- minix,neo-u9h
- nexbox,a1
- tronsmart,vega-s96
+ - ugoos,am3
- videostrong,gxm-kiii-pro
- wetek,core2
- const: amlogic,s912
examples:
- |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
- trbe {
- compatible = "arm,trace-buffer-extension";
- interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
- };
+ trbe {
+ compatible = "arm,trace-buffer-extension";
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
...
- facebook,greatlakes-bmc
- facebook,harma-bmc
- facebook,minerva-cmc
+ - facebook,santabarbara-bmc
- facebook,yosemite4-bmc
- ibm,blueridge-bmc
- ibm,everest-bmc
- inventec,starscream-bmc
- inventec,transformer-bmc
- jabil,rbp-bmc
+ - nvidia,gb200nvl-bmc
- qcom,dc-scm-v1-bmc
- quanta,s6q-bmc
- ufispace,ncplite-bmc
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/axiado.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axiado Platforms
+
+maintainers:
+ - Harshit Shah <hshah@axiado.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: AX3000 based boards
+ items:
+ - enum:
+ - axiado,ax3000-evk # Axiado AX3000 Evaluation Board
+ - const: axiado,ax3000 # Axiado AX3000 SoC
+
+additionalProperties: true
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX platforms
+
+maintainers:
+ - Peter Chen <peter.chen@cixtech.com>
+ - Fugang Duan <fugang.duan@cixtech.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+
+ - description: Radxa Orion O6
+ items:
+ - const: radxa,orion-o6
+ - const: cix,sky1
+
+additionalProperties: true
+
+...
- qcom,kryo385
- qcom,kryo465
- qcom,kryo468
+ - qcom,kryo470
- qcom,kryo485
- qcom,kryo560
- qcom,kryo570
+++ /dev/null
-Freescale Vybrid Miscellaneous System Control - Interrupt Router
-
-The MSCM IP contains multiple sub modules, this binding describes the second
-block of registers which control the interrupt router. The interrupt router
-allows to configure the recipient of each peripheral interrupt. Furthermore
-it controls the directed processor interrupts. The module is available in all
-Vybrid SoC's but is only really useful in dual core configurations (VF6xx
-which comes with a Cortex-A5/Cortex-M4 combination).
-
-Required properties:
-- compatible: "fsl,vf610-mscm-ir"
-- reg: the register range of the MSCM Interrupt Router
-- fsl,cpucfg: The handle to the MSCM CPU configuration node, required
- to get the current CPU ID
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells: Two cells, interrupt number and cells.
- The hardware interrupt number according to interrupt
- assignment of the interrupt router is required.
- Flags get passed only when using GIC as parent. Flags
- encoding as documented by the GIC bindings.
-
-Example:
- mscm_ir: interrupt-controller@40001800 {
- compatible = "fsl,vf610-mscm-ir";
- reg = <0x40001800 0x400>;
- fsl,cpucfg = <&mscm_cpucfg>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&intc>;
- }
- description: i.MX28 based Boards
items:
- enum:
+ - amarula,imx28-rmm
- armadeus,imx28-apf28 # APF28 SoM
- bluegiga,apx4devkit # Bluegiga APx4 SoM on dev board
- crystalfontz,cfa10036 # Crystalfontz CFA-10036 SoM
- const: dh,imx6ull-dhcor-som
- const: fsl,imx6ull
+ - description: i.MX6ULL Engicam MicroGEA SoM based boards
+ items:
+ - enum:
+ - engicam,microgea-imx6ull-bmm # i.MX6ULL Engicam MicroGEA BMM Board
+ - engicam,microgea-imx6ull-gtw # i.MX6ULL Engicam MicroGEA GTW Board
+ - engicam,microgea-imx6ull-rmm # i.MX6ULL Engicam MicroGEA RMM Board
+ - const: engicam,microgea-imx6ull # i.MX6ULL Engicam MicroGEA SoM
+ - const: fsl,imx6ull
+
- description: i.MX6ULL PHYTEC phyBOARD-Segin
items:
- enum:
- gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
- gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
+ - gocontroll,moduline-display # GOcontroll Moduline Display controller
- skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate
- skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
- skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
- fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board
- const: fsl,imx95
+ - description: PHYTEC i.MX 95 FPSC based Boards
+ items:
+ - enum:
+ - phytec,imx95-libra-rdk-fpsc # Libra-i.MX 95 FPSC
+ - const: phytec,imx95-phycore-fpsc # phyCORE-i.MX 95 FPSC
+ - const: fsl,imx95
+
- description: i.MXRT1050 based Boards
items:
- enum:
- enum:
- mediatek,mt2712-evb
- const: mediatek,mt2712
+ - items:
+ - enum:
+ - jty,d101
+ - lenovo,a369i
+ - const: mediatek,mt6572
- items:
- enum:
- mediatek,mt6580-evbp1
- const: google,steelix-sku196608
- const: google,steelix
- const: mediatek,mt8186
+ - description: Google Squirtle (Acer Chromebook Spin 311 (R724T)
+ items:
+ - const: google,squirtle
+ - const: mediatek,mt8186
- description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001))
items:
- const: google,starmie-sku0
- const: mediatek,mt8186
- description: Google Voltorb (Acer Chromebook 311 C723/C732T)
items:
- - enum:
- - google,voltorb-sku589824
- - google,voltorb-sku589825
- const: google,voltorb
- const: mediatek,mt8186
- items:
- enum:
- dell,wyse-ariel
- const: marvell,mmp3
+ - description: PXA1908 based boards
+ items:
+ - enum:
+ - samsung,coreprimevelte
+ - const: marvell,pxa1908
additionalProperties: true
- samsung,hlte
- sony,xperia-amami
- sony,xperia-honami
+ - sony,xperia-togari
- const: qcom,msm8974
- items:
- const: qcom,msm8974pro
- const: qcom,msm8974
+ - items:
+ - enum:
+ - longcheer,l9360
+ - const: qcom,msm8976
+
- items:
- enum:
- acer,a1-724
- const: firefly,rk3566-roc-pc
- const: rockchip,rk3566
+ - description: Firefly Station M3
+ items:
+ - const: firefly,rk3588s-roc-pc
+ - const: rockchip,rk3588s
+
- description: Firefly Station P2
items:
- const: firefly,rk3568-roc-pc
- friendlyarm,nanopi-r4s-enterprise
- const: rockchip,rk3399
+ - description: FriendlyElec NanoPi M5 series boards
+ items:
+ - enum:
+ - friendlyarm,nanopi-m5
+ - const: rockchip,rk3576
+
- description: FriendlyElec NanoPi R5 series boards
items:
- enum:
- const: lckfb,tspi-rk3566
- const: rockchip,rk3566
+ - description: Luckfox Core3576 Module based boards
+ items:
+ - enum:
+ - luckfox,omni3576
+ - const: luckfox,core3576
+ - const: rockchip,rk3576
+
- description: Lunzn FastRhino R66S / R68S
items:
- enum:
- const: radxa,rock-s0
- const: rockchip,rk3308
+ - description: Radxa ROCK 5T
+ items:
+ - const: radxa,rock-5t
+ - const: rockchip,rk3588
+
- description: Radxa ZERO 3W/3E
items:
- enum:
- const: rockchip,rk3588-toybrick-x0
- const: rockchip,rk3588
+ - description: Sakura Pi RK3308B
+ items:
+ - const: sakurapi,rk3308-sakurapi-rk3308b
+ - const: rockchip,rk3308
+
- description: Sinovoip RK3308 Banana Pi P2 Pro
items:
- const: sinovoip,rk3308-bpi-p2pro
- rockchip,rk3288-pmu
- rockchip,rk3368-pmu
- rockchip,rk3399-pmu
+ - rockchip,rk3528-pmu
- rockchip,rk3562-pmu
- rockchip,rk3568-pmu
- rockchip,rk3576-pmu
- rockchip,rk3288-pmu
- rockchip,rk3368-pmu
- rockchip,rk3399-pmu
+ - rockchip,rk3528-pmu
- rockchip,rk3562-pmu
- rockchip,rk3568-pmu
- rockchip,rk3576-pmu
- const: samsung,aries
- const: samsung,s5pv210
+ - description: Exynos2200 based boards
+ items:
+ - enum:
+ - samsung,g0s # Samsung Galaxy S22+ (SM-S906B)
+ - const: samsung,exynos2200
+
- description: Exynos3250 based boards
items:
- enum:
examples:
- |
ahb {
- compatible = "st,mlahb", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- dma-ranges = <0x00000000 0x38000000 0x10000>,
- <0x10000000 0x10000000 0x60000>,
- <0x30000000 0x30000000 0x60000>;
+ compatible = "st,mlahb", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ dma-ranges = <0x00000000 0x38000000 0x10000>,
+ <0x10000000 0x10000000 0x60000>,
+ <0x30000000 0x30000000 0x60000>;
- m4_rproc: m4@10000000 {
- reg = <0x10000000 0x40000>;
- };
+ m4_rproc: m4@10000000 {
+ reg = <0x10000000 0x40000>;
+ };
};
...
- st,stm32mp157a-dk1-scmi
- st,stm32mp157c-dk2
- st,stm32mp157c-dk2-scmi
+ - st,stm32mp157f-dk2
- const: st,stm32mp157
- items:
- const: allwinner,i12-tvbox
- const: allwinner,sun7i-a20
- - description: ICnova A20 ADB4006
+ - description: ICnova A20
items:
- - const: incircuit,icnova-a20-adb4006
- - const: incircuit,icnova-a20
- - const: allwinner,sun7i-a20
-
- - description: ICNova A20 SWAC
- items:
- - const: incircuit,icnova-a20-swac
+ - enum:
+ - incircuit,icnova-a20-adb4006
+ - incircuit,icnova-a20-swac
- const: incircuit,icnova-a20
- const: allwinner,sun7i-a20
- const: pine64,pinebook
- const: allwinner,sun50i-a64
- - description: Pine64 PinePhone Developer Batch (1.0)
- items:
- - const: pine64,pinephone-1.0
- - const: pine64,pinephone
- - const: allwinner,sun50i-a64
-
- - description: Pine64 PinePhone Braveheart (1.1)
+ - description: Pine64 PinePhone
items:
- - const: pine64,pinephone-1.1
- - const: pine64,pinephone
- - const: allwinner,sun50i-a64
-
- - description: Pine64 PinePhone (1.2)
- items:
- - const: pine64,pinephone-1.2
+ - enum:
+ - pine64,pinephone-1.0 # Developer Batch (1.0)
+ - pine64,pinephone-1.1 # Braveheart (1.1)
+ - pine64,pinephone-1.2
- const: pine64,pinephone
- const: allwinner,sun50i-a64
- const: xunlong,orangepi-3
- const: allwinner,sun50i-h6
+ - description: Xunlong OrangePi 4A
+ items:
+ - const: xunlong,orangepi-4a
+ - const: allwinner,sun55i-t527
+
- description: Xunlong OrangePi Lite
items:
- const: xunlong,orangepi-lite
- nvidia,cardhu-a04
- const: nvidia,cardhu
- const: nvidia,tegra30
+ - description: ASUS Portable AiO P1801-T
+ items:
+ - const: asus,p1801-t
+ - const: nvidia,tegra30
- description: ASUS Transformers Device family
items:
- enum:
- asus,tf300tl
- asus,tf700t
- const: nvidia,tegra30
+ - description: Asus VivoTab RT
+ items:
+ - const: asus,tf600t
+ - const: nvidia,tegra30
- description: LG Optimus 4X P880
items:
- const: lg,p880
- const: nvidia,p3768-0000+p3767-0005
- const: nvidia,p3767-0005
- const: nvidia,tegra234
+ - description: NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform
+ items:
+ - const: nvidia,p3971-0089+p3834-0008
+ - const: nvidia,p3834-0008
+ - const: nvidia,tegra264
additionalProperties: true
- nvidia,tegra186-pmc
- nvidia,tegra194-pmc
- nvidia,tegra234-pmc
+ - nvidia,tegra264-pmc
reg:
minItems: 4
- ti,am62a7-sk
- const: ti,am62a7
+ - description: K3 AM62D2 SoC and Boards
+ items:
+ - enum:
+ - ti,am62d2-evm
+ - const: ti,am62d2
+
- description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra
items:
- const: phytec,am62a7-phyboard-lyra-rdk
- compulab,cm-t335
- moxa,uc-8100-me-t
- novatech,am335x-lxm
+ - seeed,am335x-bone-green-eco
- ti,am335x-bone
- ti,am335x-evm
- ti,am3359-icev2
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,imx8mp-aipstz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Secure AHB to IP Slave bus (AIPSTZ) bridge
+
+description:
+ The secure AIPS bridge (AIPSTZ) acts as a bridge for AHB masters issuing
+ transactions to IP Slave peripherals. Additionally, this module offers access
+ control configurations meant to restrict which peripherals a master can
+ access.
+
+maintainers:
+ - Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8mp-aipstz
+
+ reg:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ "#access-controller-cells":
+ const: 3
+ description:
+ First cell - consumer ID
+ Second cell - consumer type (master or peripheral)
+ Third cell - configuration value
+
+ ranges: true
+
+# borrowed from simple-bus.yaml, no additional requirements for children
+patternProperties:
+ "@(0|[1-9a-f][0-9a-f]*)$":
+ type: object
+ additionalProperties: true
+ properties:
+ reg:
+ items:
+ minItems: 2
+ maxItems: 4
+ minItems: 1
+ maxItems: 1024
+ ranges:
+ oneOf:
+ - items:
+ minItems: 3
+ maxItems: 7
+ minItems: 1
+ maxItems: 1024
+ - $ref: /schemas/types.yaml#/definitions/flag
+ anyOf:
+ - required:
+ - reg
+ - required:
+ - ranges
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - "#address-cells"
+ - "#size-cells"
+ - "#access-controller-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus@30df0000 {
+ compatible = "fsl,imx8mp-aipstz";
+ reg = <0x30df0000 0x10000>;
+ ranges = <0x30c00000 0x30c00000 0x400000>;
+ power-domains = <&pgc_audio>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #access-controller-cells = <3>;
+
+ dma-controller@30e00000 {
+ compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+ reg = <0x30e00000 0x10000>;
+ #dma-cells = <3>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>,
+ <&clk IMX8MP_CLK_AUDIO_ROOT>;
+ clock-names = "ipg", "ahb";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+ };
clock-names = "msi", "ahb";
power-domains = <&pd IMX_SC_R_DC_0>;
- syscon@56221000 {
- compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+ bus@56221000 {
+ compatible = "simple-pm-bus", "syscon";
reg = <0x56221000 0x1000>;
clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
clock-names = "ipg";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
pxl2dpi {
compatible = "fsl,imx8qxp-pxl2dpi";
+++ /dev/null
-Alphascale Clock Controller
-
-The ACC (Alphascale Clock Controller) is responsible for choosing proper
-clock source, setting dividers and clock gates.
-
-Required properties for the ACC node:
- - compatible: must be "alphascale,asm9260-clock-controller"
- - reg: must contain the ACC register base and size
- - #clock-cells : shall be set to 1.
-
-Simple one-cell clock specifier format is used, where the only cell is used
-as an index of the clock inside the provider.
-It is encouraged to use dt-binding for clock index definitions. SoC specific
-dt-binding should be included to the device tree descriptor. For example
-Alphascale ASM9260:
-#include <dt-bindings/clock/alphascale,asm9260.h>
-
-This binding contains two types of clock providers:
- _AHB_ - AHB gate;
- _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
-All clock specific details can be found in the SoC documentation.
-CLKID_AHB_ROM 0
-CLKID_AHB_RAM 1
-CLKID_AHB_GPIO 2
-CLKID_AHB_MAC 3
-CLKID_AHB_EMI 4
-CLKID_AHB_USB0 5
-CLKID_AHB_USB1 6
-CLKID_AHB_DMA0 7
-CLKID_AHB_DMA1 8
-CLKID_AHB_UART0 9
-CLKID_AHB_UART1 10
-CLKID_AHB_UART2 11
-CLKID_AHB_UART3 12
-CLKID_AHB_UART4 13
-CLKID_AHB_UART5 14
-CLKID_AHB_UART6 15
-CLKID_AHB_UART7 16
-CLKID_AHB_UART8 17
-CLKID_AHB_UART9 18
-CLKID_AHB_I2S0 19
-CLKID_AHB_I2C0 20
-CLKID_AHB_I2C1 21
-CLKID_AHB_SSP0 22
-CLKID_AHB_IOCONFIG 23
-CLKID_AHB_WDT 24
-CLKID_AHB_CAN0 25
-CLKID_AHB_CAN1 26
-CLKID_AHB_MPWM 27
-CLKID_AHB_SPI0 28
-CLKID_AHB_SPI1 29
-CLKID_AHB_QEI 30
-CLKID_AHB_QUADSPI0 31
-CLKID_AHB_CAMIF 32
-CLKID_AHB_LCDIF 33
-CLKID_AHB_TIMER0 34
-CLKID_AHB_TIMER1 35
-CLKID_AHB_TIMER2 36
-CLKID_AHB_TIMER3 37
-CLKID_AHB_IRQ 38
-CLKID_AHB_RTC 39
-CLKID_AHB_NAND 40
-CLKID_AHB_ADC0 41
-CLKID_AHB_LED 42
-CLKID_AHB_DAC0 43
-CLKID_AHB_LCD 44
-CLKID_AHB_I2S1 45
-CLKID_AHB_MAC1 46
-
-CLKID_SYS_CPU 47
-CLKID_SYS_AHB 48
-CLKID_SYS_I2S0M 49
-CLKID_SYS_I2S0S 50
-CLKID_SYS_I2S1M 51
-CLKID_SYS_I2S1S 52
-CLKID_SYS_UART0 53
-CLKID_SYS_UART1 54
-CLKID_SYS_UART2 55
-CLKID_SYS_UART3 56
-CLKID_SYS_UART4 56
-CLKID_SYS_UART5 57
-CLKID_SYS_UART6 58
-CLKID_SYS_UART7 59
-CLKID_SYS_UART8 60
-CLKID_SYS_UART9 61
-CLKID_SYS_SPI0 62
-CLKID_SYS_SPI1 63
-CLKID_SYS_QUADSPI 64
-CLKID_SYS_SSP0 65
-CLKID_SYS_NAND 66
-CLKID_SYS_TRACE 67
-CLKID_SYS_CAMM 68
-CLKID_SYS_WDT 69
-CLKID_SYS_CLKOUT 70
-CLKID_SYS_MAC 71
-CLKID_SYS_LCD 72
-CLKID_SYS_ADCANA 73
-
-Example of clock consumer with _SYS_ and _AHB_ sinks.
-uart4: serial@80010000 {
- compatible = "alphascale,asm9260-uart";
- reg = <0x80010000 0x4000>;
- clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
- interrupts = <19>;
-};
-
-Clock consumer with only one, _AHB_ sink.
-timer0: timer@80088000 {
- compatible = "alphascale,asm9260-timer";
- reg = <0x80088000 0x4000>;
- clocks = <&acc CLKID_AHB_TIMER0>;
- interrupts = <29>;
-};
-
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/alphascale,asm9260-clock-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alphascale Clock Controller
+
+maintainers:
+ - Oleksij Rempel <linux@rempel-privat.de>
+
+description: |
+ The ACC (Alphascale Clock Controller) is responsible for choosing proper
+ clock source, setting dividers and clock gates.
+
+ Simple one-cell clock specifier format is used, where the only cell is used
+ as an index of the clock inside the provider.
+ It is encouraged to use dt-binding for clock index definitions. SoC specific
+ dt-binding should be included to the device tree descriptor. For example
+ Alphascale ASM9260:
+
+ #include <dt-bindings/clock/alphascale,asm9260.h>
+
+ This binding contains two types of clock providers:
+
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+
+ All clock specific details can be found in the SoC documentation.
+
+properties:
+ compatible:
+ const: alphascale,asm9260-clock-controller
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apm,xgene-device-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC device clocks
+
+maintainers:
+ - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+ compatible:
+ const: apm,xgene-device-clock
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ reg-names:
+ items:
+ - enum: [ csr-reg, div-reg ]
+ - const: div-reg
+ minItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clock-output-names:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ csr-offset:
+ description: Offset to the CSR reset register
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ csr-mask:
+ description: CSR reset mask bit
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0xf
+
+ enable-offset:
+ description: Offset to the enable register
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 8
+
+ enable-mask:
+ description: CSR enable mask bit
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0xf
+
+ divider-offset:
+ description: Offset to the divider register
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ divider-width:
+ description: Width of the divider register
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ divider-shift:
+ description: Bit shift of the divider register
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-output-names
+
+additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apm,xgene-socpll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC PLL, PCPPLL, and PMD clocks
+
+maintainers:
+ - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apm,xgene-pcppll-clock
+ - apm,xgene-pcppll-v2-clock
+ - apm,xgene-pmd-clock
+ - apm,xgene-socpll-clock
+ - apm,xgene-socpll-v2-clock
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - enum: [ csr-reg, div-reg ]
+ - const: div-reg
+ minItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ enum: [ pcppll, socpll ]
+
+ "#clock-cells":
+ const: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-output-names
+
+additionalProperties: false
+++ /dev/null
-* Peripheral Clock bindings for Marvell Armada 37xx SoCs
-
-Marvell Armada 37xx SoCs provide peripheral clocks which are
-used as clock source for the peripheral of the SoC.
-
-There are two different blocks associated to north bridge and south
-bridge.
-
-The peripheral clock consumer should specify the desired clock by
-having the clock ID in its "clocks" phandle cell.
-
-The following is a list of provided IDs for Armada 3700 North bridge clocks:
-ID Clock name Description
------------------------------------
-0 mmc MMC controller
-1 sata_host Sata Host
-2 sec_at Security AT
-3 sac_dap Security DAP
-4 tsecm Security Engine
-5 setm_tmx Serial Embedded Trace Module
-6 avs Adaptive Voltage Scaling
-7 sqf SPI
-8 pwm PWM
-9 i2c_2 I2C 2
-10 i2c_1 I2C 1
-11 ddr_phy DDR PHY
-12 ddr_fclk DDR F clock
-13 trace Trace
-14 counter Counter
-15 eip97 EIP 97
-16 cpu CPU
-
-The following is a list of provided IDs for Armada 3700 South bridge clocks:
-ID Clock name Description
------------------------------------
-0 gbe-50 50 MHz parent clock for Gigabit Ethernet
-1 gbe-core parent clock for Gigabit Ethernet core
-2 gbe-125 125 MHz parent clock for Gigabit Ethernet
-3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1
-4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0
-5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1
-6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0
-7 gbe1-core Gigabit Ethernet core port 1
-8 gbe0-core Gigabit Ethernet core port 0
-9 gbe-bm Gigabit Ethernet Buffer Manager
-10 sdio SDIO
-11 usb32-sub2-sys USB 2 clock
-12 usb32-ss-sys USB 3 clock
-13 pcie PCIe controller
-
-Required properties:
-
-- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the
- north bridge block, or
- "marvell,armada-3700-periph-clock-sb" for the south bridge block
-- reg : must be the register address of North/South Bridge Clock register
-- #clock-cells : from common clock binding; shall be set to 1
-
-- clocks : list of the parent clock phandle in the following order:
- TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock.
-
-
-Example:
-
-nb_perih_clk: nb-periph-clk@13000{
- compatible = "marvell,armada-3700-periph-clock-nb";
- reg = <0x13000 0x1000>;
- clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
- <&tbg 3>, <&xtalclk>;
- #clock-cells = <1>;
-};
+++ /dev/null
-* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs
-
-Marvell Armada 37xx SoCs provide Time Base Generator clocks which are
-used as parent clocks for the peripheral clocks.
-
-The TBG clock consumer should specify the desired clock by having the
-clock ID in its "clocks" phandle cell.
-
-The following is a list of provided IDs and clock names on Armada 3700:
- 0 = TBG A P
- 1 = TBG B P
- 2 = TBG A S
- 3 = TBG B S
-
-Required properties:
-- compatible : shall be "marvell,armada-3700-tbg-clock"
-- reg : must be the register address of North Bridge PLL register
-- #clock-cells : from common clock binding; shall be set to 1
-
-Example:
-
-tbg: tbg@13200 {
- compatible = "marvell,armada-3700-tbg-clock";
- reg = <0x13200 0x1000>;
- clocks = <&xtalclk>;
- #clock-cells = <1>;
-};
+++ /dev/null
-* Clock bindings for Axis ARTPEC-6 chip
-
-The bindings are based on the clock provider binding in
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-External clocks:
-----------------
-
-There are two external inputs to the main clock controller which should be
-provided using the common clock bindings.
-- "sys_refclk": External 50 Mhz oscillator (required)
-- "i2s_refclk": Alternate audio reference clock (optional).
-
-Main clock controller
----------------------
-
-Required properties:
-- #clock-cells: Should be <1>
- See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers.
-- compatible: Should be "axis,artpec6-clkctrl"
-- reg: Must contain the base address and length of the system controller
-- clocks: Must contain a phandle entry for each clock in clock-names
-- clock-names: Must include the external oscillator ("sys_refclk"). Optional
- ones are the audio reference clock ("i2s_refclk") and the audio fractional
- dividers ("frac_clk0" and "frac_clk1").
-
-Examples:
-
-ext_clk: ext_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
-};
-
-clkctrl: clkctrl@f8000000 {
- #clock-cells = <1>;
- compatible = "axis,artpec6-clkctrl";
- reg = <0xf8000000 0x48>;
- clocks = <&ext_clk>;
- clock-names = "sys_refclk";
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/axis,artpec6-clkctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC-6 clock controller
+
+maintainers:
+ - Lars Persson <lars.persson@axis.com>
+
+properties:
+ compatible:
+ const: axis,artpec6-clkctrl
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: external 50 MHz oscillator.
+ - description: optional audio reference clock.
+ - description: fractional audio clock divider 0.
+ - description: fractional audio clock divider 1.
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: sys_refclk
+ - const: i2s_refclk
+ - const: frac_clk0
+ - const: frac_clk1
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@f8000000 {
+ compatible = "axis,artpec6-clkctrl";
+ reg = <0xf8000000 0x48>;
+ #clock-cells = <1>;
+ clocks = <&ext_clk>;
+ clock-names = "sys_refclk";
+ };
+++ /dev/null
-Broadcom BCM2835 CPRMAN clocks
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CPRMAN clock controller generates clocks in the audio power domain
-of the BCM2835. There is a level of PLLs deriving from an external
-oscillator, a level of PLL dividers that produce channels off of the
-few PLLs, and a level of mostly-generic clock generators sourcing from
-the PLL channels. Most other hardware components source from the
-clock generators, but a few (like the ARM or HDMI) will source from
-the PLL dividers directly.
-
-Required properties:
-- compatible: should be one of the following,
- "brcm,bcm2711-cprman"
- "brcm,bcm2835-cprman"
-- #clock-cells: Should be <1>. The permitted clock-specifier values can be
- found in include/dt-bindings/clock/bcm2835.h
-- reg: Specifies base physical address and size of the registers
-- clocks: phandles to the parent clocks used as input to the module, in
- the following order:
-
- - External oscillator
- - DSI0 byte clock
- - DSI0 DDR2 clock
- - DSI0 DDR clock
- - DSI1 byte clock
- - DSI1 DDR2 clock
- - DSI1 DDR clock
-
- Only external oscillator is required. The DSI clocks may
- not be present, in which case their children will be
- unusable.
-
-Example:
-
- clk_osc: clock@3 {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-output-names = "osc";
- clock-frequency = <19200000>;
- };
-
- clocks: cprman@7e101000 {
- compatible = "brcm,bcm2835-cprman";
- #clock-cells = <1>;
- reg = <0x7e101000 0x2000>;
- clocks = <&clk_osc>;
- };
-
- i2c0: i2c@7e205000 {
- compatible = "brcm,bcm2835-i2c";
- reg = <0x7e205000 0x1000>;
- interrupts = <2 21>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2835-cprman.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 CPRMAN clocks
+
+maintainers:
+ - Stefan Wahren <wahrenst@gmx.net>
+ - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+ The CPRMAN clock controller generates clocks in the audio power domain of the
+ BCM2835. There is a level of PLLs deriving from an external oscillator, a
+ level of PLL dividers that produce channels off of the few PLLs, and a level
+ of mostly-generic clock generators sourcing from the PLL channels. Most other
+ hardware components source from the clock generators, but a few (like the ARM
+ or HDMI) will source from the PLL dividers directly.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2711-cprman
+ - brcm,bcm2835-cprman
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: External oscillator clock.
+ - description: DSI0 byte clock.
+ - description: DSI0 DDR2 clock.
+ - description: DSI0 DDR clock.
+ - description: DSI1 byte clock.
+ - description: DSI1 DDR2 clock.
+ - description: DSI1 DDR clock.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - '#clock-cells'
+ - reg
+ - clocks
+
+examples:
+ - |
+ clock-controller@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ reg = <0x7e101000 0x2000>;
+ #clock-cells = <1>;
+ clocks = <&clk_osc>;
+ };
+++ /dev/null
-Broadcom BCM53573 ILP clock
-===========================
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-This binding is used for ILP clock (sometimes referred as "slow clock")
-on Broadcom BCM53573 devices using Cortex-A7 CPU.
-
-ILP's rate has to be calculated on runtime and it depends on ALP clock
-which has to be referenced.
-
-This clock is part of PMU (Power Management Unit), a Broadcom's device
-handing power-related aspects. Its node must be sub-node of the PMU
-device.
-
-Required properties:
-- compatible: "brcm,bcm53573-ilp"
-- clocks: has to reference an ALP clock
-- #clock-cells: should be <0>
-- clock-output-names: from common clock bindings, should contain clock
- name
-
-Example:
-
-pmu@18012000 {
- compatible = "simple-mfd", "syscon";
- reg = <0x18012000 0x00001000>;
-
- ilp {
- compatible = "brcm,bcm53573-ilp";
- clocks = <&alp>;
- #clock-cells = <0>;
- clock-output-names = "ilp";
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm53573-ilp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53573 ILP clock
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description: >
+ ILP clock (sometimes referred as "slow clock") on Broadcom BCM53573 devices
+ using Cortex-A7 CPU.
+
+ ILP's rate has to be calculated on runtime and it depends on ALP clock which
+ has to be referenced.
+
+ This clock is part of PMU (Power Management Unit), a Broadcom device handling
+ power-related aspects. Its node must be sub-node of the PMU device.
+
+properties:
+ compatible:
+ items:
+ - const: brcm,bcm53573-ilp
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 0
+
+ clock-output-names:
+ items:
+ - const: ilp
+
+additionalProperties: false
+
+examples:
+ - |
+ ilp {
+ compatible = "brcm,bcm53573-ilp";
+ clocks = <&alp>;
+ #clock-cells = <0>;
+ clock-output-names = "ilp";
+ };
+++ /dev/null
-Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
-
-Required properties:
-- compatible: must be one of:
- "brcm,bcm3368-clocks"
- "brcm,bcm6318-clocks"
- "brcm,bcm6318-ubus-clocks"
- "brcm,bcm6328-clocks"
- "brcm,bcm6358-clocks"
- "brcm,bcm6362-clocks"
- "brcm,bcm6368-clocks"
- "brcm,bcm63268-clocks"
-
-- reg: Address and length of the register set
-- #clock-cells: must be <1>
-
-
-Example:
-
-clkctl: clock-controller@10000004 {
- compatible = "brcm,bcm6328-clocks";
- reg = <0x10000004 0x4>;
- #clock-cells = <1>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm63xx-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS based BCM63XX SoCs Gated Clock Controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm3368-clocks
+ - brcm,bcm6318-clocks
+ - brcm,bcm6318-ubus-clocks
+ - brcm,bcm6328-clocks
+ - brcm,bcm6358-clocks
+ - brcm,bcm6362-clocks
+ - brcm,bcm6368-clocks
+ - brcm,bcm63268-clocks
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@10000004 {
+ compatible = "brcm,bcm6328-clocks";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,ep7209-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CLPS711X Clock Controller
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+description:
+ See include/dt-bindings/clock/clps711x-clock.h for the full list of CLPS711X
+ clock IDs.
+
+properties:
+ compatible:
+ items:
+ - const: cirrus,ep7312-clk
+ - const: cirrus,ep7209-clk
+
+ reg:
+ maxItems: 1
+
+ startup-frequency:
+ description: Factory set CPU startup frequency in HZ.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - startup-frequency
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@80000000 {
+ compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
+ reg = <0x80000000 0xc000>;
+ #clock-cells = <1>;
+ startup-frequency = <73728000>;
+ };
+++ /dev/null
-* Clock bindings for the Cirrus Logic CLPS711X CPUs
-
-Required properties:
-- compatible : Shall contain "cirrus,ep7209-clk".
-- reg : Address of the internal register set.
-- startup-frequency: Factory set CPU startup frequency in HZ.
-- #clock-cells : Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
-for the full list of CLPS711X clock IDs.
-
-Example:
- clks: clks@80000000 {
- #clock-cells = <1>;
- compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
- reg = <0x80000000 0xc000>;
- startup-frequency = <73728000>;
- };
+++ /dev/null
-PLL divider based Dove clocks
-
-Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
-high speed clocks for a number of peripherals. These dividers are part of
-the PMU, and thus this node should be a child of the PMU node.
-
-The following clocks are provided:
-
-ID Clock
--------------
-0 AXI bus clock
-1 GPU clock
-2 VMeta clock
-3 LCD clock
-
-Required properties:
-- compatible : shall be "marvell,dove-divider-clock"
-- reg : shall be the register address of the Core PLL and Clock Divider
- Control 0 register. This will cover that register, as well as the
- Core PLL and Clock Divider Control 1 register. Thus, it will have
- a size of 8.
-- #clock-cells : from common clock binding; shall be set to 1
-
-divider_clk: core-clock@64 {
- compatible = "marvell,dove-divider-clock";
- reg = <0x0064 0x8>;
- #clock-cells = <1>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/img,pistachio-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies Pistachio SoC clock controllers
+
+maintainers:
+ - Andrew Bresticker <abrestic@chromium.org>
+
+description: |
+ Pistachio has four clock controllers (core clock, peripheral clock, peripheral
+ general control, and top general control) which are instantiated individually
+ from the device-tree.
+
+ Core clock controller:
+
+ The core clock controller generates clocks for the CPU, RPU (WiFi + BT
+ co-processor), audio, and several peripherals.
+
+ Peripheral clock controller:
+
+ The peripheral clock controller generates clocks for the DDR, ROM, and other
+ peripherals. The peripheral system clock ("periph_sys") generated by the core
+ clock controller is the input clock to the peripheral clock controller.
+
+ Peripheral general control:
+
+ The peripheral general control block generates system interface clocks and
+ resets for various peripherals. It also contains miscellaneous peripheral
+ control registers.
+
+ Top-level general control:
+
+ The top-level general control block contains miscellaneous control registers
+ and gates for the external clocks "audio_clk_in" and "enet_clk_in".
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - img,pistachio-clk
+ - img,pistachio-clk-periph
+ - img,pistachio-cr-periph
+ - img,pistachio-cr-top
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: img,pistachio-clk
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External 52Mhz oscillator
+ - description: Alternate audio reference clock
+ - description: Alternate ethernet PHY clock
+
+ clock-names:
+ items:
+ - const: xtal
+ - const: audio_refclk_ext_gate
+ - const: ext_enet_in_gate
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: img,pistachio-clk-periph
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Peripheral system clock
+
+ clock-names:
+ items:
+ - const: periph_sys_core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: img,pistachio-cr-periph
+ then:
+ properties:
+ clocks:
+ items:
+ - description: System interface clock
+
+ clock-names:
+ items:
+ - const: sys
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: img,pistachio-cr-top
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External audio reference clock
+ - description: External ethernet PHY clock
+
+ clock-names:
+ items:
+ - const: audio_clk_in
+ - const: enet_clk_in
+
+additionalProperties: false
+++ /dev/null
-* NXP LPC1850 Clock Control Unit (CCU)
-
-Each CGU base clock has several clock branches which can be turned on
-or off independently by the Clock Control Units CCU1 or CCU2. The
-branch clocks are distributed between CCU1 and CCU2.
-
- - Above text taken from NXP LPC1850 User Manual.
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
- Should be "nxp,lpc1850-ccu"
-- reg:
- Shall define the base and range of the address space
- containing clock control registers
-- #clock-cells:
- Shall have value <1>. The permitted clock-specifier values
- are the branch clock names defined in table below.
-- clocks:
- Shall contain a list of phandles for the base clocks routed
- from the CGU to the specific CCU. See mapping of base clocks
- and CCU in table below.
-- clock-names:
- Shall contain a list of names for the base clock routed
- from the CGU to the specific CCU. Valid CCU clock names:
- "base_usb0_clk", "base_periph_clk", "base_usb1_clk",
- "base_cpu_clk", "base_spifi_clk", "base_spi_clk",
- "base_apb1_clk", "base_apb3_clk", "base_adchs_clk",
- "base_sdio_clk", "base_ssp0_clk", "base_ssp1_clk",
- "base_uart0_clk", "base_uart1_clk", "base_uart2_clk",
- "base_uart3_clk", "base_audio_clk"
-
-Which branch clocks that are available on the CCU depends on the
-specific LPC part. Check the user manual for your specific part.
-
-A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
-
-Example board file:
-
-soc {
- ccu1: clock-controller@40051000 {
- compatible = "nxp,lpc1850-ccu";
- reg = <0x40051000 0x1000>;
- #clock-cells = <1>;
- clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
- <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
- <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
- <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
- clock-names = "base_apb3_clk", "base_apb1_clk",
- "base_spifi_clk", "base_cpu_clk",
- "base_periph_clk", "base_usb0_clk",
- "base_usb1_clk", "base_spi_clk";
- };
-
- ccu2: clock-controller@40052000 {
- compatible = "nxp,lpc1850-ccu";
- reg = <0x40052000 0x1000>;
- #clock-cells = <1>;
- clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
- <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
- <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
- <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>;
- clock-names = "base_audio_clk", "base_uart3_clk",
- "base_uart2_clk", "base_uart1_clk",
- "base_uart0_clk", "base_ssp1_clk",
- "base_ssp0_clk", "base_sdio_clk";
- };
-
- /* A user of CCU branch clocks */
- uart1: serial@40082000 {
- ...
- clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
- ...
- };
-};
+++ /dev/null
-* NXP LPC1850 Clock Generation Unit (CGU)
-
-The CGU generates multiple independent clocks for the core and the
-peripheral blocks of the LPC18xx. Each independent clock is called
-a base clock and itself is one of the inputs to the two Clock
-Control Units (CCUs) which control the branch clocks to the
-individual peripherals.
-
-The CGU selects the inputs to the clock generators from multiple
-clock sources, controls the clock generation, and routes the outputs
-of the clock generators through the clock source bus to the output
-stages. Each output stage provides an independent clock source and
-corresponds to one of the base clocks for the LPC18xx.
-
- - Above text taken from NXP LPC1850 User Manual.
-
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
- Should be "nxp,lpc1850-cgu"
-- reg:
- Shall define the base and range of the address space
- containing clock control registers
-- #clock-cells:
- Shall have value <1>. The permitted clock-specifier values
- are the base clock numbers defined below.
-- clocks:
- Shall contain a list of phandles for the external input
- sources to the CGU. The list shall be in the following
- order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin.
-- clock-indices:
- Shall be an ordered list of numbers defining the base clock
- number provided by the CGU.
-- clock-output-names:
- Shall be an ordered list of strings defining the names of
- the clocks provided by the CGU.
-
-Which base clocks that are available on the CGU depends on the
-specific LPC part. Base clocks are numbered from 0 to 27.
-
-Number: Name: Description:
- 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT
- 1 BASE_USB0_CLK Base clock for USB0
- 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem,
- SPI, and SGPIO
- 3 BASE_USB1_CLK Base clock for USB1
- 4 BASE_CPU_CLK System base clock for ARM Cortex-M core
- and APB peripheral blocks #0 and #2
- 5 BASE_SPIFI_CLK Base clock for SPIFI
- 6 BASE_SPI_CLK Base clock for SPI
- 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock
- 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock
- 9 BASE_APB1_CLK Base clock for APB peripheral block # 1
-10 BASE_APB3_CLK Base clock for APB peripheral block # 3
-11 BASE_LCD_CLK Base clock for LCD
-12 BASE_ADCHS_CLK Base clock for ADCHS
-13 BASE_SDIO_CLK Base clock for SD/MMC
-14 BASE_SSP0_CLK Base clock for SSP0
-15 BASE_SSP1_CLK Base clock for SSP1
-16 BASE_UART0_CLK Base clock for UART0
-17 BASE_UART1_CLK Base clock for UART1
-18 BASE_UART2_CLK Base clock for UART2
-19 BASE_UART3_CLK Base clock for UART3
-20 BASE_OUT_CLK Base clock for CLKOUT pin
-24-21 - Reserved
-25 BASE_AUDIO_CLK Base clock for audio system (I2S)
-26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output
-27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output
-
-BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
-BASE_ADCHS_CLK is only available on LPC4370.
-
-
-Example board file:
-
-/ {
- clocks {
- xtal: xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <12000000>;
- };
-
- xtal32: xtal32 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-
- enet_rx_clk: enet_rx_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "enet_rx_clk";
- };
-
- enet_tx_clk: enet_tx_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "enet_tx_clk";
- };
-
- gp_clkin: gp_clkin {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "gp_clkin";
- };
- };
-
- soc {
- cgu: clock-controller@40050000 {
- compatible = "nxp,lpc1850-cgu";
- reg = <0x40050000 0x1000>;
- #clock-cells = <1>;
- clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
- };
-
- /* A CGU and CCU clock consumer */
- lcdc: lcdc@40008000 {
- ...
- clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
- clock-names = "clcdclk", "apb_pclk";
- ...
- };
- };
-};
+++ /dev/null
-* NXP LPC1850 CREG clocks
-
-The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
-control registers for two low speed clocks. One of the clocks is a
-32 kHz oscillator driver with power up/down and clock gating. Next
-is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
-
-These clocks are used by the RTC and the Event Router peripherals.
-The 32 kHz can also be routed to other peripherals to enable low
-power modes.
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible:
- Should be "nxp,lpc1850-creg-clk"
-- #clock-cells:
- Shall have value <1>.
-- clocks:
- Shall contain a phandle to the fixed 32 kHz crystal.
-
-The creg-clk node must be a child of the creg syscon node.
-
-The following clocks are available from the clock node.
-
-Clock ID Name
- 0 1 kHz clock
- 1 32 kHz Oscillator
-
-Example:
-soc {
- creg: syscon@40043000 {
- compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
- reg = <0x40043000 0x1000>;
-
- creg_clk: clock-controller {
- compatible = "nxp,lpc1850-creg-clk";
- clocks = <&xtal32>;
- #clock-cells = <1>;
- };
-
- ...
- };
-
- rtc: rtc@40046000 {
- ...
- clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
- clock-names = "rtc", "reg";
- ...
- };
-};
+++ /dev/null
-AXM5516 clock driver bindings
------------------------------
-
-Required properties :
-- compatible : shall contain "lsi,axm5516-clks"
-- reg : shall contain base register location and length
-- #clock-cells : shall contain 1
-
-The consumer specifies the desired clock by having the clock ID in its "clocks"
-phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
-supported clock IDs.
-
-Example:
-
- clks: clock-controller@2010020000 {
- compatible = "lsi,axm5516-clks";
- #clock-cells = <1>;
- reg = <0x20 0x10020000 0 0x20000>;
- };
-
- serial0: uart@2010080000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x20 0x10080000 0 0x1000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks AXXIA_CLK_PER>;
- clock-names = "apb_pclk";
- };
- };
-
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 LSI
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/lsi,axm5516-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LSI AXM5516 Clock Controller
+
+maintainers:
+ - Anders Berg <anders.berg@lsi.com>
+
+description:
+ See <dt-bindings/clock/lsi,axxia-clock.h> for the list of supported clock IDs.
+
+properties:
+ compatible:
+ const: lsi,axm5516-clks
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-controller@2010020000 {
+ compatible = "lsi,axm5516-clks";
+ #clock-cells = <1>;
+ reg = <0x20 0x10020000 0x20000>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/lsi,nspire-cx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Clocks
+
+maintainers:
+ - Daniel Tang <dt.tangr@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - lsi,nspire-cx-ahb-divider
+ - lsi,nspire-classic-ahb-divider
+ - lsi,nspire-cx-clock
+ - lsi,nspire-classic-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 0
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/marvell,armada-370-corediv-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU Core Divider Clock
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - marvell,armada-370-corediv-clock
+ - marvell,armada-375-corediv-clock
+ - marvell,armada-380-corediv-clock
+ - marvell,mv98dx3236-corediv-clock
+ - items:
+ - const: marvell,armada-390-corediv-clock
+ - const: marvell,armada-380-corediv-clock
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@18740 {
+ compatible = "marvell,armada-370-corediv-clock";
+ reg = <0x18740 0xc>;
+ #clock-cells = <1>;
+ clocks = <&pll>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-periph-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx SoCs Peripheral Clocks
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+ Marvell Armada 37xx SoCs provide peripheral clocks which are used as clock
+ source for the peripheral of the SoC.
+
+ There are two different blocks associated to north bridge and south bridge.
+
+ The following is a list of provided IDs for Armada 3700 North bridge clocks:
+
+ ID Clock name Description
+ -----------------------------------
+ 0 mmc MMC controller
+ 1 sata_host Sata Host
+ 2 sec_at Security AT
+ 3 sac_dap Security DAP
+ 4 tsecm Security Engine
+ 5 setm_tmx Serial Embedded Trace Module
+ 6 avs Adaptive Voltage Scaling
+ 7 sqf SPI
+ 8 pwm PWM
+ 9 i2c_2 I2C 2
+ 10 i2c_1 I2C 1
+ 11 ddr_phy DDR PHY
+ 12 ddr_fclk DDR F clock
+ 13 trace Trace
+ 14 counter Counter
+ 15 eip97 EIP 97
+ 16 cpu CPU
+
+ The following is a list of provided IDs for Armada 3700 South bridge clocks:
+
+ ID Clock name Description
+ -----------------------------------
+ 0 gbe-50 50 MHz parent clock for Gigabit Ethernet
+ 1 gbe-core parent clock for Gigabit Ethernet core
+ 2 gbe-125 125 MHz parent clock for Gigabit Ethernet
+ 3 gbe1-50 50 MHz clock for Gigabit Ethernet port 1
+ 4 gbe0-50 50 MHz clock for Gigabit Ethernet port 0
+ 5 gbe1-125 125 MHz clock for Gigabit Ethernet port 1
+ 6 gbe0-125 125 MHz clock for Gigabit Ethernet port 0
+ 7 gbe1-core Gigabit Ethernet core port 1
+ 8 gbe0-core Gigabit Ethernet core port 0
+ 9 gbe-bm Gigabit Ethernet Buffer Manager
+ 10 sdio SDIO
+ 11 usb32-sub2-sys USB 2 clock
+ 12 usb32-ss-sys USB 3 clock
+ 13 pcie PCIe controller
+
+properties:
+ compatible:
+ oneOf:
+ - const: marvell,armada-3700-periph-clock-sb
+ - items:
+ - const: marvell,armada-3700-periph-clock-nb
+ - const: syscon
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: TBG-A P clock and specifier
+ - description: TBG-B P clock and specifier
+ - description: TBG-A S clock and specifier
+ - description: TBG-B S clock and specifier
+ - description: Xtal clock and specifier
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@13000{
+ compatible = "marvell,armada-3700-periph-clock-sb";
+ reg = <0x13000 0x1000>;
+ clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+ #clock-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-tbg-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3700 Time Base Generator Clock
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+ Marvell Armada 37xx SoCs provide Time Base Generator clocks which are used as
+ parent clocks for the peripheral clocks.
+
+ The TBG clock consumer should specify the desired clock by having the clock ID
+ in its "clocks" phandle cell.
+
+ The following is a list of provided IDs and clock names on Armada 3700:
+
+ 0 = TBG A P
+ 1 = TBG B P
+ 2 = TBG A S
+ 3 = TBG B S
+
+properties:
+ compatible:
+ const: marvell,armada-3700-tbg-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@13200 {
+ compatible = "marvell,armada-3700-tbg-clock";
+ reg = <0x13200 0x1000>;
+ clocks = <&xtalclk>;
+ #clock-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+$id: http://devicetree.org/schemas/clock/marvell,armada-xp-cpu-clock.yaml#
+
+title: Marvell EBU CPU Clock
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-xp-cpu-clock
+ - marvell,mv98dx3236-cpu-clock
+
+ reg:
+ items:
+ - description: Clock complex registers
+ - description: PMU DFS registers
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@d0018700 {
+ #clock-cells = <1>;
+ compatible = "marvell,armada-xp-cpu-clock";
+ reg = <0xd0018700 0xa0>, <0x1c054 0x10>;
+ clocks = <&coreclk 1>;
+ };
+++ /dev/null
-Device Tree Clock bindings for Marvell Berlin
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Clock related registers are spread among the chip control registers. Berlin
-clock node should be a sub-node of the chip controller node. Marvell Berlin2
-(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some
-minor differences in features and register layout.
-
-Required properties:
-- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk"
-- #clock-cells: must be 1
-- clocks: must be the input parent clock phandle
-- clock-names: name of the input parent clock
- Allowed clock-names for the reference clocks are
- "refclk" for the SoCs oscillator input on all SoCs,
- and SoC-specific input clocks for
- BG2/BG2CD: "video_ext0" for the external video clock input
-
-
-Example:
-
-chip_clk: clock {
- compatible = "marvell,berlin2q-clk";
-
- #clock-cells = <1>;
- clocks = <&refclk>;
- clock-names = "refclk";
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,berlin2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Berlin Clock Controller
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+
+description:
+ Clock related registers are spread among the chip control registers. Berlin
+ clock node should be a sub-node of the chip controller node. Marvell Berlin2
+ (BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some minor
+ differences in features and register layout.
+
+properties:
+ compatible:
+ enum:
+ - marvell,berlin2-clk
+ - marvell,berlin2q-clk
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - enum:
+ - refclk
+ - video_ext0
+
+required:
+ - compatible
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller {
+ compatible = "marvell,berlin2q-clk";
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/marvell,dove-divider-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Dove PLL Divider Clock
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+ Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+ high speed clocks for a number of peripherals. These dividers are part of the
+ PMU, and thus this node should be a child of the PMU node.
+
+ The following clocks are provided:
+
+ ID Clock
+ -------------
+ 0 AXI bus clock
+ 1 GPU clock
+ 2 VMeta clock
+ 3 LCD clock
+
+properties:
+ compatible:
+ const: marvell,dove-divider-clock
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@64 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mvebu-core-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU SoC core clock
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+ Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+ reading the Sample-At-Reset (SAR) register. The core clock consumer should
+ specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+ The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = nbclk (L2 Cache clock)
+ 3 = hclk (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+ The following is a list of provided IDs and clock names on Armada 375:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = l2clk (L2 Cache clock)
+ 3 = ddrclk (DDR clock)
+
+ The following is a list of provided IDs and clock names on Armada 380/385:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = l2clk (L2 Cache clock)
+ 3 = ddrclk (DDR clock)
+
+ The following is a list of provided IDs and clock names on Armada 39x:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = nbclk (Coherent Fabric clock)
+ 3 = hclk (SDRAM Controller Internal Clock)
+ 4 = dclk (SDRAM Interface Clock)
+ 5 = refclk (Reference Clock)
+
+ The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = ddrclk (DDR clock)
+ 3 = mpll (MPLL Clock)
+
+ The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+ The following is a list of provided IDs and clock names on Orion5x:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-370-core-clock
+ - marvell,armada-375-core-clock
+ - marvell,armada-380-core-clock
+ - marvell,armada-390-core-clock
+ - marvell,armada-xp-core-clock
+ - marvell,dove-core-clock
+ - marvell,kirkwood-core-clock
+ - marvell,mv88f5181-core-clock
+ - marvell,mv88f5182-core-clock
+ - marvell,mv88f5281-core-clock
+ - marvell,mv88f6180-core-clock
+ - marvell,mv88f6183-core-clock
+ - marvell,mv98dx1135-core-clock
+ - marvell,mv98dx3236-core-clock
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names:
+ description: Overwrite default clock output names.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/clock/marvell-armada-370-gating-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU SoC gating-clock
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+description: >
+ Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some peripheral
+ clocks to be gated to save some power. The clock ID is directly mapped to the
+ corresponding clock gating control bit in HW to ease manual clock lookup in
+ datasheet.
+
+ The following is a list of provided IDs for Armada 370:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 0 Audio AC97 Cntrl
+ 1 pex0_en PCIe 0 Clock out
+ 2 pex1_en PCIe 1 Clock out
+ 3 ge1 Gigabit Ethernet 1
+ 4 ge0 Gigabit Ethernet 0
+ 5 pex0 PCIe Cntrl 0
+ 9 pex1 PCIe Cntrl 1
+ 15 sata0 SATA Host 0
+ 17 sdio SDHCI Host
+ 23 crypto CESA (crypto engine)
+ 25 tdm Time Division Mplx
+ 28 ddr DDR Cntrl
+ 30 sata1 SATA Host 0
+
+ The following is a list of provided IDs for Armada 375:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 2 mu Management Unit
+ 3 pp Packet Processor
+ 4 ptp PTP
+ 5 pex0 PCIe 0 Clock out
+ 6 pex1 PCIe 1 Clock out
+ 8 audio Audio Cntrl
+ 11 nd_clk Nand Flash Cntrl
+ 14 sata0_link SATA 0 Link
+ 15 sata0_core SATA 0 Core
+ 16 usb3 USB3 Host
+ 17 sdio SDHCI Host
+ 18 usb USB Host
+ 19 gop Gigabit Ethernet MAC
+ 20 sata1_link SATA 1 Link
+ 21 sata1_core SATA 1 Core
+ 22 xor0 XOR DMA 0
+ 23 xor1 XOR DMA 0
+ 24 copro Coprocessor
+ 25 tdm Time Division Mplx
+ 28 crypto0_enc Cryptographic Unit Port 0 Encryption
+ 29 crypto0_core Cryptographic Unit Port 0 Core
+ 30 crypto1_enc Cryptographic Unit Port 1 Encryption
+ 31 crypto1_core Cryptographic Unit Port 1 Core
+
+ The following is a list of provided IDs for Armada 380/385:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 0 audio Audio
+ 2 ge2 Gigabit Ethernet 2
+ 3 ge1 Gigabit Ethernet 1
+ 4 ge0 Gigabit Ethernet 0
+ 5 pex1 PCIe 1
+ 6 pex2 PCIe 2
+ 7 pex3 PCIe 3
+ 8 pex0 PCIe 0
+ 9 usb3h0 USB3 Host 0
+ 10 usb3h1 USB3 Host 1
+ 11 usb3d USB3 Device
+ 13 bm Buffer Management
+ 14 crypto0z Cryptographic 0 Z
+ 15 sata0 SATA 0
+ 16 crypto1z Cryptographic 1 Z
+ 17 sdio SDIO
+ 18 usb2 USB 2
+ 21 crypto1 Cryptographic 1
+ 22 xor0 XOR 0
+ 23 crypto0 Cryptographic 0
+ 25 tdm Time Division Multiplexing
+ 28 xor1 XOR 1
+ 30 sata1 SATA 1
+
+ The following is a list of provided IDs for Armada 39x:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 5 pex1 PCIe 1
+ 6 pex2 PCIe 2
+ 7 pex3 PCIe 3
+ 8 pex0 PCIe 0
+ 9 usb3h0 USB3 Host 0
+ 10 usb3h1 USB3 Host 1
+ 15 sata0 SATA 0
+ 17 sdio SDIO
+ 22 xor0 XOR 0
+ 28 xor1 XOR 1
+
+ The following is a list of provided IDs for Armada XP:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 0 audio Audio Cntrl
+ 1 ge3 Gigabit Ethernet 3
+ 2 ge2 Gigabit Ethernet 2
+ 3 ge1 Gigabit Ethernet 1
+ 4 ge0 Gigabit Ethernet 0
+ 5 pex0 PCIe Cntrl 0
+ 6 pex1 PCIe Cntrl 1
+ 7 pex2 PCIe Cntrl 2
+ 8 pex3 PCIe Cntrl 3
+ 13 bp
+ 14 sata0lnk
+ 15 sata0 SATA Host 0
+ 16 lcd LCD Cntrl
+ 17 sdio SDHCI Host
+ 18 usb0 USB Host 0
+ 19 usb1 USB Host 1
+ 20 usb2 USB Host 2
+ 22 xor0 XOR DMA 0
+ 23 crypto CESA engine
+ 25 tdm Time Division Mplx
+ 28 xor1 XOR DMA 1
+ 29 sata1lnk
+ 30 sata1 SATA Host 1
+
+ The following is a list of provided IDs for 98dx3236:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 3 ge1 Gigabit Ethernet 1
+ 4 ge0 Gigabit Ethernet 0
+ 5 pex0 PCIe Cntrl 0
+ 17 sdio SDHCI Host
+ 18 usb0 USB Host 0
+ 22 xor0 XOR DMA 0
+
+ The following is a list of provided IDs for Dove:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 0 usb0 USB Host 0
+ 1 usb1 USB Host 1
+ 2 ge Gigabit Ethernet
+ 3 sata SATA Host
+ 4 pex0 PCIe Cntrl 0
+ 5 pex1 PCIe Cntrl 1
+ 8 sdio0 SDHCI Host 0
+ 9 sdio1 SDHCI Host 1
+ 10 nand NAND Cntrl
+ 11 camera Camera Cntrl
+ 12 i2s0 I2S Cntrl 0
+ 13 i2s1 I2S Cntrl 1
+ 15 crypto CESA engine
+ 21 ac97 AC97 Cntrl
+ 22 pdma Peripheral DMA
+ 23 xor0 XOR DMA 0
+ 24 xor1 XOR DMA 1
+ 30 gephy Gigabit Ethernet PHY
+ Note: gephy(30) is implemented as a parent clock of ge(2)
+
+ The following is a list of provided IDs for Kirkwood:
+
+ ID Clock Peripheral
+ -----------------------------------
+ 0 ge0 Gigabit Ethernet 0
+ 2 pex0 PCIe Cntrl 0
+ 3 usb0 USB Host 0
+ 4 sdio SDIO Cntrl
+ 5 tsu Transp. Stream Unit
+ 6 dunit SDRAM Cntrl
+ 7 runit Runit
+ 8 xor0 XOR DMA 0
+ 9 audio I2S Cntrl 0
+ 14 sata0 SATA Host 0
+ 15 sata1 SATA Host 1
+ 16 xor1 XOR DMA 1
+ 17 crypto CESA engine
+ 18 pex1 PCIe Cntrl 1
+ 19 ge1 Gigabit Ethernet 1
+ 20 tdm Time Division Mplx
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-370-gating-clock
+ - marvell,armada-375-gating-clock
+ - marvell,armada-380-gating-clock
+ - marvell,armada-390-gating-clock
+ - marvell,armada-xp-gating-clock
+ - marvell,mv98dx3236-gating-clock
+ - marvell,dove-gating-clock
+ - marvell,kirkwood-gating-clock
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@d0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0xd0038 0x4>;
+ /* default parent clock is tclk */
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+ };
+++ /dev/null
-Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
-
-This device exposes 4 clocks in total:
-
-- MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz
-- MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete
- frequencies
-- MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT
-
-MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
-requests.
-
-Required properties:
-- compatible: "maxim,max9485"
-- clocks: Input clock, must provide 27.000 MHz
-- clock-names: Must be set to "xclk"
-- #clock-cells: From common clock binding; shall be set to 1
-
-Optional properties:
-- reset-gpios: GPIO descriptor connected to the #RESET input pin
-- vdd-supply: A regulator node for Vdd
-- clock-output-names: Name of output clocks, as defined in common clock
- bindings
-
-If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
-and "clkout2".
-
-Clocks are defined as preprocessor macros in the dt-binding header.
-
-Example:
-
- #include <dt-bindings/clock/maxim,max9485.h>
-
- xo-27mhz: xo-27mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <27000000>;
- };
-
- &i2c0 {
- max9485: audio-clock@63 {
- reg = <0x63>;
- compatible = "maxim,max9485";
- clock-names = "xclk";
- clocks = <&xo-27mhz>;
- reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- vdd-supply = <&3v3-reg>;
- #clock-cells = <1>;
- };
- };
-
- // Clock consumer node
-
- foo@0 {
- compatible = "bar,foo";
- /* ... */
- clock-names = "foo-input-clk";
- clocks = <&max9485 MAX9485_CLKOUT1>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/maxim,max9485.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9485 Programmable Audio Clock Generator
+
+maintainers:
+ - Daniel Mack <daniel@zonque.org>
+
+description: >
+ Maxim MAX9485 Programmable Audio Clock Generator exposes 4 clocks in total:
+
+ - MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz
+ - MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete
+ frequencies
+ - MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT
+
+ MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
+ requests.
+
+properties:
+ compatible:
+ const: maxim,max9485
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Input clock. Must provide 27 MHz
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: xclk
+
+ '#clock-cells':
+ const: 1
+
+ reset-gpios:
+ description: >
+ GPIO descriptor connected to the #RESET input pin
+
+ vdd-supply:
+ description: A regulator node for Vdd
+
+ clock-output-names:
+ description: Name of output clocks, as defined in common clock bindings
+ items:
+ - const: mclkout
+ - const: clkout
+ - const: clkout1
+ - const: clkout2
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-controller@63 {
+ compatible = "maxim,max9485";
+ reg = <0x63>;
+ #clock-cells = <1>;
+ clock-names = "xclk";
+ clocks = <&xo_27mhz>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <®_3v3>;
+ };
+ };
properties:
compatible:
- items:
- - enum:
- - ralink,mt7620-sysc
- - ralink,mt7628-sysc
- - ralink,mt7688-sysc
- - ralink,rt2880-sysc
- - ralink,rt3050-sysc
- - ralink,rt3052-sysc
- - ralink,rt3352-sysc
- - ralink,rt3883-sysc
- - ralink,rt5350-sysc
- - const: syscon
+ oneOf:
+ - items:
+ - enum:
+ - ralink,mt7620-sysc
+ - ralink,mt7688-sysc
+ - ralink,rt2880-sysc
+ - ralink,rt3050-sysc
+ - ralink,rt3052-sysc
+ - ralink,rt3352-sysc
+ - ralink,rt3883-sysc
+ - ralink,rt5350-sysc
+ - const: syscon
+ - items:
+ - const: ralink,mt7628-sysc
+ - const: ralink,mt7688-sysc
+ - const: syscon
reg:
maxItems: 1
+++ /dev/null
-Microchip PIC32 Clock Controller Binding
-----------------------------------------
-Microchip clock controller is consists of few oscillators, PLL, multiplexer
-and few divider modules.
-
-This binding uses common clock bindings.
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible: shall be "microchip,pic32mzda-clk".
-- reg: shall contain base address and length of clock registers.
-- #clock-cells: shall be 1.
-
-Optional properties:
-- microchip,pic32mzda-sosc: shall be added only if platform has
- secondary oscillator connected.
-
-Example:
- rootclk: clock-controller@1f801200 {
- compatible = "microchip,pic32mzda-clk";
- reg = <0x1f801200 0x200>;
- #clock-cells = <1>;
- /* optional */
- microchip,pic32mzda-sosc;
- };
-
-
-The clock consumer shall specify the desired clock-output of the clock
-controller (as defined in [2]) by specifying output-id in its "clock"
-phandle cell.
-[2] include/dt-bindings/clock/microchip,pic32-clock.h
-
-For example for UART2:
-uart2: serial@2 {
- compatible = "microchip,pic32mzda-uart";
- reg = <>;
- interrupts = <>;
- clocks = <&rootclk PB2CLK>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,pic32mzda-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32MZDA Clock Controller
+
+maintainers:
+ - Purna Chandra Mandal <purna.mandal@microchip.com>
+
+description:
+ Microchip clock controller consists of a few oscillators, PLL, multiplexer
+ and divider modules.
+
+properties:
+ compatible:
+ const: microchip,pic32mzda-clk
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ microchip,pic32mzda-sosc:
+ description: Presence of secondary oscillator.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@1f801200 {
+ compatible = "microchip,pic32mzda-clk";
+ reg = <0x1f801200 0x200>;
+ #clock-cells = <1>;
+ /* optional */
+ microchip,pic32mzda-sosc;
+ };
+++ /dev/null
-Device Tree Clock bindings for arch-moxart
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-MOXA ART SoCs allow to determine PLL output and APB frequencies
-by reading registers holding multiplier and divisor information.
-
-
-PLL:
-
-Required properties:
-- compatible : Must be "moxa,moxart-pll-clock"
-- #clock-cells : Should be 0
-- reg : Should contain registers location and length
-- clocks : Should contain phandle + clock-specifier for the parent clock
-
-Optional properties:
-- clock-output-names : Should contain clock name
-
-
-APB:
-
-Required properties:
-- compatible : Must be "moxa,moxart-apb-clock"
-- #clock-cells : Should be 0
-- reg : Should contain registers location and length
-- clocks : Should contain phandle + clock-specifier for the parent clock
-
-Optional properties:
-- clock-output-names : Should contain clock name
-
-
-For example:
-
- clk_pll: clk_pll@98100000 {
- compatible = "moxa,moxart-pll-clock";
- #clock-cells = <0>;
- reg = <0x98100000 0x34>;
- };
-
- clk_apb: clk_apb@98100000 {
- compatible = "moxa,moxart-apb-clock";
- #clock-cells = <0>;
- reg = <0x98100000 0x34>;
- clocks = <&clk_pll>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/moxa,moxart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MOXA ART Clock Controllers
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+ MOXA ART SoCs allow to determine PLL output and APB frequencies by reading
+ registers holding multiplier and divisor information.
+
+properties:
+ compatible:
+ enum:
+ - moxa,moxart-apb-clock
+ - moxa,moxart-pll-clock
+
+ "#clock-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#clock-cells"
+ - reg
+++ /dev/null
-* Core Clock bindings for Marvell MVEBU SoCs
-
-Marvell MVEBU SoCs usually allow to determine core clock frequencies by
-reading the Sample-At-Reset (SAR) register. The core clock consumer should
-specify the desired clock by having the clock ID in its "clocks" phandle cell.
-
-The following is a list of provided IDs and clock names on Armada 370/XP:
- 0 = tclk (Internal Bus clock)
- 1 = cpuclk (CPU clock)
- 2 = nbclk (L2 Cache clock)
- 3 = hclk (DRAM control clock)
- 4 = dramclk (DDR clock)
-
-The following is a list of provided IDs and clock names on Armada 375:
- 0 = tclk (Internal Bus clock)
- 1 = cpuclk (CPU clock)
- 2 = l2clk (L2 Cache clock)
- 3 = ddrclk (DDR clock)
-
-The following is a list of provided IDs and clock names on Armada 380/385:
- 0 = tclk (Internal Bus clock)
- 1 = cpuclk (CPU clock)
- 2 = l2clk (L2 Cache clock)
- 3 = ddrclk (DDR clock)
-
-The following is a list of provided IDs and clock names on Armada 39x:
- 0 = tclk (Internal Bus clock)
- 1 = cpuclk (CPU clock)
- 2 = nbclk (Coherent Fabric clock)
- 3 = hclk (SDRAM Controller Internal Clock)
- 4 = dclk (SDRAM Interface Clock)
- 5 = refclk (Reference Clock)
-
-The following is a list of provided IDs and clock names on 98dx3236:
- 0 = tclk (Internal Bus clock)
- 1 = cpuclk (CPU clock)
- 2 = ddrclk (DDR clock)
- 3 = mpll (MPLL Clock)
-
-The following is a list of provided IDs and clock names on Kirkwood and Dove:
- 0 = tclk (Internal Bus clock)
- 1 = cpuclk (CPU0 clock)
- 2 = l2clk (L2 Cache clock derived from CPU0 clock)
- 3 = ddrclk (DDR controller clock derived from CPU0 clock)
-
-The following is a list of provided IDs and clock names on Orion5x:
- 0 = tclk (Internal Bus clock)
- 1 = cpuclk (CPU0 clock)
- 2 = ddrclk (DDR controller clock derived from CPU0 clock)
-
-Required properties:
-- compatible : shall be one of the following:
- "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
- "marvell,armada-375-core-clock" - For Armada 375 SoC core clocks
- "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
- "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
- "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
- "marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
- "marvell,dove-core-clock" - for Dove SoC core clocks
- "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
- "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
- "marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC
- "marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC
- "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
- "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
- "marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
-- reg : shall be the register address of the Sample-At-Reset (SAR) register
-- #clock-cells : from common clock binding; shall be set to 1
-
-Optional properties:
-- clock-output-names : from common clock binding; allows overwrite default clock
- output names ("tclk", "cpuclk", "l2clk", "ddrclk")
-
-Example:
-
-core_clk: core-clocks@d0214 {
- compatible = "marvell,dove-core-clock";
- reg = <0xd0214 0x4>;
- #clock-cells = <1>;
-};
-
-spi0: spi@10600 {
- compatible = "marvell,orion-spi";
- /* ... */
- /* get tclk from core clock provider */
- clocks = <&core_clk 0>;
-};
+++ /dev/null
-* Core Divider Clock bindings for Marvell MVEBU SoCs
-
-The following is a list of provided IDs and clock names on Armada 370/XP:
- 0 = nand (NAND clock)
-
-Required properties:
-- compatible : must be "marvell,armada-370-corediv-clock",
- "marvell,armada-375-corediv-clock",
- "marvell,armada-380-corediv-clock",
- "marvell,mv98dx3236-corediv-clock",
-
-- reg : must be the register address of Core Divider control register
-- #clock-cells : from common clock binding; shall be set to 1
-- clocks : must be set to the parent's phandle
-
-Example:
-
-corediv_clk: corediv-clocks@18740 {
- compatible = "marvell,armada-370-corediv-clock";
- reg = <0x18740 0xc>;
- #clock-cells = <1>;
- clocks = <&pll>;
-};
+++ /dev/null
-Device Tree Clock bindings for cpu clock of Marvell EBU platforms
-
-Required properties:
-- compatible : shall be one of the following:
- "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
- "marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
-- reg : Address and length of the clock complex register set, followed
- by address and length of the PMU DFS registers
-- #clock-cells : should be set to 1.
-- clocks : shall be the input parent clock phandle for the clock.
-
-cpuclk: clock-complex@d0018700 {
- #clock-cells = <1>;
- compatible = "marvell,armada-xp-cpu-clock";
- reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
- clocks = <&coreclk 1>;
-}
-
-cpu@0 {
- compatible = "marvell,sheeva-v7";
- reg = <0>;
- clocks = <&cpuclk 0>;
-};
+++ /dev/null
-* Gated Clock bindings for Marvell EBU SoCs
-
-Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some
-peripheral clocks to be gated to save some power. The clock consumer
-should specify the desired clock by having the clock ID in its
-"clocks" phandle cell. The clock ID is directly mapped to the
-corresponding clock gating control bit in HW to ease manual clock
-lookup in datasheet.
-
-The following is a list of provided IDs for Armada 370:
-ID Clock Peripheral
------------------------------------
-0 Audio AC97 Cntrl
-1 pex0_en PCIe 0 Clock out
-2 pex1_en PCIe 1 Clock out
-3 ge1 Gigabit Ethernet 1
-4 ge0 Gigabit Ethernet 0
-5 pex0 PCIe Cntrl 0
-9 pex1 PCIe Cntrl 1
-15 sata0 SATA Host 0
-17 sdio SDHCI Host
-23 crypto CESA (crypto engine)
-25 tdm Time Division Mplx
-28 ddr DDR Cntrl
-30 sata1 SATA Host 0
-
-The following is a list of provided IDs for Armada 375:
-ID Clock Peripheral
------------------------------------
-2 mu Management Unit
-3 pp Packet Processor
-4 ptp PTP
-5 pex0 PCIe 0 Clock out
-6 pex1 PCIe 1 Clock out
-8 audio Audio Cntrl
-11 nd_clk Nand Flash Cntrl
-14 sata0_link SATA 0 Link
-15 sata0_core SATA 0 Core
-16 usb3 USB3 Host
-17 sdio SDHCI Host
-18 usb USB Host
-19 gop Gigabit Ethernet MAC
-20 sata1_link SATA 1 Link
-21 sata1_core SATA 1 Core
-22 xor0 XOR DMA 0
-23 xor1 XOR DMA 0
-24 copro Coprocessor
-25 tdm Time Division Mplx
-28 crypto0_enc Cryptographic Unit Port 0 Encryption
-29 crypto0_core Cryptographic Unit Port 0 Core
-30 crypto1_enc Cryptographic Unit Port 1 Encryption
-31 crypto1_core Cryptographic Unit Port 1 Core
-
-The following is a list of provided IDs for Armada 380/385:
-ID Clock Peripheral
------------------------------------
-0 audio Audio
-2 ge2 Gigabit Ethernet 2
-3 ge1 Gigabit Ethernet 1
-4 ge0 Gigabit Ethernet 0
-5 pex1 PCIe 1
-6 pex2 PCIe 2
-7 pex3 PCIe 3
-8 pex0 PCIe 0
-9 usb3h0 USB3 Host 0
-10 usb3h1 USB3 Host 1
-11 usb3d USB3 Device
-13 bm Buffer Management
-14 crypto0z Cryptographic 0 Z
-15 sata0 SATA 0
-16 crypto1z Cryptographic 1 Z
-17 sdio SDIO
-18 usb2 USB 2
-21 crypto1 Cryptographic 1
-22 xor0 XOR 0
-23 crypto0 Cryptographic 0
-25 tdm Time Division Multiplexing
-28 xor1 XOR 1
-30 sata1 SATA 1
-
-The following is a list of provided IDs for Armada 39x:
-ID Clock Peripheral
------------------------------------
-5 pex1 PCIe 1
-6 pex2 PCIe 2
-7 pex3 PCIe 3
-8 pex0 PCIe 0
-9 usb3h0 USB3 Host 0
-10 usb3h1 USB3 Host 1
-15 sata0 SATA 0
-17 sdio SDIO
-22 xor0 XOR 0
-28 xor1 XOR 1
-
-The following is a list of provided IDs for Armada XP:
-ID Clock Peripheral
------------------------------------
-0 audio Audio Cntrl
-1 ge3 Gigabit Ethernet 3
-2 ge2 Gigabit Ethernet 2
-3 ge1 Gigabit Ethernet 1
-4 ge0 Gigabit Ethernet 0
-5 pex0 PCIe Cntrl 0
-6 pex1 PCIe Cntrl 1
-7 pex2 PCIe Cntrl 2
-8 pex3 PCIe Cntrl 3
-13 bp
-14 sata0lnk
-15 sata0 SATA Host 0
-16 lcd LCD Cntrl
-17 sdio SDHCI Host
-18 usb0 USB Host 0
-19 usb1 USB Host 1
-20 usb2 USB Host 2
-22 xor0 XOR DMA 0
-23 crypto CESA engine
-25 tdm Time Division Mplx
-28 xor1 XOR DMA 1
-29 sata1lnk
-30 sata1 SATA Host 1
-
-The following is a list of provided IDs for 98dx3236:
-ID Clock Peripheral
------------------------------------
-3 ge1 Gigabit Ethernet 1
-4 ge0 Gigabit Ethernet 0
-5 pex0 PCIe Cntrl 0
-17 sdio SDHCI Host
-18 usb0 USB Host 0
-22 xor0 XOR DMA 0
-
-The following is a list of provided IDs for Dove:
-ID Clock Peripheral
------------------------------------
-0 usb0 USB Host 0
-1 usb1 USB Host 1
-2 ge Gigabit Ethernet
-3 sata SATA Host
-4 pex0 PCIe Cntrl 0
-5 pex1 PCIe Cntrl 1
-8 sdio0 SDHCI Host 0
-9 sdio1 SDHCI Host 1
-10 nand NAND Cntrl
-11 camera Camera Cntrl
-12 i2s0 I2S Cntrl 0
-13 i2s1 I2S Cntrl 1
-15 crypto CESA engine
-21 ac97 AC97 Cntrl
-22 pdma Peripheral DMA
-23 xor0 XOR DMA 0
-24 xor1 XOR DMA 1
-30 gephy Gigabit Ethernel PHY
-Note: gephy(30) is implemented as a parent clock of ge(2)
-
-The following is a list of provided IDs for Kirkwood:
-ID Clock Peripheral
------------------------------------
-0 ge0 Gigabit Ethernet 0
-2 pex0 PCIe Cntrl 0
-3 usb0 USB Host 0
-4 sdio SDIO Cntrl
-5 tsu Transp. Stream Unit
-6 dunit SDRAM Cntrl
-7 runit Runit
-8 xor0 XOR DMA 0
-9 audio I2S Cntrl 0
-14 sata0 SATA Host 0
-15 sata1 SATA Host 1
-16 xor1 XOR DMA 1
-17 crypto CESA engine
-18 pex1 PCIe Cntrl 1
-19 ge1 Gigabit Ethernet 1
-20 tdm Time Division Mplx
-
-Required properties:
-- compatible : shall be one of the following:
- "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
- "marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating
- "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
- "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
- "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
- "marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
- "marvell,dove-gating-clock" - for Dove SoC clock gating
- "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
-- reg : shall be the register address of the Clock Gating Control register
-- #clock-cells : from common clock binding; shall be set to 1
-
-Optional properties:
-- clocks : default parent clock phandle (e.g. tclk)
-
-Example:
-
-gate_clk: clock-gating-control@d0038 {
- compatible = "marvell,dove-gating-clock";
- reg = <0xd0038 0x4>;
- /* default parent clock is tclk */
- clocks = <&core_clk 0>;
- #clock-cells = <1>;
-};
-
-sdio0: sdio@92000 {
- compatible = "marvell,dove-sdhci";
- /* get clk gate bit 8 (sdio0) */
- clocks = <&gate_clk 8>;
-};
+++ /dev/null
-TI-NSPIRE Clocks
-
-Required properties:
-- compatible: Valid compatible properties include:
- "lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model
- "lsi,nspire-classic-ahb-divider" for the AHB divider in the older model
- "lsi,nspire-cx-clock" for the base clock in the CX model
- "lsi,nspire-classic-clock" for the base clock in the older model
-
-- reg: Physical base address of the controller and length of memory mapped
- region.
-
-Optional:
-- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent
- clock where it divides the rate from.
-
-Example:
-
-ahb_clk {
- #clock-cells = <0>;
- compatible = "lsi,nspire-cx-clock";
- reg = <0x900B0000 0x4>;
- clocks = <&base_clk>;
-};
+++ /dev/null
-* Nuvoton NPCM7XX Clock Controller
-
-Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
-generates and supplies clocks to all modules within the BMC.
-
-External clocks:
-
-There are six fixed clocks that are generated outside the BMC. All clocks are of
-a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
-clk_sysbypck are inputs to the clock controller.
-clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
-network. They are set on the device tree, but not used by the clock module. The
-network devices use them directly.
-Example can be found below.
-
-All available clocks are defined as preprocessor macros in:
-dt-bindings/clock/nuvoton,npcm7xx-clock.h
-and can be reused as DT sources.
-
-Required Properties of clock controller:
-
- - compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
- Poleg BMC NPCM750
-
- - reg: physical base address of the clock controller and length of
- memory mapped region.
-
- - #clock-cells: should be 1.
-
-Example: Clock controller node:
-
- clk: clock-controller@f0801000 {
- compatible = "nuvoton,npcm750-clk";
- #clock-cells = <1>;
- reg = <0xf0801000 0x1000>;
- clock-names = "refclk", "sysbypck", "mcbypck";
- clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
- };
-
-Example: Required external clocks for network:
-
- /* external reference clock */
- clk_refclk: clk-refclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- clock-output-names = "refclk";
- };
-
- /* external reference clock for cpu. float in normal operation */
- clk_sysbypck: clk-sysbypck {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <800000000>;
- clock-output-names = "sysbypck";
- };
-
- /* external reference clock for MC. float in normal operation */
- clk_mcbypck: clk-mcbypck {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <800000000>;
- clock-output-names = "mcbypck";
- };
-
- /* external clock signal rg1refck, supplied by the phy */
- clk_rg1refck: clk-rg1refck {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "clk_rg1refck";
- };
-
- /* external clock signal rg2refck, supplied by the phy */
- clk_rg2refck: clk-rg2refck {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "clk_rg2refck";
- };
-
- clk_xin: clk-xin {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <50000000>;
- clock-output-names = "clk_xin";
- };
-
-
-Example: GMAC controller node that consumes two clocks: a generated clk by the
-clock controller and a fixed clock from DT (clk_rg1refck).
-
- ethernet0: ethernet@f0802000 {
- compatible = "snps,dwmac";
- reg = <0xf0802000 0x2000>;
- interrupts = <0 14 4>;
- interrupt-names = "macirq";
- clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
- clock-names = "stmmaceth", "clk_gmac";
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm750-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM7XX Clock Controller
+
+maintainers:
+ - Tali Perry <tali.perry1@gmail.com>
+
+description: >
+ Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
+ generates and supplies clocks to all modules within the BMC.
+
+ External clocks:
+
+ There are six fixed clocks that are generated outside the BMC. All clocks are of
+ a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
+ clk_sysbypck are inputs to the clock controller.
+ clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
+ network. They are set on the device tree, but not used by the clock module. The
+ network devices use them directly.
+
+ All available clocks are defined as preprocessor macros in:
+ dt-bindings/clock/nuvoton,npcm7xx-clock.h
+ and can be reused as DT sources.
+
+properties:
+ compatible:
+ const: nuvoton,npcm750-clk
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clock-names:
+ items:
+ - const: refclk
+ - const: sysbypck
+ - const: mcbypck
+
+ clocks:
+ items:
+ - description: refclk
+ - description: sysbypck
+ - description: mcbypck
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@f0801000 {
+ compatible = "nuvoton,npcm750-clk";
+ #clock-cells = <1>;
+ reg = <0xf0801000 0x1000>;
+ clock-names = "refclk", "sysbypck", "mcbypck";
+ clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+ };
compatible:
items:
- enum:
+ - nxp,imx94-display-csr
+ - nxp,imx94-lvds-csr
- nxp,imx95-camera-csr
- nxp,imx95-display-csr
- nxp,imx95-hsio-blk-ctl
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc1850-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 Clock Control Unit (CCU)
+
+description:
+ Each CGU base clock has several clock branches which can be turned on
+ or off independently by the Clock Control Units CCU1 or CCU2. The
+ branch clocks are distributed between CCU1 and CCU2.
+
+ Above text taken from NXP LPC1850 User Manual
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-ccu
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 8
+
+ clock-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ enum:
+ - base_usb0_clk
+ - base_periph_clk
+ - base_usb1_clk
+ - base_cpu_clk
+ - base_spifi_clk
+ - base_spi_clk
+ - base_apb1_clk
+ - base_apb3_clk
+ - base_adchs_clk
+ - base_sdio_clk
+ - base_ssp0_clk
+ - base_ssp1_clk
+ - base_uart0_clk
+ - base_uart1_clk
+ - base_uart2_clk
+ - base_uart3_clk
+ - base_audio_clk
+ description:
+ Which branch clocks that are available on the CCU depends on the
+ specific LPC part. Check the user manual for your specific part.
+
+ A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-cgu.h>
+
+ clock-controller@40051000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40051000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
+ <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
+ <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+ <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
+ clock-names = "base_apb3_clk", "base_apb1_clk",
+ "base_spifi_clk", "base_cpu_clk",
+ "base_periph_clk", "base_usb0_clk",
+ "base_usb1_clk", "base_spi_clk";
+ };
+
+ - |
+ #include <dt-bindings/clock/lpc18xx-cgu.h>
+
+ clock-controller@40052000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40052000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+ <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+ <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+ <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>;
+ clock-names = "base_audio_clk", "base_uart3_clk",
+ "base_uart2_clk", "base_uart1_clk",
+ "base_uart0_clk", "base_ssp1_clk",
+ "base_ssp0_clk", "base_sdio_clk";
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nxp,lpc1850-cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 Clock Generation Unit (CGU)
+
+description: >
+ The CGU generates multiple independent clocks for the core and the
+ peripheral blocks of the LPC18xx. Each independent clock is called
+ a base clock and itself is one of the inputs to the two Clock
+ Control Units (CCUs) which control the branch clocks to the
+ individual peripherals.
+
+ The CGU selects the inputs to the clock generators from multiple
+ clock sources, controls the clock generation, and routes the outputs
+ of the clock generators through the clock source bus to the output
+ stages. Each output stage provides an independent clock source and
+ corresponds to one of the base clocks for the LPC18xx.
+
+ Above text taken from NXP LPC1850 User Manual.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-cgu
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+ description: |
+ Which base clocks that are available on the CGU depends on the
+ specific LPC part. Base clocks are numbered from 0 to 27.
+
+ Number: Name: Description:
+ 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT
+ 1 BASE_USB0_CLK Base clock for USB0
+ 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem,
+ SPI, and SGPIO
+ 3 BASE_USB1_CLK Base clock for USB1
+ 4 BASE_CPU_CLK System base clock for ARM Cortex-M core
+ and APB peripheral blocks #0 and #2
+ 5 BASE_SPIFI_CLK Base clock for SPIFI
+ 6 BASE_SPI_CLK Base clock for SPI
+ 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock
+ 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock
+ 9 BASE_APB1_CLK Base clock for APB peripheral block # 1
+ 10 BASE_APB3_CLK Base clock for APB peripheral block # 3
+ 11 BASE_LCD_CLK Base clock for LCD
+ 12 BASE_ADCHS_CLK Base clock for ADCHS
+ 13 BASE_SDIO_CLK Base clock for SD/MMC
+ 14 BASE_SSP0_CLK Base clock for SSP0
+ 15 BASE_SSP1_CLK Base clock for SSP1
+ 16 BASE_UART0_CLK Base clock for UART0
+ 17 BASE_UART1_CLK Base clock for UART1
+ 18 BASE_UART2_CLK Base clock for UART2
+ 19 BASE_UART3_CLK Base clock for UART3
+ 20 BASE_OUT_CLK Base clock for CLKOUT pin
+ 24-21 - Reserved
+ 25 BASE_AUDIO_CLK Base clock for audio system (I2S)
+ 26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output
+ 27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output
+
+ BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
+ BASE_ADCHS_CLK is only available on LPC4370.
+
+ clocks:
+ maxItems: 5
+
+ clock-indices:
+ minItems: 1
+ maxItems: 28
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 28
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@40050000 {
+ compatible = "nxp,lpc1850-cgu";
+ reg = <0x40050000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+ };
+
+++ /dev/null
-Imagination Technologies Pistachio SoC clock controllers
-========================================================
-
-Pistachio has four clock controllers (core clock, peripheral clock, peripheral
-general control, and top general control) which are instantiated individually
-from the device-tree.
-
-External clocks:
-----------------
-
-There are three external inputs to the clock controllers which should be
-defined with the following clock-output-names:
-- "xtal": External 52Mhz oscillator (required)
-- "audio_clk_in": Alternate audio reference clock (optional)
-- "enet_clk_in": Alternate ethernet PHY clock (optional)
-
-Core clock controller:
-----------------------
-
-The core clock controller generates clocks for the CPU, RPU (WiFi + BT
-co-processor), audio, and several peripherals.
-
-Required properties:
-- compatible: Must be "img,pistachio-clk".
-- reg: Must contain the base address and length of the core clock controller.
-- #clock-cells: Must be 1. The single cell is the clock identifier.
- See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Must include "xtal" (see "External clocks") and
- "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the
- top-level general control.
-
-Example:
- clk_core: clock-controller@18144000 {
- compatible = "img,pistachio-clk";
- reg = <0x18144000 0x800>;
- clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
- <&cr_top EXT_CLK_ENET_IN>;
- clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate";
-
- #clock-cells = <1>;
- };
-
-Peripheral clock controller:
-----------------------------
-
-The peripheral clock controller generates clocks for the DDR, ROM, and other
-peripherals. The peripheral system clock ("periph_sys") generated by the core
-clock controller is the input clock to the peripheral clock controller.
-
-Required properties:
-- compatible: Must be "img,pistachio-periph-clk".
-- reg: Must contain the base address and length of the peripheral clock
- controller.
-- #clock-cells: Must be 1. The single cell is the clock identifier.
- See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Must include "periph_sys", the peripheral system clock generated
- by the core clock controller.
-
-Example:
- clk_periph: clock-controller@18144800 {
- compatible = "img,pistachio-clk-periph";
- reg = <0x18144800 0x800>;
- clocks = <&clk_core CLK_PERIPH_SYS>;
- clock-names = "periph_sys";
-
- #clock-cells = <1>;
- };
-
-Peripheral general control:
----------------------------
-
-The peripheral general control block generates system interface clocks and
-resets for various peripherals. It also contains miscellaneous peripheral
-control registers. The system clock ("sys") generated by the peripheral clock
-controller is the input clock to the system clock controller.
-
-Required properties:
-- compatible: Must include "img,pistachio-periph-cr" and "syscon".
-- reg: Must contain the base address and length of the peripheral general
- control registers.
-- #clock-cells: Must be 1. The single cell is the clock identifier.
- See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Must include "sys", the system clock generated by the peripheral
- clock controller.
-
-Example:
- cr_periph: syscon@18144800 {
- compatible = "img,pistachio-cr-periph", "syscon";
- reg = <0x18148000 0x1000>;
- clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>;
- clock-names = "sys";
-
- #clock-cells = <1>;
- };
-
-Top-level general control:
---------------------------
-
-The top-level general control block contains miscellaneous control registers and
-gates for the external clocks "audio_clk_in" and "enet_clk_in".
-
-Required properties:
-- compatible: Must include "img,pistachio-cr-top" and "syscon".
-- reg: Must contain the base address and length of the top-level
- control registers.
-- clocks: Must contain an entry for each clock in clock-names.
-- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
- "External clocks").
-- #clock-cells: Must be 1. The single cell is the clock identifier.
- See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
-
-Example:
- cr_top: syscon@18144800 {
- compatible = "img,pistachio-cr-top", "syscon";
- reg = <0x18149000 0x200>;
- clocks = <&audio_refclk>, <&ext_enet_in>;
- clock-names = "audio_clk_in", "enet_clk_in";
-
- #clock-cells = <1>;
- };
+++ /dev/null
-Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
-
-The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
-
-Required Properties:
-- compatible: has to be "qca,<soctype>-pll" and one of the following
- fallbacks:
- - "qca,ar7100-pll"
- - "qca,ar7240-pll"
- - "qca,ar9130-pll"
- - "qca,ar9330-pll"
- - "qca,ar9340-pll"
- - "qca,qca9550-pll"
-- reg: Base address and size of the controllers memory area
-- clock-names: Name of the input clock, has to be "ref"
-- clocks: phandle of the external reference clock
-- #clock-cells: has to be one
-
-Optional properties:
-- clock-output-names: should be "cpu", "ddr", "ahb"
-
-Example:
-
- pll-controller@18050000 {
- compatible = "qca,ar9132-pll", "qca,ar9130-pll";
- reg = <0x18050000 0x20>;
-
- clock-names = "ref";
- clocks = <&extosc>;
-
- #clock-cells = <1>;
- clock-output-names = "cpu", "ddr", "ahb";
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qca,ath79-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ATH79 PLL controller
+
+maintainers:
+ - Alban Bedel <albeu@free.fr>
+ - Antony Pavlov <antonynpavlov@gmail.com>
+
+description: >
+ The PLL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: qca,ar9132-pll
+ - const: qca,ar9130-pll
+ - items:
+ - enum:
+ - qca,ar7100-pll
+ - qca,ar7240-pll
+ - qca,ar9130-pll
+ - qca,ar9330-pll
+ - qca,ar9340-pll
+ - qca,qca9530-pll
+ - qca,qca9550-pll
+ - qca,qca9560-pll
+
+ reg:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ref
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names:
+ items:
+ - const: cpu
+ - const: ddr
+ - const: ahb
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller@18050000 {
+ compatible = "qca,ar9132-pll", "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+ clock-names = "ref";
+ clocks = <&extosc>;
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
Qualcomm camera clock control module provides the clocks, resets and
power domains on SM8250.
- See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
+ See also: include/dt-bindings/clock/qcom,camcc-sm8250.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm display clock control module provides the clocks and power domains
on SM6125.
- See also:: include/dt-bindings/clock/qcom,dispcc-sm6125.h
+ See also: include/dt-bindings/clock/qcom,dispcc-sm6125.h
properties:
compatible:
Qualcomm display clock control module provides the clocks, resets and power
domains on SM6350.
- See also:: include/dt-bindings/clock/qcom,dispcc-sm6350.h
+ See also: include/dt-bindings/clock/qcom,dispcc-sm6350.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on IPQ4019.
- See also:: include/dt-bindings/clock/qcom,gcc-ipq4019.h
+ See also: include/dt-bindings/clock/qcom,gcc-ipq4019.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm global clock control module provides the clocks, resets and power
domains on IPQ8074.
- See also:: include/dt-bindings/clock/qcom,gcc-ipq8074.h
+ See also: include/dt-bindings/clock/qcom,gcc-ipq8074.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm global clock control module provides the clocks, resets and power
domains on MSM8976.
- See also:: include/dt-bindings/clock/qcom,gcc-msm8976.h
+ See also: include/dt-bindings/clock/qcom,gcc-msm8976.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on MSM8994 and MSM8992.
- See also:: include/dt-bindings/clock/qcom,gcc-msm8994.h
+ See also: include/dt-bindings/clock/qcom,gcc-msm8994.h
properties:
compatible:
Qualcomm global clock control module which provides the clocks, resets and
power domains on MSM8996.
- See also:: include/dt-bindings/clock/qcom,gcc-msm8996.h
+ See also: include/dt-bindings/clock/qcom,gcc-msm8996.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on MSM8998.
- See also:: include/dt-bindings/clock/qcom,gcc-msm8998.h
+ See also: include/dt-bindings/clock/qcom,gcc-msm8998.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on QCM2290.
- See also:: include/dt-bindings/clock/qcom,gcc-qcm2290.h
+ See also: include/dt-bindings/clock/qcom,gcc-qcm2290.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on QCS404.
- See also:: include/dt-bindings/clock/qcom,gcc-qcs404.h
+ See also: include/dt-bindings/clock/qcom,gcc-qcs404.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SC7180.
- See also:: include/dt-bindings/clock/qcom,gcc-sc7180.h
+ See also: include/dt-bindings/clock/qcom,gcc-sc7180.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SC7280.
- See also:: include/dt-bindings/clock/qcom,gcc-sc7280.h
+ See also: include/dt-bindings/clock/qcom,gcc-sc7280.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SC8180x.
- See also:: include/dt-bindings/clock/qcom,gcc-sc8180x.h
+ See also: include/dt-bindings/clock/qcom,gcc-sc8180x.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and
power domains on SC8280xp.
- See also:: include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+ See also: include/dt-bindings/clock/qcom,gcc-sc8280xp.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SDM670 and SDM845
- See also:: include/dt-bindings/clock/qcom,gcc-sdm845.h
+ See also: include/dt-bindings/clock/qcom,gcc-sdm845.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and
power domains on SDX55
- See also:: include/dt-bindings/clock/qcom,gcc-sdx55.h
+ See also: include/dt-bindings/clock/qcom,gcc-sdx55.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SDX65
- See also:: include/dt-bindings/clock/qcom,gcc-sdx65.h
+ See also: include/dt-bindings/clock/qcom,gcc-sdx65.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM4250/6115.
- See also:: include/dt-bindings/clock/qcom,gcc-sm6115.h
+ See also: include/dt-bindings/clock/qcom,gcc-sm6115.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM6125.
- See also:: include/dt-bindings/clock/qcom,gcc-sm6125.h
+ See also: include/dt-bindings/clock/qcom,gcc-sm6125.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM6350.
- See also:: include/dt-bindings/clock/qcom,gcc-sm6350.h
+ See also: include/dt-bindings/clock/qcom,gcc-sm6350.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM8150.
- See also:: include/dt-bindings/clock/qcom,gcc-sm8150.h
+ See also: include/dt-bindings/clock/qcom,gcc-sm8150.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM8250.
- See also:: include/dt-bindings/clock/qcom,gcc-sm8250.h
+ See also: include/dt-bindings/clock/qcom,gcc-sm8250.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM8350.
- See also:: include/dt-bindings/clock/qcom,gcc-sm8350.h
+ See also: include/dt-bindings/clock/qcom,gcc-sm8350.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM8450
- See also:: include/dt-bindings/clock/qcom,gcc-sm8450.h
+ See also: include/dt-bindings/clock/qcom,gcc-sm8450.h
properties:
compatible:
properties:
compatible:
enum:
+ - qcom,ipq5018-cmn-pll
+ - qcom,ipq5424-cmn-pll
- qcom,ipq9574-cmn-pll
reg:
+++ /dev/null
-Krait Clock Controller
-
-PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,krait-cc-v1"
- "qcom,krait-cc-v2"
-
-- #clock-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 1
-
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to the clock parents of hfpll, secondary muxes.
-
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb".
-
-Example:
-
- kraitcc: clock-controller {
- compatible = "qcom,krait-cc-v1";
- clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>;
- clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb";
- #clock-cells = <1>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,krait-cc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Clock Controller
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,krait-cc-v1
+ - qcom,krait-cc-v2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: Parent clock phandle for hfpll0
+ - description: Parent clock phandle for hfpll1
+ - description: Parent clock phandle for acpu0_aux
+ - description: Parent clock phandle for acpu1_aux
+ - description: Parent clock phandle for qsb
+
+ clock-names:
+ items:
+ - const: hfpll0
+ - const: hfpll1
+ - const: acpu0_aux
+ - const: acpu1_aux
+ - const: qsb
+
+required:
+ - compatible
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on Milos
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+ Qualcomm camera clock control module provides the clocks, resets and power
+ domains on Milos.
+
+ See also: include/dt-bindings/clock/qcom,milos-camcc.h
+
+properties:
+ compatible:
+ const: qcom,milos-camcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: Camera AHB clock from GCC
+
+required:
+ - compatible
+ - clocks
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,milos-gcc.h>
+ clock-controller@adb0000 {
+ compatible = "qcom,milos-camcc";
+ reg = <0x0adb0000 0x40000>;
+ clocks = <&bi_tcxo_div2>,
+ <&sleep_clk>,
+ <&gcc GCC_CAMERA_AHB_CLK>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on Milos
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+ Qualcomm display clock control module provides the clocks, resets and power
+ domains on Milos.
+
+ See also: include/dt-bindings/clock/qcom,milos-dispcc.h
+
+properties:
+ compatible:
+ const: qcom,milos-dispcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: Display's AHB clock
+ - description: GPLL0 source from GCC
+ - description: Byte clock from DSI PHY0
+ - description: Pixel clock from DSI PHY0
+ - description: Link clock from DP PHY0
+ - description: VCO DIV clock from DP PHY0
+
+required:
+ - compatible
+ - clocks
+ - '#power-domain-cells'
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,milos-gcc.h>
+ #include <dt-bindings/phy/phy-qcom-qmp.h>
+ clock-controller@af00000 {
+ compatible = "qcom,milos-dispcc";
+ reg = <0x0af00000 0x20000>;
+ clocks = <&bi_tcxo_div2>,
+ <&sleep_clk>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on Milos
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on Milos.
+
+ See also: include/dt-bindings/clock/qcom,milos-gcc.h
+
+properties:
+ compatible:
+ const: qcom,milos-gcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: PCIE 0 Pipe clock source
+ - description: PCIE 1 Pipe clock source
+ - description: UFS Phy Rx symbol 0 clock source
+ - description: UFS Phy Rx symbol 1 clock source
+ - description: UFS Phy Tx symbol 0 clock source
+ - description: USB3 Phy wrapper pipe clock source
+
+required:
+ - compatible
+ - clocks
+ - '#power-domain-cells'
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@100000 {
+ compatible = "qcom,milos-gcc";
+ reg = <0x00100000 0x1f4200>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <&pcie0_phy>,
+ <&pcie1_phy>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
+ <&usb_1_qmpphy>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,milos-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on Milos
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+ Qualcomm video clock control module provides the clocks, resets and power
+ domains on Milos.
+
+ See also: include/dt-bindings/clock/qcom,milos-videocc.h
+
+properties:
+ compatible:
+ const: qcom,milos-videocc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board active XO source
+ - description: Sleep clock source
+ - description: Video AHB clock from GCC
+
+required:
+ - compatible
+ - clocks
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,milos-gcc.h>
+ clock-controller@aaf0000 {
+ compatible = "qcom,milos-videocc";
+ reg = <0x0aaf0000 0x10000>;
+ clocks = <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>,
+ <&gcc GCC_VIDEO_AHB_CLK>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
minItems: 7
maxItems: 13
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
- reg:
- maxItems: 1
-
- protected-clocks:
- description:
- Protected clock specifier list as per common clock binding
-
vdd-gfx-supply:
description:
Regulator supply for the GPU_GX GDSC
required:
- compatible
- - reg
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
-
allOf:
+ - $ref: qcom,gcc.yaml#
- if:
properties:
compatible:
- const: dp_link_2x_clk_divsel_five
- const: dp_vco_divided_clk_src_mux
+unevaluatedProperties: false
+
examples:
# Example for MMCC for MSM8960:
- |
Qualcomm graphics clock control module provides the clocks, resets and power
domains on MSM8998.
- See also:: include/dt-bindings/clock/qcom,gpucc-msm8998.h
+ See also: include/dt-bindings/clock/qcom,gpucc-msm8998.h
properties:
compatible:
Qualcomm display clock control module provides the clocks, resets and power
domains on qcm2290.
- See also:: include/dt-bindings/clock/qcom,dispcc-qcm2290.h
+ See also: include/dt-bindings/clock/qcom,dispcc-qcm2290.h
properties:
compatible:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs615-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on QCS615
+
+maintainers:
+ - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+ Qualcomm display clock control module provides the clocks, resets and power
+ domains on QCS615.
+
+ See also: include/dt-bindings/clock/qcom,qcs615-dispcc.h
+
+properties:
+ compatible:
+ const: qcom,qcs615-dispcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 clock source from GCC
+ - description: Byte clock from DSI PHY0
+ - description: Pixel clock from DSI PHY0
+ - description: Pixel clock from DSI PHY1
+ - description: Display port PLL link clock
+ - description: Display port PLL VCO DIV clock
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+ clock-controller@af00000 {
+ compatible = "qcom,qcs615-dispcc";
+ reg = <0x0af00000 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dp_phy 0>,
+ <&mdss_dp_vco 0>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs615-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on QCS615
+
+maintainers:
+ - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+ Qualcomm graphics clock control module provides clocks, resets and power
+ domains on QCS615 Qualcomm SoCs.
+
+ See also: include/dt-bindings/clock/qcom,qcs615-gpucc.h
+
+properties:
+ compatible:
+ const: qcom,qcs615-gpucc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 main branch source
+ - description: GPLL0 GPUCC div branch source
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+
+ clock-controller@5090000 {
+ compatible = "qcom,qcs615-gpucc";
+ reg = <0x5090000 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GPLL0>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcs615-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on QCS615
+
+maintainers:
+ - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+ Qualcomm video clock control module provides clocks, resets and power
+ domains on QCS615 Qualcomm SoCs.
+
+ See also: include/dt-bindings/clock/qcom,qcs615-videocc.h
+
+properties:
+ compatible:
+ const: qcom,qcs615-videocc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+
+ clock-controller@ab00000 {
+ compatible = "qcom,qcs615-videocc";
+ reg = <0xab00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
Qualcomm ECPRI Specification V2.0 Common Public Radio Interface clock control
module which supports the clocks, resets on QDU1000 and QRU1000
- See also:: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h
+ See also: include/dt-bindings/clock/qcom,qdu1000-ecpricc.h
properties:
compatible:
Qualcomm global clock control module which supports the clocks, resets and
power domains on QDU1000 and QRU1000
- See also:: include/dt-bindings/clock/qcom,qdu1000-gcc.h
+ See also: include/dt-bindings/clock/qcom,qdu1000-gcc.h
properties:
compatible:
properties:
compatible:
enum:
+ - qcom,milos-rpmh-clk
- qcom,qcs615-rpmh-clk
- qcom,qdu1000-rpmh-clk
- qcom,sa8775p-rpmh-clk
See also:
include/dt-bindings/clock/qcom,qcs8300-camcc.h
include/dt-bindings/clock/qcom,sa8775p-camcc.h
+ include/dt-bindings/clock/qcom,sc8280xp-camcc.h
properties:
compatible:
enum:
- qcom,qcs8300-camcc
- qcom,sa8775p-camcc
+ - qcom,sc8280xp-camcc
clocks:
items:
maxItems: 1
description: MMCX power domain
+ required-opps:
+ description:
+ OPP node describing required MMCX performance point.
+ maxItems: 1
+
required:
- compatible
- clocks
allOf:
- $ref: qcom,gcc.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sc8280xp-camcc
+ then:
+ required:
+ - required-opps
unevaluatedProperties: false
Qualcomm global clock control module provides the clocks, resets and
power domains on sa8775p.
- See also:: include/dt-bindings/clock/qcom,sa8775p-gcc.h
+ See also: include/dt-bindings/clock/qcom,sa8775p-gcc.h
properties:
compatible:
Qualcomm camera clock control module provides the clocks, resets and power
domains on SC7180.
- See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
+ See also: include/dt-bindings/clock/qcom,camcc-sc7180.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm display clock control module provides the clocks, resets and power
domains on SC7180.
- See also:: include/dt-bindings/clock/qcom,dispcc-sc7180.h
+ See also: include/dt-bindings/clock/qcom,dispcc-sc7180.h
properties:
compatible:
Qualcomm LPASS core clock control module provides the clocks and power
domains on SC7180.
- See also:: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+ See also: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
properties:
compatible:
Qualcomm camera clock control module provides the clocks, resets and
power domains on SC7280.
- See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
+ See also: include/dt-bindings/clock/qcom,camcc-sc7280.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm display clock control module provides the clocks, resets and power
domains on SC7280.
- See also:: include/dt-bindings/clock/qcom,dispcc-sc7280.h
+ See also: include/dt-bindings/clock/qcom,dispcc-sc7280.h
properties:
compatible:
Qualcomm LPASS core clock control module provides the clocks and power
domains on SC7280.
- See also:: include/dt-bindings/clock/qcom,lpass-sc7280.h
+ See also: include/dt-bindings/clock/qcom,lpass-sc7280.h
properties:
compatible:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc8180x-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SC8180X
+
+maintainers:
+ - Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
+
+description: |
+ Qualcomm camera clock control module provides the clocks, resets and
+ power domains on SC8180X.
+
+ See also: include/dt-bindings/clock/qcom,sc8180x-camcc.h
+
+properties:
+ compatible:
+ const: qcom,sc8180x-camcc
+
+ clocks:
+ items:
+ - description: Camera AHB clock from GCC
+ - description: Board XO source
+ - description: Sleep clock source
+
+ power-domains:
+ maxItems: 1
+ description:
+ A phandle and PM domain specifier for the MMCX power domain.
+
+ required-opps:
+ maxItems: 1
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+
+required:
+ - compatible
+ - clocks
+ - power-domains
+ - required-opps
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ clock-controller@ad00000 {
+ compatible = "qcom,sc8180x-camcc";
+ reg = <0x0ad00000 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SC8180X_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
Qualcomm camera clock control module provides the clocks, resets and power
domains on SDM845.
- See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
+ See also: include/dt-bindings/clock/qcom,camcc-sm845.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm display clock control module provides the clocks, resets and power
domains on SDM845.
- See also:: include/dt-bindings/clock/qcom,dispcc-sdm845.h
+ See also: include/dt-bindings/clock/qcom,dispcc-sdm845.h
properties:
compatible:
description: |
Qualcomm SDM845 LPASS (Low Power Audio SubSystem) Clock Controller.
- See also:: include/dt-bindings/clock/qcom,lpass-sdm845.h
+ See also: include/dt-bindings/clock/qcom,lpass-sdm845.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SDX75
- See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h
+ See also: include/dt-bindings/clock/qcom,sdx75-gcc.h
properties:
compatible:
Qualcomm camera clock control module provides the clocks, resets and power
domains on SM4450
- See also:: include/dt-bindings/clock/qcom,sm4450-camcc.h
+ See also: include/dt-bindings/clock/qcom,sm4450-camcc.h
properties:
compatible:
const: qcom,sm4450-camcc
- reg:
- maxItems: 1
-
clocks:
items:
- description: Board XO source
- description: Camera AHB clock source from GCC
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
required:
- compatible
- - reg
- clocks
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
Qualcomm display clock control module provides the clocks, resets and power
domains on SM4450
- See also:: include/dt-bindings/clock/qcom,sm4450-dispcc.h
+ See also: include/dt-bindings/clock/qcom,sm4450-dispcc.h
properties:
compatible:
const: qcom,sm4450-dispcc
- reg:
- maxItems: 1
-
clocks:
items:
- description: Board XO source
- description: Byte clock from DSI PHY0
- description: Pixel clock from DSI PHY0
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
required:
- compatible
- - reg
- clocks
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
Qualcomm global clock control module provides the clocks, resets and power
domains on SM4450
- See also:: include/dt-bindings/clock/qcom,sm4450-gcc.h
+ See also: include/dt-bindings/clock/qcom,sm4450-gcc.h
properties:
compatible:
Qualcomm display clock control module provides the clocks and power domains
on SM6115.
- See also:: include/dt-bindings/clock/qcom,sm6115-dispcc.h
+ See also: include/dt-bindings/clock/qcom,sm6115-dispcc.h
properties:
compatible:
Qualcomm graphics clock control module provides clocks, resets and power
domains on Qualcomm SoCs.
- See also:: include/dt-bindings/clock/qcom,sm6115-gpucc.h
+ See also: include/dt-bindings/clock/qcom,sm6115-gpucc.h
properties:
compatible:
Qualcomm graphics clock control module provides clocks and power domains on
Qualcomm SoCs.
- See also:: include/dt-bindings/clock/qcom,sm6125-gpucc.h
+ See also: include/dt-bindings/clock/qcom,sm6125-gpucc.h
properties:
compatible:
maintainers:
- Konrad Dybcio <konradybcio@kernel.org>
+ - Taniya Das <quic_tdas@quicinc.com>
description: |
Qualcomm camera clock control module provides the clocks, resets and power
- domains on SM6350.
+ domains on SM6350 and QCS615 SoC.
- See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h
+ See also:
+ include/dt-bindings/clock/qcom,qcs615-camcc.h
+ include/dt-bindings/clock/qcom,sm6350-camcc.h
properties:
compatible:
- const: qcom,sm6350-camcc
+ enum:
+ - qcom,qcs615-camcc
+ - qcom,sm6350-camcc
clocks:
items:
Qualcomm display clock control module provides the clocks, resets and power
domains on SM6375.
- See also:: include/dt-bindings/clock/qcom,dispcc-sm6375.h
+ See also: include/dt-bindings/clock/qcom,dispcc-sm6375.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm global clock control module provides the clocks, resets and power
domains on SM6375
- See also:: include/dt-bindings/clock/qcom,sm6375-gcc.h
+ See also: include/dt-bindings/clock/qcom,sm6375-gcc.h
allOf:
- $ref: qcom,gcc.yaml#
Qualcomm graphics clock control module provides clocks, resets and power
domains on Qualcomm SoCs.
- See also:: include/dt-bindings/clock/qcom,sm6375-gpucc.h
+ See also: include/dt-bindings/clock/qcom,sm6375-gpucc.h
properties:
compatible:
Qualcomm camera clock control module provides the clocks, resets and power
domains on SM7150.
- See also:: include/dt-bindings/clock/qcom,sm7150-camcc.h
+ See also: include/dt-bindings/clock/qcom,sm7150-camcc.h
properties:
compatible:
Qualcomm display clock control module provides the clocks, resets and power
domains on SM7150.
- See also:: include/dt-bindings/clock/qcom,sm7150-dispcc.h
+ See also: include/dt-bindings/clock/qcom,sm7150-dispcc.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on SM7150
- See also:: include/dt-bindings/clock/qcom,sm7150-gcc.h
+ See also: include/dt-bindings/clock/qcom,sm7150-gcc.h
properties:
compatible:
Qualcomm video clock control module provides the clocks, resets and power
domains on SM7150.
- See also:: include/dt-bindings/clock/qcom,videocc-sm7150.h
+ See also: include/dt-bindings/clock/qcom,videocc-sm7150.h
properties:
compatible:
Qualcomm camera clock control module provides the clocks, resets and
power domains on SM8150.
- See also:: include/dt-bindings/clock/qcom,sm8150-camcc.h
+ See also: include/dt-bindings/clock/qcom,sm8150-camcc.h
properties:
compatible:
const: qcom,sm8150-camcc
- reg:
- maxItems: 1
-
clocks:
items:
- description: Board XO source
description:
A phandle to an OPP node describing required MMCX performance point.
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
- '#power-domain-cells':
- const: 1
-
required:
- compatible
- - reg
- clocks
- power-domains
- required-opps
- - '#clock-cells'
- - '#reset-cells'
- '#power-domain-cells'
-additionalProperties: false
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
examples:
- |
domains on SM8450.
See also:
- include/dt-bindings/clock/qcom,sc8280xp-camcc.h
include/dt-bindings/clock/qcom,sm8450-camcc.h
include/dt-bindings/clock/qcom,sm8550-camcc.h
include/dt-bindings/clock/qcom,sm8650-camcc.h
properties:
compatible:
enum:
- - qcom,sc8280xp-camcc
- qcom,sm8450-camcc
- qcom,sm8475-camcc
- qcom,sm8550-camcc
- description: Sleep clock source
power-domains:
- maxItems: 1
description:
- A phandle and PM domain specifier for the MMCX power domain.
