int cmd_mv(int argc, const char **argv, const char *prefix)
{
int i, flags, gitmodules_modified = 0;
- int verbose = 0, show_only = 0, force = 0, ignore_errors = 0;
+ int verbose = 0, show_only = 0, force = 0, ignore_errors = 0, ignore_sparse = 0;
struct option builtin_mv_options[] = {
OPT__VERBOSE(&verbose, N_("be verbose")),
OPT__DRY_RUN(&show_only, N_("dry run")),
OPT__FORCE(&force, N_("force move/rename even if target exists"),
PARSE_OPT_NOCOMPLETE),
OPT_BOOL('k', NULL, &ignore_errors, N_("skip move/rename errors")),
+ OPT_BOOL(0, "sparse", &ignore_sparse, N_("allow updating entries outside of the sparse-checkout cone")),
OPT_END(),
};
const char **source, **destination, **dest_path, **submodule_gitfile;
- enum update_mode { BOTH = 0, WORKING_DIRECTORY, INDEX } *modes;
+ enum update_mode { BOTH = 0, WORKING_DIRECTORY, INDEX, SPARSE } *modes;
struct stat st;
struct string_list src_for_dst = STRING_LIST_INIT_NODUP;
struct lock_file lock_file = LOCK_INIT;
struct cache_entry *ce;
+ struct string_list only_match_skip_worktree = STRING_LIST_INIT_NODUP;
git_config(git_default_config, NULL);
const char *src = source[i], *dst = destination[i];
int length, src_is_dir;
const char *bad = NULL;
+ int skip_sparse = 0;
if (show_only)
printf(_("Checking rename of '%s' to '%s'\n"), src, dst);
length = strlen(src);
- if (lstat(src, &st) < 0)
- bad = _("bad source");
- else if (!strncmp(src, dst, length) &&
+ if (lstat(src, &st) < 0) {
+ /* only error if existence is expected. */
+ if (modes[i] != SPARSE)
+ bad = _("bad source");
+ } else if (!strncmp(src, dst, length) &&
(dst[length] == 0 || dst[length] == '/')) {
bad = _("can not move directory into itself");
} else if ((src_is_dir = S_ISDIR(st.st_mode))
dst_len = strlen(dst);
for (j = 0; j < last - first; j++) {
- const char *path = active_cache[first + j]->name;
+ const struct cache_entry *ce = active_cache[first + j];
+ const char *path = ce->name;
source[argc + j] = path;
destination[argc + j] =
prefix_path(dst, dst_len, path + length + 1);
- modes[argc + j] = INDEX;
+ modes[argc + j] = ce_skip_worktree(ce) ? SPARSE : INDEX;
submodule_gitfile[argc + j] = NULL;
}
argc += last - first;
bad = _("multiple sources for the same target");
else if (is_dir_sep(dst[strlen(dst) - 1]))
bad = _("destination directory does not exist");
- else
+ else {
+ /*
+ * We check if the paths are in the sparse-checkout
+ * definition as a very final check, since that
+ * allows us to point the user to the --sparse
+ * option as a way to have a successful run.
+ */
+ if (!ignore_sparse &&
+ !path_in_sparse_checkout(src, &the_index)) {
+ string_list_append(&only_match_skip_worktree, src);
+ skip_sparse = 1;
+ }
+ if (!ignore_sparse &&
+ !path_in_sparse_checkout(dst, &the_index)) {
+ string_list_append(&only_match_skip_worktree, dst);
+ skip_sparse = 1;
+ }
+
+ if (skip_sparse)
+ goto remove_entry;
+
string_list_insert(&src_for_dst, dst);
+ }
if (!bad)
continue;
if (!ignore_errors)
die(_("%s, source=%s, destination=%s"),
bad, src, dst);
+remove_entry:
if (--argc > 0) {
int n = argc - i;
memmove(source + i, source + i + 1,
}
}
+ if (only_match_skip_worktree.nr) {
+ advise_on_updating_sparse_paths(&only_match_skip_worktree);
+ if (!ignore_errors)
+ return 1;
+ }
+
for (i = 0; i < argc; i++) {
const char *src = source[i], *dst = destination[i];
enum update_mode mode = modes[i];
printf(_("Renaming %s to %s\n"), src, dst);
if (show_only)
continue;
- if (mode != INDEX && rename(src, dst) < 0) {
+ if (mode != INDEX && mode != SPARSE && rename(src, dst) < 0) {
if (ignore_errors)
continue;
die_errno(_("renaming '%s' failed"), src);
--- /dev/null
+#!/bin/sh
+
+test_description='git mv in sparse working trees'
+
+. ./test-lib.sh
+
+test_expect_success 'setup' "
+ mkdir -p sub/dir sub/dir2 &&
+ touch a b c sub/d sub/dir/e sub/dir2/e &&
+ git add -A &&
+ git commit -m files &&
+
+ cat >sparse_error_header <<-EOF &&
+ The following pathspecs didn't match any eligible path, but they do match index
+ entries outside the current sparse checkout:
+ EOF
+
+ cat >sparse_hint <<-EOF
+ hint: Disable or modify the sparsity rules if you intend to update such entries.
