vax-tdep.o \
windows-tdep.o \
x86-tdep.o \
- xcoffread.o \
xstormy16-tdep.o \
xtensa-config.o \
xtensa-linux-tdep.o \
xtensa-tdep.o \
z80-tdep.o
+# Object files for reading specific types of debug information.
+coff_SRCS = coffread.c coff-pe-read.c
+dbx_SRCS = dbxread.c
+elf_SRCS = elfread.c stap-probe.c dtrace-probe.c
+macho_SRCS = machoread.c
+mips_SRCS = mipsread.c
+xcoff_SRCS = xcoffread.c
+FORMAT_SRCS = @FORMAT_SRCS@
+FORMAT_OBS = $(patsubst %.c,%.o,$(FORMAT_SRCS))
+
# The following native-target dependent variables are defined on
# configure.nat.
NAT_FILE = @NAT_FILE@
c-varobj.c \
charset.c \
cli-out.c \
- coff-pe-read.c \
- coffread.c \
complaints.c \
completer.c \
copying.c \
d-lang.c \
d-namespace.c \
d-valprint.c \
- dbxread.c \
dcache.c \
debug.c \
debuginfod-support.c \
memtag.c \
minidebug.c \
minsyms.c \
- mipsread.c \
namespace.c \
objc-lang.c \
objfiles.c \
d-exp.y \
dtrace-probe.c \
elf-none-tdep.c \
- elfread.c \
f-exp.y \
gcore-elf.c \
gdb.c \
x86-gnu-nat.c \
x86-nat.c \
x86-tdep.c \
- xcoffread.c \
xstormy16-tdep.c \
xtensa-config.c \
xtensa-linux-nat.c \
$(patsubst %.c,%.o,$(COMMON_SFILES)) \
$(SUBDIR_CLI_OBS) \
$(SUBDIR_MI_OBS) \
- $(SUBDIR_TARGET_OBS)
+ $(SUBDIR_TARGET_OBS) \
+ $(FORMAT_OBS)
SUBDIRS = doc @subdirs@ data-directory
CLEANDIRS = $(SUBDIRS)
* Support for stabs debugging format and the a.out/dbx object format is
deprecated, and will be removed in GDB 18.
+* Configure changes
+
+--enable-binary-file-formats=[FORMAT,...]
+--enable-binary-file-formats=all
+ A user can now decide to only compile support for certain file formats.
+ The available formats at this point are: dbx, coff, xcoff, elf, mach-o
+ and mips. Some targets require specific file formats to be available,
+ and in such cases, the configure script will warn the user and add
+ support anyway. By default, all formats will be compiled in, to
+ continue the behavior from before adding the switch.
+
* A new configure option was added, allowing support for the compile
subsystem to be disabled at configure time, in the form of
--disable-gdb-compile.
There is no convenient way to generate a list of all available
targets.
+`--enable-binary-file-formats=FORMAT,FORMAT,...'
+`--enable-binary-file-formats=all'
+ Configure GDB to only be be able to read selected file formats.
+ The special value "all" causes all file formats to be compiled
+ in, and is the the default behavior of the option. This option
+ is meant for advanced users who are sure of what they expect,
+ if you are unsure which options you will need on your debugging
+ sessions, we recommend that you not use this feature. The
+ accepted options are:
+ * coff: Main format on Windows systems, this is required to
+ compile with windows target support;
+ * dbx (also known as a.out): Legacy file format, this is
+ recommended if you know you will be dealing with this
+ file format;
+ * elf: Main format on Linux systems, this is heavily
+ recommended when compiling with linux support;
+ * macho: Main format on MacOS systems, this is heavily
+ recommended when compiling for those targets;
+ * mips (also known as ecoff): Main file format for targets
+ running on MIPS CPUs, this is heavily recommended when
+ supporting those targets;
+ * xcoff: Main format on AIX systems, this is required to
+ compile for AIX targets and rs6000 CPUs.
