--- /dev/null
+From 016002848c82eeb5d460489ce392d91fe18c475c Mon Sep 17 00:00:00 2001
+From: Zheyu Ma <zheyuma97@gmail.com>
+Date: Fri, 21 May 2021 06:08:43 +0000
+Subject: serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
+
+From: Zheyu Ma <zheyuma97@gmail.com>
+
+commit 016002848c82eeb5d460489ce392d91fe18c475c upstream.
+
+In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
+'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
+firmware don't exists, function just return without initializing ports
+of 'rp2_card'. But now the interrupt handler function has been
+registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
+those ports then causing NULL pointer dereference or other bugs.
+
+Because the driver does some initialization work in 'rp2_fw_cb', in
+order to make the driver ready to handle interrupts, 'request_firmware'
+should be used instead of asynchronous 'request_firmware_nowait'.
+
+This report reveals it:
+
+INFO: trying to register non-static key.
+the code is fine but needs lockdep annotation.
+turning off the locking correctness validator.
+CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
+Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
+gc9ba5276e321-prebuilt.qemu.org 04/01/2014
+Call Trace:
+ <IRQ>
+ __dump_stack lib/dump_stack.c:77 [inline]
+ dump_stack+0xec/0x156 lib/dump_stack.c:118
+ assign_lock_key kernel/locking/lockdep.c:727 [inline]
+ register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
+ __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
+ lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
+ __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
+ _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
+ spin_lock include/linux/spinlock.h:329 [inline]
+ rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
+ rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
+ rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
+ __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
+ handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
+ handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
+ handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
+ generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
+ handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
+ do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
+ common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
+ </IRQ>
+RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
+Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
+8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
+90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
+RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
+RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
+RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
+RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
+R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
+R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
+ arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
+ default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
+ arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
+ default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
+ cpuidle_idle_call kernel/sched/idle.c:153 [inline]
+ do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
+ cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
+ start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
+ secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
+BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
+PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
+Oops: 0000 [#1] PREEMPT SMP KASAN PTI
+CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
+Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
+gc9ba5276e321-prebuilt.qemu.org 04/01/2014
+RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
+RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
+RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
+493
+Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8
+03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1
+89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
+RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
+RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
+RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
+RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
+R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
+R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
+FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
+0000000000000000
+CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
+CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
+DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
+Call Trace:
+ <IRQ>
+ rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
+ __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
+ handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
+ handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
+ handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
+ generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
+ handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
+ do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
+ common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
+ </IRQ>
+RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
+Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7
+f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90
+90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
+RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
+RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
+RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
+RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
+R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
+R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
+ arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
+ default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
+ arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
+ default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
+ cpuidle_idle_call kernel/sched/idle.c:153 [inline]
+ do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
+ cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
+ start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
+ secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
+Modules linked in:
+Dumping ftrace buffer:
+ (ftrace buffer empty)
+CR2: 0000000000000010
+---[ end trace 11804dbb55cb1a64 ]---
+RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
+RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
+RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
+493
+Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1
+e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89
+c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
+RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
+RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
+RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
+RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
+R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
+R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
+FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
+0000000000000000
+CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
+CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
+DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
+
+Reported-by: Zheyu Ma <zheyuma97@gmail.com>
+Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
+Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com
+Cc: stable <stable@vger.kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/rp2.c | 52 +++++++++++++++--------------------------------
+ 1 file changed, 17 insertions(+), 35 deletions(-)
+
+--- a/drivers/tty/serial/rp2.c
++++ b/drivers/tty/serial/rp2.c
+@@ -198,7 +198,6 @@ struct rp2_card {
+ void __iomem *bar0;
+ void __iomem *bar1;
+ spinlock_t card_lock;
+- struct completion fw_loaded;
+ };
+
+ #define RP_ID(prod) PCI_VDEVICE(RP, (prod))
+@@ -667,17 +666,10 @@ static void rp2_remove_ports(struct rp2_
+ card->initialized_ports = 0;
+ }
+
+-static void rp2_fw_cb(const struct firmware *fw, void *context)
++static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
+ {
+- struct rp2_card *card = context;
+ resource_size_t phys_base;
+- int i, rc = -ENOENT;
+-
+- if (!fw) {
+- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
+- RP2_FW_NAME);
+- goto no_fw;
+- }
++ int i, rc = 0;
+
+ phys_base = pci_resource_start(card->pdev, 1);
+
+@@ -723,23 +715,13 @@ static void rp2_fw_cb(const struct firmw
+ card->initialized_ports++;
+ }
+
+- release_firmware(fw);
+-no_fw:
+- /*
+- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
+- * has already returned success. So if something failed here,
+- * we'll just leave the now-dormant device in place until somebody
+- * unbinds it.
