net: pse-pd: tps23881: Fix power on/off issue

An issue was present in the initial driver implementation. The driver
read the power status of all channels before toggling the bit of the
desired one. Using the power status register as a base value introduced
a problem, because only the bit corresponding to the concerned channel ID
should be set in the write-only power enable register. This led to cases
where disabling power for one channel also powered off other channels.

This patch removes the power status read and ensures the value is
limited to the bit matching the channel index of the PI.

Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241220170400.291705-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/pse-pd/tps23881.c b/drivers/net/pse-pd/tps23881.c
index 5c4e88be46ee3316330e26a68d06540ff1db86ff..8797ca1a8a219cf2c9681affcdcf8066438188ca 100644 (file)
--- a/drivers/net/pse-pd/tps23881.c
+++ b/drivers/net/pse-pd/tps23881.c
@@ -64,15 +64,11 @@ static int tps23881_pi_enable(struct pse_controller_dev *pcdev, int id)
        if (id >= TPS23881_MAX_CHANS)
                return -ERANGE;
 
-       ret = i2c_smbus_read_word_data(client, TPS23881_REG_PW_STATUS);
-       if (ret < 0)
-               return ret;
-
        chan = priv->port[id].chan[0];
        if (chan < 4)
-               val = (u16)(ret | BIT(chan));
+               val = BIT(chan);
        else
-               val = (u16)(ret | BIT(chan + 4));
+               val = BIT(chan + 4);
 
        if (priv->port[id].is_4p) {
                chan = priv->port[id].chan[1];
@@ -100,15 +96,11 @@ static int tps23881_pi_disable(struct pse_controller_dev *pcdev, int id)
        if (id >= TPS23881_MAX_CHANS)
                return -ERANGE;
 
-       ret = i2c_smbus_read_word_data(client, TPS23881_REG_PW_STATUS);
-       if (ret < 0)
-               return ret;
-
        chan = priv->port[id].chan[0];
        if (chan < 4)
-               val = (u16)(ret | BIT(chan + 4));
+               val = BIT(chan + 4);
        else
-               val = (u16)(ret | BIT(chan + 8));
+               val = BIT(chan + 8);
 
        if (priv->port[id].is_4p) {
                chan = priv->port[id].chan[1];