dt-bindings: dsa: Rewrite Micrel KS8995 in schema

After studying the datasheets for some of the KS8995 variants
it becomes pretty obvious that this is a straight-forward
and simple MII DSA switch with one port in (CPU) and four outgoing
ports, and it even supports custom tags by setting a bit in
a special register, and elaborate VLAN handling as all DSA
switches do.

What is a bit odd with KS8995 is that it uses an extra MII-P5
port to access one of the PHYs separately, on the side of the
switch fabric, such as when using a WAN port separately from
a LAN switch in a home router.

Rewrite the terse bindings to YAML, and move to the proper
subdirectory. Include a verbose example to make things clear.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250625-ks8995-dsa-bindings-v2-1-ce71dce9be0b@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/Documentation/devicetree/bindings/net/dsa/micrel,ks8995.yaml b/Documentation/devicetree/bindings/net/dsa/micrel,ks8995.yaml
new file mode 100644 (file)
index 0000000..854808f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/micrel,ks8995.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/micrel,ks8995.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Micrel KS8995 Family DSA Switches
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The Micrel KS8995 DSA Switches are 100 Mbit switches that were produced in
+  the early-to-mid 2000s. The chip features a CPU port and four outgoing ports,
+  each with an internal PHY. The chip itself is managed over SPI, but all the
+  PHYs need to be accessed from an external MDIO channel.
+
+  Further, a fifth PHY is available and can be used separately from the switch
+  fabric, connected to an external MII interface name MII-P5. This is
+  unrelated from the CPU-facing port 5 which is used for DSA MII traffic.
+
+properties:
+  compatible:
+    enum:
+      - micrel,ks8995
+      - micrel,ksz8795
+      - micrel,ksz8864
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO to be used to reset the whole device
+    maxItems: 1
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet-switch@0 {
+        compatible = "micrel,ks8995";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+
+        ethernet-ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          ethernet-port@0 {
+            reg = <0>;
+            label = "lan1";
+          };
+          ethernet-port@1 {
+            reg = <1>;
+            label = "lan2";
+          };
+          ethernet-port@2 {
+            reg = <2>;
+            label = "lan3";
+          };
+          ethernet-port@3 {
+            reg = <3>;
+            label = "lan4";
+          };
+          ethernet-port@4 {
+            reg = <4>;
+            ethernet = <&mac2>;
+            phy-mode = "mii";
+            fixed-link {
+              speed = <100>;
+              full-duplex;
+            };
+          };
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      /* The WAN port connected on MII-P5 */
+      ethernet-port@1000 {
+        reg = <0x00001000 0x1000>;
+        label = "wan";
+        phy-mode = "mii";
+        phy-handle = <&phy5>;
+      };
+
+      mac2: ethernet-port@2000 {
+        reg = <0x00002000 0x1000>;
+        phy-mode = "mii";
+        fixed-link {
+          speed = <100>;
+          full-duplex;
+        };
+      };
+    };
+
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      /* LAN PHYs 1-4 accessible over external MDIO */
+      phy1: ethernet-phy@1 {
+        reg = <1>;
+      };
+      phy2: ethernet-phy@2 {
+        reg = <2>;
+      };
+      phy3: ethernet-phy@3 {
+        reg = <3>;
+      };
+      phy4: ethernet-phy@4 {
+        reg = <4>;
+      };
+      /* WAN PHY accessible over external MDIO */
+      phy5: ethernet-phy@5 {
+        reg = <5>;
+      };
+    };

diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
deleted file mode 100644 (file)
index 281bc24..0000000
--- a/Documentation/devicetree/bindings/net/micrel-ks8995.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Micrel KS8995 SPI controlled Ethernet Switch families
-
-Required properties (according to spi-bus.txt):
-- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"
-
-Optional properties:
-- reset-gpios : phandle of gpio that will be used to reset chip during probe
-
-Example:
-
-spi-master {
-       ...
-       switch@0 {
-               compatible = "micrel,ksz8795";
-
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-               reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
-       };
-};