--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_ACPI_H
+#define LINUX_DEVICE_ID_ACPI_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define ACPI_ID_LEN 16
+
+struct acpi_device_id {
+ __u8 id[ACPI_ID_LEN];
+ kernel_ulong_t driver_data;
+ __u32 cls;
+ __u32 cls_msk;
+};
+
+/**
+ * ACPI_DEVICE_CLASS - macro used to describe an ACPI device with
+ * the PCI-defined class-code information
+ *
+ * @_cls : the class, subclass, prog-if triple for this device
+ * @_msk : the class mask for this device
+ *
+ * This macro is used to create a struct acpi_device_id that matches a
+ * specific PCI class. The .id and .driver_data fields will be left
+ * initialized with the default value.
+ */
+#define ACPI_DEVICE_CLASS(_cls, _msk) .cls = (_cls), .cls_msk = (_msk),
+
+#endif /* ifndef LINUX_DEVICE_ID_ACPI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_AMBA_H
+#define LINUX_DEVICE_ID_AMBA_H
+
+/**
+ * struct amba_id - identifies a device on an AMBA bus
+ * @id: The significant bits if the hardware device ID
+ * @mask: Bitmask specifying which bits of the id field are significant when
+ * matching. A driver binds to a device when ((hardware device ID) & mask)
+ * == id.
+ * @data: Private data used by the driver.
+ */
+struct amba_id {
+ unsigned int id;
+ unsigned int mask;
+ void *data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_AMBA_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_AP_H
+#define LINUX_DEVICE_ID_AP_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define AP_DEVICE_ID_MATCH_CARD_TYPE 0x01
+#define AP_DEVICE_ID_MATCH_QUEUE_TYPE 0x02
+
+/* s390 AP bus devices */
+struct ap_device_id {
+ __u16 match_flags; /* which fields to match against */
+ __u8 dev_type; /* device type */
+ kernel_ulong_t driver_info;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_AP_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_APR_H
+#define LINUX_DEVICE_ID_APR_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define APR_NAME_SIZE 32
+#define APR_MODULE_PREFIX "apr:"
+
+struct apr_device_id {
+ char name[APR_NAME_SIZE];
+ __u32 domain_id;
+ __u32 svc_id;
+ __u32 svc_version;
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_APR_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_AUXILIARY_H
+#define LINUX_DEVICE_ID_AUXILIARY_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define AUXILIARY_NAME_SIZE 40
+#define AUXILIARY_MODULE_PREFIX "auxiliary:"
+
+struct auxiliary_device_id {
+ char name[AUXILIARY_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_AUXILIARY_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_BCMA_H
+#define LINUX_DEVICE_ID_BCMA_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define BCMA_CORE(_manuf, _id, _rev, _class) \
+ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+
+#define BCMA_ANY_MANUF 0xFFFF
+#define BCMA_ANY_ID 0xFFFF
+#define BCMA_ANY_REV 0xFF
+#define BCMA_ANY_CLASS 0xFF
+
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+ __u16 manuf;
+ __u16 id;
+ __u8 rev;
+ __u8 class;
+} __attribute__((packed,aligned(2)));
+
+#endif /* ifndef LINUX_DEVICE_ID_BCMA_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_CCW_H
+#define LINUX_DEVICE_ID_CCW_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01
+#define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02
+#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04
+#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08
+
+/* s390 CCW devices */
+struct ccw_device_id {
+ __u16 match_flags; /* which fields to match against */
+
+ __u16 cu_type; /* control unit type */
+ __u16 dev_type; /* device type */
+ __u8 cu_model; /* control unit model */
+ __u8 dev_model; /* device model */
+
+ kernel_ulong_t driver_info;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_CCW_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_CDX_H
+#define LINUX_DEVICE_ID_CDX_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define CDX_ANY_ID (0xFFFF)
+
+enum {
+ CDX_ID_F_VFIO_DRIVER_OVERRIDE = 1,
+};
+
+/**
+ * struct cdx_device_id - CDX device identifier
+ * @vendor: Vendor ID
+ * @device: Device ID
+ * @subvendor: Subsystem vendor ID (or CDX_ANY_ID)
+ * @subdevice: Subsystem device ID (or CDX_ANY_ID)
+ * @class: Device class
+ * Most drivers do not need to specify class/class_mask
+ * as vendor/device is normally sufficient.
+ * @class_mask: Limit which sub-fields of the class field are compared.
+ * @override_only: Match only when dev->driver_override is this driver.
+ *
+ * Type of entries in the "device Id" table for CDX devices supported by
+ * a CDX device driver.
+ */
+struct cdx_device_id {
+ __u16 vendor;
+ __u16 device;
+ __u16 subvendor;
+ __u16 subdevice;
+ __u32 class;
+ __u32 class_mask;
+ __u32 override_only;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_CDX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_COREBOOT_H
+#define LINUX_DEVICE_ID_COREBOOT_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/**
+ * struct coreboot_device_id - Identifies a coreboot table entry
+ * @tag: tag ID
+ * @driver_data: driver specific data
+ */
+struct coreboot_device_id {
+ __u32 tag;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_COREBOOT_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_CSS_H
+#define LINUX_DEVICE_ID_CSS_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* s390 css bus devices (subchannels) */
+struct css_device_id {
+ __u8 match_flags;
+ __u8 type; /* subchannel type */
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_CSS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_DFL_H
+#define LINUX_DEVICE_ID_DFL_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/*
+ * DFL (Device Feature List)
+ *
+ * DFL defines a linked list of feature headers within the device MMIO space to
+ * provide an extensible way of adding features. Software can walk through these
+ * predefined data structures to enumerate features. It is now used in the FPGA.
+ * See Documentation/fpga/dfl.rst for more information.
+ *
+ * The dfl bus type is introduced to match the individual feature devices (dfl
+ * devices) for specific dfl drivers.
+ */
+
+/**
+ * struct dfl_device_id - dfl device identifier
+ * @type: DFL FIU type of the device. See enum dfl_id_type.
+ * @feature_id: feature identifier local to its DFL FIU type.
+ * @driver_data: driver specific data.
+ */
+struct dfl_device_id {
+ __u16 type;
+ __u16 feature_id;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_DFL_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_DMI_H
+#define LINUX_DEVICE_ID_DMI_H
+
+#define DMI_MATCH(a, b) { .slot = a, .substr = b }
+#define DMI_EXACT_MATCH(a, b) { .slot = a, .substr = b, .exact_match = 1 }
+
+/* dmi */
+enum dmi_field {
+ DMI_NONE,
+ DMI_BIOS_VENDOR,
+ DMI_BIOS_VERSION,
+ DMI_BIOS_DATE,
+ DMI_BIOS_RELEASE,
+ DMI_EC_FIRMWARE_RELEASE,
+ DMI_SYS_VENDOR,
+ DMI_PRODUCT_NAME,
+ DMI_PRODUCT_VERSION,
+ DMI_PRODUCT_SERIAL,
+ DMI_PRODUCT_UUID,
+ DMI_PRODUCT_SKU,
+ DMI_PRODUCT_FAMILY,
+ DMI_BOARD_VENDOR,
+ DMI_BOARD_NAME,
+ DMI_BOARD_VERSION,
+ DMI_BOARD_SERIAL,
+ DMI_BOARD_ASSET_TAG,
+ DMI_CHASSIS_VENDOR,
+ DMI_CHASSIS_TYPE,
+ DMI_CHASSIS_VERSION,
+ DMI_CHASSIS_SERIAL,
+ DMI_CHASSIS_ASSET_TAG,
+ DMI_STRING_MAX,
+ DMI_OEM_STRING, /* special case - will not be in dmi_ident */
+};
+
+struct dmi_strmatch {
+ unsigned char slot:7;
+ unsigned char exact_match:1;
+ char substr[79];
+};
+
+struct dmi_system_id {
+ int (*callback)(const struct dmi_system_id *);
+ const char *ident;
+ struct dmi_strmatch matches[4];
+ void *driver_data;
+};
+
+/*
+ * struct dmi_device_id appears during expansion of
+ * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
+ * but this is enough for gcc 3.4.6 to error out:
+ * error: storage size of '__mod_dmi_device_table' isn't known
+ */
+#define dmi_device_id dmi_system_id
+
+#endif /* ifndef LINUX_DEVICE_ID_DMI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_EISA_H
+#define LINUX_DEVICE_ID_EISA_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* EISA */
+
+#define EISA_SIG_LEN 8
+
+/* The EISA signature, in ASCII form, null terminated */
+struct eisa_device_id {
+ char sig[EISA_SIG_LEN];
+ kernel_ulong_t driver_data;
+};
+
+#define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
+
+#endif /* ifndef LINUX_DEVICE_ID_EISA_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_FSL_MC_H
+#define LINUX_DEVICE_ID_FSL_MC_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+/**
+ * struct fsl_mc_device_id - MC object device identifier
+ * @vendor: vendor ID
+ * @obj_type: MC object type
+ *
+ * Type of entries in the "device Id" table for MC object devices supported by
+ * a MC object device driver. The last entry of the table has vendor set to 0x0
+ */
+struct fsl_mc_device_id {
+ __u16 vendor;
+ const char obj_type[16];
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_FSL_MC_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_HDA_H
+#define LINUX_DEVICE_ID_HDA_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+struct hda_device_id {
+ __u32 vendor_id;
+ __u32 rev_id;
+ __u8 api_version;
+ const char *name;
+ unsigned long driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_HDA_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_HID_H
+#define LINUX_DEVICE_ID_HID_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define HID_ANY_ID (~0)
+#define HID_BUS_ANY 0xffff
+#define HID_GROUP_ANY 0x0000
+
+struct hid_device_id {
+ __u16 bus;
+ __u16 group;
+ __u32 vendor;
+ __u32 product;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_HID_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_HV_VMBUS_H
+#define LINUX_DEVICE_ID_HV_VMBUS_H
+
+#ifdef __KERNEL__
+#include <linux/uuid.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/*
+ * For Hyper-V devices we use the device guid as the id.
