This also seemed like a good opportunity to reverse the sense of the
hook to "can", to avoid the awkward double negative in !CANNOT.
2017-09-15 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayard <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* target.def (can_change_mode_class): New hook.
(mode_rep_extended): Refer to it instead of CANNOT_CHANGE_MODE_CLASS.
(hard_regno_nregs): Likewise.
* hooks.h (hook_bool_mode_mode_reg_class_t_true): Declare.
* hooks.c (hook_bool_mode_mode_reg_class_t_true): New function.
* doc/tm.texi.in (CANNOT_CHANGE_MODE_CLASS): Replace with...
(TARGET_CAN_CHANGE_MODE_CLASS): ...this.
(LOAD_EXTEND_OP): Update accordingly.
* doc/tm.texi: Regenerate.
* doc/rtl.texi: Refer to TARGET_CAN_CHANGE_MODE_CLASS instead of
CANNOT_CHANGE_MODE_CLASS.
* hard-reg-set.h (REG_CANNOT_CHANGE_MODE_P): Replace with...
(REG_CAN_CHANGE_MODE_P): ...this new macro.
* combine.c (simplify_set): Update accordingly.
* emit-rtl.c (validate_subreg): Likewise.
* recog.c (general_operand): Likewise.
* regcprop.c (mode_change_ok): Likewise.
* reload1.c (choose_reload_regs): Likewise.
(inherit_piecemeal_p): Likewise.
* rtlanal.c (simplify_subreg_regno): Likewise.
* postreload.c (reload_cse_simplify_set): Use REG_CAN_CHANGE_MODE_P
instead of CANNOT_CHANGE_MODE_CLASS.
(reload_cse_simplify_operands): Likewise.
* reload.c (push_reload): Use targetm.can_change_mode_class
instead of CANNOT_CHANGE_MODE_CLASS.
(push_reload): Likewise. Also use REG_CAN_CHANGE_MODE_P instead of
REG_CANNOT_CHANGE_MODE_P.
* config/alpha/alpha.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/alpha/alpha.c (alpha_can_change_mode_class): New function.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/arm/arm.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/arm/arm.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(arm_can_change_mode_class): New function.
* config/arm/neon.md: Refer to TARGET_CAN_CHANGE_MODE_CLASS rather
than CANNOT_CHANGE_MODE_CLASS in comments.
* config/i386/i386.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/i386/i386-protos.h (ix86_cannot_change_mode_class): Delete.
* config/i386/i386.c (ix86_cannot_change_mode_class): Replace with...
(ix86_can_change_mode_class): ...this new function, inverting the
sense of the return value.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/ia64/ia64.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/ia64/ia64.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(ia64_can_change_mode_class): New function.
* config/m32c/m32c.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/m32c/m32c-protos.h (m32c_cannot_change_mode_class): Delete.
* config/m32c/m32c.c (m32c_cannot_change_mode_class): Replace with...
(m32c_can_change_mode_class): ...this new function, inverting the
sense of the return value.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/mips/mips.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/mips/mips-protos.h (mips_cannot_change_mode_class): Delete.
* config/mips/mips.c (mips_cannot_change_mode_class): Replace with...
(mips_can_change_mode_class): ...this new function, inverting the
sense of the return value.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/msp430/msp430.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/msp430/msp430.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(msp430_can_change_mode_class): New function.
* config/nvptx/nvptx.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/nvptx/nvptx.c (nvptx_can_change_mode_class): New function.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/pa/pa32-regs.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/pa/pa64-regs.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/pa/pa-protos.h (pa_cannot_change_mode_class): Delete.
* config/pa/pa.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(pa_cannot_change_mode_class): Replace with...
(pa_can_change_mode_class): ...this new function, inverting the
sense of the return value.
(pa_modes_tieable_p): Refer to TARGET_CAN_CHANGE_MODE_CLASS rather
than CANNOT_CHANGE_MODE_CLASS in comments.
* config/pdp11/pdp11.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/pdp11/pdp11-protos.h (pdp11_cannot_change_mode_class): Delete.
* config/pdp11/pdp11.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(pdp11_cannot_change_mode_class): Replace with...
(pdp11_can_change_mode_class): ...this new function, inverting the
sense of the return value.
* config/powerpcspe/powerpcspe.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/powerpcspe/powerpcspe-protos.h
(rs6000_cannot_change_mode_class_ptr): Delete.
* config/powerpcspe/powerpcspe.c
(rs6000_cannot_change_mode_class_ptr): Delete.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(rs6000_option_override_internal): Assign to
targetm.can_change_mode_class instead of
rs6000_cannot_change_mode_class_ptr.
(rs6000_cannot_change_mode_class): Replace with...
(rs6000_can_change_mode_class): ...this new function, inverting the
sense of the return value.
(rs6000_debug_cannot_change_mode_class): Replace with...
(rs6000_debug_can_change_mode_class): ...this new function.
* config/riscv/riscv.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/riscv/riscv.c (riscv_can_change_mode_class): New function.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/rs6000/rs6000.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/rs6000/rs6000-protos.h (rs6000_cannot_change_mode_class_ptr):
Delete.
* config/rs6000/rs6000.c (rs6000_cannot_change_mode_class_ptr): Delete.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(rs6000_option_override_internal): Assign to
targetm.can_change_mode_class instead of
rs6000_cannot_change_mode_class_ptr.
(rs6000_cannot_change_mode_class): Replace with...
(rs6000_can_change_mode_class): ...this new function, inverting the
sense of the return value.
(rs6000_debug_cannot_change_mode_class): Replace with...
(rs6000_debug_can_change_mode_class): ...this new function.
* config/s390/s390.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/s390/s390-protos.h (s390_cannot_change_mode_class): Delete.
* config/s390/s390.c (s390_cannot_change_mode_class): Replace with...
(s390_can_change_mode_class): ...this new function, inverting the
sense of the return value.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/sh/sh.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/sh/sh-protos.h (sh_cannot_change_mode_class): Delete.
* config/sh/sh.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(sh_cannot_change_mode_class): Replace with...
(sh_can_change_mode_class): ...this new function, inverting the
sense of the return value.
* config/sparc/sparc.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/sparc/sparc.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(sparc_can_change_mode_class): New function.
* config/spu/spu.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/spu/spu.c (spu_can_change_mode_class): New function.
(TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
* config/visium/visium.h (CANNOT_CHANGE_MODE_CLASS): Delete.
* config/visium/visium.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
(visium_can_change_mode_class): New function.
* system.h (CANNOT_CHANGE_MODE_CLASS): Poison.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@252816
138bc75d-0d04-0410-961f-
82ee72b054a4
+2017-09-15 Richard Sandiford <richard.sandiford@linaro.org>
+ Alan Hayard <alan.hayward@arm.com>
+ David Sherwood <david.sherwood@arm.com>
+
+ * target.def (can_change_mode_class): New hook.
+ (mode_rep_extended): Refer to it instead of CANNOT_CHANGE_MODE_CLASS.
+ (hard_regno_nregs): Likewise.
+ * hooks.h (hook_bool_mode_mode_reg_class_t_true): Declare.
+ * hooks.c (hook_bool_mode_mode_reg_class_t_true): New function.
+ * doc/tm.texi.in (CANNOT_CHANGE_MODE_CLASS): Replace with...
+ (TARGET_CAN_CHANGE_MODE_CLASS): ...this.
+ (LOAD_EXTEND_OP): Update accordingly.
+ * doc/tm.texi: Regenerate.
+ * doc/rtl.texi: Refer to TARGET_CAN_CHANGE_MODE_CLASS instead of
+ CANNOT_CHANGE_MODE_CLASS.
+ * hard-reg-set.h (REG_CANNOT_CHANGE_MODE_P): Replace with...
+ (REG_CAN_CHANGE_MODE_P): ...this new macro.
+ * combine.c (simplify_set): Update accordingly.
+ * emit-rtl.c (validate_subreg): Likewise.
+ * recog.c (general_operand): Likewise.
+ * regcprop.c (mode_change_ok): Likewise.
+ * reload1.c (choose_reload_regs): Likewise.
+ (inherit_piecemeal_p): Likewise.
+ * rtlanal.c (simplify_subreg_regno): Likewise.
+ * postreload.c (reload_cse_simplify_set): Use REG_CAN_CHANGE_MODE_P
+ instead of CANNOT_CHANGE_MODE_CLASS.
+ (reload_cse_simplify_operands): Likewise.
+ * reload.c (push_reload): Use targetm.can_change_mode_class
+ instead of CANNOT_CHANGE_MODE_CLASS.
+ (push_reload): Likewise. Also use REG_CAN_CHANGE_MODE_P instead of
+ REG_CANNOT_CHANGE_MODE_P.
+ * config/alpha/alpha.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/alpha/alpha.c (alpha_can_change_mode_class): New function.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/arm/arm.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/arm/arm.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (arm_can_change_mode_class): New function.
+ * config/arm/neon.md: Refer to TARGET_CAN_CHANGE_MODE_CLASS rather
+ than CANNOT_CHANGE_MODE_CLASS in comments.
+ * config/i386/i386.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/i386/i386-protos.h (ix86_cannot_change_mode_class): Delete.
+ * config/i386/i386.c (ix86_cannot_change_mode_class): Replace with...
+ (ix86_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/ia64/ia64.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/ia64/ia64.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (ia64_can_change_mode_class): New function.
+ * config/m32c/m32c.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/m32c/m32c-protos.h (m32c_cannot_change_mode_class): Delete.
+ * config/m32c/m32c.c (m32c_cannot_change_mode_class): Replace with...
+ (m32c_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/mips/mips.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/mips/mips-protos.h (mips_cannot_change_mode_class): Delete.
+ * config/mips/mips.c (mips_cannot_change_mode_class): Replace with...
+ (mips_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/msp430/msp430.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/msp430/msp430.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (msp430_can_change_mode_class): New function.