+ Power domains required for the clock controller to operate
+ items:
+ - description: MMCX power domain
+ - description: MXC power domain
required-opps:
- maxItems: 1
description:
- A phandle to an OPP node describing required MMCX performance point.
+ OPP nodes that describe required performance points on power domains
+ items:
+ - description: MMCX performance point
+ - description: MXC performance point
reg:
maxItems: 1
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
Qualcomm display clock control module provides the clocks, resets and power
domains on SM8450.
- See also:: include/dt-bindings/clock/qcom,sm8450-dispcc.h
+ See also: include/dt-bindings/clock/qcom,sm8450-dispcc.h
properties:
compatible:
domains on Qualcomm SoCs.
See also::
+ include/dt-bindings/clock/qcom,milos-gpucc.h
include/dt-bindings/clock/qcom,sar2130p-gpucc.h
include/dt-bindings/clock/qcom,sm4450-gpucc.h
include/dt-bindings/clock/qcom,sm8450-gpucc.h
properties:
compatible:
enum:
+ - qcom,milos-gpucc
- qcom,sar2130p-gpucc
- qcom,sm4450-gpucc
- qcom,sm8450-gpucc
- qcom,sm8475-videocc
- qcom,sm8550-videocc
- qcom,sm8650-videocc
+ - qcom,x1e80100-videocc
clocks:
items:
- description: Video AHB clock from GCC
power-domains:
- maxItems: 1
description:
- MMCX power domain.
+ Power domains required for the clock controller to operate
+ items:
+ - description: MMCX power domain
+ - description: MXC power domain
required-opps:
- maxItems: 1
description:
- A phandle to an OPP node describing required MMCX performance point.
+ OPP nodes that describe required performance points on power domains
+ items:
+ - description: MMCX performance point
+ - description: MXC performance point
required:
- compatible
reg = <0x0aaf0000 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_VIDEO_AHB_CLK>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
Qualcomm global clock control module provides the clocks, resets and power
domains on SM8550
- See also:: include/dt-bindings/clock/qcom,sm8550-gcc.h
+ See also: include/dt-bindings/clock/qcom,sm8550-gcc.h
properties:
compatible:
compatible:
items:
- enum:
+ - qcom,milos-tcsr
- qcom,sar2130p-tcsr
- qcom,sm8550-tcsr
- qcom,sm8650-tcsr
Qualcomm global clock control module provides the clocks, resets and power
domains on SM8650
- See also:: include/dt-bindings/clock/qcom,sm8650-gcc.h
+ See also: include/dt-bindings/clock/qcom,sm8650-gcc.h
properties:
compatible:
Qualcomm global clock control module provides the clocks, resets and power
domains on X1E80100
- See also:: include/dt-bindings/clock/qcom,x1e80100-gcc.h
+ See also: include/dt-bindings/clock/qcom,x1e80100-gcc.h
properties:
compatible:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi RP1 clock generator
+
+maintainers:
+ - A. della Porta <andrea.porta@suse.com>
+
+description: |
+ The RP1 contains a clock generator designed as three PLLs (CORE, AUDIO,
+ VIDEO), and each PLL output can be programmed through dividers to generate
+ the clocks to drive the sub-peripherals embedded inside the chipset.
+
+ Link to datasheet:
+ https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf
+
+properties:
+ compatible:
+ const: raspberrypi,rp1-clocks
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+ description:
+ The available clocks are defined in
+ include/dt-bindings/clock/raspberrypi,rp1-clocks.h.
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+ rp1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks@c040018000 {
+ compatible = "raspberrypi,rp1-clocks";
+ reg = <0xc0 0x40018000 0x0 0x10038>;
+ #clock-cells = <1>;
+ clocks = <&clk_rp1_xosc>;
+ };
+ };
- renesas,r8a779f0-cpg-mssr # R-Car S4-8
- renesas,r8a779g0-cpg-mssr # R-Car V4H
- renesas,r8a779h0-cpg-mssr # R-Car V4M
+ - renesas,r9a09g077-cpg-mssr # RZ/T2H
+ - renesas,r9a09g087-cpg-mssr # RZ/N2H
reg:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: base address of register block 0
+ - description: base address of register block 1
+ description: base addresses of clock controller. Some controllers
+ (like r9a09g077) use two blocks instead of a single one.
clocks:
minItems: 1
the datasheet.
const: 1
-if:
- not:
- properties:
- compatible:
- items:
- enum:
- - renesas,r7s9210-cpg-mssr
-then:
- required:
- - '#reset-cells'
required:
- compatible
- '#clock-cells'
- '#power-domain-cells'
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r9a09g077-cpg-mssr
+ - renesas,r9a09g087-cpg-mssr
+ then:
+ properties:
+ reg:
+ minItems: 2
+ clock-names:
+ items:
+ - const: extal
+ else:
+ properties:
+ reg:
+ maxItems: 1
+ - if:
+ not:
+ properties:
+ compatible:
+ items:
+ enum:
+ - renesas,r7s9210-cpg-mssr
+ then:
+ required:
+ - '#reset-cells'
+
additionalProperties: false
examples:
can be power-managed through Module Standby should refer to the CPG device
node in their "power-domains" property, as documented by the generic PM
Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
- The power domain specifiers defined in <dt-bindings/clock/r9a0*-cpg.h> could
- be used to reference individual CPG power domains.
+ const: 0
'#reset-cells':
description:
additionalProperties: false
-allOf:
- - if:
- properties:
- compatible:
- contains:
- const: renesas,r9a08g045-cpg
- then:
- properties:
- '#power-domain-cells':
- const: 1
- else:
- properties:
- '#power-domain-cells':
- const: 0
-
examples:
- |
cpg: clock-controller@11010000 {
properties:
compatible:
enum:
- - samsung,exynosautov920-cmu-top
- samsung,exynosautov920-cmu-cpucl0
- samsung,exynosautov920-cmu-cpucl1
- samsung,exynosautov920-cmu-cpucl2
- - samsung,exynosautov920-cmu-peric0
- - samsung,exynosautov920-cmu-peric1
- - samsung,exynosautov920-cmu-misc
- samsung,exynosautov920-cmu-hsi0
- samsung,exynosautov920-cmu-hsi1
+ - samsung,exynosautov920-cmu-hsi2
+ - samsung,exynosautov920-cmu-misc
+ - samsung,exynosautov920-cmu-peric0
+ - samsung,exynosautov920-cmu-peric1
+ - samsung,exynosautov920-cmu-top
clocks:
minItems: 1
- maxItems: 4
+ maxItems: 5
clock-names:
minItems: 1
- maxItems: 4
+ maxItems: 5
"#clock-cells":
const: 1
- const: usbdrd
- const: mmc_card
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov920-cmu-hsi2
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (38.4 MHz)
+ - description: CMU_HSI2 NOC clock (from CMU_TOP)
+ - description: CMU_HSI2 NOC UFS clock (from CMU_TOP)
+ - description: CMU_HSI2 UFS EMBD clock (from CMU_TOP)
+ - description: CMU_HSI2 ETHERNET clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: noc
+ - const: ufs
+ - const: embd
+ - const: ethernet
+
required:
- compatible
- "#clock-cells"
+++ /dev/null
-Binding for Texas Instruments autoidle clock.
-
-This binding uses the common clock binding[1]. It assumes a register mapped
-clock which can be put to idle automatically by hardware based on the usage
-and a configuration bit setting. Autoidle clock is never an individual
-clock, it is always a derivative of some basic clock like a gate, divider,
-or fixed-factor.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- reg : offset for the register controlling the autoidle
-- ti,autoidle-shift : bit shift of the autoidle enable bit
-- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
-
-Examples:
- dpll_core_m4_ck: dpll_core_m4_ck {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll_core_x2_ck>;
- ti,max-div = <31>;
- ti,autoidle-shift = <8>;
- reg = <0x2d38>;
- ti,index-starts-at-one;
- ti,invert-autoidle-bit;
- };
-
- dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
- #clock-cells = <0>;
- compatible = "ti,fixed-factor-clock";
- clocks = <&dpll_usb_ck>;
- ti,clock-div = <1>;
- ti,autoidle-shift = <8>;
- reg = <0x01b4>;
- ti,clock-mult = <1>;
- ti,invert-autoidle-bit;
- };
+++ /dev/null
-Binding for TI fixed factor rate clock sources.
-
-This binding uses the common clock binding[1], and also uses the autoidle
-support from TI autoidle clock [2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
-
-Required properties:
-- compatible : shall be "ti,fixed-factor-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- ti,clock-div: fixed divider.
-- ti,clock-mult: fixed multiplier.
-- clocks: parent clock.
-
-Optional properties:
-- clock-output-names : from common clock binding.
-- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
- see [2]
-- reg: offset for the autoidle register of this clock, see [2]
-- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
-- ti,set-rate-parent: clk_set_rate is propagated to parent
-
-Example:
- clock {
- compatible = "ti,fixed-factor-clock";
- clocks = <&parentclk>;
- #clock-cells = <0>;
- ti,clock-div = <2>;
- ti,clock-mult = <1>;
- };
-
- dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
- #clock-cells = <0>;
- compatible = "ti,fixed-factor-clock";
- clocks = <&dpll_usb_ck>;
- ti,clock-div = <1>;
- ti,autoidle-shift = <8>;
- reg = <0x01b4>;
- ti,clock-mult = <1>;
- ti,invert-autoidle-bit;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,autoidle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI autoidle clock
+
+maintainers:
+ - Tero Kristo <kristo@kernel.org>
+ - Sukrut Bellary <sbellary@baylibre.com>
+
+description:
+ Some clocks in TI SoC support the autoidle feature. These properties are
+ applicable only if the clock supports autoidle feature. It assumes a register
+ mapped clock which can be put to idle automatically by hardware based on
+ usage and configuration bit setting. Autoidle clock is never an individual
+ clock, it is always a derivative of some basic clock like a gate, divider, or
+ fixed-factor.
+
+properties:
+ ti,autoidle-shift:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ bit shift of the autoidle enable bit for the clock
+ maximum: 31
+ default: 0
+
+ ti,invert-autoidle-bit:
+ type: boolean
+ description:
+ autoidle is enabled by setting the bit to 0
+
+additionalProperties: true
is missing it is the same as supplying a zero shift.
This binding can also optionally provide support to the hardware autoidle
- feature, see [1].
+ feature.
- [1] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+allOf:
+ - $ref: ti,autoidle.yaml#
properties:
compatible:
minimum: 1
default: 1
-
ti,max-div:
$ref: /schemas/types.yaml#/definitions/uint32
description:
valid divisor programming must be a power of two,
only valid if ti,dividers is not defined.
- ti,autoidle-shift:
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- bit shift of the autoidle enable bit for the clock,
- see [1].
- maximum: 31
- default: 0
-
- ti,invert-autoidle-bit:
- type: boolean
- description:
- autoidle is enabled by setting the bit to 0,
- see [1]
-
ti,set-rate-parent:
type: boolean
description:
- clocks
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,fixed-factor-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI fixed factor rate clock sources
+
+maintainers:
+ - Tero Kristo <kristo@kernel.org>
+ - Sukrut Bellary <sbellary@baylibre.com>
+
+description:
+ This consists of a divider and a multiplier used to generate a fixed rate
+ clock. This also uses the autoidle support from TI autoidle clock.
+
+allOf:
+ - $ref: ti,autoidle.yaml#
+
+properties:
+ compatible:
+ const: ti,fixed-factor-clock
+
+ "#clock-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ ti,clock-div:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Fixed divider
+ minimum: 1
+
+ ti,clock-mult:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Fixed multiplier
+ minimum: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ maxItems: 1
+
+ ti,set-rate-parent:
+ description:
+ Propagate to parent clock
+ type: boolean
+
+required:
+ - compatible
+ - clocks
+ - "#clock-cells"
+ - ti,clock-mult
+ - ti,clock-div
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus{
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock@1b4 {
+ compatible = "ti,fixed-factor-clock";
+ reg = <0x1b4>;
+ clocks = <&dpll_usb_ck>;
+ #clock-cells = <0>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <1>;
+ ti,autoidle-shift = <8>;
+ ti,invert-autoidle-bit;
+ };
+ };
+++ /dev/null
-Device Tree Clock bindings for APM X-Gene
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
- "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
- "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
- "apm,xgene-pmd-clock" - for a X-Gene PMD clock
- "apm,xgene-device-clock" - for a X-Gene device clock
- "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
- "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
-
-Required properties for SoC or PCP PLL clocks:
-- reg : shall be the physical PLL register address for the pll clock.
-- clocks : shall be the input parent clock phandle for the clock. This should
- be the reference clock.
-- #clock-cells : shall be set to 1.
-- clock-output-names : shall be the name of the PLL referenced by derive
- clock.
-Optional properties for PLL clocks:
-- clock-names : shall be the name of the PLL. If missing, use the device name.
-
-Required properties for PMD clocks:
-- reg : shall be the physical register address for the pmd clock.
-- clocks : shall be the input parent clock phandle for the clock.
-- #clock-cells : shall be set to 1.
-- clock-output-names : shall be the name of the clock referenced by derive
- clock.
-Optional properties for PLL clocks:
-- clock-names : shall be the name of the clock. If missing, use the device name.
-
-Required properties for device clocks:
-- reg : shall be a list of address and length pairs describing the CSR
- reset and/or the divider. Either may be omitted, but at least
- one must be present.
- - reg-names : shall be a string list describing the reg resource. This
- may include "csr-reg" and/or "div-reg". If this property
- is not present, the reg property is assumed to describe
- only "csr-reg".
-- clocks : shall be the input parent clock phandle for the clock.
-- #clock-cells : shall be set to 1.
-- clock-output-names : shall be the name of the device referenced.
-Optional properties for device clocks:
-- clock-names : shall be the name of the device clock. If missing, use the
- device name.
-- csr-offset : Offset to the CSR reset register from the reset address base.
- Default is 0.
-- csr-mask : CSR reset mask bit. Default is 0xF.
-- enable-offset : Offset to the enable register from the reset address base.
- Default is 0x8.
-- enable-mask : CSR enable mask bit. Default is 0xF.
-- divider-offset : Offset to the divider CSR register from the divider base.
- Default is 0x0.
-- divider-width : Width of the divider register. Default is 0.
-- divider-shift : Bit shift of the divider register. Default is 0.
-
-For example:
-
- pcppll: pcppll@17000100 {
- compatible = "apm,xgene-pcppll-clock";
- #clock-cells = <1>;
- clocks = <&refclk 0>;
- clock-names = "pcppll";
- reg = <0x0 0x17000100 0x0 0x1000>;
- clock-output-names = "pcppll";
- type = <0>;
- };
-
- pmd0clk: pmd0clk@7e200200 {
- compatible = "apm,xgene-pmd-clock";
- #clock-cells = <1>;
- clocks = <&pmdpll 0>;
- reg = <0x0 0x7e200200 0x0 0x10>;
- clock-output-names = "pmd0clk";
- };
-
- socpll: socpll@17000120 {
- compatible = "apm,xgene-socpll-clock";
- #clock-cells = <1>;
- clocks = <&refclk 0>;
- clock-names = "socpll";
- reg = <0x0 0x17000120 0x0 0x1000>;
- clock-output-names = "socpll";
- type = <1>;
- };
-
- qmlclk: qmlclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- clock-names = "qmlclk";
- reg = <0x0 0x1703C000 0x0 0x1000>;
- reg-name = "csr-reg";
- clock-output-names = "qmlclk";
- };
-
- ethclk: ethclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- clock-names = "ethclk";
- reg = <0x0 0x17000000 0x0 0x1000>;
- reg-names = "div-reg";
- divider-offset = <0x238>;
- divider-width = <0x9>;
- divider-shift = <0x0>;
- clock-output-names = "ethclk";
- };
-
- apbclk: apbclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&ahbclk 0>;
- clock-names = "apbclk";
- reg = <0x0 0x1F2AC000 0x0 0x1000
- 0x0 0x1F2AC000 0x0 0x1000>;
- reg-names = "csr-reg", "div-reg";
- csr-offset = <0x0>;
- csr-mask = <0x200>;
- enable-offset = <0x8>;
- enable-mask = <0x200>;
- divider-offset = <0x10>;
- divider-width = <0x2>;
- divider-shift = <0x0>;
- flags = <0x8>;
- clock-output-names = "apbclk";
- };
-
oneOf:
- const: atmel,at91sam9g46-aes
- items:
- - const: microchip,sam9x7-aes
+ - enum:
+ - microchip,sam9x7-aes
+ - microchip,sama7d65-aes
- const: atmel,at91sam9g46-aes
reg:
oneOf:
- const: atmel,at91sam9g46-sha
- items:
- - const: microchip,sam9x7-sha
+ - enum:
+ - microchip,sam9x7-sha
+ - microchip,sama7d65-sha
- const: atmel,at91sam9g46-sha
reg:
oneOf:
- const: atmel,at91sam9g46-tdes
- items:
- - const: microchip,sam9x7-tdes
+ - enum:
+ - microchip,sam9x7-tdes
+ - microchip,sama7d65-tdes
- const: atmel,at91sam9g46-tdes
reg:
- items:
- enum:
- fsl,imx6ul-caam
+ - fsl,imx8qm-caam
+ - fsl,imx8qxp-caam
- fsl,sec-v5.0
- const: fsl,sec-v4.0
- const: fsl,sec-v4.0
interrupts:
maxItems: 1
+ power-domains:
+ maxItems: 1
+
fsl,sec-era:
description: Defines the 'ERA' of the SEC device.
$ref: /schemas/types.yaml#/definitions/uint32
- const: fsl,sec-v5.0-job-ring
- const: fsl,sec-v4.0-job-ring
- items:
- - const: fsl,sec-v5.0-job-ring
+ - enum:
+ - fsl,imx8qm-job-ring
+ - fsl,imx8qxp-job-ring
+ - fsl,sec-v5.0-job-ring
- const: fsl,sec-v4.0-job-ring
- const: fsl,sec-v4.0-job-ring
interrupts:
maxItems: 1
+ power-domains:
+ maxItems: 1
+
fsl,liodn:
description:
Specifies the LIODN to be used in conjunction with the ppid-to-liodn
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- maximum: 0xfff
+ allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-job-ring
+ - fsl,imx8qxp-job-ring
+ then:
+ required:
+ - power-domains
+ else:
+ properties:
+ power-domains: false
'^rtic@[0-9a-f]+$':
type: object
- reg
- ranges
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-caam
+ - fsl,imx8qxp-caam
+then:
+ required:
+ - power-domains
+else:
+ properties:
+ power-domains: false
+
additionalProperties: false
examples:
+++ /dev/null
-OMAP SoC AES crypto Module
-
-Required properties:
-
-- compatible : Should contain entries for this and backward compatible
- AES versions:
- - "ti,omap2-aes" for OMAP2.
- - "ti,omap3-aes" for OMAP3.
- - "ti,omap4-aes" for OMAP4 and AM33XX.
- Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
- more algorithms) but they are incompatible with OMAP4.
-- ti,hwmods: Name of the hwmod associated with the AES module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt-specifier for the AES module.
-
-Optional properties:
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
-
-Example:
- /* AM335x */
- aes: aes@53500000 {
- compatible = "ti,omap4-aes";
- ti,hwmods = "aes";
- reg = <0x53500000 0xa0>;
- interrupts = <102>;
- dmas = <&edma 6>,
- <&edma 5>;
- dma-names = "tx", "rx";
- };
+++ /dev/null
-OMAP SoC DES crypto Module
-
-Required properties:
-
-- compatible : Should contain "ti,omap4-des"
-- ti,hwmods: Name of the hwmod associated with the DES module
-- reg : Offset and length of the register set for the module
-- interrupts : the interrupt-specifier for the DES module
-- clocks : A phandle to the functional clock node of the DES module
- corresponding to each entry in clock-names
-- clock-names : Name of the functional clock, should be "fck"
-
-Optional properties:
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
- Each entry corresponds to an entry in dma-names
-- dma-names: DMA request names should include "tx" and "rx" if present
-
-Example:
- /* DRA7xx SoC */
- des: des@480a5000 {
- compatible = "ti,omap4-des";
- ti,hwmods = "des";
- reg = <0x480a5000 0xa0>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma 117>, <&sdma 116>;
- dma-names = "tx", "rx";
- clocks = <&l3_iclk_div>;
- clock-names = "fck";
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,omap2-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP SoC AES crypto Module
+
+maintainers:
+ - Aaro Koskinen <aaro.koskinen@iki.fi>
+ - Andreas Kemnade <andreas@kemnade.info>
+ - Kevin Hilman <khilman@baylibre.com>
+ - Roger Quadros <rogerq@kernel.org>
+ - Tony Lindgren <tony@atomide.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,omap2-aes
+ - ti,omap3-aes
+ - ti,omap4-aes
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ ti,hwmods:
+ description: Name of the hwmod associated with the AES module
+ const: aes
+ deprecated: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ aes@53500000 {
+ compatible = "ti,omap4-aes";
+ reg = <0x53500000 0xa0>;
+ interrupts = <102>;
+ dmas = <&edma 6>,
+ <&edma 5>;
+ dma-names = "tx", "rx";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,omap4-des.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP4 DES crypto Module
+
+maintainers:
+ - Aaro Koskinen <aaro.koskinen@iki.fi>
+ - Andreas Kemnade <andreas@kemnade.info>
+ - Kevin Hilman <khilman@baylibre.com>
+ - Roger Quadros <rogerq@kernel.org>
+ - Tony Lindgren <tony@atomide.com>
+
+properties:
+ compatible:
+ const: ti,omap4-des
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: fck
+
+dependencies:
+ dmas: [ dma-names ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ des@480a5000 {
+ compatible = "ti,omap4-des";
+ reg = <0x480a5000 0xa0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ dmas = <&sdma 117>, <&sdma 116>;
+ dma-names = "tx", "rx";
+ };
- allwinner,sun50i-a64-de2-mixer-0
- allwinner,sun50i-a64-de2-mixer-1
- allwinner,sun50i-h6-de3-mixer-0
+ - allwinner,sun50i-h616-de33-mixer-0
- reg:
- maxItems: 1
+ reg: true
+
+ reg-names: true
clocks:
items:
required:
- port@1
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun50i-h616-de33-mixer-0
+ then:
+ properties:
+ reg:
+ description: |
+ Registers for controlling individual layers of the display
+ engine (layers), global control (top), and display blending
+ control (display). Names are from Allwinner BSP kernel.
+ maxItems: 3
+ reg-names:
+ items:
+ - const: layers
+ - const: top
+ - const: display
+ required:
+ - reg-names
+
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
required:
- compatible
- reg
If not present, the memory interface is fast enough to handle all
possible video modes.
+ resets:
+ maxItems: 1
+
port:
$ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
+++ /dev/null
-Device Tree bindings for Freescale DCU DRM Driver
-
-Required properties:
-- compatible: Should be one of
- * "fsl,ls1021a-dcu".
- * "fsl,vf610-dcu".
-
-- reg: Address and length of the register set for dcu.
-- clocks: Handle to "dcu" and "pix" clock (in the order below)
- This can be the same clock (e.g. LS1021a)
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Should be "dcu" and "pix"
- See ../clocks/clock-bindings.txt for details.
-- big-endian Boolean property, LS1021A DCU registers are big-endian.
-- port Video port for the panel output
-
-Optional properties:
-- fsl,tcon: The phandle to the timing controller node.
-
-Examples:
-dcu: dcu@2ce0000 {
- compatible = "fsl,ls1021a-dcu";
- reg = <0x0 0x2ce0000 0x0 0x10000>;
- clocks = <&platform_clk 0>, <&platform_clk 0>;
- clock-names = "dcu", "pix";
- big-endian;
- fsl,tcon = <&tcon>;
-
- port {
- dcu_out: endpoint {
- remote-endpoint = <&panel_out>;
- };
- };
-};
$ref: /schemas/graph.yaml#/properties/port
description: The LCDIF output port
+ display:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to display panel
+ deprecated: true
+
+ display0:
+ $ref: panel/panel-common.yaml#
+ deprecated: true
+
+ lcd-supply:
+ deprecated: true
+
required:
- compatible
- reg
- clocks
- interrupts
- - port
additionalProperties: false
properties:
dmas: false
dma-names: false
+ display: false
+ display0: false
+ lcd-supply: false
+
+ required:
+ - port
examples:
- |
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,ls1021a-dcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DCU DRM Driver
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls1021a-dcu
+ - fsl,vf610-dcu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: dcu
+ - const: pix
+
+ big-endian: true
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for the panel output
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ fsl,tcon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle to the timing controller node.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ display-controller@2ce0000 {
+ compatible = "fsl,ls1021a-dcu";
+ reg = <0x2ce0000 0x10000>;
+ clocks = <&platform_clk 0>, <&platform_clk 0>;
+ clock-names = "dcu", "pix";
+ big-endian;
+ fsl,tcon = <&tcon>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&panel_out>;
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/himax,hx8357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8357D display panel
+
+description:
+ Display panels using a Himax HX8357D controller in SPI
+ mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - adafruit,yx350hv15
+ - himax,hx8357b
+ - const: himax,hx8357
+ - items:
+ - enum:
+ - himax,hx8369a
+ - const: himax,hx8369
+
+ reg:
+ maxItems: 1
+
+ dc-gpios:
+ maxItems: 1
+ description: D/C pin
+
+ rotation:
+ enum: [0, 90, 180, 270]
+
+ backlight:
+ description:
+ phandle of the backlight device attached to the panel
+
+ im-gpios:
+ maxItems: 3
+
+ reset-gpios:
+ maxItems: 1
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "adafruit,yx350hv15", "himax,hx8357";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ rotation = <90>;
+ backlight = <&backlight>;
+ };
+ };
+++ /dev/null
-Himax HX8357D display panels
-
-This binding is for display panels using a Himax HX8357D controller in SPI
-mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
-
-Required properties:
-- compatible: "adafruit,yx350hv15", "himax,hx8357d"
-- dc-gpios: D/C pin
-- reg: address of the panel on the SPI bus
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
- display@0{
- compatible = "adafruit,yx350hv15", "himax,hx8357d";
- reg = <0>;
- spi-max-frequency = <32000000>;
- dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
- rotation = <90>;
- backlight = <&backlight>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller AXI Performance Counter
+
+description: |
+ Performance counters are provided to allow measurement of average bandwidth
+ and latency during operation. The following features are supported:
+
+ * Manual and timer controlled measurement mode.
+
+ * Measurement counters:
+ - GLOBAL_COUNTER for overall measurement time
+ - BUSY_COUNTER for number of data bus busy cycles
+ - DATA_COUNTER for number of data transfer cycles
+ - TRANSFER_COUNTER for number of transfers
+ - ADDRBUSY_COUNTER for number of address bus busy cycles
+ - LATENCY_COUNTER for average latency
+
+ * Counter overflow detection.
+
+ * Outstanding Transfer Counters (OTC) which are used for latency measurement
+ have to run immediately after reset, but can be disabled by software when
+ there is no need for latency measurement.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-axi-performance-counter
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+
+ pmu@5618f000 {
+ compatible = "fsl,imx8qxp-dc-axi-performance-counter";
+ reg = <0x5618f000 0x90>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blit-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Blit Engine
+
+description: |
+ A blit operation (block based image transfer) reads up to 3 source images
+ from memory and computes one destination image from it, which is written
+ back to memory. The following basic operations are supported:
+
+ * Buffer Fill
+ Fills a buffer with constant color
+
+ * Buffer Copy
+ Copies one source to a destination buffer.
+
+ * Image Blend
+ Combines two source images by a blending equation and writes result to
+ destination (which can be one of the sources).
+
+ * Image Rop2/3
+ Combines up to three source images by a logical equation (raster operation)
+ and writes result to destination (which can be one of the sources).
+
+ * Image Flip
+ Mirrors the source image in horizontal and/or vertical direction.
+
+ * Format Convert
+ Convert between the supported color and buffer formats.
+
+ * Color Transform
+ Modify colors by linear or non-linear transformations.
+
+ * Image Scale
+ Changes size of the source image.
+
+ * Image Rotate
+ Rotates the source image by any angle.
+
+ * Image Filter
+ Performs an FIR filter operation on the source image.
+
+ * Image Warp
+ Performs a re-sampling of the source image with any pattern. The sample
+ point positions are read from a compressed coordinate buffer.
+
+ * Buffer Pack
+ Writes an image with color components stored in up to three different
+ buffers (planar formats) into a single buffer (packed format).
+
+ * Chroma Resample
+ Converts between different YUV formats that differ in chroma sampling rate
+ (4:4:4, 4:2:2, 4:2:0).
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-blit-engine
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^blitblend@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-blitblend
+
+ "^clut@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-clut
+
+ "^fetchdecode@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetchdecode
+
+ "^fetcheco@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetcheco
+
+ "^fetchwarp@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetchwarp
+
+ "^filter@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-filter
+
+ "^hscaler@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-hscaler
+
+ "^matrix@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-matrix
+
+ "^rop@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-rop
+
+ "^store@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-store
+
+ "^vscaler@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-vscaler
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ blit-engine@56180820 {
+ compatible = "fsl,imx8qxp-dc-blit-engine";
+ reg = <0x56180820 0x13c>, <0x56181000 0x3400>;
+ reg-names = "pec", "cfg";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ fetchdecode@56180820 {
+ compatible = "fsl,imx8qxp-dc-fetchdecode";
+ reg = <0x56180820 0x10>, <0x56181000 0x404>;
+ reg-names = "pec", "cfg";
+ };
+
+ store@56180940 {
+ compatible = "fsl,imx8qxp-dc-store";
+ reg = <0x56180940 0x1c>, <0x56184000 0x5c>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <0>, <1>, <2>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blitblend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Blit Blend Unit
+
+description:
+ Combines two input frames to a single output frame, all frames having the
+ same dimension.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-blitblend
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ blitblend@56180920 {
+ compatible = "fsl,imx8qxp-dc-blitblend";
+ reg = <0x56180920 0x10>, <0x56183c00 0x3c>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-clut.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Color Lookup Table
+
+description: |
+ The unit implements 3 look-up tables with 256 x 10 bit entries each. These
+ can be used for different kinds of applications. From 10-bit input values
+ only upper 8 bits are used.
+
+ The unit supports color lookup, index lookup, dithering and alpha masking.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-clut
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ clut@56180880 {
+ compatible = "fsl,imx8qxp-dc-clut";
+ reg = <0x56180880 0x10>, <0x56182400 0x404>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Command Sequencer
+
+description: |
+ The Command Sequencer is designed to autonomously process command lists.
+ By that it can load setups into the DC configuration and synchronize to
+ hardware events. This releases a system's CPU from workload, because it
+ does not need to wait for certain events. Also it simplifies SW architecture,
+ because no interrupt handlers are required. Setups are read via AXI bus,
+ while write access to configuration registers occurs directly via an internal
+ bus. This saves bandwidth for the AXI interconnect and improves the system
+ architecture in terms of safety aspects.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-command-sequencer
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 5
+
+ interrupt-names:
+ items:
+ - const: error
+ - const: sw0
+ - const: sw1
+ - const: sw2
+ - const: sw3
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle pointing to the mmio-sram device node
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+
+ command-sequencer@56180400 {
+ compatible = "fsl,imx8qxp-dc-command-sequencer";
+ reg = <0x56180400 0x1a4>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <36>, <37>, <38>, <39>, <40>;
+ interrupt-names = "error", "sw0", "sw1", "sw2", "sw3";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-constframe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Constant Frame
+
+description: |
+ The Constant Frame unit is used instead of a Fetch unit where generation of
+ constant color frames only is sufficient. This is the case for the background
+ planes of content and safety streams in a Display Controller.
+
+ The color can be setup to any RGBA value.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-constframe
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ constframe@56180960 {
+ compatible = "fsl,imx8qxp-dc-constframe";
+ reg = <0x56180960 0xc>, <0x56184400 0x20>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-display-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Display Engine
+
+description:
+ All Processing Units that operate in a display clock domain. Pixel pipeline
+ is driven by a video timing and cannot be stalled. Implements all display
+ specific processing.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-display-engine
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: top
+ - const: cfg
+
+ resets:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: shdload
+ - const: framecomplete
+ - const: seqcomplete
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^dither@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-dither
+
+ "^framegen@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-framegen
+
+ "^gammacor@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-gammacor
+
+ "^matrix@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-matrix
+
+ "^signature@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-signature
+
+ "^tcon@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-tcon
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - power-domains
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ display-engine@5618b400 {
+ compatible = "fsl,imx8qxp-dc-display-engine";
+ reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>;
+ reg-names = "top", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <15>, <16>, <17>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ power-domains = <&pd IMX_SC_R_DC_0_PLL_0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framegen@5618b800 {
+ compatible = "fsl,imx8qxp-dc-framegen";
+ reg = <0x5618b800 0x98>;
+ clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>;
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <18>, <19>, <20>, <21>, <41>, <42>, <43>, <44>;
+ interrupt-names = "int0", "int1", "int2", "int3",
+ "primsync_on", "primsync_off",
+ "secsync_on", "secsync_off";
+ };
+
+ tcon@5618c800 {
+ compatible = "fsl,imx8qxp-dc-tcon";
+ reg = <0x5618c800 0x588>;
+
+ port {
+ dc0_disp0_dc0_pixel_combiner_ch0: endpoint {
+ remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>;
+ };
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Dither Unit
+
+description: |
+ The unit can increase the physical color resolution of a display from 5, 6, 7
+ or 8 bits per RGB channel to a virtual resolution of 10 bits. The physical
+ resolution can be set individually for each channel.
+
+ The resolution is increased by mixing the two physical colors that are nearest
+ to the virtual color code in a variable ratio either by time (temporal
+ dithering) or by position (spatial dithering).
+
+ An optimized algorithm for temporal dithering minimizes noise artifacts on the
+ output image.
+
+ The dither operation can be individually enabled or disabled for each pixel
+ using the alpha input bit.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-dither
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ dither@5618c400 {
+ compatible = "fsl,imx8qxp-dc-dither";
+ reg = <0x5618c400 0x14>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-extdst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller External Destination Interface
+
+description: |
+ The External Destination unit is the interface between the internal pixel
+ processing pipeline of the Pixel Engine, which is 30-bit RGB plus 8-bit Alpha,
+ and a Display Engine.
+
+ It comprises the following built-in Gamma apply function.
+
+ +------X-----------------------+
+ | | ExtDst Unit |
+ | V |
+ | +-------+ |
+ | | Gamma | |
+ | +-------+ |
+ | | |
+ | V +
+ +------X-----------------------+
+
+ The output format is 24-bit RGB plus 1-bit Alpha. Conversion from 10 to 8
+ bits is done by LSBit truncation. Alpha output bit is 1 for input 255, 0
+ otherwise.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-extdst
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: shdload
+ - const: framecomplete
+ - const: seqcomplete
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ extdst@56180980 {
+ compatible = "fsl,imx8qxp-dc-extdst";
+ reg = <0x56180980 0x1c>, <0x56184800 0x28>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <3>, <4>, <5>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-fetchunit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Fetch Unit
+
+description: |
+ The Fetch Unit is the interface between the AXI bus for source buffer access
+ and the internal pixel processing pipeline, which is 30-bit RGB plus 8-bit
+ Alpha.
+
+ It is used to generate foreground planes in Display Controllers and source
+ planes in Blit Engines, and comprises the following built-in functions to
+ convert a wide range of frame buffer types.
+
+ +---------X-----------------------------------------+
+ | | Fetch Unit |
+ | V |
+ | +---------+ |
+ | | | |
+ | | Decode | Decompression [Decode] |
+ | | | |
+ | +---------+ |
+ | | |
+ | V |
+ | +---------+ |
+ | | Clip & | Clip Window [All] |
+ | | Overlay | Plane composition [Layer, Warp] |
+ | | | |
+ | +---------+ |
+ | | |
+ | V |
+ | +---------+ |
+ | | Re- | Flip/Rotate/Repl./Drop [All] |
+ X--> | sample | Perspective/Affine warping [Persp] |
+ | | | | Arbitrary warping [Warp, Persp] |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | |
+ | | | Palette | Color Palette [Layer, Decode] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | Extract | Raw to RGBA/YUV [All] |
+ | | | & | Bit width expansion [All] |
+ | | | Expand | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | Planar to packed |
+ | |->| Combine | [Decode, Warp, Persp] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | YUV422 to YUV444 |
+ | | | Chroma | [Decode, Persp] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | YUV to RGB |
+ | | | Color | [Warp, Persp, Decode, Layer] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | Gamma removal |
+ | | | Gamma | [Warp, Persp, Decode, Layer] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | Alpla multiply, RGB pre-multiply |
+ | ->| Multiply| [Warp, Persp, Decode, Layer] |
+ | | | |
+ | --------- |
+ | | |
+ | V |
+ | +---------+ |
+ | | | Bilinear filter |
+ | | Filter | [Warp, Persp] |
+ | | | |
+ | +---------+ |
+ | | |
+ | V |
+ +---------X-----------------------------------------+
+
+ Note that different derivatives of the Fetch Unit exist. Each implements a
+ specific subset only of the pipeline stages shown above. Restrictions for the
+ units are specified in [square brackets].
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-dc-fetchdecode
+ - fsl,imx8qxp-dc-fetcheco
+ - fsl,imx8qxp-dc-fetchlayer
+ - fsl,imx8qxp-dc-fetchwarp
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ fsl,prg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Optional Prefetch Resolve Gasket associated with the Fetch Unit.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ fetchlayer@56180ac0 {
+ compatible = "fsl,imx8qxp-dc-fetchlayer";
+ reg = <0x56180ac0 0xc>, <0x56188400 0x404>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-filter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Filter Unit
+
+description: |
+ 5x5 FIR filter with 25 programmable coefficients.
+
+ Typical applications are image blurring, sharpening or support for edge
+ detection algorithms.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-filter
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ filter@56180900 {
+ compatible = "fsl,imx8qxp-dc-filter";
+ reg = <0x56180900 0x10>, <0x56183800 0x30>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-framegen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Frame Generator
+
+description:
+ The Frame Generator (FrameGen) module generates a programmable video timing
+ and optionally allows to synchronize the generated video timing to external
+ synchronization signals.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-framegen
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: int0
+ - const: int1
+ - const: int2
+ - const: int3
+ - const: primsync_on
+ - const: primsync_off
+ - const: secsync_on
+ - const: secsync_off
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ framegen@5618b800 {
+ compatible = "fsl,imx8qxp-dc-framegen";
+ reg = <0x5618b800 0x98>;
+ clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>;
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <18>, <19>, <20>, <21>, <41>, <42>, <43>, <44>;
+ interrupt-names = "int0", "int1", "int2", "int3",
+ "primsync_on", "primsync_off",
+ "secsync_on", "secsync_off";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-gammacor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Gamma Correction Unit
+
+description: The unit supports non-linear color transformation.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-gammacor
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ gammacor@5618c000 {
+ compatible = "fsl,imx8qxp-dc-gammacor";
+ reg = <0x5618c000 0x20>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-layerblend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Layer Blend Unit
+
+description: Combines two input frames to a single output frame.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-layerblend
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ layerblend@56180ba0 {
+ compatible = "fsl,imx8qxp-dc-layerblend";
+ reg = <0x56180ba0 0x10>, <0x5618a400 0x20>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-matrix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Color Matrix
+
+description:
+ The unit supports linear color transformation, alpha pre-multiply and
+ alpha masking.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-matrix
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ reg-names:
+ oneOf:
+ - const: cfg # matrix in display engine
+ - items: # matrix in pixel engine
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ matrix@5618bc00 {
+ compatible = "fsl,imx8qxp-dc-matrix";
+ reg = <0x5618bc00 0x3c>;
+ reg-names = "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Pixel Engine
+
+description:
+ All Processing Units that operate in the AXI bus clock domain. Pixel
+ pipelines have the ability to stall when a destination is busy. Implements
+ all communication to memory resources and most of the image processing
+ functions. Interconnection of Processing Units is re-configurable.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-pixel-engine
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^blit-engine@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-blit-engine
+
+ "^constframe@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-constframe
+
+ "^extdst@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-extdst
+
+ "^fetchdecode@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetchdecode
+
+ "^fetcheco@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetcheco
+
+ "^fetchlayer@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetchlayer
+
+ "^fetchwarp@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetchwarp
+
+ "^hscaler@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-hscaler
+
+ "^layerblend@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-layerblend
+
+ "^matrix@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-matrix
+
+ "^safety@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-safety
+
+ "^vscaler@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-vscaler
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+
+ pixel-engine@56180800 {
+ compatible = "fsl,imx8qxp-dc-pixel-engine";
+ reg = <0x56180800 0xac00>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ constframe@56180960 {
+ compatible = "fsl,imx8qxp-dc-constframe";
+ reg = <0x56180960 0xc>, <0x56184400 0x20>;
+ reg-names = "pec", "cfg";
+ };
+
+ extdst@56180980 {
+ compatible = "fsl,imx8qxp-dc-extdst";
+ reg = <0x56180980 0x1c>, <0x56184800 0x28>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <3>, <4>, <5>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ };
+
+ constframe@561809a0 {
+ compatible = "fsl,imx8qxp-dc-constframe";
+ reg = <0x561809a0 0xc>, <0x56184c00 0x20>;
+ reg-names = "pec", "cfg";
+ };
+
+ extdst@561809c0 {
+ compatible = "fsl,imx8qxp-dc-extdst";
+ reg = <0x561809c0 0x1c>, <0x56185000 0x28>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <6>, <7>, <8>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ };
+
+ constframe@561809e0 {
+ compatible = "fsl,imx8qxp-dc-constframe";
+ reg = <0x561809e0 0xc>, <0x56185400 0x20>;
+ reg-names = "pec", "cfg";
+ };
+
+ extdst@56180a00 {
+ compatible = "fsl,imx8qxp-dc-extdst";
+ reg = <0x56180a00 0x1c>, <0x56185800 0x28>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <9>, <10>, <11>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ };
+
+ constframe@56180a20 {
+ compatible = "fsl,imx8qxp-dc-constframe";
+ reg = <0x56180a20 0xc>, <0x56185c00 0x20>;
+ reg-names = "pec", "cfg";
+ };
+
+ extdst@56180a40 {
+ compatible = "fsl,imx8qxp-dc-extdst";
+ reg = <0x56180a40 0x1c>, <0x56186000 0x28>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <12>, <13>, <14>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ };
+
+ fetchwarp@56180a60 {
+ compatible = "fsl,imx8qxp-dc-fetchwarp";
+ reg = <0x56180a60 0x10>, <0x56186400 0x190>;
+ reg-names = "pec", "cfg";
+ };
+
+ fetchlayer@56180ac0 {
+ compatible = "fsl,imx8qxp-dc-fetchlayer";
+ reg = <0x56180ac0 0xc>, <0x56188400 0x404>;
+ reg-names = "pec", "cfg";
+ };
+
+ layerblend@56180ba0 {
+ compatible = "fsl,imx8qxp-dc-layerblend";
+ reg = <0x56180ba0 0x10>, <0x5618a400 0x20>;
+ reg-names = "pec", "cfg";
+ };
+
+ layerblend@56180bc0 {
+ compatible = "fsl,imx8qxp-dc-layerblend";
+ reg = <0x56180bc0 0x10>, <0x5618a800 0x20>;
+ reg-names = "pec", "cfg";
+ };
+
+ layerblend@56180be0 {
+ compatible = "fsl,imx8qxp-dc-layerblend";
+ reg = <0x56180be0 0x10>, <0x5618ac00 0x20>;
+ reg-names = "pec", "cfg";
+ };
+
+ layerblend@56180c00 {
+ compatible = "fsl,imx8qxp-dc-layerblend";
+ reg = <0x56180c00 0x10>, <0x5618b000 0x20>;
+ reg-names = "pec", "cfg";
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-rop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Raster Operation Unit
+
+description: |
+ The unit can combine up to three input frames to a single output frame, all
+ having the same dimension.
+
+ The unit supports logic operations, arithmetic operations and packing.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-rop
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ rop@56180860 {
+ compatible = "fsl,imx8qxp-dc-rop";
+ reg = <0x56180860 0x10>, <0x56182000 0x20>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-safety.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Safety Unit
+
+description:
+ The unit allows corresponding processing units to be configured in a path
+ leading to multiple endpoints.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-safety
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ safety@56180800 {
+ compatible = "fsl,imx8qxp-dc-safety";
+ reg = <0x56180800 0x1c>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Scaling Engine
+
+description: |
+ The unit can change the dimension of the input frame by nearest or linear
+ re-sampling with 1/32 sub pixel precision.
+
+ Internally it consist of two independent blocks for horizontal and vertical
+ scaling. The sequence of both operations is arbitrary.
+
+ Any frame dimensions between 1 and 16384 pixels in width and height are
+ supported, except that the vertical scaler has a frame width maximum
+ depending of the system's functional limitations.
+
+ In general all scale factors are supported inside the supported frame
+ dimensions. In range of scale factors 1/16..16 the filtered output colors
+ are LSBit precise (e.g. DC ripple free).
+
+ +-----------+
+ | Line |
+ | Buffer |
+ +-----------+
+ ^
+ |
+ V
+ |\ +-----------+
+ ------+ | | |
+ | | +-->| Vertical |----
+ | ----+ | | Scaler | |
+ | | |/ +-----------+ |
+ | | |
+ | | |
+ | | | |\
+ | ------------- -------------+-----+ |
+ Input --+ X | +--> Output
+ | ------------- -------------+-----+ |
+ | | | |/
+ | | |
+ | | |\ +-----------+ |
+ | ----+ | | | |
+ | | +-->| Horizontal|----
+ ------+ | | Scaler |
+ |/ +-----------+
+
+ The unit supports downscaling, upscaling, sub pixel translation and bob
+ de-interlacing.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-dc-hscaler
+ - fsl,imx8qxp-dc-vscaler
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ hscaler@561808c0 {
+ compatible = "fsl,imx8qxp-dc-hscaler";
+ reg = <0x561808c0 0x10>, <0x56183000 0x18>;
+ reg-names = "pec", "cfg";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-signature.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Signature Unit
+
+description: |
+ In order to control the correctness of display output, signature values can
+ be computed for each frame and compared against reference values. In case of
+ a mismatch (signature violation) a HW event can be triggered, for example a
+ SW interrupt.
+
+ This unit supports signature computation, reference check, evaluation windows,
+ alpha masking and panic modes.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-signature
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: shdload
+ - const: valid
+ - const: error
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ signature@5618d000 {
+ compatible = "fsl,imx8qxp-dc-signature";
+ reg = <0x5618d000 0x140>;
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <22>, <23>, <24>;
+ interrupt-names = "shdload", "valid", "error";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-store.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Store Unit
+
+description: |
+ The Store unit is the interface between the internal pixel processing
+ pipeline, which is 30-bit RGB plus 8-bit Alpha, and the AXI bus for
+ destination buffer access. It is used for the destination of Blit Engines.
+ It comprises a set of built-in functions to generate a wide range of buffer
+ formats. Note, that these are exactly inverse to corresponding functions in
+ the Fetch Unit.
+
+ +------X-------------------------+
+ | | Store Unit |
+ | V |
+ | +-------+ |
+ | | Gamma | Gamma apply |
+ | +-------+ |
+ | | |
+ | V |
+ | +-------+ |
+ | | Color | RGB to YUV |
+ | +-------+ |
+ | | |
+ | V |
+ | +-------+ |
+ | | Chroma| YUV444 to 422 |
+ | +-------+ |
+ | | |
+ | V |
+ | +-------+ |
+ | | Reduce| Bit width reduction |
+ | | | dithering |
+ | +-------+ |
+ | | |
+ | V |
+ | +-------+ |
+ | | Pack | RGBA/YUV to RAW |
+ | | Encode| or Compression |
+ | +-------+ |
+ | | |
+ | V |
+ +------X-------------------------+
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-store
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: shdload
+ - const: framecomplete
+ - const: seqcomplete
+
+ fsl,lts:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Optional Linear Tile Store associated with the Store Unit.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ store@56180940 {
+ compatible = "fsl,imx8qxp-dc-store";
+ reg = <0x56180940 0x1c>, <0x56184000 0x5c>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <0>, <1>, <2>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Timing Controller
+
+description:
+ The TCon can generate a wide range of customized synchronization signals and
+ does the mapping of the color bits to the output.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-tcon
+
+ reg:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: video output
+
+required:
+ - compatible
+ - reg
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ tcon@5618c800 {
+ compatible = "fsl,imx8qxp-dc-tcon";
+ reg = <0x5618c800 0x588>;
+
+ port {
+ dc0_disp0_dc0_pixel_combiner_ch0: endpoint {
+ remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>;
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller
+
+description: |
+ The Freescale i.MX8qxp Display Controller(DC) is comprised of three main
+ components that include a blit engine for 2D graphics accelerations, display
+ controller for display output processing, as well as a command sequencer.
+
+ Display buffers Source buffers
+ (AXI read master) (AXI read master)
+ | .......... | | | |
+ +---------------------------+------------+------------------+-+-+------+
+ | Display Controller (DC) | .......... | | | | |
+ | | | | | | |
+ | @@@@@@@@@@@ +----------+------------+------------+ | | | |
+ A | | Command | | V V | | | | |
+ X <-+->| Sequencer | | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | V V V |
+ I | | (AXI CLK) | | | | | @@@@@@@@@@ |
+ | @@@@@@@@@@@ | | Pixel Engine | | | | |
+ | | | | (AXI CLK) | | | | |
+ | V | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | | | |
+ A | *********** | | | | | | | Blit | |
+ H <-+->| Configure | | V V V V | | Engine | |
+ B | | (CFG CLK) | | 00000000000 11111111111 | | (AXI CLK)| |
+ | *********** | | Display | | Display | | | | |
+ | | | Engine | | Engine | | | | |
+ | | | (Disp CLK)| | (Disp CLK)| | | | |
+ | @@@@@@@@@@@ | 00000000000 11111111111 | @@@@@@@@@@ |
+ I | | Common | | | | | | |
+ R <-+--| Control | | | Display | | | |
+ Q | | (AXI CLK) | | | Controller | | | |
+ | @@@@@@@@@@@ +------------------------------------+ | |
+ | | | ^ | |
+ +--------------------------+----------------+-------+---------+--------+
+ ^ | | | |
+ | V V | V
+ Clocks & Resets Display Display Panic Destination
+ Output0 Output1 Control buffer
+ (AXI write master)
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: axi
+ - const: cfg
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^command-sequencer@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-command-sequencer
+
+ "^display-engine@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-display-engine
+
+ "^interrupt-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-intc
+
+ "^pixel-engine@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-pixel-engine
+
+ "^pmu@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: fsl,imx8qxp-dc-axi-performance-counter
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ display-controller@56180000 {
+ compatible = "fsl,imx8qxp-dc";
+ reg = <0x56180000 0x40000>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_4>;
+ power-domains = <&pd IMX_SC_R_DC_0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-controller@56180040 {
+ compatible = "fsl,imx8qxp-dc-intc";
+ reg = <0x56180040 0x60>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ interrupt-controller;
+ interrupt-parent = <&dc0_irqsteer>;
+ #interrupt-cells = <1>;
+ interrupts = <448>, <449>, <450>, <64>,
+ <65>, <66>, <67>, <68>,
+ <69>, <70>, <193>, <194>,
+ <195>, <196>, <197>, <72>,
+ <73>, <74>, <75>, <76>,
+ <77>, <78>, <79>, <80>,
+ <81>, <199>, <200>, <201>,
+ <202>, <203>, <204>, <205>,
+ <206>, <207>, <208>, <5>,
+ <0>, <1>, <2>, <3>,
+ <4>, <82>, <83>, <84>,
+ <85>, <209>, <210>, <211>,
+ <212>;
+ interrupt-names = "store9_shdload",
+ "store9_framecomplete",
+ "store9_seqcomplete",
+ "extdst0_shdload",
+ "extdst0_framecomplete",
+ "extdst0_seqcomplete",
+ "extdst4_shdload",
+ "extdst4_framecomplete",
+ "extdst4_seqcomplete",
+ "extdst1_shdload",
+ "extdst1_framecomplete",
+ "extdst1_seqcomplete",
+ "extdst5_shdload",
+ "extdst5_framecomplete",
+ "extdst5_seqcomplete",
+ "disengcfg_shdload0",
+ "disengcfg_framecomplete0",
+ "disengcfg_seqcomplete0",
+ "framegen0_int0",
+ "framegen0_int1",
+ "framegen0_int2",
+ "framegen0_int3",
+ "sig0_shdload",
+ "sig0_valid",
+ "sig0_error",
+ "disengcfg_shdload1",
+ "disengcfg_framecomplete1",
+ "disengcfg_seqcomplete1",
+ "framegen1_int0",
+ "framegen1_int1",
+ "framegen1_int2",
+ "framegen1_int3",
+ "sig1_shdload",
+ "sig1_valid",
+ "sig1_error",
+ "reserved",
+ "cmdseq_error",
+ "comctrl_sw0",
+ "comctrl_sw1",
+ "comctrl_sw2",
+ "comctrl_sw3",
+ "framegen0_primsync_on",
+ "framegen0_primsync_off",
+ "framegen0_secsync_on",
+ "framegen0_secsync_off",
+ "framegen1_primsync_on",
+ "framegen1_primsync_off",
+ "framegen1_secsync_on",
+ "framegen1_secsync_off";
+ };
+
+ pixel-engine@56180800 {
+ compatible = "fsl,imx8qxp-dc-pixel-engine";
+ reg = <0x56180800 0xac00>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ display-engine@5618b400 {
+ compatible = "fsl,imx8qxp-dc-display-engine";
+ reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>;
+ reg-names = "top", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <15>, <16>, <17>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ power-domains = <&pd IMX_SC_R_DC_0_PLL_0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+ };
'#sound-dai-cells':
const: 0
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
- qcom,sm8450-dp
- qcom,sm8550-dp
- const: qcom,sm8350-dp
+ - items:
+ - enum:
+ - qcom,sm8750-dp
+ - const: qcom,sm8650-dp
reg:
minItems: 4
- qcom,sm8450-dsi-ctrl
- qcom,sm8550-dsi-ctrl
- qcom,sm8650-dsi-ctrl
+ - qcom,sm8750-dsi-ctrl
- const: qcom,mdss-dsi-ctrl
- enum:
- qcom,dsi-ctrl-6g-qcm2290
- mnoc:: MNOC clock
- pixel:: Display pixel clock.
minItems: 3
- maxItems: 9
+ maxItems: 12
clock-names:
minItems: 3
- maxItems: 9
+ maxItems: 12
phys:
maxItems: 1
minItems: 2
maxItems: 4
description: |
- Parents of "byte" and "pixel" for the given platform.
+ For DSI on SM8650 and older: parents of "byte" and "pixel" for the given
+ platform.
For DSIv2 platforms this should contain "byte", "esc", "src" and
"pixel_src" clocks.
- clocks
- clock-names
- phys
- - assigned-clocks
- - assigned-clock-parents
- ports
allOf:
- const: byte
- const: pixel
- const: core
+ required:
+ - assigned-clocks
+ - assigned-clock-parents
- if:
properties:
- const: byte
- const: pixel
- const: core
+ required:
+ - assigned-clocks
+ - assigned-clock-parents
- if:
properties:
- const: pixel
- const: core
- const: core_mmss
+ required:
+ - assigned-clocks
+ - assigned-clock-parents
- if:
properties:
- const: core_mmss
- const: pixel
- const: core
+ required:
+ - assigned-clocks
+ - assigned-clock-parents
- if:
properties:
- const: core
- const: iface
- const: bus
+ required:
+ - assigned-clocks
+ - assigned-clock-parents
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8750-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ minItems: 12
+ maxItems: 12
+ clock-names:
+ items:
+ - const: byte
+ - const: byte_intf
+ - const: pixel
+ - const: core
+ - const: iface
+ - const: bus
+ - const: dsi_pll_pixel
+ - const: dsi_pll_byte
+ - const: esync
+ - const: osc
+ - const: byte_src
+ - const: pixel_src
- if:
properties:
- const: core_mmss
- const: pixel
- const: core
+ required:
+ - assigned-clocks
+ - assigned-clock-parents
unevaluatedProperties: false
- qcom,sm8450-dsi-phy-5nm
- qcom,sm8550-dsi-phy-4nm
- qcom,sm8650-dsi-phy-4nm
+ - qcom,sm8750-dsi-phy-3nm
reg:
items:
- const: bus
- const: core
- const: vsync
- - const: lut
- const: tbu
- const: tbu_rt
# MSM8996 has additional iommu clock
enum:
- qcom,sa8775p-dpu
- qcom,sm8650-dpu
+ - qcom,sm8750-dpu
- qcom,x1e80100-dpu
reg:
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8750-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8750 Display MDSS
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8750-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ items:
+ - description: Interconnect path from mdp0 port to the data bus
+ - description: Interconnect path from CPU to the reg bus
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: cpu-cfg
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm8750-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ const: qcom,sm8750-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ const: qcom,sm8750-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,sm8750-dsi-phy-3nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy-qcom-qmp.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8750-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&disp_cc_mdss_mdp_clk>;
+
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
+
+ resets = <&disp_cc_mdss_core_bcr>;
+
+ power-domains = <&mdss_gdsc>;
+
+ iommus = <&apps_smmu 0x800 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8750-dpu";
+ reg = <0x0ae01000 0x93000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc_disp_hf_axi_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&disp_cc_mdss_mdp_lut_clk>,
+ <&disp_cc_mdss_mdp_clk>,
+ <&disp_cc_mdss_vsync_clk>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&disp_cc_mdss_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-207000000 {
+ opp-hz = /bits/ 64 <207000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-337000000 {
+ opp-hz = /bits/ 64 <337000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-417000000 {
+ opp-hz = /bits/ 64 <417000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-532000000 {
+ opp-hz = /bits/ 64 <532000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_nom_l1>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 4>;
+
+ clocks = <&disp_cc_mdss_byte0_clk>,
+ <&disp_cc_mdss_byte0_intf_clk>,
+ <&disp_cc_mdss_pclk0_clk>,
+ <&disp_cc_mdss_esc0_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&disp_cc_esync0_clk>,
+ <&disp_cc_osc_clk>,
+ <&disp_cc_mdss_byte0_clk_src>,
+ <&disp_cc_mdss_pclk0_clk_src>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus",
+ "dsi_pll_pixel",
+ "dsi_pll_byte",
+ "esync",
+ "osc",
+ "byte_src",
+ "pixel_src";
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ vdda-supply = <&vreg_l3g_1p2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae95000 {
+ compatible = "qcom,sm8750-dsi-phy-3nm";
+ reg = <0x0ae95000 0x200>,
+ <0x0ae95200 0x280>,
+ <0x0ae95500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ vdds-supply = <&vreg_l3i_0p88>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 5>;
+
+ clocks = <&disp_cc_mdss_byte1_clk>,
+ <&disp_cc_mdss_byte1_intf_clk>,
+ <&disp_cc_mdss_pclk1_clk>,
+ <&disp_cc_mdss_esc1_clk>,
+ <&disp_cc_mdss_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&mdss_dsi1_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&disp_cc_esync1_clk>,
+ <&disp_cc_osc_clk>,
+ <&disp_cc_mdss_byte1_clk_src>,
+ <&disp_cc_mdss_pclk1_clk_src>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus",
+ "dsi_pll_pixel",
+ "dsi_pll_byte",
+ "esync",
+ "osc",
+ "byte_src",
+ "pixel_src";
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae97000 {
+ compatible = "qcom,sm8750-dsi-phy-3nm";
+ reg = <0x0ae97000 0x200>,
+ <0x0ae97200 0x280>,
+ <0x0ae97500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+
+ displayport-controller@af54000 {
+ compatible = "qcom,sm8750-dp", "qcom,sm8650-dp";
+ reg = <0xaf54000 0x104>,
+ <0xaf54200 0xc0>,
+ <0xaf55000 0x770>,
+ <0xaf56000 0x9c>,
+ <0xaf57000 0x9c>;
+
+ interrupts-extended = <&mdss 12>;
+
+ clocks = <&disp_cc_mdss_ahb_clk>,
+ <&disp_cc_mdss_dptx0_aux_clk>,
+ <&disp_cc_mdss_dptx0_link_clk>,
+ <&disp_cc_mdss_dptx0_link_intf_clk>,
+ <&disp_cc_mdss_dptx0_pixel0_clk>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&disp_cc_mdss_dptx0_link_clk_src>,
+ <&disp_cc_mdss_dptx0_pixel0_clk_src>;
+ assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&dp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+ };
+ };
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112B-based DSI display panels
+
+maintainers:
+ - Luca Weiss <luca@lucaweiss.eu>
+
+description:
+ The Himax HX83112B is a generic DSI Panel IC used to control
+ LCD panels.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ contains:
+ const: djn,98-03057-6598b-i
+
+ reg:
+ maxItems: 1
+
+ iovcc-supply:
+ description: I/O voltage rail
+
+ vsn-supply:
+ description: Positive source voltage rail
+
+ vsp-supply:
+ description: Negative source voltage rail
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - iovcc-supply
+ - vsn-supply
+ - vsp-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "djn,98-03057-6598b-i";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+ iovcc-supply = <&pm8953_l6>;
+ vsn-supply = <&pmi632_lcdb_ncp>;
+ vsp-supply = <&pmi632_lcdb_ldo>;
+
+ port {
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+...
properties:
compatible:
- items:
- - enum:
- - hannstar,hsd060bhw4
- - microchip,ac40t08a-mipi-panel
- - powkiddy,x55-panel
- - const: himax,hx8394
+ oneOf:
+ - items:
+ - enum:
+ - hannstar,hsd060bhw4
+ - microchip,ac40t08a-mipi-panel
+ - powkiddy,x55-panel
+ - const: himax,hx8394
+ - items:
+ - enum:
+ - huiling,hl055fhav028c
+ - const: himax,hx8399c
reg:
maxItems: 1
- ampire,am8001280g
- bananapi,lhr050h41
- feixin,k101-im2byl02
+ - raspberrypi,dsi-7inch
- startek,kd050hdfia020
- tdo,tl050hdv35
- wanchanglong,w552946aba
- auo,g121ean01
# AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
- auo,g156xtn01
+ # AU Optronics Corporation 23.8" FHD (1920x1080) TFT LCD panel
+ - auo,p238han01
# AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
- auo,p320hvn03
# AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
- compatible
- port
- reg
- - reset-gpios
additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/renesas,r61307.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R61307 based DSI Display Panel
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+ The Renesas R61307 is a generic DSI Panel IC used to control LCD panels.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # KOE/HITACHI TX13D100VM0EAA 5.0" XGA TFT LCD panel
+ - hit,tx13d100vm0eaa
+ - koe,tx13d100vm0eaa
+ - const: renesas,r61307
+
+ reg:
+ maxItems: 1
+
+ vcc-supply:
+ description: Regulator for main power supply.
+
+ iovcc-supply:
+ description: Regulator for 1.8V IO power supply.
+
+ backlight: true
+
+ renesas,gamma:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ 0 - disabled
+ 1-3 - gamma setting A presets
+ enum: [0, 1, 2, 3]
+
+ renesas,column-inversion:
+ type: boolean
+ description: switch between line and column inversion. The line
+ inversion is set by default.
+
+ renesas,contrast:
+ type: boolean
+ description: digital contrast adjustment
+
+ reset-gpios: true
+ port: true
+
+required:
+ - compatible
+ - port
+ - backlight
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@1 {
+ compatible = "koe,tx13d100vm0eaa", "renesas,r61307";
+ reg = <1>;
+
+ reset-gpios = <&gpio 176 GPIO_ACTIVE_LOW>;
+
+ renesas,gamma = <3>;
+ renesas,column-inversion;
+ renesas,contrast;
+
+ vcc-supply = <&vcc_3v0_lcd>;
+ iovcc-supply = <&iovcc_1v8_lcd>;
+
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/renesas,r69328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R69328 based DSI Display Panel
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+ The Renesas R69328 is a generic DSI Panel IC used to control LCD panels.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # JDI DX12D100VM0EAA 4.7" WXGA TFT LCD panel
+ - jdi,dx12d100vm0eaa
+ - const: renesas,r69328
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator for main power supply.
+
+ vddio-supply:
+ description: Regulator for 1.8V IO power supply.
+
+ backlight: true
+
+ reset-gpios: true
+ port: true
+
+required:
+ - compatible
+ - port
+ - backlight
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@1 {
+ compatible = "jdi,dx12d100vm0eaa", "renesas,r69328";
+ reg = <1>;
+
+ reset-gpios = <&gpio 176 GPIO_ACTIVE_LOW>;
+
+ vdd-supply = <&vdd_3v0_lcd>;
+ vddio-supply = <&vdd_1v8_io>;
+
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+...
- const: samsung,atna33xc20
- items:
- enum:
+ # Samsung 13" 3K (2880×1920 pixels) eDP AMOLED panel
+ - samsung,atna30dw01
# Samsung 14" WQXGA+ (2880×1800 pixels) eDP AMOLED panel
- samsung,atna40yk20
# Samsung 14.5" WQXGA+ (2880x1800 pixels) eDP AMOLED panel
- densitron,dmt028vghmcmi-1a
- elida,kd50t048a
- techstar,ts8550b
+ - winstar,wf40eswaa6mnn0
- const: sitronix,st7701
reg:
properties:
compatible:
- const: visionox,rm69299-1080p-display
+ enum:
+ - visionox,rm69299-1080p-display
+ - visionox,rm69299-shift
reg:
maxItems: 1
- enum:
- renesas,r9a07g043u-du # RZ/G2UL
- renesas,r9a07g044-du # RZ/G2{L,LC}
+ - renesas,r9a09g057-du # RZ/V2H(P)
- items:
- enum:
- renesas,r9a07g054-du # RZ/V2L
required:
- port@0
- else:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a07g044-du
+ then:
properties:
ports:
properties:
required:
- port@0
- port@1
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a09g057-du
+ then:
+ properties:
+ ports:
+ properties:
+ port@0:
+ description: DSI
+ port@1: false
+
+ required:
+ - port@0
examples:
# RZ/G2L DU
power-domains:
maxItems: 1
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
required:
- compatible
- clocks
- description: Pixel clock for video port 0.
- description: Pixel clock for video port 1.
- description: Pixel clock for video port 2.
- - description: Pixel clock for video port 3.
- - description: Peripheral(vop grf/dsi) clock.
- - description: Alternative pixel clock provided by HDMI0 PHY PLL.
- - description: Alternative pixel clock provided by HDMI1 PHY PLL.
+ - {}
+ - {}
+ - {}
+ - {}
clock-names:
minItems: 5
- const: dclk_vp0
- const: dclk_vp1
- const: dclk_vp2
- - const: dclk_vp3
- - const: pclk_vop
- - const: pll_hdmiphy0
- - const: pll_hdmiphy1
+ - {}
+ - {}
+ - {}
+ - {}
rockchip,grf:
$ref: /schemas/types.yaml#/definitions/phandle
then:
properties:
clocks:
- maxItems: 5
+ minItems: 5
+ items:
+ - {}
+ - {}
+ - {}
+ - {}
+ - {}
+ - description: Alternative pixel clock provided by HDMI PHY PLL.
clock-names:
- maxItems: 5
+ minItems: 5
+ items:
+ - {}
+ - {}
+ - {}
+ - {}
+ - {}
+ - const: pll_hdmiphy0
interrupts:
minItems: 4
properties:
clocks:
minItems: 7
- maxItems: 9
+ items:
+ - {}
+ - {}
+ - {}
+ - {}
+ - {}
+ - description: Pixel clock for video port 3.
+ - description: Peripheral(vop grf/dsi) clock.
+ - description: Alternative pixel clock provided by HDMI0 PHY PLL.
+ - description: Alternative pixel clock provided by HDMI1 PHY PLL.
clock-names:
minItems: 7
- maxItems: 9
+ items:
+ - {}
+ - {}
+ - {}
+ - {}
+ - {}
+ - const: dclk_vp3
+ - const: pclk_vop
+ - const: pll_hdmiphy0
+ - const: pll_hdmiphy1
interrupts:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7567.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7567 Display Controller
+
+maintainers:
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+ Sitronix ST7567 is a driver and controller for monochrome
+ dot matrix LCD panels.
+
+allOf:
+ - $ref: panel/panel-common.yaml#
+
+properties:
+ compatible:
+ const: sitronix,st7567
+
+ reg:
+ maxItems: 1
+
+ width-mm: true
+ height-mm: true
+ panel-timing: true
+
+required:
+ - compatible
+ - reg
+ - width-mm
+ - height-mm
+ - panel-timing
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@3f {
+ compatible = "sitronix,st7567";
+ reg = <0x3f>;
+ width-mm = <37>;
+ height-mm = <27>;
+
+ panel-timing {
+ hactive = <128>;
+ vactive = <64>;
+ hback-porch = <0>;
+ vback-porch = <0>;
+ clock-frequency = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ };
+ };
+ };
+++ /dev/null
-Sitronix ST7586 display panel
-
-Required properties:
-- compatible: "lego,ev3-lcd".
-- a0-gpios: The A0 signal (since this binding is for serial mode, this is
- the pin labeled D1 on the controller, not the pin labeled A0)
-- reset-gpios: Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
-
-Example:
- display@0{
- compatible = "lego,ev3-lcd";
- reg = <0>;
- spi-max-frequency = <10000000>;
- a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7586.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7586 Display Controller
+
+maintainers:
+ - David Lechner <david@lechnology.com>
+
+description:
+ Sitronix ST7586 is a driver and controller for 4-level gray
+ scale and monochrome dot matrix LCD panels.
+ https://topwaydisplay.com/sites/default/files/2020-04/ST7586S.pdf
+
+$ref: panel/panel-common.yaml#
+
+additionalProperties: false
+
+properties:
+ compatible:
+ const: lego,ev3-lcd
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 50000000
+
+ a0-gpios:
+ description:
+ The A0 signal (for serial mode, this is the pin labeled D1 on the
+ controller, not the pin labeled A0)
+ maxItems: 1
+
+ reset-gpios: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - a0-gpios
+ - reset-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "lego,ev3-lcd";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+ };
+ };
maxItems: 1
clocks:
- minItems: 2
+ maxItems: 2
clock-names:
items:
maxItems: 2
clocks:
- minItems: 1
+ maxItems: 1
clock-names:
items:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,am625-oldi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM625 OLDI Transmitter
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+ - Aradhya Bhatia <aradhya.bhatia@linux.dev>
+
+description:
+ The AM625 TI Keystone OpenLDI transmitter (OLDI TX) supports serialized RGB
+ pixel data transmission between host and flat panel display over LVDS (Low
+ Voltage Differential Sampling) interface. The OLDI TX consists of 7-to-1 data
+ serializers, and 4-data and 1-clock LVDS outputs. It supports the LVDS output
+ formats "jeida-18", "jeida-24" and "vesa-18", and can accept 24-bit RGB or
+ padded and un-padded 18-bit RGB bus formats as input.
+
+properties:
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: serial clock input for the OLDI transmitters
+
+ clock-names:
+ const: serial
+
+ ti,companion-oldi:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to companion OLDI transmitter. This property is required for both
+ the OLDI TXes if they are expected to work either in dual-lvds mode or in
+ clone mode. This property should point to the other OLDI TX's phandle.
+
+ ti,secondary-oldi:
+ type: boolean
+ description:
+ Boolean property to mark the OLDI transmitter as the secondary one, when the
+ OLDI hardware is expected to run as a companion HW, in cases of dual-lvds
+ mode or clone mode. The primary OLDI hardware is responsible for all the
+ hardware configuration.
+
+ ti,oldi-io-ctrl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to syscon device node mapping OLDI IO_CTRL registers found in the
+ control MMR region. These registers are required to toggle the I/O lane
+ power, and control its electrical characteristics.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel RGB input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: LVDS output port
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - reg
+ - clocks
+ - clock-names
+ - ti,oldi-io-ctrl
+ - ports
+
+additionalProperties: false
+
+...
- Tomi Valkeinen <tomi.valkeinen@ti.com>
description: |
- The AM625 and AM65x TI Keystone Display SubSystem with two output
+ The AM625 and AM65x TI Keystone Display SubSystem has two output
ports and two video planes. In AM65x DSS, the first video port
supports 1 OLDI TX and in AM625 DSS, the first video port output is
internally routed to 2 OLDI TXes. The second video port supports DPI
format. The first plane is full video plane with all features and the
second is a "lite plane" without scaling support.
+ The AM62L display subsystem has a single output port which supports DPI
+ format but it only supports single video "lite plane" which does not support
+ scaling. The output port is routed to SoC boundary via DPI interface and same
+ DPI signals are also routed internally to DSI Tx controller present within the
+ SoC. Due to clocking limitations only one of the interface i.e. either DSI or
+ DPI can be used at once.
properties:
compatible:
enum:
- ti,am625-dss
- ti,am62a7-dss
+ - ti,am62l-dss
- ti,am65x-dss
reg:
For AM625 DSS, the internal DPI output port node from video
port 1.
For AM62A7 DSS, the port is tied off inside the SoC.
+ For AM62L DSS, the DSS DPI output port node from video port 1
+ or DSI Tx controller node connected to video port 1.
+ properties:
+ endpoint@0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description:
+ For AM625 DSS, VP Connection to OLDI0.
+ For AM65X DSS, OLDI output from the SoC.
+
+ endpoint@1:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description:
+ For AM625 DSS, VP Connection to OLDI1.
+
+ anyOf:
+ - required:
+ - endpoint
+ - required:
+ - endpoint@0
+ - endpoint@1
port@1:
$ref: /schemas/graph.yaml#/properties/port
Input memory (from main memory to dispc) bandwidth limit in
bytes per second
+ oldi-transmitters:
+ description:
+ Child node under the DSS, to describe all the OLDI transmitters connected
+ to the DSS videoports.
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ '^oldi@[0-1]$':
+ $ref: ti,am625-oldi.yaml#
+ description: OLDI transmitters connected to the DSS VPs
+
allOf:
- if:
properties:
const: ti,am62a7-dss
then:
properties:
+ oldi-transmitters: false
ports:
properties:
port@0: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am62l-dss
+ then:
+ properties:
+ ports:
+ properties:
+ port@1: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,am62l-dss
+ - ti,am65x-dss
+ then:
+ properties:
+ oldi-transmitters: false
+ ports:
+ properties:
+ port@0:
+ properties:
+ endpoint@1: false
required:
- compatible
#include <dt-bindings/soc/ti,sci_pm_domain.h>
dss: dss@4a00000 {
- compatible = "ti,am65x-dss";
- reg = <0x04a00000 0x1000>, /* common */
- <0x04a02000 0x1000>, /* vidl1 */
- <0x04a06000 0x1000>, /* vid */
- <0x04a07000 0x1000>, /* ovr1 */
- <0x04a08000 0x1000>, /* ovr2 */
- <0x04a0a000 0x1000>, /* vp1 */
- <0x04a0b000 0x1000>, /* vp2 */
- <0x04a01000 0x1000>; /* common1 */
+ compatible = "ti,am65x-dss";
+ reg = <0x04a00000 0x1000>, /* common */
+ <0x04a02000 0x1000>, /* vidl1 */
+ <0x04a06000 0x1000>, /* vid */
+ <0x04a07000 0x1000>, /* ovr1 */
+ <0x04a08000 0x1000>, /* ovr2 */
+ <0x04a0a000 0x1000>, /* vp1 */
+ <0x04a0b000 0x1000>, /* vp2 */
+ <0x04a01000 0x1000>; /* common1 */
+ reg-names = "common", "vidl1", "vid",
+ "ovr1", "ovr2", "vp1", "vp2", "common1";
+ ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+ power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 67 1>,
+ <&k3_clks 216 1>,
+ <&k3_clks 67 2>;
+ clock-names = "fck", "vp1", "vp2";
+ interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ oldi_out0: endpoint {
+ remote-endpoint = <&lcd_in0>;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dss1: dss@30200000 {
+ compatible = "ti,am625-dss";
+ reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+ <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+ <0x00 0x30206000 0x00 0x1000>, /* vid */
+ <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+ <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+ <0x00 0x3020a000 0x00 0x1000>, /* vp1 */
+ <0x00 0x3020b000 0x00 0x1000>, /* vp2 */
+ <0x00 0x30201000 0x00 0x1000>; /* common1 */
reg-names = "common", "vidl1", "vid",
- "ovr1", "ovr2", "vp1", "vp2", "common1";
- ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
- power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 67 1>,
- <&k3_clks 216 1>,
- <&k3_clks 67 2>;
+ "ovr1", "ovr2", "vp1", "vp2", "common1";
+ power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 186 6>,
+ <&vp1_clock>,
+ <&k3_clks 186 2>;
clock-names = "fck", "vp1", "vp2";
- interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ oldi-transmitters {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ oldi0: oldi@0 {
+ reg = <0>;
+ clocks = <&k3_clks 186 0>;
+ clock-names = "serial";
+ ti,companion-oldi = <&oldi1>;
+ ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ oldi0_in: endpoint {
+ remote-endpoint = <&dpi0_out0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ oldi0_out: endpoint {
+ remote-endpoint = <&panel_in0>;
+ };
+ };
+ };
+ };
+ oldi1: oldi@1 {
+ reg = <1>;
+ clocks = <&k3_clks 186 0>;
+ clock-names = "serial";
+ ti,secondary-oldi;
+ ti,companion-oldi = <&oldi0>;
+ ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ oldi1_in: endpoint {
+ remote-endpoint = <&dpi0_out1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ oldi1_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+ };
+ };
+ };
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
- oldi_out0: endpoint {
- remote-endpoint = <&lcd_in0>;
- };
+ reg = <0>;
+ dpi0_out0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&oldi0_in>;
+ };
+ dpi0_out1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&oldi1_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ dpi1_out: endpoint {
+ remote-endpoint = <&hdmi_bridge>;
};
+ };
};
+ };
};
+++ /dev/null
-* Broadcom SBA RAID engine
-
-Required properties:
-- compatible: Should be one of the following
- "brcm,iproc-sba"
- "brcm,iproc-sba-v2"
- The "brcm,iproc-sba" has support for only 6 PQ coefficients
- The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
-- mboxes: List of phandle and mailbox channel specifiers
-
-Example:
-
-raid_mbox: mbox@67400000 {
- ...
- #mbox-cells = <3>;
- ...
-};
-
-raid0 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 0 0x1 0xffff>,
- <&raid_mbox 1 0x1 0xffff>,
- <&raid_mbox 2 0x1 0xffff>,
- <&raid_mbox 3 0x1 0xffff>,
- <&raid_mbox 4 0x1 0xffff>,
- <&raid_mbox 5 0x1 0xffff>,
- <&raid_mbox 6 0x1 0xffff>,
- <&raid_mbox 7 0x1 0xffff>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/brcm,iproc-sba.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SBA RAID engine
+
+maintainers:
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+properties:
+ compatible:
+ enum:
+ - brcm,iproc-sba
+ - brcm,iproc-sba-v2
+
+ mboxes:
+ minItems: 1
+ maxItems: 8
+
+required:
+ - compatible
+ - mboxes
+
+additionalProperties: false
+
+examples:
+ - |
+ raid0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xffff>,
+ <&raid_mbox 1 0x1 0xffff>,
+ <&raid_mbox 2 0x1 0xffff>,
+ <&raid_mbox 3 0x1 0xffff>,
+ <&raid_mbox 4 0x1 0xffff>,
+ <&raid_mbox 5 0x1 0xffff>,
+ <&raid_mbox 6 0x1 0xffff>,
+ <&raid_mbox 7 0x1 0xffff>;
+ };
properties:
power-domains: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx23-dma-apbx
+ then:
+ properties:
+ interrupt-names:
+ items:
+ - const: audio-adc
+ - const: audio-dac
+ - const: spdif-tx
+ - const: i2c
+ - const: saif0
+ - const: empty0
+ - const: auart0-rx
+ - const: auart0-tx
+ - const: auart1-rx
+ - const: auart1-tx
+ - const: saif1
+ - const: empty1
+ - const: empty2
+ - const: empty3
+ - const: empty4
+ - const: empty5
+ else:
+ properties:
+ interrupt-names: false
+
properties:
compatible:
oneOf:
minItems: 4
maxItems: 16
+ interrupt-names:
+ minItems: 4
+ maxItems: 16
+
"#dma-cells":
const: 1
+++ /dev/null
-NXP LPC18xx/43xx DMA MUX (DMA request router)
-
-Required properties:
-- compatible: "nxp,lpc1850-dmamux"
-- reg: Memory map for accessing module
-- #dma-cells: Should be set to <3>.
- * 1st cell contain the master dma request signal
- * 2nd cell contain the mux value (0-3) for the peripheral
- * 3rd cell contain either 1 or 2 depending on the AHB
- master used.
-- dma-requests: Number of DMA requests for the mux
-- dma-masters: phandle pointing to the DMA controller
-
-The DMA controller node need to have the following poroperties:
-- dma-requests: Number of DMA requests the controller can handle
-
-Example:
-
-dmac: dma@40002000 {
- compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
- arm,primecell-periphid = <0x00041080>;
- reg = <0x40002000 0x1000>;
- interrupts = <2>;
- clocks = <&ccu1 CLK_CPU_DMA>;
- clock-names = "apb_pclk";
- #dma-cells = <2>;
- dma-channels = <8>;
- dma-requests = <16>;
- lli-bus-interface-ahb1;
- lli-bus-interface-ahb2;
- mem-bus-interface-ahb1;
- mem-bus-interface-ahb2;
- memcpy-burst-size = <256>;
- memcpy-bus-width = <32>;
-};
-
-dmamux: dma-mux {
- compatible = "nxp,lpc1850-dmamux";
- #dma-cells = <3>;
- dma-requests = <64>;
- dma-masters = <&dmac>;
-};
-
-uart0: serial@40081000 {
- compatible = "nxp,lpc1850-uart", "ns16550a";
- reg = <0x40081000 0x1000>;
- reg-shift = <2>;
- interrupts = <24>;
- clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
- clock-names = "uartclk", "reg";
- dmas = <&dmamux 1 1 2
- &dmamux 2 1 2>;
- dma-names = "tx", "rx";
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,orion-xor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell XOR engine
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: marvell,armada-380-xor
+ - const: marvell,orion-xor
+ - enum:
+ - marvell,armada-3700-xor
+ - marvell,orion-xor
+
+ reg:
+ items:
+ - description: Low registers for the XOR engine
+ - description: High registers for the XOR engine
+
+ clocks:
+ maxItems: 1
+
+patternProperties:
+ "^(channel|xor)[0-9]+$":
+ description: XOR channel sub-node
+ type: object
+ additionalProperties: false
+
+ properties:
+ interrupts:
+ description: Interrupt specifier for the XOR channel
+ items:
+ - description: Interrupt for this channel
+
+ dmacap,memcpy:
+ type: boolean
+ deprecated: true
+ description:
+ Indicates that the XOR channel is capable of memcpy operations
+
+ dmacap,memset:
+ type: boolean
+ deprecated: true
+ description:
+ Indicates that the XOR channel is capable of memset operations
+
+ dmacap,xor:
+ type: boolean
+ deprecated: true
+ description:
+ Indicates that the XOR channel is capable of xor operations
+
+ required:
+ - interrupts
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ xor@d0060900 {
+ compatible = "marvell,orion-xor";
+ reg = <0xd0060900 0x100>,
+ <0xd0060b00 0x100>;
+ clocks = <&coreclk 0>;
+
+ xor00 {
+ interrupts = <51>;
+ };
+ xor01 {
+ interrupts = <52>;
+ };
+ };
+++ /dev/null
-* Marvell XOR engines
-
-Required properties:
-- compatible: Should be one of the following:
- - "marvell,orion-xor"
- - "marvell,armada-380-xor"
- - "marvell,armada-3700-xor".
-- reg: Should contain registers location and length (two sets)
- the first set is the low registers, the second set the high
- registers for the XOR engine.
-- clocks: pointer to the reference clock
-
-The DT node must also contains sub-nodes for each XOR channel that the
-XOR engine has. Those sub-nodes have the following required
-properties:
-- interrupts: interrupt of the XOR channel
-
-The sub-nodes used to contain one or several of the following
-properties, but they are now deprecated:
-- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
-- dmacap,memset to indicate that the XOR channel is capable of memset operations
-- dmacap,xor to indicate that the XOR channel is capable of xor operations
-- dmacap,interrupt to indicate that the XOR channel is capable of
- generating interrupts
-
-Example:
-
-xor@d0060900 {
- compatible = "marvell,orion-xor";
- reg = <0xd0060900 0x100
- 0xd0060b00 0x100>;
- clocks = <&coreclk 0>;
-
- xor00 {
- interrupts = <51>;
- };
- xor01 {
- interrupts = <52>;
- };
-};
- const: nvidia,tegra186-gpcdma
- items:
- enum:
+ - nvidia,tegra264-gpcdma
- nvidia,tegra234-gpcdma
- nvidia,tegra194-gpcdma
- const: nvidia,tegra186-gpcdma
anyOf:
- required:
- qcom,powered-remotely
+ - num-channels
+ - qcom,num-ees
- required:
- qcom,controlled-remotely
+ - num-channels
+ - qcom,num-ees
- required:
- clocks
- clock-names
- qcom,sm6350-gpi-dma
- items:
- enum:
+ - qcom,milos-gpi-dma
- qcom,qcm2290-gpi-dma
- qcom,qcs8300-gpi-dma
- qcom,qdu1000-gpi-dma
- qcom,sa8775p-gpi-dma
- qcom,sar2130p-gpi-dma
- qcom,sc7280-gpi-dma
+ - qcom,sc8280xp-gpi-dma
- qcom,sdx75-gpi-dma
- qcom,sm6115-gpi-dma
- qcom,sm6375-gpi-dma
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sophgo,cv1800b-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800/SG200 Series DMA multiplexer
+
+maintainers:
+ - Inochi Amaoto <inochiama@gmail.com>
+
+description:
+ The DMA multiplexer of CV1800 is a subdevice of the system
+ controller. It support mapping 8 channels, but each channel
+ can be mapped only once.
+
+allOf:
+ - $ref: dma-router.yaml#
+
+properties:
+ compatible:
+ const: sophgo,cv1800b-dmamux
+
+ reg:
+ items:
+ - description: DMA channal remapping register
+ - description: DMA channel interrupt mapping register
+
+ '#dma-cells':
+ const: 2
+ description:
+ The first cells is device id. The second one is the cpu id.
+
+ dma-masters:
+ maxItems: 1
+
+required:
+ - reg
+ - '#dma-cells'
+ - dma-masters
+
+additionalProperties: false
+
+examples:
+ - |
+ dma-router@154 {
+ compatible = "sophgo,cv1800b-dmamux";
+ reg = <0x154 0x8>, <0x298 0x4>;
+ #dma-cells = <2>;
+ dma-masters = <&dmac>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Phase-Locked Loop (DPLL) Device
+
+maintainers:
+ - Ivan Vecera <ivecera@redhat.com>
+
+description:
+ Digital Phase-Locked Loop (DPLL) device is used for precise clock
+ synchronization in networking and telecom hardware. The device can
+ have one or more channels (DPLLs) and one or more physical input and
+ output pins. Each DPLL channel can either produce pulse-per-clock signal
+ or drive ethernet equipment clock. The type of each channel can be
+ indicated by dpll-types property.
+
+properties:
+ $nodename:
+ pattern: "^dpll(@.*)?$"
+
+ "#address-cells":
+ const: 0
+
+ "#size-cells":
+ const: 0
+
+ dpll-types:
+ description: List of DPLL channel types, one per DPLL instance.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ items:
+ enum: [pps, eec]
+
+ input-pins:
+ type: object
+ description: DPLL input pins
+ unevaluatedProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^pin@[0-9a-f]+$":
+ $ref: /schemas/dpll/dpll-pin.yaml
+ unevaluatedProperties: false
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+ output-pins:
+ type: object
+ description: DPLL output pins
+ unevaluatedProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^pin@[0-9]+$":
+ $ref: /schemas/dpll/dpll-pin.yaml
+ unevaluatedProperties: false
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: true
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPLL Pin
+
+maintainers:
+ - Ivan Vecera <ivecera@redhat.com>
+
+description: |
+ The DPLL pin is either a physical input or output pin that is provided
+ by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by
+ its physical order number that is stored in reg property and can have
+ an additional set of properties like supported (allowed) frequencies,
+ label, type and may support embedded sync.
+
+ Note that the pin in this context has nothing to do with pinctrl.
+
+properties:
+ reg:
+ description: Hardware index of the DPLL pin.
+ maxItems: 1
+
+ connection-type:
+ description: Connection type of the pin
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ext, gnss, int, mux, synce]
+
+ esync-control:
+ description: Indicates whether the pin supports embedded sync functionality.
+ type: boolean
+
+ label:
+ description: String exposed as the pin board label
+ $ref: /schemas/types.yaml#/definitions/string
+
+ supported-frequencies-hz:
+ description: List of supported frequencies for this pin, expressed in Hz.
+
+required:
+ - reg
+
+additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Azurite DPLL device
+
+maintainers:
+ - Ivan Vecera <ivecera@redhat.com>
+
+description:
+ Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that
+ provides up to 5 independent DPLL channels, up to 10 differential or
+ single-ended inputs and 10 differential or 20 single-ended outputs.
+ These devices support both I2C and SPI interfaces.
+
+properties:
+ compatible:
+ enum:
+ - microchip,zl30731
+ - microchip,zl30732
+ - microchip,zl30733
+ - microchip,zl30734
+ - microchip,zl30735
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/dpll/dpll-device.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll@70 {
+ compatible = "microchip,zl30732";
+ reg = <0x70>;
+ dpll-types = "pps", "eec";
+
+ input-pins {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pin@0 { /* REF0P */
+ reg = <0>;
+ connection-type = "ext";
+ label = "Input 0";
+ supported-frequencies-hz = /bits/ 64 <1 1000>;
+ };
+ };
+
+ output-pins {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pin@3 { /* OUT1N */
+ reg = <3>;
+ connection-type = "gnss";
+ esync-control;
+ label = "Output 1";
+ supported-frequencies-hz = /bits/ 64 <1 10000>;
+ };
+ };
+ };
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpll@70 {
+ compatible = "microchip,zl30731";
+ reg = <0x70>;
+ spi-max-frequency = <12500000>;
+
+ dpll-types = "pps";
+
+ input-pins {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pin@0 { /* REF0P */
+ reg = <0>;
+ connection-type = "ext";
+ label = "Input 0";
+ supported-frequencies-hz = /bits/ 64 <1 1000>;
+ };
+ };
+
+ output-pins {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pin@3 { /* OUT1N */
+ reg = <3>;
+ connection-type = "gnss";
+ esync-control;
+ label = "Output 1";
+ supported-frequencies-hz = /bits/ 64 <1 10000>;
+ };
+ };
+ };
+ };
+...
- const: runstall
- const: softreset
+ access-controllers:
+ maxItems: 1
+
required:
- compatible
- reg
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
dsp@10803000 {
- compatible = "mediatek,mt8195-dsp";
- reg = <0x10803000 0x1000>,
- <0x10840000 0x40000>;
- reg-names = "cfg", "sram";
- clocks = <&topckgen 10>, //CLK_TOP_ADSP
- <&clk26m>,
- <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS
- <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2
- <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP
- <&topckgen 34>; //CLK_TOP_AUDIO_H
- clock-names = "adsp_sel",
- "clk26m_ck",
- "audio_local_bus",
- "mainpll_d7_d2",
- "scp_adsp_audiodsp",
- "audio_h";
- memory-region = <&adsp_dma_mem_reserved>,
- <&adsp_mem_reserved>;
- power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
- mbox-names = "rx", "tx";
- mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+ compatible = "mediatek,mt8195-dsp";
+ reg = <0x10803000 0x1000>,
+ <0x10840000 0x40000>;
+ reg-names = "cfg", "sram";
+ clocks = <&topckgen 10>, //CLK_TOP_ADSP
+ <&clk26m>,
+ <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS
+ <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2
+ <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP
+ <&topckgen 34>; //CLK_TOP_AUDIO_H
+ clock-names = "adsp_sel",
+ "clk26m_ck",
+ "audio_local_bus",
+ "mainpll_d7_d2",
+ "scp_adsp_audiodsp",
+ "audio_h";
+ memory-region = <&adsp_dma_mem_reserved>,
+ <&adsp_mem_reserved>;
+ power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
+ mbox-names = "rx", "tx";
+ mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
};
#include <dt-bindings/gpio/gpio.h>
npe: npe@c8006000 {
- compatible = "intel,ixp4xx-network-processing-engine";
- reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
+ compatible = "intel,ixp4xx-network-processing-engine";
+ reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- hss@0 {
- compatible = "intel,ixp4xx-hss";
- reg = <0>;
- intel,npe-handle = <&npe 0>;
- intel,queue-chl-rxtrig = <&qmgr 12>;
- intel,queue-chl-txready = <&qmgr 34>;
- intel,queue-pkt-rx = <&qmgr 13>;
- intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
- intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
- intel,queue-pkt-txdone = <&qmgr 22>;
- cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
- clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
- };
+ hss@0 {
+ compatible = "intel,ixp4xx-hss";
+ reg = <0>;
+ intel,npe-handle = <&npe 0>;
+ intel,queue-chl-rxtrig = <&qmgr 12>;
+ intel,queue-chl-txready = <&qmgr 34>;
+ intel,queue-pkt-rx = <&qmgr 13>;
+ intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+ intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+ intel,queue-pkt-txdone = <&qmgr 22>;
+ cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+ clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+ };
- crypto {
- compatible = "intel,ixp4xx-crypto";
- intel,npe-handle = <&npe 2>;
- queue-rx = <&qmgr 30>;
- queue-txready = <&qmgr 29>;
- };
+ crypto {
+ compatible = "intel,ixp4xx-crypto";
+ intel,npe-handle = <&npe 2>;
+ queue-rx = <&qmgr 30>;
+ queue-txready = <&qmgr 29>;
+ };
};
...
- enum:
- nvidia,tegra194-bpmp
- nvidia,tegra234-bpmp
+ - nvidia,tegra264-bpmp
- const: nvidia,tegra186-bpmp
- const: nvidia,tegra186-bpmp
- qcom,scm-ipq8074
- qcom,scm-ipq9574
- qcom,scm-mdm9607
+ - qcom,scm-milos
- qcom,scm-msm8226
- qcom,scm-msm8660
- qcom,scm-msm8916
compatible:
contains:
enum:
+ - qcom,scm-milos
- qcom,scm-sm8450
- qcom,scm-sm8550
- qcom,scm-sm8650
items:
- const: aon
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: gpu-clkgen
+
"#power-domain-cells":
const: 1
reg = <0x40000000 0x10000>;
gpio-controller;
#gpio-cells = <2>;
+ clocks = <&clk>;
};
};
examples:
- |
versal_fpga: versal-fpga {
- compatible = "xlnx,versal-fpga";
+ compatible = "xlnx,versal-fpga";
};
...
properties:
compatible:
- enum:
- - u-blox,neo-6m
- - u-blox,neo-8
- - u-blox,neo-m8
+ oneOf:
+ - enum:
+ - u-blox,neo-6m
+ - u-blox,neo-8
+ - u-blox,neo-m8
+ - items:
+ - const: u-blox,neo-m9
+ - const: u-blox,neo-m8
reg:
description: >
+++ /dev/null
-GPIO controllers on MPC8xxx SoCs
-
-This is for the non-QE/CPM/GUTs GPIO controllers as found on
-8349, 8572, 8610 and compatible.
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-See bindings/gpio/gpio.txt for details of how to specify GPIO
-information for devices.
-
-The GPIO module usually is connected to the SoC's internal interrupt
-controller, see bindings/interrupt-controller/interrupts.txt (the
-interrupt client nodes section) for details how to specify this GPIO
-module's interrupt.
-
-The GPIO module may serve as another interrupt controller (cascaded to
-the SoC's internal interrupt controller). See the interrupt controller
-nodes section in bindings/interrupt-controller/interrupts.txt for
-details.
-
-Required properties:
-- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
- for 83xx, "fsl,mpc8572-gpio" for 85xx, or
- "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells: Should be two. The first cell is the pin number
- and the second cell is used to specify optional
- parameters (currently unused).
-- interrupts: Interrupt mapping for GPIO IRQ.
-- gpio-controller: Marks the port as GPIO controller.
-
-Optional properties:
-- interrupt-controller: Empty boolean property which marks the GPIO
- module as an IRQ controller.
-- #interrupt-cells: Should be two. Defines the number of integer
- cells required to specify an interrupt within
- this interrupt controller. The first cell
- defines the pin number, the second cell
- defines additional flags (trigger type,
- trigger polarity). Note that the available
- set of trigger conditions supported by the
- GPIO module depends on the actual SoC.
-
-Example of gpio-controller nodes for a MPC8347 SoC:
-
- gpio1: gpio-controller@c00 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
- reg = <0xc00 0x100>;
- interrupt-parent = <&ipic>;
- interrupts = <74 0x8>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio-controller@d00 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
- reg = <0xd00 0x100>;
- interrupt-parent = <&ipic>;
- interrupts = <75 0x8>;
- gpio-controller;
- };
-
-Example of a peripheral using the GPIO module as an IRQ controller:
-
- funkyfpga@0 {
- compatible = "funky-fpga";
- ...
- interrupt-parent = <&gpio1>;
- interrupts = <4 3>;
- };
+++ /dev/null
-* Abilis TB10x GPIO controller
-
-Required Properties:
-- compatible: Should be "abilis,tb10x-gpio"
-- reg: Address and length of the register set for the device
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be <2>. The first cell is the pin number and the
- second cell is used to specify optional parameters:
- - bit 0 specifies polarity (0 for normal, 1 for inverted).
-- abilis,ngpio: the number of GPIO pins this driver controls.
-
-Optional Properties:
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
-- interrupts: Defines the interrupt line connecting this GPIO controller to
- its parent interrupt controller.
-
-GPIO ranges are specified as described in
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-
- gpioa: gpio@ff140000 {
- compatible = "abilis,tb10x-gpio";
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&tb10x_ictl>;
- interrupts = <27 2>;
- reg = <0xFF140000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- abilis,ngpio = <3>;
- gpio-ranges = <&iomux 0 0 0>;
- gpio-ranges-group-names = "gpioa_pins";
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/abilis,tb10x-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abilis TB10x GPIO controller
+
+maintainers:
+ - Christian Ruppert <christian.ruppert@abilis.com>
+
+properties:
+ compatible:
+ const: abilis,tb10x-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges: true
+
+ gpio-ranges-group-names: true
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+ description: Interrupts are triggered on both edges
+
+ interrupts:
+ maxItems: 1
+
+ abilis,ngpio:
+ description: Number of GPIO pins this driver controls
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - abilis,ngpio
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@ff140000 {
+ compatible = "abilis,tb10x-gpio";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <27 2>;
+ reg = <0xff140000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ abilis,ngpio = <3>;
+ gpio-ranges = <&iomux 0 0 0>;
+ gpio-ranges-group-names = "gpioa_pins";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/altr-pio-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera GPIO controller
+
+maintainers:
+ - Dinh Nguyen <dinguyen@kernel.org>
+ - Marek Vasut <marex@denx.de>
+ - Mathieu Malaterre <malat@debian.org>
+ - Tien Hock Loh <thloh@altera.com>
+
+properties:
+ compatible:
+ const: altr,pio-1.0
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ First cell is the GPIO offset number. Second cell is reserved and
+ currently unused.
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ altr,ngpio:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width of the GPIO bank.
+ default: 32
+
+ altr,interrupt-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Specifies the interrupt trigger type synthesized by hardware.
+ Values defined in <dt-bindings/interrupt-controller/irq.h>.
+ enum: [1, 2, 3, 4]
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gpio@ff200000 {
+ compatible = "altr,pio-1.0";
+ reg = <0xff200000 0x10>;
+ interrupts = <45 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ altr,ngpio = <32>;
+ altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/apm,xgene-gpio-sb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene Standby GPIO controller
+
+maintainers:
+ - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description: |
+ This is a gpio controller in the standby domain. It also supports interrupt in
+ some particular pins which are sourced to its parent interrupt controller
+ as diagram below:
+ +-----------------+
+ | X-Gene standby |
+ | GPIO controller +------ GPIO_0
+ +------------+ | | ...
+ | Parent IRQ | EXT_INT_0 | +------ GPIO_8/EXT_INT_0
+ | controller | (SPI40) | | ...
+ | (GICv2) +--------------+ +------ GPIO_[N+8]/EXT_INT_N
+ | | ... | |
+ | | EXT_INT_N | +------ GPIO_[N+9]
+ | | (SPI[40 + N])| | ...
+ | +--------------+ +------ GPIO_MAX
+ +------------+ +-----------------+
+
+properties:
+ compatible:
+ const: apm,xgene-gpio-sb
+
+ reg:
+ maxItems: 1
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ interrupts:
+ description:
+ List of interrupt specifiers for EXT_INT_0 through EXT_INT_N. The first
+ entry must correspond to EXT_INT_0.
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ First cell selects EXT_INT_N (0-N), second cell specifies flags
+
+ interrupt-controller: true
+
+ apm,nr-gpios:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of GPIO pins
+
+ apm,nr-irqs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of interrupt pins
+
+ apm,irq-start:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Lowest GPIO pin supporting interrupts
+
+required:
+ - compatible
+ - reg
+ - '#gpio-cells'
+ - gpio-controller
+ - interrupts
+ - '#interrupt-cells'
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@17001000 {
+ compatible = "apm,xgene-gpio-sb";
+ reg = <0x17001000 0x400>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0x0 0x28 0x1>,
+ <0x0 0x29 0x1>,
+ <0x0 0x2a 0x1>,
+ <0x0 0x2b 0x1>,
+ <0x0 0x2c 0x1>,
+ <0x0 0x2d 0x1>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ apm,nr-gpios = <22>;
+ apm,nr-irqs = <6>;
+ apm,irq-start = <8>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/apple,smc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Mac System Management Controller GPIO
+
+maintainers:
+ - Sven Peter <sven@kernel.org>
+
+description:
+ Apple Mac System Management Controller GPIO block.
+
+properties:
+ compatible:
+ const: apple,smc-gpio
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cavium,octeon-3860-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cavium Octeon 3860 GPIO controller
+
+maintainers:
+ - Bartosz Golaszewski <brgl@bgdev.pl>
+
+properties:
+ compatible:
+ const: cavium,octeon-3860-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 16
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gpio@1070000000800 {
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pin connect to 16 consecutive CUI bits */
+ interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+ <0 20>, <0 21>, <0 22>, <0 23>,
+ <0 24>, <0 25>, <0 26>, <0 27>,
+ <0 28>, <0 29>, <0 30>, <0 31>;
+ };
+ };
+++ /dev/null
-* General Purpose Input Output (GPIO) bus.
-
-Properties:
-- compatible: "cavium,octeon-3860-gpio"
-
- Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
-
-- reg: The base address of the GPIO unit's register bank.
-
-- gpio-controller: This is a GPIO controller.
-
-- #gpio-cells: Must be <2>. The first cell is the GPIO pin.
-
-- interrupt-controller: The GPIO controller is also an interrupt
- controller, many of its pins may be configured as an interrupt
- source.
-
-- #interrupt-cells: Must be <2>. The first cell is the GPIO pin
- connected to the interrupt source. The second cell is the interrupt
- triggering protocol and may have one of four values:
- 1 - edge triggered on the rising edge.
- 2 - edge triggered on the falling edge
- 4 - level triggered active high.
- 8 - level triggered active low.
-
-- interrupts: Interrupt routing for each pin.
-
-Example:
-
- gpio-controller@1070000000800 {
- #gpio-cells = <2>;
- compatible = "cavium,octeon-3860-gpio";
- reg = <0x10700 0x00000800 0x0 0x100>;
- gpio-controller;
- /* Interrupts are specified by two parts:
- * 1) GPIO pin number (0..15)
- * 2) Triggering (1 - edge rising
- * 2 - edge falling
- * 4 - level active high
- * 8 - level active low)
- */
- interrupt-controller;
- #interrupt-cells = <2>;
- /* The GPIO pin connect to 16 consecutive CUI bits */
- interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
- <0 20>, <0 21>, <0 22>, <0 23>,
- <0 24>, <0 25>, <0 26>, <0 27>,
- <0 28>, <0 29>, <0 30>, <0 31>;
- };
+++ /dev/null
-Cadence GPIO controller bindings
-
-Required properties:
-- compatible: should be "cdns,gpio-r1p02".
-- reg: the register base address and size.
-- #gpio-cells: should be 2.
- * first cell is the GPIO number.
- * second cell specifies the GPIO flags, as defined in
- <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
- and GPIO_ACTIVE_LOW flags are supported.
-- gpio-controller: marks the device as a GPIO controller.
-- clocks: should contain one entry referencing the peripheral clock driving
- the GPIO controller.
-
-Optional properties:
-- ngpios: integer number of gpio lines supported by this controller, up to 32.
-- interrupts: interrupt specifier for the controllers interrupt.
-- interrupt-controller: marks the device as an interrupt controller. When
- defined, interrupts, interrupt-parent and #interrupt-cells
- are required.
-- interrupt-cells: should be 2.
- * first cell is the GPIO number you want to use as an IRQ source.
- * second cell specifies the IRQ type, as defined in
- <dt-bindings/interrupt-controller/irq.h>.
- Currently only level sensitive IRQs are supported.
-
-
-Example:
- gpio0: gpio-controller@fd060000 {
- compatible = "cdns,gpio-r1p02";
- reg =<0xfd060000 0x1000>;
-
- clocks = <&gpio_clk>;
-
- interrupt-parent = <&gic>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cdns,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence GPIO Controller
+
+maintainers:
+ - Jan Kotas <jank@cadence.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: cdns,gpio-r1p02
+ - items:
+ - enum:
+ - axiado,ax3000-gpio
+ - const: cdns,gpio-r1p02
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ ngpios:
+ minimum: 1
+ maximum: 32
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ - First cell is the GPIO line number.
+ - Second cell is flags as defined in <dt-bindings/gpio/gpio.h>,
+ only GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW supported.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description: |
+ - First cell is the GPIO line number used as IRQ.
+ - Second cell is the trigger type, as defined in
+ <dt-bindings/interrupt-controller/irq.h>.
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - gpio-controller
+ - "#gpio-cells"
+
+if:
+ required: [interrupt-controller]
+then:
+ required:
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ gpio0: gpio-controller@fd060000 {
+ compatible = "cdns,gpio-r1p02";
+ reg = <0xfd060000 0x1000>;
+ clocks = <&gpio_clk>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+++ /dev/null
-* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs
-
-Required properties:
-- compatible: Should contain "cirrus,ep7209-mctrl-gpio".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = Active high,
- 1 = Active low.
-
-Example:
- sysgpio: sysgpio {
- compatible = "cirrus,ep7312-mctrl-gpio",
- "cirrus,ep7209-mctrl-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cirrus,clps711x-mctrl-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs
+
+maintainers:
+ - Alexander Shiyan <shc_work@mail.ru>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: cirrus,ep7312-mctrl-gpio
+ - const: cirrus,ep7209-mctrl-gpio
+ - const: cirrus,ep7209-mctrl-gpio
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio,syscon-dev:
+ description:
+ Phandle and offset of device's specific registers within the syscon state
+ control registers
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to syscon
+ - description: register offset within state control registers
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ sysgpio: sysgpio {
+ compatible = "cirrus,ep7312-mctrl-gpio",
+ "cirrus,ep7209-mctrl-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/exar,xra1403.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: XRA1403 16-bit GPIO Expander with Reset Input
+
+maintainers:
+ - Nandor Han <nandor.han@ge.com>
+
+description: >
+ The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features
+ available:
+
+ - Individually programmable inputs:
+ - Internal pull-up resistors
+ - Polarity inversion
+ - Individual interrupt enable
+ - Rising edge and/or Falling edge interrupt
+ - Input filter
+ - Individually programmable outputs:
+ - Output Level Control
+ - Output Three-State Control
+
+properties:
+ compatible:
+ const: exar,xra1403
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ reset-gpios:
+ description: Control line for the device reset.
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@2 {
+ compatible = "exar,xra1403";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/fcs,fxl6408.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Fairchild FXL6408 I2C GPIO Expander
-
-maintainers:
- - Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
-
-properties:
- compatible:
- enum:
- - fcs,fxl6408
-
- reg:
- maxItems: 1
-
- "#gpio-cells":
- const: 2
-
- gpio-controller: true
-
- gpio-line-names:
- minItems: 1
- maxItems: 8
-
-patternProperties:
- "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
- type: object
- required:
- - gpio-hog
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio_expander_43: gpio-expander@43 {
- compatible = "fcs,fxl6408";
- reg = <0x43>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "Wi-Fi_W_DISABLE", "Wi-Fi_WKUP_WLAN",
- "PWR_EN_+V3.3_WiFi_N", "PCIe_REF_CLK_EN",
- "USB_RESET_N", "USB_BYPASS_N", "Wi-Fi_PDn",
- "Wi-Fi_WKUP_BT";
- };
- };
- fsl,ls1088a-gpio
- fsl,ls2080a-gpio
- const: fsl,qoriq-gpio
+ - items:
+ - enum:
+ - fsl,mpc8308-gpio
+ - fsl,mpc8377-gpio
+ - fsl,mpc8378-gpio
+ - fsl,mpc8379-gpio
+ - const: fsl,mpc8349-gpio
reg:
maxItems: 1
+++ /dev/null
-Gateworks PLD GPIO controller bindings
-
-The GPIO controller should be a child node on an I2C bus.
-
-Required properties:
-- compatible: Should be "gateworks,pld-gpio"
-- reg: I2C slave address
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
- the second cell is used to specify optional parameters.
-
-Example:
-
-pld@56 {
- compatible = "gateworks,pld-gpio";
- reg = <0x56>;
- gpio-controller;
- #gpio-cells = <2>;
-};
+++ /dev/null
-* 74XX MMIO GPIO driver
-
-Required properties:
-- compatible: Should contain one of the following:
- "ti,741g125": for 741G125 (1-bit Input),
- "ti,741g174": for 741G74 (1-bit Output),
- "ti,742g125": for 742G125 (2-bit Input),
- "ti,7474" : for 7474 (2-bit Output),
- "ti,74125" : for 74125 (4-bit Input),
- "ti,74175" : for 74175 (4-bit Output),
- "ti,74365" : for 74365 (6-bit Input),
- "ti,74174" : for 74174 (6-bit Output),
- "ti,74244" : for 74244 (8-bit Input),
- "ti,74273" : for 74273 (8-bit Output),
- "ti,741624" : for 741624 (16-bit Input),
- "ti,7416374": for 7416374 (16-bit Output).
-- reg: Physical base address and length where IC resides.
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify the GPIO polarity:
- 0 = Active High,
- 1 = Active Low.
-
-Example:
- ctrl: gpio@30008004 {
- compatible = "ti,74174";
- reg = <0x30008004 0x1>;
- gpio-controller;
- #gpio-cells = <2>;
- };
+++ /dev/null
-Altera GPIO controller bindings
-
-Required properties:
-- compatible:
- - "altr,pio-1.0"
-- reg: Physical base address and length of the controller's registers.
-- #gpio-cells : Should be 2
- - The first cell is the gpio offset number.
- - The second cell is reserved and is currently unused.
-- gpio-controller : Marks the device node as a GPIO controller.
-- interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
- - The first cell is the GPIO offset number within the GPIO controller.
- - The second cell is the interrupt trigger type and level flags.
-- interrupts: Specify the interrupt.
-- altr,interrupt-type: Specifies the interrupt trigger type the GPIO
- hardware is synthesized. This field is required if the Altera GPIO controller
- used has IRQ enabled as the interrupt type is not software controlled,
- but hardware synthesized. Required if GPIO is used as an interrupt
- controller. The value is defined in <dt-bindings/interrupt-controller/irq.h>
- Only the following flags are supported:
- IRQ_TYPE_EDGE_RISING
- IRQ_TYPE_EDGE_FALLING
- IRQ_TYPE_EDGE_BOTH
- IRQ_TYPE_LEVEL_HIGH
-
-Optional properties:
-- altr,ngpio: Width of the GPIO bank. This defines how many pins the
- GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not
- specified.
-
-Example:
-
-gpio_altr: gpio@ff200000 {
- compatible = "altr,pio-1.0";
- reg = <0xff200000 0x10>;
- interrupts = <0 45 4>;
- altr,ngpio = <32>;
- altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
-};
+++ /dev/null
-Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
-
-Required properties:
-- compatible: has to be "qca,<soctype>-gpio" and one of the following
- fallbacks:
- - "qca,ar7100-gpio"
- - "qca,ar9340-gpio"
-- reg: Base address and size of the controllers memory area
-- gpio-controller : Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters.
-- ngpios: Should be set to the number of GPIOs available on the SoC.
-
-Optional properties:
-- interrupts: Interrupt specifier for the controllers interrupt.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
- source, should be 2
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-
- gpio@18040000 {
- compatible = "qca,ar9132-gpio", "qca,ar7100-gpio";
- reg = <0x18040000 0x30>;
- interrupts = <2>;
-
- ngpios = <22>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+++ /dev/null
-Cirrus Logic CLPS711X GPIO controller
-
-Required properties:
-- compatible: Should be "cirrus,ep7209-gpio"
-- reg: Physical base GPIO controller registers location and length.
