+++ /dev/null
-/*======================================================================
-
- A PCMCIA ethernet driver for SMC91c92-based cards.
-
- This driver supports Megahertz PCMCIA ethernet cards; and
- Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem
- multifunction cards.
-
- Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
-
- smc91c92_cs.c 1.122 2002/10/25 06:26:39
-
- This driver contains code written by Donald Becker
- (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au),
- David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman
- (erik@vt.edu). Donald wrote the SMC 91c92 code using parts of
- Erik's SMC 91c94 driver. Rowan wrote a similar driver, and I've
- incorporated some parts of his driver here. I (Dave) wrote most
- of the PCMCIA glue code, and the Ositech support code. Kelly
- Stephens (kstephen@holli.com) added support for the Motorola
- Mariner, with help from Allen Brost.
-
- This software may be used and distributed according to the terms of
- the GNU General Public License, incorporated herein by reference.
-
-======================================================================*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/crc32.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/jiffies.h>
-#include <linux/firmware.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/ss.h>
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-
-/*====================================================================*/
-
-static const char *if_names[] = { "auto", "10baseT", "10base2"};
-
-/* Firmware name */
-#define FIRMWARE_NAME "ositech/Xilinx7OD.bin"
-
-/* Module parameters */
-
-MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(FIRMWARE_NAME);
-
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-/*
- Transceiver/media type.
- 0 = auto
- 1 = 10baseT (and autoselect if #define AUTOSELECT),
- 2 = AUI/10base2,
-*/
-INT_MODULE_PARM(if_port, 0);
-
-
-#define DRV_NAME "smc91c92_cs"
-#define DRV_VERSION "1.123"
-
-/*====================================================================*/
-
-/* Operational parameter that usually are not changed. */
-
-/* Time in jiffies before concluding Tx hung */
-#define TX_TIMEOUT ((400*HZ)/1000)
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-#define INTR_WORK 4
-
-/* Times to check the check the chip before concluding that it doesn't
- currently have room for another Tx packet. */
-#define MEMORY_WAIT_TIME 8
-
-struct smc_private {
- struct pcmcia_device *p_dev;
- spinlock_t lock;
- u_short manfid;
- u_short cardid;
-
- struct sk_buff *saved_skb;
- int packets_waiting;
- void __iomem *base;
- u_short cfg;
- struct timer_list media;
- int watchdog, tx_err;
- u_short media_status;
- u_short fast_poll;
- u_short link_status;
- struct mii_if_info mii_if;
- int duplex;
- int rx_ovrn;
- unsigned long last_rx;
-};
-
-/* Special definitions for Megahertz multifunction cards */
-#define MEGAHERTZ_ISR 0x0380
-
-/* Special function registers for Motorola Mariner */
-#define MOT_LAN 0x0000
-#define MOT_UART 0x0020
-#define MOT_EEPROM 0x20
-
-#define MOT_NORMAL \
-(COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA)
-
-/* Special function registers for Ositech cards */
-#define OSITECH_AUI_CTL 0x0c
-#define OSITECH_PWRDOWN 0x0d
-#define OSITECH_RESET 0x0e
-#define OSITECH_ISR 0x0f
-#define OSITECH_AUI_PWR 0x0c
-#define OSITECH_RESET_ISR 0x0e
-
-#define OSI_AUI_PWR 0x40
-#define OSI_LAN_PWRDOWN 0x02
-#define OSI_MODEM_PWRDOWN 0x01
-#define OSI_LAN_RESET 0x02
-#define OSI_MODEM_RESET 0x01
-
-/* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */
-#define BANK_SELECT 14 /* Window select register. */
-#define SMC_SELECT_BANK(x) { outw(x, ioaddr + BANK_SELECT); }
-
-/* Bank 0 registers. */
-#define TCR 0 /* transmit control register */
-#define TCR_CLEAR 0 /* do NOTHING */
-#define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */
-#define TCR_PAD_EN 0x0080 /* pads short packets to 64 bytes */
-#define TCR_MONCSN 0x0400 /* Monitor Carrier. */
-#define TCR_FDUPLX 0x0800 /* Full duplex mode. */
-#define TCR_NORMAL TCR_ENABLE | TCR_PAD_EN
-
-#define EPH 2 /* Ethernet Protocol Handler report. */
-#define EPH_TX_SUC 0x0001
-#define EPH_SNGLCOL 0x0002
-#define EPH_MULCOL 0x0004
-#define EPH_LTX_MULT 0x0008
-#define EPH_16COL 0x0010
-#define EPH_SQET 0x0020
-#define EPH_LTX_BRD 0x0040
-#define EPH_TX_DEFR 0x0080
-#define EPH_LAT_COL 0x0200
-#define EPH_LOST_CAR 0x0400
-#define EPH_EXC_DEF 0x0800
-#define EPH_CTR_ROL 0x1000
-#define EPH_RX_OVRN 0x2000
-#define EPH_LINK_OK 0x4000
-#define EPH_TX_UNRN 0x8000
-#define MEMINFO 8 /* Memory Information Register */
-#define MEMCFG 10 /* Memory Configuration Register */
-
-/* Bank 1 registers. */
-#define CONFIG 0
-#define CFG_MII_SELECT 0x8000 /* 91C100 only */
-#define CFG_NO_WAIT 0x1000
-#define CFG_FULL_STEP 0x0400
-#define CFG_SET_SQLCH 0x0200
-#define CFG_AUI_SELECT 0x0100
-#define CFG_16BIT 0x0080
-#define CFG_DIS_LINK 0x0040
-#define CFG_STATIC 0x0030
-#define CFG_IRQ_SEL_1 0x0004
-#define CFG_IRQ_SEL_0 0x0002
-#define BASE_ADDR 2
-#define ADDR0 4
-#define GENERAL 10
-#define CONTROL 12
-#define CTL_STORE 0x0001
-#define CTL_RELOAD 0x0002
-#define CTL_EE_SELECT 0x0004
-#define CTL_TE_ENABLE 0x0020
-#define CTL_CR_ENABLE 0x0040
-#define CTL_LE_ENABLE 0x0080
-#define CTL_AUTO_RELEASE 0x0800
-#define CTL_POWERDOWN 0x2000
-
-/* Bank 2 registers. */
-#define MMU_CMD 0
-#define MC_ALLOC 0x20 /* or with number of 256 byte packets */
-#define MC_RESET 0x40
-#define MC_RELEASE 0x80 /* remove and release the current rx packet */
-#define MC_FREEPKT 0xA0 /* Release packet in PNR register */
-#define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */
-#define PNR_ARR 2
-#define FIFO_PORTS 4
-#define FP_RXEMPTY 0x8000
-#define POINTER 6
-#define PTR_AUTO_INC 0x0040
-#define PTR_READ 0x2000
-#define PTR_AUTOINC 0x4000
-#define PTR_RCV 0x8000
-#define DATA_1 8
-#define INTERRUPT 12
-#define IM_RCV_INT 0x1
-#define IM_TX_INT 0x2
-#define IM_TX_EMPTY_INT 0x4
-#define IM_ALLOC_INT 0x8
-#define IM_RX_OVRN_INT 0x10
-#define IM_EPH_INT 0x20
-
-#define RCR 4
-enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
- RxEnable = 0x0100, RxStripCRC = 0x0200};
-#define RCR_SOFTRESET 0x8000 /* resets the chip */
-#define RCR_STRIP_CRC 0x200 /* strips CRC */
-#define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */
-#define RCR_ALMUL 0x4 /* receive all multicast packets */
-#define RCR_PROMISC 0x2 /* enable promiscuous mode */
-
-/* the normal settings for the RCR register : */
-#define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE)
-#define RCR_CLEAR 0x0 /* set it to a base state */
-#define COUNTER 6
-
-/* BANK 3 -- not the same values as in smc9194! */
-#define MULTICAST0 0
-#define MULTICAST2 2
-#define MULTICAST4 4
-#define MULTICAST6 6
-#define MGMT 8
-#define REVISION 0x0a
-
-/* Transmit status bits. */
-#define TS_SUCCESS 0x0001
-#define TS_16COL 0x0010
-#define TS_LATCOL 0x0200
-#define TS_LOSTCAR 0x0400
-
-/* Receive status bits. */
-#define RS_ALGNERR 0x8000
-#define RS_BADCRC 0x2000
-#define RS_ODDFRAME 0x1000
