should configure, build, and install this package. The first line,
which bootstraps, is intended for developers; when building from
-distribution tarballs it does nothing and can be skipped.
+distribution tarballs it does nothing and can be skipped. A package
+might name the bootstrapping script differently; if the name is
+‘autogen.sh’, for example, the first line should say ‘./autogen.sh’
+instead of ‘./bootstrap’.
The following more-detailed instructions are generic; see the
‘README’ file for instructions specific to this package. Some packages
Many packages have scripts meant for developers instead of ordinary
builders, as they may use developer tools that are less commonly
installed, or they may access the network, which has privacy
-implications. If the ‘bootstrap’ shell script exists, it attempts to
-build the ‘configure’ shell script and related files, possibly using
-developer tools or the network. Because the output of ‘bootstrap’ is
-system-independent, it is normally run by a package developer so that
-its output can be put into the distribution tarball and ordinary
-builders and users need not run ‘bootstrap’. Some packages have
-commands like ‘./autopull.sh’ and ‘./autogen.sh’ that you can run
-instead of ‘./bootstrap’, for more fine-grained control over
-bootstrapping.
-
- The ‘configure’ shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a ‘Makefile’ in each directory of the package.
-It may also create one or more ‘.h’ files containing system-dependent
-definitions. Finally, it creates a shell script ‘config.status’ that
-you can run in the future to recreate the current configuration, and a
-file ‘config.log’ containing output useful for debugging ‘configure’.
+implications. These scripts attempt to bootstrap by building the
+‘configure’ script and related files, possibly using developer tools or
+the network. Because the output of bootstrapping is system-independent,
+it is normally run by a package developer so that its output can be put
+into the distribution tarball and ordinary builders and users need not
+bootstrap. Some packages have commands like ‘./autopull.sh’ and
+‘./autogen.sh’ that you can run instead of ‘./bootstrap’, for more
+fine-grained control over bootstrapping.
+
+ The ‘configure’ script attempts to guess correct values for various
+system-dependent variables used during compilation. It uses those
+values to create a ‘Makefile’ in each directory of the package. It may
+also create one or more ‘.h’ files containing system-dependent
+definitions. Finally, it creates a script ‘config.status’ that you can
+run in the future to recreate the current configuration, and a file
+‘config.log’ containing output useful for debugging ‘configure’.
It can also use an optional file (typically called ‘config.cache’ and
enabled with ‘--cache-file=config.cache’ or simply ‘-C’) that saves the
1. ‘cd’ to the directory containing the package’s source code.
2. If this is a developer checkout and file ‘configure’ does not yet
- exist, type ‘./bootstrap’ to create it. You may need special
- developer tools and network access to bootstrap, and the network
- access may have privacy implications.
+ exist, run the bootstrapping script (typically ‘./bootstrap’ or
+ ‘./autogen.sh’) to bootstrap and create the file. You may need
+ special developer tools and network access to bootstrap, and the
+ network access may have privacy implications.
3. Type ‘./configure’ to configure the package for your system. This
might take a while. While running, ‘configure’ prints messages
Copyright notice
================
- Copyright © 1994–1996, 1999–2002, 2004–2017, 2020–2024 Free Software
+ Copyright © 1994–1996, 1999–2002, 2004–2017, 2020–2025 Free Software
Foundation, Inc.
Copying and distribution of this file, with or without modification,
should configure, build, and install this package. The first line,
which bootstraps, is intended for developers; when building from
-distribution tarballs it does nothing and can be skipped.
+distribution tarballs it does nothing and can be skipped. A package
+might name the bootstrapping script differently; if the name is
+‘autogen.sh’, for example, the first line should say ‘./autogen.sh’
+instead of ‘./bootstrap’.
The following more-detailed instructions are generic; see the
‘README’ file for instructions specific to this package. Some packages
Many packages have scripts meant for developers instead of ordinary
builders, as they may use developer tools that are less commonly
installed, or they may access the network, which has privacy
-implications. If the ‘bootstrap’ shell script exists, it attempts to
-build the ‘configure’ shell script and related files, possibly using
-developer tools or the network. Because the output of ‘bootstrap’ is
-system-independent, it is normally run by a package developer so that
-its output can be put into the distribution tarball and ordinary
-builders and users need not run ‘bootstrap’. Some packages have
-commands like ‘./autopull.sh’ and ‘./autogen.sh’ that you can run
-instead of ‘./bootstrap’, for more fine-grained control over
-bootstrapping.
-
- The ‘configure’ shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a ‘Makefile’ in each directory of the package.
-It may also create one or more ‘.h’ files containing system-dependent
-definitions. Finally, it creates a shell script ‘config.status’ that
-you can run in the future to recreate the current configuration, and a
-file ‘config.log’ containing output useful for debugging ‘configure’.
+implications. These scripts attempt to bootstrap by building the
+‘configure’ script and related files, possibly using developer tools or
+the network. Because the output of bootstrapping is system-independent,
+it is normally run by a package developer so that its output can be put
+into the distribution tarball and ordinary builders and users need not
+bootstrap. Some packages have commands like ‘./autopull.sh’ and
+‘./autogen.sh’ that you can run instead of ‘./bootstrap’, for more
+fine-grained control over bootstrapping.
+
+ The ‘configure’ script attempts to guess correct values for various
+system-dependent variables used during compilation. It uses those
+values to create a ‘Makefile’ in each directory of the package. It may
+also create one or more ‘.h’ files containing system-dependent
+definitions. Finally, it creates a script ‘config.status’ that you can
+run in the future to recreate the current configuration, and a file
+‘config.log’ containing output useful for debugging ‘configure’.
It can also use an optional file (typically called ‘config.cache’ and
enabled with ‘--cache-file=config.cache’ or simply ‘-C’) that saves the
1. ‘cd’ to the directory containing the package’s source code.
2. If this is a developer checkout and file ‘configure’ does not yet
- exist, type ‘./bootstrap’ to create it. You may need special
- developer tools and network access to bootstrap, and the network
- access may have privacy implications.