- There should be two registers, first is DATA register, the second
- is DIRECTION.
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
- gpio0 = &porta;
-};
-
-porta: gpio@80000000 {
- compatible = "cirrus,ep7312-gpio","cirrus,ep7209-gpio";
- reg = <0x80000000 0x1>, <0x80000040 0x1>;
- gpio-controller;
- #gpio-cells = <2>;
-};
+++ /dev/null
-Keystone 2 DSP GPIO controller bindings
-
-HOST OS userland running on ARM can send interrupts to DSP cores using
-the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
-This is one of the component used by the IPC mechanism used on Keystone SOCs.
-
-For example TCI6638K2K SoC has 8 DSP GPIO controllers:
- - 8 for C66x CorePacx CPUs 0-7
-
-Keystone 2 DSP GPIO controller has specific features:
-- each GPIO can be configured only as output pin;
-- setting GPIO value to 1 causes IRQ generation on target DSP core;
-- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
- pending.
-
-Required Properties:
-- compatible: should be "ti,keystone-dsp-gpio"
-- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
- access device state control registers and the offset of device's specific
- registers within device state control registers range.
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be 2.
-
-Please refer to gpio.txt in this directory for details of the common GPIO
-bindings used by client devices.
-
-Example:
- dspgpio0: keystone_dsp_gpio@2620240 {
- compatible = "ti,keystone-dsp-gpio";
- ti,syscon-dev = <&devctrl 0x240>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- dsp0: dsp0 {
- compatible = "linux,rproc-user";
- ...
- kick-gpio = <&dspgpio0 27>;
- };
+++ /dev/null
-TI/National Semiconductor LP3943 GPIO controller
-
-Required properties:
- - compatible: "ti,lp3943-gpio"
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. See gpio.txt in this directory for a
- description of the cells format.
-
-Example:
-Simple LED controls with LP3943 GPIO controller
-
-&i2c4 {
- lp3943@60 {
- compatible = "ti,lp3943";
- reg = <0x60>;
-
- gpioex: gpio {
- compatible = "ti,lp3943-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-};
-
-leds {
- compatible = "gpio-leds";
- indicator1 {
- label = "indi1";
- gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
- };
-
- indicator2 {
- label = "indi2";
- gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-};
+++ /dev/null
-GPIO driver for Maxim MAX3191x industrial serializer
-
-Required properties:
- - compatible: Must be one of:
- "maxim,max31910"
- "maxim,max31911"
- "maxim,max31912"
- "maxim,max31913"
- "maxim,max31953"
- "maxim,max31963"
- - reg: Chip select number.
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be two. For consumer use see gpio.txt.
-
-Optional properties:
- - #daisy-chained-devices:
- Number of chips in the daisy-chain (default is 1).
- - maxim,modesel-gpios: GPIO pins to configure modesel of each chip.
- The number of GPIOs must equal "#daisy-chained-devices"
- (if each chip is driven by a separate pin) or 1
- (if all chips are wired to the same pin).
- - maxim,fault-gpios: GPIO pins to read fault of each chip.
- The number of GPIOs must equal "#daisy-chained-devices"
- or 1.
- - maxim,db0-gpios: GPIO pins to configure debounce of each chip.
- The number of GPIOs must equal "#daisy-chained-devices"
- or 1.
- - maxim,db1-gpios: GPIO pins to configure debounce of each chip.
- The number of GPIOs must equal "maxim,db0-gpios".
- - maxim,modesel-8bit: Boolean whether the modesel pin of the chips is
- pulled high (8-bit mode). Use this if the modesel pin
- is hardwired and consequently "maxim,modesel-gpios"
- cannot be specified. By default if neither this nor
- "maxim,modesel-gpios" is given, the driver assumes
- that modesel is pulled low (16-bit mode).
- - maxim,ignore-undervoltage:
- Boolean whether to ignore undervoltage alarms signaled
- by the "maxim,fault-gpios" or by the status byte
- (in 16-bit mode). Use this if the chips are powered
- through 5VOUT instead of VCC24V, in which case they
- will constantly signal undervoltage.
-
-For other required and optional properties of SPI slave nodes please refer to
-../spi/spi-bus.txt.
-
-Example:
- gpio@0 {
- compatible = "maxim,max31913";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
-
- maxim,modesel-gpios = <&gpio2 23>;
- maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
- maxim,db0-gpios = <&gpio2 25>;
- maxim,db1-gpios = <&gpio2 26>;
-
- spi-max-frequency = <25000000>;
- };
+++ /dev/null
-GPIO driver for MAX77620 Power management IC from Maxim Semiconductor.
-
-Device has 8 GPIO pins which can be configured as GPIO as well as the
-special IO functions.
-
-Required properties:
--------------------
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-For more details, please refer generic GPIO DT binding document
-<devicetree/bindings/gpio/gpio.txt>.
-
-Example:
---------
-#include <dt-bindings/mfd/max77620.h>
-...
-max77620@3c {
- compatible = "maxim,max77620";
-
- gpio-controller;
- #gpio-cells = <2>;
-};
+++ /dev/null
-Lantiq SoC External Bus memory mapped GPIO controller
-
-By attaching hardware latches to the EBU it is possible to create output
-only gpios. This driver configures a special memory address, which when
-written to outputs 16 bit to the latches.
-
-The node describing the memory mapped GPIOs needs to be a child of the node
-describing the "lantiq,localbus".
-
-Required properties:
-- compatible : Should be "lantiq,gpio-mm-lantiq"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify optional parameters (currently
- unused).
-- gpio-controller : Marks the device node as a gpio controller.
-
-Optional properties:
-- lantiq,shadow : The default value that we shall assume as already set on the
- shift register cascade.
-
-Example:
-
-localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
-
- gpio_mm0: gpio@4000000 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10>;
- gpio-controller;
- #gpio-cells = <2>;
- lantiq,shadow = <0x77f>
- };
-}
+++ /dev/null
-Turris Mox Moxtet GPIO expander via Moxtet bus
-
-Required properties:
- - compatible : Should be "cznic,moxtet-gpio".
- - gpio-controller : Marks the device node as a GPIO controller.
- - #gpio-cells : Should be two. For consumer use see gpio.txt.
-
-Other properties are required for a Moxtet bus device, please refer to
-Documentation/devicetree/bindings/bus/moxtet.txt.
-
-Example:
-
- moxtet_sfp: gpio@0 {
- compatible = "cznic,moxtet-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0>;
- }
+++ /dev/null
-Palmas GPIO controller bindings
-
-Required properties:
-- compatible:
- - "ti,palams-gpio" for palma series of the GPIO controller
- - "ti,tps80036-gpio" for Palma series device TPS80036.
- - "ti,tps65913-gpio" for palma series device TPS65913.
- - "ti,tps65914-gpio" for palma series device TPS65914.
-- #gpio-cells : Should be two.
- - first cell is the gpio pin number
- - second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Note: This gpio node will be sub node of palmas node.
-
-Example:
- palmas: tps65913@58 {
- :::::::::::
- palmas_gpio: palmas_gpio {
- compatible = "ti,palmas-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
- :::::::::::
- };
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/gpio-pca9570.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: PCA9570 I2C GPO expander
-
-maintainers:
- - Sungbo Eo <mans0n@gorani.run>
-
-properties:
- compatible:
- enum:
- - dlg,slg7xl45106
- - nxp,pca9570
- - nxp,pca9571
-
- reg:
- maxItems: 1
-
- gpio-controller: true
-
- '#gpio-cells':
- const: 2
-
- gpio-line-names:
- minItems: 4
- maxItems: 8
-
- label:
- description: A descriptive name for this device.
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio@24 {
- compatible = "nxp,pca9570";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
-...
- ti,pca9536
- ti,tca6408
- ti,tca6416
+ - ti,tca6418
- ti,tca6424
- ti,tca9535
- ti,tca9538
+++ /dev/null
-Generic Parallel-in/Serial-out Shift Register GPIO Driver
-
-This binding describes generic parallel-in/serial-out shift register
-devices that can be used for GPI (General Purpose Input). This includes
-SN74165 serial-out shift registers and the SN65HVS88x series of
-industrial serializers.
-
-Required properties:
- - compatible : Should be "pisosr-gpio".
- - gpio-controller : Marks the device node as a GPIO controller.
- - #gpio-cells : Should be two. For consumer use see gpio.txt.
-
-Optional properties:
- - ngpios : Number of used GPIO lines (0..n-1), default is 8.
- - load-gpios : GPIO pin specifier attached to load enable, this
- pin is pulsed before reading from the device to
- load input pin values into the device.
-
-For other required and optional properties of SPI slave
-nodes please refer to ../spi/spi-bus.txt.
-
-Example:
-
- gpio@0 {
- compatible = "ti,sn65hvs882", "pisosr-gpio";
- gpio-controller;
- #gpio-cells = <2>;
-
- load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-
- reg = <0>;
- spi-max-frequency = <1000000>;
- spi-cpol;
- };
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: TPIC2810 GPIO controller
-
-maintainers:
- - Aswath Govindraju <a-govindraju@ti.com>
-
-properties:
- compatible:
- enum:
- - ti,tpic2810
-
- reg:
- maxItems: 1
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
-
- gpio-line-names:
- minItems: 1
- maxItems: 32
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/gpio/gpio.h>
-
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- gpio@60 {
- compatible = "ti,tpic2810";
- reg = <0x60>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "LED A", "LED B", "LED C";
- };
- };
+++ /dev/null
-* TS-4800 FPGA's GPIO controller bindings
-
-Required properties:
-- compatible: Must be "technologic,ts4800-gpio".
-- #gpio-cells: Should be two. The first cell is the pin number.
-- reg: Physical base address of the controller and length
- of memory mapped region.
-
-Optional property:
-- ngpios: See "gpio.txt"
-
-Example:
-
-gpio1: gpio {
- compatible = "technologic,ts4800-gpio";
- reg = <0x10020 0x6>;
- ngpios = <8>;
- gpio-controller;
- #gpio-cells = <2>;
-};
+++ /dev/null
-* Technologic Systems I2C-FPGA's GPIO controller bindings
-
-This bindings describes the GPIO controller for Technologic's FPGA core.
-TS-4900's FPGA encodes the GPIO state on 3 bits, whereas the TS-7970's FPGA
-uses 2 bits: it doesn't use a dedicated input bit.
-
-Required properties:
-- compatible: Should be one of the following
- "technologic,ts4900-gpio"
- "technologic,ts7970-gpio"
-- reg: Physical base address of the controller and length
- of memory mapped region.
-- #gpio-cells: Should be two. The first cell is the pin number.
-- gpio-controller: Marks the device node as a gpio controller.
-
-Optional property:
-- ngpios: Number of GPIOs this controller is instantiated with,
- the default is 32. See gpio.txt for more details.
-
-Example:
-
-&i2c2 {
- gpio8: gpio@28 {
- compatible = "technologic,ts4900-gpio";
- reg = <0x28>;
- #gpio-cells = <2>;
- gpio-controller;
- ngpios = <32>;
- };
-};
+++ /dev/null
-twl4030 GPIO controller bindings
-
-Required properties:
-- compatible:
- - "ti,twl4030-gpio" for twl4030 GPIO controller
-- #gpio-cells : Should be two.
- - first cell is the pin number
- - second cell is used to specify optional parameters (unused)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-- interrupt-controller: Mark the device node as an interrupt controller
- The first cell is the GPIO number.
- The second cell is not used.
-- ti,use-leds : Enables LEDA and LEDB outputs if set
-- ti,debounce : if n-th bit is set, debounces GPIO-n
-- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
-- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
-- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
-
-Example:
-
-twl_gpio: gpio {
- compatible = "ti,twl4030-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- #interrupt-cells = <2>;
- interrupt-controller;
- ti,use-leds;
-};
+++ /dev/null
-APM X-Gene Standby GPIO controller bindings
-
-This is a gpio controller in the standby domain. It also supports interrupt in
-some particular pins which are sourced to its parent interrupt controller
-as diagram below:
- +-----------------+
- | X-Gene standby |
- | GPIO controller +------ GPIO_0
-+------------+ | | ...
-| Parent IRQ | EXT_INT_0 | +------ GPIO_8/EXT_INT_0
-| controller | (SPI40) | | ...
-| (GICv2) +--------------+ +------ GPIO_[N+8]/EXT_INT_N
-| | ... | |
-| | EXT_INT_N | +------ GPIO_[N+9]
-| | (SPI[40 + N])| | ...
-| +--------------+ +------ GPIO_MAX
-+------------+ +-----------------+
-
-Required properties:
-- compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller
-- reg: Physical base address and size of the controller's registers
-- #gpio-cells: Should be two.
- - first cell is the pin number
- - second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- gpio-controller: Marks the device node as a GPIO controller.
-- interrupts: The EXT_INT_0 parent interrupt resource must be listed first.
-- interrupt-cells: Should be two.
- - first cell is 0-N corresponding for EXT_INT_0 to EXT_INT_N.
- - second cell is used to specify flags.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- apm,nr-gpios: Optional, specify number of gpios pin.
-- apm,nr-irqs: Optional, specify number of interrupt pins.
-- apm,irq-start: Optional, specify lowest gpio pin support interrupt.
-
-Example:
- sbgpio: gpio@17001000{
- compatible = "apm,xgene-gpio-sb";
- reg = <0x0 0x17001000 0x0 0x400>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupts = <0x0 0x28 0x1>,
- <0x0 0x29 0x1>,
- <0x0 0x2a 0x1>,
- <0x0 0x2b 0x1>,
- <0x0 0x2c 0x1>,
- <0x0 0x2d 0x1>;
- interrupt-parent = <&gic>;
- #interrupt-cells = <2>;
- interrupt-controller;
- apm,nr-gpios = <22>;
- apm,nr-irqs = <6>;
- apm,irq-start = <8>;
- };
-
- testuser {
- compatible = "example,testuser";
- /* Use the GPIO_13/EXT_INT_5 line as an active high triggered
- * level interrupt
- */
- interrupts = <5 4>;
- interrupt-parent = <&sbgpio>;
- };
+++ /dev/null
-APM X-Gene SoC GPIO controller bindings
-
-This is a gpio controller that is part of the flash controller.
-This gpio controller controls a total of 48 gpios.
-
-Required properties:
-- compatible: "apm,xgene-gpio" for X-Gene GPIO controller
-- reg: Physical base address and size of the controller's registers
-- #gpio-cells: Should be two.
- - first cell is the pin number
- - second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- gpio-controller: Marks the device node as a GPIO controller.
-
-Example:
- gpio0: gpio0@1701c000 {
- compatible = "apm,xgene-gpio";
- reg = <0x0 0x1701c000 0x0 0x40>;
- gpio-controller;
- #gpio-cells = <2>;
- };
+++ /dev/null
-GPIO Driver for XRA1403 16-BIT GPIO Expander With Reset Input from EXAR
-
-The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features available:
- - Individually programmable inputs:
- - Internal pull-up resistors
- - Polarity inversion
- - Individual interrupt enable
- - Rising edge and/or Falling edge interrupt
- - Input filter
- - Individually programmable outputs
- - Output Level Control
- - Output Three-State Control
-
-Properties
-----------
-Check documentation for SPI and GPIO controllers regarding properties needed to configure the node.
-
- - compatible = "exar,xra1403".
- - reg - SPI id of the device.
- - gpio-controller - marks the node as gpio.
- - #gpio-cells - should be two where the first cell is the pin number
- and the second one is used for optional parameters.
-
-Optional properties:
--------------------
- - reset-gpios: in case available used to control the device reset line.
- - interrupt-controller - marks the node as interrupt controller.
- - #interrupt-cells - should be two and represents the number of cells
- needed to encode interrupt source.
-
-Example
---------
-
- gpioxra0: gpio@2 {
- compatible = "exar,xra1403";
- reg = <2>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
-
- reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
- spi-max-frequency = <1000000>;
- };
+++ /dev/null
-* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs
-
-All GPIOs are pin-shared with other functions. DCRs control whether a
-particular pin that has GPIO capabilities acts as a GPIO or is used for
-another purpose. GPIO outputs are separately programmable to emulate
-an open-drain driver.
-
-Required properties:
- - compatible: must be "ibm,ppc4xx-gpio"
- - reg: address and length of the register set for the device
- - #gpio-cells: must be set to 2. The first cell is the pin number
- and the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
- - gpio-controller: marks the device node as a gpio controller.
-
-Example:
-
-GPIO0: gpio@ef600b00 {
- compatible = "ibm,ppc4xx-gpio";
- reg = <0xef600b00 0x00000048>;
- #gpio-cells = <2>;
- gpio-controller;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/lacie,netxbig-gpio-ext.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NetxBig GPIO extension bus
+
+maintainers:
+ - Simon Guinot <simon.guinot@sequanux.org>
+
+description: >
+ GPIO extension bus found on some LaCie/Seagate boards
+ (Example: 2Big/5Big Network v2, 2Big NAS).
+
+properties:
+ compatible:
+ items:
+ - const: lacie,netxbig-gpio-ext
+
+ addr-gpios:
+ description: GPIOs representing the address register (LSB->MSB).
+ items:
+ - description: bit 0 (LSB)
+ - description: bit 1
+ - description: bit 2 (MSB)
+
+ data-gpios:
+ description: GPIOs representing the data register (LSB->MSB).
+ items:
+ - description: bit 0 (LSB)
+ - description: bit 1
+ - description: bit 2 (MSB)
+
+ enable-gpio:
+ description: Latches the new configuration (address, data) on raising edge.
+ maxItems: 1
+
+required:
+ - compatible
+ - addr-gpios
+ - data-gpios
+ - enable-gpio
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ gpio {
+ compatible = "lacie,netxbig-gpio-ext";
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/lantiq,gpio-mm-lantiq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC External Bus memory mapped GPIO controller
+
+maintainers:
+ - John Crispin <john@phrozen.org>
+
+description: |
+ By attaching hardware latches to the EBU it is possible to create output
+ only gpios. This driver configures a special memory address, which when
+ written to outputs 16 bit to the latches.
+
+ The node describing the memory mapped GPIOs needs to be a child of the node
+ describing the "lantiq,localbus".
+
+properties:
+ compatible:
+ enum:
+ - lantiq,gpio-mm-lantiq
+ - lantiq,gpio-mm
+
+ reg:
+ maxItems: 1
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ lantiq,shadow:
+ description: The default value that we shall assume as already set on the shift register cascade.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - '#gpio-cells'
+ - gpio-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@4000000 {
+ compatible = "lantiq,gpio-mm-lantiq";
+ reg = <0x4000000 0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ lantiq,shadow = <0x77f>;
+ };
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/loongson,ls1x-gpio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Loongson-1 GPIO controller
-
-maintainers:
- - Keguang Zhang <keguang.zhang@gmail.com>
-
-properties:
- compatible:
- const: loongson,ls1x-gpio
-
- reg:
- maxItems: 1
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
-
- ngpios:
- minimum: 1
- maximum: 32
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
- - ngpios
-
-additionalProperties: false
-
-examples:
- - |
- gpio0: gpio@1fd010c0 {
- compatible = "loongson,ls1x-gpio";
- reg = <0x1fd010c0 0x4>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ngpios = <32>;
- };
-
-...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/maxim,max31910.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX3191x GPIO serializer
+
+maintainers:
+ - Lukas Wunner <lukas@wunner.de>
+
+properties:
+ compatible:
+ enum:
+ - maxim,max31910
+ - maxim,max31911
+ - maxim,max31912
+ - maxim,max31913
+ - maxim,max31953
+ - maxim,max31963
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ '#daisy-chained-devices':
+ description: Number of chips in the daisy-chain.
+ default: 1
+
+ maxim,modesel-gpios:
+ description:
+ GPIO pins to configure modesel of each chip. The number of GPIOs must
+ equal "#daisy-chained-devices" (if each chip is driven by a separate pin)
+ or 1 (if all chips are wired to the same pin).
+
+ maxim,fault-gpios:
+ description:
+ GPIO pins to read fault of each chip. The number of GPIOs must equal
+ "#daisy-chained-devices" or 1.
+
+ maxim,db0-gpios:
+ description:
+ GPIO pins to configure debounce of each chip. The number of GPIOs must
+ equal "#daisy-chained-devices" or 1.
+
+ maxim,db1-gpios:
+ description:
+ GPIO pins to configure debounce of each chip. The number of GPIOs must
+ equal "maxim,db0-gpios".
+
+ maxim,modesel-8bit:
+ description:
+ Boolean whether the modesel pin of the chips is pulled high (8-bit mode).
+ Use this if the modesel pin is hardwired and consequently
+ "maxim,modesel-gpios" cannot be specified. By default if neither this nor
+ "maxim,modesel-gpios" is given, the driver assumes that modesel is pulled
+ low (16-bit mode).
+ type: boolean
+
+ maxim,ignore-undervoltage:
+ description:
+ Boolean whether to ignore undervoltage alarms signaled by the
+ "maxim,fault-gpios" or by the status byte (in 16-bit mode). Use this if
+ the chips are powered through 5VOUT instead of VCC24V, in which case they
+ will constantly signal undervoltage.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@0 {
+ compatible = "maxim,max31913";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ maxim,modesel-gpios = <&gpio2 23>;
+ maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ maxim,db0-gpios = <&gpio2 25>;
+ maxim,db1-gpios = <&gpio2 26>;
+
+ spi-max-frequency = <25000000>;
+ };
+ };
+++ /dev/null
-* Microchip PIC32 GPIO devices (PIO).
-
-Required properties:
- - compatible: "microchip,pic32mzda-gpio"
- - reg: Base address and length for the device.
- - interrupts: The port interrupt shared by all pins.
- - gpio-controller: Marks the port as GPIO controller.
- - #gpio-cells: Two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity as defined in
- defined in <dt-bindings/gpio/gpio.h>:
- 0 = GPIO_ACTIVE_HIGH
- 1 = GPIO_ACTIVE_LOW
- 2 = GPIO_OPEN_DRAIN
- - interrupt-controller: Marks the device node as an interrupt controller.
- - #interrupt-cells: Two. The first cell is the GPIO number and second cell
- is used to specify the trigger type as defined in
- <dt-bindings/interrupt-controller/irq.h>:
- IRQ_TYPE_EDGE_RISING
- IRQ_TYPE_EDGE_FALLING
- IRQ_TYPE_EDGE_BOTH
- - clocks: Clock specifier (see clock bindings for details).
- - microchip,gpio-bank: Specifies which bank a controller owns.
- - gpio-ranges: Interaction with the PINCTRL subsystem.
-
-Example:
-
-/* PORTA */
-gpio0: gpio0@1f860000 {
- compatible = "microchip,pic32mzda-gpio";
- reg = <0x1f860000 0x100>;
- interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&rootclk PB4CLK>;
- microchip,gpio-bank = <0>;
- gpio-ranges = <&pic32_pinctrl 0 0 16>;
-};
-
-keys {
- ...
-
- button@sw1 {
- label = "ESC";
- linux,code = <1>;
- gpios = <&gpio0 12 0>;
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,pic32mzda-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32 GPIO controller
+
+maintainers:
+ - Joshua Henderson <joshua.henderson@microchip.com>
+ - Purna Chandra Mandal <purna.mandal@microchip.com>
+
+properties:
+ compatible:
+ const: microchip,pic32mzda-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ gpio-ranges: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ clocks:
+ maxItems: 1
+
+ microchip,gpio-bank:
+ description: Bank index owned by the controller
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - gpio-ranges
+ - "#gpio-cells"
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - clocks
+ - microchip,gpio-bank
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ gpio@1f860000 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860000 0x100>;
+ interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk 11>;
+ microchip,gpio-bank = <0>;
+ gpio-ranges = <&pic32_pinctrl 0 0 16>;
+ };
+++ /dev/null
-Binding for the GPIO extension bus found on some LaCie/Seagate boards
-(Example: 2Big/5Big Network v2, 2Big NAS).
-
-Required properties:
-- compatible: "lacie,netxbig-gpio-ext".
-- addr-gpios: GPIOs representing the address register (LSB -> MSB).
-- data-gpios: GPIOs representing the data register (LSB -> MSB).
-- enable-gpio: latches the new configuration (address, data) on raising edge.
-
-Example:
-
-netxbig_gpio_ext: netxbig-gpio-ext {
- compatible = "lacie,netxbig-gpio-ext";
-
- addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
- &gpio1 16 GPIO_ACTIVE_HIGH
- &gpio1 17 GPIO_ACTIVE_HIGH>;
- data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
- &gpio1 13 GPIO_ACTIVE_HIGH
- &gpio1 14 GPIO_ACTIVE_HIGH>;
- enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-Nintendo Wii (Hollywood) GPIO controller
-
-Required properties:
-- compatible: "nintendo,hollywood-gpio"
-- reg: Physical base address and length of the controller's registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the pin number and the
- second cell is used to specify optional parameters:
- - bit 0 specifies polarity (0 for normal, 1 for inverted).
-
-Optional properties:
-- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
- interrupt.
-
-Example:
-
- GPIO: gpio@d8000c0 {
- #gpio-cells = <2>;
- compatible = "nintendo,hollywood-gpio";
- reg = <0x0d8000c0 0x40>;
- gpio-controller;
- ngpios = <24>;
- }
+++ /dev/null
-NXP LPC18xx/43xx GPIO controller Device Tree Bindings
------------------------------------------------------
-
-Required properties:
-- compatible : Should be "nxp,lpc1850-gpio"
-- reg : List of addresses and lengths of the GPIO controller
- register sets
-- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
- "gpio-gpoup1-ic"
-- clocks : Phandle and clock specifier pair for GPIO controller
-- resets : Phandle and reset specifier pair for GPIO controller
-- gpio-controller : Marks the device node as a GPIO controller
-- #gpio-cells : Should be two:
- - The first cell is the GPIO line number
- - The second cell is used to specify polarity
-- interrupt-controller : Marks the device node as an interrupt controller
-- #interrupt-cells : Should be two:
- - The first cell is an interrupt number within
- 0..9 range, for GPIO pin interrupts it is equal
- to 'nxp,gpio-pin-interrupt' property value of
- GPIO pin configuration, 8 is for GPIO GROUP0
- interrupt, 9 is for GPIO GROUP1 interrupt
- - The second cell is used to specify interrupt type
-
-Optional properties:
-- gpio-ranges : Mapping between GPIO and pinctrl
-
-Example:
-#define LPC_GPIO(port, pin) (port * 32 + pin)
-#define LPC_PIN(port, pin) (0x##port * 32 + pin)
-
-gpio: gpio@400f4000 {
- compatible = "nxp,lpc1850-gpio";
- reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
- <0x40088000 0x1000>, <0x40089000 0x1000>;
- reg-names = "gpio", "gpio-pin-ic",
- "gpio-group0-ic", "gpio-gpoup1-ic";
- clocks = <&ccu1 CLK_CPU_GPIO>;
- resets = <&rgu 28>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>,
- ...
- <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>;
-};
-
-gpio_joystick {
- compatible = "gpio-keys";
- ...
-
- button0 {
- ...
- interrupt-parent = <&gpio>;
- interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
- gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,lpc1850-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx/43xx GPIO controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-gpio
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: gpio
+ - const: gpio-pin-ic
+ - const: gpio-group0-ic
+ - const: gpio-gpoup1-ic
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description: |
+ - The first cell is an interrupt number within
+ 0..9 range, for GPIO pin interrupts it is equal
+ to 'nxp,gpio-pin-interrupt' property value of
+ GPIO pin configuration, 8 is for GPIO GROUP0
+ interrupt, 9 is for GPIO GROUP1 interrupt
+ - The second cell is used to specify interrupt type
+
+ gpio-ranges: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ gpio@400f4000 {
+ compatible = "nxp,lpc1850-gpio";
+ reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
+ <0x40088000 0x1000>, <0x40089000 0x1000>;
+ reg-names = "gpio", "gpio-pin-ic", "gpio-group0-ic", "gpio-gpoup1-ic";
+ clocks = <&ccu1 CLK_CPU_GPIO>;
+ resets = <&rgu 28>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/pisosr-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Parallel-in/Serial-out Shift Register GPIO Driver
+
+description:
+ This binding describes generic parallel-in/serial-out shift register
+ devices that can be used for GPI (General Purpose Input). This includes
+ SN74165 serial-out shift registers and the SN65HVS88x series of
+ industrial serializers.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - pisosr-gpio
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ ngpios:
+ maximum: 32
+ default: 8
+
+ load-gpios:
+ description:
+ GPIO pin specifier attached to load enable, this
+ pin is pulsed before reading from the device to
+ load input pin values into the device.
+
+ spi-cpol: true
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@0 {
+ compatible = "pisosr-gpio";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+ };
required:
- compatible
- reg
- - interrupts
- - interrupt-controller
- - "#interrupt-cells"
- clocks
- "#gpio-cells"
- gpio-controller
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/qca,ar7100-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
+
+maintainers:
+ - Alban Bedel <albeu@free.fr>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: qca,ar9132-gpio
+ - const: qca,ar7100-gpio
+ - enum:
+ - qca,ar7100-gpio
+ - qca,ar9340-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ ngpios: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - ngpios
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@18040000 {
+ compatible = "qca,ar9132-gpio", "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+ ngpios = <22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
"#interrupt-cells":
const: 2
+ power-domains:
+ maxItems: 1
+
patternProperties:
"^.+-hog(-[0-9]+)?$":
type: object
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Rockchip RK3328 General Register Files GPIO controller
-
-description:
- The Rockchip RK3328 General Register File (GRF) outputs only the
- GPIO_MUTE pin, originally for codec mute control, but it can also be used
- for general purpose. It is manipulated by the GRF_SOC_CON10 register.
- If needed in the future support for the HDMI pins can also be added.
- The GPIO node should be declared as the child of the GRF node.
-
- The GPIO_MUTE pin is referred to in the format
-
- <&grf_gpio 0 GPIO_ACTIVE_LOW>
-
- The first cell is the pin number and
- the second cell is used to specify the GPIO polarity
- 0 = Active high
- 1 = Active low
-
-maintainers:
- - Heiko Stuebner <heiko@sntech.de>
-
-properties:
- compatible:
- const: rockchip,rk3328-grf-gpio
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
-
-required:
- - compatible
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- grf_gpio: gpio {
- compatible = "rockchip,rk3328-grf-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
+++ /dev/null
-Synopsys GPIO via CREG (Control REGisters) driver
-
-Required properties:
-- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x".
-- reg : Exactly one register range with length 0x4.
-- #gpio-cells : Since the generic GPIO binding is used, the
- amount of cells must be specified as 2. The first cell is the
- pin number, the second cell is used to specify optional parameters:
- See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-- gpio-controller : Marks the device node as a GPIO controller.
-- ngpios: Number of GPIO pins.
-
-Example:
-
-gpio: gpio@f00014b0 {
- compatible = "snps,creg-gpio-hsdk";
- reg = <0xf00014b0 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <2>;
-};
+++ /dev/null
-=== ST Microelectronics SPEAr SPI CS Driver ===
-
-SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
-Cell spi controller through its system registers, which otherwise remains under
-PL022 control. If chipselect remain under PL022 control then they would be
-released as soon as transfer is over and TxFIFO becomes empty. This is not
-desired by some of the device protocols above spi which expect (multiple)
-transfers without releasing their chipselects.
-
-Chipselects can be controlled by software by turning them as GPIOs. SPEAr
-provides another interface through system registers through which software can
-directly control each PL022 chipselect. Hence, it is natural for SPEAr to export
-the control of this interface as gpio.
-
-Required properties:
-
- * compatible: should be defined as "st,spear-spics-gpio"
- * reg: mentioning address range of spics controller
- * st-spics,peripcfg-reg: peripheral configuration register offset
- * st-spics,sw-enable-bit: bit offset to enable sw control
- * st-spics,cs-value-bit: bit offset to drive chipselect low or high
- * st-spics,cs-enable-mask: chip select number bit mask
- * st-spics,cs-enable-shift: chip select number program offset
- * gpio-controller: Marks the device node as gpio controller
- * #gpio-cells: should be 1 and will mention chip select number
-
-All the above bit offsets are within peripcfg register.
-
-Example:
--------
-spics: spics@e0700000{
- compatible = "st,spear-spics-gpio";
- reg = <0xe0700000 0x1000>;
- st-spics,peripcfg-reg = <0x3b0>;
- st-spics,sw-enable-bit = <12>;
- st-spics,cs-value-bit = <11>;
- st-spics,cs-enable-mask = <3>;
- st-spics,cs-enable-shift = <8>;
- gpio-controller;
- #gpio-cells = <2>;
-};
-
-
-spi0: spi@e0100000 {
- num-cs = <3>;
- cs-gpios = <&gpio1 7 0>, <&spics 0>,
- <&spics 1>;
- ...
-}
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,spear-spics-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics SPEAr SPI CS GPIO Controller
+
+maintainers:
+ - Viresh Kumar <vireshk@kernel.org>
+
+description: >
+ SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
+ Cell spi controller through its system registers, which otherwise remains
+ under PL022 control. If chipselect remain under PL022 control then they would
+ be released as soon as transfer is over and TxFIFO becomes empty. This is not
+ desired by some of the device protocols above spi which expect (multiple)
+ transfers without releasing their chipselects.
+
+ Chipselects can be controlled by software by turning them as GPIOs. SPEAr
+ provides another interface through system registers through which software can
+ directly control each PL022 chipselect. Hence, it is natural for SPEAr to
+ export the control of this interface as gpio.
+
+properties:
+ compatible:
+ const: st,spear-spics-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ st-spics,peripcfg-reg:
+ description: Offset of the peripcfg register.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ st-spics,sw-enable-bit:
+ description: Bit offset to enable software chipselect control.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ st-spics,cs-value-bit:
+ description: Bit offset to drive chipselect low or high.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ st-spics,cs-enable-mask:
+ description: Bitmask selecting which chipselects to enable.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ st-spics,cs-enable-shift:
+ description: Bit shift for programming chipselect number.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - st-spics,peripcfg-reg
+ - st-spics,sw-enable-bit
+ - st-spics,cs-value-bit
+ - st-spics,cs-enable-mask
+ - st-spics,cs-enable-shift
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@e0700000 {
+ compatible = "st,spear-spics-gpio";
+ reg = <0xe0700000 0x1000>;
+ st-spics,peripcfg-reg = <0x3b0>;
+ st-spics,sw-enable-bit = <12>;
+ st-spics,cs-value-bit = <11>;
+ st-spics,cs-enable-mask = <3>;
+ st-spics,cs-enable-shift = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/ti,keystone-dsp-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone 2 DSP GPIO controller
+
+maintainers:
+ - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+ HOST OS userland running on ARM can send interrupts to DSP cores using
+ the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
+ This is one of the component used by the IPC mechanism used on Keystone SOCs.
+
+ For example TCI6638K2K SoC has 8 DSP GPIO controllers:
+ - 8 for C66x CorePacx CPUs 0-7
+
+ Keystone 2 DSP GPIO controller has specific features:
+ - each GPIO can be configured only as output pin;
+ - setting GPIO value to 1 causes IRQ generation on target DSP core;
+ - reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
+ pending.
+
+properties:
+ compatible:
+ const: ti,keystone-dsp-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio,syscon-dev:
+ description:
+ Phandle and offset of device's specific registers within the syscon state
+ control registers
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to syscon
+ - description: register offset within state control registers
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio,syscon-dev
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@240 {
+ compatible = "ti,keystone-dsp-gpio";
+ reg = <0x240 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <&devctrl 0x240>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,twl4030-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TWL4030 GPIO controller
+
+maintainers:
+ - Aaro Koskinen <aaro.koskinen@iki.fi>
+ - Andreas Kemnade <andreas@kemnade.info>
+ - Kevin Hilman <khilman@baylibre.com>
+ - Roger Quadros <rogerq@kernel.org>
+ - Tony Lindgren <tony@atomide.com>
+
+properties:
+ compatible:
+ const: ti,twl4030-gpio
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+ ti,debounce:
+ description: Debounce control bits. Each bit corresponds to a GPIO pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,mmc-cd:
+ description: MMC card detect control bits. Each bit corresponds to a GPIO pin for VMMC(n+1).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,pullups:
+ description: Pull-up control bits. Each bit corresponds to a GPIO pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,pulldowns:
+ description: Pull-down control bits. Each bit corresponds to a GPIO pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,use-leds:
+ type: boolean
+ description: Enables LEDA and LEDB outputs if set
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio {
+ compatible = "ti,twl4030-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ ti,use-leds;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/trivial-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trivial 2-cell GPIO controllers
+
+maintainers:
+ - Bartosz Golaszewski <brgl@bgdev.pl>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - cirrus,ep7312-gpio
+ - const: cirrus,ep7209-gpio
+ - enum:
+ - apm,xgene-gpio
+ - cirrus,ep7209-gpio
+ - cznic,moxtet-gpio
+ - dlg,slg7xl45106
+ - fcs,fxl6408
+ - gateworks,pld-gpio
+ - ibm,ppc4xx-gpio
+ - loongson,ls1x-gpio
+ - maxim,max77620
+ - nintendo,hollywood-gpio
+ - nxp,pca9570
+ - nxp,pca9571
+ - rockchip,rk3328-grf-gpio
+ - snps,creg-gpio-hsdk
+ - technologic,ts4800-gpio
+ - technologic,ts4900-gpio
+ - technologic,ts7970-gpio
+ - ti,741g125 # for 741G125 (1-bit Input),
+ - ti,741g174 # for 741G74 (1-bit Output),
+ - ti,742g125 # for 742G125 (2-bit Input),
+ - ti,7474 # for 7474 (2-bit Output),
+ - ti,74125 # for 74125 (4-bit Input),
+ - ti,74175 # for 74175 (4-bit Output),
+ - ti,74365 # for 74365 (6-bit Input),
+ - ti,74174 # for 74174 (6-bit Output),
+ - ti,74244 # for 74244 (8-bit Input),
+ - ti,74273 # for 74273 (8-bit Output),
+ - ti,741624 # for 741624 (16-bit Input),
+ - ti,7416374 # for 7416374 (16-bit Output).
+ - ti,lp3943-gpio
+ - ti,palmas-gpio
+ - ti,tpic2810
+ - ti,tps80036-gpio
+ - ti,tps65913-gpio
+ - ti,tps65914-gpio
+
+ reg:
+ maxItems: 1
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ gpio-line-names: true
+
+ ngpios: true
+
+ # Don't add more properties
+
+patternProperties:
+ "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+ type: object
+ required:
+ - gpio-hog
+
+required:
+ - compatible
+ - '#gpio-cells'
+ - gpio-controller
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - maxim,max77620
+ - rockchip,rk3328-grf-gpio
+ - ti,lp3943-gpio
+ - ti,palmas-gpio
+ - ti,tps80036-gpio
+ - ti,tps65913-gpio
+ - ti,tps65914-gpio
+ then:
+ properties:
+ reg: false
+ else:
+ required:
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@1701c000 {
+ compatible = "apm,xgene-gpio";
+ reg = <0x1701c000 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
required:
- reg
- compatible
+ - clocks
- gpio-controller
- "#gpio-cells"
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/apple,agx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC GPU
+
+maintainers:
+ - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - apple,agx-g13g
+ - apple,agx-g13s
+ - apple,agx-g14g
+ - items:
+ - enum:
+ - apple,agx-g13c
+ - apple,agx-g13d
+ - const: apple,agx-g13s
+
+ reg:
+ items:
+ - description: GPU coprocessor control registers
+ - description: GPU block MMIO registers
+
+ reg-names:
+ items:
+ - const: asc
+ - const: sgx
+
+ power-domains:
+ maxItems: 1
+
+ mboxes:
+ maxItems: 1
+
+ memory-region:
+ items:
+ - description: Region containing GPU MMU TTBs
+ - description: Region containing GPU MMU page tables
+ - description:
+ Region containing a shared handoff structure for VM
+ management coordination
+ - description: Calibration blob. Mostly power-related configuration
+ - description: Calibration blob. Mostly GPU-related configuration
+ - description: Shared global variables with GPU firmware
+
+ memory-region-names:
+ items:
+ - const: ttbs
+ - const: pagetables
+ - const: handoff
+ - const: hw-cal-a
+ - const: hw-cal-b
+ - const: globals
+
+ apple,firmware-abi:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ description:
+ macOS version the current firmware is paired with, used to pick
+ the version of firmware ABI to be used.
+ Bootloader will overwrite this
+
+required:
+ - compatible
+ - reg
+ - mboxes
+ - memory-region
+ - apple,firmware-abi
+
+additionalProperties: false
+
+examples:
+ - |
+ gpu@6400000 {
+ compatible = "apple,agx-g13g";
+ reg = <0x6400000 0x40000>,
+ <0x4000000 0x1000000>;
+ reg-names = "asc", "sgx";
+ mboxes = <&agx_mbox>;
+ power-domains = <&ps_gfx>;
+ memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+ <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+ memory-region-names = "ttbs", "pagetables", "handoff",
+ "hw-cal-a", "hw-cal-b", "globals";
+
+ apple,firmware-abi = <0 0 0>;
+ };
+...
- const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
- items:
- enum:
+ - allwinner,sun55i-a523-mali
- mediatek,mt8188-mali
- mediatek,mt8192-mali
+ - mediatek,mt8370-mali
- const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
reg:
properties:
compatible:
contains:
- const: mediatek,mt8186-mali
+ enum:
+ - mediatek,mt8186-mali
+ - mediatek,mt8370-mali
then:
properties:
power-domains:
- hisilicon,hi6220-mali
- mediatek,mt7623-mali
- rockchip,rk3328-mali
+ - rockchip,rk3528-mali
- const: arm,mali-450
# "arm,mali-300"
- rockchip,rk3188-mali
- rockchip,rk3228-mali
- rockchip,rk3328-mali
+ - rockchip,rk3528-mali
then:
required:
- resets
Control and Fault Recording
maintainers:
- - Alexandru Tachici <alexandru.tachici@analog.com>
+ - Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
description: |
Analog Devices ADM1266 Cascadable Super Sequencer with Margin
title: Linear Technology 2992 Power Monitor
maintainers:
- - Alexandru Tachici <alexandru.tachici@analog.com>
+ - Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
description: |
Linear Technology 2992 Dual Wide Range Power Monitor
default: 1
"#pwm-cells":
- const: 4
+ oneOf:
+ - const: 3
+ - const: 4
+ deprecated: true
description: |
Number of cells in a PWM specifier.
- 0: The PWM channel
- 11363636 (88 Hz)
- 44444 (22 kHz)
- 2: PWM flags 0 or PWM_POLARITY_INVERTED
- - 3: The default PWM duty cycle in nanoseconds
+ - 3: The default PWM duty cycle in nanoseconds, defaults to period.
patternProperties:
"^adi,bypass-attenuator-in[0-4]$":
adi,bypass-attenuator-in1 = <0>;
adi,pin10-function = "smbalert#";
adi,pin14-function = "tach4";
- #pwm-cells = <4>;
+ #pwm-cells = <3>;
- /* PWMs at 22.5 kHz frequency, 50% duty*/
+ /* PWMs at 22.5 kHz frequency */
fan-0 {
- pwms = <&pwm 0 44444 0 22222>;
+ pwms = <&pwm 0 44444 0>;
};
fan-1 {
- pwms = <&pwm 2 44444 0 22222>;
+ pwms = <&pwm 2 44444 0>;
};
};
};
- lltc,ltc3886
- lltc,ltc3887
- lltc,ltc3889
+ - lltc,ltc7132
- lltc,ltc7841
- lltc,ltc7880
- lltc,ltm2987
* ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
* ltc2978 : vout0 - vout7
* ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+ * ltc7132 : vout0 - vout1
* ltc7841 : vout0
* ltc7880 : vout0 - vout1
* ltc3883 : vout0
properties:
compatible:
enum:
+ - maxim,max20710
- maxim,max20730
- maxim,max20734
- maxim,max20743
- dallas,max6646
- dallas,max6647
- dallas,max6649
+ - dallas,max6654
- dallas,max6657
- dallas,max6658
- dallas,max6659
- nuvoton,nct7717
- nuvoton,nct7718
- nxp,sa56004
+ - onnn,nct72
+ - onnn,nct214
+ - onnn,nct218
- onnn,nct1008
- ti,tmp451
- ti,tmp461
- dallas,max6646
- dallas,max6647
- dallas,max6649
+ - dallas,max6654
- dallas,max6657
- dallas,max6658
- dallas,max6659
- adi,adt7461
- adi,adt7461a
- adi,adt7481
+ - onnn,nct72
+ - onnn,nct214
+ - onnn,nct218
- onnn,nct1008
then:
patternProperties:
- Radu Sabau <radu.sabau@analog.com>
description: |
- The ADP1050 is used to monitor system voltages, currents and temperatures.
+ The ADP1050 and similar devices are used to monitor system voltages,
+ currents, power, and temperatures.
+
Through the PMBus interface, the ADP1050 targets isolated power supplies
and has four individual monitors for input/output voltage, input current
and temperature.
Datasheet:
https://www.analog.com/en/products/adp1050.html
+ https://www.analog.com/en/products/adp1051.html
+ https://www.analog.com/en/products/adp1055.html
+ https://www.analog.com/en/products/ltp8800-1a.html
+ https://www.analog.com/en/products/ltp8800-2.html
+ https://www.analog.com/en/products/ltp8800-4a.html
properties:
compatible:
- const: adi,adp1050
+ enum:
+ - adi,adp1050
+ - adi,adp1051
+ - adi,adp1055
+ - adi,ltp8800
reg:
maxItems: 1
- renesas,raa228228
- renesas,raa229001
- renesas,raa229004
+ - renesas,raa229621
reg:
maxItems: 1
properties:
compatible:
enum:
+ - ti,ucd9000
+ - ti,ucd9090
+ - ti,ucd90120
+ - ti,ucd90124
+ - ti,ucd90160
- ti,ucd90320
+ - ti,ucd90910
reg:
maxItems: 1
$ref: fan-common.yaml#
unevaluatedProperties: false
+ properties:
+ cooling-levels:
+ description: PWM duty cycle values corresponding to thermal cooling states.
+ items:
+ maximum: 255
+
"#pwm-cells":
const: 2
description: |
- ti,ina219
- ti,ina220
- ti,ina226
+ - ti,ina228
- ti,ina230
- ti,ina231
- ti,ina233
- ti,ina219
- ti,ina220
- ti,ina226
+ - ti,ina228
- ti,ina230
- ti,ina231
- ti,ina237
properties:
compatible:
- const: ti,lm87
+ enum:
+ - adi,adm1024
+ - ti,lm87
reg:
maxItems: 1
compatible:
items:
- enum:
+ - apple,s5l8960x-i2c
+ - apple,t7000-i2c
+ - apple,s8000-i2c
+ - apple,t8010-i2c
+ - apple,t8015-i2c
- apple,t8103-i2c
- apple,t8112-i2c
- apple,t6000-i2c
- items:
- enum:
- google,gs101-hsi2c
+ - samsung,exynos2200-hsi2c
- samsung,exynos850-hsi2c
- const: samsung,exynosautov9-hsi2c
- const: samsung,exynos5-hsi2c # Exynos5250 and Exynos5420
(t(f) in the I2C specification). If not specified we will use the SCL
value since they are the same in nearly all cases.
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
interrupts:
maxItems: 1
+ clocks:
+ maxItems: 1
+
clock-frequency:
default: 100000
- Chris Brandt <chris.brandt@renesas.com>
- Wolfram Sang <wsa+renesas@sang-engineering.com>
-allOf:
- - $ref: /schemas/i2c/i2c-controller.yaml#
-
properties:
compatible:
oneOf:
- renesas,riic-r9a09g056 # RZ/V2N
- const: renesas,riic-r9a09g057 # RZ/V2H(P)
- - const: renesas,riic-r9a09g057 # RZ/V2H(P)
+ - enum:
+ - renesas,riic-r9a09g057 # RZ/V2H(P)
+ - renesas,riic-r9a09g077 # RZ/T2H
+
+ - items:
+ - const: renesas,riic-r9a09g087 # RZ/N2H
+ - const: renesas,riic-r9a09g077 # RZ/T2H
reg:
maxItems: 1
interrupts:
- items:
- - description: Transmit End Interrupt
- - description: Receive Data Full Interrupt
- - description: Transmit Data Empty Interrupt
- - description: Stop Condition Detection Interrupt
- - description: Start Condition Detection Interrupt
- - description: NACK Reception Interrupt
- - description: Arbitration-Lost Interrupt
- - description: Timeout Interrupt
+ oneOf:
+ - items:
+ - description: Transmit End Interrupt
+ - description: Receive Data Full Interrupt
+ - description: Transmit Data Empty Interrupt
+ - description: Stop Condition Detection Interrupt
+ - description: Start Condition Detection Interrupt
+ - description: NACK Reception Interrupt
+ - description: Arbitration-Lost Interrupt
+ - description: Timeout Interrupt
+ - items:
+ - description: Transfer Error Or Event Generation
+ - description: Receive Data Full Interrupt
+ - description: Transmit Data Empty Interrupt
+ - description: Transmit End Interrupt
interrupt-names:
- items:
- - const: tei
- - const: ri
- - const: ti
- - const: spi
- - const: sti
- - const: naki
- - const: ali
- - const: tmoi
+ oneOf:
+ - items:
+ - const: tei
+ - const: ri
+ - const: ti
+ - const: spi
+ - const: sti
+ - const: naki
+ - const: ali
+ - const: tmoi
+ - items:
+ - const: eei
+ - const: rxi
+ - const: txi
+ - const: tei
clock-frequency:
description:
- '#address-cells'
- '#size-cells'
-if:
- properties:
- compatible:
- contains:
- enum:
- - renesas,riic-r9a07g043
- - renesas,riic-r9a07g044
- - renesas,riic-r9a07g054
- - renesas,riic-r9a09g057
-then:
- required:
- - resets
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,riic-r9a09g077
+ then:
+ properties:
+ interrupts:
+ maxItems: 4
+ interrupt-names:
+ maxItems: 4
+ resets: false
+ else:
+ properties:
+ interrupts:
+ minItems: 8
+ interrupt-names:
+ minItems: 8
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,riic-r9a07g043
+ - renesas,riic-r9a07g044
+ - renesas,riic-r9a07g054
+ - renesas,riic-r9a09g057
+ then:
+ required:
+ - resets
unevaluatedProperties: false
maintainers:
- Troy Mitchell <troymitchell988@gmail.com>
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
properties:
compatible:
const: spacemit,k1-i2c
properties:
compatible:
- const: cdns,i3c-master
+ oneOf:
+ - const: cdns,i3c-master
+ - items:
+ - enum:
+ - axiado,ax3000-i3c
+ - const: cdns,i3c-master
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/renesas,i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G3S and RZ/G3E I3C Bus Interface
+
+maintainers:
+ - Wolfram Sang <wsa+renesas@sang-engineering.com>
+ - Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a08g045-i3c # RZ/G3S
+ - renesas,r9a09g047-i3c # RZ/G3E
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Non-recoverable internal error interrupt
+ - description: Normal transfer error interrupt
+ - description: Normal transfer abort interrupt
+ - description: Normal response status buffer full interrupt
+ - description: Normal command buffer empty interrupt
+ - description: Normal IBI status buffer full interrupt
+ - description: Normal Rx data buffer full interrupt
+ - description: Normal Tx data buffer empty interrupt
+ - description: Normal receive status buffer full interrupt
+ - description: START condition detection interrupt
+ - description: STOP condition detection interrupt
+ - description: Transmit end interrupt
+ - description: NACK detection interrupt
+ - description: Arbitration lost interrupt
+ - description: Timeout detection interrupt
+ - description: Wake-up condition detection interrupt
+ - description: HDR Exit Pattern detection interrupt
+ minItems: 16
+
+ interrupt-names:
+ items:
+ - const: ierr
+ - const: terr
+ - const: abort
+ - const: resp
+ - const: cmd
+ - const: ibi
+ - const: rx
+ - const: tx
+ - const: rcv
+ - const: st
+ - const: sp
+ - const: tend
+ - const: nack
+ - const: al
+ - const: tmo
+ - const: wu
+ - const: exit
+ minItems: 16
+
+ clocks:
+ items:
+ - description: APB bus clock
+ - description: transfer clock
+ - description: SFRs clock
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: tclk
+ - const: pclkrw
+ minItems: 2
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: Reset signal
+ - description: APB interface reset signal/SCAN reset signal
+
+ reset-names:
+ items:
+ - const: presetn
+ - const: tresetn
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clock-names
+ - clocks
+ - power-domains
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: i3c.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a08g045-i3c
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ maxItems: 2
+ interrupts:
+ minItems: 17
+ interrupt-names:
+ minItems: 17
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a09g047-i3c
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ clock-names:
+ minItems: 3
+ interrupts:
+ maxItems: 16
+ interrupt-names:
+ maxItems: 16
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a08g045-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i3c@1005b000 {
+ compatible = "renesas,r9a08g045-i3c";
+ reg = <0x1005b000 0x1000>;
+ clocks = <&cpg CPG_MOD R9A08G045_I3C_PCLK>,
+ <&cpg CPG_MOD R9A08G045_I3C_TCLK>;
+ clock-names = "pclk", "tclk";
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ierr", "terr", "abort", "resp",
+ "cmd", "ibi", "rx", "tx", "rcv",
+ "st", "sp", "tend", "nack",
+ "al", "tmo", "wu", "exit";
+ resets = <&cpg R9A08G045_I3C_PRESETN>,
+ <&cpg R9A08G045_I3C_TRESETN>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4080.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4080 20-Bit, 40 MSPS, Differential SAR ADC
+
+maintainers:
+ - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+ The AD4080 is a high speed, low noise, low distortion, 20-bit, Easy Drive,
+ successive approximation register (SAR) analog-to-digital converter (ADC).
+ Maintaining high performance (signal-to-noise and distortion (SINAD) ratio
+ > 90 dBFS) at signal frequencies in excess of 1 MHz enables the AD4080 to
+ service a wide variety of precision, wide bandwidth data acquisition
+ applications.
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4080.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,ad4080
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ description: Configuration of the SPI bus.
+ maximum: 50000000
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: cnv
+
+ vdd33-supply: true
+
+ vdd11-supply: true
+
+ vddldo-supply: true
+
+ iovdd-supply: true
+
+ vrefin-supply: true
+
+ io-backends:
+ maxItems: 1
+
+ adi,lvds-cnv-enable:
+ description: Enable the LVDS signal type on the CNV pin. Default is CMOS.
+ type: boolean
+
+ adi,num-lanes:
+ description:
+ Number of lanes on which the data is sent on the output (DA, DB pins).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+ default: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - vdd33-supply
+ - vrefin-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad4080";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ vdd33-supply = <&vdd33>;
+ vddldo-supply = <&vddldo>;
+ vrefin-supply = <&vrefin>;
+ clocks = <&cnv>;
+ clock-names = "cnv";
+ io-backends = <&iio_backend>;
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4170-4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4170-4 and similar Analog to Digital Converters
+
+maintainers:
+ - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+ Analog Devices AD4170-4 series of Sigma-delta Analog to Digital Converters.
+ Specifications can be found at:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4190-4.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad4195-4.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+$defs:
+ reference-buffer:
+ description: |
+ Enable precharge buffer, full buffer, or skip reference buffering of
+ the positive/negative voltage reference. Because the output impedance
+ of the source driving the voltage reference inputs may be dynamic,
+ resistive/capacitive combinations of those inputs can cause DC gain
+ errors if the reference inputs go unbuffered into the ADC. Enable
+ reference buffering if the provided reference source has dynamic high
+ impedance output. Note the absolute voltage allowed on REFINn+ and REFINn-
+ inputs is from AVSS - 50 mV to AVDD + 50 mV when the reference buffers are
+ disabled but narrows to AVSS to AVDD when reference buffering is enabled
+ or in precharge mode.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ precharge, full, disabled ]
+ default: full
+
+properties:
+ compatible:
+ enum:
+ - adi,ad4170-4
+ - adi,ad4190-4
+ - adi,ad4195-4
+
+ avss-supply:
+ description:
+ Reference voltage supply for AVSS. A −2.625V minimum and 0V maximum supply
+ that powers the chip. If not provided, AVSS is assumed to be at system
+ ground (0V).
+
+ avdd-supply:
+ description:
+ A supply of 4.75V to 5.25V relative to AVSS that powers the chip (AVDD).
+
+ iovdd-supply:
+ description: 1.7V to 5.25V reference supply to the serial interface (IOVDD).
+
+ refin1p-supply:
+ description: REFIN+ supply that can be used as reference for conversion.
+
+ refin1n-supply:
+ description: REFIN- supply that can be used as reference for conversion.
+
+ refin2p-supply:
+ description: REFIN2+ supply that can be used as reference for conversion.
+
+ refin2n-supply:
+ description: REFIN2- supply that can be used as reference for conversion.
+
+ spi-cpol: true
+
+ spi-cpha: true
+
+ interrupts:
+ description:
+ Interrupt for signaling the completion of conversion results. The data
+ ready signal (RDY) used as interrupt is by default provided on the SDO
+ pin. Alternatively, it can be provided on the DIG_AUX1 pin in which case
+ the chip disables the RDY function on SDO. Thus, there can be only one
+ data ready interrupt enabled at a time.
+
+ interrupt-names:
+ description:
+ Specify which pin should be configured as Data Ready interrupt.
+ enum:
+ - sdo
+ - dig_aux1
+
+ clocks:
+ maxItems: 1
+ description:
+ Optional external clock source. Can specify either an external clock or
+ external crystal.
+
+ clock-names:
+ enum:
+ - ext-clk
+ - xtal
+ default: ext-clk
+
+ '#clock-cells':
+ const: 0
+
+ clock-output-names:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ The first cell is for the GPIO number: 0 to 3.
+ The second cell takes standard GPIO flags.
+
+ ldac-gpios:
+ description:
+ GPIO connected to DIG_AUX2 pin to be used as LDAC toggle to control the
+ transfer of data from the DAC_INPUT_A register to the DAC.
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ adi,vbias-pins:
+ description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 9
+ items:
+ minimum: 0
+ maximum: 8
+
+allOf:
+ # Some devices don't have integrated DAC
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad4190-4
+ - adi,ad4195-4
+ then:
+ properties:
+ ldac-gpios: false
+
+ # Require to specify the interrupt pin when using interrupts
+ - if:
+ required:
+ - interrupts
+ then:
+ required:
+ - interrupt-names
+
+ # If an external clock is set, the internal clock cannot go out and vice versa
+ - oneOf:
+ - required: [clocks]
+ properties:
+ '#clock-cells': false
+ - required: ['#clock-cells']
+ properties:
+ clocks: false
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - iovdd-supply
+ - spi-cpol
+ - spi-cpha
+
+unevaluatedProperties: false
+
+patternProperties:
+ "^channel@[0-9a-f]$":
+ $ref: /schemas/iio/adc/adc.yaml#
+ unevaluatedProperties: false
+ description:
+ Represents the external channels which are connected to the ADC.
+
+ properties:
+ reg:
+ description:
+ The channel number.
+ minimum: 0
+ maximum: 15
+
+ diff-channels:
+ description: |
+ This property is used for defining the inputs of a differential
+ voltage channel. The first value is the positive input and the second
+ value is the negative input of the channel.
+
+ Besides the analog input pins AIN0 to AIN8, there are special inputs
+ that can be selected with the following values:
+ 17: Internal temperature sensor
+ 18: (AVDD-AVSS)/5
+ 19: (IOVDD-DGND)/5
+ 20: DAC output
+ 21: ALDO
+ 22: DLDO
+ 23: AVSS
+ 24: DGND
+ 25: REFIN+
+ 26: REFIN-
+ 27: REFIN2+
+ 28: REFIN2-
+ 29: REFOUT
+ For the internal temperature sensor, use the input number for both
+ inputs (i.e. diff-channels = <17 17>).
+ items:
+ enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 17, 18, 19, 20, 21, 22, 23, 24, 25,
+ 26, 27, 28, 29]
+
+ adi,reference-select:
+ description: |
+ Select the reference source to use when converting on the
+ specific channel. Valid values are:
+ 0: REFIN+/REFIN-
+ 1: REFIN2+/REFIN2−
+ 2: REFOUT/AVSS (internal reference)
+ 3: AVDD/AVSS
+ If not specified, REFOUT/AVSS is used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 1
+
+ adi,positive-reference-buffer:
+ $ref: '#/$defs/reference-buffer'
+
+ adi,negative-reference-buffer:
+ $ref: '#/$defs/reference-buffer'
+
+ adi,sensor-type:
+ description:
+ The AD4170-4 and similar designs have features to aid interfacing with
+ load cell weigh scale, RTD, and thermocouple sensors. Each of those
+ sensor types requires either distinct wiring configuration or
+ external circuitry for proper sensor operation and can use different
+ ADC chip functionality on their setups. A key characteristic of those
+ external sensors is that they must be excited either by voltage supply
+ or by ADC chip excitation signals. The sensor can then be read through
+ a pair of analog inputs. This property specifies which particular
+ sensor type is connected to the ADC so it can be properly setup and
+ handled. Omit this property for conventional (not weigh scale, RTD, or
+ thermocouple) ADC channel setups.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ weighscale, rtd, thermocouple ]
+
+ adi,excitation-pin-0:
+ description:
+ Analog input to apply excitation current to while the channel
+ is active.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 20
+ default: 0
+
+ adi,excitation-pin-1:
+ description:
+ Analog input to apply excitation current to while the channel
+ is active.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 20
+ default: 0
+
+ adi,excitation-pin-2:
+ description:
+ Analog input to apply excitation current to while the channel
+ is active.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 20
+ default: 0
+
+ adi,excitation-pin-3:
+ description:
+ Analog input to apply excitation current to while the channel
+ is active.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 20
+ default: 0
+
+ adi,excitation-current-0-microamp:
+ description:
+ Excitation current in microamperes to be applied to pin specified in
+ adi,excitation-pin-0 while this channel is active.
+ enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+ default: 0
+
+ adi,excitation-current-1-microamp:
+ description:
+ Excitation current in microamperes to be applied to pin specified in
+ adi,excitation-pin-1 while this channel is active.
+ enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+ default: 0
+
+ adi,excitation-current-2-microamp:
+ description:
+ Excitation current in microamperes to be applied to pin specified in
+ adi,excitation-pin-2 while this channel is active.
+ enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+ default: 0
+
+ adi,excitation-current-3-microamp:
+ description:
+ Excitation current in microamperes to be applied to pin specified in
+ adi,excitation-pin-3 while this channel is active.
+ enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+ default: 0
+
+ adi,excitation-ac:
+ type: boolean
+ description:
+ Whether the external sensor has to be AC or DC excited. When omitted,
+ it is DC excited.
+
+ allOf:
+ - oneOf:
+ - required: [single-channel, common-mode-channel]
+ properties:
+ diff-channels: false
+ - required: [diff-channels]
+ properties:
+ single-channel: false
+ common-mode-channel: false
+ # Usual ADC channels don't need external circuitry excitation.
+ - if:
+ not:
+ required:
+ - adi,sensor-type
+ then:
+ properties:
+ adi,excitation-pin-0: false
+ adi,excitation-pin-1: false
+ adi,excitation-pin-2: false
+ adi,excitation-pin-3: false
+ adi,excitation-current-0-microamp: false
+ adi,excitation-current-1-microamp: false
+ adi,excitation-current-2-microamp: false
+ adi,excitation-current-3-microamp: false
+ adi,excitation-ac: false
+ # Weigh scale bridge AC excited with one pair of predefined signals.
+ - if:
+ allOf:
+ - properties:
+ adi,sensor-type:
+ contains:
+ const: weighscale
+ - required:
+ - adi,excitation-ac
+ - adi,excitation-pin-2
+ - adi,excitation-pin-3
+ - not:
+ required:
+ - adi,excitation-current-2-microamp
+ - adi,excitation-current-3-microamp
+ then:
+ properties:
+ adi,excitation-pin-2:
+ const: 19
+ adi,excitation-pin-3:
+ const: 20
+ # Weigh scale bridge AC excited with two pairs of predefined signals.
+ - if:
+ allOf:
+ - properties:
+ adi,sensor-type:
+ contains:
+ const: weighscale
+ - required:
+ - adi,excitation-ac
+ - adi,excitation-pin-0
+ - adi,excitation-pin-1
+ - adi,excitation-pin-2
+ - adi,excitation-pin-3
+ - not:
+ required:
+ - adi,excitation-current-0-microamp
+ - adi,excitation-current-1-microamp
+ - adi,excitation-current-2-microamp
+ - adi,excitation-current-3-microamp
+ then:
+ properties:
+ adi,excitation-pin-0:
+ const: 17
+ adi,excitation-pin-1:
+ const: 18
+ adi,excitation-pin-2:
+ const: 19
+ adi,excitation-pin-3:
+ const: 20
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad4170-4";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ spi-cpol;
+ spi-cpha;
+ avdd-supply = <&avdd>;
+ iovdd-supply = <&iovdd>;
+ clocks = <&clk>;
+ clock-names = "xtal";
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "dig_aux1";
+ adi,vbias-pins = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ // Sample AIN0 with respect to DGND throughout AVDD/DGND input range
+ // Pseudo-differential unipolar
+ channel@0 {
+ reg = <0>;
+ single-channel = <0>;
+ common-mode-channel = <24>;
+ adi,reference-select = <3>;
+ };
+ // Weigh scale sensor
+ channel@1 {
+ reg = <1>;
+ bipolar;
+ diff-channels = <1 2>;
+ adi,reference-select = <0>;
+ adi,positive-reference-buffer = "precharge";
+ adi,negative-reference-buffer = "precharge";
+ adi,sensor-type = "weighscale";
+ adi,excitation-pin-2 = <19>;
+ adi,excitation-pin-3 = <20>;
+ adi,excitation-ac;
+ };
+ // RTD sensor
+ channel@2 {
+ reg = <2>;
+ bipolar;
+ diff-channels = <3 4>;
+ adi,reference-select = <0>;
+ adi,sensor-type = "rtd";
+ adi,excitation-pin-0 = <5>;
+ adi,excitation-pin-1 = <6>;
+ adi,excitation-current-0-microamp = <500>;
+ adi,excitation-current-1-microamp = <500>;
+ adi,excitation-ac;
+ };
+ // Thermocouple sensor
+ channel@3 {
+ reg = <3>;
+ bipolar;
+ diff-channels = <7 8>;
+ adi,reference-select = <0>;
+ adi,sensor-type = "thermocouple";
+ adi,excitation-pin-0 = <18>;
+ adi,excitation-current-0-microamp = <500>;
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad4170-4";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ spi-cpol;
+ spi-cpha;
+ avdd-supply = <&avdd>;
+ iovdd-supply = <&iovdd>;
+ #clock-cells = <0>;
+ clock-output-names = "ad4170-clk16mhz";
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "dig_aux1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ // Sample AIN0 with respect to AIN1 throughout AVDD/AVSS input range
+ // Differential bipolar. If AVSS < 0V, differential true bipolar
+ channel@0 {
+ reg = <0>;
+ bipolar;
+ diff-channels = <0 1>;
+ adi,reference-select = <3>;
+ };
+ // Sample AIN2 with respect to DGND throughout AVDD/DGND input range
+ // Pseudo-differential unipolar
+ channel@1 {
+ reg = <1>;
+ single-channel = <2>;
+ common-mode-channel = <24>;
+ adi,reference-select = <3>;
+ };
+ // Sample AIN3 with respect to 2.5V throughout AVDD/AVSS input range
+ // Pseudo-differential bipolar
+ channel@2 {
+ reg = <2>;
+ bipolar;
+ single-channel = <3>;
+ common-mode-channel = <29>;
+ adi,reference-select = <3>;
+ };
+ // Sample AIN4 with respect to DGND throughout AVDD/AVSS input range
+ // Pseudo-differential bipolar
+ channel@3 {
+ reg = <3>;
+ bipolar;
+ single-channel = <4>;
+ common-mode-channel = <24>;
+ adi,reference-select = <3>;
+ };
+ // Sample AIN5 with respect to 2.5V throughout AVDD/AVSS input range
+ // Pseudo-differential unipolar (AD4170-4 datasheet page 46 example)
+ channel@4 {
+ reg = <4>;
+ single-channel = <5>;
+ common-mode-channel = <29>;
+ adi,reference-select = <3>;
+ };
+ // Sample AIN6 with respect to 2.5V throughout REFIN+/REFIN- input range
+ // Pseudo-differential bipolar
+ channel@5 {
+ reg = <5>;
+ bipolar;
+ single-channel = <6>;
+ common-mode-channel = <29>;
+ adi,reference-select = <0>;
+ };
+ // Weigh scale sensor
+ channel@6 {
+ reg = <6>;
+ bipolar;
+ diff-channels = <7 8>;
+ adi,reference-select = <0>;
+ adi,sensor-type = "weighscale";
+ adi,excitation-pin-0 = <17>;
+ adi,excitation-pin-1 = <18>;
+ adi,excitation-pin-2 = <19>;
+ adi,excitation-pin-3 = <20>;
+ adi,excitation-ac;
+ };
+ };
+ };
+...
spi-max-frequency:
maximum: 25000000
+ spi-3wire: true
+
'#address-cells':
const: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7405.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7405 family
+
+maintainers:
+ - Dragos Bogdan <dragos.bogdan@analog.com>
+ - Pop Ioan Daniel <pop.ioan-daniel@analog.com>
+
+description: |
+ Analog Devices AD7405 is a high performance isolated ADC, 1-channel,
+ 16-bit with a second-order Σ-Δ modulator that converts an analog input signal
+ into a high speed, single-bit data stream.
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad7405.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adum7701.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adum7702.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7703.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7405
+ - adi,adum7701
+ - adi,adum7702
+ - adi,adum7703
+
+ clocks:
+ maxItems: 1
+
+ vdd1-supply: true
+
+ vdd2-supply: true
+
+ io-backends:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - vdd1-supply
+ - vdd2-supply
+ - io-backends
+
+additionalProperties: false
+
+examples:
+ - |
+ adc {
+ compatible = "adi,ad7405";
+ clocks = <&axi_clk_gen 0>;
+ vdd1-supply = <&vdd1>;
+ vdd2-supply = <&vdd2>;
+ io-backends = <&axi_adc>;
+ };
+...
considered a bipolar differential channel. Otherwise it is bipolar
single-ended.
+ adi,rfilter-ohms:
+ description:
+ For ADCs that supports gain calibration, this property must be set to
+ the value of the external RFilter resistor. Proper gain error
+ correction is applied based on this value.
+ default: 0
+ minimum: 0
+ maximum: 64512
+
required:
- reg
- bipolar
properties:
adi,oversampling-ratio-gpios: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7605-4
+ - adi,ad7606-4
+ - adi,ad7606-6
+ - adi,ad7606-8
+ - adi,ad7607
+ - adi,ad7608
+ - adi,ad7609
+ - adi,ad7616
+ then:
+ patternProperties:
+ "^channel@[0-9a-f]+$":
+ properties:
+ adi,rfilter-ohms: false
+
- if:
properties:
compatible:
reg = <8>;
diff-channels = <8 8>;
bipolar;
+ adi,rfilter-ohms = <2048>;
};
};
clock-names:
const: mclk
+ trigger-sources:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 2
+ description: |
+ A list of phandles referencing trigger source providers. Each entry
+ represents a trigger source for the ADC:
+
+ - First entry specifies the device responsible for driving the
+ synchronization (SYNC_IN) pin, as an alternative to adi,sync-in-gpios.
+ This can be a `gpio-trigger` or another `ad7768-1` device. If the
+ device's own SYNC_OUT pin is internally connected to its SYNC_IN pin,
+ reference the device itself or omit this property.
+ - Second entry optionally defines a GPIO3 pin used as a START signal trigger.
+
+ Use the accompanying trigger source cell to identify the type of each entry.
+
interrupts:
+ description:
+ DRDY (Data Ready) pin, which signals conversion results are available.
maxItems: 1
'#address-cells':
in any way, for example if the filter decimation rate changes.
As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+ regulators:
+ type: object
+ description:
+ list of regulators provided by this controller.
+
+ properties:
+ vcm-output:
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
reset-gpios:
maxItems: 1
"#io-channel-cells":
const: 1
+ "#trigger-source-cells":
+ description: |
+ Cell indicates the trigger output signal: 0 = SYNC_OUT, 1 = GPIO3,
+ 2 = DRDY.
+
+ For better readability, macros for these values are available in
+ dt-bindings/iio/adc/adi,ad7768-1.h.
+ const: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ The first cell is for the GPIO number: 0 to 3.
+ The second cell takes standard GPIO flags.
+
required:
- compatible
- reg
- vref-supply
- spi-cpol
- spi-cpha
- - adi,sync-in-gpios
+
+dependencies:
+ adi,sync-in-gpios:
+ not:
+ required:
+ - trigger-sources
+ trigger-sources:
+ not:
+ required:
+ - adi,sync-in-gpios
patternProperties:
"^channel@([0-9]|1[0-5])$":
spi-max-frequency = <2000000>;
spi-cpol;
spi-cpha;
+ gpio-controller;
+ #gpio-cells = <2>;
vref-supply = <&adc_vref>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpio>;
reg = <0>;
label = "channel_0";
};
+
+ regulators {
+ vcm_reg: vcm-output {
+ regulator-name = "ad7768-1-vcm";
+ };
+ };
};
};
...
the ad7606 family.
https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ https://analogdevicesinc.github.io/hdl/library/axi_ad408x/index.html
https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html
http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
compatible:
enum:
- adi,axi-adc-10.0.a
+ - adi,axi-ad408x
- adi,axi-ad7606x
- adi,axi-ad485x
- enum:
- mediatek,mt7623-auxadc
- const: mediatek,mt2701-auxadc
+ - items:
+ - enum:
+ - mediatek,mt7981-auxadc
+ - const: mediatek,mt7986-auxadc
- items:
- enum:
- mediatek,mt6893-auxadc
- mediatek,mt6357-auxadc
- mediatek,mt6358-auxadc
- mediatek,mt6359-auxadc
+ - mediatek,mt6363-auxadc
+ - mediatek,mt6373-auxadc
"#io-channel-cells":
const: 1
interrupts:
maxItems: 1
+ clocks:
+ maxItems: 1
+
vref-supply: true
"#io-channel-cells":
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,spear600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST SPEAr ADC device driver
+
+maintainers:
+ - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+ Integrated ADC inside the ST SPEAr SoC, SPEAr600, supporting
+ 10-bit resolution. Datasheet can be found here:
+ https://www.st.com/resource/en/datasheet/spear600.pdf
+
+properties:
+ compatible:
+ enum:
+ - st,spear600-adc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ sampling-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2500000
+ maximum: 20000000
+ description:
+ Default sampling frequency of the ADC in Hz.
+
+ vref-external:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1000
+ maximum: 2800
+ description:
+ External voltage reference in milli-volts. If omitted the internal voltage
+ reference will be used.
+
+ average-samples:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
+ description:
+ Number of samples to generate an average value. If omitted, single data
+ conversion will be used.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - sampling-frequency
+
+additionalProperties: false
+
+examples:
+ - |
+ adc@d8200000 {
+ compatible = "st,spear600-adc";
+ reg = <0xd8200000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <6>;
+ sampling-frequency = <5000000>;
+ vref-external = <2500>; /* 2.5V VRef */
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/invensense,itg3200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Invensense ITG-3200 Gyroscope
+
+maintainers:
+ - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+ Triple-axis, digital output gyroscope with a three 16-bit analog-to-digital
+ converters (ADCs) for digitizing the gyro outputs, a user-selectable internal
+ low-pass filter bandwidth, and a Fast-Mode I2C.
+
+properties:
+ compatible:
+ const: invensense,itg3200
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+ vlogic-supply: true
+
+ interrupts:
+ maxItems: 1
+
+ mount-matrix:
+ description: an optional 3x3 mounting rotation matrix.
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ext_clock
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gyroscope@68 {
+ compatible = "invensense,itg3200";
+ reg = <0x68>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/nicera,d3323aa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nicera D3-323-AA PIR sensor
+
+maintainers:
+ - Waqar Hameed <waqar.hameed@axis.com>
+
+description: |
+ PIR sensor for human detection.
+ Datasheet: https://www.endrich.com/Datenbl%C3%A4tter/Sensoren/D3-323-AA_e.pdf
+
+properties:
+ compatible:
+ const: nicera,d3323aa
+
+ vdd-supply:
+ description:
+ Supply voltage (1.8 to 5.5 V).
+
+ vout-clk-gpios:
+ maxItems: 1
+ description:
+ GPIO for clock and detection.
+ After reset, the device signals with two falling edges on this pin that it
+ is ready for configuration (within 1.2 s).
+ During configuration, it is used as clock for data reading and writing (on
+ data-gpios).
+ After all this, when device is in operational mode, it signals on this pin
+ for any detections.
+
+ data-gpios:
+ maxItems: 1
+ description:
+ GPIO for data reading and writing. This is denoted "DO (SI)" in datasheet.
+ During configuration, this pin is used for writing and reading
+ configuration data (together with vout-clk-gpios as clock).
+ After this, during operational mode, the device will output serial data on
+ this GPIO.
+
+required:
+ - compatible
+ - vdd-supply
+ - vout-clk-gpios
+ - data-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ proximity {
+ compatible = "nicera,d3323aa";
+ vdd-supply = <®ulator_3v3>;
+ vout-clk-gpios = <&gpio 78 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
+ };
+...
required:
- reg
+ rmi4-f1a@1a:
+ type: object
+ additionalProperties: false
+ $ref: input.yaml#
+ description:
+ RMI4 Function 1A is for capacitive keys.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ linux,keycodes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - reg
+
patternProperties:
"^rmi4-f1[12]@1[12]$":
type: object
examples:
- |
+ #include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
rmi4-f1a@1a {
reg = <0x1a>;
+ linux,keycodes = <KEY_BACK KEY_HOME KEY_MENU>;
};
};
};
- focaltech,ft5452
- focaltech,ft6236
- focaltech,ft8201
+ - focaltech,ft8716
- focaltech,ft8719
reg:
+++ /dev/null
-* NXP LPC32xx SoC Touchscreen Controller (TSC)
-
-Required properties:
-- compatible: must be "nxp,lpc3220-tsc"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: The TSC/ADC interrupt
-
-Example:
-
- tsc@40048000 {
- compatible = "nxp,lpc3220-tsc";
- reg = <0x40048000 0x1000>;
- interrupt-parent = <&mic>;
- interrupts = <39 0>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/nxp,lpc3220-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx SoC Touchscreen Controller (TSC)
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc3220-tsc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc32xx-clock.h>
+
+ touchscreen@40048000 {
+ compatible = "nxp,lpc3220-tsc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <39 0>;
+ clocks = <&clk LPC32XX_CLK_ADC>;
+ };
examples:
- |
+ #include <dt-bindings/input/linux-event-codes.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x55>;
interrupts = <2 0>;
gpios = <&gpio1 166 0>;
+
+ touch-overlay {
+ segment-0 {
+ label = "Touchscreen";
+ x-origin = <0>;
+ x-size = <240>;
+ y-origin = <40>;
+ y-size = <280>;
+ };
+
+ segment-1a {
+ label = "Camera light";
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ x-origin = <40>;
+ x-size = <40>;
+ y-origin = <0>;
+ y-size = <40>;
+ };
+
+ segment-2a {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ x-origin = <160>;
+ x-size = <40>;
+ y-origin = <0>;
+ y-size = <40>;
+ };
+ };
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti.tsc2007.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments tsc2007 touchscreen controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: ti,tsc2007
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ti,x-plate-ohms:
+ description: X-plate resistance in ohms.
+
+ gpios: true
+
+ pendown-gpio: true
+
+ ti,max-rt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum pressure.
+
+ ti,fuzzx:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ specifies the absolute input fuzz x value.
+ If set, it will permit noise in the data up to +- the value given to the fuzz
+ parameter, that is used to filter noise from the event stream.
+
+ ti,fuzzy:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: specifies the absolute input fuzz y value.
+
+ ti,fuzzz:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: specifies the absolute input fuzz z value.
+
+ ti,poll-period:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ how much time to wait (in milliseconds) before reading again the
+ values from the tsc2007.
+
+required:
+ - compatible
+ - reg
+ - ti,x-plate-ohms
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touch@49 {
+ compatible = "ti,tsc2007";
+ reg = <0x49>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <0x0 0x8>;
+ gpios = <&gpio4 0 0>;
+ ti,x-plate-ohms = <180>;
+ };
+ };
touchscreen-y-plate-ohms:
description: Resistance of the Y-plate in Ohms
+ touch-overlay:
+ description: |
+ List of nodes defining segments (touch areas) on the touchscreen.
+
+ This object can be used to describe a series of segments to restrict
+ the region within touch events are reported or buttons with a specific
+ functionality.
+
+ This is of special interest if the touchscreen is shipped with a physical
+ overlay on top of it with a frame that hides some part of the original
+ touchscreen area. Printed buttons on that overlay are also a typical
+ use case.
+
+ A new touchscreen area is defined as a sub-node without a key code. If a
+ key code is defined in the sub-node, it will be interpreted as a button.
+
+ The x-origin and y-origin properties of a touchscreen area define the
+ offset of a new origin from where the touchscreen events are referenced.
+ This offset is applied to the events accordingly. The x-size and y-size
+ properties define the size of the touchscreen effective area.
+
+ The following example shows a new touchscreen area with the new origin
+ (0',0') for the touch events generated by the device.
+
+ Touchscreen (full area)
+ ┌────────────────────────────────────────┐
+ │ ┌───────────────────────────────┐ │
+ │ │ │ │
+ │ ├ y-size │ │
+ │ │ │ │
+ │ │ touchscreen area │ │
+ │ │ (no key code) │ │
+ │ │ │ │
+ │ │ x-size │ │
+ │ ┌└──────────────┴────────────────┘ │
+ │(0',0') │
+ ┌└────────────────────────────────────────┘
+ (0,0)
+
+ where (0',0') = (0+x-origin,0+y-origin)
+
+ Sub-nodes with key codes report the touch events on their surface as key
+ events instead.
+
+ The following example shows a touchscreen with a single button on it.
+
+ Touchscreen (full area)
+ ┌───────────────────────────────────┐
+ │ │
+ │ │
+ │ ┌─────────┐ │
+ │ │button 0 │ │
+ │ │KEY_POWER│ │
+ │ └─────────┘ │
+ │ │
+ │ │
+ ┌└───────────────────────────────────┘
+ (0,0)
+
+ Segments defining buttons and clipped toushcreen areas can be combined
+ as shown in the following example.
+ In that case only the events within the touchscreen area are reported
+ as touch events. Events within the button areas report their associated
+ key code. Any events outside the defined areas are ignored.
+
+ Touchscreen (full area)
+ ┌─────────┬──────────────────────────────┐
+ │ │ │
+ │ │ ┌───────────────────────┐ │
+ │ button 0│ │ │ │
+ │KEY_POWER│ │ │ │
+ │ │ │ │ │
+ ├─────────┤ │ touchscreen area │ │
+ │ │ │ (no key code) │ │
+ │ │ │ │ │
+ │ button 1│ │ │ │
+ │ KEY_INFO│ ┌└───────────────────────┘ │
+ │ │(0',0') │
+ ┌└─────────┴──────────────────────────────┘
+ (0,0)
+
+ type: object
+
+ patternProperties:
+ '^segment-':
+ type: object
+ description:
+ Each segment is represented as a sub-node.
+ properties:
+ x-origin:
+ description: horizontal origin of the node area
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ y-origin:
+ description: vertical origin of the node area
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ x-size:
+ description: horizontal resolution of the node area
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ y-size:
+ description: vertical resolution of the node area
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ label:
+ description: descriptive name of the segment
+ $ref: /schemas/types.yaml#/definitions/string
+
+ linux,code: true
+
+ required:
+ - x-origin
+ - y-origin
+ - x-size
+ - y-size
+
+ unevaluatedProperties: false
+
dependencies:
touchscreen-size-x: [ touchscreen-size-y ]
touchscreen-size-y: [ touchscreen-size-x ]
+++ /dev/null
-* Texas Instruments tsc2007 touchscreen controller
-
-Required properties:
-- compatible: must be "ti,tsc2007".
-- reg: I2C address of the chip.
-- ti,x-plate-ohms: X-plate resistance in ohms.
-
-Optional properties:
-- gpios: the interrupt gpio the chip is connected to (through the penirq pin).
- The penirq pin goes to low when the panel is touched.
- (see GPIO binding[1] for more details).
-- interrupts: (gpio) interrupt to which the chip is connected
- (see interrupt binding[0]).
-- ti,max-rt: maximum pressure.
-- ti,fuzzx: specifies the absolute input fuzz x value.
- If set, it will permit noise in the data up to +- the value given to the fuzz
- parameter, that is used to filter noise from the event stream.
-- ti,fuzzy: specifies the absolute input fuzz y value.
-- ti,fuzzz: specifies the absolute input fuzz z value.
-- ti,poll-period: how much time to wait (in milliseconds) before reading again the
- values from the tsc2007.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
- &i2c1 {
- /* ... */
- tsc2007@49 {
- compatible = "ti,tsc2007";
- reg = <0x49>;
- interrupt-parent = <&gpio4>;
- interrupts = <0x0 0x8>;
- gpios = <&gpio4 0 0>;
- ti,x-plate-ohms = <180>;
- };
-
- /* ... */
- };
properties:
compatible:
- enum:
- - mediatek,mt8183-cci
- - mediatek,mt8186-cci
+ oneOf:
+ - enum:
+ - mediatek,mt8183-cci
+ - mediatek,mt8186-cci
+ - items:
+ - enum:
+ - mediatek,mt7988-cci
+ - const: mediatek,mt8183-cci
clocks:
items:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,milos-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on Milos SoC
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+ RPMh interconnect providers support system bandwidth requirements through
+ RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+ able to communicate with the BCM through the Resource State Coordinator (RSC)
+ associated with each execution environment. Provider nodes must point to at
+ least one RPMh device child node pertaining to their RSC and each provider
+ can map to multiple RPMh resources.
+
+ See also: include/dt-bindings/interconnect/qcom,milos-rpmh.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,milos-aggre1-noc
+ - qcom,milos-aggre2-noc
+ - qcom,milos-clk-virt
+ - qcom,milos-cnoc-cfg
+ - qcom,milos-cnoc-main
+ - qcom,milos-gem-noc
+ - qcom,milos-lpass-ag-noc
+ - qcom,milos-mc-virt
+ - qcom,milos-mmss-noc
+ - qcom,milos-nsp-noc
+ - qcom,milos-pcie-anoc
+ - qcom,milos-system-noc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+
+allOf:
+ - $ref: qcom,rpmh-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,milos-clk-virt
+ - qcom,milos-mc-virt
+ then:
+ properties:
+ reg: false
+ else:
+ required:
+ - reg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,milos-pcie-anoc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: aggre-NOC PCIe AXI clock
+ - description: cfg-NOC PCIe a-NOC AHB clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,milos-aggre1-noc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: aggre USB3 PRIM AXI clock
+ - description: aggre UFS PHY AXI clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,milos-aggre2-noc
+ then:
+ properties:
+ clocks:
+ items:
+ - description: RPMH CC IPA clock
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,milos-aggre1-noc
+ - qcom,milos-aggre2-noc
+ - qcom,milos-pcie-anoc
+ then:
+ required:
+ - clocks
+ else:
+ properties:
+ clocks: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,milos-gcc.h>
+
+ interconnect-0 {
+ compatible = "qcom,milos-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ interconnect@16e0000 {
+ compatible = "qcom,milos-aggre1-noc";
+ reg = <0x016e0000 0x16400>;
+ #interconnect-cells = <2>;
+ clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
minItems: 1
maxItems: 2
+ nonposted-mmio: true
+
required:
- compatible
- interconnects
- qcom,sm8350-epss-l3
- qcom,sm8650-epss-l3
- const: qcom,epss-l3
+ - items:
+ - enum:
+ - qcom,qcs8300-epss-l3
+ - const: qcom,sa8775p-epss-l3
+ - const: qcom,epss-l3
reg:
maxItems: 1
RPMh interconnect providers support system bandwidth requirements through
RPMh hardware accelerators known as Bus Clock Manager (BCM).
- See also:: include/dt-bindings/interconnect/qcom,sa8775p.h
+ See also: include/dt-bindings/interconnect/qcom,sa8775p.h
properties:
compatible:
least one RPMh device child node pertaining to their RSC and each provider
can map to multiple RPMh resources.
- See also:: include/dt-bindings/interconnect/qcom,sar2130p-rpmh.h
+ See also: include/dt-bindings/interconnect/qcom,sar2130p-rpmh.h
properties:
compatible:
RPMh interconnect providers support system bandwidth requirements through
RPMh hardware accelerators known as Bus Clock Manager (BCM).
- See also:: include/dt-bindings/interconnect/qcom,sc7280.h
+ See also: include/dt-bindings/interconnect/qcom,sc7280.h
properties:
compatible:
RPMh interconnect providers support system bandwidth requirements through
RPMh hardware accelerators known as Bus Clock Manager (BCM).
- See also:: include/dt-bindings/interconnect/qcom,sc8280xp.h
+ See also: include/dt-bindings/interconnect/qcom,sc8280xp.h
properties:
compatible:
RPMh interconnect providers support system bandwidth requirements through
RPMh hardware accelerators known as Bus Clock Manager (BCM).
- See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
+ See also: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
allOf:
- $ref: qcom,rpmh-common.yaml#
RPMh interconnect providers support system bandwidth requirements through
RPMh hardware accelerators known as Bus Clock Manager (BCM).
- See also:: include/dt-bindings/interconnect/qcom,sm8450.h
+ See also: include/dt-bindings/interconnect/qcom,sm8450.h
properties:
compatible:
least one RPMh device child node pertaining to their RSC and each provider
can map to multiple RPMh resources.
- See also:: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h
+ See also: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h
properties:
compatible:
least one RPMh device child node pertaining to their RSC and each provider
can map to multiple RPMh resources.
- See also:: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h
+ See also: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h
properties:
compatible:
least one RPMh device child node pertaining to their RSC and each provider
can map to multiple RPMh resources.
- See also:: include/dt-bindings/interconnect/qcom,sm8750-rpmh.h
+ See also: include/dt-bindings/interconnect/qcom,sm8750-rpmh.h
properties:
compatible:
least one RPMh device child node pertaining to their RSC and each provider
can map to multiple RPMh resources.
- See also:: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
+ See also: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
properties:
compatible:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/andestech,plicsw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes machine-level software interrupt controller
+
+description:
+ In the Andes platform such as QiLai SoC, the PLIC module is instantiated a
+ second time with all interrupt sources tied to zero as the software interrupt
+ controller (PLIC_SW). PLIC_SW directly connects to the machine-mode
+ inter-processor interrupt lines of CPUs, so RISC-V per-CPU local interrupt
+ controller is the parent interrupt controller for PLIC_SW. PLIC_SW can
+ generate machine-mode inter-processor interrupts through programming its
+ registers.
+
+maintainers:
+ - Ben Zong-You Xie <ben717@andestech.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - andestech,qilai-plicsw
+ - const: andestech,plicsw
+
+ reg:
+ maxItems: 1
+
+ interrupts-extended:
+ minItems: 1
+ maxItems: 15872
+ description:
+ Specifies which harts are connected to the PLIC_SW. Each item must points
+ to a riscv,cpu-intc node, which has a riscv cpu node as parent.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+
+examples:
+ - |
+ interrupt-controller@400000 {
+ compatible = "andestech,qilai-plicsw", "andestech,plicsw";
+ reg = <0x400000 0x400000>;
+ interrupts-extended = <&cpu0intc 3>,
+ <&cpu1intc 3>,
+ <&cpu2intc 3>,
+ <&cpu3intc 3>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apm,xgene1-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AppliedMicro X-Gene v1 PCIe MSI controller
+
+maintainers:
+ - Toan Le <toan@os.amperecomputing.com>
+
+properties:
+ compatible:
+ const: apm,xgene1-msi
+
+ msi-controller: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 16
+
+required:
+ - compatible
+ - msi-controller
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ msi@79000000 {
+ compatible = "apm,xgene1-msi";
+ msi-controller;
+ reg = <0x79000000 0x900000>;
+ interrupts = <0x0 0x10 0x4>,
+ <0x0 0x11 0x4>,
+ <0x0 0x12 0x4>,
+ <0x0 0x13 0x4>,
+ <0x0 0x14 0x4>,
+ <0x0 0x15 0x4>,
+ <0x0 0x16 0x4>,
+ <0x0 0x17 0x4>,
+ <0x0 0x18 0x4>,
+ <0x0 0x19 0x4>,
+ <0x0 0x1a 0x4>,
+ <0x0 0x1b 0x4>,
+ <0x0 0x1c 0x4>,
+ <0x0 0x1d 0x4>,
+ <0x0 0x1e 0x4>,
+ <0x0 0x1f 0x4>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v5-iwb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 5 Interrupt Wire Bridge (IWB)
+
+maintainers:
+ - Lorenzo Pieralisi <lpieralisi@kernel.org>
+ - Marc Zyngier <maz@kernel.org>
+
+description: |
+ The GICv5 architecture defines the guidelines to implement GICv5
+ compliant interrupt controllers for AArch64 systems.
+
+ The GICv5 specification can be found at
+ https://developer.arm.com/documentation/aes0070
+
+ GICv5 has zero or more Interrupt Wire Bridges (IWB) that are responsible
+ for translating wire signals into interrupt messages to the GICv5 ITS.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: arm,gic-v5-iwb
+
+ reg:
+ items:
+ - description: IWB control frame
+
+ "#address-cells":
+ const: 0
+
+ "#interrupt-cells":
+ description: |
+ The 1st cell corresponds to the IWB wire.
+
+ The 2nd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+ const: 2
+
+ interrupt-controller: true
+
+ msi-parent:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#interrupt-cells"
+ - interrupt-controller
+ - msi-parent
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@2f000000 {
+ compatible = "arm,gic-v5-iwb";
+ reg = <0x2f000000 0x10000>;
+
+ #address-cells = <0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ msi-parent = <&its0 64>;
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 5
+
+maintainers:
+ - Lorenzo Pieralisi <lpieralisi@kernel.org>
+ - Marc Zyngier <maz@kernel.org>
+
+description: |
+ The GICv5 architecture defines the guidelines to implement GICv5
+ compliant interrupt controllers for AArch64 systems.
+
+ The GICv5 specification can be found at
+ https://developer.arm.com/documentation/aes0070
+
+ The GICv5 architecture is composed of multiple components:
+ - one or more IRS (Interrupt Routing Service)
+ - zero or more ITS (Interrupt Translation Service)
+
+ The architecture defines:
+ - PE-Private Peripheral Interrupts (PPI)
+ - Shared Peripheral Interrupts (SPI)
+ - Logical Peripheral Interrupts (LPI)
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: arm,gic-v5
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ "#interrupt-cells":
+ description: |
+ The 1st cell corresponds to the INTID.Type field in the INTID; 1 for PPI,
+ 3 for SPI. LPI interrupts must not be described in the bindings since
+ they are allocated dynamically by the software component managing them.
+
+ The 2nd cell contains the interrupt INTID.ID field.
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+
+ const: 3
+
+ interrupt-controller: true
+
+ interrupts:
+ description:
+ The VGIC maintenance interrupt.
+ maxItems: 1
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - "#interrupt-cells"
+ - interrupt-controller
+
+patternProperties:
+ "^irs@[0-9a-f]+$":
+ type: object
+ description:
+ GICv5 has one or more Interrupt Routing Services (IRS) that are
+ responsible for handling IRQ state and routing.
+
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: arm,gic-v5-irs
+
+ reg:
+ minItems: 1
+ items:
+ - description: IRS config frames
+ - description: IRS setlpi frames
+
+ reg-names:
+ description:
+ Describe config and setlpi frames that are present.
+ "ns-" stands for non-secure, "s-" for secure, "realm-" for realm
+ and "el3-" for EL3.
+ minItems: 1
+ maxItems: 8
+ items:
+ enum: [ ns-config, s-config, realm-config, el3-config, ns-setlpi,
+ s-setlpi, realm-setlpi, el3-setlpi ]
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ dma-noncoherent:
+ description:
+ Present if the GIC IRS permits programming shareability and
+ cacheability attributes but is connected to a non-coherent
+ downstream interconnect.
+
+ cpus:
+ description:
+ CPUs managed by the IRS.
+
+ arm,iaffids:
+ $ref: /schemas/types.yaml#/definitions/uint16-array
+ description:
+ Interrupt AFFinity ID (IAFFID) associated with the CPU whose
+ CPU node phandle is at the same index in the cpus array.
+
+ patternProperties:
+ "^its@[0-9a-f]+$":
+ type: object
+ description:
+ GICv5 has zero or more Interrupt Translation Services (ITS) that are
+ used to route Message Signalled Interrupts (MSI) to the CPUs. Each
+ ITS is connected to an IRS.
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: arm,gic-v5-its
+
+ reg:
+ items:
+ - description: ITS config frames
+
+ reg-names:
+ description:
+ Describe config frames that are present.
+ "ns-" stands for non-secure, "s-" for secure, "realm-" for realm
+ and "el3-" for EL3.
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ ns-config, s-config, realm-config, el3-config ]
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ dma-noncoherent:
+ description:
+ Present if the GIC ITS permits programming shareability and
+ cacheability attributes but is connected to a non-coherent
+ downstream interconnect.
+
+ patternProperties:
+ "^msi-controller@[0-9a-f]+$":
+ type: object
+ description:
+ GICv5 ITS has one or more translate register frames.
+ additionalProperties: false
+
+ properties:
+ reg:
+ items:
+ - description: ITS translate frames
+
+ reg-names:
+ description:
+ Describe translate frames that are present.
+ "ns-" stands for non-secure, "s-" for secure, "realm-" for realm
+ and "el3-" for EL3.
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ ns-translate, s-translate, realm-translate, el3-translate ]
+
+ "#msi-cells":
+ description:
+ The single msi-cell is the DeviceID of the device which will
+ generate the MSI.
+ const: 1
+
+ msi-controller: true
+
+ required:
+ - reg
+ - reg-names
+ - "#msi-cells"
+ - msi-controller
+
+ required:
+ - compatible
+ - reg
+ - reg-names
+
+ required:
+ - compatible
+ - reg
+ - reg-names
+ - cpus
+ - arm,iaffids
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller {
+ compatible = "arm,gic-v5";
+
+ #interrupt-cells = <3>;
+ interrupt-controller;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupts = <1 25 4>;
+
+ irs@2f1a0000 {
+ compatible = "arm,gic-v5-irs";
+ reg = <0x2f1a0000 0x10000>; // IRS_CONFIG_FRAME
+ reg-names = "ns-config";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ arm,iaffids = /bits/ 16 <0 1 2 3 4 5 6 7>;
+
+ its@2f120000 {
+ compatible = "arm,gic-v5-its";
+ reg = <0x2f120000 0x10000>; // ITS_CONFIG_FRAME
+ reg-names = "ns-config";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ msi-controller@2f130000 {
+ reg = <0x2f130000 0x10000>; // ITS_TRANSLATE_FRAME
+ reg-names = "ns-translate";
+
+ #msi-cells = <1>;
+ msi-controller;
+ };
+ };
+ };
+ };
+...
properties:
compatible:
enum:
+ - arm,armv7m-nvic # deprecated
- arm,v6m-nvic
- arm,v7m-nvic
- arm,v8m-nvic
interrupt-controller: true
'#interrupt-cells':
- const: 2
+ enum: [1, 2]
description: |
Number of cells to encode an interrupt source:
first = interrupt number, second = priority.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,icoll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS icoll Interrupt controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx23-icoll
+ - fsl,imx28-icoll
+ - const: fsl,icoll
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@80000000 {
+ compatible = "fsl,imx28-icoll", "fsl,icoll";
+ reg = <0x80000000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,imx8qxp-dc-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller interrupt controller
+
+description: |
+ The Display Controller has a built-in interrupt controller with the following
+ features for all relevant HW events:
+
+ * Enable bit (mask)
+ * Status bit (set by an HW event)
+ * Preset bit (can be used by SW to set status)
+ * Clear bit (used by SW to reset the status)
+
+ Each interrupt can be connected as IRQ (maskable) and/or NMI (non-maskable).
+ Alternatively the un-masked trigger signals for all HW events are provided,
+ allowing it to use a global interrupt controller instead.
+
+ Each interrupt can be protected against SW running in user mode. In that case,
+ only privileged AHB access can control the interrupt status.
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-intc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupts:
+ items:
+ - description: store9 shadow load interrupt(blit engine)
+ - description: store9 frame complete interrupt(blit engine)
+ - description: store9 sequence complete interrupt(blit engine)
+ - description:
+ extdst0 shadow load interrupt
+ (display controller, content stream 0)
+ - description:
+ extdst0 frame complete interrupt
+ (display controller, content stream 0)
+ - description:
+ extdst0 sequence complete interrupt
+ (display controller, content stream 0)
+ - description:
+ extdst4 shadow load interrupt
+ (display controller, safety stream 0)
+ - description:
+ extdst4 frame complete interrupt
+ (display controller, safety stream 0)
+ - description:
+ extdst4 sequence complete interrupt
+ (display controller, safety stream 0)
+ - description:
+ extdst1 shadow load interrupt
+ (display controller, content stream 1)
+ - description:
+ extdst1 frame complete interrupt
+ (display controller, content stream 1)
+ - description:
+ extdst1 sequence complete interrupt
+ (display controller, content stream 1)
+ - description:
+ extdst5 shadow load interrupt
+ (display controller, safety stream 1)
+ - description:
+ extdst5 frame complete interrupt
+ (display controller, safety stream 1)
+ - description:
+ extdst5 sequence complete interrupt
+ (display controller, safety stream 1)
+ - description:
+ disengcfg0 shadow load interrupt
+ (display controller, display stream 0)
+ - description:
+ disengcfg0 frame complete interrupt
+ (display controller, display stream 0)
+ - description:
+ disengcfg0 sequence complete interrupt
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt0
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt1
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt2
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt3
+ (display controller, display stream 0)
+ - description:
+ signature0 shadow load interrupt
+ (display controller, display stream 0)
+ - description:
+ signature0 measurement valid interrupt
+ (display controller, display stream 0)
+ - description:
+ signature0 error condition interrupt
+ (display controller, display stream 0)
+ - description:
+ disengcfg1 shadow load interrupt
+ (display controller, display stream 1)
+ - description:
+ disengcfg1 frame complete interrupt
+ (display controller, display stream 1)
+ - description:
+ disengcfg1 sequence complete interrupt
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt0
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt1
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt2
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt3
+ (display controller, display stream 1)
+ - description:
+ signature1 shadow load interrupt
+ (display controller, display stream 1)
+ - description:
+ signature1 measurement valid interrupt
+ (display controller, display stream 1)
+ - description:
+ signature1 error condition interrupt
+ (display controller, display stream 1)
+ - description: reserved
+ - description:
+ command sequencer error condition interrupt(command sequencer)
+ - description:
+ common control software interrupt0(common control)
+ - description:
+ common control software interrupt1(common control)
+ - description:
+ common control software interrupt2(common control)
+ - description:
+ common control software interrupt3(common control)
+ - description:
+ framegen0 synchronization status activated interrupt
+ (display controller, safety stream 0)
+ - description:
+ framegen0 synchronization status deactivated interrupt
+ (display controller, safety stream 0)
+ - description:
+ framegen0 synchronization status activated interrupt
+ (display controller, content stream 0)
+ - description:
+ framegen0 synchronization status deactivated interrupt
+ (display controller, content stream 0)
+ - description:
+ framegen1 synchronization status activated interrupt
+ (display controller, safety stream 1)
+ - description:
+ framegen1 synchronization status deactivated interrupt
+ (display controller, safety stream 1)
+ - description:
+ framegen1 synchronization status activated interrupt
+ (display controller, content stream 1)
+ - description:
+ framegen1 synchronization status deactivated interrupt
+ (display controller, content stream 1)
+ minItems: 49
+
+ interrupt-names:
+ items:
+ - const: store9_shdload
+ - const: store9_framecomplete
+ - const: store9_seqcomplete
+ - const: extdst0_shdload
+ - const: extdst0_framecomplete
+ - const: extdst0_seqcomplete
+ - const: extdst4_shdload
+ - const: extdst4_framecomplete
+ - const: extdst4_seqcomplete
+ - const: extdst1_shdload
+ - const: extdst1_framecomplete
+ - const: extdst1_seqcomplete
+ - const: extdst5_shdload
+ - const: extdst5_framecomplete
+ - const: extdst5_seqcomplete
+ - const: disengcfg_shdload0
+ - const: disengcfg_framecomplete0
+ - const: disengcfg_seqcomplete0
+ - const: framegen0_int0
+ - const: framegen0_int1
+ - const: framegen0_int2
+ - const: framegen0_int3
+ - const: sig0_shdload
+ - const: sig0_valid
+ - const: sig0_error
+ - const: disengcfg_shdload1
+ - const: disengcfg_framecomplete1
+ - const: disengcfg_seqcomplete1
+ - const: framegen1_int0
+ - const: framegen1_int1
+ - const: framegen1_int2
+ - const: framegen1_int3
+ - const: sig1_shdload
+ - const: sig1_valid
+ - const: sig1_error
+ - const: reserved
+ - const: cmdseq_error
+ - const: comctrl_sw0
+ - const: comctrl_sw1
+ - const: comctrl_sw2
+ - const: comctrl_sw3
+ - const: framegen0_primsync_on
+ - const: framegen0_primsync_off
+ - const: framegen0_secsync_on
+ - const: framegen0_secsync_off
+ - const: framegen1_primsync_on
+ - const: framegen1_primsync_off
+ - const: framegen1_secsync_on
+ - const: framegen1_secsync_off
+ minItems: 49
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+
+ interrupt-controller@56180040 {
+ compatible = "fsl,imx8qxp-dc-intc";
+ reg = <0x56180040 0x60>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ interrupt-controller;
+ interrupt-parent = <&dc0_irqsteer>;
+ #interrupt-cells = <1>;
+ interrupts = <448>, <449>, <450>, <64>,
+ <65>, <66>, <67>, <68>,
+ <69>, <70>, <193>, <194>,
+ <195>, <196>, <197>, <72>,
+ <73>, <74>, <75>, <76>,
+ <77>, <78>, <79>, <80>,
+ <81>, <199>, <200>, <201>,
+ <202>, <203>, <204>, <205>,
+ <206>, <207>, <208>, <5>,
+ <0>, <1>, <2>, <3>,
+ <4>, <82>, <83>, <84>,
+ <85>, <209>, <210>, <211>,
+ <212>;
+ interrupt-names = "store9_shdload",
+ "store9_framecomplete",
+ "store9_seqcomplete",
+ "extdst0_shdload",
+ "extdst0_framecomplete",
+ "extdst0_seqcomplete",
+ "extdst4_shdload",
+ "extdst4_framecomplete",
+ "extdst4_seqcomplete",
+ "extdst1_shdload",
+ "extdst1_framecomplete",
+ "extdst1_seqcomplete",
+ "extdst5_shdload",
+ "extdst5_framecomplete",
+ "extdst5_seqcomplete",
+ "disengcfg_shdload0",
+ "disengcfg_framecomplete0",
+ "disengcfg_seqcomplete0",
+ "framegen0_int0",
+ "framegen0_int1",
+ "framegen0_int2",
+ "framegen0_int3",
+ "sig0_shdload",
+ "sig0_valid",
+ "sig0_error",
+ "disengcfg_shdload1",
+ "disengcfg_framecomplete1",
+ "disengcfg_seqcomplete1",
+ "framegen1_int0",
+ "framegen1_int1",
+ "framegen1_int2",
+ "framegen1_int3",
+ "sig1_shdload",
+ "sig1_valid",
+ "sig1_error",
+ "reserved",
+ "cmdseq_error",
+ "comctrl_sw0",
+ "comctrl_sw1",
+ "comctrl_sw2",
+ "comctrl_sw3",
+ "framegen0_primsync_on",
+ "framegen0_primsync_off",
+ "framegen0_secsync_on",
+ "framegen0_secsync_off",
+ "framegen1_primsync_on",
+ "framegen1_primsync_off",
+ "framegen1_secsync_on",
+ "framegen1_secsync_off";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mpic-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MSI interrupt controller
+
+description: |
+ The Freescale hypervisor and msi-address-64
+ -------------------------------------------
+
+ Normally, PCI devices have access to all of CCSR via an ATMU mapping. The
+ Freescale MSI driver calculates the address of MSIIR (in the MSI register
+ block) and sets that address as the MSI message address.
+
+ In a virtualized environment, the hypervisor may need to create an IOMMU
+ mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement
+ because of hardware limitations of the Peripheral Access Management Unit
+ (PAMU), which is currently the only IOMMU that the hypervisor supports.
+ The ATMU is programmed with the guest physical address, and the PAMU
+ intercepts transactions and reroutes them to the true physical address.
+
+ In the PAMU, each PCI controller is given only one primary window. The
+ PAMU restricts DMA operations so that they can only occur within a window.
+ Because PCI devices must be able to DMA to memory, the primary window must
+ be used to cover all of the guest's memory space.
+
+ PAMU primary windows can be divided into 256 subwindows, and each
+ subwindow can have its own address mapping ("guest physical" to "true
+ physical"). However, each subwindow has to have the same alignment, which
+ means they cannot be located at just any address. Because of these
+ restrictions, it is usually impossible to create a 4KB subwindow that
+ covers MSIIR where it's normally located.
+
+ Therefore, the hypervisor has to create a subwindow inside the same
+ primary window used for memory, but mapped to the MSIR block (where MSIIR
+ lives). The first subwindow after the end of guest memory is used for
+ this. The address specified in the msi-address-64 property is the PCI
+ address of MSIIR. The hypervisor configures the PAMU to map that address to
+ the true physical address of MSIIR.
+
+maintainers:
+ - J. Neuschäfer <j.ne@posteo.net>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,mpic-msi
+ - fsl,mpic-msi-v4.3
+ - fsl,ipic-msi
+ - fsl,vmpic-msi
+ - fsl,vmpic-msi-v4.3
+ - items:
+ - enum:
+ - fsl,mpc8572-msi
+ - fsl,mpc8610-msi
+ - fsl,mpc8641-msi
+ - const: fsl,mpic-msi
+
+ reg:
+ minItems: 1
+ items:
+ - description: Address and length of the shared message interrupt
+ register set
+ - description: Address of aliased MSIIR or MSIIR1 register for platforms
+ that have such an alias. If using MSIIR1, the second region must be
+ added because different MSI group has different MSIIR1 offset.
+
+ interrupts:
+ minItems: 1
+ maxItems: 16
+ description:
+ Each one of the interrupts here is one entry per 32 MSIs, and routed to
+ the host interrupt controller. The interrupts should be set as edge
+ sensitive. If msi-available-ranges is present, only the interrupts that
+ correspond to available ranges shall be present.
+
+ msi-available-ranges:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: First MSI interrupt in this range
+ - description: Number of MSI interrupts in this range
+ description:
+ Define which MSI interrupt can be used in the 256 MSI interrupts.
+ If not specified, all the MSI interrupts can be used.
+ Each available range must begin and end on a multiple of 32 (i.e. no
+ splitting an individual MSI register or the associated PIC interrupt).
+
+ msi-address-64:
+ $ref: /schemas/types.yaml#/definitions/uint64
+ description:
+ 64-bit PCI address of the MSIIR register. The MSIIR register is used for
+ MSI messaging. The address of MSIIR in PCI address space is the MSI
+ message address.
+
+ This property may be used in virtualized environments where the hypervisor
+ has created an alternate mapping for the MSIR block. See the top-level
+ description for an explanation.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,mpic-msi-v4.3
+ - fsl,vmpic-msi-v4.3
+ then:
+ properties:
+ interrupts:
+ minItems: 16
+ description:
+ Version 4.3 implies that there are 16 shared interrupts, and they
+ are configured through MSIIR1.
+
+ # MPIC v4.3 does not support this property because the 32 interrupts of
+ # an individual register are not continuous when using MSIIR1.
+ msi-available-ranges: false
+
+ reg:
+ minItems: 2
+
+ else:
+ properties:
+ interrupts:
+ maxItems: 8
+ description:
+ In versions before 4.3, only 8 shared interrupts are available, and
+ they are configured through MSIIR.
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ msi@41600 {
+ compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <0xe0 0>, <0xe1 0>, <0xe2 0>, <0xe3 0>,
+ <0xe4 0>, <0xe5 0>, <0xe6 0>, <0xe7 0>;
+ };
+
+ - |
+ msi@41600 {
+ compatible = "fsl,mpic-msi-v4.3";
+ reg = <0x41600 0x200>, <0x44148 4>;
+ interrupts = <0xe0 0 0 0>, <0xe1 0 0 0>, <0xe2 0 0 0>, <0xe3 0 0 0>,
+ <0xe4 0 0 0>, <0xe5 0 0 0>, <0xe6 0 0 0>, <0xe7 0 0 0>,
+ <0x100 0 0 0>, <0x101 0 0 0>, <0x102 0 0 0>, <0x103 0 0 0>,
+ <0x104 0 0 0>, <0x105 0 0 0>, <0x106 0 0 0>, <0x107 0 0 0>;
+ };
+
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,vf610-mscm-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+description:
+ The MSCM IP contains multiple sub modules, this binding describes the second
+ block of registers which control the interrupt router. The interrupt router
+ allows to configure the recipient of each peripheral interrupt. Furthermore
+ it controls the directed processor interrupts. The module is available in all
+ Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+ which comes with a Cortex-A5/Cortex-M4 combination).