-#define RS_TOOLONG 0x0800
-#define RS_TOOSHORT 0x0400
-#define RS_MULTICAST 0x0001
-#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
-
-#define set_bits(v, p) outw(inw(p)|(v), (p))
-#define mask_bits(v, p) outw(inw(p)&(v), (p))
-
-/*====================================================================*/
-
-static void smc91c92_detach(struct pcmcia_device *p_dev);
-static int smc91c92_config(struct pcmcia_device *link);
-static void smc91c92_release(struct pcmcia_device *link);
-
-static int smc_open(struct net_device *dev);
-static int smc_close(struct net_device *dev);
-static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void smc_tx_timeout(struct net_device *dev, unsigned int txqueue);
-static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
-static irqreturn_t smc_interrupt(int irq, void *dev_id);
-static void smc_rx(struct net_device *dev);
-static void set_rx_mode(struct net_device *dev);
-static int s9k_config(struct net_device *dev, struct ifmap *map);
-static void smc_set_xcvr(struct net_device *dev, int if_port);
-static void smc_reset(struct net_device *dev);
-static void media_check(struct timer_list *t);
-static void mdio_sync(unsigned int addr);
-static int mdio_read(struct net_device *dev, int phy_id, int loc);
-static void mdio_write(struct net_device *dev, int phy_id, int loc, int value);
-static int smc_link_ok(struct net_device *dev);
-static const struct ethtool_ops ethtool_ops;
-
-static const struct net_device_ops smc_netdev_ops = {
- .ndo_open = smc_open,
- .ndo_stop = smc_close,
- .ndo_start_xmit = smc_start_xmit,
- .ndo_tx_timeout = smc_tx_timeout,
- .ndo_set_config = s9k_config,
- .ndo_set_rx_mode = set_rx_mode,
- .ndo_eth_ioctl = smc_ioctl,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int smc91c92_probe(struct pcmcia_device *link)
-{
- struct smc_private *smc;
- struct net_device *dev;
-
- dev_dbg(&link->dev, "smc91c92_attach()\n");
-
- /* Create new ethernet device */
- dev = alloc_etherdev(sizeof(struct smc_private));
- if (!dev)
- return -ENOMEM;
- smc = netdev_priv(dev);
- smc->p_dev = link;
- link->priv = dev;
-
- spin_lock_init(&smc->lock);
-
- /* The SMC91c92-specific entries in the device structure. */
- dev->netdev_ops = &smc_netdev_ops;
- dev->ethtool_ops = ðtool_ops;
- dev->watchdog_timeo = TX_TIMEOUT;
-
- smc->mii_if.dev = dev;
- smc->mii_if.mdio_read = mdio_read;
- smc->mii_if.mdio_write = mdio_write;
- smc->mii_if.phy_id_mask = 0x1f;
- smc->mii_if.reg_num_mask = 0x1f;
-
- return smc91c92_config(link);
-} /* smc91c92_attach */
-
-static void smc91c92_detach(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- dev_dbg(&link->dev, "smc91c92_detach\n");
-
- unregister_netdev(dev);
-
- smc91c92_release(link);
-
- free_netdev(dev);
-} /* smc91c92_detach */
-
-/*====================================================================*/
-
-static int cvt_ascii_address(struct net_device *dev, char *s)
-{
- u8 mac[ETH_ALEN];
- int i, j, da, c;
-
- if (strlen(s) != 12)
- return -1;
- for (i = 0; i < 6; i++) {
- da = 0;
- for (j = 0; j < 2; j++) {
- c = *s++;
- da <<= 4;
- da += ((c >= '0') && (c <= '9')) ?
- (c - '0') : ((c & 0x0f) + 9);
- }
- mac[i] = da;
- }
- eth_hw_addr_set(dev, mac);
- return 0;
-}
-
-/*====================================================================
-
- Configuration stuff for Megahertz cards
-
- mhz_3288_power() is used to power up a 3288's ethernet chip.
- mhz_mfc_config() handles socket setup for multifunction (1144
- and 3288) cards. mhz_setup() gets a card's hardware ethernet
- address.
-
-======================================================================*/
-
-static int mhz_3288_power(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct smc_private *smc = netdev_priv(dev);
- u_char tmp;
-
- /* Read the ISR twice... */
- readb(smc->base+MEGAHERTZ_ISR);
- udelay(5);
- readb(smc->base+MEGAHERTZ_ISR);
-
- /* Pause 200ms... */
- mdelay(200);
-
- /* Now read and write the COR... */
- tmp = readb(smc->base + link->config_base + CISREG_COR);
- udelay(5);
- writeb(tmp, smc->base + link->config_base + CISREG_COR);
-
- return 0;
-}
-
-static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- int k;
- p_dev->io_lines = 16;
- p_dev->resource[1]->start = p_dev->resource[0]->start;
- p_dev->resource[1]->end = 8;
- p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->resource[0]->end = 16;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- for (k = 0; k < 0x400; k += 0x10) {
- if (k & 0x80)
- continue;
- p_dev->resource[0]->start = k ^ 0x300;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
- return -ENODEV;
-}
-
-static int mhz_mfc_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct smc_private *smc = netdev_priv(dev);
- unsigned int offset;
- int i;
-
- link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ |
- CONF_AUTO_SET_IO;
-
- /* The Megahertz combo cards have modem-like CIS entries, so
- we have to explicitly try a bunch of port combinations. */
- if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
- return -ENODEV;
-
- dev->base_addr = link->resource[0]->start;
-
- /* Allocate a memory window, for accessing the ISR */
- link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
- link->resource[2]->start = link->resource[2]->end = 0;
- i = pcmcia_request_window(link, link->resource[2], 0);
- if (i != 0)
- return -ENODEV;
-
- smc->base = ioremap(link->resource[2]->start,
- resource_size(link->resource[2]));
- offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0;
- i = pcmcia_map_mem_page(link, link->resource[2], offset);
- if ((i == 0) &&
- (smc->manfid == MANFID_MEGAHERTZ) &&
- (smc->cardid == PRODID_MEGAHERTZ_EM3288))
- mhz_3288_power(link);
-
- return 0;
-}
-
-static int pcmcia_get_versmac(struct pcmcia_device *p_dev,
- tuple_t *tuple,
- void *priv)
-{
- struct net_device *dev = priv;
- cisparse_t parse;
- u8 *buf;
-
- if (pcmcia_parse_tuple(tuple, &parse))
- return -EINVAL;
-
- buf = parse.version_1.str + parse.version_1.ofs[3];
-
- if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0))
- return 0;
-
- return -EINVAL;
-};
-
-static int mhz_setup(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- size_t len;
- u8 *buf;
- int rc;
-
- /* Read the station address from the CIS. It is stored as the last
- (fourth) string in the Version 1 Version/ID tuple. */
- if ((link->prod_id[3]) &&
- (cvt_ascii_address(dev, link->prod_id[3]) == 0))
- return 0;
-
- /* Workarounds for broken cards start here. */
- /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
- if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev))
- return 0;
-
- /* Another possibility: for the EM3288, in a special tuple */
- rc = -1;
- len = pcmcia_get_tuple(link, 0x81, &buf);
- if (buf && len >= 13) {
- buf[12] = '\0';
- if (cvt_ascii_address(dev, buf) == 0)
- rc = 0;
- }
- kfree(buf);
-
- return rc;
-};
-
-/*======================================================================
-
- Configuration stuff for the Motorola Mariner
-
- mot_config() writes directly to the Mariner configuration
- registers because the CIS is just bogus.
