arm64: zynqmp: Remove SOM *u-boot.dtsi

Disable mmc from u-boot.dtsi file because it was there only for kv260
board. With kr260 this is not needed because we will switch to full DT per
board with SD/EMMC there too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
deleted file mode 100644 (file)
index 467df9f..0000000
--- a/arch/arm/dts/zynqmp-sm-k26-revA-u-boot.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * dts file for Xilinx ZynqMP K26/KV260 SD wiring
- *
- * (C) Copyright 2020 - 2021, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- */
-
-/* SD0 only supports 3.3V, no level shifter */
-&sdhci1 { /* on CC - MIO 39 - 51 */
-       status = "okay";
-       no-1-8-v;
-       disable-wp;
-       broken-cd;
-       xlnx,mio-bank = <1>;
-       /* Do not run SD in HS mode from bootloader */
-       sdhci-caps-mask = <0 0x200000>;
-       sdhci-caps = <0 0>;
-       max-frequency = <19000000>;
-};

diff --git a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi b/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
deleted file mode 100644 (file)
index 34e6328..0000000
--- a/arch/arm/dts/zynqmp-smk-k26-revA-u-boot.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * dts file for Xilinx ZynqMP Z2-VSOM
- *
- * (C) Copyright 2020 - 2021, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- */
-
-/* SD0 only supports 3.3V, no level shifter */
-&sdhci1 { /* FIXME - on CC - MIO 39 - 51 */
-       status = "okay";
-       no-1-8-v;
-       disable-wp;
-       broken-cd;
-       xlnx,mio-bank = <1>;
-       /* Do not run SD in HS mode from bootloader */
-       sdhci-caps-mask = <0 0x200000>;
-       sdhci-caps = <0 0>;
-       max-frequency = <19000000>;
-};