+ */
+struct hv_vmbus_device_id {
+ guid_t guid;
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_HV_VMBUS_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_I2C_H
+#define LINUX_DEVICE_ID_I2C_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* i2c */
+
+#define I2C_NAME_SIZE 20
+#define I2C_MODULE_PREFIX "i2c:"
+
+struct i2c_device_id {
+ char name[I2C_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_I2C_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_I3C_H
+#define LINUX_DEVICE_ID_I3C_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+/* i3c */
+
+#define I3C_MATCH_DCR 0x1
+#define I3C_MATCH_MANUF 0x2
+#define I3C_MATCH_PART 0x4
+#define I3C_MATCH_EXTRA_INFO 0x8
+
+struct i3c_device_id {
+ __u8 match_flags;
+ __u8 dcr;
+ __u16 manuf_id;
+ __u16 part_id;
+ __u16 extra_info;
+
+ const void *data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_I3C_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_IEEE1394_H
+#define LINUX_DEVICE_ID_IEEE1394_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define IEEE1394_MATCH_VENDOR_ID 0x0001
+#define IEEE1394_MATCH_MODEL_ID 0x0002
+#define IEEE1394_MATCH_SPECIFIER_ID 0x0004
+#define IEEE1394_MATCH_VERSION 0x0008
+
+struct ieee1394_device_id {
+ __u32 match_flags;
+ __u32 vendor_id;
+ __u32 model_id;
+ __u32 specifier_id;
+ __u32 version;
+ union {
+ kernel_ulong_t driver_data;
+ const void *driver_data_ptr;
+ };
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_IEEE1394_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_INPUT_H
+#define LINUX_DEVICE_ID_INPUT_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* Input */
+#define INPUT_DEVICE_ID_EV_MAX 0x1f
+#define INPUT_DEVICE_ID_KEY_MIN_INTERESTING 0x71
+#define INPUT_DEVICE_ID_KEY_MAX 0x2ff
+#define INPUT_DEVICE_ID_REL_MAX 0x0f
+#define INPUT_DEVICE_ID_ABS_MAX 0x3f
+#define INPUT_DEVICE_ID_MSC_MAX 0x07
+#define INPUT_DEVICE_ID_LED_MAX 0x0f
+#define INPUT_DEVICE_ID_SND_MAX 0x07
+#define INPUT_DEVICE_ID_FF_MAX 0x7f
+#define INPUT_DEVICE_ID_SW_MAX 0x11
+#define INPUT_DEVICE_ID_PROP_MAX 0x1f
+
+#define INPUT_DEVICE_ID_MATCH_BUS 1
+#define INPUT_DEVICE_ID_MATCH_VENDOR 2
+#define INPUT_DEVICE_ID_MATCH_PRODUCT 4
+#define INPUT_DEVICE_ID_MATCH_VERSION 8
+
+#define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010
+#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020
+#define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040
+#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080
+#define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100
+#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200
+#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400
+#define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800
+#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000
+#define INPUT_DEVICE_ID_MATCH_PROPBIT 0x2000
+
+struct input_device_id {
+
+ kernel_ulong_t flags;
+
+ __u16 bustype;
+ __u16 vendor;
+ __u16 product;
+ __u16 version;
+
+ kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
+ kernel_ulong_t propbit[INPUT_DEVICE_ID_PROP_MAX / BITS_PER_LONG + 1];
+
+ kernel_ulong_t driver_info;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_INPUT_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_IPACK_H
+#define LINUX_DEVICE_ID_IPACK_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define IPACK_ANY_FORMAT 0xff
+#define IPACK_ANY_ID (~0)
+struct ipack_device_id {
+ __u8 format; /* Format version or IPACK_ANY_ID */
+ __u32 vendor; /* Vendor ID or IPACK_ANY_ID */
+ __u32 device; /* Device ID or IPACK_ANY_ID */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_IPACK_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_ISAPNP_H
+#define LINUX_DEVICE_ID_ISAPNP_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define ISAPNP_ANY_ID 0xffff
+struct isapnp_device_id {
+ unsigned short card_vendor, card_device;
+ unsigned short vendor, function;
+ kernel_ulong_t driver_data; /* data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_ISAPNP_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_ISHTP_H
+#define LINUX_DEVICE_ID_ISHTP_H
+
+#ifdef __KERNEL__
+#include <linux/uuid.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* ISHTP (Integrated Sensor Hub Transport Protocol) */
+
+#define ISHTP_MODULE_PREFIX "ishtp:"
+
+/**
+ * struct ishtp_device_id - ISHTP device identifier
+ * @guid: GUID of the device.
+ * @driver_data: pointer to driver specific data
+ */
+struct ishtp_device_id {
+ guid_t guid;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_ISHTP_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_MCB_H
+#define LINUX_DEVICE_ID_MCB_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+struct mcb_device_id {
+ __u16 device;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_MCB_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_MDIO_H
+#define LINUX_DEVICE_ID_MDIO_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define MDIO_MODULE_PREFIX "mdio:"
+
+#define MDIO_ID_FMT "%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u"
+#define MDIO_ID_ARGS(_id) \
+ ((_id)>>31) & 1, ((_id)>>30) & 1, ((_id)>>29) & 1, ((_id)>>28) & 1, \
+ ((_id)>>27) & 1, ((_id)>>26) & 1, ((_id)>>25) & 1, ((_id)>>24) & 1, \
+ ((_id)>>23) & 1, ((_id)>>22) & 1, ((_id)>>21) & 1, ((_id)>>20) & 1, \
+ ((_id)>>19) & 1, ((_id)>>18) & 1, ((_id)>>17) & 1, ((_id)>>16) & 1, \
+ ((_id)>>15) & 1, ((_id)>>14) & 1, ((_id)>>13) & 1, ((_id)>>12) & 1, \
+ ((_id)>>11) & 1, ((_id)>>10) & 1, ((_id)>>9) & 1, ((_id)>>8) & 1, \
+ ((_id)>>7) & 1, ((_id)>>6) & 1, ((_id)>>5) & 1, ((_id)>>4) & 1, \
+ ((_id)>>3) & 1, ((_id)>>2) & 1, ((_id)>>1) & 1, (_id) & 1
+
+/**
+ * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus
+ * @phy_id: The result of
+ * (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&MII_PHYSID2)) & @phy_id_mask
+ * for this PHY type
+ * @phy_id_mask: Defines the significant bits of @phy_id. A value of 0
+ * is used to terminate an array of struct mdio_device_id.
+ */
+struct mdio_device_id {
+ __u32 phy_id;
+ __u32 phy_id_mask;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_MDIO_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_MEI_CL_H
+#define LINUX_DEVICE_ID_MEI_CL_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/mei_uuid.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define MEI_CL_MODULE_PREFIX "mei:"
+#define MEI_CL_NAME_SIZE 32
+#define MEI_CL_VERSION_ANY 0xff
+
+/**
+ * struct mei_cl_device_id - MEI client device identifier
+ * @name: helper name
+ * @uuid: client uuid
+ * @version: client protocol version
+ * @driver_info: information used by the driver.
