-lws2_32.
* ser-tcp.c (<winsock2.h>): Include, for Windows.
(ETIMEDOUT): Define, for Windows.
(ioctl): Likewise.
(closesocket): Define, for POSIX.
(net_open): Adjust for differences in socket functions between
Windows and UNIX.
(net_close): Likweise.
(net_read_prim): New function.
(net_write_prim): Likewise.
(_initialize_ser_tcp): Initialize winsock. Fill in read_prim and
write_prim.
* ser-unix.h (ser_unix_readcchar): Remove.
(ser_unix_read_prim): Declare.
(ser_unix_write_prim): Likewise.
* ser-unix.c (generic_readchar): Move to ser-base.c.
(ser_unix_wait_for): Likewise.
(do_unix_readchar): Likewise.
(ser_unix_readchar): Likewise.
(_initialize_ser_hardwire): Initialize read_prim and write_prim.
(ser_unix_read_prim): New function.
(ser_unix_write_prim): Likewise.
* ser-base.h (generic_readchar): Declare.
(ser_base_readchar): Likewise.
* ser-base.c (<winsock2.h>): Include, for windows.
(fd_event): Use the read primitive specified by the serial
interface.
(ser_base_wait_for): Moved from ser-unix.c
(do_ser_base_read_char): Likewise.
(generic_readchar): Likewise.
(ser_base_readchar): Likewise.
(ser_base_write): Use the write primitive specified by the serial
interface.
* ser-pipe.c (_initialize_ser_pipe): Use ser_base_readchar, not
ser_unix_readchar. Initialize read_prim and write_prim.
* serial.c (struct serial_ops): Add read_prim and write_prim.
* configure: Regenerate.
+2005-04-20 Mark Mitchell <mark@codesourcery.com>
+
+ * configure.ac: On MinGW, define USE_WIN32API and link with
+ -lws2_32.
+ * ser-tcp.c (<winsock2.h>): Include, for Windows.
+ (ETIMEDOUT): Define, for Windows.
+ (ioctl): Likewise.
+ (closesocket): Define, for POSIX.
+ (net_open): Adjust for differences in socket functions between
+ Windows and UNIX.
+ (net_close): Likweise.
+ (net_read_prim): New function.
+ (net_write_prim): Likewise.
+ (_initialize_ser_tcp): Initialize winsock. Fill in read_prim and
+ write_prim.
+ * ser-unix.h (ser_unix_readcchar): Remove.
+ (ser_unix_read_prim): Declare.
+ (ser_unix_write_prim): Likewise.
+ * ser-unix.c (generic_readchar): Move to ser-base.c.
+ (ser_unix_wait_for): Likewise.
+ (do_unix_readchar): Likewise.
+ (ser_unix_readchar): Likewise.
+ (_initialize_ser_hardwire): Initialize read_prim and write_prim.
+ (ser_unix_read_prim): New function.
+ (ser_unix_write_prim): Likewise.
+ * ser-base.h (generic_readchar): Declare.
+ (ser_base_readchar): Likewise.
+ * ser-base.c (<winsock2.h>): Include, for windows.
+ (fd_event): Use the read primitive specified by the serial
+ interface.
+ (ser_base_wait_for): Moved from ser-unix.c
+ (do_ser_base_read_char): Likewise.
+ (generic_readchar): Likewise.
+ (ser_base_readchar): Likewise.
+ (ser_base_write): Use the write primitive specified by the serial
+ interface.
+ * ser-pipe.c (_initialize_ser_pipe): Use ser_base_readchar, not
+ ser_unix_readchar. Initialize read_prim and write_prim.
+ * serial.c (struct serial_ops): Add read_prim and write_prim.
+ * configure: Regenerate.
+
2005-04-19 Ben Elliston <bje@au.ibm.com>
* c-lang.c (c_create_fundamental_type): Comment fix.
esac
fi
+# The ser-tcp.c module requires sockets.
