Adding a "secure" version of STM32 boards (DK1/DK2/ED1/EV1), SCMI (clock/
reset) protocol and OP-TEE node have been added in SoC dtsi file
(stm32mp151.dtsi). They have been added with a status disabled in order to
keep our legacy unchanged. It is actually not enough to keep our legacy
unchanged.
First, just a reminder about our use case: TF-A (BL2) loads and starts
OP-TEE, then loads and runs U-Boot. U-Boot code checks if an OP-TEE is
running, if yes it searches in Kernel device tree if an OP-TEE node is
present:
-If the OP-TEE node is not present then U-Boot copies OP-TEE node and its
reserved memory region from U-Boot device tree to the kernel device tree.
-If the OP-TEE node is present then it does nothing (this OP-TEE node will
be used by Linux). So U-Boot lets the kernel device tree unchanged thinking
it is correct for an OP-TEE usage. It is the case for our legacy boards,
the OP-TEE node is present (although disabled) but the reserved memory
region is not declared. As no memory region has been reserved for OP-TEE,
the end of DDR is seen by the kernel as free and then used for CMA. But as
OP-TEE is running, this end of DDR is already used by OP-TEE. So as soon as
kernel tries to access to the CMA region OP-TEE raises an error.
To fix it, all OP-TEE node and SCMI is moved in a dedicated file.
Fixes: 40b4157dbd8c ("ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20220613071920.5463-1-alexandre.torgue@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+ firmware {
+ optee: optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ scmi: scmi {
+ compatible = "linaro,scmi-optee";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linaro,optee-channel-id = <0>;
+ shmem = <&scmi_shm>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+
+ scmi_reset: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+ };
+
+ soc {
+ scmi_sram: sram@2ffff000 {
+ compatible = "mmio-sram";
+ reg = <0x2ffff000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2ffff000 0x1000>;
+
+ scmi_shm: scmi-sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0 0x80>;
+ };
+ };
+ };
+};
status = "disabled";
};
- firmware {
- optee: optee {
- compatible = "linaro,optee-tz";
- method = "smc";
- status = "disabled";
- };
-
- scmi: scmi {
- compatible = "linaro,scmi-optee";
- #address-cells = <1>;
- #size-cells = <0>;
- linaro,optee-channel-id = <0>;
- shmem = <&scmi_shm>;
- status = "disabled";
-
- scmi_clk: protocol@14 {
- reg = <0x14>;
- #clock-cells = <1>;
- };
-
- scmi_reset: protocol@16 {
- reg = <0x16>;
- #reset-cells = <1>;
- };
- };
- };
-
soc {
compatible = "simple-bus";
#address-cells = <1>;
interrupt-parent = <&intc>;
ranges;
- scmi_sram: sram@2ffff000 {
- compatible = "mmio-sram";
- reg = <0x2ffff000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x2ffff000 0x1000>;
-
- scmi_shm: scmi-sram@0 {
- compatible = "arm,scmi-shmem";
- reg = <0 0x80>;
- status = "disabled";
- };
- };
-
timers2: timer@40000000 {
#address-cells = <1>;
#size-cells = <0>;
/dts-v1/;
#include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
resets = <&scmi_reset RST_SCMI_MCU>;
};
-&optee {
- status = "okay";
-};
-
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
-
-&scmi {
- status = "okay";
-};
-
-&scmi_shm {
- status = "okay";
-};
/dts-v1/;
#include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
resets = <&scmi_reset RST_SCMI_MCU>;
};
-&optee {
- status = "okay";
-};
-
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
-
-&scmi {
- status = "okay";
-};
-
-&scmi_shm {
- status = "okay";
-};
/dts-v1/;
#include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
resets = <&scmi_reset RST_SCMI_MCU>;
};
-&optee {
- status = "okay";
-};
-
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
-
-&scmi {
- status = "okay";
-};
-
-&scmi_shm {
- status = "okay";
-};
/dts-v1/;
#include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
resets = <&scmi_reset RST_SCMI_MCU>;
};
-&optee {
- status = "okay";
-};
-
&rcc {
compatible = "st,stm32mp1-rcc-secure", "syscon";
clock-names = "hse", "hsi", "csi", "lse", "lsi";
&rtc {
clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
};
-
-&scmi {
- status = "okay";
-};
-
-&scmi_shm {
- status = "okay";
-};