-
-======================================================================*/
-
-static void mot_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- unsigned int iouart = link->resource[1]->start;
-
- /* Set UART base address and force map with COR bit 1 */
- writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0);
- writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1);
- writeb(MOT_NORMAL, smc->base + MOT_UART + CISREG_COR);
-
- /* Set SMC base address and force map with COR bit 1 */
- writeb(ioaddr & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_0);
- writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1);
- writeb(MOT_NORMAL, smc->base + MOT_LAN + CISREG_COR);
-
- /* Wait for things to settle down */
- mdelay(100);
-}
-
-static int mot_setup(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- unsigned int ioaddr = dev->base_addr;
- int i, wait, loop;
- u8 mac[ETH_ALEN];
- u_int addr;
-
- /* Read Ethernet address from Serial EEPROM */
-
- for (i = 0; i < 3; i++) {
- SMC_SELECT_BANK(2);
- outw(MOT_EEPROM + i, ioaddr + POINTER);
- SMC_SELECT_BANK(1);
- outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL);
-
- for (loop = wait = 0; loop < 200; loop++) {
- udelay(10);
- wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL));
- if (wait == 0) break;
- }
-
- if (wait)
- return -1;
-
- addr = inw(ioaddr + GENERAL);
- mac[2*i] = addr & 0xff;
- mac[2*i+1] = (addr >> 8) & 0xff;
- }
- eth_hw_addr_set(dev, mac);
-
- return 0;
-}
-
-/*====================================================================*/
-
-static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data)
-{
- p_dev->resource[0]->end = 16;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-
- return pcmcia_request_io(p_dev);
-}
-
-static int smc_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- int i;
-
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
-
- i = pcmcia_loop_config(link, smc_configcheck, NULL);
- if (!i)
- dev->base_addr = link->resource[0]->start;
-
- return i;
-}
-
-
-static int smc_setup(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- /* Check for a LAN function extension tuple */
- if (!pcmcia_get_mac_from_cis(link, dev))
- return 0;
-
- /* Try the third string in the Version 1 Version/ID tuple. */
- if (link->prod_id[2]) {
- if (cvt_ascii_address(dev, link->prod_id[2]) == 0)
- return 0;
- }
- return -1;
-}
-
-/*====================================================================*/
-
-static int osi_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
- int i, j;
-
- link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ;
- link->resource[0]->end = 64;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[1]->end = 8;
-
- /* Enable Hard Decode, LAN, Modem */
- link->io_lines = 16;
- link->config_index = 0x23;
-
- for (i = j = 0; j < 4; j++) {
- link->resource[1]->start = com[j];
- i = pcmcia_request_io(link);
- if (i == 0)
- break;
- }
- if (i != 0) {
- /* Fallback: turn off hard decode */
- link->config_index = 0x03;
- link->resource[1]->end = 0;
- i = pcmcia_request_io(link);
- }
- dev->base_addr = link->resource[0]->start + 0x10;
- return i;
-}
-
-static int osi_load_firmware(struct pcmcia_device *link)
-{
- const struct firmware *fw;
- int i, err;
-
- err = request_firmware(&fw, FIRMWARE_NAME, &link->dev);
- if (err) {
- pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME);
- return err;
- }
-
- /* Download the Seven of Diamonds firmware */
- for (i = 0; i < fw->size; i++) {
- outb(fw->data[i], link->resource[0]->start + 2);
- udelay(50);
- }
- release_firmware(fw);
- return err;
-}
-
-static int pcmcia_osi_mac(struct pcmcia_device *p_dev,
- tuple_t *tuple,
- void *priv)
-{
- struct net_device *dev = priv;
-
- if (tuple->TupleDataLen < 8)
- return -EINVAL;
- if (tuple->TupleData[0] != 0x04)
- return -EINVAL;
-
- eth_hw_addr_set(dev, &tuple->TupleData[2]);
- return 0;
-};
-
-
-static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
-{
- struct net_device *dev = link->priv;
- int rc;
-
- /* Read the station address from tuple 0x90, subtuple 0x04 */
- if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev))
- return -1;
-
- if (((manfid == MANFID_OSITECH) &&
- (cardid == PRODID_OSITECH_SEVEN)) ||
- ((manfid == MANFID_PSION) &&
- (cardid == PRODID_PSION_NET100))) {
- rc = osi_load_firmware(link);
- if (rc)
- return rc;
- } else if (manfid == MANFID_OSITECH) {
- /* Make sure both functions are powered up */
- set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
- /* Now, turn on the interrupt for both card functions */
- set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
- dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
- inw(link->resource[0]->start + OSITECH_AUI_PWR),
- inw(link->resource[0]->start + OSITECH_RESET_ISR));
- }
- return 0;
-}
-
-static int smc91c92_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open)
- netif_device_detach(dev);
-
- return 0;
-}
-
-static int smc91c92_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct smc_private *smc = netdev_priv(dev);
- int i;
-
- if ((smc->manfid == MANFID_MEGAHERTZ) &&
- (smc->cardid == PRODID_MEGAHERTZ_EM3288))
- mhz_3288_power(link);
- if (smc->manfid == MANFID_MOTOROLA)
- mot_config(link);
- if ((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid != PRODID_OSITECH_SEVEN)) {
- /* Power up the card and enable interrupts */
- set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
- set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
- }
- if (((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid == PRODID_OSITECH_SEVEN)) ||
- ((smc->manfid == MANFID_PSION) &&
- (smc->cardid == PRODID_PSION_NET100))) {
- i = osi_load_firmware(link);
- if (i) {
- netdev_err(dev, "Failed to load firmware\n");
- return i;
- }
- }
- if (link->open) {
- smc_reset(dev);
- netif_device_attach(dev);
- }
-
- return 0;
-}
-
-
-/*======================================================================
-
- This verifies that the chip is some SMC91cXX variant, and returns
- the revision code if successful. Otherwise, it returns -ENODEV.
