+++ /dev/null
-/*------------------------------------------------------------------------
- . smc9194.c
- . This is a driver for SMC's 9000 series of Ethernet cards.
- .
- . Copyright (C) 1996 by Erik Stahlman
- . This software may be used and distributed according to the terms
- . of the GNU General Public License, incorporated herein by reference.
- .
- . "Features" of the SMC chip:
- . 4608 byte packet memory. ( for the 91C92. Others have more )
- . EEPROM for configuration
- . AUI/TP selection ( mine has 10Base2/10BaseT select )
- .
- . Arguments:
- . io = for the base address
- . irq = for the IRQ
- . ifport = 0 for autodetect, 1 for TP, 2 for AUI ( or 10base2 )
- .
- . author:
- . Erik Stahlman ( erik@vt.edu )
- . contributors:
- . Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- .
- . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
- .
- . Sources:
- . o SMC databook
- . o skeleton.c by Donald Becker ( becker@scyld.com )
- . o ( a LOT of advice from Becker as well )
- .
- . History:
- . 12/07/95 Erik Stahlman written, got receive/xmit handled
- . 01/03/96 Erik Stahlman worked out some bugs, actually usable!!! :-)
- . 01/06/96 Erik Stahlman cleaned up some, better testing, etc
- . 01/29/96 Erik Stahlman fixed autoirq, added multicast
- . 02/01/96 Erik Stahlman 1. disabled all interrupts in smc_reset
- . 2. got rid of post-decrementing bug -- UGH.
- . 02/13/96 Erik Stahlman Tried to fix autoirq failure. Added more
- . descriptive error messages.
- . 02/15/96 Erik Stahlman Fixed typo that caused detection failure
- . 02/23/96 Erik Stahlman Modified it to fit into kernel tree
- . Added support to change hardware address
- . Cleared stats on opens
- . 02/26/96 Erik Stahlman Trial support for Kernel 1.2.13
- . Kludge for automatic IRQ detection
- . 03/04/96 Erik Stahlman Fixed kernel 1.3.70 +
- . Fixed bug reported by Gardner Buchanan in
- . smc_enable, with outw instead of outb
- . 03/06/96 Erik Stahlman Added hardware multicast from Peter Cammaert
- . 04/14/00 Heiko Pruessing (SMA Regelsysteme) Fixed bug in chip memory
- . allocation
- . 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet
- . 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ"
- . 11/08/01 Matt Domsch Use common crc32 function
- ----------------------------------------------------------------------------*/
-
-static const char version[] =
- "smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-
-#include "smc9194.h"
-
-#define DRV_NAME "smc9194"
-
-/*------------------------------------------------------------------------
- .
- . Configuration options, for the experienced user to change.
- .
- -------------------------------------------------------------------------*/
-
-/*
- . Do you want to use 32 bit xfers? This should work on all chips, as
- . the chipset is designed to accommodate them.
-*/
-#ifdef __sh__
-#undef USE_32_BIT
-#else
-#define USE_32_BIT 1
-#endif
-
-/*
- .the SMC9194 can be at any of the following port addresses. To change,
- .for a slightly different card, you can add it to the array. Keep in
- .mind that the array must end in zero.
-*/
-
-struct devlist {
- unsigned int port;
- unsigned int irq;
-};
-
-static struct devlist smc_devlist[] __initdata = {
- {.port = 0x200, .irq = 0},
- {.port = 0x220, .irq = 0},
- {.port = 0x240, .irq = 0},
- {.port = 0x260, .irq = 0},
- {.port = 0x280, .irq = 0},
- {.port = 0x2A0, .irq = 0},
- {.port = 0x2C0, .irq = 0},
- {.port = 0x2E0, .irq = 0},
- {.port = 0x300, .irq = 0},
- {.port = 0x320, .irq = 0},
- {.port = 0x340, .irq = 0},
- {.port = 0x360, .irq = 0},
- {.port = 0x380, .irq = 0},
- {.port = 0x3A0, .irq = 0},
- {.port = 0x3C0, .irq = 0},
- {.port = 0x3E0, .irq = 0},
- {.port = 0, .irq = 0},
-};
-/*
- . Wait time for memory to be free. This probably shouldn't be
- . tuned that much, as waiting for this means nothing else happens
- . in the system
-*/
-#define MEMORY_WAIT_TIME 16
-
-/*
- . DEBUGGING LEVELS
- .
- . 0 for normal operation
- . 1 for slightly more details
- . >2 for various levels of increasingly useless information
- . 2 for interrupt tracking, status flags
- . 3 for packet dumps, etc.
-*/
-#define SMC_DEBUG 0
-
-#if (SMC_DEBUG > 2 )
-#define PRINTK3(x) printk x
-#else
-#define PRINTK3(x)
-#endif
-
-#if SMC_DEBUG > 1
-#define PRINTK2(x) printk x
-#else
-#define PRINTK2(x)
-#endif
-
-#ifdef SMC_DEBUG
-#define PRINTK(x) printk x
-#else
-#define PRINTK(x)
-#endif
-
-
-/*------------------------------------------------------------------------
- .
- . The internal workings of the driver. If you are changing anything
- . here with the SMC stuff, you should have the datasheet and known
- . what you are doing.
- .
- -------------------------------------------------------------------------*/
-#define CARDNAME "SMC9194"
-
-
-/* store this information for the driver.. */
-struct smc_local {
- /*
- If I have to wait until memory is available to send
- a packet, I will store the skbuff here, until I get the
- desired memory. Then, I'll send it out and free it.
- */
- struct sk_buff * saved_skb;
-
- /*
- . This keeps track of how many packets that I have
- . sent out. When an TX_EMPTY interrupt comes, I know
- . that all of these have been sent.
- */
- int packets_waiting;
-};
-
-
-/*-----------------------------------------------------------------
- .
- . The driver can be entered at any of the following entry points.
- .
- .------------------------------------------------------------------ */
-
-/*
- . This is called by register_netdev(). It is responsible for
- . checking the portlist for the SMC9000 series chipset. If it finds
- . one, then it will initialize the device, find the hardware information,
- . and sets up the appropriate device parameters.
- . NOTE: Interrupts are *OFF* when this procedure is called.