+
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,vf610-mscm-ir
+
+ reg:
+ maxItems: 1
+
+ fsl,cpucfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The handle to the MSCM CPU configuration node, required
+ to get the current CPU ID
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ Two cells, interrupt number and cells.
+ The hardware interrupt number according to interrupt
+ assignment of the interrupt router is required.
+ Flags get passed only when using GIC as parent. Flags
+ encoding as documented by the GIC bindings.
+
+required:
+ - compatible
+ - reg
+ - fsl,cpucfg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@40001800 {
+ compatible = "fsl,vf610-mscm-ir";
+ reg = <0x40001800 0x400>;
+ fsl,cpucfg = <&mscm_cpucfg>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ };
- enum:
- mediatek,mt2701-sysirq
- mediatek,mt2712-sysirq
+ - mediatek,mt6572-sysirq
- mediatek,mt6580-sysirq
- mediatek,mt6582-sysirq
- mediatek,mt6589-sysirq
oneOf:
- items:
- enum:
+ - andestech,qilai-plic
- renesas,r9a07g043-plic
- const: andestech,nceplic100
- items:
$id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-sswi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: T-HEAD C900 ACLINT Supervisor-level Software Interrupt Device
+title: ACLINT Supervisor-level Software Interrupt Device
maintainers:
- Inochi Amaoto <inochiama@outlook.com>
description:
- The SSWI device is a part of the THEAD ACLINT device. It provides
- supervisor-level IPI functionality for a set of HARTs on a THEAD
- platform. It provides a register to set an IPI (SETSSIP) for each
- HART connected to the SSWI device.
+ The SSWI device is a part of the ACLINT device. It provides
+ supervisor-level IPI functionality for a set of HARTs on a supported
+ platforms. It provides a register to set an IPI (SETSSIP) for each
+ HART connected to the SSWI device. See draft specification
+ https://github.com/riscvarchive/riscv-aclint
+
+ Following variants of the SSWI ACLINT supported, using dedicated
+ compatible string
+ - THEAD C900
+ - MIPS P8700
properties:
compatible:
- items:
- - enum:
- - sophgo,sg2044-aclint-sswi
- - const: thead,c900-aclint-sswi
+ oneOf:
+ - items:
+ - enum:
+ - sophgo,sg2044-aclint-sswi
+ - const: thead,c900-aclint-sswi
+ - items:
+ - const: mips,p8700-aclint-sswi
reg:
maxItems: 1
minItems: 1
maxItems: 4095
+ riscv,hart-indexes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4095
+ description:
+ A list of hart indexes that APLIC should use to address each hart
+ that is mentioned in the "interrupts-extended"
+
additionalProperties: false
required:
- interrupt-controller
- interrupts-extended
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mips,p8700-aclint-sswi
+ then:
+ required:
+ - riscv,hart-indexes
+ else:
+ properties:
+ riscv,hart-indexes: false
+
examples:
- |
+ //Example 1
interrupt-controller@94000000 {
compatible = "sophgo,sg2044-aclint-sswi", "thead,c900-aclint-sswi";
reg = <0x94000000 0x00004000>;
<&cpu3intc 1>,
<&cpu4intc 1>;
};
+
+ - |
+ //Example 2
+ interrupt-controller@94000000 {
+ compatible = "mips,p8700-aclint-sswi";
+ reg = <0x94000000 0x00004000>;
+ #interrupt-cells = <0>;
+ interrupt-controller;
+ interrupts-extended = <&cpu1intc 1>,
+ <&cpu2intc 1>,
+ <&cpu3intc 1>,
+ <&cpu4intc 1>;
+ riscv,hart-indexes = <0x0 0x1 0x10 0x11>;
+ };
+
...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/xlnx,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Interrupt Controller
+
+maintainers:
+ - Michal Simek <michal.simek@amd.com>
+
+description:
+ The controller is a soft IP core that is configured at build time for the
+ number of interrupts and the type of each interrupt. These details cannot
+ be changed at run time.
+
+properties:
+ compatible:
+ const: xlnx,xps-intc-1.00.a
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ Specifies the number of cells needed to encode an interrupt source.
+ The value shall be a minimum of 1. The Xilinx device trees typically
+ use 2 but the 2nd value is not used.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+ description:
+ Specifies the interrupt of the parent controller from which it is chained.
+
+ xlnx,kind-of-intr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ A 32 bit value specifying the interrupt type for each possible interrupt
+ (1 = edge, 0 = level). The interrupt type typically comes in thru
+ the device tree node of the interrupt generating device, but in this case
+ the interrupt type is determined by the interrupt controller based on how
+ it was implemented.
+
+ xlnx,num-intr-inputs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ description:
+ Specifies the number of interrupts supported by the specific
+ implementation of the controller.
+
+required:
+ - reg
+ - "#interrupt-cells"
+ - interrupt-controller
+ - xlnx,kind-of-intr
+ - xlnx,num-intr-inputs
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@41800000 {
+ compatible = "xlnx,xps-intc-1.00.a";
+ reg = <0x41800000 0x10000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ xlnx,kind-of-intr = <0x1>;
+ xlnx,num-intr-inputs = <1>;
+ };
- description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
items:
- enum:
+ - qcom,milos-smmu-500
- qcom,qcm2290-smmu-500
- qcom,qcs615-smmu-500
- qcom,qcs8300-smmu-500
- description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
items:
- enum:
+ - qcom,milos-smmu-500
- qcom,qcm2290-smmu-500
- qcom,qcs615-smmu-500
- qcom,qcs8300-smmu-500
- qcom,sm7150-smmu-v2
- const: qcom,adreno-smmu
- const: qcom,smmu-v2
- - description: Qcom Adreno GPUs on Google Cheza platform
- items:
- - const: qcom,sdm845-smmu-v2
- - const: qcom,smmu-v2
- description: Marvell SoCs implementing "arm,mmu-500"
items:
- const: marvell,ap806-smmu-500
compatible:
items:
- enum:
+ - qcom,milos-smmu-500
- qcom,sar2130p-smmu-500
- qcom,sm8550-smmu-500
- qcom,sm8650-smmu-500
/* The IOMMU programming interface uses slot 00:01.0 */
iommu0: iommu@1,0 {
- compatible = "pci1efd,edf1", "riscv,pci-iommu";
- reg = <0x800 0 0 0 0>;
- #iommu-cells = <1>;
+ compatible = "pci1efd,edf1", "riscv,pci-iommu";
+ reg = <0x800 0 0 0 0>;
+ #iommu-cells = <1>;
};
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmb-dev.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Intelligent Platform Management Bus(IPMB) Device
+
+description: |
+ The IPMB is an I2C bus which provides interconnection between a Baseboard
+ Management Controller(BMC) and chassis electronics. The BMC sends IPMI
+ requests to intelligent controllers like Satellite Management Controller(MC)
+ devices via IPMB and the device sends responses back to the BMC.
+ This device uses an I2C slave device to send and receive IPMB messages,
+ either on a BMC or other MC. A miscellaneous device provices a user space
+ program to communicate with the kernel and the backend device. Some IPMB
+ devices only support the I2C protocol and not the SMB protocol.
+
+ IPMB communications protocol Specification V1.0
+ https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmp-spec-v1.0.pdf
+
+maintainers:
+ - Ninad Palsule <ninad@linux.ibm.com>
+
+properties:
+ compatible:
+ enum:
+ - ipmb-dev
+
+ reg:
+ maxItems: 1
+
+ i2c-protocol:
+ description:
+ Use I2C block transfer instead of SMBUS block transfer.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/i2c/i2c.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ipmb-dev@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+ };
properties:
reg:
- maxItems: 1
+ items:
+ - minimum: 0
+ maximum: 2
+
+ description:
+ This property denotes the index within the LED bank.
required:
- reg
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STANDBY;
- led@3 {
- reg = <0x3>;
+ led@0 {
+ reg = <0x0>;
color = <LED_COLOR_ID_RED>;
};
- led@4 {
- reg = <0x4>;
+ led@1 {
+ reg = <0x1>;
color = <LED_COLOR_ID_GREEN>;
};
- led@5 {
- reg = <0x5>;
+ led@2 {
+ reg = <0x2>;
color = <LED_COLOR_ID_BLUE>;
};
};
examples:
- |
- #include <dt-bindings/leds/common.h>
- led-controller {
- compatible = "mediatek,mt6360-led";
- #address-cells = <1>;
- #size-cells = <0>;
-
- multi-led@0 {
- reg = <0>;
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_RGB>;
- led-max-microamp = <24000>;
- #address-cells = <1>;
- #size-cells = <0>;
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_GREEN>;
- };
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_BLUE>;
- };
- };
- led@3 {
- reg = <3>;
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_WHITE>;
- led-max-microamp = <150000>;
- };
- led@4 {
- reg = <4>;
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- function-enumerator = <1>;
- led-max-microamp = <200000>;
- flash-max-microamp = <500000>;
- flash-max-timeout-us = <1024000>;
- };
- led@5 {
- reg = <5>;
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- function-enumerator = <2>;
- led-max-microamp = <200000>;
- flash-max-microamp = <500000>;
- flash-max-timeout-us = <1024000>;
- };
- };
+ #include <dt-bindings/leds/common.h>
+ led-controller {
+ compatible = "mediatek,mt6360-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RGB>;
+ led-max-microamp = <24000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <150000>;
+ };
+ led@4 {
+ reg = <4>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ led@5 {
+ reg = <5>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <2>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ };
- |
-
- led-controller {
- compatible = "mediatek,mt6360-led";
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_RED>;
- led-max-microamp = <24000>;
- };
- led@1 {
- reg = <1>;
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_GREEN>;
- led-max-microamp = <24000>;
- };
- led@2 {
- reg = <2>;
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_BLUE>;
- led-max-microamp = <24000>;
- };
- led@3 {
- reg = <3>;
- function = LED_FUNCTION_INDICATOR;
- color = <LED_COLOR_ID_WHITE>;
- led-max-microamp = <150000>;
- };
- led@4 {
- reg = <4>;
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- function-enumerator = <1>;
- led-max-microamp = <200000>;
- flash-max-microamp = <500000>;
- flash-max-timeout-us = <1024000>;
- };
- led@5 {
- reg = <5>;
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- function-enumerator = <2>;
- led-max-microamp = <200000>;
- flash-max-microamp = <500000>;
- flash-max-timeout-us = <1024000>;
- };
- };
+ led-controller {
+ compatible = "mediatek,mt6360-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ led-max-microamp = <24000>;
+ };
+ led@1 {
+ reg = <1>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ led-max-microamp = <24000>;
+ };
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ led-max-microamp = <24000>;
+ };
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <150000>;
+ };
+ led@4 {
+ reg = <4>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ led@5 {
+ reg = <5>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <2>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ };
...
- onnn,ncp5623
reg:
- const: 0x38
+ enum:
+ - 0x38
+ - 0x39
multi-led:
type: object
#include <dt-bindings/reset/sun8i-h3-ccu.h>
msgbox: mailbox@1c17000 {
- compatible = "allwinner,sun8i-h3-msgbox",
- "allwinner,sun6i-a31-msgbox";
- reg = <0x01c17000 0x1000>;
- clocks = <&ccu CLK_BUS_MSGBOX>;
- resets = <&ccu RST_BUS_MSGBOX>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <1>;
+ compatible = "allwinner,sun8i-h3-msgbox",
+ "allwinner,sun6i-a31-msgbox";
+ reg = <0x01c17000 0x1000>;
+ clocks = <&ccu CLK_BUS_MSGBOX>;
+ resets = <&ccu RST_BUS_MSGBOX>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
};
...
maxItems: 1
interrupts:
- minItems: 3
+ maxItems: 3
description:
Contains the interrupt information corresponding to each of the 3 links
of MHU.
examples:
- |
mailbox@c883c404 {
- compatible = "amlogic,meson-gxbb-mhu";
- reg = <0xc883c404 0x4c>;
- interrupts = <208>, <209>, <210>;
- #mbox-cells = <1>;
+ compatible = "amlogic,meson-gxbb-mhu";
+ reg = <0xc883c404 0x4c>;
+ interrupts = <208>, <209>, <210>;
+ #mbox-cells = <1>;
};
examples:
- |
- mailbox@77408000 {
- compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
- reg = <0x77408000 0x4000>;
- interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
- interrupt-names = "send-empty", "send-not-empty",
- "recv-empty", "recv-not-empty";
- #mbox-cells = <0>;
- };
+ mailbox@77408000 {
+ compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x77408000 0x4000>;
+ interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/aspeed,ast2700-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2700 mailbox controller
+
+maintainers:
+ - Jammy Huang <jammy_huang@aspeedtech.com>
+
+description: >
+ ASPEED AST2700 has multiple processors that need to communicate with each
+ other. The mailbox controller provides a way for these processors to send
+ messages to each other. It is a hardware-based inter-processor communication
+ mechanism that allows processors to send and receive messages through
+ dedicated channels.
+
+ The mailbox's tx/rx are independent, meaning that one processor can send a
+ message while another processor is receiving a message simultaneously.
+ There are 4 channels available for both tx and rx operations. Each channel
+ has a FIFO buffer that can hold messages of a fixed size (32 bytes in this
+ case).
+
+ The mailbox controller also supports interrupt generation, allowing
+ processors to notify each other when a message is available or when an event
+ occurs.
+
+properties:
+ compatible:
+ const: aspeed,ast2700-mailbox
+
+ reg:
+ items:
+ - description: TX control register
+ - description: RX control register
+
+ reg-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ maxItems: 1
+
+ "#mbox-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mailbox@12c1c200 {
+ compatible = "aspeed,ast2700-mailbox";
+ reg = <0x12c1c200 0x100>, <0x12c1c300 0x100>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,bcm74110-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM74110 Mailbox
+
+maintainers:
+ - Justin Chen <justin.chen@broadcom.com>
+ - Florian Fainelli <florian.fainelli@broadcom.com>
+
+description: Broadcom mailbox hardware first introduced with 74110
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm74110-mbox
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: RX doorbell and watermark interrupts
+ - description: TX doorbell and watermark interrupts
+
+ "#mbox-cells":
+ const: 2
+ description:
+ The first cell is channel type and second cell is shared memory slot
+
+ brcm,rx:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: RX Mailbox number
+
+ brcm,tx:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: TX Mailbox number
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#mbox-cells"
+ - brcm,rx
+ - brcm,tx
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mailbox@a552000 {
+ compatible = "brcm,bcm74110-mbox";
+ reg = <0xa552000 0x1104>;
+ interrupts = <GIC_SPI 0x67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0x66 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <0x2>;
+ brcm,rx = <0x7>;
+ brcm,tx = <0x6>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/cix,sky1-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cixtech mailbox controller
+
+maintainers:
+ - Guomin Chen <Guomin.Chen@cixtech.com>
+
+description:
+ The Cixtech mailbox controller, used in the Cixtech Sky1 SoC,
+ is used for message transmission between multiple processors
+ within the SoC, such as the AP, PM, audio DSP, SensorHub MCU,
+ and others
+
+ Each Cixtech mailbox controller is unidirectional, so they are
+ typically used in pairs-one for receiving and one for transmitting.
+
+ Each Cixtech mailbox supports 11 channels with different transmission modes
+ channel 0-7 - Fast channel with 32bit transmit register and IRQ support
+ channel 8 - Doorbell mode,using the mailbox as an interrupt-generating
+ mechanism.
+ channel 9 - Fifo based channel with 32*32bit depth fifo and IRQ support
+ channel 10 - Reg based channel with 32*32bit transmit register and
+ Doorbell+transmit acknowledgment IRQ support
+
+ In the CIX Sky1 SoC use case, there are 4 pairs of mailbox controllers
+ AP <--> PM - using Doorbell transfer mode
+ AP <--> SE - using REG transfer mode
+ AP <--> DSP - using FIFO transfer mode
+ AP <--> SensorHub - using FIFO transfer mode
+
+properties:
+ compatible:
+ const: cix,sky1-mbox
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#mbox-cells":
+ const: 1
+
+ cix,mbox-dir:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Direction of the mailbox relative to the AP
+ enum: [tx, rx]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#mbox-cells"
+ - cix,mbox-dir
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mbox_ap2pm: mailbox@30000000 {
+ compatible = "cix,sky1-mbox";
+ reg = <0 0x30000000 0 0x10000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <1>;
+ cix,mbox-dir = "tx";
+ };
+ };
<dt-bindings/mailbox/tegra186-hsp.h>
properties:
- $nodename:
- pattern: "^hsp@[0-9a-f]+$"
-
compatible:
oneOf:
- - const: nvidia,tegra186-hsp
- - const: nvidia,tegra194-hsp
- - const: nvidia,tegra264-hsp
+ - enum:
+ - nvidia,tegra186-hsp
+ - nvidia,tegra194-hsp
+ - nvidia,tegra264-hsp
- items:
- const: nvidia,tegra234-hsp
- const: nvidia,tegra194-hsp
interrupts:
minItems: 1
- maxItems: 9
+ maxItems: 17
interrupt-names:
oneOf:
- items:
- const: doorbell
+ - items:
+ - const: doorbell
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+ - pattern: "^shared([0-9]|1[0-5])$"
+
- items:
- const: doorbell
- pattern: "^shared[0-7]$"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
- hsp_top0: hsp@3c00000 {
+ mailbox@3c00000 {
compatible = "nvidia,tegra186-hsp";
reg = <0x03c00000 0xa0000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "doorbell";
#mbox-cells = <2>;
};
-
- client {
- mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_CCPLEX>;
- };
# Example apcs with msm8996
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- apcs_glb: mailbox@9820000 {
+ mailbox@9820000 {
compatible = "qcom,msm8996-apcs-hmss-global";
reg = <0x9820000 0x1000>;
#clock-cells = <0>;
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
- };
-
# Example apcs with qcs404
- |
#define GCC_APSS_AHB_CLK_SRC 1
compatible:
items:
- enum:
+ - qcom,milos-ipcc
- qcom,qcs8300-ipcc
- qcom,qdu1000-ipcc
- qcom,sa8255p-ipcc
- |
/* OMAP4 */
#include <dt-bindings/interrupt-controller/arm-gic.h>
- mailbox: mailbox@4a0f4000 {
+ mailbox@4a0f4000 {
compatible = "ti,omap4-mailbox";
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
};
};
- dsp {
- mboxes = <&mailbox &mbox_dsp>;
- };
-
- |
/* AM33xx */
- mailbox1: mailbox@480c8000 {
+ mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480c8000 0x200>;
interrupts = <77>;
- |
/* AM65x */
- mailbox0_cluster0: mailbox@31f80000 {
+ mailbox@31f80000 {
compatible = "ti,am654-mailbox";
reg = <0x31f80000 0x200>;
#mbox-cells = <1>;
- const: scfg
reg:
- minItems: 3
+ maxItems: 3
interrupt-names:
minItems: 1
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
secure_proxy: mailbox@32c00000 {
- compatible = "ti,am654-secure-proxy";
- #mbox-cells = <1>;
- reg-names = "target_data", "rt", "scfg";
- reg = <0x32c00000 0x100000>,
- <0x32400000 0x100000>,
- <0x32800000 0x100000>;
- interrupt-names = "rx_011";
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x32c00000 0x100000>,
+ <0x32400000 0x100000>,
+ <0x32800000 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
reg:
maxItems: 1
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: error_irq
+ - const: irq
+
clocks:
items:
- description: CSI2Rx system clock
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6q-vdoa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Video Data Order Adapter
+
+description:
+ The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
+ is to reorder video data from the macroblock tiled order produced by the CODA
+ 960 VPU to the conventional raster-scan order for scanout.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: "fsl,imx6q-vdoa"
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+
+ vdoa@21e4000 {
+ compatible = "fsl,imx6q-vdoa";
+ reg = <0x021e4000 0x4000>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_VDOA>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qm-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QM Image Sensing Interface
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ The Image Sensing Interface (ISI) combines image processing pipelines with
+ DMA engines to process and capture frames originating from a variety of
+ sources. The inputs to the ISI go through Pixel Link interfaces, and their
+ number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+ CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-isi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: per0
+ - const: per1
+ - const: per2
+ - const: per3
+ - const: per4
+ - const: per5
+ - const: per6
+ - const: per7
+
+ interrupts:
+ maxItems: 8
+
+ power-domains:
+ maxItems: 8
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI CSI-2 RX 0
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI CSI-2 RX 1
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: HDMI RX
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ image-controller@58100000 {
+ compatible = "fsl,imx8qm-isi";
+ reg = <0x58100000 0x80000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>,
+ <&pdma6_lpcg IMX_LPCG_CLK_0>,
+ <&pdma7_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per1", "per2", "per3",
+ "per4", "per5", "per6", "per7";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>,
+ <&pd IMX_SC_R_ISI_CH6>, <&pd IMX_SC_R_ISI_CH7>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+ };
+...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qxp-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP Image Sensing Interface
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ The Image Sensing Interface (ISI) combines image processing pipelines with
+ DMA engines to process and capture frames originating from a variety of
+ sources. The inputs to the ISI go through Pixel Link interfaces, and their
+ number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+ CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-isi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 6
+
+ clock-names:
+ items:
+ - const: per0
+ - const: per1
+ - const: per2
+ - const: per3
+ - const: per4
+ - const: per5
+
+ interrupts:
+ maxItems: 6
+
+ power-domains:
+ maxItems: 6
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI CSI-2 RX 0
+ port@6:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CSI-2 Parallel RX
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ image-controller@58100000 {
+ compatible = "fsl,imx8qxp-isi";
+ reg = <0x58100000 0x60000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+ };
+...
+++ /dev/null
-Freescale Video Data Order Adapter
-==================================
-
-The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
-is to reorder video data from the macroblock tiled order produced by the CODA
-960 VPU to the conventional raster-scan order for scanout.
-
-Required properties:
-- compatible: must be "fsl,imx6q-vdoa"
-- reg: the register base and size for the device registers
-- interrupts: the VDOA interrupt
-- clocks: the vdoa clock
-
-Example:
-
-vdoa@21e4000 {
- compatible = "fsl,imx6q-vdoa";
- reg = <0x021e4000 0x4000>;
- interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_VDOA>;
-};
More detailed documentation can be found in
Documentation/devicetree/bindings/media/video-interfaces.txt .
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
properties:
compatible:
oneOf:
documentation.
maxItems: 1
- flash-leds:
- description: Flash LED phandles. See ../video-interfaces.txt for details.
-
- lens-focus:
- description: Lens focus controller phandles. See ../video-interfaces.txt
- for details.
+ flash-leds: true
+ lens-focus: true
rotation:
- description: Rotation of the sensor. See ../video-interfaces.txt for
- details.
enum: [ 0, 180 ]
port:
- bus-type
- link-frequencies
+ slew-rate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Slew rate ot the output pads DOUT[7:0], LINE_VALID, FRAME_VALID and
+ PIXCLK. Higher values imply steeper voltage-flanks on the pads.
+ minimum: 0
+ maximum: 7
+ default: 7
+
required:
- compatible
- reg
controlled through an I2C-compatible SCCB bus. The sensor transmits images
on a MIPI CSI-2 output interface with up to 4 data lanes.
+$ref: /schemas/media/video-interface-devices.yaml#
+
properties:
compatible:
const: ovti,ov8858
- clocks
- port
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
clock-frequency:
description: Frequency of the xclk clock in Hz.
+ deprecated: true
enable-gpios:
description: GPIO descriptor for the enable pin.
maxItems: 1
- vdddo-supply:
- description: Chip digital IO regulator (1.8V).
-
vdda-supply:
description: Chip analog regulator (2.7V).
vddd-supply:
description: Chip digital core regulator (1.12V).
+ vdddo-supply:
+ description: Chip digital IO regulator (1.8V).
+
flash-leds: true
lens-focus: true
- compatible
- reg
- clocks
- - clock-frequency
- enable-gpios
- - vdddo-supply
- vdda-supply
- vddd-supply
+ - vdddo-supply
- port
unevaluatedProperties: false
camera-sensor@1a {
compatible = "sony,imx214";
reg = <0x1a>;
- vdddo-supply = <&pm8994_lvs1>;
- vddd-supply = <&camera_vddd_1v12>;
+
+ clocks = <&camera_clk>;
+ assigned-clocks = <&camera_clk>;
+ assigned-clock-rates = <24000000>;
+
+ enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
vdda-supply = <&pm8994_l17>;
+ vddd-supply = <&camera_vddd_1v12>;
+ vdddo-supply = <&pm8994_lvs1>;
+
lens-focus = <&ad5820>;
- enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
- clocks = <&camera_clk>;
- clock-frequency = <24000000>;
port {
imx214_ep: endpoint {
data-lanes = <1 2 3 4>;
- link-frequencies = /bits/ 64 <480000000>;
+ link-frequencies = /bits/ 64 <600000000>;
remote-endpoint = <&csiphy0_ep>;
};
};
};
};
-
-...
The camera module does not expose the model through registers, so the
exact model needs to be specified.
+$ref: /schemas/media/video-interface-devices.yaml#
+
properties:
compatible:
enum:
- reg
- port
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
- nxp,imx8qxp-jpgdec
- nxp,imx8qxp-jpgenc
- items:
- - const: nxp,imx8qm-jpgdec
+ - enum:
+ - nxp,imx8qm-jpgdec
+ - nxp,imx95-jpgdec
- const: nxp,imx8qxp-jpgdec
- items:
- - const: nxp,imx8qm-jpgenc
+ - enum:
+ - nxp,imx8qm-jpgenc
+ - nxp,imx95-jpgenc
- const: nxp,imx8qxp-jpgenc
reg:
description:
List of phandle and PM domain specifier as documented in
Documentation/devicetree/bindings/power/power_domain.txt
- minItems: 2 # Wrapper and 1 slot
+ minItems: 1 # Wrapper and all slots
maxItems: 5 # Wrapper and 4 slots
required:
- interrupts
- power-domains
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,imx95-jpgenc
+ - nxp,imx95-jpgdec
+ then:
+ properties:
+ power-domains:
+ maxItems: 1
+ else:
+ properties:
+ power-domains:
+ minItems: 2 # Wrapper and 1 slot
+
+
additionalProperties: false
examples:
properties:
compatible:
- enum:
- - fsl,imx8mq-mipi-csi2
+ oneOf:
+ - enum:
+ - fsl,imx8mq-mipi-csi2
+ - fsl,imx8qxp-mipi-csi2
+ - items:
+ - const: fsl,imx8qm-mipi-csi2
+ - const: fsl,imx8qxp-mipi-csi2
reg:
- maxItems: 1
+ items:
+ - description: MIPI CSI-2 RX host controller register.
+ - description: MIPI CSI-2 control and status register (csr).
+ minItems: 1
clocks:
items:
- description: CORE_RESET reset register bit definition
- description: PHY_REF_RESET reset register bit definition
- description: ESC_RESET reset register bit definition
+ minItems: 1
fsl,mipi-phy-gpr:
description: |
- clock-names
- power-domains
- resets
- - fsl,mipi-phy-gpr
- ports
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qxp-mipi-csi2
+ then:
+ properties:
+ reg:
+ minItems: 2
+ resets:
+ maxItems: 1
+ else:
+ properties:
+ reg:
+ maxItems: 1
+ resets:
+ minItems: 3
+ required:
+ - fsl,mipi-phy-gpr
+
additionalProperties: false
examples:
CSI input ports.
patternProperties:
- "^port@[0-3]+$":
+ "^port@[0-3]$":
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
unevaluatedProperties: false
properties:
- clock-lanes:
- maxItems: 1
-
data-lanes:
minItems: 1
maxItems: 4
+ bus-type:
+ enum:
+ - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+ - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
required:
- - clock-lanes
- data-lanes
required:
#address-cells = <2>;
#size-cells = <2>;
- camss: isp@acb6000 {
+ camss: isp@acb7000 {
compatible = "qcom,x1e80100-camss";
reg = <0 0x0acb7000 0 0x2000>,
port@0 {
reg = <0>;
csiphy_ep0: endpoint {
- clock-lanes = <7>;
data-lanes = <0 1>;
remote-endpoint = <&sensor_ep>;
};
- renesas,r9a07g043u-fcpvd # RZ/G2UL
- renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
- renesas,r9a07g054-fcpvd # RZ/V2L
+ - renesas,r9a09g056-fcpvd # RZ/V2N
- renesas,r9a09g057-fcpvd # RZ/V2H(P)
- const: renesas,fcpv # Generic FCP for VSP fallback
- enum:
- renesas,r9a07g043u-vsp2 # RZ/G2UL
- renesas,r9a07g054-vsp2 # RZ/V2L
+ - renesas,r9a09g056-vsp2 # RZ/V2N
- renesas,r9a09g057-vsp2 # RZ/V2H(P)
- const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
- Heiko Stuebner <heiko@sntech.de>
description: |-
- The Rockchip rk3399 has a stateless Video Decoder that can decodes H.264,
- HEVC an VP9 streams.
+ Rockchip SoCs have variants of the same stateless Video Decoder that can
+ decodes H.264, HEVC, VP9 and AV1 streams, depending on the variant.
properties:
compatible:
oneOf:
- const: rockchip,rk3399-vdec
+ - const: rockchip,rk3576-vdec
+ - const: rockchip,rk3588-vdec
- items:
- enum:
- rockchip,rk3228-vdec
- const: rockchip,rk3399-vdec
reg:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: The function configuration registers base
+ - description: The link table configuration registers base
+ - description: The cache configuration registers base
+
+ reg-names:
+ items:
+ - const: function
+ - const: link
+ - const: cache
interrupts:
maxItems: 1
clocks:
+ minItems: 4
items:
- description: The Video Decoder AXI interface clock
- description: The Video Decoder AHB interface clock
- description: The Video Decoded CABAC clock
- description: The Video Decoder core clock
+ - description: The Video decoder HEVC CABAC clock
clock-names:
+ minItems: 4
items:
- const: axi
- const: ahb
- const: cabac
- const: core
+ - const: hevc_cabac
assigned-clocks: true
assigned-clock-rates: true
+ resets:
+ items:
+ - description: The Video Decoder AXI interface reset
+ - description: The Video Decoder AHB interface reset
+ - description: The Video Decoded CABAC reset
+ - description: The Video Decoder core reset
+ - description: The Video decoder HEVC CABAC reset
+
+ reset-names:
+ items:
+ - const: axi
+ - const: ahb
+ - const: cabac
+ - const: core
+ - const: hevc_cabac
+
power-domains:
maxItems: 1
iommus:
maxItems: 1
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to a reserved on-chip SRAM regions.
+ Some SoCs, like rk3588 provide on-chip SRAM to store temporary
+ buffers during decoding.
+
required:
- compatible
- reg
- clock-names
- power-domains
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3576-vdec
+ - rockchip,rk3588-vdec
+ then:
+ properties:
+ reg:
+ minItems: 3
+ reg-names:
+ minItems: 3
+ clocks:
+ minItems: 5
+ clock-names:
+ minItems: 5
+ resets:
+ minItems: 5
+ reset-names:
+ minItems: 5
+ else:
+ properties:
+ reg:
+ maxItems: 1
+ reg-names: false
+ clocks:
+ maxItems: 4
+ clock-names:
+ maxItems: 4
+ resets: false
+ reset-names: false
+ sram: false
+
additionalProperties: false
examples:
+++ /dev/null
-* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller
-
-Required properties:
-
-- compatible: Must be "arm,primecell" and exactly one from
- "arm,pl172", "arm,pl175" or "arm,pl176".
-
-- reg: Must contains offset/length value for controller.
-
-- #address-cells: Must be 2. The partition number has to be encoded in the
- first address cell and it may accept values 0..N-1
- (N - total number of partitions). The second cell is the
- offset into the partition.
-
-- #size-cells: Must be set to 1.
-
-- ranges: Must contain one or more chip select memory regions.
-
-- clocks: Must contain references to controller clocks.
-
-- clock-names: Must contain "mpmcclk" and "apb_pclk".
-
-- clock-ranges: Empty property indicating that child nodes can inherit
- named clocks. Required only if clock tree data present
- in device tree.
- See clock-bindings.txt
-
-Child chip-select (cs) nodes contain the memory devices nodes connected to
-such as NOR (e.g. cfi-flash) and NAND.
-
-Required child cs node properties:
-
-- #address-cells: Must be 2.
-
-- #size-cells: Must be 1.
-
-- ranges: Empty property indicating that child nodes can inherit
- memory layout.
-
-- clock-ranges: Empty property indicating that child nodes can inherit
- named clocks. Required only if clock tree data present
- in device tree.
-
-- mpmc,cs: Chip select number. Indicates to the pl0172 driver
- which chipselect is used for accessing the memory.
-
-- mpmc,memory-width: Width of the chip select memory. Must be equal to
- either 8, 16 or 32.
-
-Optional child cs node config properties:
-
-- mpmc,async-page-mode: Enable asynchronous page mode.
-
-- mpmc,cs-active-high: Set chip select polarity to active high.
-
-- mpmc,byte-lane-low: Set byte lane state to low.
-
-- mpmc,extended-wait: Enable extended wait.
-
-- mpmc,buffer-enable: Enable write buffer, option is not supported by
- PL175 and PL176 controllers.
-
-- mpmc,write-protect: Enable write protect.
-
-Optional child cs node timing properties:
-
-- mpmc,write-enable-delay: Delay from chip select assertion to write
- enable (WE signal) in nano seconds.
-
-- mpmc,output-enable-delay: Delay from chip select assertion to output
- enable (OE signal) in nano seconds.
-
-- mpmc,write-access-delay: Delay from chip select assertion to write
- access in nano seconds.
-
-- mpmc,read-access-delay: Delay from chip select assertion to read
- access in nano seconds.
-
-- mpmc,page-mode-read-delay: Delay for asynchronous page mode sequential
- accesses in nano seconds.
-
-- mpmc,turn-round-delay: Delay between access to memory banks in nano
- seconds.
-
-If any of the above timing parameters are absent, current parameter value will
-be taken from the corresponding HW reg.
-
-Example for pl172 with nor flash on chip select 0 shown below.
-
-emc: memory-controller@40005000 {
- compatible = "arm,pl172", "arm,primecell";
- reg = <0x40005000 0x1000>;
- clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
- clock-names = "mpmcclk", "apb_pclk";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x1c000000 0x1000000
- 1 0 0x1d000000 0x1000000
- 2 0 0x1e000000 0x1000000
- 3 0 0x1f000000 0x1000000>;
-
- cs0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges;
-
- mpmc,cs = <0>;
- mpmc,memory-width = <16>;
- mpmc,byte-lane-low;
- mpmc,write-enable-delay = <0>;
- mpmc,output-enable-delay = <0>;
- mpmc,read-enable-delay = <70>;
- mpmc,page-mode-read-delay = <70>;
-
- flash@0,0 {
- compatible = "sst,sst39vf320", "cfi-flash";
- reg = <0 0 0x400000>;
- bank-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "data";
- reg = <0 0x400000>;
- };
- };
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl172.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL172/PL175/PL176 MultiPort Memory Controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl172
+ - arm,pl175
+ - arm,pl176
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - arm,pl172
+ - arm,pl175
+ - arm,pl176
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: mpmcclk
+ - const: apb_pclk
+
+ clock-ranges: true
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ "^cs[0-9]$":
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^flash@[0-9],[0-9a-f]+$":
+ type: object
+ $ref: /schemas/mtd/mtd-physmap.yaml#
+ unevaluatedProperties: false
+
+ "^(gpio|sram)@[0-9],[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+ clocks:
+ maxItems: 2
+
+ clock-ranges: true
+
+ mpmc,cs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Chip select number. Indicates to the pl0172 driver
+ which chipselect is used for accessing the memory.
+
+ mpmc,memory-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8, 16, 32]
+ description:
+ Width of the chip select memory. Must be equal to either 8, 16 or 32.
+
+ mpmc,async-page-mode:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable asynchronous page mode.
+
+ mpmc,cs-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set chip select polarity to active high.
+
+ mpmc,byte-lane-low:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set byte lane state to low.
+
+ mpmc,extended-wait:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable extended wait.
+
+ mpmc,buffer-enable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable write buffer, option is not supported by
+ PL175 and PL176 controllers.
+
+ mpmc,write-protect:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable write protect.
+
+ mpmc,read-enable-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay from chip select assertion to read
+ enable (RE signal) in nano seconds.
+
+ mpmc,write-enable-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay from chip select assertion to write
+ enable (WE signal) in nano seconds.
+
+ mpmc,output-enable-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay from chip select assertion to output
+ enable (OE signal) in nano seconds.
+
+ mpmc,write-access-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay from chip select assertion to write
+ access in nano seconds.
+
+ mpmc,read-access-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay from chip select assertion to read
+ access in nano seconds.
+
+ mpmc,page-mode-read-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay for asynchronous page mode sequential
+ accesses in nano seconds.
+
+ mpmc,turn-round-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Delay between access to memory banks in nano
+ seconds.
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+ - ranges
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ memory-controller@40005000 {
+ compatible = "arm,pl172", "arm,primecell";
+ reg = <0x40005000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+ clock-names = "mpmcclk", "apb_pclk";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1c000000 0x1000000
+ 1 0 0x1d000000 0x1000000
+ 2 0 0x1e000000 0x1000000
+ 3 0 0x1f000000 0x1000000>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-enable-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ flash@0,0 {
+ compatible = "sst,sst39vf320", "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "data";
+ reg = <0 0x400000>;
+ };
+ };
+ };
+ };
properties:
compatible:
- items:
- - enum:
- - brcm,brcmstb-memc-ddr-rev-b.1.x
- - brcm,brcmstb-memc-ddr-rev-b.2.0
- - brcm,brcmstb-memc-ddr-rev-b.2.1
- - brcm,brcmstb-memc-ddr-rev-b.2.2
- - brcm,brcmstb-memc-ddr-rev-b.2.3
- - brcm,brcmstb-memc-ddr-rev-b.2.5
- - brcm,brcmstb-memc-ddr-rev-b.2.6
- - brcm,brcmstb-memc-ddr-rev-b.2.7
- - brcm,brcmstb-memc-ddr-rev-b.2.8
- - brcm,brcmstb-memc-ddr-rev-b.3.0
- - brcm,brcmstb-memc-ddr-rev-b.3.1
- - brcm,brcmstb-memc-ddr-rev-c.1.0
- - brcm,brcmstb-memc-ddr-rev-c.1.1
- - brcm,brcmstb-memc-ddr-rev-c.1.2
- - brcm,brcmstb-memc-ddr-rev-c.1.3
- - brcm,brcmstb-memc-ddr-rev-c.1.4
- - const: brcm,brcmstb-memc-ddr
+ oneOf:
+ - description: Revision > 2.1 controllers
+ items:
+ - enum:
+ - brcm,brcmstb-memc-ddr-rev-b.2.2
+ - brcm,brcmstb-memc-ddr-rev-b.2.3
+ - brcm,brcmstb-memc-ddr-rev-b.2.5
+ - brcm,brcmstb-memc-ddr-rev-b.2.6
+ - brcm,brcmstb-memc-ddr-rev-b.2.7
+ - brcm,brcmstb-memc-ddr-rev-b.2.8
+ - brcm,brcmstb-memc-ddr-rev-b.3.0
+ - brcm,brcmstb-memc-ddr-rev-b.3.1
+ - brcm,brcmstb-memc-ddr-rev-c.1.0
+ - brcm,brcmstb-memc-ddr-rev-c.1.1
+ - brcm,brcmstb-memc-ddr-rev-c.1.2
+ - brcm,brcmstb-memc-ddr-rev-c.1.3
+ - brcm,brcmstb-memc-ddr-rev-c.1.4
+ - const: brcm,brcmstb-memc-ddr-rev-b.2.1
+ - const: brcm,brcmstb-memc-ddr
+ - description: Revision 2.1 controllers
+ items:
+ - const: brcm,brcmstb-memc-ddr-rev-b.2.1
+ - const: brcm,brcmstb-memc-ddr
+ - description: Revision 2.0 controllers
+ items:
+ - const: brcm,brcmstb-memc-ddr-rev-b.2.0
+ - const: brcm,brcmstb-memc-ddr
+ - description: Revision 1.x controllers
+ items:
+ - const: brcm,brcmstb-memc-ddr-rev-b.1.x
+ - const: brcm,brcmstb-memc-ddr
reg:
maxItems: 1
examples:
- |
memory-controller@9902000 {
- compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr";
+ compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1",
+ "brcm,brcmstb-memc-ddr-rev-b.2.1",
+ "brcm,brcmstb-memc-ddr";
reg = <0x9902000 0x600>;
clock-frequency = <2133000000>;
};
- nvidia,tegra186-mc
- nvidia,tegra194-mc
- nvidia,tegra234-mc
+ - nvidia,tegra264-mc
reg:
minItems: 6
maxItems: 18
interrupts:
- items:
- - description: MC general interrupt
+ minItems: 1
+ maxItems: 8
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 8
"#address-cells":
const: 2
- nvidia,tegra186-emc
- nvidia,tegra194-emc
- nvidia,tegra234-emc
+ - nvidia,tegra264-emc
reg:
minItems: 1
reg:
minItems: 2
+ - if:
+ properties:
+ compatible:
+ const: nvidia,tegra264-emc
+ then:
+ properties:
+ reg:
+ minItems: 2
+
additionalProperties: false
required:
- const: ch2
- const: ch3
+ interrupts:
+ items:
+ - description: MC general interrupt
+
+ interrupt-names: false
+
- if:
properties:
compatible:
- const: ch14
- const: ch15
+ interrupts:
+ items:
+ - description: MC general interrupt
+
+ interrupt-names: false
+
- if:
properties:
compatible:
- const: ch14
- const: ch15
+ interrupts:
+ items:
+ - description: MC general interrupt
+
+ interrupt-names: false
+
+ - if:
+ properties:
+ compatible:
+ const: nvidia,tegra264-mc
+ then:
+ properties:
+ reg:
+ minItems: 17
+ maxItems: 17
+ description: 17 memory controller channels
+
+ reg-names:
+ items:
+ - const: broadcast
+ - const: ch0
+ - const: ch1
+ - const: ch2
+ - const: ch3
+ - const: ch4
+ - const: ch5
+ - const: ch6
+ - const: ch7
+ - const: ch8
+ - const: ch9
+ - const: ch10
+ - const: ch11
+ - const: ch12
+ - const: ch13
+ - const: ch14
+ - const: ch15
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+ description: One interrupt line for each MC component
+
+ interrupt-names:
+ items:
+ - const: mcf
+ - const: hub1
+ - const: hub2
+ - const: hub3
+ - const: hub4
+ - const: hub5
+ - const: sbs
+ - const: channel
+
additionalProperties: false
required:
properties:
compatible:
- const: renesas,r9a09g047-xspi # RZ/G3E
+ oneOf:
+ - const: renesas,r9a09g047-xspi # RZ/G3E
+
+ - items:
+ - enum:
+ - renesas,r9a09g056-xspi # RZ/V2N
+ - renesas,r9a09g057-xspi # RZ/V2H(P)
+ - const: renesas,r9a09g047-xspi
reg:
items:
properties:
compatible:
- items:
- - enum:
- - adi,adp5585-00 # Default
- - adi,adp5585-01 # 11 GPIOs
- - adi,adp5585-02 # No pull-up resistors by default on special pins
- - adi,adp5585-03 # Alternate I2C address
- - adi,adp5585-04 # Pull-down resistors on all pins by default
- - const: adi,adp5585
+ oneOf:
+ - items:
+ - enum:
+ - adi,adp5585-00 # Default
+ - adi,adp5585-01 # 11 GPIOs
+ - adi,adp5585-02 # No pull-up resistors by default on special pins
+ - adi,adp5585-03 # Alternate I2C address
+ - adi,adp5585-04 # Pull-down resistors on all pins by default
+ - const: adi,adp5585
+ - items:
+ - enum:
+ - adi,adp5589-00 # Default
+ - adi,adp5589-01 # R4 defaulted to RESET1 output
+ - adi,adp5589-02 # Pull-down resistors by default on special pins
+ - const: adi,adp5589
reg:
maxItems: 1
vdd-supply: true
+ reset-gpios:
+ maxItems: 1
+
gpio-controller: true
'#gpio-cells':
"#pwm-cells":
const: 3
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ poll-interval:
+ enum: [10, 20, 30, 40]
+ default: 10
+
+ adi,keypad-pins:
+ description: Specifies the pins used for the keypad matrix.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ adi,unlock-events:
+ description:
+ Specifies a maximum of 2 events that can be used to unlock the keypad.
+ If this property is set, the keyboard will be locked and only unlocked
+ after these keys/gpis are pressed. The value 127 serves as a wildcard which
+ means any key can be used for unlocking.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
+ - const: 127
+
+ adi,unlock-trigger-sec:
+ description:
+ Defines the time in which the second unlock event must occur after the
+ first unlock event has occurred.
+ maximum: 7
+ default: 0
+
+ adi,reset1-events:
+ description:
+ Defines the trigger events (key/gpi presses) that can generate reset
+ conditions one the reset1 block.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 3
+
+ adi,reset2-events:
+ description:
+ Defines the trigger events (key/gpi presses) that can generate reset
+ conditions one the reset2 block.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+
+ adi,reset1-active-high:
+ description: Sets the reset1 signal as active high.
+ type: boolean
+
+ adi,reset2-active-high:
+ description: Sets the reset2 signal as active high.
+ type: boolean
+
+ adi,rst-passthrough-enable:
+ description: Allows the RST pin to override (OR with) the reset1 signal.
+ type: boolean
+
+ adi,reset-trigger-ms:
+ description:
+ Defines the length of time that the reset events must be active before a
+ reset signal is generated. All events must be active at the same time for
+ the same duration.
+ enum: [0, 1000, 1500, 2000, 2500, 3000, 3500, 4000]
+ default: 0
+
+ adi,reset-pulse-width-us:
+ description: Defines the pulse width of the reset signals.
+ enum: [500, 1000, 2000, 10000]
+ default: 500
+
patternProperties:
"-hog(-[0-9]+)?$":
type: object
required:
- gpio-hog
+dependencies:
+ linux,keymap:
+ - adi,keypad-pins
+ - interrupts
+ interrupt-controller:
+ - interrupts
+ adi,unlock-trigger-sec:
+ - adi,unlock-events
+ adi,reset1-active-high:
+ - adi,reset1-events
+ adi,rst-passtrough-enable:
+ - adi,reset1-events
+ adi,reset2-active-high:
+ - adi,reset2-events
+
required:
- compatible
- reg
- - gpio-controller
- - "#gpio-cells"
- - "#pwm-cells"
allOf:
+ - $ref: /schemas/input/matrix-keymap.yaml#
+ - $ref: /schemas/input/input.yaml#
- if:
properties:
compatible:
const: adi,adp5585-01
then:
properties:
+ adi,unlock-events: false
+ adi,unlock-trigger-sec: false
gpio-reserved-ranges: false
- else:
+ reset-gpios: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 11
+ items:
+ minimum: 0
+ maximum: 10
+ adi,reset1-events:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 30
+ - minimum: 37
+ maximum: 47
+ adi,reset2-events:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 30
+ - minimum: 37
+ maximum: 47
+ - if:
properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adp5585-00
+ - adi,adp5585-02
+ - adi,adp5585-03
+ - adi,adp5585-04
+ then:
+ properties:
+ adi,unlock-events: false
+ adi,unlock-trigger-sec: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 10
+ items:
+ enum: [0, 1, 2, 3, 4, 6, 7, 8, 9, 10]
+ adi,reset1-events:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 25
+ - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
+ adi,reset2-events:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 25
+ - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
gpio-reserved-ranges:
maxItems: 1
items:
- const: 5
- const: 1
-additionalProperties: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adp5589-00
+ - adi,adp5589-01
+ - adi,adp5589-02
+ then:
+ properties:
+ gpio-reserved-ranges: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 19
+ items:
+ minimum: 0
+ maximum: 18
+ adi,reset1-events:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
+ adi,reset2-events:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
+
+unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
gpio-reserved-ranges = <5 1>;
#pwm-cells = <3>;
+
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,reset1-events = <1 43>;
+ adi,reset2-events = <2 3>;
+ adi,reset-trigger-ms = <2000>;
+
+ /*
+ * col0, col1, col2
+ * row0, row1, row2
+ */
+ adi,keypad-pins = <0 1 2 6 7 8>;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x00, KEY_1)
+ MATRIX_KEY(0x00, 0x01, KEY_2)
+ MATRIX_KEY(0x00, 0x02, KEY_3)
+
+ MATRIX_KEY(0x01, 0x00, KEY_A)
+ MATRIX_KEY(0x01, 0x01, KEY_B)
+ MATRIX_KEY(0x01, 0x02, KEY_C)
+
+ MATRIX_KEY(0x02, 0x00, BTN_1)
+ MATRIX_KEY(0x02, 0x01, BTN_2)
+ MATRIX_KEY(0x02, 0x02, BTN_3)
+ >;
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/apple,smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Mac System Management Controller
+
+maintainers:
+ - Sven Peter <sven@kernel.org>
+
+description:
+ Apple Mac System Management Controller implements various functions
+ such as GPIO, RTC, power, reboot.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t6000-smc
+ - apple,t8103-smc
+ - apple,t8112-smc
+ - const: apple,smc
+
+ reg:
+ items:
+ - description: SMC area
+ - description: SRAM area
+
+ reg-names:
+ items:
+ - const: smc
+ - const: sram
+
+ mboxes:
+ maxItems: 1
+
+ gpio:
+ $ref: /schemas/gpio/apple,smc-gpio.yaml
+
+ reboot:
+ $ref: /schemas/power/reset/apple,smc-reboot.yaml
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - mboxes
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ smc@23e400000 {
+ compatible = "apple,t8103-smc", "apple,smc";
+ reg = <0x2 0x3e400000 0x0 0x4000>,
+ <0x2 0x3fe00000 0x0 0x100000>;
+ reg-names = "smc", "sram";
+ mboxes = <&smc_mbox>;
+
+ smc_gpio: gpio {
+ compatible = "apple,smc-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ reboot {
+ compatible = "apple,smc-reboot";
+ nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+ <&boot_error_count>, <&panic_count>;
+ nvmem-cell-names = "shutdown_flag", "boot_stage",
+ "boot_error_count", "panic_count";
+ };
+ };
+ };
+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale i.MX8qm/qxp Control and Status Registers Module
-
-maintainers:
- - Liu Ying <victor.liu@nxp.com>
-
-description: |
- As a system controller, the Freescale i.MX8qm/qxp Control and Status
- Registers(CSR) module represents a set of miscellaneous registers of a
- specific subsystem. It may provide control and/or status report interfaces
- to a mix of standalone hardware devices within that subsystem. One typical
- use-case is for some other nodes to acquire a reference to the syscon node
- by phandle, and the other typical use-case is that the operating system
- should consider all subnodes of the CSR module as separate child devices.
-
-properties:
- $nodename:
- pattern: "^syscon@[0-9a-f]+$"
-
- compatible:
- items:
- - enum:
- - fsl,imx8qxp-mipi-lvds-csr
- - fsl,imx8qm-lvds-csr
- - const: syscon
- - const: simple-mfd
-
- reg:
- maxItems: 1
-
- clocks:
- maxItems: 1
-
- clock-names:
- const: ipg
-
-patternProperties:
- "^(ldb|phy|pxl2dpi)$":
- type: object
- description: The possible child devices of the CSR module.
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
-
-allOf:
- - if:
- properties:
- compatible:
- contains:
- const: fsl,imx8qxp-mipi-lvds-csr
- then:
- required:
- - pxl2dpi
- - ldb
-
- - if:
- properties:
- compatible:
- contains:
- const: fsl,imx8qm-lvds-csr
- then:
- required:
- - phy
- - ldb
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/imx8-lpcg.h>
- #include <dt-bindings/firmware/imx/rsrc.h>
- mipi_lvds_0_csr: syscon@56221000 {
- compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
- reg = <0x56221000 0x1000>;
- clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
- clock-names = "ipg";
-
- mipi_lvds_0_pxl2dpi: pxl2dpi {
- compatible = "fsl,imx8qxp-pxl2dpi";
- fsl,sc-resource = <IMX_SC_R_MIPI_0>;
- power-domains = <&pd IMX_SC_R_MIPI_0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
- };
-
- mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
- };
- };
-
- port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
- };
-
- mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
- };
- };
- };
- };
-
- mipi_lvds_0_ldb: ldb {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx8qxp-ldb";
- clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
- <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
- clock-names = "pixel", "bypass";
- power-domains = <&pd IMX_SC_R_LVDS_0>;
-
- channel@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- phys = <&mipi_lvds_0_phy>;
- phy-names = "lvds_phy";
-
- port@0 {
- reg = <0>;
-
- mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
- remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- /* ... */
- };
- };
-
- channel@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- phys = <&mipi_lvds_0_phy>;
- phy-names = "lvds_phy";
-
- port@0 {
- reg = <0>;
-
- mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
- remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- /* ... */
- };
- };
- };
- };
-
- mipi_lvds_0_phy: phy@56228300 {
- compatible = "fsl,imx8qxp-mipi-dphy";
- reg = <0x56228300 0x100>;
- clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
- clock-names = "phy_ref";
- #phy-cells = <0>;
- fsl,syscon = <&mipi_lvds_0_csr>;
- power-domains = <&pd IMX_SC_R_MIPI_0>;
- };
LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm.
For the LP3943 GPIO properties please refer to:
-Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
For the LP3943 PWM properties please refer to:
Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
-- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
- Documentation/devicetree/bindings/leds/leds-cpcap.txt
+++ /dev/null
-* Freescale MXS LRADC device driver
-
-Required properties:
-- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
- for i.MX28 SoC
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the LRADC interrupts
-
-Optional properties:
-- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
- to LRADC. Valid value is either 4 or 5. If this
- property is not present, then the touchscreen is
- disabled. 5 wires is valid for i.MX28 SoC only.
-- fsl,ave-ctrl: number of samples per direction to calculate an average value.
- Allowed value is 1 ... 32, default is 4
-- fsl,ave-delay: delay between consecutive samples. Allowed value is
- 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
- 2 kHz and its default is 2 (= 1 ms)
-- fsl,settling: delay between plate switch to next sample. Allowed value is
- 1 ... 2047. It counts at 2 kHz and its default is
- 10 (= 5 ms)
-
-Example for i.MX23 SoC:
-
- lradc@80050000 {
- compatible = "fsl,imx23-lradc";
- reg = <0x80050000 0x2000>;
- interrupts = <36 37 38 39 40 41 42 43 44>;
- fsl,lradc-touchscreen-wires = <4>;
- fsl,ave-ctrl = <4>;
- fsl,ave-delay = <2>;
- fsl,settling = <10>;
- };
-
-Example for i.MX28 SoC:
-
- lradc@80050000 {
- compatible = "fsl,imx28-lradc";
- reg = <0x80050000 0x2000>;
- interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
- fsl,lradc-touchscreen-wires = <5>;
- fsl,ave-ctrl = <4>;
- fsl,ave-delay = <2>;
- fsl,settling = <10>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mxs-lradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Low-Resolution ADC (LRADC)
+
+maintainers:
+ - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+description:
+ The LRADC provides 16 physical channels of 12-bit resolution for
+ analog-to-digital conversion and includes an integrated 4-wire/5-wire
+ touchscreen controller.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx23-lradc
+ - fsl,imx28-lradc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+ interrupts:
+ minItems: 9
+ maxItems: 13
+
+ fsl,lradc-touchscreen-wires:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [4, 5]
+ description: >
+ Number of wires used to connect the touchscreen to LRADC.
+
+ If this property is not present, then the touchscreen is disabled.
+
+ fsl,ave-ctrl:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ default: 4
+ description:
+ Number of samples per direction to calculate an average value.
+
+ fsl,ave-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2
+ maximum: 2048
+ default: 2
+ description: >
+ Delay between consecutive samples.
+
+ It is used if 'fsl,ave-ctrl' > 1, counts at 2 kHz and its default value (2)
+ is 1 ms.
+
+ fsl,settling:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 2047
+ default: 10
+ description: >
+ Delay between plate switch to next sample.
+
+ It counts at 2 kHz and its default (10) is 5 ms.
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx23-lradc
+then:
+ properties:
+ interrupts:
+ items:
+ - description: channel 0
+ - description: channel 1
+ - description: channel 2
+ - description: channel 3
+ - description: channel 4
+ - description: channel 5
+ - description: touchscreen
+ - description: channel 6
+ - description: channel 7
+ fsl,lradc-touchscreen-wires:
+ const: 4
+else:
+ properties:
+ interrupts:
+ items:
+ - description: threshold 0
+ - description: threshold 1
+ - description: channel 0
+ - description: channel 1
+ - description: channel 2
+ - description: channel 3
+ - description: channel 4
+ - description: channel 5
+ - description: button 0
+ - description: button 1
+ - description: touchscreen
+ - description: channel 6
+ - description: channel 7
+
+additionalProperties: false
+
+examples:
+ - |
+ lradc@80050000 {
+ compatible = "fsl,imx23-lradc";
+ reg = <0x80050000 0x2000>;
+ interrupts = <36>, <37>, <38>, <39>, <40>,
+ <41>, <42>, <43>, <44>;
+ clocks = <&clks 26>;
+ #io-channel-cells = <1>;
+ fsl,lradc-touchscreen-wires = <4>;
+ fsl,ave-ctrl = <4>;
+ fsl,ave-delay = <2>;
+ fsl,settling = <10>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/nxp,lpc1850-creg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The NXP LPC18xx/43xx CREG (Configuration Registers) block
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - nxp,lpc1850-creg
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clock-controller:
+ type: object
+ description:
+ The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
+ control registers for two low speed clocks. One of the clocks is a
+ 32 kHz oscillator driver with power up/down and clock gating. Next
+ is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
+
+ These clocks are used by the RTC and the Event Router peripherals.
+ The 32 kHz can also be routed to other peripherals to enable low
+ power modes.
+
+ properties:
+ compatible:
+ const: nxp,lpc1850-creg-clk
+
+ clocks:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+ description: |
+ 0 1 kHz clock
+ 1 32 kHz Oscillator
+
+ required:
+ - compatible
+ - clocks
+ - '#clock-cells'
+
+ additionalProperties: false
+
+ phy:
+ type: object
+ description: the internal USB OTG PHY in NXP LPC18xx and LPC43xx SoCs
+ properties:
+ compatible:
+ const: nxp,lpc1850-usb-otg-phy
+
+ clocks:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ required:
+ - compatible
+ - clocks
+ - '#phy-cells'
+
+ additionalProperties: false
+
+ dma-mux:
+ type: object
+ description: NXP LPC18xx/43xx DMA MUX (DMA request router)
+ properties:
+ compatible:
+ const: nxp,lpc1850-dmamux
+
+ '#dma-cells':
+ const: 3
+ description: |
+ Should be set to <3>.
+ * 1st cell contain the master dma request signal
+ * 2nd cell contain the mux value (0-3) for the peripheral
+ * 3rd cell contain either 1 or 2 depending on the AHB master used.
+
+ dma-requests:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 64
+ description: Number of DMA requests the controller can handle
+
+ dma-masters:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle pointing to the DMA controller
+
+ required:
+ - compatible
+ - '#dma-cells'
+ - dma-masters
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ syscon@40043000 {
+ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+ reg = <0x40043000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_CREG>;
+ resets = <&rgu 5>;
+
+ clock-controller {
+ compatible = "nxp,lpc1850-creg-clk";
+ clocks = <&xtal32>;
+ #clock-cells = <1>;
+ };
+
+ phy {
+ compatible = "nxp,lpc1850-usb-otg-phy";
+ clocks = <&ccu1 CLK_USB0>;
+ #phy-cells = <0>;
+ };
+
+ dma-mux {
+ compatible = "nxp,lpc1850-dmamux";
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&dmac>;
+ };
+ };
system-power-controller: true
+ rockchip,reset-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ description:
+ Mode to use when a reset of the PMIC is triggered.
+
+ The reset can be triggered either programmatically, via one of
+ the PWRCTRL pins (provided additional configuration) or
+ asserting RESETB pin low.
+
+ The following modes are supported
+
+ - 0; restart PMU,
+ - 1; reset all power off reset registers and force state to
+ switch to ACTIVE mode,
+ - 2; same as mode 1 and also pull RESETB pin down for 5ms,
+
+ For example, some hardware may require a full restart (mode 0)
+ in order to function properly as regulators are shortly
+ interrupted in this mode.
+
vcc1-supply:
description:
The input supply for dcdc-reg1.
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
+ # oneOf is required, because dtschema's fixups.py doesn't handle this
+ # nesting here. Its special treatment to allow either interrupt property
+ # when only one is specified in the binding works at the top level only.
oneOf:
- required: [interrupts]
- required: [interrupts-extended]
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps65910.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS65910 Power Management Integrated Circuit
+
+maintainers:
+ - Shree Ramamoorthy <s-ramamoorthy@ti.com>
+
+description:
+ TPS65910 device is a Power Management IC that provides 3 step-down converters,
+ 1 stepup converter, and 8 LDOs. The device contains an embedded power controller (EPC),
+ 1 GPIO, and an RTC.
+
+properties:
+ compatible:
+ enum:
+ - ti,tps65910
+ - ti,tps65911
+
+ reg:
+ description: I2C slave address
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+ description: |
+ The first cell is the GPIO number.
+ The second cell is used to specify additional options <unused>.
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description: Specifies the IRQ number and flags
+ const: 2
+
+ ti,vmbch-threshold:
+ description: |
+ (TPS65911) Main battery charged threshold comparator.
+ See VMBCH_VSEL in TPS65910 datasheet.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ ti,vmbch2-threshold:
+ description: |
+ (TPS65911) Main battery discharged threshold comparator.
+ See VMBCH_VSEL in TPS65910 datasheet.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ ti,en-ck32k-xtal:
+ type: boolean
+ description: Enable external 32-kHz crystal oscillator.
+
+ ti,en-gpio-sleep:
+ description: |
+ Enable sleep control for gpios.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 9
+ maxItems: 9
+ items:
+ minimum: 0
+ maximum: 1
+
+ ti,system-power-controller:
+ type: boolean
+ description: Identify whether or not this pmic controls the system power
+
+ ti,sleep-enable:
+ type: boolean
+ description: Enable SLEEP state.
+
+ ti,sleep-keep-therm:
+ type: boolean
+ description: Keep thermal monitoring on in sleep state.
+
+ ti,sleep-keep-ck32k:
+ type: boolean
+ description: Keep the 32KHz clock output on in sleep state.
+
+ ti,sleep-keep-hsclk:
+ type: boolean
+ description: Keep high speed internal clock on in sleep state.
+
+ regulators:
+ type: object
+ additionalProperties: false
+ description: List of regulators provided by this controller.
+
+ patternProperties:
+ "^(vrtc|vio|vpll|vdac|vmmc|vbb|vddctrl)$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ ti,regulator-ext-sleep-control:
+ description: |
+ Enable external sleep control through external inputs:
+ [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)].
+ If this property is not defined, it defaults to 0 (not enabled).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 4, 8]
+ unevaluatedProperties: false
+
+ "^(vdd[1-3]|vaux([1-2]|33)|vdig[1-2])$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ ti,regulator-ext-sleep-control:
+ description: |
+ Enable external sleep control through external inputs:
+ [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)].
+ If this property is not defined, it defaults to 0 (not enabled).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 4, 8]
+ unevaluatedProperties: false
+
+ "^ldo[1-8]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ properties:
+ ti,regulator-ext-sleep-control:
+ description: |
+ Enable external sleep control through external inputs:
+ [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)].
+ If this property is not defined, it defaults to 0 (not enabled).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 4, 8]
+ unevaluatedProperties: false
+
+patternProperties:
+ "^(vcc(io|[1-7])-supply)$":
+ description: |
+ Input voltage supply phandle for regulators.
+ These entries are required if PMIC regulators are enabled, or else it
+ can cause the regulator registration to fail.
+
+ If some input supply is powered through battery or always-on supply, then
+ it is also required to have these parameters with the proper node handle for always-on
+ power supply.
+ tps65910:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: VAUX33 and VMMC input.
+ vcc4-supply: VAUX1 and VAUX2 input.
+ vcc5-supply: VPLL and VDAC input.
+ vcc6-supply: VDIG1 and VDIG2 input.
+ vcc7-supply: VRTC and VBB input.
+ vccio-supply: VIO input.
+ tps65911:
+ vcc1-supply: VDD1 input.
+ vcc2-supply: VDD2 input.
+ vcc3-supply: LDO6, LDO7 and LDO8 input.
+ vcc4-supply: LDO5 input.
+ vcc5-supply: LDO3 and LDO4 input.
+ vcc6-supply: LDO1 and LDO2 input.
+ vcc7-supply: VRTC input.
+ vccio-supply: VIO input.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - regulators
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,tps65910
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(ldo[1-8]|vddctrl)$": false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,tps65911
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(vdd3|vaux([1-2]|33)|vdig[1-2])$": false
+ "^(vpll|vdac|vmmc|vbb)$": false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic: tps65910@2d {
+ compatible = "ti,tps65910";
+ reg = <0x2d>;
+ interrupt-parent = <&intc>;
+ interrupts = < 0 118 0x04 >;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ ti,vmbch-threshold = <0>;
+ ti,vmbch2-threshold = <0>;
+ ti,en-ck32k-xtal;
+ ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+ vcc1-supply = <®_parent>;
+ vcc2-supply = <&some_reg>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vio_reg: vio {
+ regulator-name = "vio";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vdd1_reg: vdd1 {
+ regulator-name = "vdd1";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <0>;
+ };
+ vdd2_reg: vdd2 {
+ regulator-name = "vdd2";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vdd3_reg: vdd3 {
+ regulator-name = "vdd3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ vdig1_reg: vdig1 {
+ regulator-name = "vdig1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+ vdig2_reg: vdig2 {
+ regulator-name = "vdig2";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ vpll_reg: vpll {
+ regulator-name = "vpll";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ vdac_reg: vdac {
+ regulator-name = "vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ vaux1_reg: vaux1 {
+ regulator-name = "vaux1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ vaux2_reg: vaux2 {
+ regulator-name = "vaux2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vaux33_reg: vaux33 {
+ regulator-name = "vaux33";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vmmc_reg: vmmc {
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
- ti,tps6593-q1
- ti,tps6594-q1
- ti,tps65224-q1
+ - ti,tps652g1
reg:
description: I2C slave address or SPI chip select number.
+++ /dev/null
-TPS65910 Power Management Integrated Circuit
-
-Required properties:
-- compatible: "ti,tps65910" or "ti,tps65911"
-- reg: I2C slave address
-- interrupts: the interrupt outputs of the controller
-- #gpio-cells: number of cells to describe a GPIO, this should be 2.
- The first cell is the GPIO number.
- The second cell is used to specify additional options <unused>.
-- gpio-controller: mark the device as a GPIO controller
-- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
- The first cell is the IRQ number.
- The second cell is the flags, encoded as the trigger masks from
- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-- regulators: This is the list of child nodes that specify the regulator
- initialization data for defined regulators. Not all regulators for the given
- device need to be present. The definition for each of these nodes is defined
- using the standard binding for regulators found at
- Documentation/devicetree/bindings/regulator/regulator.txt.
- The regulator is matched with the regulator-compatible.
-
- The valid regulator-compatible values are:
- tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
- vaux2, vaux33, vmmc, vbb
- tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
- ldo6, ldo7, ldo8
-
-- xxx-supply: Input voltage supply regulator.
- These entries are required if regulators are enabled for a device. Missing these
- properties can cause the regulator registration to fail.
- If some of input supply is powered through battery or always-on supply then
- also it is require to have these parameters with proper node handle of always
- on power supply.
- tps65910:
- vcc1-supply: VDD1 input.
- vcc2-supply: VDD2 input.
- vcc3-supply: VAUX33 and VMMC input.
- vcc4-supply: VAUX1 and VAUX2 input.
- vcc5-supply: VPLL and VDAC input.
- vcc6-supply: VDIG1 and VDIG2 input.
- vcc7-supply: VRTC and VBB input.
- vccio-supply: VIO input.
- tps65911:
- vcc1-supply: VDD1 input.
- vcc2-supply: VDD2 input.
- vcc3-supply: LDO6, LDO7 and LDO8 input.
- vcc4-supply: LDO5 input.
- vcc5-supply: LDO3 and LDO4 input.
- vcc6-supply: LDO1 and LDO2 input.
- vcc7-supply: VRTC input.
- vccio-supply: VIO input.
-
-Optional properties:
-- ti,vmbch-threshold: (tps65911) main battery charged threshold
- comparator. (see VMBCH_VSEL in TPS65910 datasheet)
-- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
- comparator. (see VMBCH_VSEL in TPS65910 datasheet)
-- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
- in TPS6591X datasheet)
-- ti,en-gpio-sleep: enable sleep control for gpios
- There should be 9 entries here, one for each gpio.
-- ti,system-power-controller: Telling whether or not this pmic is controlling
- the system power.
-- ti,sleep-enable: Enable SLEEP state.
-- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state.
-- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state.
-- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state.
-
-Regulator Optional properties:
-- ti,regulator-ext-sleep-control: enable external sleep
- control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
- If this property is not defined, it defaults to 0 (not enabled).
-
-Example:
-
- pmu: tps65910@d2 {
- compatible = "ti,tps65910";
- reg = <0xd2>;
- interrupt-parent = <&intc>;
- interrupts = < 0 118 0x04 >;
-
- #gpio-cells = <2>;
- gpio-controller;
-
- #interrupt-cells = <2>;
- interrupt-controller;
-
- ti,system-power-controller;
-
- ti,vmbch-threshold = 0;
- ti,vmbch2-threshold = 0;
- ti,en-ck32k-xtal;
- ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
-
- vcc1-supply = <®_parent>;
- vcc2-supply = <&some_reg>;
- vcc3-supply = <...>;
- vcc4-supply = <...>;
- vcc5-supply = <...>;
- vcc6-supply = <...>;
- vcc7-supply = <...>;
- vccio-supply = <...>;
-
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd1_reg: regulator@0 {
- regulator-compatible = "vdd1";
- reg = <0>;
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- ti,regulator-ext-sleep-control = <0>;
- };
- vdd2_reg: regulator@1 {
- regulator-compatible = "vdd2";
- reg = <1>;
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- ti,regulator-ext-sleep-control = <4>;
- };
- vddctrl_reg: regulator@2 {
- regulator-compatible = "vddctrl";
- reg = <2>;
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- ti,regulator-ext-sleep-control = <0>;
- };
- vio_reg: regulator@3 {
- regulator-compatible = "vio";
- reg = <3>;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- ti,regulator-ext-sleep-control = <1>;
- };
- ldo1_reg: regulator@4 {
- regulator-compatible = "ldo1";
- reg = <4>;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3300000>;
- ti,regulator-ext-sleep-control = <0>;
- };
- ldo2_reg: regulator@5 {
- regulator-compatible = "ldo2";
- reg = <5>;
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- ti,regulator-ext-sleep-control = <0>;
- };
- ldo3_reg: regulator@6 {
- regulator-compatible = "ldo3";
- reg = <6>;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3300000>;
- ti,regulator-ext-sleep-control = <0>;
- };
- ldo4_reg: regulator@7 {
- regulator-compatible = "ldo4";
- reg = <7>;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- ti,regulator-ext-sleep-control = <0>;
- };
- ldo5_reg: regulator@8 {
- regulator-compatible = "ldo5";
- reg = <8>;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3300000>;
- ti,regulator-ext-sleep-control = <0>;
- };
- ldo6_reg: regulator@9 {
- regulator-compatible = "ldo6";
- reg = <9>;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- ti,regulator-ext-sleep-control = <0>;
- };
- ldo7_reg: regulator@10 {
- regulator-compatible = "ldo7";
- reg = <10>;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- ti,regulator-ext-sleep-control = <1>;
- };
- ldo8_reg: regulator@11 {
- regulator-compatible = "ldo8";
- reg = <11>;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- ti,regulator-ext-sleep-control = <1>;
- };
- };
- };
examples:
- |
- / {
- compatible = "brcm,bcm3368";
- #address-cells = <1>;
- #size-cells = <1>;
- model = "Broadcom 3368";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mips-hpt-frequency = <150000000>;
-
- cpu@0 {
- compatible = "brcm,bmips4350";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "brcm,bmips4350";
- device_type = "cpu";
- reg = <1>;
- };
- };
- };
+ / {
+ compatible = "brcm,bcm3368";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Broadcom 3368";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <150000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+ };
...
#include <dt-bindings/interrupt-controller/irq.h>
qmgr: queue-manager@60000000 {
- compatible = "intel,ixp4xx-ahb-queue-manager";
- reg = <0x60000000 0x4000>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "intel,ixp4xx-ahb-queue-manager";
+ reg = <0x60000000 0x4000>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
};
- nvidia,tegra186-misc
- nvidia,tegra194-misc
- nvidia,tegra234-misc
+ - nvidia,tegra264-misc
reg:
items:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/pci1de4,1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi RP1 MFD PCI device
+
+maintainers:
+ - A. della Porta <andrea.porta@suse.com>
+
+description:
+ The RaspberryPi RP1 is a PCI multi function device containing
+ peripherals ranging from Ethernet to USB controller, I2C, SPI
+ and others.
+ The peripherals are accessed by addressing the PCI BAR1 region.
+
+allOf:
+ - $ref: /schemas/pci/pci-ep-bus.yaml
+
+properties:
+ compatible:
+ additionalItems: true
+ maxItems: 3
+ items:
+ - const: pci1de4,1
+
+ '#interrupt-cells':
+ const: 2
+ description: |
+ Specifies respectively the interrupt number and flags as defined
+ in include/dt-bindings/interrupt-controller/irq.h.
+ Since all interrupts are active high, only IRQ_TYPE_LEVEL_HIGH
+ and IRQ_TYPE_EDGE_RISING can be specified as type flags.
+ The supported values for the interrupt number are:
+ - IO BANK0: 0
+ - IO BANK1: 1
+ - IO BANK2: 2
+ - AUDIO IN: 3
+ - AUDIO OUT: 4
+ - PWM0: 5
+ - ETH: 6
+ - I2C0: 7
+ - I2C1: 8
+ - I2C2: 9
+ - I2C3: 10
+ - I2C4: 11
+ - I2C5: 12
+ - I2C6: 13
+ - I2S0: 14
+ - I2S1: 15
+ - I2S2: 16
+ - SDIO0: 17
+ - SDIO1: 18
+ - SPI0: 19
+ - SPI1: 20
+ - SPI2: 21
+ - SPI3: 22
+ - SPI4: 23
+ - SPI5: 24
+ - UART0: 25
+ - TIMER0: 26
+ - TIMER1: 27
+ - TIMER2: 28
+ - TIMER3: 29
+ - USB HOST0: 30
+ - USB HOST0-0: 31
+ - USB HOST0-1: 32
+ - USB HOST0-2: 33
+ - USB HOST0-3: 34
+ - USB HOST1: 35
+ - USB HOST1-0: 36
+ - USB HOST1-1: 37
+ - USB HOST1-2: 38
+ - USB HOST1-3: 39
+ - DMA: 40
+ - PWM1: 41
+ - UART1: 42
+ - UART2: 43
+ - UART3: 44
+ - UART4: 45
+ - UART5: 46
+ - MIPI0: 47
+ - MIPI1: 48
+ - VIDEO OUT: 49
+ - PIO0: 50
+ - PIO1: 51
+ - ADC FIFO: 52
+ - PCIE OUT: 53
+ - SPI6: 54
+ - SPI7: 55
+ - SPI8: 56
+ - PROC MISC: 57
+ - SYSCFG: 58
+ - CLOCKS DEFAULT: 59
+ - VBUSCTRL: 60
+
+ interrupt-controller: true
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - '#interrupt-cells'
+ - interrupt-controller
+ - pci-ep-bus@1
+
+examples:
+ - |
+ pci {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ rp1@0,0 {
+ compatible = "pci1de4,1";
+ ranges = <0x01 0x00 0x00000000 0x82010000 0x00 0x00 0x00 0x400000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pci_ep_bus: pci-ep-bus@1 {
+ compatible = "simple-bus";
+ ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>;
+ dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rp1_clocks: clocks@40018000 {
+ compatible = "raspberrypi,rp1-clocks";
+ reg = <0x00 0x40018000 0x0 0x10038>;
+ #clock-cells = <1>;
+ clocks = <&clk_rp1_xosc>;
+ };
+ };
+ };
+ };
- amd,pensando-elba-sd4hc
- microchip,mpfs-sd4hc
- microchip,pic64gx-sd4hc
+ - mobileye,eyeq-sd4hc
- socionext,uniphier-sd4hc
- const: cdns,sd4hc
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/loongson,ls2k0500-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The SD/SDIO/eMMC host controller for Loongson-2K family SoCs
+
+description:
+ The MMC host controller on the Loongson-2K0500/2K1000 (using an externally
+ shared apbdma controller) provides the SD and SDIO device interfaces.
+ The two MMC host controllers on the Loongson-2K2000 are similar,
+ except that they use internal exclusive DMA. one controller provides
+ the eMMC interface and the other provides the SD/SDIO interface.
+
+maintainers:
+ - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,ls2k0500-mmc
+ - loongson,ls2k1000-mmc
+ - loongson,ls2k2000-mmc
+
+ reg:
+ minItems: 1
+ items:
+ - description: Loongson-2K MMC controller registers.
+ - description: APB DMA config register for Loongson-2K MMC controller.
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - loongson,ls2k0500-mmc
+ - loongson,ls2k1000-mmc
+
+then:
+ properties:
+ reg:
+ minItems: 2
+
+ required:
+ - dmas
+ - dma-names
+
+else:
+ properties:
+ reg:
+ maxItems: 1
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+ mmc@1fe2c000 {
+ compatible = "loongson,ls2k1000-mmc";
+ reg = <0x1fe2c000 0x68>,
+ <0x1fe00438 0x8>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ dmas = <&apbdma1 0>;
+ dma-names = "rx-tx";
+ bus-width = <4>;
+ cd-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+ mmc@79990000 {
+ compatible = "loongson,ls2k2000-mmc";
+ reg = <0x79990000 0x1000>;
+ interrupt-parent = <&pic>;
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_EMMC_CLK>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ };
and the properties used by the mxsmmc driver.
allOf:
- - $ref: mmc-controller.yaml
+ - $ref: mmc-controller-common.yaml#
properties:
compatible:
interrupts:
maxItems: 1
+ clocks:
+ maxItems: 1
+
dmas:
maxItems: 1
- compatible
- reg
- interrupts
+ - clocks
- dmas
- dma-names
compatible = "fsl,imx28-mmc";
reg = <0x80010000 2000>;
interrupts = <96>;
+ clocks = <&clks 46>;
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
bus-width = <8>;
- enum:
- renesas,sdhi-r9a09g047 # RZ/G3E
- renesas,sdhi-r9a09g056 # RZ/V2N
+ - renesas,sdhi-r9a09g077 # RZ/T2H
+ - renesas,sdhi-r9a09g087 # RZ/N2H
- const: renesas,sdhi-r9a09g057 # RZ/V2H(P)
reg:
compatible:
contains:
enum:
- - renesas,sdhi-r9a09g057
- - renesas,rzg2l-sdhi
+ - renesas,sdhi-r9a09g077
+ - renesas,sdhi-r9a09g087
then:
properties:
+ resets: false
clocks:
items:
- - description: IMCLK, SDHI channel main clock1.
- - description: CLK_HS, SDHI channel High speed clock which operates
- 4 times that of SDHI channel main clock1.
- - description: IMCLK2, SDHI channel main clock2. When this clock is
- turned off, external SD card detection cannot be
- detected.
- - description: ACLK, SDHI channel bus clock.
+ - description: ACLK, IMCLK, SDHI channel bus and main clocks.
+ - description: CLK_HS, SDHI channel High speed clock.
clock-names:
items:
- - const: core
- - const: clkh
- - const: cd
- const: aclk
- required:
- - clock-names
- - resets
+ - const: clkh
else:
if:
properties:
compatible:
contains:
enum:
- - renesas,rcar-gen2-sdhi
- - renesas,rcar-gen3-sdhi
- - renesas,rcar-gen4-sdhi
+ - renesas,sdhi-r9a09g057
+ - renesas,rzg2l-sdhi
then:
properties:
clocks:
- minItems: 1
- maxItems: 3
- clock-names:
- minItems: 1
- uniqueItems: true
items:
- - const: core
- - enum: [ clkh, cd ]
- - const: cd
- else:
- properties:
- clocks:
- minItems: 1
- maxItems: 2
+ - description: IMCLK, SDHI channel main clock1.
+ - description: CLK_HS, SDHI channel High speed clock which operates
+ 4 times that of SDHI channel main clock1.
+ - description: IMCLK2, SDHI channel main clock2. When this clock is
+ turned off, external SD card detection cannot be
+ detected.
+ - description: ACLK, SDHI channel bus clock.
clock-names:
- minItems: 1
items:
- const: core
+ - const: clkh
- const: cd
+ - const: aclk
+ required:
+ - clock-names
+ - resets
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen2-sdhi
+ - renesas,rcar-gen3-sdhi
+ - renesas,rcar-gen4-sdhi
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 3
+ clock-names:
+ minItems: 1
+ uniqueItems: true
+ items:
+ - const: core
+ - enum: [ clkh, cd ]
+ - const: cd
+ else:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 2
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: cd
- if:
properties:
#include <dt-bindings/power/r8a7790-sysc.h>
sdhi0: mmc@ee100000 {
- compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
- reg = <0xee100000 0x328>;
- interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
- dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx", "tx", "rx";
- max-frequency = <195000000>;
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 314>;
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee100000 0x328>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <195000000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
};
sdhi1: mmc@ee120000 {
- compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
- reg = <0xee120000 0x328>;
- interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
- dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>;
- dma-names = "tx", "rx", "tx", "rx";
- max-frequency = <195000000>;
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 313>;
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee120000 0x328>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <195000000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
};
sdhi2: mmc@ee140000 {
- compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
- reg = <0xee140000 0x100>;
- interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
- dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx", "tx", "rx";
- max-frequency = <97500000>;
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 312>;
- };
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee140000 0x100>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ };
- sdhi3: mmc@ee160000 {
- compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
- reg = <0xee160000 0x100>;
- interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
- dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx", "tx", "rx";
- max-frequency = <97500000>;
- power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
- resets = <&cpg 311>;
+ sdhi3: mmc@ee160000 {
+ compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+ reg = <0xee160000 0x100>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
};
- qcom,ipq5424-sdhci
- qcom,ipq6018-sdhci
- qcom,ipq9574-sdhci
+ - qcom,milos-sdhci
- qcom,qcm2290-sdhci
- qcom,qcs404-sdhci
- qcom,qcs615-sdhci
+ - qcom,qcs8300-sdhci
- qcom,qdu1000-sdhci
- qcom,sar2130p-sdhci
- qcom,sc7180-sdhci
maxItems: 1
reg-names:
maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mrvl,pxav1-mmc
+ then:
+ properties:
+ pinctrl-names:
+ description:
+ Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
+ SDIO CMD and GPIO mode.
+ items:
+ - const: default
+ - const: state_cmd_gpio
+ pinctrl-0:
+ description:
+ Should contain default pinctrl.
+ pinctrl-1:
+ description:
+ Should switch CMD pin to GPIO mode as a high output.
properties:
compatible:
- const: io
- const: core
- pinctrl-names:
- description:
- Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
- SDIO CMD and GPIO mode.
- items:
- - const: default
- - const: state_cmd_gpio
-
- pinctrl-0:
- description:
- Should contain default pinctrl.
-
- pinctrl-1:
- description:
- Should switch CMD pin to GPIO mode as a high output.
-
mrvl,clk-delay-cycles:
description: Specify a number of cycles to delay for tuning.
$ref: /schemas/types.yaml#/definitions/uint32
- pattern: "^((((micron|spansion|st),)?\
(m25p(40|80|16|32|64|128)|\
n25q(32b|064|128a11|128a13|256a|512a|164k)))|\
- atmel,at25df(321a|641|081a)|\
+ atmel,at(25|26)df(321a|641|081a)|\
everspin,mr25h(10|40|128|256)|\
(mxicy|macronix),mx25l(4005a|1606e|6405d|8005|12805d|25635e)|\
(mxicy|macronix),mx25u(4033|4035)|\
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nxp,lpc1773-spifi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP SPI Flash Interface (SPIFI)
+
+description:
+ NXP SPIFI is a specialized SPI interface for serial Flash devices.
+ It supports one Flash device with 1-, 2- and 4-bits width in SPI
+ mode 0 or 3. The controller operates in either command or memory
+ mode. In memory mode the Flash is accessible from the CPU as
+ normal memory.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1773-spifi
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: spifi
+ - const: flash
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: spifi
+ - const: reg
+
+ resets:
+ maxItems: 1
+
+ spi-cpol:
+ enum: [0, 3]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ spi@40003000 {
+ compatible = "nxp,lpc1773-spifi";
+ reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+ reg-names = "spifi", "flash";
+ interrupts = <30>;
+ clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+ clock-names = "spifi", "reg";
+ resets = <&rgu 53>;
+ };
+
+++ /dev/null
-* NXP SPI Flash Interface (SPIFI)
-
-NXP SPIFI is a specialized SPI interface for serial Flash devices.
-It supports one Flash device with 1-, 2- and 4-bits width in SPI
-mode 0 or 3. The controller operates in either command or memory
-mode. In memory mode the Flash is accessible from the CPU as
-normal memory.
-
-Required properties:
- - compatible : Should be "nxp,lpc1773-spifi"
- - reg : the first contains the register location and length,
- the second contains the memory mapping address and length
- - reg-names: Should contain the reg names "spifi" and "flash"
- - interrupts : Should contain the interrupt for the device
- - clocks : The clocks needed by the SPIFI controller
- - clock-names : Should contain the clock names "spifi" and "reg"
-
-Optional properties:
- - resets : phandle + reset specifier
-
-The SPI Flash must be a child of the SPIFI node and must have a
-compatible property as specified in bindings/mtd/jedec,spi-nor.txt
-
-Optionally it can also contain the following properties.
- - spi-cpol : Controller only supports mode 0 and 3 so either
- both spi-cpol and spi-cpha should be present or
- none of them
- - spi-cpha : See above
- - spi-rx-bus-width : Used to select how many pins that are used
- for input on the controller
-
-See bindings/spi/spi-bus.txt for more information.
-
-Example:
-spifi: spifi@40003000 {
- compatible = "nxp,lpc1773-spifi";
- reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
- reg-names = "spifi", "flash";
- interrupts = <30>;
- clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
- clock-names = "spifi", "reg";
- resets = <&rgu 53>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-cpol;
- spi-cpha;
- spi-rx-bus-width = <4>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "data";
- reg = <0 0x200000>;
- };
- };
-};
-
#address-cells = <1>;
#size-cells = <0>;
nand@0 {
- reg = <0>;
+ reg = <0>;
};
};
title: Analog Devices ADIN1200/ADIN1300 PHY
maintainers:
- - Alexandru Tachici <alexandru.tachici@analog.com>
+ - Marcelo Schmitt <marcelo.schmitt@analog.com>
description: |
Bindings for Analog Devices Industrial Ethernet PHYs
title: ADI ADIN1110 MAC-PHY
maintainers:
- - Alexandru Tachici <alexandru.tachici@analog.com>
+ - Marcelo Schmitt <marcelo.schmitt@analog.com>
description: |
The ADIN1110 is a low power single port 10BASE-T1L MAC-
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,an7583-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN7583 Dedicated MDIO Controller
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+ Airoha AN7583 SoC have 3 different MDIO Controller.
+
+ One comes from the intergated Switch based on MT7530.
+
+ The other 2 (that this schema describe) live under the SCU
+ register supporting both C22 and C45 PHYs.
+
+$ref: mdio.yaml#
+
+properties:
+ compatible:
+ const: airoha,an7583-mdio
+
+ reg:
+ enum: [0xc8, 0xcc]
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clock-frequency:
+ default: 2500000
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ system-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-bus@c8 {
+ compatible = "airoha,an7583-mdio";
+ reg = <0xc8>;
+
+ clocks = <&scu>;
+ resets = <&scu>;
+ };
+ };
- items:
- enum:
- allwinner,sun20i-d1-emac
+ - allwinner,sun50i-a100-emac
- allwinner,sun50i-h6-emac
- allwinner,sun50i-h616-emac0
- allwinner,sun55i-a523-gmac0
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2025 Altera Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,gmii-to-sgmii-2.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera GMII to SGMII Converter
+
+maintainers:
+ - Matthew Gerlach <matthew.gerlach@altera.com>
+
+description:
+ This binding describes the Altera GMII to SGMII converter.
+
+properties:
+ compatible:
+ const: altr,gmii-to-sgmii-2.0
+
+ reg:
+ items:
+ - description: Registers for the emac splitter IP
+ - description: Registers for the GMII to SGMII converter.
+ - description: Registers for TSE control.
+
+ reg-names:
+ items:
+ - const: hps_emac_interface_splitter_avalon_slave
+ - const: gmii_to_sgmii_adapter_avalon_slave
+ - const: eth_tse_control_port
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ phy@ff000240 {
+ compatible = "altr,gmii-to-sgmii-2.0";
+ reg = <0xff000240 0x00000008>,
+ <0xff000200 0x00000040>,
+ <0xff000250 0x00000008>;
+ reg-names = "hps_emac_interface_splitter_avalon_slave",
+ "gmii_to_sgmii_adapter_avalon_slave",
+ "eth_tse_control_port";
+ };
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,socfpga-stmmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA SoC DWMAC controller
+
+maintainers:
+ - Matthew Gerlach <matthew.gerlach@altera.com>
+
+description:
+ This binding describes the Altera SOCFPGA SoC implementation of the
+ Synopsys DWMAC for the Cyclone5, Arria5, Stratix10, Agilex5 and Agilex7
+ families of chips.
+ # TODO: Determine how to handle the Arria10 reset-name, stmmaceth-ocp, that
+ # does not validate against net/snps,dwmac.yaml.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - altr,socfpga-stmmac
+ - altr,socfpga-stmmac-a10-s10
+ - altr,socfpga-stmmac-agilex5
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: altr,socfpga-stmmac
+ - const: snps,dwmac-3.70a
+ - const: snps,dwmac
+ - items:
+ - const: altr,socfpga-stmmac-a10-s10
+ - const: snps,dwmac-3.72a
+ - const: snps,dwmac
+ - items:
+ - const: altr,socfpga-stmmac-a10-s10
+ - const: snps,dwmac-3.74a
+ - const: snps,dwmac
+ - items:
+ - const: altr,socfpga-stmmac-agilex5
+ - const: snps,dwxgmac-2.10
+
+ clocks:
+ minItems: 1
+ items:
+ - description: GMAC main clock
+ - description:
+ PTP reference clock. This clock is used for programming the
+ Timestamp Addend Register. If not passed then the system
+ clock will be used and this is fine on some platforms.
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: stmmaceth
+ - const: ptp_ref
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ phy-mode:
+ enum:
+ - gmii
+ - mii
+ - rgmii
+ - rgmii-id
+ - rgmii-rxid
+ - rgmii-txid
+ - sgmii
+ - 1000base-x
+
+ rxc-skew-ps:
+ description: Skew control of RXC pad
+
+ rxd0-skew-ps:
+ description: Skew control of RX data 0 pad
+
+ rxd1-skew-ps:
+ description: Skew control of RX data 1 pad
+
+ rxd2-skew-ps:
+ description: Skew control of RX data 2 pad
+
+ rxd3-skew-ps:
+ description: Skew control of RX data 3 pad
+
+ rxdv-skew-ps:
+ description: Skew control of RX CTL pad
+
+ txc-skew-ps:
+ description: Skew control of TXC pad
+
+ txen-skew-ps:
+ description: Skew control of TXC pad
+
+ altr,emac-splitter:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Should be the phandle to the emac splitter soft IP node if DWMAC
+ controller is connected an emac splitter.
+
+ altr,f2h_ptp_ref_clk:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to Precision Time Protocol reference clock. This clock is
+ common to gmac instances and defaults to osc1.
+
+ altr,gmii-to-sgmii-converter:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Should be the phandle to the gmii to sgmii converter soft IP.
+
+ altr,sysmgr-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Should be the phandle to the system manager node that encompass
+ the glue register, the register offset, and the register shift.
+ On Cyclone5/Arria5, the register shift represents the PHY mode
+ bits, while on the Arria10/Stratix10/Agilex platforms, the
+ register shift represents bit for each emac to enable/disable
+ signals from the FPGA fabric to the EMAC modules.
+ items:
+ - items:
+ - description: phandle to the system manager node
+ - description: offset of the control register
+ - description: shift within the control register
+
+patternProperties:
+ "^mdio[0-9]$":
+ type: object
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - altr,sysmgr-syscon
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ethernet@ff700000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a",
+ "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+ reg = <0xff700000 0x2000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+ clocks = <&emac_0_clk>;
+ clock-names = "stmmaceth";
+ phy-mode = "sgmii";
+ };
+ };
This property depends on the module vendor's
configuration.
+ max-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 3000000
+ - 4000000
+ default: 3000000
+
firmware-name:
maxItems: 1
description:
The GPIO number of the NXP chipset used for BT_WAKE_OUT.
+ vcc-supply:
+ description:
+ phandle of the regulator that provides the supply voltage.
+
+ reset-gpios:
+ description:
+ Chip powerdown/reset signal (PDn).
+
required:
- compatible
bluetooth {
compatible = "nxp,88w8987-bt";
fw-init-baudrate = <3000000>;
+ max-speed = <4000000>;
firmware-name = "uartuart8987_bt_v0.bin";
device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
nxp,wakein-pin = /bits/ 8 <18>;
nxp,wakeout-pin = /bits/ 8 <19>;
+ vcc-supply = <&nxp_iw612_supply>;
+ reset-gpios = <&gpioctrl 2 GPIO_ACTIVE_LOW>;
local-bd-address = [66 55 44 33 22 11];
interrupt-parent = <&gpio>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
- items:
- enum:
- microchip,sam9x7-gem # Microchip SAM9X7 gigabit ethernet interface
+ - microchip,sama7d65-gem # Microchip SAMA7D65 gigabit ethernet interface
- const: microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface
reg:
power-domains:
maxItems: 1
+ cdns,refclk-ext:
+ type: boolean
+ description:
+ This selects if the REFCLK for RMII is provided by an external source.
+ For RGMII mode this selects if the 125MHz REF clock is provided by an external
+ source.
+
cdns,rx-watermark:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- brcm,bcm63268-switch
- const: brcm,bcm63xx-switch
+ brcm,gpio-ctrl:
+ description:
+ A phandle to the syscon node of the bcm63xx gpio controller
+ which contains phy control registers
+ $ref: /schemas/types.yaml#/definitions/phandle
+
required:
- compatible
- reg
See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
details for the regulator setup on these boards.
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ mediatek,pio:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle pointing to the mediatek pinctrl node.
+
mediatek,mcm:
type: boolean
description:
- reg
$defs:
+ builtin-dsa-port:
+ patternProperties:
+ "^(ethernet-)?ports$":
+ patternProperties:
+ "^(ethernet-)?port@[0-6]$":
+ if:
+ required: [ ethernet ]
+ then:
+ properties:
+ phy-mode:
+ const: internal
+
mt7530-dsa-port:
patternProperties:
"^(ethernet-)?ports$":
- airoha,en7581-switch
- airoha,an7583-switch
then:
- $ref: "#/$defs/mt7530-dsa-port"
+ $ref: "#/$defs/builtin-dsa-port"
properties:
gpio-controller: false
mediatek,mcm: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/micrel,ks8995.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Micrel KS8995 Family DSA Switches
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ The Micrel KS8995 DSA Switches are 100 Mbit switches that were produced in
+ the early-to-mid 2000s. The chip features a CPU port and four outgoing ports,
+ each with an internal PHY. The chip itself is managed over SPI, but all the
+ PHYs need to be accessed from an external MDIO channel.
+
+ Further, a fifth PHY is available and can be used separately from the switch
+ fabric, connected to an external MII interface name MII-P5. This is
+ unrelated from the CPU-facing port 5 which is used for DSA MII traffic.
+
+properties:
+ compatible:
+ enum:
+ - micrel,ks8995
+ - micrel,ksz8795
+ - micrel,ksz8864
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO to be used to reset the whole device
+ maxItems: 1
+
+allOf:
+ - $ref: dsa.yaml#/$defs/ethernet-ports
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ ethernet-port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ ethernet-port@4 {
+ reg = <4>;
+ ethernet = <&mac2>;
+ phy-mode = "mii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* The WAN port connected on MII-P5 */
+ ethernet-port@1000 {
+ reg = <0x00001000 0x1000>;
+ label = "wan";
+ phy-mode = "mii";
+ phy-handle = <&phy5>;
+ };
+
+ mac2: ethernet-port@2000 {
+ reg = <0x00002000 0x1000>;
+ phy-mode = "mii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* LAN PHYs 1-4 accessible over external MDIO */
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+ /* WAN PHY accessible over external MDIO */
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
# required and optional properties.
compatible:
enum:
+ - microchip,ksz8463
- microchip,ksz8765
- microchip,ksz8794
- microchip,ksz8795
# MAC.
- internal
- mii
+ - mii-lite
- gmii
- sgmii
- psgmii
title: Faraday Technology FTGMAC100 gigabit ethernet controller
-allOf:
- - $ref: ethernet-controller.yaml#
-
maintainers:
- Po-Yu Chuang <ratbert@faraday-tech.com>
- description: MAC IP clock
- description: RMII RCLK gate for AST2500/2600
+ resets:
+ maxItems: 1
+
clock-names:
minItems: 1
items:
- reg
- interrupts
+allOf:
+ - $ref: ethernet-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - aspeed,ast2600-mac
+ then:
+ properties:
+ resets: true
+ else:
+ properties:
+ resets: false
+
unevaluatedProperties: false
examples:
+++ /dev/null
-* AT86RF230 IEEE 802.15.4 *
-
-Required properties:
- - compatible: should be "atmel,at86rf230", "atmel,at86rf231",
- "atmel,at86rf233" or "atmel,at86rf212"
- - spi-max-frequency: maximal bus speed, should be set to 7500000 depends
- sync or async operation mode
- - reg: the chipselect index
- - interrupts: the interrupt generated by the device. Non high-level
- can occur deadlocks while handling isr.
-
-Optional properties:
- - reset-gpio: GPIO spec for the rstn pin
- - sleep-gpio: GPIO spec for the slp_tr pin
- - xtal-trim: u8 value for fine tuning the internal capacitance
- arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
-
-Example:
-
- at86rf231@0 {
- compatible = "atmel,at86rf231";
- spi-max-frequency = <7500000>;
- reg = <0>;
- interrupts = <19 4>;
- interrupt-parent = <&gpio3>;
- xtal-trim = /bits/ 8 <0x06>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ieee802154/atmel,at86rf233.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT86RF230 IEEE 802.15.4
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - atmel,at86rf212
+ - atmel,at86rf230
+ - atmel,at86rf231
+ - atmel,at86rf233
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpio:
+ maxItems: 1
+
+ sleep-gpio:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 7500000
+
+ xtal-trim:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ maximum: 0xf
+ description: |
+ Fine tuning the internal capacitance arrays of xtal pins:
+ 0 = +0 pF, 0xf = +4.5 pF
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ zigbee@0 {
+ compatible = "atmel,at86rf231";
+ reg = <0>;
+ spi-max-frequency = <7500000>;
+ interrupts = <19 4>;
+ interrupt-parent = <&gpio3>;
+ xtal-trim = /bits/ 8 <0x06>;
+ };
+ };
phy-handle: true
+ fixed-link: true
+
intel,npe-handle:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
+++ /dev/null
-* NXP LPC32xx SoC Ethernet Controller
-
-Required properties:
-- compatible: Should be "nxp,lpc-eth"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain ethernet controller interrupt
-
-Optional properties:
-- phy-mode: See ethernet.txt file in the same directory. If the property is
- absent, "rmii" is assumed.
-- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
-
-Optional subnodes:
-- mdio : specifies the mdio bus, used as a container for phy nodes according to
- phy.txt in the same directory
-
-
-Example:
-
- mac: ethernet@31060000 {
- compatible = "nxp,lpc-eth";
- reg = <0x31060000 0x1000>;
- interrupt-parent = <&mic>;
- interrupts = <29 0>;
-
- phy-mode = "rmii";
- use-iram;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,armada-370-neta.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370/XP/3700/AC5 Ethernet Controller (NETA)
+
+maintainers:
+ - Marcin Wojtas <marcin.s.wojtas@gmail.com>
+
+allOf:
+ - $ref: /schemas/net/ethernet-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-370-neta
+ - marvell,armada-xp-neta
+ - marvell,armada-3700-neta
+ - marvell,armada-ac5-neta
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: bus
+
+ phys:
+ maxItems: 1
+
+ tx-csum-limit:
+ description: Maximum MTU in bytes for Tx checksum offload; default is 1600 for
+ armada-370-neta and 9800 for others.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ buffer-manager:
+ description: Phandle to hardware buffer manager.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ bm,pool-long:
+ description: Pool ID for packets larger than the short threshold.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ bm,pool-short:
+ description: Pool ID for packets smaller than the long threshold.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@70000 {
+ compatible = "marvell,armada-370-neta";
+ reg = <0x70000 0x2500>;
+ interrupts = <8>;
+ clocks = <&gate_clk 4>;
+ tx-csum-limit = <9800>;
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,armada-380-neta-bm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 380/XP Buffer Manager (BM)
+
+maintainers:
+ - Marcin Wojtas <marcin.s.wojtas@gmail.com>
+
+description:
+ In order to see how to hook the BM to a given ethernet port, please refer to
+ Documentation/devicetree/bindings/net/marvell,armada-370-neta.yaml.
+
+properties:
+ compatible:
+ const: marvell,armada-380-neta-bm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ internal-mem:
+ description: Phandle to internal SRAM region
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+ "^pool[0-3],capacity$":
+ description:
+ size of external buffer pointers' ring maintained in DRAM for pool 0-3
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 128
+ maximum: 16352
+
+ "^pool[0-3],pkt-size$":
+ description:
+ maximum packet size for a short buffer pool entry (pool 0-3)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - internal-mem
+
+additionalProperties: false
+
+examples:
+ - |
+ bm@c8000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc8000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ pool2,capacity = <4096>;
+ pool1,pkt-size = <512>;
+ };
+++ /dev/null
-* Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA)
-
-Required properties:
-- compatible: could be one of the following:
- "marvell,armada-370-neta"
- "marvell,armada-xp-neta"
- "marvell,armada-3700-neta"
- "marvell,armada-ac5-neta"
-- reg: address and length of the register set for the device.
-- interrupts: interrupt for the device
-- phy: See ethernet.txt file in the same directory.
-- phy-mode: See ethernet.txt file in the same directory
-- clocks: List of clocks for this device. At least one clock is
- mandatory for the core clock. If several clocks are given, then the
- clock-names property must be used to identify them.
-
-Optional properties:
-- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
- Value is presented in bytes. If not used, by default 1600B is set for
- "marvell,armada-370-neta" and 9800B for others.
-- clock-names: List of names corresponding to clocks property; shall be
- "core" for core clock and "bus" for the optional bus clock.
-- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt
-
-Optional properties (valid only for Armada XP/38x):
-
-- buffer-manager: a phandle to a buffer manager node. Please refer to
- Documentation/devicetree/bindings/net/marvell-neta-bm.txt
-- bm,pool-long: ID of a pool, that will accept all packets of a size
- higher than 'short' pool's threshold (if set) and up to MTU value.
- Obligatory, when the port is supposed to use hardware
- buffer management.
-- bm,pool-short: ID of a pool, that will be used for accepting
- packets of a size lower than given threshold. If not set, the port
- will use a single 'long' pool for all packets, as defined above.
-
-Example:
-
-ethernet@70000 {
- compatible = "marvell,armada-370-neta";
- reg = <0x70000 0x2500>;
- interrupts = <8>;
- clocks = <&gate_clk 4>;
- tx-csum-limit = <9800>
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <0>;
- bm,pool-short = <1>;
-};
+++ /dev/null
-* Marvell Armada 380/XP Buffer Manager driver (BM)
-
-Required properties:
-
-- compatible: should be "marvell,armada-380-neta-bm".
-- reg: address and length of the register set for the device.
-- clocks: a pointer to the reference clock for this device.
-- internal-mem: a phandle to BM internal SRAM definition.
-
-Optional properties (port):
-
-- pool<0 : 3>,capacity: size of external buffer pointers' ring maintained
- in DRAM. Can be set for each pool (id 0 : 3) separately. The value has
- to be chosen between 128 and 16352 and it also has to be aligned to 32.
- Otherwise the driver would adjust a given number or choose default if
- not set.
-- pool<0 : 3>,pkt-size: maximum size of a packet accepted by a given buffer
- pointers' pool (id 0 : 3). It will be taken into consideration only when pool
- type is 'short'. For 'long' ones it would be overridden by port's MTU.
- If not set a driver will choose a default value.
-
-In order to see how to hook the BM to a given ethernet port, please
-refer to Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt.
-
-Example:
-
-- main node:
-
-bm: bm@c8000 {
- compatible = "marvell,armada-380-neta-bm";
- reg = <0xc8000 0xac>;
- clocks = <&gateclk 13>;
- internal-mem = <&bm_bppi>;
- pool2,capacity = <4096>;
- pool1,pkt-size = <512>;
-};
-
-- internal SRAM node:
-
-bm_bppi: bm-bppi {
- compatible = "mmio-sram";
- reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
- ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&gateclk 13>;
-};
interrupts:
minItems: 1
- maxItems: 4
+ maxItems: 8
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: fe0
+ - const: fe1
+ - const: fe2
+ - const: fe3
+ - const: pdma0
+ - const: pdma1
+ - const: pdma2
+ - const: pdma3
power-domains:
maxItems: 1
- const: gmac
- const: ppe
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to mmio SRAM
+
mediatek,ethsys:
$ref: /schemas/types.yaml#/definitions/phandle
description:
minItems: 3
maxItems: 3
+ interrupt-names:
+ minItems: 3
+ maxItems: 3
+
clocks:
minItems: 4
maxItems: 4
- const: gp1
- const: gp2
+ sram: false
+
mediatek,infracfg: false
mediatek,wed: false
interrupts:
maxItems: 1
+ interrupt-names:
+ maxItems: 1
+
clocks:
minItems: 2
maxItems: 2
- const: ethif
- const: fe
+ sram: false
+
mediatek,infracfg: false
mediatek,wed: false
minItems: 3
maxItems: 3
+ interrupt-names:
+ minItems: 3
+ maxItems: 3
+
clocks:
minItems: 11
maxItems: 11
- const: sgmii_ck
- const: eth2pll
+ sram: false
+
mediatek,infracfg: false
mediatek,sgmiisys:
minItems: 3
maxItems: 3
+ interrupt-names:
+ minItems: 3
+ maxItems: 3
+
clocks:
minItems: 17
maxItems: 17
- const: sgmii_ck
- const: eth2pll
+ sram: false
+
mediatek,sgmiisys:
minItems: 2
maxItems: 2
then:
properties:
interrupts:
- minItems: 4
+ minItems: 8
+
+ interrupt-names:
+ minItems: 8
clocks:
minItems: 15
then:
properties:
interrupts:
- minItems: 4
+ minItems: 8
+
+ interrupt-names:
+ minItems: 8
clocks:
minItems: 15
then:
properties:
interrupts:
- minItems: 4
+ minItems: 8
+
+ interrupt-names:
+ minItems: 8
clocks:
minItems: 24
- const: xgp3
patternProperties:
- "^mac@[0-1]$":
+ "^mac@[0-2]$":
type: object
unevaluatedProperties: false
allOf:
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clocks = <ðsys CLK_ETH_FE_EN>,
<ðsys CLK_ETH_GP2_EN>,
<ðsys CLK_ETH_GP1_EN>,
+++ /dev/null
-Micrel KS8995 SPI controlled Ethernet Switch families
-
-Required properties (according to spi-bus.txt):
-- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"
-
-Optional properties:
-- reset-gpios : phandle of gpio that will be used to reset chip during probe
-
-Example:
-
-spi-master {
- ...
- switch@0 {
- compatible = "micrel,ksz8795";
-
- reg = <0>;
- spi-max-frequency = <50000000>;
- reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
- };
-};
description: |
Regulator for supply voltage to VIN pin
+ ti,rx-gain-reduction-db:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specify an RX gain reduction to reduce antenna sensitivity with 5dB per
+ increment, with a maximum of 15dB. Supported values: [0, 5, 10, 15].
+
required:
- compatible
- interrupts
irq-status-read-quirk;
en2-rf-quirk;
clock-frequency = <27120000>;
+ ti,rx-gain-reduction-db = <15>;
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,lpc-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx SoC Ethernet Controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc-eth
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ use-iram:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@31060000 {
+ compatible = "nxp,lpc-eth";
+ reg = <0x31060000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <29 0>;
+ phy-mode = "rmii";
+ use-iram;
+ };
+++ /dev/null
-* NXP LPC1850 GMAC ethernet controller
-
-This device is a platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-Required properties:
- - compatible: Should contain "nxp,lpc1850-dwmac"
-
-Examples:
-
-mac: ethernet@40010000 {
- compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
- reg = <0x40010000 0x2000>;
- interrupts = <5>;
- interrupt-names = "macirq";
- clocks = <&ccu1 CLK_CPU_ETHERNET>;
- clock-names = "stmmaceth";
- resets = <&rgu 22>;
- reset-names = "stmmaceth";
-}
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,lpc1850-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 GMAC ethernet controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nxp,lpc1850-dwmac
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - nxp,lpc1850-dwmac
+ - const: snps,dwmac-3.611
+ - const: snps,dwmac
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: stmmaceth
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: macirq
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: stmmaceth
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ ethernet@40010000 {
+ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+ reg = <0x40010000 0x2000>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ clocks = <&ccu1 CLK_CPU_ETHERNET>;
+ clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
+ rx-fifo-depth = <256>;
+ tx-fifo-depth = <256>;
+ snps,pbl = <4>;
+ snps,force_thresh_dma_mode;
+ phy-mode = "rgmii-id";
+ };
reg:
maxItems: 1
+ vdd-supply:
+ description: Regulator that provides 3.3V VDD power supply.
+
+ vdda-supply:
+ description: Regulator that provides 3.3V VDDA power supply.
+
managers:
type: object
additionalProperties: false
"#size-cells":
const: 0
+ vmain-supply:
+ description: Regulator that provides 44-57V VMAIN power supply.
+
+ vaux5-supply:
+ description: Regulator that provides 5V VAUX5 power supply.
+
+ vaux3p3-supply:
+ description: Regulator that provides 3.3V VAUX3P3 power supply.
+
patternProperties:
'^port@[0-7]$':
type: object
#address-cells = <1>;
#size-cells = <0>;
- manager@0 {
+ manager0: manager@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
+ vmain-supply = <&pse1_supply>;
phys0: port@0 {
reg = <0>;
pairset-names = "alternative-a", "alternative-b";
pairsets = <&phys0>, <&phys1>;
polarity-supported = "MDI", "S";
- vpwr-supply = <&vpwr1>;
+ vpwr-supply = <&manager0>;
};
pse_pi1: pse-pi@1 {
reg = <1>;
pairset-names = "alternative-a";
pairsets = <&phys2>;
polarity-supported = "MDI";
- vpwr-supply = <&vpwr2>;
+ vpwr-supply = <&manager0>;
};
};
};
reg:
maxItems: 1
+ interrupts:
+ maxItems: 1
+
'#pse-cells':
const: 1
maxItems: 1
channels:
- description: each set of 8 ports can be assigned to one physical
- channels or two for PoE4. This parameter describes the configuration
- of the ports conversion matrix that establishes relationship between
- the logical ports and the physical channels.
+ description: |
+ Defines the 8 physical delivery channels on the controller that can
+ be referenced by PSE PIs through their "pairsets" property. The actual
+ port matrix mapping is created when PSE PIs reference these channels in
+ their pairsets. For 4-pair operation, two channels from the same group
+ (0-3 or 4-7) must be referenced by a single PSE PI.
type: object
additionalProperties: false
required:
- compatible
- reg
+ - interrupts
examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
i2c {
#address-cells = <1>;
#size-cells = <0>;
ethernet-pse@20 {
compatible = "ti,tps23881";
reg = <0x20>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpiog>;
channels {
#address-cells = <1>;
allOf:
- $ref: ethernet-phy.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ethernet-phy-id004d.d0c0
+
+ then:
+ properties:
+ reg:
+ const: 7 # This PHY is always at MDIO address 7 in the IPQ5018 SoC
+
+ resets:
+ items:
+ - description:
+ GE PHY MISC reset which triggers a reset across MDC, DSP, RX, and TX lines.
+
+ qcom,dac-preset-short-cable:
+ description:
+ Set if this phy is connected to another phy to adjust the values for
+ MDAC and EDAC to adjust amplitude, bias current settings, and error
+ detection and correction algorithm to accommodate for short cable length.
+ If not set, DAC values are not modified and it is assumed the MDI output pins
+ of this PHY are directly connected to an RJ45 connector.
+ type: boolean
properties:
+ compatible:
+ enum:
+ - ethernet-phy-id004d.d0c0
+
qca,clk-out-frequency:
description: Clock output frequency in Hertz.
