phy: qcom: snps-femto-v2: drop clocks

There is a clock associated with this phy, but it's always from the
rpmhcc and isn't actually needed for the hardware to work.

Drop all the clock handling from the driver.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

diff --git a/drivers/phy/qcom/phy-qcom-snps-femto-v2.c b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c
index a1675b664e46fae23cc221103bdf3713cfba4fc3..04f0f0e7817d0f2bbd38c814bd5b5ca6507511ff 100644 (file)
--- a/drivers/phy/qcom/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c
@@ -6,8 +6,6 @@
  * Based on Linux driver
  */
 
-#include <clk.h>
-#include <clk-uclass.h>
 #include <dm.h>
 #include <dm/device_compat.h>
 #include <dm/devres.h>
@@ -17,7 +15,6 @@
 
 #include <asm/io.h>
 #include <linux/bitops.h>
-#include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 
@@ -62,7 +59,6 @@
 
 struct qcom_snps_hsphy {
        void __iomem *base;
-       struct clk_bulk clks;
        struct reset_ctl_bulk resets;
 };
 
@@ -143,8 +139,6 @@ static int qcom_snps_hsphy_power_on(struct phy *phy)
        struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev);
        int ret;
 
-       clk_enable_bulk(&priv->clks);
-
        ret = reset_deassert_bulk(&priv->resets);
        if (ret)
                return ret;
@@ -161,7 +155,6 @@ static int qcom_snps_hsphy_power_off(struct phy *phy)
        struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev);
 
        reset_assert_bulk(&priv->resets);
-       clk_disable_bulk(&priv->clks);
 
        return 0;
 }
@@ -175,19 +168,12 @@ static int qcom_snps_hsphy_phy_probe(struct udevice *dev)
        if (IS_ERR(priv->base))
                return PTR_ERR(priv->base);
 
-       ret = clk_get_bulk(dev, &priv->clks);
-       if (ret < 0 && ret != -ENOENT) {
-               printf("%s: Failed to get clocks %d\n", __func__, ret);
-               return ret;
-       }
-
        ret = reset_get_bulk(dev, &priv->resets);
        if (ret < 0) {
                printf("failed to get resets, ret = %d\n", ret);
                return ret;
        }
 
-       clk_enable_bulk(&priv->clks);
        reset_deassert_bulk(&priv->resets);
 
        return 0;