- .
- . NB:This shouldn't be static since it is referred to externally.
-*/
-struct net_device *smc_init(int unit);
-
-/*
- . The kernel calls this function when someone wants to use the device,
- . typically 'ifconfig ethX up'.
-*/
-static int smc_open(struct net_device *dev);
-
-/*
- . Our watchdog timed out. Called by the networking layer
-*/
-static void smc_timeout(struct net_device *dev, unsigned int txqueue);
-
-/*
- . This is called by the kernel in response to 'ifconfig ethX down'. It
- . is responsible for cleaning up everything that the open routine
- . does, and maybe putting the card into a powerdown state.
-*/
-static int smc_close(struct net_device *dev);
-
-/*
- . Finally, a call to set promiscuous mode ( for TCPDUMP and related
- . programs ) and multicast modes.
-*/
-static void smc_set_multicast_list(struct net_device *dev);
-
-
-/*---------------------------------------------------------------
- .
- . Interrupt level calls..
- .
- ----------------------------------------------------------------*/
-
-/*
- . Handles the actual interrupt
-*/
-static irqreturn_t smc_interrupt(int irq, void *);
-/*
- . This is a separate procedure to handle the receipt of a packet, to
- . leave the interrupt code looking slightly cleaner
-*/
-static inline void smc_rcv( struct net_device *dev );
-/*
- . This handles a TX interrupt, which is only called when an error
- . relating to a packet is sent.
-*/
-static inline void smc_tx( struct net_device * dev );
-
-/*
- ------------------------------------------------------------
- .
- . Internal routines
- .
- ------------------------------------------------------------
-*/
-
-/*
- . Test if a given location contains a chip, trying to cause as
- . little damage as possible if it's not a SMC chip.
-*/
-static int smc_probe(struct net_device *dev, int ioaddr);
-
-/*
- . A rather simple routine to print out a packet for debugging purposes.
-*/
-#if SMC_DEBUG > 2
-static void print_packet( byte *, int );
-#endif
-
-#define tx_done(dev) 1
-
-/* this is called to actually send the packet to the chip */
-static void smc_hardware_send_packet( struct net_device * dev );
-
-/* Since I am not sure if I will have enough room in the chip's ram
- . to store the packet, I call this routine, which either sends it
- . now, or generates an interrupt when the card is ready for the
- . packet */
-static netdev_tx_t smc_wait_to_send_packet( struct sk_buff * skb,
- struct net_device *dev );
-
-/* this does a soft reset on the device */
-static void smc_reset( int ioaddr );
-
-/* Enable Interrupts, Receive, and Transmit */
-static void smc_enable( int ioaddr );
-
-/* this puts the device in an inactive state */
-static void smc_shutdown( int ioaddr );
-
-/* This routine will find the IRQ of the driver if one is not
- . specified in the input to the device. */
-static int smc_findirq( int ioaddr );
-
-/*
- . Function: smc_reset( int ioaddr )
- . Purpose:
- . This sets the SMC91xx chip to its normal state, hopefully from whatever
- . mess that any other DOS driver has put it in.
- .
- . Maybe I should reset more registers to defaults in here? SOFTRESET should
- . do that for me.
- .
- . Method:
- . 1. send a SOFT RESET
- . 2. wait for it to finish
- . 3. enable autorelease mode
- . 4. reset the memory management unit
- . 5. clear all interrupts
- .
-*/
-static void smc_reset( int ioaddr )
-{
- /* This resets the registers mostly to defaults, but doesn't
- affect EEPROM. That seems unnecessary */
- SMC_SELECT_BANK( 0 );
- outw( RCR_SOFTRESET, ioaddr + RCR );
-
- /* this should pause enough for the chip to be happy */
- SMC_DELAY( );
-
- /* Set the transmit and receive configuration registers to
- default values */
- outw( RCR_CLEAR, ioaddr + RCR );
- outw( TCR_CLEAR, ioaddr + TCR );
-
- /* set the control register to automatically
- release successfully transmitted packets, to make the best
- use out of our limited memory */
- SMC_SELECT_BANK( 1 );
- outw( inw( ioaddr + CONTROL ) | CTL_AUTO_RELEASE , ioaddr + CONTROL );
-
- /* Reset the MMU */
- SMC_SELECT_BANK( 2 );
- outw( MC_RESET, ioaddr + MMU_CMD );
-
- /* Note: It doesn't seem that waiting for the MMU busy is needed here,
- but this is a place where future chipsets _COULD_ break. Be wary
- of issuing another MMU command right after this */
-
- outb( 0, ioaddr + INT_MASK );
-}
-
-/*
- . Function: smc_enable
- . Purpose: let the chip talk to the outside work
- . Method:
- . 1. Enable the transmitter
- . 2. Enable the receiver
- . 3. Enable interrupts
-*/
-static void smc_enable( int ioaddr )
-{
- SMC_SELECT_BANK( 0 );
- /* see the header file for options in TCR/RCR NORMAL*/
- outw( TCR_NORMAL, ioaddr + TCR );
- outw( RCR_NORMAL, ioaddr + RCR );
-
- /* now, enable interrupts */
- SMC_SELECT_BANK( 2 );
- outb( SMC_INTERRUPT_MASK, ioaddr + INT_MASK );
-}
-
-/*
- . Function: smc_shutdown
- . Purpose: closes down the SMC91xxx chip.
- . Method:
- . 1. zero the interrupt mask
- . 2. clear the enable receive flag
- . 3. clear the enable xmit flags
- .
- . TODO:
- . (1) maybe utilize power down mode.
- . Why not yet? Because while the chip will go into power down mode,
- . the manual says that it will wake up in response to any I/O requests
- . in the register space. Empirical results do not show this working.
-*/
-static void smc_shutdown( int ioaddr )
-{
- /* no more interrupts for me */
- SMC_SELECT_BANK( 2 );
- outb( 0, ioaddr + INT_MASK );
-
- /* and tell the card to stay away from that nasty outside world */
- SMC_SELECT_BANK( 0 );
- outb( RCR_CLEAR, ioaddr + RCR );
- outb( TCR_CLEAR, ioaddr + TCR );
-#if 0
- /* finally, shut the chip down */
- SMC_SELECT_BANK( 1 );
- outw( inw( ioaddr + CONTROL ), CTL_POWERDOWN, ioaddr + CONTROL );
-#endif
-}
-
-
-/*
- . Function: smc_setmulticast( int ioaddr, struct net_device *dev )
- . Purpose:
- . This sets the internal hardware table to filter out unwanted multicast
- . packets before they take up memory.
