i2c: designware: Use sda_hold_time variable name everywhere

Currently the PCI glue driver uses sda_hold variable name, while
the rest of the driver use sda_hold_time. This makes things harder
to grep. Use sda_hold_time variable name everywhere.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 433cb285d3b20944c0c4b7b1e14d2a046a4c0a86..38265c3dc4543fc82e9c593591e7558eb38680f0 100644 (file)
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -51,7 +51,7 @@ struct dw_scl_sda_cfg {
        u16 fs_hcnt;
        u16 ss_lcnt;
        u16 fs_lcnt;
-       u32 sda_hold;
+       u32 sda_hold_time;
 };
 
 struct dw_pci_controller {
@@ -76,7 +76,7 @@ static struct dw_scl_sda_cfg byt_config = {
        .fs_hcnt = 0x55,
        .ss_lcnt = 0x200,
        .fs_lcnt = 0x99,
-       .sda_hold = 0x6,
+       .sda_hold_time = 0x6,
 };
 
 /* Haswell HCNT/LCNT/SDA hold time */
@@ -85,14 +85,14 @@ static struct dw_scl_sda_cfg hsw_config = {
        .fs_hcnt = 0x48,
        .ss_lcnt = 0x01fb,
        .fs_lcnt = 0xa0,
-       .sda_hold = 0x9,
+       .sda_hold_time = 0x9,
 };
 
 /* NAVI-AMD HCNT/LCNT/SDA hold time */
 static struct dw_scl_sda_cfg navi_amd_config = {
        .ss_hcnt = 0x1ae,
        .ss_lcnt = 0x23a,
-       .sda_hold = 0x9,
+       .sda_hold_time = 0x9,
 };
 
 static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
@@ -264,7 +264,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
                dev->fs_hcnt = cfg->fs_hcnt;
                dev->ss_lcnt = cfg->ss_lcnt;
                dev->fs_lcnt = cfg->fs_lcnt;
-               dev->sda_hold_time = cfg->sda_hold;
+               dev->sda_hold_time = cfg->sda_hold_time;
        }
 
        adap = &dev->adapter;