arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

Fxtec Pro1x uses the same display (BOE BF060Y8M-AJ0) as Pro1.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-6-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 0e2e404341db4860d9eb3e018a8c5b6d85ce9514..e3db9bd7e6a31dcca0503bc0c1cc52c3cf71fb6d 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -33,6 +33,26 @@
                };
        };
 
+       disp_elvdd_supply: disp-elvdd-supply {
+               compatible = "regulator-fixed";
+               regulator-name = "disp_elvdd_supply";
+       };
+
+       disp_elvss_supply: disp-elvss-supply {
+               compatible = "regulator-fixed";
+               regulator-name = "disp_elvss_supply";
+       };
+
+       disp_vcc_supply: disp-vcc-supply {
+               compatible = "regulator-fixed";
+               regulator-name = "disp_vcc_supply";
+       };
+
+       disp_vci_supply: disp-vci-supply {
+               compatible = "regulator-fixed";
+               regulator-name = "disp_vci_supply";
+       };
+
        gpio-keys {
                compatible = "gpio-keys";
 
@@ -93,13 +113,16 @@
        };
 };
 
-&dispcc {
-       /* HACK: disable until a panel driver is ready to retain simplefb */
-       status = "disabled";
+&gpi_dma0 {
+       status = "okay";
 };
 
-&gpi_dma0 {
+&gpu {
        status = "okay";
+
+       zap-shader {
+               firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
+       };
 };
 
 &i2c1 {
@@ -136,6 +159,46 @@
        };
 };
 
+&mdss {
+       status = "okay";
+};
+
+&mdss_dsi0 {
+       vdda-supply = <&pm6125_l18a>;
+       status = "okay";
+
+       panel: panel@0 {
+               compatible = "boe,bf060y8m-aj0";
+               reg = <0>;
+
+               reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+
+               elvdd-supply = <&disp_elvdd_supply>;
+               elvss-supply = <&disp_elvss_supply>;
+               vcc-supply = <&disp_vcc_supply>;
+               vci-supply = <&disp_vci_supply>;
+               vddio-supply = <&pm6125_l9a>;
+
+               pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
+               pinctrl-names = "default";
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&mdss_dsi0_out>;
+                       };
+               };
+       };
+};
+
+&mdss_dsi0_out {
+       data-lanes = <0 1 2 3>;
+       remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+       status = "okay";
+};
+
 &pm6125_gpios {
        vol_up_n: vol-up-n-state {
                pins = "gpio5";
@@ -338,6 +401,12 @@
                bias-pull-up;
        };
 
+       panel_en_n: panel-en-n-state {
+               pins = "gpio65";
+               function = "gpio";
+               bias-disable;
+       };
+
        ts_rst_n: ts-rst-n-state {
                pins = "gpio71";
                function = "gpio";
@@ -352,6 +421,13 @@
                bias-pull-up;
        };
 
+       mdss_dsi_n: mdss-dsi-n-state {
+               pins = "gpio82";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-disable;
+       };
+
        hall_sensor_n: hall-sensor-n-state {
                pins = "gpio96";
                function = "gpio";