+
`--with-gdb-datadir=PATH'
Set the GDB-specific data directory. GDB will look here for
certain supporting files or scripts. This defaults to the `gdb'
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
+/* Which binary file formats were requested at configure time. */
+#undef SUPPORTED_BINARY_FILE_FORMATS
+
/* automatically load a system-wide gdbinit file */
#undef SYSTEM_GDBINIT
LTLIBLZMA
LIBLZMA
HAVE_LIBLZMA
+FORMAT_SRCS
SER_HARDWIRE
WERROR_CFLAGS
WARN_CFLAGS
with_auto_load_dir
with_auto_load_safe_path
enable_targets
+enable_binary_file_formats
enable_gdb_mdebug_support
enable_gdb_dwarf_support
with_amd_dbgapi
--disable-nls do not use Native Language Support
--enable-targets=TARGETS
alternative target configurations
+ --enable-binary-file-formats=FORMATS
+ enable support for selected file formats (default
+ 'all') available formats: coff, dbx, elf, macho,
+ mips, xcoff, all
--enable-gdb-mdebug-support
Enable support for the mdebug debuginfo format
(default 'yes')
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11510 "configure"
+#line 11516 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11616 "configure"
+#line 11622 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
fi
+# Check whether --enable-binary_file_formats was given.
+if test "${enable_binary_file_formats+set}" = set; then :
+ enableval=$enable_binary_file_formats; case "${enableval}" in
+ yes | "") as_fn_error $? "enable-binary-file-formats option must specify file formats or 'all'" "$LINENO" 5
+ ;;
+ no) enable_binary_file_formats= ;;
+ *) enable_binary_file_formats=$enableval ;;
+esac
+else
+ enable_binary_file_formats=all
+fi
+
# Check whether to support mdebug/ecoff debug information.
# Check whether --enable-gdb-mdebug-support was given.
all_targets=
HAVE_NATIVE_GCORE_TARGET=
+# File formats that will be enabled based on the selected
+# target(s). These are chosen because they are required to
+# compile one or more of the selected targets.
+target_formats=
+
+# If all targets were requested, this is all formats that should
+# accompany them. These are just the ones required for compilation
+# to succeed, not the formats suggested based on targets.
+all_target_formats="coff xcoff"
+
for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
do
if test "$targ_alias" = "all"; then
all_targets=true
+ target_formats=$all_target_formats
else
# Canonicalize the secondary target names.
result=`$ac_config_sub $targ_alias 2>/dev/null`
# Note that WIN32APILIBS is set by GDB_AC_COMMON.
WIN32LIBS="$WIN32LIBS $WIN32APILIBS"
+# Object files to be used when building with support for all file formats.
+# This should not have elf or macho, as support for those formats depends
+# on BFD enabling them as well.
+all_binary_file_srcs="\$(dbx_SRCS) \$(mips_SRCS) \$(coff_SRCS) \$(xcoff_SRCS)"
+
+bfd_supports_elf=no
# Add ELF support to GDB, but only if BFD includes ELF support.
OLD_CFLAGS=$CFLAGS
CC="./libtool --quiet --mode=link $CC"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ELF support in BFD" >&5
$as_echo_n "checking for ELF support in BFD... " >&6; }
-if ${gdb_cv_var_elf+:} false; then :
+if ${gdb_cv_var_bfd_elf+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- gdb_cv_var_elf=yes
+ gdb_cv_var_bfd_elf=yes
else
- gdb_cv_var_elf=no
+ gdb_cv_var_bfd_elf=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_elf" >&5
-$as_echo "$gdb_cv_var_elf" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_bfd_elf" >&5
+$as_echo "$gdb_cv_var_bfd_elf" >&6; }
CC=$OLD_CC
CFLAGS=$OLD_CFLAGS
LDFLAGS=$OLD_LDFLAGS
LIBS=$OLD_LIBS
-if test "$gdb_cv_var_elf" = yes; then
- CONFIG_OBS="$CONFIG_OBS elfread.o stap-probe.o dtrace-probe.o \
- gcore-elf.o elf-none-tdep.o"
+if test "$gdb_cv_var_bfd_elf" = yes; then
+ CONFIG_OBS="$CONFIG_OBS gcore-elf.o elf-none-tdep.o"
$as_echo "#define HAVE_ELF 1" >>confdefs.h
fi
fi
+ bfd_supports_elf=yes
+ all_binary_file_srcs="$all_binary_file_srcs \$(elf_SRCS)"