$ref: /schemas/types.yaml#/definitions/uint32
};
};
};
+ - |
+ #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ge_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-id004d.d0c0";
+ reg = <7>;
+
+ resets = <&gcc GCC_GEPHY_MISC_ARES>;
+ };
+ };
+++ /dev/null
-* Qualcomm QCA7000
-
-The QCA7000 is a serial-to-powerline bridge with a host interface which could
-be configured either as SPI or UART slave. This configuration is done by
-the QCA7000 firmware.
-
-(a) Ethernet over SPI
-
-In order to use the QCA7000 as SPI device it must be defined as a child of a
-SPI master in the device tree.
-
-Required properties:
-- compatible : Should be "qca,qca7000"
-- reg : Should specify the SPI chip select
-- interrupts : The first cell should specify the index of the source
- interrupt and the second cell should specify the trigger
- type as rising edge
-- spi-cpha : Must be set
-- spi-cpol : Must be set
-
-Optional properties:
-- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at.
- Numbers smaller than 1000000 or greater than 16000000
- are invalid. Missing the property will set the SPI
- frequency to 8000000 Hertz.
-- qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode.
- In this mode the SPI master must toggle the chip select
- between each data word. In burst mode these gaps aren't
- necessary, which is faster. This setting depends on how
- the QCA7000 is setup via GPIO pin strapping. If the
- property is missing the driver defaults to burst mode.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-SPI Example:
-
-/* Freescale i.MX28 SPI master*/
-ssp2: spi@80014000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx28-spi";
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>;
-
- qca7000: ethernet@0 {
- compatible = "qca,qca7000";
- reg = <0x0>;
- interrupt-parent = <&gpio3>; /* GPIO Bank 3 */
- interrupts = <25 0x1>; /* Index: 25, rising edge */
- spi-cpha; /* SPI mode: CPHA=1 */
- spi-cpol; /* SPI mode: CPOL=1 */
- spi-max-frequency = <8000000>; /* freq: 8 MHz */
- local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
- };
-};
-
-(b) Ethernet over UART
-
-In order to use the QCA7000 as UART slave it must be defined as a child of a
-UART master in the device tree. It is possible to preconfigure the UART
-settings of the QCA7000 firmware, but it's not possible to change them during
-runtime.
-
-Required properties:
-- compatible : Should be "qca,qca7000"
-
-Optional properties:
-- local-mac-address : see ./ethernet.txt
-- current-speed : current baud rate of QCA7000 which defaults to 115200
- if absent, see also ../serial/serial.yaml
-
-UART Example:
-
-/* Freescale i.MX28 UART */
-auart0: serial@8006a000 {
- compatible = "fsl,imx28-auart", "fsl,imx23-auart";
- reg = <0x8006a000 0x2000>;
- pinctrl-names = "default";
- pinctrl-0 = <&auart0_2pins_a>;
-
- qca7000: ethernet {
- compatible = "qca,qca7000";
- local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
- current-speed = <38400>;
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,qca7000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCA7000
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ The QCA7000 is a serial-to-powerline bridge with a host interface which could
+ be configured either as SPI or UART slave. This configuration is done by
+ the QCA7000 firmware.
+
+ (a) Ethernet over SPI
+
+ In order to use the QCA7000 as SPI device it must be defined as a child of a
+ SPI master in the device tree.
+
+ (b) Ethernet over UART
+
+ In order to use the QCA7000 as UART slave it must be defined as a child of a
+ UART master in the device tree. It is possible to preconfigure the UART
+ settings of the QCA7000 firmware, but it's not possible to change them during
+ runtime
+
+properties:
+ compatible:
+ const: qca,qca7000
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ qca,legacy-mode:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set the SPI data transfer of the QCA7000 to legacy mode.
+ In this mode the SPI master must toggle the chip select
+ between each data word. In burst mode these gaps aren't
+ necessary, which is faster. This setting depends on how
+ the QCA7000 is setup via GPIO pin strapping. If the
+ property is missing the driver defaults to burst mode.
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+ - if:
+ required:
+ - reg
+
+ then:
+ properties:
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ default: 8000000
+ maximum: 16000000
+ minimum: 1000000
+
+ allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ else:
+ properties:
+ current-speed:
+ default: 115200
+
+ qca,legacy-mode: false
+
+ allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "qca,qca7000";
+ reg = <0x0>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <8000000>;
+ local-mac-address = [ a0 b0 c0 d0 e0 f0 ];
+ };
+ };
+
+ - |
+ serial {
+ ethernet {
+ compatible = "qca,qca7000";
+ local-mac-address = [ a0 b0 c0 d0 e0 f0 ];
+ current-speed = <38400>;
+ };
+ };
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/net/renesas,r9a09g057-gbeth.yaml#
+$id: http://devicetree.org/schemas/net/renesas,rzv2h-gbeth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GBETH glue layer for Renesas RZ/V2H(P) (and similar SoCs)
compatible:
contains:
enum:
+ - renesas,r9a09g047-gbeth
- renesas,r9a09g056-gbeth
- renesas,r9a09g057-gbeth
- renesas,rzv2h-gbeth
compatible:
items:
- enum:
+ - renesas,r9a09g047-gbeth # RZ/G3E
- renesas,r9a09g056-gbeth # RZ/V2N
- renesas,r9a09g057-gbeth # RZ/V2H(P)
- const: renesas,rzv2h-gbeth
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwmac-4.20a
+ - snps,dwmac-5.00a
- snps,dwmac-5.10a
- snps,dwmac-5.20
- snps,dwmac-5.30a
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwmac-4.20a
+ - snps,dwmac-5.00a
- snps,dwmac-5.10a
- snps,dwmac-5.20
- snps,dwmac-5.30a
- snps,dwxgmac
- snps,dwxgmac-2.10
+ - sophgo,sg2042-dwmac
- sophgo,sg2044-dwmac
- starfive,jh7100-dwmac
- starfive,jh7110-dwmac
- snps,dwmac-4.00
- snps,dwmac-4.10a
- snps,dwmac-4.20a
+ - snps,dwmac-5.00a
- snps,dwmac-5.10a
- snps,dwmac-5.20
- snps,dwmac-5.30a
+++ /dev/null
-Altera SOCFPGA SoC DWMAC controller
-
-This is a variant of the dwmac/stmmac driver an inherits all descriptions
-present in Documentation/devicetree/bindings/net/stmmac.txt.
-
-The device node has additional properties:
-
-Required properties:
- - compatible : For Cyclone5/Arria5 SoCs it should contain
- "altr,socfpga-stmmac". For Arria10/Agilex/Stratix10 SoCs
- "altr,socfpga-stmmac-a10-s10".
- Along with "snps,dwmac" and any applicable more detailed
- designware version numbers documented in stmmac.txt
- - altr,sysmgr-syscon : Should be the phandle to the system manager node that
- encompasses the glue register, the register offset, and the register shift.
- On Cyclone5/Arria5, the register shift represents the PHY mode bits, while
- on the Arria10/Stratix10/Agilex platforms, the register shift represents
- bit for each emac to enable/disable signals from the FPGA fabric to the
- EMAC modules.
- - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
- for ptp ref clk. This affects all emacs as the clock is common.
-
-Optional properties:
-altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
- DWMAC controller is connected emac splitter.
-phy-mode: The phy mode the ethernet operates in
-altr,sgmii-to-sgmii-converter: phandle to the TSE SGMII converter
-
-This device node has additional phandle dependency, the sgmii converter:
-
-Required properties:
- - compatible : Should be altr,gmii-to-sgmii-2.0
- - reg-names : Should be "eth_tse_control_port"
-
-Example:
-
-gmii_to_sgmii_converter: phy@100000240 {
- compatible = "altr,gmii-to-sgmii-2.0";
- reg = <0x00000001 0x00000240 0x00000008>,
- <0x00000001 0x00000200 0x00000040>;
- reg-names = "eth_tse_control_port";
- clocks = <&sgmii_1_clk_0 &emac1 1 &sgmii_clk_125 &sgmii_clk_125>;
- clock-names = "tse_pcs_ref_clk_clock_connection", "tse_rx_cdr_refclk";
-};
-
-gmac0: ethernet@ff700000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
- altr,sysmgr-syscon = <&sysmgr 0x60 0>;
- reg = <0xff700000 0x2000>;
- interrupts = <0 115 4>;
- interrupt-names = "macirq";
- mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
- clocks = <&emac_0_clk>;
- clock-names = "stmmaceth";
- phy-mode = "sgmii";
- altr,gmii-to-sgmii-converter = <&gmii_to_sgmii_converter>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/sophgo,cv1800b-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800B DWMAC glue layer
+
+maintainers:
+ - Inochi Amaoto <inochiama@gmail.com>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - sophgo,cv1800b-dwmac
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: sophgo,cv1800b-dwmac
+ - const: snps,dwmac-3.70a
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: GMAC main clock
+ - description: PTP clock
+
+ clock-names:
+ items:
+ - const: stmmaceth
+ - const: ptp_ref
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: stmmaceth
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ ethernet@4070000 {
+ compatible = "sophgo,cv1800b-dwmac", "snps,dwmac-3.70a";
+ reg = <0x04070000 0x10000>;
+ clocks = <&clk 35>, <&clk 36>;
+ clock-names = "stmmaceth", "ptp_ref";
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "internal";
+ resets = <&rst 12>;
+ reset-names = "stmmaceth";
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,multicast-filter-bins = <0>;
+ snps,perfect-filter-entries = <1>;
+ snps,aal;
+ snps,txpbl = <8>;
+ snps,rxpbl = <8>;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <16 8 4 0 0 0 0>;
+ snps,rd_osr_lmt = <2>;
+ snps,wr_osr_lmt = <1>;
+ };
+ };
contains:
enum:
- sophgo,sg2044-dwmac
+ - sophgo,sg2042-dwmac
required:
- compatible
properties:
compatible:
- items:
- - const: sophgo,sg2044-dwmac
- - const: snps,dwmac-5.30a
+ oneOf:
+ - items:
+ - const: sophgo,sg2042-dwmac
+ - const: snps,dwmac-5.00a
+ - items:
+ - const: sophgo,sg2044-dwmac
+ - const: snps,dwmac-5.30a
reg:
maxItems: 1
items:
- description: GMAC main clock
- description: Peripheral registers interface clock
+ - description: APB glue registers interface clock
clock-names:
items:
- const: stmmaceth
- const: pclk
+ - const: apb
interrupts:
items:
compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
reg = <0xe7070000 0x2000>, <0xec003000 0x1000>;
reg-names = "dwmac", "apb";
- clocks = <&clk 1>, <&clk 2>;
- clock-names = "stmmaceth", "pclk";
+ clocks = <&clk 1>, <&clk 2>, <&clk 3>;
+ clock-names = "stmmaceth", "pclk", "apb";
interrupts = <66>;
interrupt-names = "macirq";
phy-mode = "rgmii-id";
ti,syscon-efuse = <&mcu_conf 0x200>;
phys = <&phy_gmii_sel 1>;
- phy-mode = "rgmii-rxid";
+ phy-mode = "rgmii-id";
phy-handle = <&phy0>;
};
};
description: |
This node provides properties for configuring the ath9k wireless device.
The node is expected to be specified as a child node of the PCI controller
- to which the wireless chip is connected.
+ or AHB bus to which the wireless chip is connected.
allOf:
- $ref: ieee80211.yaml#
- pci168c,0034 # AR9462
- pci168c,0036 # AR9565
- pci168c,0037 # AR1111 and AR9485
+ - qca,ar9130-wifi
+ - qca,ar9330-wifi
+ - qca,ar9340-wifi
+ - qca,qca9530-wifi
+ - qca,qca9550-wifi
+ - qca,qca9560-wifi
reg:
maxItems: 1
nvmem-cell-names = "mac-address", "calibration";
};
};
+ - |
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ wifi@180c0000 {
+ compatible = "qca,ar9130-wifi";
+ reg = <0x180c0000 0x230000>;
+ interrupts = <2>;
+ };
+ };
string to uniquely identify variant of the calibration data for designs
with colliding bus and device ids
+ firmware-name:
+ maxItems: 1
+ description:
+ If present, a board or platform specific string used to lookup
+ usecase-specific firmware files for the device.
+
vddrfacmn-supply:
description: VDD_RFA_CMN supply regulator handle
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ralink,rt2880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT2880 wireless device
+
+maintainers:
+ - Stanislaw Gruszka <stf_xl@wp.pl>
+
+description: |
+ This node provides properties for configuring RT2880 SOC wifi devices.
+ The node is expected to be specified as a root node of the device.
+
+allOf:
+ - $ref: ieee80211.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ralink,rt2880-wifi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ wifi@110180000 {
+ compatible = "ralink,rt2880-wifi";
+ reg = <0x10180000 0x40000>;
+ clocks = <&sysc 16>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+ };
- enum:
- allwinner,sun50i-a100-sid
- allwinner,sun50i-h616-sid
+ - allwinner,sun55i-a523-sid
- const: allwinner,sun50i-a64-sid
- const: allwinner,sun50i-h5-sid
- const: allwinner,sun50i-h6-sid
};
temperature_calib: calib@1f4 {
- reg = <0x1f4 0x4>;
+ reg = <0x1f4 0x4>;
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,vf610-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Freescale Vybrid
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+allOf:
+ - $ref: nvmem.yaml#
+ - $ref: nvmem-deprecated-cells.yaml
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,vf610-ocotp
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: ipg clock we associate with the OCOTP peripheral
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/vf610-clock.h>
+
+ ocotp@400a5000 {
+ compatible = "fsl,vf610-ocotp", "syscon";
+ reg = <0x400a5000 0xcf0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&clks VF610_CLK_OCOTP>;
+ };
const: 1
patternProperties:
- "@[a-f0-9]+$":
+ "@[a-f0-9]+(,[0-7])?$":
type: object
$ref: fixed-cell.yaml
unevaluatedProperties: false
+++ /dev/null
-* NXP LPC18xx EEPROM memory NVMEM driver
-
-Required properties:
- - compatible: Should be "nxp,lpc1857-eeprom"
- - reg: Must contain an entry with the physical base address and length
- for each entry in reg-names.
- - reg-names: Must include the following entries.
- - reg: EEPROM registers.
- - mem: EEPROM address space.
- - clocks: Must contain an entry for each entry in clock-names.
- - clock-names: Must include the following entries.
- - eeprom: EEPROM operating clock.
- - resets: Should contain a reference to the reset controller asserting
- the EEPROM in reset.
- - interrupts: Should contain EEPROM interrupt.
-
-Example:
-
- eeprom: eeprom@4000e000 {
- compatible = "nxp,lpc1857-eeprom";
- reg = <0x4000e000 0x1000>,
- <0x20040000 0x4000>;
- reg-names = "reg", "mem";
- clocks = <&ccu1 CLK_CPU_EEPROM>;
- clock-names = "eeprom";
- resets = <&rgu 27>;
- interrupts = <4>;
- };
compatible:
oneOf:
+ - items:
+ - const: mediatek,mt8188-efuse
+ - const: mediatek,mt8186-efuse
+ - const: mediatek,mt8186-efuse
+
+ - items:
+ - enum:
+ - mediatek,mt8186-efuse
+ - mediatek,mt8188-efuse
+ - const: mediatek,efuse
+ deprecated: true
+ description: Some compatibles also imply a decoding scheme for the
+ "gpu-speedbin" cell, and thus are not backward compatible to the
+ generic "mediatek,efuse" compatible.
+
- items:
- enum:
- mediatek,mt7622-efuse
- mediatek,mt7988-efuse
- mediatek,mt8173-efuse
- mediatek,mt8183-efuse
- - mediatek,mt8186-efuse
- - mediatek,mt8188-efuse
- mediatek,mt8192-efuse
- mediatek,mt8195-efuse
- mediatek,mt8516-efuse
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nxp,lpc1857-eeprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx EEPROM memory
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1857-eeprom
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: reg
+ - const: mem
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: eeprom
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ eeprom@4000e000 {
+ compatible = "nxp,lpc1857-eeprom";
+ reg = <0x4000e000 0x1000>,
+ <0x20040000 0x4000>;
+ reg-names = "reg", "mem";
+ clocks = <&ccu1 CLK_CPU_EEPROM>;
+ clock-names = "eeprom";
+ resets = <&rgu 27>;
+ interrupts = <4>;
+ };
+++ /dev/null
-On-Chip OTP Memory for Freescale Vybrid
-
-Required Properties:
- compatible:
- - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
- #address-cells : Should be 1
- #size-cells : Should be 1
- reg : Address and length of OTP controller and fuse map registers
- clocks : ipg clock we associate with the OCOTP peripheral
-
-Example for Vybrid VF5xx/VF6xx:
-
- ocotp: ocotp@400a5000 {
- compatible = "fsl,vf610-ocotp", "syscon";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x400a5000 0xCF0>;
- clocks = <&clks VF610_CLK_OCOTP>;
- };
const: operating-points-v2-adreno
patternProperties:
- '^opp-[0-9]+$':
+ '^opp(-[0-9]+){1,2}$':
type: object
additionalProperties: false
+++ /dev/null
-* Freescale 83xx and 512x PCI bridges
-
-Freescale 83xx and 512x SOCs include the same PCI bridge core.
-
-83xx/512x specific notes:
-- reg: should contain two address length tuples
- The first is for the internal PCI bridge registers
- The second is for the PCI config space access registers
-
-Example (MPC8313ERDB)
- pci0: pci@e0008500 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0E -mini PCI */
- 0x7000 0x0 0x0 0x1 &ipic 18 0x8
- 0x7000 0x0 0x0 0x2 &ipic 18 0x8
- 0x7000 0x0 0x0 0x3 &ipic 18 0x8
- 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
- /* IDSEL 0x0F - PCI slot */
- 0x7800 0x0 0x0 0x1 &ipic 17 0x8
- 0x7800 0x0 0x0 0x2 &ipic 18 0x8
- 0x7800 0x0 0x0 0x3 &ipic 17 0x8
- 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
- interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008500 0x100 /* internal registers */
- 0xe0008300 0x8>; /* config space access registers */
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
+++ /dev/null
-Aardvark PCIe controller
-
-This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
-
-The Device Tree node describing an Aardvark PCIe controller must
-contain the following properties:
-
- - compatible: Should be "marvell,armada-3700-pcie"
- - reg: range of registers for the PCIe controller
- - interrupts: the interrupt line of the PCIe controller
- - #address-cells: set to <3>
- - #size-cells: set to <2>
- - device_type: set to "pci"
- - ranges: ranges for the PCI memory and I/O regions
- - #interrupt-cells: set to <1>
- - msi-controller: indicates that the PCIe controller can itself
- handle MSI interrupts
- - msi-parent: pointer to the MSI controller to be used
- - interrupt-map-mask and interrupt-map: standard PCI properties to
- define the mapping of the PCIe interface to interrupt numbers.
- - bus-range: PCI bus numbers covered
- - phys: the PCIe PHY handle
- - max-link-speed: see pci.txt
- - reset-gpios: see pci.txt
-
-In addition, the Device Tree describing an Aardvark PCIe controller
-must include a sub-node that describes the legacy interrupt controller
-built into the PCIe controller. This sub-node must have the following
-properties:
-
- - interrupt-controller
- - #interrupt-cells: set to <1>
-
-Example:
-
- pcie0: pcie@d0070000 {
- compatible = "marvell,armada-3700-pcie";
- device_type = "pci";
- reg = <0 0xd0070000 0 0x20000>;
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x00 0xff>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <1>;
- msi-controller;
- msi-parent = <&pcie0>;
- ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */
- 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc 0>,
- <0 0 0 2 &pcie_intc 1>,
- <0 0 0 3 &pcie_intc 2>,
- <0 0 0 4 &pcie_intc 3>;
- phys = <&comphy1 0>;
- pcie_intc: interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amazon,al-alpine-v3-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon Annapurna Labs Alpine v3 PCIe Host Bridge
+
+maintainers:
+ - Jonathan Chocron <jonnyc@amazon.com>
+
+description:
+ Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys
+ DesignWare PCI controller.
+
+allOf:
+ - $ref: snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amazon,al-alpine-v2-pcie
+ - amazon,al-alpine-v3-pcie
+
+ reg:
+ items:
+ - description: PCIe ECAM space
+ - description: AL proprietary registers
+ - description: Designware PCIe registers
+
+ reg-names:
+ items:
+ - const: config
+ - const: controller
+ - const: dbi
+
+ interrupts:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@fb600000 {
+ compatible = "amazon,al-alpine-v3-pcie";
+ reg = <0x0 0xfb600000 0x0 0x00100000
+ 0x0 0xfd800000 0x0 0x00010000
+ 0x0 0xfd810000 0x0 0x00001000>;
+ reg-names = "config", "controller", "dbi";
+ bus-range = <0 255>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0x00 0 0 7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+ ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/apm,xgene-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AppliedMicro X-Gene PCIe interface
+
+maintainers:
+ - Toan Le <toan@os.amperecomputing.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: apm,xgene-storm-pcie
+ - const: apm,xgene-pcie
+ - items:
+ - const: apm,xgene-pcie
+
+ reg:
+ items:
+ - description: Controller configuration registers
+ - description: PCI configuration space registers
+
+ reg-names:
+ items:
+ - const: csr
+ - const: cfg
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pcie
+
+ dma-coherent: true
+
+ msi-parent:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - '#interrupt-cells'
+ - interrupt-map-mask
+ - interrupt-map
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1f2b0000 {
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x00 0x1f2b0000 0x0 0x00010000>, /* Controller registers */
+ <0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000>, /* io */
+ <0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000>,
+ <0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1>,
+ <0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1>,
+ <0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1>,
+ <0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ };
+ };
+++ /dev/null
-* Axis ARTPEC-6 PCIe interface
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml.
-
-Required properties:
-- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
- "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
- "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode;
- "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode;
-- reg: base addresses and lengths of the PCIe controller (DBI),
- the PHY controller, and configuration address space.
-- reg-names: Must include the following entries:
- - "dbi"
- - "phy"
- - "config"
-- interrupts: A list of interrupt outputs of the controller. Must contain an
- entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
- - "msi": The interrupt that is asserted when an MSI is received
-- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
- used to enable and control the Synopsys IP.
-
-Example:
-
- pcie@f8050000 {
- compatible = "axis,artpec6-pcie", "snps,dw-pcie";
- reg = <0xf8050000 0x2000
- 0xf8040000 0x1000
- 0xc0000000 0x2000>;
- reg-names = "dbi", "phy", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- /* downstream I/O */
- ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
- /* non-prefetchable memory */
- 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
- num-lanes = <2>;
- bus-range = <0x00 0xff>;
- interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
- axis,syscon-pcie = <&syscon>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Axis AB
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/axis,artpec6-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axis ARTPEC-6 PCIe host controller
+
+maintainers:
+ - Jesper Nilsson <jesper.nilsson@axis.com>
+
+description:
+ This PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - axis,artpec6-pcie
+ - axis,artpec6-pcie-ep
+ - axis,artpec7-pcie
+ - axis,artpec7-pcie-ep
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - axis,artpec6-pcie
+ - axis,artpec6-pcie-ep
+ - axis,artpec7-pcie
+ - axis,artpec7-pcie-ep
+ - const: snps,dw-pcie
+
+ reg:
+ minItems: 3
+ maxItems: 4
+
+ reg-names:
+ minItems: 3
+ maxItems: 4
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: msi
+
+ axis,syscon-pcie:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ System controller phandle used to enable and control the Synopsys IP.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - axis,syscon-pcie
+
+oneOf:
+ - $ref: snps,dw-pcie.yaml#
+ properties:
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: phy
+ - const: config
+
+ - $ref: snps,dw-pcie-ep.yaml#
+ properties:
+ reg:
+ minItems: 4
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: dbi2
+ - const: phy
+ - const: addr_space
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pcie@f8050000 {
+ compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+ device_type = "pci";
+ reg = <0xf8050000 0x2000
+ 0xf8040000 0x1000
+ 0xc0000000 0x2000>;
+ reg-names = "dbi", "phy", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0xc0002000 0 0x00010000>,
+ <0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+ num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ axis,syscon-pcie = <&syscon>;
+ };
- const: bridge
- const: swinit
+ num-lanes:
+ default: 1
+ maximum: 4
+
required:
- compatible
- reg
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/marvell,armada-3700-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3700 (Aardvark) PCIe Controller
+
+maintainers:
+ - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+ - Pali Rohár <pali@kernel.org>
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+properties:
+ compatible:
+ const: marvell,armada-3700-pcie
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ msi-controller: true
+
+ msi-parent:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ reset-gpios:
+ description: PCIe reset GPIO signals.
+
+ interrupt-controller:
+ type: object
+ additionalProperties: false
+
+ properties:
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ required:
+ - interrupt-controller
+ - '#interrupt-cells'
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@d0070000 {
+ compatible = "marvell,armada-3700-pcie";
+ device_type = "pci";
+ reg = <0 0xd0070000 0 0x20000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ msi-controller;
+ msi-parent = <&pcie0>;
+ ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000>,
+ <0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ phys = <&comphy1 0>;
+ max-link-speed = <2>;
+ reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
max-link-speed:
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 1, 2, 3, 4 ]
+ enum: [ 1, 2, 3, 4, 5, 6 ]
msi-map:
description: |
+++ /dev/null
-* Amazon Annapurna Labs PCIe host bridge
-
-Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
-PCI core. It inherits common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Properties of the host controller node that differ from it are:
-
-- compatible:
- Usage: required
- Value type: <stringlist>
- Definition: Value should contain
- - "amazon,al-alpine-v2-pcie" for alpine_v2
- - "amazon,al-alpine-v3-pcie" for alpine_v3
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Register ranges as listed in the reg-names property
-
-- reg-names:
- Usage: required
- Value type: <stringlist>
- Definition: Must include the following entries
- - "config" PCIe ECAM space
- - "controller" AL proprietary registers
- - "dbi" Designware PCIe registers
-
-Example:
-
- pcie-external0: pcie@fb600000 {
- compatible = "amazon,al-alpine-v3-pcie";
- reg = <0x0 0xfb600000 0x0 0x00100000
- 0x0 0xfd800000 0x0 0x00010000
- 0x0 0xfd810000 0x0 0x00001000>;
- reg-names = "config", "controller", "dbi";
- bus-range = <0 255>;
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0x00 0 0 7>;
- interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
- ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
- };
phys:
maxItems: 1
+ deprecated: true
+ description:
+ This property is deprecated, instead of referencing this property from
+ the host bridge node, use the property from the PCIe root port node.
phy-names:
items:
- const: pciephy
+ deprecated: true
+ description:
+ Phandle to the register map node. This property is deprecated, and not
+ required to add in the root port also, as the root port has only one phy.
power-domains:
maxItems: 1
maxItems: 12
perst-gpios:
- description: GPIO controlled connection to PERST# signal
+ description: GPIO controlled connection to PERST# signal. This property is
+ deprecated, instead of referencing this property from the host bridge node,
+ use the reset-gpios property from the root port node.
maxItems: 1
+ deprecated: true
wake-gpios:
- description: GPIO controlled connection to WAKE# signal
+ description: GPIO controlled connection to WAKE# signal. This property is
+ deprecated, instead of referencing this property from the host bridge node,
+ use the property from the PCIe root port node.
maxItems: 1
+ deprecated: true
vddpe-3v3-supply:
description: PCIe endpoint power supply
opp-table:
type: object
+patternProperties:
+ "^pcie@":
+ type: object
+ $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ unevaluatedProperties: false
+
required:
- reg
- reg-names
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8255p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8255p based firmware managed and ECAM compliant PCIe Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SA8255p SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP which is managed by firmware, and configured in ECAM mode.
+
+properties:
+ compatible:
+ const: qcom,pcie-sa8255p
+
+ reg:
+ description:
+ The base address and size of the ECAM area for accessing PCI
+ Configuration Space, as accessed from the parent bus. The base
+ address corresponds to the first bus in the "bus-range" property. If
+ no "bus-range" is specified, this will be bus 0 (the default).
+ maxItems: 1
+
+ ranges:
+ description:
+ As described in IEEE Std 1275-1994, but must provide at least a
+ definition of non-prefetchable memory. One or both of prefetchable Memory
+ may also be provided.
+ minItems: 1
+ maxItems: 2
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ power-domains:
+ maxItems: 1
+
+ dma-coherent: true
+ iommu-map: true
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - power-domains
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pci@1c00000 {
+ compatible = "qcom,pcie-sa8255p";
+ reg = <0x4 0x00000000 0 0x10000000>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>,
+ <0x43000000 0x4 0x10100000 0x4 0x10100000 0x0 0x40000000>;
+ bus-range = <0x00 0xff>;
+ dma-coherent;
+ linux,pci-domain = <0>;
+ power-domains = <&scmi5_pd 0>;
+ iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+ <0x100 &pcie_smmu 0x0001 0x1>;
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
+ };
properties:
compatible:
- const: qcom,pcie-sa8775p
+ oneOf:
+ - const: qcom,pcie-sa8775p
+ - items:
+ - enum:
+ - qcom,pcie-qcs8300
+ - const: qcom,pcie-sa8775p
reg:
minItems: 6
- const: global
resets:
- maxItems: 1
+ items:
+ - description: PCIe controller reset
+ - description: PCIe link down reset
reset-names:
items:
- const: pci
+ - const: link_down
required:
- interconnects
power-domains = <&gcc PCIE_0_GDSC>;
- resets = <&gcc GCC_PCIE_0_BCR>;
- reset-names = "pci";
+ resets = <&gcc GCC_PCIE_0_BCR>,
+ <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
<0x100 &apps_smmu 0x1c81 0x1>;
- phys = <&pcie1_phy>;
- phy-names = "pciephy";
-
pinctrl-names = "default";
pinctrl-0 = <&pcie1_clkreq_n>;
resets = <&gcc GCC_PCIE_1_BCR>;
reset-names = "pci";
- perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&pp3300_ssd>;
+ pcie1_port0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ phys = <&pcie1_phy>;
+
+ reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ };
};
};
- const: mhi # MHI registers
clocks:
- minItems: 8
- maxItems: 8
+ minItems: 6
+ maxItems: 6
clock-names:
items:
- const: bus_master # Master AXI clock
- const: bus_slave # Slave AXI clock
- const: slave_q2a # Slave Q2A clock
- - const: ref # REFERENCE clock
- - const: tbu # PCIe TBU clock
interrupts:
minItems: 8
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "ref",
- "tbu";
+ "slave_q2a";
dma-coherent;
properties:
compatible:
- const: qcom,pcie-sm8150
+ oneOf:
+ - const: qcom,pcie-sm8150
+ - items:
+ - enum:
+ - qcom,pcie-qcs615
+ - const: qcom,pcie-sm8150
reg:
minItems: 5
- const: mhi # MHI registers
clocks:
- minItems: 8
- maxItems: 8
+ minItems: 6
+ maxItems: 6
clock-names:
items:
- const: bus_master # Master AXI clock
- const: bus_slave # Slave AXI clock
- const: slave_q2a # Slave Q2A clock
- - const: tbu # PCIe TBU clock
- - const: ref # REFERENCE clock
interrupts:
minItems: 8
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "tbu",
- "ref";
+ "slave_q2a";
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- description: See native 'dbi' CSR region for details.
enum: [ ctrl ]
- description: See native 'elbi/app' CSR region for details.
- enum: [ apb, mgmt, link, ulreg, appl ]
+ enum: [ apb, mgmt, link, ulreg, appl, controller ]
- description: See native 'atu' CSR region for details.
enum: [ atu_dma ]
- description: Syscon-related CSR regions.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sophgo,sg2044-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe Root Complex controller on Sophgo SoCs
+
+maintainers:
+ - Inochi Amaoto <inochiama@gmail.com>
+
+description:
+ SG2044 SoC PCIe Root Complex controller is based on the Synopsys DesignWare
+ PCIe IP and thus inherits all the common properties defined in
+ snps,dw-pcie.yaml.
+
+allOf:
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ const: sophgo,sg2044-pcie
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers
+ - description: iATU registers
+ - description: Config registers
+ - description: Sophgo designed configuration registers
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: atu
+ - const: config
+ - const: app
+
+ clocks:
+ items:
+ - description: core clk
+
+ clock-names:
+ items:
+ - const: core
+
+ interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller: true
+
+ interrupts:
+ items:
+ - description: combined legacy interrupt
+
+ required:
+ - "#address-cells"
+ - "#interrupt-cells"
+ - interrupt-controller
+ - interrupts
+
+ additionalProperties: false
+
+ msi-parent: true
+
+ ranges:
+ maxItems: 5
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@6c00400000 {
+ compatible = "sophgo,sg2044-pcie";
+ reg = <0x6c 0x00400000 0x0 0x00001000>,
+ <0x6c 0x00700000 0x0 0x00004000>,
+ <0x40 0x00000000 0x0 0x00001000>,
+ <0x6c 0x00780c00 0x0 0x00000400>;
+ reg-names = "dbi", "atu", "config", "app";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ clocks = <&clk 0>;
+ clock-names = "core";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ msi-parent = <&msi>;
+ ranges = <0x01000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00200000>,
+ <0x42000000 0x0 0x00000000 0x0 0x00000000 0x0 0x04000000>,
+ <0x02000000 0x0 0x04000000 0x0 0x04000000 0x0 0x04000000>,
+ <0x43000000 0x42 0x00000000 0x42 0x00000000 0x2 0x00000000>,
+ <0x03000000 0x41 0x00000000 0x41 0x00000000 0x1 0x00000000>;
+
+ interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+...
+++ /dev/null
-SPEAr13XX PCIe DT detail:
-================================
-
-SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY
-controller.
-
-Required properties:
-- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
-- phys : phandle to PHY node associated with PCIe controller
-- phy-names : must be "pcie-phy"
-- All other definitions as per generic PCI bindings
-
- Optional properties:
-- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,spear1340-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST SPEAr1340 PCIe controller
+
+maintainers:
+ - Pratyush Anand <pratyush.anand@gmail.com>
+
+description:
+ SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY
+ controller.
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: st,spear1340-pcie
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: st,spear1340-pcie
+ - const: snps,dw-pcie
+
+ phys:
+ maxItems: 1
+
+ st,pcie-is-gen1:
+ type: boolean
+ description: Indicates forced gen1 initialization is needed.
+
+required:
+ - compatible
+ - phys
+ - phy-names
+
+allOf:
+ - $ref: snps,dw-pcie.yaml#
+
+unevaluatedProperties: false
#size-cells = <2>;
pcie0_ep: pcie-ep@d000000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02900000 0x00 0x1000>,
- <0x00 0x02907000 0x00 0x400>,
- <0x00 0x0d000000 0x00 0x00800000>,
- <0x00 0x10000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 239 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- dma-coherent;
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- };
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ dma-coherent;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ };
};
+++ /dev/null
-* AppliedMicro X-Gene v1 PCIe MSI controller
-
-Required properties:
-
-- compatible: should be "apm,xgene1-msi" to identify
- X-Gene v1 PCIe MSI controller block.
-- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node
-- reg: physical base address (0x79000000) and length (0x900000) for controller
- registers. These registers include the MSI termination address and data
- registers as well as the MSI interrupt status registers.
-- reg-names: not required
-- interrupts: A list of 16 interrupt outputs of the controller, starting from
- interrupt number 0x10 to 0x1f.
-- interrupt-names: not required
-
-Each PCIe node needs to have property msi-parent that points to an MSI
-controller node
-
-Examples:
-
-SoC DTSI:
-
- + MSI node:
- msi@79000000 {
- compatible = "apm,xgene1-msi";
- msi-controller;
- reg = <0x00 0x79000000 0x0 0x900000>;
- interrupts = <0x0 0x10 0x4>
- <0x0 0x11 0x4>
- <0x0 0x12 0x4>
- <0x0 0x13 0x4>
- <0x0 0x14 0x4>
- <0x0 0x15 0x4>
- <0x0 0x16 0x4>
- <0x0 0x17 0x4>
- <0x0 0x18 0x4>
- <0x0 0x19 0x4>
- <0x0 0x1a 0x4>
- <0x0 0x1b 0x4>
- <0x0 0x1c 0x4>
- <0x0 0x1d 0x4>
- <0x0 0x1e 0x4>
- <0x0 0x1f 0x4>;
- };
-
- + PCIe controller node with msi-parent property pointing to MSI node:
- pcie0: pcie@1f2b0000 {
- device_type = "pci";
- compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
- 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
- reg-names = "csr", "cfg";
- ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
- 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
- dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
- 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
- dma-coherent;
- clocks = <&pcie0clk 0>;
- msi-parent= <&msi>;
- };
+++ /dev/null
-* AppliedMicro X-Gene PCIe interface
-
-Required properties:
-- device_type: set to "pci"
-- compatible: should contain "apm,xgene-pcie" to identify the core.
-- reg: A list of physical base address and length for each set of controller
- registers. Must contain an entry for each entry in the reg-names
- property.
-- reg-names: Must include the following entries:
- "csr": controller configuration registers.
- "cfg": PCIe configuration space registers.
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- ranges: ranges for the outbound memory, I/O regions.
-- dma-ranges: ranges for the inbound memory regions.
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI properties
- to define the mapping of the PCIe interface to interrupt
- numbers.
-- clocks: from common clock binding: handle to pci clock.
-
-Optional properties:
-- status: Either "ok" or "disabled".
-- dma-coherent: Present if DMA operations are coherent
-
-Example:
-
- pcie0: pcie@1f2b0000 {
- status = "disabled";
- device_type = "pci";
- compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
- 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
- reg-names = "csr", "cfg";
- ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
- 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
- dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
- 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
- dma-coherent;
- clocks = <&pcie0clk 0>;
- };
-
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/apm,xgene-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene 15Gbps Multi-purpose PHY
+
+maintainers:
+ - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description:
+ PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
+ PHY (pair of lanes) has its own node.
+
+properties:
+ compatible:
+ items:
+ - const: apm,xgene-phy
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ description:
+ Possible values are 0 (SATA), 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI).
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ apm,tx-eye-tuning:
+ description:
+ Manual control to fine tune the capture of the serial bit lines from the
+ automatic calibrated position. Two set of 3-tuple setting for each
+ supported link speed on the host. Range from 0 to 127 in unit of one bit
+ period.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 2
+ items:
+ minItems: 3
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 127
+ default: 10
+
+ apm,tx-eye-direction:
+ description:
+ Eye tuning manual control direction. 0 means sample data earlier than the
+ nominal sampling point. 1 means sample data later than the nominal
+ sampling point. Two set of 3-tuple setting for each supported link speed
+ on the host.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 2
+ items:
+ minItems: 3
+ maxItems: 3
+ items:
+ enum: [0, 1]
+ default: 0
+
+ apm,tx-boost-gain:
+ description:
+ Frequency boost AC (LSB 3-bit) and DC (2-bit) gain control. Two set of
+ 3-tuple setting for each supported link speed on the host. Range is
+ between 0 to 31 in unit of dB. Default is 3.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 2
+ items:
+ minItems: 3
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 31
+
+ apm,tx-amplitude:
+ description:
+ Amplitude control. Two set of 3-tuple setting for each supported link
+ speed on the host. Range is between 0 to 199500 in unit of uV.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 2
+ items:
+ minItems: 3
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 199500
+ default: 199500
+
+ apm,tx-pre-cursor1:
+ description:
+ 1st pre-cursor emphasis taps control. Two set of 3-tuple setting for
+ each supported link speed on the host. Range is 0 to 273000 in unit of
+ uV.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 2
+ items:
+ minItems: 3
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 273000
+ default: 0
+
+ apm,tx-pre-cursor2:
+ description:
+ 2nd pre-cursor emphasis taps control. Two set of 3-tuple setting for
+ each supported link speed on the host. Range is 0 to 127400 in unit uV.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 2
+ items:
+ minItems: 3
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 127400
+ default: 0
+
+ apm,tx-post-cursor:
+ description: |
+ Post-cursor emphasis taps control. Two set of 3-tuple setting for Gen1,
+ Gen2, and Gen3 link speeds. Range is between 0 to 31 in unit of 18.2mV.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 2
+ maxItems: 2
+ items:
+ minItems: 3
+ maxItems: 3
+ items:
+ minimum: 0
+ maximum: 31
+ default: 0xf
+
+ apm,tx-speed:
+ description: >
+ Tx operating speed. One set of 3-tuple for each supported link speed on
+ the host:
+
+ 0 = 1-2Gbps
+ 1 = 2-4Gbps (1st tuple default)
+ 2 = 4-8Gbps
+ 3 = 8-15Gbps (2nd tuple default)
+ 4 = 2.5-4Gbps
+ 5 = 4-5Gbps
+ 6 = 5-6Gbps
+ 7 = 6-16Gbps (3rd tuple default).
+
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ maximum: 7
+
+additionalProperties: false
+
+examples:
+ - |
+ phy@1f21a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x1f21a000 0x100>;
+ #phy-cells = <1>;
+ };
+++ /dev/null
-* APM X-Gene 15Gbps Multi-purpose PHY nodes
-
-PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
-PHY (pair of lanes) has its own node.
-
-Required properties:
-- compatible : Shall be "apm,xgene-phy".
-- reg : PHY memory resource is the SDS PHY access resource.
-- #phy-cells : Shall be 1 as it expects one argument for setting
- the mode of the PHY. Possible values are 0 (SATA),
- 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI).
-
-Optional properties:
-- status : Shall be "ok" if enabled or "disabled" if disabled.
- Default is "ok".
-- clocks : Reference to the clock entry.
-- apm,tx-eye-tuning : Manual control to fine tune the capture of the serial
- bit lines from the automatic calibrated position.
- Two set of 3-tuple setting for each (up to 3)
- supported link speed on the host. Range from 0 to
- 127 in unit of one bit period. Default is 10.
-- apm,tx-eye-direction : Eye tuning manual control direction. 0 means sample
- data earlier than the nominal sampling point. 1 means
- sample data later than the nominal sampling point.
- Two set of 3-tuple setting for each (up to 3)
- supported link speed on the host. Default is 0.
-- apm,tx-boost-gain : Frequency boost AC (LSB 3-bit) and DC (2-bit)
- gain control. Two set of 3-tuple setting for each
- (up to 3) supported link speed on the host. Range is
- between 0 to 31 in unit of dB. Default is 3.
-- apm,tx-amplitude : Amplitude control. Two set of 3-tuple setting for
- each (up to 3) supported link speed on the host.
- Range is between 0 to 199500 in unit of uV.
- Default is 199500 uV.
-- apm,tx-pre-cursor1 : 1st pre-cursor emphasis taps control. Two set of
- 3-tuple setting for each (up to 3) supported link
- speed on the host. Range is 0 to 273000 in unit of
- uV. Default is 0.
-- apm,tx-pre-cursor2 : 2nd pre-cursor emphasis taps control. Two set of
- 3-tuple setting for each (up to 3) supported link
- speed on the host. Range is 0 to 127400 in unit uV.
- Default is 0x0.
-- apm,tx-post-cursor : Post-cursor emphasis taps control. Two set of
- 3-tuple setting for Gen1, Gen2, and Gen3. Range is
- between 0 to 0x1f in unit of 18.2mV. Default is 0xf.
-- apm,tx-speed : Tx operating speed. One set of 3-tuple for each
- supported link speed on the host.
- 0 = 1-2Gbps
- 1 = 2-4Gbps (1st tuple default)
- 2 = 4-8Gbps
- 3 = 8-15Gbps (2nd tuple default)
- 4 = 2.5-4Gbps
- 5 = 4-5Gbps
- 6 = 5-6Gbps
- 7 = 6-16Gbps (3rd tuple default)
-
-NOTE: PHY override parameters are board specific setting.
-
-Example:
- phy1: phy@1f21a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f21a000 0x0 0x100>;
- #phy-cells = <1>;
- };
-
- phy2: phy@1f22a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f22a000 0x0 0x100>;
- #phy-cells = <1>;
- };
-
- phy3: phy@1f23a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f23a000 0x0 0x100>;
- #phy-cells = <1>;
- };
+++ /dev/null
-Berlin SATA PHY
----------------
-
-Required properties:
-- compatible: should be one of
- "marvell,berlin2-sata-phy"
- "marvell,berlin2q-sata-phy"
-- address-cells: should be 1
-- size-cells: should be 0
-- phy-cells: from the generic PHY bindings, must be 1
-- reg: address and length of the register
-- clocks: reference to the clock entry
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes required properties:
-- reg: the PHY number
-
-Example:
- sata_phy: phy@f7e900a0 {
- compatible = "marvell,berlin2q-sata-phy";
- reg = <0xf7e900a0 0x200>;
- clocks = <&chip CLKID_SATA>;
- #address-cells = <1>;
- #size-cells = <0>;
- #phy-cells = <1>;
-
- sata-phy@0 {
- reg = <0>;
- };
-
- sata-phy@1 {
- reg = <1>;
- };
- };
+++ /dev/null
-* Marvell Berlin USB PHY
-
-Required properties:
-- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy"
-- reg: base address and length of the registers
-- #phys-cells: should be 0
-- resets: reference to the reset controller
-
-Example:
-
- usb-phy@f774000 {
- compatible = "marvell,berlin2-usb-phy";
- reg = <0xf774000 0x128>;
- #phy-cells = <0>;
- resets = <&chip 0x104 14>;
- };
+++ /dev/null
-BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
-
-Required properties:
- - compatible: brcm,ns2-drd-phy
- - reg: offset and length of the NS2 PHY related registers.
- - reg-names
- The below registers must be provided.
- icfg - for DRD ICFG configurations
- rst-ctrl - for DRD IDM reset
- crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
- usb2-strap - for port over current polarity reversal
- - #phy-cells: Must be 0. No args required.
- - vbus-gpios: vbus gpio binding
- - id-gpios: id gpio binding
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
- usbdrd_phy: phy@66000960 {
- #phy-cells = <0>;
- compatible = "brcm,ns2-drd-phy";
- reg = <0x66000960 0x24>,
- <0x67012800 0x4>,
- <0x6501d148 0x4>,
- <0x664d0700 0x4>;
- reg-names = "icfg", "rst-ctrl",
- "crmu-ctrl", "usb2-strap";
- id-gpios = <&gpio_g 30 0>;
- vbus-gpios = <&gpio_g 31 0>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,ns2-drd-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar2 USB2 Dual Role Device PHY
+
+maintainers:
+ - Florian Fainelli <florian.fainelli@broadcom.com>
+ - Hauke Mehrtens <hauke@hauke-m.de>
+ - Rafał Miłecki <zajec5@gmail.com>
+
+properties:
+ compatible:
+ const: brcm,ns2-drd-phy
+
+ reg:
+ items:
+ - description: DRD ICFG configurations
+ - description: DRD IDM reset
+ - description: CRMU core vdd, PHY and PHY PLL reset
+ - description: Port over current polarity reversal
+
+ reg-names:
+ items:
+ - const: icfg
+ - const: rst-ctrl
+ - const: crmu-ctrl
+ - const: usb2-strap
+
+ '#phy-cells':
+ const: 0
+
+ id-gpios:
+ maxItems: 1
+ description: ID GPIO line
+
+ vbus-gpios:
+ maxItems: 1
+ description: VBUS GPIO line
+
+required:
+ - '#phy-cells'
+ - compatible
+ - reg
+ - reg-names
+ - id-gpios
+ - vbus-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>, <0x67012800 0x4>, <0x6501d148 0x4>, <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl", "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ };
+++ /dev/null
-Broadcom Stingray PCIe PHY
-
-Required properties:
-- compatible: must be "brcm,sr-pcie-phy"
-- reg: base address and length of the PCIe SS register space
-- brcm,sr-cdru: phandle to the CDRU syscon node
-- brcm,sr-mhb: phandle to the MHB syscon node
-- #phy-cells: Must be 1, denotes the PHY index
-
-For PAXB based root complex, one can have a configuration of up to 8 PHYs
-PHY index goes from 0 to 7
-
-For the internal PAXC based root complex, PHY index is always 8
-
-Example:
- mhb: syscon@60401000 {
- compatible = "brcm,sr-mhb", "syscon";
- reg = <0 0x60401000 0 0x38c>;
- };
-
- cdru: syscon@6641d000 {
- compatible = "brcm,sr-cdru", "syscon";
- reg = <0 0x6641d000 0 0x400>;
- };
-
- pcie_phy: phy@40000000 {
- compatible = "brcm,sr-pcie-phy";
- reg = <0 0x40000000 0 0x800>;
- brcm,sr-cdru = <&cdru>;
- brcm,sr-mhb = <&mhb>;
- #phy-cells = <1>;
- };
-
- /* users of the PCIe PHY */
-
- pcie0: pcie@48000000 {
- ...
- ...
- phys = <&pcie_phy 0>;
- phy-names = "pcie-phy";
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,sr-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Stingray PCIe PHY
+
+maintainers:
+ - Ray Jui <ray.jui@broadcom.com>
+
+description: >
+ For PAXB based root complex, one can have a configuration of up to 8 PHYs.
+ PHY index goes from 0 to 7.
+
+ For the internal PAXC based root complex, PHY index is always 8.
+
+properties:
+ compatible:
+ const: brcm,sr-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 1
+
+ brcm,sr-cdru:
+ description: phandle to the CDRU syscon node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ brcm,sr-mhb:
+ description: phandle to the MHB syscon node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+additionalProperties: false
+
+examples:
+ - |
+ phy@40000000 {
+ compatible = "brcm,sr-pcie-phy";
+ reg = <0x40000000 0x800>;
+ brcm,sr-cdru = <&cdru>;
+ brcm,sr-mhb = <&mhb>;
+ #phy-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,sr-usb-combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Stingray USB PHY
+
+maintainers:
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+properties:
+ compatible:
+ enum:
+ - brcm,sr-usb-combo-phy
+ - brcm,sr-usb-hs-phy
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ description: PHY cell count indicating PHY type
+ enum: [ 0, 1 ]
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,sr-usb-combo-phy
+ then:
+ properties:
+ '#phy-cells':
+ const: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,sr-usb-hs-phy
+ then:
+ properties:
+ '#phy-cells':
+ const: 0
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy@0 {
+ compatible = "brcm,sr-usb-combo-phy";
+ reg = <0x00000000 0x100>;
+ #phy-cells = <1>;
+ };
+ - |
+ usb-phy@20000 {
+ compatible = "brcm,sr-usb-hs-phy";
+ reg = <0x00020000 0x100>;
+ #phy-cells = <0>;
+ };
+++ /dev/null
-Broadcom Stingray USB PHY
-
-Required properties:
- - compatible : should be one of the listed compatibles
- - "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS.
- - "brcm,sr-usb-hs-phy" is a single HS PHY.
- - reg: offset and length of the PHY blocks registers
- - #phy-cells:
- - Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate
- the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY.
- - Must be 0 for brcm,sr-usb-hs-phy.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
- usbphy0: usb-phy@0 {
- compatible = "brcm,sr-usb-combo-phy";
- reg = <0x00000000 0x100>;
- #phy-cells = <1>;
- };
-
- usbphy1: usb-phy@10000 {
- compatible = "brcm,sr-usb-combo-phy";
- reg = <0x00010000 0x100>,
- #phy-cells = <1>;
- };
-
- usbphy2: usb-phy@20000 {
- compatible = "brcm,sr-usb-hs-phy";
- reg = <0x00020000 0x100>,
- #phy-cells = <0>;
- };
+++ /dev/null
-Device tree binding documentation for am816x USB PHY
-=========================
-
-Required properties:
-- compatible : should be "ti,dm816x-usb-phy"
-- reg : offset and length of the PHY register set.
-- reg-names : name for the phy registers
-- clocks : phandle to the clock
-- clock-names : name of the clock
-- syscon: phandle for the syscon node to access misc registers
-- #phy-cells : from the generic PHY bindings, must be 1
-- syscon: phandle for the syscon node to access misc registers
-
-Example:
-
-usb_phy0: usb-phy@20 {
- compatible = "ti,dm8168-usb-phy";
- reg = <0x20 0x8>;
- reg-names = "phy";
- clocks = <&main_fapll 6>;
- clock-names = "refclk";
- #phy-cells = <0>;
- syscon = <&scm_conf>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi6220-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon hi6220 USB PHY
+
+maintainers:
+ - Zhangfei Gao <zhangfei.gao@linaro.org>
+
+properties:
+ compatible:
+ const: hisilicon,hi6220-usb-phy
+
+ '#phy-cells':
+ const: 0
+
+ phy-supply:
+ description: PHY power supply.
+
+ hisilicon,peripheral-syscon:
+ description: Phandle to the system controller for PHY control.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+additionalProperties: false
+
+examples:
+ - |
+ usbphy {
+ compatible = "hisilicon,hi6220-usb-phy";
+ #phy-cells = <0>;
+ phy-supply = <&fixed_5v_hub>;
+ hisilicon,peripheral-syscon = <&sys_ctrl>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hix5hd2-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon hix5hd2 SATA PHY
+
+maintainers:
+ - Jiancheng Xue <xuejiancheng@huawei.com>
+
+properties:
+ compatible:
+ const: hisilicon,hix5hd2-sata-phy
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ hisilicon,peripheral-syscon:
+ description: Phandle of syscon used to control peripheral
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ hisilicon,power-reg:
+ description: Offset and bit number within peripheral-syscon register controlling SATA power supply
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: Offset within peripheral-syscon register
+ - description: Bit number controlling SATA power supply
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ phy@f9900000 {
+ compatible = "hisilicon,hix5hd2-sata-phy";
+ reg = <0xf9900000 0x10000>;
+ #phy-cells = <0>;
+ hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+ hisilicon,power-reg = <0x8 10>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,inno-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon INNO USB2 PHY
+
+maintainers:
+ - Pengcheng Li <lpc.li@hisilicon.com>
+
+description:
+ The INNO USB2 PHY device should be a child node of peripheral controller that
+ contains the PHY configuration register, and each device supports up to 2 PHY
+ ports which are represented as child nodes of INNO USB2 PHY device.
+
+properties:
+ compatible:
+ enum:
+ - hisilicon,hi3798cv200-usb2-phy
+ - hisilicon,hi3798mv100-usb2-phy
+ - hisilicon,inno-usb2-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^phy@[0-1]$":
+ description: PHY port subnode
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ maximum: 1
+
+ "#phy-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ required:
+ - reg
+ - "#phy-cells"
+ - resets
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/histb-clock.h>
+
+ usb2-phy@120 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x120 0x4>;
+ clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+ resets = <&crg 0xbc 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 8>;
+ };
+
+ phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 9>;
+ };
+ };
+++ /dev/null
-Hisilicon hix5hd2 SATA PHY
------------------------
-
-Required properties:
-- compatible: should be "hisilicon,hix5hd2-sata-phy"
-- reg: offset and length of the PHY registers
-- #phy-cells: must be 0
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Optional Properties:
-- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
-- hisilicon,power-reg: offset and bit number within peripheral-syscon,
- register of controlling sata power supply.
-
-Example:
- sata_phy: phy@f9900000 {
- compatible = "hisilicon,hix5hd2-sata-phy";
- reg = <0xf9900000 0x10000>;
- #phy-cells = <0>;
- hisilicon,peripheral-syscon = <&peripheral_ctrl>;
- hisilicon,power-reg = <0x8 10>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/img,pistachio-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Pistachio USB PHY
+
+maintainers:
+ - Andrew Bresticker <abrestic@chromium.org>
+
+properties:
+ compatible:
+ const: img,pistachio-usb-phy
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: usb_phy
+
+ '#phy-cells':
+ const: 0
+
+ phy-supply:
+ description: USB VBUS supply. Must supply 5.0V.
+
+ img,refclk:
+ description:
+ Reference clock source for the USB PHY. See
+ <dt-bindings/phy/phy-pistachio-usb.h> for valid values.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ img,cr-top:
+ description: CR_TOP syscon phandle.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - '#phy-cells'
+ - img,refclk
+ - img,cr-top
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy-pistachio-usb.h>
+ #include <dt-bindings/clock/pistachio-clk.h>
+
+ usb-phy {
+ compatible = "img,pistachio-usb-phy";
+ clocks = <&clk_core CLK_USB_PHY>;
+ clock-names = "usb_phy";
+ #phy-cells = <0>;
+ phy-supply = <&usb_vbus>;
+ img,refclk = <REFCLK_CLK_CORE>;
+ img,cr-top = <&cr_top>;
+ };
+++ /dev/null
-TI Keystone USB PHY
-
-Required properties:
- - compatible: should be "ti,keystone-usbphy".
- - #address-cells, #size-cells : should be '1' if the device has sub-nodes
- with 'reg' property.
- - reg : Address and length of the usb phy control register set.
-
-The main purpose of this PHY driver is to enable the USB PHY reference clock
-gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just
-an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3
-phy node in the USB Glue layer driver node.
-
-usb_phy: usb_phy@2620738 {
- compatible = "ti,keystone-usbphy";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x2620738 32>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/lantiq,ase-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq XWAY SoC RCU USB 1.1/2.0 PHY
+
+maintainers:
+ - Hauke Mehrtens <hauke@hauke-m.de>
+
+description:
+ This node has to be a sub node of the Lantiq RCU block.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - lantiq,ase-usb2-phy
+ - lantiq,danube-usb2-phy
+ - lantiq,xrx100-usb2-phy
+ - lantiq,xrx200-usb2-phy
+ - lantiq,xrx300-usb2-phy
+
+ reg:
+ items:
+ - description: Offset of the USB PHY configuration register
+ - description: Offset of the USB Analog configuration register
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: phy
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ items:
+ - enum: [ phy, ctrl ]
+ - const: ctrl
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ usb2-phy@18 {
+ compatible = "lantiq,xrx200-usb2-phy";
+ reg = <0x18 4>, <0x38 4>;
+ clocks = <&pmu 1>;
+ clock-names = "phy";
+ resets = <&reset1 4 4>, <&reset0 4 4>;
+ reset-names = "phy", "ctrl";
+ #phy-cells = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,armada-375-usb-cluster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Armada 375 USB Cluster
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+description:
+ Control register for the Armada 375 USB cluster, managing USB2 and USB3 features.
+
+properties:
+ compatible:
+ const: marvell,armada-375-usb-cluster
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ description: Number of PHY cells in specifier. 1 for USB2, 2 for USB3.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ usbcluster: usb-cluster@18400 {
+ compatible = "marvell,armada-375-usb-cluster";
+ reg = <0x18400 0x4>;
+ #phy-cells = <1>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,armada-380-comphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 38x COMPHY controller
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+description:
+ This comphy controller can be found on Marvell Armada 38x. It provides a
+ number of shared PHYs used by various interfaces (network, sata, usb,
+ PCIe...).
+
+properties:
+ compatible:
+ items:
+ - const: marvell,armada-380-comphy
+
+ reg:
+ items:
+ - description: COMPHY register location and length
+ - description: Configuration register location and length
+
+ reg-names:
+ items:
+ - const: comphy
+ - const: conf
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ '^phy@[0-5]$':
+ description: A COMPHY lane
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ maximum: 1
+
+ '#phy-cells':
+ description: Input port index for the PHY lane
+ const: 1
+
+ required:
+ - reg
+ - '#phy-cells'
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ comphy: phy@18300 {
+ compatible = "marvell,armada-380-comphy";
+ reg = <0x18300 0x100>, <0x18460 4>;
+ reg-names = "comphy", "conf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpm_comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ cpm_comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,berlin2-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Berlin SATA PHY
+
+maintainers:
+ - Antoine Tenart <atenart@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - marvell,berlin2-sata-phy
+ - marvell,berlin2q-sata-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ '#phy-cells':
+ const: 1
+
+patternProperties:
+ '^sata-phy@[0-1]$':
+ description: A SATA PHY sub-node.
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ maximum: 1
+ description: PHY index number.
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#address-cells'
+ - '#size-cells'
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/berlin2q.h>
+
+ phy@f7e900a0 {
+ compatible = "marvell,berlin2q-sata-phy";
+ reg = <0xf7e900a0 0x200>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <1>;
+
+ sata-phy@0 {
+ reg = <0>;
+ };
+
+ sata-phy@1 {
+ reg = <1>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,berlin2-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Berlin USB PHY
+
+maintainers:
+ - Antoine Tenart <atenart@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - marvell,berlin2-usb-phy
+ - marvell,berlin2cd-usb-phy
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy@f774000 {
+ compatible = "marvell,berlin2-usb-phy";
+ reg = <0xf774000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 0x104 14>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,comphy-cp110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU COMPHY Controller
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+ COMPHY controllers can be found on the following Marvell MVEBU SoCs:
+
+ * Armada 7k/8k (on the CP110)
+ * Armada 3700
+
+ It provides a number of shared PHYs used by various interfaces (network, SATA,
+ USB, PCIe...).
+
+properties:
+ compatible:
+ enum:
+ - marvell,comphy-cp110
+ - marvell,comphy-a3700
+
+ reg:
+ minItems: 1
+ items:
+ - description: Generic COMPHY registers
+ - description: Lane 1 (PCIe/GbE) registers (Armada 3700)
+ - description: Lane 0 (USB3/GbE) registers (Armada 3700)
+ - description: Lane 2 (SATA/USB3) registers (Armada 3700)
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: comphy
+ - const: lane1_pcie_gbe
+ - const: lane0_usb3_gbe
+ - const: lane2_sata_usb3
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ marvell,system-controller:
+ description: Phandle to the Marvell system controller (CP110 only)
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+ '^phy@[0-5]$':
+ description: A COMPHY lane child node
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ description: COMPHY lane number
+ maximum: 5
+
+ '#phy-cells':
+ const: 1
+
+ connector:
+ type: object
+
+ required:
+ - reg
+ - '#phy-cells'
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: marvell,comphy-a3700
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ const: xtal
+
+ required:
+ - reg-names
+
+ else:
+ properties:
+ clocks:
+ minItems: 3
+ clock-names:
+ items:
+ - const: mg_clk
+ - const: mg_core_clk
+ - const: axi_clk
+
+ required:
+ - marvell,system-controller
+
+examples:
+ - |
+ phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ clocks = <&clk 1 5>, <&clk 1 6>, <&clk 1 18>;
+ clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ marvell,system-controller = <&syscon0>;
+
+ phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+ };
+
+ - |
+ phy@18300 {
+ compatible = "marvell,comphy-a3700";
+ reg = <0x18300 0x300>,
+ <0x1F000 0x400>,
+ <0x5C000 0x400>,
+ <0xe0178 0x8>;
+ reg-names = "comphy",
+ "lane1_pcie_gbe",
+ "lane0_usb3_gbe",
+ "lane2_sata_usb3";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,mmp2-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2/PXA USB PHY
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+ compatible:
+ enum:
+ - marvell,mmp2-usb-phy
+ - marvell,pxa910-usb-phy
+ - marvell,pxa168-usb-phy
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ usbphy@d4207000 {
+ compatible = "marvell,mmp2-usb-phy";
+ reg = <0xd4207000 0x40>;
+ #phy-cells = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,mvebu-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU SATA PHY
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+ compatible:
+ const: marvell,mvebu-sata-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: sata
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ sata-phy@84000 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0x84000 0x0334>;
+ clocks = <&gate_clk 15>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ };
contains:
const: fsl,imx8qxp-mipi-dphy
then:
- properties:
- assigned-clocks: false
- assigned-clock-parents: false
- assigned-clock-rates: false
-
required:
- fsl,syscon
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/motorola,cpcap-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC USB PHY
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+properties:
+ compatible:
+ enum:
+ - motorola,cpcap-usb-phy
+ - motorola,mapphone-cpcap-usb-phy
+
+ '#phy-cells':
+ const: 0
+
+ interrupts:
+ description: CPCAP PMIC interrupts used by the USB PHY
+ items:
+ - description: id_ground interrupt
+ - description: id_float interrupt
+ - description: se0conn interrupt
+ - description: vbusvld interrupt
+ - description: sessvld interrupt
+ - description: sessend interrupt
+ - description: se1 interrupt
+ - description: dm interrupt
+ - description: dp interrupt
+
+ interrupt-names:
+ description: Interrupt names
+ items:
+ - const: id_ground
+ - const: id_float
+ - const: se0conn
+ - const: vbusvld
+ - const: sessvld
+ - const: sessend
+ - const: se1
+ - const: dm
+ - const: dp
+
+ io-channels:
+ description: IIO ADC channels used by the USB PHY
+ items:
+ - description: vbus channel
+ - description: id channel
+
+ io-channel-names:
+ items:
+ - const: vbus
+ - const: id
+
+ vusb-supply: true
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: ulpi
+ - const: utmi
+ - const: uart
+
+ mode-gpios:
+ description: Optional GPIOs for configuring alternate modes
+ items:
+ - description: "mode selection GPIO #0"
+ - description: "mode selection GPIO #1"
+
+required:
+ - compatible
+ - '#phy-cells'
+ - interrupts-extended
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+ - vusb-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+ #phy-cells = <0>;
+ interrupts-extended = <
+ &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+ &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+ &cpcap 48 1
+ >;
+ interrupt-names = "id_ground", "id_float", "se0conn", "vbusvld",
+ "sessvld", "sessend", "se1", "dm", "dp";
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+ vusb-supply = <&vusb>;
+ pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/motorola,mapphone-mdm6600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola Mapphone MDM6600 USB PHY
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+properties:
+ compatible:
+ items:
+ - const: motorola,mapphone-mdm6600
+
+ enable-gpios:
+ description: GPIO to enable the USB PHY
+ maxItems: 1
+
+ power-gpios:
+ description: GPIO to power on the device
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO to reset the device
+ maxItems: 1
+
+ motorola,mode-gpios:
+ description: Two GPIOs to configure MDM6600 USB start-up mode for normal mode versus USB flashing mode
+ items:
+ - description: normal mode select GPIO
+ - description: USB flashing mode select GPIO
+
+ motorola,cmd-gpios:
+ description: Three GPIOs to control the power state of the MDM6600
+ items:
+ - description: power state control GPIO 0
+ - description: power state control GPIO 1
+ - description: power state control GPIO 2
+
+ motorola,status-gpios:
+ description: Three GPIOs to read the power state of the MDM6600
+ items:
+ - description: power state read GPIO 0
+ - description: power state read GPIO 1
+ - description: power state read GPIO 2
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - enable-gpios
+ - power-gpios
+ - reset-gpios
+ - motorola,mode-gpios
+ - motorola,cmd-gpios
+ - motorola,status-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ usb-phy {
+ compatible = "motorola,mapphone-mdm6600";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
+++ /dev/null
-mvebu armada 38x comphy driver
-------------------------------
-
-This comphy controller can be found on Marvell Armada 38x. It provides a
-number of shared PHYs used by various interfaces (network, sata, usb,
-PCIe...).
-
-Required properties:
-
-- compatible: should be "marvell,armada-380-comphy"
-- reg: should contain the comphy register location and length.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional properties:
-
-- reg-names: must be "comphy" as the first name, and "conf".
-- reg: must contain the comphy register location and length as the first
- pair, followed by an optional configuration register address and
- length pair.
-
-A sub-node is required for each comphy lane provided by the comphy.
-
-Required properties (child nodes):
-
-- reg: comphy lane number.
-- #phy-cells : from the generic phy bindings, must be 1. Defines the
- input port to use for a given comphy lane.
-
-Example:
-
- comphy: phy@18300 {
- compatible = "marvell,armada-380-comphy";
- reg-names = "comphy", "conf";
- reg = <0x18300 0x100>, <0x18460 4>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpm_comphy0: phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- cpm_comphy1: phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
- };
+++ /dev/null
-* Atheros AR71XX/9XXX USB PHY
-
-Required properties:
-- compatible: "qca,ar7100-usb-phy"
-- #phys-cells: should be 0
-- reset-names: "phy"[, "suspend-override"]
-- resets: references to the reset controllers
-
-Example:
-
- usb-phy {
- compatible = "qca,ar7100-usb-phy";
-
- reset-names = "phy", "suspend-override";
- resets = <&rst 4>, <&rst 3>;
-
- #phy-cells = <0>;
- };
+++ /dev/null
-Motorola CPCAP PMIC USB PHY binding
-
-Required properties:
-compatible: Shall be either "motorola,cpcap-usb-phy" or
- "motorola,mapphone-cpcap-usb-phy"
-#phy-cells: Shall be 0
-interrupts: CPCAP PMIC interrupts used by the USB PHY
-interrupt-names: Interrupt names
-io-channels: IIO ADC channels used by the USB PHY
-io-channel-names: IIO ADC channel names
-vusb-supply: Regulator for the PHY
-
-Optional properties:
-pinctrl: Optional alternate pin modes for the PHY
-pinctrl-names: Names for optional pin modes
-mode-gpios: Optional GPIOs for configuring alternate modes
-
-Example:
-cpcap_usb2_phy: phy {
- compatible = "motorola,mapphone-cpcap-usb-phy";
- pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
- pinctrl-1 = <&usb_ulpi_pins>;
- pinctrl-2 = <&usb_utmi_pins>;
- pinctrl-3 = <&uart3_pins>;
- pinctrl-names = "default", "ulpi", "utmi", "uart";
- #phy-cells = <0>;
- interrupts-extended = <
- &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
- &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
- &cpcap 48 1
- >;
- interrupt-names =
- "id_ground", "id_float", "se0conn", "vbusvld",
- "sessvld", "sessend", "se1", "dm", "dp";
- mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
- &gpio1 0 GPIO_ACTIVE_HIGH>;
- io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
- io-channel-names = "vbus", "id";
- vusb-supply = <&vusb>;
-};
+++ /dev/null
-TI DA8xx/OMAP-L1xx/AM18xx USB PHY
-
-Required properties:
- - compatible: must be "ti,da830-usb-phy".
- - #phy-cells: must be 1.
-
-This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG
-controllers on DA8xx SoCs. Consumers of this device should use index 0 for
-the USB 2.0 phy device and index 1 for the USB 1.1 phy device.
-
-It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon"
-to access the CFGCHIP2 register.
-
-Example:
-
- cfgchip: cfgchip@1417c {
- compatible = "ti,da830-cfgchip", "syscon";
- reg = <0x1417c 0x14>;
- };
-
- usb_phy: usb-phy {
- compatible = "ti,da830-usb-phy";
- #phy-cells = <1>;
- };
-
- usb20: usb@200000 {
- compatible = "ti,da830-musb";
- reg = <0x200000 0x1000>;
- interrupts = <58>;
- phys = <&usb_phy 0>;
- phy-names = "usb-phy";
- };
-
- usb11: usb@225000 {
- compatible = "ti,da830-ohci";
- reg = <0x225000 0x1000>;
- interrupts = <59>;
- phys = <&usb_phy 1>;
- phy-names = "usb-phy";
- };
+++ /dev/null
-Hisilicon hi6220 usb PHY
------------------------
-
-Required properties:
-- compatible: should be "hisilicon,hi6220-usb-phy"
-- #phy-cells: must be 0
-- hisilicon,peripheral-syscon: phandle of syscon used to control phy.
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
- usb_phy: usbphy {
- compatible = "hisilicon,hi6220-usb-phy";
- #phy-cells = <0>;
- phy-supply = <&fixed_5v_hub>;
- hisilicon,peripheral-syscon = <&sys_ctrl>;
- };
+++ /dev/null
-Device tree bindings for HiSilicon INNO USB2 PHY
-
-Required properties:
-- compatible: Should be one of the following strings:
- "hisilicon,inno-usb2-phy",
- "hisilicon,hi3798cv200-usb2-phy".
-- reg: Should be the address space for PHY configuration register in peripheral
- controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
-- clocks: The phandle and clock specifier pair for INNO USB2 PHY device
- reference clock.
-- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
- signal.
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-
-The INNO USB2 PHY device should be a child node of peripheral controller that
-contains the PHY configuration register, and each device supports up to 2 PHY
-ports which are represented as child nodes of INNO USB2 PHY device.
-
-Required properties for PHY port node:
-- reg: The PHY port instance number.
-- #phy-cells: Defined by generic PHY bindings. Must be 0.
-- resets: The phandle and reset specifier pair for PHY port reset signal.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
-
-perictrl: peripheral-controller@8a20000 {
- compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd";
- reg = <0x8a20000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x8a20000 0x1000>;
-
- usb2_phy1: usb2-phy@120 {
- compatible = "hisilicon,hi3798cv200-usb2-phy";
- reg = <0x120 0x4>;
- clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
- resets = <&crg 0xbc 4>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_phy1_port0: phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- resets = <&crg 0xbc 8>;
- };
-
- usb2_phy1_port1: phy@1 {
- reg = <1>;
- #phy-cells = <0>;
- resets = <&crg 0xbc 9>;
- };
- };
-
- usb2_phy2: usb2-phy@124 {
- compatible = "hisilicon,hi3798cv200-usb2-phy";
- reg = <0x124 0x4>;
- clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
- resets = <&crg 0xbc 6>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_phy2_port0: phy@0 {
- reg = <0>;
- #phy-cells = <0>;
- resets = <&crg 0xbc 10>;
- };
- };
-};
+++ /dev/null
-Lantiq XWAY SoC RCU USB 1.1/2.0 PHY binding
-===========================================
-
-This binding describes the USB PHY hardware provided by the RCU module on the
-Lantiq XWAY SoCs.
-
-This node has to be a sub node of the Lantiq RCU block.
-
--------------------------------------------------------------------------------
-Required properties (controller (parent) node):
-- compatible : Should be one of
- "lantiq,ase-usb2-phy"
- "lantiq,danube-usb2-phy"
- "lantiq,xrx100-usb2-phy"
- "lantiq,xrx200-usb2-phy"
- "lantiq,xrx300-usb2-phy"
-- reg : Defines the following sets of registers in the parent
- syscon device
- - Offset of the USB PHY configuration register
- - Offset of the USB Analog configuration
- register (only for xrx200 and xrx200)
-- clocks : References to the (PMU) "phy" clk gate.
-- clock-names : Must be "phy"
-- resets : References to the RCU USB configuration reset bits.
-- reset-names : Must be one of the following:
- "phy" (optional)
- "ctrl" (shared)
-
--------------------------------------------------------------------------------
-Example for the USB PHYs on an xRX200 SoC:
- usb_phy0: usb2-phy@18 {
- compatible = "lantiq,xrx200-usb2-phy";
- reg = <0x18 4>, <0x38 4>;
-
- clocks = <&pmu PMU_GATE_USB0_PHY>;
- clock-names = "phy";
- resets = <&reset1 4 4>, <&reset0 4 4>;
- reset-names = "phy", "ctrl";
- #phy-cells = <0>;
- };
+++ /dev/null
-NXP LPC18xx/43xx internal USB OTG PHY binding
----------------------------------------------
-
-This file contains documentation for the internal USB OTG PHY found
-in NXP LPC18xx and LPC43xx SoCs.
-
-Required properties:
-- compatible : must be "nxp,lpc1850-usb-otg-phy"
-- clocks : must be exactly one entry
-See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- #phy-cells : must be 0 for this phy
-See: Documentation/devicetree/bindings/phy/phy-bindings.txt
-
-The phy node must be a child of the creg syscon node.
-
-Example:
-creg: syscon@40043000 {
- compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
- reg = <0x40043000 0x1000>;
-
- usb0_otg_phy: phy {
- compatible = "nxp,lpc1850-usb-otg-phy";
- clocks = <&ccu1 CLK_USB0>;
- #phy-cells = <0>;
- };
-};
+++ /dev/null
-Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY
-
-Required properties:
-- compatible Must be "motorola,mapphone-mdm6600"
-- enable-gpios GPIO to enable the USB PHY
-- power-gpios GPIO to power on the device
-- reset-gpios GPIO to reset the device
-- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for
- normal mode versus USB flashing mode
-- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600
-- motorola,status-gpios Three GPIOs to read the power state of the MDM6600
-
-Example:
-
-usb-phy {
- compatible = "motorola,mapphone-mdm6600";
- enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
- power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
- motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
- <&gpio5 21 GPIO_ACTIVE_HIGH>;
- motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
- <&gpio4 8 GPIO_ACTIVE_HIGH>,
- <&gpio5 14 GPIO_ACTIVE_HIGH>;
- motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
- <&gpio2 21 GPIO_ACTIVE_HIGH>,
- <&gpio2 23 GPIO_ACTIVE_HIGH>;
- #phy-cells = <0>;
-};
+++ /dev/null
-MVEBU comphy drivers
---------------------
-
-COMPHY controllers can be found on the following Marvell MVEBU SoCs:
-* Armada 7k/8k (on the CP110)
-* Armada 3700
-It provides a number of shared PHYs used by various interfaces (network, SATA,
-USB, PCIe...).
-
-Required properties:
-
-- compatible: should be one of:
- * "marvell,comphy-cp110" for Armada 7k/8k
- * "marvell,comphy-a3700" for Armada 3700
-- reg: should contain the COMPHY register(s) location(s) and length(s).
- * 1 entry for Armada 7k/8k
- * 4 entries for Armada 3700 along with the corresponding reg-names
- properties, memory areas are:
- * Generic COMPHY registers
- * Lane 1 (PCIe/GbE)
- * Lane 0 (USB3/GbE)
- * Lane 2 (SATA/USB3)
-- marvell,system-controller: should contain a phandle to the system
- controller node (only for Armada 7k/8k)
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional properlties:
-
-- clocks: pointers to the reference clocks for this device (CP110 only),
- consequently: MG clock, MG Core clock, AXI clock.
-- clock-names: names of used clocks for CP110 only, must be :
- "mg_clk", "mg_core_clk" and "axi_clk".
-
-A sub-node is required for each comphy lane provided by the comphy.
-
-Required properties (child nodes):
-
-- reg: COMPHY lane number.
-- #phy-cells : from the generic PHY bindings, must be 1. Defines the
- input port to use for a given comphy lane.
-
-Examples:
-
- CP11X_LABEL(comphy): phy@120000 {
- compatible = "marvell,comphy-cp110";
- reg = <0x120000 0x6000>;
- marvell,system-controller = <&CP11X_LABEL(syscon0)>;
- clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
- <&CP11X_LABEL(clk) 1 18>;
- clock-names = "mg_clk", "mg_core_clk", "axi_clk";
- #address-cells = <1>;
- #size-cells = <0>;
-
- CP11X_LABEL(comphy0): phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- CP11X_LABEL(comphy1): phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
- };
-
- comphy: phy@18300 {
- compatible = "marvell,comphy-a3700";
- reg = <0x18300 0x300>,
- <0x1F000 0x400>,
- <0x5C000 0x400>,
- <0xe0178 0x8>;
- reg-names = "comphy",
- "lane1_pcie_gbe",
- "lane0_usb3_gbe",
- "lane2_sata_usb3";
- #address-cells = <1>;
- #size-cells = <0>;
-
-
- comphy0: phy@0 {
- reg = <0>;
- #phy-cells = <1>;
- };
-
- comphy1: phy@1 {
- reg = <1>;
- #phy-cells = <1>;
- };
-
- comphy2: phy@2 {
- reg = <2>;
- #phy-cells = <1>;
- };
- };
+++ /dev/null
-* Marvell MVEBU SATA PHY
-
-Power control for the SATA phy found on Marvell MVEBU SoCs.
-
-This document extends the binding described in phy-bindings.txt
-
-Required properties :
-
- - reg : Offset and length of the register set for the SATA device
- - compatible : Should be "marvell,mvebu-sata-phy"
- - clocks : phandle of clock and specifier that supplies the device
- - clock-names : Should be "sata"
-
-Example:
- sata-phy@84000 {
- compatible = "marvell,mvebu-sata-phy";
- reg = <0x84000 0x0334>;
- clocks = <&gate_clk 15>;
- clock-names = "sata";
- #phy-cells = <0>;
- };
-
-Armada 375 USB cluster
-----------------------
-
-Armada 375 comes with an USB2 host and device controller and an USB3
-controller. The USB cluster control register allows to manage common
-features of both USB controllers.
-
-Required properties:
-
-- compatible: "marvell,armada-375-usb-cluster"
-- reg: Should contain usb cluster register location and length.
-- #phy-cells : from the generic phy bindings, must be 1. Possible
-values are 1 (USB2), 2 (USB3).
-
-Example:
- usbcluster: usb-cluster@18400 {
- compatible = "marvell,armada-375-usb-cluster";
- reg = <0x18400 0x4>;
- #phy-cells = <1>
- };
+++ /dev/null
-Marvell PXA USB PHY
--------------------
-
-Required properties:
-- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy",
- "marvell,pxa168-usb-phy",
-- #phy-cells: must be 0
-
-Example:
- usb-phy: usbphy@d4207000 {
- compatible = "marvell,mmp2-usb-phy";
- reg = <0xd4207000 0x40>;
- #phy-cells = <0>;
- status = "okay";
- };
-
-This document explains the device tree binding. For general
-information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst
+++ /dev/null
-IMG Pistachio USB PHY
-=====================
-
-Required properties:
---------------------
- - compatible: Must be "img,pistachio-usb-phy".
- - #phy-cells: Must be 0. See ./phy-bindings.txt for details.
- - clocks: Must contain an entry for each entry in clock-names.
- See ../clock/clock-bindings.txt for details.
- - clock-names: Must include "usb_phy".
- - img,cr-top: Must contain a phandle to the CR_TOP syscon node.
- - img,refclk: Indicates the reference clock source for the USB PHY.
- See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values.
-
-Optional properties:
---------------------
- - phy-supply: USB VBUS supply. Must supply 5.0V.
-
-Example:
---------
-usb_phy: usb-phy {
- compatible = "img,pistachio-usb-phy";
- clocks = <&clk_core CLK_USB_PHY>;
- clock-names = "usb_phy";
- phy-supply = <&usb_vbus>;
- img,refclk = <REFCLK_CLK_CORE>;
- img,cr-top = <&cr_top>;
- #phy-cells = <0>;
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qca,ar7100-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atheros AR71XX/9XXX USB PHY
+
+maintainers:
+ - Alban Bedel <albeu@free.fr>
+
+properties:
+ compatible:
+ items:
+ - const: qca,ar7100-usb-phy
+
+ reset-names:
+ description: Names of reset lines in order.
+ minItems: 1
+ items:
+ - const: phy
+ - const: suspend-override
+
+ resets:
+ description: References to the reset controllers.
+ minItems: 1
+ items:
+ - description: Reset controller for phy
+ - description: Reset controller for suspend-override
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reset-names
+ - resets
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy {
+ compatible = "qca,ar7100-usb-phy";
+ reset-names = "phy", "suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+ #phy-cells = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,m31-eusb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm M31 eUSB2 phy
+
+maintainers:
+ - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description:
+ M31 based eUSB2 controller, which supports LS/FS/HS usb connectivity
+ on Qualcomm chipsets. It is paired with a eUSB2 repeater.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sm8750-m31-eusb2-phy
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: reference clock
+
+ clock-names:
+ items:
+ - const: ref
+
+ resets:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+ description:
+ Phandle to eUSB2 repeater
+
+ vdd-supply:
+ description:
+ Phandle to 0.88V regulator supply to PHY digital circuit.
+
+ vdda12-supply:
+ description:
+ Phandle to 1.2V regulator supply to PHY refclk pll block.
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - resets
+ - vdd-supply
+ - vdda12-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sm8750-m31-eusb2-phy";
+ reg = <0x88e3000 0x29c>;
+
+ clocks = <&tcsrcc_usb2_clkref_en>;
+ clock-names = "ref";
+
+ resets = <&gcc_qusb2phy_prim_bcr>;
+
+ #phy-cells = <0>;
+
+ vdd-supply = <&vreg_l2d_0p88>;
+ vdda12-supply = <&vreg_l3g_1p2>;
+ };
compatible:
contains:
enum:
+ - qcom,qcs615-qmp-gen3x1-pcie-phy
- qcom,sar2130p-qmp-gen3x2-pcie-phy
- qcom,sc8180x-qmp-pcie-phy
- qcom,sdm845-qhp-pcie-phy
compatible:
contains:
enum:
- - qcom,qcs615-qmp-gen3x1-pcie-phy
+ - qcom,sa8775p-qmp-gen4x2-pcie-phy
+ - qcom,sa8775p-qmp-gen4x4-pcie-phy
- qcom,sc8280xp-qmp-gen3x1-pcie-phy
- qcom,sc8280xp-qmp-gen3x2-pcie-phy
- qcom,sc8280xp-qmp-gen3x4-pcie-phy
contains:
enum:
- qcom,qcs8300-qmp-gen4x2-pcie-phy
- - qcom,sa8775p-qmp-gen4x2-pcie-phy
- - qcom,sa8775p-qmp-gen4x4-pcie-phy
then:
properties:
clocks:
- qcom,sm8450-qmp-usb3-dp-phy
- qcom,sm8550-qmp-usb3-dp-phy
- qcom,sm8650-qmp-usb3-dp-phy
+ - qcom,sm8750-qmp-usb3-dp-phy
- qcom,x1e80100-qmp-usb3-dp-phy
reg:
- qcom,sm6350-qmp-usb3-dp-phy
- qcom,sm8550-qmp-usb3-dp-phy
- qcom,sm8650-qmp-usb3-dp-phy
+ - qcom,sm8750-qmp-usb3-dp-phy
- qcom,x1e80100-qmp-usb3-dp-phy
then:
required:
oneOf:
- items:
- enum:
+ - qcom,milos-snps-eusb2-phy
- qcom,sar2130p-snps-eusb2-phy
- qcom,sdx75-snps-eusb2-phy
- qcom,sm8650-snps-eusb2-phy
description: High-Speed disconnect threshold
minimum: 0
maximum: 7
- default: 0
qcom,tune-usb2-amplitude:
$ref: /schemas/types.yaml#/definitions/uint8
description: High-Speed transmit amplitude
minimum: 0
maximum: 15
- default: 8
qcom,tune-usb2-preem:
$ref: /schemas/types.yaml#/definitions/uint8
description: High-Speed TX pre-emphasis tuning
minimum: 0
maximum: 7
- default: 5
required:
- compatible
- renesas,usb2-phy-r9a07g054 # RZ/V2L
- const: renesas,rzg2l-usb2-phy
+ - items:
+ - const: renesas,usb2-phy-r9a09g056 # RZ/V2N
+ - const: renesas,usb2-phy-r9a09g057
+
reg:
maxItems: 1
- samsung,s5pv210-mipi-video-phy
- samsung,exynos5420-mipi-video-phy
- samsung,exynos5433-mipi-video-phy
+ - samsung,exynos7870-mipi-video-phy
"#phy-cells":
const: 1
deprecated: true
description:
Phandle to PMU system controller interface, valid for
- samsung,exynos5433-mipi-video-phy (if not a child of PMU).
+ samsung,exynos5433-mipi-video-phy and samsung,exynos7870-mipi-video-phy
+ (if not a child of PMU).
samsung,disp-sysreg:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to DISP system controller interface, valid for
- samsung,exynos5433-mipi-video-phy.
+ samsung,exynos5433-mipi-video-phy and samsung,exynos7870-mipi-video-phy.
samsung,cam0-sysreg:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to CAM0 system controller interface, valid for
- samsung,exynos5433-mipi-video-phy.
+ samsung,exynos5433-mipi-video-phy and samsung,exynos7870-mipi-video-phy.
samsung,cam1-sysreg:
$ref: /schemas/types.yaml#/definitions/phandle
samsung,disp-sysreg: false
samsung,cam0-sysreg: false
samsung,cam1-sysreg: false
- else:
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5433-mipi-video-phy
+ then:
properties:
syscon: false
required:
- samsung,cam0-sysreg
- samsung,cam1-sysreg
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos7870-mipi-video-phy
+ then:
+ properties:
+ syscon: false
+ samsung,cam1-sysreg: false
+ required:
+ - samsung,disp-sysreg
+ - samsung,cam0-sysreg
+
additionalProperties: false
examples:
- samsung,exynos7-usbdrd-phy
- samsung,exynos7870-usbdrd-phy
- samsung,exynos850-usbdrd-phy
+ - samsung,exynos990-usbdrd-phy
clocks:
minItems: 1
- samsung,exynos5420-usbdrd-phy
- samsung,exynos7870-usbdrd-phy
- samsung,exynos850-usbdrd-phy
+ - samsung,exynos990-usbdrd-phy
then:
properties:
clocks:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/st,spear1310-miphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST SPEAr miphy
+
+maintainers:
+ - Pratyush Anand <pratyush.anand@gmail.com>
+
+description:
+ ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
+
+properties:
+ compatible:
+ enum:
+ - st,spear1310-miphy
+ - st,spear1340-miphy
+
+ reg:
+ maxItems: 1
+
+ misc:
+ description: Phandle for the syscon node to access misc registers.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ '#phy-cells':
+ description: >
+ Cell[0] indicates interface type: 0 = SATA, 1 = PCIe.
+ const: 1
+
+ phy-id:
+ description: Instance id of the phy. Required when multiple PHYs are present.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - misc
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ miphy@1000 {
+ compatible = "st,spear1310-miphy";
+ reg = <0x1000 0x100>;
+ misc = <&syscon>;
+ #phy-cells = <1>;
+ phy-id = <0>;
+ };
+++ /dev/null
-ST SPEAr miphy DT details
-=========================
-
-ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
-
-Required properties:
-- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy"
-- reg : offset and length of the PHY register set.
-- misc: phandle for the syscon node to access misc registers
-- #phy-cells : from the generic PHY bindings, must be 1.
- - cell[1]: 0 if phy used for SATA, 1 for PCIe.
-
-Optional properties:
-- phy-id: Instance id of the phy. Only required when there are multiple phys
- present on a implementation.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,da830-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DA8xx/OMAP-L1xx/AM18xx USB PHY
+
+maintainers:
+ - David Lechner <david@lechnology.com>
+
+description: >
+ This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG
+ controllers on DA8xx SoCs.
+
+ It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon"
+ to access the CFGCHIP2 register.
+
+properties:
+ compatible:
+ items:
+ - const: ti,da830-usb-phy
+
+ '#phy-cells':
+ const: 1
+ description:
+ Consumers of this device should use index 0 for the USB 2.0 phy device and
+ index 1 for the USB 1.1 phy device.
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: usb0_clk48
+ - const: usb1_clk48
+
+required:
+ - compatible
+ - '#phy-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy {
+ compatible = "ti,da830-usb-phy";
+ #phy-cells = <1>;
+ clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+ clock-names = "usb0_clk48", "usb1_clk48";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,dm8168-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DM8168 USB PHY
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+properties:
+ compatible:
+ const: ti,dm8168-usb-phy
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: phy
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: refclk
+
+ '#phy-cells':
+ const: 0
+
+ syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle for the syscon node to access misc registers.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - '#phy-cells'
+ - syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy@20 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x20 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,keystone-usbphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Keystone USB PHY
+
+maintainers:
+ - Nishanth Menon <nm@ti.com>
+ - Santosh Shilimkar <ssantosh@kernel.org>
+
+description:
+ The main purpose of this PHY driver is to enable the USB PHY reference clock
+ gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just
+ an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3
+ phy node in the USB Glue layer driver node.
+
+properties:
+ compatible:
+ const: ti,keystone-usbphy
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy@2620738 {
+ compatible = "ti,keystone-usbphy";
+ reg = <0x2620738 32>;
+ };
properties:
compatible:
oneOf:
- - const: amlogic,pinctrl-a4
+ - enum:
+ - amlogic,pinctrl-a4
+ - amlogic,pinctrl-s6
+ - amlogic,pinctrl-s7
- items:
- enum:
- amlogic,pinctrl-a5
- const: amlogic,pinctrl-a4
+ - items:
+ - enum:
+ - amlogic,pinctrl-s7d
+ - const: amlogic,pinctrl-s7
"#address-cells":
const: 2
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/eswin,eic7700-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin Eic7700 Pinctrl
+
+maintainers:
+ - Yulin Lu <luyulin@eswincomputing.com>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+description: |
+ eic7700 pin configuration nodes act as a container for an arbitrary number of
+ subnodes. Each of these subnodes represents some desired configuration for one or
+ more pins. This configuration can include the mux function to select on those pin(s),
+ and various pin configuration parameters, such as input-enable, pull-up, etc.
+
+properties:
+ compatible:
+ const: eswin,eic7700-pinctrl
+
+ reg:
+ maxItems: 1
+
+ vrgmii-supply:
+ description:
+ Regulator supply for the RGMII interface IO power domain.
+ This property should reference a regulator that provides either 1.8V or 3.3V,
+ depending on the board-level voltage configuration required by the RGMII interface.
+
+patternProperties:
+ '-grp$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '-pins$':
+ type: object
+
+ properties:
+ pins:
+ description:
+ For eic7700, specifies the name(s) of one or more pins to be configured by
+ this node.
+ items:
+ enum: [ chip_mode, mode_set0, mode_set1, mode_set2, mode_set3, xin,
+ rst_out_n, key_reset_n, gpio0, por_sel, jtag0_tck, jtag0_tms,
+ jtag0_tdi, jtag0_tdo, gpio5, spi2_cs0_n, jtag1_tck, jtag1_tms,
+ jtag1_tdi, jtag1_tdo, gpio11, spi2_cs1_n, pcie_clkreq_n,
+ pcie_wake_n, pcie_perst_n, hdmi_scl, hdmi_sda, hdmi_cec,
+ jtag2_trst, rgmii0_clk_125, rgmii0_txen, rgmii0_txclk,
+ rgmii0_txd0, rgmii0_txd1, rgmii0_txd2, rgmii0_txd3, i2s0_bclk,
+ i2s0_wclk, i2s0_sdi, i2s0_sdo, i2s_mclk, rgmii0_rxclk,
+ rgmii0_rxdv, rgmii0_rxd0, rgmii0_rxd1, rgmii0_rxd2, rgmii0_rxd3,
+ i2s2_bclk, i2s2_wclk, i2s2_sdi, i2s2_sdo, gpio27, gpio28, gpio29,
+ rgmii0_mdc, rgmii0_mdio, rgmii0_intb, rgmii1_clk_125, rgmii1_txen,
+ rgmii1_txclk, rgmii1_txd0, rgmii1_txd1, rgmii1_txd2, rgmii1_txd3,
+ i2s1_bclk, i2s1_wclk, i2s1_sdi, i2s1_sdo, gpio34, rgmii1_rxclk,
+ rgmii1_rxdv, rgmii1_rxd0, rgmii1_rxd1, rgmii1_rxd2, rgmii1_rxd3,
+ spi1_cs0_n, spi1_clk, spi1_d0, spi1_d1, spi1_d2, spi1_d3, spi1_cs1_n,
+ rgmii1_mdc, rgmii1_mdio, rgmii1_intb, usb0_pwren, usb1_pwren,
+ i2c0_scl, i2c0_sda, i2c1_scl, i2c1_sda, i2c2_scl, i2c2_sda,
+ i2c3_scl, i2c3_sda, i2c4_scl, i2c4_sda, i2c5_scl, i2c5_sda,
+ uart0_tx, uart0_rx, uart1_tx, uart1_rx, uart1_cts, uart1_rts,
+ uart2_tx, uart2_rx, jtag2_tck, jtag2_tms, jtag2_tdi, jtag2_tdo,
+ fan_pwm, fan_tach, mipi_csi0_xvs, mipi_csi0_xhs, mipi_csi0_mclk,
+ mipi_csi1_xvs, mipi_csi1_xhs, mipi_csi1_mclk, mipi_csi2_xvs,
+ mipi_csi2_xhs, mipi_csi2_mclk, mipi_csi3_xvs, mipi_csi3_xhs,
+ mipi_csi3_mclk, mipi_csi4_xvs, mipi_csi4_xhs, mipi_csi4_mclk,
+ mipi_csi5_xvs, mipi_csi5_xhs, mipi_csi5_mclk, spi3_cs_n, spi3_clk,
+ spi3_di, spi3_do, gpio92, gpio93, s_mode, gpio95, spi0_cs_n,
+ spi0_clk, spi0_d0, spi0_d1, spi0_d2, spi0_d3, i2c10_scl,
+ i2c10_sda, i2c11_scl, i2c11_sda, gpio106, boot_sel0, boot_sel1,
+ boot_sel2, boot_sel3, gpio111, lpddr_ref_clk ]
+
+ function:
+ description:
+ Specify the alternative function to be configured for the
+ given pins.
+ enum: [ disabled, boot_sel, chip_mode, emmc, fan_tach,
+ gpio, hdmi, i2c, i2s, jtag, ddr_ref_clk_sel,
+ lpddr_ref_clk, mipi_csi, osc, pcie, pwm,
+ rgmii, reset, sata, sdio, spi, s_mode, uart, usb ]
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ bias-disable: true
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ input-enable: true
+
+ input-disable: true
+
+ drive-strength-microamp: true
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ - if:
+ properties:
+ pins:
+ anyOf:
+ - pattern: '^rgmii'
+ - const: lpddr_ref_clk
+ then:
+ properties:
+ drive-strength-microamp:
+ enum: [3000, 6000, 9000, 12000, 15000, 18000, 21000, 24000]
+ else:
+ properties:
+ drive-strength-microamp:
+ enum: [6000, 9000, 12000, 15000, 18000, 21000, 24000, 27000]
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pinctrl@51600080 {
+ compatible = "eswin,eic7700-pinctrl";
+ reg = <0x51600080 0x1fff80>;
+ vrgmii-supply = <&vcc_1v8>;
+
+ dev-active-grp {
+ /* group node defining 1 standard pin */
+ gpio10-pins {
+ pins = "jtag1_tdo";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+
+ /* group node defining 2 I2C pins */
+ i2c6-pins {
+ pins = "uart1_cts", "uart1_rts";
+ function = "i2c";
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8189-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8189 Pin Controller
+
+maintainers:
+ - Lei Xue <lei.xue@mediatek.com>
+ - Cathy Xu <ot_cathy.xu@mediatek.com>
+
+description:
+ The MediaTek's MT8189 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8189-pinctrl
+
+ reg:
+ items:
+ - description: gpio base
+ - description: lm group IO
+ - description: rb0 group IO
+ - description: rb1 group IO
+ - description: bm0 group IO
+ - description: bm1 group IO
+ - description: bm2 group IO
+ - description: lt0 group IO
+ - description: lt1 group IO
+ - description: rt group IO
+ - description: eint0 group IO
+ - description: eint1 group IO
+ - description: eint2 group IO
+ - description: eint3 group IO
+ - description: eint4 group IO
+
+ reg-names:
+ items:
+ - const: base
+ - const: lm
+ - const: rb0
+ - const: rb1
+ - const: bm0
+ - const: bm1
+ - const: bm2
+ - const: lt0
+ - const: lt1
+ - const: rt
+ - const: eint0
+ - const: eint1
+ - const: eint2
+ - const: eint3
+ - const: eint4
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-line-names: true
+
+# PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^pins':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+ additionalProperties: false
+ description:
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h
+ directly, for this SoC.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8189 pull down PUPD/R0/R1 type define value.
+ - enum: [75000, 5000]
+ description: mt8189 pull down RSEL type si unit value(ohm).
+ description: |
+ For pull down type is normal, it doesn't need add R1R0 define
+ and resistance value.
+
+ For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8189.
+
+ For pull down type is PD/RSEL, it can add resistance value(ohm)
+ to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8189 pull up PUPD/R0/R1 type define value.
+ - enum: [1000, 1500, 2000, 3000, 4000, 5000, 75000]
+ description: mt8189 pull up RSEL type si unit value(ohm).
+ description: |
+ For pull up type is normal, it don't need add R1R0 define
+ and resistance value.
+
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8189.
+
+ For pull up type is PU/RSEL, it can add resistance value(ohm)
+ to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/mt65xx.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #define PINMUX_GPIO51__FUNC_SCL0 (MTK_PIN_NO(51) | 2)
+ #define PINMUX_GPIO52__FUNC_SDA0 (MTK_PIN_NO(52) | 2)
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8189-pinctrl";
+ reg = <0x10005000 0x1000>,
+ <0x11b50000 0x1000>,
+ <0x11c50000 0x1000>,
+ <0x11c60000 0x1000>,
+ <0x11d20000 0x1000>,
+ <0x11d30000 0x1000>,
+ <0x11d40000 0x1000>,
+ <0x11e20000 0x1000>,
+ <0x11e30000 0x1000>,
+ <0x11f20000 0x1000>,
+ <0x11ce0000 0x1000>,
+ <0x11de0000 0x1000>,
+ <0x11e60000 0x1000>,
+ <0x1c01e000 0x1000>,
+ <0x11f00000 0x1000>;
+ reg-names = "base", "lm", "rb0", "rb1", "bm0" , "bm1",
+ "bm2", "lt0", "lt1", "rt", "eint0", "eint1",
+ "eint2", "eint3", "eint4";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 182>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO51__FUNC_SCL0>,
+ <PINMUX_GPIO52__FUNC_SDA0>;
+ bias-disable;
+ };
+ };
+ };
+++ /dev/null
-NXP LPC18xx/43xx SCU pin controller Device Tree Bindings
---------------------------------------------------------
-
-Required properties:
-- compatible : Should be "nxp,lpc1850-scu"
-- reg : Address and length of the register set for the device
-- clocks : Clock specifier (see clock bindings for details)
-
-The lpc1850-scu driver uses the generic pin multiplexing and generic pin
-configuration documented in pinctrl-bindings.txt.
-
-The following generic nodes are supported:
- - function
- - pins
- - bias-disable
- - bias-pull-up
- - bias-pull-down
- - drive-strength
- - input-enable
- - input-disable
- - input-schmitt-enable
- - input-schmitt-disable
- - slew-rate
-
-NXP specific properties:
- - nxp,gpio-pin-interrupt : Assign pin to gpio pin interrupt controller
- irq number 0 to 7. See example below.
-
-Not all pins support all properties so either refer to the NXP 1850/4350
-user manual or the pin table in the pinctrl-lpc18xx driver for supported
-pin properties.
-
-Example:
-pinctrl: pinctrl@40086000 {
- compatible = "nxp,lpc1850-scu";
- reg = <0x40086000 0x1000>;
- clocks = <&ccu1 CLK_CPU_SCU>;
-
- i2c0_pins: i2c0-pins {
- i2c0_pins_cfg {
- pins = "i2c0_scl", "i2c0_sda";
- function = "i2c0";
- input-enable;
- };
- };
-
- uart0_pins: uart0-pins {
- uart0_rx_cfg {
- pins = "pf_11";
- function = "uart0";
- bias-disable;
- input-enable;
- };
-
- uart0_tx_cfg {
- pins = "pf_10";
- function = "uart0";
- bias-disable;
- };
- };
-
- gpio_joystick_pins: gpio-joystick-pins {
- gpio_joystick_1_cfg {
- pins = "p9_0";
- function = "gpio";
- nxp,gpio-pin-interrupt = <0>;
- input-enable;
- bias-disable;
- };
- };
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,lpc1850-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx/43xx SCU pin controller
+
+description:
+ Not all pins support all pin generic node properties so either refer to
+ the NXP 1850/4350 user manual or the pin table in the pinctrl-lpc18xx
+ driver for supported pin properties.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-scu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '_cfg$':
+ type: object
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ unevaluatedProperties: false
+
+ properties:
+ nxp,gpio-pin-interrupt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ description:
+ Assign pin to gpio pin interrupt controller
+ irq number 0 to 7. See example below.
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ pinctrl@40086000 {
+ compatible = "nxp,lpc1850-scu";
+ reg = <0x40086000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_SCU>;
+
+ gpio-joystick-pins {
+ gpio-joystick-1_cfg {
+ pins = "p9_0";
+ function = "gpio";
+ nxp,gpio-pin-interrupt = <0>;
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,milos-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Milos TLMM block
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm Milos SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,milos-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 84
+
+ gpio-line-names:
+ maxItems: 167
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-milos-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-milos-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-milos-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-5][0-9]|16[0-7])$"
+ - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+ audio_ext_mclk1, audio_ref_clk, cam_mclk, cci_async_in0,
+ cci_i2c_scl, cci_i2c_sda, cci_timer, coex_uart1_rx,
+ coex_uart1_tx, dbg_out_clk, ddr_bist_complete, ddr_bist_fail,
+ ddr_bist_start, ddr_bist_stop, ddr_pxi0, ddr_pxi1, dp0_hot,
+ egpio, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, i2s0_data0,
+ i2s0_data1, i2s0_sck, i2s0_ws, ibi_i3c, jitter_bist, mdp_vsync,
+ mdp_vsync0_out, mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
+ mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk_req_n,
+ pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux,
+ prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+ qdss_gpio, qlink0_enable, qlink0_request, qlink0_wmss,
+ qlink1_enable, qlink1_request, qlink1_wmss, qspi0, qup0_se0,
+ qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, qup0_se6,
+ qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5,
+ qup1_se6, resout_gpio_n, sd_write_protect, sdc1_clk, sdc1_cmd,
+ sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data,
+ sdc2_fb_clk, tb_trig_sdc1, tb_trig_sdc2, tgu_ch0_trigout,
+ tgu_ch1_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
+ tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data,
+ uim0_present, uim0_reset, uim1_clk_mira, uim1_clk_mirb,
+ uim1_data_mira, uim1_data_mirb, uim1_present_mira,
+ uim1_present_mirb, uim1_reset_mira, uim1_reset_mirb, usb0_hs,
+ usb0_phy_ps, vfr_0, vfr_1, vsense_trigger_mirnat, wcn_sw,
+ wcn_sw_ctrl ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,milos-tlmm";
+ reg = <0x0f100000 0x300000>;
+
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-ranges = <&tlmm 0 0 168>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ qup-uart5-default-state {
+ pins = "gpio25", "gpio26";
+ function = "qup0_se5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+...
- qcom,pm6450-gpio
- qcom,pm7250b-gpio
- qcom,pm7325-gpio
+ - qcom,pm7550-gpio
- qcom,pm7550ba-gpio
- qcom,pm8005-gpio
- qcom,pm8018-gpio
- qcom,pmi8994-gpio
- qcom,pmi8998-gpio
- qcom,pmih0108-gpio
+ - qcom,pmiv0104-gpio
- qcom,pmk8350-gpio
- qcom,pmk8550-gpio
- qcom,pmm8155au-gpio
- qcom,pmc8180-gpio
- qcom,pmc8380-gpio
- qcom,pmi8994-gpio
+ - qcom,pmiv0104-gpio
- qcom,pmm8155au-gpio
then:
properties:
- qcom,pm660l-gpio
- qcom,pm6150l-gpio
- qcom,pm7250b-gpio
+ - qcom,pm7550-gpio
- qcom,pm8038-gpio
- qcom,pm8150b-gpio
- qcom,pm8150l-gpio
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule
+
+maintainers:
+ - A. della Porta <andrea.porta@suse.com>
+
+description:
+ The RP1 chipset is a Multi Function Device containing, among other
+ sub-peripherals, a gpio/pinconf/mux controller whose 54 pins are grouped
+ into 3 banks.
+ It works also as an interrupt controller for those gpios.
+
+properties:
+ compatible:
+ const: raspberrypi,rp1-gpio
+
+ reg:
+ maxItems: 3
+ description: One reg specifier for each one of the 3 pin banks.
+
+ '#gpio-cells':
+ description: The first cell is the pin number and the second cell is used
+ to specify the flags (see include/dt-bindings/gpio/gpio.h).
+ const: 2
+
+ gpio-controller: true
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-line-names:
+ maxItems: 54
+
+ interrupts:
+ maxItems: 3
+ description: One interrupt specifier for each one of the 3 pin banks.
+
+ '#interrupt-cells':
+ description:
+ Specifies the Bank number [0, 1, 2] and Flags as defined in
+ include/dt-bindings/interrupt-controller/irq.h.
+ const: 2
+
+ interrupt-controller: true
+
+patternProperties:
+ '-state$':
+ oneOf:
+ - $ref: '#/$defs/raspberrypi-rp1-state'
+ - patternProperties:
+ '-pins$':
+ $ref: '#/$defs/raspberrypi-rp1-state'
+ additionalProperties: false
+
+$defs:
+ raspberrypi-rp1-state:
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ Pin controller client devices use pin configuration subnodes (children
+ and grandchildren) for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: '^gpio([0-9]|[1-4][0-9]|5[0-3])$'
+
+ function:
+ enum: [ alt0, alt1, alt2, alt3, alt4, gpio, alt6, alt7, alt8, none,
+ aaud, dcd0, dpi, dsi0_te_ext, dsi1_te_ext, dsr0, dtr0, gpclk0,
+ gpclk1, gpclk2, gpclk3, gpclk4, gpclk5, i2c0, i2c1, i2c2, i2c3,
+ i2c4, i2c5, i2c6, i2s0, i2s1, i2s2, ir, mic, pcie_clkreq_n,
+ pio, proc_rio, pwm0, pwm1, ri0, sd0, sd1, spi0, spi1, spi2,
+ spi3, spi4, spi5, spi6, spi7, spi8, uart0, uart1, uart2, uart3,
+ uart4, uart5, vbus0, vbus1, vbus2, vbus3 ]
+
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ input-enable: true
+ input-schmitt-enable: true
+ output-enable: true
+ output-high: true
+ output-low: true
+ slew-rate:
+ description: 0 is slow slew rate, 1 is fast slew rate
+ enum: [ 0, 1 ]
+ drive-strength:
+ enum: [ 2, 4, 8, 12 ]
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - reg
+ - compatible
+ - '#gpio-cells'
+ - gpio-controller
+ - interrupts
+ - '#interrupt-cells'
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ rp1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rp1_gpio: pinctrl@c0400d0000 {
+ reg = <0xc0 0x400d0000 0x0 0xc000>,
+ <0xc0 0x400e0000 0x0 0xc000>,
+ <0xc0 0x400f0000 0x0 0xc000>;
+ compatible = "raspberrypi,rp1-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-line-names =
+ "ID_SDA", // GPIO0
+ "ID_SCL", // GPIO1
+ "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6",
+ "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11",
+ "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16",
+ "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21",
+ "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26",
+ "GPIO27",
+ "PCIE_RP1_WAKE", // GPIO28
+ "FAN_TACH", // GPIO29
+ "HOST_SDA", // GPIO30
+ "HOST_SCL", // GPIO31
+ "ETH_RST_N", // GPIO32
+ "", // GPIO33
+ "CD0_IO0_MICCLK", // GPIO34
+ "CD0_IO0_MICDAT0", // GPIO35
+ "RP1_PCIE_CLKREQ_N", // GPIO36
+ "", // GPIO37
+ "CD0_SDA", // GPIO38
+ "CD0_SCL", // GPIO39
+ "CD1_SDA", // GPIO40
+ "CD1_SCL", // GPIO41
+ "USB_VBUS_EN", // GPIO42
+ "USB_OC_N", // GPIO43
+ "RP1_STAT_LED", // GPIO44
+ "FAN_PWM", // GPIO45
+ "CD1_IO0_MICCLK", // GPIO46
+ "2712_WAKE", // GPIO47
+ "CD1_IO1_MICDAT1", // GPIO48
+ "EN_MAX_USB_CUR", // GPIO49
+ "", // GPIO50
+ "", // GPIO51
+ "", // GPIO52
+ ""; // GPIO53
+
+ rp1-i2s0-default-state {
+ function = "i2s0";
+ pins = "gpio18", "gpio19", "gpio20", "gpio21";
+ bias-disable;
+ };
+
+ rp1-uart0-default-state {
+ txd-pins {
+ function = "uart0";
+ pins = "gpio14";
+ bias-disable;
+ };
+
+ rxd-pins {
+ function = "uart0";
+ pins = "gpio15";
+ bias-pull-up;
+ };
+ };
+ };
+ };
description:
Pin bank index.
- minimum: 0
- maximum: 13
+ maximum: 14
description:
Mux 0 means GPIO and mux 1 to N means
the specific device function.
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) STMicroelectronics 2025.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/st,stm32-hdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Hardware Debug Port Mux/Config
+
+maintainers:
+ - Clément LE GOFFIC <legoffic.clement@gmail.com>
+
+description:
+ STMicroelectronics's STM32 MPUs integrate a Hardware Debug Port (HDP).
+ It allows to output internal signals on SoC's GPIO.
