* x86/aes.m4 (AES_ROUND): Use movzbl.

(AES_SUBST_BYTE): Likewise.

Rev: nettle/x86/aes.m4:1.3

diff --git a/x86/aes.m4 b/x86/aes.m4
index 97cb03af40dcd9b0e991efdd5020b896e4784c52..98f4e8160fd09baef770ba80abeaba08810746a1 100644 (file)
--- a/x86/aes.m4
+++ b/x86/aes.m4
@@ -1,3 +1,24 @@
+dnl BYTEREG(reg) gives the 8-bit register corresponding to the given 32-bit register.
+dnl Use in AES_SUBST_BYTE below, and is used by both the x86 and the x86_64 assembler.
+define(<BYTEREG>,<ifelse(
+       $1, %eax, %al,
+       $1, %ebx, %bl,
+       $1, %ecx, %cl,
+       $1, %edx, %dl,
+       dnl The rest are x86_64 only    
+       $1, %esi, %sil,
+       $1, %edi, %dil,
+       $1, %ebp, %bpl,
+       $1, %esp, %spl,
+       $1, %r8d, %r8b,
+       $1, %r9d, %r9b,
+       $1, %r10d, %r10b,
+       $1, %r11d, %r11b,
+       $1, %r12d, %r12b,
+       $1, %r13d, %r13b,
+       $1, %r14d, %r14b,
+       $1, %r15d, %r15b)>)dnl
+
 dnl AES_LOAD(a, b, c, d, src, key)
 dnl Loads the next block of data from src, and add the subkey pointed
 dnl to by key.
@@ -33,8 +54,7 @@ define(<AES_STORE>, <
 dnl AES_ROUND(table,a,b,c,d,out,tmp)
 dnl Computes one word of the AES round. Leaves result in $6.
 define(<AES_ROUND>, <
-       movl    $2, $7
-       andl    <$>0xff, $7
+       movzbl  BYTEREG($2), $7
        movl    AES_TABLE0 ($1, $7,4),$6
        movl    $3, $7
        shrl    <$>8,$7
@@ -46,7 +66,6 @@ define(<AES_ROUND>, <
        xorl    AES_TABLE2 ($1, $7, 4),$6
        movl    $5,$7                   C  fourth one
        shrl    <$>24,$7
-       andl    <$>0xff,$7
        xorl    AES_TABLE3 ($1, $7, 4),$6>)dnl
 
 dnl AES_FINAL_ROUND(a, b, c, d, out, tmp)
@@ -67,49 +86,24 @@ define(<AES_FINAL_ROUND>, <
        andl    <$>0xff000000,$6
        orl     $6, $5>)dnl
 
-dnl BYTEREG(reg) gives the 8-bit register corresponding to the given 32-bit register.
-dnl Use in AES_SUBST_BYTE below, and is used by both the x86 and the x86_64 assembler.
-define(<BYTEREG>,<ifelse(
-       $1, %eax, %al,
-       $1, %ebx, %bl,
-       $1, %ecx, %cl,
-       $1, %edx, %dl,
-       dnl The rest are x86_64 only    
-       $1, %esi, %sil,
-       $1, %edi, %dil,
-       $1, %ebp, %bpl,
-       $1, %esp, %spl,
-       $1, %r8d, %r8b,
-       $1, %r9d, %r9b,
-       $1, %r10d, %r10b,
-       $1, %r11d, %r11b,
-       $1, %r12d, %r12b,
-       $1, %r13d, %r13b,
-       $1, %r14d, %r14b,
-       $1, %r15d, %r15b)>)dnl
-
 dnl AES_SUBST_BYTE(A, B, C, D, table, tmp)
 dnl Substitutes the least significant byte of
 dnl each of eax, ebx, ecx and edx, and also rotates
 dnl the words one byte to the left.
 dnl Uses that AES_SBOX == 0
 define(<AES_SUBST_BYTE>, <
-       movl    $1,$6
-       andl    <$>0x000000ff,$6
+       movzbl  BYTEREG($1),$6
        movb    ($5, $6),BYTEREG($1)
        roll    <$>8,$1
 
-       movl    $2,$6
-       andl    <$>0x000000ff,$6
+       movzbl  BYTEREG($2),$6
        movb    ($5, $6),BYTEREG($2)
        roll    <$>8,$2
 
-       movl    $3,$6
-       andl    <$>0x000000ff,$6
+       movzbl  BYTEREG($3),$6
        movb    ($5, $6),BYTEREG($3)
        roll    <$>8,$3
 
-       movl    $4,$6
-       andl    <$>0x000000ff,$6
+       movzbl  BYTEREG($4),$6
        movb    ($5, $6),BYTEREG($4)
        roll    <$>8,$4>)dnl