+ exist, run the bootstrapping script (typically ‘./bootstrap’ or
+ ‘./autogen.sh’) to bootstrap and create the file. You may need
+ special developer tools and network access to bootstrap, and the
+ network access may have privacy implications.
3. Type ‘./configure’ to configure the package for your system. This
might take a while. While running, ‘configure’ prints messages
# shellcheck disable=SC2006,SC2268 # see below for rationale
-timestamp='2024-01-01'
+timestamp='2024-07-27'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
dummy=$tmp/dummy
case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
,,) echo "int x;" > "$dummy.c"
- for driver in cc gcc c89 c99 ; do
+ for driver in cc gcc c17 c99 c89 ; do
if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
CC_FOR_BUILD=$driver
break
sed 's/^ //' << EOF > "$dummy.c"
#include <sys/systemcfg.h>
- main()
+ int
+ main ()
{
if (!__power_pc())
exit(1);
#include <stdlib.h>
#include <unistd.h>
- int main ()
+ int
+ main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
#endif
#endif
#endif
+int
main ()
{
#if defined (sony)
# Configuration validation subroutine script.
# Copyright 1992-2024 Free Software Foundation, Inc.
-# shellcheck disable=SC2006,SC2268 # see below for rationale
+# shellcheck disable=SC2006,SC2268,SC2162 # see below for rationale
-timestamp='2024-01-01'
+timestamp='2024-05-27'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
esac
# Split fields of configuration type
-# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read field1 field2 field3 field4 <<EOF
$1
# parts
maybe_os=$field2-$field3
case $maybe_os in
- nto-qnx* | linux-* | uclinux-uclibc* \
- | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \
- | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
- | storm-chaos* | os2-emx* | rtmk-nova* | managarm-* \
+ cloudabi*-eabi* \
+ | kfreebsd*-gnu* \
+ | knetbsd*-gnu* \
+ | kopensolaris*-gnu* \
+ | linux-* \
+ | managarm-* \
+ | netbsd*-eabi* \
+ | netbsd*-gnu* \
+ | nto-qnx* \
+ | os2-emx* \
+ | rtmk-nova* \
+ | storm-chaos* \
+ | uclinux-gnu* \
+ | uclinux-uclibc* \
| windows-* )
basic_machine=$field1
basic_os=$maybe_os
esac
;;
*-*)
- # A lone config we happen to match not fitting any pattern
case $field1-$field2 in
+ # Shorthands that happen to contain a single dash
+ convex-c[12] | convex-c3[248])
+ basic_machine=$field2-convex
+ basic_os=
+ ;;
decstation-3100)
basic_machine=mips-dec
basic_os=
*-*)
# Second component is usually, but not always the OS
case $field2 in
- # Prevent following clause from handling this valid os
+ # Do not treat sunos as a manufacturer
sun*os*)
basic_machine=$field1
basic_os=$field2
;;
- zephyr*)
- basic_machine=$field1-unknown
- basic_os=$field2
- ;;
# Manufacturers
- dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \
- | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \
- | unicom* | ibm* | next | hp | isi* | apollo | altos* \
- | convergent* | ncr* | news | 32* | 3600* | 3100* \
- | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \
- | ultra | tti* | harris | dolphin | highlevel | gould \
- | cbm | ns | masscomp | apple | axis | knuth | cray \
- | microblaze* | sim | cisco \
- | oki | wec | wrs | winbond)
+ 3100* \
+ | 32* \
+ | 3300* \
+ | 3600* \
+ | 7300* \
+ | acorn \
+ | altos* \
+ | apollo \
+ | apple \
+ | atari \
+ | att* \
+ | axis \
+ | be \
+ | bull \
+ | cbm \
+ | ccur \
+ | cisco \
+ | commodore \
+ | convergent* \
+ | convex* \
+ | cray \
+ | crds \
+ | dec* \
+ | delta* \
+ | dg \
+ | digital \
+ | dolphin \
+ | encore* \
+ | gould \
+ | harris \
+ | highlevel \
+ | hitachi* \
+ | hp \
+ | ibm* \
+ | intergraph \
+ | isi* \
+ | knuth \
+ | masscomp \
+ | microblaze* \
+ | mips* \
+ | motorola* \
+ | ncr* \
+ | news \
+ | next \
+ | ns \
+ | oki \
+ | omron* \
+ | pc533* \
+ | rebel \
+ | rom68k \
+ | rombug \
+ | semi \
+ | sequent* \
+ | siemens \
+ | sgi* \
+ | siemens \
+ | sim \
+ | sni \
+ | sony* \
+ | stratus \
+ | sun \
+ | sun[234]* \
+ | tektronix \
+ | tti* \
+ | ultra \
+ | unicom* \
+ | wec \
+ | winbond \
+ | wrs)
basic_machine=$field1-$field2
basic_os=
;;
+ zephyr*)
+ basic_machine=$field1-unknown
+ basic_os=$field2
+ ;;
*)
basic_machine=$field1
basic_os=$field2
basic_machine=arm-unknown
basic_os=cegcc
;;
- convex-c1)
- basic_machine=c1-convex
- basic_os=bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- basic_os=bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- basic_os=bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- basic_os=bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- basic_os=bsd
- ;;
cray)
basic_machine=j90-cray
basic_os=unicos
vendor=dec
basic_os=tops20
;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
+ delta | 3300 | delta-motorola | 3300-motorola | motorola-delta | motorola-3300)
cpu=m68k
vendor=motorola
;;
- dpx2*)
+ # This used to be dpx2*, but that gets the RS6000-based
+ # DPX/20 and the x86-based DPX/2-100 wrong. See
+ # https://oldskool.silicium.org/stations/bull_dpx20.htm
+ # https://www.feb-patrimoine.com/english/bull_dpx2.htm
+ # https://www.feb-patrimoine.com/english/unix_and_bull.htm
+ dpx2 | dpx2[23]00 | dpx2[23]xx)
cpu=m68k
vendor=bull
- basic_os=sysv3
+ ;;
+ dpx2100 | dpx21xx)
+ cpu=i386
+ vendor=bull
+ ;;
+ dpx20)
+ cpu=rs6000
+ vendor=bull
;;
encore | umax | mmax)
cpu=ns32k
next | m*-next)
cpu=m68k
vendor=next
- case $basic_os in
- openstep*)
- ;;
- nextstep*)
- ;;
- ns2*)
- basic_os=nextstep2
- ;;
- *)
- basic_os=nextstep3
- ;;
- esac
;;
np1)
cpu=np1
;;
*-*)
- # shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read cpu vendor <<EOF
$basic_machine
# Decode basic machines in the full and proper CPU-Company form.
case $cpu-$vendor in
- # Here we handle the default manufacturer of certain CPU types in canonical form. It is in
- # some cases the only manufacturer, in others, it is the most popular.
+ # Here we handle the default manufacturer of certain CPU types in canonical form.
+ # It is in some cases the only manufacturer, in others, it is the most popular.
+ c[12]-convex | c[12]-unknown | c3[248]-convex | c3[248]-unknown)
+ vendor=convex
+ basic_os=${basic_os:-bsd}
+ ;;
craynv-unknown)
vendor=cray
basic_os=${basic_os:-unicosmp}
;;
c90-unknown | c90-cray)
vendor=cray
- basic_os=${Basic_os:-unicos}
+ basic_os=${basic_os:-unicos}
;;
fx80-unknown)
vendor=alliant
vendor=alt
basic_os=${basic_os:-linux-gnueabihf}
;;
- dpx20-unknown | dpx20-bull)
- cpu=rs6000
- vendor=bull
+
+ # Normalized CPU+vendor pairs that imply an OS, if not otherwise specified
+ m68k-isi)
+ basic_os=${basic_os:-sysv}
+ ;;
+ m68k-sony)
+ basic_os=${basic_os:-newsos}
+ ;;
+ m68k-tektronix)
+ basic_os=${basic_os:-bsd}
+ ;;
+ m88k-harris)
+ basic_os=${basic_os:-sysv3}
+ ;;
+ i386-bull | m68k-bull)
+ basic_os=${basic_os:-sysv3}
+ ;;
+ rs6000-bull)
basic_os=${basic_os:-bosx}
;;
+ mips-sni)
+ basic_os=${basic_os:-sysv4}
+ ;;
# Here we normalize CPU types irrespective of the vendor
amd64-*)
;;
blackfin-*)
cpu=bfin
- basic_os=linux
+ basic_os=${basic_os:-linux}
;;
c54x-*)
cpu=tic54x
;;
m68knommu-*)
cpu=m68k
- basic_os=linux
+ basic_os=${basic_os:-linux}
;;
m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*)
cpu=s12z
;;
parisc-*)
cpu=hppa
- basic_os=linux
+ basic_os=${basic_os:-linux}
;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
cpu=i586
pentium4-*)
cpu=i786
;;
- pc98-*)
- cpu=i386
- ;;
ppc-* | ppcbe-*)
cpu=powerpc
;;
tx39el-*)
cpu=mipstx39el
;;
- x64-*)
- cpu=x86_64
- ;;
xscale-* | xscalee[bl]-*)
cpu=`echo "$cpu" | sed 's/^xscale/arm/'`
;;
# Recognize the canonical CPU types that are allowed with any
# company name.
case $cpu in
- 1750a | 580 \
+ 1750a \
+ | 580 \
+ | [cjt]90 \
| a29k \
- | aarch64 | aarch64_be | aarch64c | arm64ec \
+ | aarch64 \
+ | aarch64_be \
+ | aarch64c \
| abacus \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \
- | alphapca5[67] | alpha64pca5[67] \
+ | alpha \
+ | alpha64 \
+ | alpha64ev56 \
+ | alpha64ev6[78] \
+ | alpha64ev[4-8] \
+ | alpha64pca5[67] \
+ | alphaev56 \
+ | alphaev6[78] \
+ | alphaev[4-8] \
+ | alphapca5[67] \
| am33_2.0 \
| amdgcn \
- | arc | arceb | arc32 | arc64 \
- | arm | arm[lb]e | arme[lb] | armv* \
- | avr | avr32 \
+ | arc \
+ | arc32 \
+ | arc64 \
+ | arceb \
+ | arm \
+ | arm64e \
+ | arm64ec \
+ | arm[lb]e \
+ | arme[lb] \
+ | armv* \
| asmjs \
+ | avr \
+ | avr32 \
| ba \
- | be32 | be64 \
- | bfin | bpf | bs2000 \
- | c[123]* | c30 | [cjt]90 | c4x \
- | c8051 | clipper | craynv | csky | cydra \
- | d10v | d30v | dlx | dsp16xx \
- | e2k | elxsi | epiphany \
- | f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \
- | javascript \
- | h8300 | h8500 \
- | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | be32 \
+ | be64 \
+ | bfin \
+ | bpf \
+ | bs2000 \
+ | c30 \
+ | c4x \
+ | c8051 \
+ | c[123]* \
+ | clipper \
+ | craynv \
+ | csky \
+ | cydra \
+ | d10v \
+ | d30v \
+ | dlx \
+ | dsp16xx \
+ | e2k \
+ | elxsi \
+ | epiphany \
+ | f30[01] \
+ | f700 \
+ | fido \
+ | fr30 \
+ | frv \
+ | ft32 \
+ | fx80 \
+ | h8300 \
+ | h8500 \
| hexagon \
- | i370 | i*86 | i860 | i960 | ia16 | ia64 \
- | ip2k | iq2000 \
+ | hppa \
+ | hppa1.[01] \
+ | hppa2.0 \
+ | hppa2.0[nw] \
+ | hppa64 \
+ | i*86 \
+ | i370 \
+ | i860 \
+ | i960 \
+ | ia16 \
+ | ia64 \
+ | ip2k \
+ | iq2000 \
+ | javascript \
| k1om \
| kvx \
- | le32 | le64 \
+ | le32 \
+ | le64 \
| lm32 \
- | loongarch32 | loongarch64 \
- | m32c | m32r | m32rle \
- | m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \
- | m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \
- | m88110 | m88k | maxq | mb | mcore | mep | metag \
