The gpiolib-acpi.c is huge enough even without DMI quirks.
Move them to a separate file for a better maintenance.
No functional change intended.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
obj-$(CONFIG_GPIO_CDEV) += gpiolib-cdev.o
obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o
obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
+gpiolib-acpi-y := gpiolib-acpi-core.o gpiolib-acpi-quirks.o
obj-$(CONFIG_GPIOLIB) += gpiolib-swnode.o
# Device drivers. Generally keep list sorted alphabetically
#include "gpiolib.h"
#include "gpiolib-acpi.h"
-static int run_edge_events_on_boot = -1;
-module_param(run_edge_events_on_boot, int, 0444);
-MODULE_PARM_DESC(run_edge_events_on_boot,
- "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
-
-static char *ignore_wake;
-module_param(ignore_wake, charp, 0444);
-MODULE_PARM_DESC(ignore_wake,
- "controller@pin combos on which to ignore the ACPI wake flag "
- "ignore_wake=controller@pin[,controller@pin[,...]]");
-
-static char *ignore_interrupt;
-module_param(ignore_interrupt, charp, 0444);
-MODULE_PARM_DESC(ignore_interrupt,
- "controller@pin combos on which to ignore interrupt "
- "ignore_interrupt=controller@pin[,controller@pin[,...]]");
-
-struct acpi_gpiolib_dmi_quirk {
- bool no_edge_events_on_boot;
- char *ignore_wake;
- char *ignore_interrupt;
-};
-
/**
* struct acpi_gpio_event - ACPI GPIO event handler data
*
unsigned int quirks;
};
-/*
- * For GPIO chips which call acpi_gpiochip_request_interrupts() before late_init
- * (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a
- * late_initcall_sync() handler, so that other builtin drivers can register their
- * OpRegions before the event handlers can run. This list contains GPIO chips
- * for which the acpi_gpiochip_request_irqs() call has been deferred.
- */
-static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock);
-static LIST_HEAD(acpi_gpio_deferred_req_irqs_list);
-static bool acpi_gpio_deferred_req_irqs_done;
-
static int acpi_gpiochip_find(struct gpio_chip *gc, const void *data)
{
/* First check the actual GPIO device */
return desc;
}
-bool acpi_gpio_add_to_deferred_list(struct list_head *list)
-{
- bool defer;
-
- mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
- defer = !acpi_gpio_deferred_req_irqs_done;
- if (defer)
- list_add(list, &acpi_gpio_deferred_req_irqs_list);
- mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
-
- return defer;
-}
-
-void acpi_gpio_remove_from_deferred_list(struct list_head *list)
-{
- mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
- if (!list_empty(list))
- list_del_init(list);
- mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
-}
-
-int acpi_gpio_need_run_edge_events_on_boot(void)
-{
- return run_edge_events_on_boot;
-}
-
-bool acpi_gpio_in_ignore_list(enum acpi_gpio_ignore_list list, const char *controller_in,
- unsigned int pin_in)
-{
- const char *ignore_list, *controller, *pin_str;
- unsigned int pin;
- char *endp;
- int len;
-
- switch (list) {
- case ACPI_GPIO_IGNORE_WAKE:
- ignore_list = ignore_wake;
- break;
- case ACPI_GPIO_IGNORE_INTERRUPT:
- ignore_list = ignore_interrupt;
- break;
- default:
- return false;
- }
-
- controller = ignore_list;
- while (controller) {
- pin_str = strchr(controller, '@');
- if (!pin_str)
- goto err;
-
- len = pin_str - controller;
- if (len == strlen(controller_in) &&
- strncmp(controller, controller_in, len) == 0) {
- pin = simple_strtoul(pin_str + 1, &endp, 10);
- if (*endp != 0 && *endp != ',')
- goto err;
-
- if (pin == pin_in)
- return true;
- }
-
- controller = strchr(controller, ',');
- if (controller)
- controller++;
- }
-
- return false;
-err:
- pr_err_once("Error: Invalid value for gpiolib_acpi.ignore_...: %s\n", ignore_list);
- return false;
-}
-
static bool acpi_gpio_irq_is_wake(struct device *parent,
const struct acpi_resource_gpio *agpio)
{
}
return count ? count : -ENOENT;
}
-
-/* Run deferred acpi_gpiochip_request_irqs() */
-static int __init acpi_gpio_handle_deferred_request_irqs(void)
-{
- mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
- acpi_gpio_process_deferred_list(&acpi_gpio_deferred_req_irqs_list);
- acpi_gpio_deferred_req_irqs_done = true;
- mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
-
- return 0;
-}
-/* We must use _sync so that this runs after the first deferred_probe run */
-late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
-
-static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
- {
- /*
- * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
- * a non existing micro-USB-B connector which puts the HDMI
- * DDC pins in GPIO mode, breaking HDMI support.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .no_edge_events_on_boot = true,
- },
- },
- {
- /*
- * The Terra Pad 1061 has a micro-USB-B id-pin handler, which
- * instead of controlling the actual micro-USB-B turns the 5V
- * boost for its USB-A connector off. The actual micro-USB-B
- * connector is wired for charging only.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
- DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .no_edge_events_on_boot = true,
- },
- },
- {
- /*
- * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an
- * external embedded-controller connected via I2C + an ACPI GPIO
- * event handler on INT33FFC:02 pin 12, causing spurious wakeups.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "INT33FC:02@12",
- },
- },
- {
- /*
- * HP X2 10 models with Cherry Trail SoC + TI PMIC use an
- * external embedded-controller connected via I2C + an ACPI GPIO
- * event handler on INT33FF:01 pin 0, causing spurious wakeups.