+ * config/nvptx/nvptx.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/nvptx/nvptx.c (nvptx_can_change_mode_class): New function.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/pa/pa32-regs.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/pa/pa64-regs.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/pa/pa-protos.h (pa_cannot_change_mode_class): Delete.
+ * config/pa/pa.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (pa_cannot_change_mode_class): Replace with...
+ (pa_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ (pa_modes_tieable_p): Refer to TARGET_CAN_CHANGE_MODE_CLASS rather
+ than CANNOT_CHANGE_MODE_CLASS in comments.
+ * config/pdp11/pdp11.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/pdp11/pdp11-protos.h (pdp11_cannot_change_mode_class): Delete.
+ * config/pdp11/pdp11.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (pdp11_cannot_change_mode_class): Replace with...
+ (pdp11_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ * config/powerpcspe/powerpcspe.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/powerpcspe/powerpcspe-protos.h
+ (rs6000_cannot_change_mode_class_ptr): Delete.
+ * config/powerpcspe/powerpcspe.c
+ (rs6000_cannot_change_mode_class_ptr): Delete.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (rs6000_option_override_internal): Assign to
+ targetm.can_change_mode_class instead of
+ rs6000_cannot_change_mode_class_ptr.
+ (rs6000_cannot_change_mode_class): Replace with...
+ (rs6000_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ (rs6000_debug_cannot_change_mode_class): Replace with...
+ (rs6000_debug_can_change_mode_class): ...this new function.
+ * config/riscv/riscv.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/riscv/riscv.c (riscv_can_change_mode_class): New function.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/rs6000/rs6000.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/rs6000/rs6000-protos.h (rs6000_cannot_change_mode_class_ptr):
+ Delete.
+ * config/rs6000/rs6000.c (rs6000_cannot_change_mode_class_ptr): Delete.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (rs6000_option_override_internal): Assign to
+ targetm.can_change_mode_class instead of
+ rs6000_cannot_change_mode_class_ptr.
+ (rs6000_cannot_change_mode_class): Replace with...
+ (rs6000_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ (rs6000_debug_cannot_change_mode_class): Replace with...
+ (rs6000_debug_can_change_mode_class): ...this new function.
+ * config/s390/s390.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/s390/s390-protos.h (s390_cannot_change_mode_class): Delete.
+ * config/s390/s390.c (s390_cannot_change_mode_class): Replace with...
+ (s390_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/sh/sh.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/sh/sh-protos.h (sh_cannot_change_mode_class): Delete.
+ * config/sh/sh.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (sh_cannot_change_mode_class): Replace with...
+ (sh_can_change_mode_class): ...this new function, inverting the
+ sense of the return value.
+ * config/sparc/sparc.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/sparc/sparc.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (sparc_can_change_mode_class): New function.
+ * config/spu/spu.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/spu/spu.c (spu_can_change_mode_class): New function.
+ (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ * config/visium/visium.h (CANNOT_CHANGE_MODE_CLASS): Delete.
+ * config/visium/visium.c (TARGET_CAN_CHANGE_MODE_CLASS): Redefine.
+ (visium_can_change_mode_class): New function.
+ * system.h (CANNOT_CHANGE_MODE_CLASS): Poison.
+
2017-09-15 Richard Biener <rguenther@suse.de>
PR tree-optimization/82217
== ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (src)))
+ (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))
&& (WORD_REGISTER_OPERATIONS || !paradoxical_subreg_p (src))
-#ifdef CANNOT_CHANGE_MODE_CLASS
&& ! (REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER
- && REG_CANNOT_CHANGE_MODE_P (REGNO (dest),
- GET_MODE (SUBREG_REG (src)),
- GET_MODE (src)))
-#endif
+ && !REG_CAN_CHANGE_MODE_P (REGNO (dest),
+ GET_MODE (SUBREG_REG (src)),
+ GET_MODE (src)))
&& (REG_P (dest)
|| (GET_CODE (dest) == SUBREG
&& REG_P (SUBREG_REG (dest)))))
? alpha_hard_regno_mode_ok (32, mode2)
: true);
}
+
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
+
+static bool
+alpha_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
+{
+ return (GET_MODE_SIZE (from) == GET_MODE_SIZE (to)
+ || !reg_classes_intersect_p (FLOAT_REGS, rclass));
+}
\f
/* Initialize the GCC target structure. */
#if TARGET_ABI_OPEN_VMS
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P alpha_modes_tieable_p
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS alpha_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
#define PREFERRED_RELOAD_CLASS alpha_preferred_reload_class
-/* Return the class of registers that cannot change mode from FROM to TO. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO) \
- ? reg_classes_intersect_p (FLOAT_REGS, CLASS) : 0)
-
/* Provide the cost of a branch. Exact meaning under development. */
#define BRANCH_COST(speed_p, predictable_p) 5
\f
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P arm_modes_tieable_p
+
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS arm_can_change_mode_class
\f
/* Obstack for minipool constant handling. */
static struct obstack minipool_obstack;
return false;
}
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS.
+
+ In VFPv1, VFP registers could only be accessed in the mode they were
+ set, so subregs would be invalid there. However, we don't support
+ VFPv1 at the moment, and the restriction was lifted in VFPv2.
+
+ In big-endian mode, modes greater than word size (i.e. DFmode) are stored in
+ VFP registers in little-endian order. We can't describe that accurately to
+ GCC, so avoid taking subregs of such values.
+
+ The only exception is going from a 128-bit to a 64-bit type. In that
+ case the data layout happens to be consistent for big-endian, so we
+ explicitly allow that case. */
+
+static bool
+arm_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
+{
+ if (TARGET_BIG_END
+ && !(GET_MODE_SIZE (from) == 16 && GET_MODE_SIZE (to) == 8)
+ && (GET_MODE_SIZE (from) > UNITS_PER_WORD
+ || GET_MODE_SIZE (to) > UNITS_PER_WORD)
+ && reg_classes_intersect_p (VFP_REGS, rclass))
+ return false;
+ return true;
+}
+
#if CHECKING_P
namespace selftest {
or could index an array. */
#define REGNO_REG_CLASS(REGNO) arm_regno_class (REGNO)
-/* In VFPv1, VFP registers could only be accessed in the mode they
- were set, so subregs would be invalid there. However, we don't
- support VFPv1 at the moment, and the restriction was lifted in
- VFPv2.
- In big-endian mode, modes greater than word size (i.e. DFmode) are stored in
- VFP registers in little-endian order. We can't describe that accurately to
- GCC, so avoid taking subregs of such values.
- The only exception is going from a 128-bit to a 64-bit type. In that case
- the data layout happens to be consistent for big-endian, so we explicitly allow
- that case. */
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- (TARGET_BIG_END \
- && !(GET_MODE_SIZE (FROM) == 16 && GET_MODE_SIZE (TO) == 8) \
- && (GET_MODE_SIZE (FROM) > UNITS_PER_WORD \
- || GET_MODE_SIZE (TO) > UNITS_PER_WORD) \
- && reg_classes_intersect_p (VFP_REGS, (CLASS)))
-
/* The class value for index registers, and the one for base regs. */
#define INDEX_REG_CLASS (TARGET_THUMB1 ? LO_REGS : GENERAL_REGS)
#define BASE_REG_CLASS (TARGET_THUMB1 ? LO_REGS : CORE_REGS)
(match_operand:V4HF 1 "s_register_operand"))]
"TARGET_NEON && TARGET_FP16"
{
- /* We need to use force_reg to avoid CANNOT_CHANGE_MODE_CLASS
+ /* We need to use force_reg to avoid TARGET_CAN_CHANGE_MODE_CLASS
causing an ICE on big-endian because it cannot extract subregs in
this case. */
if (can_create_pseudo_p ())
(match_operand:V8HF 1 ""))]
"TARGET_NEON && TARGET_FP16"
{
- /* We need to use force_reg to avoid CANNOT_CHANGE_MODE_CLASS
+ /* We need to use force_reg to avoid TARGET_CAN_CHANGE_MODE_CLASS
causing an ICE on big-endian because it cannot extract subregs in
this case. */
if (can_create_pseudo_p ())
extern void ix86_split_fp_branch (enum rtx_code code, rtx, rtx,
rtx, rtx, rtx);
-extern bool ix86_cannot_change_mode_class (machine_mode,
- machine_mode, enum reg_class);
extern bool ix86_libc_has_function (enum function_class fn_class);
}
}
-/* Return true if the registers in CLASS cannot represent the change from
- modes FROM to TO. */
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
-bool
-ix86_cannot_change_mode_class (machine_mode from, machine_mode to,
- enum reg_class regclass)
+static bool
+ix86_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t regclass)
{
if (from == to)
- return false;
+ return true;
/* x87 registers can't do subreg at all, as all values are reformatted
to extended precision. */
if (MAYBE_FLOAT_CLASS_P (regclass))
- return true;
+ return false;
if (MAYBE_SSE_CLASS_P (regclass) || MAYBE_MMX_CLASS_P (regclass))
{
drop the subreg from (subreg:SI (reg:HI 100) 0). This affects
the vec_dupv4hi pattern. */
if (GET_MODE_SIZE (from) < 4)
- return true;
+ return false;
}
- return false;
+ return true;
}
/* Return the cost of moving data of mode M between a
#define TARGET_HARD_REGNO_CALL_PART_CLOBBERED \
ix86_hard_regno_call_part_clobbered
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS ix86_can_change_mode_class
+
#if CHECKING_P
#undef TARGET_RUN_TARGET_SELFTESTS
#define TARGET_RUN_TARGET_SELFTESTS selftest::ix86_run_selftests
#define INDEX_REG_CLASS INDEX_REGS
#define BASE_REG_CLASS GENERAL_REGS
-
-/* Return a class of registers that cannot change FROM mode to TO mode. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- ix86_cannot_change_mode_class (FROM, TO, CLASS)
\f
/* Stack layout; function entry, exit and calling. */
static unsigned int ia64_hard_regno_nregs (unsigned int, machine_mode);
static bool ia64_hard_regno_mode_ok (unsigned int, machine_mode);
static bool ia64_modes_tieable_p (machine_mode, machine_mode);
+static bool ia64_can_change_mode_class (machine_mode, machine_mode,
+ reg_class_t);
#define MAX_VECT_LEN 8
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P ia64_modes_tieable_p
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS ia64_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
/* Returns TRUE iff the target attribute indicated by ATTR_ID takes a plain
gcc_assert (ok);
}
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS.