+ hint: Disable this message with \"git config advice.updateSparsePath false\"
+ EOF
+"
+
+test_expect_success 'mv refuses to move sparse-to-sparse' '
+ test_when_finished rm -f e &&
+ git reset --hard &&
+ git sparse-checkout set a &&
+ touch b &&
+ test_must_fail git mv b e 2>stderr &&
+ cat sparse_error_header >expect &&
+ echo b >>expect &&
+ echo e >>expect &&
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+ git mv --sparse b e 2>stderr &&
+ test_must_be_empty stderr
+'
+
+test_expect_success 'mv refuses to move sparse-to-sparse, ignores failure' '
+ test_when_finished rm -f b c e &&
+ git reset --hard &&
+ git sparse-checkout set a &&
+
+ # tracked-to-untracked
+ touch b &&
+ git mv -k b e 2>stderr &&
+ test_path_exists b &&
+ test_path_is_missing e &&
+ cat sparse_error_header >expect &&
+ echo b >>expect &&
+ echo e >>expect &&
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+
+ git mv --sparse b e 2>stderr &&
+ test_must_be_empty stderr &&
+ test_path_is_missing b &&
+ test_path_exists e &&
+
+ # tracked-to-tracked
+ git reset --hard &&
+ touch b &&
+ git mv -k b c 2>stderr &&
+ test_path_exists b &&
+ test_path_is_missing c &&
+ cat sparse_error_header >expect &&
+ echo b >>expect &&
+ echo c >>expect &&
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+
+ git mv --sparse b c 2>stderr &&
+ test_must_be_empty stderr &&
+ test_path_is_missing b &&
+ test_path_exists c
+'
+
+test_expect_success 'mv refuses to move non-sparse-to-sparse' '
+ test_when_finished rm -f b c e &&
+ git reset --hard &&
+ git sparse-checkout set a &&
+
+ # tracked-to-untracked
+ test_must_fail git mv a e 2>stderr &&
+ test_path_exists a &&
+ test_path_is_missing e &&
+ cat sparse_error_header >expect &&
+ echo e >>expect &&
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+ git mv --sparse a e 2>stderr &&
+ test_must_be_empty stderr &&
+ test_path_is_missing a &&
+ test_path_exists e &&
+
+ # tracked-to-tracked
+ rm e &&
+ git reset --hard &&
+ test_must_fail git mv a c 2>stderr &&
+ test_path_exists a &&
+ test_path_is_missing c &&
+ cat sparse_error_header >expect &&
+ echo c >>expect &&
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+ git mv --sparse a c 2>stderr &&
+ test_must_be_empty stderr &&
+ test_path_is_missing a &&
+ test_path_exists c
+'
+
+test_expect_success 'mv refuses to move sparse-to-non-sparse' '
+ test_when_finished rm -f b c e &&
+ git reset --hard &&
+ git sparse-checkout set a e &&
+
+ # tracked-to-untracked
+ touch b &&
+ test_must_fail git mv b e 2>stderr &&
+ cat sparse_error_header >expect &&
+ echo b >>expect &&
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+ git mv --sparse b e 2>stderr &&
+ test_must_be_empty stderr
+'
+
+test_expect_success 'recursive mv refuses to move (possible) sparse' '
+ test_when_finished rm -rf b c e sub2 &&
+ git reset --hard &&
+ # Without cone mode, "sub" and "sub2" do not match
+ git sparse-checkout set sub/dir sub2/dir &&
+
+ # Add contained contents to ensure we avoid non-existence errors
+ mkdir sub/dir2 &&
+ touch sub/d sub/dir2/e &&
+
+ test_must_fail git mv sub sub2 2>stderr &&
+ cat sparse_error_header >expect &&
+ cat >>expect <<-\EOF &&
+ sub/d
+ sub2/d
+ sub/dir/e
+ sub2/dir/e
+ sub/dir2/e
+ sub2/dir2/e
+ EOF
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+ git mv --sparse sub sub2 2>stderr &&
+ test_must_be_empty stderr &&
+ git commit -m "moved sub to sub2" &&
+ git rev-parse HEAD~1:sub >expect &&
+ git rev-parse HEAD:sub2 >actual &&
+ test_cmp expect actual &&
+ git reset --hard HEAD~1
+'
+
+test_expect_success 'recursive mv refuses to move sparse' '
+ git reset --hard &&
+ # Use cone mode so "sub/" matches the sparse-checkout patterns
+ git sparse-checkout init --cone &&
+ git sparse-checkout set sub/dir sub2/dir &&
+
+ # Add contained contents to ensure we avoid non-existence errors
+ mkdir sub/dir2 &&
+ touch sub/dir2/e &&
+
+ test_must_fail git mv sub sub2 2>stderr &&
+ cat sparse_error_header >expect &&
+ cat >>expect <<-\EOF &&
+ sub/dir2/e
+ sub2/dir2/e
+ EOF
+ cat sparse_hint >>expect &&
+ test_cmp expect stderr &&
+ git mv --sparse sub sub2 2>stderr &&
+ test_must_be_empty stderr &&
+ git commit -m "moved sub to sub2" &&
+ git rev-parse HEAD~1:sub >expect &&
+ git rev-parse HEAD:sub2 >actual &&
+ test_cmp expect actual &&
+ git reset --hard HEAD~1
+'
+
+test_done
projects / thirdparty / git.git / commitdiff
