arm64: dts: rockchip: replace deprecated snps,reset props for NanoPi R3S

Replace deprecated snps,reset props and move them to the PHY node.

Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Link: https://lore.kernel.org/r/20241022193537.1117919-3-cnsztl@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
index 6bc17f755b798b1fd3acfa8072841dfeeaab2b4a..66a00cddda0c0437a73bb9eabf70aa93b57395aa 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
@@ -149,10 +149,6 @@
                     &gmac1m0_rx_bus2
                     &gmac1m0_rgmii_clk_level2
                     &gmac1m0_rgmii_bus_level3>;
-       snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
-       snps,reset-active-low;
-       /* Reset time is 20ms, 100ms for rtl8211f */
-       snps,reset-delays-us = <0 20000 100000>;
        status = "okay";
 };
 
@@ -414,6 +410,9 @@
                interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&eth_phy_reset_pin>;
+               reset-assert-us = <20000>;
+               reset-deassert-us = <100000>;
+               reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
        };
 };