libtool.m4: fix nm BSD flag detection

Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support.  Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:

 - it runs the test by doing an nm of /dev/null.  Some platforms
   reasonably refuse to do an nm on a device file, but before now this
   has only been worked around by assuming that the error message has a
   specific textual form emitted by Tru64 nm, and that getting this
   error means this is Tru64 nm and that nm -B would work to produce
   BSD-format output, even though the test never actually got anything
   but an error message out of nm -B.  This is fixable by nm'ing *nm
   itself* (since we necessarily have a path to it).

 - the test is entirely skipped if NM is set in the environment, on the
   grounds that the user has overridden the test: but the user cannot
   reasonably be expected to know that libtool wants not only nm but
   also flags forcing BSD-format output.  Worse yet, one such "user" is
   the top-level Cygnus configure script, which neither tests for
   nor specifies any BSD-format flags.  So platforms needing BSD-format
   flags always fail to set them when run in a Cygnus tree, breaking
   -export-symbols-regex on such platforms.  Libtool also needs to
   augment $LD on some platforms, but this is done unconditionally,
   augmenting whatever the user specified: the nm check should do the
   same.

   One wrinkle: if the user has overridden $NM, a path might have been
   provided: so we use the user-specified path if there was one, and
   otherwise do the path search as usual.  (If the nm specified doesn't
   work, this might lead to a few extra pointless path searches -- but
   the test is going to fail anyway, so that's not a problem.)

(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)

ChangeLog:

	* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
	NM, if there is one.  Run nm on itself, not on /dev/null, to avoid
	errors from nms that refuse to work on non-regular files.  Remove
	other workarounds for this problem.  Strip out blank lines from the
	nm output.

fixincludes/ChangeLog:

	* configure: Regenerate.

gcc/ChangeLog:

	* configure: Regenerate.

libatomic/ChangeLog:

	* configure: Regenerate.

libbacktrace/ChangeLog:

	* configure: Regenerate.

libcc1/ChangeLog:

	* configure: Regenerate.

libffi/ChangeLog:

	* configure: Regenerate.

libgfortran/ChangeLog:

	* configure: Regenerate.

libgm2/ChangeLog:

	* configure: Regenerate.

libgomp/ChangeLog:

	* configure: Regenerate.

libitm/ChangeLog:

	* configure: Regenerate.

libobjc/ChangeLog:

	* configure: Regenerate.

libphobos/ChangeLog:

	* configure: Regenerate.

libquadmath/ChangeLog:

	* configure: Regenerate.

libsanitizer/ChangeLog:

	* configure: Regenerate.

libssp/ChangeLog:

	* configure: Regenerate.

libstdc++-v3/ChangeLog:

	* configure: Regenerate.

libvtv/ChangeLog:

	* configure: Regenerate.

lto-plugin/ChangeLog:

	* configure: Regenerate.

zlib/ChangeLog:

	* configure: Regenerate.

diff --git a/fixincludes/configure b/fixincludes/configure
index f1748ebef74674ec726207204db993035ac54c32..b9770489adcc0d3e66b80a237fe16f7e699e7a18 100755 (executable)
--- a/fixincludes/configure
+++ b/fixincludes/configure
@@ -2941,7 +2941,8 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 # LT_PATH_NM
 # ----------
-# find the pathname to a BSD- or MS-compatible name lister
+# find the pathname to a BSD- or MS-compatible name lister, and any flags
+# needed to make it compatible
 # LT_PATH_NM
 