+ *
+ * identifies mei client device by uuid and name
+ */
+struct mei_cl_device_id {
+ char name[MEI_CL_NAME_SIZE];
+ uuid_le uuid;
+ __u8 version;
+ kernel_ulong_t driver_info;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_MEI_CL_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_MHI_H
+#define LINUX_DEVICE_ID_MHI_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define MHI_DEVICE_MODALIAS_FMT "mhi:%s"
+#define MHI_NAME_SIZE 32
+
+#define MHI_EP_DEVICE_MODALIAS_FMT "mhi_ep:%s"
+
+/**
+ * struct mhi_device_id - MHI device identification
+ * @chan: MHI channel name
+ * @driver_data: driver data;
+ */
+struct mhi_device_id {
+ const char chan[MHI_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_MHI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_MIPS_CDMM_H
+#define LINUX_DEVICE_ID_MIPS_CDMM_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+/**
+ * struct mips_cdmm_device_id - identifies devices in MIPS CDMM bus
+ * @type: Device type identifier.
+ */
+struct mips_cdmm_device_id {
+ __u8 type;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_MIPS_CDMM_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_OF_H
+#define LINUX_DEVICE_ID_OF_H
+
+/*
+ * Struct used for matching a device
+ */
+struct of_device_id {
+ char name[32];
+ char type[32];
+ char compatible[128];
+ const void *data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_OF_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_PARISC_H
+#define LINUX_DEVICE_ID_PARISC_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define PA_HWTYPE_ANY_ID 0xff
+#define PA_HVERSION_REV_ANY_ID 0xff
+#define PA_HVERSION_ANY_ID 0xffff
+#define PA_SVERSION_ANY_ID 0xffffffff
+
+struct parisc_device_id {
+ __u8 hw_type; /* 5 bits used */
+ __u8 hversion_rev; /* 4 bits */
+ __u16 hversion; /* 12 bits */
+ __u32 sversion; /* 20 bits */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_PARISC_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_PCI_H
+#define LINUX_DEVICE_ID_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define PCI_ANY_ID (~0)
+
+enum {
+ PCI_ID_F_VFIO_DRIVER_OVERRIDE = 1,
+};
+
+/**
+ * struct pci_device_id - PCI device ID structure
+ * @vendor: Vendor ID to match (or PCI_ANY_ID)
+ * @device: Device ID to match (or PCI_ANY_ID)
+ * @subvendor: Subsystem vendor ID to match (or PCI_ANY_ID)
+ * @subdevice: Subsystem device ID to match (or PCI_ANY_ID)
+ * @class: Device class, subclass, and "interface" to match.
+ * See Appendix D of the PCI Local Bus Spec or
+ * include/linux/pci_ids.h for a full list of classes.
+ * Most drivers do not need to specify class/class_mask
+ * as vendor/device is normally sufficient.
+ * @class_mask: Limit which sub-fields of the class field are compared.
+ * See drivers/scsi/sym53c8xx_2/ for example of usage.
+ * @driver_data: Data private to the driver.
+ * Most drivers don't need to use driver_data field.
+ * Best practice is to use driver_data as an index
+ * into a static list of equivalent device types,
+ * instead of using it as a pointer.
+ * @override_only: Match only when dev->driver_override is this driver.
+ */
+struct pci_device_id {
+ __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
+ __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ __u32 class, class_mask; /* (class,subclass,prog-if) triplet */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+ __u32 override_only;
+};
+
+/* pci_epf */
+
+#define PCI_EPF_NAME_SIZE 20
+#define PCI_EPF_MODULE_PREFIX "pci_epf:"
+
+struct pci_epf_device_id {
+ char name[PCI_EPF_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_PCI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_PCMCIA_H
+#define LINUX_DEVICE_ID_PCMCIA_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* PCMCIA */
+
+#define PCMCIA_DEV_ID_MATCH_MANF_ID 0x0001
+#define PCMCIA_DEV_ID_MATCH_CARD_ID 0x0002
+#define PCMCIA_DEV_ID_MATCH_FUNC_ID 0x0004
+#define PCMCIA_DEV_ID_MATCH_FUNCTION 0x0008
+#define PCMCIA_DEV_ID_MATCH_PROD_ID1 0x0010
+#define PCMCIA_DEV_ID_MATCH_PROD_ID2 0x0020
+#define PCMCIA_DEV_ID_MATCH_PROD_ID3 0x0040
+#define PCMCIA_DEV_ID_MATCH_PROD_ID4 0x0080
+#define PCMCIA_DEV_ID_MATCH_DEVICE_NO 0x0100
+#define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
+#define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400
+
+struct pcmcia_device_id {
+ __u16 match_flags;
+
+ __u16 manf_id;
+ __u16 card_id;
+
+ __u8 func_id;
+
+ /* for real multi-function devices */
+ __u8 function;
+
+ /* for pseudo multi-function devices */
+ __u8 device_no;
+
+ __u32 prod_id_hash[4];
+
+ /* not matched against in kernelspace */
+ const char * prod_id[4];
+
+ /* not matched against */
+ kernel_ulong_t driver_info;
+ char * cisfile;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_PCMCIA_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_PLATFORM_H
+#define LINUX_DEVICE_ID_PLATFORM_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define PLATFORM_NAME_SIZE 24
+#define PLATFORM_MODULE_PREFIX "platform:"
+
+struct platform_device_id {
+ char name[PLATFORM_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_PLATFORM_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_PNP_H
+#define LINUX_DEVICE_ID_PNP_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define PNP_ID_LEN 8
+#define PNP_MAX_DEVICES 8
+
+struct pnp_device_id {
+ __u8 id[PNP_ID_LEN];
+ kernel_ulong_t driver_data;
+};
+
+struct pnp_card_device_id {
+ __u8 id[PNP_ID_LEN];
+ kernel_ulong_t driver_data;
+ struct {
+ __u8 id[PNP_ID_LEN];
+ } devs[PNP_MAX_DEVICES];
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_PNP_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_RIO_H
+#define LINUX_DEVICE_ID_RIO_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+/* RapidIO */
+
+#define RIO_ANY_ID 0xffff
+
+/**
+ * struct rio_device_id - RIO device identifier
+ * @did: RapidIO device ID
+ * @vid: RapidIO vendor ID
+ * @asm_did: RapidIO assembly device ID
+ * @asm_vid: RapidIO assembly vendor ID
+ *
+ * Identifies a RapidIO device based on both the device/vendor IDs and
+ * the assembly device/vendor IDs.
+ */
+struct rio_device_id {
+ __u16 did, vid;
+ __u16 asm_did, asm_vid;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_RIO_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_RPMSG_H
+#define LINUX_DEVICE_ID_RPMSG_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* rpmsg */
+
+#define RPMSG_NAME_SIZE 32
+#define RPMSG_DEVICE_MODALIAS_FMT "rpmsg:%s"
+
+struct rpmsg_device_id {
+ char name[RPMSG_NAME_SIZE];
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_RPMSG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SDIO_H
+#define LINUX_DEVICE_ID_SDIO_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* SDIO */
+
+#define SDIO_ANY_ID (~0)
+
+struct sdio_device_id {
+ __u8 class; /* Standard interface or SDIO_ANY_ID */
+ __u16 vendor; /* Vendor or SDIO_ANY_ID */
+ __u16 device; /* Device ID or SDIO_ANY_ID */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_SDIO_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SDW_H
+#define LINUX_DEVICE_ID_SDW_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+struct sdw_device_id {
+ __u16 mfg_id;
+ __u16 part_id;
+ __u8 sdw_version;
+ __u8 class_id;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_SDW_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SERIO_H
+#define LINUX_DEVICE_ID_SERIO_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define SERIO_ANY 0xff
+
+struct serio_device_id {
+ __u8 type;
+ __u8 extra;
+ __u8 id;
+ __u8 proto;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_SERIO_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SLIM_H
+#define LINUX_DEVICE_ID_SLIM_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* SLIMbus */
+
+#define SLIMBUS_NAME_SIZE 32
+#define SLIMBUS_MODULE_PREFIX "slim:"
+
+struct slim_device_id {
+ __u16 manf_id, prod_code;
+ __u16 dev_index, instance;
+
+ /* Data private to the driver */
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_SLIM_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SPI_H
+#define LINUX_DEVICE_ID_SPI_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* spi */
+
+#define SPI_NAME_SIZE 32
+#define SPI_MODULE_PREFIX "spi:"
+
+struct spi_device_id {
+ char name[SPI_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_SPI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SPMI_H
+#define LINUX_DEVICE_ID_SPMI_H
+
+#ifdef __KERNEL__
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define SPMI_NAME_SIZE 32
+#define SPMI_MODULE_PREFIX "spmi:"
+
+struct spmi_device_id {
+ char name[SPMI_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_SPMI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SSAM_H
+#define LINUX_DEVICE_ID_SSAM_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* Surface System Aggregator Module */
+
+#define SSAM_MATCH_TARGET 0x1
+#define SSAM_MATCH_INSTANCE 0x2
+#define SSAM_MATCH_FUNCTION 0x4
+
+struct ssam_device_id {
+ __u8 match_flags;
+
+ __u8 domain;
+ __u8 category;
+ __u8 target;
+ __u8 instance;
+ __u8 function;
+
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_SSAM_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_SSB_H
+#define LINUX_DEVICE_ID_SSB_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define SSB_ANY_VENDOR 0xFFFF
+#define SSB_ANY_ID 0xFFFF
+#define SSB_ANY_REV 0xFF
+
+/* SSB core, see drivers/ssb/ */
+struct ssb_device_id {
+ __u16 vendor;
+ __u16 coreid;
+ __u8 revision;
+ __u8 __pad;
+} __attribute__((packed, aligned(2)));
+
+#define SSB_DEVICE(_vendor, _coreid, _revision) \
+ { .vendor = _vendor, .coreid = _coreid, .revision = _revision }
+
+#endif /* ifndef LINUX_DEVICE_ID_SSB_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_TB_H
+#define LINUX_DEVICE_ID_TB_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define TBSVC_MATCH_PROTOCOL_KEY 0x0001
+#define TBSVC_MATCH_PROTOCOL_ID 0x0002
+#define TBSVC_MATCH_PROTOCOL_VERSION 0x0004
+#define TBSVC_MATCH_PROTOCOL_REVISION 0x0008
+
+/**
+ * struct tb_service_id - Thunderbolt service identifiers
+ * @match_flags: Flags used to match the structure
+ * @protocol_key: Protocol key the service supports
+ * @protocol_id: Protocol id the service supports
+ * @protocol_version: Version of the protocol
+ * @protocol_revision: Revision of the protocol software
+ * @driver_data: Driver specific data
+ *
+ * Thunderbolt XDomain services are exposed as devices where each device
+ * carries the protocol information the service supports. Thunderbolt
+ * XDomain service drivers match against that information.
