+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Ctera C200-V2
- *
- * Copyright (C) 2021 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Ctera C200 V2";
- compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_red;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1024 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
- };
-
- thermal-zones {
- ethphy-thermal {
- polling-delay = <20000>;
- polling-delay-passive = <2000>;
-
- thermal-sensors = <ðphy0>;
-
- trips {
- ethphy_alert1: trip1 {
- temperature = <65000>;
- hysteresis = <4000>;
- type = "passive";
- };
-
- ethphy_crit: trip2 {
- temperature = <100000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
-
- usb1 {
- label = "USB1 Button";
- linux,code = <BTN_0>;
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- };
-
- usb2 {
- label = "USB2 Button";
- linux,code = <BTN_1>;
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_poweroff>;
- pinctrl-names = "default";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
- pinctrl-names = "default";
-
- led-0 {
- function = LED_FUNCTION_USB;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- led-1 {
- function = LED_FUNCTION_USB;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb1_port 1>, <&usb2_port 1>;
- };
-
- led-2 {
- function = LED_FUNCTION_USB;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- led-3 {
- function = LED_FUNCTION_USB;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb1_port 2>, <&usb2_port 2>;
- };
-
- led-4 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata2";
- };
-
- led-5 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
- };
-
- led-6 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <2>;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- };
-
- led-7 {
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
- };
-
- led-8 {
- function = LED_FUNCTION_DISK_ERR;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- };
-
- led-9 {
- function = LED_FUNCTION_DISK_ERR;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
- };
-
- led_status_red: led-10 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
- };
-
- led-11 {
- function = LED_FUNCTION_DISK;
- function-enumerator = <1>;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata1";
- };
-
- led_status_green: led-12 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&coherencyfab {
- broken-idle;
-};
-
-ð1 {
- pinctrl-0 = <&ge1_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- clock-frequency = <100000>;
- status = "okay";
-
- hwmon@2a {
- compatible = "nuvoton,nct7802";
- reg = <0x2a>;
- };
-
- rtc@30 {
- compatible = "sii,s35390a";
- reg = <0x30>;
- };
-};
-
-&mdio {
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&nand_controller {
- status = "okay";
-
- nand@0 {
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x200000>;
- read-only;
- };
-
- partition@200000 {
- label = "certificate";
- reg = <0x0200000 0x100000>;
- read-only;
- };
-
- partition@300000 {
- label = "preset_cfg";
- reg = <0x0300000 0x100000>;
- read-only;
- };
-
- partition@400000 {
- label = "dev_params";
- reg = <0x0400000 0x100000>;
- read-only;
- };
- partition@500000 {
- label = "active_bank";
- reg = <0x0500000 0x0100000>;
- };
-
- partition@600000 {
- label = "magic";
- reg = <0x0600000 0x0100000>;
- read-only;
- };
-
- partition@700000 {
- label = "bank1";
- reg = <0x0700000 0x2800000>;
- };
-
- partition@2f00000 {
- label = "bank2";
- reg = <0x2f00000 0x2800000>;
- };
-
- /* 0x5700000-0x5a00000 undefined in vendor firmware */
-
- partition@5a00000 {
- label = "reserved";
- reg = <0x5a00000 0x2000000>;
- };
-
- partition@7a00000 {
- label = "ubi";
- reg = <0x7a00000 0x8600000>;
- };
- };
- };
-};
-
-&pciec {
- status = "okay";
-
- pcie@1,0 {
- pinctrl-0 = <&pmx_pcie>;
- pinctrl-names = "default";
- status = "okay";
- reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-
- /* -[0000:00]---01.0-[01]----00.0 */
- /* usbport trigger won't work */
- bridge@0,1 {
- compatible = "pci11ab,6710";