+
+ In BR regs, we can't change the DImode at all.
+ In FP regs, we can't change FP values to integer values and vice versa,
+ but we can change e.g. DImode to SImode, and V2SFmode into DImode. */
+
+static bool
+ia64_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
+{
+ if (reg_classes_intersect_p (rclass, BR_REGS))
+ return from == to;
+ if (SCALAR_FLOAT_MODE_P (from) != SCALAR_FLOAT_MODE_P (to))
+ return !reg_classes_intersect_p (rclass, FR_REGS);
+ return true;
+}
+
#include "gt-ia64.h"
: (((CLASS) == FR_REGS || (CLASS) == FP_REGS) && (MODE) == RFmode) ? 1 \
: (((CLASS) == FR_REGS || (CLASS) == FP_REGS) && (MODE) == XCmode) ? 2 \
: (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
-
-/* In BR regs, we can't change the DImode at all.
- In FP regs, we can't change FP values to integer values and vice versa,
- but we can change e.g. DImode to SImode, and V2SFmode into DImode. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- (reg_classes_intersect_p (CLASS, BR_REGS) \
- ? (FROM) != (TO) \
- : (SCALAR_FLOAT_MODE_P (FROM) != SCALAR_FLOAT_MODE_P (TO) \
- ? reg_classes_intersect_p (CLASS, FR_REGS) \
- : 0))
\f
/* Basic Stack Layout */
#ifdef RTX_CODE
-int m32c_cannot_change_mode_class (machine_mode, machine_mode, int);
rtx m32c_eh_return_stackadj_rtx (void);
void m32c_emit_eh_epilogue (rtx);
int m32c_expand_cmpstr (rtx *);
return max;
}
-/* Implements CANNOT_CHANGE_MODE_CLASS. Only r0 and r1 can change to
+/* Implements TARGET_CAN_CHANGE_MODE_CLASS. Only r0 and r1 can change to
QI (r0l, r1l) because the chip doesn't support QI ops on other
registers (well, it does on a0/a1 but if we let gcc do that, reload
suffers). Otherwise, we allow changes to larger modes. */
-int
-m32c_cannot_change_mode_class (machine_mode from,
- machine_mode to, int rclass)
+static bool
+m32c_can_change_mode_class (machine_mode from,
+ machine_mode to, reg_class_t rclass)
{
int rn;
#if DEBUG0
- fprintf (stderr, "cannot change from %s to %s in %s\n",
+ fprintf (stderr, "can change from %s to %s in %s\n",
mode_name[from], mode_name[to], class_names[rclass]);
#endif
for (rn = 0; rn < FIRST_PSEUDO_REGISTER; rn++)
if (class_contents[rclass][0] & (1 << rn))
if (! m32c_hard_regno_mode_ok (rn, to))
- return 1;
+ return false;
if (to == QImode)
- return (class_contents[rclass][0] & 0x1ffa);
+ return (class_contents[rclass][0] & 0x1ffa) == 0;
if (class_contents[rclass][0] & 0x0005 /* r0, r1 */
&& GET_MODE_SIZE (from) > 1)
- return 0;
+ return true;
if (GET_MODE_SIZE (from) > 2) /* all other regs */
- return 0;
+ return true;
- return 1;
+ return false;
}
/* Helpers for the rest of the file. */
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P m32c_modes_tieable_p
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS m32c_can_change_mode_class
+
/* The Global `targetm' Variable. */
struct gcc_target targetm = TARGET_INITIALIZER;
#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true
-#define CANNOT_CHANGE_MODE_CLASS(F,T,C) m32c_cannot_change_mode_class(F,T,C)
-
/* STACK AND CALLING */
/* Frame Layout */
extern bool mips_const_vector_bitimm_clr_p (rtx, machine_mode);
extern rtx mips_msa_vec_parallel_const_half (machine_mode, bool);
extern rtx mips_gen_const_int_vector (machine_mode, HOST_WIDE_INT);
-extern bool mips_cannot_change_mode_class (machine_mode,
- machine_mode, enum reg_class);
extern bool mips_dangerous_for_la25_p (rtx);
extern enum reg_class mips_secondary_reload_class (enum reg_class,
machine_mode,
return (GET_MODE_SIZE (mode) + size - 1) / size;
}
-/* Implement CANNOT_CHANGE_MODE_CLASS. */
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
-bool
-mips_cannot_change_mode_class (machine_mode from,
- machine_mode to,
- enum reg_class rclass)
+static bool
+mips_can_change_mode_class (machine_mode from,
+ machine_mode to, reg_class_t rclass)
{
/* Allow conversions between different Loongson integer vectors,
and between those vectors and DImode. */
if (GET_MODE_SIZE (from) == 8 && GET_MODE_SIZE (to) == 8
&& INTEGRAL_MODE_P (from) && INTEGRAL_MODE_P (to))
- return false;
+ return true;
/* Allow conversions between different MSA vector modes. */
if (MSA_SUPPORTED_MODE_P (from) && MSA_SUPPORTED_MODE_P (to))
- return false;
+ return true;
/* Otherwise, there are several problems with changing the modes of
values in floating-point registers:
We therefore disallow all mode changes involving FPRs. */
- return reg_classes_intersect_p (FP_REGS, rclass);
+ return !reg_classes_intersect_p (FP_REGS, rclass);
}
/* Implement target hook small_register_classes_for_mode_p. */
#undef TARGET_SECONDARY_MEMORY_NEEDED
#define TARGET_SECONDARY_MEMORY_NEEDED mips_secondary_memory_needed
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS mips_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
#include "gt-mips.h"
needed to represent mode MODE in a register of class CLASS. */
#define CLASS_MAX_NREGS(CLASS, MODE) mips_class_max_nregs (CLASS, MODE)
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- mips_cannot_change_mode_class (FROM, TO, CLASS)
\f
/* Stack layout; function entry, exit and calling. */
right shift instruction to perform the rest of the shift. */
return "rrum.w\t#1, %0 { rpt\t%Z2 { rrax.w\t%0"; /* Six bytes. */
}
+
+/* Stop GCC from thinking that it can eliminate (SUBREG:PSI (SI)). */
+
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS msp430_can_change_mode_class
+
+static bool
+msp430_can_change_mode_class (machine_mode from, machine_mode to, reg_class_t)
+{
+ if ((to == PSImode && from == SImode)
+ || (to == SImode && from == PSImode)
+ || (to == DImode && from == PSImode)
+ || (to == PSImode && from == DImode))
+ return false;
+ return true;
+}
\f
struct gcc_target targetm = TARGET_INITIALIZER;
#define HARD_REGNO_CALLER_SAVE_MODE(REGNO,NREGS,MODE) \
((TARGET_LARGE && ((NREGS) <= 2)) ? PSImode : choose_hard_reg_mode ((REGNO), (NREGS), false))
-/* Also stop GCC from thinking that it can eliminate (SUBREG:PSI (SI)). */
-#define CANNOT_CHANGE_MODE_CLASS(FROM,TO,CLASS) \
- ( ((TO) == PSImode && (FROM) == SImode) \
- || ((TO) == SImode && (FROM) == PSImode) \
- || ((TO) == DImode && (FROM) == PSImode) \
- || ((TO) == PSImode && (FROM) == DImode) \
- )
-
#define ACCUMULATE_OUTGOING_ARGS 1
#undef ASM_DECLARE_FUNCTION_NAME
return 1;
}
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
+
+static bool
+nvptx_can_change_mode_class (machine_mode, machine_mode, reg_class_t)
+{
+ return false;
+}
+
#undef TARGET_OPTION_OVERRIDE
#define TARGET_OPTION_OVERRIDE nvptx_option_override
#undef TARGET_HARD_REGNO_NREGS
#define TARGET_HARD_REGNO_NREGS nvptx_hard_regno_nregs
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS nvptx_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
#include "gt-nvptx.h"
#define FIXED_REGISTERS { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
#define CALL_USED_REGISTERS { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }
-#define CANNOT_CHANGE_MODE_CLASS(M1, M2, CLS) \
- ((void)(M1), (void)(M2), (void)(CLS), true)
-
/* Register Classes. */
enum reg_class { NO_REGS, ALL_REGS, LIM_REG_CLASSES };
#define REG_CLASS_NAMES { "NO_REGS", "ALL_REGS" }
unsigned HOST_WIDE_INT,
unsigned int);
extern void pa_hpux_asm_output_external (FILE *, tree, const char *);
-extern bool pa_cannot_change_mode_class (machine_mode, machine_mode,
- enum reg_class);
extern HOST_WIDE_INT pa_initial_elimination_offset (int, int);
extern const int pa_magic_milli[];
static unsigned int pa_hard_regno_nregs (unsigned int, machine_mode);
static bool pa_hard_regno_mode_ok (unsigned int, machine_mode);
static bool pa_modes_tieable_p (machine_mode, machine_mode);
+static bool pa_can_change_mode_class (machine_mode, machine_mode, reg_class_t);
/* The following extra sections are only used for SOM. */
static GTY(()) section *som_readonly_data_section;
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P pa_modes_tieable_p
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS pa_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
/* Parse the -mfixed-range= option string. */
}
#endif
-/* Return true if a change from mode FROM to mode TO for a register
- in register class RCLASS is invalid. */
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
-bool
-pa_cannot_change_mode_class (machine_mode from, machine_mode to,
- enum reg_class rclass)
+static bool
+pa_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
{
if (from == to)
- return false;
+ return true;
if (GET_MODE_SIZE (from) == GET_MODE_SIZE (to))
- return false;
+ return true;
/* Reject changes to/from modes with zero size. */
if (!GET_MODE_SIZE (from) || !GET_MODE_SIZE (to))
- return true;
+ return false;
/* Reject changes to/from complex and vector modes. */
if (COMPLEX_MODE_P (from) || VECTOR_MODE_P (from)
|| COMPLEX_MODE_P (to) || VECTOR_MODE_P (to))
- return true;
+ return false;
/* There is no way to load QImode or HImode values directly from memory
to a FP register. SImode loads to the FP registers are not zero
of LOAD_EXTEND_OP. Thus, we can't allow changing between modes with
different sizes in the floating-point registers. */
if (MAYBE_FP_REG_CLASS_P (rclass))
- return true;
+ return false;
/* TARGET_HARD_REGNO_MODE_OK places modes with sizes larger than a word
in specific sets of registers. Thus, we cannot allow changing
to a larger mode when it's larger than a word. */
if (GET_MODE_SIZE (to) > UNITS_PER_WORD
&& GET_MODE_SIZE (to) > GET_MODE_SIZE (from))
- return true;
+ return false;
- return false;
+ return true;
}
/* Implement TARGET_MODES_TIEABLE_P.
are not ok in the floating-point registers. However, this prevents
tieing these modes to SImode and DImode in the general registers.
