*/
pstate = hashtable->parallel_state;
build_barrier = &pstate->build_barrier;
- Assert(BarrierPhase(build_barrier) >= PHJ_BUILD_ALLOCATE);
+ Assert(BarrierPhase(build_barrier) >= PHJ_BUILD_ALLOCATING);
switch (BarrierPhase(build_barrier))
{
- case PHJ_BUILD_ALLOCATE:
+ case PHJ_BUILD_ALLOCATING:
/*
* Either I just allocated the initial hash table in
BarrierArriveAndWait(build_barrier, WAIT_EVENT_HASH_BUILD_ALLOCATE);
/* Fall through. */
- case PHJ_BUILD_HASH_INNER:
+ case PHJ_BUILD_HASHING_INNER:
/*
* It's time to begin hashing, or if we just arrived here then
* below.
*/
if (PHJ_GROW_BATCHES_PHASE(BarrierAttach(&pstate->grow_batches_barrier)) !=
- PHJ_GROW_BATCHES_ELECT)
+ PHJ_GROW_BATCHES_ELECTING)
ExecParallelHashIncreaseNumBatches(hashtable);
if (PHJ_GROW_BUCKETS_PHASE(BarrierAttach(&pstate->grow_buckets_barrier)) !=
- PHJ_GROW_BUCKETS_ELECT)
+ PHJ_GROW_BUCKETS_ELECTING)
ExecParallelHashIncreaseNumBuckets(hashtable);
ExecParallelHashEnsureBatchAccessors(hashtable);
ExecParallelHashTableSetCurrentBatch(hashtable, 0);
hashtable->nbuckets = pstate->nbuckets;
hashtable->log2_nbuckets = my_log2(hashtable->nbuckets);
hashtable->totalTuples = pstate->total_tuples;
-
- /*
- * Unless we're completely done and the batch state has been freed, make
- * sure we have accessors.
- */
- if (BarrierPhase(build_barrier) < PHJ_BUILD_FREE)
- ExecParallelHashEnsureBatchAccessors(hashtable);
+ ExecParallelHashEnsureBatchAccessors(hashtable);
/*
* The next synchronization point is in ExecHashJoin's HJ_BUILD_HASHTABLE
- * case, which will bring the build phase to PHJ_BUILD_RUN (if it isn't
+ * case, which will bring the build phase to PHJ_BUILD_DONE (if it isn't
* there already).
*/
- Assert(BarrierPhase(build_barrier) == PHJ_BUILD_HASH_OUTER ||
- BarrierPhase(build_barrier) == PHJ_BUILD_RUN ||
- BarrierPhase(build_barrier) == PHJ_BUILD_FREE);
+ Assert(BarrierPhase(build_barrier) == PHJ_BUILD_HASHING_OUTER ||
+ BarrierPhase(build_barrier) == PHJ_BUILD_DONE);
}
/* ----------------------------------------------------------------
* Attach to the build barrier. The corresponding detach operation is
* in ExecHashTableDetach. Note that we won't attach to the
* batch_barrier for batch 0 yet. We'll attach later and start it out
- * in PHJ_BATCH_PROBE phase, because batch 0 is allocated up front and
- * then loaded while hashing (the standard hybrid hash join
+ * in PHJ_BATCH_PROBING phase, because batch 0 is allocated up front
+ * and then loaded while hashing (the standard hybrid hash join
* algorithm), and we'll coordinate that using build_barrier.
*/
build_barrier = &pstate->build_barrier;
* SharedHashJoinBatch objects and the hash table for batch 0. One
* backend will be elected to do that now if necessary.
*/
- if (BarrierPhase(build_barrier) == PHJ_BUILD_ELECT &&
+ if (BarrierPhase(build_barrier) == PHJ_BUILD_ELECTING &&
BarrierArriveAndWait(build_barrier, WAIT_EVENT_HASH_BUILD_ELECT))
{
pstate->nbatch = nbatch;
/*
* The next Parallel Hash synchronization point is in
* MultiExecParallelHash(), which will progress it all the way to
- * PHJ_BUILD_RUN. The caller must not return control from this
+ * PHJ_BUILD_DONE. The caller must not return control from this
* executor node between now and then.