+case ${host} in
+ *mingw32*)
+
+cat >>confdefs.h <<\_ACEOF
+#define USE_WIN32API 1
+_ACEOF
+
+ WIN32LIBS="$WIN32LIBS -lws2_32"
+ ;;
+esac
+
LIBGUI="../libgui/src/libgui.a"
GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
;;
esac
fi
+
+# The ser-tcp.c module requires sockets.
+case ${host} in
+ *mingw32*)
+ AC_DEFINE(USE_WIN32API, 1,
+ [Define if we should use the Windows API, instead of the
+ POSIX API. On Windows, we use the Windows API when
+ building for MinGW, but the POSIX API when building
+ for Cygwin.])
+ WIN32LIBS="$WIN32LIBS -lws2_32"
+ ;;
+esac
AC_SUBST(WIN32LIBS)
LIBGUI="../libgui/src/libgui.a"
#include "serial.h"
#include "ser-unix.h"
#include "event-loop.h"
+#ifdef USE_WIN32API
+#include <winsock2.h>
+#endif
static timer_handler_func push_event;
static handler_func fd_event;
pull characters out of the buffer. See also
generic_readchar(). */
int nr;
- do
- {
- nr = read (scb->fd, scb->buf, BUFSIZ);
- }
- while (nr == -1 && errno == EINTR);
+ nr = scb->ops->read_prim (scb, BUFSIZ);
if (nr == 0)
{
scb->bufcnt = SERIAL_EOF;
reschedule (scb);
}
+/* Wait for input on scb, with timeout seconds. Returns 0 on success,
+ otherwise SERIAL_TIMEOUT or SERIAL_ERROR. */
+
+static int
+ser_base_wait_for (struct serial *scb, int timeout)
+{
+ while (1)
+ {
+ int numfds;
+ struct timeval tv;
+ fd_set readfds, exceptfds;
+
+ /* NOTE: Some OS's can scramble the READFDS when the select()
+ call fails (ex the kernel with Red Hat 5.2). Initialize all
+ arguments before each call. */
+
+ tv.tv_sec = timeout;
+ tv.tv_usec = 0;
+
+ FD_ZERO (&readfds);
+ FD_ZERO (&exceptfds);
+ FD_SET (scb->fd, &readfds);
+ FD_SET (scb->fd, &exceptfds);
+
+ if (timeout >= 0)
+ numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, &tv);
+ else
+ numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, 0);
+
+ if (numfds <= 0)
+ {
+ if (numfds == 0)
+ return SERIAL_TIMEOUT;
+ else if (errno == EINTR)
+ continue;
+ else
+ return SERIAL_ERROR; /* Got an error from select or poll */
+ }
+
+ return 0;
+ }
+}
+
+/* Read a character with user-specified timeout. TIMEOUT is number of seconds
+ to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
+ char if successful. Returns -2 if timeout expired, EOF if line dropped
+ dead, or -3 for any other error (see errno in that case). */
+
+static int
+do_ser_base_readchar (struct serial *scb, int timeout)
+{
+ int status;
+ int delta;
+
+ /* We have to be able to keep the GUI alive here, so we break the
+ original timeout into steps of 1 second, running the "keep the
+ GUI alive" hook each time through the loop.