+
+properties:
+ compatible:
+ enum:
+ - st,stm32mp131-hdp
+ - st,stm32mp151-hdp
+ - st,stm32mp251-hdp
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+patternProperties:
+ "^hdp[0-7]-pins$":
+ type: object
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ pins:
+ pattern: '^HDP[0-7]$'
+
+ function: true
+
+ required:
+ - function
+ - pins
+
+allOf:
+ - $ref: pinctrl.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp131-hdp
+ then:
+ patternProperties:
+ "^hdp[0-7]-pins$":
+ properties:
+ function:
+ enum: [ pwr_pwrwake_sys, pwr_stop_forbidden, pwr_stdby_wakeup, pwr_encomp_vddcore,
+ bsec_out_sec_niden, aiec_sys_wakeup, none, ddrctrl_lp_req,
+ pwr_ddr_ret_enable_n, dts_clk_ptat, sram3ctrl_tamp_erase_act, gpoval0,
+ pwr_sel_vth_vddcpu, pwr_mpu_ram_lowspeed, ca7_naxierrirq, pwr_okin_mr,
+ bsec_out_sec_dbgen, aiec_c1_wakeup, rcc_pwrds_mpu, ddrctrl_dfi_ctrlupd_req,
+ ddrctrl_cactive_ddrc_asr, sram3ctrl_hw_erase_act, nic400_s0_bready, gpoval1,
+ pwr_pwrwake_mpu, pwr_mpu_clock_disable_ack, ca7_ndbgreset_i,
+ bsec_in_rstcore_n, bsec_out_sec_bsc_dis, ddrctrl_dfi_init_complete,
+ ddrctrl_perf_op_is_refresh, ddrctrl_gskp_dfi_lp_req, sram3ctrl_sw_erase_act,
+ nic400_s0_bvalid, gpoval2, pwr_sel_vth_vddcore, pwr_mpu_clock_disable_req,
+ ca7_npmuirq0, ca7_nfiqout0, bsec_out_sec_dftlock, bsec_out_sec_jtag_dis,
+ rcc_pwrds_sys, sram3ctrl_tamp_erase_req, ddrctrl_stat_ddrc_reg_selfref_type0,
+ dts_valobus1_0, dts_valobus2_0, tamp_potential_tamp_erfcfg, nic400_s0_wready,
+ nic400_s0_rready, gpoval3, pwr_stop2_active, ca7_nl2reset_i,
+ ca7_npreset_varm_i, bsec_out_sec_dften, bsec_out_sec_dbgswenable,
+ eth1_out_pmt_intr_o, eth2_out_pmt_intr_o, ddrctrl_stat_ddrc_reg_selfref_type1,
+ ddrctrl_cactive_0, dts_valobus1_1, dts_valobus2_1, tamp_nreset_sram_ercfg,
+ nic400_s0_wlast, nic400_s0_rlast, gpoval4, ca7_standbywfil2,
+ pwr_vth_vddcore_ack, ca7_ncorereset_i, ca7_nirqout0, bsec_in_pwrok,
+ bsec_out_sec_deviceen, eth1_out_lpi_intr_o, eth2_out_lpi_intr_o,
+ ddrctrl_cactive_ddrc, ddrctrl_wr_credit_cnt, dts_valobus1_2, dts_valobus2_2,
+ pka_pka_itamp_out, nic400_s0_wvalid, nic400_s0_rvalid, gpoval5,
+ ca7_standbywfe0, pwr_vth_vddcpu_ack, ca7_evento, bsec_in_tamper_det,
+ bsec_out_sec_spniden, eth1_out_mac_speed_o1, eth2_out_mac_speed_o1,
+ ddrctrl_csysack_ddrc, ddrctrl_lpr_credit_cnt, dts_valobus1_3, dts_valobus2_3,
+ saes_tamper_out, nic400_s0_awready, nic400_s0_arready, gpoval6,
+ ca7_standbywfi0, pwr_rcc_vcpu_rdy, ca7_eventi, ca7_dbgack0, bsec_out_fuse_ok,
+ bsec_out_sec_spiden, eth1_out_mac_speed_o0, eth2_out_mac_speed_o0,
+ ddrctrl_csysreq_ddrc, ddrctrl_hpr_credit_cnt, dts_valobus1_4, dts_valobus2_4,
+ rng_tamper_out, nic400_s0_awavalid, nic400_s0_aravalid, gpoval7 ]
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp151-hdp
+ then:
+ patternProperties:
+ "^hdp[0-7]-pins$":
+ properties:
+ function:
+ enum: [ pwr_pwrwake_sys, cm4_sleepdeep, pwr_stdby_wkup, pwr_encomp_vddcore,
+ bsec_out_sec_niden, none, rcc_cm4_sleepdeep, gpu_dbg7, ddrctrl_lp_req,
+ pwr_ddr_ret_enable_n, dts_clk_ptat, gpoval0, pwr_pwrwake_mcu, cm4_halted,
+ ca7_naxierrirq, pwr_okin_mr, bsec_out_sec_dbgen, exti_sys_wakeup,
+ rcc_pwrds_mpu, gpu_dbg6, ddrctrl_dfi_ctrlupd_req, ddrctrl_cactive_ddrc_asr,
+ gpoval1, pwr_pwrwake_mpu, cm4_rxev, ca7_npmuirq1, ca7_nfiqout1,
+ bsec_in_rstcore_n, exti_c2_wakeup, rcc_pwrds_mcu, gpu_dbg5,
+ ddrctrl_dfi_init_complete, ddrctrl_perf_op_is_refresh,
+ ddrctrl_gskp_dfi_lp_req, gpoval2, pwr_sel_vth_vddcore, cm4_txev, ca7_npmuirq0,
+ ca7_nfiqout0, bsec_out_sec_dftlock, exti_c1_wakeup, rcc_pwrds_sys, gpu_dbg4,
+ ddrctrl_stat_ddrc_reg_selfref_type0, ddrctrl_cactive_1, dts_valobus1_0,
+ dts_valobus2_0, gpoval3, pwr_mpu_pdds_not_cstbydis, cm4_sleeping, ca7_nreset1,
+ ca7_nirqout1, bsec_out_sec_dften, bsec_out_sec_dbgswenable,
+ eth_out_pmt_intr_o, gpu_dbg3, ddrctrl_stat_ddrc_reg_selfref_type1,
+ ddrctrl_cactive_0, dts_valobus1_1, dts_valobus2_1, gpoval4, ca7_standbywfil2,
+ pwr_vth_vddcore_ack, ca7_nreset0, ca7_nirqout0, bsec_in_pwrok,
+ bsec_out_sec_deviceen, eth_out_lpi_intr_o, gpu_dbg2, ddrctrl_cactive_ddrc,
+ ddrctrl_wr_credit_cnt, dts_valobus1_2, dts_valobus2_2, gpoval5,
+ ca7_standbywfi1, ca7_standbywfe1, ca7_evento, ca7_dbgack1,
+ bsec_out_sec_spniden, eth_out_mac_speed_o1, gpu_dbg1, ddrctrl_csysack_ddrc,
+ ddrctrl_lpr_credit_cnt, dts_valobus1_3, dts_valobus2_3, gpoval6,
+ ca7_standbywfi0, ca7_standbywfe0, ca7_dbgack0, bsec_out_fuse_ok,
+ bsec_out_sec_spiden, eth_out_mac_speed_o0, gpu_dbg0, ddrctrl_csysreq_ddrc,
+ ddrctrl_hpr_credit_cnt, dts_valobus1_4, dts_valobus2_4, gpoval7 ]
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp251-hdp
+ then:
+ patternProperties:
+ "^hdp[0-7]-pins$":
+ properties:
+ function:
+ enum: [ pwr_pwrwake_sys, cpu2_sleep_deep, bsec_out_tst_sdr_unlock_or_disable_scan,
+ bsec_out_nidenm, bsec_out_nidena, cpu2_state_0, rcc_pwrds_sys, gpu_dbg7,
+ ddrss_csysreq_ddrc, ddrss_dfi_phyupd_req, cpu3_sleep_deep,
+ d2_gbl_per_clk_bus_req, pcie_usb_cxpl_debug_info_ei_0,
+ pcie_usb_cxpl_debug_info_ei_8, d3_state_0, gpoval0, pwr_pwrwake_cpu2,
+ cpu2_halted, cpu2_state_1, bsec_out_dbgenm, bsec_out_dbgena, exti1_sys_wakeup,
+ rcc_pwrds_cpu2, gpu_dbg6, ddrss_csysack_ddrc, ddrss_dfi_phymstr_req,
+ cpu3_halted, d2_gbl_per_dma_req, pcie_usb_cxpl_debug_info_ei_1,
+ pcie_usb_cxpl_debug_info_ei_9, d3_state_1, gpoval1, pwr_pwrwake_cpu1,
+ cpu2_rxev, cpu1_npumirq1, cpu1_nfiqout1, bsec_out_shdbgen, exti1_cpu2_wakeup,
+ rcc_pwrds_cpu1, gpu_dbg5, ddrss_cactive_ddrc, ddrss_dfi_lp_req, cpu3_rxev,
+ hpdma1_clk_bus_req, pcie_usb_cxpl_debug_info_ei_2,
+ pcie_usb_cxpl_debug_info_ei_10, d3_state_2, gpoval2, pwr_sel_vth_vddcpu,
+ cpu2_txev, cpu1_npumirq0, cpu1_nfiqout0, bsec_out_ddbgen, exti1_cpu1_wakeup,
+ cpu3_state_0, gpu_dbg4, ddrss_mcdcg_en, ddrss_dfi_freq_0, cpu3_txev,
+ hpdma2_clk_bus_req, pcie_usb_cxpl_debug_info_ei_3,
+ pcie_usb_cxpl_debug_info_ei_11, d1_state_0, gpoval3, pwr_sel_vth_vddcore,
+ cpu2_sleeping, cpu1_evento, cpu1_nirqout1, bsec_out_spnidena, exti2_d3_wakeup,
+ eth1_out_pmt_intr_o, gpu_dbg3, ddrss_dphycg_en, ddrss_obsp0, cpu3_sleeping,
+ hpdma3_clk_bus_req, pcie_usb_cxpl_debug_info_ei_4,
+ pcie_usb_cxpl_debug_info_ei_12, d1_state_1, gpoval4, cpu1_standby_wfil2,
+ none, cpu1_nirqout0, bsec_out_spidena, exti2_cpu3_wakeup, eth1_out_lpi_intr_o,
+ gpu_dbg2, ddrctrl_dfi_init_start, ddrss_obsp1, cpu3_state_1,
+ d3_gbl_per_clk_bus_req, pcie_usb_cxpl_debug_info_ei_5,
+ pcie_usb_cxpl_debug_info_ei_13, d1_state_2, gpoval5, cpu1_standby_wfi1,
+ cpu1_standby_wfe1, cpu1_halted1, cpu1_naxierrirq, bsec_out_spnidenm,
+ exti2_cpu2_wakeup, eth2_out_pmt_intr_o, gpu_dbg1, ddrss_dfi_init_complete,
+ ddrss_obsp2, d2_state_0, d3_gbl_per_dma_req, pcie_usb_cxpl_debug_info_ei_6,
+ pcie_usb_cxpl_debug_info_ei_14, cpu1_state_0, gpoval6, cpu1_standby_wfi0,
+ cpu1_standby_wfe0, cpu1_halted0, bsec_out_spidenm, exti2_cpu1__wakeup,
+ eth2_out_lpi_intr_o, gpu_dbg0, ddrss_dfi_ctrlupd_req, ddrss_obsp3, d2_state_1,
+ lpdma1_clk_bus_req, pcie_usb_cxpl_debug_info_ei_7,
+ pcie_usb_cxpl_debug_info_ei_15, cpu1_state_1, gpoval7 ]
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+
+ pinctrl@54090000 {
+ compatible = "st,stm32mp151-hdp";
+ reg = <0x54090000 0x400>;
+ clocks = <&rcc HDP>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdp2_gpo>;
+ hdp2_gpo: hdp2-pins {
+ function = "gpoval2";
+ pins = "HDP2";
+ };
+ };
'#address-cells':
const: 1
+
'#size-cells':
const: 1
ranges: true
+
pins-are-numbered:
$ref: /schemas/types.yaml#/definitions/flag
deprecated: true
+
hwlocks: true
interrupts:
additionalProperties: false
properties:
gpio-controller: true
+
'#gpio-cells':
const: 2
+
interrupt-controller: true
'#interrupt-cells':
const: 2
reg:
maxItems: 1
+
clocks:
maxItems: 1
+
resets:
maxItems: 1
+
gpio-line-names: true
+
gpio-ranges:
minItems: 1
maxItems: 16
+
ngpios:
description:
Number of available gpios in a bank.
* ...
* 16 : Alternate Function 15
* 17 : Analog
+ * 18 : Reserved
To simplify the usage, macro is available to generate "pinmux" field.
This macro is available here:
- include/dt-bindings/pinctrl/stm32-pinfunc.h
+ Setting the pinmux's function to the Reserved (RSVD) value is used to inform
+ the driver that it shall not apply the mux setting. This can be used to
+ reserve some pins, for example to a co-processor not running Linux.
Some examples of using macro:
/* GPIO A9 set as alternate function 2 */
... {
... {
pinmux = <STM32_PINMUX('A', 9, ANALOG)>;
};
+ /* GPIO A9 reserved for co-processor */
+ ... {
+ pinmux = <STM32_PINMUX('A', 9, RSVD)>;
+ };
bias-disable:
type: boolean
+
bias-pull-down:
type: boolean
+
bias-pull-up:
type: boolean
+
drive-push-pull:
type: boolean
+
drive-open-drain:
type: boolean
+
output-low:
type: boolean
+
output-high:
type: boolean
+
slew-rate:
description: |
0: Low speed
properties:
compatible:
enum:
- - allwinner,sun20i-d1-ppu
- allwinner,sun8i-v853-ppu
+ - allwinner,sun20i-d1-ppu
+ - allwinner,sun55i-a523-pck-600
+ - allwinner,sun55i-a523-ppu
reg:
maxItems: 1
title: Generic PM domains
maintainers:
- - Rafael J. Wysocki <rjw@rjwysocki.net>
+ - Rafael J. Wysocki <rafael@kernel.org>
- Kevin Hilman <khilman@kernel.org>
- Ulf Hansson <ulf.hansson@linaro.org>
compatible:
oneOf:
- enum:
+ - qcom,glymur-rpmhpd
- qcom,mdm9607-rpmpd
+ - qcom,milos-rpmhpd
- qcom,msm8226-rpmpd
- qcom,msm8909-rpmpd
- qcom,msm8916-rpmpd
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/apple,smc-reboot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SMC Reboot Controller
+
+description:
+ The Apple System Management Controller (SMC) provides reboot functionality
+ on Apple Silicon SoCs. It uses NVMEM cells to store and track various
+ system state information related to boot, shutdown, and panic events.
+
+maintainers:
+ - Sven Peter <sven@kernel.org>
+
+properties:
+ compatible:
+ const: apple,smc-reboot
+
+ nvmem-cells:
+ items:
+ - description: Flag indicating shutdown (as opposed to reboot)
+ - description: Stage at which the boot process stopped (0x30 for normal boot)
+ - description: Counter for boot errors
+ - description: Counter for system panics
+
+ nvmem-cell-names:
+ items:
+ - const: shutdown_flag
+ - const: boot_stage
+ - const: boot_error_count
+ - const: panic_count
+
+required:
+ - compatible
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
examples:
- |
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/input/linux-event-codes.h>
- #include <dt-bindings/spmi/spmi.h>
-
- spmi@c440000 {
- reg = <0x0c440000 0x1100>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- pmic@0 {
- reg = <0x0 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pon@800 {
- compatible = "qcom,pm8998-pon";
- reg = <0x800>;
-
- pwrkey {
- compatible = "qcom,pm8941-pwrkey";
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_POWER>;
- };
-
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
- };
- };
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/linux-event-codes.h>
+ #include <dt-bindings/spmi/spmi.h>
+
+ spmi@c440000 {
+ reg = <0x0c440000 0x1100>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ pmic@0 {
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pon@800 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x800>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+ };
...
- rockchip,rk3366-power-controller
- rockchip,rk3368-power-controller
- rockchip,rk3399-power-controller
+ - rockchip,rk3528-power-controller
- rockchip,rk3562-power-controller
- rockchip,rk3568-power-controller
- rockchip,rk3576-power-controller
battery device.
monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
description: |
phandle to a "simple-battery" compatible node.
minimum: 50000
maximum: 500000
- monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to the battery node being monitored
+ monitored-battery: true
required:
- compatible
- reg
- monitored-battery
+allOf:
+ - $ref: power-supply.yaml#
+
additionalProperties: false
examples:
minimum: 100000
maximum: 3200000
- monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to the battery node being monitored
+ monitored-battery: true
interrupts:
maxItems: 1
- monitored-battery
allOf:
+ - $ref: power-supply.yaml#
- if:
properties:
compatible:
description: |
Indicates that the device state has changed.
- monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to the battery node being monitored
+ monitored-battery: true
required:
- compatible
minItems: 1
maxItems: 8 # Should be enough
- monitored-battery:
- description:
- Specifies the phandle of a simple-battery connected to this gauge
- $ref: /schemas/types.yaml#/definitions/phandle
+ monitored-battery: true
required:
- compatible
- const: usbin_i
- const: usbin_v
- monitored-battery:
- description: phandle to the simple-battery node
- $ref: /schemas/types.yaml#/definitions/phandle
+ monitored-battery: true
required:
- compatible
- io-channel-names
- monitored-battery
+allOf:
+ - $ref: power-supply.yaml#
+
additionalProperties: false
examples:
const: richtek,rt5033-charger
monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
description: |
Phandle to the monitored battery according to battery.yaml. The battery
node needs to contain five parameters.
required:
- monitored-battery
+allOf:
+ - $ref: power-supply.yaml#
+
additionalProperties: false
examples:
compatible:
const: stericsson,ab8500-btemp
- monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to battery node
+ monitored-battery: true
battery:
$ref: /schemas/types.yaml#/definitions/phandle
compatible:
const: stericsson,ab8500-chargalg
- monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to battery node
+ monitored-battery: true
battery:
$ref: /schemas/types.yaml#/definitions/phandle
compatible:
const: stericsson,ab8500-charger
- monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to battery node
+ monitored-battery: true
battery:
$ref: /schemas/types.yaml#/definitions/phandle
compatible:
const: stericsson,ab8500-fg
- monitored-battery:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to battery node
+ monitored-battery: true
battery:
$ref: /schemas/types.yaml#/definitions/phandle
interrupts:
maxItems: 1
- monitored-battery:
- description: phandle to the battery node
- $ref: /schemas/types.yaml#/definitions/phandle
+ monitored-battery: true
summit,enable-usb-charging:
type: boolean
unevaluatedProperties: false
allOf:
+ - $ref: power-supply.yaml#
- if:
properties:
compatible:
- const: x-powers,axp813-battery-power-supply
- const: x-powers,axp813-battery-power-supply
- monitored-battery:
- description:
- Specifies the phandle of an optional simple-battery connected to
- this gauge.
- $ref: /schemas/types.yaml#/definitions/phandle
+ monitored-battery: true
x-powers,no-thermistor:
type: boolean
+++ /dev/null
-* Freescale MSI interrupt controller
-
-Required properties:
-- compatible : compatible list, may contain one or two entries
- The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
- etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
- "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
- version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
- provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
- should be used. The first entry is optional; the second entry is
- required.
-
-- reg : It may contain one or two regions. The first region should contain
- the address and the length of the shared message interrupt register set.
- The second region should contain the address of aliased MSIIR or MSIIR1
- register for platforms that have such an alias, if using MSIIR1, the second
- region must be added because different MSI group has different MSIIR1 offset.
-
-- interrupts : each one of the interrupts here is one entry per 32 MSIs,
- and routed to the host interrupt controller. the interrupts should
- be set as edge sensitive. If msi-available-ranges is present, only
- the interrupts that correspond to available ranges shall be present.
-
-Optional properties:
-- msi-available-ranges: use <start count> style section to define which
- msi interrupt can be used in the 256 msi interrupts. This property is
- optional, without this, all the MSI interrupts can be used.
- Each available range must begin and end on a multiple of 32 (i.e.
- no splitting an individual MSI register or the associated PIC interrupt).
- MPIC v4.3 does not support this property because the 32 interrupts of an
- individual register are not continuous when using MSIIR1.
-
-- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
- is used for MSI messaging. The address of MSIIR in PCI address space is
- the MSI message address.
-
- This property may be used in virtualized environments where the hypervisor
- has created an alternate mapping for the MSIR block. See below for an
- explanation.
-
-
-Example:
- msi@41600 {
- compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- msi@41600 {
- compatible = "fsl,mpic-msi-v4.3";
- reg = <0x41600 0x200 0x44148 4>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0
- 0x100 0 0 0
- 0x101 0 0 0
- 0x102 0 0 0
- 0x103 0 0 0
- 0x104 0 0 0
- 0x105 0 0 0
- 0x106 0 0 0
- 0x107 0 0 0>;
- };
-
-The Freescale hypervisor and msi-address-64
--------------------------------------------
-Normally, PCI devices have access to all of CCSR via an ATMU mapping. The
-Freescale MSI driver calculates the address of MSIIR (in the MSI register
-block) and sets that address as the MSI message address.
-
-In a virtualized environment, the hypervisor may need to create an IOMMU
-mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement
-because of hardware limitations of the Peripheral Access Management Unit
-(PAMU), which is currently the only IOMMU that the hypervisor supports.
-The ATMU is programmed with the guest physical address, and the PAMU
-intercepts transactions and reroutes them to the true physical address.
-
-In the PAMU, each PCI controller is given only one primary window. The
-PAMU restricts DMA operations so that they can only occur within a window.
-Because PCI devices must be able to DMA to memory, the primary window must
-be used to cover all of the guest's memory space.
-
-PAMU primary windows can be divided into 256 subwindows, and each
-subwindow can have its own address mapping ("guest physical" to "true
-physical"). However, each subwindow has to have the same alignment, which
-means they cannot be located at just any address. Because of these
-restrictions, it is usually impossible to create a 4KB subwindow that
-covers MSIIR where it's normally located.
-
-Therefore, the hypervisor has to create a subwindow inside the same
-primary window used for memory, but mapped to the MSIR block (where MSIIR
-lives). The first subwindow after the end of guest memory is used for
-this. The address specified in the msi-address-64 property is the PCI
-address of MSIIR. The hypervisor configures the PAMU to map that address to
-the true physical address of MSIIR.
- interrupt-controller
- interrupts : should contain the cascade interrupt of the "flipper" pic
-1.l) The General Purpose I/O (GPIO) controller node
-
- see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
-
1.m) The control node
Represents the control interface used to setup several miscellaneous
The Analog Devices AXI PWM generator can generate PWM signals
with variable pulse width and period.
- https://wiki.analog.com/resources/fpga/docs/axi_pwm_gen
+ https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html
allOf:
- $ref: pwm.yaml#
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/argon40,fan-hat.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Argon40 Fan HAT PWM controller
+
+maintainers:
+ - Marek Vasut <marek.vasut+renesas@mailbox.org>
+
+description:
+ The trivial PWM on Argon40 Fan HAT, which is a RaspberryPi blower fan
+ hat which can be controlled over I2C, generates a fixed 30 kHz period
+ PWM signal with configurable 0..100% duty cycle to control the fan
+ speed.
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ const: argon40,fan-hat
+
+ reg:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 3
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwm@1a {
+ compatible = "argon40,fan-hat";
+ reg = <0x1a>;
+ #pwm-cells = <3>;
+ };
+ };
+++ /dev/null
-* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver
-
-Required properties:
- - compatible: Should be "nxp,lpc1850-sct-pwm"
- - reg: Should contain physical base address and length of pwm registers.
- - clocks: Must contain an entry for each entry in clock-names.
- See ../clock/clock-bindings.txt for details.
- - clock-names: Must include the following entries.
- - pwm: PWM operating clock.
- - #pwm-cells: Should be 3. See pwm.yaml in this directory for the description
- of the cells format.
-
-Example:
- pwm: pwm@40000000 {
- compatible = "nxp,lpc1850-sct-pwm";
- reg = <0x40000000 0x1000>;
- clocks =<&ccu1 CLK_CPU_SCT>;
- clock-names = "pwm";
- #pwm-cells = <3>;
- };
+++ /dev/null
-LPC32XX PWM controller
-
-Required properties:
-- compatible: should be "nxp,lpc3220-pwm"
-- reg: physical base address and length of the controller's registers
-
-Examples:
-
-pwm@4005c000 {
- compatible = "nxp,lpc3220-pwm";
- reg = <0x4005c000 0x4>;
-};
-
-pwm@4005c004 {
- compatible = "nxp,lpc3220-pwm";
- reg = <0x4005c004 0x4>;
-};
allOf:
- $ref: pwm.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: spacemit,k1-pwm
+ then:
+ properties:
+ "#pwm-cells":
+ const: 3
+ else:
+ properties:
+ "#pwm-cells":
+ const: 1
+ description: |
+ Used for specifying the period length in nanoseconds.
properties:
compatible:
- enum:
- - marvell,pxa250-pwm
- - marvell,pxa270-pwm
- - marvell,pxa168-pwm
- - marvell,pxa910-pwm
+ oneOf:
+ - enum:
+ - marvell,pxa250-pwm
+ - marvell,pxa270-pwm
+ - marvell,pxa168-pwm
+ - marvell,pxa910-pwm
+ - items:
+ - const: spacemit,k1-pwm
+ - const: marvell,pxa910-pwm
reg:
# Length should be 0x10
maxItems: 1
"#pwm-cells":
- # Used for specifying the period length in nanoseconds
- const: 1
+ description: Number of cells in a pwm specifier.
clocks:
maxItems: 1
+ resets:
+ maxItems: 1
+
required:
- compatible
- reg
- enum:
- mediatek,mt2712-pwm
- mediatek,mt6795-pwm
+ - mediatek,mt6991-pwm
- mediatek,mt7622-pwm
- mediatek,mt7623-pwm
- mediatek,mt7628-pwm
- enum:
- mediatek,mt8195-pwm
- const: mediatek,mt8183-pwm
+ - items:
+ - enum:
+ - mediatek,mt8196-pwm
+ - const: mediatek,mt6991-pwm
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nxp,lpc1850-sct-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx State Configurable Timer
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-sct-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pwm
+
+ '#pwm-cells':
+ const: 3
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#pwm-cells'
+
+allOf:
+ - $ref: pwm.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ pwm@40000000 {
+ compatible = "nxp,lpc1850-sct-pwm";
+ reg = <0x40000000 0x1000>;
+ clocks =<&ccu1 CLK_CPU_SCT>;
+ clock-names = "pwm";
+ #pwm-cells = <3>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nxp,lpc3220-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32XX PWM controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - nxp,lpc3220-pwm
+ - nxp,lpc3220-motor-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#pwm-cells':
+ const: 3
+
+required:
+ - compatible
+ - reg
+ - '#pwm-cells'
+
+allOf:
+ - $ref: pwm.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pwm@4005c000 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005c000 0x4>;
+ #pwm-cells = <3>;
+ };
+
properties:
compatible:
- const: sophgo,sg2042-pwm
+ enum:
+ - sophgo,sg2042-pwm
+ - sophgo,sg2044-pwm
reg:
maxItems: 1
title: Infineon Buck Regulators with PMBUS interfaces
maintainers:
- - Not Me.
+ - Guenter Roeck <linux@roeck-us.net>
allOf:
- $ref: regulator.yaml#
compatible:
enum:
- mediatek,mt6873-dvfsrc-regulator
+ - mediatek,mt6893-dvfsrc-regulator
- mediatek,mt8183-dvfsrc-regulator
- mediatek,mt8192-dvfsrc-regulator
- mediatek,mt8195-dvfsrc-regulator
+ - mediatek,mt8196-dvfsrc-regulator
dvfsrc-vcore:
description: DVFSRC-controlled SoC Vcore regulator
PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
dvs(dynamic voltage scaling) property.
+ regulator-allowed-modes:
+ description: |
+ Buck regulator operating modes allowed. Valid values below.
+ Users should use the macros from dt-bindings/regulator/nxp,pca9450-regulator.h
+ 0 (PCA9450_BUCK_MODE_AUTO): Auto PFM/PWM mode
+ 1 (PCA9450_BUCK_MODE_FORCE_PWM): Forced PWM mode
+ items:
+ enum: [ 0, 1 ]
+
unevaluatedProperties: false
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/nxp,pca9450-regulator.h>
i2c {
#address-cells = <1>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
+ regulator-initial-mode = <PCA9450_BUCK_MODE_FORCE_PWM>;
+ regulator-allowed-modes = <PCA9450_BUCK_MODE_FORCE_PWM>;
};
buck5: BUCK5 {
regulator-name = "BUCK5";
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
+ regulator-allowed-modes = <PCA9450_BUCK_MODE_AUTO
+ PCA9450_BUCK_MODE_FORCE_PWM>;
};
buck6: BUCK6 {
regulator-name = "BUCK6";
For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19
For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob
For PM7325, smps1 - smps8, ldo1 - ldo19
+ For PM7550, smps1 - smps6, ldo1 - ldo23, bob
For PM8005, smps1 - smps4
For PM8009, smps1 - smps2, ldo1 - ldo7
For PM8010, ldo1 - ldo7
For PMI8998, bob
For PMC8380, smps1 - smps8, ldo1 - lodo3
For PMR735A, smps1 - smps3, ldo1 - ldo7
+ For PMR735B, ldo1 - ldo12
For PMX55, smps1 - smps7, ldo1 - ldo16
For PMX65, smps1 - smps8, ldo1 - ldo21
For PMX75, smps1 - smps10, ldo1 - ldo21
- qcom,pm660-rpmh-regulators
- qcom,pm660l-rpmh-regulators
- qcom,pm7325-rpmh-regulators
+ - qcom,pm7550-rpmh-regulators
- qcom,pm8005-rpmh-regulators
- qcom,pm8009-rpmh-regulators
- qcom,pm8009-1-rpmh-regulators
- qcom,pmm8155au-rpmh-regulators
- qcom,pmm8654au-rpmh-regulators
- qcom,pmr735a-rpmh-regulators
+ - qcom,pmr735b-rpmh-regulators
- qcom,pmx55-rpmh-regulators
- qcom,pmx65-rpmh-regulators
- qcom,pmx75-rpmh-regulators
"^vdd-l[358]-supply$": true
"^vdd-s[1-8]-supply$": true
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,pm7550-rpmh-regulators
+ then:
+ properties:
+ vdd-bob-supply:
+ description: BOB regulator parent supply phandle.
+ vdd-l2-l3-supply: true
+ vdd-l4-l5-supply: true
+ vdd-l9-l10-supply: true
+ vdd-l12-l14-supply: true
+ vdd-l13-l16-supply: true
+ vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply: true
+ patternProperties:
+ "^vdd-l(1|[6-8]|11)-supply$": true
+ "^vdd-s[1-6]-supply$": true
+
- if:
properties:
compatible:
patternProperties:
"^vdd-s[1-3]-supply$": true
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,pmr735b-rpmh-regulators
+ then:
+ properties:
+ vdd-l1-l2-supply: true
+ vdd-l7-l8-supply: true
+ patternProperties:
+ "^vdd-l([3-6]|9|1[0-2])-supply$": true
+
- if:
properties:
compatible:
description: |
The RaspberryPi 7" display has an ATTINY88-based regulator/backlight
controller on the PCB, which is used to turn the display unit on/off
- and control the backlight.
+ and control the backlight. The V2 supports 5" and 7" panels and also
+ offers PWM backlight control.
allOf:
- $ref: regulator.yaml#
properties:
compatible:
- const: raspberrypi,7inch-touchscreen-panel-regulator
+ enum:
+ - raspberrypi,7inch-touchscreen-panel-regulator
+ - raspberrypi,touchscreen-panel-regulator-v2
reg:
maxItems: 1
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
properties:
compatible:
- enum:
- - qcom,sc8180x-adsp-pas
- - qcom,sc8180x-cdsp-pas
- - qcom,sc8180x-slpi-pas
- - qcom,sm8150-adsp-pas
- - qcom,sm8150-cdsp-pas
- - qcom,sm8150-mpss-pas
- - qcom,sm8150-slpi-pas
- - qcom,sm8250-adsp-pas
- - qcom,sm8250-cdsp-pas
- - qcom,sm8250-slpi-pas
+ oneOf:
+ - items:
+ - enum:
+ - qcom,qcs615-adsp-pas
+ - const: qcom,sm8150-adsp-pas
+ - items:
+ - enum:
+ - qcom,qcs615-cdsp-pas
+ - const: qcom,sm8150-cdsp-pas
+ - enum:
+ - qcom,sc8180x-adsp-pas
+ - qcom,sc8180x-cdsp-pas
+ - qcom,sc8180x-slpi-pas
+ - qcom,sm8150-adsp-pas
+ - qcom,sm8150-cdsp-pas
+ - qcom,sm8150-mpss-pas
+ - qcom,sm8150-slpi-pas
+ - qcom,sm8250-adsp-pas
+ - qcom,sm8250-cdsp-pas
+ - qcom,sm8250-slpi-pas
reg:
maxItems: 1
- if:
properties:
compatible:
- enum:
- - qcom,sc8180x-adsp-pas
- - qcom,sc8180x-cdsp-pas
- - qcom,sc8180x-slpi-pas
- - qcom,sm8150-adsp-pas
- - qcom,sm8150-cdsp-pas
- - qcom,sm8150-slpi-pas
- - qcom,sm8250-adsp-pas
- - qcom,sm8250-cdsp-pas
- - qcom,sm8250-slpi-pas
+ contains:
+ enum:
+ - qcom,sc8180x-adsp-pas
+ - qcom,sc8180x-cdsp-pas
+ - qcom,sc8180x-slpi-pas
+ - qcom,sm8150-adsp-pas
+ - qcom,sm8150-cdsp-pas
+ - qcom,sm8150-slpi-pas
+ - qcom,sm8250-adsp-pas
+ - qcom,sm8250-cdsp-pas
+ - qcom,sm8250-slpi-pas
then:
properties:
interrupts:
- if:
properties:
compatible:
- enum:
- - qcom,sc8180x-adsp-pas
- - qcom,sc8180x-cdsp-pas
- - qcom,sm8150-adsp-pas
- - qcom,sm8150-cdsp-pas
- - qcom,sm8250-cdsp-pas
+ contains:
+ enum:
+ - qcom,sc8180x-adsp-pas
+ - qcom,sc8180x-cdsp-pas
+ - qcom,sm8150-adsp-pas
+ - qcom,sm8150-cdsp-pas
+ - qcom,sm8250-cdsp-pas
then:
properties:
power-domains:
examples:
- |
reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- dram_cpu_bpmp_mail: shmem@f1be0000 {
- compatible = "nvidia,tegra264-bpmp-shmem";
- reg = <0x0 0xf1be0000 0x0 0x2000>;
- no-map;
- };
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ shmem@f1be0000 {
+ compatible = "nvidia,tegra264-bpmp-shmem";
+ reg = <0x0 0xf1be0000 0x0 0x2000>;
+ no-map;
+ };
};
...
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k230-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K230 Reset Controller
+
+maintainers:
+ - Junhui Liu <junhui.liu@pigmoral.tech>
+
+description:
+ The Canaan Kendryte K230 reset controller is part of the SoC's system
+ controller and controls the reset registers for CPUs and various peripherals.
+
+properties:
+ compatible:
+ const: canaan,k230-rst
+
+ reg:
+ maxItems: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ reset-controller@91101000 {
+ compatible = "canaan,k230-rst";
+ reg = <0x91101000 0x1000>;
+ #reset-cells = <1>;
+ };
+++ /dev/null
-NXP LPC1850 Reset Generation Unit (RGU)
-========================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "nxp,lpc1850-rgu"
-- reg: register base and length
-- clocks: phandle and clock specifier to RGU clocks
-- clock-names: should contain "delay" and "reg"
-- #reset-cells: should be 1
-
-See table below for valid peripheral reset numbers. Numbers not
-in the table below are either reserved or not applicable for
-normal operation.
-
-Reset Peripheral
- 9 System control unit (SCU)
- 12 ARM Cortex-M0 subsystem core (LPC43xx only)
- 13 CPU core
- 16 LCD controller
- 17 USB0
- 18 USB1
- 19 DMA
- 20 SDIO
- 21 External memory controller (EMC)
- 22 Ethernet
- 25 Flash bank A
- 27 EEPROM
- 28 GPIO
- 29 Flash bank B
- 32 Timer0
- 33 Timer1
- 34 Timer2
- 35 Timer3
- 36 Repetitive Interrupt timer (RIT)
- 37 State Configurable Timer (SCT)
- 38 Motor control PWM (MCPWM)
- 39 QEI
- 40 ADC0
- 41 ADC1
- 42 DAC
- 44 USART0
- 45 UART1
- 46 USART2
- 47 USART3
- 48 I2C0
- 49 I2C1
- 50 SSP0
- 51 SSP1
- 52 I2S0 and I2S1
- 53 Serial Flash Interface (SPIFI)
- 54 C_CAN1
- 55 C_CAN0
- 56 ARM Cortex-M0 application core (LPC4370 only)
- 57 SGPIO (LPC43xx only)
- 58 SPI (LPC43xx only)
- 60 ADCHS (12-bit ADC) (LPC4370 only)
-
-Refer to NXP LPC18xx or LPC43xx user manual for more details about
-the reset signals and the connected block/peripheral.
-
-Reset provider example:
-rgu: reset-controller@40053000 {
- compatible = "nxp,lpc1850-rgu";
- reg = <0x40053000 0x1000>;
- clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
- clock-names = "delay", "reg";
- #reset-cells = <1>;
-};
-
-Reset consumer example:
-mac: ethernet@40010000 {
- compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
- reg = <0x40010000 0x2000>;
- interrupts = <5>;
- interrupt-names = "macirq";
- clocks = <&ccu1 CLK_CPU_ETHERNET>;
- clock-names = "stmmaceth";
- resets = <&rgu 22>;
- reset-names = "stmmaceth";
-};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nxp,lpc1850-rgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 Reset Generation Unit (RGU)
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-rgu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: delay
+ - const: reg
+
+ '#reset-cells':
+ const: 1
+ description: |
+ See table below for valid peripheral reset numbers. Numbers not
+ in the table below are either reserved or not applicable for
+ normal operation.
+
+ Reset Peripheral
+ 9 System control unit (SCU)
+ 12 ARM Cortex-M0 subsystem core (LPC43xx only)
+ 13 CPU core
+ 16 LCD controller
+ 17 USB0
+ 18 USB1
+ 19 DMA
+ 20 SDIO
+ 21 External memory controller (EMC)
+ 22 Ethernet
+ 25 Flash bank A
+ 27 EEPROM
+ 28 GPIO
+ 29 Flash bank B
+ 32 Timer0
+ 33 Timer1
+ 34 Timer2
+ 35 Timer3
+ 36 Repetitive Interrupt timer (RIT)
+ 37 State Configurable Timer (SCT)
+ 38 Motor control PWM (MCPWM)
+ 39 QEI
+ 40 ADC0
+ 41 ADC1
+ 42 DAC
+ 44 USART0
+ 45 UART1
+ 46 USART2
+ 47 USART3
+ 48 I2C0
+ 49 I2C1
+ 50 SSP0
+ 51 SSP1
+ 52 I2S0 and I2S1
+ 53 Serial Flash Interface (SPIFI)
+ 54 C_CAN1
+ 55 C_CAN0
+ 56 ARM Cortex-M0 application core (LPC4370 only)
+ 57 SGPIO (LPC43xx only)
+ 58 SPI (LPC43xx only)
+ 60 ADCHS (12-bit ADC) (LPC4370 only)
+
+ Refer to NXP LPC18xx or LPC43xx user manual for more details about
+ the reset signals and the connected block/peripheral.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+ #include <dt-bindings/clock/lpc18xx-cgu.h>
+
+ reset-controller@40053000 {
+ compatible = "nxp,lpc1850-rgu";
+ reg = <0x40053000 0x1000>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "delay", "reg";
+ #reset-cells = <1>;
+ };
+
properties:
compatible:
- const: renesas,r9a09g057-usb2phy-reset # RZ/V2H(P)
+ oneOf:
+ - items:
+ - const: renesas,r9a09g056-usb2phy-reset # RZ/V2N
+ - const: renesas,r9a09g057-usb2phy-reset
+
+ - const: renesas,r9a09g057-usb2phy-reset # RZ/V2H(P)
reg:
maxItems: 1
+++ /dev/null
-Synopsys DesignWare Reset controller
-=======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-
-- compatible: should be one of the following.
- "snps,dw-high-reset" - for active high configuration
- "snps,dw-low-reset" - for active low configuration
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-- #reset-cells: must be 1.
-
-example:
-
- dw_rst_1: reset-controller@0000 {
- compatible = "snps,dw-high-reset";
- reg = <0x0000 0x4>;
- #reset-cells = <1>;
- };
-
- dw_rst_2: reset-controller@1000 {
- compatible = "snps,dw-low-reset";
- reg = <0x1000 0x8>;
- #reset-cells = <1>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/snps,dw-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Reset controller
+
+maintainers:
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+ compatible:
+ enum:
+ - snps,dw-high-reset
+ - snps,dw-low-reset
+
+ reg:
+ maxItems: 1
+
+ '#reset-cells':
+ const: 1
+
+ reset-controller: true
+
+required:
+ - compatible
+ - reg
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ reset-controller@0 {
+ compatible = "snps,dw-high-reset";
+ reg = <0x0000 0x4>;
+ #reset-cells = <1>;
+ };
- enum:
- sophgo,sg2044-reset
- const: sophgo,sg2042-reset
- - const: sophgo,sg2042-reset
+ - enum:
+ - sophgo,cv1800b-reset
+ - sophgo,sg2042-reset
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/andes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes SoC-based boards
+
+maintainers:
+ - Ben Zong-You Xie <ben717@andestech.com>
+
+description:
+ Andes SoC-based boards
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - andestech,voyager
+ - const: andestech,qilai
+
+additionalProperties: true
- items:
- enum:
- amd,mbv32
+ - amd,mbv64
- andestech,ax45mp
- canaan,k210
- sifive,bullet0
- items:
- enum:
- microchip,sam9x7-trng
+ - microchip,sama7d65-trng
- const: microchip,sam9x60-trng
clocks:
reg:
maxItems: 1
+ interrupts:
+ maxItems: 1
+
additionalProperties: false
examples:
- |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
rng@18032000 {
compatible = "brcm,iproc-rng200";
reg = <0x18032000 0x28>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
};
properties:
compatible:
- enum:
- - amlogic,a4-rtc
- - amlogic,a5-rtc
+ oneOf:
+ - enum:
+ - amlogic,a4-rtc
+ - amlogic,a5-rtc
+ - items:
+ - enum:
+ - amlogic,c3-rtc
+ - const: amlogic,a5-rtc
reg:
maxItems: 1
- nvidia,tegra186-rtc
- nvidia,tegra194-rtc
- nvidia,tegra234-rtc
+ - nvidia,tegra264-rtc
- const: nvidia,tegra20-rtc
reg:
properties:
compatible:
- const: nxp,lpc1788-rtc
+ oneOf:
+ - items:
+ - enum:
+ - nxp,lpc1850-rtc
+ - const: nxp,lpc1788-rtc
+ - const: nxp,lpc1788-rtc
reg:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,lpc3220-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx SoC Real-time Clock
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - nxp,lpc3220-rtc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ start-year: true
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: rtc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/lpc32xx-clock.h>
+
+ rtc@40024000 {
+ compatible = "nxp,lpc3220-rtc";
+ reg = <0x40024000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_RTC>;
+ };
+
properties:
compatible:
enum:
+ - microcrystal,rv8063
- microcrystal,rv8263
- nxp,pcf85063
- nxp,pcf85063a
wakeup-source: true
+ spi-cs-high: true
+
+ spi-3wire: true
+
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- $ref: rtc.yaml#
- if:
properties:
compatible:
contains:
enum:
+ - microcrystal,rv8063
- microcrystal,rv8263
then:
properties:
properties:
quartz-load-femtofarads:
const: 7000
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - microcrystal,rv8063
+ then:
+ properties:
+ spi-cs-high: false
+ spi-3wire: false
required:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
};
};
};
+
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@0 {
+ compatible = "microcrystal,rv8063";
+ reg = <0>;
+ spi-cs-high;
+ spi-3wire;
+ };
+ };
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r9a06g032-sysctrl.h>
rtc@40006000 {
- compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
- reg = <0x40006000 0x1000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "alarm", "timer", "pps";
- clocks = <&sysctrl R9A06G032_HCLK_RTC>;
- clock-names = "hclk";
- power-domains = <&sysctrl>;
- start-year = <2000>;
- };
+ compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
+ reg = <0x40006000 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "alarm", "timer", "pps";
+ clocks = <&sysctrl R9A06G032_HCLK_RTC>;
+ clock-names = "hclk";
+ power-domains = <&sysctrl>;
+ start-year = <2000>;
+ };
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/sophgo/sophgo,cv1800b-rtc.yaml#
+$id: http://devicetree.org/schemas/rtc/sophgo,cv1800b-rtc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Real Time Clock of the Sophgo CV1800 SoC
- microcrystal,rv3029
# Real Time Clock
- microcrystal,rv8523
- # NXP LPC32xx SoC Real-time Clock
- - nxp,lpc3220-rtc
# I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
- ricoh,r2025sd
# I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
oneOf:
- required: [ clock-frequency ]
- required: [ clocks ]
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nxp,lpc1850-uart
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: uartclk
+ - const: reg
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: spacemit,k1-uart
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: core
+ - const: bus
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - spacemit,k1-uart
+ - nxp,lpc1850-uart
+ then:
+ required:
+ - clocks
+ - clock-names
+ properties:
+ clocks:
+ minItems: 2
+ clock-names:
+ minItems: 2
+ else:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ maxItems: 1
properties:
compatible:
clock-names:
minItems: 1
- items:
- - const: core
- - const: bus
+ maxItems: 2
+ oneOf:
+ - enum:
+ - main
+ - uart
+ - items:
+ - const: core
+ - const: bus
+ - items:
+ - const: uartclk
+ - const: reg
+
+ dmas:
+ minItems: 1
+ maxItems: 4
+
+ dma-names:
+ minItems: 1
+ maxItems: 4
resets:
maxItems: 1
- reg
- interrupts
-if:
- properties:
- compatible:
- contains:
- const: spacemit,k1-uart
-then:
- required: [clock-names]
- properties:
- clocks:
- minItems: 2
- clock-names:
- minItems: 2
-else:
- properties:
- clocks:
- maxItems: 1
- clock-names:
- maxItems: 1
-
unevaluatedProperties: false
examples:
- const: dma_intr2
clocks:
- minItems: 1
+ maxItems: 1
clock-names:
const: sw_baud
items:
- const: xlnx,xuartps
- const: cdns,uart-r1p8
- - description: UART controller for Zynq Ultrascale+ MPSoC
- items:
- - const: xlnx,zynqmp-uart
+ - items:
+ - enum:
+ - axiado,ax3000-uart
+ - xlnx,zynqmp-uart
- const: cdns,uart-r1p12
reg:
- enum:
- mediatek,mt2701-uart
- mediatek,mt2712-uart
+ - mediatek,mt6572-uart
- mediatek,mt6580-uart
- mediatek,mt6582-uart
- mediatek,mt6589-uart
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,sa8255p-geni-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Geni based QUP UART interface
+
+maintainers:
+ - Praveen Talari <quic_ptalari@quicinc.com>
+
+allOf:
+ - $ref: /schemas/serial/serial.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,sa8255p-geni-uart
+ - qcom,sa8255p-geni-debug-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: UART core irq
+ - description: Wakeup irq (RX GPIO)
+
+ interrupt-names:
+ description:
+ The UART interrupt and optionally the RX in-band wakeup interrupt
+ as not all UART instances have a wakeup-capable interrupt routed
+ via the PDC.
+ minItems: 1
+ items:
+ - const: uart
+ - const: wakeup
+
+ power-domains:
+ minItems: 2
+ maxItems: 2
+
+ power-domain-names:
+ items:
+ - const: power
+ - const: perf
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - power-domain-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ serial@990000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ reg = <0x990000 0x4000>;
+ interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>;
+ power-domain-names = "power", "perf";
+ };
+...
- const: renesas,rcar-gen4-hscif # R-Car Gen4
- const: renesas,hscif # generic HSCIF compatible UART
+ - items:
+ - enum:
+ - renesas,hscif-r8a78000 # R-Car X5H
+ - const: renesas,rcar-gen5-hscif # R-Car Gen5
+ - const: renesas,hscif # generic HSCIF compatible UART
+
reg:
maxItems: 1
- renesas,rcar-gen2-hscif
- renesas,rcar-gen3-hscif
- renesas,rcar-gen4-hscif
+ - renesas,rcar-gen5-hscif
then:
required:
- resets
maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
- - Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
allOf:
- $ref: serial.yaml#
properties:
compatible:
- const: renesas,r9a09g077-rsci # RZ/T2H
+ oneOf:
+ - items:
+ - const: renesas,r9a09g087-rsci # RZ/N2H
+ - const: renesas,r9a09g077-rsci # RZ/T2H
+
+ - items:
+ - const: renesas,r9a09g077-rsci # RZ/T2H
reg:
maxItems: 1
- const: tei
clocks:
- maxItems: 1
+ minItems: 2
+ maxItems: 3
clock-names:
- const: fck # UART functional clock
+ minItems: 2
+ items:
+ - const: operation
+ - const: bus
+ - const: sck # optional external clock input
power-domains:
maxItems: 1
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/renesas-cpg-mssr.h>
- aliases {
- serial0 = &sci0;
- };
-
sci0: serial@80005000 {
compatible = "renesas,r9a09g077-rsci";
reg = <0x80005000 0x400>;
<GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "eri", "rxi", "txi", "tei";
- clocks = <&cpg CPG_MOD 108>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE 13>;
+ clock-names = "operation", "bus";
power-domains = <&cpg>;
};
- const: renesas,rcar-gen4-scif # R-Car Gen4
- const: renesas,scif # generic SCIF compatible UART
+ - items:
+ - enum:
+ - renesas,scif-r8a78000 # R-Car X5H
+ - const: renesas,rcar-gen5-scif # R-Car Gen5
+ - const: renesas,scif # generic SCIF compatible UART
+
- items:
- enum:
- renesas,scif-r9a07g044 # RZ/G2{L,LC}
- items:
- enum:
- renesas,scif-r9a09g047 # RZ/G3E
+ - renesas,scif-r9a09g056 # RZ/V2N
- const: renesas,scif-r9a09g057 # RZ/V2H fallback
reg:
- renesas,rcar-gen2-scif
- renesas,rcar-gen3-scif
- renesas,rcar-gen4-scif
+ - renesas,rcar-gen5-scif
- renesas,scif-r9a07g044
- renesas,scif-r9a09g057
then:
- samsung,exynos5433-uart
- samsung,exynos850-uart
- samsung,exynos8895-uart
+ - items:
+ - enum:
+ - samsung,exynos2200-uart
+ - const: google,gs101-uart
- items:
- enum:
- samsung,exynos7-uart
parameter. Define this if your UART does not implement the busy functionality.
type: boolean
+ power-domains:
+ maxItems: 1
+
resets:
minItems: 1
maxItems: 2
};
power-controller {
- compatible = "amlogic,meson-axg-pwrc";
- #power-domain-cells = <1>;
- amlogic,ao-sysctrl = <&sysctrl_AO>;
-
- resets = <&reset_viu>,
- <&reset_venc>,
- <&reset_vcbus>,
- <&reset_vencl>,
- <&reset_vid_lock>;
- reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
- clocks = <&clk_vpu>, <&clk_vapb>;
- clock-names = "vpu", "vapb";
+ compatible = "amlogic,meson-axg-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+ resets = <&reset_viu>,
+ <&reset_venc>,
+ <&reset_vcbus>,
+ <&reset_vencl>,
+ <&reset_vid_lock>;
+ reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
+ clocks = <&clk_vpu>, <&clk_vapb>;
+ clock-names = "vpu", "vapb";
};
phy {
- compatible = "amlogic,axg-mipi-pcie-analog-phy";
- #phy-cells = <0>;
+ compatible = "amlogic,axg-mipi-pcie-analog-phy";
+ #phy-cells = <0>;
};
};
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,imx23-digctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale mxs digctrl for i.MX23/i.MX28
+
+description: |
+ The digital control block provides overall control of various items within
+ the top digital block of the chip, including:
+ - Default first-level page table (DFLPT) controls
+ - HCLK performance counter
+ - Free-running microseconds counter
+ - Entropy control
+ - BIST controls for ARM Core and On-Chip RAM
+ - Chip Revision register
+ - USB loop back congtrol
+ - Other miscellaneous controls
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx28-digctl
+ - const: fsl,imx23-digctl
+ - const: fsl,imx23-digctl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ digctl@8001c000 {
+ compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+ reg = <0x8001c000 0x2000>;
+ interrupts = <89>;
+ };
+
compatible:
items:
- enum:
+ - qcom,milos-aoss-qmp
- qcom,qcs615-aoss-qmp
- qcom,qcs8300-aoss-qmp
- qcom,qdu1000-aoss-qmp
- qcom,sdx75-aoss-qmp
- qcom,sdm845-aoss-qmp
- qcom,sm6350-aoss-qmp
+ - qcom,sm7150-aoss-qmp
- qcom,sm8150-aoss-qmp
- qcom,sm8250-aoss-qmp
- qcom,sm8350-aoss-qmp
compatible:
items:
- enum:
+ - qcom,sm7150-dcc
- qcom,sm8150-dcc
- qcom,sc7280-dcc
- qcom,sc7180-dcc
examples:
- |
eud@88e0000 {
- compatible = "qcom,sc7280-eud", "qcom,eud";
- reg = <0x88e0000 0x2000>,
- <0x88e2000 0x1000>;
+ compatible = "qcom,sc7280-eud", "qcom,eud";
+ reg = <0x88e0000 0x2000>,
+ <0x88e2000 0x1000>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- eud_ep: endpoint {
- remote-endpoint = <&usb2_role_switch>;
- };
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ eud_ep: endpoint {
+ remote-endpoint = <&usb2_role_switch>;
+ };
+ };
- port@1 {
- reg = <1>;
- eud_con: endpoint {
- remote-endpoint = <&con_eud>;
- };
- };
- };
+ port@1 {
+ reg = <1>;
+ eud_con: endpoint {
+ remote-endpoint = <&con_eud>;
+ };
+ };
+ };
};
- const: qcom,pmic-glink
- items:
- enum:
+ - qcom,milos-pmic-glink
- qcom,sm8650-pmic-glink
- qcom,sm8750-pmic-glink
- qcom,x1e80100-pmic-glink
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,sa8255p-geni-se-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI Serial Engine QUP Wrapper Controller
+
+maintainers:
+ - Praveen Talari <quic_ptalari@quicinc.com>
+
+description:
+ Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+ is a programmable module for supporting a wide range of serial interfaces
+ like UART, SPI, I2C, I3C, etc. A single QUP module can provide up to 8 Serial
+ Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+ Wrapper controller is modeled as a node with zero or more child nodes each
+ representing a serial engine.
+
+properties:
+ compatible:
+ const: qcom,sa8255p-geni-se-qup
+
+ reg:
+ description: QUP wrapper common register address and length.
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
+ iommus:
+ maxItems: 1
+
+ dma-coherent: true
+
+patternProperties:
+ "spi@[0-9a-f]+$":
+ type: object
+ description: GENI serial engine based SPI controller. SPI in master mode
+ supports up to 50MHz, up to four chip selects, programmable
+ data path from 4 bits to 32 bits and numerous protocol
+ variants.
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sa8255p-geni-spi
+
+ "i2c@[0-9a-f]+$":
+ type: object
+ description: GENI serial engine based I2C controller.
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sa8255p-geni-i2c
+
+ "serial@[0-9a-f]+$":
+ type: object
+ description: GENI Serial Engine based UART Controller.
+ additionalProperties: true
+
+ properties:
+ compatible:
+ enum:
+ - qcom,sa8255p-geni-uart
+ - qcom,sa8255p-geni-debug-uart
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ geniqup@9c0000 {
+ compatible = "qcom,sa8255p-geni-se-qup";
+ reg = <0 0x9c0000 0 0x6000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ serial@990000 {
+ compatible = "qcom,sa8255p-geni-uart";
+ reg = <0 0x990000 0 0x4000>;
+ interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>;
+ power-domain-names = "power", "perf";
+ };
+ };
+ };
+...
- renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S)
- const: renesas,r8a779h0
+ - description: R-Car V4M-7 (R8A779H2)
+ items:
+ - enum:
+ - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H2ASKB0F10SA001)
+ - const: renesas,r8a779h2 # ES2.x
+ - const: renesas,r8a779h0
+
- description: R-Car H3e (R8A779M0)
items:
- enum:
- description: RZ/V2H(P) (R9A09G057)
items:
- enum:
- - renesas,rzv2h-evk # RZ/V2H EVK
+ - renesas,rzv2h-evk # RZ/V2H EVK (RTK0EF0168C06001BJ)
- enum:
- renesas,r9a09g057h41 # RZ/V2H
- renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support
- description: RZ/T2H (R9A09G077)
items:
- enum:
- - renesas,rzt2h-evk # RZ/T2H Evaluation Board
+ - renesas,rzt2h-evk # RZ/T2H Evaluation Board (RTK9RZT2H0S00000BJ)
- enum:
- renesas,r9a09g077m04 # RZ/T2H with Single Cortex-A55 + Dual Cortex-R52 - no security
- renesas,r9a09g077m24 # RZ/T2H with Dual Cortex-A55 + Dual Cortex-R52 - no security
- renesas,r9a09g077m44 # RZ/T2H with Quad Cortex-A55 + Dual Cortex-R52 - no security
- const: renesas,r9a09g077
+ - description: RZ/N2H (R9A09G087)
+ items:
+ - enum:
+ - renesas,rzn2h-evk # RZ/N2H Evaluation Board (RTK9RZN2H0S00000BJ)
+ - enum:
+ - renesas,r9a09g087m04 # RZ/N2H with Single Cortex-A55 + Dual Cortex-R52 - no security
+ - renesas,r9a09g087m24 # RZ/N2H with Dual Cortex-A55 + Dual Cortex-R52 - no security
+ - renesas,r9a09g087m44 # RZ/N2H with Quad Cortex-A55 + Dual Cortex-R52 - no security
+ - const: renesas,r9a09g087
+
additionalProperties: true
...
properties:
gpio:
type: object
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3328-grf-gpio
- $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
-
- unevaluatedProperties: false
+ additionalProperties: true
power-controller:
type: object
then:
required:
- google,pmu-intr-gen-syscon
+ else:
+ properties:
+ google,pmu-intr-gen-syscon: false
examples:
- |
- samsung,exynos8895-fsys1-sysreg
- samsung,exynos8895-peric0-sysreg
- samsung,exynos8895-peric1-sysreg
+ - samsung,exynosautov920-hsi2-sysreg
- samsung,exynosautov920-peric0-sysreg
- samsung,exynosautov920-peric1-sysreg
- tesla,fsd-cam-sysreg
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/riscv/sophgo.yaml#
+$id: http://devicetree.org/schemas/soc/sophgo/sophgo.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Sophgo SoC-based boards
- enum:
- sophgo,huashan-pi
- const: sophgo,cv1812h
+ - items:
+ - enum:
+ - milkv,duo-module-01-evb
+ - const: milkv,duo-module-01
+ - const: sophgo,sg2000
- items:
- enum:
- sipeed,licheerv-nano-b
- items:
- enum:
- milkv,pioneer
+ - sophgo,sg2042-evb-v1
+ - sophgo,sg2042-evb-v2
- const: sophgo,sg2042
- items:
- enum:
- spacemit,k1-syscon-apbc
- spacemit,k1-syscon-apmu
- spacemit,k1-syscon-mpmu
+ - spacemit,k1-syscon-rcpu
+ - spacemit,k1-syscon-rcpu2
+ - spacemit,k1-syscon-apbc2
reg:
maxItems: 1
required:
- compatible
- reg
- - clocks
- - clock-names
- - "#clock-cells"
- "#reset-cells"
allOf:
properties:
compatible:
contains:
- const: spacemit,k1-syscon-apbc
+ enum:
+ - spacemit,k1-syscon-apmu
+ - spacemit,k1-syscon-mpmu
then:
+ required:
+ - "#power-domain-cells"
+ else:
properties:
"#power-domain-cells": false
- else:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - spacemit,k1-syscon-apbc
+ - spacemit,k1-syscon-apmu
+ - spacemit,k1-syscon-mpmu
+ then:
required:
- - "#power-domain-cells"
+ - clocks
+ - clock-names
+ - "#clock-cells"
additionalProperties: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2025 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,j784s4-bist.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 BIST
+
+maintainers:
+ - Neha Malcom Francis <n-francis@ti.com>
+
+allOf:
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description:
+ The BIST (Built-In Self Test) module is an IP block present in K3 devices
+ that support triggering of BIST tests, both PBIST (Memory BIST) and LBIST
+ (Logic BIST) on a core. Both tests are destructive in nature. At boot, BIST
+ is executed by hardware for the MCU domain automatically as part of HW POST.
+
+properties:
+ compatible:
+ const: ti,j784s4-bist
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: ctrl_mmr
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,sci-dev-id
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ safety-selftest@33c0000 {
+ compatible = "ti,j784s4-bist";
+ reg = <0x00 0x033c0000 0x00 0x400>,
+ <0x00 0x0010c1a0 0x00 0x01c>;
+ reg-names = "cfg", "ctrl_mmr";
+ clocks = <&k3_clks 237 7>;
+ power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>;
+ ti,sci-dev-id = <234>;
+ };
+ };
};
wkup_m3_ipc@1324 {
- compatible = "ti,am3352-wkup-m3-ipc";
- reg = <0x1324 0x24>;
- interrupts = <78>;
- ti,rproc = <&wkup_m3>;
- mboxes = <&am335x_mailbox &mbox_wkupm3>;
- ti,vtt-gpio-pin = <7>;
- firmware-name = "am335x-evm-scale-data.bin";
+ compatible = "ti,am3352-wkup-m3-ipc";
+ reg = <0x1324 0x24>;
+ interrupts = <78>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&am335x_mailbox &mbox_wkupm3>;
+ ti,vtt-gpio-pin = <7>;
+ firmware-name = "am335x-evm-scale-data.bin";
};
};
pinctrl-0 = <&ddr3_vtt_toggle_default>;
ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
- pinctrl-single,pins = <
+ pinctrl-single,pins = <
0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7)
- >;
+ >;
};
};
wkup_m3_ipc@1324 {
- compatible = "ti,am4372-wkup-m3-ipc";
- reg = <0x1324 0x24>;
- interrupts = <78>;
- ti,rproc = <&wkup_m3>;
- mboxes = <&am437x_mailbox &mbox_wkupm3>;
- ti,set-io-isolation;
- firmware-name = "am43x-evm-scale-data.bin";
+ compatible = "ti,am4372-wkup-m3-ipc";
+ reg = <0x1324 0x24>;
+ interrupts = <78>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&am437x_mailbox &mbox_wkupm3>;
+ ti,set-io-isolation;
+ firmware-name = "am43x-evm-scale-data.bin";
};
};
properties:
compatible:
- enum:
- - atmel,at91rm9200-ssc
- - atmel,at91sam9g45-ssc
+ oneOf:
+ - enum:
+ - atmel,at91rm9200-ssc
+ - atmel,at91sam9g45-ssc
+ - items:
+ - enum:
+ - microchip,sam9x7-ssc
+ - const: atmel,at91sam9g45-ssc
reg:
maxItems: 1
description: This pin is connected to the chip's RESET pin.
maxItems: 1
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- reg
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,mxs-audio-sgtl5000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS audio complex with SGTL5000 codec
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - bluegiga,apx4devkit-sgtl5000
+ - denx,m28evk-sgtl5000
+ - fsl,imx28-evk-sgtl5000
+ - fsl,imx28-mbmx28lc-sgtl5000
+ - fsl,imx28-tx28-sgtl5000
+ - const: fsl,mxs-audio-sgtl5000
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The user-visible name of this sound complex
+
+ saif-controllers:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: The phandle list of the MXS SAIF controller
+
+ audio-codec:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of the SGTL5000 audio codec
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: |
+ A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's
+ source. Valid names could be power supplies, SGTL5000
+ pins, and the jacks on the board:
+
+ Power supplies:
+ * Mic Bias
+
+ SGTL5000 pins:
+ * MIC_IN
+ * LINE_IN
+ * HP_OUT
+ * LINE_OUT
+
+ Board connectors:
+ * Mic Jack
+ * Line In Jack
+ * Headphone Jack
+ * Line Out Jack
+ * Ext Spk
+
+required:
+ - compatible
+ - saif-controllers
+ - audio-codec
+
+allOf:
+ - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "fsl,imx28-evk-sgtl5000", "fsl,mxs-audio-sgtl5000";
+ model = "imx28-evk-sgtl5000";
+ saif-controllers = <&saif0 &saif1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt8173-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for MT8173
+
+maintainers:
+ - Trevor Wu <trevor.wu@mediatek.com>
+
+properties:
+ compatible:
+ const: mediatek,mt8173-afe-pcm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: audio infra sys clock
+ - description: audio top mux
+ - description: audio intbus mux
+ - description: apll1 clock
+ - description: apll2 clock
+ - description: i2s0 mclk mux
+ - description: i2s1 mclk mux
+ - description: i2s2 mclk mux
+ - description: i2s3 mclk mux
+ - description: i2s3 bclk mux
+
+ clock-names:
+ items:
+ - const: infra_sys_audio_clk
+ - const: top_pdn_audio
+ - const: top_pdn_aud_intbus
+ - const: bck0
+ - const: bck1
+ - const: i2s0_m
+ - const: i2s1_m
+ - const: i2s2_m
+ - const: i2s3_m
+ - const: i2s3_b
+
+ power-domains:
+ maxItems: 1
+
+ memory-region:
+ description: memory region for audio DMA buffers
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ mt8173-afe-pcm@11220000 {
+ compatible = "mediatek,mt8173-afe-pcm";
+ reg = <0x11220000 0x1000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_AUDIO>;
+ clocks = <&infracfg CLK_INFRA_AUDIO>,
+ <&topckgen CLK_TOP_AUDIO_SEL>,
+ <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+ <&topckgen CLK_TOP_APLL1_DIV0>,
+ <&topckgen CLK_TOP_APLL2_DIV0>,
+ <&topckgen CLK_TOP_I2S0_M_SEL>,
+ <&topckgen CLK_TOP_I2S1_M_SEL>,
+ <&topckgen CLK_TOP_I2S2_M_SEL>,
+ <&topckgen CLK_TOP_I2S3_M_SEL>,
+ <&topckgen CLK_TOP_I2S3_B_SEL>;
+ clock-names = "infra_sys_audio_clk",
+ "top_pdn_audio",
+ "top_pdn_aud_intbus",
+ "bck0",
+ "bck1",
+ "i2s0_m",
+ "i2s1_m",
+ "i2s2_m",
+ "i2s3_m",
+ "i2s3_b";
+ memory-region = <&afe_dma_mem>;
+ };
reset-names:
const: audiosys
+ memory-region:
+ description: memory region for audio DMA buffers
+ maxItems: 1
+
mediatek,apmixedsys:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of the mediatek apmixedsys controller
"top_apll12_div_tdm",
"top_mux_audio_h",
"top_clk26m_clk";
+ memory-region = <&afe_dma_mem>;
};
...
reset-names:
const: audiosys
+ memory-region:
+ description: memory region for audio DMA buffers
+ maxItems: 1
+
mediatek,apmixedsys:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of the mediatek apmixedsys controller
"aud_dac_predis_clk",
"aud_infra_clk",
"aud_infra_26m_clk";
+ memory-region = <&afe_dma_mem>;
};
...
+++ /dev/null
-Mediatek AFE PCM controller
-
-Required properties:
-- compatible = "mediatek,mt8173-afe-pcm";
-- reg: register location and size
-- interrupts: Should contain AFE interrupt
-- clock-names: should have these clock names:
- "infra_sys_audio_clk",
- "top_pdn_audio",
- "top_pdn_aud_intbus",
- "bck0",
- "bck1",
- "i2s0_m",
- "i2s1_m",
- "i2s2_m",
- "i2s3_m",
- "i2s3_b";
-
-Example:
-
- afe: mt8173-afe-pcm@11220000 {
- compatible = "mediatek,mt8173-afe-pcm";
- reg = <0 0x11220000 0 0x1000>;
- interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
- clocks = <&infracfg INFRA_AUDIO>,
- <&topckgen TOP_AUDIO_SEL>,
- <&topckgen TOP_AUD_INTBUS_SEL>,
- <&topckgen TOP_APLL1_DIV0>,
- <&topckgen TOP_APLL2_DIV0>,
- <&topckgen TOP_I2S0_M_CK_SEL>,
- <&topckgen TOP_I2S1_M_CK_SEL>,
- <&topckgen TOP_I2S2_M_CK_SEL>,
- <&topckgen TOP_I2S3_M_CK_SEL>,
- <&topckgen TOP_I2S3_B_CK_SEL>;
- clock-names = "infra_sys_audio_clk",
- "top_pdn_audio",
- "top_pdn_aud_intbus",
- "bck0",
- "bck1",
- "i2s0_m",
- "i2s1_m",
- "i2s2_m",
- "i2s3_m",
- "i2s3_b";
- };
+++ /dev/null
-* Freescale MXS audio complex with SGTL5000 codec
-
-Required properties:
-- compatible : "fsl,mxs-audio-sgtl5000"
-- model : The user-visible name of this sound complex
-- saif-controllers : The phandle list of the MXS SAIF controller
-- audio-codec : The phandle of the SGTL5000 audio codec
-- audio-routing : A list of the connections between audio components.
- Each entry is a pair of strings, the first being the
- connection's sink, the second being the connection's
- source. Valid names could be power supplies, SGTL5000
- pins, and the jacks on the board:
-
- Power supplies:
- * Mic Bias
-
- SGTL5000 pins:
- * MIC_IN
- * LINE_IN
- * HP_OUT
- * LINE_OUT
-
- Board connectors:
- * Mic Jack
- * Line In Jack
- * Headphone Jack
- * Line Out Jack
- * Ext Spk
-
-Example:
-
-sound {
- compatible = "fsl,imx28-evk-sgtl5000",
- "fsl,mxs-audio-sgtl5000";
- model = "imx28-evk-sgtl5000";
- saif-controllers = <&saif0 &saif1>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
-};
clock-names:
minItems: 1
- maxItems: 4
+ items:
+ - const: mclk
+ - const: macro
+ - const: dcodec
+ - const: npl
clock-output-names:
maxItems: 1
clocks:
maxItems: 1
clock-names:
- items:
- - const: mclk
+ maxItems: 1
- if:
properties:
minItems: 3
maxItems: 3
clock-names:
- items:
- - const: mclk
- - const: macro
- - const: dcodec
+ minItems: 3
+ maxItems: 3
- if:
properties:
minItems: 4
maxItems: 4
clock-names:
- items:
- - const: mclk
- - const: macro
- - const: dcodec
- - const: npl
+ minItems: 4
+ maxItems: 4
- if:
properties:
minItems: 3
maxItems: 3
clock-names:
- items:
- - const: mclk
- - const: macro
- - const: dcodec
+ minItems: 3
+ maxItems: 3
unevaluatedProperties: false
unevaluatedProperties: false
description: Qualcomm DSP audio ports
+ usbd:
+ type: object
+ $ref: /schemas/sound/qcom,q6usb.yaml#
+ unevaluatedProperties: false
+ description: Qualcomm DSP USB audio ports
+
required:
- compatible
- dais
qcom,sd-lines = <0 1 2 3>;
};
};
+
+ usbd {
+ compatible = "qcom,q6usb";
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x180f 0x0>;
+ qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+ };
};
};
- qcom,sm8750-sndcard
- const: qcom,sm8450-sndcard
- enum:
+ - fairphone,fp4-sndcard
- fairphone,fp5-sndcard
- qcom,apq8096-sndcard
- qcom,qcm6490-idp-sndcard
- qcom,qcs6490-rb3gen2-sndcard
+ - qcom,qcs8275-sndcard
- qcom,qcs9075-sndcard
- qcom,qcs9100-sndcard
- qcom,qrb4210-rb2-sndcard
purpose of handling altmode muxing and orientation switching to detect and
enable Audio Accessory Mode.
+ vdd-px-supply:
+ description: A reference to the 1.2V PX supply
+
required:
- compatible
$id: http://devicetree.org/schemas/sound/richtek,rt9123.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Richtek RT9123 Audio Amplifier
+title: Richtek RT9123/RTQ9124 Audio Amplifier
maintainers:
- ChiYuan Huang <cy_huang@richtek.com>
support various formats, including I2S, left-justified, right-justified, and
TDM formats.
+ RTQ9124 is an ultra-low output noise, digital input, mono-channel Class-D
+ power amplifier that supports a 2.1MHz switching frequency. It integrates
+ both DC and AC load diagnostics, as well as real-time load monitoring to
+ assess speaker condition. The device operates from 4.5V to 18V and delivers
+ up to 30W output power.
+
allOf:
- $ref: dai-common.yaml#
compatible:
enum:
- richtek,rt9123
+ - richtek,rtq9124
reg:
maxItems: 1
- ti,tas5719
- ti,tas5721
- ti,tas5733
+ - ti,tas5753
reg:
maxItems: 1
contains:
enum:
- ti,tas5721
+ - ti,tas5753
then:
properties:
HPVDD-supply: false
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2025 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/amlogic,a4-spisg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic SPI Scatter-Gather Controller
+
+maintainers:
+ - Xianwei Zhao <xianwei.zhao@amlogic.com>
+ - Sunny Luo <sunny.luo@amlogic.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: amlogic,a4-spisg
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ spi@50000 {
+ compatible = "amlogic,a4-spisg";
+ reg = <0x50000 0x38>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc 37>,
+ <&clkc 93>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- fsl,ls2080a-dspi
- fsl,ls2085a-dspi
- fsl,lx2160a-dspi
+ - nxp,s32g2-dspi
- items:
- enum:
- fsl,ls1012a-dspi
- items:
- const: fsl,lx2160a-dspi
- const: fsl,ls2085a-dspi
+ - items:
+ - const: nxp,s32g3-dspi
+ - const: nxp,s32g2-dspi
reg:
maxItems: 1
spi-cs-hold-delay-ns = <50>;
};
};
+ # S32G3 in target mode
+ - |
+ spi@401d4000 {
+ compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+ reg = <0x401d4000 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <8>;
+ bus-num = <0>;
+ dmas = <&edma0 0 7>, <&edma0 0 8>;
+ dma-names = "tx", "rx";
+ spi-slave;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,orion-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion SPI controller
+
+maintainers:
+ - Andrew Lunn <andrew@lunn.ch>
+ - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - marvell,orion-spi
+ - marvell,armada-380-spi # For ap80x and cp11x
+ - items:
+ - enum:
+ - marvell,armada-370-spi
+ - marvell,armada-375-spi
+ - marvell,armada-380-spi
+ - marvell,armada-390-spi
+ - marvell,armada-xp-spi
+ - const: marvell,orion-spi
+
+ cell-index:
+ description: Instance id for the SPI controller
+ deprecated: true
+
+ reg:
+ minItems: 1
+ items:
+ - description: control registers
+ - description: CS0 MBUS target/attribute registers for direct mode
+ - description: CS1 MBUS target/attribute registers for direct mode
+ - description: CS2 MBUS target/attribute registers for direct mode
+ - description: CS3 MBUS target/attribute registers for direct mode
+ - description: CS4 MBUS target/attribute registers for direct mode
+ - description: CS5 MBUS target/attribute registers for direct mode
+ - description: CS6 MBUS target/attribute registers for direct mode
+ - description: CS7 MBUS target/attribute registers for direct mode
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: axi
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <0x10600 0x28>;
+ clocks = <&coreclk 0>;
+ interrupts = <23>;
+ };
+ - |
+ #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+ <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+ <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+ <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+ <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+ <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+ <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+ <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+ <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+ clocks = <&coreclk 0>;
+ interrupts = <23>;
+ };
+ };
- mediatek,mt7988-spi-single
- mediatek,mt8188-spi-ipm
- const: mediatek,spi-ipm
+ - items:
+ - enum:
+ - mediatek,mt8196-spi
+ - const: mediatek,mt6991-spi
- items:
- enum:
- mediatek,mt2701-spi
- mediatek,mt6589-spi
- mediatek,mt6765-spi
- mediatek,mt6893-spi
+ - mediatek,mt6991-spi
- mediatek,mt7622-spi
- mediatek,mt8135-spi
- mediatek,mt8173-spi
interrupts:
maxItems: 1
+ clocks:
+ maxItems: 1
+
dmas:
maxItems: 1
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nxp,lpc3220-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 SPI controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - nxp,lpc3220-spi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc32xx-clock.h>
+
+ spi@20088000 {
+ compatible = "nxp,lpc3220-spi";
+ reg = <0x20088000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SPI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rzv2h-rspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) Renesas Serial Peripheral Interface (RSPI)
+
+maintainers:
+ - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: renesas,r9a09g057-rspi # RZ/V2H(P)
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Idle Interrupt
+ - description: Error Interrupt
+ - description: Communication End Interrupt
+ - description: Receive Buffer Full Interrupt
+ - description: Transmit Buffer Empty Interrupt
+
+ interrupt-names:
+ items:
+ - const: idle
+ - const: error
+ - const: end
+ - const: rx
+ - const: tx
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: pclk_sfr
+ - const: tclk
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: presetn
+ - const: tresetn
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - '#address-cells'
+ - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/renesas-cpg-mssr.h>
+ spi@12800800 {
+ compatible = "renesas,r9a09g057-rspi";
+
+ reg = <0x12800800 0x400>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 504 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 505 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "idle", "error", "end", "rx", "tx";
+ clocks = <&cpg CPG_MOD 0x5a>,
+ <&cpg CPG_MOD 0x5b>,
+ <&cpg CPG_MOD 0x5c>;
+ clock-names = "pclk", "pclk_sfr", "tclk";
+ resets = <&cpg 0x7f>, <&cpg 0x80>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- enum:
- fsl,imx7ulp-spi
- fsl,imx8qxp-spi
+ - nxp,s32g2-lpspi
- items:
- enum:
- fsl,imx8ulp-spi
- fsl,imx94-spi
- fsl,imx95-spi
- const: fsl,imx7ulp-spi
+ - items:
+ - const: nxp,s32g3-lpspi
+ - const: nxp,s32g2-lpspi
+
reg:
maxItems: 1
required:
- compatible
- reg
- - spi-max-frequency
- mux-controls
unevaluatedProperties: false
+++ /dev/null
-Marvell Orion SPI device
-
-Required properties:
-- compatible : should be on of the following:
- - "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs
- - "marvell,armada-370-spi", for the Armada 370 SoCs
- - "marvell,armada-375-spi", for the Armada 375 SoCs
- - "marvell,armada-380-spi", for the Armada 38x SoCs
- - "marvell,armada-390-spi", for the Armada 39x SoCs
- - "marvell,armada-xp-spi", for the Armada XP SoCs
-- reg : offset and length of the register set for the device.
- This property can optionally have additional entries to configure
- the SPI direct access mode that some of the Marvell SoCs support
- additionally to the normal indirect access (PIO) mode. The values
- for the MBus "target" and "attribute" are defined in the Marvell
- SoC "Functional Specifications" Manual in the chapter "Marvell
- Core Processor Address Decoding".
- The eight register sets following the control registers refer to
- chip-select lines 0 through 7 respectively.
-- cell-index : Which of multiple SPI controllers is this.
-- clocks : pointers to the reference clocks for this device, the first
- one is the one used for the clock on the spi bus, the
- second one is optional and is the clock used for the
- functional part of the controller
-
-Optional properties:
-- interrupts : Is currently not used.
-- clock-names : names of used clocks, mandatory if the second clock is
- used, the name must be "core", and "axi" (the latter
- is only for Armada 7K/8K).
-
-
-Example:
- spi@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- reg = <0x10600 0x28>;
- interrupts = <23>;
- };
-
-Example with SPI direct mode support (optionally):
- spi0: spi@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
- <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
- <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
- <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
- <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
- <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
- <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
- <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
- <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
- interrupts = <23>;
- };
-
-To enable the direct mode, the board specific 'ranges' property in the
-'soc' node needs to add the entries for the desired SPI controllers
-and its chip-selects that are used in the direct mode instead of PIO
-mode. Here an example for this (SPI controller 0, device 1 and SPI
-controller 1, device 2 are used in direct mode. All other SPI device
-are used in the default indirect (PIO) mode):
- soc {
- /*
- * Enable the SPI direct access by configuring an entry
- * here in the board-specific ranges property
- */
- ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000>, /* internal regs */
- <MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>, /* BootROM */
- <MBUS_ID(0x01, 0x5e) 0 0 0xf1100000 0x10000>, /* SPI0-DEV1 */
- <MBUS_ID(0x01, 0x9a) 0 0 0xf1110000 0x10000>; /* SPI1-DEV2 */
-
-For further information on the MBus bindings, please see the MBus
-DT documentation:
-Documentation/devicetree/bindings/bus/mvebu-mbus.txt
maxItems: 4
st,spi-midi-ns:
+ deprecated: true
description: |
Only for STM32H7, (Master Inter-Data Idleness) minimum time
delay in nanoseconds inserted between two consecutive data frames.
properties:
compatible:
- oneOf:
- - const: sophgo,sg2044-spifmc-nor
- - items:
- - enum:
- - sophgo,sg2042-spifmc-nor
- - const: sophgo,sg2044-spifmc-nor
+ enum:
+ - sophgo,sg2042-spifmc-nor
+ - sophgo,sg2044-spifmc-nor
reg:
maxItems: 1
allOf:
- $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32f4-spi
+
+ then:
+ properties:
+ st,spi-midi-ns: false
+ sram: false
+ dmas:
+ maxItems: 2
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp25-spi
+
+ then:
+ properties:
+ sram: false
+ dmas:
+ maxItems: 2
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
properties:
compatible:
dmas:
description: |
- DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
- the STM32 DMA controllers bindings Documentation/devicetree/bindings/dma/stm32/*.yaml.
+ DMA specifiers for tx and rx channels. DMA fifo mode must be used. See
+ the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32/st,*dma.yaml
+ minItems: 2
items:
- description: rx DMA channel
- description: tx DMA channel
+ - description: rxm2m MDMA channel
dma-names:
+ minItems: 2
items:
- const: rx
- const: tx
+ - const: rxm2m
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ Phandles to a reserved SRAM region which is used as temporary
+ storage memory between DMA and MDMA engines.
+ The region should be defined as child node of the AHB SRAM node
+ as per the generic bindings in Documentation/devicetree/bindings/sram/sram.yaml
access-controllers:
minItems: 1
- qcom,msm8974-imem
- qcom,msm8976-imem
- qcom,qcs404-imem
+ - qcom,qcs615-imem
- qcom,qcs8300-imem
- qcom,qdu1000-imem
- qcom,sa8775p-imem
+ - qcom,sar2130p-imem
- qcom,sc7180-imem
- qcom,sc7280-imem
+ - qcom,sc8280xp-imem
- qcom,sdm630-imem
- qcom,sdm845-imem
- qcom,sdx55-imem
- qcom,sdx65-imem
+ - qcom,sdx75-imem
+ - qcom,sm6115-imem
+ - qcom,sm6125-imem
+ - qcom,sm6350-imem
- qcom,sm6375-imem
+ - qcom,sm7150-imem
+ - qcom,sm8150-imem
+ - qcom,sm8250-imem
+ - qcom,sm8350-imem
- qcom,sm8450-imem
+ - qcom,sm8550-imem
+ - qcom,sm8650-imem
+ - qcom,sm8750-imem
+ - qcom,x1e80100-imem
- const: syscon
- const: simple-mfd
+++ /dev/null
-* ST SPEAr ADC device driver
-
-Required properties:
-- compatible: Should be "st,spear600-adc"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the ADC interrupt
-- sampling-frequency: Default sampling frequency
-
-Optional properties:
-- vref-external: External voltage reference in milli-volts. If omitted
- the internal voltage reference will be used.
-- average-samples: Number of samples to generate an average value. If
- omitted, single data conversion will be used.
-
-Examples:
-
- adc: adc@d8200000 {
- compatible = "st,spear600-adc";
- reg = <0xd8200000 0x1000>;
- interrupt-parent = <&vic1>;
- interrupts = <6>;
- sampling-frequency = <5000000>;
- vref-external = <2500>; /* 2.5V VRef */
- };
"<binding dir>: dt-bindings: ..."
The 80 characters of the subject are precious. It is recommended to not
- use "Documentation" or "doc" because that is implied. All bindings are
- docs. Repeating "binding" again should also be avoided.
+ use "Documentation", "doc" or "YAML" because that is implied. All
+ bindings are docs and all new bindings are supposed to be in Devicetree
+ schema format. Repeating "binding" again should also be avoided, so for
+ a new device it is often enough for example::
+
+ "dt-bindings: iio: adc: Add ROHM BD79100G"
+
+ Conversion of other formats to DT schema::
+
+ "dt-bindings: iio: adc: adi,ad7476: Convert to DT schema"
2) DT binding files are written in DT schema format using json-schema
vocabulary and YAML file format. The DT binding files must pass validation
properties:
compatible:
- enum:
- - mediatek,mt2701-thermal
- - mediatek,mt2712-thermal
- - mediatek,mt7622-thermal
- - mediatek,mt7981-thermal
- - mediatek,mt7986-thermal
- - mediatek,mt8173-thermal
- - mediatek,mt8183-thermal
- - mediatek,mt8365-thermal
- - mediatek,mt8516-thermal
+ oneOf:
+ - enum:
+ - mediatek,mt2701-thermal
+ - mediatek,mt2712-thermal
+ - mediatek,mt7622-thermal
+ - mediatek,mt7986-thermal
+ - mediatek,mt8173-thermal
+ - mediatek,mt8183-thermal
+ - mediatek,mt8365-thermal
+ - items:
+ - enum:
+ - mediatek,mt8516-thermal
+ - const: mediatek,mt2701-thermal
+ - items:
+ - enum:
+ - mediatek,mt7981-thermal
+ - const: mediatek,mt7986-thermal
reg:
maxItems: 1
- nvidia,tegra124-soctherm
- nvidia,tegra132-soctherm
- nvidia,tegra210-soctherm
+ - nvidia,tegra210b01-soctherm
reg:
maxItems: 2
enum:
- nvidia,tegra124-soctherm
- nvidia,tegra210-soctherm
+ - nvidia,tegra210b01-soctherm
then:
properties:
reg:
- description: v2 of TSENS
items:
- enum:
+ - qcom,milos-tsens
- qcom,msm8953-tsens
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- rockchip,rk3368-tsadc
- rockchip,rk3399-tsadc
- rockchip,rk3568-tsadc
+ - rockchip,rk3576-tsadc
- rockchip,rk3588-tsadc
- rockchip,rv1108-tsadc
- const: tsadc
- const: apb_pclk
+ nvmem-cells:
+ items:
+ - description: cell handle to where the trim's base temperature is stored
+ - description:
+ cell handle to where the trim's tenths of Celsius base value is stored
+
+ nvmem-cell-names:
+ items:
+ - const: trim_base
+ - const: trim_base_frac
+
resets:
minItems: 1
maxItems: 3
- const: tsadc
- const: tsadc-phy
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
"#thermal-sensor-cells":
const: 1
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
+patternProperties:
+ "@[0-9a-f]+$":
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+ description: sensor ID, a.k.a. channel number
+
+ nvmem-cells:
+ items:
+ - description: handle of cell containing calibration data
+
+ nvmem-cell-names:
+ items:
+ - const: trim
+
+ required:
+ - reg
+
+ unevaluatedProperties: false
+
required:
- compatible
- reg
- clock-names
- resets
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3568-tsadc
+ then:
+ properties:
+ nvmem-cells: false
+ nvmem-cell-names: false
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3568-tsadc
+ - rockchip,rk3576-tsadc
+ then:
+ patternProperties:
+ "@[0-9a-f]+$": false
+
unevaluatedProperties: false
examples:
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/andestech,plmt0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes machine-level timer
+
+description:
+ The Andes machine-level timer device (PLMT0) provides machine-level timer
+ functionality for a set of HARTs on a RISC-V platform. It has a single
+ fixed-frequency monotonic time counter (MTIME) register and a time compare
+ register (MTIMECMP) for each HART connected to the PLMT0. A timer interrupt is
+ generated if MTIME >= MTIMECMP.
+
+maintainers:
+ - Ben Zong-You Xie <ben717@andestech.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - andestech,qilai-plmt
+ - const: andestech,plmt0
+
+ reg:
+ maxItems: 1
+
+ interrupts-extended:
+ minItems: 1
+ maxItems: 32
+ description:
+ Specifies which harts are connected to the PLMT0. Each item must points
+ to a riscv,cpu-intc node, which has a riscv cpu node as parent. The
+ PLMT0 supports 1 hart up to 32 harts.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts-extended
+
+examples:
+ - |
+ interrupt-controller@100000 {
+ compatible = "andestech,qilai-plmt", "andestech,plmt0";
+ reg = <0x100000 0x100000>;
+ interrupts-extended = <&cpu0intc 7>,
+ <&cpu1intc 7>,
+ <&cpu2intc 7>,
+ <&cpu3intc 7>;
+ };
+++ /dev/null
-VIA/Wondermedia VT8500 Timer
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-timer"
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : interrupt for the timer
-
-Example:
-
- timer@d8130100 {
- compatible = "via,vt8500-timer";
- reg = <0xd8130100 0x28>;
- interrupts = <36>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/via,vt8500-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA/Wondermedia VT8500 Timer
+
+description:
+ This is the timer block that is a standalone part of the system power
+ management controller on VIA/WonderMedia SoCs (VIA VT8500 and alike).
+ The hardware has a single 32-bit counter running at 3 MHz and four match
+ registers, each of which is associated with a dedicated match interrupt,
+ and the first of which can also serve as the system watchdog (if the
+ watchdog function is enabled, it will reset the system upon match instead
+ of triggering its respective interrupt)
+
+maintainers:
+ - Alexey Charkov <alchark@gmail.com>
+
+properties:
+ compatible:
+ const: via,vt8500-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: Channel 0 match. Note that if the watchdog function
+ is enabled, this interrupt will not fire and the system will
+ reboot instead once the counter reaches match register 0 value
+ - description: Channel 1 match
+ - description: Channel 2 match
+ - description: Channel 3 match
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ timer@d8130100 {
+ compatible = "via,vt8500-timer";
+ reg = <0xd8130100 0x28>;
+ interrupts = <36>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2025 Analog Devices, Inc.
+# Copyright (c) 2025 BayLibre, SAS
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/trigger-source/adi,util-sigma-delta-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Util Sigma-Delta SPI IP Core
+
+maintainers:
+ - David Lechner <dlechner@baylibre.com>
+
+description:
+ The Util Sigma-Delta SPI is an FPGA IP core from Analog Devices that provides
+ a SPI offload trigger from the RDY signal of the combined DOUT/RDY pin of
+ the sigma-delta family of ADCs.
+ https://analogdevicesinc.github.io/hdl/library/util_sigma_delta_spi/index.html
+
+properties:
+ compatible:
+ const: adi,util-sigma-delta-spi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#trigger-source-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#trigger-source-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ trigger@40000 {
+ reg = <0x40000 0x1000>;
+ compatible = "adi,util-sigma-delta-spi";
+ clocks = <&clk 0>;
+ #trigger-source-cells = <0>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/trigger-source/gpio-trigger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic trigger source using GPIO
+
+description: A GPIO used as a trigger source.
+
+maintainers:
+ - Jonathan Santos <Jonathan.Santos@analog.com>
+
+properties:
+ compatible:
+ const: gpio-trigger
+
+ '#trigger-source-cells':
+ const: 0
+
+ gpios:
+ maxItems: 1
+ description: GPIO to be used as a trigger source.
+
+required:
+ - compatible
+ - '#trigger-source-cells'
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ trigger {
+ compatible = "gpio-trigger";
+ #trigger-source-cells = <0>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
items:
# Entries are sorted alphanumerically by the compatible
- enum:
+ # ABB register based spi sensors
+ - abb,spi-sensor
# Acbel fsg032 power supply
- acbel,fsg032
# SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
- ad,adm9240
# AD5110 - Nonvolatile Digital Potentiometer
- adi,ad5110
- # Analog Devices ADP5589 Keypad Decoder and I/O Expansion
- - adi,adp5589
+ # Temperature sensor with integrated fan control
+ - adi,adm1027
+ # Analog Devices ADT7411 Temperature Sensor and 8-channel ADC
+ - adi,adt7411
+ # Temperature sensor with integrated fan control
+ - adi,adt7463
+ # Temperature sensor with integrated fan control
+ - adi,adt7468
# Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher
- adi,lt7182s
# AMS iAQ-Core VOC Sensor
- mps,mp2891
# Monolithic Power Systems Inc. multi-phase controller mp2993
- mps,mp2993
+ # Monolithic Power Systems Inc. hot-swap protection device
+ - mps,mp5023
# Monolithic Power Systems Inc. multi-phase hot-swap controller mp5920
- mps,mp5920
# Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
- mps,mp9941
# Temperature sensor with integrated fan control
- national,lm63
+ # Temperature sensor with integrated fan control
+ - national,lm64
+ # Temperature sensor
+ - national,lm95235
+ # Temperature sensor
+ - national,lm95245
+ # Temperature sensor with integrated fan control
+ - national,lm96163
# Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
- national,lm80
# Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
- national,lm81
# Temperature sensor with integrated fan control
- national,lm85
+ # Temperature sensor with integrated fan control
+ - national,lm85b
+ # Temperature sensor with integrated fan control
+ - national,lm85c
# I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
- national,lm92
# Nuvoton Temperature Sensor
- nuvoton,w83773g
+ # NXP ISP1301 USB transceiver
+ - nxp,isp1301
# OKI ML86V7667 video decoder
- oki,ml86v7667
# ON Semiconductor ADT7462 Temperature, Voltage Monitor and Fan Controller
- silabs,si7020
# Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
- skyworks,sky81452
+ # Temperature sensor with integrated fan control
+ - smsc,emc6d100
+ # Temperature sensor with integrated fan control
+ - smsc,emc6d101
+ # Temperature sensor with integrated fan control
+ - smsc,emc6d102
+ # Temperature sensor with integrated fan control
+ - smsc,emc6d103
+ # Temperature sensor with integrated fan control
+ - smsc,emc6d103s
# SparkFun Qwiic Joystick (COM-15168) with i2c interface
- sparkfun,qwiic-joystick
# Sierra Wireless mangOH Green SPI IoT interface
- swir,mangoh-iotport-spi
# Ambient Light Sensor with SMBUS/Two Wire Serial Interface
- taos,tsl2550
+ # Digital PWM System Controller PMBus
+ - ti,cd9200
+ # Digital PWM System Controller PMBus
+ - ti,cd9220
+ # Digital PWM System Controller PMBus
+ - ti,cd9222
+ # Digital PWM System Controller PMBus
+ - ti,cd9224
+ # Digital PWM System Controller PMBus
+ - ti,cd9240
+ # Digital PWM System Controller PMBus
+ - ti,cd9244
+ # Digital PWM System Controller PMBus
+ - ti,cd9246
+ # Digital PWM System Controller PMBus
+ - ti,cd9248
# Temperature and humidity sensor with i2c interface
- ti,hdc1000
# Temperature and humidity sensor with i2c interface
- ti,tmp125
# TI DC-DC converter on PMBus
- ti,tps40400
+ # TI DCAP+ multiphase controller
+ - ti,tps53647
+ # TI DCAP+ multiphase controller
+ - ti,tps53667
# TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus
- ti,tps53676
# TI Dual channel DCAP+ multiphase controller TPS53679
- ti,tps53679
# TI Dual channel DCAP+ multiphase controller TPS53681
- ti,tps53681
+ # TI Dual channel DCAP+ multiphase controller TPS53685 with AMD-SVI3
+ - ti,tps53685
# TI Dual channel DCAP+ multiphase controller TPS53688
- ti,tps53688
# TI DC-DC converters on PMBus
maintainers:
- Stanley Chu <stanley.chu@mediatek.com>
-allOf:
- - $ref: ufs-common.yaml
-
properties:
compatible:
enum:
- mediatek,mt8183-ufshci
- mediatek,mt8192-ufshci
+ - mediatek,mt8195-ufshci
clocks:
- maxItems: 1
+ minItems: 1
+ maxItems: 8
clock-names:
- items:
- - const: ufs
+ minItems: 1
+ maxItems: 8
phys:
maxItems: 1
vcc-supply: true
+ mediatek,ufs-disable-mcq:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: The mask to disable MCQ (Multi-Circular Queue) for UFS host.
+
required:
- compatible
- clocks
unevaluatedProperties: false
+allOf:
+ - $ref: ufs-common.yaml
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt8195-ufshci
+ then:
+ properties:
+ clocks:
+ minItems: 8
+ clock-names:
+ items:
+ - const: ufs
+ - const: ufs_aes
+ - const: ufs_tick
+ - const: unipro_sysclk
+ - const: unipro_tick
+ - const: unipro_mp_bclk
+ - const: ufs_tx_symbol
+ - const: ufs_mem_sub
+ else:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ items:
+ - const: ufs
+
examples:
- |
#include <dt-bindings/clock/mt8183-clk.h>
- nvidia,tegra30-udc
- nvidia,tegra114-udc
- nvidia,tegra124-udc
+ - nxp,s32g2-usb
- qcom,ci-hdrc
- items:
- enum:
- enum:
- nuvoton,npcm845-udc
- const: nuvoton,npcm750-udc
+ - items:
+ - enum:
+ - nxp,s32g3-usb
+ - const: nxp,s32g2-usb
clocks:
minItems: 1
- const: amcc,dwc-otg
- const: apm,apm82181-dwc-otg
- const: snps,dwc2
- - const: sophgo,cv1800-usb
+ - const: sophgo,cv1800b-usb
- const: st,stm32f4x9-fsotg
- const: st,stm32f4x9-hsotg
- const: st,stm32f7-hsotg
- fsl,imx53-usbmisc
- fsl,imx6q-usbmisc
- fsl,vf610-usbmisc
+ - nxp,s32g2-usbmisc
+ - nxp,s32g3-usbmisc
- items:
- enum:
- fsl,imx6ul-usbmisc
description:
The regulator that provides 3.3V or 5.0V core power to the hub.
- peer-hub:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
- For onboard hub controllers that support USB 3.x and USB 2.0 hubs
- with shared resets and power supplies, this property is used to identify
- the hubs with which these are shared.
+ peer-hub: true
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ patternProperties:
+ '^port@':
+ $ref: /schemas/graph.yaml#/properties/port
+
+ properties:
+ reg:
+ minimum: 1
+ maximum: 4
required:
- compatible
- reg
allOf:
- - $ref: usb-device.yaml#
+ - $ref: usb-hub.yaml#
- if:
properties:
compatible:
peer-hub: true
vdd-supply: true
-patternProperties:
- "^.*@[0-9a-f]{1,2}$":
- description: The hard wired USB devices
- type: object
- $ref: /schemas/usb/usb-device.yaml
- additionalProperties: true
-
unevaluatedProperties: false
examples:
+++ /dev/null
-* NXP ISP1301 USB transceiver
-
-Required properties:
-- compatible: must be "nxp,isp1301"
-- reg: I2C address of the ISP1301 device
-
-Optional properties of devices using ISP1301:
-- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the
- ISP1301 instance associated with the respective USB driver
-
-Example:
-
- isp1301: usb-transceiver@2c {
- compatible = "nxp,isp1301";
- reg = <0x2c>;
- };
-
- usbd@31020000 {
- compatible = "nxp,lpc3220-udc";
- reg = <0x31020000 0x300>;
- interrupt-parent = <&mic>;
- interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
- transceiver = <&isp1301>;
- };
+++ /dev/null
-* NXP LPC32xx SoC USB Device Controller (UDC)
-
-Required properties:
-- compatible: Must be "nxp,lpc3220-udc"
-- reg: Physical base address of the controller and length of memory mapped
- region.
-- interrupts: The USB interrupts:
- * USB Device Low Priority Interrupt
- * USB Device High Priority Interrupt
- * USB Device DMA Interrupt
- * External USB Transceiver Interrupt (OTG ATX)
-- transceiver: phandle of the associated ISP1301 device - this is necessary for
- the UDC controller for connecting to the USB physical layer
-
-Example:
-
- isp1301: usb-transceiver@2c {
- compatible = "nxp,isp1301";
- reg = <0x2c>;
- };
-
- usbd@31020000 {
- compatible = "nxp,lpc3220-udc";
- reg = <0x31020000 0x300>;
- interrupt-parent = <&mic>;
- interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
- transceiver = <&isp1301>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,lpc3220-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx SoC USB Device Controller (UDC)
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: nxp,lpc3220-udc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: USB Device Low Priority Interrupt
+ - description: USB Device High Priority Interrupt
+ - description: USB Device DMA Interrupt
+ - description: External USB Transceiver Interrupt (OTG ATX)
+
+ clocks:
+ maxItems: 1
+
+ transceiver:
+ description:
+ phandle of the associated ISP1301 device - this is necessary for
+ the UDC controller for connecting to the USB physical layer
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - transceiver
+
+additionalProperties: false
+
+examples:
+ - |
+ usbd@31020000 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x31020000 0x300>;
+ interrupt-parent = <&mic>;
+ interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+ transceiver = <&isp1301>;
+ };
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,ipq9574-dwc3
+ - qcom,milos-dwc3
- qcom,msm8953-dwc3
- qcom,msm8994-dwc3
- qcom,msm8996-dwc3
compatible:
contains:
enum:
+ - qcom,milos-dwc3
- qcom,qcm2290-dwc3
- qcom,qcs615-dwc3
- qcom,sar2130p-dwc3
compatible:
contains:
enum:
+ - qcom,milos-dwc3
- qcom,x1e80100-dwc3
then:
properties:
- renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
- renesas,usbhs-r9a07g054 # RZ/V2L
- renesas,usbhs-r9a08g045 # RZ/G3S
+ - renesas,usbhs-r9a09g056 # RZ/V2N
- renesas,usbhs-r9a09g057 # RZ/V2H(P)
- const: renesas,rzg2l-usbhs
"^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*": true
"^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
"^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
+ "^pool[0-3],.*": true
# Keep list in alphabetical order.
"^100ask,.*":
description: Arctic Sand
"^arcx,.*":
description: arcx Inc. / Archronix Inc.
+ "^argon40,.*":
+ description: Argon 40 Technologies Limited
"^ariaboard,.*":
description: Shanghai Novotech Co., Ltd. (Ariaboard)
"^aries,.*":
description: Shanghai Awinic Technology Co., Ltd.
"^axentia,.*":
description: Axentia Technologies AB
+ "^axiado,.*":
+ description: Axiado Corporation
"^axis,.*":
description: Axis Communications AB
"^azoteq,.*":
description: Cirrus Logic, Inc.
"^cisco,.*":
description: Cisco Systems, Inc.
+ "^cix,.*":
+ description: CIX Technology Group Co., Ltd.
"^clockwork,.*":
description: Clockwork Tech LLC
"^cloos,.*":
description: Diodes, Inc.
"^dioo,.*":
description: Dioo Microcircuit Co., Ltd
+ "^djn,.*":
+ description: Shenzhen DJN Optronics Technology Co., Ltd
"^dlc,.*":
description: DLC Display Co., Ltd.
"^dlg,.*":
description: Espressif Systems Co. Ltd.
"^est,.*":
description: ESTeem Wireless Modems
+ "^eswin,.*":
+ description: Beijing ESWIN Technology Group Co. Ltd.
"^ettus,.*":
description: NI Ettus Research
"^eukrea,.*":
description: Huawei Technologies Co., Ltd.
"^hugsun,.*":
description: Shenzhen Hugsun Technology Co. Ltd.
+ "^huiling,.*":
+ description: Shenzhen Huiling Information Technology Co., Ltd.
"^hwacom,.*":
description: HwaCom Systems Inc.
"^hxt,.*":
description: Jide Tech
"^joz,.*":
description: JOZ BV
+ "^jty,.*":
+ description: JTY
"^kam,.*":
description: Kamstrup A/S
"^karo,.*":
description: Nanjing Loongmasses Ltd.
"^lsi,.*":
description: LSI Corp. (LSI Logic)
+ "^luckfox,.*":
+ description: Shenzhen Luckfox Technology Co., Ltd.
"^lunzn,.*":
description: Shenzhen Lunzn Technology Co., Ltd.
"^luxul,.*":
description: Next Thing Co.
"^ni,.*":
description: National Instruments
+ "^nicera,.*":
+ description: Nippon Ceramic Co., Ltd.
"^nintendo,.*":
description: Nintendo
"^nlt,.*":
description: Recharge Véhicule Électrique (RVE) inc.
"^saef,.*":
description: Saef Technology Limited
+ "^sakurapi,.*":
+ description: SakuraPi.org
"^samsung,.*":
description: Samsung Semiconductor
"^samtec,.*":
- fsl,ls1012a-wdt
- fsl,ls1021a-wdt
- fsl,ls1043a-wdt
+ - fsl,ls1046a-wdt
- fsl,vf610-wdt
- const: fsl,imx21-wdt
- fsl,ls1012a-wdt
- fsl,ls1021a-wdt
- fsl,ls1043a-wdt
+ - fsl,ls1046a-wdt
then:
properties:
big-endian: false
- items:
- enum:
- mediatek,mt2701-wdt
+ - mediatek,mt6572-wdt
- mediatek,mt6582-wdt
- mediatek,mt6797-wdt
- mediatek,mt7622-wdt
reg:
maxItems: 1
+ clocks:
+ maxItems: 1
+
required:
- compatible
- reg
Properties
==========
-- DO make 'compatible' properties specific. DON'T use wildcards in compatible
- strings. DO use fallback compatibles when devices are the same as or a subset
- of prior implementations. DO add new compatibles in case there are new
- features or bugs.
+- DO make 'compatible' properties specific.
+
+ - DON'T use wildcards or device-family names in compatible strings.
+
+ - DO use fallback compatibles when devices are the same as or a superset of
+ prior implementations.
+
+ - DO add new compatibles in case there are new features or bugs.
+
+ - DO use a SoC-specific compatible for all SoC devices, followed by a
+ fallback if appropriate. SoC-specific compatibles are also preferred for
+ the fallbacks.
+
+ - DON'T use bus suffixes to encode the type of interface device is using.
+ The parent bus node already implies that interface. DON'T add the type of
+ device, if the device cannot be anything else.
- DO use a vendor prefix on device-specific property names. Consider if
properties could be common among devices of the same class. Check other
- DON'T redefine common properties. Just reference the definition and define
constraints specific to the device.
+- DON'T add properties to avoid a specific compatible. DON'T add properties if
+ they are implied by (deducible from) the compatible.
+
- DO use common property unit suffixes for properties with scientific units.
Recommended suffixes are listed at
https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml
- DO define properties in terms of constraints. How many entries? What are
- possible values? What is the order?
+ possible values? What is the order? All these constraints represent the ABI
+ as well.
+
+- DON'T make changes that break the ABI without explicit and detailed rationale
+ for why the changes have to be made and their impact. ABI impact goes beyond
+ the Linux kernel, because it also covers other open-source upstream projects.
+
Typical cases and caveats
=========================
- Phandle entries, like clocks/dmas/interrupts/resets, should always be
explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is
more than one phandle. When used, both of these fields need the same
- constraints (e.g. list of items).
+ constraints (e.g. list of items).
- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix,
e.g.: "tx" instead of "txirq" (for interrupt).
- "syscon" is not a generic property. Use vendor and type, e.g.
"vendor,power-manager-syscon".
+- Do not add instance index (IDs) properties or custom OF aliases. If the
+ devices have different programming model, they might need different
+ compatibles. If such devices use some other device in a different way, e.g.
+ they program the phy differently, use cell/phandle arguments.
+
+- Bindings files should be named like compatible: vendor,device.yaml. In case
+ of multiple compatibles in the binding, use one of the fallbacks or a more
+ generic name, yet still matching compatible style.
+
Board/SoC .dts Files
====================
Use YAML coding style (two-space indentation). For DTS examples in the schema,
preferred is four-space indentation.
+Place entries in 'properties' and 'required' sections in the same order, using
+style from Documentation/devicetree/bindings/dts-coding-style.rst.
+
Testing
-------
#define QCOM_ID_QCM8550 604
#define QCOM_ID_SM8750 618
#define QCOM_ID_IPQ5300 624
+#define QCOM_ID_SM7635 636
+#define QCOM_ID_SM6650 640
+#define QCOM_ID_SM6650P 641
#define QCOM_ID_IPQ5321 650
#define QCOM_ID_IPQ5424 651
+#define QCOM_ID_QCM6690 657
+#define QCOM_ID_QCS6690 658
#define QCOM_ID_IPQ5404 671
#define QCOM_ID_QCS9100 667
#define QCOM_ID_QCS8300 674
#define ASPEED_RESET_PCIE_DEV_OEN 20
#define ASPEED_RESET_PCIE_RC_O 19
#define ASPEED_RESET_PCIE_RC_OEN 18
+#define ASPEED_RESET_MAC2 12
+#define ASPEED_RESET_MAC1 11
#define ASPEED_RESET_PCI_DP 5
#define ASPEED_RESET_HACE 4
#define ASPEED_RESET_AHB 1
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright 2024-2025 Cix Technology Group Co., Ltd.
