Merge patch series "lmb: use a single API for all allocations"

Sughosh Ganu <sughosh.ganu@linaro.org> says:

The LMB module has a bunch for API's which are used for allocating
memory. There are a couple of API's for requesting memory, and two
more for reserving regions of memory. Replace these different API's
with a single one, lmb_alloc_mem(). The type of allocation to be made
is specified through one of the parameters to the function.

Additionally, the two API's for reserving regions of memory,
lmb_reserve() and lmb_alloc_addr() are the same with one
difference. One can reserve any memory region with lmb_reserve(),
while lmb_alloc_addr() actually checks that the memory region being
requested is part of the LMB memory map. Reserving memory that is not
part of the LMB memory map is pretty futile -- the allocation
functions do not allocate memory which has not been added to the LMB
memory map.

This series also removes the functionality allowing for reserving
memory regions outside the LMB memory map. Any request for reserving a
region of memory outside the LMB memory map now returns an -EINVAL
error.

Certain places in the common code using the LMB API's were not
checking the return value of the functions. Checks have been added for
them. There are some calls being made from the architecture/platform
specific code which too do not check the return value. Those have been
kept the same, as I do not have the platform with me to check if it
causes any issues on those platforms.

In addition, there is a patch which refactors code in
lmb_overlaps_region() and lmb_can_reserve_region() so that both
functionalities can be put in a single function, lmb_overlap_checks().

Finally, a new patch has been added which checks the return value of
the lmb allocation function before copying the device-tree to the
allocated address.

Link: https://lore.kernel.org/r/20250617104346.1379981-1-sughosh.ganu@linaro.org
[trini: Rework arch/arm/mach-snapdragon/board.c merge]
Signed-off-by: Tom Rini <trini@konsulko.com>

diff --cc arch/arm/mach-snapdragon/board.c
index 8f7fc19cadc93f6be253aa0ccec7b0098d707bcb,ed2bd5dbadefc5c84635a78410411cbe5ba1eb52..ec51ebbbe7f514b98ffa89702a4ca142017926b0
--- 1/arch/arm/mach-snapdragon/board.c
--- 2/arch/arm/mach-snapdragon/board.c
+++ b/arch/arm/mach-snapdragon/board.c
@@@ -527,24 -502,28 +527,32 @@@ int board_late_init(void
        struct fdt_header *fdt_blob = (struct fdt_header *)gd->fdt_blob;
  
        /* We need to be fairly conservative here as we support boards with just 1G of TOTAL RAM */
-       addr = addr_alloc(SZ_128M);
+       status |= !lmb_alloc(SZ_128M, &addr) ?
+               env_set_hex("loadaddr", addr) : 1;
        status |= env_set_hex("kernel_addr_r", addr);
-       status |= env_set_hex("loadaddr", addr);
-       status |= env_set_hex("ramdisk_addr_r", addr_alloc(SZ_128M));
-       status |= env_set_hex("kernel_comp_addr_r", addr_alloc(KERNEL_COMP_SIZE));
-       status |= env_set_hex("kernel_comp_size", KERNEL_COMP_SIZE);
+       status |= !lmb_alloc(SZ_128M, &addr) ?
+               env_set_hex("ramdisk_addr_r", addr) : 1;
+       status |= !lmb_alloc(KERNEL_COMP_SIZE, &addr) ?
+               env_set_hex("kernel_comp_addr_r", addr) : 1;
+       status |= !lmb_alloc(KERNEL_COMP_SIZE, &addr) ?
+               env_set_hex("kernel_comp_size", addr) : 1;
+       status |= !lmb_alloc(SZ_4M, &addr) ?
+               env_set_hex("scriptaddr", addr) : 1;
+       status |= !lmb_alloc(SZ_4M, &addr) ?
+               env_set_hex("pxefile_addr_r", addr) : 1;
+ 
 -      if (IS_ENABLED(CONFIG_FASTBOOT))
 +      if (IS_ENABLED(CONFIG_FASTBOOT)) {
-               addr = addr_alloc(FASTBOOT_BUF_SIZE);
-               status |= env_set_hex("fastboot_addr_r", addr);
+               status |= !lmb_alloc(FASTBOOT_BUF_SIZE, &addr) ?
+                       env_set_hex("fastboot_addr_r", addr) : 1;
 +              /* override loadaddr for memory rich soc */
-               status |= env_set_hex("loadaddr", addr);
++              status |= !lmb_alloc(SZ_128M, &addr) ?
++                      env_set_hex("loadaddr", addr) : 1;
 +      }
-       status |= env_set_hex("scriptaddr", addr_alloc(SZ_4M));
-       status |= env_set_hex("pxefile_addr_r", addr_alloc(SZ_4M));
-       addr = addr_alloc(SZ_2M);
-       status |= env_set_hex("fdt_addr_r", addr);
  
-       if (status)
+       fdt_status |= !lmb_alloc(SZ_2M, &addr) ?
+               env_set_hex("fdt_addr_r", addr) : 1;
+ 
+       if (status || fdt_status)
                log_warning("%s: Failed to set run time variables\n", __func__);
  
        /* By default copy U-Boots FDT, it will be used as a fallback */