- * When suspending by closing the LID, the power to the USB
- * keyboard is turned off, causing INT0002 ACPI events to
- * trigger once the XHCI controller notices the keyboard is
- * gone. So INT0002 events cause spurious wakeups too. Ignoring
- * EC wakes breaks wakeup when opening the lid, the user needs
- * to press the power-button to wakeup the system. The
- * alternative is suspend simply not working, which is worse.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "INT33FF:01@0,INT0002:00@2",
- },
- },
- {
- /*
- * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an
- * external embedded-controller connected via I2C + an ACPI GPIO
- * event handler on INT33FC:02 pin 28, causing spurious wakeups.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
- DMI_MATCH(DMI_BOARD_NAME, "815D"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "INT33FC:02@28",
- },
- },
- {
- /*
- * HP X2 10 models with Cherry Trail SoC + AXP288 PMIC use an
- * external embedded-controller connected via I2C + an ACPI GPIO
- * event handler on INT33FF:01 pin 0, causing spurious wakeups.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
- DMI_MATCH(DMI_BOARD_NAME, "813E"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "INT33FF:01@0",
- },
- },
- {
- /*
- * Interrupt storm caused from edge triggered floating pin
- * Found in BIOS UX325UAZ.300
- * https://bugzilla.kernel.org/show_bug.cgi?id=216208
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UAZ_UM325UAZ"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_interrupt = "AMDI0030:00@18",
- },
- },
- {
- /*
- * Spurious wakeups from TP_ATTN# pin
- * Found in BIOS 1.7.8
- * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
- */
- .matches = {
- DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "ELAN0415:00@9",
- },
- },
- {
- /*
- * Spurious wakeups from TP_ATTN# pin
- * Found in BIOS 1.7.8
- * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
- */
- .matches = {
- DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "ELAN0415:00@9",
- },
- },
- {
- /*
- * Spurious wakeups from TP_ATTN# pin
- * Found in BIOS 1.7.7
- */
- .matches = {
- DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "SYNA1202:00@16",
- },
- },
- {
- /*
- * On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
- * a "dolby" button. At the ACPI level an _AEI event-handler
- * is connected which sets an ACPI variable to 1 on both
- * edges. This variable can be polled + cleared to 0 using
- * WMI. But since the variable is set on both edges the WMI
- * interface is pretty useless even when polling.
- * So instead the x86-android-tablets code instantiates
- * a gpio-keys platform device for it.
