--- /dev/null
+From f73a4230d5bbc8fc7e1a2479ac997f786111c7bb Mon Sep 17 00:00:00 2001
+From: Vinod Koul <vkoul@kernel.org>
+Date: Wed, 13 May 2020 12:24:19 +0530
+Subject: clk: qcom: gcc: Add GPU and NPU clocks for SM8150
+
+From: Vinod Koul <vkoul@kernel.org>
+
+commit f73a4230d5bbc8fc7e1a2479ac997f786111c7bb upstream.
+
+Add the GPU and NPU clocks for SM8150. They were missed in earlier
+addition of clock driver.
+
+Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150")
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Link: https://lkml.kernel.org/r/20200513065420.32735-1-vkoul@kernel.org
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/clk/qcom/gcc-sm8150.c | 64 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 64 insertions(+)
+
+--- a/drivers/clk/qcom/gcc-sm8150.c
++++ b/drivers/clk/qcom/gcc-sm8150.c
+@@ -1615,6 +1615,36 @@ static struct clk_branch gcc_gpu_cfg_ahb
+ },
+ };
+
++static struct clk_branch gcc_gpu_gpll0_clk_src = {
++ .clkr = {
++ .enable_reg = 0x52004,
++ .enable_mask = BIT(15),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_gpu_gpll0_clk_src",
++ .parent_hws = (const struct clk_hw *[]){
++ &gpll0.clkr.hw },
++ .num_parents = 1,
++ .flags = CLK_SET_RATE_PARENT,
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
++static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
++ .clkr = {
++ .enable_reg = 0x52004,
++ .enable_mask = BIT(16),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_gpu_gpll0_div_clk_src",
++ .parent_hws = (const struct clk_hw *[]){
++ &gcc_gpu_gpll0_clk_src.clkr.hw },
++ .num_parents = 1,
++ .flags = CLK_SET_RATE_PARENT,
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
+ static struct clk_branch gcc_gpu_iref_clk = {
+ .halt_reg = 0x8c010,
+ .halt_check = BRANCH_HALT,
+@@ -1697,6 +1727,36 @@ static struct clk_branch gcc_npu_cfg_ahb
+ },
+ };
+
++static struct clk_branch gcc_npu_gpll0_clk_src = {
++ .clkr = {
++ .enable_reg = 0x52004,
++ .enable_mask = BIT(18),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_npu_gpll0_clk_src",
++ .parent_hws = (const struct clk_hw *[]){
++ &gpll0.clkr.hw },
++ .num_parents = 1,
++ .flags = CLK_SET_RATE_PARENT,
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
++static struct clk_branch gcc_npu_gpll0_div_clk_src = {
++ .clkr = {
++ .enable_reg = 0x52004,
++ .enable_mask = BIT(19),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_npu_gpll0_div_clk_src",
++ .parent_hws = (const struct clk_hw *[]){
++ &gcc_npu_gpll0_clk_src.clkr.hw },
++ .num_parents = 1,
++ .flags = CLK_SET_RATE_PARENT,
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
+ static struct clk_branch gcc_npu_trig_clk = {
+ .halt_reg = 0x4d00c,
+ .halt_check = BRANCH_VOTED,
+@@ -3331,12 +3391,16 @@ static struct clk_regmap *gcc_sm8150_clo
+ [GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+ [GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
+ [GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
++ [GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
++ [GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
+ [GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr,
+ [GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
+ [GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr,
+ [GCC_NPU_AT_CLK] = &gcc_npu_at_clk.clkr,
+ [GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr,
+ [GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr,
++ [GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr,
++ [GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr,
+ [GCC_NPU_TRIG_CLK] = &gcc_npu_trig_clk.clkr,
+ [GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr,
+ [GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr,
--- /dev/null
+From 37c72e4cae37f0dace1abb3711ede7fbc6d0862a Mon Sep 17 00:00:00 2001
+From: Vinod Koul <vkoul@kernel.org>
+Date: Wed, 13 May 2020 12:24:20 +0530
+Subject: clk: qcom: gcc: Add missing UFS clocks for SM8150
+
+From: Vinod Koul <vkoul@kernel.org>
+
+commit 37c72e4cae37f0dace1abb3711ede7fbc6d0862a upstream.