-
-======================================================================*/
-
-static int check_sig(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- unsigned int ioaddr = dev->base_addr;
- int width;
- u_short s;
-
- SMC_SELECT_BANK(1);
- if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) {
- /* Try powering up the chip */
- outw(0, ioaddr + CONTROL);
- mdelay(55);
- }
-
- /* Try setting bus width */
- width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
- s = inb(ioaddr + CONFIG);
- if (width)
- s |= CFG_16BIT;
- else
- s &= ~CFG_16BIT;
- outb(s, ioaddr + CONFIG);
-
- /* Check Base Address Register to make sure bus width is OK */
- s = inw(ioaddr + BASE_ADDR);
- if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) &&
- ((s >> 8) != (s & 0xff))) {
- SMC_SELECT_BANK(3);
- s = inw(ioaddr + REVISION);
- return s & 0xff;
- }
-
- if (width) {
- netdev_info(dev, "using 8-bit IO window\n");
-
- smc91c92_suspend(link);
- pcmcia_fixup_iowidth(link);
- smc91c92_resume(link);
- return check_sig(link);
- }
- return -ENODEV;
-}
-
-static int smc91c92_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- struct smc_private *smc = netdev_priv(dev);
- char *name;
- int i, rev, j = 0;
- unsigned int ioaddr;
- u_long mir;
-
- dev_dbg(&link->dev, "smc91c92_config\n");
-
- smc->manfid = link->manf_id;
- smc->cardid = link->card_id;
-
- if ((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid != PRODID_OSITECH_SEVEN)) {
- i = osi_config(link);
- } else if ((smc->manfid == MANFID_MOTOROLA) ||
- ((smc->manfid == MANFID_MEGAHERTZ) &&
- ((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) ||
- (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) {
- i = mhz_mfc_config(link);
- } else {
- i = smc_config(link);
- }
- if (i)
- goto config_failed;
-
- i = pcmcia_request_irq(link, smc_interrupt);
- if (i)
- goto config_failed;
- i = pcmcia_enable_device(link);
- if (i)
- goto config_failed;
-
- if (smc->manfid == MANFID_MOTOROLA)
- mot_config(link);
-
- dev->irq = link->irq;
-
- if ((if_port >= 0) && (if_port <= 2))
- dev->if_port = if_port;
- else
- dev_notice(&link->dev, "invalid if_port requested\n");
-
- switch (smc->manfid) {
- case MANFID_OSITECH:
- case MANFID_PSION:
- i = osi_setup(link, smc->manfid, smc->cardid); break;
- case MANFID_SMC:
- case MANFID_NEW_MEDIA:
- i = smc_setup(link); break;
- case 0x128: /* For broken Megahertz cards */
- case MANFID_MEGAHERTZ:
- i = mhz_setup(link); break;
- case MANFID_MOTOROLA:
- default: /* get the hw address from EEPROM */
- i = mot_setup(link); break;
- }
-
- if (i != 0) {
- dev_notice(&link->dev, "Unable to find hardware address.\n");
- goto config_failed;
- }
-
- smc->duplex = 0;
- smc->rx_ovrn = 0;
-
- rev = check_sig(link);
- name = "???";
- if (rev > 0)
- switch (rev >> 4) {
- case 3: name = "92"; break;
- case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break;
- case 5: name = "95"; break;
- case 7: name = "100"; break;
- case 8: name = "100-FD"; break;
- case 9: name = "110"; break;
- }
-
- ioaddr = dev->base_addr;
- if (rev > 0) {
- u_long mcr;
- SMC_SELECT_BANK(0);
- mir = inw(ioaddr + MEMINFO) & 0xff;
- if (mir == 0xff) mir++;
- /* Get scale factor for memory size */
- mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
- mir *= 128 * (1<<((mcr >> 9) & 7));
- SMC_SELECT_BANK(1);
- smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
- smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
- if (smc->manfid == MANFID_OSITECH)
- smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
- if ((rev >> 4) >= 7)
- smc->cfg |= CFG_MII_SELECT;
- } else
- mir = 0;
-
- if (smc->cfg & CFG_MII_SELECT) {
- SMC_SELECT_BANK(3);
-
- for (i = 0; i < 32; i++) {
- j = mdio_read(dev, i, 1);
- if ((j != 0) && (j != 0xffff)) break;
- }
- smc->mii_if.phy_id = (i < 32) ? i : -1;
-
- SMC_SELECT_BANK(0);
- }
-
- SET_NETDEV_DEV(dev, &link->dev);
-
- if (register_netdev(dev) != 0) {
- dev_err(&link->dev, "register_netdev() failed\n");
- goto config_undo;
- }
-
- netdev_info(dev, "smc91c%s rev %d: io %#3lx, irq %d, hw_addr %pM\n",
- name, (rev & 0x0f), dev->base_addr, dev->irq, dev->dev_addr);
-
- if (rev > 0) {
- if (mir & 0x3ff)
- netdev_info(dev, " %lu byte", mir);
- else
- netdev_info(dev, " %lu kb", mir>>10);
- pr_cont(" buffer, %s xcvr\n",
- (smc->cfg & CFG_MII_SELECT) ? "MII" : if_names[dev->if_port]);
- }
-
- if (smc->cfg & CFG_MII_SELECT) {
- if (smc->mii_if.phy_id != -1) {
- netdev_dbg(dev, " MII transceiver at index %d, status %x\n",
- smc->mii_if.phy_id, j);
- } else {
- netdev_notice(dev, " No MII transceivers found!\n");
- }
- }
- return 0;
-
-config_undo:
- unregister_netdev(dev);
-config_failed:
- smc91c92_release(link);
- free_netdev(dev);
- return -ENODEV;
-} /* smc91c92_config */
-
-static void smc91c92_release(struct pcmcia_device *link)
-{
- dev_dbg(&link->dev, "smc91c92_release\n");
- if (link->resource[2]->end) {
- struct net_device *dev = link->priv;
- struct smc_private *smc = netdev_priv(dev);
- iounmap(smc->base);
- }
- pcmcia_disable_device(link);
-}
-
-/*======================================================================
-
- MII interface support for SMC91cXX based cards
-======================================================================*/
-
-#define MDIO_SHIFT_CLK 0x04
-#define MDIO_DATA_OUT 0x01
-#define MDIO_DIR_WRITE 0x08
-#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
-#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
-#define MDIO_DATA_READ 0x02
-
-static void mdio_sync(unsigned int addr)
-{
- int bits;
- for (bits = 0; bits < 32; bits++) {
- outb(MDIO_DATA_WRITE1, addr);
- outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
- }
-}
-
-static int mdio_read(struct net_device *dev, int phy_id, int loc)
-{
- unsigned int addr = dev->base_addr + MGMT;
- u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
- int i, retval = 0;
-
- mdio_sync(addr);
- for (i = 13; i >= 0; i--) {
- int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
- outb(dat, addr);
- outb(dat | MDIO_SHIFT_CLK, addr);
- }
- for (i = 19; i > 0; i--) {
- outb(0, addr);
- retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
- outb(MDIO_SHIFT_CLK, addr);
- }
- return (retval>>1) & 0xffff;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
-{
- unsigned int addr = dev->base_addr + MGMT;
- u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
- int i;
-
- mdio_sync(addr);
- for (i = 31; i >= 0; i--) {
- int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
- outb(dat, addr);
- outb(dat | MDIO_SHIFT_CLK, addr);
- }
- for (i = 1; i >= 0; i--) {
- outb(0, addr);
- outb(MDIO_SHIFT_CLK, addr);
- }
-}
-
-/*======================================================================
-
- The driver core code, most of which should be common with a
- non-PCMCIA implementation.