- * Ignore the _AEI handler for the pin, so that it is not busy.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"),
- DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_interrupt = "INT33FC:00@3",
- },
- },
- {
- /*
- * Spurious wakeups from TP_ATTN# pin
- * Found in BIOS 0.35
- * https://gitlab.freedesktop.org/drm/amd/-/issues/3073
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "GPD"),
- DMI_MATCH(DMI_PRODUCT_NAME, "G1619-04"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_wake = "PNP0C50:00@8",
- },
- },
- {
- /*
- * Spurious wakeups from GPIO 11
- * Found in BIOS 1.04
- * https://gitlab.freedesktop.org/drm/amd/-/issues/3954
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- DMI_MATCH(DMI_PRODUCT_FAMILY, "Acer Nitro V 14"),
- },
- .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
- .ignore_interrupt = "AMDI0030:00@11",
- },
- },
- {} /* Terminating entry */
-};
-
-static int __init acpi_gpio_setup_params(void)
-{
- const struct acpi_gpiolib_dmi_quirk *quirk = NULL;
- const struct dmi_system_id *id;
-
- id = dmi_first_match(gpiolib_acpi_quirks);
- if (id)
- quirk = id->driver_data;
-
- if (run_edge_events_on_boot < 0) {
- if (quirk && quirk->no_edge_events_on_boot)
- run_edge_events_on_boot = 0;
- else
- run_edge_events_on_boot = 1;
- }
-
- if (ignore_wake == NULL && quirk && quirk->ignore_wake)
- ignore_wake = quirk->ignore_wake;
-
- if (ignore_interrupt == NULL && quirk && quirk->ignore_interrupt)
- ignore_interrupt = quirk->ignore_interrupt;
-
- return 0;
-}
-
-/* Directly after dmi_setup() which runs as core_initcall() */
-postcore_initcall(acpi_gpio_setup_params);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI quirks for GPIO ACPI helpers
+ *
+ * Author: Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/kstrtox.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/printk.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include "gpiolib-acpi.h"
+
+static int run_edge_events_on_boot = -1;
+module_param(run_edge_events_on_boot, int, 0444);
+MODULE_PARM_DESC(run_edge_events_on_boot,
+ "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
+
+static char *ignore_wake;
+module_param(ignore_wake, charp, 0444);
+MODULE_PARM_DESC(ignore_wake,
+ "controller@pin combos on which to ignore the ACPI wake flag "
+ "ignore_wake=controller@pin[,controller@pin[,...]]");
+
+static char *ignore_interrupt;
+module_param(ignore_interrupt, charp, 0444);
+MODULE_PARM_DESC(ignore_interrupt,
+ "controller@pin combos on which to ignore interrupt "
+ "ignore_interrupt=controller@pin[,controller@pin[,...]]");
+
+/*
+ * For GPIO chips which call acpi_gpiochip_request_interrupts() before late_init
+ * (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a
+ * late_initcall_sync() handler, so that other builtin drivers can register their
+ * OpRegions before the event handlers can run. This list contains GPIO chips
+ * for which the acpi_gpiochip_request_irqs() call has been deferred.
+ */
+static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock);
+static LIST_HEAD(acpi_gpio_deferred_req_irqs_list);
+static bool acpi_gpio_deferred_req_irqs_done;
+
+bool acpi_gpio_add_to_deferred_list(struct list_head *list)
+{
+ bool defer;
+
+ mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
+ defer = !acpi_gpio_deferred_req_irqs_done;
+ if (defer)
+ list_add(list, &acpi_gpio_deferred_req_irqs_list);
+ mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
+
+ return defer;
+}
+
+void acpi_gpio_remove_from_deferred_list(struct list_head *list)
+{
+ mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
+ if (!list_empty(list))
+ list_del_init(list);
+ mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
+}
+
+int acpi_gpio_need_run_edge_events_on_boot(void)
+{
+ return run_edge_events_on_boot;
+}
+
+bool acpi_gpio_in_ignore_list(enum acpi_gpio_ignore_list list,
+ const char *controller_in, unsigned int pin_in)
+{
+ const char *ignore_list, *controller, *pin_str;
+ unsigned int pin;
+ char *endp;
+ int len;
+
+ switch (list) {
+ case ACPI_GPIO_IGNORE_WAKE:
+ ignore_list = ignore_wake;
+ break;
+ case ACPI_GPIO_IGNORE_INTERRUPT:
+ ignore_list = ignore_interrupt;
+ break;
+ default:
+ return false;
+ }
+
+ controller = ignore_list;
+ while (controller) {
+ pin_str = strchr(controller, '@');
+ if (!pin_str)
+ goto err;
+
+ len = pin_str - controller;
+ if (len == strlen(controller_in) &&
+ strncmp(controller, controller_in, len) == 0) {
+ pin = simple_strtoul(pin_str + 1, &endp, 10);
+ if (*endp != 0 && *endp != ',')
+ goto err;
+
+ if (pin == pin_in)
+ return true;
+ }
+
+ controller = strchr(controller, ',');
+ if (controller)
+ controller++;
+ }
+
+ return false;
+err:
+ pr_err_once("Error: Invalid value for gpiolib_acpi.ignore_...: %s\n", ignore_list);
+ return false;
+}
+
+/* Run deferred acpi_gpiochip_request_irqs() */
+static int __init acpi_gpio_handle_deferred_request_irqs(void)
+{
+ mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
+ acpi_gpio_process_deferred_list(&acpi_gpio_deferred_req_irqs_list);
+ acpi_gpio_deferred_req_irqs_done = true;
+ mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
+
+ return 0;
+}
+/* We must use _sync so that this runs after the first deferred_probe run */
+late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
+
+struct acpi_gpiolib_dmi_quirk {
+ bool no_edge_events_on_boot;
+ char *ignore_wake;
+ char *ignore_interrupt;
+};
+
+static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
+ {
+ /*
+ * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
+ * a non existing micro-USB-B connector which puts the HDMI
+ * DDC pins in GPIO mode, breaking HDMI support.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .no_edge_events_on_boot = true,
+ },
+ },
+ {
+ /*
+ * The Terra Pad 1061 has a micro-USB-B id-pin handler, which
+ * instead of controlling the actual micro-USB-B turns the 5V
+ * boost for its USB-A connector off. The actual micro-USB-B
+ * connector is wired for charging only.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .no_edge_events_on_boot = true,
+ },
+ },
+ {
+ /*
+ * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FFC:02 pin 12, causing spurious wakeups.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FC:02@12",
+ },
+ },
+ {
+ /*
+ * HP X2 10 models with Cherry Trail SoC + TI PMIC use an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FF:01 pin 0, causing spurious wakeups.