+
+ Also, timeout = 0 means to poll, so we just set the delta to 0,
+ so we will only go through the loop once. */
+
+ delta = (timeout == 0 ? 0 : 1);
+ while (1)
+ {
+ /* N.B. The UI may destroy our world (for instance by calling
+ remote_stop,) in which case we want to get out of here as
+ quickly as possible. It is not safe to touch scb, since
+ someone else might have freed it. The
+ deprecated_ui_loop_hook signals that we should exit by
+ returning 1. */
+
+ if (deprecated_ui_loop_hook)
+ {
+ if (deprecated_ui_loop_hook (0))
+ return SERIAL_TIMEOUT;
+ }
+
+ status = ser_base_wait_for (scb, delta);
+ if (timeout > 0)
+ timeout -= delta;
+
+ /* If we got a character or an error back from wait_for, then we can
+ break from the loop before the timeout is completed. */
+ if (status != SERIAL_TIMEOUT)
+ break;
+
+ /* If we have exhausted the original timeout, then generate
+ a SERIAL_TIMEOUT, and pass it out of the loop. */
+ else if (timeout == 0)
+ {
+ status = SERIAL_TIMEOUT;
+ break;
+ }
+ }
+
+ if (status < 0)
+ return status;
+
+ status = scb->ops->read_prim (scb, BUFSIZ);
+
+ if (status <= 0)
+ {
+ if (status == 0)
+ /* 0 chars means timeout. (We may need to distinguish between EOF
+ & timeouts someday.) */
+ return SERIAL_TIMEOUT;
+ else
+ /* Got an error from read. */
+ return SERIAL_ERROR;
+ }
+
+ scb->bufcnt = status;
+ scb->bufcnt--;
+ scb->bufp = scb->buf;
+ return *scb->bufp++;
+}
+
+/* Perform operations common to both old and new readchar. */
+
+/* Return the next character from the input FIFO. If the FIFO is
+ empty, call the SERIAL specific routine to try and read in more
+ characters.
+
+ Initially data from the input FIFO is returned (fd_event()
+ pre-reads the input into that FIFO. Once that has been emptied,
+ further data is obtained by polling the input FD using the device
+ specific readchar() function. Note: reschedule() is called after
+ every read. This is because there is no guarentee that the lower
+ level fd_event() poll_event() code (which also calls reschedule())
+ will be called. */
+
+int
+generic_readchar (struct serial *scb, int timeout,
+ int (do_readchar) (struct serial *scb, int timeout))
+{
+ int ch;
+ if (scb->bufcnt > 0)
+ {
+ ch = *scb->bufp;
+ scb->bufcnt--;
+ scb->bufp++;
+ }
+ else if (scb->bufcnt < 0)
+ {
+ /* Some errors/eof are are sticky. */
+ ch = scb->bufcnt;
+ }
+ else
+ {
+ ch = do_readchar (scb, timeout);
+ if (ch < 0)
+ {
+ switch ((enum serial_rc) ch)
+ {
+ case SERIAL_EOF:
+ case SERIAL_ERROR:
+ /* Make the error/eof stick. */
+ scb->bufcnt = ch;
+ break;
+ case SERIAL_TIMEOUT:
+ scb->bufcnt = 0;
+ break;
+ }
+ }
+ }
+ reschedule (scb);
+ return ch;
+}
+
+int
+ser_base_readchar (struct serial *scb, int timeout)
+{
+ return generic_readchar (scb, timeout, do_ser_base_readchar);
+}
+
int
ser_base_write (struct serial *scb, const char *str, int len)
{
while (len > 0)
{
- cc = write (scb->fd, str, len);
+ cc = scb->ops->write_prim (scb, str, len);
if (cc < 0)
return 1;
struct serial;
struct ui_file;
+extern int generic_readchar (struct serial *scb, int timeout,
+ int (*do_readchar) (struct serial *scb,
+ int timeout));
extern void reschedule (struct serial *scb);
extern int ser_base_flush_output (struct serial *scb);
extern int ser_base_flush_input (struct serial *scb);
extern int ser_base_write (struct serial *scb, const char *str, int len);
extern void ser_base_async (struct serial *scb, int async_p);
+extern int ser_base_readchar (struct serial *scb, int timeout);
#endif
ops->next = 0;
ops->open = pipe_open;
ops->close = pipe_close;
- ops->readchar = ser_unix_readchar;
+ ops->readchar = ser_base_readchar;
ops->write = ser_base_write;
ops->flush_output = ser_base_flush_output;
ops->flush_input = ser_base_flush_input;