- .
- . The SMC chip uses a hash table where the high 6 bits of the CRC of
- . address are the offset into the table. If that bit is 1, then the
- . multicast packet is accepted. Otherwise, it's dropped silently.
- .
- . To use the 6 bits as an offset into the table, the high 3 bits are the
- . number of the 8 bit register, while the low 3 bits are the bit within
- . that register.
- .
- . This routine is based very heavily on the one provided by Peter Cammaert.
-*/
-
-
-static void smc_setmulticast(int ioaddr, struct net_device *dev)
-{
- int i;
- unsigned char multicast_table[ 8 ];
- struct netdev_hw_addr *ha;
- /* table for flipping the order of 3 bits */
- unsigned char invert3[] = { 0, 4, 2, 6, 1, 5, 3, 7 };
-
- /* start with a table of all zeros: reject all */
- memset( multicast_table, 0, sizeof( multicast_table ) );
-
- netdev_for_each_mc_addr(ha, dev) {
- int position;
-
- /* only use the low order bits */
- position = ether_crc_le(6, ha->addr) & 0x3f;
-
- /* do some messy swapping to put the bit in the right spot */
- multicast_table[invert3[position&7]] |=
- (1<<invert3[(position>>3)&7]);
-
- }
- /* now, the table can be loaded into the chipset */
- SMC_SELECT_BANK( 3 );
-
- for ( i = 0; i < 8 ; i++ ) {
- outb( multicast_table[i], ioaddr + MULTICAST1 + i );
- }
-}
-
-/*
- . Function: smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * )
- . Purpose:
- . Attempt to allocate memory for a packet, if chip-memory is not
- . available, then tell the card to generate an interrupt when it
- . is available.
- .
- . Algorithm:
- .
- . o if the saved_skb is not currently null, then drop this packet
- . on the floor. This should never happen, because of TBUSY.
- . o if the saved_skb is null, then replace it with the current packet,
- . o See if I can sending it now.
- . o (NO): Enable interrupts and let the interrupt handler deal with it.
- . o (YES):Send it now.
-*/
-static netdev_tx_t smc_wait_to_send_packet(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct smc_local *lp = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- word length;
- unsigned short numPages;
- word time_out;
-
- netif_stop_queue(dev);
- /* Well, I want to send the packet.. but I don't know
- if I can send it right now... */
-
- if ( lp->saved_skb) {
- /* THIS SHOULD NEVER HAPPEN. */
- dev->stats.tx_aborted_errors++;
- printk(CARDNAME": Bad Craziness - sent packet while busy.\n" );
- return NETDEV_TX_BUSY;
- }
- lp->saved_skb = skb;
-
- length = skb->len;
-
- if (length < ETH_ZLEN) {
- if (skb_padto(skb, ETH_ZLEN)) {
- netif_wake_queue(dev);
- return NETDEV_TX_OK;
- }
- length = ETH_ZLEN;
- }
-
- /*
- ** The MMU wants the number of pages to be the number of 256 bytes
- ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
- **
- ** Pkt size for allocating is data length +6 (for additional status words,
- ** length and ctl!) If odd size last byte is included in this header.
- */
- numPages = ((length & 0xfffe) + 6) / 256;
-
- if (numPages > 7 ) {
- printk(CARDNAME": Far too big packet error.\n");
- /* freeing the packet is a good thing here... but should
- . any packets of this size get down here? */
- dev_kfree_skb (skb);
- lp->saved_skb = NULL;
- /* this IS an error, but, i don't want the skb saved */
- netif_wake_queue(dev);
- return NETDEV_TX_OK;
- }
- /* either way, a packet is waiting now */
- lp->packets_waiting++;
-
- /* now, try to allocate the memory */
- SMC_SELECT_BANK( 2 );
- outw( MC_ALLOC | numPages, ioaddr + MMU_CMD );
- /*
- . Performance Hack
- .
- . wait a short amount of time.. if I can send a packet now, I send
- . it now. Otherwise, I enable an interrupt and wait for one to be
- . available.
- .
- . I could have handled this a slightly different way, by checking to
- . see if any memory was available in the FREE MEMORY register. However,
- . either way, I need to generate an allocation, and the allocation works
- . no matter what, so I saw no point in checking free memory.
- */
- time_out = MEMORY_WAIT_TIME;
- do {
- word status;
-
- status = inb( ioaddr + INTERRUPT );
- if ( status & IM_ALLOC_INT ) {
- /* acknowledge the interrupt */
- outb( IM_ALLOC_INT, ioaddr + INTERRUPT );
- break;
- }
- } while ( -- time_out );
-
- if ( !time_out ) {
- /* oh well, wait until the chip finds memory later */
- SMC_ENABLE_INT( IM_ALLOC_INT );
- PRINTK2((CARDNAME": memory allocation deferred.\n"));
- /* it's deferred, but I'll handle it later */
- return NETDEV_TX_OK;
- }
- /* or YES! I can send the packet now.. */
- smc_hardware_send_packet(dev);
- netif_wake_queue(dev);
- return NETDEV_TX_OK;
-}
-
-/*
- . Function: smc_hardware_send_packet(struct net_device * )
- . Purpose:
- . This sends the actual packet to the SMC9xxx chip.
- .
- . Algorithm:
- . First, see if a saved_skb is available.
- . ( this should NOT be called if there is no 'saved_skb'
- . Now, find the packet number that the chip allocated
- . Point the data pointers at it in memory
- . Set the length word in the chip's memory
- . Dump the packet to chip memory
- . Check if a last byte is needed ( odd length packet )
- . if so, set the control flag right
- . Tell the card to send it
- . Enable the transmit interrupt, so I know if it failed
- . Free the kernel data if I actually sent it.