So, this isn't a good idea. We rely on TARGET_HARD_REGNO_MODE_OK and
- CANNOT_CHANGE_MODE_CLASS to prevent these modes from being used
+ TARGET_CAN_CHANGE_MODE_CLASS to prevent these modes from being used
in the floating-point registers. */
static bool
{0x00000000, 0x00000000, 0x01000000}, /* SHIFT_REGS */ \
{0xfffffffe, 0xffffffff, 0x03ffffff}} /* ALL_REGS */
-/* Defines invalid mode changes. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- pa_cannot_change_mode_class (FROM, TO, CLASS)
-
/* Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
or could index an array. */
{0x00000000, 0x10000000}, /* SHIFT_REGS */ \
{0xfffffffe, 0x3fffffff}} /* ALL_REGS */
-/* Defines invalid mode changes. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- pa_cannot_change_mode_class (FROM, TO, CLASS)
-
/* Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
or could index an array. */
extern const char *output_block_move (rtx *);
extern const char *output_jump (enum rtx_code, int, int);
extern void print_operand_address (FILE *, rtx);
-extern bool pdp11_cannot_change_mode_class (machine_mode,
- machine_mode, enum reg_class);
typedef enum { no_action, dec_before, inc_after } pdp11_action;
typedef enum { little, either, big } pdp11_partorder;
extern bool pdp11_expand_operands (rtx *, rtx [][2], int,
#undef TARGET_SECONDARY_MEMORY_NEEDED
#define TARGET_SECONDARY_MEMORY_NEEDED pdp11_secondary_memory_needed
+
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS pdp11_can_change_mode_class
\f
/* A helper function to determine if REGNO should be saved in the
current function's stack frame. */
return 0;
}
-/* Implement CANNOT_CHANGE_MODE_CLASS. */
-bool
-pdp11_cannot_change_mode_class (machine_mode from,
- machine_mode to,
- enum reg_class rclass)
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
+static bool
+pdp11_can_change_mode_class (machine_mode from,
+ machine_mode to,
+ reg_class_t rclass)
{
/* Also, FPU registers contain a whole float value and the parts of
it are not separately accessible.
So we disallow all mode changes involving FPRs. */
if (FLOAT_MODE_P (from) != FLOAT_MODE_P (to))
- return true;
+ return false;
- return reg_classes_intersect_p (FPU_REGS, rclass);
+ return !reg_classes_intersect_p (FPU_REGS, rclass);
}
/* TARGET_PREFERRED_RELOAD_CLASS
((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD): \
1 \
)
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- pdp11_cannot_change_mode_class (FROM, TO, CLASS)
\f
/* Stack layout; function entry, exit and calling. */
extern enum reg_class (*rs6000_secondary_reload_class_ptr) (enum reg_class,
machine_mode,
rtx);
-extern bool (*rs6000_cannot_change_mode_class_ptr) (machine_mode,
- machine_mode,
- enum reg_class);
extern void rs6000_secondary_reload_inner (rtx, rtx, rtx, bool);
extern void rs6000_secondary_reload_gpr (rtx, rtx, rtx, bool);
extern int paired_emit_vector_cond_expr (rtx, rtx, rtx,
static bool rs6000_debug_secondary_memory_needed (machine_mode,
reg_class_t,
reg_class_t);
-static bool rs6000_cannot_change_mode_class (machine_mode,
- machine_mode,
- enum reg_class);
-static bool rs6000_debug_cannot_change_mode_class (machine_mode,
- machine_mode,
- enum reg_class);
+static bool rs6000_debug_can_change_mode_class (machine_mode,
+ machine_mode,
+ reg_class_t);
static bool rs6000_save_toc_in_prologue_p (void);
static rtx rs6000_internal_arg_pointer (void);
enum reg_class (*rs6000_preferred_reload_class_ptr) (rtx, enum reg_class)
= rs6000_preferred_reload_class;
-bool (*rs6000_cannot_change_mode_class_ptr) (machine_mode,
- machine_mode,
- enum reg_class)
- = rs6000_cannot_change_mode_class;
-
const int INSN_NOT_AVAILABLE = -1;
static void rs6000_print_isa_options (FILE *, int, const char *,
#undef TARGET_SLOW_UNALIGNED_ACCESS
#define TARGET_SLOW_UNALIGNED_ACCESS rs6000_slow_unaligned_access
+
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS rs6000_can_change_mode_class
\f
/* Processor table. */
= rs6000_debug_secondary_reload_class;
targetm.secondary_memory_needed
= rs6000_debug_secondary_memory_needed;
- rs6000_cannot_change_mode_class_ptr
- = rs6000_debug_cannot_change_mode_class;
+ targetm.can_change_mode_class
+ = rs6000_debug_can_change_mode_class;
rs6000_preferred_reload_class_ptr
= rs6000_debug_preferred_reload_class;
rs6000_legitimize_reload_address_ptr
return ret;
}
-/* Return nonzero if for CLASS a mode change from FROM to TO is invalid. */
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
static bool
-rs6000_cannot_change_mode_class (machine_mode from,
- machine_mode to,
- enum reg_class rclass)
+rs6000_can_change_mode_class (machine_mode from,
+ machine_mode to,
+ reg_class_t rclass)
{
unsigned from_size = GET_MODE_SIZE (from);
unsigned to_size = GET_MODE_SIZE (to);
values. */
if (to_float128_vector_p && from_float128_vector_p)
- return false;
+ return true;
else if (to_float128_vector_p || from_float128_vector_p)
- return true;
+ return false;
/* TDmode in floating-mode registers must always go into a register
pair with the most significant word in the even-numbered register
to match ISA requirements. In little-endian mode, this does not
match subreg numbering, so we cannot allow subregs. */
if (!BYTES_BIG_ENDIAN && (to == TDmode || from == TDmode))
- return true;
+ return false;
if (from_size < 8 || to_size < 8)
- return true;
+ return false;
if (from_size == 8 && (8 * to_nregs) != to_size)
- return true;
+ return false;
if (to_size == 8 && (8 * from_nregs) != from_size)
- return true;
+ return false;
- return false;
+ return true;
}
else
- return false;
+ return true;
}
if (TARGET_E500_DOUBLE
|| (((to) == DDmode) + ((from) == DDmode)) == 1
|| (((to) == TDmode) + ((from) == TDmode)) == 1
|| (((to) == DImode) + ((from) == DImode)) == 1))
- return true;
+ return false;
/* Since the VSX register set includes traditional floating point registers
and altivec registers, just check for the size being different instead of
unsigned num_regs = (from_size + 15) / 16;
if (hard_regno_nregs (FIRST_FPR_REGNO, to) > num_regs
|| hard_regno_nregs (FIRST_FPR_REGNO, from) > num_regs)
- return true;
+ return false;
- return (from_size != 8 && from_size != 16);
+ return (from_size == 8 || from_size == 16);
}
if (TARGET_ALTIVEC && rclass == ALTIVEC_REGS
&& (ALTIVEC_VECTOR_MODE (from) + ALTIVEC_VECTOR_MODE (to)) == 1)
- return true;
+ return false;
if (TARGET_SPE && (SPE_VECTOR_MODE (from) + SPE_VECTOR_MODE (to)) == 1
&& reg_classes_intersect_p (GENERAL_REGS, rclass))
- return true;
+ return false;
- return false;
+ return true;
}
-/* Debug version of rs6000_cannot_change_mode_class. */
+/* Debug version of rs6000_can_change_mode_class. */
static bool
-rs6000_debug_cannot_change_mode_class (machine_mode from,
- machine_mode to,
- enum reg_class rclass)
+rs6000_debug_can_change_mode_class (machine_mode from,
+ machine_mode to,
+ reg_class_t rclass)
{
- bool ret = rs6000_cannot_change_mode_class (from, to, rclass);
+ bool ret = rs6000_can_change_mode_class (from, to, rclass);
fprintf (stderr,
- "rs6000_cannot_change_mode_class, return %s, from = %s, "
+ "rs6000_can_change_mode_class, return %s, from = %s, "
"to = %s, rclass = %s\n",
ret ? "true" : "false",
GET_MODE_NAME (from), GET_MODE_NAME (to),
registers can hold 128 bits. */
#define CLASS_MAX_NREGS(CLASS, MODE) rs6000_class_max_nregs[(MODE)][(CLASS)]
-/* Return nonzero if for CLASS a mode change from FROM to TO is invalid. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- rs6000_cannot_change_mode_class_ptr (FROM, TO, CLASS)
-
/* Stack layout; function entry, exit and calling. */
/* Define this if pushing a word on the stack
return riscv_slow_unaligned_access_p;
}
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
+
+static bool
+riscv_can_change_mode_class (machine_mode, machine_mode, reg_class_t rclass)
+{
+ return !reg_classes_intersect_p (FP_REGS, rclass);
+}
+
/* Initialize the GCC target structure. */
#undef TARGET_ASM_ALIGNED_HI_OP
#define TARGET_ASM_ALIGNED_HI_OP "\t.half\t"
#undef TARGET_SECONDARY_MEMORY_NEEDED
#define TARGET_SECONDARY_MEMORY_NEEDED riscv_secondary_memory_needed
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS riscv_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
#include "gt-riscv.h"
(((VALUE) | ((1UL<<31) - IMM_REACH)) == ((1UL<<31) - IMM_REACH) \
|| ((VALUE) | ((1UL<<31) - IMM_REACH)) + IMM_REACH == 0)
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- reg_classes_intersect_p (FP_REGS, CLASS)