fi
# Add macho support to GDB, but only if BFD includes it.
+bfd_supports_macho=no
OLD_CFLAGS=$CFLAGS
OLD_LDFLAGS=$LDFLAGS
CC="./libtool --quiet --mode=link $CC"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Mach-O support in BFD" >&5
$as_echo_n "checking for Mach-O support in BFD... " >&6; }
-if ${gdb_cv_var_macho+:} false; then :
+if ${gdb_cv_var_bfd_macho+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- gdb_cv_var_macho=yes
+ gdb_cv_var_bfd_macho=yes
else
- gdb_cv_var_macho=no
+ gdb_cv_var_bfd_macho=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_macho" >&5
-$as_echo "$gdb_cv_var_macho" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_var_bfd_macho" >&5
+$as_echo "$gdb_cv_var_bfd_macho" >&6; }
CC=$OLD_CC
CFLAGS=$OLD_CFLAGS
LDFLAGS=$OLD_LDFLAGS
LIBS=$OLD_LIBS
-if test "$gdb_cv_var_macho" = yes; then
- CONFIG_OBS="$CONFIG_OBS machoread.o"
+if test "$gdb_cv_var_bfd_macho" = yes; then
+ bfd_supports_macho=yes
+ all_binary_file_srcs="$all_binary_file_srcs \$(macho_SRCS)"
fi
+FORMAT_SRCS=
+
+if test "$enable_binary_file_formats" != "all"; then
+ # Formats that are required by some requested target(s).
+ # Warn users that they are added, so no one is surprised.
+ for req in $target_formats; do
+ case ,$enable_binary_file_formats, in
+ *,$req,*)
+ # Do nothing.
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"$req is required to support one or more requested targets. Adding it\"" >&5
+$as_echo "$as_me: WARNING: \"$req is required to support one or more requested targets. Adding it\"" >&2;}
+ enable_binary_file_formats="${enable_binary_file_formats},$req"
+ ;;
+ esac
+ done
+
+
+cat >>confdefs.h <<_ACEOF
+#define SUPPORTED_BINARY_FILE_FORMATS "$enable_binary_file_formats"
+_ACEOF
+
+fi
+
+enable_binary_file_formats=$(echo $enable_binary_file_formats | sed 's/,/ /g')
+
+# Go through all requested and required binary file formats to compile
+# GDB, and double check that we can compile them.
+for format in $enable_binary_file_formats
+do
+ if test "$format" = "elf" && test "$bfd_supports_elf" != "yes"; then
+ as_fn_error but BFD does not support it." "\"elf support was requested" "$LINENO" 5;
+ elif test "$format" = "macho" && test "$bfd_supports_macho" != "yes"; then
+ as_fn_error but BFD does not support it." "\"Mach-O support was requested" "$LINENO" 5;
+ fi
+
+ if test "$format" = "all"; then
+ FORMAT_SRCS="$all_binary_file_srcs"
+ # We don't break here in case the user requested Mach-O or ELF, but
+ # BFD is not configured to support it. If we were to break, we would
+ # silently drop the requested support instead of erroring out.
+ else
+ fmt=$(echo "$format _SRCS" | sed 's/ //')
+ FORMAT_SRCS="$FORMAT_SRCS \$($fmt)"
+ fi
+done
+
+
+
# Add any host-specific objects to GDB.
CONFIG_OBS="${CONFIG_OBS} ${gdb_host_obs}"
# If building on ELF, look for lzma support for embedded compressed debug info.
-if test "$gdb_cv_var_elf" = yes; then
+if test "$gdb_cv_var_bfd_elf" = yes; then
# Check whether --with-lzma was given.
if test "${with_lzma+set}" = set; then :
;;
esac])
+AC_ARG_ENABLE(binary_file_formats,
+ AS_HELP_STRING([--enable-binary-file-formats=FORMATS],
+ [enable support for selected file formats (default 'all')
+ available formats: coff, dbx, elf, macho, mips, xcoff, all]),
+[case "${enableval}" in
+ yes | "") AC_MSG_ERROR(enable-binary-file-formats option must specify file formats or 'all')
+ ;;
+ no) enable_binary_file_formats= ;;
+ *) enable_binary_file_formats=$enableval ;;
+esac], [enable_binary_file_formats=all])
# Check whether to support mdebug/ecoff debug information.
AC_ARG_ENABLE(gdb-mdebug-support,
all_targets=
HAVE_NATIVE_GCORE_TARGET=
+# File formats that will be enabled based on the selected
+# target(s). These are chosen because they are required to
+# compile one or more of the selected targets.