+ */
+struct tb_service_id {
+ __u32 match_flags;
+ char protocol_key[8 + 1];
+ __u32 protocol_id;
+ __u32 protocol_version;
+ __u32 protocol_revision;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_TB_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_TEE_CLIENT_H
+#define LINUX_DEVICE_ID_TEE_CLIENT_H
+
+#ifdef __KERNEL__
+#include <linux/uuid.h>
+#endif
+
+/**
+ * struct tee_client_device_id - tee based device identifier
+ * @uuid: For TEE based client devices we use the device uuid as
+ * the identifier.
+ */
+struct tee_client_device_id {
+ uuid_t uuid;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_TEE_CLIENT_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_TYPEC_H
+#define LINUX_DEVICE_ID_TYPEC_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* USB Type-C Alternate Modes */
+
+#define TYPEC_ANY_MODE 0x7
+
+/**
+ * struct typec_device_id - USB Type-C alternate mode identifiers
+ * @svid: Standard or Vendor ID
+ * @mode: Mode index
+ * @driver_data: Driver specific data
+ */
+struct typec_device_id {
+ __u16 svid;
+ __u8 mode;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_TYPEC_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_ULPI_H
+#define LINUX_DEVICE_ID_ULPI_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+struct ulpi_device_id {
+ __u16 vendor;
+ __u16 product;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_ULPI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_USB_H
+#define LINUX_DEVICE_ID_USB_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/*
+ * Device table entry for "new style" table-driven USB drivers.
+ * User mode code can read these tables to choose which modules to load.
+ * Declare the table as a MODULE_DEVICE_TABLE.
+ *
+ * A probe() parameter will point to a matching entry from this table.
+ * Use the driver_info field for each match to hold information tied
+ * to that match: device quirks, etc.
+ *
+ * Terminate the driver's table with an all-zeroes entry.
+ * Use the flag values to control which fields are compared.
+ */
+
+/**
+ * struct usb_device_id - identifies USB devices for probing and hotplugging
+ * @match_flags: Bit mask controlling which of the other fields are used to
+ * match against new devices. Any field except for driver_info may be
+ * used, although some only make sense in conjunction with other fields.
+ * This is usually set by a USB_DEVICE_*() macro, which sets all
+ * other fields in this structure except for driver_info.
+ * @idVendor: USB vendor ID for a device; numbers are assigned
+ * by the USB forum to its members.
+ * @idProduct: Vendor-assigned product ID.
+ * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
+ * This is also used to identify individual product versions, for
+ * a range consisting of a single device.
+ * @bcdDevice_hi: High end of version number range. The range of product
+ * versions is inclusive.
+ * @bDeviceClass: Class of device; numbers are assigned
+ * by the USB forum. Products may choose to implement classes,
+ * or be vendor-specific. Device classes specify behavior of all
+ * the interfaces on a device.
+ * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
+ * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
+ * @bInterfaceClass: Class of interface; numbers are assigned
+ * by the USB forum. Products may choose to implement classes,
+ * or be vendor-specific. Interface classes specify behavior only
+ * of a given interface; other interfaces may support other classes.
+ * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
+ * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
+ * @bInterfaceNumber: Number of interface; composite devices may use
+ * fixed interface numbers to differentiate between vendor-specific
+ * interfaces.
+ * @driver_info: Holds information used by the driver. Usually it holds
+ * a pointer to a descriptor understood by the driver, or perhaps
+ * device flags.
+ *
+ * In most cases, drivers will create a table of device IDs by using
+ * USB_DEVICE(), or similar macros designed for that purpose.
+ * They will then export it to userspace using MODULE_DEVICE_TABLE(),
+ * and provide it to the USB core through their usb_driver structure.
+ *
+ * See the usb_match_id() function for information about how matches are
+ * performed. Briefly, you will normally use one of several macros to help
+ * construct these entries. Each entry you provide will either identify
+ * one or more specific products, or will identify a class of products
+ * which have agreed to behave the same. You should put the more specific
+ * matches towards the beginning of your table, so that driver_info can
+ * record quirks of specific products.
+ */
+struct usb_device_id {
+ /* which fields to match against? */
+ __u16 match_flags;
+
+ /* Used for product specific matches; range is inclusive */
+ __u16 idVendor;
+ __u16 idProduct;
+ __u16 bcdDevice_lo;
+ __u16 bcdDevice_hi;
+
+ /* Used for device class matches */
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+
+ /* Used for interface class matches */
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+
+ /* Used for vendor-specific interface matches */
+ __u8 bInterfaceNumber;
+
+ /* not matched against */
+ kernel_ulong_t driver_info
+ __attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+/* Some useful macros to use to create struct usb_device_id */
+#define USB_DEVICE_ID_MATCH_VENDOR 0x0001
+#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
+#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
+#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
+#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
+#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
+#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
+#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
+#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
+#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
+#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400
+
+#endif /* ifndef LINUX_DEVICE_ID_USB_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_VCHIQ_H
+#define LINUX_DEVICE_ID_VCHIQ_H
+
+struct vchiq_device_id {
+ char name[32];
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_VCHIQ_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_VIO_H
+#define LINUX_DEVICE_ID_VIO_H
+
+/* VIO */
+struct vio_device_id {
+ char type[32];
+ char compat[32];
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_VIO_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_VIRTIO_H
+#define LINUX_DEVICE_ID_VIRTIO_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+#define VIRTIO_DEV_ANY_ID 0xffffffff
+
+struct virtio_device_id {
+ __u32 device;
+ __u32 vendor;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_VIRTIO_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_WMI_H
+#define LINUX_DEVICE_ID_WMI_H
+
+/* WMI */
+
+#define WMI_MODULE_PREFIX "wmi:"
+
+/**
+ * struct wmi_device_id - WMI device identifier
+ * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
+ * @context: pointer to driver specific data
+ */
+struct wmi_device_id {
+ const char guid_string[UUID_STRING_LEN+1];
+ const void *context;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_WMI_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_X86_CPU_H
+#define LINUX_DEVICE_ID_X86_CPU_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+/* Wild cards for x86_cpu_id::vendor, family, model and feature */
+#define X86_VENDOR_ANY 0xffff
+#define X86_FAMILY_ANY 0
+#define X86_MODEL_ANY 0
+#define X86_STEPPING_ANY 0
+#define X86_STEP_MIN 0
+#define X86_STEP_MAX 0xf
+#define X86_PLATFORM_ANY 0x0
+#define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */
+#define X86_CPU_TYPE_ANY 0
+
+/*
+ * Match x86 CPUs for CPU specific drivers.