+ */
+
+#ifndef _DT_BINDINGS_CLK_CIX_SKY1_H
+#define _DT_BINDINGS_CLK_CIX_SKY1_H
+
+#define CLK_TREE_CPU_GICxCLK 0
+#define CLK_TREE_CPU_PPUCLK 1
+#define CLK_TREE_CPU_PERIPHCLK 2
+#define CLK_TREE_DSU_CLK 3
+#define CLK_TREE_DSU_PCLK 4
+#define CLK_TREE_CPU_CLK_BC0 5
+#define CLK_TREE_CPU_CLK_BC1 6
+#define CLK_TREE_CPU_CLK_BC2 7
+#define CLK_TREE_CPU_CLK_BC3 8
+#define CLK_TREE_CPU_CLK_MC0 9
+#define CLK_TREE_CPU_CLK_MC1 10
+#define CLK_TREE_CPU_CLK_MC2 11
+#define CLK_TREE_CPU_CLK_MC3 12
+#define CLK_TREE_CPU_CLK_LC0 13
+#define CLK_TREE_CPU_CLK_LC1 14
+#define CLK_TREE_CPU_CLK_LC2 15
+#define CLK_TREE_CPU_CLK_LC3 16
+#define CLK_TREE_CSI_CTRL0_PCLK 17
+#define CLK_TREE_CSI_CTRL1_PCLK 18
+#define CLK_TREE_CSI_CTRL2_PCLK 19
+#define CLK_TREE_CSI_CTRL3_PCLK 20
+#define CLK_TREE_CSI_DMA0_PCLK 21
+#define CLK_TREE_CSI_DMA1_PCLK 22
+#define CLK_TREE_CSI_DMA2_PCLK 23
+#define CLK_TREE_CSI_DMA3_PCLK 24
+#define CLK_TREE_CSI_PHY0_PSM 25
+#define CLK_TREE_CSI_PHY1_PSM 26
+#define CLK_TREE_CSI_PHY0_APBCLK 27
+#define CLK_TREE_CSI_PHY1_APBCLK 28
+#define CLK_TREE_FCH_APB_CLK 29
+#define CLK_TREE_GPU_CLK_400M 30
+#define CLK_TREE_GPU_CLK_CORE 31
+#define CLK_TREE_GPU_CLK_STACKS 32
+#define CLK_TREE_DP0_PIXEL0 33
+#define CLK_TREE_DP0_PIXEL1 34
+#define CLK_TREE_DP1_PIXEL0 35
+#define CLK_TREE_DP1_PIXEL1 36
+#define CLK_TREE_DP2_PIXEL0 37
+#define CLK_TREE_DP2_PIXEL1 38
+#define CLK_TREE_DP3_PIXEL0 39
+#define CLK_TREE_DP3_PIXEL1 40
+#define CLK_TREE_DP4_PIXEL0 41
+#define CLK_TREE_DP4_PIXEL1 42
+#define CLK_TREE_DPU_CLK 43
+#define CLK_TREE_DPU0_ACLK 44
+#define CLK_TREE_DPU1_ACLK 45
+#define CLK_TREE_DPU2_ACLK 46
+#define CLK_TREE_DPU3_ACLK 47
+#define CLK_TREE_DPU4_ACLK 48
+#define CLK_TREE_DPC0_VIDCLK0 49
+#define CLK_TREE_DPC0_VIDCLK1 50
+#define CLK_TREE_DPC1_VIDCLK0 51
+#define CLK_TREE_DPC1_VIDCLK1 52
+#define CLK_TREE_DPC2_VIDCLK0 53
+#define CLK_TREE_DPC2_VIDCLK1 54
+#define CLK_TREE_DPC3_VIDCLK0 55
+#define CLK_TREE_DPC3_VIDCLK1 56
+#define CLK_TREE_DPC4_VIDCLK0 57
+#define CLK_TREE_DPC4_VIDCLK1 58
+#define CLK_TREE_DPC0_APBCLK 59
+#define CLK_TREE_DPC1_APBCLK 60
+#define CLK_TREE_DPC2_APBCLK 61
+#define CLK_TREE_DPC3_APBCLK 62
+#define CLK_TREE_DPC4_APBCLK 63
+#define CLK_TREE_NPU_MEMCLK 64
+#define CLK_TREE_NPU_SYSCLK 65
+#define CLK_TREE_NPU_DBGCLK 66
+#define CLK_TREE_VPU_APBCLK 67
+#define CLK_TREE_ISP_ACLK 68
+#define CLK_TREE_ISP_SCLK 69
+#define CLK_TREE_AUDIO_CLK4 70
+#define CLK_TREE_AUDIO_CLK5 71
+#define CLK_TREE_CAMERA_MCLK0 72
+#define CLK_TREE_CAMERA_MCLK1 73
+#define CLK_TREE_CAMERA_MCLK2 74
+#define CLK_TREE_CAMERA_MCLK3 75
+#define CLK_TREE_AUDIO_CLK0 76
+#define CLK_TREE_AUDIO_CLK1 77
+#define CLK_TREE_AUDIO_CLK2 78
+#define CLK_TREE_AUDIO_CLK3 79
+#define CLK_TREE_MM_NI700_CLK 80
+#define CLK_TREE_SYS_NI700_CLK 81
+#define CLK_TREE_GMAC0_ACLK 82
+#define CLK_TREE_GMAC1_ACLK 83
+#define CLK_TREE_GMAC0_DIV_ACLK 84
+#define CLK_TREE_GMAC0_DIV_TXCLK 85
+#define CLK_TREE_GMAC0_RGMII0_TXCLK 86
+#define CLK_TREE_GMAC1_DIV_ACLK 87
+#define CLK_TREE_GMAC1_DIV_TXCLK 88
+#define CLK_TREE_GMAC1_RGMII0_TXCLK 89
+#define CLK_TREE_GMAC0_PCLK 90
+#define CLK_TREE_GMAC1_PCLK 91
+#define CLK_TREE_USB2_0_AXI_GATE 92
+#define CLK_TREE_USB2_0_APB_GATE 93
+#define CLK_TREE_USB2_1_AXI_GATE 94
+#define CLK_TREE_USB2_1_APB_GATE 95
+#define CLK_TREE_USB2_2_AXI_GATE 96
+#define CLK_TREE_USB2_2_APB_GATE 97
+#define CLK_TREE_USB2_3_AXI_GATE 98
+#define CLK_TREE_USB2_3_APB_GATE 99
+#define CLK_TREE_USB2_0_PHY_GATE 100
+#define CLK_TREE_USB2_1_PHY_GATE 101
+#define CLK_TREE_USB2_2_PHY_GATE 102
+#define CLK_TREE_USB2_3_PHY_GATE 103
+#define CLK_TREE_USB3C_DRD_AXI_GATE 104
+#define CLK_TREE_USB3C_DRD_APB_GATE 105
+#define CLK_TREE_USB3C_DRD_PHY2_GATE 106
+#define CLK_TREE_USB3C_DRD_PHY3_GATE 107
+#define CLK_TREE_USB3C_0_AXI_GATE 108
+#define CLK_TREE_USB3C_0_APB_GATE 109
+#define CLK_TREE_USB3C_0_PHY2_GATE 110
+#define CLK_TREE_USB3C_0_PHY3_GATE 111
+#define CLK_TREE_USB3C_1_AXI_GATE 112
+#define CLK_TREE_USB3C_1_APB_GATE 113
+#define CLK_TREE_USB3C_1_PHY2_GATE 114
+#define CLK_TREE_USB3C_1_PHY3_GATE 115
+#define CLK_TREE_USB3C_2_AXI_GATE 116
+#define CLK_TREE_USB3C_2_APB_GATE 117
+#define CLK_TREE_USB3C_2_PHY2_GATE 118
+#define CLK_TREE_USB3C_2_PHY3_GATE 119
+#define CLK_TREE_USB3A_0_AXI_GATE 120
+#define CLK_TREE_USB3A_0_APB_GATE 121
+#define CLK_TREE_USB3A_0_PHY2_GATE 122
+#define CLK_TREE_USB3A_1_AXI_GATE 123
+#define CLK_TREE_USB3A_1_APB_GATE 124
+#define CLK_TREE_USB3A_1_PHY2_GATE 125
+#define CLK_TREE_USB3A_PHY3_GATE 126
+#define CLK_TREE_USB2_0_CLK_SOF 127
+#define CLK_TREE_USB2_1_CLK_SOF 128
+#define CLK_TREE_USB2_2_CLK_SOF 129
+#define CLK_TREE_USB2_3_CLK_SOF 130
+#define CLK_TREE_USB3C_DRD_CLK_SOF 131
+#define CLK_TREE_USB3C_H0_CLK_SOF 132
+#define CLK_TREE_USB3C_H1_CLK_SOF 133
+#define CLK_TREE_USB3C_H2_CLK_SOF 134
+#define CLK_TREE_USB3A_H0_CLK_SOF 135
+#define CLK_TREE_USB3A_H1_CLK_SOF 136
+#define CLK_TREE_USB2_0_CLK_LPM 137
+#define CLK_TREE_USB2_1_CLK_LPM 138
+#define CLK_TREE_USB2_2_CLK_LPM 139
+#define CLK_TREE_USB2_3_CLK_LPM 140
+#define CLK_TREE_USB3C_DRD_CLK_LPM 141
+#define CLK_TREE_USB3C_H0_CLK_LPM 142
+#define CLK_TREE_USB3C_H1_CLK_LPM 143
+#define CLK_TREE_USB3C_H2_CLK_LPM 144
+#define CLK_TREE_USB3A_H0_CLK_LPM 145
+#define CLK_TREE_USB3A_H1_CLK_LPM 146
+#define CLK_TREE_USB2_0_PHY_REF 147
+#define CLK_TREE_USB2_1_PHY_REF 148
+#define CLK_TREE_USB2_2_PHY_REF 149
+#define CLK_TREE_USB2_3_PHY_REF 150
+#define CLK_TREE_USB3C_DRD_PHY_REF 151
+#define CLK_TREE_USB3C_H0_PHY_REF 152
+#define CLK_TREE_USB3C_H1_PHY_REF 153
+#define CLK_TREE_USB3C_H2_PHY_REF 154
+#define CLK_TREE_USB3A_H0_PHY_REF 155
+#define CLK_TREE_USB3A_H1_PHY_REF 156
+#define CLK_TREE_USB3C_DRD_PHY_x4_REF 157
+#define CLK_TREE_USB3C_H0_PHY_x4_REF 158
+#define CLK_TREE_USB3C_H1_PHY_x4_REF 159
+#define CLK_TREE_USB3C_H2_PHY_x4_REF 160
+#define CLK_TREE_USB3A_PHY_x2_REF 161
+#define CLK_TREE_PCIE_X8CTRL_APB 162
+#define CLK_TREE_PCIE_X4CTRL_APB 163
+#define CLK_TREE_PCIE_X2CTRL_APB 164
+#define CLK_TREE_PCIE_X1_0CTRL_APB 165
+#define CLK_TREE_PCIE_X1_1CTRL_APB 166
+#define CLK_TREE_PCIE_X8_PHY_APB 167
+#define CLK_TREE_PCIE_X4_PHY_APB 168
+#define CLK_TREE_PCIE_X211_PHY_APB 169
+#define CLK_TREE_PCIE_NI700_CLK 170
+#define CLK_TREE_PCIE_CTRL0_CLK 171
+#define CLK_TREE_PCIE_CTRL1_CLK 172
+#define CLK_TREE_PCIE_CTRL2_CLK 173
+#define CLK_TREE_PCIE_CTRL3_CLK 174
+#define CLK_TREE_PCIE_CTRL4_CLK 175
+#define CLK_TREE_CSI_CTRL0_SYSCLK 176
+#define CLK_TREE_CSI_CTRL1_SYSCLK 177
+#define CLK_TREE_CSI_CTRL2_SYSCLK 178
+#define CLK_TREE_CSI_CTRL3_SYSCLK 179
+#define CLK_TREE_CSI_CTRL0_PIXEL0_CLK 180
+#define CLK_TREE_CSI_CTRL0_PIXEL1_CLK 181
+#define CLK_TREE_CSI_CTRL0_PIXEL2_CLK 182
+#define CLK_TREE_CSI_CTRL0_PIXEL3_CLK 183
+#define CLK_TREE_CSI_CTRL1_PIXEL0_CLK 184
+#define CLK_TREE_CSI_CTRL2_PIXEL0_CLK 185
+#define CLK_TREE_CSI_CTRL2_PIXEL1_CLK 186
+#define CLK_TREE_CSI_CTRL2_PIXEL2_CLK 187
+#define CLK_TREE_CSI_CTRL2_PIXEL3_CLK 188
+#define CLK_TREE_CSI_CTRL3_PIXEL0_CLK 189
+#define CLK_TREE_CI700_GCLK0 190
+#define CLK_TREE_DDRC0_ACLK_CLK 191
+#define CLK_TREE_DDRC1_ACLK_CLK 192
+#define CLK_TREE_DDRC2_ACLK_CLK 193
+#define CLK_TREE_DDRC3_ACLK_CLK 194
+#define CLK_TREE_DDRC0_DFICLK_CLK 195
+#define CLK_TREE_DDRC1_DFICLK_CLK 196
+#define CLK_TREE_DDRC2_DFICLK_CLK 197
+#define CLK_TREE_DDRC3_DFICLK_CLK 198
+#define CLK_TREE_PHY0_SYNC_CLK 199
+#define CLK_TREE_PHY1_SYNC_CLK 200
+#define CLK_TREE_PHY2_SYNC_CLK 201
+#define CLK_TREE_PHY3_SYNC_CLK 202
+#define CLK_TREE_PHY0_BYPASS_CLK 203
+#define CLK_TREE_PHY1_BYPASS_CLK 204
+#define CLK_TREE_PHY2_BYPASS_CLK 205
+#define CLK_TREE_PHY3_BYPASS_CLK 206
+#define CLK_TREE_DDRC_0_APB 207
+#define CLK_TREE_DDRC_1_APB 208
+#define CLK_TREE_DDRC_2_APB 209
+#define CLK_TREE_DDRC_3_APB 210
+#define CLK_TREE_TZC400_0_APB 211
+#define CLK_TREE_TZC400_1_APB 212
+#define CLK_TREE_TZC400_2_APB 213
+#define CLK_TREE_TZC400_3_APB 214
+#define CLK_TREE_S5_SENSOR_HUB_25M 215
+#define CLK_TREE_S5_SENSOR_HUB_400M 216
+#define CLK_TREE_S5_CSS600_100M 217
+#define CLK_TREE_S5_DFD_800M 218
+#define CLK_TREE_S5_CSU_SE_800M 219
+#define CLK_TREE_S5_CSU_PM_800M 220
+#define CLK_TREE_PCIE_REF_B0 221
+#define CLK_TREE_PCIE_REF_B1 222
+#define CLK_TREE_PCIE_REF_B2 223
+#define CLK_TREE_PCIE_REF_B3 224
+#define CLK_TREE_PCIE_REF_B4 225
+#define CLK_TREE_PCIE_REF_PHY_X8 226
+#define CLK_TREE_PCIE_REF_PHY_X4 227
+#define CLK_TREE_PCIE_REF_PHY_X211 228
+#define CLK_TREE_GMAC_REC_CLK 229
+#define CLK_TREE_GPUTOP_PLL 230
+#define CLK_TREE_GPUCORE_PLL 231
+#define CLK_TREE_CPU_PLL_LIT 232
+#define CLK_TREE_CPU_PLL0 233
+#define CLK_TREE_CPU_PLL1 234
+#define CLK_TREE_CPU_PLL2 235
+#define CLK_TREE_CPU_PLL3 236
+#define CLK_TREE_FCH_I3C0_FUNC 237
+#define CLK_TREE_FCH_I3C1_FUNC 238
+#define CLK_TREE_FCH_DMA_ACLK 239
+#define CLK_TREE_FCH_XSPI_FUNC 240
+#define CLK_TREE_FCH_XSPI_MACLK 241
+#define CLK_TREE_FCH_TIMER_FUN 242
+#define CLK_TREE_FCH_APB_IO_S0 243
+#define CLK_TREE_FCH_I3C0_APB 244
+#define CLK_TREE_FCH_I3C1_APB 245
+#define CLK_TREE_FCH_UART0_APB 246
+#define CLK_TREE_FCH_UART1_APB 247
+#define CLK_TREE_FCH_UART2_APB 248
+#define CLK_TREE_FCH_UART3_APB 249
+#define CLK_TREE_FCH_SPI0_APB 250
+#define CLK_TREE_FCH_SPI1_APB 251
+#define CLK_TREE_FCH_XSPI_APB 252
+#define CLK_TREE_FCH_I2C0_APB 253
+#define CLK_TREE_FCH_I2C1_APB 254
+#define CLK_TREE_FCH_I2C2_APB 255
+#define CLK_TREE_FCH_I2C3_APB 256
+#define CLK_TREE_FCH_I2C4_APB 257
+#define CLK_TREE_FCH_I2C5_APB 258
+#define CLK_TREE_FCH_I2C6_APB 259
+#define CLK_TREE_FCH_I2C7_APB 260
+#define CLK_TREE_FCH_TIMER_APB 261
+#define CLK_TREE_FCH_GPIO_APB 262
+#define CLK_TREE_FCH_UART0_FUNC 263
+#define CLK_TREE_FCH_UART1_FUNC 264
+#define CLK_TREE_FCH_UART2_FUNC 265
+#define CLK_TREE_FCH_UART3_FUNC 266
+/* 267~271 not used by AP, skip */
+#define CLK_TREE_GPU_CLK_200M 272
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Copyright (c) 2022-2025, NVIDIA CORPORATION. All rights reserved. */
+
+#ifndef DT_BINDINGS_CLOCK_NVIDIA_TEGRA264_H
+#define DT_BINDINGS_CLOCK_NVIDIA_TEGRA264_H
+
+#define TEGRA264_CLK_OSC 1
+#define TEGRA264_CLK_CLK_S 2
+#define TEGRA264_CLK_JTAG_REG 3
+#define TEGRA264_CLK_SPLL 4
+#define TEGRA264_CLK_SPLL_OUT0 5
+#define TEGRA264_CLK_SPLL_OUT1 6
+#define TEGRA264_CLK_SPLL_OUT2 7
+#define TEGRA264_CLK_SPLL_OUT3 8
+#define TEGRA264_CLK_SPLL_OUT4 9
+#define TEGRA264_CLK_SPLL_OUT5 10
+#define TEGRA264_CLK_SPLL_OUT6 11
+#define TEGRA264_CLK_SPLL_OUT7 12
+#define TEGRA264_CLK_AON_I2C 13
+#define TEGRA264_CLK_HOST1X 14
+#define TEGRA264_CLK_ISP 15
+#define TEGRA264_CLK_ISP1 16
+#define TEGRA264_CLK_ISP_ROOT 17
+#define TEGRA264_CLK_NAFLL_PVA0_CORE 18
+#define TEGRA264_CLK_NAFLL_PVA0_VPS 19
+#define TEGRA264_CLK_NVCSI 20
+#define TEGRA264_CLK_NVCSILP 21
+#define TEGRA264_CLK_PLLP_OUT0 22
+#define TEGRA264_CLK_PVA0_CPU_AXI 23
+#define TEGRA264_CLK_PVA0_VPS 24
+#define TEGRA264_CLK_PWM10 25
+#define TEGRA264_CLK_PWM2 26
+#define TEGRA264_CLK_PWM3 27
+#define TEGRA264_CLK_PWM4 28
+#define TEGRA264_CLK_PWM5 29
+#define TEGRA264_CLK_PWM9 30
+#define TEGRA264_CLK_QSPI0 31
+#define TEGRA264_CLK_QSPI0_2X_PM 32
+#define TEGRA264_CLK_RCE1_CPU 33
+#define TEGRA264_CLK_RCE1_NIC 34
+#define TEGRA264_CLK_RCE_CPU 35
+#define TEGRA264_CLK_RCE_NIC 36
+#define TEGRA264_CLK_SE 37
+#define TEGRA264_CLK_SEU1 38
+#define TEGRA264_CLK_SEU2 39
+#define TEGRA264_CLK_SEU3 40
+#define TEGRA264_CLK_SE_ROOT 41
+#define TEGRA264_CLK_SPI1 42
+#define TEGRA264_CLK_SPI2 43
+#define TEGRA264_CLK_SPI3 44
+#define TEGRA264_CLK_SPI4 45
+#define TEGRA264_CLK_SPI5 46
+#define TEGRA264_CLK_TOP_I2C 47
+#define TEGRA264_CLK_TSEC 48
+#define TEGRA264_CLK_TSEC_PKA 49
+#define TEGRA264_CLK_UART0 50
+#define TEGRA264_CLK_UART10 51
+#define TEGRA264_CLK_UART11 52
+#define TEGRA264_CLK_UART4 53
+#define TEGRA264_CLK_UART5 54
+#define TEGRA264_CLK_UART8 55
+#define TEGRA264_CLK_UART9 56
+#define TEGRA264_CLK_VI 57
+#define TEGRA264_CLK_VI1 58
+#define TEGRA264_CLK_VIC 59
+#define TEGRA264_CLK_VI_ROOT 60
+#define TEGRA264_CLK_DISPPLL 61
+#define TEGRA264_CLK_SPPLL0 62
+#define TEGRA264_CLK_SPPLL0_CLKOUT1A 63
+#define TEGRA264_CLK_SPPLL0_CLKOUT2A 64
+#define TEGRA264_CLK_SPPLL1 65
+#define TEGRA264_CLK_VPLL0 66
+#define TEGRA264_CLK_VPLL1 67
+#define TEGRA264_CLK_VPLL2 68
+#define TEGRA264_CLK_VPLL3 69
+#define TEGRA264_CLK_VPLL4 70
+#define TEGRA264_CLK_VPLL5 71
+#define TEGRA264_CLK_VPLL6 72
+#define TEGRA264_CLK_VPLL7 73
+#define TEGRA264_CLK_RG0_DIV 74
+#define TEGRA264_CLK_RG1_DIV 75
+#define TEGRA264_CLK_RG2_DIV 76
+#define TEGRA264_CLK_RG3_DIV 77
+#define TEGRA264_CLK_RG4_DIV 78
+#define TEGRA264_CLK_RG5_DIV 79
+#define TEGRA264_CLK_RG6_DIV 80
+#define TEGRA264_CLK_RG7_DIV 81
+#define TEGRA264_CLK_RG0 82
+#define TEGRA264_CLK_RG1 83
+#define TEGRA264_CLK_RG2 84
+#define TEGRA264_CLK_RG3 85
+#define TEGRA264_CLK_RG4 86
+#define TEGRA264_CLK_RG5 87
+#define TEGRA264_CLK_RG6 88
+#define TEGRA264_CLK_RG7 89
+#define TEGRA264_CLK_DISP 90
+#define TEGRA264_CLK_DSC 91
+#define TEGRA264_CLK_DSC_ROOT 92
+#define TEGRA264_CLK_HUB 93
+#define TEGRA264_CLK_VPLLX_SOR0_MUXED 94
+#define TEGRA264_CLK_VPLLX_SOR1_MUXED 95
+#define TEGRA264_CLK_VPLLX_SOR2_MUXED 96
+#define TEGRA264_CLK_VPLLX_SOR3_MUXED 97
+#define TEGRA264_CLK_LINKA_SYM 98
+#define TEGRA264_CLK_LINKB_SYM 99
+#define TEGRA264_CLK_LINKC_SYM 100
+#define TEGRA264_CLK_LINKD_SYM 101
+#define TEGRA264_CLK_PRE_SOR0 102
+#define TEGRA264_CLK_PRE_SOR1 103
+#define TEGRA264_CLK_PRE_SOR2 104
+#define TEGRA264_CLK_PRE_SOR3 105
+#define TEGRA264_CLK_SOR0_PLL_REF 106
+#define TEGRA264_CLK_SOR1_PLL_REF 107
+#define TEGRA264_CLK_SOR2_PLL_REF 108
+#define TEGRA264_CLK_SOR3_PLL_REF 109
+#define TEGRA264_CLK_SOR0_PAD 110
+#define TEGRA264_CLK_SOR1_PAD 111
+#define TEGRA264_CLK_SOR2_PAD 112
+#define TEGRA264_CLK_SOR3_PAD 113
+#define TEGRA264_CLK_SOR0_REF 114
+#define TEGRA264_CLK_SOR1_REF 115
+#define TEGRA264_CLK_SOR2_REF 116
+#define TEGRA264_CLK_SOR3_REF 117
+#define TEGRA264_CLK_SOR0_DIV 118
+#define TEGRA264_CLK_SOR1_DIV 119
+#define TEGRA264_CLK_SOR2_DIV 120
+#define TEGRA264_CLK_SOR3_DIV 121
+#define TEGRA264_CLK_SOR0 122
+#define TEGRA264_CLK_SOR1 123
+#define TEGRA264_CLK_SOR2 124
+#define TEGRA264_CLK_SOR3 125
+#define TEGRA264_CLK_SF0_SOR 126
+#define TEGRA264_CLK_SF1_SOR 127
+#define TEGRA264_CLK_SF2_SOR 128
+#define TEGRA264_CLK_SF3_SOR 129
+#define TEGRA264_CLK_SF4_SOR 130
+#define TEGRA264_CLK_SF5_SOR 131
+#define TEGRA264_CLK_SF6_SOR 132
+#define TEGRA264_CLK_SF7_SOR 133
+#define TEGRA264_CLK_SF0 134
+#define TEGRA264_CLK_SF1 135
+#define TEGRA264_CLK_SF2 136
+#define TEGRA264_CLK_SF3 137
+#define TEGRA264_CLK_SF4 138
+#define TEGRA264_CLK_SF5 139
+#define TEGRA264_CLK_SF6 140
+#define TEGRA264_CLK_SF7 141
+#define TEGRA264_CLK_MAUD 142
+#define TEGRA264_CLK_AZA_2XBIT 143
+#define TEGRA264_CLK_DCE_CPU 144
+#define TEGRA264_CLK_DCE_NIC 145
+#define TEGRA264_CLK_PLLC4 146
+#define TEGRA264_CLK_PLLC4_OUT0 147
+#define TEGRA264_CLK_PLLC4_OUT1 148
+#define TEGRA264_CLK_PLLC4_MUXED 149
+#define TEGRA264_CLK_SDMMC1 150
+#define TEGRA264_CLK_SDMMC_LEGACY_TM 151
+#define TEGRA264_CLK_PLLC0 152
+#define TEGRA264_CLK_NAFLL_BPMP 153
+#define TEGRA264_CLK_PLLP_OUT_PDIV 154
+#define TEGRA264_CLK_DISP_ROOT 155
+#define TEGRA264_CLK_ADSP 156
+#define TEGRA264_CLK_PLLA 157
+#define TEGRA264_CLK_PLLA1 158
+#define TEGRA264_CLK_PLLA1_OUT1 159
+#define TEGRA264_CLK_PLLAON 160
+#define TEGRA264_CLK_PLLAON_APE 161
+#define TEGRA264_CLK_PLLA_OUT0 162
+#define TEGRA264_CLK_AHUB 163
+#define TEGRA264_CLK_APE 164
+#define TEGRA264_CLK_I2S1_SCLK_IN 165
+#define TEGRA264_CLK_I2S2_SCLK_IN 166
+#define TEGRA264_CLK_I2S3_SCLK_IN 167
+#define TEGRA264_CLK_I2S4_SCLK_IN 168
+#define TEGRA264_CLK_I2S5_SCLK_IN 169
+#define TEGRA264_CLK_I2S6_SCLK_IN 170
+#define TEGRA264_CLK_I2S7_SCLK_IN 171
+#define TEGRA264_CLK_I2S8_SCLK_IN 172
+#define TEGRA264_CLK_I2S9_SCLK_IN 173
+#define TEGRA264_CLK_I2S1_AUDIO_SYNC 174
+#define TEGRA264_CLK_I2S2_AUDIO_SYNC 175
+#define TEGRA264_CLK_I2S3_AUDIO_SYNC 176
+#define TEGRA264_CLK_I2S4_AUDIO_SYNC 177
+#define TEGRA264_CLK_I2S5_AUDIO_SYNC 178
+#define TEGRA264_CLK_I2S6_AUDIO_SYNC 179
+#define TEGRA264_CLK_I2S7_AUDIO_SYNC 180
+#define TEGRA264_CLK_I2S8_AUDIO_SYNC 181
+#define TEGRA264_CLK_DMIC1_AUDIO_SYNC 182
+#define TEGRA264_CLK_DSPK1_AUDIO_SYNC 183
+#define TEGRA264_CLK_I2S1 184
+#define TEGRA264_CLK_I2S2 185
+#define TEGRA264_CLK_I2S3 186
+#define TEGRA264_CLK_I2S4 187
+#define TEGRA264_CLK_I2S5 188
+#define TEGRA264_CLK_I2S6 189
+#define TEGRA264_CLK_I2S7 190
+#define TEGRA264_CLK_I2S8 191
+#define TEGRA264_CLK_I2S9 192
+#define TEGRA264_CLK_DMIC1 193
+#define TEGRA264_CLK_DMIC5 194
+#define TEGRA264_CLK_DSPK1 195
+#define TEGRA264_CLK_AON_CPU 196
+#define TEGRA264_CLK_AON_NIC 197
+#define TEGRA264_CLK_BPMP 198
+#define TEGRA264_CLK_AXI_CBB 199
+#define TEGRA264_CLK_FUSE 200
+#define TEGRA264_CLK_TSENSE 201
+#define TEGRA264_CLK_CSITE 202
+#define TEGRA264_CLK_HCSITE 203
+#define TEGRA264_CLK_DBGAPB 204
+#define TEGRA264_CLK_LA 205
+#define TEGRA264_CLK_PLLREFGP 206
+#define TEGRA264_CLK_PLLE0 207
+#define TEGRA264_CLK_UPHY0_PLL0_XDIG 208
+#define TEGRA264_CLK_EQOS_APP 209
+#define TEGRA264_CLK_EQOS_MAC 210
+#define TEGRA264_CLK_EQOS_MACSEC 211
+#define TEGRA264_CLK_EQOS_TX_PCS 212
+#define TEGRA264_CLK_MGBES_PTP_REF 213
+#define TEGRA264_CLK_MGBE0_UPHY1_PLL_XDIG 214
+#define TEGRA264_CLK_MGBE0_TX_PCS 215
+#define TEGRA264_CLK_MGBE0_MAC 216
+#define TEGRA264_CLK_MGBE0_MACSEC 217
+#define TEGRA264_CLK_MGBE0_APP 218
+#define TEGRA264_CLK_MGBE1_UPHY1_PLL_XDIG 219
+#define TEGRA264_CLK_MGBE1_TX_PCS 220
+#define TEGRA264_CLK_MGBE1_MAC 221
+#define TEGRA264_CLK_MGBE1_MACSEC 222
+#define TEGRA264_CLK_MGBE1_APP 223
+#define TEGRA264_CLK_MGBE2_UPHY1_PLL_XDIG 224
+#define TEGRA264_CLK_MGBE2_TX_PCS 225
+#define TEGRA264_CLK_MGBE2_MAC 226
+#define TEGRA264_CLK_MGBE2_MACSEC 227
+#define TEGRA264_CLK_MGBE2_APP 228
+#define TEGRA264_CLK_MGBE3_UPHY1_PLL_XDIG 229
+#define TEGRA264_CLK_MGBE3_TX_PCS 230
+#define TEGRA264_CLK_MGBE3_MAC 231
+#define TEGRA264_CLK_MGBE3_MACSEC 232
+#define TEGRA264_CLK_MGBE3_APP 233
+#define TEGRA264_CLK_PLLREFUFS 234
+#define TEGRA264_CLK_PLLREFUFS_CLKOUT624 235
+#define TEGRA264_CLK_PLLREFUFS_REFCLKOUT 236
+#define TEGRA264_CLK_PLLREFUFS_UFSDEV_REFCLKOUT 237
+#define TEGRA264_CLK_UFSHC_CG_SYS 238
+#define TEGRA264_CLK_MPHY_L0_RX_LS_BIT_DIV 239
+#define TEGRA264_CLK_MPHY_L0_RX_LS_BIT 240
+#define TEGRA264_CLK_MPHY_L0_RX_LS_SYMB_DIV 241
+#define TEGRA264_CLK_MPHY_L0_RX_HS_SYMB_DIV 242
+#define TEGRA264_CLK_MPHY_L0_RX_SYMB 243
+#define TEGRA264_CLK_MPHY_L0_UPHY_TX_FIFO 244
+#define TEGRA264_CLK_MPHY_L0_TX_LS_3XBIT_DIV 245
+#define TEGRA264_CLK_MPHY_L0_TX_LS_SYMB_DIV 246
+#define TEGRA264_CLK_UPHY0_PLL4_XDIG 247
+#define TEGRA264_CLK_MPHY_L0_TX_HS_SYMB_DIV 248
+#define TEGRA264_CLK_MPHY_L0_TX_SYMB 249
+#define TEGRA264_CLK_MPHY_L0_TX_LS_3XBIT 250
+#define TEGRA264_CLK_MPHY_L0_RX_ANA 251
+#define TEGRA264_CLK_MPHY_L1_RX_ANA 252
+#define TEGRA264_CLK_MPHY_TX_1MHZ_REF 253
+#define TEGRA264_CLK_MPHY_CORE_PLL_FIXED 254
+#define TEGRA264_CLK_MPHY_IOBIST 255
+#define TEGRA264_CLK_UFSHC_CG_SYS_DIV 256
+#define TEGRA264_CLK_XUSB1_CORE 257
+#define TEGRA264_CLK_XUSB1_FALCON 258
+#define TEGRA264_CLK_XUSB1_FS 259
+#define TEGRA264_CLK_XUSB1_SS 260
+#define TEGRA264_CLK_UPHY0_USB_P0_RX_CORE 261
+#define TEGRA264_CLK_UPHY0_USB_P1_RX_CORE 262
+#define TEGRA264_CLK_UPHY0_USB_P2_RX_CORE 263
+#define TEGRA264_CLK_UPHY0_USB_P3_RX_CORE 264
+#define TEGRA264_CLK_XUSB1_CLK480M_NVWRAP_CORE 265
+#define TEGRA264_CLK_XUSB1_CORE_HOST 266
+#define TEGRA264_CLK_XUSB1_CORE_DEV 267
+#define TEGRA264_CLK_XUSB1_CORE_SUPERSPEED 268
+#define TEGRA264_CLK_XUSB1_FALCON_HOST 269
+#define TEGRA264_CLK_XUSB1_FALCON_SUPERSPEED 270
+#define TEGRA264_CLK_XUSB1_FS_HOST 271
+#define TEGRA264_CLK_XUSB1_FS_DEV 272
+#define TEGRA264_CLK_XUSB1_HS_HSICP 273
+#define TEGRA264_CLK_XUSB1_SS_DEV 274
+#define TEGRA264_CLK_XUSB1_SS_SUPERSPEED 275
+#define TEGRA264_CLK_AON_TOUCH 276
+#define TEGRA264_CLK_AUD_MCLK 277
+#define TEGRA264_CLK_EXTPERIPH1 278
+#define TEGRA264_CLK_EXTPERIPH2 279
+#define TEGRA264_CLK_EXTPERIPH3 280
+#define TEGRA264_CLK_EXTPERIPH4 281
+#define TEGRA264_CLK_JTAG_REG_UNGATED 282
+#define TEGRA264_CLK_IST_BUS 283
+#define TEGRA264_CLK_IST_BUS_RIST_MCC 284
+#define TEGRA264_CLK_MATHS_SEC_RIST 285
+#define TEGRA264_CLK_NAFLL_IST 286
+#define TEGRA264_CLK_RIST_ROOT 287
+#define TEGRA264_CLK_IST_CONTROLLER_RIST 288
+#define TEGRA264_CLK_MSS_ENCRYPT 289
+#define TEGRA264_CLK_EMC 290
+#define TEGRA264_CLK_SPPLL0_CLKOUT100 291
+#define TEGRA264_CLK_SPPLL0_CLKOUT270 292
+#define TEGRA264_CLK_SPPLL1_CLKOUT100 293
+#define TEGRA264_CLK_SPPLL1_CLKOUT270 294
+#define TEGRA264_CLK_DP_LINKA_REF 295
+#define TEGRA264_CLK_DP_LINKB_REF 296
+#define TEGRA264_CLK_DP_LINKC_REF 297
+#define TEGRA264_CLK_DP_LINKD_REF 298
+#define TEGRA264_CLK_PLLNVCSI 299
+#define TEGRA264_CLK_PLLBPMPCAM 300
+#define TEGRA264_CLK_UTMI_PLL1 301
+#define TEGRA264_CLK_UTMI_PLL1_CLKOUT48 302
+#define TEGRA264_CLK_UTMI_PLL1_CLKOUT60 303
+#define TEGRA264_CLK_UTMI_PLL1_CLKOUT480 304
+#define TEGRA264_CLK_NAFLL_ISP 305
+#define TEGRA264_CLK_NAFLL_RCE 306
+#define TEGRA264_CLK_NAFLL_RCE1 307
+#define TEGRA264_CLK_NAFLL_SE 308
+#define TEGRA264_CLK_NAFLL_VI 309
+#define TEGRA264_CLK_NAFLL_VIC 310
+#define TEGRA264_CLK_NAFLL_DCE 311
+#define TEGRA264_CLK_NAFLL_TSEC 312
+#define TEGRA264_CLK_NAFLL_CPAIR0 313
+#define TEGRA264_CLK_NAFLL_CPAIR1 314
+#define TEGRA264_CLK_NAFLL_CPAIR2 315
+#define TEGRA264_CLK_NAFLL_CPAIR3 316
+#define TEGRA264_CLK_NAFLL_CPAIR4 317
+#define TEGRA264_CLK_NAFLL_CPAIR5 318
+#define TEGRA264_CLK_NAFLL_CPAIR6 319
+#define TEGRA264_CLK_NAFLL_GPU_SYS 320
+#define TEGRA264_CLK_NAFLL_GPU_NVD 321
+#define TEGRA264_CLK_NAFLL_GPU_UPROC 322
+#define TEGRA264_CLK_NAFLL_GPU_GPC0 323
+#define TEGRA264_CLK_NAFLL_GPU_GPC1 324
+#define TEGRA264_CLK_NAFLL_GPU_GPC2 325
+#define TEGRA264_CLK_SOR_LINKA_INPUT 326
+#define TEGRA264_CLK_SOR_LINKB_INPUT 327
+#define TEGRA264_CLK_SOR_LINKC_INPUT 328
+#define TEGRA264_CLK_SOR_LINKD_INPUT 329
+#define TEGRA264_CLK_SOR_LINKA_AFIFO 330
+#define TEGRA264_CLK_SOR_LINKB_AFIFO 331
+#define TEGRA264_CLK_SOR_LINKC_AFIFO 332
+#define TEGRA264_CLK_SOR_LINKD_AFIFO 333
+#define TEGRA264_CLK_I2S1_PAD_M 334
+#define TEGRA264_CLK_I2S2_PAD_M 335
+#define TEGRA264_CLK_I2S3_PAD_M 336
+#define TEGRA264_CLK_I2S4_PAD_M 337
+#define TEGRA264_CLK_I2S5_PAD_M 338
+#define TEGRA264_CLK_I2S6_PAD_M 339
+#define TEGRA264_CLK_I2S7_PAD_M 340
+#define TEGRA264_CLK_I2S8_PAD_M 341
+#define TEGRA264_CLK_I2S9_PAD_M 342
+#define TEGRA264_CLK_BPMP_NIC 343
+#define TEGRA264_CLK_CLK1M 344
+#define TEGRA264_CLK_RDET 345
+#define TEGRA264_CLK_ADC_SOC_REF 346
+#define TEGRA264_CLK_UPHY0_PLL0_TXREF 347
+#define TEGRA264_CLK_EQOS_TX 348
+#define TEGRA264_CLK_EQOS_TX_M 349
+#define TEGRA264_CLK_EQOS_RX_PCS_IN 350
+#define TEGRA264_CLK_EQOS_RX_PCS_M 351
+#define TEGRA264_CLK_EQOS_RX_IN 352
+#define TEGRA264_CLK_EQOS_RX 353
+#define TEGRA264_CLK_EQOS_RX_M 354
+#define TEGRA264_CLK_MGBE0_UPHY1_PLL_TXREF 355
+#define TEGRA264_CLK_MGBE0_TX 356
+#define TEGRA264_CLK_MGBE0_TX_M 357
+#define TEGRA264_CLK_MGBE0_RX_PCS_IN 358
+#define TEGRA264_CLK_MGBE0_RX_PCS_M 359
+#define TEGRA264_CLK_MGBE0_RX_IN 360
+#define TEGRA264_CLK_MGBE0_RX_M 361
+#define TEGRA264_CLK_MGBE1_UPHY1_PLL_TXREF 362
+#define TEGRA264_CLK_MGBE1_TX 363
+#define TEGRA264_CLK_MGBE1_TX_M 364
+#define TEGRA264_CLK_MGBE1_RX_PCS_IN 365
+#define TEGRA264_CLK_MGBE1_RX_PCS_M 366
+#define TEGRA264_CLK_MGBE1_RX_IN 367
+#define TEGRA264_CLK_MGBE1_RX_M 368
+#define TEGRA264_CLK_MGBE2_UPHY1_PLL_TXREF 369
+#define TEGRA264_CLK_MGBE2_TX 370
+#define TEGRA264_CLK_MGBE2_TX_M 371
+#define TEGRA264_CLK_MGBE2_RX_PCS_IN 372
+#define TEGRA264_CLK_MGBE2_RX_PCS_M 373
+#define TEGRA264_CLK_MGBE2_RX_IN 374
+#define TEGRA264_CLK_MGBE2_RX_M 375
+#define TEGRA264_CLK_MGBE3_UPHY1_PLL_TXREF 376
+#define TEGRA264_CLK_MGBE3_TX 377
+#define TEGRA264_CLK_MGBE3_TX_M 378
+#define TEGRA264_CLK_MGBE3_RX_PCS_IN 379
+#define TEGRA264_CLK_MGBE3_RX_PCS_M 380
+#define TEGRA264_CLK_MGBE3_RX_IN 381
+#define TEGRA264_CLK_MGBE3_RX_M 382
+#define TEGRA264_CLK_UPHY0_USB_P0_TX_CORE 383
+#define TEGRA264_CLK_UPHY0_USB_P1_TX_CORE 384
+#define TEGRA264_CLK_UPHY0_USB_P2_TX_CORE 385
+#define TEGRA264_CLK_UPHY0_USB_P3_TX_CORE 386
+#define TEGRA264_CLK_UPHY0_USB_P0_TX 387
+#define TEGRA264_CLK_UPHY0_USB_P1_TX 388
+#define TEGRA264_CLK_UPHY0_USB_P2_TX 389
+#define TEGRA264_CLK_UPHY0_USB_P3_TX 390
+#define TEGRA264_CLK_UPHY0_USB_P0_RX_IN 391
+#define TEGRA264_CLK_UPHY0_USB_P1_RX_IN 392
+#define TEGRA264_CLK_UPHY0_USB_P2_RX_IN 393
+#define TEGRA264_CLK_UPHY0_USB_P3_RX_IN 394
+#define TEGRA264_CLK_UPHY0_USB_P0_RX_M 395
+#define TEGRA264_CLK_UPHY0_USB_P1_RX_M 396
+#define TEGRA264_CLK_UPHY0_USB_P2_RX_M 397
+#define TEGRA264_CLK_UPHY0_USB_P3_RX_M 398
+#define TEGRA264_CLK_UPHY0_LANE0_TX_M 399
+#define TEGRA264_CLK_PCIE_C1_XCLK_NOBG_M 400
+#define TEGRA264_CLK_PCIE_C2_XCLK_NOBG_M 401
+#define TEGRA264_CLK_PCIE_C3_XCLK_NOBG_M 402
+#define TEGRA264_CLK_PCIE_C4_XCLK_NOBG_M 403
+#define TEGRA264_CLK_PCIE_C5_XCLK_NOBG_M 404
+#define TEGRA264_CLK_PCIE_C1_L0_RX_M 405
+#define TEGRA264_CLK_PCIE_C1_L1_RX_M 406
+#define TEGRA264_CLK_PCIE_C1_L2_RX_M 407
+#define TEGRA264_CLK_PCIE_C1_L3_RX_M 408
+#define TEGRA264_CLK_PCIE_C2_L0_RX_M 409
+#define TEGRA264_CLK_PCIE_C2_L1_RX_M 410
+#define TEGRA264_CLK_PCIE_C2_L2_RX_M 411
+#define TEGRA264_CLK_PCIE_C2_L3_RX_M 412
+#define TEGRA264_CLK_PCIE_C3_L0_RX_M 413
+#define TEGRA264_CLK_PCIE_C3_L1_RX_M 414
+#define TEGRA264_CLK_PCIE_C4_L0_RX_M 415
+#define TEGRA264_CLK_PCIE_C4_L1_RX_M 416
+#define TEGRA264_CLK_PCIE_C4_L2_RX_M 417
+#define TEGRA264_CLK_PCIE_C4_L3_RX_M 418
+#define TEGRA264_CLK_PCIE_C4_L4_RX_M 419
+#define TEGRA264_CLK_PCIE_C4_L5_RX_M 420
+#define TEGRA264_CLK_PCIE_C4_L6_RX_M 421
+#define TEGRA264_CLK_PCIE_C4_L7_RX_M 422
+#define TEGRA264_CLK_PCIE_C5_L0_RX_M 423
+#define TEGRA264_CLK_PCIE_C5_L1_RX_M 424
+#define TEGRA264_CLK_PCIE_C5_L2_RX_M 425
+#define TEGRA264_CLK_PCIE_C5_L3_RX_M 426
+#define TEGRA264_CLK_MPHY_L0_RX_PWM_BIT_M 427
+#define TEGRA264_CLK_MPHY_L1_RX_PWM_BIT_M 428
+#define TEGRA264_CLK_DBB_UPHY0 429
+#define TEGRA264_CLK_UPHY0_UXL_CORE 430
+#define TEGRA264_CLK_ISC_CPU_ROOT 431
+#define TEGRA264_CLK_ISC_NIC 432
+#define TEGRA264_CLK_CTC_TXCLK0_M 433
+#define TEGRA264_CLK_CTC_TXCLK1_M 434
+#define TEGRA264_CLK_CTC_RXCLK0_M 435
+#define TEGRA264_CLK_CTC_RXCLK1_M 436
+#define TEGRA264_CLK_PLLREFGP_OUT 437
+#define TEGRA264_CLK_PLLREFGP_OUT1 438
+#define TEGRA264_CLK_GPU_SYS 439
+#define TEGRA264_CLK_GPU_NVD 440
+#define TEGRA264_CLK_GPU_UPROC 441
+#define TEGRA264_CLK_GPU_GPC0 442
+#define TEGRA264_CLK_GPU_GPC1 443
+#define TEGRA264_CLK_GPU_GPC2 444
+#define TEGRA264_CLK_PLLX 445
+#define TEGRA264_CLK_APE_SOUNDWIRE_MSRC0 446
+#define TEGRA264_CLK_APE_SOUNDWIRE_DATA_EN_SHAPER 447
+#define TEGRA264_CLK_AO_SOUNDWIRE_MSRC0 448
+#define TEGRA264_CLK_AO_SOUNDWIRE_DATA_EN_SHAPER 449
+#define TEGRA264_CLK_MGBE0_TX_SER 459
+#define TEGRA264_CLK_MGBE1_TX_SER 460
+#define TEGRA264_CLK_MGBE2_TX_SER 461
+#define TEGRA264_CLK_MGBE3_TX_SER 462
+#define TEGRA264_CLK_MGBE0_RX_SER 463
+#define TEGRA264_CLK_MGBE1_RX_SER 464
+#define TEGRA264_CLK_MGBE2_RX_SER 465
+#define TEGRA264_CLK_MGBE3_RX_SER 466
+#define TEGRA264_CLK_DPAUX 467
+
+#endif /* DT_BINDINGS_CLOCK_NVIDIA_TEGRA264_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX94_H
+#define __DT_BINDINGS_CLOCK_IMX94_H
+
+#define IMX94_CLK_DISPMIX_CLK_SEL 0
+
+#define IMX94_CLK_DISPMIX_LVDS_CLK_GATE 0
+
+#endif /* __DT_BINDINGS_CLOCK_IMX94_H */
#define GCC_UFS_MEM_CLKREF_EN 239
#define GCC_UFS_CARD_CLKREF_EN 240
#define GPLL9 241
+#define GCC_CAMERA_AHB_CLK 242
+#define GCC_CAMERA_XO_CLK 243
+#define GCC_CPUSS_DVM_BUS_CLK 244
+#define GCC_CPUSS_GNOC_CLK 245
+#define GCC_DISP_AHB_CLK 246
+#define GCC_DISP_XO_CLK 247
+#define GCC_GPU_CFG_AHB_CLK 248
+#define GCC_NPU_CFG_AHB_CLK 249
+#define GCC_VIDEO_AHB_CLK 250
+#define GCC_VIDEO_XO_CLK 251
#define GCC_EMAC_BCR 0
#define GCC_GPU_BCR 1
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_IPQ5018_CMN_PLL_H
+#define _DT_BINDINGS_CLK_QCOM_IPQ5018_CMN_PLL_H
+
+/* CMN PLL core clock. */
+#define IPQ5018_CMN_PLL_CLK 0
+
+/* The output clocks from CMN PLL of IPQ5018. */
+#define IPQ5018_XO_24MHZ_CLK 1
+#define IPQ5018_SLEEP_32KHZ_CLK 2
+#define IPQ5018_ETH_50MHZ_CLK 3
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_IPQ5424_CMN_PLL_H
+#define _DT_BINDINGS_CLK_QCOM_IPQ5424_CMN_PLL_H
+
+/* CMN PLL core clock. */
+#define IPQ5424_CMN_PLL_CLK 0
+
+/* The output clocks from CMN PLL of IPQ5424. */
+#define IPQ5424_XO_24MHZ_CLK 1
+#define IPQ5424_SLEEP_32KHZ_CLK 2
+#define IPQ5424_PCS_31P25MHZ_CLK 3
+#define IPQ5424_NSS_300MHZ_CLK 4
+#define IPQ5424_PPE_375MHZ_CLK 5
+#define IPQ5424_ETH0_50MHZ_CLK 6
+#define IPQ5424_ETH1_50MHZ_CLK 7
+#define IPQ5424_ETH2_50MHZ_CLK 8
+#define IPQ5424_ETH_25MHZ_CLK 9
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_MILOS_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_MILOS_H
+
+/* CAM_CC clocks */
+#define CAM_CC_PLL0 0
+#define CAM_CC_PLL0_OUT_EVEN 1
+#define CAM_CC_PLL0_OUT_ODD 2
+#define CAM_CC_PLL1 3
+#define CAM_CC_PLL1_OUT_EVEN 4
+#define CAM_CC_PLL2 5
+#define CAM_CC_PLL2_OUT_EVEN 6
+#define CAM_CC_PLL3 7
+#define CAM_CC_PLL3_OUT_EVEN 8
+#define CAM_CC_PLL4 9
+#define CAM_CC_PLL4_OUT_EVEN 10
+#define CAM_CC_PLL5 11
+#define CAM_CC_PLL5_OUT_EVEN 12
+#define CAM_CC_PLL6 13
+#define CAM_CC_PLL6_OUT_EVEN 14
+#define CAM_CC_BPS_AHB_CLK 15
+#define CAM_CC_BPS_AREG_CLK 16
+#define CAM_CC_BPS_CLK 17
+#define CAM_CC_BPS_CLK_SRC 18
+#define CAM_CC_CAMNOC_ATB_CLK 19
+#define CAM_CC_CAMNOC_AXI_CLK_SRC 20
+#define CAM_CC_CAMNOC_AXI_HF_CLK 21
+#define CAM_CC_CAMNOC_AXI_SF_CLK 22
+#define CAM_CC_CAMNOC_NRT_AXI_CLK 23
+#define CAM_CC_CAMNOC_RT_AXI_CLK 24
+#define CAM_CC_CCI_0_CLK 25
+#define CAM_CC_CCI_0_CLK_SRC 26
+#define CAM_CC_CCI_1_CLK 27
+#define CAM_CC_CCI_1_CLK_SRC 28
+#define CAM_CC_CORE_AHB_CLK 29
+#define CAM_CC_CPAS_AHB_CLK 30
+#define CAM_CC_CPHY_RX_CLK_SRC 31
+#define CAM_CC_CRE_AHB_CLK 32
+#define CAM_CC_CRE_CLK 33
+#define CAM_CC_CRE_CLK_SRC 34
+#define CAM_CC_CSI0PHYTIMER_CLK 35
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 36
+#define CAM_CC_CSI1PHYTIMER_CLK 37
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 38
+#define CAM_CC_CSI2PHYTIMER_CLK 39
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 40
+#define CAM_CC_CSI3PHYTIMER_CLK 41
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC 42
+#define CAM_CC_CSIPHY0_CLK 43
+#define CAM_CC_CSIPHY1_CLK 44
+#define CAM_CC_CSIPHY2_CLK 45
+#define CAM_CC_CSIPHY3_CLK 46
+#define CAM_CC_FAST_AHB_CLK_SRC 47
+#define CAM_CC_GDSC_CLK 48
+#define CAM_CC_ICP_ATB_CLK 49
+#define CAM_CC_ICP_CLK 50
+#define CAM_CC_ICP_CLK_SRC 51
+#define CAM_CC_ICP_CTI_CLK 52
+#define CAM_CC_ICP_TS_CLK 53
+#define CAM_CC_MCLK0_CLK 54
+#define CAM_CC_MCLK0_CLK_SRC 55
+#define CAM_CC_MCLK1_CLK 56
+#define CAM_CC_MCLK1_CLK_SRC 57
+#define CAM_CC_MCLK2_CLK 58
+#define CAM_CC_MCLK2_CLK_SRC 59
+#define CAM_CC_MCLK3_CLK 60
+#define CAM_CC_MCLK3_CLK_SRC 61
+#define CAM_CC_MCLK4_CLK 62
+#define CAM_CC_MCLK4_CLK_SRC 63
+#define CAM_CC_OPE_0_AHB_CLK 64
+#define CAM_CC_OPE_0_AREG_CLK 65
+#define CAM_CC_OPE_0_CLK 66
+#define CAM_CC_OPE_0_CLK_SRC 67
+#define CAM_CC_SLEEP_CLK 68
+#define CAM_CC_SLEEP_CLK_SRC 69
+#define CAM_CC_SLOW_AHB_CLK_SRC 70
+#define CAM_CC_SOC_AHB_CLK 71
+#define CAM_CC_SYS_TMR_CLK 72
+#define CAM_CC_TFE_0_AHB_CLK 73
+#define CAM_CC_TFE_0_CLK 74
+#define CAM_CC_TFE_0_CLK_SRC 75
+#define CAM_CC_TFE_0_CPHY_RX_CLK 76
+#define CAM_CC_TFE_0_CSID_CLK 77
+#define CAM_CC_TFE_0_CSID_CLK_SRC 78
+#define CAM_CC_TFE_1_AHB_CLK 79
+#define CAM_CC_TFE_1_CLK 80
+#define CAM_CC_TFE_1_CLK_SRC 81
+#define CAM_CC_TFE_1_CPHY_RX_CLK 82
+#define CAM_CC_TFE_1_CSID_CLK 83
+#define CAM_CC_TFE_1_CSID_CLK_SRC 84
+#define CAM_CC_TFE_2_AHB_CLK 85
+#define CAM_CC_TFE_2_CLK 86
+#define CAM_CC_TFE_2_CLK_SRC 87
+#define CAM_CC_TFE_2_CPHY_RX_CLK 88
+#define CAM_CC_TFE_2_CSID_CLK 89
+#define CAM_CC_TFE_2_CSID_CLK_SRC 90
+#define CAM_CC_TOP_SHIFT_CLK 91
+#define CAM_CC_XO_CLK_SRC 92
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_CAMNOC_BCR 1
+#define CAM_CC_CAMSS_TOP_BCR 2
+#define CAM_CC_CCI_0_BCR 3
+#define CAM_CC_CCI_1_BCR 4
+#define CAM_CC_CPAS_BCR 5
+#define CAM_CC_CRE_BCR 6
+#define CAM_CC_CSI0PHY_BCR 7
+#define CAM_CC_CSI1PHY_BCR 8
+#define CAM_CC_CSI2PHY_BCR 9
+#define CAM_CC_CSI3PHY_BCR 10
+#define CAM_CC_ICP_BCR 11
+#define CAM_CC_MCLK0_BCR 12
+#define CAM_CC_MCLK1_BCR 13
+#define CAM_CC_MCLK2_BCR 14
+#define CAM_CC_MCLK3_BCR 15
+#define CAM_CC_MCLK4_BCR 16
+#define CAM_CC_OPE_0_BCR 17
+#define CAM_CC_TFE_0_BCR 18
+#define CAM_CC_TFE_1_BCR 19
+#define CAM_CC_TFE_2_BCR 20
+
+/* CAM_CC power domains */
+#define CAM_CC_CAMSS_TOP_GDSC 0
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_MILOS_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_MILOS_H
+
+/* DISP_CC clocks */
+#define DISP_CC_PLL0 0
+#define DISP_CC_MDSS_ACCU_CLK 1
+#define DISP_CC_MDSS_AHB1_CLK 2
+#define DISP_CC_MDSS_AHB_CLK 3
+#define DISP_CC_MDSS_AHB_CLK_SRC 4
+#define DISP_CC_MDSS_BYTE0_CLK 5
+#define DISP_CC_MDSS_BYTE0_CLK_SRC 6
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 7
+#define DISP_CC_MDSS_BYTE0_INTF_CLK 8
+#define DISP_CC_MDSS_DPTX0_AUX_CLK 9
+#define DISP_CC_MDSS_DPTX0_AUX_CLK_SRC 10
+#define DISP_CC_MDSS_DPTX0_CRYPTO_CLK 11
+#define DISP_CC_MDSS_DPTX0_LINK_CLK 12
+#define DISP_CC_MDSS_DPTX0_LINK_CLK_SRC 13
+#define DISP_CC_MDSS_DPTX0_LINK_DIV_CLK_SRC 14
+#define DISP_CC_MDSS_DPTX0_LINK_INTF_CLK 15
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK 16
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC 17
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK 18
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC 19
+#define DISP_CC_MDSS_DPTX0_USB_ROUTER_LINK_INTF_CLK 20
+#define DISP_CC_MDSS_ESC0_CLK 21
+#define DISP_CC_MDSS_ESC0_CLK_SRC 22
+#define DISP_CC_MDSS_MDP1_CLK 23
+#define DISP_CC_MDSS_MDP_CLK 24
+#define DISP_CC_MDSS_MDP_CLK_SRC 25
+#define DISP_CC_MDSS_MDP_LUT1_CLK 26
+#define DISP_CC_MDSS_MDP_LUT_CLK 27
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 28
+#define DISP_CC_MDSS_PCLK0_CLK 29
+#define DISP_CC_MDSS_PCLK0_CLK_SRC 30
+#define DISP_CC_MDSS_RSCC_AHB_CLK 31
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK 32
+#define DISP_CC_MDSS_VSYNC1_CLK 33
+#define DISP_CC_MDSS_VSYNC_CLK 34
+#define DISP_CC_MDSS_VSYNC_CLK_SRC 35
+#define DISP_CC_SLEEP_CLK 36
+#define DISP_CC_SLEEP_CLK_SRC 37
+#define DISP_CC_XO_CLK 38
+#define DISP_CC_XO_CLK_SRC 39
+
+/* DISP_CC resets */
+#define DISP_CC_MDSS_CORE_BCR 0
+#define DISP_CC_MDSS_CORE_INT2_BCR 1
+#define DISP_CC_MDSS_RSCC_BCR 2
+
+/* DISP_CC power domains */
+#define DISP_CC_MDSS_CORE_GDSC 0
+#define DISP_CC_MDSS_CORE_INT2_GDSC 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_MILOS_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_MILOS_H
+
+/* GCC clocks */
+#define GCC_GPLL0 0
+#define GCC_GPLL0_OUT_EVEN 1
+#define GCC_GPLL2 2
+#define GCC_GPLL4 3
+#define GCC_GPLL6 4
+#define GCC_GPLL7 5
+#define GCC_GPLL9 6
+#define GCC_AGGRE_NOC_PCIE_AXI_CLK 7
+#define GCC_AGGRE_UFS_PHY_AXI_CLK 8
+#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 9
+#define GCC_AGGRE_USB3_PRIM_AXI_CLK 10
+#define GCC_BOOT_ROM_AHB_CLK 11
+#define GCC_CAMERA_AHB_CLK 12
+#define GCC_CAMERA_HF_AXI_CLK 13
+#define GCC_CAMERA_HF_XO_CLK 14
+#define GCC_CAMERA_SF_AXI_CLK 15
+#define GCC_CAMERA_SF_XO_CLK 16
+#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK 17
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 18
+#define GCC_CNOC_PCIE_SF_AXI_CLK 19
+#define GCC_DDRSS_GPU_AXI_CLK 20
+#define GCC_DDRSS_PCIE_SF_QTB_CLK 21
+#define GCC_DISP_AHB_CLK 22
+#define GCC_DISP_GPLL0_DIV_CLK_SRC 23
+#define GCC_DISP_HF_AXI_CLK 24
+#define GCC_DISP_XO_CLK 25
+#define GCC_GP1_CLK 26
+#define GCC_GP1_CLK_SRC 27
+#define GCC_GP2_CLK 28
+#define GCC_GP2_CLK_SRC 29
+#define GCC_GP3_CLK 30
+#define GCC_GP3_CLK_SRC 31
+#define GCC_GPU_CFG_AHB_CLK 32
+#define GCC_GPU_GPLL0_CLK_SRC 33
+#define GCC_GPU_GPLL0_DIV_CLK_SRC 34
+#define GCC_GPU_MEMNOC_GFX_CLK 35
+#define GCC_GPU_SNOC_DVM_GFX_CLK 36
+#define GCC_PCIE_0_AUX_CLK 37
+#define GCC_PCIE_0_AUX_CLK_SRC 38
+#define GCC_PCIE_0_CFG_AHB_CLK 39
+#define GCC_PCIE_0_MSTR_AXI_CLK 40
+#define GCC_PCIE_0_PHY_RCHNG_CLK 41
+#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 42
+#define GCC_PCIE_0_PIPE_CLK 43
+#define GCC_PCIE_0_PIPE_CLK_SRC 44
+#define GCC_PCIE_0_PIPE_DIV2_CLK 45
+#define GCC_PCIE_0_PIPE_DIV2_CLK_SRC 46
+#define GCC_PCIE_0_SLV_AXI_CLK 47
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 48
+#define GCC_PCIE_1_AUX_CLK 49
+#define GCC_PCIE_1_AUX_CLK_SRC 50
+#define GCC_PCIE_1_CFG_AHB_CLK 51
+#define GCC_PCIE_1_MSTR_AXI_CLK 52
+#define GCC_PCIE_1_PHY_RCHNG_CLK 53
+#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 54
+#define GCC_PCIE_1_PIPE_CLK 55
+#define GCC_PCIE_1_PIPE_CLK_SRC 56
+#define GCC_PCIE_1_PIPE_DIV2_CLK 57
+#define GCC_PCIE_1_PIPE_DIV2_CLK_SRC 58
+#define GCC_PCIE_1_SLV_AXI_CLK 59
+#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 60
+#define GCC_PCIE_RSCC_CFG_AHB_CLK 61
+#define GCC_PCIE_RSCC_XO_CLK 62
+#define GCC_PDM2_CLK 63
+#define GCC_PDM2_CLK_SRC 64
+#define GCC_PDM_AHB_CLK 65
+#define GCC_PDM_XO4_CLK 66
+#define GCC_QMIP_CAMERA_NRT_AHB_CLK 67
+#define GCC_QMIP_CAMERA_RT_AHB_CLK 68
+#define GCC_QMIP_DISP_AHB_CLK 69
+#define GCC_QMIP_GPU_AHB_CLK 70
+#define GCC_QMIP_PCIE_AHB_CLK 71
+#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK 72
+#define GCC_QMIP_VIDEO_CVP_AHB_CLK 73
+#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK 74
+#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 75
+#define GCC_QUPV3_WRAP0_CORE_2X_CLK 76
+#define GCC_QUPV3_WRAP0_CORE_CLK 77
+#define GCC_QUPV3_WRAP0_QSPI_REF_CLK 78
+#define GCC_QUPV3_WRAP0_QSPI_REF_CLK_SRC 79
+#define GCC_QUPV3_WRAP0_S0_CLK 80
+#define GCC_QUPV3_WRAP0_S0_CLK_SRC 81
+#define GCC_QUPV3_WRAP0_S1_CLK 82
+#define GCC_QUPV3_WRAP0_S1_CLK_SRC 83
+#define GCC_QUPV3_WRAP0_S2_CLK 84
+#define GCC_QUPV3_WRAP0_S2_CLK_SRC 85
+#define GCC_QUPV3_WRAP0_S3_CLK 86
+#define GCC_QUPV3_WRAP0_S3_CLK_SRC 87
+#define GCC_QUPV3_WRAP0_S4_CLK 88
+#define GCC_QUPV3_WRAP0_S4_CLK_SRC 89
+#define GCC_QUPV3_WRAP0_S5_CLK 90
+#define GCC_QUPV3_WRAP0_S5_CLK_SRC 91
+#define GCC_QUPV3_WRAP0_S6_CLK 92
+#define GCC_QUPV3_WRAP0_S6_CLK_SRC 93
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK 94
+#define GCC_QUPV3_WRAP1_CORE_CLK 95
+#define GCC_QUPV3_WRAP1_QSPI_REF_CLK 96
+#define GCC_QUPV3_WRAP1_QSPI_REF_CLK_SRC 97
+#define GCC_QUPV3_WRAP1_S0_CLK 98
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC 99
+#define GCC_QUPV3_WRAP1_S1_CLK 100
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC 101
+#define GCC_QUPV3_WRAP1_S2_CLK 102
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC 103
+#define GCC_QUPV3_WRAP1_S3_CLK 104
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC 105
+#define GCC_QUPV3_WRAP1_S4_CLK 106
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC 107
+#define GCC_QUPV3_WRAP1_S5_CLK 108
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC 109
+#define GCC_QUPV3_WRAP1_S6_CLK 110
+#define GCC_QUPV3_WRAP1_S6_CLK_SRC 111
+#define GCC_QUPV3_WRAP_0_M_AHB_CLK 112
+#define GCC_QUPV3_WRAP_0_S_AHB_CLK 113
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK 114
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK 115
+#define GCC_SDCC1_AHB_CLK 116
+#define GCC_SDCC1_APPS_CLK 117
+#define GCC_SDCC1_APPS_CLK_SRC 118
+#define GCC_SDCC1_ICE_CORE_CLK 119
+#define GCC_SDCC1_ICE_CORE_CLK_SRC 120
+#define GCC_SDCC2_AHB_CLK 121
+#define GCC_SDCC2_APPS_CLK 122
+#define GCC_SDCC2_APPS_CLK_SRC 123
+#define GCC_UFS_PHY_AHB_CLK 124
+#define GCC_UFS_PHY_AXI_CLK 125
+#define GCC_UFS_PHY_AXI_CLK_SRC 126
+#define GCC_UFS_PHY_AXI_HW_CTL_CLK 127
+#define GCC_UFS_PHY_ICE_CORE_CLK 128
+#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 129
+#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 130
+#define GCC_UFS_PHY_PHY_AUX_CLK 131
+#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 132
+#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 133
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 134
+#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 135
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 136
+#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 137
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 138
+#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 139
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK 140
+#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 141
+#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 142
+#define GCC_USB30_PRIM_ATB_CLK 143
+#define GCC_USB30_PRIM_MASTER_CLK 144
+#define GCC_USB30_PRIM_MASTER_CLK_SRC 145
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK 146
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 147
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 148
+#define GCC_USB30_PRIM_SLEEP_CLK 149
+#define GCC_USB3_PRIM_PHY_AUX_CLK 150
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 151
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 152
+#define GCC_USB3_PRIM_PHY_PIPE_CLK 153
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 154
+#define GCC_VIDEO_AHB_CLK 155
+#define GCC_VIDEO_AXI0_CLK 156
+#define GCC_VIDEO_XO_CLK 157
+
+/* GCC resets */
+#define GCC_CAMERA_BCR 0
+#define GCC_DISPLAY_BCR 1
+#define GCC_GPU_BCR 2
+#define GCC_PCIE_0_BCR 3
+#define GCC_PCIE_0_LINK_DOWN_BCR 4
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 5
+#define GCC_PCIE_0_PHY_BCR 6
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 7
+#define GCC_PCIE_1_BCR 8
+#define GCC_PCIE_1_LINK_DOWN_BCR 9
+#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 10
+#define GCC_PCIE_1_PHY_BCR 11
+#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 12
+#define GCC_PCIE_RSCC_BCR 13
+#define GCC_PDM_BCR 14
+#define GCC_QUPV3_WRAPPER_0_BCR 15
+#define GCC_QUPV3_WRAPPER_1_BCR 16
+#define GCC_QUSB2PHY_PRIM_BCR 17
+#define GCC_QUSB2PHY_SEC_BCR 18
+#define GCC_SDCC1_BCR 19
+#define GCC_SDCC2_BCR 20
+#define GCC_UFS_PHY_BCR 21
+#define GCC_USB30_PRIM_BCR 22
+#define GCC_USB3_DP_PHY_PRIM_BCR 23
+#define GCC_USB3_PHY_PRIM_BCR 24
+#define GCC_USB3PHY_PHY_PRIM_BCR 25
+#define GCC_VIDEO_AXI0_CLK_ARES 26
+#define GCC_VIDEO_BCR 27
+
+/* GCC power domains */
+#define PCIE_0_GDSC 0
+#define PCIE_0_PHY_GDSC 1
+#define PCIE_1_GDSC 2
+#define PCIE_1_PHY_GDSC 3
+#define UFS_PHY_GDSC 4
+#define UFS_MEM_PHY_GDSC 5
+#define USB30_PRIM_GDSC 6
+#define USB3_PHY_GDSC 7
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_MILOS_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_MILOS_H
+
+/* GPU_CC clocks */
+#define GPU_CC_PLL0 0
+#define GPU_CC_PLL0_OUT_EVEN 1
+#define GPU_CC_AHB_CLK 2
+#define GPU_CC_CB_CLK 3
+#define GPU_CC_CX_ACCU_SHIFT_CLK 4
+#define GPU_CC_CX_FF_CLK 5
+#define GPU_CC_CX_GMU_CLK 6
+#define GPU_CC_CXO_AON_CLK 7
+#define GPU_CC_CXO_CLK 8
+#define GPU_CC_DEMET_CLK 9
+#define GPU_CC_DEMET_DIV_CLK_SRC 10
+#define GPU_CC_DPM_CLK 11
+#define GPU_CC_FF_CLK_SRC 12
+#define GPU_CC_FREQ_MEASURE_CLK 13
+#define GPU_CC_GMU_CLK_SRC 14
+#define GPU_CC_GX_ACCU_SHIFT_CLK 15
+#define GPU_CC_GX_ACD_AHB_FF_CLK 16
+#define GPU_CC_GX_AHB_FF_CLK 17
+#define GPU_CC_GX_GMU_CLK 18
+#define GPU_CC_GX_RCG_AHB_FF_CLK 19
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK 20
+#define GPU_CC_HUB_AON_CLK 21
+#define GPU_CC_HUB_CLK_SRC 22
+#define GPU_CC_HUB_CX_INT_CLK 23
+#define GPU_CC_HUB_DIV_CLK_SRC 24
+#define GPU_CC_MEMNOC_GFX_CLK 25
+#define GPU_CC_RSCC_HUB_AON_CLK 26
+#define GPU_CC_RSCC_XO_AON_CLK 27
+#define GPU_CC_SLEEP_CLK 28
+#define GPU_CC_XO_CLK_SRC 29
+#define GPU_CC_XO_DIV_CLK_SRC 30
+
+/* GPU_CC resets */
+#define GPU_CC_CB_BCR 0
+#define GPU_CC_CX_BCR 1
+#define GPU_CC_FAST_HUB_BCR 2
+#define GPU_CC_FF_BCR 3
+#define GPU_CC_GMU_BCR 4
+#define GPU_CC_GX_BCR 5
+#define GPU_CC_RBCPR_BCR 6
+#define GPU_CC_XO_BCR 7
+
+/* GPU_CC power domains */
+#define GPU_CC_CX_GDSC 0
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_MILOS_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_MILOS_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_PLL0 0
+#define VIDEO_CC_AHB_CLK 1
+#define VIDEO_CC_AHB_CLK_SRC 2
+#define VIDEO_CC_MVS0_CLK 3
+#define VIDEO_CC_MVS0_CLK_SRC 4
+#define VIDEO_CC_MVS0_DIV_CLK_SRC 5
+#define VIDEO_CC_MVS0_SHIFT_CLK 6
+#define VIDEO_CC_MVS0C_CLK 7
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC 8
+#define VIDEO_CC_MVS0C_SHIFT_CLK 9
+#define VIDEO_CC_SLEEP_CLK 10
+#define VIDEO_CC_SLEEP_CLK_SRC 11
+#define VIDEO_CC_XO_CLK 12
+#define VIDEO_CC_XO_CLK_SRC 13
+
+/* VIDEO_CC resets */
+#define VIDEO_CC_INTERFACE_BCR 0
+#define VIDEO_CC_MVS0_BCR 1
+#define VIDEO_CC_MVS0C_CLK_ARES 2
+#define VIDEO_CC_MVS0C_BCR 3
+
+/* VIDEO_CC power domains */
+#define VIDEO_CC_MVS0_GDSC 0
+#define VIDEO_CC_MVS0C_GDSC 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_QCS615_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_QCS615_H
+
+/* CAM_CC clocks */
+#define CAM_CC_BPS_AHB_CLK 0
+#define CAM_CC_BPS_AREG_CLK 1
+#define CAM_CC_BPS_AXI_CLK 2
+#define CAM_CC_BPS_CLK 3
+#define CAM_CC_BPS_CLK_SRC 4
+#define CAM_CC_CAMNOC_ATB_CLK 5
+#define CAM_CC_CAMNOC_AXI_CLK 6
+#define CAM_CC_CCI_CLK 7
+#define CAM_CC_CCI_CLK_SRC 8
+#define CAM_CC_CORE_AHB_CLK 9
+#define CAM_CC_CPAS_AHB_CLK 10
+#define CAM_CC_CPHY_RX_CLK_SRC 11
+#define CAM_CC_CSI0PHYTIMER_CLK 12
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 13
+#define CAM_CC_CSI1PHYTIMER_CLK 14
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 15
+#define CAM_CC_CSI2PHYTIMER_CLK 16
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 17
+#define CAM_CC_CSIPHY0_CLK 18
+#define CAM_CC_CSIPHY1_CLK 19
+#define CAM_CC_CSIPHY2_CLK 20
+#define CAM_CC_FAST_AHB_CLK_SRC 21
+#define CAM_CC_ICP_ATB_CLK 22
+#define CAM_CC_ICP_CLK 23
+#define CAM_CC_ICP_CLK_SRC 24
+#define CAM_CC_ICP_CTI_CLK 25
+#define CAM_CC_ICP_TS_CLK 26
+#define CAM_CC_IFE_0_AXI_CLK 27
+#define CAM_CC_IFE_0_CLK 28
+#define CAM_CC_IFE_0_CLK_SRC 29
+#define CAM_CC_IFE_0_CPHY_RX_CLK 30
+#define CAM_CC_IFE_0_CSID_CLK 31
+#define CAM_CC_IFE_0_CSID_CLK_SRC 32
+#define CAM_CC_IFE_0_DSP_CLK 33
+#define CAM_CC_IFE_1_AXI_CLK 34
+#define CAM_CC_IFE_1_CLK 35
+#define CAM_CC_IFE_1_CLK_SRC 36
+#define CAM_CC_IFE_1_CPHY_RX_CLK 37
+#define CAM_CC_IFE_1_CSID_CLK 38
+#define CAM_CC_IFE_1_CSID_CLK_SRC 39
+#define CAM_CC_IFE_1_DSP_CLK 40
+#define CAM_CC_IFE_LITE_CLK 41
+#define CAM_CC_IFE_LITE_CLK_SRC 42
+#define CAM_CC_IFE_LITE_CPHY_RX_CLK 43
+#define CAM_CC_IFE_LITE_CSID_CLK 44
+#define CAM_CC_IFE_LITE_CSID_CLK_SRC 45
+#define CAM_CC_IPE_0_AHB_CLK 46
+#define CAM_CC_IPE_0_AREG_CLK 47
+#define CAM_CC_IPE_0_AXI_CLK 48
+#define CAM_CC_IPE_0_CLK 49
+#define CAM_CC_IPE_0_CLK_SRC 50
+#define CAM_CC_JPEG_CLK 51
+#define CAM_CC_JPEG_CLK_SRC 52
+#define CAM_CC_LRME_CLK 53
+#define CAM_CC_LRME_CLK_SRC 54
+#define CAM_CC_MCLK0_CLK 55
+#define CAM_CC_MCLK0_CLK_SRC 56
+#define CAM_CC_MCLK1_CLK 57
+#define CAM_CC_MCLK1_CLK_SRC 58
+#define CAM_CC_MCLK2_CLK 59
+#define CAM_CC_MCLK2_CLK_SRC 60
+#define CAM_CC_MCLK3_CLK 61
+#define CAM_CC_MCLK3_CLK_SRC 62
+#define CAM_CC_PLL0 63
+#define CAM_CC_PLL1 64
+#define CAM_CC_PLL2 65
+#define CAM_CC_PLL2_OUT_AUX2 66
+#define CAM_CC_PLL3 67
+#define CAM_CC_SLOW_AHB_CLK_SRC 68
+#define CAM_CC_SOC_AHB_CLK 69
+#define CAM_CC_SYS_TMR_CLK 70
+
+/* CAM_CC power domains */
+#define BPS_GDSC 0
+#define IFE_0_GDSC 1
+#define IFE_1_GDSC 2
+#define IPE_0_GDSC 3
+#define TITAN_TOP_GDSC 4
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_CAMNOC_BCR 1
+#define CAM_CC_CCI_BCR 2
+#define CAM_CC_CPAS_BCR 3
+#define CAM_CC_CSI0PHY_BCR 4
+#define CAM_CC_CSI1PHY_BCR 5
+#define CAM_CC_CSI2PHY_BCR 6
+#define CAM_CC_ICP_BCR 7
+#define CAM_CC_IFE_0_BCR 8
+#define CAM_CC_IFE_1_BCR 9
+#define CAM_CC_IFE_LITE_BCR 10
+#define CAM_CC_IPE_0_BCR 11
+#define CAM_CC_JPEG_BCR 12
+#define CAM_CC_LRME_BCR 13
+#define CAM_CC_MCLK0_BCR 14
+#define CAM_CC_MCLK1_BCR 15
+#define CAM_CC_MCLK2_BCR 16
+#define CAM_CC_MCLK3_BCR 17
+#define CAM_CC_TITAN_TOP_BCR 18
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_QCS615_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_QCS615_H
+
+/* DISP_CC clocks */
+#define DISP_CC_MDSS_AHB_CLK 0
+#define DISP_CC_MDSS_AHB_CLK_SRC 1
+#define DISP_CC_MDSS_BYTE0_CLK 2
+#define DISP_CC_MDSS_BYTE0_CLK_SRC 3
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 4
+#define DISP_CC_MDSS_BYTE0_INTF_CLK 5
+#define DISP_CC_MDSS_DP_AUX_CLK 6
+#define DISP_CC_MDSS_DP_AUX_CLK_SRC 7
+#define DISP_CC_MDSS_DP_CRYPTO_CLK 8
+#define DISP_CC_MDSS_DP_CRYPTO_CLK_SRC 9
+#define DISP_CC_MDSS_DP_LINK_CLK 10
+#define DISP_CC_MDSS_DP_LINK_CLK_SRC 11
+#define DISP_CC_MDSS_DP_LINK_DIV_CLK_SRC 12
+#define DISP_CC_MDSS_DP_LINK_INTF_CLK 13
+#define DISP_CC_MDSS_DP_PIXEL1_CLK 14
+#define DISP_CC_MDSS_DP_PIXEL1_CLK_SRC 15
+#define DISP_CC_MDSS_DP_PIXEL_CLK 16
+#define DISP_CC_MDSS_DP_PIXEL_CLK_SRC 17
+#define DISP_CC_MDSS_ESC0_CLK 18
+#define DISP_CC_MDSS_ESC0_CLK_SRC 19
+#define DISP_CC_MDSS_MDP_CLK 20
+#define DISP_CC_MDSS_MDP_CLK_SRC 21
+#define DISP_CC_MDSS_MDP_LUT_CLK 22
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 23
+#define DISP_CC_MDSS_PCLK0_CLK 24
+#define DISP_CC_MDSS_PCLK0_CLK_SRC 25
+#define DISP_CC_MDSS_ROT_CLK 26
+#define DISP_CC_MDSS_ROT_CLK_SRC 27
+#define DISP_CC_MDSS_RSCC_AHB_CLK 28
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK 29
+#define DISP_CC_MDSS_VSYNC_CLK 30
+#define DISP_CC_MDSS_VSYNC_CLK_SRC 31
+#define DISP_CC_PLL0 32
+#define DISP_CC_XO_CLK 33
+
+/* DISP_CC power domains */
+#define MDSS_CORE_GDSC 0
+
+/* DISP_CC resets */
+#define DISP_CC_MDSS_CORE_BCR 0
+#define DISP_CC_MDSS_RSCC_BCR 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_QCS615_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_QCS615_H
+
+/* GPU_CC clocks */
+#define CRC_DIV_PLL0 0
+#define CRC_DIV_PLL1 1
+#define GPU_CC_PLL0 2
+#define GPU_CC_PLL1 3
+#define GPU_CC_CRC_AHB_CLK 4
+#define GPU_CC_CX_GFX3D_CLK 5
+#define GPU_CC_CX_GFX3D_SLV_CLK 6
+#define GPU_CC_CX_GMU_CLK 7
+#define GPU_CC_CX_SNOC_DVM_CLK 8
+#define GPU_CC_CXO_AON_CLK 9
+#define GPU_CC_CXO_CLK 10
+#define GPU_CC_GMU_CLK_SRC 11
+#define GPU_CC_GX_GFX3D_CLK 12
+#define GPU_CC_GX_GFX3D_CLK_SRC 13
+#define GPU_CC_GX_GMU_CLK 14
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK 15
+#define GPU_CC_SLEEP_CLK 16
+
+/* GPU_CC power domains */
+#define CX_GDSC 0
+#define GX_GDSC 1
+
+/* GPU_CC resets */
+#define GPU_CC_CX_BCR 0
+#define GPU_CC_GFX3D_AON_BCR 1
+#define GPU_CC_GMU_BCR 2
+#define GPU_CC_GX_BCR 3
+#define GPU_CC_XO_BCR 4
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_QCS615_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_QCS615_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_SLEEP_CLK 0
+#define VIDEO_CC_SLEEP_CLK_SRC 1
+#define VIDEO_CC_VCODEC0_AXI_CLK 2
+#define VIDEO_CC_VCODEC0_CORE_CLK 3
+#define VIDEO_CC_VENUS_AHB_CLK 4
+#define VIDEO_CC_VENUS_CLK_SRC 5
+#define VIDEO_CC_VENUS_CTL_AXI_CLK 6
+#define VIDEO_CC_VENUS_CTL_CORE_CLK 7
+#define VIDEO_CC_XO_CLK 8
+#define VIDEO_PLL0 9
+
+/* VIDEO_CC power domains */
+#define VCODEC0_GDSC 0
+#define VENUS_GDSC 1
+
+/* VIDEO_CC resets */
+#define VIDEO_CC_INTERFACE_BCR 0
+#define VIDEO_CC_VCODEC0_BCR 1
+#define VIDEO_CC_VENUS_BCR 2
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SC8180X_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SC8180X_H
+
+/* CAM_CC clocks */
+#define CAM_CC_BPS_AHB_CLK 0
+#define CAM_CC_BPS_AREG_CLK 1
+#define CAM_CC_BPS_AXI_CLK 2
+#define CAM_CC_BPS_CLK 3
+#define CAM_CC_BPS_CLK_SRC 4
+#define CAM_CC_CAMNOC_AXI_CLK 5
+#define CAM_CC_CAMNOC_AXI_CLK_SRC 6
+#define CAM_CC_CAMNOC_DCD_XO_CLK 7
+#define CAM_CC_CCI_0_CLK 8
+#define CAM_CC_CCI_0_CLK_SRC 9
+#define CAM_CC_CCI_1_CLK 10
+#define CAM_CC_CCI_1_CLK_SRC 11
+#define CAM_CC_CCI_2_CLK 12
+#define CAM_CC_CCI_2_CLK_SRC 13
+#define CAM_CC_CCI_3_CLK 14
+#define CAM_CC_CCI_3_CLK_SRC 15
+#define CAM_CC_CORE_AHB_CLK 16
+#define CAM_CC_CPAS_AHB_CLK 17
+#define CAM_CC_CPHY_RX_CLK_SRC 18
+#define CAM_CC_CSI0PHYTIMER_CLK 19
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 20
+#define CAM_CC_CSI1PHYTIMER_CLK 21
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 22
+#define CAM_CC_CSI2PHYTIMER_CLK 23
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 24
+#define CAM_CC_CSI3PHYTIMER_CLK 25
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC 26
+#define CAM_CC_CSIPHY0_CLK 27
+#define CAM_CC_CSIPHY1_CLK 28
+#define CAM_CC_CSIPHY2_CLK 29
+#define CAM_CC_CSIPHY3_CLK 30
+#define CAM_CC_FAST_AHB_CLK_SRC 31
+#define CAM_CC_FD_CORE_CLK 32
+#define CAM_CC_FD_CORE_CLK_SRC 33
+#define CAM_CC_FD_CORE_UAR_CLK 34
+#define CAM_CC_ICP_AHB_CLK 35
+#define CAM_CC_ICP_CLK 36
+#define CAM_CC_ICP_CLK_SRC 37
+#define CAM_CC_IFE_0_AXI_CLK 38
+#define CAM_CC_IFE_0_CLK 39
+#define CAM_CC_IFE_0_CLK_SRC 40
+#define CAM_CC_IFE_0_CPHY_RX_CLK 41
+#define CAM_CC_IFE_0_CSID_CLK 42
+#define CAM_CC_IFE_0_CSID_CLK_SRC 43
+#define CAM_CC_IFE_0_DSP_CLK 44
+#define CAM_CC_IFE_1_AXI_CLK 45
+#define CAM_CC_IFE_1_CLK 46
+#define CAM_CC_IFE_1_CLK_SRC 47
+#define CAM_CC_IFE_1_CPHY_RX_CLK 48
+#define CAM_CC_IFE_1_CSID_CLK 49
+#define CAM_CC_IFE_1_CSID_CLK_SRC 50
+#define CAM_CC_IFE_1_DSP_CLK 51
+#define CAM_CC_IFE_2_AXI_CLK 52
+#define CAM_CC_IFE_2_CLK 53
+#define CAM_CC_IFE_2_CLK_SRC 54
+#define CAM_CC_IFE_2_CPHY_RX_CLK 55
+#define CAM_CC_IFE_2_CSID_CLK 56
+#define CAM_CC_IFE_2_CSID_CLK_SRC 57
+#define CAM_CC_IFE_2_DSP_CLK 58
+#define CAM_CC_IFE_3_AXI_CLK 59
+#define CAM_CC_IFE_3_CLK 60
+#define CAM_CC_IFE_3_CLK_SRC 61
+#define CAM_CC_IFE_3_CPHY_RX_CLK 62
+#define CAM_CC_IFE_3_CSID_CLK 63
+#define CAM_CC_IFE_3_CSID_CLK_SRC 64
+#define CAM_CC_IFE_3_DSP_CLK 65
+#define CAM_CC_IFE_LITE_0_CLK 66
+#define CAM_CC_IFE_LITE_0_CLK_SRC 67
+#define CAM_CC_IFE_LITE_0_CPHY_RX_CLK 68
+#define CAM_CC_IFE_LITE_0_CSID_CLK 69
+#define CAM_CC_IFE_LITE_0_CSID_CLK_SRC 70
+#define CAM_CC_IFE_LITE_1_CLK 71
+#define CAM_CC_IFE_LITE_1_CLK_SRC 72
+#define CAM_CC_IFE_LITE_1_CPHY_RX_CLK 73
+#define CAM_CC_IFE_LITE_1_CSID_CLK 74
+#define CAM_CC_IFE_LITE_1_CSID_CLK_SRC 75
+#define CAM_CC_IFE_LITE_2_CLK 76
+#define CAM_CC_IFE_LITE_2_CLK_SRC 77
+#define CAM_CC_IFE_LITE_2_CPHY_RX_CLK 78
+#define CAM_CC_IFE_LITE_2_CSID_CLK 79
+#define CAM_CC_IFE_LITE_2_CSID_CLK_SRC 80
+#define CAM_CC_IFE_LITE_3_CLK 81
+#define CAM_CC_IFE_LITE_3_CLK_SRC 82
+#define CAM_CC_IFE_LITE_3_CPHY_RX_CLK 83
+#define CAM_CC_IFE_LITE_3_CSID_CLK 84
+#define CAM_CC_IFE_LITE_3_CSID_CLK_SRC 85
+#define CAM_CC_IPE_0_AHB_CLK 86
+#define CAM_CC_IPE_0_AREG_CLK 87
+#define CAM_CC_IPE_0_AXI_CLK 88
+#define CAM_CC_IPE_0_CLK 89
+#define CAM_CC_IPE_0_CLK_SRC 90
+#define CAM_CC_IPE_1_AHB_CLK 91
+#define CAM_CC_IPE_1_AREG_CLK 92
+#define CAM_CC_IPE_1_AXI_CLK 93
+#define CAM_CC_IPE_1_CLK 94
+#define CAM_CC_JPEG_CLK 95
+#define CAM_CC_JPEG_CLK_SRC 96
+#define CAM_CC_LRME_CLK 97
+#define CAM_CC_LRME_CLK_SRC 98
+#define CAM_CC_MCLK0_CLK 99
+#define CAM_CC_MCLK0_CLK_SRC 100
+#define CAM_CC_MCLK1_CLK 101
+#define CAM_CC_MCLK1_CLK_SRC 102
+#define CAM_CC_MCLK2_CLK 103
+#define CAM_CC_MCLK2_CLK_SRC 104
+#define CAM_CC_MCLK3_CLK 105
+#define CAM_CC_MCLK3_CLK_SRC 106
+#define CAM_CC_MCLK4_CLK 107
+#define CAM_CC_MCLK4_CLK_SRC 108
+#define CAM_CC_MCLK5_CLK 109
+#define CAM_CC_MCLK5_CLK_SRC 110
+#define CAM_CC_MCLK6_CLK 111
+#define CAM_CC_MCLK6_CLK_SRC 112
+#define CAM_CC_MCLK7_CLK 113
+#define CAM_CC_MCLK7_CLK_SRC 114
+#define CAM_CC_PLL0 115
+#define CAM_CC_PLL0_OUT_EVEN 116
+#define CAM_CC_PLL0_OUT_ODD 117
+#define CAM_CC_PLL1 118
+#define CAM_CC_PLL2 119
+#define CAM_CC_PLL2_OUT_MAIN 120
+#define CAM_CC_PLL3 121
+#define CAM_CC_PLL4 122
+#define CAM_CC_PLL5 123
+#define CAM_CC_PLL6 124
+#define CAM_CC_SLOW_AHB_CLK_SRC 125
+#define CAM_CC_XO_CLK_SRC 126
+
+
+/* CAM_CC power domains */
+#define BPS_GDSC 0
+#define IFE_0_GDSC 1
+#define IFE_1_GDSC 2
+#define IFE_2_GDSC 3
+#define IFE_3_GDSC 4
+#define IPE_0_GDSC 5
+#define IPE_1_GDSC 6
+#define TITAN_TOP_GDSC 7
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_CAMNOC_BCR 1
+#define CAM_CC_CCI_BCR 2
+#define CAM_CC_CPAS_BCR 3
+#define CAM_CC_CSI0PHY_BCR 4
+#define CAM_CC_CSI1PHY_BCR 5
+#define CAM_CC_CSI2PHY_BCR 6
+#define CAM_CC_CSI3PHY_BCR 7
+#define CAM_CC_FD_BCR 8
+#define CAM_CC_ICP_BCR 9
+#define CAM_CC_IFE_0_BCR 10
+#define CAM_CC_IFE_1_BCR 11
+#define CAM_CC_IFE_2_BCR 12
+#define CAM_CC_IFE_3_BCR 13
+#define CAM_CC_IFE_LITE_0_BCR 14
+#define CAM_CC_IFE_LITE_1_BCR 15
+#define CAM_CC_IFE_LITE_2_BCR 16
+#define CAM_CC_IFE_LITE_3_BCR 17
+#define CAM_CC_IPE_0_BCR 18
+#define CAM_CC_IPE_1_BCR 19
+#define CAM_CC_JPEG_BCR 20
+#define CAM_CC_LRME_BCR 21
+#define CAM_CC_MCLK0_BCR 22
+#define CAM_CC_MCLK1_BCR 23
+#define CAM_CC_MCLK2_BCR 24
+#define CAM_CC_MCLK3_BCR 25
+#define CAM_CC_MCLK4_BCR 26
+#define CAM_CC_MCLK5_BCR 27
+#define CAM_CC_MCLK6_BCR 28
+#define CAM_CC_MCLK7_BCR 29
+
+#endif
#define GCC_USB_1_PHY_BCR 85
#define GCC_USB_2_PHY_BCR 86
#define GCC_VIDEO_BCR 87
+#define GCC_VIDEO_AXI0_CLK_ARES 88
+#define GCC_VIDEO_AXI1_CLK_ARES 89
#endif
#define R9A07G043_AX45MP_CORE0_RESETN 78 /* RZ/Five Only */
#define R9A07G043_IAX45_RESETN 79 /* RZ/Five Only */
-/* Power domain IDs. */
-#define R9A07G043_PD_ALWAYS_ON 0
-#define R9A07G043_PD_GIC 1 /* RZ/G2UL Only */
-#define R9A07G043_PD_IA55 2 /* RZ/G2UL Only */
-#define R9A07G043_PD_MHU 3 /* RZ/G2UL Only */
-#define R9A07G043_PD_CORESIGHT 4 /* RZ/G2UL Only */
-#define R9A07G043_PD_SYC 5 /* RZ/G2UL Only */
-#define R9A07G043_PD_DMAC 6
-#define R9A07G043_PD_GTM0 7
-#define R9A07G043_PD_GTM1 8
-#define R9A07G043_PD_GTM2 9
-#define R9A07G043_PD_MTU 10
-#define R9A07G043_PD_POE3 11
-#define R9A07G043_PD_WDT0 12
-#define R9A07G043_PD_SPI 13
-#define R9A07G043_PD_SDHI0 14
-#define R9A07G043_PD_SDHI1 15
-#define R9A07G043_PD_ISU 16 /* RZ/G2UL Only */
-#define R9A07G043_PD_CRU 17 /* RZ/G2UL Only */
-#define R9A07G043_PD_LCDC 18 /* RZ/G2UL Only */
-#define R9A07G043_PD_SSI0 19
-#define R9A07G043_PD_SSI1 20
-#define R9A07G043_PD_SSI2 21
-#define R9A07G043_PD_SSI3 22
-#define R9A07G043_PD_SRC 23
-#define R9A07G043_PD_USB0 24
-#define R9A07G043_PD_USB1 25
-#define R9A07G043_PD_USB_PHY 26
-#define R9A07G043_PD_ETHER0 27
-#define R9A07G043_PD_ETHER1 28
-#define R9A07G043_PD_I2C0 29
-#define R9A07G043_PD_I2C1 30
-#define R9A07G043_PD_I2C2 31
-#define R9A07G043_PD_I2C3 32
-#define R9A07G043_PD_SCIF0 33
-#define R9A07G043_PD_SCIF1 34
-#define R9A07G043_PD_SCIF2 35
-#define R9A07G043_PD_SCIF3 36
-#define R9A07G043_PD_SCIF4 37
-#define R9A07G043_PD_SCI0 38
-#define R9A07G043_PD_SCI1 39
-#define R9A07G043_PD_IRDA 40
-#define R9A07G043_PD_RSPI0 41
-#define R9A07G043_PD_RSPI1 42
-#define R9A07G043_PD_RSPI2 43
-#define R9A07G043_PD_CANFD 44
-#define R9A07G043_PD_ADC 45
-#define R9A07G043_PD_TSU 46
-#define R9A07G043_PD_PLIC 47 /* RZ/Five Only */
-#define R9A07G043_PD_IAX45 48 /* RZ/Five Only */
-#define R9A07G043_PD_NCEPLDM 49 /* RZ/Five Only */
-#define R9A07G043_PD_NCEPLMT 50 /* RZ/Five Only */
-
#endif /* __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ */
#define R9A07G044_ADC_ADRST_N 82
#define R9A07G044_TSU_PRESETN 83
-/* Power domain IDs. */
-#define R9A07G044_PD_ALWAYS_ON 0
-#define R9A07G044_PD_GIC 1
-#define R9A07G044_PD_IA55 2
-#define R9A07G044_PD_MHU 3
-#define R9A07G044_PD_CORESIGHT 4
-#define R9A07G044_PD_SYC 5
-#define R9A07G044_PD_DMAC 6
-#define R9A07G044_PD_GTM0 7
-#define R9A07G044_PD_GTM1 8
-#define R9A07G044_PD_GTM2 9
-#define R9A07G044_PD_MTU 10
-#define R9A07G044_PD_POE3 11
-#define R9A07G044_PD_GPT 12
-#define R9A07G044_PD_POEGA 13
-#define R9A07G044_PD_POEGB 14
-#define R9A07G044_PD_POEGC 15
-#define R9A07G044_PD_POEGD 16
-#define R9A07G044_PD_WDT0 17
-#define R9A07G044_PD_WDT1 18
-#define R9A07G044_PD_SPI 19
-#define R9A07G044_PD_SDHI0 20
-#define R9A07G044_PD_SDHI1 21
-#define R9A07G044_PD_3DGE 22
-#define R9A07G044_PD_ISU 23
-#define R9A07G044_PD_VCPL4 24
-#define R9A07G044_PD_CRU 25
-#define R9A07G044_PD_MIPI_DSI 26
-#define R9A07G044_PD_LCDC 27
-#define R9A07G044_PD_SSI0 28
-#define R9A07G044_PD_SSI1 29
-#define R9A07G044_PD_SSI2 30
-#define R9A07G044_PD_SSI3 31
-#define R9A07G044_PD_SRC 32
-#define R9A07G044_PD_USB0 33
-#define R9A07G044_PD_USB1 34
-#define R9A07G044_PD_USB_PHY 35
-#define R9A07G044_PD_ETHER0 36
-#define R9A07G044_PD_ETHER1 37
-#define R9A07G044_PD_I2C0 38
-#define R9A07G044_PD_I2C1 39
-#define R9A07G044_PD_I2C2 40
-#define R9A07G044_PD_I2C3 41
-#define R9A07G044_PD_SCIF0 42
-#define R9A07G044_PD_SCIF1 43
-#define R9A07G044_PD_SCIF2 44
-#define R9A07G044_PD_SCIF3 45
-#define R9A07G044_PD_SCIF4 46
-#define R9A07G044_PD_SCI0 47
-#define R9A07G044_PD_SCI1 48
-#define R9A07G044_PD_IRDA 49
-#define R9A07G044_PD_RSPI0 50
-#define R9A07G044_PD_RSPI1 51
-#define R9A07G044_PD_RSPI2 52
-#define R9A07G044_PD_CANFD 53
-#define R9A07G044_PD_ADC 54
-#define R9A07G044_PD_TSU 55
-
#endif /* __DT_BINDINGS_CLOCK_R9A07G044_CPG_H__ */
#define R9A07G054_TSU_PRESETN 83
#define R9A07G054_STPAI_ARESETN 84
-/* Power domain IDs. */
-#define R9A07G054_PD_ALWAYS_ON 0
-#define R9A07G054_PD_GIC 1
-#define R9A07G054_PD_IA55 2
-#define R9A07G054_PD_MHU 3
-#define R9A07G054_PD_CORESIGHT 4
-#define R9A07G054_PD_SYC 5
-#define R9A07G054_PD_DMAC 6
-#define R9A07G054_PD_GTM0 7
-#define R9A07G054_PD_GTM1 8
-#define R9A07G054_PD_GTM2 9
-#define R9A07G054_PD_MTU 10
-#define R9A07G054_PD_POE3 11
-#define R9A07G054_PD_GPT 12
-#define R9A07G054_PD_POEGA 13
-#define R9A07G054_PD_POEGB 14
-#define R9A07G054_PD_POEGC 15
-#define R9A07G054_PD_POEGD 16
-#define R9A07G054_PD_WDT0 17
-#define R9A07G054_PD_WDT1 18
-#define R9A07G054_PD_SPI 19
-#define R9A07G054_PD_SDHI0 20
-#define R9A07G054_PD_SDHI1 21
-#define R9A07G054_PD_3DGE 22
-#define R9A07G054_PD_ISU 23
-#define R9A07G054_PD_VCPL4 24
-#define R9A07G054_PD_CRU 25
-#define R9A07G054_PD_MIPI_DSI 26
-#define R9A07G054_PD_LCDC 27
-#define R9A07G054_PD_SSI0 28
-#define R9A07G054_PD_SSI1 29
-#define R9A07G054_PD_SSI2 30
-#define R9A07G054_PD_SSI3 31
-#define R9A07G054_PD_SRC 32
-#define R9A07G054_PD_USB0 33
-#define R9A07G054_PD_USB1 34
-#define R9A07G054_PD_USB_PHY 35
-#define R9A07G054_PD_ETHER0 36
-#define R9A07G054_PD_ETHER1 37
-#define R9A07G054_PD_I2C0 38
-#define R9A07G054_PD_I2C1 39
-#define R9A07G054_PD_I2C2 40
-#define R9A07G054_PD_I2C3 41
-#define R9A07G054_PD_SCIF0 42
-#define R9A07G054_PD_SCIF1 43
-#define R9A07G054_PD_SCIF2 44
-#define R9A07G054_PD_SCIF3 45
-#define R9A07G054_PD_SCIF4 46
-#define R9A07G054_PD_SCI0 47
-#define R9A07G054_PD_SCI1 48
-#define R9A07G054_PD_IRDA 49
-#define R9A07G054_PD_RSPI0 50
-#define R9A07G054_PD_RSPI1 51
-#define R9A07G054_PD_RSPI2 52
-#define R9A07G054_PD_CANFD 53
-#define R9A07G054_PD_ADC 54
-#define R9A07G054_PD_TSU 55
-
#endif /* __DT_BINDINGS_CLOCK_R9A07G054_CPG_H__ */
#define R9A08G045_I3C_PRESETN 92
#define R9A08G045_VBAT_BRESETN 93
-/* Power domain IDs. */
-#define R9A08G045_PD_ALWAYS_ON 0
-#define R9A08G045_PD_GIC 1
-#define R9A08G045_PD_IA55 2
-#define R9A08G045_PD_MHU 3
-#define R9A08G045_PD_CORESIGHT 4
-#define R9A08G045_PD_SYC 5
-#define R9A08G045_PD_DMAC 6
-#define R9A08G045_PD_GTM0 7
-#define R9A08G045_PD_GTM1 8
-#define R9A08G045_PD_GTM2 9
-#define R9A08G045_PD_GTM3 10
-#define R9A08G045_PD_GTM4 11
-#define R9A08G045_PD_GTM5 12
-#define R9A08G045_PD_GTM6 13
-#define R9A08G045_PD_GTM7 14
-#define R9A08G045_PD_MTU 15
-#define R9A08G045_PD_POE3 16
-#define R9A08G045_PD_GPT 17
-#define R9A08G045_PD_POEGA 18
-#define R9A08G045_PD_POEGB 19
-#define R9A08G045_PD_POEGC 20
-#define R9A08G045_PD_POEGD 21
-#define R9A08G045_PD_WDT0 22
-#define R9A08G045_PD_XSPI 23
-#define R9A08G045_PD_SDHI0 24
-#define R9A08G045_PD_SDHI1 25
-#define R9A08G045_PD_SDHI2 26
-#define R9A08G045_PD_SSI0 27
-#define R9A08G045_PD_SSI1 28
-#define R9A08G045_PD_SSI2 29
-#define R9A08G045_PD_SSI3 30
-#define R9A08G045_PD_SRC 31
-#define R9A08G045_PD_USB0 32
-#define R9A08G045_PD_USB1 33
-#define R9A08G045_PD_USB_PHY 34
-#define R9A08G045_PD_ETHER0 35
-#define R9A08G045_PD_ETHER1 36
-#define R9A08G045_PD_I2C0 37
-#define R9A08G045_PD_I2C1 38
-#define R9A08G045_PD_I2C2 39
-#define R9A08G045_PD_I2C3 40
-#define R9A08G045_PD_SCIF0 41
-#define R9A08G045_PD_SCIF1 42
-#define R9A08G045_PD_SCIF2 43
-#define R9A08G045_PD_SCIF3 44
-#define R9A08G045_PD_SCIF4 45
-#define R9A08G045_PD_SCIF5 46
-#define R9A08G045_PD_SCI0 47
-#define R9A08G045_PD_SCI1 48
-#define R9A08G045_PD_IRDA 49
-#define R9A08G045_PD_RSPI0 50
-#define R9A08G045_PD_RSPI1 51
-#define R9A08G045_PD_RSPI2 52
-#define R9A08G045_PD_RSPI3 53
-#define R9A08G045_PD_RSPI4 54
-#define R9A08G045_PD_CANFD 55
-#define R9A08G045_PD_ADC 56
-#define R9A08G045_PD_TSU 57
-#define R9A08G045_PD_OCTA 58
-#define R9A08G045_PD_PDM 59
-#define R9A08G045_PD_PCI 60
-#define R9A08G045_PD_SPDIF 61
-#define R9A08G045_PD_I3C 62
-#define R9A08G045_PD_VBAT 63
-
-#define R9A08G045_PD_DDR 64
-#define R9A08G045_PD_TZCDDR 65
-#define R9A08G045_PD_OTFDE_DDR 66
-#define R9A08G045_PD_RTC 67
-
#endif /* __DT_BINDINGS_CLOCK_R9A08G045_CPG_H__ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021 Raspberry Pi Ltd.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_RASPBERRYPI_RP1
+#define __DT_BINDINGS_CLOCK_RASPBERRYPI_RP1
+
+#define RP1_PLL_SYS_CORE 0
+#define RP1_PLL_AUDIO_CORE 1
+#define RP1_PLL_VIDEO_CORE 2
+
+#define RP1_PLL_SYS 3
+#define RP1_PLL_AUDIO 4
+#define RP1_PLL_VIDEO 5
+
+#define RP1_PLL_SYS_PRI_PH 6
+#define RP1_PLL_SYS_SEC_PH 7
+#define RP1_PLL_AUDIO_PRI_PH 8
+
+#define RP1_PLL_SYS_SEC 9
+#define RP1_PLL_AUDIO_SEC 10
+#define RP1_PLL_VIDEO_SEC 11
+
+#define RP1_CLK_SYS 12
+#define RP1_CLK_SLOW_SYS 13
+#define RP1_CLK_DMA 14
+#define RP1_CLK_UART 15
+#define RP1_CLK_ETH 16
+#define RP1_CLK_PWM0 17
+#define RP1_CLK_PWM1 18
+#define RP1_CLK_AUDIO_IN 19
+#define RP1_CLK_AUDIO_OUT 20
+#define RP1_CLK_I2S 21
+#define RP1_CLK_MIPI0_CFG 22
+#define RP1_CLK_MIPI1_CFG 23
+#define RP1_CLK_PCIE_AUX 24
+#define RP1_CLK_USBH0_MICROFRAME 25
+#define RP1_CLK_USBH1_MICROFRAME 26
+#define RP1_CLK_USBH0_SUSPEND 27
+#define RP1_CLK_USBH1_SUSPEND 28
+#define RP1_CLK_ETH_TSU 29
+#define RP1_CLK_ADC 30
+#define RP1_CLK_SDIO_TIMER 31
+#define RP1_CLK_SDIO_ALT_SRC 32
+#define RP1_CLK_GP0 33
+#define RP1_CLK_GP1 34
+#define RP1_CLK_GP2 35
+#define RP1_CLK_GP3 36
+#define RP1_CLK_GP4 37
+#define RP1_CLK_GP5 38
+#define RP1_CLK_VEC 39
+#define RP1_CLK_DPI 40
+#define RP1_CLK_MIPI0_DPI 41
+#define RP1_CLK_MIPI1_DPI 42
+
+/* Extra PLL output channels - RP1B0 only */
+#define RP1_PLL_VIDEO_PRI_PH 43
+#define RP1_PLL_AUDIO_TERN 44
+
+#endif
#define R9A09G056_USB2_0_CLK_CORE0 9
#define R9A09G056_GBETH_0_CLK_PTP_REF_I 10
#define R9A09G056_GBETH_1_CLK_PTP_REF_I 11
+#define R9A09G056_SPI_CLK_SPI 12
#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G056_CPG_H__ */
#define R9A09G057_USB2_0_CLK_CORE1 10
#define R9A09G057_GBETH_0_CLK_PTP_REF_I 11
#define R9A09G057_GBETH_1_CLK_PTP_REF_I 12
+#define R9A09G057_SPI_CLK_SPI 13
#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_R9A09G077_CPG_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_R9A09G077_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R9A09G077 CPG Core Clocks */
+#define R9A09G077_CLK_CA55C0 0
+#define R9A09G077_CLK_CA55C1 1
+#define R9A09G077_CLK_CA55C2 2
+#define R9A09G077_CLK_CA55C3 3
+#define R9A09G077_CLK_CA55S 4
+#define R9A09G077_CLK_CR52_CPU0 5
+#define R9A09G077_CLK_CR52_CPU1 6
+#define R9A09G077_CLK_CKIO 7
+#define R9A09G077_CLK_PCLKAH 8
+#define R9A09G077_CLK_PCLKAM 9
+#define R9A09G077_CLK_PCLKAL 10
+#define R9A09G077_CLK_PCLKGPTL 11
+#define R9A09G077_CLK_PCLKH 12
+#define R9A09G077_CLK_PCLKM 13
+#define R9A09G077_CLK_PCLKL 14
+#define R9A09G077_SDHI_CLKHS 15
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G077_CPG_H__ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_R9A09G087_CPG_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_R9A09G087_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R9A09G087 CPG Core Clocks */
+#define R9A09G087_CLK_CA55C0 0
+#define R9A09G087_CLK_CA55C1 1
+#define R9A09G087_CLK_CA55C2 2
+#define R9A09G087_CLK_CA55C3 3
+#define R9A09G087_CLK_CA55S 4
+#define R9A09G087_CLK_CR52_CPU0 5
+#define R9A09G087_CLK_CR52_CPU1 6
+#define R9A09G087_CLK_CKIO 7
+#define R9A09G087_CLK_PCLKAH 8
+#define R9A09G087_CLK_PCLKAM 9
+#define R9A09G087_CLK_PCLKAL 10
+#define R9A09G087_CLK_PCLKGPTL 11
+#define R9A09G087_CLK_PCLKH 12
+#define R9A09G087_CLK_PCLKM 13
+#define R9A09G087_CLK_PCLKL 14
+#define R9A09G087_SDHI_CLKHS 15
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G087_CPG_H__ */
#define CLK_MOUT_HSI1_USBDRD_USER 3
#define CLK_MOUT_HSI1_USBDRD 4
+/* CMU_HSI2 */
+#define FOUT_PLL_ETH 1
+#define CLK_MOUT_HSI2_NOC_UFS_USER 2
+#define CLK_MOUT_HSI2_UFS_EMBD_USER 3
+#define CLK_MOUT_HSI2_ETHERNET 4
+#define CLK_MOUT_HSI2_ETHERNET_USER 5
+#define CLK_DOUT_HSI2_ETHERNET 6
+#define CLK_DOUT_HSI2_ETHERNET_PTP 7
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV920_H */
#define CLK_APB 31
#define CLK_WDT_BUS 32
+/* MPMU resets */
+#define RESET_WDT 0
+
/* APBC clocks */
#define CLK_UART0 0
#define CLK_UART2 1
#define CLK_TSEN_BUS 98
#define CLK_IPC_AP2AUD_BUS 99
+/* APBC resets */
+#define RESET_UART0 0
+#define RESET_UART2 1
+#define RESET_UART3 2
+#define RESET_UART4 3
+#define RESET_UART5 4
+#define RESET_UART6 5
+#define RESET_UART7 6
+#define RESET_UART8 7
+#define RESET_UART9 8
+#define RESET_GPIO 9
+#define RESET_PWM0 10
+#define RESET_PWM1 11
+#define RESET_PWM2 12
+#define RESET_PWM3 13
+#define RESET_PWM4 14
+#define RESET_PWM5 15
+#define RESET_PWM6 16
+#define RESET_PWM7 17
+#define RESET_PWM8 18
+#define RESET_PWM9 19
+#define RESET_PWM10 20
+#define RESET_PWM11 21
+#define RESET_PWM12 22
+#define RESET_PWM13 23
+#define RESET_PWM14 24
+#define RESET_PWM15 25
+#define RESET_PWM16 26
+#define RESET_PWM17 27
+#define RESET_PWM18 28
+#define RESET_PWM19 29
+#define RESET_SSP3 30
+#define RESET_RTC 31
+#define RESET_TWSI0 32
+#define RESET_TWSI1 33
+#define RESET_TWSI2 34
+#define RESET_TWSI4 35
+#define RESET_TWSI5 36
+#define RESET_TWSI6 37
+#define RESET_TWSI7 38
+#define RESET_TWSI8 39
+#define RESET_TIMERS1 40
+#define RESET_TIMERS2 41
+#define RESET_AIB 42
+#define RESET_ONEWIRE 43
+#define RESET_SSPA0 44
+#define RESET_SSPA1 45
+#define RESET_DRO 46
+#define RESET_IR 47
+#define RESET_TSEN 48
+#define RESET_IPC_AP2AUD 49
+#define RESET_CAN0 50
+
/* APMU clocks */
#define CLK_CCI550 0
#define CLK_CPU_C0_HI 1
#define CLK_V2D 60
#define CLK_EMMC_BUS 61
+/* APMU resets */
+#define RESET_CCIC_4X 0
+#define RESET_CCIC1_PHY 1
+#define RESET_SDH_AXI 2
+#define RESET_SDH0 3
+#define RESET_SDH1 4
+#define RESET_SDH2 5
+#define RESET_USBP1_AXI 6
+#define RESET_USB_AXI 7
+#define RESET_USB30_AHB 8
+#define RESET_USB30_VCC 9
+#define RESET_USB30_PHY 10
+#define RESET_QSPI 11
+#define RESET_QSPI_BUS 12
+#define RESET_DMA 13
+#define RESET_AES 14
+#define RESET_VPU 15
+#define RESET_GPU 16
+#define RESET_EMMC 17
+#define RESET_EMMC_X 18
+#define RESET_AUDIO_SYS 19
+#define RESET_AUDIO_MCU 20
+#define RESET_AUDIO_APMU 21
+#define RESET_HDMI 22
+#define RESET_PCIE0_MASTER 23
+#define RESET_PCIE0_SLAVE 24
+#define RESET_PCIE0_DBI 25
+#define RESET_PCIE0_GLOBAL 26
+#define RESET_PCIE1_MASTER 27
+#define RESET_PCIE1_SLAVE 28
+#define RESET_PCIE1_DBI 29
+#define RESET_PCIE1_GLOBAL 30
+#define RESET_PCIE2_MASTER 31
+#define RESET_PCIE2_SLAVE 32
+#define RESET_PCIE2_DBI 33
+#define RESET_PCIE2_GLOBAL 34
+#define RESET_EMAC0 35
+#define RESET_EMAC1 36
+#define RESET_JPG 37
+#define RESET_CCIC2PHY 38
+#define RESET_CCIC3PHY 39
+#define RESET_CSI 40
+#define RESET_ISP_CPP 41
+#define RESET_ISP_BUS 42
+#define RESET_ISP 43
+#define RESET_ISP_CI 44
+#define RESET_DPU_MCLK 45
+#define RESET_DPU_ESC 46
+#define RESET_DPU_HCLK 47
+#define RESET_DPU_SPIBUS 48
+#define RESET_DPU_SPI_HBUS 49
+#define RESET_V2D 50
+#define RESET_MIPI 51
+#define RESET_MC 52
+
+/* RCPU resets */
+#define RESET_RCPU_SSP0 0
+#define RESET_RCPU_I2C0 1
+#define RESET_RCPU_UART1 2
+#define RESET_RCPU_IR 3
+#define RESET_RCPU_CAN 4
+#define RESET_RCPU_UART0 5
+#define RESET_RCPU_HDMI_AUDIO 6
+
+/* RCPU2 resets */
+#define RESET_RCPU2_PWM0 0
+#define RESET_RCPU2_PWM1 1
+#define RESET_RCPU2_PWM2 2
+#define RESET_RCPU2_PWM3 3
+#define RESET_RCPU2_PWM4 4
+#define RESET_RCPU2_PWM5 5
+#define RESET_RCPU2_PWM6 6
+#define RESET_RCPU2_PWM7 7
+#define RESET_RCPU2_PWM8 8
+#define RESET_RCPU2_PWM9 9
+
+/* APBC2 resets */
+#define RESET_APBC2_UART1 0
+#define RESET_APBC2_SSP2 1
+#define RESET_APBC2_TWSI3 2
+#define RESET_APBC2_RTC 3
+#define RESET_APBC2_TIMERS0 4
+#define RESET_APBC2_KPC 5
+#define RESET_APBC2_GPIO 6
+
#endif /* _DT_BINDINGS_SPACEMIT_CCU_H_ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_ADI_AD7768_1_H
+#define _DT_BINDINGS_ADI_AD7768_1_H
+
+#define AD7768_TRIGGER_SOURCE_SYNC_OUT 0
+#define AD7768_TRIGGER_SOURCE_GPIO3 1
+#define AD7768_TRIGGER_SOURCE_DRDY 2
+
+#endif /* _DT_BINDINGS_ADI_AD7768_1_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef _DT_BINDINGS_MEDIATEK_MT6363_AUXADC_H
+#define _DT_BINDINGS_MEDIATEK_MT6363_AUXADC_H
+
+/* ADC Channel Index */
+#define MT6363_AUXADC_BATADC 0
+#define MT6363_AUXADC_VCDT 1
+#define MT6363_AUXADC_BAT_TEMP 2
+#define MT6363_AUXADC_CHIP_TEMP 3
+#define MT6363_AUXADC_VSYSSNS 4
+#define MT6363_AUXADC_VTREF 5
+#define MT6363_AUXADC_VCORE_TEMP 6
+#define MT6363_AUXADC_VPROC_TEMP 7
+#define MT6363_AUXADC_VGPU_TEMP 8
+#define MT6363_AUXADC_VIN1 9
+#define MT6363_AUXADC_VIN2 10
+#define MT6363_AUXADC_VIN3 11
+#define MT6363_AUXADC_VIN4 12
+#define MT6363_AUXADC_VIN5 13
+#define MT6363_AUXADC_VIN6 14
+#define MT6363_AUXADC_VIN7 15
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef _DT_BINDINGS_MEDIATEK_MT6373_AUXADC_H
+#define _DT_BINDINGS_MEDIATEK_MT6373_AUXADC_H
+
+/* ADC Channel Index */
+#define MT6373_AUXADC_CHIP_TEMP 0
+#define MT6373_AUXADC_VCORE_TEMP 1
+#define MT6373_AUXADC_VPROC_TEMP 2
+#define MT6373_AUXADC_VGPU_TEMP 3
+#define MT6373_AUXADC_VIN1 4
+#define MT6373_AUXADC_VIN2 5
+#define MT6373_AUXADC_VIN3 6
+#define MT6373_AUXADC_VIN4 7
+#define MT6373_AUXADC_VIN5 8
+#define MT6373_AUXADC_VIN6 9
+#define MT6373_AUXADC_VIN7 10
+
+#endif
#define BTN_DPAD_LEFT 0x222
#define BTN_DPAD_RIGHT 0x223
+#define BTN_GRIPL 0x224
+#define BTN_GRIPR 0x225
+#define BTN_GRIPL2 0x226
+#define BTN_GRIPR2 0x227
+
#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
#define KEY_ROTATE_LOCK_TOGGLE 0x231 /* Display rotation lock */
#define KEY_REFRESH_RATE_TOGGLE 0x232 /* Display refresh rate toggle */
#define KEY_KBD_LCD_MENU4 0x2bb
#define KEY_KBD_LCD_MENU5 0x2bc
+/* Performance Boost key (Alienware)/G-Mode key (Dell) */
+#define KEY_PERFORMANCE 0x2bd
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MILOS_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MILOS_H
+
+#define MASTER_QUP_1 0
+#define MASTER_UFS_MEM 1
+#define MASTER_USB3_0 2
+#define SLAVE_A1NOC_SNOC 3
+
+#define MASTER_QDSS_BAM 0
+#define MASTER_QSPI_0 1
+#define MASTER_QUP_0 2
+#define MASTER_CRYPTO 3
+#define MASTER_IPA 4
+#define MASTER_QDSS_ETR 5
+#define MASTER_QDSS_ETR_1 6
+#define MASTER_SDCC_1 7
+#define MASTER_SDCC_2 8
+#define SLAVE_A2NOC_SNOC 9
+
+#define MASTER_QUP_CORE_0 0
+#define MASTER_QUP_CORE_1 1
+#define SLAVE_QUP_CORE_0 2
+#define SLAVE_QUP_CORE_1 3
+
+#define MASTER_CNOC_CFG 0
+#define SLAVE_AHB2PHY_SOUTH 1
+#define SLAVE_AHB2PHY_NORTH 2
+#define SLAVE_CAMERA_CFG 3
+#define SLAVE_CLK_CTL 4
+#define SLAVE_RBCPR_CX_CFG 5
+#define SLAVE_RBCPR_MXA_CFG 6
+#define SLAVE_CRYPTO_0_CFG 7
+#define SLAVE_CX_RDPM 8
+#define SLAVE_GFX3D_CFG 9
+#define SLAVE_IMEM_CFG 10
+#define SLAVE_CNOC_MSS 11
+#define SLAVE_MX_2_RDPM 12
+#define SLAVE_MX_RDPM 13
+#define SLAVE_PDM 14
+#define SLAVE_QDSS_CFG 15
+#define SLAVE_QSPI_0 16
+#define SLAVE_QUP_0 17
+#define SLAVE_QUP_1 18
+#define SLAVE_SDC1 19
+#define SLAVE_SDCC_2 20
+#define SLAVE_TCSR 21
+#define SLAVE_TLMM 22
+#define SLAVE_UFS_MEM_CFG 23
+#define SLAVE_USB3_0 24
+#define SLAVE_VENUS_CFG 25
+#define SLAVE_VSENSE_CTRL_CFG 26
+#define SLAVE_WLAN 27
+#define SLAVE_CNOC_MNOC_HF_CFG 28
+#define SLAVE_CNOC_MNOC_SF_CFG 29
+#define SLAVE_NSP_QTB_CFG 30
+#define SLAVE_PCIE_ANOC_CFG 31
+#define SLAVE_WLAN_Q6_THROTTLE_CFG 32
+#define SLAVE_SERVICE_CNOC_CFG 33
+#define SLAVE_QDSS_STM 34
+#define SLAVE_TCU 35
+
+#define MASTER_GEM_NOC_CNOC 0
+#define MASTER_GEM_NOC_PCIE_SNOC 1
+#define SLAVE_AOSS 2
+#define SLAVE_DISPLAY_CFG 3
+#define SLAVE_IPA_CFG 4
+#define SLAVE_IPC_ROUTER_CFG 5
+#define SLAVE_PCIE_0_CFG 6
+#define SLAVE_PCIE_1_CFG 7
+#define SLAVE_PRNG 8
+#define SLAVE_TME_CFG 9
+#define SLAVE_APPSS 10
+#define SLAVE_CNOC_CFG 11
+#define SLAVE_DDRSS_CFG 12
+#define SLAVE_IMEM 13
+#define SLAVE_PIMEM 14
+#define SLAVE_SERVICE_CNOC 15
+#define SLAVE_PCIE_0 16
+#define SLAVE_PCIE_1 17
+
+#define MASTER_GPU_TCU 0
+#define MASTER_SYS_TCU 1
+#define MASTER_APPSS_PROC 2
+#define MASTER_GFX3D 3
+#define MASTER_LPASS_GEM_NOC 4
+#define MASTER_MSS_PROC 5
+#define MASTER_MNOC_HF_MEM_NOC 6
+#define MASTER_MNOC_SF_MEM_NOC 7
+#define MASTER_COMPUTE_NOC 8
+#define MASTER_ANOC_PCIE_GEM_NOC 9
+#define MASTER_SNOC_GC_MEM_NOC 10
+#define MASTER_SNOC_SF_MEM_NOC 11
+#define MASTER_WLAN_Q6 12
+#define SLAVE_GEM_NOC_CNOC 13
+#define SLAVE_LLCC 14
+#define SLAVE_MEM_NOC_PCIE_SNOC 15
+
+#define MASTER_LPASS_PROC 0
+#define SLAVE_LPASS_GEM_NOC 1
+
+#define MASTER_LLCC 0
+#define SLAVE_EBI1 1
+
+#define MASTER_CAMNOC_HF 0
+#define MASTER_CAMNOC_ICP 1
+#define MASTER_CAMNOC_SF 2
+#define MASTER_MDP 3
+#define MASTER_VIDEO 4
+#define MASTER_CNOC_MNOC_HF_CFG 5
+#define MASTER_CNOC_MNOC_SF_CFG 6
+#define SLAVE_MNOC_HF_MEM_NOC 7
+#define SLAVE_MNOC_SF_MEM_NOC 8
+#define SLAVE_SERVICE_MNOC_HF 9
+#define SLAVE_SERVICE_MNOC_SF 10
+
+#define MASTER_CDSP_PROC 0
+#define SLAVE_CDSP_MEM_NOC 1
+
+#define MASTER_PCIE_ANOC_CFG 0
+#define MASTER_PCIE_0 1
+#define MASTER_PCIE_1 2
+#define SLAVE_ANOC_PCIE_GEM_NOC 3
+#define SLAVE_SERVICE_PCIE_ANOC 4
+
+#define MASTER_A1NOC_SNOC 0
+#define MASTER_A2NOC_SNOC 1
+#define MASTER_APSS_NOC 2
+#define MASTER_CNOC_SNOC 3
+#define MASTER_PIMEM 4
+#define MASTER_GIC 5
+#define SLAVE_SNOC_GEM_NOC_GC 6
+#define SLAVE_SNOC_GEM_NOC_SF 7
+
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Copyright (c) 2025, NVIDIA CORPORATION. All rights reserved. */
+
+#ifndef DT_BINDINGS_MEMORY_NVIDIA_TEGRA264_H
+#define DT_BINDINGS_MEMORY_NVIDIA_TEGRA264_H
+
+#define TEGRA264_SID(x) ((x) << 8)
+
+/*
+ * SMMU stream IDs
+ */
+
+#define TEGRA264_SID_AON TEGRA264_SID(0x01)
+#define TEGRA264_SID_APE TEGRA264_SID(0x02)
+#define TEGRA264_SID_ETR TEGRA264_SID(0x03)
+#define TEGRA264_SID_BPMP TEGRA264_SID(0x04)
+#define TEGRA264_SID_DCE TEGRA264_SID(0x05)
+#define TEGRA264_SID_EQOS TEGRA264_SID(0x06)
+#define TEGRA264_SID_GPCDMA TEGRA264_SID(0x08)
+#define TEGRA264_SID_DISP TEGRA264_SID(0x09)
+#define TEGRA264_SID_HDA TEGRA264_SID(0x0a)
+#define TEGRA264_SID_HOST1X TEGRA264_SID(0x0b)
+#define TEGRA264_SID_ISP0 TEGRA264_SID(0x0c)
+#define TEGRA264_SID_ISP1 TEGRA264_SID(0x0d)
+#define TEGRA264_SID_PMA0 TEGRA264_SID(0x0e)
+#define TEGRA264_SID_FSI0 TEGRA264_SID(0x0f)
+#define TEGRA264_SID_FSI1 TEGRA264_SID(0x10)
+#define TEGRA264_SID_PVA TEGRA264_SID(0x11)
+#define TEGRA264_SID_SDMMC0 TEGRA264_SID(0x12)
+#define TEGRA264_SID_MGBE0 TEGRA264_SID(0x13)
+#define TEGRA264_SID_MGBE1 TEGRA264_SID(0x14)
+#define TEGRA264_SID_MGBE2 TEGRA264_SID(0x15)
+#define TEGRA264_SID_MGBE3 TEGRA264_SID(0x16)
+#define TEGRA264_SID_MSSSEQ TEGRA264_SID(0x17)
+#define TEGRA264_SID_SE TEGRA264_SID(0x18)
+#define TEGRA264_SID_SEU1 TEGRA264_SID(0x19)
+#define TEGRA264_SID_SEU2 TEGRA264_SID(0x1a)
+#define TEGRA264_SID_SEU3 TEGRA264_SID(0x1b)
+#define TEGRA264_SID_PSC TEGRA264_SID(0x1c)
+#define TEGRA264_SID_OESP TEGRA264_SID(0x23)
+#define TEGRA264_SID_SB TEGRA264_SID(0x24)
+#define TEGRA264_SID_XSPI0 TEGRA264_SID(0x25)
+#define TEGRA264_SID_TSEC TEGRA264_SID(0x29)
+#define TEGRA264_SID_UFS TEGRA264_SID(0x2a)
+#define TEGRA264_SID_RCE TEGRA264_SID(0x2b)
+#define TEGRA264_SID_RCE1 TEGRA264_SID(0x2c)
+#define TEGRA264_SID_VI TEGRA264_SID(0x2e)
+#define TEGRA264_SID_VI1 TEGRA264_SID(0x2f)
+#define TEGRA264_SID_VIC TEGRA264_SID(0x30)
+#define TEGRA264_SID_XUSB_DEV TEGRA264_SID(0x32)
+#define TEGRA264_SID_XUSB_DEV1 TEGRA264_SID(0x33)
+#define TEGRA264_SID_XUSB_DEV2 TEGRA264_SID(0x34)
+#define TEGRA264_SID_XUSB_DEV3 TEGRA264_SID(0x35)
+#define TEGRA264_SID_XUSB_DEV4 TEGRA264_SID(0x36)
+#define TEGRA264_SID_XUSB_DEV5 TEGRA264_SID(0x37)
+
+/*
+ * memory client IDs
+ */
+
+/* HOST1X read client */
+#define TEGRA264_MEMORY_CLIENT_HOST1XR 0x16
+/* VIC read client */
+#define TEGRA264_MEMORY_CLIENT_VICR 0x6c
+/* VIC Write client */
+#define TEGRA264_MEMORY_CLIENT_VICW 0x6d
+/* VI R5 Write client */
+#define TEGRA264_MEMORY_CLIENT_VIW 0x72
+#define TEGRA264_MEMORY_CLIENT_NVDECSRD2MC 0x78
+#define TEGRA264_MEMORY_CLIENT_NVDECSWR2MC 0x79
+/* Audio processor(APE) Read client */
+#define TEGRA264_MEMORY_CLIENT_APER 0x7a
+/* Audio processor(APE) Write client */
+#define TEGRA264_MEMORY_CLIENT_APEW 0x7b
+/* Audio DMA Read client */
+#define TEGRA264_MEMORY_CLIENT_APEDMAR 0x9f
+/* Audio DMA Write client */
+#define TEGRA264_MEMORY_CLIENT_APEDMAW 0xa0
+#define TEGRA264_MEMORY_CLIENT_GPUR02MC 0xb6
+#define TEGRA264_MEMORY_CLIENT_GPUW02MC 0xb7
+/* VI Falcon Read client */
+#define TEGRA264_MEMORY_CLIENT_VIFALCONR 0xbc
+/* VI Falcon Write client */
+#define TEGRA264_MEMORY_CLIENT_VIFALCONW 0xbd
+/* Read Client of RCE */
+#define TEGRA264_MEMORY_CLIENT_RCER 0xd2
+/* Write client of RCE */
+#define TEGRA264_MEMORY_CLIENT_RCEW 0xd3
+/* PCIE0/MSI Write clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE0W 0xd9
+/* PCIE1/RPX4 Read clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE1R 0xda
+/* PCIE1/RPX4 Write clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE1W 0xdb
+/* PCIE2/DMX4 Read clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE2AR 0xdc
+/* PCIE2/DMX4 Write clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE2AW 0xdd
+/* PCIE3/RPX4 Read clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE3R 0xde
+/* PCIE3/RPX4 Write clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE3W 0xdf
+/* PCIE4/DMX8 Read clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE4R 0xe0
+/* PCIE4/DMX8 Write clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE4W 0xe1
+/* PCIE5/DMX4 Read clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE5R 0xe2
+/* PCIE5/DMX4 Write clients */
+#define TEGRA264_MEMORY_CLIENT_PCIE5W 0xe3
+/* UFS Read client */
+#define TEGRA264_MEMORY_CLIENT_UFSR 0x15c
+/* UFS write client */
+#define TEGRA264_MEMORY_CLIENT_UFSW 0x15d
+/* HDA Read client */
+#define TEGRA264_MEMORY_CLIENT_HDAR 0x17c
+/* HDA Write client */
+#define TEGRA264_MEMORY_CLIENT_HDAW 0x17d
+/* Disp ISO Read Client */
+#define TEGRA264_MEMORY_CLIENT_DISPR 0x182
+/* MGBE0 Read mccif */
+#define TEGRA264_MEMORY_CLIENT_MGBE0R 0x1a2
+/* MGBE0 Write mccif */
+#define TEGRA264_MEMORY_CLIENT_MGBE0W 0x1a3
+/* MGBE1 Read mccif */
+#define TEGRA264_MEMORY_CLIENT_MGBE1R 0x1a4
+/* MGBE1 Write mccif */
+#define TEGRA264_MEMORY_CLIENT_MGBE1W 0x1a5
+/* VI1 R5 Write client */
+#define TEGRA264_MEMORY_CLIENT_VI1W 0x1a6
+/* SDMMC0 Read mccif */
+#define TEGRA264_MEMORY_CLIENT_SDMMC0R 0x1c2
+/* SDMMC0 Write mccif */
+#define TEGRA264_MEMORY_CLIENT_SDMMC0W 0x1c3
+
+#endif /* DT_BINDINGS_MEMORY_NVIDIA_TEGRA264_H */
#define AF14 0xf
#define AF15 0x10
#define ANALOG 0x11
+#define RSVD 0x12
/* define Pins number*/
#define PIN_NO(port, line) (((port) - 'A') * 0x10 + (line))
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_POWER_SUN55I_A523_PCK600_H_
+#define _DT_BINDINGS_POWER_SUN55I_A523_PCK600_H_
+
+#define PD_VE 0
+#define PD_GPU 1
+#define PD_VI 2
+#define PD_VO0 3
+#define PD_VO1 4
+#define PD_DE 5
+#define PD_NAND 6
+#define PD_PCIE 7
+
+#endif /* _DT_BINDINGS_POWER_SUN55I_A523_PCK600_H_ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_POWER_SUN55I_A523_PPU_H_
+#define _DT_BINDINGS_POWER_SUN55I_A523_PPU_H_
+
+#define PD_DSP 0
+#define PD_NPU 1
+#define PD_AUDIO 2
+#define PD_SRAM 3
+#define PD_RISCV 4
+
+#endif /* _DT_BINDINGS_POWER_SUN55I_A523_PPU_H_ */
#define RPMH_REGULATOR_LEVEL_TURBO_L2 432
#define RPMH_REGULATOR_LEVEL_TURBO_L3 448
#define RPMH_REGULATOR_LEVEL_TURBO_L4 452
+#define RPMH_REGULATOR_LEVEL_TURBO_L5 456
#define RPMH_REGULATOR_LEVEL_SUPER_TURBO 464
#define RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR 480
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#ifndef __DT_BINDINGS_POWER_RK3528_POWER_H__
+#define __DT_BINDINGS_POWER_RK3528_POWER_H__
+
+#define RK3528_PD_PMU 0
+#define RK3528_PD_BUS 1
+#define RK3528_PD_DDR 2
+#define RK3528_PD_MSCH 3
+
+/* VD_GPU */
+#define RK3528_PD_GPU 4
+
+/* VD_LOGIC */
+#define RK3528_PD_RKVDEC 5
+#define RK3528_PD_RKVENC 6
+#define RK3528_PD_VO 7
+#define RK3528_PD_VPU 8
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Device Tree binding constants for the NXP PCA9450A/B/C PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATORS_NXP_PCA9450_H
+#define _DT_BINDINGS_REGULATORS_NXP_PCA9450_H
+
+/*
+ * Buck mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define PCA9450_BUCK_MODE_AUTO 0
+#define PCA9450_BUCK_MODE_FORCE_PWM 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2025, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef __DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H
+#define __DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H
+
+/* SCMI voltage domain identifiers */
+
+/* SOC Internal regulators */
+#define VOLTD_SCMI_REG11 0
+#define VOLTD_SCMI_REG18 1
+#define VOLTD_SCMI_USB33 2
+
+/* STPMIC1 regulators */
+#define VOLTD_SCMI_STPMIC1_BUCK1 3
+#define VOLTD_SCMI_STPMIC1_BUCK2 4
+#define VOLTD_SCMI_STPMIC1_BUCK3 5
+#define VOLTD_SCMI_STPMIC1_BUCK4 6
+#define VOLTD_SCMI_STPMIC1_LDO1 7
+#define VOLTD_SCMI_STPMIC1_LDO2 8
+#define VOLTD_SCMI_STPMIC1_LDO3 9
+#define VOLTD_SCMI_STPMIC1_LDO4 10
+#define VOLTD_SCMI_STPMIC1_LDO5 11
+#define VOLTD_SCMI_STPMIC1_LDO6 12
+#define VOLTD_SCMI_STPMIC1_VREFDDR 13
+#define VOLTD_SCMI_STPMIC1_BOOST 14
+#define VOLTD_SCMI_STPMIC1_PWR_SW1 15
+#define VOLTD_SCMI_STPMIC1_PWR_SW2 16
+#define VOLTD_SCMI_VREFBUF 17
+
+/* External regulators */
+#define VOLTD_SCMI_REGU0 18
+#define VOLTD_SCMI_REGU1 19
+#define VOLTD_SCMI_REGU2 20
+#define VOLTD_SCMI_REGU3 21
+#define VOLTD_SCMI_REGU4 22
+
+#endif /*__DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023-2024 Canaan Bright Sight Co., Ltd
+ * Copyright (C) 2024-2025 Junhui Liu <junhui.liu@pigmoral.tech>
+ */
+#ifndef _DT_BINDINGS_CANAAN_K230_RST_H_
+#define _DT_BINDINGS_CANAAN_K230_RST_H_
+
+#define RST_CPU0 0
+#define RST_CPU1 1
+#define RST_CPU0_FLUSH 2
+#define RST_CPU1_FLUSH 3
+#define RST_AI 4
+#define RST_VPU 5
+#define RST_HISYS 6
+#define RST_HISYS_AHB 7
+#define RST_SDIO0 8
+#define RST_SDIO1 9
+#define RST_SDIO_AXI 10
+#define RST_USB0 11
+#define RST_USB1 12
+#define RST_USB0_AHB 13
+#define RST_USB1_AHB 14
+#define RST_SPI0 15
+#define RST_SPI1 16
+#define RST_SPI2 17
+#define RST_SEC 18
+#define RST_PDMA 19
+#define RST_SDMA 20
+#define RST_DECOMPRESS 21
+#define RST_SRAM 22
+#define RST_SHRM_AXIM 23
+#define RST_SHRM_AXIS 24
+#define RST_NONAI2D 25
+#define RST_MCTL 26
+#define RST_ISP 27
+#define RST_ISP_DW 28
+#define RST_DPU 29
+#define RST_DISP 30
+#define RST_GPU 31
+#define RST_AUDIO 32
+#define RST_TIMER0 33
+#define RST_TIMER1 34
+#define RST_TIMER2 35
+#define RST_TIMER3 36
+#define RST_TIMER4 37
+#define RST_TIMER5 38
+#define RST_TIMER_APB 39
+#define RST_HDI 40
+#define RST_WDT0 41
+#define RST_WDT1 42
+#define RST_WDT0_APB 43
+#define RST_WDT1_APB 44
+#define RST_TS_APB 45
+#define RST_MAILBOX 46
+#define RST_STC 47
+#define RST_PMU 48
+#define RST_LOSYS_APB 49
+#define RST_UART0 50
+#define RST_UART1 51
+#define RST_UART2 52
+#define RST_UART3 53
+#define RST_UART4 54
+#define RST_I2C0 55
+#define RST_I2C1 56
+#define RST_I2C2 57
+#define RST_I2C3 58
+#define RST_I2C4 59
+#define RST_JAMLINK0_APB 60
+#define RST_JAMLINK1_APB 61
+#define RST_JAMLINK2_APB 62
+#define RST_JAMLINK3_APB 63
+#define RST_CODEC_APB 64
+#define RST_GPIO_DB 65
+#define RST_GPIO_APB 66
+#define RST_ADC 67
+#define RST_ADC_APB 68
+#define RST_PWM_APB 69
+#define RST_SHRM_APB 70
+#define RST_CSI0 71
+#define RST_CSI1 72
+#define RST_CSI2 73
+#define RST_CSI_DPHY 74
+#define RST_ISP_AHB 75
+#define RST_M0 76
+#define RST_M1 77
+#define RST_M2 78
+#define RST_SPI2AXI 79
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Copyright (c) 2022-2025, NVIDIA CORPORATION. All rights reserved. */
+
+#ifndef DT_BINDINGS_RESET_NVIDIA_TEGRA264_H
+#define DT_BINDINGS_RESET_NVIDIA_TEGRA264_H
+
+#define TEGRA264_RESET_APE_TKE 1
+#define TEGRA264_RESET_CEC 2
+#define TEGRA264_RESET_ADSP_ALL 3
+#define TEGRA264_RESET_RCE_ALL 4
+#define TEGRA264_RESET_UFSHC 5
+#define TEGRA264_RESET_UFSHC_AXI_M 6
+#define TEGRA264_RESET_UFSHC_LP_SEQ 7
+#define TEGRA264_RESET_DPAUX 8
+#define TEGRA264_RESET_EQOS_PCS 9
+#define TEGRA264_RESET_HWPM 10
+#define TEGRA264_RESET_I2C1 11
+#define TEGRA264_RESET_I2C2 12
+#define TEGRA264_RESET_I2C3 13
+#define TEGRA264_RESET_I2C4 14
+#define TEGRA264_RESET_I2C6 15
+#define TEGRA264_RESET_I2C7 16
+#define TEGRA264_RESET_I2C8 17
+#define TEGRA264_RESET_I2C9 18
+#define TEGRA264_RESET_ISP 19
+#define TEGRA264_RESET_LA 20
+#define TEGRA264_RESET_NVCSI 21
+#define TEGRA264_RESET_EQOS_MAC 22
+#define TEGRA264_RESET_PWM10 23
+#define TEGRA264_RESET_PWM2 24
+#define TEGRA264_RESET_PWM3 25
+#define TEGRA264_RESET_PWM4 26
+#define TEGRA264_RESET_PWM5 27
+#define TEGRA264_RESET_PWM9 28
+#define TEGRA264_RESET_QSPI0 29
+#define TEGRA264_RESET_HDA 30
+#define TEGRA264_RESET_HDACODEC 31
+#define TEGRA264_RESET_I2C0 32
+#define TEGRA264_RESET_I2C10 33
+#define TEGRA264_RESET_SDMMC1 34
+#define TEGRA264_RESET_MIPI_CAL 35
+#define TEGRA264_RESET_SPI1 36
+#define TEGRA264_RESET_SPI2 37
+#define TEGRA264_RESET_SPI3 38
+#define TEGRA264_RESET_SPI4 39
+#define TEGRA264_RESET_SPI5 40
+#define TEGRA264_RESET_SPI7 41
+#define TEGRA264_RESET_SPI8 42
+#define TEGRA264_RESET_SPI9 43
+#define TEGRA264_RESET_TACH0 44
+#define TEGRA264_RESET_TSEC 45
+#define TEGRA264_RESET_VI 46
+#define TEGRA264_RESET_VI1 47
+#define TEGRA264_RESET_PVA0_ALL 48
+#define TEGRA264_RESET_VIC 49
+#define TEGRA264_RESET_MPHY_CLK_CTL 50
+#define TEGRA264_RESET_MPHY_L0_RX 51
+#define TEGRA264_RESET_MPHY_L0_TX 52
+#define TEGRA264_RESET_MPHY_L1_RX 53
+#define TEGRA264_RESET_MPHY_L1_TX 54
+#define TEGRA264_RESET_ISP1 55
+#define TEGRA264_RESET_I2C11 56
+#define TEGRA264_RESET_I2C12 57
+#define TEGRA264_RESET_I2C14 58
+#define TEGRA264_RESET_I2C15 59
+#define TEGRA264_RESET_I2C16 60
+#define TEGRA264_RESET_EQOS_MACSEC 61
+#define TEGRA264_RESET_MGBE0_PCS 62
+#define TEGRA264_RESET_MGBE0_MAC 63
+#define TEGRA264_RESET_MGBE0_MACSEC 64
+#define TEGRA264_RESET_MGBE1_PCS 65
+#define TEGRA264_RESET_MGBE1_MAC 66
+#define TEGRA264_RESET_MGBE1_MACSEC 67
+#define TEGRA264_RESET_MGBE2_PCS 68
+#define TEGRA264_RESET_MGBE2_MAC 69
+#define TEGRA264_RESET_MGBE2_MACSEC 70
+#define TEGRA264_RESET_MGBE3_PCS 71
+#define TEGRA264_RESET_MGBE3_MAC 72
+#define TEGRA264_RESET_MGBE3_MACSEC 73
+#define TEGRA264_RESET_ADSP_CORE0 74
+#define TEGRA264_RESET_ADSP_CORE1 75
+#define TEGRA264_RESET_APE 76
+#define TEGRA264_RESET_XUSB1_PADCTL 77
+#define TEGRA264_RESET_AON_CPU_ALL 78
+#define TEGRA264_RESET_AON_HSP 79
+#define TEGRA264_RESET_UART4 80
+#define TEGRA264_RESET_UART5 81
+#define TEGRA264_RESET_UART9 82
+#define TEGRA264_RESET_UART10 83
+#define TEGRA264_RESET_UART8 84
+
+#endif /* DT_BINDINGS_RESET_NVIDIA_TEGRA264_H */
#define RST_BUS_R_IR_RX 12
#define RST_BUS_R_RTC 13
#define RST_BUS_R_CPUCFG 14
+#define RST_BUS_R_PPU0 15
#endif /* _DT_BINDINGS_RST_SUN55I_A523_R_CCU_H_ */
&usbphy {
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
- usb0_vbus-supply = <®_usb0_vbus>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
&ehci0 {
- status = "okay";
+ status = "okay";
};
&mmc1 {
};
/omit-if-no-ref/
- uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+ uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
pins = "PI16", "PI17";
function = "uart2";
};
function = "i2s";
};
+ /omit-if-no-ref/
+ lcd_rgb666_pd_pins: lcd-rgb666-pd-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+ "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+ "PD18", "PD19", "PD20", "PD21";
+ function = "lcd";
+ };
+
uart1_pg_pins: uart1-pg-pins {
pins = "PG6", "PG7";
function = "uart1";
clk_can0: clock-can0 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <40000000>;
+ clock-frequency = <40000000>;
};
gpio-keys {
function = "i2c1";
};
+ /omit-if-no-ref/
+ lcd_rgb666_pe_pins: lcd-rgb666-pe-pins {
+ pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10", "PE11",
+ "PE12", "PE13", "PE14", "PE15", "PE16", "PE17",
+ "PE18", "PE19", "PE23", "PE24";
+ function = "lcd";
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
line-name = "ocp-aux-pwren";
};
- bmc-ready {
+ bmc-ready-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
output-high;
};
&gpio {
- pin_gpio_c7 {
+ pin-gpio-c7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "BIOS_SPI_MUX_S";
};
- pin_gpio_d1 {
+ pin-gpio-d1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
output-high;
"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
- bmc-ready {
+ bmc-ready-hog {
gpio-hog;
gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
output-high;
};
&gpio {
- pin_gpio_i3 {
+ pin-gpio-i3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "NCSI_BMC_R_SEL";
};
- pin_gpio_b6 {
+ pin-gpio-b6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
output-low;
* back to one causes a power output glitch, so install a hog to keep
* it at one as a failsafe to ensure nothing accidentally touches it.