*/
}
ParallelHashJoinState *pstate = hashtable->parallel_state;
int i;
- Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASH_INNER);
+ Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASHING_INNER);
/*
* It's unlikely, but we need to be prepared for new participants to show
*/
switch (PHJ_GROW_BATCHES_PHASE(BarrierPhase(&pstate->grow_batches_barrier)))
{
- case PHJ_GROW_BATCHES_ELECT:
+ case PHJ_GROW_BATCHES_ELECTING:
/*
* Elect one participant to prepare to grow the number of batches.
}
/* Fall through. */
- case PHJ_GROW_BATCHES_REALLOCATE:
+ case PHJ_GROW_BATCHES_ALLOCATING:
/* Wait for the above to be finished. */
BarrierArriveAndWait(&pstate->grow_batches_barrier,
- WAIT_EVENT_HASH_GROW_BATCHES_REALLOCATE);
+ WAIT_EVENT_HASH_GROW_BATCHES_ALLOCATE);
/* Fall through. */
- case PHJ_GROW_BATCHES_REPARTITION:
+ case PHJ_GROW_BATCHES_REPARTITIONING:
/* Make sure that we have the current dimensions and buckets. */
ExecParallelHashEnsureBatchAccessors(hashtable);
ExecParallelHashTableSetCurrentBatch(hashtable, 0);
WAIT_EVENT_HASH_GROW_BATCHES_REPARTITION);
/* Fall through. */
- case PHJ_GROW_BATCHES_DECIDE:
+ case PHJ_GROW_BATCHES_DECIDING:
/*
* Elect one participant to clean up and decide whether further
}
/* Fall through. */
- case PHJ_GROW_BATCHES_FINISH:
+ case PHJ_GROW_BATCHES_FINISHING:
/* Wait for the above to complete. */
BarrierArriveAndWait(&pstate->grow_batches_barrier,
WAIT_EVENT_HASH_GROW_BATCHES_FINISH);
HashMemoryChunk chunk;
dsa_pointer chunk_s;
- Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASH_INNER);
+ Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASHING_INNER);
/*
* It's unlikely, but we need to be prepared for new participants to show
*/
switch (PHJ_GROW_BUCKETS_PHASE(BarrierPhase(&pstate->grow_buckets_barrier)))
{
- case PHJ_GROW_BUCKETS_ELECT:
+ case PHJ_GROW_BUCKETS_ELECTING:
/* Elect one participant to prepare to increase nbuckets. */
if (BarrierArriveAndWait(&pstate->grow_buckets_barrier,
WAIT_EVENT_HASH_GROW_BUCKETS_ELECT))
}
/* Fall through. */
- case PHJ_GROW_BUCKETS_REALLOCATE:
+ case PHJ_GROW_BUCKETS_ALLOCATING:
/* Wait for the above to complete. */
BarrierArriveAndWait(&pstate->grow_buckets_barrier,
- WAIT_EVENT_HASH_GROW_BUCKETS_REALLOCATE);
+ WAIT_EVENT_HASH_GROW_BUCKETS_ALLOCATE);
/* Fall through. */
- case PHJ_GROW_BUCKETS_REINSERT:
+ case PHJ_GROW_BUCKETS_REINSERTING:
/* Reinsert all tuples into the hash table. */
ExecParallelHashEnsureBatchAccessors(hashtable);
ExecParallelHashTableSetCurrentBatch(hashtable, 0);
/* Try to load it into memory. */
Assert(BarrierPhase(&hashtable->parallel_state->build_barrier) ==
- PHJ_BUILD_HASH_INNER);
+ PHJ_BUILD_HASHING_INNER);
hashTuple = ExecParallelHashTupleAlloc(hashtable,
HJTUPLE_OVERHEAD + tuple->t_len,
&shared);
if (pstate->growth != PHJ_GROWTH_DISABLED)
{
Assert(curbatch == 0);
- Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASH_INNER);
+ Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_HASHING_INNER);
/*
* Check if our space limit would be exceeded. To avoid choking on
{
/* Batch 0 doesn't need to be loaded. */
BarrierAttach(&shared->batch_barrier);
- while (BarrierPhase(&shared->batch_barrier) < PHJ_BATCH_PROBE)
+ while (BarrierPhase(&shared->batch_barrier) < PHJ_BATCH_PROBING)
BarrierArriveAndWait(&shared->batch_barrier, 0);
BarrierDetach(&shared->batch_barrier);
}
}
/*
- * We should never see a state where the batch-tracking array is freed,
- * because we should have given up sooner if we join when the build
- * barrier has reached the PHJ_BUILD_FREE phase.