+- */
+- if (rc)
+- dev_warn(&card->pdev->dev, "driver initialization failed\n");
+-
+- complete(&card->fw_loaded);
++ return rc;
+ }
+
+ static int rp2_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+ {
++ const struct firmware *fw;
+ struct rp2_card *card;
+ struct rp2_uart_port *ports;
+ void __iomem * const *bars;
+@@ -750,7 +732,6 @@ static int rp2_probe(struct pci_dev *pde
+ return -ENOMEM;
+ pci_set_drvdata(pdev, card);
+ spin_lock_init(&card->card_lock);
+- init_completion(&card->fw_loaded);
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+@@ -783,21 +764,23 @@ static int rp2_probe(struct pci_dev *pde
+ return -ENOMEM;
+ card->ports = ports;
+
+- rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+- IRQF_SHARED, DRV_NAME, card);
+- if (rc)
++ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
++ if (rc < 0) {
++ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
++ RP2_FW_NAME);
+ return rc;
++ }
+
+- /*
+- * Only catastrophic errors (e.g. ENOMEM) are reported here.
+- * If the FW image is missing, we'll find out in rp2_fw_cb()
+- * and print an error message.
+- */
+- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
+- GFP_KERNEL, card, rp2_fw_cb);
++ rc = rp2_load_firmware(card, fw);
++
++ release_firmware(fw);
++ if (rc < 0)
++ return rc;
++
++ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
++ IRQF_SHARED, DRV_NAME, card);
+ if (rc)
+ return rc;
+- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
+
+ return 0;
+ }
+@@ -806,7 +789,6 @@ static void rp2_remove(struct pci_dev *p
+ {
+ struct rp2_card *card = pci_get_drvdata(pdev);
+
+- wait_for_completion(&card->fw_loaded);
+ rp2_remove_ports(card);
+ }
+
--- /dev/null
+From 2ea2e019c190ee3973ef7bcaf829d8762e56e635 Mon Sep 17 00:00:00 2001
+From: Geert Uytterhoeven <geert+renesas@glider.be>
+Date: Mon, 10 May 2021 14:07:55 +0200
+Subject: serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
+
+From: Geert Uytterhoeven <geert+renesas@glider.be>
+
+commit 2ea2e019c190ee3973ef7bcaf829d8762e56e635 upstream.
+
+The Receive FIFO Data Count Trigger field (RTRG[6:0]) in the Receive
+FIFO Data Count Trigger Register (HSRTRGR) of HSCIF can only hold values
+ranging from 0-127. As the FIFO size is equal to 128 on HSCIF, the user
+can write an out-of-range value, touching reserved bits.
+
+Fix this by limiting the trigger value to the FIFO size minus one.
+Reverse the order of the checks, to avoid rx_trig becoming zero if the
+FIFO size is one.
+
+Note that this change has no impact on other SCIF variants, as their
+maximum supported trigger value is lower than the FIFO size anyway, and
+the code below takes care of enforcing these limits.
+
+Fixes: a380ed461f66d1b8 ("serial: sh-sci: implement FIFO threshold register setting")
+Reported-by: Linh Phung <linh.phung.jy@renesas.com>
+Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
+Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
+Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
+Cc: stable <stable@vger.kernel.org>
+Link: https://lore.kernel.org/r/5eff320aef92ffb33d00e57979fd3603bbb4a70f.1620648218.git.geert+renesas@glider.be
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/sh-sci.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/tty/serial/sh-sci.c
++++ b/drivers/tty/serial/sh-sci.c
+@@ -994,10 +994,10 @@ static int scif_set_rtrg(struct uart_por
+ {
+ unsigned int bits;
+
++ if (rx_trig >= port->fifosize)
++ rx_trig = port->fifosize - 1;
+ if (rx_trig < 1)
+ rx_trig = 1;
+- if (rx_trig >= port->fifosize)
+- rx_trig = port->fifosize;
+
+ /* HSCIF can be set to an arbitrary level. */
+ if (sci_getreg(port, HSRTRGR)->size) {
staging-iio-cdc-ad7746-avoid-overwrite-of-num_channels.patch
iio-adc-ad7793-add-missing-error-code-in-ad7793_setup.patch
usb-trancevibrator-fix-control-request-direction.patch
+serial-sh-sci-fix-off-by-one-error-in-fifo-threshold-register-setting.patch
+serial-rp2-use-request_firmware-instead-of-request_firmware_nowait.patch
+usb-serial-ti_usb_3410_5052-add-startech.com-device-id.patch
+usb-serial-option-add-telit-le910-s1-compositions-0x7010-0x7011.patch
+usb-serial-ftdi_sio-add-ids-for-ids-gmbh-products.patch
+usb-serial-pl2303-add-device-id-for-adlink-nd-6530-gc.patch
+usb-gadget-udc-renesas_usb3-fix-a-race-in-usb3_start_pipen.patch
--- /dev/null
+From e752dbc59e1241b13b8c4f7b6eb582862e7668fe Mon Sep 17 00:00:00 2001
+From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Date: Mon, 24 May 2021 15:01:55 +0900
+Subject: usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
+
+From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+commit e752dbc59e1241b13b8c4f7b6eb582862e7668fe upstream.