+ * When suspending by closing the LID, the power to the USB
+ * keyboard is turned off, causing INT0002 ACPI events to
+ * trigger once the XHCI controller notices the keyboard is
+ * gone. So INT0002 events cause spurious wakeups too. Ignoring
+ * EC wakes breaks wakeup when opening the lid, the user needs
+ * to press the power-button to wakeup the system. The
+ * alternative is suspend simply not working, which is worse.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FF:01@0,INT0002:00@2",
+ },
+ },
+ {
+ /*
+ * HP X2 10 models with Bay Trail SoC + AXP288 PMIC use an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FC:02 pin 28, causing spurious wakeups.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+ DMI_MATCH(DMI_BOARD_NAME, "815D"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FC:02@28",
+ },
+ },
+ {
+ /*
+ * HP X2 10 models with Cherry Trail SoC + AXP288 PMIC use an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FF:01 pin 0, causing spurious wakeups.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+ DMI_MATCH(DMI_BOARD_NAME, "813E"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FF:01@0",
+ },
+ },
+ {
+ /*
+ * Interrupt storm caused from edge triggered floating pin
+ * Found in BIOS UX325UAZ.300
+ * https://bugzilla.kernel.org/show_bug.cgi?id=216208
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UAZ_UM325UAZ"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_interrupt = "AMDI0030:00@18",
+ },
+ },
+ {
+ /*
+ * Spurious wakeups from TP_ATTN# pin
+ * Found in BIOS 1.7.8
+ * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
+ */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "ELAN0415:00@9",
+ },
+ },
+ {
+ /*
+ * Spurious wakeups from TP_ATTN# pin
+ * Found in BIOS 1.7.8
+ * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
+ */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "ELAN0415:00@9",
+ },
+ },
+ {
+ /*
+ * Spurious wakeups from TP_ATTN# pin
+ * Found in BIOS 1.7.7
+ */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "SYNA1202:00@16",
+ },
+ },
+ {
+ /*
+ * On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
+ * a "dolby" button. At the ACPI level an _AEI event-handler
+ * is connected which sets an ACPI variable to 1 on both
+ * edges. This variable can be polled + cleared to 0 using
+ * WMI. But since the variable is set on both edges the WMI
+ * interface is pretty useless even when polling.
+ * So instead the x86-android-tablets code instantiates
+ * a gpio-keys platform device for it.
+ * Ignore the _AEI handler for the pin, so that it is not busy.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_interrupt = "INT33FC:00@3",
+ },
+ },
+ {
+ /*
+ * Spurious wakeups from TP_ATTN# pin
+ * Found in BIOS 0.35
+ * https://gitlab.freedesktop.org/drm/amd/-/issues/3073
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GPD"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "G1619-04"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "PNP0C50:00@8",
+ },
+ },
+ {
+ /*
+ * Spurious wakeups from GPIO 11
+ * Found in BIOS 1.04
+ * https://gitlab.freedesktop.org/drm/amd/-/issues/3954
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_FAMILY, "Acer Nitro V 14"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_interrupt = "AMDI0030:00@11",
+ },
+ },
+ {} /* Terminating entry */
+};
+
+static int __init acpi_gpio_setup_params(void)
+{
+ const struct acpi_gpiolib_dmi_quirk *quirk = NULL;
+ const struct dmi_system_id *id;
+
+ id = dmi_first_match(gpiolib_acpi_quirks);
+ if (id)
+ quirk = id->driver_data;
+
+ if (run_edge_events_on_boot < 0) {
+ if (quirk && quirk->no_edge_events_on_boot)
+ run_edge_events_on_boot = 0;
+ else
+ run_edge_events_on_boot = 1;
+ }
+
+ if (ignore_wake == NULL && quirk && quirk->ignore_wake)
+ ignore_wake = quirk->ignore_wake;
+
+ if (ignore_interrupt == NULL && quirk && quirk->ignore_interrupt)
+ ignore_interrupt = quirk->ignore_interrupt;
+
+ return 0;
+}
+
+/* Directly after dmi_setup() which runs as core_initcall() */
+postcore_initcall(acpi_gpio_setup_params);
projects / thirdparty / linux.git / commitdiff