- | microblaze | microblazeel \
+ | loongarch32 \
+ | loongarch64 \
+ | m32c \
+ | m32r \
+ | m32rle \
+ | m5200 \
+ | m68000 \
+ | m680[012346]0 \
+ | m6811 \
+ | m6812 \
+ | m68360 \
+ | m683?2 \
+ | m68hc11 \
+ | m68hc12 \
+ | m68hcs12x \
+ | m68k \
+ | m88110 \
+ | m88k \
+ | maxq \
+ | mb \
+ | mcore \
+ | mep \
+ | metag \
+ | microblaze \
+ | microblazeel \
| mips* \
| mmix \
- | mn10200 | mn10300 \
+ | mn10200 \
+ | mn10300 \
| moxie \
- | mt \
| msp430 \
+ | mt \
| nanomips* \
- | nds32 | nds32le | nds32be \
+ | nds32 \
+ | nds32be \
+ | nds32le \
| nfp \
- | nios | nios2 | nios2eb | nios2el \
- | none | np1 | ns16k | ns32k | nvptx \
+ | nios \
+ | nios2 \
+ | nios2eb \
+ | nios2el \
+ | none \
+ | np1 \
+ | ns16k \
+ | ns32k \
+ | nvptx \
| open8 \
| or1k* \
| or32 \
| orion \
+ | pdp10 \
+ | pdp11 \
| picochip \
- | pdp10 | pdp11 | pj | pjl | pn | power \
- | powerpc | powerpc64 | powerpc64le | powerpcle | powerpcspe \
+ | pj \
+ | pjl \
+ | pn \
+ | power \
+ | powerpc \
+ | powerpc64 \
+ | powerpc64le \
+ | powerpcle \
+ | powerpcspe \
| pru \
| pyramid \
- | riscv | riscv32 | riscv32be | riscv64 | riscv64be \
- | rl78 | romp | rs6000 | rx \
- | s390 | s390x \
+ | riscv \
+ | riscv32 \
+ | riscv32be \
+ | riscv64 \
+ | riscv64be \
+ | rl78 \
+ | romp \
+ | rs6000 \
+ | rx \
+ | s390 \
+ | s390x \
| score \
- | sh | shl \
- | sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb] | sh[lb]e \
- | sh[1234]e[lb] | sh[12345][lb]e | sh[23]ele | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet \
+ | sh \
+ | sh64 \
+ | sh64le \
+ | sh[12345][lb]e \
+ | sh[1234] \
+ | sh[1234]e[lb] \
+ | sh[23]e \
+ | sh[23]ele \
+ | sh[24]a \
+ | sh[24]ae[lb] \
+ | sh[lb]e \
+ | she[lb] \
+ | shl \
+ | sparc \
+ | sparc64 \
+ | sparc64b \
+ | sparc64v \
+ | sparc86x \
+ | sparclet \
| sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \
+ | sparcv8 \
+ | sparcv9 \
+ | sparcv9b \
+ | sparcv9v \
| spu \
+ | sv1 \
+ | sx* \
| tahoe \
| thumbv7* \
- | tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \
+ | tic30 \
+ | tic4x \
+ | tic54x \
+ | tic55x \
+ | tic6x \
+ | tic80 \
| tron \
| ubicom32 \
- | v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \
+ | v70 \
+ | v810 \
+ | v850 \
+ | v850e \
+ | v850e1 \
+ | v850e2 \
+ | v850e2v3 \
+ | v850es \
| vax \
| vc4 \
| visium \
| w65 \
- | wasm32 | wasm64 \
+ | wasm32 \
+ | wasm64 \
| we32k \
- | x86 | x86_64 | xc16x | xgate | xps100 \
- | xstormy16 | xtensa* \
+ | x86 \
+ | x86_64 \
+ | xc16x \
+ | xgate \
+ | xps100 \
+ | xstormy16 \
+ | xtensa* \
| ymp \
- | z8k | z80)
+ | z80 \
+ | z8k)
;;
*)
os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'`
;;
*-*)
- # shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read kernel os <<EOF
$basic_os
unixware*)
os=sysv4.2uw
;;
+ # The marketing names for NeXT's operating systems were
+ # NeXTSTEP, NeXTSTEP 2, OpenSTEP 3, OpenSTEP 4. 'openstep' is
+ # mapped to 'openstep3', but 'openstep1' and 'openstep2' are
+ # mapped to 'nextstep' and 'nextstep2', consistent with the
+ # treatment of SunOS/Solaris.
+ ns | ns1 | nextstep | nextstep1 | openstep1)
+ os=nextstep
+ ;;
+ ns2 | nextstep2 | openstep2)
+ os=nextstep2
+ ;;
+ ns3 | nextstep3 | openstep | openstep3)
+ os=openstep3
+ ;;
+ ns4 | nextstep4 | openstep4)
+ os=openstep4
+ ;;
# es1800 is here to avoid being matched by es* (a different OS)
es1800*)
os=ose
;;
utek*)
os=bsd
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|tektronix|'`
;;
dynix*)
os=bsd
386bsd)
os=bsd
;;
- ctix* | uts*)
+ ctix*)
os=sysv
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|convergent|'`
;;
- nova*)
- os=rtmk-nova
+ uts*)
+ os=sysv
;;
- ns2)
- os=nextstep2
+ nova*)
+ kernel=rtmk
+ os=nova
;;
# Preserve the version number of sinix5.
sinix5.*)
os=`echo "$os" | sed -e 's|sinix|sysv|'`
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|sni|'`
;;
sinix*)
os=sysv4
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|sni|'`
;;
tpf*)
os=tpf
os=
obj=elf
;;
+ # The -sgi and -siemens entries must be before the mips- entry
+ # or we get the wrong os.