-*/
-static void smc_hardware_send_packet( struct net_device * dev )
-{
- struct smc_local *lp = netdev_priv(dev);
- byte packet_no;
- struct sk_buff * skb = lp->saved_skb;
- word length;
- unsigned int ioaddr;
- byte * buf;
-
- ioaddr = dev->base_addr;
-
- if ( !skb ) {
- PRINTK((CARDNAME": In XMIT with no packet to send\n"));
- return;
- }
- length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
- buf = skb->data;
-
- /* If I get here, I _know_ there is a packet slot waiting for me */
- packet_no = inb( ioaddr + PNR_ARR + 1 );
- if ( packet_no & 0x80 ) {
- /* or isn't there? BAD CHIP! */
- netdev_dbg(dev, CARDNAME": Memory allocation failed.\n");
- dev_kfree_skb_any(skb);
- lp->saved_skb = NULL;
- netif_wake_queue(dev);
- return;
- }
-
- /* we have a packet address, so tell the card to use it */
- outb( packet_no, ioaddr + PNR_ARR );
-
- /* point to the beginning of the packet */
- outw( PTR_AUTOINC , ioaddr + POINTER );
-
- PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length));
-#if SMC_DEBUG > 2
- print_packet( buf, length );
-#endif
-
- /* send the packet length ( +6 for status, length and ctl byte )
- and the status word ( set to zeros ) */
-#ifdef USE_32_BIT
- outl( (length +6 ) << 16 , ioaddr + DATA_1 );
-#else
- outw( 0, ioaddr + DATA_1 );
- /* send the packet length ( +6 for status words, length, and ctl*/
- outb( (length+6) & 0xFF,ioaddr + DATA_1 );
- outb( (length+6) >> 8 , ioaddr + DATA_1 );
-#endif
-
- /* send the actual data
- . I _think_ it's faster to send the longs first, and then
- . mop up by sending the last word. It depends heavily
- . on alignment, at least on the 486. Maybe it would be
- . a good idea to check which is optimal? But that could take
- . almost as much time as is saved?
- */
-#ifdef USE_32_BIT
- if ( length & 0x2 ) {
- outsl(ioaddr + DATA_1, buf, length >> 2 );
- outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
- }
- else
- outsl(ioaddr + DATA_1, buf, length >> 2 );
-#else
- outsw(ioaddr + DATA_1 , buf, (length ) >> 1);
-#endif
- /* Send the last byte, if there is one. */
-
- if ( (length & 1) == 0 ) {
- outw( 0, ioaddr + DATA_1 );
- } else {
- outb( buf[length -1 ], ioaddr + DATA_1 );
- outb( 0x20, ioaddr + DATA_1);
- }
-
- /* enable the interrupts */
- SMC_ENABLE_INT( (IM_TX_INT | IM_TX_EMPTY_INT) );
-
- /* and let the chipset deal with it */
- outw( MC_ENQUEUE , ioaddr + MMU_CMD );
-
- PRINTK2((CARDNAME": Sent packet of length %d\n", length));
-
- lp->saved_skb = NULL;
- dev_kfree_skb_any (skb);
-
- netif_trans_update(dev);
-
- /* we can send another packet */
- netif_wake_queue(dev);
-}
-
-/*-------------------------------------------------------------------------
- |
- | smc_init(int unit)
- | Input parameters:
- | dev->base_addr == 0, try to find all possible locations
- | dev->base_addr == 1, return failure code
- | dev->base_addr == 2, always allocate space, and return success
- | dev->base_addr == <anything else> this is the address to check
- |
- | Output:
- | pointer to net_device or ERR_PTR(error)
- |
- ---------------------------------------------------------------------------
-*/
-static int io;
-static int irq;
-static int ifport;
-
-struct net_device * __init smc_init(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct smc_local));
- struct devlist *smcdev = smc_devlist;
- int err = 0;
-
- if (!dev)
- return ERR_PTR(-ENODEV);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- io = dev->base_addr;
- irq = dev->irq;
- }
-
- if (io > 0x1ff) { /* Check a single specified location. */
- err = smc_probe(dev, io);
- } else if (io != 0) { /* Don't probe at all. */
- err = -ENXIO;
- } else {
- for (;smcdev->port; smcdev++) {
- if (smc_probe(dev, smcdev->port) == 0)
- break;
- }
- if (!smcdev->port)
- err = -ENODEV;
- }
- if (err)
- goto out;
- err = register_netdev(dev);
- if (err)
- goto out1;
- return dev;
-out1:
- free_irq(dev->irq, dev);
- release_region(dev->base_addr, SMC_IO_EXTENT);
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-
-/*----------------------------------------------------------------------
- . smc_findirq
- .
- . This routine has a simple purpose -- make the SMC chip generate an
- . interrupt, so an auto-detect routine can detect it, and find the IRQ,
- ------------------------------------------------------------------------
-*/
-static int __init smc_findirq(int ioaddr)
-{
-#ifndef NO_AUTOPROBE
- int timeout = 20;
- unsigned long cookie;
-
-
- cookie = probe_irq_on();
-
- /*
- * What I try to do here is trigger an ALLOC_INT. This is done
- * by allocating a small chunk of memory, which will give an interrupt
- * when done.
- */
-
-
- SMC_SELECT_BANK(2);
- /* enable ALLOCation interrupts ONLY */
- outb( IM_ALLOC_INT, ioaddr + INT_MASK );
-
- /*
- . Allocate 512 bytes of memory. Note that the chip was just
- . reset so all the memory is available
- */
- outw( MC_ALLOC | 1, ioaddr + MMU_CMD );
-
- /*
- . Wait until positive that the interrupt has been generated
- */
- while ( timeout ) {
- byte int_status;
-
- int_status = inb( ioaddr + INTERRUPT );
-
- if ( int_status & IM_ALLOC_INT )
- break; /* got the interrupt */
- timeout--;
- }
- /* there is really nothing that I can do here if timeout fails,
- as probe_irq_off will return a 0 anyway, which is what I
- want in this case. Plus, the clean up is needed in both
- cases. */
-
- /* DELAY HERE!
- On a fast machine, the status might change before the interrupt
- is given to the processor. This means that the interrupt was
- never detected, and probe_irq_off fails to report anything.