+
+The usb3_start_pipen() is called by renesas_usb3_ep_queue() and
+usb3_request_done_pipen() so that usb3_start_pipen() is possible
+to cause a race when getting usb3_first_req like below:
+
+renesas_usb3_ep_queue()
+ spin_lock_irqsave()
+ list_add_tail()
+ spin_unlock_irqrestore()
+ usb3_start_pipen()
+ usb3_first_req = usb3_get_request() --- [1]
+ --- interrupt ---
+ usb3_irq_dma_int()
+ usb3_request_done_pipen()
+ usb3_get_request()
+ usb3_start_pipen()
+ usb3_first_req = usb3_get_request()
+ ...
+ (the req is possible to be finished in the interrupt)
+
+The usb3_first_req [1] above may have been finished after the interrupt
+ended so that this driver caused to start a transfer wrongly. To fix this
+issue, getting/checking the usb3_first_req are under spin_lock_irqsave()
+in the same section.
+
+Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
+Cc: stable <stable@vger.kernel.org>
+Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Link: https://lore.kernel.org/r/20210524060155.1178724-1-yoshihiro.shimoda.uh@renesas.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/udc/renesas_usb3.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/gadget/udc/renesas_usb3.c
++++ b/drivers/usb/gadget/udc/renesas_usb3.c
+@@ -1442,7 +1442,7 @@ static void usb3_start_pipen(struct rene
+ struct renesas_usb3_request *usb3_req)
+ {
+ struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+- struct renesas_usb3_request *usb3_req_first = usb3_get_request(usb3_ep);
++ struct renesas_usb3_request *usb3_req_first;
+ unsigned long flags;
+ int ret = -EAGAIN;
+ u32 enable_bits = 0;
+@@ -1450,7 +1450,8 @@ static void usb3_start_pipen(struct rene
+ spin_lock_irqsave(&usb3->lock, flags);
+ if (usb3_ep->halt || usb3_ep->started)
+ goto out;
+- if (usb3_req != usb3_req_first)
++ usb3_req_first = __usb3_get_request(usb3_ep);
++ if (!usb3_req_first || usb3_req != usb3_req_first)
+ goto out;
+
+ if (usb3_pn_change(usb3, usb3_ep->num) < 0)
--- /dev/null
+From c5a80540e425a5f9a82b0f3163e3b6a4331f33bc Mon Sep 17 00:00:00 2001
+From: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
+Date: Thu, 22 Apr 2021 09:58:52 +0200
+Subject: USB: serial: ftdi_sio: add IDs for IDS GmbH Products
+
+From: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
+
+commit c5a80540e425a5f9a82b0f3163e3b6a4331f33bc upstream.
+
+Add the IDS GmbH Vendor ID and the Product IDs for SI31A (2xRS232)
+and CM31A (LoRaWAN Modem).
+
+Signed-off-by: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
+Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/ftdi_sio.c | 3 +++
+ drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++
+ 2 files changed, 10 insertions(+)
+
+--- a/drivers/usb/serial/ftdi_sio.c
++++ b/drivers/usb/serial/ftdi_sio.c
+@@ -1029,6 +1029,9 @@ static const struct usb_device_id id_tab
+ /* Sienna devices */
+ { USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
+ { USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
++ /* IDS GmbH devices */
++ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
++ { USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
+ /* U-Blox devices */
+ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
+ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
+--- a/drivers/usb/serial/ftdi_sio_ids.h
++++ b/drivers/usb/serial/ftdi_sio_ids.h
+@@ -1568,6 +1568,13 @@
+ #define UNJO_ISODEBUG_V1_PID 0x150D
+
+ /*
++ * IDS GmbH
++ */
++#define IDS_VID 0x2CAF
++#define IDS_SI31A_PID 0x13A2
++#define IDS_CM31A_PID 0x13A3
++
++/*
+ * U-Blox products (http://www.u-blox.com).