+
+Add the missing ufs card and ufs phy clocks for SM8150. They were missed
+in earlier addition of clock driver.
+
+Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150")
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Link: https://lkml.kernel.org/r/20200513065420.32735-2-vkoul@kernel.org
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/clk/qcom/gcc-sm8150.c | 84 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 84 insertions(+)
+
+--- a/drivers/clk/qcom/gcc-sm8150.c
++++ b/drivers/clk/qcom/gcc-sm8150.c
+@@ -2871,6 +2871,45 @@ static struct clk_branch gcc_ufs_card_ph
+ },
+ };
+
++/* external clocks so add BRANCH_HALT_SKIP */
++static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = {
++ .halt_check = BRANCH_HALT_SKIP,
++ .clkr = {
++ .enable_reg = 0x7501c,
++ .enable_mask = BIT(0),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_ufs_card_rx_symbol_0_clk",
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
++/* external clocks so add BRANCH_HALT_SKIP */
++static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = {
++ .halt_check = BRANCH_HALT_SKIP,
++ .clkr = {
++ .enable_reg = 0x750ac,
++ .enable_mask = BIT(0),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_ufs_card_rx_symbol_1_clk",
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
++/* external clocks so add BRANCH_HALT_SKIP */
++static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = {
++ .halt_check = BRANCH_HALT_SKIP,
++ .clkr = {
++ .enable_reg = 0x75018,
++ .enable_mask = BIT(0),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_ufs_card_tx_symbol_0_clk",
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
+ static struct clk_branch gcc_ufs_card_unipro_core_clk = {
+ .halt_reg = 0x75058,
+ .halt_check = BRANCH_HALT,
+@@ -3051,6 +3090,45 @@ static struct clk_branch gcc_ufs_phy_phy
+ },
+ };
+
++/* external clocks so add BRANCH_HALT_SKIP */
++static struct clk_branch gcc_ufs_phy_rx_symbol_0_clk = {
++ .halt_check = BRANCH_HALT_SKIP,
++ .clkr = {
++ .enable_reg = 0x7701c,
++ .enable_mask = BIT(0),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_ufs_phy_rx_symbol_0_clk",
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
++/* external clocks so add BRANCH_HALT_SKIP */
++static struct clk_branch gcc_ufs_phy_rx_symbol_1_clk = {
++ .halt_check = BRANCH_HALT_SKIP,
++ .clkr = {
++ .enable_reg = 0x770ac,
++ .enable_mask = BIT(0),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_ufs_phy_rx_symbol_1_clk",
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
++/* external clocks so add BRANCH_HALT_SKIP */
++static struct clk_branch gcc_ufs_phy_tx_symbol_0_clk = {
++ .halt_check = BRANCH_HALT_SKIP,
++ .clkr = {
++ .enable_reg = 0x77018,
++ .enable_mask = BIT(0),
++ .hw.init = &(struct clk_init_data){
++ .name = "gcc_ufs_phy_tx_symbol_0_clk",
++ .ops = &clk_branch2_ops,
++ },
++ },
++};
++
+ static struct clk_branch gcc_ufs_phy_unipro_core_clk = {
+ .halt_reg = 0x77058,
+ .halt_check = BRANCH_HALT,
+@@ -3505,6 +3583,9 @@ static struct clk_regmap *gcc_sm8150_clo
+ [GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr,
+ [GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK] =
+ &gcc_ufs_card_phy_aux_hw_ctl_clk.clkr,
++ [GCC_UFS_CARD_RX_SYMBOL_0_CLK] = &gcc_ufs_card_rx_symbol_0_clk.clkr,
++ [GCC_UFS_CARD_RX_SYMBOL_1_CLK] = &gcc_ufs_card_rx_symbol_1_clk.clkr,
++ [GCC_UFS_CARD_TX_SYMBOL_0_CLK] = &gcc_ufs_card_tx_symbol_0_clk.clkr,
+ [GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr,
+ [GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] =
+ &gcc_ufs_card_unipro_core_clk_src.clkr,
+@@ -3522,6 +3603,9 @@ static struct clk_regmap *gcc_sm8150_clo
+ [GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr,
+ [GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr,
+ [GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK] = &gcc_ufs_phy_phy_aux_hw_ctl_clk.clkr,
++ [GCC_UFS_PHY_RX_SYMBOL_0_CLK] = &gcc_ufs_phy_rx_symbol_0_clk.clkr,
++ [GCC_UFS_PHY_RX_SYMBOL_1_CLK] = &gcc_ufs_phy_rx_symbol_1_clk.clkr,
++ [GCC_UFS_PHY_TX_SYMBOL_0_CLK] = &gcc_ufs_phy_tx_symbol_0_clk.clkr,
+ [GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr,
+ [GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] =
+ &gcc_ufs_phy_unipro_core_clk_src.clkr,
--- /dev/null
+From e13762abf38ead29071407f32b9dcec38f21dc34 Mon Sep 17 00:00:00 2001
+From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
+Date: Sun, 5 Jul 2020 19:34:57 +0200
+Subject: HID: logitech-hidpp: avoid repeated "multiplier = " log messages
+
+From: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+
+commit e13762abf38ead29071407f32b9dcec38f21dc34 upstream.
