Moving doc/BIND-libraries to 43327

diff --git a/doc/BIND-libraries b/doc/BIND-libraries
deleted file mode 100644 (file)
index a2e2b2c..0000000
--- a/doc/BIND-libraries
+++ /dev/null
@@ -1,158 +0,0 @@
-Current ISC DHCP uses the BIND 9 libraries for some services.
-These libraries can be embedded in the bind directory or external using
-the configuration parameter --with-libbind=PATH with PATh pointing to
-the directory where can be found includes and libraries.
-
-Using standard embedded libraries is safe but you can configure
-them with extra parameters (cf --with-bind-extra-config) or simply
-use external libraries with a different configuration.
-
-Note if you want to share libraries between bind 9 and ISC DHCP
-BIND 9 must be built and installed before ISC DHCP build is configured.
-
-Three cases are possible:
- - everything builds and works fine
-
- - building requires extra parameters, for instance --enable-threads
-  can require a link parameter to find  POSIX threads.
-  In this case you should look at the config.status file of the bind
-  libraries, take CC, CPPFLAGS, CFLAGS, LIBS or LDFLAGS related
-  parameters, and add them to the call to make.
-
- - even when the previous step succeeds ISC DHCP still does not work
-  properly. We are trying to collect such cases (cf the list bellow)
-  but unfortunately you have to forget the particular feature.
-
-Below you have 3 kinds of don't use:
- - please don't use means it should likely break ISC DHCP
-
- - don't use means unless you don't have a good reason to use it
-
- - by default don't use it means you should not use it for embedded
-  libraries but it doesn't lead to problems (other than possible
-  new ISC DHCP build flags and bigger binaries) when used for
-  external BIND 9 libraries
-
-Possible bind9 configuration flags:
- -h, --help, -V, --version
-    make configure to exit immediately so don't use
-
- -q, --quiet, --silent, --cache-file, -C, --config-cache,
- --with-make-clean
-    you have no reason to use them but they should not have bad effect
-
- -n, --no-create
-    make configure to exit too early so don't use
-
- --prefix, --exec-prefix
-    not used for embedded libraries but used by BIND 9
-
- --bindir, --sbindir, --libexecdir, --sysconfdir, --sharedstatedir,
- --localstatedir, --oldincludedir,  --datarootdir, --datadir, --infodir,
- --localedir, --mandir, --docdir, --htmldir, --dvidir, --pdfdir, --psdir
-    not used for embedded nor BIND 9 for its includes and libraries
-
- --libdir, --includedir
-    used for embedded libraries for the make install (cf the
-    --enable-bind-install ISC DHCP configuration parameter)
-
- --build, --host
-    used for cross compiling and handled by ISC DHCP configure
-
- --disable-option-checking
-    this disables a sanity check so please don't use
-
- --enable-shared, --enable-static, --enable-fast-install
-    ignored by embedded or BIND 9 libraries configure
-
- --disable-libtool-lock
-    parallel builds don't work for embedded or BIND 9 libraries build
-    so it should not have any effect
-
-  --enable-libbind
-    this was deprecated so please don't use
-
-  --enable-warn-shadow
-    for developers, should have no effect if compilers don't raise errors
-    (vs warnings) on this (and a shadowing was left)
-
-  --enable-warn-error, --with-sysroot
-    this likely breaks the build so please don't use
-
-  --enable-developer
-    for developers, should have no direct effect but still recommend
-    to not use it
-
-  --enable-afl
-    for developers, useless for ISC DHCP so don't use
-
-  --enable-seccomp
-    this should not have any effect for ISC DHCP?
-
-  --enable-kqueue, --enable-epoll, --enable-devpoll
-    please use them at the ISC DHCP configure level, they should work
-    but not yet fully tested so use at your own risk
-
-  --enable-threads
-    this should work but not yet fully tested so use at your own risk.
-    Note on many systems it requires an extra flag for ISC DHCP building
-
-  --enable-native-pkcs11
-    You should not have a reason to use this and it likely won't work
-    so please don't use
-
-  --enable-openssl-hash
-    It likely requires a fix in ISC DHCP so please don't use
-
-  --enable-openssl-version-check
-    You should never use an antic version of OpenSSL with known
-    security bugs so please don't use
-
-  --enable-largefile
-    Perhaps there is no systems today where this is required so
-    by default don't use
-
-  --enable-backtrace, --enable-symtable
-    this should have no effect for ISC DHCP?
-
-  --enable-ipv6, --enable-getifaddrs, --enable-atomic
-    please leave embedded or BIND 9 libraries configure to do its job
-    so please don't use
-
-  --disable-isc-spnego, --with-gssapi
-    this should have no effect for ISC DHCP?
-
-  --disable-chroot, --disable-linux-caps, --enable-fixed-rrset,
-  --disable-rpz-nsip, --disable-rpz-nsdname, --enable-filter-aaaa,
-  --enable-querytrace, --enable-full-report, --with-python,
-  --with-locktype, --with-pkcs11, --with-ecdsa, --with-gost,
-  --with-aes, --with-cc-alg, --with-purify, --with-gperftools-profiler,
-  --with-kame, --with-docbook-xsl, --with-dlopen
-    this should have no effect for ISC DHCP
-
-  --enable-dnstap, --with-geoip, --with-lmdb, --with-libxml2,
-  --with-libjson, --with-zlib, --with-readline, --with-protobuf-c,
-  --with-libfstrm, --with-idn, --with-libiconv, --with-iconv,
-  --with-idnlib, --with-dlz-*
-    useless for ISC DHCP so by default don't use
-
-  --with-pic
-    this should have no effect for ISC DHCP?
-
-  --with-gnu-ld
-    this should have no effect for ISC DHCP?
-
-  --with-randomdev, --with-atf
-    please use them at the ISC DHCP configure level
-
-  --with-libtool
-    not yet supported so please don't use
-
-  --with-openssl
-    useless for ISC DHCP by default don't use but remember it is
-    required for DNSSEC
-
-  --with-tuning
-    by default don't use
-
-  
\ No newline at end of file