-
-======================================================================*/
-
-#ifdef PCMCIA_DEBUG
-static void smc_dump(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- u_short i, w, save;
- save = inw(ioaddr + BANK_SELECT);
- for (w = 0; w < 4; w++) {
- SMC_SELECT_BANK(w);
- netdev_dbg(dev, "bank %d: ", w);
- for (i = 0; i < 14; i += 2)
- pr_cont(" %04x", inw(ioaddr + i));
- pr_cont("\n");
- }
- outw(save, ioaddr + BANK_SELECT);
-}
-#endif
-
-static int smc_open(struct net_device *dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- struct pcmcia_device *link = smc->p_dev;
-
- dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n",
- dev->name, dev, inw(dev->base_addr + BANK_SELECT));
-#ifdef PCMCIA_DEBUG
- smc_dump(dev);
-#endif
-
- /* Check that the PCMCIA card is still here. */
- if (!pcmcia_dev_present(link))
- return -ENODEV;
- /* Physical device present signature. */
- if (check_sig(link) < 0) {
- netdev_info(dev, "Yikes! Bad chip signature!\n");
- return -ENODEV;
- }
- link->open++;
-
- netif_start_queue(dev);
- smc->saved_skb = NULL;
- smc->packets_waiting = 0;
-
- smc_reset(dev);
- timer_setup(&smc->media, media_check, 0);
- mod_timer(&smc->media, jiffies + HZ);
-
- return 0;
-} /* smc_open */
-
-/*====================================================================*/
-
-static int smc_close(struct net_device *dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- struct pcmcia_device *link = smc->p_dev;
- unsigned int ioaddr = dev->base_addr;
-
- dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n",
- dev->name, inw(ioaddr + BANK_SELECT));
-
- netif_stop_queue(dev);
-
- /* Shut off all interrupts, and turn off the Tx and Rx sections.
- Don't bother to check for chip present. */
- SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */
- outw(0, ioaddr + INTERRUPT);
- SMC_SELECT_BANK(0);
- mask_bits(0xff00, ioaddr + RCR);
- mask_bits(0xff00, ioaddr + TCR);
-
- /* Put the chip into power-down mode. */
- SMC_SELECT_BANK(1);
- outw(CTL_POWERDOWN, ioaddr + CONTROL );
-
- link->open--;
- timer_delete_sync(&smc->media);
-
- return 0;
-} /* smc_close */
-
-/*======================================================================
-
- Transfer a packet to the hardware and trigger the packet send.
- This may be called at either from either the Tx queue code
- or the interrupt handler.
-
-======================================================================*/
-
-static void smc_hardware_send_packet(struct net_device * dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- struct sk_buff *skb = smc->saved_skb;
- unsigned int ioaddr = dev->base_addr;
- u_char packet_no;
-
- if (!skb) {
- netdev_err(dev, "In XMIT with no packet to send\n");
- return;
- }
-
- /* There should be a packet slot waiting. */
- packet_no = inw(ioaddr + PNR_ARR) >> 8;
- if (packet_no & 0x80) {
- /* If not, there is a hardware problem! Likely an ejected card. */
- netdev_warn(dev, "hardware Tx buffer allocation failed, status %#2.2x\n",
- packet_no);
- dev_kfree_skb_irq(skb);
- smc->saved_skb = NULL;
- netif_start_queue(dev);
- return;
- }
-
- dev->stats.tx_bytes += skb->len;
- /* The card should use the just-allocated buffer. */
- outw(packet_no, ioaddr + PNR_ARR);
- /* point to the beginning of the packet */
- outw(PTR_AUTOINC , ioaddr + POINTER);
-
- /* Send the packet length (+6 for status, length and ctl byte)
- and the status word (set to zeros). */
- {
- u_char *buf = skb->data;
- u_int length = skb->len; /* The chip will pad to ethernet min. */
-
- netdev_dbg(dev, "Trying to xmit packet of length %d\n", length);
-
- /* send the packet length: +6 for status word, length, and ctl */
- outw(0, ioaddr + DATA_1);
- outw(length + 6, ioaddr + DATA_1);
- outsw(ioaddr + DATA_1, buf, length >> 1);
-
- /* The odd last byte, if there is one, goes in the control word. */
- outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1);
- }
-
- /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */
- outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) |
- (inw(ioaddr + INTERRUPT) & 0xff00),
- ioaddr + INTERRUPT);
-
- /* The chip does the rest of the work. */
- outw(MC_ENQUEUE , ioaddr + MMU_CMD);
-
- smc->saved_skb = NULL;
- dev_kfree_skb_irq(skb);
- netif_trans_update(dev);
- netif_start_queue(dev);
-}
-
-/*====================================================================*/
-
-static void smc_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
-
- netdev_notice(dev, "transmit timed out, Tx_status %2.2x status %4.4x.\n",
- inw(ioaddr)&0xff, inw(ioaddr + 2));
- dev->stats.tx_errors++;
- smc_reset(dev);
- netif_trans_update(dev); /* prevent tx timeout */
- smc->saved_skb = NULL;
- netif_wake_queue(dev);
-}
-
-static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- u_short num_pages;
- short time_out, ir;
- unsigned long flags;
-
- netif_stop_queue(dev);
-
- netdev_dbg(dev, "smc_start_xmit(length = %d) called, status %04x\n",
- skb->len, inw(ioaddr + 2));
-
- if (smc->saved_skb) {
- /* THIS SHOULD NEVER HAPPEN. */
- dev->stats.tx_aborted_errors++;
- netdev_dbg(dev, "Internal error -- sent packet while busy\n");
- return NETDEV_TX_BUSY;
- }
- smc->saved_skb = skb;
-
- num_pages = skb->len >> 8;
-
- if (num_pages > 7) {
- netdev_err(dev, "Far too big packet error: %d pages\n", num_pages);
- dev_kfree_skb (skb);
- smc->saved_skb = NULL;
- dev->stats.tx_dropped++;
- return NETDEV_TX_OK; /* Do not re-queue this packet. */
- }
- /* A packet is now waiting. */
- smc->packets_waiting++;
-
- spin_lock_irqsave(&smc->lock, flags);
- SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */
-
- /* need MC_RESET to keep the memory consistent. errata? */
- if (smc->rx_ovrn) {
- outw(MC_RESET, ioaddr + MMU_CMD);
- smc->rx_ovrn = 0;
- }
-
- /* Allocate the memory; send the packet now if we win. */
- outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD);
- for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) {
- ir = inw(ioaddr+INTERRUPT);
- if (ir & IM_ALLOC_INT) {
- /* Acknowledge the interrupt, send the packet. */
- outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
- smc_hardware_send_packet(dev); /* Send the packet now.. */
- spin_unlock_irqrestore(&smc->lock, flags);
- return NETDEV_TX_OK;
- }
- }
-
- /* Otherwise defer until the Tx-space-allocated interrupt. */
- netdev_dbg(dev, "memory allocation deferred.\n");
- outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
- spin_unlock_irqrestore(&smc->lock, flags);
-
- return NETDEV_TX_OK;
-}
-
-/*======================================================================
-
- Handle a Tx anomalous event. Entered while in Window 2.