+
+These messages appear each time the mouse wakes from sleep, in my case
+(Logitech M705), every minute or so.
+Let's downgrade them to the "debug" level so they don't fill the kernel log
+by default.
+
+While we are at it, let's make clear that this is a wheel multiplier (and
+not, for example, XY movement multiplier).
+
+Fixes: 4435ff2f09a2 ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
+Cc: stable@vger.kernel.org
+Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+Reviewed-by: Harry Cutts <hcutts@chromium.org>
+Signed-off-by: Jiri Kosina <jkosina@suse.cz>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/hid/hid-logitech-hidpp.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/hid/hid-logitech-hidpp.c
++++ b/drivers/hid/hid-logitech-hidpp.c
+@@ -2964,7 +2964,7 @@ static int hi_res_scroll_enable(struct h
+ multiplier = 1;
+
+ hidpp->vertical_wheel_counter.wheel_multiplier = multiplier;
+- hid_info(hidpp->hid_dev, "multiplier = %d\n", multiplier);
++ hid_dbg(hidpp->hid_dev, "wheel multiplier = %d\n", multiplier);
+ return 0;
+ }
+
--- /dev/null
+From dcb351c03f2fa6a599de1061b174167e03ee312b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Tue, 12 May 2020 10:24:51 +0200
+Subject: mtd: rawnand: brcmnand: correctly verify erased pages
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Álvaro Fernández Rojas <noltari@gmail.com>
+
+commit dcb351c03f2fa6a599de1061b174167e03ee312b upstream.
+
+The current code checks that the whole OOB area is erased.
+This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will
+fail due to the usable OOB bytes not being 0xff.
+Correct this by only checking that data and ECC bytes aren't 0xff.
+
+Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips")
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20200512082451.771212-1-noltari@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/brcmnand/brcmnand.c | 19 +++++++++++--------
+ 1 file changed, 11 insertions(+), 8 deletions(-)
+
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -1790,28 +1790,31 @@ static int brcmnand_read_by_pio(struct m
+ static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd,
+ struct nand_chip *chip, void *buf, u64 addr)
+ {
+- int i, sas;
+- void *oob = chip->oob_poi;
++ struct mtd_oob_region ecc;
++ int i;
+ int bitflips = 0;
+ int page = addr >> chip->page_shift;
+ int ret;
++ void *ecc_bytes;
+ void *ecc_chunk;
+
+ if (!buf)
+ buf = nand_get_data_buf(chip);
+
+- sas = mtd->oobsize / chip->ecc.steps;
+-
+ /* read without ecc for verification */
+ ret = chip->ecc.read_page_raw(chip, buf, true, page);
+ if (ret)
+ return ret;
+
+- for (i = 0; i < chip->ecc.steps; i++, oob += sas) {
++ for (i = 0; i < chip->ecc.steps; i++) {
+ ecc_chunk = buf + chip->ecc.size * i;
+- ret = nand_check_erased_ecc_chunk(ecc_chunk,
+- chip->ecc.size,
+- oob, sas, NULL, 0,
++
++ mtd_ooblayout_ecc(mtd, i, &ecc);
++ ecc_bytes = chip->oob_poi + ecc.offset;
++
++ ret = nand_check_erased_ecc_chunk(ecc_chunk, chip->ecc.size,
++ ecc_bytes, ecc.length,
++ NULL, 0,
+ chip->ecc.strength);
+ if (ret < 0)
+ return ret;
--- /dev/null
+From 3d3fb3c5be9ce07fa85d8f67fb3922e4613b955b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Fri, 22 May 2020 14:15:21 +0200
+Subject: mtd: rawnand: brcmnand: fix CS0 layout
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Álvaro Fernández Rojas <noltari@gmail.com>
+
+commit 3d3fb3c5be9ce07fa85d8f67fb3922e4613b955b upstream.