ops->setstopbits = ser_base_setstopbits;
ops->drain_output = ser_base_drain_output;
ops->async = ser_base_async;
+ ops->read_prim = ser_unix_read_prim;
+ ops->write_prim = ser_unix_write_prim;
serial_add_interface (ops);
}
#endif
#include <sys/time.h>
+
+#ifdef USE_WIN32API
+#include <winsock2.h>
+#define ETIMEDOUT WSAETIMEDOUT
+#define close closesocket
+#define ioctl ioctlsocket
+#else
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <sys/socket.h>
#include <netinet/tcp.h>
+#endif
#include <signal.h>
#include "gdb_string.h"
int use_udp;
struct hostent *hostent;
struct sockaddr_in sockaddr;
+#ifdef USE_WIN32API
+ u_long ioarg;
+#else
+ int ioarg;
+#endif
use_udp = 0;
if (strncmp (name, "udp:", 4) == 0)
sizeof (struct in_addr));
/* set socket nonblocking */
- tmp = 1;
- ioctl (scb->fd, FIONBIO, &tmp);
+ ioarg = 1;
+ ioctl (scb->fd, FIONBIO, &ioarg);
/* Use Non-blocking connect. connect() will return 0 if connected already. */
n = connect (scb->fd, (struct sockaddr *) &sockaddr, sizeof (sockaddr));
- if (n < 0 && errno != EINPROGRESS)
+ if (n < 0
+#ifdef USE_WIN32API
+ /* Under Windows, calling "connect" with a non-blocking socket
+ results in WSAEWOULDBLOCK, not WSAEINPROGRESS. */
+ && WSAGetLastError() != WSAEWOULDBLOCK
+#else
+ && errno != EINPROGRESS
+#endif
+ )
{
+#ifdef USE_WIN32API
+ errno = WSAGetLastError();
+#endif
net_close (scb);
return -1;
}
{
int res, err, len;
len = sizeof(err);
- res = getsockopt (scb->fd, SOL_SOCKET, SO_ERROR, &err, &len);
+ /* On Windows, the fourth parameter to getsockopt is a "char *";
+ on UNIX systems it is generally "void *". The cast to "void *"
+ is OK everywhere, since in C "void *" can be implicitly
+ converted to any pointer type. */
+ res = getsockopt (scb->fd, SOL_SOCKET, SO_ERROR, (void *) &err, &len);
if (res < 0 || err)
{
if (err)
}
/* turn off nonblocking */
- tmp = 0;
- ioctl (scb->fd, FIONBIO, &tmp);
+ ioarg = 0;
+ ioctl (scb->fd, FIONBIO, &ioarg);
if (use_udp == 0)
{
scb->fd = -1;
}
+static int
+net_read_prim (struct serial *scb, size_t count)
+{
+ return recv (scb->fd, scb->buf, count, 0);
+}
+
+static int
+net_write_prim (struct serial *scb, const void *buf, size_t count)
+{
+ return send (scb->fd, buf, count, 0);
+}
+
void
_initialize_ser_tcp (void)
{
- struct serial_ops *ops = XMALLOC (struct serial_ops);
+ struct serial_ops *ops;
+#ifdef USE_WIN32API
+ WSADATA wsa_data;
+ if (WSAStartup (MAKEWORD (1, 0), &wsa_data) != 0)
+ /* WinSock is unavailable. */
+ return;
+#endif
+ ops = XMALLOC (struct serial_ops);
memset (ops, 0, sizeof (struct serial_ops));
ops->name = "tcp";
ops->next = 0;
ops->open = net_open;
ops->close = net_close;
- ops->readchar = ser_unix_readchar;
+ ops->readchar = ser_base_readchar;
ops->write = ser_base_write;
ops->flush_output = ser_base_flush_output;
ops->flush_input = ser_base_flush_input;
ops->setstopbits = ser_base_setstopbits;
ops->drain_output = ser_base_drain_output;
ops->async = ser_base_async;
+ ops->read_prim = net_read_prim;
+ ops->write_prim = net_write_prim;
serial_add_interface (ops);
}
static int wait_for (struct serial *scb, int timeout);
static int hardwire_readchar (struct serial *scb, int timeout);
static int do_hardwire_readchar (struct serial *scb, int timeout);
-static int generic_readchar (struct serial *scb, int timeout,
- int (*do_readchar) (struct serial *scb,
- int timeout));
static int rate_to_code (int rate);
static int hardwire_setbaudrate (struct serial *scb, int rate);
static void hardwire_close (struct serial *scb);
*/
/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ ser_base*() until the old TERMIOS/SGTTY/... timer code has been
flushed. . */
/* NOTE: cagney/1999-09-30: Much of the code below is dead. The only
dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ ser_base*() until the old TERMIOS/SGTTY/... timer code has been
flushed. */
/* NOTE: cagney/1999-09-16: This function is not identical to
- ser_unix_readchar() as part of replacing it with ser_unix*()
+ ser_base_readchar() as part of replacing it with ser_base*()
merging will be required - this code handles the case where read()
- times out due to no data while ser_unix_readchar() doesn't expect
+ times out due to no data while ser_base_readchar() doesn't expect
that. */
static int
close (scb->fd);
scb->fd = -1;
}
-
\f
-/* Wait for input on scb, with timeout seconds. Returns 0 on success,
- otherwise SERIAL_TIMEOUT or SERIAL_ERROR. */
-
-static int
-ser_unix_wait_for (struct serial *scb, int timeout)
-{
- while (1)
- {
- int numfds;
- struct timeval tv;
- fd_set readfds, exceptfds;
-
- /* NOTE: Some OS's can scramble the READFDS when the select()
- call fails (ex the kernel with Red Hat 5.2). Initialize all
- arguments before each call. */
-
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
-
- FD_ZERO (&readfds);
- FD_ZERO (&exceptfds);
- FD_SET (scb->fd, &readfds);
- FD_SET (scb->fd, &exceptfds);
-
- if (timeout >= 0)
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, &tv);
- else
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, 0);
-
- if (numfds <= 0)
- {
- if (numfds == 0)
- return SERIAL_TIMEOUT;
- else if (errno == EINTR)
- continue;
- else
- return SERIAL_ERROR; /* Got an error from select or poll */
- }
-
- return 0;
- }
-}
-
-/* Read a character with user-specified timeout. TIMEOUT is number of seconds
- to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- char if successful. Returns -2 if timeout expired, EOF if line dropped
- dead, or -3 for any other error (see errno in that case). */
-
-static int
-do_unix_readchar (struct serial *scb, int timeout)
-{
- int status;
- int delta;
-
- /* We have to be able to keep the GUI alive here, so we break the
- original timeout into steps of 1 second, running the "keep the
- GUI alive" hook each time through the loop.
-
- Also, timeout = 0 means to poll, so we just set the delta to 0,
- so we will only go through the loop once. */
-
- delta = (timeout == 0 ? 0 : 1);
- while (1)
- {
-
- /* N.B. The UI may destroy our world (for instance by calling
- remote_stop,) in which case we want to get out of here as
- quickly as possible. It is not safe to touch scb, since
- someone else might have freed it. The
- deprecated_ui_loop_hook signals that we should exit by
- returning 1. */
-
- if (deprecated_ui_loop_hook)
- {
- if (deprecated_ui_loop_hook (0))
- return SERIAL_TIMEOUT;
- }
-
- status = ser_unix_wait_for (scb, delta);
- if (timeout > 0)
- timeout -= delta;
-
- /* If we got a character or an error back from wait_for, then we can
- break from the loop before the timeout is completed. */
-
- if (status != SERIAL_TIMEOUT)
- {
- break;
- }
-
- /* If we have exhausted the original timeout, then generate
- a SERIAL_TIMEOUT, and pass it out of the loop. */
-
- else if (timeout == 0)
- {
- status = SERIAL_TIMEOUT;
- break;
- }
- }
-
- if (status < 0)
- return status;
-
- while (1)
- {
- status = read (scb->fd, scb->buf, BUFSIZ);
- if (status != -1 || errno != EINTR)
- break;
- }
-
- if (status <= 0)
- {
- if (status == 0)
- return SERIAL_TIMEOUT; /* 0 chars means timeout [may need to
- distinguish between EOF & timeouts
- someday] */
- else
- return SERIAL_ERROR; /* Got an error from read */
- }
-
- scb->bufcnt = status;
- scb->bufcnt--;
- scb->bufp = scb->buf;
- return *scb->bufp++;
-}
-
-/* Perform operations common to both old and new readchar. */
-
-/* Return the next character from the input FIFO. If the FIFO is
- empty, call the SERIAL specific routine to try and read in more
- characters.
