]> git.ipfire.org Git - thirdparty/kernel/stable-queue.git/commitdiff
4.4-stable patches
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 15 Nov 2021 12:59:16 +0000 (13:59 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 15 Nov 2021 12:59:16 +0000 (13:59 +0100)
added patches:
arm-9156-1-drop-cc-option-fallbacks-for-architecture-selection.patch

queue-4.4/arm-9156-1-drop-cc-option-fallbacks-for-architecture-selection.patch [new file with mode: 0644]
queue-4.4/series

diff --git a/queue-4.4/arm-9156-1-drop-cc-option-fallbacks-for-architecture-selection.patch b/queue-4.4/arm-9156-1-drop-cc-option-fallbacks-for-architecture-selection.patch
new file mode 100644 (file)
index 0000000..18c78e8
--- /dev/null
@@ -0,0 +1,103 @@
+From 418ace9992a7647c446ed3186df40cf165b67298 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Sat, 6 Nov 2021 19:42:29 +0100
+Subject: ARM: 9156/1: drop cc-option fallbacks for architecture selection
+
+From: Arnd Bergmann <arnd@arndb.de>
+
+commit 418ace9992a7647c446ed3186df40cf165b67298 upstream.
+
+Naresh and Antonio ran into a build failure with latest Debian
+armhf compilers, with lots of output like
+
+ tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
+
+As it turns out, $(cc-option) fails early here when the FPU is not
+selected before CPU architecture is selected, as the compiler
+option check runs before enabling -msoft-float, which causes
+a problem when testing a target architecture level without an FPU:
+
+cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
+
+Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
+issue, but the fallback logic is already broken because all supported
+compilers (gcc-5 and higher) are much more recent than these options,
+and building with -march=armv5t as a fallback no longer works.
+
+The best way forward that I see is to just remove all the checks, which
+also has the nice side-effect of slightly improving the startup time for
+'make'.
+
+The -mtune=marvell-f option was apparently never supported by any mainline
+compiler, and the custom Codesourcery gcc build that did support is
+now too old to build kernels, so just use -mtune=xscale unconditionally
+for those.
+
+This should be safe to apply on all stable kernels, and will be required
+in order to keep building them with gcc-11 and higher.
+
+Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419
+
+Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org>
+Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
+Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
+Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
+Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
+Cc: Matthias Klose <doko@debian.org>
+Cc: stable@vger.kernel.org
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/arm/Makefile |   22 +++++++++++-----------
+ 1 file changed, 11 insertions(+), 11 deletions(-)
+
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -66,15 +66,15 @@ KBUILD_CFLAGS      += $(call cc-option,-fno-i
+ # Note that GCC does not numerically define an architecture version
+ # macro, but instead defines a whole series of macros which makes
+ # testing for a specific architecture or later rather impossible.
+-arch-$(CONFIG_CPU_32v7M)      =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
+-arch-$(CONFIG_CPU_32v7)               =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
+-arch-$(CONFIG_CPU_32v6)               =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
++arch-$(CONFIG_CPU_32v7M)      =-D__LINUX_ARM_ARCH__=7 -march=armv7-m
++arch-$(CONFIG_CPU_32v7)               =-D__LINUX_ARM_ARCH__=7 -march=armv7-a
++arch-$(CONFIG_CPU_32v6)               =-D__LINUX_ARM_ARCH__=6 -march=armv6
+ # Only override the compiler option if ARMv6. The ARMv6K extensions are
+ # always available in ARMv7
+ ifeq ($(CONFIG_CPU_32v6),y)
+-arch-$(CONFIG_CPU_32v6K)      =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
++arch-$(CONFIG_CPU_32v6K)      =-D__LINUX_ARM_ARCH__=6 -march=armv6k
+ endif
+-arch-$(CONFIG_CPU_32v5)               =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
++arch-$(CONFIG_CPU_32v5)               =-D__LINUX_ARM_ARCH__=5 -march=armv5te
+ arch-$(CONFIG_CPU_32v4T)      =-D__LINUX_ARM_ARCH__=4 -march=armv4t
+ arch-$(CONFIG_CPU_32v4)               =-D__LINUX_ARM_ARCH__=4 -march=armv4
+ arch-$(CONFIG_CPU_32v3)               =-D__LINUX_ARM_ARCH__=3 -march=armv3
+@@ -88,7 +88,7 @@ tune-$(CONFIG_CPU_ARM720T)   =-mtune=arm7t
+ tune-$(CONFIG_CPU_ARM740T)    =-mtune=arm7tdmi
+ tune-$(CONFIG_CPU_ARM9TDMI)   =-mtune=arm9tdmi
+ tune-$(CONFIG_CPU_ARM940T)    =-mtune=arm9tdmi
+-tune-$(CONFIG_CPU_ARM946E)    =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
++tune-$(CONFIG_CPU_ARM946E)    =-mtune=arm9e
+ tune-$(CONFIG_CPU_ARM920T)    =-mtune=arm9tdmi
+ tune-$(CONFIG_CPU_ARM922T)    =-mtune=arm9tdmi
+ tune-$(CONFIG_CPU_ARM925T)    =-mtune=arm9tdmi
+@@ -96,11 +96,11 @@ tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9t
+ tune-$(CONFIG_CPU_FA526)      =-mtune=arm9tdmi
+ tune-$(CONFIG_CPU_SA110)      =-mtune=strongarm110
+ tune-$(CONFIG_CPU_SA1100)     =-mtune=strongarm1100
+-tune-$(CONFIG_CPU_XSCALE)     =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+-tune-$(CONFIG_CPU_XSC3)               =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+-tune-$(CONFIG_CPU_FEROCEON)   =$(call cc-option,-mtune=marvell-f,-mtune=xscale)
+-tune-$(CONFIG_CPU_V6)         =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+-tune-$(CONFIG_CPU_V6K)                =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
++tune-$(CONFIG_CPU_XSCALE)     =-mtune=xscale
++tune-$(CONFIG_CPU_XSC3)               =-mtune=xscale
++tune-$(CONFIG_CPU_FEROCEON)   =-mtune=xscale
++tune-$(CONFIG_CPU_V6)         =-mtune=arm1136j-s
++tune-$(CONFIG_CPU_V6K)                =-mtune=arm1136j-s
+ # Evaluate tune cc-option calls now
+ tune-y := $(tune-y)
index 81cb972e2bb483df6ba44cacf3ad7f216143b8a1..64d1b452a8cf50e6b47923eb7082a8de795af5da 100644 (file)
@@ -108,3 +108,4 @@ nfc-pn533-fix-double-free-when-pn533_fill_fragment_s.patch
 vsock-prevent-unnecessary-refcnt-inc-for-nonblocking.patch
 fuse-fix-page-stealing.patch
 usb-chipidea-fix-interrupt-deadlock.patch
+arm-9156-1-drop-cc-option-fallbacks-for-architecture-selection.patch