--- /dev/null
+From a66352e005488ecb4b534ba1af58a9f671eba9b8 Mon Sep 17 00:00:00 2001
+From: Marek Szyprowski <m.szyprowski@samsung.com>
+Date: Fri, 15 Feb 2019 11:36:50 +0100
+Subject: ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
+
+From: Marek Szyprowski <m.szyprowski@samsung.com>
+
+commit a66352e005488ecb4b534ba1af58a9f671eba9b8 upstream.
+
+Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250
+PMU node. This fixes the following warning on boot:
+
+exynos_clkout_init: failed to register clkout clock
+
+Fixes: d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data")
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
+Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm/boot/dts/exynos3250.dtsi | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/arm/boot/dts/exynos3250.dtsi
++++ b/arch/arm/boot/dts/exynos3250.dtsi
+@@ -172,6 +172,9 @@
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
++ clock-names = "clkout8";
++ clocks = <&cmu CLK_FIN_PLL>;
++ #clock-cells = <1>;
+ };
+
+ mipi_phy: video-phy {
--- /dev/null
+From ec33745bccc8f336957c751f4153421cc9ef5a54 Mon Sep 17 00:00:00 2001
+From: Marek Szyprowski <m.szyprowski@samsung.com>
+Date: Thu, 24 Jan 2019 13:22:57 +0100
+Subject: ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3
+
+From: Marek Szyprowski <m.szyprowski@samsung.com>
+
+commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.
+
+Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for
+exynos4412-odroid-common") added MMC power sequence for eMMC card of
+Odroid X2/U3. It reused generic sd1_cd pin control configuration node
+and only disabled pull-up. However that time the pinctrl configuration
+was not applied during MMC power sequence driver initialization. This
+has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to
+proper platform device").
+
+It turned out then, that the provided pinctrl configuration is not
+correct, because the eMMC_RTSN line is being re-configured as 'special
+function/card detect function for mmc1 controller' not the simple
+'output', thus the power sequence driver doesn't really set the pin
+value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
+by providing separate node with eMMC_RTSN pin configuration.
+
+Cc: <stable@vger.kernel.org>
+Reported-by: Markus Reichl <m.reichl@fivetechno.de>
+Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
+Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
+Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
+Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 13 ++++++-------
+ 1 file changed, 6 insertions(+), 7 deletions(-)
+
+--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
++++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+@@ -60,7 +60,7 @@
+ };
+
+ emmc_pwrseq: pwrseq {
+- pinctrl-0 = <&sd1_cd>;
++ pinctrl-0 = <&emmc_rstn>;
+ pinctrl-names = "default";
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
+@@ -161,12 +161,6 @@
+ cpu0-supply = <&buck2_reg>;
+ };
+
+-/* RSTN signal for eMMC */
+-&sd1_cd {
+- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+-};
+-
+ &pinctrl_1 {
+ gpio_power_key: power_key {
+ samsung,pins = "gpx1-3";
+@@ -184,6 +178,11 @@
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
++
++ emmc_rstn: emmc-rstn {
++ samsung,pins = "gpk1-2";
++ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
++ };
+ };
+
+ &ehci {
--- /dev/null
+From 83b944174ad79825ae84a47af1a0354485b24602 Mon Sep 17 00:00:00 2001
+From: Jan Kiszka <jan.kiszka@siemens.com>
+Date: Thu, 24 Jan 2019 08:52:33 +0100
+Subject: arm64: dts: hikey: Give wifi some time after power-on
+
+From: Jan Kiszka <jan.kiszka@siemens.com>
+
+commit 83b944174ad79825ae84a47af1a0354485b24602 upstream.
+
+Somewhere along recent changes to power control of the wl1835, power-on
+became very unreliable on the hikey, failing like this:
+
+wl1271_sdio: probe of mmc2:0001:1 failed with error -16
+wl1271_sdio: probe of mmc2:0001:2 failed with error -16
+
+After playing with some dt parameters and comparing to other users of
+this chip, it turned out we need some power-on delay to make things
+stable again. In contrast to those other users which define 200 ms, the
+hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
+like on the Ultra96.
+
+Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
+Cc: <stable@vger.kernel.org> #4.12+
+Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
+Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+---
+ arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
++++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+@@ -118,6 +118,7 @@
+ reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ clocks = <&pmic>;
+ clock-names = "ext_clock";
++ post-power-on-delay-ms = <10>;
+ power-off-delay-us = <10>;
+ };
+
input-elan_i2c-add-id-for-touchpad-found-in-lenovo-s21e-20.patch
iscsi_ibft-fix-missing-break-in-switch-statement.patch
scsi-aacraid-fix-missing-break-in-switch-statement.patch
+arm64-dts-hikey-give-wifi-some-time-after-power-on.patch
+arm-dts-exynos-fix-pinctrl-definition-for-emmc-rtsn-line-on-odroid-x2-u3.patch
+arm-dts-exynos-add-minimal-clkout-parameters-to-exynos3250-pmu.patch
projects / thirdparty / kernel / stable-queue.git / commitdiff