+
+Only v3.3-v5.0 have a different CS0 layout.
+Controllers before v3.3 use the same layout for every CS.
+
+Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/brcmnand/brcmnand.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
++++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+@@ -537,8 +537,9 @@ static int brcmnand_revision_init(struct
+ } else {
+ ctrl->cs_offsets = brcmnand_cs_offsets;
+
+- /* v5.0 and earlier has a different CS0 offset layout */
+- if (ctrl->nand_version <= 0x0500)
++ /* v3.3-5.0 have a different CS0 offset layout */
++ if (ctrl->nand_version >= 0x0303 &&
++ ctrl->nand_version <= 0x0500)
+ ctrl->cs0_offsets = brcmnand_cs_offsets_cs0;
+ }
+
--- /dev/null
+From c525b7af96714f72e316c70781570a4a3e1c2856 Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Fri, 24 Apr 2020 18:44:59 +0200
+Subject: mtd: rawnand: marvell: Fix probe error path
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit c525b7af96714f72e316c70781570a4a3e1c2856 upstream.
+
+Ensure all chips are deregistered and cleaned in case of error during
+the probe.
+
+Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver")
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
+Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-5-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/marvell_nand.c | 23 ++++++++++++++---------
+ 1 file changed, 14 insertions(+), 9 deletions(-)
+
+--- a/drivers/mtd/nand/raw/marvell_nand.c
++++ b/drivers/mtd/nand/raw/marvell_nand.c
+@@ -2673,6 +2673,16 @@ static int marvell_nand_chip_init(struct
+ return 0;
+ }
+
++static void marvell_nand_chips_cleanup(struct marvell_nfc *nfc)
++{
++ struct marvell_nand_chip *entry, *temp;
++
++ list_for_each_entry_safe(entry, temp, &nfc->chips, node) {
++ nand_release(&entry->chip);
++ list_del(&entry->node);
++ }
++}
++
+ static int marvell_nand_chips_init(struct device *dev, struct marvell_nfc *nfc)
+ {
+ struct device_node *np = dev->of_node;
+@@ -2707,21 +2717,16 @@ static int marvell_nand_chips_init(struc
+ ret = marvell_nand_chip_init(dev, nfc, nand_np);
+ if (ret) {
+ of_node_put(nand_np);
+- return ret;
++ goto cleanup_chips;
+ }
+ }
+
+ return 0;
+-}
+
+-static void marvell_nand_chips_cleanup(struct marvell_nfc *nfc)
+-{
+- struct marvell_nand_chip *entry, *temp;
++cleanup_chips:
++ marvell_nand_chips_cleanup(nfc);
+
+- list_for_each_entry_safe(entry, temp, &nfc->chips, node) {
+- nand_release(&entry->chip);
+- list_del(&entry->node);
+- }
++ return ret;
+ }
+
+ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
--- /dev/null
+From c27075772d1f1c8aaf276db9943b35adda8a8b65 Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Fri, 24 Apr 2020 18:44:56 +0200
+Subject: mtd: rawnand: marvell: Fix the condition on a return code
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit c27075772d1f1c8aaf276db9943b35adda8a8b65 upstream.
+
+In a previous fix, I changed the condition on which the timeout of an
+IRQ is reached from:
+
+ if (!ret)
+
+into:
+
+ if (ret && !pending)
+
+While having a non-zero return code is usual in the Linux kernel, here
+ret comes from a wait_for_completion_timeout() which returns 0 when
+the waiting period is too long.
+
+Hence, the revised condition should be:
+
+ if (!ret && !pending)
+
+The faulty patch did not produce any error because of the !pending
+condition so this change is finally purely cosmetic and does not
+change the actual driver behavior.