+ * It's possible for a backend to start up very late so that the whole
+ * join is finished and the shm state for tracking batches has already
+ * been freed by ExecHashTableDetach(). In that case we'll just leave
+ * hashtable->batches as NULL so that ExecParallelHashJoinNewBatch() gives
+ * up early.
*/
- Assert(DsaPointerIsValid(pstate->batches));
+ if (!DsaPointerIsValid(pstate->batches))
+ return;
/* Use hash join memory context. */
oldcxt = MemoryContextSwitchTo(hashtable->hashCxt);
* longer attached, but since there is no way it's moving after
* this point it seems safe to make the following assertion.
*/
- Assert(BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_FREE);
+ Assert(BarrierPhase(&batch->batch_barrier) == PHJ_BATCH_DONE);
/* Free shared chunks and buckets. */
while (DsaPointerIsValid(batch->chunks))
void
ExecHashTableDetach(HashJoinTable hashtable)
{
- ParallelHashJoinState *pstate = hashtable->parallel_state;
-
- /*
- * If we're involved in a parallel query, we must either have got all the
- * way to PHJ_BUILD_RUN, or joined too late and be in PHJ_BUILD_FREE.
- */
- Assert(!pstate ||
- BarrierPhase(&pstate->build_barrier) >= PHJ_BUILD_RUN);
-
- if (pstate && BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_RUN)
+ if (hashtable->parallel_state)
{
+ ParallelHashJoinState *pstate = hashtable->parallel_state;
int i;
/* Make sure any temporary files are closed. */
}
/* If we're last to detach, clean up shared memory. */
- if (BarrierArriveAndDetach(&pstate->build_barrier))
+ if (BarrierDetach(&pstate->build_barrier))
{
- /*
- * Late joining processes will see this state and give up
- * immediately.
- */
- Assert(BarrierPhase(&pstate->build_barrier) == PHJ_BUILD_FREE);
-
if (DsaPointerIsValid(pstate->batches))
{
dsa_free(hashtable->area, pstate->batches);
pstate->batches = InvalidDsaPointer;
}
}
+
+ hashtable->parallel_state = NULL;
}
- hashtable->parallel_state = NULL;
}
/*
*
* One barrier called build_barrier is used to coordinate the hashing phases.
* The phase is represented by an integer which begins at zero and increments
- * one by one, but in the code it is referred to by symbolic names as follows.
- * An asterisk indicates a phase that is performed by a single arbitrarily
- * chosen process.
+ * one by one, but in the code it is referred to by symbolic names as follows:
*
- * PHJ_BUILD_ELECT -- initial state
- * PHJ_BUILD_ALLOCATE* -- one sets up the batches and table 0
- * PHJ_BUILD_HASH_INNER -- all hash the inner rel
- * PHJ_BUILD_HASH_OUTER -- (multi-batch only) all hash the outer
- * PHJ_BUILD_RUN -- building done, probing can begin
- * PHJ_BUILD_FREE* -- all work complete, one frees batches
+ * PHJ_BUILD_ELECTING -- initial state
+ * PHJ_BUILD_ALLOCATING -- one sets up the batches and table 0
+ * PHJ_BUILD_HASHING_INNER -- all hash the inner rel
+ * PHJ_BUILD_HASHING_OUTER -- (multi-batch only) all hash the outer
+ * PHJ_BUILD_DONE -- building done, probing can begin
*
- * While in the phase PHJ_BUILD_HASH_INNER a separate pair of barriers may
+ * While in the phase PHJ_BUILD_HASHING_INNER a separate pair of barriers may
* be used repeatedly as required to coordinate expansions in the number of
* batches or buckets. Their phases are as follows:
*
- * PHJ_GROW_BATCHES_ELECT -- initial state
- * PHJ_GROW_BATCHES_REALLOCATE* -- one allocates new batches
- * PHJ_GROW_BATCHES_REPARTITION -- all repartition
- * PHJ_GROW_BATCHES_DECIDE* -- one detects skew and cleans up
- * PHJ_GROW_BATCHES_FINISH -- finished one growth cycle
+ * PHJ_GROW_BATCHES_ELECTING -- initial state
+ * PHJ_GROW_BATCHES_ALLOCATING -- one allocates new batches
+ * PHJ_GROW_BATCHES_REPARTITIONING -- all repartition
+ * PHJ_GROW_BATCHES_FINISHING -- one cleans up, detects skew
*
- * PHJ_GROW_BUCKETS_ELECT -- initial state
- * PHJ_GROW_BUCKETS_REALLOCATE* -- one allocates new buckets
- * PHJ_GROW_BUCKETS_REINSERT -- all insert tuples
+ * PHJ_GROW_BUCKETS_ELECTING -- initial state
+ * PHJ_GROW_BUCKETS_ALLOCATING -- one allocates new buckets
+ * PHJ_GROW_BUCKETS_REINSERTING -- all insert tuples
*
* If the planner got the number of batches and buckets right, those won't be
* necessary, but on the other hand we might finish up needing to expand the
* within our memory budget and load factor target. For that reason it's a
* separate pair of barriers using circular phases.