+ *-sgi)
+ os=irix
+ ;;
+ *-siemens)
+ os=sysv4
+ ;;
mips*-cisco)
os=
obj=elf
os=
obj=coff
;;
- *-tti) # must be before sparc entry or we get the wrong os.
+ # This must be before the sparc-* entry or we get the wrong os.
+ *-tti)
os=sysv3
;;
sparc-* | *-sun)
os=hpux
;;
*-hitachi)
- os=hiux
+ os=hiuxwe2
;;
i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
os=sysv
*-encore)
os=bsd
;;
- *-sgi)
- os=irix
- ;;
- *-siemens)
- os=sysv4
- ;;
*-masscomp)
os=rtu
;;
ghcjs)
;;
# Now accept the basic system types.
- # The portable systems comes first.
# Each alternative MUST end in a * to match a version number.
- gnu* | android* | bsd* | mach* | minix* | genix* | ultrix* | irix* \
- | *vms* | esix* | aix* | cnk* | sunos | sunos[34]* \
- | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \
- | sym* | plan9* | psp* | sim* | xray* | os68k* | v88r* \
- | hiux* | abug | nacl* | netware* | windows* \
- | os9* | macos* | osx* | ios* | tvos* | watchos* \
- | mpw* | magic* | mmixware* | mon960* | lnews* \
- | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \
- | aos* | aros* | cloudabi* | sortix* | twizzler* \
- | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \
- | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \
- | mirbsd* | netbsd* | dicos* | openedition* | ose* \
- | bitrig* | openbsd* | secbsd* | solidbsd* | libertybsd* | os108* \
- | ekkobsd* | freebsd* | riscix* | lynxos* | os400* \
- | bosx* | nextstep* | cxux* | oabi* \
- | ptx* | ecoff* | winnt* | domain* | vsta* \
- | udi* | lites* | ieee* | go32* | aux* | hcos* \
- | chorusrdb* | cegcc* | glidix* | serenity* \
- | cygwin* | msys* | moss* | proelf* | rtems* \
- | midipix* | mingw32* | mingw64* | mint* \
- | uxpv* | beos* | mpeix* | udk* | moxiebox* \
- | interix* | uwin* | mks* | rhapsody* | darwin* \
- | openstep* | oskit* | conix* | pw32* | nonstopux* \
- | storm-chaos* | tops10* | tenex* | tops20* | its* \
- | os2* | vos* | palmos* | uclinux* | nucleus* | morphos* \
- | scout* | superux* | sysv* | rtmk* | tpf* | windiss* \
- | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \
- | skyos* | haiku* | rdos* | toppers* | drops* | es* \
- | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
- | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \
- | nsk* | powerunix* | genode* | zvmoe* | qnx* | emx* | zephyr* \
- | fiwix* | mlibc* | cos* | mbr* | ironclad* )
+ abug \
+ | aix* \
+ | amdhsa* \
+ | amigados* \
+ | amigaos* \
+ | android* \
+ | aof* \
+ | aos* \
+ | aros* \
+ | atheos* \
+ | auroraux* \
+ | aux* \
+ | beos* \
+ | bitrig* \
+ | bme* \
+ | bosx* \
+ | bsd* \
+ | cegcc* \
+ | chorusos* \
+ | chorusrdb* \
+ | clix* \
+ | cloudabi* \
+ | cnk* \
+ | conix* \
+ | cos* \
+ | cxux* \
+ | cygwin* \
+ | darwin* \
+ | dgux* \
+ | dicos* \
+ | dnix* \
+ | domain* \
+ | dragonfly* \
+ | drops* \
+ | ebmon* \
+ | ecoff* \
+ | ekkobsd* \
+ | emscripten* \
+ | emx* \
+ | es* \
+ | fiwix* \
+ | freebsd* \
+ | fuchsia* \
+ | genix* \
+ | genode* \
+ | glidix* \
+ | gnu* \
+ | go32* \
+ | haiku* \
+ | hcos* \
+ | hiux* \
+ | hms* \
+ | hpux* \
+ | ieee* \
+ | interix* \
+ | ios* \
+ | iris* \
+ | irix* \
+ | ironclad* \
+ | isc* \
+ | its* \
+ | l4re* \
+ | libertybsd* \
+ | lites* \
+ | lnews* \
+ | luna* \
+ | lynxos* \
+ | mach* \
+ | macos* \
+ | magic* \
+ | mbr* \
+ | midipix* \
+ | midnightbsd* \
+ | mingw32* \
+ | mingw64* \
+ | minix* \
+ | mint* \
+ | mirbsd* \
+ | mks* \
+ | mlibc* \
+ | mmixware* \
+ | mon960* \
+ | morphos* \
+ | moss* \
+ | moxiebox* \
+ | mpeix* \
+ | mpw* \
+ | msdos* \
+ | msys* \
+ | mvs* \
+ | nacl* \
+ | netbsd* \
+ | netware* \
+ | newsos* \
+ | nextstep* \
+ | nindy* \
+ | nonstopux* \
+ | nova* \
+ | nsk* \
+ | nucleus* \
+ | nx6 \
+ | nx7 \
+ | oabi* \
+ | ohos* \
+ | onefs* \
+ | openbsd* \
+ | openedition* \
+ | openstep* \
+ | os108* \
+ | os2* \
+ | os400* \
+ | os68k* \
+ | os9* \
+ | ose* \
+ | osf* \
+ | oskit* \
+ | osx* \
+ | palmos* \
+ | phoenix* \
+ | plan9* \
+ | powermax* \
+ | powerunix* \
+ | proelf* \
+ | psos* \
+ | psp* \
+ | ptx* \
+ | pw32* \
+ | qnx* \
+ | rdos* \
+ | redox* \
+ | rhapsody* \
+ | riscix* \
+ | riscos* \
+ | rtems* \
+ | rtmk* \
+ | rtu* \
+ | scout* \
+ | secbsd* \
+ | sei* \
+ | serenity* \
+ | sim* \
+ | skyos* \
+ | solaris* \
+ | solidbsd* \
+ | sortix* \
+ | storm-chaos* \
+ | sunos \
+ | sunos[34]* \
+ | superux* \
+ | syllable* \
+ | sym* \
+ | sysv* \
+ | tenex* \
+ | tirtos* \