-
- Initially data from the input FIFO is returned (fd_event()
- pre-reads the input into that FIFO. Once that has been emptied,
- further data is obtained by polling the input FD using the device
- specific readchar() function. Note: reschedule() is called after
- every read. This is because there is no guarentee that the lower
- level fd_event() poll_event() code (which also calls reschedule())
- will be called. */
-
-static int
-generic_readchar (struct serial *scb, int timeout,
- int (do_readchar) (struct serial *scb, int timeout))
-{
- int ch;
- if (scb->bufcnt > 0)
- {
- ch = *scb->bufp;
- scb->bufcnt--;
- scb->bufp++;
- }
- else if (scb->bufcnt < 0)
- {
- /* Some errors/eof are are sticky. */
- ch = scb->bufcnt;
- }
- else
- {
- ch = do_readchar (scb, timeout);
- if (ch < 0)
- {
- switch ((enum serial_rc) ch)
- {
- case SERIAL_EOF:
- case SERIAL_ERROR:
- /* Make the error/eof stick. */
- scb->bufcnt = ch;
- break;
- case SERIAL_TIMEOUT:
- scb->bufcnt = 0;
- break;
- }
- }
- }
- reschedule (scb);
- return ch;
-}
-
-int
-ser_unix_readchar (struct serial *scb, int timeout)
-{
- return generic_readchar (scb, timeout, do_unix_readchar);
-}
\f
void
_initialize_ser_hardwire (void)
ops->next = 0;
ops->open = hardwire_open;
ops->close = hardwire_close;
- /* FIXME: Don't replace this with the equivalent ser_unix*() until
+ /* FIXME: Don't replace this with the equivalent ser_base*() until
the old TERMIOS/SGTTY/... timer code has been flushed. cagney
1999-09-16. */
ops->readchar = hardwire_readchar;
ops->setstopbits = hardwire_setstopbits;
ops->drain_output = hardwire_drain_output;
ops->async = ser_base_async;
+ ops->read_prim = ser_unix_read_prim;
+ ops->write_prim = ser_unix_write_prim;
serial_add_interface (ops);
}
+
+int
+ser_unix_read_prim (struct serial *scb, size_t count)
+{
+ int status;
+
+ while (1)
+ {
+ status = read (scb->fd, scb->buf, count);
+ if (status != -1 || errno != EINTR)
+ break;
+ }
+ return status;
+}
+
+int
+ser_unix_write_prim (struct serial *scb, const void *buf, size_t len)
+{
+ /* ??? Historically, GDB has not retried calls to "write" that
+ result in EINTR. */
+ return write (scb->fd, buf, len);
+}
#ifndef SER_UNIX_H
#define SER_UNIX_H
-extern int ser_unix_readchar (struct serial *scb, int timeout);
+extern int ser_unix_read_prim (struct serial *scb, size_t count);
+extern int ser_unix_write_prim (struct serial *scb, const void *buf,
+ size_t count);
#endif
the specified function when ever there is something
interesting. */
void (*async) (struct serial *scb, int async_p);
+ /* Perform a low-level read operation, reading (at most) COUNT
+ bytes into SCB->BUF. */
+ int (*read_prim)(struct serial *scb, size_t count);
+ /* Perform a low-level write operation, writing (at most) COUNT
+ bytes from BUF. */
+ int (*write_prim)(struct serial *scb, const void *buf, size_t count);
};
/* Add a new serial interface to the interface list */
projects / thirdparty / binutils-gdb.git / commitdiff