-
/* Stack layout; function entry, exit and calling. */
#define STACK_GROWS_DOWNWARD 1
extern enum reg_class (*rs6000_secondary_reload_class_ptr) (enum reg_class,
machine_mode,
rtx);
-extern bool (*rs6000_cannot_change_mode_class_ptr) (machine_mode,
- machine_mode,
- enum reg_class);
extern void rs6000_secondary_reload_inner (rtx, rtx, rtx, bool);
extern void rs6000_secondary_reload_gpr (rtx, rtx, rtx, bool);
extern int paired_emit_vector_cond_expr (rtx, rtx, rtx,
static bool rs6000_debug_secondary_memory_needed (machine_mode,
reg_class_t,
reg_class_t);
-static bool rs6000_cannot_change_mode_class (machine_mode,
- machine_mode,
- enum reg_class);
-static bool rs6000_debug_cannot_change_mode_class (machine_mode,
- machine_mode,
- enum reg_class);
+static bool rs6000_debug_can_change_mode_class (machine_mode,
+ machine_mode,
+ reg_class_t);
static bool rs6000_save_toc_in_prologue_p (void);
static rtx rs6000_internal_arg_pointer (void);
enum reg_class (*rs6000_preferred_reload_class_ptr) (rtx, enum reg_class)
= rs6000_preferred_reload_class;
-bool (*rs6000_cannot_change_mode_class_ptr) (machine_mode,
- machine_mode,
- enum reg_class)
- = rs6000_cannot_change_mode_class;
-
const int INSN_NOT_AVAILABLE = -1;
static void rs6000_print_isa_options (FILE *, int, const char *,
#undef TARGET_SLOW_UNALIGNED_ACCESS
#define TARGET_SLOW_UNALIGNED_ACCESS rs6000_slow_unaligned_access
+
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS rs6000_can_change_mode_class
\f
/* Processor table. */
= rs6000_debug_secondary_reload_class;
targetm.secondary_memory_needed
= rs6000_debug_secondary_memory_needed;
- rs6000_cannot_change_mode_class_ptr
- = rs6000_debug_cannot_change_mode_class;
+ targetm.can_change_mode_class
+ = rs6000_debug_can_change_mode_class;
rs6000_preferred_reload_class_ptr
= rs6000_debug_preferred_reload_class;
rs6000_legitimize_reload_address_ptr
return ret;
}
-/* Return nonzero if for CLASS a mode change from FROM to TO is invalid. */
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
static bool
-rs6000_cannot_change_mode_class (machine_mode from,
- machine_mode to,
- enum reg_class rclass)
+rs6000_can_change_mode_class (machine_mode from,
+ machine_mode to,
+ reg_class_t rclass)
{
unsigned from_size = GET_MODE_SIZE (from);
unsigned to_size = GET_MODE_SIZE (to);
values. */
if (to_float128_vector_p && from_float128_vector_p)
- return false;
+ return true;
else if (to_float128_vector_p || from_float128_vector_p)
- return true;
+ return false;
/* TDmode in floating-mode registers must always go into a register
pair with the most significant word in the even-numbered register
to match ISA requirements. In little-endian mode, this does not
match subreg numbering, so we cannot allow subregs. */
if (!BYTES_BIG_ENDIAN && (to == TDmode || from == TDmode))
- return true;
+ return false;
if (from_size < 8 || to_size < 8)
- return true;
+ return false;
if (from_size == 8 && (8 * to_nregs) != to_size)
- return true;
+ return false;
if (to_size == 8 && (8 * from_nregs) != from_size)
- return true;
+ return false;
- return false;
+ return true;
}
else
- return false;
+ return true;
}
/* Since the VSX register set includes traditional floating point registers
unsigned num_regs = (from_size + 15) / 16;
if (hard_regno_nregs (FIRST_FPR_REGNO, to) > num_regs
|| hard_regno_nregs (FIRST_FPR_REGNO, from) > num_regs)
- return true;
+ return false;
- return (from_size != 8 && from_size != 16);
+ return (from_size == 8 || from_size == 16);
}
if (TARGET_ALTIVEC && rclass == ALTIVEC_REGS
&& (ALTIVEC_VECTOR_MODE (from) + ALTIVEC_VECTOR_MODE (to)) == 1)
- return true;
+ return false;
- return false;
+ return true;
}
-/* Debug version of rs6000_cannot_change_mode_class. */
+/* Debug version of rs6000_can_change_mode_class. */
static bool
-rs6000_debug_cannot_change_mode_class (machine_mode from,
- machine_mode to,
- enum reg_class rclass)
+rs6000_debug_can_change_mode_class (machine_mode from,
+ machine_mode to,
+ reg_class_t rclass)
{
- bool ret = rs6000_cannot_change_mode_class (from, to, rclass);
+ bool ret = rs6000_can_change_mode_class (from, to, rclass);
fprintf (stderr,
- "rs6000_cannot_change_mode_class, return %s, from = %s, "
+ "rs6000_can_change_mode_class, return %s, from = %s, "
"to = %s, rclass = %s\n",
ret ? "true" : "false",
GET_MODE_NAME (from), GET_MODE_NAME (to),
registers can hold 128 bits. */
#define CLASS_MAX_NREGS(CLASS, MODE) rs6000_class_max_nregs[(MODE)][(CLASS)]
-/* Return nonzero if for CLASS a mode change from FROM to TO is invalid. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- rs6000_cannot_change_mode_class_ptr (FROM, TO, CLASS)
-
/* Stack layout; function entry, exit and calling. */
/* Define this if pushing a word on the stack
extern void s390_set_has_landing_pad_p (bool);
extern bool s390_hard_regno_rename_ok (unsigned int, unsigned int);
extern int s390_class_max_nregs (enum reg_class, machine_mode);
-extern int s390_cannot_change_mode_class (machine_mode, machine_mode,
- enum reg_class);
extern bool s390_function_arg_vector (machine_mode, const_tree);
#if S390_USE_TARGET_ATTRIBUTE
extern tree s390_valid_target_attribute_tree (tree args,
return (GET_MODE_SIZE (mode) + reg_size - 1) / reg_size;
}
-/* Return TRUE if changing mode from FROM to TO should not be allowed
- for register class CLASS. */
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
-int
-s390_cannot_change_mode_class (machine_mode from_mode,
- machine_mode to_mode,
- enum reg_class rclass)
+static bool
+s390_can_change_mode_class (machine_mode from_mode,
+ machine_mode to_mode,
+ reg_class_t rclass)
{
machine_mode small_mode;
machine_mode big_mode;
if (reg_classes_intersect_p (VEC_REGS, rclass)
&& ((from_mode == V1TFmode && to_mode == TFmode)
|| (from_mode == TFmode && to_mode == V1TFmode)))
- return 1;
+ return false;
if (GET_MODE_SIZE (from_mode) == GET_MODE_SIZE (to_mode))
- return 0;
+ return true;
if (GET_MODE_SIZE (from_mode) < GET_MODE_SIZE (to_mode))
{
if (reg_classes_intersect_p (VEC_REGS, rclass)
&& (GET_MODE_SIZE (small_mode) < 8
|| s390_class_max_nregs (VEC_REGS, big_mode) == 1))
- return 1;
+ return false;
/* Likewise for access registers, since they have only half the
word size on 64-bit. */
if (reg_classes_intersect_p (ACCESS_REGS, rclass))
- return 1;
+ return false;
- return 0;
+ return true;
}
/* Return true if we use LRA instead of reload pass. */
#undef TARGET_OPTION_RESTORE
#define TARGET_OPTION_RESTORE s390_function_specific_restore
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS s390_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
#include "gt-s390.h"
#define CLASS_MAX_NREGS(CLASS, MODE) \
s390_class_max_nregs ((CLASS), (MODE))
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- s390_cannot_change_mode_class ((FROM), (TO), (CLASS))
-
/* We can reverse a CC mode safely if we know whether it comes from a
floating point compare or not. With the vector modes it is encoded
as part of the mode.
extern bool sh_cfun_resbank_handler_p (void);
extern bool sh_attr_renesas_p (const_tree);
extern bool sh_cfun_attr_renesas_p (void);
-extern bool sh_cannot_change_mode_class
- (machine_mode, machine_mode, enum reg_class);
extern bool sh_small_register_classes_for_mode_p (machine_mode);
extern void sh_mark_label (rtx, int);
extern bool check_use_sfunc_addr (rtx_insn *, rtx);
static unsigned int sh_hard_regno_nregs (unsigned int, machine_mode);
static bool sh_hard_regno_mode_ok (unsigned int, machine_mode);
static bool sh_modes_tieable_p (machine_mode, machine_mode);
+static bool sh_can_change_mode_class (machine_mode, machine_mode, reg_class_t);
\f
static const struct attribute_spec sh_attribute_table[] =
{
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P sh_modes_tieable_p
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS sh_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
return choose_hard_reg_mode (regno, nregs, false);
}
-/* Return the class of registers for which a mode change from FROM to TO
- is invalid. */
-bool
-sh_cannot_change_mode_class (machine_mode from, machine_mode to,
- enum reg_class rclass)
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. */
+static bool
+sh_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
{
/* We want to enable the use of SUBREGs as a means to
VEC_SELECT a single element of a vector. */
on the stack with displacement addressing, as it happens with -O0.