+ * See documentation of "x86_match_cpu" for details.
+ */
+
+/*
+ * MODULE_DEVICE_TABLE expects this struct to be called x86cpu_device_id.
+ * Although gcc seems to ignore this error, clang fails without this define.
+ */
+#define x86cpu_device_id x86_cpu_id
+struct x86_cpu_id {
+ __u16 vendor;
+ __u16 family;
+ __u16 model;
+ __u16 steppings;
+ __u16 feature; /* bit index */
+ /* Solely for kernel-internal use: DO NOT EXPORT to userspace! */
+ __u16 flags;
+ __u8 platform_mask;
+ __u8 type;
+ kernel_ulong_t driver_data;
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_X86_CPU_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_DEVICE_ID_ZORRO_H
+#define LINUX_DEVICE_ID_ZORRO_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define ZORRO_WILDCARD (0xffffffff) /* not official */
+
+#define ZORRO_DEVICE_MODALIAS_FMT "zorro:i%08X"
+
+struct zorro_device_id {
+ __u32 id; /* Device ID or ZORRO_WILDCARD */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* ifndef LINUX_DEVICE_ID_ZORRO_H */
#define LINUX_MOD_DEVICETABLE_H
#ifdef __KERNEL__
-#include <linux/mei.h>
#include <linux/types.h>
-#include <linux/uuid.h>
-typedef unsigned long kernel_ulong_t;
#endif
-#define PCI_ANY_ID (~0)
-
-enum {
- PCI_ID_F_VFIO_DRIVER_OVERRIDE = 1,
-};
-
-/**
- * struct pci_device_id - PCI device ID structure
- * @vendor: Vendor ID to match (or PCI_ANY_ID)
- * @device: Device ID to match (or PCI_ANY_ID)
- * @subvendor: Subsystem vendor ID to match (or PCI_ANY_ID)
- * @subdevice: Subsystem device ID to match (or PCI_ANY_ID)
- * @class: Device class, subclass, and "interface" to match.
- * See Appendix D of the PCI Local Bus Spec or
- * include/linux/pci_ids.h for a full list of classes.
- * Most drivers do not need to specify class/class_mask
- * as vendor/device is normally sufficient.
- * @class_mask: Limit which sub-fields of the class field are compared.
- * See drivers/scsi/sym53c8xx_2/ for example of usage.
- * @driver_data: Data private to the driver.
- * Most drivers don't need to use driver_data field.
- * Best practice is to use driver_data as an index
- * into a static list of equivalent device types,
- * instead of using it as a pointer.
- * @override_only: Match only when dev->driver_override is this driver.
- */
-struct pci_device_id {
- __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
- __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
- __u32 class, class_mask; /* (class,subclass,prog-if) triplet */
- kernel_ulong_t driver_data; /* Data private to the driver */
- __u32 override_only;
-};
-
-
-#define IEEE1394_MATCH_VENDOR_ID 0x0001
-#define IEEE1394_MATCH_MODEL_ID 0x0002
-#define IEEE1394_MATCH_SPECIFIER_ID 0x0004
-#define IEEE1394_MATCH_VERSION 0x0008
-
-struct ieee1394_device_id {
- __u32 match_flags;
- __u32 vendor_id;
- __u32 model_id;
- __u32 specifier_id;
- __u32 version;
- union {
- kernel_ulong_t driver_data;
- const void *driver_data_ptr;
- };
-};
-
-
-/*
- * Device table entry for "new style" table-driven USB drivers.
- * User mode code can read these tables to choose which modules to load.
- * Declare the table as a MODULE_DEVICE_TABLE.
- *
- * A probe() parameter will point to a matching entry from this table.
- * Use the driver_info field for each match to hold information tied
- * to that match: device quirks, etc.
- *
- * Terminate the driver's table with an all-zeroes entry.
- * Use the flag values to control which fields are compared.
- */
-
-/**
- * struct usb_device_id - identifies USB devices for probing and hotplugging
- * @match_flags: Bit mask controlling which of the other fields are used to
- * match against new devices. Any field except for driver_info may be
- * used, although some only make sense in conjunction with other fields.
- * This is usually set by a USB_DEVICE_*() macro, which sets all
- * other fields in this structure except for driver_info.
- * @idVendor: USB vendor ID for a device; numbers are assigned
- * by the USB forum to its members.
- * @idProduct: Vendor-assigned product ID.
- * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
- * This is also used to identify individual product versions, for
- * a range consisting of a single device.
- * @bcdDevice_hi: High end of version number range. The range of product
- * versions is inclusive.
- * @bDeviceClass: Class of device; numbers are assigned
- * by the USB forum. Products may choose to implement classes,
- * or be vendor-specific. Device classes specify behavior of all
- * the interfaces on a device.
- * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
- * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
- * @bInterfaceClass: Class of interface; numbers are assigned
- * by the USB forum. Products may choose to implement classes,
- * or be vendor-specific. Interface classes specify behavior only
- * of a given interface; other interfaces may support other classes.
- * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
- * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
- * @bInterfaceNumber: Number of interface; composite devices may use
- * fixed interface numbers to differentiate between vendor-specific
- * interfaces.
- * @driver_info: Holds information used by the driver. Usually it holds
- * a pointer to a descriptor understood by the driver, or perhaps
- * device flags.
- *
- * In most cases, drivers will create a table of device IDs by using
- * USB_DEVICE(), or similar macros designed for that purpose.
- * They will then export it to userspace using MODULE_DEVICE_TABLE(),
- * and provide it to the USB core through their usb_driver structure.
- *
- * See the usb_match_id() function for information about how matches are
- * performed. Briefly, you will normally use one of several macros to help
- * construct these entries. Each entry you provide will either identify
- * one or more specific products, or will identify a class of products
- * which have agreed to behave the same. You should put the more specific
- * matches towards the beginning of your table, so that driver_info can
- * record quirks of specific products.
- */
-struct usb_device_id {
- /* which fields to match against? */
- __u16 match_flags;
-
- /* Used for product specific matches; range is inclusive */
- __u16 idVendor;
- __u16 idProduct;
- __u16 bcdDevice_lo;
- __u16 bcdDevice_hi;
-
- /* Used for device class matches */
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
-
- /* Used for interface class matches */
- __u8 bInterfaceClass;
- __u8 bInterfaceSubClass;
- __u8 bInterfaceProtocol;
-
- /* Used for vendor-specific interface matches */
- __u8 bInterfaceNumber;
-
- /* not matched against */
- kernel_ulong_t driver_info
- __attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-/* Some useful macros to use to create struct usb_device_id */
-#define USB_DEVICE_ID_MATCH_VENDOR 0x0001
-#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
-#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
-#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
-#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
-#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
-#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
-#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
-#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
-#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
-#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400
-
-#define HID_ANY_ID (~0)
-#define HID_BUS_ANY 0xffff
-#define HID_GROUP_ANY 0x0000
-
-struct hid_device_id {
- __u16 bus;
- __u16 group;
- __u32 vendor;
- __u32 product;
- kernel_ulong_t driver_data;
-};
-
-/* s390 CCW devices */
-struct ccw_device_id {
- __u16 match_flags; /* which fields to match against */
-
- __u16 cu_type; /* control unit type */
- __u16 dev_type; /* device type */
- __u8 cu_model; /* control unit model */
- __u8 dev_model; /* device model */
-
- kernel_ulong_t driver_info;
-};
-
-#define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01
-#define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02
-#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04
-#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08
-
-/* s390 AP bus devices */
-struct ap_device_id {
- __u16 match_flags; /* which fields to match against */
- __u8 dev_type; /* device type */
- kernel_ulong_t driver_info;
-};
-
-#define AP_DEVICE_ID_MATCH_CARD_TYPE 0x01
-#define AP_DEVICE_ID_MATCH_QUEUE_TYPE 0x02
-
-/* s390 css bus devices (subchannels) */
-struct css_device_id {
- __u8 match_flags;
- __u8 type; /* subchannel type */
- kernel_ulong_t driver_data;
-};
-
-#define ACPI_ID_LEN 16
-
-struct acpi_device_id {
- __u8 id[ACPI_ID_LEN];
- kernel_ulong_t driver_data;
- __u32 cls;
- __u32 cls_msk;
-};
-
-/**
- * ACPI_DEVICE_CLASS - macro used to describe an ACPI device with
- * the PCI-defined class-code information
- *
- * @_cls : the class, subclass, prog-if triple for this device
- * @_msk : the class mask for this device
- *
- * This macro is used to create a struct acpi_device_id that matches a
- * specific PCI class. The .id and .driver_data fields will be left
- * initialized with the default value.
