dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm

Apparently there was some confusion regarding milliohm vs. megaohm.
(m/M). Use microohms to be able to properly specify the charger
resistor like other drivers do. This is not used yet by mainline code
yet. Specify a current sense resistor in milliohms range rather then
megaohms range in the examples.

CC: sre@kernel.org
Reported-by: Matti Vaittinen <mazziesaccount@gmail.com>
Closes: https://lore.kernel.org/imx/6dcd724a-a55c-4cba-a45b-21e76b1973b0@gmail.com/T/#mf590875a9f4d3955cd1041d7196ff0c65c0a7e9d
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 1af5332fcf7c ("dt-bindings: mfd: Document ROHM BD71828 bindings")
Link: https://lore.kernel.org/r/20241111102701.358133-1-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index fa17686a64f79f94aa66c5840038671a1c8e57be..09e7d68e92bf3d91bbbdf2e1b6a942e87b5fe7a1 100644 (file)
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -55,14 +55,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
+    default: 30000
     description: |
       BD71827 and BD71828 have SAR ADC for measuring charging currents.
       External sense resistor (RSENSE in data sheet) should be used. If some
-      other but 30MOhm resistor is used the resistance value should be given
-      here in Ohms.
+      other but 30mOhm resistor is used the resistance value should be given
+      here in microohms.
 
   regulators:
     $ref: /schemas/regulator/rohm,bd71828-regulator.yaml
@@ -114,7 +115,7 @@ examples:
             #gpio-cells = <2>;
             gpio-reserved-ranges = <0 1>, <2 1>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: BUCK1 {