2_pins_uhs {
+       groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+};
+
+&sdhi0 {
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr104;
+       max-frequency = <208000000>;
+};
+
+&sdhi2 {
+       mmc-hs400-1_8v;
+       max-frequency = <200000000>;
+};

diff --git a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
index 78bd4f26bdee4ca2b19ad1e41307f597a4ac658e..4e960081f9ca880206d8149932e24e2445866243 100644 (file)
--- a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
+++ b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
@@ -18,3 +18,24 @@
                gpio-sstbz = <&gpio2 3 0>;
        };
 };
+
+&sdhi2_pins {
+       groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+       power-source = <1800>;
+};
+
+&sdhi2_pins_uhs {
+       groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+};
+
+&sdhi0 {
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr104;
+       max-frequency = <208000000>;
+};
+
+&sdhi2 {
+       mmc-hs400-1_8v;
+       max-frequency = <200000000>;
+};

diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index c805265343a486a83c8f125f9902a15eb15768d4..6f814845f8b665f3b13f10921e6bab288c512082 100644 (file)
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -299,13 +299,13 @@
        };
 
        sdhi2_pins: sd2 {
-               groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+               groups = "sdhi2_data8", "sdhi2_ctrl";
                function = "sdhi2";
-               power-source = <1800>;
+               power-source = <3300>;
        };
 
        sdhi2_pins_uhs: sd2_uhs {
-               groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+               groups = "sdhi2_data8", "sdhi2_ctrl";
                function = "sdhi2";
                power-source = <1800>;
        };
@@ -387,12 +387,8 @@
        vqmmc-supply = <&vccq_sdhi0>;
        cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
-       sd-uhs-sdr12;
-       sd-uhs-sdr25;
        sd-uhs-sdr50;
-       sd-uhs-sdr104;
        status = "okay";
-       max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -405,10 +401,8 @@
        vqmmc-supply = <&reg_1p8v>;
        bus-width = <8>;
        mmc-hs200-1_8v;
-       mmc-hs400-1_8v;
        non-removable;
        status = "okay";
-       max-frequency = <200000000>;
 };
 
 &ssi1 {