- */
-#define ACPI_DEVICE_CLASS(_cls, _msk) .cls = (_cls), .cls_msk = (_msk),
-
-#define PNP_ID_LEN 8
-#define PNP_MAX_DEVICES 8
-
-struct pnp_device_id {
- __u8 id[PNP_ID_LEN];
- kernel_ulong_t driver_data;
-};
-
-struct pnp_card_device_id {
- __u8 id[PNP_ID_LEN];
- kernel_ulong_t driver_data;
- struct {
- __u8 id[PNP_ID_LEN];
- } devs[PNP_MAX_DEVICES];
-};
-
-
-#define SERIO_ANY 0xff
-
-struct serio_device_id {
- __u8 type;
- __u8 extra;
- __u8 id;
- __u8 proto;
-};
-
-struct hda_device_id {
- __u32 vendor_id;
- __u32 rev_id;
- __u8 api_version;
- const char *name;
- unsigned long driver_data;
-};
-
-struct sdw_device_id {
- __u16 mfg_id;
- __u16 part_id;
- __u8 sdw_version;
- __u8 class_id;
- kernel_ulong_t driver_data;
-};
-
-/*
- * Struct used for matching a device
- */
-struct of_device_id {
- char name[32];
- char type[32];
- char compatible[128];
- const void *data;
-};
-
-/* VIO */
-struct vio_device_id {
- char type[32];
- char compat[32];
-};
-
-/* PCMCIA */
-
-struct pcmcia_device_id {
- __u16 match_flags;
-
- __u16 manf_id;
- __u16 card_id;
-
- __u8 func_id;
-
- /* for real multi-function devices */
- __u8 function;
-
- /* for pseudo multi-function devices */
- __u8 device_no;
-
- __u32 prod_id_hash[4];
-
- /* not matched against in kernelspace */
- const char * prod_id[4];
-
- /* not matched against */
- kernel_ulong_t driver_info;
- char * cisfile;
-};
-
-#define PCMCIA_DEV_ID_MATCH_MANF_ID 0x0001
-#define PCMCIA_DEV_ID_MATCH_CARD_ID 0x0002
-#define PCMCIA_DEV_ID_MATCH_FUNC_ID 0x0004
-#define PCMCIA_DEV_ID_MATCH_FUNCTION 0x0008
-#define PCMCIA_DEV_ID_MATCH_PROD_ID1 0x0010
-#define PCMCIA_DEV_ID_MATCH_PROD_ID2 0x0020
-#define PCMCIA_DEV_ID_MATCH_PROD_ID3 0x0040
-#define PCMCIA_DEV_ID_MATCH_PROD_ID4 0x0080
-#define PCMCIA_DEV_ID_MATCH_DEVICE_NO 0x0100
-#define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
-#define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400
-
-/* Input */
-#define INPUT_DEVICE_ID_EV_MAX 0x1f
-#define INPUT_DEVICE_ID_KEY_MIN_INTERESTING 0x71
-#define INPUT_DEVICE_ID_KEY_MAX 0x2ff
-#define INPUT_DEVICE_ID_REL_MAX 0x0f
-#define INPUT_DEVICE_ID_ABS_MAX 0x3f
-#define INPUT_DEVICE_ID_MSC_MAX 0x07
-#define INPUT_DEVICE_ID_LED_MAX 0x0f
-#define INPUT_DEVICE_ID_SND_MAX 0x07
-#define INPUT_DEVICE_ID_FF_MAX 0x7f
-#define INPUT_DEVICE_ID_SW_MAX 0x11
-#define INPUT_DEVICE_ID_PROP_MAX 0x1f
-
-#define INPUT_DEVICE_ID_MATCH_BUS 1
-#define INPUT_DEVICE_ID_MATCH_VENDOR 2
-#define INPUT_DEVICE_ID_MATCH_PRODUCT 4
-#define INPUT_DEVICE_ID_MATCH_VERSION 8
-
-#define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010
-#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020
-#define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040
-#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080
-#define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100
-#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200
-#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400
-#define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800
-#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000
-#define INPUT_DEVICE_ID_MATCH_PROPBIT 0x2000
-
-struct input_device_id {
-
- kernel_ulong_t flags;
-
- __u16 bustype;
- __u16 vendor;
- __u16 product;
- __u16 version;
-
- kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
- kernel_ulong_t propbit[INPUT_DEVICE_ID_PROP_MAX / BITS_PER_LONG + 1];
-
- kernel_ulong_t driver_info;
-};
-
-/* EISA */
-
-#define EISA_SIG_LEN 8
-
-/* The EISA signature, in ASCII form, null terminated */
-struct eisa_device_id {
- char sig[EISA_SIG_LEN];
- kernel_ulong_t driver_data;
-};
-
-#define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
-
-struct parisc_device_id {
- __u8 hw_type; /* 5 bits used */
- __u8 hversion_rev; /* 4 bits */
- __u16 hversion; /* 12 bits */
- __u32 sversion; /* 20 bits */
-};
-
-#define PA_HWTYPE_ANY_ID 0xff
-#define PA_HVERSION_REV_ANY_ID 0xff
-#define PA_HVERSION_ANY_ID 0xffff
-#define PA_SVERSION_ANY_ID 0xffffffff
-
-/* SDIO */
-
-#define SDIO_ANY_ID (~0)
-
-struct sdio_device_id {
- __u8 class; /* Standard interface or SDIO_ANY_ID */
- __u16 vendor; /* Vendor or SDIO_ANY_ID */
- __u16 device; /* Device ID or SDIO_ANY_ID */
- kernel_ulong_t driver_data; /* Data private to the driver */
-};
-
-/* SSB core, see drivers/ssb/ */
-struct ssb_device_id {
- __u16 vendor;
- __u16 coreid;
- __u8 revision;
- __u8 __pad;
-} __attribute__((packed, aligned(2)));
-#define SSB_DEVICE(_vendor, _coreid, _revision) \
- { .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
-
-#define SSB_ANY_VENDOR 0xFFFF
-#define SSB_ANY_ID 0xFFFF
-#define SSB_ANY_REV 0xFF
-
-/* Broadcom's specific AMBA core, see drivers/bcma/ */
-struct bcma_device_id {
- __u16 manuf;
- __u16 id;
- __u8 rev;
- __u8 class;
-} __attribute__((packed,aligned(2)));
-#define BCMA_CORE(_manuf, _id, _rev, _class) \
- { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
-
-#define BCMA_ANY_MANUF 0xFFFF
-#define BCMA_ANY_ID 0xFFFF
-#define BCMA_ANY_REV 0xFF
-#define BCMA_ANY_CLASS 0xFF
-
-struct virtio_device_id {
- __u32 device;
- __u32 vendor;
-};
-#define VIRTIO_DEV_ANY_ID 0xffffffff
-
-/*
- * For Hyper-V devices we use the device guid as the id.
