]> git.ipfire.org Git - thirdparty/kernel/linux.git/commitdiff
dt-bindings: net: dwmac-sun8i: Clean up clock delay chain descriptions
authorChen-Yu Tsai <wens@csie.org>
Sun, 13 May 2018 19:14:18 +0000 (03:14 +0800)
committerDavid S. Miller <davem@davemloft.net>
Mon, 14 May 2018 19:06:53 +0000 (15:06 -0400)
The clock delay chains found in the glue layer for dwmac-sun8i are only
used with RGMII PHYs. They are not intended for non-RGMII PHYs, such as
MII external PHYs or the internal PHY. Also, a recent SoC has a smaller
range of possible values for the delay chain.

This patch reformats the delay chain section of the device tree binding
to make it clear that the delay chains only apply to RGMII PHYs, and
make it easier to add the R40-specific bits later.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/devicetree/bindings/net/dwmac-sun8i.txt

index 3d6d5fa0c4d5fc670d8bec94e53a0f07a0a2e013..e04ce75e24a3ca6ceff4ae1af61396347726ec8d 100644 (file)
@@ -28,10 +28,13 @@ Required properties:
   - allwinner,sun8i-a83t-system-controller
 
 Optional properties:
-- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
-- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
-Both delay properties need to be a multiple of 100. They control the delay for
-external PHY.
+- allwinner,tx-delay-ps: TX clock delay chain value in ps.
+                        Range is 0-700. Default is 0.
+- allwinner,rx-delay-ps: RX clock delay chain value in ps.
+                        Range is 0-3100. Default is 0.
+Both delay properties need to be a multiple of 100. They control the
+clock delay for external RGMII PHY. They do not apply to the internal
+PHY or external non-RGMII PHYs.
 
 Optional properties for the following compatibles:
   - "allwinner,sun8i-h3-emac",