+ | toppers* \
+ | tops10* \
+ | tops20* \
+ | tpf* \
+ | tvos* \
+ | twizzler* \
+ | uclinux* \
+ | udi* \
+ | udk* \
+ | ultrix* \
+ | unicos* \
+ | uniplus* \
+ | unleashed* \
+ | unos* \
+ | uwin* \
+ | uxpv* \
+ | v88r* \
+ |*vms* \
+ | vos* \
+ | vsta* \
+ | vxsim* \
+ | vxworks* \
+ | wasi* \
+ | watchos* \
+ | wince* \
+ | windiss* \
+ | windows* \
+ | winnt* \
+ | xenix* \
+ | xray* \
+ | zephyr* \
+ | zvmoe* )
;;
# This one is extra strict with allowed versions
sco3.2v2 | sco3.2v[4-9]* | sco5v6*)
case $kernel-$os-$obj in
linux-gnu*- | linux-android*- | linux-dietlibc*- | linux-llvm*- \
| linux-mlibc*- | linux-musl*- | linux-newlib*- \
- | linux-relibc*- | linux-uclibc*- )
+ | linux-relibc*- | linux-uclibc*- | linux-ohos*- )
;;
- uclinux-uclibc*- )
+ uclinux-uclibc*- | uclinux-gnu*- )
;;
managarm-mlibc*- | managarm-kernel*- )
;;
echo "Invalid configuration '$1': '$os' needs 'windows'." 1>&2
exit 1
;;
- kfreebsd*-gnu*- | kopensolaris*-gnu*-)
+ kfreebsd*-gnu*- | knetbsd*-gnu*- | netbsd*-gnu*- | kopensolaris*-gnu*-)
;;
vxworks-simlinux- | vxworks-simwindows- | vxworks-spe-)
;;
;;
os2-emx-)
;;
+ rtmk-nova-)
+ ;;
*-eabi*- | *-gnueabi*-)
;;
none--*)
*-riscix*)
vendor=acorn
;;
- *-sunos*)
+ *-sunos* | *-solaris*)
vendor=sun
;;
*-cnk* | *-aix*)
# gendocs.sh -- generate a GNU manual in many formats. This script is
# mentioned in maintain.texi. See the help message below for usage details.
-scriptversion=2024-07-04.03
+scriptversion=2025-01-01.00
-# Copyright 2003-2024 Free Software Foundation, Inc.
+# Copyright 2003-2025 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
version="gendocs.sh $scriptversion
-Copyright 2024 Free Software Foundation, Inc.
+Copyright 2025-2025 Free Software Foundation, Inc.
There is NO warranty. You may redistribute this software
under the terms of the GNU General Public License.
For more information about these matters, see the files named COPYING."
<!-- Parent-Version: 1.78 -->
<!--
-Copyright (C) 2006-2024 Free Software Foundation, Inc.
+Copyright (C) 2006-2025 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
to <a href="mailto:%%EMAIL%%"><%%EMAIL%%></a>.</p>
</div>
-<p>Copyright © 2023 Free Software Foundation, Inc.</p>
+<p>Copyright © 2023, 2025 Free Software Foundation, Inc.</p>
<p>This page is licensed under a <a rel="license"
href="https://creativecommons.org/licenses/by-nd/3.0/us/">Creative
# Convert git log output to ChangeLog format.
-# Copyright (C) 2008-2024 Free Software Foundation, Inc.
+# Copyright (C) 2008-2025 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
eval 'exec perl -wSx "$0" "$@"'
if 0;
-my $VERSION = '2024-07-04 10:56'; # UTC
+my $VERSION = '2024-07-17 02:20'; # UTC
# The definition above must lie within the first 8 lines in order
# for the Emacs time-stamp write hook (at end) to update it.
# If you change this file with Emacs, please let the write hook
# do its job. Otherwise, update this string manually.
+(my $copyright_year = $VERSION) =~ s/^(\d*)-.*$/$1/;
+
use strict;
use warnings;
use Getopt::Long;
# Change the author to be Paul. Note the escaped "@":
s,Jim .*>,Paul Eggert <eggert\\\@cs.ucla.edu>,
+Send patches and bug reports to <bug-gnulib\@gnu.org>.
EOF
}
exit $exit_code;
}
+sub print_version ()
+{
+ print "$ME version $VERSION\n";
+ print "Copyright (C) $copyright_year Free Software Foundation, Inc.\n";
+ print "License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>\n"
+ . "This is free software: you are free to change and redistribute it.\n"
+ . "There is NO WARRANTY, to the extent permitted by law.\n";
+ print "\n";
+ my $author = "Jim Meyering";
+ print "Written by $author.\n";
+}
+
# If the string $S is a well-behaved file name, simply return it.
# If it contains white space, quotes, etc., quote it, and return the new string.
sub shell_quote($)
GetOptions
(
help => sub { usage 0 },
- version => sub { print "$ME version $VERSION\n"; exit },
+ version => sub { print_version; exit },
'since=s' => \$since_date,
'until=s' => \$until_date,
'format=s' => \$format_string,
#!/bin/sh
# Sign files and upload them.
-scriptversion=2024-07-04.10; # UTC
+scriptversion=2024-12-09.08; # UTC
-# Copyright (C) 2004-2024 Free Software Foundation, Inc.
+# Copyright (C) 2004-2025 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
actual command line options. Use this to keep your defaults. Comments
(#) and empty lines in $conffile are allowed.
