--- /dev/null
+From 9bfa7b36343c7d84370bc61c9ed774635b05e4eb Mon Sep 17 00:00:00 2001
+From: Marios Levogiannis <marios.levogiannis@gmail.com>
+Date: Mon, 30 May 2022 10:41:31 +0300
+Subject: ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
+
+From: Marios Levogiannis <marios.levogiannis@gmail.com>
+
+commit 9bfa7b36343c7d84370bc61c9ed774635b05e4eb upstream.
+
+Set microphone pins 0x18 (rear) and 0x19 (front) to VREF_50 to fix the
+microphone noise on ASUS TUF B550M-PLUS which uses the ALCS1200A codec.
+The initial value was VREF_80.
+
+The same issue is also present on Windows using both the default Windows
+driver and all tested Realtek drivers before version 6.0.9049.1. Comparing
+Realtek driver 6.0.9049.1 (the first one without the microphone noise) to
+Realtek driver 6.0.9047.1 (the last one with the microphone noise)
+revealed that the fix is the result of setting pins 0x18 and 0x19 to
+VREF_50.
+
+This fix may also work for other boards that have been reported to have
+the same microphone issue and use the ALC1150 and ALCS1200A codecs, since
+these codecs are similar and the fix in the Realtek driver on Windows is
+common for both. However, it is currently enabled only for ASUS TUF
+B550M-PLUS as this is the only board that could be tested.
+
+Signed-off-by: Marios Levogiannis <marios.levogiannis@gmail.com>
+Cc: <stable@vger.kernel.org>
+Link: https://lore.kernel.org/r/20220530074131.12258-1-marios.levogiannis@gmail.com
+Signed-off-by: Takashi Iwai <tiwai@suse.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ sound/pci/hda/patch_realtek.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/sound/pci/hda/patch_realtek.c
++++ b/sound/pci/hda/patch_realtek.c
+@@ -1932,6 +1932,7 @@ enum {
+ ALC1220_FIXUP_CLEVO_PB51ED_PINS,
+ ALC887_FIXUP_ASUS_AUDIO,
+ ALC887_FIXUP_ASUS_HMIC,
++ ALCS1200A_FIXUP_MIC_VREF,
+ };
+
+ static void alc889_fixup_coef(struct hda_codec *codec,
+@@ -2477,6 +2478,14 @@ static const struct hda_fixup alc882_fix
+ .chained = true,
+ .chain_id = ALC887_FIXUP_ASUS_AUDIO,
+ },
++ [ALCS1200A_FIXUP_MIC_VREF] = {
++ .type = HDA_FIXUP_PINCTLS,
++ .v.pins = (const struct hda_pintbl[]) {
++ { 0x18, PIN_VREF50 }, /* rear mic */
++ { 0x19, PIN_VREF50 }, /* front mic */
++ {}
++ }
++ },
+ };
+
+ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
+@@ -2514,6 +2523,7 @@ static const struct snd_pci_quirk alc882
+ SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601),
+ SND_PCI_QUIRK(0x1043, 0x84bc, "ASUS ET2700", ALC887_FIXUP_ASUS_BASS),
+ SND_PCI_QUIRK(0x1043, 0x8691, "ASUS ROG Ranger VIII", ALC882_FIXUP_GPIO3),
++ SND_PCI_QUIRK(0x1043, 0x8797, "ASUS TUF B550M-PLUS", ALCS1200A_FIXUP_MIC_VREF),
+ SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
+ SND_PCI_QUIRK(0x104d, 0x9044, "Sony VAIO AiO", ALC882_FIXUP_NO_PRIMARY_HP),
+ SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
binfmt_flat-do-not-stop-relocating-got-entries-prematurely-on-riscv.patch
+alsa-hda-realtek-fix-microphone-noise-on-asus-tuf-b550m-plus.patch
+usb-serial-option-add-quectel-bg95-modem.patch
+usb-new-quirk-for-dell-gen-2-devices.patch
+usb-core-hcd-add-support-for-deferring-roothub-registration.patch
--- /dev/null
+From a44623d9279086c89f631201d993aa332f7c9e66 Mon Sep 17 00:00:00 2001
+From: Kishon Vijay Abraham I <kishon@ti.com>
+Date: Tue, 10 May 2022 14:46:29 +0530
+Subject: usb: core: hcd: Add support for deferring roothub registration
+
+From: Kishon Vijay Abraham I <kishon@ti.com>
+
+commit a44623d9279086c89f631201d993aa332f7c9e66 upstream.
