#endif
#define DMW_PABITS 48
-#define TO_PHYS_MASK ((1ULL << DMW_PABITS) - 1)
+#define TO_PHYS_MASK ((_ULL(1) << _ULL(DMW_PABITS)) - 1)
/*
* Memory above this physical address will be considered highmem.
#define dmi_early_unmap(x, l) dmi_unmap(x)
#define dmi_alloc(l) memblock_alloc(l, PAGE_SIZE)
-static inline void *dmi_remap(u64 phys_addr, unsigned long size)
+static inline void *dmi_remap(phys_addr_t phys_addr, unsigned long size)
{
return ((void *)TO_CACHE(phys_addr));
}
#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
void arch_trigger_cpumask_backtrace(const struct cpumask *mask, int exclude_cpu);
+#ifdef CONFIG_32BIT
+#define MAX_IO_PICS 1
+#else
#define MAX_IO_PICS 8
+#endif
+
#define NR_IRQS (64 + NR_VECTORS * (NR_CPUS + MAX_IO_PICS))
struct acpi_vector_group {
.macro __EFI_PE_HEADER
.long IMAGE_NT_SIGNATURE
.Lcoff_header:
+#ifdef CONFIG_32BIT
+ .short IMAGE_FILE_MACHINE_LOONGARCH32 /* Machine */
+#else
.short IMAGE_FILE_MACHINE_LOONGARCH64 /* Machine */
+#endif
.short .Lsection_count /* NumberOfSections */
.long 0 /* TimeDateStamp */
.long 0 /* PointerToSymbolTable */
efi_systab_report_header(&efi_systab->hdr, efi_systab->fw_vendor);
- set_bit(EFI_64BIT, &efi.flags);
+ if (IS_ENABLED(CONFIG_64BIT))
+ set_bit(EFI_64BIT, &efi.flags);
+
efi_nr_tables = efi_systab->nr_tables;
efi_config_table = (unsigned long)efi_systab->tables;
clk = of_clk_get(np, 0);
of_node_put(np);
+ cpu_clock_freq = 200 * 1000 * 1000;
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ pr_warn("No valid CPU clock freq, assume 200MHz.\n");
return -ENODEV;
+ }
cpu_clock_freq = clk_get_rate(clk);
clk_put(clk);
SYM_CODE_START(kernel_entry) # kernel entry point
- /* Config direct window and set PG */
- SETUP_DMWINS t0
+ SETUP_TWINS
+ SETUP_MODES t0
JUMP_VIRT_ADDR t0, t1
-
- /* Enable PG */
- li.w t0, 0xb0 # PLV=0, IE=0, PG=1
- csrwr t0, LOONGARCH_CSR_CRMD
- li.w t0, 0x04 # PLV=0, PIE=1, PWE=0
- csrwr t0, LOONGARCH_CSR_PRMD
- li.w t0, 0x00 # FPE=0, SXE=0, ASXE=0, BTE=0
- csrwr t0, LOONGARCH_CSR_EUEN
+ SETUP_DMWINS t0
la.pcrel t0, __bss_start # clear .bss
- st.d zero, t0, 0
+ LONG_S zero, t0, 0
la.pcrel t1, __bss_stop - LONGSIZE
1:
- addi.d t0, t0, LONGSIZE
- st.d zero, t0, 0
+ PTR_ADDI t0, t0, LONGSIZE
+ LONG_S zero, t0, 0
bne t0, t1, 1b
la.pcrel t0, fw_arg0
- st.d a0, t0, 0 # firmware arguments
+ PTR_S a0, t0, 0 # firmware arguments
la.pcrel t0, fw_arg1
- st.d a1, t0, 0
+ PTR_S a1, t0, 0
la.pcrel t0, fw_arg2
- st.d a2, t0, 0
+ PTR_S a2, t0, 0
#ifdef CONFIG_PAGE_SIZE_4KB
- li.d t0, 0
- li.d t1, CSR_STFILL
+ LONG_LI t0, 0
+ LONG_LI t1, CSR_STFILL
csrxchg t0, t1, LOONGARCH_CSR_IMPCTL1
#endif
/* KSave3 used for percpu base, initialized as 0 */
/* Jump to the new kernel: new_pc = current_pc + random_offset */
pcaddi t0, 0
- add.d t0, t0, a0
+ PTR_ADD t0, t0, a0
jirl zero, t0, 0xc
#endif /* CONFIG_RANDOMIZE_BASE */
*/
SYM_CODE_START(smpboot_entry)
- SETUP_DMWINS t0
+ SETUP_TWINS
+ SETUP_MODES t0
JUMP_VIRT_ADDR t0, t1
+ SETUP_DMWINS t0
#ifdef CONFIG_PAGE_SIZE_4KB
- li.d t0, 0
- li.d t1, CSR_STFILL
+ LONG_LI t0, 0
+ LONG_LI t1, CSR_STFILL
csrxchg t0, t1, LOONGARCH_CSR_IMPCTL1
#endif
/* Enable PG */
for (p = begin; (void *)p < end; p++) {
long v = p->symvalue;
- uint32_t lu12iw, ori, lu32id, lu52id;
+ uint32_t lu12iw, ori;
+#ifdef CONFIG_64BIT
+ uint32_t lu32id, lu52id;
+#endif
union loongarch_instruction *insn = (void *)p->pc;
lu12iw = (v >> 12) & 0xfffff;
ori = v & 0xfff;
+#ifdef CONFIG_64BIT
lu32id = (v >> 32) & 0xfffff;
lu52id = v >> 52;
+#endif
insn[0].reg1i20_format.immediate = lu12iw;
insn[1].reg2i12_format.immediate = ori;
+#ifdef CONFIG_64BIT
insn[2].reg1i20_format.immediate = lu32id;
insn[3].reg2i12_format.immediate = lu52id;
+#endif
}
}