-
-======================================================================*/
-
-static void smc_tx_err(struct net_device * dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- int saved_packet = inw(ioaddr + PNR_ARR) & 0xff;
- int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f;
- int tx_status;
-
- /* select this as the packet to read from */
- outw(packet_no, ioaddr + PNR_ARR);
-
- /* read the first word from this packet */
- outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER);
-
- tx_status = inw(ioaddr + DATA_1);
-
- dev->stats.tx_errors++;
- if (tx_status & TS_LOSTCAR) dev->stats.tx_carrier_errors++;
- if (tx_status & TS_LATCOL) dev->stats.tx_window_errors++;
- if (tx_status & TS_16COL) {
- dev->stats.tx_aborted_errors++;
- smc->tx_err++;
- }
-
- if (tx_status & TS_SUCCESS) {
- netdev_notice(dev, "Successful packet caused error interrupt?\n");
- }
- /* re-enable transmit */
- SMC_SELECT_BANK(0);
- outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
- SMC_SELECT_BANK(2);
-
- outw(MC_FREEPKT, ioaddr + MMU_CMD); /* Free the packet memory. */
-
- /* one less packet waiting for me */
- smc->packets_waiting--;
-
- outw(saved_packet, ioaddr + PNR_ARR);
-}
-
-/*====================================================================*/
-
-static void smc_eph_irq(struct net_device *dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- u_short card_stats, ephs;
-
- SMC_SELECT_BANK(0);
- ephs = inw(ioaddr + EPH);
- netdev_dbg(dev, "Ethernet protocol handler interrupt, status %4.4x.\n",
- ephs);
- /* Could be a counter roll-over warning: update stats. */
- card_stats = inw(ioaddr + COUNTER);
- /* single collisions */
- dev->stats.collisions += card_stats & 0xF;
- card_stats >>= 4;
- /* multiple collisions */
- dev->stats.collisions += card_stats & 0xF;
-#if 0 /* These are for when linux supports these statistics */
- card_stats >>= 4; /* deferred */
- card_stats >>= 4; /* excess deferred */
-#endif
- /* If we had a transmit error we must re-enable the transmitter. */
- outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
-
- /* Clear a link error interrupt. */
- SMC_SELECT_BANK(1);
- outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL);
- outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
- ioaddr + CONTROL);
- SMC_SELECT_BANK(2);
-}
-
-/*====================================================================*/
-
-static irqreturn_t smc_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr;
- u_short saved_bank, saved_pointer, mask, status;
- unsigned int handled = 1;
- char bogus_cnt = INTR_WORK; /* Work we are willing to do. */
-
- if (!netif_device_present(dev))
- return IRQ_NONE;
-
- ioaddr = dev->base_addr;
-
- netdev_dbg(dev, "SMC91c92 interrupt %d at %#x.\n",
- irq, ioaddr);
-
- spin_lock(&smc->lock);
- smc->watchdog = 0;
- saved_bank = inw(ioaddr + BANK_SELECT);
- if ((saved_bank & 0xff00) != 0x3300) {
- /* The device does not exist -- the card could be off-line, or
- maybe it has been ejected. */
- netdev_dbg(dev, "SMC91c92 interrupt %d for non-existent/ejected device.\n",
- irq);
- handled = 0;
- goto irq_done;
- }
-
- SMC_SELECT_BANK(2);
- saved_pointer = inw(ioaddr + POINTER);
- mask = inw(ioaddr + INTERRUPT) >> 8;
- /* clear all interrupts */
- outw(0, ioaddr + INTERRUPT);
-
- do { /* read the status flag, and mask it */
- status = inw(ioaddr + INTERRUPT) & 0xff;
- netdev_dbg(dev, "Status is %#2.2x (mask %#2.2x).\n",
- status, mask);
- if ((status & mask) == 0) {
- if (bogus_cnt == INTR_WORK)
- handled = 0;
- break;
- }
- if (status & IM_RCV_INT) {
- /* Got a packet(s). */
- smc_rx(dev);
- }
- if (status & IM_TX_INT) {
- smc_tx_err(dev);
- outw(IM_TX_INT, ioaddr + INTERRUPT);
- }
- status &= mask;
- if (status & IM_TX_EMPTY_INT) {
- outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT);
- mask &= ~IM_TX_EMPTY_INT;
- dev->stats.tx_packets += smc->packets_waiting;
- smc->packets_waiting = 0;
- }
- if (status & IM_ALLOC_INT) {
- /* Clear this interrupt so it doesn't happen again */
- mask &= ~IM_ALLOC_INT;
-
- smc_hardware_send_packet(dev);
-
- /* enable xmit interrupts based on this */
- mask |= (IM_TX_EMPTY_INT | IM_TX_INT);
-
- /* and let the card send more packets to me */
- netif_wake_queue(dev);
- }
- if (status & IM_RX_OVRN_INT) {
- dev->stats.rx_errors++;
- dev->stats.rx_fifo_errors++;
- if (smc->duplex)
- smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */
- outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT);
- }
- if (status & IM_EPH_INT)
- smc_eph_irq(dev);
- } while (--bogus_cnt);
-
- netdev_dbg(dev, " Restoring saved registers mask %2.2x bank %4.4x pointer %4.4x.\n",
- mask, saved_bank, saved_pointer);
-
- /* restore state register */
- outw((mask<<8), ioaddr + INTERRUPT);
- outw(saved_pointer, ioaddr + POINTER);
- SMC_SELECT_BANK(saved_bank);
-
- netdev_dbg(dev, "Exiting interrupt IRQ%d.\n", irq);
-
-irq_done:
-
- if ((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid != PRODID_OSITECH_SEVEN)) {
- /* Retrigger interrupt if needed */
- mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR);
- set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR);
- }
- if (smc->manfid == MANFID_MOTOROLA) {
- u_char cor;
- cor = readb(smc->base + MOT_UART + CISREG_COR);
- writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR);
- writeb(cor, smc->base + MOT_UART + CISREG_COR);
- cor = readb(smc->base + MOT_LAN + CISREG_COR);
- writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
- writeb(cor, smc->base + MOT_LAN + CISREG_COR);
- }
-
- if ((smc->base != NULL) && /* Megahertz MFC's */
- (smc->manfid == MANFID_MEGAHERTZ) &&
- (smc->cardid == PRODID_MEGAHERTZ_EM3288)) {
-
- u_char tmp;
- tmp = readb(smc->base+MEGAHERTZ_ISR);
- tmp = readb(smc->base+MEGAHERTZ_ISR);
-
- /* Retrigger interrupt if needed */
- writeb(tmp, smc->base + MEGAHERTZ_ISR);
- writeb(tmp, smc->base + MEGAHERTZ_ISR);
- }
-
- spin_unlock(&smc->lock);
- return IRQ_RETVAL(handled);
-}
-
-/*====================================================================*/
-
-static void smc_rx(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- int rx_status;
- int packet_length; /* Caution: not frame length, rather words
- to transfer from the chip. */
-
- /* Assertion: we are in Window 2. */
-
- if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
- netdev_err(dev, "smc_rx() with nothing on Rx FIFO\n");
- return;
- }
-
- /* Reset the read pointer, and read the status and packet length. */
- outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER);
- rx_status = inw(ioaddr + DATA_1);
- packet_length = inw(ioaddr + DATA_1) & 0x07ff;
-
- netdev_dbg(dev, "Receive status %4.4x length %d.\n",
- rx_status, packet_length);
-
- if (!(rx_status & RS_ERRORS)) {
- /* do stuff to make a new packet */
- struct sk_buff *skb;
- struct smc_private *smc = netdev_priv(dev);
-
- /* Note: packet_length adds 5 or 6 extra bytes here! */
- skb = netdev_alloc_skb(dev, packet_length+2);
-
- if (skb == NULL) {
- netdev_dbg(dev, "Low memory, packet dropped.\n");
- dev->stats.rx_dropped++;
- outw(MC_RELEASE, ioaddr + MMU_CMD);
- return;
- }
-
- packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6);
- skb_reserve(skb, 2);
- insw(ioaddr+DATA_1, skb_put(skb, packet_length),
- (packet_length+1)>>1);
- skb->protocol = eth_type_trans(skb, dev);
-
- netif_rx(skb);
- smc->last_rx = jiffies;
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += packet_length;
- if (rx_status & RS_MULTICAST)
- dev->stats.multicast++;
- } else {
- /* error ... */
- dev->stats.rx_errors++;
-
- if (rx_status & RS_ALGNERR) dev->stats.rx_frame_errors++;
- if (rx_status & (RS_TOOSHORT | RS_TOOLONG))
- dev->stats.rx_length_errors++;
- if (rx_status & RS_BADCRC) dev->stats.rx_crc_errors++;
- }
- /* Let the MMU free the memory of this packet. */
- outw(MC_RELEASE, ioaddr + MMU_CMD);
-}
-
-/*======================================================================
-
- Set the receive mode.