Thus we disallow the mode change for -O0. */
if (to == SFmode && VECTOR_MODE_P (from) && GET_MODE_INNER (from) == SFmode)
- return optimize ? (reg_classes_intersect_p (GENERAL_REGS, rclass)) : false;
+ return optimize ? !reg_classes_intersect_p (GENERAL_REGS, rclass) : true;
if (GET_MODE_SIZE (from) != GET_MODE_SIZE (to))
{
if (TARGET_LITTLE_ENDIAN)
{
if (GET_MODE_SIZE (to) < 8 || GET_MODE_SIZE (from) < 8)
- return reg_classes_intersect_p (DF_REGS, rclass);
+ return !reg_classes_intersect_p (DF_REGS, rclass);
}
else
{
if (GET_MODE_SIZE (from) < 8)
- return reg_classes_intersect_p (DF_REGS, rclass);
+ return !reg_classes_intersect_p (DF_REGS, rclass);
}
}
- return false;
+ return true;
}
/* Return true if registers in machine mode MODE will likely be
Otherwise we will need at most one register per word. */
#define CLASS_MAX_NREGS(CLASS, MODE) \
((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
-
-/* If defined, gives a class of registers that cannot be used as the
- operand of a SUBREG that changes the mode of the object illegally.
- ??? We need to renumber the internal numbers for the frnn registers
- when in little endian in order to allow mode size changes. */
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- sh_cannot_change_mode_class (FROM, TO, CLASS)
\f
/* Stack layout; function entry, exit and calling. */
static unsigned int sparc_hard_regno_nregs (unsigned int, machine_mode);
static bool sparc_hard_regno_mode_ok (unsigned int, machine_mode);
static bool sparc_modes_tieable_p (machine_mode, machine_mode);
-
+static bool sparc_can_change_mode_class (machine_mode, machine_mode,
+ reg_class_t);
\f
#ifdef SUBTARGET_ATTRIBUTE_TABLE
/* Table of valid machine attributes. */
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P sparc_modes_tieable_p
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS sparc_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
/* Return the memory reference contained in X if any, zero otherwise. */
= compound_expr (compound_expr (update_stfsr, update_ldfsr), update_call);
}
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. Borrowed from the PA port.
+
+ SImode loads to floating-point registers are not zero-extended.
+ The definition for LOAD_EXTEND_OP specifies that integer loads
+ narrower than BITS_PER_WORD will be zero-extended. As a result,
+ we inhibit changes from SImode unless they are to a mode that is
+ identical in size.
+
+ Likewise for SFmode, since word-mode paradoxical subregs are
+ problematic on big-endian architectures. */
+
+static bool
+sparc_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
+{
+ if (TARGET_ARCH64
+ && GET_MODE_SIZE (from) == 4
+ && GET_MODE_SIZE (to) != 4)
+ return !reg_classes_intersect_p (rclass, FP_REGS);
+ return true;
+}
+
#include "gt-sparc.h"
#define REGNO_REG_CLASS(REGNO) sparc_regno_reg_class[(REGNO)]
-/* Defines invalid mode changes. Borrowed from the PA port.
-
- SImode loads to floating-point registers are not zero-extended.
- The definition for LOAD_EXTEND_OP specifies that integer loads
- narrower than BITS_PER_WORD will be zero-extended. As a result,
- we inhibit changes from SImode unless they are to a mode that is
- identical in size.
-
- Likewise for SFmode, since word-mode paradoxical subregs are
- problematic on big-endian architectures. */
-
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- (TARGET_ARCH64 \
- && GET_MODE_SIZE (FROM) == 4 \
- && GET_MODE_SIZE (TO) != 4 \
- ? reg_classes_intersect_p (CLASS, FP_REGS) : 0)
-
/* This is the order in which to allocate registers normally.
We put %f0-%f7 last among the float registers, so as to make it more
return (GET_MODE_BITSIZE (mode1) <= MAX_FIXED_MODE_SIZE
&& GET_MODE_BITSIZE (mode2) <= MAX_FIXED_MODE_SIZE);
}
+
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS. GCC assumes that modes are
+ in the lowpart of a register, which is only true for SPU. */
+
+static bool
+spu_can_change_mode_class (machine_mode from, machine_mode to, reg_class_t)
+{
+ return (GET_MODE_SIZE (from) == GET_MODE_SIZE (to)
+ || (GET_MODE_SIZE (from) <= 4 && GET_MODE_SIZE (to) <= 4)
+ || (GET_MODE_SIZE (from) >= 16 && GET_MODE_SIZE (to) >= 16));
+}
\f
/* Table of machine attributes. */
static const struct attribute_spec spu_attribute_table[] =
#undef TARGET_HARD_REGNO_NREGS
#define TARGET_HARD_REGNO_NREGS spu_hard_regno_nregs
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS spu_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
#include "gt-spu.h"
#define INT_REG_OK_FOR_BASE_P(X,STRICT) \
((!(STRICT) || REGNO_OK_FOR_BASE_P (REGNO (X))))
-/* GCC assumes that modes are in the lowpart of a register, which is
- only true for SPU. */
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- ((GET_MODE_SIZE (FROM) > 4 || GET_MODE_SIZE (TO) > 4) \
- && (GET_MODE_SIZE (FROM) < 16 || GET_MODE_SIZE (TO) < 16) \
- && GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO))
-
#define REGISTER_TARGET_PRAGMAS() do { \
c_register_addr_space ("__ea", ADDR_SPACE_EA); \
targetm.resolve_overloaded_builtin = spu_resolve_overloaded_builtin; \
static bool visium_modes_tieable_p (machine_mode, machine_mode);
+static bool visium_can_change_mode_class (machine_mode, machine_mode,
+ reg_class_t);
+
/* Setup the global target hooks structure. */
#undef TARGET_MAX_ANCHOR_OFFSET
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P visium_modes_tieable_p
+#undef TARGET_CAN_CHANGE_MODE_CLASS
+#define TARGET_CAN_CHANGE_MODE_CLASS visium_can_change_mode_class
+
struct gcc_target targetm = TARGET_INITIALIZER;
namespace {
return regno;
}
+/* Implement TARGET_CAN_CHANGE_MODE_CLASS.
+
+ It's not obvious from the documentation of the hook that MDB cannot
+ change mode. However difficulties arise from expressions of the form
+
+ (subreg:SI (reg:DI R_MDB) 0)
+
+ There is no way to convert that reference to a single machine
+ register and, without the following definition, reload will quietly
+ convert it to
+
+ (reg:SI R_MDB). */
+
+static bool
+visium_can_change_mode_class (machine_mode from, machine_mode to,
+ reg_class_t rclass)
+{
+ return (rclass != MDB || GET_MODE_SIZE (from) == GET_MODE_SIZE (to));
+}
+
#include "gt-visium.h"
registers. */
#define PREFERRED_RELOAD_CLASS(X,CLASS) CLASS
-/* `CANNOT_CHANGE_MODE_CLASS (from, to, class)
-
- If defined, a C expression that returns nonzero for a `class' for
- which a change from mode `from' to mode `to' is invalid.
-
- It's not obvious from the above that MDB cannot change mode. However
- difficulties arise from expressions of the form
-
- (subreg:SI (reg:DI R_MDB) 0)
-
- There is no way to convert that reference to a single machine
- register and, without the following definition, reload will quietly
- convert it to
-
- (reg:SI R_MDB) */
-#define CANNOT_CHANGE_MODE_CLASS(FROM,TO,CLASS) \
- (CLASS == MDB ? (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO)) : 0)
-
#define CLASS_MAX_NREGS(CLASS, MODE) \
((CLASS) == MDB ? \
((GET_MODE_SIZE (MODE) + 2 * UNITS_PER_WORD - 1) / (2 * UNITS_PER_WORD)) \
does not guarantee that @samp{(subreg:HI (reg:PSI 0) 0)} has the
value @samp{(reg:HI 4)}.
-@cindex @code{CANNOT_CHANGE_MODE_CLASS} and subreg semantics
+@cindex @code{TARGET_CAN_CHANGE_MODE_CLASS} and subreg semantics
The rules above apply to both pseudo @var{reg}s and hard @var{reg}s.
If the semantics are not correct for particular combinations of
@var{m1}, @var{m2} and hard @var{reg}, the target-specific code
must ensure that those combinations are never used. For example:
@smallexample
-CANNOT_CHANGE_MODE_CLASS (@var{m2}, @var{m1}, @var{class})
+TARGET_CAN_CHANGE_MODE_CLASS (@var{m2}, @var{m1}, @var{class})
@end smallexample
-must be true for every class @var{class} that includes @var{reg}.
+must be false for every class @var{class} that includes @var{reg}.
@findex SUBREG_REG
@findex SUBREG_BYTE
at register number @var{regno}, required to hold a value of mode
@var{mode}. This hook must never return zero, even if a register
cannot hold the requested mode - indicate that with
-@code{TARGET_HARD_REGNO_MODE_OK} and/or @code{CANNOT_CHANGE_MODE_CLASS}
-instead.
+@code{TARGET_HARD_REGNO_MODE_OK} and/or
+@code{TARGET_CAN_CHANGE_MODE_CLASS} instead.
The default definition returns the number of words in @var{mode}.
@end deftypefn
in the reload pass.
@end defmac
-@defmac CANNOT_CHANGE_MODE_CLASS (@var{from}, @var{to}, @var{class})
-If defined, a C expression that returns nonzero for a @var{class} for which
-a change from mode @var{from} to mode @var{to} is invalid.
+@deftypefn {Target Hook} bool TARGET_CAN_CHANGE_MODE_CLASS (machine_mode @var{from}, machine_mode @var{to}, reg_class_t @var{rclass})
+This hook returns true if it is possible to bitcast values held in
+registers of class @var{rclass} from mode @var{from} to mode @var{to}
+and if doing so preserves the low-order bits that are common to both modes.