- This should fix probe_irq_* problems.
- */
- SMC_DELAY();
- SMC_DELAY();
-
- /* and disable all interrupts again */
- outb( 0, ioaddr + INT_MASK );
-
- /* and return what I found */
- return probe_irq_off(cookie);
-#else /* NO_AUTOPROBE */
- struct devlist *smcdev;
- for (smcdev = smc_devlist; smcdev->port; smcdev++) {
- if (smcdev->port == ioaddr)
- return smcdev->irq;
- }
- return 0;
-#endif
-}
-
-static const struct net_device_ops smc_netdev_ops = {
- .ndo_open = smc_open,
- .ndo_stop = smc_close,
- .ndo_start_xmit = smc_wait_to_send_packet,
- .ndo_tx_timeout = smc_timeout,
- .ndo_set_rx_mode = smc_set_multicast_list,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-/*----------------------------------------------------------------------
- . Function: smc_probe( int ioaddr )
- .
- . Purpose:
- . Tests to see if a given ioaddr points to an SMC9xxx chip.
- . Returns a 0 on success
- .
- . Algorithm:
- . (1) see if the high byte of BANK_SELECT is 0x33
- . (2) compare the ioaddr with the base register's address
- . (3) see if I recognize the chip ID in the appropriate register
- .
- .---------------------------------------------------------------------
- */
-
-/*---------------------------------------------------------------
- . Here I do typical initialization tasks.
- .
- . o Initialize the structure if needed
- . o print out my vanity message if not done so already
- . o print out what type of hardware is detected
- . o print out the ethernet address
- . o find the IRQ
- . o set up my private data
- . o configure the dev structure with my subroutines
- . o actually GRAB the irq.
- . o GRAB the region
- .-----------------------------------------------------------------
-*/
-static int __init smc_probe(struct net_device *dev, int ioaddr)
-{
- int i, memory, retval;
- unsigned int bank;
-
- const char *version_string;
- const char *if_string;
-
- /* registers */
- word revision_register;
- word base_address_register;
- word configuration_register;
- word memory_info_register;
- word memory_cfg_register;
- u8 addr[ETH_ALEN];
-
- /* Grab the region so that no one else tries to probe our ioports. */
- if (!request_region(ioaddr, SMC_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- dev->irq = irq;
- dev->if_port = ifport;
-
- /* First, see if the high byte is 0x33 */
- bank = inw( ioaddr + BANK_SELECT );
- if ( (bank & 0xFF00) != 0x3300 ) {
- retval = -ENODEV;
- goto err_out;
- }
- /* The above MIGHT indicate a device, but I need to write to further
- test this. */
- outw( 0x0, ioaddr + BANK_SELECT );
- bank = inw( ioaddr + BANK_SELECT );
- if ( (bank & 0xFF00 ) != 0x3300 ) {
- retval = -ENODEV;
- goto err_out;
- }
- /* well, we've already written once, so hopefully another time won't
- hurt. This time, I need to switch the bank register to bank 1,
- so I can access the base address register */
- SMC_SELECT_BANK(1);
- base_address_register = inw( ioaddr + BASE );
- if ( ioaddr != ( base_address_register >> 3 & 0x3E0 ) ) {
- printk(CARDNAME ": IOADDR %x doesn't match configuration (%x). "
- "Probably not a SMC chip\n",
- ioaddr, base_address_register >> 3 & 0x3E0 );
- /* well, the base address register didn't match. Must not have
- been a SMC chip after all. */
- retval = -ENODEV;
- goto err_out;
- }
-
- /* check if the revision register is something that I recognize.
- These might need to be added to later, as future revisions
- could be added. */
- SMC_SELECT_BANK(3);
- revision_register = inw( ioaddr + REVISION );
- if ( !chip_ids[ ( revision_register >> 4 ) & 0xF ] ) {
- /* I don't recognize this chip, so... */
- printk(CARDNAME ": IO %x: Unrecognized revision register:"
- " %x, Contact author.\n", ioaddr, revision_register);
-
- retval = -ENODEV;
- goto err_out;
- }
-
- /* at this point I'll assume that the chip is an SMC9xxx.
- It might be prudent to check a listing of MAC addresses
- against the hardware address, or do some other tests. */
-
- pr_info_once("%s\n", version);
-
- /* fill in some of the fields */
- dev->base_addr = ioaddr;
-
- /*
- . Get the MAC address ( bank 1, regs 4 - 9 )
- */
- SMC_SELECT_BANK( 1 );
- for ( i = 0; i < 6; i += 2 ) {
- word address;
-
- address = inw( ioaddr + ADDR0 + i );
- addr[i + 1] = address >> 8;
- addr[i] = address & 0xFF;
- }
- eth_hw_addr_set(dev, addr);
-
- /* get the memory information */
-
- SMC_SELECT_BANK( 0 );
- memory_info_register = inw( ioaddr + MIR );
- memory_cfg_register = inw( ioaddr + MCR );
- memory = ( memory_cfg_register >> 9 ) & 0x7; /* multiplier */
- memory *= 256 * ( memory_info_register & 0xFF );
-
- /*
- Now, I want to find out more about the chip. This is sort of
- redundant, but it's cleaner to have it in both, rather than having
- one VERY long probe procedure.
- */
- SMC_SELECT_BANK(3);
- revision_register = inw( ioaddr + REVISION );
- version_string = chip_ids[ ( revision_register >> 4 ) & 0xF ];
- if ( !version_string ) {
- /* I shouldn't get here because this call was done before.... */
- retval = -ENODEV;
- goto err_out;
- }
-
- /* is it using AUI or 10BaseT ? */
- if ( dev->if_port == 0 ) {
- SMC_SELECT_BANK(1);
- configuration_register = inw( ioaddr + CONFIG );
- if ( configuration_register & CFG_AUI_SELECT )
- dev->if_port = 2;
- else
- dev->if_port = 1;
- }
- if_string = interfaces[ dev->if_port - 1 ];
-
- /* now, reset the chip, and put it into a known state */
- smc_reset( ioaddr );
-
- /*
- . If dev->irq is 0, then the device has to be banged on to see
- . what the IRQ is.
- .