+
+Fixes: cafb56dd741e ("mtd: rawnand: marvell: prevent timeouts on a loaded machine")
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
+Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-2-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/marvell_nand.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mtd/nand/raw/marvell_nand.c
++++ b/drivers/mtd/nand/raw/marvell_nand.c
+@@ -707,7 +707,7 @@ static int marvell_nfc_wait_op(struct na
+ * In case the interrupt was not served in the required time frame,
+ * check if the ISR was not served or if something went actually wrong.
+ */
+- if (ret && !pending) {
++ if (!ret && !pending) {
+ dev_err(nfc->dev, "Timeout waiting for RB signal\n");
+ return -ETIMEDOUT;
+ }
--- /dev/null
+From 7a0c18fb5c71c6ac7d4662a145e4227dcd4a36a3 Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Fri, 24 Apr 2020 18:44:58 +0200
+Subject: mtd: rawnand: marvell: Use nand_cleanup() when the device is not yet registered
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit 7a0c18fb5c71c6ac7d4662a145e4227dcd4a36a3 upstream.
+
+Do not call nand_release() while the MTD device has not been
+registered, use nand_cleanup() instead.
+
+Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver")
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
+Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-4-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/marvell_nand.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mtd/nand/raw/marvell_nand.c
++++ b/drivers/mtd/nand/raw/marvell_nand.c
+@@ -2664,7 +2664,7 @@ static int marvell_nand_chip_init(struct
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret) {
+ dev_err(dev, "failed to register mtd device: %d\n", ret);
+- nand_release(chip);
++ nand_cleanup(chip);
+ return ret;
+ }
+
--- /dev/null
+From 383fc3f613e7eac9f2e3c13b6f9fb8c1f39cb9d5 Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Tue, 19 May 2020 15:00:08 +0200
+Subject: mtd: rawnand: oxnas: Keep track of registered devices
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit 383fc3f613e7eac9f2e3c13b6f9fb8c1f39cb9d5 upstream.
+
+All initialized and registered devices should be listed somewhere so
+that we can unregister/free them in the _remove() path.
+
+This patch is not a fix per-se but is needed to apply three other
+fixes coming right after, explaining the Fixes/Cc: stable tags.
+
+Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support")
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-36-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/oxnas_nand.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/mtd/nand/raw/oxnas_nand.c
++++ b/drivers/mtd/nand/raw/oxnas_nand.c
+@@ -32,6 +32,7 @@ struct oxnas_nand_ctrl {
+ void __iomem *io_base;
+ struct clk *clk;
+ struct nand_chip *chips[OXNAS_NAND_MAX_CHIPS];
++ unsigned int nchips;
+ };
+
+ static uint8_t oxnas_nand_read_byte(struct nand_chip *chip)
+@@ -79,7 +80,6 @@ static int oxnas_nand_probe(struct platf
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ struct resource *res;
+- int nchips = 0;
+ int count = 0;
+ int err = 0;
+
+@@ -143,12 +143,12 @@ static int oxnas_nand_probe(struct platf
+ if (err)
+ goto err_cleanup_nand;
+
+- oxnas->chips[nchips] = chip;
+- ++nchips;
++ oxnas->chips[oxnas->nchips] = chip;
++ ++oxnas->nchips;
+ }
+
+ /* Exit if no chips found */
+- if (!nchips) {
++ if (!oxnas->nchips) {
+ err = -ENODEV;
+ goto err_clk_unprepare;
+ }
--- /dev/null
+From 0a5f45e57e35d0840bedb816974ce2e63406cd8b Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Tue, 19 May 2020 15:00:11 +0200
+Subject: mtd: rawnand: oxnas: Release all devices in the _remove() path
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit 0a5f45e57e35d0840bedb816974ce2e63406cd8b upstream.
+
+oxnans_nand_remove() should release all MTD devices and clean all NAND
+devices, not only the first one registered.