*
- * The PHJ_BUILD_HASH_OUTER phase is required only for multi-batch joins,
+ * The PHJ_BUILD_HASHING_OUTER phase is required only for multi-batch joins,
* because we need to divide the outer relation into batches up front in order
* to be able to process batches entirely independently. In contrast, the
* parallel-oblivious algorithm simply throws tuples 'forward' to 'later'
* batches whenever it encounters them while scanning and probing, which it
* can do because it processes batches in serial order.
*
- * Once PHJ_BUILD_RUN is reached, backends then split up and process
+ * Once PHJ_BUILD_DONE is reached, backends then split up and process
* different batches, or gang up and work together on probing batches if there
* aren't enough to go around. For each batch there is a separate barrier
* with the following phases:
*
- * PHJ_BATCH_ELECT -- initial state
- * PHJ_BATCH_ALLOCATE* -- one allocates buckets
- * PHJ_BATCH_LOAD -- all load the hash table from disk
- * PHJ_BATCH_PROBE -- all probe
- * PHJ_BATCH_FREE* -- one frees memory
+ * PHJ_BATCH_ELECTING -- initial state
+ * PHJ_BATCH_ALLOCATING -- one allocates buckets
+ * PHJ_BATCH_LOADING -- all load the hash table from disk
+ * PHJ_BATCH_PROBING -- all probe
+ * PHJ_BATCH_DONE -- end
*
* Batch 0 is a special case, because it starts out in phase
- * PHJ_BATCH_PROBE; populating batch 0's hash table is done during
- * PHJ_BUILD_HASH_INNER so we can skip loading.
+ * PHJ_BATCH_PROBING; populating batch 0's hash table is done during
+ * PHJ_BUILD_HASHING_INNER so we can skip loading.
*
* Initially we try to plan for a single-batch hash join using the combined
* hash_mem of all participants to create a large shared hash table. If that
*
* To avoid deadlocks, we never wait for any barrier unless it is known that
* all other backends attached to it are actively executing the node or have
- * finished. Practically, that means that we never emit a tuple while attached
- * to a barrier, unless the barrier has reached a phase that means that no
- * process will wait on it again. We emit tuples while attached to the build
- * barrier in phase PHJ_BUILD_RUN, and to a per-batch barrier in phase
- * PHJ_BATCH_PROBE. These are advanced to PHJ_BUILD_FREE and PHJ_BATCH_FREE
- * respectively without waiting, using BarrierArriveAndDetach(). The last to
- * detach receives a different return value so that it knows that it's safe to
- * clean up. Any straggler process that attaches after that phase is reached
- * will see that it's too late to participate or access the relevant shared
- * memory objects.
+ * already arrived. Practically, that means that we never return a tuple
+ * while attached to a barrier, unless the barrier has reached its final
+ * state. In the slightly special case of the per-batch barrier, we return
+ * tuples while in PHJ_BATCH_PROBING phase, but that's OK because we use
+ * BarrierArriveAndDetach() to advance it to PHJ_BATCH_DONE without waiting.
*
*-------------------------------------------------------------------------
*/
Barrier *build_barrier;
build_barrier = ¶llel_state->build_barrier;
- Assert(BarrierPhase(build_barrier) == PHJ_BUILD_HASH_OUTER ||
- BarrierPhase(build_barrier) == PHJ_BUILD_RUN ||
- BarrierPhase(build_barrier) == PHJ_BUILD_FREE);
- if (BarrierPhase(build_barrier) == PHJ_BUILD_HASH_OUTER)
+ Assert(BarrierPhase(build_barrier) == PHJ_BUILD_HASHING_OUTER ||
+ BarrierPhase(build_barrier) == PHJ_BUILD_DONE);
+ if (BarrierPhase(build_barrier) == PHJ_BUILD_HASHING_OUTER)
{
/*
* If multi-batch, we need to hash the outer relation
BarrierArriveAndWait(build_barrier,
WAIT_EVENT_HASH_BUILD_HASH_OUTER);
}
- else if (BarrierPhase(build_barrier) == PHJ_BUILD_FREE)
- {
- /*
- * If we attached so late that the job is finished and
- * the batch state has been freed, we can return
- * immediately.