+
+It has been observed with certain PCIe USB cards (like Inateck connected
+to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
+registered, port status change is handled even before xHC is running
+leading to cold plug USB devices not detected. For such cases, registering
+both the root hubs along with the second HCD is required. Add support for
+deferring roothub registration in usb_add_hcd(), so that both primary and
+secondary roothubs are registered along with the second HCD.
+
+This patch has been added and reverted earier as it triggered a race
+in usb device enumeration.
+That race is now fixed in 5.16-rc3, and in stable back to 5.4
+commit 6cca13de26ee ("usb: hub: Fix locking issues with address0_mutex")
+commit 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0
+race")
+
+CC: stable@vger.kernel.org # 5.4+
+Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
+Tested-by: Chris Chiu <chris.chiu@canonical.com>
+Acked-by: Alan Stern <stern@rowland.harvard.edu>
+Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
+Link: https://lore.kernel.org/r/20220510091630.16564-2-kishon@ti.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/hcd.c | 29 +++++++++++++++++++++++------
+ include/linux/usb/hcd.h | 2 ++
+ 2 files changed, 25 insertions(+), 6 deletions(-)
+
+--- a/drivers/usb/core/hcd.c
++++ b/drivers/usb/core/hcd.c
+@@ -2657,6 +2657,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
+ {
+ int retval;
+ struct usb_device *rhdev;
++ struct usb_hcd *shared_hcd;
+
+ if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
+ hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
+@@ -2813,13 +2814,26 @@ int usb_add_hcd(struct usb_hcd *hcd,
+ goto err_hcd_driver_start;
+ }
+
++ /* starting here, usbcore will pay attention to the shared HCD roothub */
++ shared_hcd = hcd->shared_hcd;
++ if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) {
++ retval = register_root_hub(shared_hcd);
++ if (retval != 0)
++ goto err_register_root_hub;
++
++ if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd))
++ usb_hcd_poll_rh_status(shared_hcd);
++ }
++
+ /* starting here, usbcore will pay attention to this root hub */
+- retval = register_root_hub(hcd);
+- if (retval != 0)
+- goto err_register_root_hub;
++ if (!HCD_DEFER_RH_REGISTER(hcd)) {
++ retval = register_root_hub(hcd);
++ if (retval != 0)
++ goto err_register_root_hub;
+
+- if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
+- usb_hcd_poll_rh_status(hcd);
++ if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
++ usb_hcd_poll_rh_status(hcd);
++ }
+
+ return retval;
+
+@@ -2862,6 +2876,7 @@ EXPORT_SYMBOL_GPL(usb_add_hcd);
+ void usb_remove_hcd(struct usb_hcd *hcd)
+ {
+ struct usb_device *rhdev = hcd->self.root_hub;
++ bool rh_registered;
+
+ dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
+
+@@ -2872,6 +2887,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
+
+ dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
+ spin_lock_irq (&hcd_root_hub_lock);
++ rh_registered = hcd->rh_registered;
+ hcd->rh_registered = 0;
+ spin_unlock_irq (&hcd_root_hub_lock);
+
+@@ -2881,7 +2897,8 @@ void usb_remove_hcd(struct usb_hcd *hcd)
+ cancel_work_sync(&hcd->died_work);
+
+ mutex_lock(&usb_bus_idr_lock);
+- usb_disconnect(&rhdev); /* Sets rhdev to NULL */
++ if (rh_registered)
++ usb_disconnect(&rhdev); /* Sets rhdev to NULL */
+ mutex_unlock(&usb_bus_idr_lock);
+
+ /*
+--- a/include/linux/usb/hcd.h
++++ b/include/linux/usb/hcd.h
+@@ -124,6 +124,7 @@ struct usb_hcd {
+ #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
+ #define HCD_FLAG_DEAD 6 /* controller has died? */
+ #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
++#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */
+
+ /* The flags can be tested using these macros; they are likely to
+ * be slightly faster than test_bit().
