arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node

The "brcm,bluetooth.yaml" binding has 'device-wakeup-gpios' and
'host-wakeup-gpios' property names, not '*-wake-gpios'.
Fix the incorrect property names.

Note that the "realtek,bluetooth.yaml" binding does use the
'*-wake-gpios' property names.

Fixes: d449121e5e8a ("arm64: dts: rockchip: Add Pine64 PineNote board")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20241008113344.23957-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index ae2536c65a83004e380dbecbc2b2b465dfc03be6..ca7666bf5c0a50d2744268b278edc6b22aa7be5f 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -684,8 +684,8 @@
                compatible = "brcm,bcm43438-bt";
                clocks = <&rk817 1>;
                clock-names = "lpo";
-               device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
-               host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+               device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+               host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
                reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
                pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
                pinctrl-names = "default";