- . This banging doesn't always detect the IRQ, for unknown reasons.
- . a workaround is to reset the chip and try again.
- .
- . Interestingly, the DOS packet driver *SETS* the IRQ on the card to
- . be what is requested on the command line. I don't do that, mostly
- . because the card that I have uses a non-standard method of accessing
- . the IRQs, and because this _should_ work in most configurations.
- .
- . Specifying an IRQ is done with the assumption that the user knows
- . what (s)he is doing. No checking is done!!!!
- .
- */
- if ( dev->irq < 2 ) {
- int trials;
-
- trials = 3;
- while ( trials-- ) {
- dev->irq = smc_findirq( ioaddr );
- if ( dev->irq )
- break;
- /* kick the card and try again */
- smc_reset( ioaddr );
- }
- }
- if (dev->irq == 0 ) {
- printk(CARDNAME": Couldn't autodetect your IRQ. Use irq=xx.\n");
- retval = -ENODEV;
- goto err_out;
- }
-
- /* now, print out the card info, in a short format.. */
-
- netdev_info(dev, "%s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ",
- version_string, revision_register & 0xF, ioaddr, dev->irq,
- if_string, memory);
- /*
- . Print the Ethernet address
- */
- netdev_info(dev, "ADDR: %pM\n", dev->dev_addr);
-
- /* Grab the IRQ */
- retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
- if (retval) {
- netdev_warn(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
- DRV_NAME, dev->irq, retval);
- goto err_out;
- }
-
- dev->netdev_ops = &smc_netdev_ops;
- dev->watchdog_timeo = HZ/20;
-
- return 0;
-
-err_out:
- release_region(ioaddr, SMC_IO_EXTENT);
- return retval;
-}
-
-#if SMC_DEBUG > 2
-static void print_packet( byte * buf, int length )
-{
-#if 0
- print_hex_dump_debug(DRV_NAME, DUMP_PREFIX_OFFSET, 16, 1,
- buf, length, true);
-#endif
-}
-#endif
-
-
-/*
- * Open and Initialize the board
- *
- * Set up everything, reset the card, etc ..
- *
- */
-static int smc_open(struct net_device *dev)
-{
- int ioaddr = dev->base_addr;
-
- int i; /* used to set hw ethernet address */
-
- /* clear out all the junk that was put here before... */
- memset(netdev_priv(dev), 0, sizeof(struct smc_local));
-
- /* reset the hardware */
-
- smc_reset( ioaddr );
- smc_enable( ioaddr );
-
- /* Select which interface to use */
-
- SMC_SELECT_BANK( 1 );
- if ( dev->if_port == 1 ) {
- outw( inw( ioaddr + CONFIG ) & ~CFG_AUI_SELECT,
- ioaddr + CONFIG );
- }
- else if ( dev->if_port == 2 ) {
- outw( inw( ioaddr + CONFIG ) | CFG_AUI_SELECT,
- ioaddr + CONFIG );
- }
-
- /*
- According to Becker, I have to set the hardware address
- at this point, because the (l)user can set it with an
- ioctl. Easily done...
- */
- SMC_SELECT_BANK( 1 );
- for ( i = 0; i < 6; i += 2 ) {
- word address;
-
- address = dev->dev_addr[ i + 1 ] << 8 ;
- address |= dev->dev_addr[ i ];
- outw( address, ioaddr + ADDR0 + i );
- }
-
- netif_start_queue(dev);
- return 0;
-}
-
-/*--------------------------------------------------------
- . Called by the kernel to send a packet out into the void
- . of the net. This routine is largely based on
- . skeleton.c, from Becker.
- .--------------------------------------------------------
-*/
-
-static void smc_timeout(struct net_device *dev, unsigned int txqueue)
-{
- /* If we get here, some higher level has decided we are broken.
- There should really be a "kick me" function call instead. */
- netdev_warn(dev, CARDNAME": transmit timed out, %s?\n",
- tx_done(dev) ? "IRQ conflict" : "network cable problem");
- /* "kick" the adaptor */
- smc_reset( dev->base_addr );
- smc_enable( dev->base_addr );
- netif_trans_update(dev); /* prevent tx timeout */
- /* clear anything saved */
- ((struct smc_local *)netdev_priv(dev))->saved_skb = NULL;
- netif_wake_queue(dev);
-}
-
-/*-------------------------------------------------------------
- .
- . smc_rcv - receive a packet from the card
- .
- . There is ( at least ) a packet waiting to be read from
- . chip-memory.
- .
- . o Read the status
- . o If an error, record it
- . o otherwise, read in the packet
- --------------------------------------------------------------
-*/
-static void smc_rcv(struct net_device *dev)
-{
- int ioaddr = dev->base_addr;
- int packet_number;
- word status;
- word packet_length;
-
- /* assume bank 2 */
-
- packet_number = inw( ioaddr + FIFO_PORTS );
-
- if ( packet_number & FP_RXEMPTY ) {
- /* we got called , but nothing was on the FIFO */
- PRINTK((CARDNAME ": WARNING: smc_rcv with nothing on FIFO.\n"));
- /* don't need to restore anything */
- return;
- }
-
- /* start reading from the start of the packet */
- outw( PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER );
-
- /* First two words are status and packet_length */
- status = inw( ioaddr + DATA_1 );
- packet_length = inw( ioaddr + DATA_1 );
-
- packet_length &= 0x07ff; /* mask off top bits */
-
- PRINTK2(("RCV: STATUS %4x LENGTH %4x\n", status, packet_length ));
- /*
- . the packet length contains 3 extra words :
- . status, length, and an extra word with an odd byte .