+@@ -134,6 +135,7 @@ struct usb_hcd {
+ #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+ #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+ #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
++#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER))
+
+ /*
+ * Specifies if interfaces are authorized by default
--- /dev/null
+From 97fa5887cf283bb75ffff5f6b2c0e71794c02400 Mon Sep 17 00:00:00 2001
+From: Monish Kumar R <monish.kumar.r@intel.com>
+Date: Fri, 20 May 2022 18:30:44 +0530
+Subject: USB: new quirk for Dell Gen 2 devices
+
+From: Monish Kumar R <monish.kumar.r@intel.com>
+
+commit 97fa5887cf283bb75ffff5f6b2c0e71794c02400 upstream.
+
+Add USB_QUIRK_NO_LPM and USB_QUIRK_RESET_RESUME quirks for Dell usb gen
+2 device to not fail during enumeration.
+
+Found this bug on own testing
+
+Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com>
+Cc: stable <stable@vger.kernel.org>
+Link: https://lore.kernel.org/r/20220520130044.17303-1-monish.kumar.r@intel.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/core/quirks.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/core/quirks.c
++++ b/drivers/usb/core/quirks.c
+@@ -511,6 +511,9 @@ static const struct usb_device_id usb_qu
+ /* DJI CineSSD */
+ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
++ /* DELL USB GEN2 */
++ { USB_DEVICE(0x413c, 0xb062), .driver_info = USB_QUIRK_NO_LPM | USB_QUIRK_RESET_RESUME },
++
+ /* VCOM device */
+ { USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
--- /dev/null
+From 33b7af2f459df453feb0d44628d820c47fefe7a8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Carl=20Yin=28=E6=AE=B7=E5=BC=A0=E6=88=90=29?=
+ <carl.yin@quectel.com>
+Date: Thu, 19 May 2022 02:34:43 +0000
+Subject: USB: serial: option: add Quectel BG95 modem
+
+From: Carl Yin(殷张成) <carl.yin@quectel.com>
+
+commit 33b7af2f459df453feb0d44628d820c47fefe7a8 upstream.
+
+The BG95 modem has 3 USB configurations that are configurable via the AT
+command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem
+enumerate with the following interfaces, respectively:
+
+"modem": Diag + GNSS + Modem + Modem
+"ecm" : Diag + GNSS + Modem + ECM
+"rmnet": Diag + GNSS + Modem + QMI
+ Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE)
+
+A detailed description of the USB configuration for each mode follows:
+
++QCFGEXT: "usbnet","modem"
+--------------------------
+T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=2c7c ProdID=0700 Rev= 0.00
+S: Manufacturer=Quectel, Incorporated
+S: Product=Quectel LPWA Module
+S: SerialNumber=884328a2
+C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
+I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
+E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
++QCFGEXT: "usbnet","ecm"
+------------------------
+T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
+P: Vendor=2c7c ProdID=0700 Rev= 0.00
+S: Manufacturer=Quectel, Incorporated
+S: Product=Quectel LPWA Module
+S: SerialNumber=884328a2
+C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
+A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
+I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
+E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
++QCFGEXT: "usbnet","rmnet"
+--------------------------
+T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
+D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+P: Vendor=2c7c ProdID=0700 Rev= 0.00
+S: Manufacturer=Quectel, Incorporated
+S: Product=Quectel LPWA Module
+S: SerialNumber=884328a2
+C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
+I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
+E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
+E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
+E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+
+Signed-off-by: Carl Yin <carl.yin@quectel.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -1137,6 +1137,8 @@ static const struct usb_device_id option
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) }, /* EM160R-GL */
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
++ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */
++ .driver_info = RSVD(3) | ZLP },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
projects / thirdparty / kernel / stable-queue.git / commitdiff