+The result is only meaningful if @var{rclass} has registers that can hold
+both @code{from} and @code{to}. The default implementation returns true.
-For example, loading 32-bit integer or floating-point objects into
-floating-point registers on Alpha extends them to 64 bits.
-Therefore loading a 64-bit object and then storing it as a 32-bit object
-does not store the low-order 32 bits, as would be the case for a normal
-register. Therefore, @file{alpha.h} defines @code{CANNOT_CHANGE_MODE_CLASS}
-as below:
+As an example of when such bitcasting is invalid, loading 32-bit integer or
+floating-point objects into floating-point registers on Alpha extends them
+to 64 bits. Therefore loading a 64-bit object and then storing it as a
+32-bit object does not store the low-order 32 bits, as would be the case
+for a normal register. Therefore, @file{alpha.h} defines
+@code{TARGET_CAN_CHANGE_MODE_CLASS} to return:
@smallexample
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO) \
- ? reg_classes_intersect_p (FLOAT_REGS, (CLASS)) : 0)
+(GET_MODE_SIZE (from) == GET_MODE_SIZE (to)
+ || !reg_classes_intersect_p (FLOAT_REGS, rclass))
@end smallexample
Even if storing from a register in mode @var{to} would be valid,
-if both @var{from} and @code{raw_reg_mode} for @var{class} are wider
+if both @var{from} and @code{raw_reg_mode} for @var{rclass} are wider
than @code{word_mode}, then we must prevent @var{to} narrowing the
mode. This happens when the middle-end assumes that it can load
or store pieces of an @var{N}-word pseudo, and that the pseudo will
Failure to prevent this kind of mode change will result in the
entire @code{raw_reg_mode} being modified instead of the partial
value that the middle-end intended.
-
-@end defmac
+@end deftypefn
@deftypefn {Target Hook} reg_class_t TARGET_IRA_CHANGE_PSEUDO_ALLOCNO_CLASS (int, @var{reg_class_t}, @var{reg_class_t})
A target hook which can change allocno class for given pseudo from
You may return a non-@code{UNKNOWN} value even if for some hard registers
the sign extension is not performed, if for the @code{REGNO_REG_CLASS}
-of these hard registers @code{CANNOT_CHANGE_MODE_CLASS} returns nonzero
+of these hard registers @code{TARGET_CAN_CHANGE_MODE_CLASS} returns false
when the @var{from} mode is @var{mem_mode} and the @var{to} mode is any
integral mode larger than this but not larger than @code{word_mode}.
You must return @code{UNKNOWN} if for some hard registers that allow this
-mode, @code{CANNOT_CHANGE_MODE_CLASS} says that they cannot change to
+mode, @code{TARGET_CAN_CHANGE_MODE_CLASS} says that they cannot change to
@code{word_mode}, but that they can change to another integral mode that
is larger then @var{mem_mode} but still smaller than @code{word_mode}.
@end defmac
Similarly to @code{LOAD_EXTEND_OP} you may return a non-@code{UNKNOWN}
value even if the extension is not performed on certain hard registers
as long as for the @code{REGNO_REG_CLASS} of these hard registers
-@code{CANNOT_CHANGE_MODE_CLASS} returns nonzero.
+@code{TARGET_CAN_CHANGE_MODE_CLASS} returns false.
Note that @code{TARGET_MODE_REP_EXTENDED} and @code{LOAD_EXTEND_OP}
describe two related properties. If you define
in the reload pass.
@end defmac
-@defmac CANNOT_CHANGE_MODE_CLASS (@var{from}, @var{to}, @var{class})
-If defined, a C expression that returns nonzero for a @var{class} for which
-a change from mode @var{from} to mode @var{to} is invalid.
-
-For example, loading 32-bit integer or floating-point objects into
-floating-point registers on Alpha extends them to 64 bits.
-Therefore loading a 64-bit object and then storing it as a 32-bit object
-does not store the low-order 32 bits, as would be the case for a normal
-register. Therefore, @file{alpha.h} defines @code{CANNOT_CHANGE_MODE_CLASS}
-as below:
-
-@smallexample
-#define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
- (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO) \
- ? reg_classes_intersect_p (FLOAT_REGS, (CLASS)) : 0)
-@end smallexample
-
-Even if storing from a register in mode @var{to} would be valid,
-if both @var{from} and @code{raw_reg_mode} for @var{class} are wider
-than @code{word_mode}, then we must prevent @var{to} narrowing the
-mode. This happens when the middle-end assumes that it can load
-or store pieces of an @var{N}-word pseudo, and that the pseudo will
-eventually be allocated to @var{N} @code{word_mode} hard registers.
-Failure to prevent this kind of mode change will result in the
-entire @code{raw_reg_mode} being modified instead of the partial
-value that the middle-end intended.
-
-@end defmac
+@hook TARGET_CAN_CHANGE_MODE_CLASS
@hook TARGET_IRA_CHANGE_PSEUDO_ALLOCNO_CLASS
You may return a non-@code{UNKNOWN} value even if for some hard registers
the sign extension is not performed, if for the @code{REGNO_REG_CLASS}
-of these hard registers @code{CANNOT_CHANGE_MODE_CLASS} returns nonzero
+of these hard registers @code{TARGET_CAN_CHANGE_MODE_CLASS} returns false
when the @var{from} mode is @var{mem_mode} and the @var{to} mode is any
integral mode larger than this but not larger than @code{word_mode}.
You must return @code{UNKNOWN} if for some hard registers that allow this
-mode, @code{CANNOT_CHANGE_MODE_CLASS} says that they cannot change to
+mode, @code{TARGET_CAN_CHANGE_MODE_CLASS} says that they cannot change to
@code{word_mode}, but that they can change to another integral mode that
is larger then @var{mem_mode} but still smaller than @code{word_mode}.
@end defmac
{
unsigned int regno = REGNO (reg);
-#ifdef CANNOT_CHANGE_MODE_CLASS
if ((COMPLEX_MODE_P (imode) || VECTOR_MODE_P (imode))
&& GET_MODE_INNER (imode) == omode)
;
- else if (REG_CANNOT_CHANGE_MODE_P (regno, imode, omode))
+ else if (!REG_CAN_CHANGE_MODE_P (regno, imode, omode))
return false;
-#endif
return subreg_offset_representable_p (regno, imode, offset, omode);
}
extern const char * reg_class_names[];
-/* Given a hard REGN a FROM mode and a TO mode, return nonzero if
- REGN cannot change modes between the specified modes. */
-#define REG_CANNOT_CHANGE_MODE_P(REGN, FROM, TO) \
- CANNOT_CHANGE_MODE_CLASS (FROM, TO, REGNO_REG_CLASS (REGN))
+/* Given a hard REGN a FROM mode and a TO mode, return true if
+ REGN can change from mode FROM to mode TO. */
+#define REG_CAN_CHANGE_MODE_P(REGN, FROM, TO) \
+ (targetm.can_change_mode_class (FROM, TO, REGNO_REG_CLASS (REGN)))
#endif /* ! GCC_HARD_REG_SET_H */
return false;
}
+/* Generic hook that takes 2 machine_modes and a register class and
+ returns true. */
+bool
+hook_bool_mode_mode_reg_class_t_true (machine_mode, machine_mode, reg_class_t)
+{
+ return true;
+}
+
/* Generic hook that takes a machine_mode and 2 register classes
and returns false. */
bool
extern bool hook_bool_rtx_insn_int_false (rtx_insn *, int);
extern bool hook_bool_uintp_uintp_false (unsigned int *, unsigned int *);
extern bool hook_bool_reg_class_t_false (reg_class_t regclass);
+extern bool hook_bool_mode_mode_reg_class_t_true (machine_mode, machine_mode,
+ reg_class_t);
extern bool hook_bool_mode_reg_class_t_reg_class_t_false (machine_mode,
reg_class_t,
reg_class_t);
&& !REG_P (SET_SRC (set))))
{
if (extend_op != UNKNOWN
-#ifdef CANNOT_CHANGE_MODE_CLASS
- && !CANNOT_CHANGE_MODE_CLASS (GET_MODE (SET_DEST (set)),
- word_mode,
- REGNO_REG_CLASS (REGNO (SET_DEST (set))))
-#endif
- )
+ && REG_CAN_CHANGE_MODE_P (REGNO (SET_DEST (set)),
+ GET_MODE (SET_DEST (set)), word_mode))
{
rtx wide_dest = gen_rtx_REG (word_mode, REGNO (SET_DEST (set)));
ORIGINAL_REGNO (wide_dest) = ORIGINAL_REGNO (SET_DEST (set));
|| GET_CODE (SET_SRC (set)) == ZERO_EXTEND
|| GET_CODE (SET_SRC (set)) == SIGN_EXTEND)
; /* Continue ordinary processing. */
-#ifdef CANNOT_CHANGE_MODE_CLASS
/* If the register cannot change mode to word_mode, it follows that
it cannot have been used in word_mode. */
else if (REG_P (SET_DEST (set))
- && CANNOT_CHANGE_MODE_CLASS (GET_MODE (SET_DEST (set)),