- */
- return NULL;
- }
+ Assert(BarrierPhase(build_barrier) == PHJ_BUILD_DONE);
/* Each backend should now select a batch to work on. */
- Assert(BarrierPhase(build_barrier) == PHJ_BUILD_RUN);
hashtable->curbatch = -1;
node->hj_JoinState = HJ_NEED_NEW_BATCH;
int start_batchno;
int batchno;
+ /*
+ * If we started up so late that the batch tracking array has been freed
+ * already by ExecHashTableDetach(), then we are finished. See also
+ * ExecParallelHashEnsureBatchAccessors().
+ */
+ if (hashtable->batches == NULL)
+ return false;
+
/*
* If we were already attached to a batch, remember not to bother checking
* it again, and detach from it (possibly freeing the hash table if we are
switch (BarrierAttach(batch_barrier))
{
- case PHJ_BATCH_ELECT:
+ case PHJ_BATCH_ELECTING:
/* One backend allocates the hash table. */
if (BarrierArriveAndWait(batch_barrier,
ExecParallelHashTableAlloc(hashtable, batchno);
/* Fall through. */
- case PHJ_BATCH_ALLOCATE:
+ case PHJ_BATCH_ALLOCATING:
/* Wait for allocation to complete. */
BarrierArriveAndWait(batch_barrier,
WAIT_EVENT_HASH_BATCH_ALLOCATE);
/* Fall through. */
- case PHJ_BATCH_LOAD:
+ case PHJ_BATCH_LOADING:
/* Start (or join in) loading tuples. */
ExecParallelHashTableSetCurrentBatch(hashtable, batchno);
inner_tuples = hashtable->batches[batchno].inner_tuples;
WAIT_EVENT_HASH_BATCH_LOAD);
/* Fall through. */
- case PHJ_BATCH_PROBE:
+ case PHJ_BATCH_PROBING:
/*
* This batch is ready to probe. Return control to
* this barrier again (or else a deadlock could occur).
* All attached participants must eventually call
* BarrierArriveAndDetach() so that the final phase
- * PHJ_BATCH_FREE can be reached.
+ * PHJ_BATCH_DONE can be reached.
*/
ExecParallelHashTableSetCurrentBatch(hashtable, batchno);
sts_begin_parallel_scan(hashtable->batches[batchno].outer_tuples);
return true;
- case PHJ_BATCH_FREE:
+ case PHJ_BATCH_DONE:
/*
* Already done. Detach and go around again (if any
/*
* It would be possible to reuse the shared hash table in single-batch
* cases by resetting and then fast-forwarding build_barrier to
- * PHJ_BUILD_FREE and batch 0's batch_barrier to PHJ_BATCH_PROBE, but
+ * PHJ_BUILD_DONE and batch 0's batch_barrier to PHJ_BATCH_PROBING, but
* currently shared hash tables are already freed by now (by the last
* participant to detach from the batch). We could consider keeping it
* around for single-batch joins. We'd also need to adjust
/* Clear any shared batch files. */
SharedFileSetDeleteAll(&pstate->fileset);
- /* Reset build_barrier to PHJ_BUILD_ELECT so we can go around again. */
+ /* Reset build_barrier to PHJ_BUILD_ELECTING so we can go around again. */
BarrierInit(&pstate->build_barrier, 0);
}
case WAIT_EVENT_HASH_BUILD_HASH_OUTER:
event_name = "HashBuildHashOuter";
break;
- case WAIT_EVENT_HASH_GROW_BATCHES_REALLOCATE:
- event_name = "HashGrowBatchesReallocate";
+ case WAIT_EVENT_HASH_GROW_BATCHES_ALLOCATE:
+ event_name = "HashGrowBatchesAllocate";
break;
case WAIT_EVENT_HASH_GROW_BATCHES_DECIDE:
event_name = "HashGrowBatchesDecide";
case WAIT_EVENT_HASH_GROW_BATCHES_REPARTITION:
event_name = "HashGrowBatchesRepartition";
break;
- case WAIT_EVENT_HASH_GROW_BUCKETS_REALLOCATE:
- event_name = "HashGrowBucketsReallocate";
+ case WAIT_EVENT_HASH_GROW_BUCKETS_ALLOCATE:
+ event_name = "HashGrowBucketsAllocate";
break;
case WAIT_EVENT_HASH_GROW_BUCKETS_ELECT:
event_name = "HashGrowBucketsElect";
} ParallelHashJoinState;
/* The phases for building batches, used by build_barrier. */
-#define PHJ_BUILD_ELECT 0
-#define PHJ_BUILD_ALLOCATE 1
-#define PHJ_BUILD_HASH_INNER 2
-#define PHJ_BUILD_HASH_OUTER 3
-#define PHJ_BUILD_RUN 4
-#define PHJ_BUILD_FREE 5
+#define PHJ_BUILD_ELECTING 0
+#define PHJ_BUILD_ALLOCATING 1
+#define PHJ_BUILD_HASHING_INNER 2
+#define PHJ_BUILD_HASHING_OUTER 3
+#define PHJ_BUILD_DONE 4
/* The phases for probing each batch, used by for batch_barrier. */
-#define PHJ_BATCH_ELECT 0
-#define PHJ_BATCH_ALLOCATE 1
-#define PHJ_BATCH_LOAD 2
-#define PHJ_BATCH_PROBE 3
-#define PHJ_BATCH_FREE 4
+#define PHJ_BATCH_ELECTING 0
+#define PHJ_BATCH_ALLOCATING 1
+#define PHJ_BATCH_LOADING 2
+#define PHJ_BATCH_PROBING 3
+#define PHJ_BATCH_DONE 4
/* The phases of batch growth while hashing, for grow_batches_barrier. */
-#define PHJ_GROW_BATCHES_ELECT 0
-#define PHJ_GROW_BATCHES_REALLOCATE 1
-#define PHJ_GROW_BATCHES_REPARTITION 2
-#define PHJ_GROW_BATCHES_DECIDE 3
-#define PHJ_GROW_BATCHES_FINISH 4
+#define PHJ_GROW_BATCHES_ELECTING 0
+#define PHJ_GROW_BATCHES_ALLOCATING 1
+#define PHJ_GROW_BATCHES_REPARTITIONING 2
+#define PHJ_GROW_BATCHES_DECIDING 3
+#define PHJ_GROW_BATCHES_FINISHING 4
#define PHJ_GROW_BATCHES_PHASE(n) ((n) % 5) /* circular phases */
/* The phases of bucket growth while hashing, for grow_buckets_barrier. */
-#define PHJ_GROW_BUCKETS_ELECT 0
-#define PHJ_GROW_BUCKETS_REALLOCATE 1
-#define PHJ_GROW_BUCKETS_REINSERT 2
+#define PHJ_GROW_BUCKETS_ELECTING 0
+#define PHJ_GROW_BUCKETS_ALLOCATING 1
+#define PHJ_GROW_BUCKETS_REINSERTING 2
#define PHJ_GROW_BUCKETS_PHASE(n) ((n) % 3) /* circular phases */
typedef struct HashJoinTableData
WAIT_EVENT_HASH_BUILD_ELECT,
WAIT_EVENT_HASH_BUILD_HASH_INNER,
WAIT_EVENT_HASH_BUILD_HASH_OUTER,
- WAIT_EVENT_HASH_GROW_BATCHES_REALLOCATE,
+ WAIT_EVENT_HASH_GROW_BATCHES_ALLOCATE,
WAIT_EVENT_HASH_GROW_BATCHES_DECIDE,
WAIT_EVENT_HASH_GROW_BATCHES_ELECT,
WAIT_EVENT_HASH_GROW_BATCHES_FINISH,
WAIT_EVENT_HASH_GROW_BATCHES_REPARTITION,
- WAIT_EVENT_HASH_GROW_BUCKETS_REALLOCATE,
+ WAIT_EVENT_HASH_GROW_BUCKETS_ALLOCATE,
WAIT_EVENT_HASH_GROW_BUCKETS_ELECT,
WAIT_EVENT_HASH_GROW_BUCKETS_REINSERT,
WAIT_EVENT_LOGICAL_SYNC_DATA,
projects / thirdparty / postgresql.git / commitdiff