+You may need to set GPG_TTY=\$(tty) in your environment. See the
+gpg-agent man page.
+
<https://www.gnu.org/prep/maintain/html_node/Automated-FTP-Uploads.html>
gives some further background.
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2024-02-10.22}
+\def\texinfoversion{2024-11-04.20}
%
% Copyright 1985, 1986, 1988, 1990-2024 Free Software Foundation, Inc.
%
\let\setfilename=\comment
% @bye.
-\outer\def\bye{\chappager\pagelabels\tracingstats=1\ptexend}
+\outer\def\bye{%
+ \chappager\pagelabels
+ % possibly set in \printindex
+ \ifx\byeerror\relax\else\errmessage{\byeerror}\fi
+ \tracingstats=1\ptexend}
\message{pdf,}
% at the end of the line, or no break at all here.
% Changing the value of the penalty and/or the amount of stretch affects how
% preferable one choice is over the other.
+% Check test cases in doc/texinfo-tex-test.texi before making any changes.
\def\urefallowbreak{%
\penalty0\relax
- \hskip 0pt plus 2 em\relax
+ \hskip 0pt plus 3 em\relax
\penalty1000\relax
- \hskip 0pt plus -2 em\relax
+ \hskip 0pt plus -3 em\relax
}
\urefbreakstyle after
\closein 1
\endgroup}
+% Checked in @bye
+\let\byeerror\relax
+
% If the index file starts with a backslash, forgo reading the index
% file altogether. If somebody upgrades texinfo.tex they may still have
% old index files using \ as the escape character. Reading this would
\ifflagclear{txiindexescapeisbackslash}{%
\uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
\ifflagclear{txiskipindexfileswithbackslash}{%
-\errmessage{%
+ % Delay the error message until the very end to give a chance
+ % for the whole index to be output as input for texindex.
+ \global\def\byeerror{%
ERROR: A sorted index file in an obsolete format was skipped.
To fix this problem, please upgrade your version of 'texi2dvi'
or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
% then page number (#2) flushed to the right margin. It is used for index
% and table of contents entries. The paragraph is indented by \leftskip.
-%
+% If \tocnodetarget is set, link text to the referenced node.
\def\entry{%
\begingroup
%
\global\setbox\boxA=\hbox\bgroup
\ifpdforxetex
\iflinkentrytext
- \pdflinkpage{#1}{\unhbox\boxA}%
+ \ifx\tocnodetarget\empty
+ \unhbox\boxA
+ \else
+ \startxreflink{\tocnodetarget}{}%
+ \unhbox\boxA
+ \endlink
+ \fi
\else
\unhbox\boxA
\fi
%
\null\nobreak\indexdotfill % Have leaders before the page number.
%
+ \hskip\skip\thinshrinkable
\ifpdforxetex
- \pdfgettoks#1.%
- \hskip\skip\thinshrinkable\the\toksA
+ \ifx\tocnodetarget\empty
+ \pdfgettoks#1.%
+ \the\toksA
+ \else
+ % Should just be a single page number in toc
+ \startxreflink{\tocnodetarget}{}%
+ #1\endlink
+ \fi
\else
- \hskip\skip\thinshrinkable #1%
+ #1%
\fi
\fi
\egroup % end \boxA
\vskip 0pt plus 5\baselineskip
\penalty-300
\vskip 0pt plus -5\baselineskip
- \dochapentry{#1}{\numeralbox}{}%
+ \dochapentry{#1}{\numeralbox}{#3}{}%
}
%
% Parts, in the short toc.
% Chapters, in the main contents.
\def\numchapentry#1#2#3#4{%
\retrievesecnowidth\secnowidthchap{#2}%
- \dochapentry{#1}{#2}{#4}%
+ \dochapentry{#1}{#2}{#3}{#4}%
}
% Chapters, in the short toc.
\def\shortchapentry#1#2#3#4{%
- \tocentry{#1}{\shortchaplabel{#2}}{#4}%
+ \tocentry{#1}{\shortchaplabel{#2}}{#3}{#4}%
}
% Appendices, in the main contents.
%
\def\appentry#1#2#3#4{%
\retrievesecnowidth\secnowidthchap{#2}%
- \dochapentry{\appendixbox{#2}\hskip.7em#1}{}{#4}%
+ \dochapentry{\appendixbox{#2}\hskip.7em#1}{}{#3}{#4}%
}
% Unnumbered chapters.
-\def\unnchapentry#1#2#3#4{\dochapentry{#1}{}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{}{#4}}
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{}{#3}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{}{#3}{#4}}
% Sections.
-\def\numsecentry#1#2#3#4{\dosecentry{#1}{#2}{#4}}
-
\def\numsecentry#1#2#3#4{%
\retrievesecnowidth\secnowidthsec{#2}%
- \dosecentry{#1}{#2}{#4}%
+ \dosecentry{#1}{#2}{#3}{#4}%
}
\let\appsecentry=\numsecentry
\def\unnsecentry#1#2#3#4{%
\retrievesecnowidth\secnowidthsec{#2}%
- \dosecentry{#1}{}{#4}%
+ \dosecentry{#1}{}{#3}{#4}%
}
% Subsections.
\def\numsubsecentry#1#2#3#4{%
\retrievesecnowidth\secnowidthssec{#2}%
- \dosubsecentry{#1}{#2}{#4}%
+ \dosubsecentry{#1}{#2}{#3}{#4}%
}
\let\appsubsecentry=\numsubsecentry
\def\unnsubsecentry#1#2#3#4{%
\retrievesecnowidth\secnowidthssec{#2}%
- \dosubsecentry{#1}{}{#4}%
+ \dosubsecentry{#1}{}{#3}{#4}%
}
% And subsubsections.
-\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#2}{#4}}
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#2}{#3}{#4}}
\let\appsubsubsecentry=\numsubsubsecentry
-\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{}{#4}}
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{}{#3}{#4}}
% This parameter controls the indentation of the various levels.
% Same as \defaultparindent.