-
- This routine is used by both the protocol level to notify us of
- promiscuous/multicast mode changes, and by the open/reset code to
- initialize the Rx registers. We always set the multicast list and
- leave the receiver running.
-
-======================================================================*/
-
-static void set_rx_mode(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- struct smc_private *smc = netdev_priv(dev);
- unsigned char multicast_table[8];
- unsigned long flags;
- u_short rx_cfg_setting;
- int i;
-
- memset(multicast_table, 0, sizeof(multicast_table));
-
- if (dev->flags & IFF_PROMISC) {
- rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
- } else if (dev->flags & IFF_ALLMULTI)
- rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
- else {
- if (!netdev_mc_empty(dev)) {
- struct netdev_hw_addr *ha;
-
- netdev_for_each_mc_addr(ha, dev) {
- u_int position = ether_crc(6, ha->addr);
- multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
- }
- }
- rx_cfg_setting = RxStripCRC | RxEnable;
- }
-
- /* Load MC table and Rx setting into the chip without interrupts. */
- spin_lock_irqsave(&smc->lock, flags);
- SMC_SELECT_BANK(3);
- for (i = 0; i < 8; i++)
- outb(multicast_table[i], ioaddr + MULTICAST0 + i);
- SMC_SELECT_BANK(0);
- outw(rx_cfg_setting, ioaddr + RCR);
- SMC_SELECT_BANK(2);
- spin_unlock_irqrestore(&smc->lock, flags);
-}
-
-/*======================================================================
-
- Senses when a card's config changes. Here, it's coax or TP.
-
-======================================================================*/
-
-static int s9k_config(struct net_device *dev, struct ifmap *map)
-{
- struct smc_private *smc = netdev_priv(dev);
- if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
- if (smc->cfg & CFG_MII_SELECT)
- return -EOPNOTSUPP;
- else if (map->port > 2)
- return -EINVAL;
- WRITE_ONCE(dev->if_port, map->port);
- netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
- smc_reset(dev);
- }
- return 0;
-}
-
-/*======================================================================
-
- Reset the chip, reloading every register that might be corrupted.
-
-======================================================================*/
-
-/*
- Set transceiver type, perhaps to something other than what the user
- specified in dev->if_port.
-*/
-static void smc_set_xcvr(struct net_device *dev, int if_port)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- u_short saved_bank;
-
- saved_bank = inw(ioaddr + BANK_SELECT);
- SMC_SELECT_BANK(1);
- if (if_port == 2) {
- outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG);
- if ((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid != PRODID_OSITECH_SEVEN))
- set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
- smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002);
- } else {
- outw(smc->cfg, ioaddr + CONFIG);
- if ((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid != PRODID_OSITECH_SEVEN))
- mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
- smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001);
- }
- SMC_SELECT_BANK(saved_bank);
-}
-
-static void smc_reset(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- struct smc_private *smc = netdev_priv(dev);
- int i;
-
- netdev_dbg(dev, "smc91c92 reset called.\n");
-
- /* The first interaction must be a write to bring the chip out
- of sleep mode. */
- SMC_SELECT_BANK(0);
- /* Reset the chip. */
- outw(RCR_SOFTRESET, ioaddr + RCR);
- udelay(10);
-
- /* Clear the transmit and receive configuration registers. */
- outw(RCR_CLEAR, ioaddr + RCR);
- outw(TCR_CLEAR, ioaddr + TCR);
-
- /* Set the Window 1 control, configuration and station addr registers.
- No point in writing the I/O base register ;-> */
- SMC_SELECT_BANK(1);
- /* Automatically release successfully transmitted packets,
- Accept link errors, counter and Tx error interrupts. */
- outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
- ioaddr + CONTROL);
- smc_set_xcvr(dev, dev->if_port);
- if ((smc->manfid == MANFID_OSITECH) &&
- (smc->cardid != PRODID_OSITECH_SEVEN))
- outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) |
- (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00),
- ioaddr - 0x10 + OSITECH_AUI_PWR);
-
- /* Fill in the physical address. The databook is wrong about the order! */
- for (i = 0; i < 6; i += 2)
- outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i],
- ioaddr + ADDR0 + i);
-
- /* Reset the MMU */
- SMC_SELECT_BANK(2);
- outw(MC_RESET, ioaddr + MMU_CMD);
- outw(0, ioaddr + INTERRUPT);
-
- /* Re-enable the chip. */
- SMC_SELECT_BANK(0);
- outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) |
- TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR);
- set_rx_mode(dev);
-
- if (smc->cfg & CFG_MII_SELECT) {
- SMC_SELECT_BANK(3);
-
- /* Reset MII */
- mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000);
-
- /* Advertise 100F, 100H, 10F, 10H */
- mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1);
-
- /* Restart MII autonegotiation */
- mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000);
- mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200);
- }
-
- /* Enable interrupts. */
- SMC_SELECT_BANK(2);
- outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8,
- ioaddr + INTERRUPT);
-}
-
-/*======================================================================
-
- Media selection timer routine
-
-======================================================================*/
-
-static void media_check(struct timer_list *t)
-{
- struct smc_private *smc = timer_container_of(smc, t, media);
- struct net_device *dev = smc->mii_if.dev;
- unsigned int ioaddr = dev->base_addr;
- u_short i, media, saved_bank;
- u_short link;
- unsigned long flags;
-
- spin_lock_irqsave(&smc->lock, flags);
-
- saved_bank = inw(ioaddr + BANK_SELECT);
-
- if (!netif_device_present(dev))
- goto reschedule;
-
- SMC_SELECT_BANK(2);
-
- /* need MC_RESET to keep the memory consistent. errata? */
- if (smc->rx_ovrn) {
- outw(MC_RESET, ioaddr + MMU_CMD);
- smc->rx_ovrn = 0;
- }
- i = inw(ioaddr + INTERRUPT);
- SMC_SELECT_BANK(0);
- media = inw(ioaddr + EPH) & EPH_LINK_OK;
- SMC_SELECT_BANK(1);
- media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
-
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
-
- /* Check for pending interrupt with watchdog flag set: with
- this, we can limp along even if the interrupt is blocked */
- if (smc->watchdog++ && ((i>>8) & i)) {
- if (!smc->fast_poll)
- netdev_info(dev, "interrupt(s) dropped!\n");
- local_irq_save(flags);
- smc_interrupt(dev->irq, dev);
- local_irq_restore(flags);
- smc->fast_poll = HZ;
- }
- if (smc->fast_poll) {
- smc->fast_poll--;
- smc->media.expires = jiffies + HZ/100;
- add_timer(&smc->media);
- return;
- }
-
- spin_lock_irqsave(&smc->lock, flags);
-
- saved_bank = inw(ioaddr + BANK_SELECT);
-
- if (smc->cfg & CFG_MII_SELECT) {
- if (smc->mii_if.phy_id < 0)
- goto reschedule;
-
- SMC_SELECT_BANK(3);
- link = mdio_read(dev, smc->mii_if.phy_id, 1);
- if (!link || (link == 0xffff)) {
- netdev_info(dev, "MII is missing!\n");
- smc->mii_if.phy_id = -1;
- goto reschedule;
- }
-
- link &= 0x0004;
- if (link != smc->link_status) {
- u_short p = mdio_read(dev, smc->mii_if.phy_id, 5);
- netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
- smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