+target_formats=
+
+# If all targets were requested, this is all formats that should
+# accompany them. These are just the ones required for compilation
+# to succeed, not the formats suggested based on targets.
+all_target_formats="coff xcoff"
+
for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
do
if test "$targ_alias" = "all"; then
all_targets=true
+ target_formats=$all_target_formats
else
# Canonicalize the secondary target names.
result=`$ac_config_sub $targ_alias 2>/dev/null`
# Note that WIN32APILIBS is set by GDB_AC_COMMON.
WIN32LIBS="$WIN32LIBS $WIN32APILIBS"
+# Object files to be used when building with support for all file formats.
+# This should not have elf or macho, as support for those formats depends
+# on BFD enabling them as well.
+all_binary_file_srcs="\$(dbx_SRCS) \$(mips_SRCS) \$(coff_SRCS) \$(xcoff_SRCS)"
+
+bfd_supports_elf=no
# Add ELF support to GDB, but only if BFD includes ELF support.
-GDB_AC_CHECK_BFD([for ELF support in BFD], gdb_cv_var_elf,
+GDB_AC_CHECK_BFD([for ELF support in BFD], gdb_cv_var_bfd_elf,
[bfd_get_elf_phdr_upper_bound (NULL)], elf-bfd.h)
-if test "$gdb_cv_var_elf" = yes; then
- CONFIG_OBS="$CONFIG_OBS elfread.o stap-probe.o dtrace-probe.o \
- gcore-elf.o elf-none-tdep.o"
+if test "$gdb_cv_var_bfd_elf" = yes; then
+ CONFIG_OBS="$CONFIG_OBS gcore-elf.o elf-none-tdep.o"
AC_DEFINE(HAVE_ELF, 1,
[Define if ELF support should be included.])
# -ldl is provided by bfd/Makefile.am (LIBDL) <PLUGINS>.
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS(dlopen, dl)
fi
+ bfd_supports_elf=yes
+ all_binary_file_srcs="$all_binary_file_srcs \$(elf_SRCS)"
fi
# Add macho support to GDB, but only if BFD includes it.
-GDB_AC_CHECK_BFD([for Mach-O support in BFD], gdb_cv_var_macho,
+bfd_supports_macho=no
+GDB_AC_CHECK_BFD([for Mach-O support in BFD], gdb_cv_var_bfd_macho,
[bfd_mach_o_lookup_command (NULL, 0, NULL)], mach-o.h)
-if test "$gdb_cv_var_macho" = yes; then
- CONFIG_OBS="$CONFIG_OBS machoread.o"
+if test "$gdb_cv_var_bfd_macho" = yes; then
+ bfd_supports_macho=yes
+ all_binary_file_srcs="$all_binary_file_srcs \$(macho_SRCS)"
+fi
+
+FORMAT_SRCS=
+
+if test "$enable_binary_file_formats" != "all"; then
+ # Formats that are required by some requested target(s).
+ # Warn users that they are added, so no one is surprised.
+ for req in $target_formats; do
+ case ,$enable_binary_file_formats, in
+ *,$req,*)
+ # Do nothing.
+ ;;
+ *)
+ AC_MSG_WARN("$req is required to support one or more requested targets. Adding it")
+ enable_binary_file_formats="${enable_binary_file_formats},$req"
+ ;;
+ esac
+ done
+
+ AC_DEFINE_UNQUOTED(SUPPORTED_BINARY_FILE_FORMATS, "$enable_binary_file_formats",
+ Which binary file formats were requested at configure time. )
fi
+enable_binary_file_formats=$(echo $enable_binary_file_formats | sed 's/,/ /g')
+
+# Go through all requested and required binary file formats to compile
+# GDB, and double check that we can compile them.