- */
- packet_length -= 6;
-
- if ( !(status & RS_ERRORS ) ){
- /* do stuff to make a new packet */
- struct sk_buff * skb;
- byte * data;
-
- /* read one extra byte */
- if ( status & RS_ODDFRAME )
- packet_length++;
-
- /* set multicast stats */
- if ( status & RS_MULTICAST )
- dev->stats.multicast++;
-
- skb = netdev_alloc_skb(dev, packet_length + 5);
- if ( skb == NULL ) {
- dev->stats.rx_dropped++;
- goto done;
- }
-
- /*
- ! This should work without alignment, but it could be
- ! in the worse case
- */
-
- skb_reserve( skb, 2 ); /* 16 bit alignment */
-
- data = skb_put( skb, packet_length);
-
-#ifdef USE_32_BIT
- /* QUESTION: Like in the TX routine, do I want
- to send the DWORDs or the bytes first, or some
- mixture. A mixture might improve already slow PIO
- performance */
- PRINTK3((" Reading %d dwords (and %d bytes)\n",
- packet_length >> 2, packet_length & 3 ));
- insl(ioaddr + DATA_1 , data, packet_length >> 2 );
- /* read the left over bytes */
- insb( ioaddr + DATA_1, data + (packet_length & 0xFFFFFC),
- packet_length & 0x3 );
-#else
- PRINTK3((" Reading %d words and %d byte(s)\n",
- (packet_length >> 1 ), packet_length & 1 ));
- insw(ioaddr + DATA_1 , data, packet_length >> 1);
- if ( packet_length & 1 ) {
- data += packet_length & ~1;
- *(data++) = inb( ioaddr + DATA_1 );
- }
-#endif
-#if SMC_DEBUG > 2
- print_packet( data, packet_length );
-#endif
-
- skb->protocol = eth_type_trans(skb, dev );
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += packet_length;
- } else {
- /* error ... */
- dev->stats.rx_errors++;
-
- if ( status & RS_ALGNERR ) dev->stats.rx_frame_errors++;
- if ( status & (RS_TOOSHORT | RS_TOOLONG ) )
- dev->stats.rx_length_errors++;
- if ( status & RS_BADCRC) dev->stats.rx_crc_errors++;
- }
-
-done:
- /* error or good, tell the card to get rid of this packet */
- outw( MC_RELEASE, ioaddr + MMU_CMD );
-}
-
-
-/*************************************************************************
- . smc_tx
- .
- . Purpose: Handle a transmit error message. This will only be called
- . when an error, because of the AUTO_RELEASE mode.
- .
- . Algorithm:
- . Save pointer and packet no
- . Get the packet no from the top of the queue
- . check if it's valid ( if not, is this an error??? )
- . read the status word
- . record the error
- . ( resend? Not really, since we don't want old packets around )
- . Restore saved values
- ************************************************************************/
-static void smc_tx( struct net_device * dev )
-{
- int ioaddr = dev->base_addr;
- struct smc_local *lp = netdev_priv(dev);
- byte saved_packet;
- byte packet_no;
- word tx_status;
-
-
- /* assume bank 2 */
-
- saved_packet = inb( ioaddr + PNR_ARR );
- packet_no = inw( ioaddr + FIFO_PORTS );
- packet_no &= 0x7F;
-
- /* select this as the packet to read from */
- outb( packet_no, ioaddr + PNR_ARR );
-
- /* read the first word from this packet */
- outw( PTR_AUTOINC | PTR_READ, ioaddr + POINTER );
-
- tx_status = inw( ioaddr + DATA_1 );
- PRINTK3((CARDNAME": TX DONE STATUS: %4x\n", tx_status));
-
- dev->stats.tx_errors++;
- if ( tx_status & TS_LOSTCAR ) dev->stats.tx_carrier_errors++;
- if ( tx_status & TS_LATCOL ) {
- netdev_dbg(dev, CARDNAME": Late collision occurred on last xmit.\n");
- dev->stats.tx_window_errors++;
- }
-#if 0
- if ( tx_status & TS_16COL ) { ... }
-#endif
-
- if ( tx_status & TS_SUCCESS ) {
- netdev_info(dev, CARDNAME": Successful packet caused interrupt\n");
- }
- /* re-enable transmit */
- SMC_SELECT_BANK( 0 );
- outw( inw( ioaddr + TCR ) | TCR_ENABLE, ioaddr + TCR );
-
- /* kill the packet */
- SMC_SELECT_BANK( 2 );
- outw( MC_FREEPKT, ioaddr + MMU_CMD );
-
- /* one less packet waiting for me */
- lp->packets_waiting--;
-
- outb( saved_packet, ioaddr + PNR_ARR );
-}
-
-/*--------------------------------------------------------------------
- .
- . This is the main routine of the driver, to handle the device when
- . it needs some attention.
- .
- . So:
- . first, save state of the chipset
- . branch off into routines to handle each case, and acknowledge
- . each to the interrupt register
- . and finally restore state.
- .