 # Old names:

diff --git a/gcc/configure b/gcc/configure
index 55cb24ef45386f6decb340ca81dacf96642a8ca1..81b93c1b5995ec3fb3d9c6d0200ce4caf4a70378 100755 (executable)
--- a/gcc/configure
+++ b/gcc/configure
@@ -14136,48 +14136,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -19881,7 +19882,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 19884 "configure"
+#line 19885 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -19987,7 +19988,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 19990 "configure"
+#line 19991 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libatomic/configure b/libatomic/configure
index 8e10b70d4430acf5a63ca83c1df07398e56dbe26..72bd9ae5814be43ec170bf4c3d9b9dc4e6ae7722 100755 (executable)
--- a/libatomic/configure
+++ b/libatomic/configure
@@ -5381,48 +5381,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11395,7 +11396,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11398 "configure"
+#line 11399 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11501,7 +11502,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11504 "configure"
+#line 11505 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libbacktrace/configure b/libbacktrace/configure
index d086b86a088dea0475a0988fe7874923b2e09aea..9264c2b19689cebce919625e0782236f88e0a877 100755 (executable)
--- a/libbacktrace/configure
+++ b/libbacktrace/configure
@@ -5826,48 +5826,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11572,7 +11573,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11575 "configure"
+#line 11576 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11678,7 +11679,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11681 "configure"
+#line 11682 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libcc1/configure b/libcc1/configure
index 84964de24deb3446d99ad4af563dbbbfe28f3967..1141b34309600f00ac362e1f045504a4fef7818a 100755 (executable)
--- a/libcc1/configure
+++ b/libcc1/configure
@@ -5087,48 +5087,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -10832,7 +10833,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10835 "configure"
+#line 10836 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10938,7 +10939,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10941 "configure"
+#line 10942 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libffi/configure b/libffi/configure
index a1824ceaeb3c477c9092bb3df6effe1d523fbda4..0f34914d87626d79a680353481796f6e69fadd4a 100755 (executable)
--- a/libffi/configure
+++ b/libffi/configure
@@ -5613,48 +5613,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11627,7 +11628,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11630 "configure"
+#line 11631 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11733,7 +11734,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11736 "configure"
+#line 11737 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libgfortran/configure b/libgfortran/configure
index 425d1e32b39ddd110e77bc4b9970e9a19a5bd87a..2cd8cca82e229274760beb76de3e6949211180c2 100755 (executable)
--- a/libgfortran/configure
+++ b/libgfortran/configure
@@ -7015,48 +7015,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -12792,7 +12793,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12795 "configure"
+#line 12796 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12898,7 +12899,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12901 "configure"
+#line 12902 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libgm2/configure b/libgm2/configure
index 7cfbc6be4389dc715cd2659bedaf0faaea9c08c4..f6ea127ae30ce150010a0e1abb58031435afa11f 100755 (executable)
--- a/libgm2/configure
+++ b/libgm2/configure
@@ -6917,48 +6917,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -12695,7 +12696,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12698 "configure"
+#line 12699 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12801,7 +12802,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12804 "configure"
+#line 12805 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libgomp/configure b/libgomp/configure
index 49b43ba0967ba50691a3b144c6b47632b70fa51b..5a31497cb3b3f60fe7a0f45807fd61d9c2432a6b 100755 (executable)
--- a/libgomp/configure
+++ b/libgomp/configure
@@ -5395,48 +5395,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11409,7 +11410,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11412 "configure"
+#line 11413 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11515,7 +11516,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11518 "configure"
+#line 11519 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libitm/configure b/libitm/configure
index 6961eb879b3e3971ef5c8e3898251f6bb08c452c..2e552f48770be99df17ea9c9408b3ffb8f9282a2 100755 (executable)
--- a/libitm/configure
+++ b/libitm/configure
@@ -6056,48 +6056,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -12071,7 +12072,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12074 "configure"
+#line 12075 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12177,7 +12178,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12180 "configure"
+#line 12181 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libobjc/configure b/libobjc/configure
index cbac20271cf02c91652571a076e6e1eb90ce2053..274f764f7de82e6c56bf1da70c53612efb1a53c8 100755 (executable)
--- a/libobjc/configure
+++ b/libobjc/configure
@@ -4744,48 +4744,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -10827,7 +10828,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10830 "configure"
+#line 10831 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10933,7 +10934,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10936 "configure"
+#line 10937 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libphobos/configure b/libphobos/configure
index 7c453f58771258382d4b99449138ef3cd9846f96..c1126404f28df5e672d6511b011fe7d243c0f710 100755 (executable)
--- a/libphobos/configure
+++ b/libphobos/configure
@@ -6060,48 +6060,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11805,7 +11806,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11808 "configure"
+#line 11809 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11911,7 +11912,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11914 "configure"
+#line 11915 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libquadmath/configure b/libquadmath/configure
index 60844f382655ab8d92df41842aeb1ca7f17b0c9d..5e4632c557b684cc8e0ff0471e600aef44683765 100755 (executable)
--- a/libquadmath/configure
+++ b/libquadmath/configure
@@ -5082,48 +5082,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -10861,7 +10862,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10864 "configure"
+#line 10865 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10967,7 +10968,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10970 "configure"
+#line 10971 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libsanitizer/configure b/libsanitizer/configure
index 52c6677793edb6d99defb4b40fa625c2806b366f..9826fc3d7ebeca07b8cfeed194e63e0cd6cfb9e3 100755 (executable)
--- a/libsanitizer/configure
+++ b/libsanitizer/configure
@@ -6669,48 +6669,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -12414,7 +12415,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12417 "configure"
+#line 12418 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12520,7 +12521,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12523 "configure"
+#line 12524 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libssp/configure b/libssp/configure
index fdf4e9d234d0d0ff5ec32635c094760ec5952e66..9e2de53afa5e9227d3199aac0775240db02b04c2 100755 (executable)
--- a/libssp/configure
+++ b/libssp/configure
@@ -5268,48 +5268,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -11047,7 +11048,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11050 "configure"
+#line 11051 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11153,7 +11154,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11156 "configure"
+#line 11157 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
index b280071391da1525324e9ef7ea94e68bd9d35af7..d029fa4284cce96edaa752cb239f203aef55b426 100755 (executable)
--- a/libstdc++-v3/configure
+++ b/libstdc++-v3/configure
@@ -6322,48 +6322,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -12218,7 +12219,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12221 "configure"
+#line 12222 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12324,7 +12325,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12327 "configure"
+#line 12328 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -16048,7 +16049,7 @@ $as_echo "$glibcxx_cv_atomic_long_long" >&6; }
   # Fake what AC_TRY_COMPILE does.
 