- ? TCR_FDUPLX : 0);
- if (link) {
- netdev_info(dev, "autonegotiation complete: "
- "%dbaseT-%cD selected\n",
- (p & 0x0180) ? 100 : 10, smc->duplex ? 'F' : 'H');
- }
- SMC_SELECT_BANK(0);
- outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
- smc->link_status = link;
- }
- goto reschedule;
- }
-
- /* Ignore collisions unless we've had no rx's recently */
- if (time_after(jiffies, smc->last_rx + HZ)) {
- if (smc->tx_err || (smc->media_status & EPH_16COL))
- media |= EPH_16COL;
- }
- smc->tx_err = 0;
-
- if (media != smc->media_status) {
- if ((media & smc->media_status & 1) &&
- ((smc->media_status ^ media) & EPH_LINK_OK))
- netdev_info(dev, "%s link beat\n",
- smc->media_status & EPH_LINK_OK ? "lost" : "found");
- else if ((media & smc->media_status & 2) &&
- ((smc->media_status ^ media) & EPH_16COL))
- netdev_info(dev, "coax cable %s\n",
- media & EPH_16COL ? "problem" : "ok");
- if (dev->if_port == 0) {
- if (media & 1) {
- if (media & EPH_LINK_OK)
- netdev_info(dev, "flipped to 10baseT\n");
- else
- smc_set_xcvr(dev, 2);
- } else {
- if (media & EPH_16COL)
- smc_set_xcvr(dev, 1);
- else
- netdev_info(dev, "flipped to 10base2\n");
- }
- }
- smc->media_status = media;
- }
-
-reschedule:
- smc->media.expires = jiffies + HZ;
- add_timer(&smc->media);
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
-}
-
-static int smc_link_ok(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- struct smc_private *smc = netdev_priv(dev);
-
- if (smc->cfg & CFG_MII_SELECT) {
- return mii_link_ok(&smc->mii_if);
- } else {
- SMC_SELECT_BANK(0);
- return inw(ioaddr + EPH) & EPH_LINK_OK;
- }
-}
-
-static void smc_netdev_get_ecmd(struct net_device *dev,
- struct ethtool_link_ksettings *ecmd)
-{
- u16 tmp;
- unsigned int ioaddr = dev->base_addr;
- u32 supported;
-
- supported = (SUPPORTED_TP | SUPPORTED_AUI |
- SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full);
-
- SMC_SELECT_BANK(1);
- tmp = inw(ioaddr + CONFIG);
- ecmd->base.port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
- ecmd->base.speed = SPEED_10;
- ecmd->base.phy_address = ioaddr + MGMT;
-
- SMC_SELECT_BANK(0);
- tmp = inw(ioaddr + TCR);
- ecmd->base.duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF;
-
- ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
- supported);
-}
-
-static int smc_netdev_set_ecmd(struct net_device *dev,
- const struct ethtool_link_ksettings *ecmd)
-{
- u16 tmp;
- unsigned int ioaddr = dev->base_addr;
-
- if (ecmd->base.speed != SPEED_10)
- return -EINVAL;
- if (ecmd->base.duplex != DUPLEX_HALF &&
- ecmd->base.duplex != DUPLEX_FULL)
- return -EINVAL;
- if (ecmd->base.port != PORT_TP && ecmd->base.port != PORT_AUI)
- return -EINVAL;
-
- if (ecmd->base.port == PORT_AUI)
- smc_set_xcvr(dev, 1);
- else
- smc_set_xcvr(dev, 0);
-
- SMC_SELECT_BANK(0);
- tmp = inw(ioaddr + TCR);
- if (ecmd->base.duplex == DUPLEX_FULL)
- tmp |= TCR_FDUPLX;
- else
- tmp &= ~TCR_FDUPLX;
- outw(tmp, ioaddr + TCR);
-
- return 0;
-}
-
-static int check_if_running(struct net_device *dev)
-{
- if (!netif_running(dev))
- return -EINVAL;
- return 0;
-}
-
-static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- strscpy(info->driver, DRV_NAME, sizeof(info->driver));
- strscpy(info->version, DRV_VERSION, sizeof(info->version));
-}
-
-static int smc_get_link_ksettings(struct net_device *dev,
- struct ethtool_link_ksettings *ecmd)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- u16 saved_bank = inw(ioaddr + BANK_SELECT);
- unsigned long flags;
-
- spin_lock_irqsave(&smc->lock, flags);
- SMC_SELECT_BANK(3);
- if (smc->cfg & CFG_MII_SELECT)
- mii_ethtool_get_link_ksettings(&smc->mii_if, ecmd);
- else
- smc_netdev_get_ecmd(dev, ecmd);
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
- return 0;
-}
-
-static int smc_set_link_ksettings(struct net_device *dev,
- const struct ethtool_link_ksettings *ecmd)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- u16 saved_bank = inw(ioaddr + BANK_SELECT);
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&smc->lock, flags);
- SMC_SELECT_BANK(3);
- if (smc->cfg & CFG_MII_SELECT)
- ret = mii_ethtool_set_link_ksettings(&smc->mii_if, ecmd);
- else
- ret = smc_netdev_set_ecmd(dev, ecmd);
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
- return ret;
-}
-
-static u32 smc_get_link(struct net_device *dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- u16 saved_bank = inw(ioaddr + BANK_SELECT);
- u32 ret;
- unsigned long flags;
-
- spin_lock_irqsave(&smc->lock, flags);
- SMC_SELECT_BANK(3);
- ret = smc_link_ok(dev);
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
- return ret;
-}
-
-static int smc_nway_reset(struct net_device *dev)
-{
- struct smc_private *smc = netdev_priv(dev);
- if (smc->cfg & CFG_MII_SELECT) {
- unsigned int ioaddr = dev->base_addr;
- u16 saved_bank = inw(ioaddr + BANK_SELECT);
- int res;
-
- SMC_SELECT_BANK(3);
- res = mii_nway_restart(&smc->mii_if);
- SMC_SELECT_BANK(saved_bank);
-
- return res;
- } else
- return -EOPNOTSUPP;
-}
-
-static const struct ethtool_ops ethtool_ops = {
- .begin = check_if_running,
- .get_drvinfo = smc_get_drvinfo,
- .get_link = smc_get_link,
- .nway_reset = smc_nway_reset,
- .get_link_ksettings = smc_get_link_ksettings,
- .set_link_ksettings = smc_set_link_ksettings,
-};
-
-static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct smc_private *smc = netdev_priv(dev);
- struct mii_ioctl_data *mii = if_mii(rq);
- int rc = 0;
- u16 saved_bank;
- unsigned int ioaddr = dev->base_addr;
- unsigned long flags;
-
- if (!netif_running(dev))
- return -EINVAL;
-
- spin_lock_irqsave(&smc->lock, flags);
- saved_bank = inw(ioaddr + BANK_SELECT);
- SMC_SELECT_BANK(3);
- rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
- return rc;
-}
-
-static const struct pcmcia_device_id smc91c92_ids[] = {
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a),
- PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
- PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
- PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
- PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
- PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
- PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
- PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
- PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc),
- PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1),
- PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5),
- PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
- PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
- PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
- PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
- PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
- PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
- PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
- /* These conflict with other cards! */
- /* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */
- /* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids);
-
-static struct pcmcia_driver smc91c92_cs_driver = {
- .owner = THIS_MODULE,
- .name = "smc91c92_cs",
- .probe = smc91c92_probe,
- .remove = smc91c92_detach,
- .id_table = smc91c92_ids,
- .suspend = smc91c92_suspend,
- .resume = smc91c92_resume,
-};
-module_pcmcia_driver(smc91c92_cs_driver);
projects / thirdparty / linux.git / commitdiff