+
+Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support")
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-39-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/oxnas_nand.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/nand/raw/oxnas_nand.c
++++ b/drivers/mtd/nand/raw/oxnas_nand.c
+@@ -177,9 +177,13 @@ err_clk_unprepare:
+ static int oxnas_nand_remove(struct platform_device *pdev)
+ {
+ struct oxnas_nand_ctrl *oxnas = platform_get_drvdata(pdev);
++ struct nand_chip *chip;
++ int i;
+
+- if (oxnas->chips[0])
+- nand_release(oxnas->chips[0]);
++ for (i = 0; i < oxnas->nchips; i++) {
++ chip = oxnas->chips[i];
++ nand_release(chip);
++ }
+
+ clk_disable_unprepare(oxnas->clk);
+
--- /dev/null
+From b60391eb17b2956ff2fc4c348e5a464da21ff9cb Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Tue, 19 May 2020 15:00:10 +0200
+Subject: mtd: rawnand: oxnas: Unregister all devices on error
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit b60391eb17b2956ff2fc4c348e5a464da21ff9cb upstream.
+
+On error, the oxnas probe path just frees the device which failed and
+aborts the probe, leaving unreleased resources.
+
+Fix this situation by calling mtd_device_unregister()/nand_cleanup()
+on these.
+
+Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support")
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-38-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/oxnas_nand.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/mtd/nand/raw/oxnas_nand.c
++++ b/drivers/mtd/nand/raw/oxnas_nand.c
+@@ -82,6 +82,7 @@ static int oxnas_nand_probe(struct platf
+ struct resource *res;
+ int count = 0;
+ int err = 0;
++ int i;
+
+ /* Allocate memory for the device structure (and zero it) */
+ oxnas = devm_kzalloc(&pdev->dev, sizeof(*oxnas),
+@@ -161,6 +162,13 @@ err_cleanup_nand:
+ nand_cleanup(chip);
+ err_release_child:
+ of_node_put(nand_np);
++
++ for (i = 0; i < oxnas->nchips; i++) {
++ chip = oxnas->chips[i];
++ WARN_ON(mtd_device_unregister(nand_to_mtd(chip)));
++ nand_cleanup(chip);
++ }
++
+ err_clk_unprepare:
+ clk_disable_unprepare(oxnas->clk);
+ return err;
--- /dev/null
+From 4d8ec041d9c454029f6cd90622f6d81eb61e781c Mon Sep 17 00:00:00 2001
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+Date: Tue, 28 Apr 2020 11:42:55 +0200
+Subject: mtd: rawnand: timings: Fix default tR_max and tCCS_min timings
+
+From: Miquel Raynal <miquel.raynal@bootlin.com>
+
+commit 4d8ec041d9c454029f6cd90622f6d81eb61e781c upstream.
+
+tR and tCCS are currently wrongly expressed in femtoseconds, while we
+expect these values to be expressed in picoseconds. Set right
+hardcoded values.
+
+Fixes: 6a943386ee36 mtd: rawnand: add default values for dynamic timings
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
+Link: https://lore.kernel.org/linux-mtd/20200428094302.14624-3-miquel.raynal@bootlin.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/mtd/nand/raw/nand_timings.c | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/nand/raw/nand_timings.c
++++ b/drivers/mtd/nand/raw/nand_timings.c
+@@ -314,10 +314,9 @@ int onfi_fill_data_interface(struct nand
+ /* microseconds -> picoseconds */
+ timings->tPROG_max = 1000000ULL * ONFI_DYN_TIMING_MAX;
+ timings->tBERS_max = 1000000ULL * ONFI_DYN_TIMING_MAX;
+- timings->tR_max = 1000000ULL * 200000000ULL;
+
+- /* nanoseconds -> picoseconds */
+- timings->tCCS_min = 1000UL * 500000;
++ timings->tR_max = 200000000;
++ timings->tCCS_min = 500000;
+ }
+
+ return 0;
+++ /dev/null
-From c624adc9cb6e6e8f1c0230a7775add700bc2409b Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 28 Apr 2020 23:25:33 +0200
-Subject: samples: fix binderfs sample
-
-From: Arnd Bergmann <arnd@arndb.de>
-
-commit c624adc9cb6e6e8f1c0230a7775add700bc2409b upstream.
-
-A routine check for misspelled Kconfig symbols showed on instance
-from last year, the correct symbol name is CONFIG_ANDROID_BINDERFS,
-not CONFIG_CONFIG_ANDROID_BINDERFS, so the extra prefix must
-be removed in the Kconfig file to allow enabling the sample.