+ */
+ #define UBLOX_VID 0x1546
--- /dev/null
+From e467714f822b5d167a7fb03d34af91b5b6af1827 Mon Sep 17 00:00:00 2001
+From: Daniele Palmas <dnlplm@gmail.com>
+Date: Wed, 28 Apr 2021 09:26:34 +0200
+Subject: USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011
+
+From: Daniele Palmas <dnlplm@gmail.com>
+
+commit e467714f822b5d167a7fb03d34af91b5b6af1827 upstream.
+
+Add support for the following Telit LE910-S1 compositions:
+
+0x7010: rndis, tty, tty, tty
+0x7011: ecm, tty, tty, tty
+
+Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
+Link: https://lore.kernel.org/r/20210428072634.5091-1-dnlplm@gmail.com
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/option.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -1243,6 +1243,10 @@ static const struct usb_device_id option
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
+ .driver_info = NCTRL(0) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff), /* Telit LE910-S1 (RNDIS) */
++ .driver_info = NCTRL(2) },
++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
++ .driver_info = NCTRL(2) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
--- /dev/null
+From f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 Mon Sep 17 00:00:00 2001
+From: Zolton Jheng <s6668c2t@gmail.com>
+Date: Mon, 10 May 2021 10:32:00 +0800
+Subject: USB: serial: pl2303: add device id for ADLINK ND-6530 GC
+
+From: Zolton Jheng <s6668c2t@gmail.com>
+
+commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream.
+
+This adds the device id for the ADLINK ND-6530 which is a PL2303GC based
+device.
+
+Signed-off-by: Zolton Jheng <s6668c2t@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/pl2303.c | 1 +
+ drivers/usb/serial/pl2303.h | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/drivers/usb/serial/pl2303.c
++++ b/drivers/usb/serial/pl2303.c
+@@ -110,6 +110,7 @@ static const struct usb_device_id id_tab
+ { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+ { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
++ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
+ { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+ { USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
+ { } /* Terminating entry */
+--- a/drivers/usb/serial/pl2303.h
++++ b/drivers/usb/serial/pl2303.h
+@@ -157,6 +157,7 @@
+ /* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+ #define ADLINK_VENDOR_ID 0x0b63
+ #define ADLINK_ND6530_PRODUCT_ID 0x6530
++#define ADLINK_ND6530GC_PRODUCT_ID 0x653a
+
+ /* SMART USB Serial Adapter */
+ #define SMART_VENDOR_ID 0x0b8c
--- /dev/null
+From 89b1a3d811e6f8065d6ae8a25e7682329b4a31e2 Mon Sep 17 00:00:00 2001
+From: Sean MacLennan <seanm@seanm.ca>
+Date: Sat, 1 May 2021 20:40:45 -0400
+Subject: USB: serial: ti_usb_3410_5052: add startech.com device id
+
+From: Sean MacLennan <seanm@seanm.ca>
+
+commit 89b1a3d811e6f8065d6ae8a25e7682329b4a31e2 upstream.
+
+This adds support for the Startech.com generic serial to USB converter.
+It seems to be a bone stock TI_3410. I have been using this patch for
+years.
+
+Signed-off-by: Sean MacLennan <seanm@seanm.ca>
+Cc: stable@vger.kernel.org
+Signed-off-by: Johan Hovold <johan@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/serial/ti_usb_3410_5052.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/usb/serial/ti_usb_3410_5052.c
++++ b/drivers/usb/serial/ti_usb_3410_5052.c
+@@ -41,6 +41,7 @@
+ /* Vendor and product ids */
+ #define TI_VENDOR_ID 0x0451
+ #define IBM_VENDOR_ID 0x04b3
++#define STARTECH_VENDOR_ID 0x14b0
+ #define TI_3410_PRODUCT_ID 0x3410
+ #define IBM_4543_PRODUCT_ID 0x4543
+ #define IBM_454B_PRODUCT_ID 0x454b
+@@ -378,6 +379,7 @@ static const struct usb_device_id ti_id_
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
++ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
+ { } /* terminator */
+ };
+
+@@ -416,6 +418,7 @@ static const struct usb_device_id ti_id_
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
++ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
+ { } /* terminator */
+ };
+
projects / thirdparty / kernel / stable-queue.git / commitdiff