\newdimen\tocindent \tocindent = 15pt
% Now for the actual typesetting. In all these, #1 is the text, #2 is
-% a section number if present, and #3 is the page number.
+% a section number if present, #3 is the node, and #4 is the page number.
%
% If the toc has to be broken over pages, we want it to be at chapters
% if at all possible; hence the \penalty.
-\def\dochapentry#1#2#3{%
+\def\dochapentry#1#2#3#4{%
\penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
\begingroup
% Move the page numbers slightly to the right
\advance\entryrightmargin by -0.05em
\chapentryfonts
\extrasecnoskip=0.4em % separate chapter number more
- \tocentry{#1}{#2}{#3}%
+ \tocentry{#1}{#2}{#3}{#4}%
\endgroup
\nobreak\vskip .25\baselineskip plus.1\baselineskip
}
-\def\dosecentry#1#2#3{\begingroup
+\def\dosecentry#1#2#3#4{\begingroup
\secnowidth=\secnowidthchap
\secentryfonts \leftskip=\tocindent
- \tocentry{#1}{#2}{#3}%
+ \tocentry{#1}{#2}{#3}{#4}%
\endgroup}
-\def\dosubsecentry#1#2#3{\begingroup
+\def\dosubsecentry#1#2#3#4{\begingroup
\secnowidth=\secnowidthsec
\subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{#2}{#3}%
+ \tocentry{#1}{#2}{#3}{#4}%
\endgroup}
-\def\dosubsubsecentry#1#2#3{\begingroup
+\def\dosubsubsecentry#1#2#3#4{\begingroup
\secnowidth=\secnowidthssec
\subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{#2}{#3}%
+ \tocentry{#1}{#2}{#3}{#4}%
\endgroup}
% Used for the maximum width of a section number so we can align
\newdimen\extrasecnoskip
\extrasecnoskip=0pt
-% \tocentry{TITLE}{SEC NO}{PAGE}
+\let\tocnodetarget\empty
+
+% \tocentry{TITLE}{SEC NO}{NODE}{PAGE}
%
-\def\tocentry#1#2#3{%
+\def\tocentry#1#2#3#4{%
+ \def\tocnodetarget{#3}%
\def\secno{#2}%
\ifx\empty\secno
- \entry{#1}{#3}%
+ \entry{#1}{#4}%
\else
\ifdim 0pt=\secnowidth
\setbox0=\hbox{#2\hskip\labelspace\hskip\extrasecnoskip}%
#2\hskip\labelspace\hskip\extrasecnoskip\hfill}%
\fi
\entrycontskip=\wd0
- \entry{\box0 #1}{#3}%
+ \entry{\box0 #1}{#4}%
\fi
}
\newdimen\labelspace
\catcode"#1=\other
}
+% Suppress ligature creation from adjacent characters.
+\ifx\luatexversion\thisisundefined
+ \def\nolig{{}}
+\else
+ % Braces do not suppress ligature creation in LuaTeX, e.g. in of{}fice
+ % to suppress the "ff" ligature. Using a kern appears to be the only
+ % workaround.
+ \def\nolig{\kern0pt{}}
+\fi
+
% https://en.wikipedia.org/wiki/Plane_(Unicode)#Basic_M
% U+0000..U+007F = https://en.wikipedia.org/wiki/Basic_Latin_(Unicode_block)
% U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
% Punctuation
\DeclareUnicodeCharacter{2013}{--}%
\DeclareUnicodeCharacter{2014}{---}%
- \DeclareUnicodeCharacter{2018}{\quoteleft{}}%
- \DeclareUnicodeCharacter{2019}{\quoteright{}}%
+ \DeclareUnicodeCharacter{2018}{\quoteleft\nolig}%
+ \DeclareUnicodeCharacter{2019}{\quoteright\nolig}%
\DeclareUnicodeCharacter{201A}{\quotesinglbase{}}%
\DeclareUnicodeCharacter{201C}{\quotedblleft{}}%
\DeclareUnicodeCharacter{201D}{\quotedblright{}}%
\DeclareUnicodeCharacter{2287}{\ensuremath\supseteq}%
%
\DeclareUnicodeCharacter{2016}{\ensuremath\Vert}%
- \DeclareUnicodeCharacter{2032}{\ensuremath\prime}%
+ \DeclareUnicodeCharacter{2032}{\ensuremath{^\prime}}%
\DeclareUnicodeCharacter{210F}{\ensuremath\hbar}%
\DeclareUnicodeCharacter{2111}{\ensuremath\Im}%
\DeclareUnicodeCharacter{2113}{\ensuremath\ell}%
# Update an FSF copyright year list to include the current year.
-# Copyright (C) 2009-2024 Free Software Foundation, Inc.
+# Copyright (C) 2009-2025 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# Each file's copyright statement must be formatted correctly in
# order to be recognized. For example, each of these is fine:
#
-# Copyright @copyright{} 1990-2005, 2007-2009 Free Software
-# Foundation, Inc.
+# Copyright @copyright{} 1990-2005, 2007-2009, 2025 Free Software Foundation,
+# Inc.
#
# # Copyright (C) 1990-2005, 2007-2009 Free Software
# # Foundation, Inc.
eval 'exec perl -wSx -0777 -pi "$0" "$@"'
if 0;
-my $VERSION = '2024-07-04.10:56'; # UTC
+my $VERSION = '2025-01-01.07:36'; # UTC
# The definition above must lie within the first 8 lines in order
# for the Emacs time-stamp write hook (at end) to update it.
# If you change this file with Emacs, please let the write hook
else
{
my $ndash = ($ARGV =~ /\.tex(i(nfo)?)?$/ ? "--"
- : $ARGV =~ /\.(\d[a-z]*|man)$/ ? "\\(en"
+ : $ARGV =~ /\.(\d[a-z]*|man)(\.in)?$/ && $ARGV !~ /ChangeLog\./ ? "\\(en"
: "-");
$stmt =~
projects / thirdparty / automake.git / commitdiff