-
-As the actual sample fails to build as a kernel module, change the
-Makefile enough to get to build as a hostprog instead.
-
-Fixes: 9762dc1432e1 ("samples: add binderfs sample program")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
-Link: https://lore.kernel.org/r/20200428212555.2806258-1-arnd@arndb.de
-Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
----
- samples/Kconfig | 2 +-
- samples/binderfs/Makefile | 6 +++++-
- 2 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/samples/Kconfig
-+++ b/samples/Kconfig
-@@ -156,7 +156,7 @@ config SAMPLE_VFIO_MDEV_MBOCHS
-
- config SAMPLE_ANDROID_BINDERFS
- bool "Build Android binderfs example"
-- depends on CONFIG_ANDROID_BINDERFS
-+ depends on ANDROID_BINDERFS
- help
- Builds a sample program to illustrate the use of the Android binderfs
- filesystem.
---- a/samples/binderfs/Makefile
-+++ b/samples/binderfs/Makefile
-@@ -1,2 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0-only
--obj-$(CONFIG_SAMPLE_ANDROID_BINDERFS) += binderfs_example.o
-+ifndef CROSS_COMPILE
-+ifdef CONFIG_SAMPLE_ANDROID_BINDERFS
-+hostprogs := binderfs_example
-+endif
-+endif
soc-qcom-rpmh-invalidate-sleep-and-wake-tcses-before-flushing-new-data.patch
soc-qcom-rpmh-rsc-clear-active-mode-configuration-for-wake-tcs.patch
soc-qcom-rpmh-rsc-allow-using-free-wake-tcs-for-active-request.patch
-samples-fix-binderfs-sample.patch
rdma-mlx5-verify-that-qp-is-created-with-rq-or-sq.patch
+mtd-rawnand-marvell-fix-the-condition-on-a-return-code.patch
+mtd-rawnand-marvell-use-nand_cleanup-when-the-device-is-not-yet-registered.patch
+mtd-rawnand-marvell-fix-probe-error-path.patch
+mtd-rawnand-timings-fix-default-tr_max-and-tccs_min-timings.patch
+mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch
+mtd-rawnand-brcmnand-fix-cs0-layout.patch
+mtd-rawnand-oxnas-keep-track-of-registered-devices.patch
+mtd-rawnand-oxnas-unregister-all-devices-on-error.patch
+mtd-rawnand-oxnas-release-all-devices-in-the-_remove-path.patch
+clk-qcom-gcc-add-gpu-and-npu-clocks-for-sm8150.patch
+clk-qcom-gcc-add-missing-ufs-clocks-for-sm8150.patch
+slimbus-core-fix-mismatch-in-of_node_get-put.patch
+hid-logitech-hidpp-avoid-repeated-multiplier-log-messages.patch
--- /dev/null
+From 01360857486c0e4435dea3aa2f78b47213b7cf6a Mon Sep 17 00:00:00 2001
+From: Saravana Kannan <saravanak@google.com>
+Date: Mon, 11 May 2020 16:13:34 +0100
+Subject: slimbus: core: Fix mismatch in of_node_get/put
+
+From: Saravana Kannan <saravanak@google.com>
+
+commit 01360857486c0e4435dea3aa2f78b47213b7cf6a upstream.
+
+Adding missing corresponding of_node_put
+
+Fixes: 7588a511bdb4 ("slimbus: core: add support to device tree helper")
+Signed-off-by: Saravana Kannan <saravanak@google.com>
+[Srini: added fixes tag, removed NULL check and updated log]
+Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Link: https://lore.kernel.org/r/20200511151334.362-3-srinivas.kandagatla@linaro.org
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ drivers/slimbus/core.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/slimbus/core.c
++++ b/drivers/slimbus/core.c
+@@ -283,6 +283,7 @@ EXPORT_SYMBOL_GPL(slim_register_controll
+ /* slim_remove_device: Remove the effect of slim_add_device() */
+ static void slim_remove_device(struct slim_device *sbdev)
+ {
++ of_node_put(sbdev->dev.of_node);
+ device_unregister(&sbdev->dev);
+ }
+
projects / thirdparty / kernel / stable-queue.git / commitdiff