+for format in $enable_binary_file_formats
+do
+ if test "$format" = "elf" && test "$bfd_supports_elf" != "yes"; then
+ AC_MSG_ERROR("elf support was requested, but BFD does not support it.");
+ elif test "$format" = "macho" && test "$bfd_supports_macho" != "yes"; then
+ AC_MSG_ERROR("Mach-O support was requested, but BFD does not support it.");
+ fi
+
+ if test "$format" = "all"; then
+ FORMAT_SRCS="$all_binary_file_srcs"
+ # We don't break here in case the user requested Mach-O or ELF, but
+ # BFD is not configured to support it. If we were to break, we would
+ # silently drop the requested support instead of erroring out.
+ else
+ fmt=$(echo "$format _SRCS" | sed 's/ //')
+ FORMAT_SRCS="$FORMAT_SRCS \$($fmt)"
+ fi
+done
+
+AC_SUBST(FORMAT_SRCS)
+
# Add any host-specific objects to GDB.
CONFIG_OBS="${CONFIG_OBS} ${gdb_host_obs}"
# If building on ELF, look for lzma support for embedded compressed debug info.
-if test "$gdb_cv_var_elf" = yes; then
+if test "$gdb_cv_var_bfd_elf" = yes; then
AC_ARG_WITH(lzma,
AS_HELP_STRING([--with-lzma], [support lzma compression (auto/yes/no)]),
[], [with_lzma=auto])
;;
powerpc-*-aix* | rs6000-*-* | powerpc64-*-aix*)
# Target: PowerPC running AIX
- gdb_target_obs="rs6000-tdep.o rs6000-aix-tdep.o xcoffread.o \
+ gdb_target_obs="rs6000-tdep.o rs6000-aix-tdep.o \
ppc-sysv-tdep.o solib-aix.o \
ravenscar-thread.o ppc-ravenscar-thread.o"
;;
powerpc-*-lynx*178)
# Target: PowerPC running Lynx178.
gdb_target_obs="rs6000-tdep.o rs6000-lynx178-tdep.o \
- xcoffread.o ppc-sysv-tdep.o \
- ravenscar-thread.o ppc-ravenscar-thread.o"
+ ppc-sysv-tdep.o ravenscar-thread.o \
+ ppc-ravenscar-thread.o"
;;
powerpc*-*-*)
# Target: PowerPC running eabi
gdb_have_gcore=true
fi
done
+
+# Decide which file formats are absolutely required based on
+# the requested targets. Warn later that they are added, in
+# case the user didn't manually request them, or all readers.
+# It's fine to add the same format multiple times since the
+# loop that reads the options to FORMAT_OBS will ensure that
+# they are only added once.
+for i in $gdb_target_obs; do
+ case "${i}" in
+ *"windows-tdep.o" ) target_formats="${target_formats} coff";;
+ "rs6000-aix-tdep.o" ) target_formats="${target_formats} xcoff";;
+ "rs6000-lynx178-tdep.o" ) target_formats="${target_formats} xcoff";;
+ esac
+done
specified list of targets. The special value @samp{all} configures
@value{GDBN} for debugging programs running on any target it supports.
+@item --enable-binary-file-formats=@r{[}@var{format}@r{]}@dots{}
+@itemx --enable-binary-file-formats=all
+Configure @value{GDBN} to support certain binary file formats. If a
+format is the main (or only) file format for a given target, the
+configure script may add support to it anyway, and warn the user.
+If not given, all file formats that @value{GDBN} supports are compiled
+in.
+
@item --with-gdb-datadir=@var{path}
Set the @value{GDBN}-specific data directory. @value{GDBN} will look
here for certain supporting files or scripts. This defaults to the
--with-system-gdbinit-dir=%s%s\n\
"), SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_DIR_RELOCATABLE ? " (relocatable)" : "");
+#ifdef SUPPORTED_BINARY_FILE_FORMATS
+ gdb_printf (stream, _("\
+ --enable-binary-file-formats=%s\n"), SUPPORTED_BINARY_FILE_FORMATS);
+#endif
+
/* We assume "relocatable" will be printed at least once, thus we always
print this text. It's a reasonably safe assumption for now. */
gdb_printf (stream, _("\n\
projects / thirdparty / binutils-gdb.git / commitdiff