- */
-struct hv_vmbus_device_id {
- guid_t guid;
- kernel_ulong_t driver_data; /* Data private to the driver */
-};
-
-/* rpmsg */
-
-#define RPMSG_NAME_SIZE 32
-#define RPMSG_DEVICE_MODALIAS_FMT "rpmsg:%s"
-
-struct rpmsg_device_id {
- char name[RPMSG_NAME_SIZE];
- kernel_ulong_t driver_data;
-};
-
-/* i2c */
-
-#define I2C_NAME_SIZE 20
-#define I2C_MODULE_PREFIX "i2c:"
-
-struct i2c_device_id {
- char name[I2C_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
-};
-
-/* pci_epf */
-
-#define PCI_EPF_NAME_SIZE 20
-#define PCI_EPF_MODULE_PREFIX "pci_epf:"
-
-struct pci_epf_device_id {
- char name[PCI_EPF_NAME_SIZE];
- kernel_ulong_t driver_data;
-};
-
-/* i3c */
-
-#define I3C_MATCH_DCR 0x1
-#define I3C_MATCH_MANUF 0x2
-#define I3C_MATCH_PART 0x4
-#define I3C_MATCH_EXTRA_INFO 0x8
-
-struct i3c_device_id {
- __u8 match_flags;
- __u8 dcr;
- __u16 manuf_id;
- __u16 part_id;
- __u16 extra_info;
-
- const void *data;
-};
-
-/* spi */
-
-#define SPI_NAME_SIZE 32
-#define SPI_MODULE_PREFIX "spi:"
-
-struct spi_device_id {
- char name[SPI_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
-};
-
-/* SLIMbus */
-
-#define SLIMBUS_NAME_SIZE 32
-#define SLIMBUS_MODULE_PREFIX "slim:"
-
-struct slim_device_id {
- __u16 manf_id, prod_code;
- __u16 dev_index, instance;
-
- /* Data private to the driver */
- kernel_ulong_t driver_data;
-};
-
-#define APR_NAME_SIZE 32
-#define APR_MODULE_PREFIX "apr:"
-
-struct apr_device_id {
- char name[APR_NAME_SIZE];
- __u32 domain_id;
- __u32 svc_id;
- __u32 svc_version;
- kernel_ulong_t driver_data; /* Data private to the driver */
-};
-
-#define SPMI_NAME_SIZE 32
-#define SPMI_MODULE_PREFIX "spmi:"
-
-struct spmi_device_id {
- char name[SPMI_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
-};
-
-/* dmi */
-enum dmi_field {
- DMI_NONE,
- DMI_BIOS_VENDOR,
- DMI_BIOS_VERSION,
- DMI_BIOS_DATE,
- DMI_BIOS_RELEASE,
- DMI_EC_FIRMWARE_RELEASE,
- DMI_SYS_VENDOR,
- DMI_PRODUCT_NAME,
- DMI_PRODUCT_VERSION,
- DMI_PRODUCT_SERIAL,
- DMI_PRODUCT_UUID,
- DMI_PRODUCT_SKU,
- DMI_PRODUCT_FAMILY,
- DMI_BOARD_VENDOR,
- DMI_BOARD_NAME,
- DMI_BOARD_VERSION,
- DMI_BOARD_SERIAL,
- DMI_BOARD_ASSET_TAG,
- DMI_CHASSIS_VENDOR,
- DMI_CHASSIS_TYPE,
- DMI_CHASSIS_VERSION,
- DMI_CHASSIS_SERIAL,
- DMI_CHASSIS_ASSET_TAG,
- DMI_STRING_MAX,
- DMI_OEM_STRING, /* special case - will not be in dmi_ident */
-};
-
-struct dmi_strmatch {
- unsigned char slot:7;
- unsigned char exact_match:1;
- char substr[79];
-};
-
-struct dmi_system_id {
- int (*callback)(const struct dmi_system_id *);
- const char *ident;
- struct dmi_strmatch matches[4];
- void *driver_data;
-};
-/*
- * struct dmi_device_id appears during expansion of
- * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
- * but this is enough for gcc 3.4.6 to error out:
- * error: storage size of '__mod_dmi_device_table' isn't known
- */
-#define dmi_device_id dmi_system_id
-
-#define DMI_MATCH(a, b) { .slot = a, .substr = b }
-#define DMI_EXACT_MATCH(a, b) { .slot = a, .substr = b, .exact_match = 1 }
-
-#define PLATFORM_NAME_SIZE 24
-#define PLATFORM_MODULE_PREFIX "platform:"
-
-struct platform_device_id {
- char name[PLATFORM_NAME_SIZE];
- kernel_ulong_t driver_data;
-};
-
-#define MDIO_MODULE_PREFIX "mdio:"
-
-#define MDIO_ID_FMT "%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u"
-#define MDIO_ID_ARGS(_id) \
- ((_id)>>31) & 1, ((_id)>>30) & 1, ((_id)>>29) & 1, ((_id)>>28) & 1, \
- ((_id)>>27) & 1, ((_id)>>26) & 1, ((_id)>>25) & 1, ((_id)>>24) & 1, \
- ((_id)>>23) & 1, ((_id)>>22) & 1, ((_id)>>21) & 1, ((_id)>>20) & 1, \
- ((_id)>>19) & 1, ((_id)>>18) & 1, ((_id)>>17) & 1, ((_id)>>16) & 1, \
- ((_id)>>15) & 1, ((_id)>>14) & 1, ((_id)>>13) & 1, ((_id)>>12) & 1, \
- ((_id)>>11) & 1, ((_id)>>10) & 1, ((_id)>>9) & 1, ((_id)>>8) & 1, \
- ((_id)>>7) & 1, ((_id)>>6) & 1, ((_id)>>5) & 1, ((_id)>>4) & 1, \
- ((_id)>>3) & 1, ((_id)>>2) & 1, ((_id)>>1) & 1, (_id) & 1
-
-/**
- * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus
- * @phy_id: The result of
- * (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&MII_PHYSID2)) & @phy_id_mask
- * for this PHY type
- * @phy_id_mask: Defines the significant bits of @phy_id. A value of 0
- * is used to terminate an array of struct mdio_device_id.
- */
-struct mdio_device_id {
- __u32 phy_id;
- __u32 phy_id_mask;
-};
-
-struct zorro_device_id {
- __u32 id; /* Device ID or ZORRO_WILDCARD */
- kernel_ulong_t driver_data; /* Data private to the driver */
-};
-
-#define ZORRO_WILDCARD (0xffffffff) /* not official */
-
-#define ZORRO_DEVICE_MODALIAS_FMT "zorro:i%08X"
-
-#define ISAPNP_ANY_ID 0xffff
-struct isapnp_device_id {
- unsigned short card_vendor, card_device;
- unsigned short vendor, function;
- kernel_ulong_t driver_data; /* data private to the driver */
-};
-
-/**
- * struct amba_id - identifies a device on an AMBA bus
- * @id: The significant bits if the hardware device ID
- * @mask: Bitmask specifying which bits of the id field are significant when
- * matching. A driver binds to a device when ((hardware device ID) & mask)
- * == id.
- * @data: Private data used by the driver.
- */
-struct amba_id {
- unsigned int id;
- unsigned int mask;
- void *data;
-};
-
-/**
- * struct mips_cdmm_device_id - identifies devices in MIPS CDMM bus
- * @type: Device type identifier.
- */
-struct mips_cdmm_device_id {
- __u8 type;
-};
-
-/*
- * Match x86 CPUs for CPU specific drivers.
- * See documentation of "x86_match_cpu" for details.
- */
-
-/*
- * MODULE_DEVICE_TABLE expects this struct to be called x86cpu_device_id.
- * Although gcc seems to ignore this error, clang fails without this define.
- */
-#define x86cpu_device_id x86_cpu_id
-struct x86_cpu_id {
- __u16 vendor;
- __u16 family;
- __u16 model;
- __u16 steppings;
- __u16 feature; /* bit index */
- /* Solely for kernel-internal use: DO NOT EXPORT to userspace! */
- __u16 flags;
- __u8 platform_mask;
- __u8 type;
- kernel_ulong_t driver_data;
-};
-
-/* Wild cards for x86_cpu_id::vendor, family, model and feature */
-#define X86_VENDOR_ANY 0xffff
-#define X86_FAMILY_ANY 0
-#define X86_MODEL_ANY 0
-#define X86_STEPPING_ANY 0
-#define X86_STEP_MIN 0
-#define X86_STEP_MAX 0xf
-#define X86_PLATFORM_ANY 0x0
-#define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */
-#define X86_CPU_TYPE_ANY 0
+#include "device-id/acpi.h"
+#include "device-id/amba.h"
+#include "device-id/ap.h"
+#include "device-id/apr.h"
+#include "device-id/auxiliary.h"
+#include "device-id/bcma.h"
+#include "device-id/ccw.h"
+#include "device-id/cdx.h"
+#include "device-id/coreboot.h"
+#include "device-id/css.h"
+#include "device-id/dfl.h"
+#include "device-id/dmi.h"
+#include "device-id/eisa.h"
+#include "device-id/fsl_mc.h"
+#include "device-id/hda.h"
+#include "device-id/hid.h"
+#include "device-id/hv_vmbus.h"
+#include "device-id/i2c.h"
+#include "device-id/i3c.h"
+#include "device-id/ieee1394.h"
+#include "device-id/input.h"
+#include "device-id/ipack.h"
+#include "device-id/isapnp.h"
+#include "device-id/ishtp.h"
+#include "device-id/mcb.h"
+#include "device-id/mdio.h"
+#include "device-id/mei_cl.h"
+#include "device-id/mhi.h"
+#include "device-id/mips_cdmm.h"
+#include "device-id/of.h"
+#include "device-id/parisc.h"
+#include "device-id/pci.h"
+#include "device-id/pcmcia.h"
+#include "device-id/platform.h"
+#include "device-id/pnp.h"
+#include "device-id/rio.h"
+#include "device-id/rpmsg.h"
+#include "device-id/sdio.h"
+#include "device-id/sdw.h"
+#include "device-id/serio.h"
+#include "device-id/slim.h"
+#include "device-id/spi.h"
+#include "device-id/spmi.h"
+#include "device-id/ssam.h"
+#include "device-id/ssb.h"
+#include "device-id/tb.h"
+#include "device-id/tee_client.h"
+#include "device-id/typec.h"
+#include "device-id/ulpi.h"
+#include "device-id/usb.h"
+#include "device-id/vchiq.h"
+#include "device-id/vio.h"
+#include "device-id/virtio.h"
+#include "device-id/wmi.h"
+#include "device-id/x86_cpu.h"
+#include "device-id/zorro.h"
/*
* Generic table type for matching CPU features.
