For some reason, presumably historical, the `install-gnatlib' target for
the default multilib is invoked twice, once via the `ada.install-common'
target in `gcc/ada/gcc-interface/Make-lang.in' invoked from gcc/ and
again via the `install-libada' target in libada/.
Apart from doing the same twice this is actually harmful in sufficiently
parallelized `make' invocation, as the removal of old files performed
within the `install-gnatlib' recipe in the former case actually races
with the installation of new files done in the latter case, causing the
recipe to fail and abort, however non-fatally, having not completed the
installation of all the built files needed for the newly-built compiler
to work correctly.
This can be observed with a native `x86_64-linux-gnu' bootstrap:
make[4]: Entering directory '.../gcc/ada'
rm -rf .../lib/gcc/x86_64-linux-gnu/10.0.0/adalib
rm: cannot remove '.../lib/gcc/x86_64-linux-gnu/10.0.0/adalib': Directory not empty
make[4]: *** [gcc-interface/Makefile:512: install-gnatlib] Error 1
make[4]: Leaving directory '.../gcc/ada'
make[3]: *** [.../gcc/ada/gcc-interface/Make-lang.in:853: install-gnatlib] Error 2
make[2]: [.../gcc/ada/gcc-interface/Make-lang.in:829: ada.install-common] Error 2 (ignored)
which then causes missing files to be reported when an attempt is made
to use the newly-installed non-functional compiler to build a
`riscv-linux-gnu' cross-compiler:
(cd ada/bldtools/sinfo; gnatmake -q xsinfo ; ./xsinfo sinfo.h )
error: "ada.ali" not found, "ada.ads" must be compiled
error: "s-memory.ali" not found, "s-memory.adb" must be compiled
gnatmake: *** bind failed.
/bin/sh: ./xsinfo: No such file or directory
make[2]: *** [.../gcc/ada/Make-generated.in:45: ada/sinfo.h] Error 127
make[2]: Leaving directory '.../gcc'
make[1]: *** [Makefile:4369: all-gcc] Error 2
make[1]: Leaving directory '...'
make: *** [Makefile:965: all] Error 2
Depending on timing `.../lib/gcc/x86_64-linux-gnu/10.0.0/adainclude' may
cause an installation failure instead and the resulting compiler may be
non-functional in a different way.
Only invoke `install-gnatlib' from within gcc/ then if a legacy build
process is being used with libada disabled and gnatlib built manually
with `make -C gcc gnatlib'.
gcc/
* Makefile.in (gnat_install_lib): New variable.
* configure.ac: Substitute it.
* configure: Regenerate.
gcc/ada/
* gcc-interface/Make-lang.in (ada.install-common): Split into...
(gnat-install-tools, gnat-install-lib): ... these.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@276422
138bc75d-0d04-0410-961f-
82ee72b054a4
+2019-10-01 Maciej W. Rozycki <macro@wdc.com>
+
+ * Makefile.in (gnat_install_lib): New variable.
+ * configure.ac: Substitute it.
+ * configure: Regenerate.
+
2019-10-01 Jan Hubicka <hubicka@ucw.cz>
PR lto/91222
# language hooks, generated by configure
@language_hooks@
+# Wire in install-gnatlib invocation with `make install' for a configuration
+# with top-level libada disabled.
+gnat_install_lib = @gnat_install_lib@
+
# per-language makefile fragments
ifneq ($(LANG_MAKEFRAGS),)
include $(LANG_MAKEFRAGS)
+2019-10-01 Maciej W. Rozycki <macro@wdc.com>
+
+ * gcc-interface/Make-lang.in (ada.install-common): Split into...
+ (gnat-install-tools, gnat-install-lib): ... these.
+
2019-09-26 Alexandre Oliva <oliva@adacore.com>
* gcc-interface/decl.c (components_to_record): Set
# gnatlink, gnatls, gnatmake, gnatname, gnatprep, gnatxref, gnatfind,
# gnatclean).
# gnatdll is only used on Windows.
-ada.install-common:
+ada.install-common: $(gnat_install_lib) gnat-install-tools
+
+gnat-install-tools:
$(MKDIR) $(DESTDIR)$(bindir)
-if [ -f gnat1$(exeext) ] ; \
then \
#
# Finally, install the library
#
+gnat-install-lib: | gnat-install-tools
-if [ -f gnat1$(exeext) ] ; \
then \
$(MAKE) $(COMMON_FLAGS_TO_PASS) $(ADA_FLAGS_TO_PASS) install-gnatlib; \
accel_dir_suffix
real_target_noncanonical
enable_as_accelerator
+gnat_install_lib
REPORT_BUGS_TEXI
REPORT_BUGS_TO
PKGVERSION
fi
+# If top-level libada has been disabled, then wire in install-gnatlib
+# invocation with `make install', so that one can build and install
+# the library manually with `make -C gcc all gnatlib gnattools install'.
+if test x"$enable_libada" = xno; then
+ gnat_install_lib=gnat-install-lib
+else
+ gnat_install_lib=
+fi
+
+
if test x"$enable_as_accelerator_for" != x; then
$as_echo "#define ACCEL_COMPILER 1" >>confdefs.h
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 18822 "configure"
+#line 18833 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 18928 "configure"
+#line 18939 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
esac],
[enable_languages=c])
+# If top-level libada has been disabled, then wire in install-gnatlib
+# invocation with `make install', so that one can build and install
+# the library manually with `make -C gcc all gnatlib gnattools install'.
+if test x"$enable_libada" = xno; then
+ gnat_install_lib=gnat-install-lib
+else
+ gnat_install_lib=
+fi
+AC_SUBST(gnat_install_lib)
+
if test x"$enable_as_accelerator_for" != x; then
AC_DEFINE(ACCEL_COMPILER, 1,
[Define if this compiler should be built as the offload target compiler.])