- reg = <0x3800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- usb@1,0 {
- /* Renesas uPD720202 */
- compatible = "pci1912,0015";
- reg = <0x1000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- usb1_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <1>;
- };
-
- usb2_port: port@2 {
- reg = <2>;
- #trigger-source-cells = <1>;
- };
- };
- };
- };
-};
-
-&pinctrl {
- pmx_poweroff: pmx-poweroff {
- marvell,pins = "mpp7";
- marvell,function = "gpo";
- };
-
- pmx_power_cpu: pmx-power-cpu {
- marvell,pins = "mpp4";
- marvell,function = "vdd";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
- marvell,function = "gpio";
- };
-
- pmx_leds1: pmx-leds1 {
- marvell,pins = "mpp47";
- marvell,function = "gpo";
- };
-
- pmx_leds2: pmx-leds2 {
- marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
- "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
- marvell,function = "gpio";
- };
-
- pmx_pcie: pmx-pcie {
- marvell,pins = "mpp59";
- marvell,function = "gpio";
- };
-
- /* this gpio is connected to the pin of buzzer
- * leave it as is due lack of proper driver
- */
- pmx_buzzer: pmx-buzzer {
- marvell,pins = "mpp63";
- marvell,function = "gpio";
- };
-};
-
-&pmsu {
- pinctrl-0 = <&pmx_power_cpu>;
- pinctrl-names = "default";
-};
-
-&rtc {
- status = "disabled";
-};
-
-&sata {
- nr-ports = <2>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdd0_temp: sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-
- hdd1_temp: sata-port@1 {
- reg = <1>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
--- /dev/null
+From a926f75a98612349885528aef26beb6265eaa027 Mon Sep 17 00:00:00 2001
+From: Stefan Kalscheuer <stefan@stklcode.de>
+Date: Fri, 15 Aug 2025 15:11:23 +0200
+Subject: [PATCH] arm: dts: marvell: add LED aliases and USB ports to Ctera
+ C200-V2
+
+* add PCIe bridge nodes for USB ports
+* add aliases and triggers for some LEDs
+* update partition label from "rootfs" to "ubi"
+
+Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
+---
+ .../boot/dts/marvell/armada-370-c200-v2.dts | 46 +++++++++++++++++--
+ 1 file changed, 43 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
++++ b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
+@@ -17,6 +17,13 @@
+ model = "Ctera C200 V2";
+ compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
++ aliases {
++ led-boot = &led_status_green;
++ led-failsafe = &led_status_red;
++ led-running = &led_status_green;
++ led-upgrade = &led_status_red;
++ };
++
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+@@ -117,6 +124,8 @@
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&usb1_port 1>, <&usb2_port 1>;
+ };
+
+ led-2 {
+@@ -131,6 +140,8 @@
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&usb1_port 2>, <&usb2_port 2>;
+ };
+
+ led-4 {
+@@ -138,6 +149,7 @@
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "ata2";
+ };
+
+ led-5 {
+@@ -172,7 +184,7 @@
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ };
+
+- led-10 {
++ led_status_red: led-10 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+@@ -183,9 +195,10 @@
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "ata1";
+ };
+
+- led-12 {
++ led_status_green: led-12 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+@@ -301,7 +314,7 @@
+ };
+
+ partition@7a00000 {
+- label = "rootfs";
++ label = "ubi";
+ reg = <0x7a00000 0x8600000>;
+ };
+ };
+@@ -316,6 +329,33 @@
+ pinctrl-names = "default";
+ status = "okay";
+ reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
++
++ /* -[0000:00]---01.0-[01]----00.0 */
++ /* usbport trigger won't work */
++ bridge@0,1 {
++ compatible = "pci11ab,6710";
++ reg = <0x3800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ usb@1,0 {
++ /* Renesas uPD720202 */
++ compatible = "pci1912,0015";
++ reg = <0x1000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ usb1_port: port@1 {
++ reg = <1>;
++ #trigger-source-cells = <1>;
++ };
++
++ usb2_port: port@2 {
++ reg = <2>;
++ #trigger-source-cells = <1>;
++ };
++ };
++ };
+ };
+ };
+
projects / thirdparty / openwrt.git / commitdiff