__u16 feature;
};
-#define IPACK_ANY_FORMAT 0xff
-#define IPACK_ANY_ID (~0)
-struct ipack_device_id {
- __u8 format; /* Format version or IPACK_ANY_ID */
- __u32 vendor; /* Vendor ID or IPACK_ANY_ID */
- __u32 device; /* Device ID or IPACK_ANY_ID */
-};
-
-#define MEI_CL_MODULE_PREFIX "mei:"
-#define MEI_CL_NAME_SIZE 32
-#define MEI_CL_VERSION_ANY 0xff
-
-/**
- * struct mei_cl_device_id - MEI client device identifier
- * @name: helper name
- * @uuid: client uuid
- * @version: client protocol version
- * @driver_info: information used by the driver.
- *
- * identifies mei client device by uuid and name
- */
-struct mei_cl_device_id {
- char name[MEI_CL_NAME_SIZE];
- uuid_le uuid;
- __u8 version;
- kernel_ulong_t driver_info;
-};
-
-/* RapidIO */
-
-#define RIO_ANY_ID 0xffff
-
-/**
- * struct rio_device_id - RIO device identifier
- * @did: RapidIO device ID
- * @vid: RapidIO vendor ID
- * @asm_did: RapidIO assembly device ID
- * @asm_vid: RapidIO assembly vendor ID
- *
- * Identifies a RapidIO device based on both the device/vendor IDs and
- * the assembly device/vendor IDs.
- */
-struct rio_device_id {
- __u16 did, vid;
- __u16 asm_did, asm_vid;
-};
-
-struct mcb_device_id {
- __u16 device;
- kernel_ulong_t driver_data;
-};
-
-struct ulpi_device_id {
- __u16 vendor;
- __u16 product;
- kernel_ulong_t driver_data;
-};
-
-/**
- * struct fsl_mc_device_id - MC object device identifier
- * @vendor: vendor ID
- * @obj_type: MC object type
- *
- * Type of entries in the "device Id" table for MC object devices supported by
- * a MC object device driver. The last entry of the table has vendor set to 0x0
- */
-struct fsl_mc_device_id {
- __u16 vendor;
- const char obj_type[16];
-};
-
-/**
- * struct tb_service_id - Thunderbolt service identifiers
- * @match_flags: Flags used to match the structure
- * @protocol_key: Protocol key the service supports
- * @protocol_id: Protocol id the service supports
- * @protocol_version: Version of the protocol
- * @protocol_revision: Revision of the protocol software
- * @driver_data: Driver specific data
- *
- * Thunderbolt XDomain services are exposed as devices where each device
- * carries the protocol information the service supports. Thunderbolt
- * XDomain service drivers match against that information.
- */
-struct tb_service_id {
- __u32 match_flags;
- char protocol_key[8 + 1];
- __u32 protocol_id;
- __u32 protocol_version;
- __u32 protocol_revision;
- kernel_ulong_t driver_data;
-};
-
-#define TBSVC_MATCH_PROTOCOL_KEY 0x0001
-#define TBSVC_MATCH_PROTOCOL_ID 0x0002
-#define TBSVC_MATCH_PROTOCOL_VERSION 0x0004
-#define TBSVC_MATCH_PROTOCOL_REVISION 0x0008
-
-/* USB Type-C Alternate Modes */
-
-#define TYPEC_ANY_MODE 0x7
-
-/**
- * struct typec_device_id - USB Type-C alternate mode identifiers
- * @svid: Standard or Vendor ID
- * @mode: Mode index
- * @driver_data: Driver specific data
- */
-struct typec_device_id {
- __u16 svid;
- __u8 mode;
- kernel_ulong_t driver_data;
-};
-
-/**
- * struct tee_client_device_id - tee based device identifier
- * @uuid: For TEE based client devices we use the device uuid as
- * the identifier.
- */
-struct tee_client_device_id {
- uuid_t uuid;
-};
-
-/* WMI */
-
-#define WMI_MODULE_PREFIX "wmi:"
-
-/**
- * struct wmi_device_id - WMI device identifier
- * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
- * @context: pointer to driver specific data
- */
-struct wmi_device_id {
- const char guid_string[UUID_STRING_LEN+1];
- const void *context;
-};
-
-#define MHI_DEVICE_MODALIAS_FMT "mhi:%s"
-#define MHI_NAME_SIZE 32
-
-#define MHI_EP_DEVICE_MODALIAS_FMT "mhi_ep:%s"
-
-/**
- * struct mhi_device_id - MHI device identification
- * @chan: MHI channel name
- * @driver_data: driver data;
- */
-struct mhi_device_id {
- const char chan[MHI_NAME_SIZE];
- kernel_ulong_t driver_data;
-};
-
-#define AUXILIARY_NAME_SIZE 40
-#define AUXILIARY_MODULE_PREFIX "auxiliary:"
-
-struct auxiliary_device_id {
- char name[AUXILIARY_NAME_SIZE];
- kernel_ulong_t driver_data;
-};
-
-/* Surface System Aggregator Module */
-
-#define SSAM_MATCH_TARGET 0x1
-#define SSAM_MATCH_INSTANCE 0x2
-#define SSAM_MATCH_FUNCTION 0x4
-
-struct ssam_device_id {
- __u8 match_flags;
-
- __u8 domain;
- __u8 category;
- __u8 target;
- __u8 instance;
- __u8 function;
-
- kernel_ulong_t driver_data;
-};
-
-/*
- * DFL (Device Feature List)
- *
- * DFL defines a linked list of feature headers within the device MMIO space to
- * provide an extensible way of adding features. Software can walk through these
- * predefined data structures to enumerate features. It is now used in the FPGA.
- * See Documentation/fpga/dfl.rst for more information.
- *
- * The dfl bus type is introduced to match the individual feature devices (dfl
- * devices) for specific dfl drivers.
- */
-
-/**
- * struct dfl_device_id - dfl device identifier
- * @type: DFL FIU type of the device. See enum dfl_id_type.
- * @feature_id: feature identifier local to its DFL FIU type.
- * @driver_data: driver specific data.
- */
-struct dfl_device_id {
- __u16 type;
- __u16 feature_id;
- kernel_ulong_t driver_data;
-};
-
-/* ISHTP (Integrated Sensor Hub Transport Protocol) */
-
-#define ISHTP_MODULE_PREFIX "ishtp:"
-
-/**
- * struct ishtp_device_id - ISHTP device identifier
- * @guid: GUID of the device.
- * @driver_data: pointer to driver specific data
- */
-struct ishtp_device_id {
- guid_t guid;
- kernel_ulong_t driver_data;
-};
-
-#define CDX_ANY_ID (0xFFFF)
-
-enum {
- CDX_ID_F_VFIO_DRIVER_OVERRIDE = 1,
-};
-
-/**
- * struct cdx_device_id - CDX device identifier
- * @vendor: Vendor ID
- * @device: Device ID
- * @subvendor: Subsystem vendor ID (or CDX_ANY_ID)
- * @subdevice: Subsystem device ID (or CDX_ANY_ID)
- * @class: Device class
- * Most drivers do not need to specify class/class_mask
- * as vendor/device is normally sufficient.
- * @class_mask: Limit which sub-fields of the class field are compared.
- * @override_only: Match only when dev->driver_override is this driver.
- *
- * Type of entries in the "device Id" table for CDX devices supported by
- * a CDX device driver.
- */
-struct cdx_device_id {
- __u16 vendor;
- __u16 device;
- __u16 subvendor;
- __u16 subdevice;
- __u32 class;
- __u32 class_mask;
- __u32 override_only;
-};
-
-struct vchiq_device_id {
- char name[32];
-};
-
-/**
- * struct coreboot_device_id - Identifies a coreboot table entry
- * @tag: tag ID
- * @driver_data: driver specific data
- */
-struct coreboot_device_id {
- __u32 tag;
- kernel_ulong_t driver_data;
-};
-
#endif /* LINUX_MOD_DEVICETABLE_H */
projects / thirdparty / kernel / linux.git / commitdiff