- word_mode,
- REGNO_REG_CLASS (REGNO (SET_DEST (set)))))
+ && !REG_CAN_CHANGE_MODE_P (REGNO (SET_DEST (set)),
+ GET_MODE (SET_DEST (set)),
+ word_mode))
; /* Continue ordinary processing. */
-#endif
/* If this is a straight load, make the extension explicit. */
else if (REG_P (SET_DEST (set))
&& recog_data.n_operands == 2
&& MEM_P (sub))
return 0;
-#ifdef CANNOT_CHANGE_MODE_CLASS
if (REG_P (sub)
&& REGNO (sub) < FIRST_PSEUDO_REGISTER
- && REG_CANNOT_CHANGE_MODE_P (REGNO (sub), GET_MODE (sub), mode)
+ && !REG_CAN_CHANGE_MODE_P (REGNO (sub), GET_MODE (sub), mode)
&& GET_MODE_CLASS (GET_MODE (sub)) != MODE_COMPLEX_INT
&& GET_MODE_CLASS (GET_MODE (sub)) != MODE_COMPLEX_FLOAT
/* LRA can generate some invalid SUBREGS just for matched
valid. */
&& ! LRA_SUBREG_P (op))
return 0;
-#endif
/* FLOAT_MODE subregs can't be paradoxical. Combine will occasionally
create such rtl, and we must reject it. */
if (partial_subreg_p (orig_mode, new_mode))
return false;
-#ifdef CANNOT_CHANGE_MODE_CLASS
- return !REG_CANNOT_CHANGE_MODE_P (regno, orig_mode, new_mode);
-#endif
-
- return true;
+ return REG_CAN_CHANGE_MODE_P (regno, orig_mode, new_mode);
}
/* Register REGNO was originally set in ORIG_MODE. It - or a copy of it -
scalar_int_mode inner_mode;
if (in != 0 && GET_CODE (in) == SUBREG
&& (subreg_lowpart_p (in) || strict_low)
-#ifdef CANNOT_CHANGE_MODE_CLASS
- && !CANNOT_CHANGE_MODE_CLASS (GET_MODE (SUBREG_REG (in)), inmode, rclass)
-#endif
+ && targetm.can_change_mode_class (GET_MODE (SUBREG_REG (in)),
+ inmode, rclass)
&& contains_allocatable_reg_of_mode[rclass][GET_MODE (SUBREG_REG (in))]
&& (CONSTANT_P (SUBREG_REG (in))
|| GET_CODE (SUBREG_REG (in)) == PLUS
&& (secondary_reload_class (1, rclass, GET_MODE (SUBREG_REG (in)),
SUBREG_REG (in))
== NO_REGS))
-#ifdef CANNOT_CHANGE_MODE_CLASS
|| (REG_P (SUBREG_REG (in))
&& REGNO (SUBREG_REG (in)) < FIRST_PSEUDO_REGISTER
- && REG_CANNOT_CHANGE_MODE_P
- (REGNO (SUBREG_REG (in)), GET_MODE (SUBREG_REG (in)), inmode))
-#endif
- ))
+ && !REG_CAN_CHANGE_MODE_P (REGNO (SUBREG_REG (in)),
+ GET_MODE (SUBREG_REG (in)), inmode))))
{
#ifdef LIMIT_RELOAD_CLASS
in_subreg_loc = inloc;
label it input-output.) */
if (out != 0 && GET_CODE (out) == SUBREG
&& (subreg_lowpart_p (out) || strict_low)
-#ifdef CANNOT_CHANGE_MODE_CLASS
- && !CANNOT_CHANGE_MODE_CLASS (GET_MODE (SUBREG_REG (out)), outmode, rclass)
-#endif
+ && targetm.can_change_mode_class (GET_MODE (SUBREG_REG (out)),
+ outmode, rclass)
&& contains_allocatable_reg_of_mode[rclass][GET_MODE (SUBREG_REG (out))]
&& (CONSTANT_P (SUBREG_REG (out))
|| strict_low
&& (secondary_reload_class (0, rclass, GET_MODE (SUBREG_REG (out)),
SUBREG_REG (out))
== NO_REGS))
-#ifdef CANNOT_CHANGE_MODE_CLASS
|| (REG_P (SUBREG_REG (out))
&& REGNO (SUBREG_REG (out)) < FIRST_PSEUDO_REGISTER
- && REG_CANNOT_CHANGE_MODE_P (REGNO (SUBREG_REG (out)),
- GET_MODE (SUBREG_REG (out)),
- outmode))
-#endif
- ))
+ && !REG_CAN_CHANGE_MODE_P (REGNO (SUBREG_REG (out)),
+ GET_MODE (SUBREG_REG (out)),
+ outmode))))
{
#ifdef LIMIT_RELOAD_CLASS
out_subreg_loc = outloc;
&& reg_last_reload_reg[regno] != 0
&& (GET_MODE_SIZE (GET_MODE (reg_last_reload_reg[regno]))
>= GET_MODE_SIZE (mode) + byte)
-#ifdef CANNOT_CHANGE_MODE_CLASS
/* Verify that the register it's in can be used in
mode MODE. */
- && !REG_CANNOT_CHANGE_MODE_P (REGNO (reg_last_reload_reg[regno]),
- GET_MODE (reg_last_reload_reg[regno]),
- mode)
-#endif
- )
+ && (REG_CAN_CHANGE_MODE_P
+ (REGNO (reg_last_reload_reg[regno]),
+ GET_MODE (reg_last_reload_reg[regno]),
+ mode)))
{
enum reg_class rclass = rld[r].rclass, last_class;
rtx last_reg = reg_last_reload_reg[regno];
int src ATTRIBUTE_UNUSED,
machine_mode mode ATTRIBUTE_UNUSED)
{
-#ifdef CANNOT_CHANGE_MODE_CLASS
- return (!REG_CANNOT_CHANGE_MODE_P (dest, mode, reg_raw_mode[dest])
- && !REG_CANNOT_CHANGE_MODE_P (src, mode, reg_raw_mode[src]));
-#else
- return true;
-#endif
+ return (REG_CAN_CHANGE_MODE_P (dest, mode, reg_raw_mode[dest])
+ && REG_CAN_CHANGE_MODE_P (src, mode, reg_raw_mode[src]));
}
/* Output insns to reload values in and out of the chosen reload regs. */
struct subreg_info info;
unsigned int yregno;
-#ifdef CANNOT_CHANGE_MODE_CLASS
/* Give the backend a chance to disallow the mode change. */
if (GET_MODE_CLASS (xmode) != MODE_COMPLEX_INT
&& GET_MODE_CLASS (xmode) != MODE_COMPLEX_FLOAT
- && REG_CANNOT_CHANGE_MODE_P (xregno, xmode, ymode)
+ && !REG_CAN_CHANGE_MODE_P (xregno, xmode, ymode)
/* We can use mode change in LRA for some transformations. */
&& ! lra_in_progress)
return -1;
-#endif
/* We shouldn't simplify stack-related registers. */
if ((!reload_completed || frame_pointer_needed)
HARD_REGNO_CALL_PART_CLOBBERED HARD_REGNO_MODE_OK \
MODES_TIEABLE_P FUNCTION_ARG_PADDING SLOW_UNALIGNED_ACCESS \
HARD_REGNO_NREGS SECONDARY_MEMORY_NEEDED_MODE \
- SECONDARY_MEMORY_NEEDED
+ SECONDARY_MEMORY_NEEDED CANNOT_CHANGE_MODE_CLASS
/* Target macros only used for code built for the target, that have
moved to libgcc-tm.h or have never been present elsewhere. */
Similarly to @code{LOAD_EXTEND_OP} you may return a non-@code{UNKNOWN}\n\
value even if the extension is not performed on certain hard registers\n\
as long as for the @code{REGNO_REG_CLASS} of these hard registers\n\
-@code{CANNOT_CHANGE_MODE_CLASS} returns nonzero.\n\
+@code{TARGET_CAN_CHANGE_MODE_CLASS} returns false.\n\
\n\
Note that @code{TARGET_MODE_REP_EXTENDED} and @code{LOAD_EXTEND_OP}\n\
describe two related properties. If you define\n\
tree, (tree type, tree expr),
hook_tree_tree_tree_null)
+DEFHOOK
+(can_change_mode_class,
+ "This hook returns true if it is possible to bitcast values held in\n\
+registers of class @var{rclass} from mode @var{from} to mode @var{to}\n\
+and if doing so preserves the low-order bits that are common to both modes.\n\
+The result is only meaningful if @var{rclass} has registers that can hold\n\
+both @code{from} and @code{to}. The default implementation returns true.\n\
+\n\
+As an example of when such bitcasting is invalid, loading 32-bit integer or\n\
+floating-point objects into floating-point registers on Alpha extends them\n\
+to 64 bits. Therefore loading a 64-bit object and then storing it as a\n\
+32-bit object does not store the low-order 32 bits, as would be the case\n\
+for a normal register. Therefore, @file{alpha.h} defines\n\
+@code{TARGET_CAN_CHANGE_MODE_CLASS} to return:\n\
+\n\
+@smallexample\n\
+(GET_MODE_SIZE (from) == GET_MODE_SIZE (to)\n\
+ || !reg_classes_intersect_p (FLOAT_REGS, rclass))\n\
+@end smallexample\n\
+\n\
+Even if storing from a register in mode @var{to} would be valid,\n\
+if both @var{from} and @code{raw_reg_mode} for @var{rclass} are wider\n\
+than @code{word_mode}, then we must prevent @var{to} narrowing the\n\
+mode. This happens when the middle-end assumes that it can load\n\
+or store pieces of an @var{N}-word pseudo, and that the pseudo will\n\
+eventually be allocated to @var{N} @code{word_mode} hard registers.\n\
+Failure to prevent this kind of mode change will result in the\n\
+entire @code{raw_reg_mode} being modified instead of the partial\n\
+value that the middle-end intended.",
+ bool, (machine_mode from, machine_mode to, reg_class_t rclass),
+ hook_bool_mode_mode_reg_class_t_true)
+
/* Change pseudo allocno class calculated by IRA. */
DEFHOOK
(ira_change_pseudo_allocno_class,
at register number @var{regno}, required to hold a value of mode\n\
@var{mode}. This hook must never return zero, even if a register\n\
cannot hold the requested mode - indicate that with\n\
-@code{TARGET_HARD_REGNO_MODE_OK} and/or @code{CANNOT_CHANGE_MODE_CLASS}\n\
-instead.\n\
+@code{TARGET_HARD_REGNO_MODE_OK} and/or\n\
+@code{TARGET_CAN_CHANGE_MODE_CLASS} instead.\n\
\n\
The default definition returns the number of words in @var{mode}.",
unsigned int, (unsigned int regno, machine_mode mode),
projects / thirdparty / gcc.git / commitdiff
