ARM: dts: renesas: genmai: Sort nodes

To make future additions easier.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240921114813.4124-10-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/20240921114813.4124-11-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
index c4c2d750ad79d577d3540bc048d067a014be579a..c68eebb9092b304de94e8f63daf4165559548145 100644 (file)
--- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -24,11 +24,6 @@
                stdout-path = "serial0:115200n8";
        };
 
-       memory@8000000 {
-               device_type = "memory";
-               reg = <0x08000000 0x08000000>;
-       };
-
        flash@18000000 {
                compatible = "mtd-rom";
                reg = <0x18000000 0x08000000>;
@@ -70,47 +65,13 @@
                        gpios = <&port4 11 GPIO_ACTIVE_LOW>;
                };
        };
-};
-
-&pinctrl {
-
-       scif2_pins: serial2 {
-               /* P3_0 as TxD2; P3_2 as RxD2 */
-               pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
-       };
 
-       i2c2_pins: i2c2 {
-               /* RIIC2: P1_4 as SCL, P1_5 as SDA */
-               pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
-       };
-
-       ether_pins: ether {
-               /* Ethernet on Ports 1,2,3,5 */
-               pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
-                        <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
-                        <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
-                        <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
-                        <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
-                        <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
-                        <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
-                        <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
-                        <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
-                        <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
-                        <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
-                        <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
-                        <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
-                        <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
-                        <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
-                        <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
-                        <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
-                        <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+       memory@8000000 {
+               device_type = "memory";
+               reg = <0x08000000 0x08000000>;
        };
 };
 
-&extal_clk {
-       clock-frequency = <13330000>;
-};
-
 &bsc {
        flash@0 {
                compatible = "cfi-flash";
@@ -167,18 +128,6 @@
        };
 };
 
-&usb_x1_clk {
-       clock-frequency = <48000000>;
-};
-
-&rtc_x1_clk {
-       clock-frequency = <32768>;
-};
-
-&mtu2 {
-       status = "okay";
-};
-
 &ether {
        pinctrl-names = "default";
        pinctrl-0 = <&ether_pins>;
@@ -194,6 +143,10 @@
        };
 };
 
+&extal_clk {
+       clock-frequency = <13330000>;
+};
+
 &i2c2 {
        status = "okay";
        clock-frequency = <400000>;
@@ -208,6 +161,10 @@
        };
 };
 
+&mtu2 {
+       status = "okay";
+};
+
 &ostm0 {
        status = "okay";
 };
@@ -216,6 +173,44 @@
        status = "okay";
 };
 
+&pinctrl {
+       ether_pins: ether {
+               /* Ethernet on Ports 1,2,3,5 */
+               pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
+                        <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
+                        <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+                        <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+                        <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
+                        <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
+                        <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
+                        <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
+                        <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
+                        <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
+                        <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
+                        <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
+                        <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
+                        <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
+                        <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
+                        <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
+                        <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
+                        <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+       };
+
+       i2c2_pins: i2c2 {
+               /* RIIC2: P1_4 as SCL, P1_5 as SDA */
+               pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+       };
+
+       scif2_pins: serial2 {
+               /* P3_0 as TxD2; P3_2 as RxD2 */
+               pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+       };
+};
+
+&rtc_x1_clk {
+       clock-frequency = <32768>;
+};
+
 &rtc {
        status = "okay";
 };
@@ -237,6 +232,10 @@
        };
 };
 
+&usb_x1_clk {
+       clock-frequency = <48000000>;
+};
+
 &wdt {
        timeout-sec = <60>;
        status = "okay";