- ---------------------------------------------------------------------*/
-
-static irqreturn_t smc_interrupt(int irq, void * dev_id)
-{
- struct net_device *dev = dev_id;
- int ioaddr = dev->base_addr;
- struct smc_local *lp = netdev_priv(dev);
-
- byte status;
- word card_stats;
- byte mask;
- int timeout;
- /* state registers */
- word saved_bank;
- word saved_pointer;
- int handled = 0;
-
-
- PRINTK3((CARDNAME": SMC interrupt started\n"));
-
- saved_bank = inw( ioaddr + BANK_SELECT );
-
- SMC_SELECT_BANK(2);
- saved_pointer = inw( ioaddr + POINTER );
-
- mask = inb( ioaddr + INT_MASK );
- /* clear all interrupts */
- outb( 0, ioaddr + INT_MASK );
-
-
- /* set a timeout value, so I don't stay here forever */
- timeout = 4;
-
- PRINTK2((KERN_WARNING CARDNAME ": MASK IS %x\n", mask));
- do {
- /* read the status flag, and mask it */
- status = inb( ioaddr + INTERRUPT ) & mask;
- if (!status )
- break;
-
- handled = 1;
-
- PRINTK3((KERN_WARNING CARDNAME
- ": Handling interrupt status %x\n", status));
-
- if (status & IM_RCV_INT) {
- /* Got a packet(s). */
- PRINTK2((KERN_WARNING CARDNAME
- ": Receive Interrupt\n"));
- smc_rcv(dev);
- } else if (status & IM_TX_INT ) {
- PRINTK2((KERN_WARNING CARDNAME
- ": TX ERROR handled\n"));
- smc_tx(dev);
- outb(IM_TX_INT, ioaddr + INTERRUPT );
- } else if (status & IM_TX_EMPTY_INT ) {
- /* update stats */
- SMC_SELECT_BANK( 0 );
- card_stats = inw( ioaddr + COUNTER );
- /* single collisions */
- dev->stats.collisions += card_stats & 0xF;
- card_stats >>= 4;
- /* multiple collisions */
- dev->stats.collisions += card_stats & 0xF;
-
- /* these are for when linux supports these statistics */
-
- SMC_SELECT_BANK( 2 );
- PRINTK2((KERN_WARNING CARDNAME
- ": TX_BUFFER_EMPTY handled\n"));
- outb( IM_TX_EMPTY_INT, ioaddr + INTERRUPT );
- mask &= ~IM_TX_EMPTY_INT;
- dev->stats.tx_packets += lp->packets_waiting;
- lp->packets_waiting = 0;
-
- } else if (status & IM_ALLOC_INT ) {
- PRINTK2((KERN_DEBUG CARDNAME
- ": Allocation interrupt\n"));
- /* clear this interrupt so it doesn't happen again */
- mask &= ~IM_ALLOC_INT;
-
- smc_hardware_send_packet( dev );
-
- /* enable xmit interrupts based on this */
- mask |= ( IM_TX_EMPTY_INT | IM_TX_INT );
-
- /* and let the card send more packets to me */
- netif_wake_queue(dev);
-
- PRINTK2((CARDNAME": Handoff done successfully.\n"));
- } else if (status & IM_RX_OVRN_INT ) {
- dev->stats.rx_errors++;
- dev->stats.rx_fifo_errors++;
- outb( IM_RX_OVRN_INT, ioaddr + INTERRUPT );
- } else if (status & IM_EPH_INT ) {
- PRINTK((CARDNAME ": UNSUPPORTED: EPH INTERRUPT\n"));
- } else if (status & IM_ERCV_INT ) {
- PRINTK((CARDNAME ": UNSUPPORTED: ERCV INTERRUPT\n"));
- outb( IM_ERCV_INT, ioaddr + INTERRUPT );
- }
- } while ( timeout -- );
-
-
- /* restore state register */
- SMC_SELECT_BANK( 2 );
- outb( mask, ioaddr + INT_MASK );
-
- PRINTK3((KERN_WARNING CARDNAME ": MASK is now %x\n", mask));
- outw( saved_pointer, ioaddr + POINTER );
-
- SMC_SELECT_BANK( saved_bank );
-
- PRINTK3((CARDNAME ": Interrupt done\n"));
- return IRQ_RETVAL(handled);
-}
-
-
-/*----------------------------------------------------
- . smc_close
- .
- . this makes the board clean up everything that it can
- . and not talk to the outside world. Caused by
- . an 'ifconfig ethX down'
- .
- -----------------------------------------------------*/
-static int smc_close(struct net_device *dev)
-{
- netif_stop_queue(dev);
- /* clear everything */
- smc_shutdown( dev->base_addr );
-
- /* Update the statistics here. */
- return 0;
-}
-
-/*-----------------------------------------------------------
- . smc_set_multicast_list
- .
- . This routine will, depending on the values passed to it,
- . either make it accept multicast packets, go into
- . promiscuous mode ( for TCPDUMP and cousins ) or accept
- . a select set of multicast packets
-*/
-static void smc_set_multicast_list(struct net_device *dev)
-{
- short ioaddr = dev->base_addr;
-
- SMC_SELECT_BANK(0);
- if ( dev->flags & IFF_PROMISC )
- outw( inw(ioaddr + RCR ) | RCR_PROMISC, ioaddr + RCR );
-
-/* BUG? I never disable promiscuous mode if multicasting was turned on.
- Now, I turn off promiscuous mode, but I don't do anything to multicasting
- when promiscuous mode is turned on.
-*/
-
- /* Here, I am setting this to accept all multicast packets.
- I don't need to zero the multicast table, because the flag is
- checked before the table is
- */
- else if (dev->flags & IFF_ALLMULTI)
- outw( inw(ioaddr + RCR ) | RCR_ALMUL, ioaddr + RCR );
-
- /* We just get all multicast packets even if we only want them
- . from one source. This will be changed at some future
- . point. */
- else if (!netdev_mc_empty(dev)) {
- /* support hardware multicasting */
-
- /* be sure I get rid of flags I might have set */
- outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
- ioaddr + RCR );
- /* NOTE: this has to set the bank, so make sure it is the
- last thing called. The bank is set to zero at the top */
- smc_setmulticast(ioaddr, dev);
- }
- else {
- outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
- ioaddr + RCR );
-
- /*
- since I'm disabling all multicast entirely, I need to
- clear the multicast list
- */
- SMC_SELECT_BANK( 3 );
- outw( 0, ioaddr + MULTICAST1 );
- outw( 0, ioaddr + MULTICAST2 );
- outw( 0, ioaddr + MULTICAST3 );
- outw( 0, ioaddr + MULTICAST4 );
- }
-}
-
-#ifdef MODULE
-
-static struct net_device *devSMC9194;
-MODULE_DESCRIPTION("SMC 9194 Ethernet driver");
-MODULE_LICENSE("GPL");
-
-module_param_hw(io, int, ioport, 0);
-module_param_hw(irq, int, irq, 0);
-module_param(ifport, int, 0);
-MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
-MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");
-MODULE_PARM_DESC(ifport, "SMC 99194 interface port (0-default, 1-TP, 2-AUI)");
-
-static int __init smc_init_module(void)
-{
- if (io == 0)
- printk(KERN_WARNING
- CARDNAME": You shouldn't use auto-probing with insmod!\n" );
-
- /* copy the parameters from insmod into the device structure */
- devSMC9194 = smc_init(-1);
- return PTR_ERR_OR_ZERO(devSMC9194);
-}
-module_init(smc_init_module);
-
-static void __exit smc_cleanup_module(void)
-{
- unregister_netdev(devSMC9194);
- free_irq(devSMC9194->irq, devSMC9194);
- release_region(devSMC9194->base_addr, SMC_IO_EXTENT);
- free_netdev(devSMC9194);
-}
-module_exit(smc_cleanup_module);
-
-#endif /* MODULE */
projects / thirdparty / linux.git / commitdiff