     cat > conftest.$ac_ext << EOF
-#line 16051 "configure"
+#line 16052 "configure"
 int main()
 {
   typedef bool atomic_type;
@@ -16083,7 +16084,7 @@ $as_echo "$glibcxx_cv_atomic_bool" >&6; }
     rm -f conftest*
 
     cat > conftest.$ac_ext << EOF
-#line 16086 "configure"
+#line 16087 "configure"
 int main()
 {
   typedef short atomic_type;
@@ -16118,7 +16119,7 @@ $as_echo "$glibcxx_cv_atomic_short" >&6; }
     rm -f conftest*
 
     cat > conftest.$ac_ext << EOF
-#line 16121 "configure"
+#line 16122 "configure"
 int main()
 {
   // NB: _Atomic_word not necessarily int.
@@ -16154,7 +16155,7 @@ $as_echo "$glibcxx_cv_atomic_int" >&6; }
     rm -f conftest*
 
     cat > conftest.$ac_ext << EOF
-#line 16157 "configure"
+#line 16158 "configure"
 int main()
 {
   typedef long long atomic_type;
@@ -16310,7 +16311,7 @@ $as_echo "mutex" >&6; }
   # unnecessary for this test.
 
     cat > conftest.$ac_ext << EOF
-#line 16313 "configure"
+#line 16314 "configure"
 int main()
 {
   _Decimal32 d1;
@@ -16352,7 +16353,7 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
   # unnecessary for this test.
 
   cat > conftest.$ac_ext << EOF
-#line 16355 "configure"
+#line 16356 "configure"
 template<typename T1, typename T2>
   struct same
   { typedef T2 type; };

diff --git a/libtool.m4 b/libtool.m4
index 7af548938ec25a82153cfe8367ab2c8c95aec786..b827d21177db010cebe62aa31d92067eed6604d6 100644 (file)
--- a/libtool.m4
+++ b/libtool.m4
@@ -3231,53 +3231,55 @@ _LT_DECL([], [file_magic_cmd], [1],
 
 # LT_PATH_NM
 # ----------
-# find the pathname to a BSD- or MS-compatible name lister
+# find the pathname to a BSD- or MS-compatible name lister, and any flags
+# needed to make it compatible
 AC_DEFUN([LT_PATH_NM],
 [AC_REQUIRE([AC_PROG_CC])dnl
 AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi])
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}])
 if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else

diff --git a/libvtv/configure b/libvtv/configure
index 33ca49e63c6ca7996a74fb2b966ef5a7b7150503..538b6d110b70987e94e31e066a2164fcd74d46ac 100755 (executable)
--- a/libvtv/configure
+++ b/libvtv/configure
@@ -6564,48 +6564,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -12309,7 +12310,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12312 "configure"
+#line 12313 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12415,7 +12416,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12418 "configure"
+#line 12419 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/lto-plugin/configure b/lto-plugin/configure
index 69ccd66b0385069b683c38351e89596244c843fa..fb4a736a1f803688c4b98c8500e1059263a3d921 100755 (executable)
--- a/lto-plugin/configure
+++ b/lto-plugin/configure
@@ -6435,48 +6435,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -12181,7 +12182,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12184 "configure"
+#line 12185 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -12287,7 +12288,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 12290 "configure"
+#line 12291 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H

diff --git a/zlib/configure b/zlib/configure
index 29eeb3504298c24e8fe8b20a669dc65356e842a9..88ca62f28da495059ff6da1c27019fdbb066b48e 100755 (executable)
--- a/zlib/configure
+++ b/zlib/configure
@@ -4748,48 +4748,49 @@ if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi
+   # Let the user override the nm to test.
+   lt_nm_to_check="$NM"
+ else
+   lt_nm_to_check="${ac_tool_prefix}nm"
+   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+     lt_nm_to_check="$lt_nm_to_check nm"
+   fi
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+     IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     case "$lt_tmp_nm" in
+     */*|*\\*) tmp_nm="$lt_tmp_nm";;
+     *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+     esac
+     if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       case `"$tmp_nm" -B "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+       *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+        break
+        ;;
+       *)
+        case `"$tmp_nm" -p "$tmp_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+        *$tmp_nm*)
+          lt_cv_path_NM="$tmp_nm -p"
+          break
+          ;;
+        *)
+          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+          continue # so that we can try to find one that supports BSD flags
+          ;;
+        esac
+        ;;
+       esac
+     fi
+   done
+   IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
@@ -10794,7 +10795,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10797 "configure"
+#line 10798 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10900,7 +10901,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10903 "configure"
+#line 10904 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H