*/
- doom-guardrail {
+ doom-guardrail-hog {
gpio-hog;
gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
output-low;
};
};
- switchphy: ethernet-phy@0 {
- // Fixed link
- };
-
front_gpio_leds {
compatible = "gpio-leds";
sys_log_id {
&mac2 {
status = "okay";
phy-mode = "rgmii";
- phy-handle = <&switchphy>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii3_default>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "source";
- data-role = "host";
- pd-disable;
- typec-power-opmode = "default";
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+ power-role = "dual";
+ try-power-role = "sink";
+ data-role = "dual";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <10000000>;
};
};
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "source";
- data-role = "host";
- pd-disable;
- typec-power-opmode = "default";
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+ power-role = "dual";
+ try-power-role = "sink";
+ data-role = "dual";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <10000000>;
};
};
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "source";
- data-role = "host";
- pd-disable;
- typec-power-opmode = "default";
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+ power-role = "dual";
+ try-power-role = "sink";
+ data-role = "dual";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <10000000>;
};
};
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "source";
- data-role = "host";
- pd-disable;
- typec-power-opmode = "default";
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+ power-role = "dual";
+ try-power-role = "sink";
+ data-role = "dual";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <10000000>;
};
};
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "source";
- data-role = "host";
- pd-disable;
- typec-power-opmode = "default";
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+ power-role = "dual";
+ try-power-role = "sink";
+ data-role = "dual";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <10000000>;
};
};
connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "source";
- data-role = "host";
- pd-disable;
- typec-power-opmode = "default";
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+ power-role = "dual";
+ try-power-role = "sink";
+ data-role = "dual";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <10000000>;
};
};
&i2c0 {
status = "okay";
+ multi-master;
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
i2c-mux@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
- i2c-mux-idle-disconnect;
i2c0mux0ch0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ mctp-controller;
+
+ // IOB0 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
};
i2c0mux0ch1: i2c@1 {
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+ mctp-controller;
+
+ // IOB0 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
};
i2c0mux0ch3: i2c@3 {
#address-cells = <1>;
reg = <0x75>;
#address-cells = <1>;
#size-cells = <0>;
- i2c-mux-idle-disconnect;
i2c0mux3ch0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+ mctp-controller;
+
+ // IOB1 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
};
i2c0mux3ch1: i2c@1 {
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+ mctp-controller;
+
+ // IOB1 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
};
i2c0mux3ch3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
- power-sensor@41 {
- compatible = "ti,ina238";
- reg = <0x41>;
- shunt-resistor = <500>;
- };
- power-sensor@42 {
- compatible = "ti,ina238";
- reg = <0x42>;
- shunt-resistor = <500>;
- };
- power-sensor@44 {
- compatible = "ti,ina238";
- reg = <0x44>;
- shunt-resistor = <500>;
+ power-sensor@22 {
+ compatible = "mps,mp5990";
+ reg = <0x22>;
};
};
i2c1mux0ch1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
-
- power-sensor@41 {
- compatible = "ti,ina238";
- reg = <0x41>;
- };
- power-sensor@43 {
- compatible = "ti,ina238";
- reg = <0x43>;
- };
};
i2c1mux0ch2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
+
+ fanctl2: fan-controller@1 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x01>;
+ #pwm-cells = <2>;
+
+ fan-9 {
+ pwms = <&fanctl2 0 40000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+ fan-11 {
+ pwms = <&fanctl2 0 40000>;
+ tach-ch = /bits/ 8 <0x0b>;
+ };
+ fan-10 {
+ pwms = <&fanctl2 4 40000>;
+ tach-ch = /bits/ 8 <0x0a>;
+ };
+ fan-13 {
+ pwms = <&fanctl2 4 40000>;
+ tach-ch = /bits/ 8 <0x0d>;
+ };
+ fan-15 {
+ pwms = <&fanctl2 6 40000>;
+ tach-ch = /bits/ 8 <0x0f>;
+ };
+ fan-1 {
+ pwms = <&fanctl2 6 40000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+ fan-0 {
+ pwms = <&fanctl2 10 40000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+ fan-3 {
+ pwms = <&fanctl2 10 40000>;
+ tach-ch = /bits/ 8 <0x03>;
+ };
+ };
+ fanctl3: fan-controller@2 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x02>;
+ #pwm-cells = <2>;
+
+ fan-9 {
+ pwms = <&fanctl3 0 40000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+ fan-11 {
+ pwms = <&fanctl3 0 40000>;
+ tach-ch = /bits/ 8 <0x0b>;
+ };
+ fan-10 {
+ pwms = <&fanctl3 4 40000>;
+ tach-ch = /bits/ 8 <0x0a>;
+ };
+ fan-13 {
+ pwms = <&fanctl3 4 40000>;
+ tach-ch = /bits/ 8 <0x0d>;
+ };
+ fan-15 {
+ pwms = <&fanctl3 6 40000>;
+ tach-ch = /bits/ 8 <0x0f>;
+ };
+ fan-1 {
+ pwms = <&fanctl3 6 40000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+ fan-0 {
+ pwms = <&fanctl3 10 40000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+ fan-3 {
+ pwms = <&fanctl3 10 40000>;
+ tach-ch = /bits/ 8 <0x03>;
+ };
+ };
+ fanctl0: fan-controller@21{
+ compatible = "maxim,max31790";
+ reg = <0x21>;
+ };
+ fanctl1: fan-controller@27{
+ compatible = "maxim,max31790";
+ reg = <0x27>;
+ };
};
i2c1mux0ch3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
+ power-monitor@13 {
+ compatible = "infineon,xdp710";
+ reg = <0x13>;
+ };
+ power-monitor@1c {
+ compatible = "infineon,xdp710";
+ reg = <0x1c>;
+ };
power-monitor@42 {
compatible = "lltc,ltc4287";
reg = <0x42>;
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ // FIO REMOTE TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
};
};
};
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
-
- power-sensor@40 {
- compatible = "ti,ina230";
- reg = <0x40>;
- shunt-resistor = <2000>;
- };
- power-sensor@41 {
- compatible = "ti,ina230";
- reg = <0x41>;
- shunt-resistor = <2000>;
- };
- power-sensor@44 {
- compatible = "ti,ina230";
- reg = <0x44>;
- shunt-resistor = <2000>;
- };
- power-sensor@45 {
- compatible = "ti,ina230";
- reg = <0x45>;
- shunt-resistor = <2000>;
- };
};
};
};
&i2c10 {
status = "okay";
+ multi-master;
+ mctp-controller;
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
// OCP NIC0 TEMP
temperature-sensor@1f {
&i2c12 {
status = "okay";
+ multi-master;
// Module 1 FRU EEPROM
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ // Secondary CBC FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
};
&i2c13 {
status = "okay";
+ multi-master;
// Module 0 FRU EEPROM
eeprom@50 {
reg = <0x50>;
};
- // Left CBC FRU EEPROM
+ // Primary CBC FRU EEPROM
eeprom@54 {
compatible = "atmel,24c02";
reg = <0x54>;
};
- // Right CBC FRU EEPROM
- eeprom@55 {
- compatible = "atmel,24c02";
- reg = <0x55>;
- };
-
// HMC FRU EEPROM
eeprom@57 {
compatible = "atmel,24c02";
&i2c15 {
status = "okay";
+ multi-master;
+ mctp-controller;
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
// OCP NIC1 TEMP
temperature-sensor@1f {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","fcb1-activate",
+ "","";
+ };
};
&i2c1 {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ gpio@12 {
+ compatible = "nxp,pca9555";
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","fcb0-activate",
+ "","";
+ };
};
&i2c3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
+ power-monitor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ };
+
};
imux23: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ power-monitor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ };
};
};
};
&i2c11 {
status = "okay";
+ gpio@13 {
+ compatible = "nxp,pca9555";
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <222 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-line-names =
+ "","",
+ "","",
+ "","",
+ "","health-mmc",
+ "","",
+ "","",
+ "","",
+ "","";
+ };
+
gpio@30 {
compatible = "nxp,pca9555";
reg = <0x30>;
compatible = "atmel,24c64";
reg = <0x54>;
};
+
+ adc@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ adc@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
};
imux30: i2c@2 {
#address-cells = <1>;
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","led-identify-gate","",
/*V0-V7*/ "","","","",
- "rtc-battery-voltage-read-enable","",
+ "","",
"","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
"presence-cmm","ac-control-n",
/*G0-G3 line 96-103*/
"FM_CPU_CORETYPE2","",
- "FM_CPU_CORETYPE1","",
+ "FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable",
"FM_CPU_CORETYPE0","",
"FM_BOARD_REV_ID5","",
/*G4-G7 line 104-111*/
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Santabarbara BMC";
+ compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c4mux0ch0;
+ i2c17 = &i2c4mux0ch1;
+ i2c18 = &i2c4mux0ch2;
+ i2c19 = &i2c4mux0ch3;
+ i2c20 = &i2c4mux0ch4;
+ i2c21 = &i2c4mux0ch5;
+ i2c22 = &i2c4mux0ch6;
+ i2c23 = &i2c4mux0ch7;
+ i2c24 = &i2c5mux0ch0;
+ i2c25 = &i2c5mux0ch1;
+ i2c26 = &i2c5mux0ch2;
+ i2c27 = &i2c5mux0ch3;
+ i2c28 = &i2c5mux1ch0;
+ i2c29 = &i2c5mux1ch1;
+ i2c30 = &i2c5mux1ch2;
+ i2c31 = &i2c5mux1ch3;
+ i2c32 = &i2c12mux0ch0;
+ i2c33 = &i2c12mux0ch1;
+ i2c34 = &i2c12mux0ch2;
+ i2c35 = &i2c12mux0ch3;
+ i2c36 = &i2c12mux0ch4;
+ i2c37 = &i2c12mux0ch5;
+ i2c38 = &i2c12mux0ch6;
+ i2c39 = &i2c12mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_bmc_aux";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ spi_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&adc0 {
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+ status = "okay";
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "rtc-battery-voltage-read-enable","","","BMC_READY",
+ "","led-identify","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "FM_MUX1_SEL_R","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "led-postcode-0","led-postcode-1",
+ "led-postcode-2","led-postcode-3",
+ "led-postcode-4","led-postcode-5",
+ "led-postcode-6","led-postcode-7",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "power-button","","reset-button","",
+ "led-power","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","power-host-control","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B7*/ "","","","",
+ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+ "FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&i2c0 {
+ status = "okay";
+
+ // MB FRU
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+ "FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+ "FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+ "FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+ "CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+ "FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+ "FM_CPU0_SP7R4","",
+ "FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+ };
+
+ fan-controller@21{
+ compatible = "maxim,max31790";
+ reg = <0x21>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+ "FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+ "FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+ "CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+ "","",
+ "CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+ "FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+ "E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+ "FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+ "FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+ "FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+ "OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+ "FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+ "FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+ "FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+ };
+
+ gpio@26 {
+ compatible = "nxp,pca9555";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+ "FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+ "P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+ "P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+ "P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+ "P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+ "","","","";
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ // HPM Board ID EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ // SCM Board ID EEPROM
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+ };
+ i2c4mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c4mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c4mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@42 {
+ compatible = "ti,ina230";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@46 {
+ compatible = "ti,ina230";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+
+ voltage-sensor@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ vref-supply = <&p3v3_bmc_aux>;
+ };
+
+ voltage-sensor@4a {
+ compatible = "ti,ads7830";
+ reg = <0x4a>;
+ vref-supply = <&p3v3_bmc_aux>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+ };
+ i2c4mux0ch4: i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c4mux0ch5: i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c4mux0ch6: i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@42 {
+ compatible = "ti,ina230";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@46 {
+ compatible = "ti,ina230";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+
+ voltage-sensor@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+ };
+ i2c4mux0ch7: i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ // FIO FRU
+ eeprom@53 {
+ compatible = "atmel,24c512";
+ reg = <0x53>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ // E1S BP FRU
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c5mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c5mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c5mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux1ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+ };
+ i2c5mux1ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+ };
+ i2c5mux1ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+ };
+ i2c5mux1ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+ "E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+ "E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+ "E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+ "P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+ "P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+ "P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+ "P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ // Rainbow0 FRU
+ eeprom@52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ // Rainbow2 FRU
+ eeprom@52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ // BSM FRU
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // Rainbow3 FRU
+ eeprom@52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ // OCP NIC TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC FRU
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ // SWB FRU
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9548";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c12mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+ };
+ i2c12mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@42 {
+ compatible = "mps,mp2971";
+ reg = <0x42>;
+ };
+
+ power-monitor@43 {
+ compatible = "mps,mp2971";
+ reg = <0x43>;
+ };
+ };
+ i2c12mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+ };
+ i2c12mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+ };
+ i2c12mux0ch4: i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ voltage-sensor@49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+ };
+ i2c12mux0ch5: i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c12mux0ch6: i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c12mux0ch7: i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ // Rainbow1 FRU
+ eeprom@52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&kcs2 {
+ aspeed,lpc-io-reg = <0xca8>;
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&mac2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ use-ncsi;
+ status = "okay";
+};
+
+&mac3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ use-ncsi;
+ status = "okay";
+};
+
+&sgpiom0 {
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+ gpio-line-names =
+ /*in - out - in - out */
+ /*A0-A3 line 0-7*/
+ "PDB1_HSC_PWR_OK","power-chassis-control",
+ "PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+ "PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+ "PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+ /*A4-A7 line 8-15*/
+ "PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+ "PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+ "power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+ "PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+ /*B0-B3 line 16-23*/
+ "PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+ "PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+ "PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+ "CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+ /*B4-B7 line 24-31*/
+ "PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+ "CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+ "FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+ "FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+ /*C0-C3 line 32-39*/
+ "FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+ "FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+ "FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+ "PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+ /*C4-C7 line 40-47*/
+ "PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+ "PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+ "PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+ "FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+ /*D0-D3 line 48-55*/
+ "host0-ready","P12V_FAN7_PWRGD_OUT",
+ "FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+ "FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+ "RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+ /*D4-D7 line 56-63*/
+ "RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+ "BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+ "","FAN_5_PRSNT_R1_N_OUT",
+ "","FAN_6_PRSNT_R1_N_OUT",
+ /*E0-E3 line 64-71*/
+ "FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+ "FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+ "FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+ "FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+ /*E4-E7 line 72-79*/
+ "P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+ "P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+ "P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+ "P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+ /*F0-F3 line 80-87*/
+ "FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+ "OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+ "P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+ "PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+ /*F4-F7 line 88-95*/
+ "","CLR_CMOS",
+ "","I3C_SPD_MUX_FORCE_SEL",
+ "","FM_JTAG_HOST_SEL",
+ "","TRAY_PRESENT_N",
+ /*G0-G3 line 96-103*/
+ "MB_REV_ID_0","UART_BMC_SEL0",
+ "MB_REV_ID_1","UART_BMC_SEL1",
+ "MB_REV_ID_2","SCM_USB_SEL",
+ "MB_SKU_ID_0","FORCE_ALL_PWRON",
+ /*G4-G7 line 104-111*/
+ "MB_SKU_ID_1","PASSWORD_CLEAR",
+ "MB_SKU_ID_2","",
+ "MB_SKU_ID_3","",
+ "","BIOS_DEBUG_MODE",
+ /*H0-H3 line 112-119*/
+ "FM_IOEXP_U538_INT_N","",
+ "FM_IOEXP_U539_INT_N","",
+ "FM_IOEXP_U540_INT_N","",
+ "FM_IOEXP_U541_INT_N","",
+ /*H4-H7 line 120-127*/
+ "FM_IOEXP_PDB2_U1003_INT_N","",
+ "","","","","","",
+ /*I0-I3 line 128-135*/
+ "","","","",
+ "PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+ "PDB_UV_ALERT_ISO_R_N","",
+ /*I4-I7 line 136-143*/
+ "P12V_SCM_ADC_ALERT","",
+ "CPU0_REGS_I2C_ALERT_N","",
+ "FM_RTC_ALERT_N","",
+ "APML_CPU0_ALERT_R_N","",
+ /*J0-J3 line 144-151*/
+ "SMB_RJ45_FIO_TMP_ALERT","",
+ "FM_SMB_ALERT_MCIO_0A_N","",
+ "I3C_MCIO_0B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_1A_N","",
+ /*J4-J7 line 152-159*/
+ "I3C_MCIO_1B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_2A_N","",
+ "I3C_MCIO_2B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_3A_N","",
+ /*K0-K3 line 160-167*/
+ "I3C_MCIO_3B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_4A_N","",
+ "I3C_MCIO_4B_ALERT_ISO_R_N","",
+ "","",
+ /*K4-K7 line 168-175*/
+ "","","","","","","","",
+ /*L0-L3 line 176-183*/
+ "FM_CPU0_THERMTRIP_N","",
+ "FM_CPU0_PROCHOT_N","",
+ "FM_CPU0_SMERR_N","",
+ "FM_PVDDCR_CPU0_P0_OCP_N","",
+ /*L4-L7 line 184-191*/
+ "FM_PVDDCR_CPU1_P0_OCP_N","",
+ "FM_PVDDCR_SOC_P0_OCP_N","",
+ "FM_OCP_PWRBRK_R_N","",
+ "PMIC_ERROR_N","",
+ /*M0-M3 line 192-199*/
+ "","","","","","","","",
+ /*M4-M7 line 200-207*/
+ "","","","","","","","",
+ /*N0-N3 line 208-215*/
+ "FM_PRSNT_CPU0_N","",
+ "OCP_SFF_PRSNT_N","",
+ "E1S_0_PRSNT_R_N","",
+ "E1S_BP_0_PRSNT_R_N","",
+ /*N4-N7 line 216-223*/
+ "E1S_BP_1_PRSNT_R_N","",
+ "E1S_BP_2_PRSNT_R_N","",
+ "E1S_BP_3_PRSNT_R_N","",
+ "PDB_PRSNT_J311_N","",
+ /*O0-O3 line 224-231*/
+ "PDB_PRSNT_J312_N","",
+ "PDB_PRSNT_J313_N","",
+ "PDB_PRSNT_J314_N","",
+ "PRSNT_RJ45_FIO_N_R","",
+ /*O4-O7 line 232-239*/
+ "PRSNT_LEAK_CABLE_1_R_N","",
+ "PRSNT_LEAK_CABLE_2_R_N","",
+ "PRSNT_HDT_N","",
+ "","",
+ /*P0-P3 line 240-247*/
+ "","","","","","","","",
+ /*P4-P7 line 248-255*/
+ "","","","","","","","";
+ status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+ status = "okay";
+
+ flash@0 {
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <12000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ status = "okay";
+ };
+};
+
+// HOST BIOS Debug
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&wdt1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+ status = "okay";
+};
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+ "SLOT1_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+ "SLOT2_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+ "SLOT3_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+ "SLOT4_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+ "SLOT5_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+ "SLOT6_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+ "SLOT7_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+ "SLOT8_UART_SEL2","","","","","",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
};
gpio@23 {
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","";
- usb_power {
+ usb-power-hog {
gpio-hog;
gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
output-high;
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","";
- usb_power {
+ usb-power-hog {
gpio-hog;
gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
output-high;
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","";
- i2c3_mux_oe_n {
+ i2c3-mux-oe-n-hog {
gpio-hog;
gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
output-high;
line-name = "I2C3_MUX_OE_N";
};
- usb_power {
+ usb-power-hog {
gpio-hog;
gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
output-high;
leds {
compatible = "gpio-leds";
- led-0 {
+ led-bmc-ready {
gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
};
- led-1 {
+ led-bmc-hb {
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
};
- led-2 {
+ led-rear-enc-fault0 {
gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
};
- led-3 {
+ led-rear-enc-id0 {
gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
};
- led-4 {
+ led-fan0-fault {
gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
};
- led-5 {
+ led-fan1-fault {
gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
};
- led-6 {
+ led-fan2-fault {
gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
};
- led-7 {
+ led-fan3-fault {
gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
};
- led-8 {
+ led-fan4-fault {
gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
};
- led-9 {
+ led-fan5-fault {
gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
};
- led-a {
+ led-fan6-fault {
gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
};
- led-b {
+ led-nvmed0-fault {
gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
};
- led-c {
+ led-nvmed1-fault {
gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
};
- led-d {
+ led-nvmed2-fault {
gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
};
- led-e {
+ led-nvmed3-fault {
gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
};
};
status = "okay";
};
+&pinctrl {
+ pinctrl_gpiol4_unbiased: gpiol4 {
+ pins = "C15";
+ bias-disable;
+ };
+
+ pinctrl_gpiol5_unbiased: gpiol5 {
+ pins = "F15";
+ bias-disable;
+ };
+
+ pinctrl_gpiol6_unbiased: gpiol6 {
+ pins = "B14";
+ bias-disable;
+ };
+
+ pinctrl_gpiol7_unbiased: gpiol7 {
+ pins = "C14";
+ bias-disable;
+ };
+};
+
&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiol4_unbiased
+ &pinctrl_gpiol5_unbiased
+ &pinctrl_gpiol6_unbiased
+ &pinctrl_gpiol7_unbiased>;
+
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
/*B0-B7*/ "","","","","bmc-tpm-reset","","","",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
- /*L0-L7*/ "","","","","","","","bmc-ready",
+ /*L0-L7*/ "","","","","","","","led-bmc-ready",
/*M0-M7*/ "","","","","","","","",
- /*N0-N7*/ "fpga-debug-enable","","","","","","","",
+ /*N0-N7*/ "pch-reset","","","","","flash-write-override","","",
/*O0-O7*/ "","","","","","","","",
- /*P0-P7*/ "","","","","","","","bmc-hb",
+ /*P0-P7*/ "","","","","","","","led-bmc-hb",
/*Q0-Q7*/ "","","","","","","pch-ready","",
/*R0-R7*/ "","","","","","","","",
- /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0",
+ /*S0-S7*/ "","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
/*X0-X7*/ "fpga-pgood","power-chassis-good","pch-pgood","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","";
+
+ pin-gpio-hog-0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "RST_RTCRST_N";
+ };
+
+ pin-gpio-hog-1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "RST_SRTCRST_N";
+ };
+
+ pin-gpio-hog-2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
+ };
+
+ pin-gpio-hog-3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "isolate_errs_cpu1";
+ };
};
&emmc_controller {
&sgpiom0 {
status = "okay";
ngpios = <128>;
- bus-frequency = <1000000>;
+ bus-frequency = <500000>;
};
&ibt {
compatible = "atmel,24c64";
reg = <0x50>;
};
-
- regulator@60 {
- compatible = "maxim,max8952";
- reg = <0x60>;
-
- max8952,default-mode = <0>;
- max8952,dvs-mode-microvolt = <1250000>, <1200000>,
- <1050000>, <950000>;
- max8952,sync-freq = <0>;
- max8952,ramp-speed = <0>;
-
- regulator-name = "VR_v77_1v4";
- regulator-min-microvolt = <770000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
};
&i2c1 {
&i2c4 {
status = "okay";
+ multi-master;
+ bus-frequency = <1000000>;
+
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+ i2c-protocol;
+ };
};
&i2c5 {
compatible = "atmel,24c64";
reg = <0x50>;
};
-
- regulator@60 {
- compatible = "maxim,max8952";
- reg = <0x60>;
-
- max8952,default-mode = <0>;
- max8952,dvs-mode-microvolt = <1250000>, <1200000>,
- <1050000>, <950000>;
- max8952,sync-freq = <0>;
- max8952,ramp-speed = <0>;
-
- regulator-name = "VR_v77_1v4";
- regulator-min-microvolt = <770000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
};
&i2c11 {
&gpio {
- pin_gpio_b5 {
+ pin-gpio-b5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "IRQ_BMC_PCH_SMI_LPC_N";
};
- pin_gpio_f0 {
+ pin-gpio-f0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "IRQ_BMC_PCH_NMI_R";
};
- pin_gpio_f3 {
+ pin-gpio-f3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "I2C_BUS0_RST_OUT_N";
};
- pin_gpio_f4 {
+ pin-gpio-f4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "FM_SKT0_FAULT_LED";
};
- pin_gpio_f5 {
+ pin-gpio-f5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "FM_SKT1_FAULT_LED";
};
- pin_gpio_g4 {
+ pin-gpio-g4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FAN_PWR_CTL_N";
};
- pin_gpio_g7 {
+ pin-gpio-g7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "RST_BMC_PCIE_I2CMUX_N";
};
- pin_gpio_h2 {
+ pin-gpio-h2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PSU1_FFS_N_R";
};
- pin_gpio_h3 {
+ pin-gpio-h3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PSU2_FFS_N_R";
};
- pin_gpio_i3 {
+ pin-gpio-i3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_INTRUDED_COVER";
};
- pin_gpio_j2 {
+ pin-gpio-j2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_BIOS_UPDATE_N";
};
- pin_gpio_j3 {
+ pin-gpio-j3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "RST_BMC_HDD_I2CMUX_N";
};
- pin_gpio_s2 {
+ pin-gpio-s2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_VGA_SW";
};
- pin_gpio_s4 {
+ pin-gpio-s4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
output;
line-name = "VBAT_EN_N";
};
- pin_gpio_s6 {
+ pin-gpio-s6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PU_BMC_GPIOS6";
};
- pin_gpio_y0 {
+ pin-gpio-y0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "BMC_NCSI_MUX_CTL_S0";
};
- pin_gpio_y1 {
+ pin-gpio-y1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "BMC_NCSI_MUX_CTL_S1";
};
- pin_gpio_z0 {
+ pin-gpio-z0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "I2C_RISER2_INT_N";
};
- pin_gpio_z2 {
+ pin-gpio-z2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "I2C_RISER2_RESET_N";
};
- pin_gpio_z3 {
+ pin-gpio-z3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_PCH_SCI_LPC_N";
};
- pin_gpio_z7 {
+ pin-gpio-z7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "BMC_POST_CMPLT_N";
};
- pin_gpio_aa0 {
+ pin-gpio-aa0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "HOST_BMC_USB_SEL";
};
- pin_gpio_aa5 {
+ pin-gpio-aa5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
output-high;
&gpio {
- pin_gpio_a1 {
+ pin-gpio-a1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
output-high;
line-name = "BMC_EMMC_RST_N";
};
- pin_gpio_a3 {
+ pin-gpio-a3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
output-high;
line-name = "PCH_PWROK_BMC_FPGA";
};
- pin_gpio_b5 {
+ pin-gpio-b5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "IRQ_BMC_PCH_SMI_LPC_N";
};
- pin_gpio_b7 {
+ pin-gpio-b7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
output-low;
line-name = "CPU_SM_WP";
};
- pin_gpio_e0 {
+ pin-gpio-e0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
input;
line-name = "PDB_PSU_SEL";
};
- pin_gpio_e2 {
+ pin-gpio-e2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "LOCATOR_LED_N";
};
- pin_gpio_e5 {
+ pin-gpio-e5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_DBP_PRESENT_R1_N";
};
- pin_gpio_e6 {
+ pin-gpio-e6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_ME_SECURITY_OVERRIDE_N";
};
- pin_gpio_f0 {
+ pin-gpio-f0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "IRQ_BMC_PCH_NMI_R";
};
- pin_gpio_f1 {
+ pin-gpio-f1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
input;
line-name = "CPU2_PROCDIS_BMC_N";
};
- pin_gpio_f2 {
+ pin-gpio-f2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "RM_THROTTLE_EN_N";
};
- pin_gpio_f3 {
+ pin-gpio-f3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "FM_PMBUS_ALERT_B_EN";
};
- pin_gpio_f4 {
+ pin-gpio-f4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_FORCE_NM_THROTTLE_N";
};
- pin_gpio_f6 {
+ pin-gpio-f6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_CPU_PWR_DEBUG_N";
};
- pin_gpio_g7 {
+ pin-gpio-g7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_PCIE_I2C_MUX_RST_N";
};
- pin_gpio_h6 {
+ pin-gpio-h6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_DBP_PRESENT_R2_N";
};
- pin_gpio_i3 {
+ pin-gpio-i3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SPI_BMC_BIOS_WP_N";
};
- pin_gpio_j1 {
+ pin-gpio-j1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_USB_SEL";
};
- pin_gpio_j2 {
+ pin-gpio-j2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PDB_SMB_RST_N";
};
- pin_gpio_j3 {
+ pin-gpio-j3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SPI_BMC_BIOS_HOLD_N";
};
- pin_gpio_l0 {
+ pin-gpio-l0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PDB_FAN_TACH_SEL";
};
- pin_gpio_l1 {
+ pin-gpio-l1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SYS_RESET_BMC_FPGA_N";
};
- pin_gpio_l4 {
+ pin-gpio-l4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_EFUSE_FAN_G1_EN";
};
- pin_gpio_l5 {
+ pin-gpio-l5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_EFUSE_FAN_G2_EN";
};
- pin_gpio_r6 {
+ pin-gpio-r6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
input;
line-name = "CPU3_PROCDIS_BMC_N";
};
- pin_gpio_r7 {
+ pin-gpio-r7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
input;
line-name = "CPU4_PROCDIS_BMC_N";
};
- pin_gpio_s1 {
+ pin-gpio-s1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "DBP_SYSPWROK_BMC";
};
- pin_gpio_s2 {
+ pin-gpio-s2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PCH_RST_RSMRST_N";
};
- pin_gpio_s6 {
+ pin-gpio-s6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_HW_STRAP_5";
};
- pin_gpio_z3 {
+ pin-gpio-z3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_PCH_SCI_LPC_N";
};
- pin_gpio_aa0 {
+ pin-gpio-aa0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "FW_PSU_ALERT_EN_N";
};
- pin_gpio_aa4 {
+ pin-gpio-aa4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "DBP_CPU_PREQ_N";
};
- pin_gpio_ab3 {
+ pin-gpio-ab3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "BMC_WDTRST";
};
- pin_gpio_ac6 {
+ pin-gpio-ac6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
output-high;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "AST2600 GB200NVL BMC";
+ compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial2 = &uart3;
+ serial4 = &uart5;
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+ i2c40 = &e1si2c0;
+ i2c41 = &e1si2c1;
+ i2c42 = &e1si2c2;
+ i2c43 = &e1si2c3;
+ i2c44 = &e1si2c4;
+ i2c45 = &e1si2c5;
+ i2c46 = &e1si2c6;
+ i2c47 = &e1si2c7;
+ i2c48 = &i2c17mux0;
+ i2c49 = &i2c17mux1;
+ i2c50 = &i2c17mux2;
+ i2c51 = &i2c17mux3;
+ i2c52 = &i2c25mux0;
+ i2c53 = &i2c25mux1;
+ i2c54 = &i2c25mux2;
+ i2c55 = &i2c25mux3;
+ i2c56 = &i2c29mux0;
+ i2c57 = &i2c29mux1;
+ i2c58 = &i2c29mux2;
+ i2c59 = &i2c29mux3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ ramoops@a0000000 {
+ compatible = "ramoops";
+ reg = <0xa0000000 0x100000>; /* 1MB */
+ record-size = <0x10000>; /* 64KB */
+ max-reason = <2>; /* KMSG_DUMP_OOPS */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ label = "uid_led";
+ gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+ };
+ led-1 {
+ label = "fault_led";
+ gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+ };
+ led-2 {
+ label = "power_led";
+ gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ buttons {
+ button-power {
+ label = "power-btn";
+ gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+ };
+ button-uid {
+ label = "uid-btn";
+ gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ compatible = "jedec,spi-nor";
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot@0 {
+ // 896KB
+ reg = <0x0 0xe0000>;
+ label = "u-boot";
+ };
+
+ kernel@100000 {
+ // 9MB
+ reg = <0x100000 0x900000>;
+ label = "kernel";
+ };
+
+ rofs@a00000 {
+ // 55292KB (extends to end of 64MB SPI - 4KB)
+ reg = <0xa00000 0x35FF000>;
+ label = "rofs";
+ };
+ };
+ };
+};
+
+&spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+
+ // Data SPI is 64MB in size
+ flash@0 {
+ status = "okay";
+ label = "config";
+ spi-max-frequency = <50000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot-env@0 {
+ // 256KB
+ reg = <0x0 0x40000>;
+ label = "u-boot-env";
+ };
+
+ rwfs@40000 {
+ // 16MB
+ reg = <0x40000 0x1000000>;
+ label = "rwfs";
+ };
+
+ log@1040000 {
+ // 40MB
+ reg = <0x1040000 0x2800000>;
+ label = "log";
+ };
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ // Enabling SOL
+ status = "okay";
+};
+
+&uart5 {
+ // BMC Debug Console
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&mac2 {
+ status = "okay";
+ phy-mode = "rmii";
+ use-ncsi;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+/*
+ * Enable USB port A as device (via the virtual hub) to host
+ */
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+// USB 2.0 to HMC, on USB Port B
+&ehci1 {
+ status = "okay";
+};
+
+// USB 1.0
+&uhci {
+ status = "okay";
+};
+
+&sgpiom0 {
+ status="okay";
+ ngpios = <128>;
+ gpio-line-names =
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+ "RUN_POWER_PG-I","PWR_BRAKE_L-O",
+ "SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+ "L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+ "L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+ "SHDN_OK_L-I","UID_LED_N-O",
+ "BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+ "BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+ "FPGA_RSVD_FFU3-I","",
+ "FPGA_RSVD_FFU2-I","",
+ "FPGA_RSVD_FFU1-I","",
+ "FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+ "CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+ "SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+ "THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+ "THERM_BB_OVERT_L-I","",
+ "CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+ "CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+ "CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+ "CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+ "CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+ "CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+ "CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+ "CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+ "CPU1_UPHY3_PRSNT1_L-I","",
+ "CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+ "CPU1_UPHY2_PRSNT1_L-I","",
+ "CPU1_UPHY2_PRSNT0_L-I","",
+ "CPU1_UPHY1_PRSNT1_L-I","",
+ "CPU1_UPHY1_PRSNT0_L-I","",
+ "CPU1_UPHY0_PRSNT1_L-I","",
+ "CPU1_UPHY0_PRSNT0_L-I","",
+ "FAN1_PRESENT_L-I","",
+ "FAN0_PRESENT_L-I","",
+ "","",
+ "IPEX_CABLE_PRSNT_L-I","",
+ "M2_1_PRSNT_L-I","",
+ "M2_0_PRSNT_L-I","",
+ "CPU1_UPHY4_PRSNT1_L-I","",
+ "CPU0_UPHY4_PRSNT0_L-I","",
+ "","",
+ "I2C_RTC_ALERT_L-I","",
+ "FAN7_PRESENT_L-I","",
+ "FAN6_PRESENT_L-I","",
+ "FAN5_PRESENT_L-I","",
+ "FAN4_PRESENT_L-I","",
+ "FAN3_PRESENT_L-I","",
+ "FAN2_PRESENT_L-I","",
+ "IOBRD0_IOX_INT_L-I","",
+ "IOBRD1_PRSNT_L-I","",
+ "IOBRD0_PRSNT_L-I","",
+ "IOBRD1_PWR_GOOD-I","",
+ "IOBRD0_PWR_GOOD-I","",
+ "","",
+ "","",
+ "FAN_FAIL_IN_L-I","",
+ "","",
+ "","",
+ "","",
+ "PDB_CABLE_PRESENT_L-I","",
+ "","",
+ "CHASSIS_PWR_BRK_L-I","",
+ "","",
+ "IOBRD1_IOX_INT_L-I","",
+ "10GBE_SMBALRT_L-I","",
+ "PCIE_WAKE_L-I","",
+ "I2C_M21_ALERT_L-I","",
+ "I2C_M20_ALERT_L-I","",
+ "TRAY_FAST_SHDN_L-I","",
+ "UID_BTN_N-I","",
+ "PWR_BTN_L-I","",
+ "PSU_SMB_ALERT_L-I","",
+ "","",
+ "","",
+ "NODE_LOC_ID[0]-I","",
+ "NODE_LOC_ID[1]-I","",
+ "NODE_LOC_ID[2]-I","",
+ "NODE_LOC_ID[3]-I","",
+ "NODE_LOC_ID[4]-I","",
+ "NODE_LOC_ID[5]-I","",
+ "FAN10_PRESENT_L-I","",
+ "FAN9_PRESENT_L-I","",
+ "FAN8_PRESENT_L-I","",
+ "FPGA1_READY_HMC-I","",
+ "DP_HPD-I","",
+ "HMC_I2C3_FPGA_ALERT_L-I","",
+ "HMC_I2C2_FPGA_ALERT_L-I","",
+ "FPGA0_READY_HMC-I","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "LEAK_DETECT_ALERT_L-I","",
+ "MOD1_B2B_CABLE_PRESENT_L-I","",
+ "MOD1_CLINK_CABLE_PRESENT_L-I","",
+ "FAN11_PRESENT_L-I","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "","",
+ "RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+ "RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+ "RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+ "RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+ "RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+ "RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+ "RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+ "RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+// I2C2
+// BMC_I2C1_FPGA - Secondary FPGA
+// HMC EROT
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ multi-master;
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+// HMC FRU EEPROM
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+ multi-master;
+};
+
+// I2C4
+&i2c3 {
+ status = "disabled";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ // Module 0, Expander @0x21
+ exp4: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "RTC_MUX_SEL-O",
+ "PCI_MUX_SEL-O",
+ "TPM_MUX_SEL-O",
+ "FAN_MUX-SEL-O",
+ "SGMII_MUX_SEL-O",
+ "DP_MUX_SEL-O",
+ "UPHY3_USB_SEL-O",
+ "NCSI_MUX_SEL-O",
+ "BMC_PHY_RST-O",
+ "RTC_CLR_L-O",
+ "BMC_12V_CTRL-O",
+ "PS_RUN_IO0_PG-I",
+ "",
+ "",
+ "",
+ "";
+ };
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+ multi-master;
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c-mux-idle-disconnect;
+
+ i2c17mux0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c17mux1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c17mux2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c17mux3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ imux20: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux21: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "RST_CX_0_L-O",
+ "RST_CX_1_L-O",
+ "CX0_SSD0_PRSNT_L-I",
+ "CX1_SSD1_PRSNT_L-I",
+ "CX_BOOT_CMPLT_CX0-I",
+ "CX_BOOT_CMPLT_CX1-I",
+ "CX_TWARN_CX0_L-I",
+ "CX_TWARN_CX1_L-I",
+ "CX_OVT_SHDN_CX0-I",
+ "CX_OVT_SHDN_CX1-I",
+ "FNP_L_CX0-O",
+ "FNP_L_CX1-O",
+ "",
+ "MCU_GPIO-I",
+ "MCU_RST_N-O",
+ "MCU_RECOVERY_N-O";
+ };
+ };
+
+ imux22: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux23: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x73>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c25mux0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c25mux1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c25mux2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c25mux3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ imux28: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux29: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c-mux-idle-disconnect;
+
+ i2c29mux0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c29mux1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c29mux2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c29mux3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ imux30: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux31: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "SEC_RST_CX_0_L-O",
+ "SEC_RST_CX_1_L-O",
+ "SEC_CX0_SSD0_PRSNT_L-I",
+ "SEC_CX1_SSD1_PRSNT_L-I",
+ "SEC_CX_BOOT_CMPLT_CX0-I",
+ "SEC_CX_BOOT_CMPLT_CX1-I",
+ "SEC_CX_TWARN_CX0_L-I",
+ "SEC_CX_TWARN_CX1_L-I",
+ "SEC_CX_OVT_SHDN_CX0-I",
+ "SEC_CX_OVT_SHDN_CX1-I",
+ "SEC_FNP_L_CX0-O",
+ "SEC_FNP_L_CX1-O",
+ "",
+ "SEC_MCU_GPIO-I",
+ "SEC_MCU_RST_N-O",
+ "SEC_MCU_RECOVERY_N-O";
+ };
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ imux36: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux37: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux38: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux39: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic@12 {
+ compatible = "ti,lm5066i";
+ reg = <0x12>;
+ shunt-resistor-micro-ohms = <190>;
+ status = "okay";
+ };
+
+ pmic@14 {
+ compatible = "ti,lm5066i";
+ reg = <0x14>;
+ shunt-resistor-micro-ohms = <190>;
+ status = "okay";
+ };
+
+ pwm@20 {
+ compatible = "maxim,max31790";
+ reg = <0x20>;
+ };
+
+ pwm@23 {
+ compatible = "maxim,max31790";
+ reg = <0x23>;
+ };
+
+ pwm@2c {
+ compatible = "maxim,max31790";
+ reg = <0x2c>;
+ };
+
+ pwm@2f {
+ compatible = "maxim,max31790";
+ reg = <0x2f>;
+ };
+};
+
+// I2C9
+// M.2
+&i2c8 {
+ status = "okay";
+ clock-frequency = <400000>;
+ multi-master;
+};
+
+// I2C10
+// HMC IO Expander
+// Module 0/1 IO Expanders
+&i2c9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ // Module 0, Expander @0x20
+ exp0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L-I",
+ "FPGA_READY_BMC-I",
+ "HMC_BMC_DETECT-O",
+ "HMC_PGOOD-O",
+ "",
+ "BMC_STBY_CYCLE-O",
+ "FPGA_EROT_FATAL_ERROR_L-I",
+ "WP_HW_EXT_CTRL_L-O",
+ "EROT_FPGA_RST_L-O",
+ "FPGA_EROT_RECOVERY_L-O",
+ "BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "USB_HUB_RESET_L-O",
+ "NCSI_CS1_SEL-O",
+ "SGPIO_EN_L-O",
+ "B2B_IOEXP_INT_L-I",
+ "I2C_BUS_MUX_RESET_L-O";
+ };
+
+ // Module 1, Expander @0x21
+ exp1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "SEC_FPGA_THERM_OVERT_L-I",
+ "SEC_FPGA_READY_BMC-I",
+ "",
+ "",
+ "",
+ "",
+ "SEC_FPGA_EROT_FATAL_ERROR_L-I",
+ "SEC_WP_HW_EXT_CTRL_L-O",
+ "SEC_EROT_FPGA_RST_L-O",
+ "SEC_FPGA_EROT_RECOVERY_L-O",
+ "SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "SEC_USB2_HUB_RST_L-O",
+ "",
+ "",
+ "",
+ "SEC_I2C_BUS_MUX_RESET_L-O";
+ };
+
+ // HMC Expander @0x27
+ exp2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "HMC_PRSNT_L-I",
+ "HMC_READY-I",
+ "HMC_EROT_FATAL_ERROR_L-I",
+ "I2C_MUX_SEL-O",
+ "HMC_EROT_SPI_MUX_SEL-O",
+ "HMC_EROT_RECOVERY_L-O",
+ "HMC_EROT_RST_L-O",
+ "GLOBAL_WP_HMC-O",
+ "FPGA_RST_L-O",
+ "USB2_HUB_RST-O",
+ "CPU_UART_MUX_SEL-O",
+ "",
+ "",
+ "",
+ "",
+ "";
+ };
+
+ // HMC Expander @0x74
+ exp3: gpio@74 {
+ compatible = "nxp,pca9555";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "IOB_PRSNT_L",
+ "IOB_DP_HPD",
+ "IOX_BMC_RESET",
+ "IOB_IOEXP_INT_L",
+ "IOB_UID_LED_L",
+ "IOB_UID_BTN_L",
+ "IOB_SYS_RST_BTN_L",
+ "IOB_PWR_LED_L",
+ "IOB_PWR_BTN_L",
+ "IOB_PHY_RST",
+ "CPLD_JTAG_MUX_SEL",
+ "",
+ "",
+ "",
+ "",
+ "";
+ };
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ // BMC FRU EEPROM - 256 bytes
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+};
+
+// I2C12
+&i2c11 {
+ status = "disabled";
+};
+
+// I2C13
+&i2c12 {
+ status = "disabled";
+};
+
+// I2C14
+// Module 0 UPHY3 SMBus
+&i2c13 {
+ status = "disabled";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+ status = "okay";
+ clock-frequency = <100000>;
+ multi-master;
+
+ //E1.S drive slot 0-3
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ e1si2c0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ e1si2c1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ e1si2c2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ e1si2c3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+// I2C16
+&i2c15 {
+ status = "okay";
+ clock-frequency = <100000>;
+ multi-master;
+
+ //E1.S drive slot 4-7
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ e1si2c4: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ e1si2c5: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ e1si2c6: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ e1si2c7: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&rng {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "", "", "", "", "", "", "", "",
+ /*B0-B7*/ "", "", "", "", "", "", "", "",
+ /*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+ /*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+ /*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I", "", "UART3_MUX_SEL-O",
+ "", "", "", "SGPIO_BMC_EN-O",
+ /*F0-F7*/ "", "", "", "", "", "", "", "",
+ /*G0-G7*/ "", "", "", "", "", "", "", "",
+ /*H0-H7*/ "", "", "", "", "", "", "", "",
+ /*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+ /*J0-J7*/ "", "", "", "", "", "", "", "",
+ /*K0-K7*/ "", "", "", "", "", "", "", "",
+ /*L0-L7*/ "", "", "", "", "", "", "", "",
+ /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "HMC_RESET_L-O", "STBY_POWER_EN-O",
+ "STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+ /*N0-N7*/ "", "", "", "", "", "", "", "",
+ /*O0-O7*/ "", "", "", "", "", "", "", "",
+ /*P0-P7*/ "", "", "", "", "", "", "", "",
+ /*Q0-Q7*/ "", "", "", "", "", "", "", "",
+ /*R0-R7*/ "", "", "", "", "", "", "", "",
+ /*S0-S7*/ "", "", "", "", "", "", "", "",
+ /*T0-T7*/ "", "", "", "", "", "", "", "",
+ /*U0-U7*/ "", "", "", "", "", "", "", "",
+ /*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+ /*W0-W7*/ "", "", "", "", "", "", "", "",
+ /*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+ /*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+ /*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+ /* 36 1.8V GPIOs */
+ gpio-line-names =
+ /*A0-A7*/ "", "", "", "", "", "", "", "",
+ /*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+ /*C0-C7*/ "", "", "", "", "", "", "", "",
+ /*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+ /*E0-E7*/ "", "", "", "", "", "", "", "";
+};
gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
};
bmc_err {
- lable = "BMC_fault";
+ label = "BMC_fault";
gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
};
sys_err {
- lable = "Sys_fault";
+ label = "Sys_fault";
gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
};
};
};
&gpio {
- pin_gpio_b0 {
+ pin-gpio-b0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_HDD1_PWR_EN";
};
- pin_gpio_b5 {
+ pin-gpio-b5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
input;
line-name = "BMC_USB1_OCI2";
};
- pin_gpio_h5 {
+ pin-gpio-h5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_CP0_PERST_ENABLE_R";
};
- pin_gpio_z2 {
+ pin-gpio-z2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "RST_PCA9546_U177_N";
};
- pin_gpio_aa6 {
+ pin-gpio-aa6-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_CP0_RESET_N";
};
- pin_gpio_aa7 {
+ pin-gpio-aa7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_TPM_RESET_N";
};
- pin_gpio_ab0 {
+ pin-gpio-ab0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
output-high;
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
- func_mode0 {
+ func-mode0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
output-low;
};
- func_mode1 {
+ func-mode1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
output-low;
};
- func_mode2 {
+ func-mode2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
output-low;
};
- seq_cont {
+ seq-cont-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-low;
};
- ncsi_cfg {
+ ncsi-cfg-hog {
gpio-hog;
input;
gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
};
&gpio {
- pin_func_mode0 {
+ pin-func-mode0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "func_mode0";
};
- pin_func_mode1 {
+ pin-func-mode1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(C, 5) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "func_mode1";
};
- pin_func_mode2 {
+ pin-func-mode2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "func_mode2";
};
- pin_gpio_a0 {
+ pin-gpio-a0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
input;
line-name = "BMC_FAN_RESERVED_N";
};
- pin_gpio_a1 {
+ pin-gpio-a1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "APSS_WDT_N";
};
- pin_gpio_b1 {
+ pin-gpio-b1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "APSS_BOOT_MODE";
};
- pin_gpio_b2 {
+ pin-gpio-b2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "APSS_RESET_N";
};
- pin_gpio_b7 {
+ pin-gpio-b7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SPIVID_STBY_RESET_N";
};
- pin_gpio_d1 {
+ pin-gpio-d1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_POWER_UP";
};
- pin_gpio_f1 {
+ pin-gpio-f1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
input;
line-name = "BMC_BATTERY_TEST";
};
- pin_gpio_f4 {
+ pin-gpio-f4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
input;
line-name = "AST_HW_FAULT_N";
};
- pin_gpio_f5 {
+ pin-gpio-f5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
input;
line-name = "AST_SYS_FAULT_N";
};
- pin_gpio_f7 {
+ pin-gpio-f7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_FULL_SPEED_N";
};
- pin_gpio_g3 {
+ pin-gpio-g3-hog {
gpio-hog;
gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_FAN_ERROR_N";
};
- pin_gpio_g4 {
+ pin-gpio-g4-hog {
gpio-hog;
gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
input;
line-name = "BMC_WDT_RST1_P";
};
- pin_gpio_g5 {
+ pin-gpio-g5-hog {
gpio-hog;
gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
input;
line-name = "BMC_WDT_RST2_P";
};
- pin_gpio_h0 {
+ pin-gpio-h0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
input;
line-name = "PE_SLOT_TEST_EN_N";
};
- pin_gpio_h1 {
+ pin-gpio-h1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
input;
line-name = "BMC_RTCRST_N";
};
- pin_gpio_h2 {
+ pin-gpio-h2-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SYS_PWROK_BMC";
};
- pin_gpio_h7 {
+ pin-gpio-h7-hog {
gpio-hog;
gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
output-high;
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
- nic_func_mode0 {
+ nic-func-mode0-hog {
gpio-hog;
gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
output-low;
};
- nic_func_mode1 {
+ nic-func-mode1-hog {
gpio-hog;
gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
output-low;
};
- seq_cont {
+ seq-cont-hog {
gpio-hog;
gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-low;
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
- model = "Swift BMC";
- compatible = "ibm,swift-bmc", "aspeed,ast2500";
-
- chosen {
- stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlycon";
- };
-
- memory@80000000 {
- reg = <0x80000000 0x20000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- flash_memory: region@98000000 {
- no-map;
- reg = <0x98000000 0x04000000>; /* 64M */
- };
-
- gfx_memory: framebuffer {
- size = <0x01000000>;
- alignment = <0x01000000>;
- compatible = "shared-dma-pool";
- reusable;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- event-air-water {
- label = "air-water";
- gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(B, 5)>;
- };
-
- event-checkstop {
- label = "checkstop";
- gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(J, 2)>;
- };
-
- event-ps0-presence {
- label = "ps0-presence";
- gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(R, 7)>;
- };
-
- event-ps1-presence {
- label = "ps1-presence";
- gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(N, 0)>;
- };
-
- event-oppanel-presence {
- label = "oppanel-presence";
- gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(A, 7)>;
- };
-
- event-opencapi-riser-presence {
- label = "opencapi-riser-presence";
- gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(I, 0)>;
- };
- };
-
- iio-hwmon-battery {
- compatible = "iio-hwmon";
- io-channels = <&adc 12>;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <1000>;
-
- event-scm0-presence {
- label = "scm0-presence";
- gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
- linux,code = <6>;
- };
-
- event-scm1-presence {
- label = "scm1-presence";
- gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
- linux,code = <7>;
- };
-
- event-cpu0vrm-presence {
- label = "cpu0vrm-presence";
- gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
- linux,code = <12>;
- };
-
- event-cpu1vrm-presence {
- label = "cpu1vrm-presence";
- gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
- linux,code = <13>;
- };
-
- event-fan0-presence {
- label = "fan0-presence";
- gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
- linux,code = <5>;
- };
-
- event-fan1-presence {
- label = "fan1-presence";
- gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
- linux,code = <6>;
- };
-
- event-fan2-presence {
- label = "fan2-presence";
- gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
- linux,code = <7>;
- };
-
- event-fan3-presence {
- label = "fan3-presence";
- gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
- linux,code = <8>;
- };
-
- event-fanboost-presence {
- label = "fanboost-presence";
- gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
- linux,code = <9>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- fan0 {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
- };
-
- fan1 {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
- };
-
- fan2 {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
- };
-
- fan3 {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
- };
-
- fanboost {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
- };
-
- front-fault {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
- };
-
- front-power {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
- };
-
- front-id {
- retain-state-shutdown;
- default-state = "keep";
- gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
- };
-
- rear-fault {
- gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
- };
-
- rear-id {
- gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
- };
- };
-
- fsi: gpio-fsi {
- compatible = "fsi-master-gpio", "fsi-master";
- #address-cells = <2>;
- #size-cells = <0>;
- no-gpio-delays;
-
- clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
- data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
- mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
- enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
- trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
- };
-
- iio-hwmon-dps310 {
- compatible = "iio-hwmon";
- io-channels = <&dps 0>;
- };
-
-};
-
-&fmc {
- status = "okay";
-
- flash@0 {
- status = "okay";
- label = "bmc";
- m25p,fast-read;
- spi-max-frequency = <100000000>;
- partitions {
- #address-cells = < 1 >;
- #size-cells = < 1 >;
- compatible = "fixed-partitions";
- u-boot@0 {
- reg = < 0 0x60000 >;
- label = "u-boot";
- };
- u-boot-env@60000 {
- reg = < 0x60000 0x20000 >;
- label = "u-boot-env";
- };
- obmc-ubi@80000 {
- reg = < 0x80000 0x7F80000>;
- label = "obmc-ubi";
- };
- };
- };
-
- flash@1 {
- status = "okay";
- label = "alt-bmc";
- m25p,fast-read;
- spi-max-frequency = <100000000>;
- partitions {
- #address-cells = < 1 >;
- #size-cells = < 1 >;
- compatible = "fixed-partitions";
- u-boot@0 {
- reg = < 0 0x60000 >;
- label = "alt-u-boot";
- };
- u-boot-env@60000 {
- reg = < 0x60000 0x20000 >;
- label = "alt-u-boot-env";
- };
- obmc-ubi@80000 {
- reg = < 0x80000 0x7F80000>;
- label = "alt-obmc-ubi";
- };
- };
- };
-};
-
-&spi1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi1_default>;
-
- flash@0 {
- status = "okay";
- label = "pnor";
- m25p,fast-read;
- spi-max-frequency = <100000000>;
- };
-};
-
-&uart1 {
- /* Rear RS-232 connector */
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd1_default
- &pinctrl_rxd1_default
- &pinctrl_nrts1_default
- &pinctrl_ndtr1_default
- &pinctrl_ndsr1_default
- &pinctrl_ncts1_default
- &pinctrl_ndcd1_default
- &pinctrl_nri1_default>;
-};
-
-&uart2 {
- /* APSS */
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
- status = "okay";
-};
-
-&lpc_ctrl {
- status = "okay";
- memory-region = <&flash_memory>;
- flash = <&spi1>;
-};
-
-&mac0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rmii1_default>;
- use-ncsi;
- clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
- <&syscon ASPEED_CLK_MAC1RCLK>;
- clock-names = "MACCLK", "RCLK";
-};
-
-&i2c2 {
- status = "okay";
-
- /* MUX ->
- * Samtec 1
- * Samtec 2
- */
-};
-
-&i2c3 {
- status = "okay";
-
- max31785@52 {
- compatible = "maxim,max31785a";
- reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- fan@0 {
- compatible = "pmbus-fan";
- reg = <0>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
-
- fan@1 {
- compatible = "pmbus-fan";
- reg = <1>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
-
- fan@2 {
- compatible = "pmbus-fan";
- reg = <2>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
-
- fan@3 {
- compatible = "pmbus-fan";
- reg = <3>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
-
- fan@4 {
- compatible = "pmbus-fan";
- reg = <4>;
- tach-pulses = <2>;
- maxim,fan-rotor-input = "tach";
- maxim,fan-pwm-freq = <25000>;
- maxim,fan-no-watchdog;
- maxim,fan-no-fault-ramp;
- maxim,fan-ramp = <2>;
- maxim,fan-fault-pin-mon;
- };
- };
-
- pca0: pca9552@60 {
- compatible = "nxp,pca9552";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio@0 {
- reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@1 {
- reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@2 {
- reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@3 {
- reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@4 {
- reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@5 {
- reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@6 {
- reg = <6>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@7 {
- reg = <7>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@8 {
- reg = <8>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@9 {
- reg = <9>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@10 {
- reg = <10>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@11 {
- reg = <11>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@12 {
- reg = <12>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@13 {
- reg = <13>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@14 {
- reg = <14>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@15 {
- reg = <15>;
- type = <PCA955X_TYPE_GPIO>;
- };
- };
-
- power-supply@68 {
- compatible = "ibm,cffps2";
- reg = <0x68>;
- };
-
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
-
- power-supply@69 {
- compatible = "ibm,cffps2";
- reg = <0x69>;
- };
-
- eeprom@51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- };
-};
-
-&i2c7 {
- status = "okay";
-
- dps: dps310@76 {
- compatible = "infineon,dps310";
- reg = <0x76>;
- #io-channel-cells = <0>;
- };
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- si7021a20@20 {
- compatible = "si,si7021a20";
- reg = <0x20>;
- };
-
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
-
- pca1: pca9551@60 {
- compatible = "nxp,pca9551";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio@0 {
- reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@1 {
- reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@2 {
- reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@3 {
- reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@4 {
- reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@5 {
- reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@6 {
- reg = <6>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@7 {
- reg = <7>;
- type = <PCA955X_TYPE_GPIO>;
- };
- };
-};
-
-&i2c8 {
- status = "okay";
-
- pca9552: pca9552@60 {
- compatible = "nxp,pca9552";
- reg = <0x60>;
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
- "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
- "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
- "P9_SCM0_PRES", "P9_SCM1_PRES",
- "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
- "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
- "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
- "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
- gpio@0 {
- reg = <0>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@1 {
- reg = <1>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@2 {
- reg = <2>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@3 {
- reg = <3>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@4 {
- reg = <4>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@5 {
- reg = <5>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@6 {
- reg = <6>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@7 {
- reg = <7>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@8 {
- reg = <8>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@9 {
- reg = <9>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@10 {
- reg = <10>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@11 {
- reg = <11>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@12 {
- reg = <12>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@13 {
- reg = <13>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@14 {
- reg = <14>;
- type = <PCA955X_TYPE_GPIO>;
- };
-
- gpio@15 {
- reg = <15>;
- type = <PCA955X_TYPE_GPIO>;
- };
- };
-
- rtc@32 {
- compatible = "epson,rx8900";
- reg = <0x32>;
- };
-
- eeprom@51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- };
-
- ucd90160@64 {
- compatible = "ti,ucd90160";
- reg = <0x64>;
- };
-};
-
-&i2c9 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
-
- tmp423a@4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
-
- ir35221@71 {
- compatible = "infineon,ir35221";
- reg = <0x71>;
- };
-
- ir35221@72 {
- compatible = "infineon,ir35221";
- reg = <0x72>;
- };
-
- pca2: pca9539@74 {
- compatible = "nxp,pca9539";
- reg = <0x74>;
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio@0 {
- reg = <0>;
- };
-
- gpio@1 {
- reg = <1>;
- };
-
- gpio@2 {
- reg = <2>;
- };
-
- gpio@3 {
- reg = <3>;
- };
-
- gpio@4 {
- reg = <4>;
- };
-
- gpio@5 {
- reg = <5>;
- };
-
- gpio@6 {
- reg = <6>;
- };
-
- gpio@7 {
- reg = <7>;
- };
-
- gpio@8 {
- reg = <8>;
- };
-
- gpio@9 {
- reg = <9>;
- };
-
- gpio@10 {
- reg = <10>;
- };
-
- gpio@11 {
- reg = <11>;
- };
-
- gpio@12 {
- reg = <12>;
- };
-
- gpio@13 {
- reg = <13>;
- };
-
- gpio@14 {
- reg = <14>;
- };
-
- gpio@15 {
- reg = <15>;
- };
- };
-};
-
-&i2c10 {
- status = "okay";
-
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
-
- tmp423a@4c {
- compatible = "ti,tmp423";
- reg = <0x4c>;
- };
-
- ir35221@71 {
- compatible = "infineon,ir35221";
- reg = <0x71>;
- };
-
- ir35221@72 {
- compatible = "infineon,ir35221";
- reg = <0x72>;
- };
-
- pca3: pca9539@74 {
- compatible = "nxp,pca9539";
- reg = <0x74>;
- #address-cells = <1>;
- #size-cells = <0>;
- gpio-controller;
- #gpio-cells = <2>;
-
- gpio@0 {
- reg = <0>;
- };
-
- gpio@1 {
- reg = <1>;
- };
-
- gpio@2 {
- reg = <2>;
- };
-
- gpio@3 {
- reg = <3>;
- };
-
- gpio@4 {
- reg = <4>;
- };
-
- gpio@5 {
- reg = <5>;
- };
-
- gpio@6 {
- reg = <6>;
- };
-
- gpio@7 {
- reg = <7>;
- };
-
- gpio@8 {
- reg = <8>;
- };
-
- gpio@9 {
- reg = <9>;
- };
-
- gpio@10 {
- reg = <10>;
- };
-
- gpio@11 {
- reg = <11>;
- };
-
- gpio@12 {
- reg = <12>;
- };
-
- gpio@13 {
- reg = <13>;
- };
-
- gpio@14 {
- reg = <14>;
- };
-
- gpio@15 {
- reg = <15>;
- };
- };
-};
-
-&i2c11 {
- /* MUX
- * -> PCIe Slot 0
- * -> PCIe Slot 1
- * -> PCIe Slot 2
- * -> PCIe Slot 3
- */
- status = "okay";
-};
-
-&i2c12 {
- status = "okay";
-
- tmp275@48 {
- compatible = "ti,tmp275";
- reg = <0x48>;
- };
-
- tmp275@4a {
- compatible = "ti,tmp275";
- reg = <0x4a>;
- };
-};
-
-&i2c13 {
- status = "okay";
-};
-
-&vuart {
- status = "okay";
-};
-
-&gfx {
- status = "okay";
- memory-region = <&gfx_memory>;
-};
-
-&wdt1 {
- aspeed,reset-type = "none";
- aspeed,external-signal;
- aspeed,ext-push-pull;
- aspeed,ext-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
- aspeed,alt-boot;
-};
-
-&ibt {
- status = "okay";
-};
-
-&adc {
- status = "okay";
-};
-
-&sdmmc {
- status = "okay";
-};
-
-&sdhci1 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sd2_default>;
-};
-
-#include "ibm-power9-dual.dtsi"
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
- line_iso_u146_en {
+ line-iso-u146-en-hog {
gpio-hog;
gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
output-high;
};
- ncsi_mux_en_n {
+ ncsi-mux-en-n-hog {
gpio-hog;
gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
output-low;
};
- line_bmc_i2c2_sw_rst_n {
+ line-bmc-i2c2-sw-rst-n-hog {
gpio-hog;
gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
output-high;
};
- line_bmc_i2c5_sw_rst_n {
+ line-bmc-i2c5-sw-rst-n-hog {
gpio-hog;
gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
output-high;
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0xfffe8000 0x8100>;
+ ranges = <0 0xfffe8000 0x10000>;
timer: timer@80 {
compatible = "brcm,bcm6328-timer", "syscon";
reg = <0x80 0x3c>;
};
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@100 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x100 0x04>, <0x114 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@104 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x104 0x04>, <0x118 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@108 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x108 0x04>, <0x11c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@10c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10c 0x04>, <0x120 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@110 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x110 0x04>, <0x124 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ rng@300 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x300 0x28>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
serial0: serial@600 {
compatible = "brcm,bcm6345-uart";
reg = <0x600 0x1b>;
status = "disabled";
};
+ leds: led-controller@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x700 0xdc>;
+ status = "disabled";
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x8000 0x50>;
};
+ pl081_dma: dma-controller@d000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0xd000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
+
reboot {
compatible = "syscon-reboot";
regmap = <&timer>;
#size-cells = <1>;
ranges = <0 0xfffe8000 0x8000>;
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@100 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x100 0x04>, <0x114 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@104 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x104 0x04>, <0x118 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@108 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x108 0x04>, <0x11c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@10c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10c 0x04>, <0x120 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@110 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x110 0x04>, <0x124 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ rng@300 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x300 0x28>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
uart0: serial@600 {
compatible = "brcm,bcm6345-uart";
reg = <0x600 0x20>;
status = "disabled";
};
+ leds: led-controller@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x700 0xdc>;
+ status = "disabled";
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ watchdog@480 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x480 0x10>;
+ };
+
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x500 0x04>, <0x520 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x504 0x04>, <0x524 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x508 0x04>, <0x528 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@50c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x50c 0x04>, <0x52c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x510 0x04>, <0x530 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 160 .. 191 */
+ gpio5: gpio@514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x514 0x04>, <0x534 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 192 .. 223 */
+ gpio6: gpio@518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x518 0x04>, <0x538 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 224 .. 255 */
+ gpio7: gpio@51c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x51c 0x04>, <0x53c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ rng@b80 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
};
};
+ leds: led-controller@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x3000 0xdc>;
+ status = "disabled";
+ };
+
+ pl081_dma: dma-controller@11000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0x11000 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
rng@b80 {
compatible = "brcm,iproc-rng200";
reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
};
leds: led-controller@800 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ watchdog@480 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x480 0x10>;
+ };
+
+ watchdog@4c0 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x4c0 0x10>;
+ status = "disabled";
+ };
+
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x500 0x04>, <0x520 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x504 0x04>, <0x524 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x508 0x04>, <0x528 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@50c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x50c 0x04>, <0x52c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x510 0x04>, <0x530 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 160 .. 191 */
+ gpio5: gpio@514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x514 0x04>, <0x534 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 192 .. 223 */
+ gpio6: gpio@518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x518 0x04>, <0x538 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 224 .. 255 */
+ gpio7: gpio@51c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x51c 0x04>, <0x53c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ rng@b80 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
};
};
+ leds: led-controller@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x3000 0xdc>;
+ status = "disabled";
+ };
+
+ pl081_dma: dma-controller@11000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0x11000 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ uart1: serial@13000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x13000 0x1000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
};
};
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ watchdog@480 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x480 0x10>;
+ };
+
+ watchdog@4c0 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x4c0 0x10>;
+ status = "disabled";
+ };
+
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x500 0x04>, <0x520 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x504 0x04>, <0x524 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x508 0x04>, <0x528 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@50c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x50c 0x04>, <0x52c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x510 0x04>, <0x530 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 160 .. 191 */
+ gpio5: gpio@514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x514 0x04>, <0x534 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 192 .. 223 */
+ gpio6: gpio@518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x518 0x04>, <0x538 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 224 .. 255 */
+ gpio7: gpio@51c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x51c 0x04>, <0x53c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ rng@b80 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ leds: led-controller@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x700 0xdc>;
+ status = "disabled";
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
};
};
+ pl081_dma: dma-controller@11000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0x11000 0x1000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&uart_clk>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
ranges = <0x0 0x0 0x80000>;
memc-ddr@2000 {
- compatible = "brcm,brcmstb-memc-ddr";
+ compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+ "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x800>;
};
ranges = <0x0 0x80000 0x80000>;
memc-ddr@2000 {
- compatible = "brcm,brcmstb-memc-ddr";
+ compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+ "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x800>;
};
ranges = <0x0 0x100000 0x80000>;
memc-ddr@2000 {
- compatible = "brcm,brcmstb-memc-ddr";
+ compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+ "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x800>;
};
led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
- pwms = <&pwm 1 50000>;
+ pwms = <&pwm 1 50000 0>;
max-brightness = <255>;
};
led-2 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
- pwms = <&pwm 2 50000>;
+ pwms = <&pwm 2 50000 0>;
max-brightness = <255>;
};
led-3 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
- pwms = <&pwm 3 50000>;
+ pwms = <&pwm 3 50000 0>;
max-brightness = <255>;
};
};
&pwm {
status = "okay";
- #pwm-cells = <2>;
};
&uart0 {
cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
- switch@0 {
+ ethernet-switch@0 {
compatible = "micrel,ks8995";
reg = <0>;
spi-max-frequency = <50000000>;
+
+ /*
+ * The PHYs are accessed over the external MDIO
+ * bus and not internally through the switch control
+ * registers.
+ */
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ reg = <0>;
+ label = "1";
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
+ ethernet-port@1 {
+ reg = <1>;
+ label = "2";
+ phy-mode = "mii";
+ phy-handle = <&phy2>;
+ };
+ ethernet-port@2 {
+ reg = <2>;
+ label = "3";
+ phy-mode = "mii";
+ phy-handle = <&phy3>;
+ };
+ ethernet-port@3 {
+ reg = <3>;
+ label = "4";
+ phy-mode = "mii";
+ phy-handle = <&phy4>;
+ };
+ ethernet-port@4 {
+ reg = <4>;
+ ethernet = <ðb>;
+ phy-mode = "mii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ };
};
};
};
/*
- * EthB - connected to the KS8995 switch ports 1-4
- * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
- * all four switch ports, also using an out of tree multiphy patch.
- * Do we need a new binding and property for this?
+ * EthB connects to the KS8995 CPU port and faces ports 1-4
+ * through the switch fabric.
+ *
+ * To complicate things, the MDIO channel is also only
+ * accessible through EthB, but used independently for PHY
+ * control.
*/
- ethernet@c8009000 {
+ ethb: ethernet@c8009000 {
status = "okay";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
+ phy-mode = "mii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
mdio {
#address-cells = <1>;
#size-cells = <0>;
- /* Should be ports 1-4 on the KS8995 switch */
+ /*
+ * LAN ports 1-4 on the KS8995 switch
+ * and PHY5 for WAN need to be accessed
+ * through this external MDIO channel.
+ */
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
phy4: ethernet-phy@4 {
reg = <4>;
};
-
- /* Should be port 5 on the KS8995 switch */
phy5: ethernet-phy@5 {
reg = <5>;
};
};
};
- /* EthC - connected to KS8995 switch port 5 */
- ethernet@c800a000 {
+ /*
+ * EthC connects to MII-P5 on the KS8995 bypassing
+ * all of the switch logic and facing PHY5
+ */
+ ethc: ethernet@c800a000 {
status = "okay";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
- phy-mode = "rgmii";
+ phy-mode = "mii";
phy-handle = <&phy5>;
};
};
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
- phy0: ethernet-phy@0 {
- reg = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
"Out Jack", "HPL",
"Out Jack", "HPR",
"AIN1L", "In Jack",
- "AIN1L", "In Jack";
+ "AIN1R", "In Jack";
status = "okay";
simple-audio-card,dai-link@0 {
i2c {
compatible = "i2c-gpio";
- gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */
- &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */
+ sda-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
};
};
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
- sound-dai = <&audio0 0>;
+ sound-dai = <&audio0>;
};
simple-audio-card,codec {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+ model = "JTY D101";
+ compatible = "jty,d101", "mediatek,mt6572";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ stdout-path = "serial0:921600n8";
+
+ framebuffer: framebuffer@bf400000 {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_reserved>;
+ width = <1024>;
+ height = <600>;
+ stride = <(1024 * 2)>;
+ format = "r5g6b5";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ connsys@80000000 {
+ reg = <0x80000000 0x100000>;
+ no-map;
+ };
+
+ modem@be000000 {
+ reg = <0xbe000000 0x1400000>;
+ no-map;
+ };
+
+ framebuffer_reserved: framebuffer@bf400000 {
+ reg = <0xbf400000 0xc00000>;
+ no-map;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+ model = "Lenovo A369i";
+ compatible = "lenovo,a369i", "mediatek,mt6572";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ stdout-path = "serial0:921600n8";
+
+ framebuffer: framebuffer@9fa00000 {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_reserved>;
+ width = <480>;
+ height = <800>;
+ stride = <(480 * 2)>;
+ format = "r5g6b5";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ connsys@80000000 {
+ reg = <0x80000000 0x100000>;
+ no-map;
+ };
+
+ framebuffer_reserved: framebuffer@9fa00000 {
+ reg = <0x9fa00000 0x600000>;
+ no-map;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&sysirq>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "mediatek,mt6589-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt6572-wdt", "mediatek,mt6589-wdt";
+ reg = <0x10007000 0x100>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+ timeout-sec = <15>;
+ #reset-cells = <1>;
+ };
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt6572-timer", "mediatek,mt6577-timer";
+ reg = <0x10008000 0x80>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ sysirq: interrupt-controller@10200100 {
+ compatible = "mediatek,mt6572-sysirq", "mediatek,mt6577-sysirq";
+ reg = <0x10200100 0x1c>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
+ reg = <0x10211000 0x1000>,
+ <0x10212000 0x2000>,
+ <0x10214000 0x2000>,
+ <0x10216000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ };
+
+ uart0: serial@11005000 {
+ compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+ reg = <0x11005000 0x400>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ clock-names = "baud";
+ status = "disabled";
+ };
+
+ uart1: serial@11006000 {
+ compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+ reg = <0x11006000 0x400>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ clock-names = "baud";
+ status = "disabled";
+ };
+ };
+};
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
- spi-cs-setup-ns = <7>;
+ spi-cs-setup-delay-ns = <7>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
m25p,fast-read;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
- spi-cs-setup-ns = <7>;
+ spi-cs-setup-delay-ns = <7>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
m25p,fast-read;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
- spi-cs-setup-ns = <7>;
+ spi-cs-setup-delay-ns = <7>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
m25p,fast-read;
wilc: wifi@0 {
reg = <0>;
- compatible = "microchip,wilc1000";
+ compatible = "microchip,wilc3000", "microchip,wilc1000";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wilc_default>;
clocks = <&pmc PMC_TYPE_SYSTEM 9>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
- spi-cs-setup-ns = <7>;
+ spi-cs-setup-delay-ns = <7>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
m25p,fast-read;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+ status = "okay";
+};
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2_default>;
+ status = "okay";
+};
+
+&can3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can3_default>;
+ status = "okay";
};
&dma0 {
};
&pioa {
+ pinctrl_can1_default: can1-default {
+ pinmux = <PIN_PD10__CANTX1>,
+ <PIN_PD11__CANRX1>;
+ bias-disable;
+ };
+
+ pinctrl_can2_default: can2-default {
+ pinmux = <PIN_PD12__CANTX2>,
+ <PIN_PD13__CANRX2>;
+ bias-disable;
+ };
+
+ pinctrl_can3_default: can3-default {
+ pinmux = <PIN_PD14__CANTX3>,
+ <PIN_PD15__CANRX3>;
+ bias-disable;
+ };
+
pinctrl_gmac0_default: gmac0-default {
pinmux = <PIN_PA26__G0_TX0>,
<PIN_PA27__G0_TX1>,
&sdmmc1 {
bus-width = <4>;
+ no-1-8-v;
+ sdhci-caps-mask = <0x0 0x00200000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay";
i2c2 = &i2c9;
};
- clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <24000000>;
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pinctrl_i2s0_default>;
};
+&main_xtal {
+ clock-frequency = <24000000>;
+};
+
&pdmc0 {
#sound-dai-cells = <0>;
microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
};
};
+&slow_xtal {
+ clock-frequency = <32768>;
+};
+
&spdifrx {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdifrx_default>;
i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
- &pioA 26 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioA 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 26 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c_gpio0: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
- &pioA 24 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_bitbang>;
- gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
- <&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+ sda-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 8 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
- &pioB 5 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
led-power-green {
label = "smartgw:power:green";
gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
- default-state = "on";
+ linux,default-trigger = "timer";
};
led-power-red {
i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
- &pioA 21 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <5>; /* ~100 kHz */
i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
- &pioA 31 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
- <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+ sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c-gpio-1 {
compatible = "i2c-gpio";
- gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
- <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+ sda-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
- &pioA 31 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c-gpio-1 {
compatible = "i2c-gpio";
- gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
- &pioC 1 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioC 1 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c-gpio-2 {
compatible = "i2c-gpio";
- gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
- &pioB 5 GPIO_ACTIVE_HIGH /* scl */
- >;
+ sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
clocks {
slow_xtal: clock-slowxtal {
compatible = "fixed-clock";
+ clock-output-names = "slow_xtal";
#clock-cells = <0>;
};
main_xtal: clock-mainxtal {
compatible = "fixed-clock";
+ clock-output-names = "main_xtal";
#clock-cells = <0>;
};
};
status = "disabled";
};
+ hlcdc: hlcdc@f8038000 {
+ compatible = "microchip,sam9x75-xlcdc";
+ reg = <0xf8038000 0x4000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+ clock-names = "periph_clk", "sys_clk", "slow_clk";
+ status = "disabled";
+
+ display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ pwm {
+ compatible = "atmel,hlcdc-pwm";
+ #pwm-cells = <3>;
+ };
+ };
+
flx9: flexcom@f8040000 {
compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
reg = <0xf8040000 0x200>;
};
};
+ lvds_controller: lvds-controller@f8060000 {
+ compatible = "microchip,sam9x75-lvds";
+ reg = <0xf8060000 0x100>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
matrix: matrix@ffffde00 {
compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
reg = <0xffffde00 0x200>;
device_type = "cpu";
compatible = "arm,cortex-a5";
reg = <0>;
+ d-cache-size = <0x8000>; // L1, 32 KB
+ i-cache-size = <0x8000>; // L1, 32 KB
next-level-cache = <&L2>;
};
};
interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
cache-unified;
cache-level = <2>;
+ cache-size = <0x20000>; // L2, 128 KB
};
ebi: ebi@10000000 {
device_type = "cpu";
compatible = "arm,cortex-a5";
reg = <0x0>;
+ d-cache-size = <0x8000>; // L1, 32 KB
+ i-cache-size = <0x8000>; // L1, 32 KB
};
};
device_type = "cpu";
compatible = "arm,cortex-a5";
reg = <0>;
+ d-cache-size = <0x8000>; // L1, 32 KB
+ i-cache-size = <0x8000>; // L1, 32 KB
next-level-cache = <&L2>;
};
};
interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
cache-unified;
cache-level = <2>;
+ cache-size = <0x20000>; // L2, 128 KB
};
ebi: ebi@10000000 {
device_type = "cpu";
clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
clock-names = "cpu";
+ d-cache-size = <0x8000>; // L1, 32 KB
+ i-cache-size = <0x8000>; // L1, 32 KB
+ next-level-cache = <&L2>;
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x40000>; // L2, 256 KB
+ cache-unified;
+ };
};
};
clocks {
main_xtal: clock-mainxtal {
compatible = "fixed-clock";
+ clock-output-names = "main_xtal";
#clock-cells = <0>;
};
slow_xtal: clock-slowxtal {
compatible = "fixed-clock";
+ clock-output-names = "slow_xtal";
#clock-cells = <0>;
};
};
reg = <0xe0020000 0x8>;
};
+ can0: can@e0828000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0828000 0x200>, <0x100000 0x7800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 58>;
+ assigned-clock-rates = <40000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can1: can@e082c000 {
+ compatible = "bosch,m_can";
+ reg = <0xe082c000 0x200>, <0x100000 0xbc00>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 59>;
+ assigned-clock-rates = <40000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can2: can@e0830000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0830000 0x200>, <0x100000 0x10000>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 60>;
+ assigned-clock-rates = <40000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can3: can@e0834000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0834000 0x200>, <0x110000 0x4400>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+ assigned-clock-rates = <40000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can4: can@e0838000 {
+ compatible = "bosch,m_can";
+ reg = <0xe0838000 0x200>, <0x110000 0x8800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+ assigned-clock-rates = <40000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
dma2: dma-controller@e1200000 {
compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
reg = <0xe1200000 0x1000>;
status = "disabled";
};
+ aes: crypto@e1600000 {
+ compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes";
+ reg = <0xe1600000 0x100>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+ clock-names = "aes_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+ <&dma0 AT91_XDMAC_DT_PERID(2)>;
+ dma-names = "tx", "rx";
+ };
+
+ sha: crypto@e1604000 {
+ compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha";
+ reg = <0xe1604000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 78>;
+ clock-names = "sha_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+ dma-names = "tx";
+ };
+
+ tdes: crypto@e1608000 {
+ compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes";
+ reg = <0xe1608000 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 91>;
+ clock-names = "tdes_clk";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+ <&dma0 AT91_XDMAC_DT_PERID(53)>;
+ dma-names = "tx", "rx";
+ };
+
+ trng: rng@e160c000 {
+ compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng";
+ reg = <0xe160c000 0x100>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 92>;
+ };
+
dma0: dma-controller@e1610000 {
compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
reg = <0xe1610000 0x1000>;
clock-names = "pclk", "gclk";
};
+ pwm: pwm@e1818000 {
+ compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm";
+ reg = <0xe1818000 0x500>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 72>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
flx0: flexcom@e1820000 {
compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe1820000 0x200>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>; /* min followed by max */
+ d-cache-size = <0x8000>; // L1, 32 KB
+ i-cache-size = <0x8000>; // L1, 32 KB
+ next-level-cache = <&L2>;
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x40000>; // L2, 256 KB
+ cache-unified;
+ };
};
};
};
clocks {
- slow_xtal: slow_xtal {
+ slow_xtal: clock-slowxtal {
compatible = "fixed-clock";
+ clock-output-names = "slow_xtal";
#clock-cells = <0>;
};
- main_xtal: main_xtal {
+ main_xtal: clock-mainxtal {
compatible = "fixed-clock";
+ clock-output-names = "main_xtal";
#clock-cells = <0>;
};
- usb_clk: usb_clk {
+ usb_clk: clock-usbclk {
compatible = "fixed-clock";
#clock-cells = <0>;
+ clock-output-names = "usb_clk";
clock-frequency = <48000000>;
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+ model = "Asus Portable AiO P1801-T";
+ compatible = "asus,p1801-t", "nvidia,tegra30";
+ chassis-type = "convertible";
+
+ aliases {
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc1; /* uSD slot */
+ mmc2 = &sdmmc3; /* WiFi */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ display0 = &hdmi;
+
+ serial1 = &uartc; /* Bluetooth */
+ serial2 = &uartb; /* GPS */
+ };
+
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ */
+ chosen {};
+
+ firmware {
+ trusted-foundations {
+ compatible = "tlm,trusted-foundations";
+ tlm,version-major = <2>;
+ tlm,version-minor = <8>;
+ };
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma@80000000 {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0x80000000 0x30000000>;
+ size = <0x10000000>; /* 256MiB */
+ linux,cma-default;
+ reusable;
+ };
+
+ framebuffer@abe01000 {
+ reg = <0xabe01000 (1920 * 1080 * 4)>;
+ no-map;
+ };
+
+ trustzone@bfe00000 {
+ reg = <0xbfe00000 0x200000>; /* 2MB */
+ no-map;
+ };
+
+ ramoops@fea00000 {
+ compatible = "ramoops";
+ reg = <0xfea00000 0x10000>; /* 64kB */
+ console-size = <0x8000>; /* 32kB */
+ record-size = <0x400>; /* 1kB */
+ ecc-size = <16>;
+ };
+ };
+
+ host1x@50000000 {
+ hdmi: hdmi@54280000 {
+ status = "okay";
+
+ hdmi-supply = <&hdmi_5v0_sys>;
+ pll-supply = <&vdd_1v8_vio>;
+ vdd-supply = <&vdd_3v3_sys>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+ };
+
+ gpio@6000d000 {
+ init-lpm-in-hog {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+
+ init-lpm-out-hog {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+ <TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+
+ tp-vendor-hog {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+ input;
+ };
+ };
+
+ vde@6001a000 {
+ assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+ assigned-clock-rates = <408000000>;
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* SDMMC1 pinmux */
+ sdmmc1-clk {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1-cmd {
+ nvidia,pins = "sdmmc1_dat3_py4",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_cmd_pz1";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1-cd {
+ nvidia,pins = "gmi_iordy_pi5";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1-wp {
+ nvidia,pins = "vi_d11_pt3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* SDMMC2 pinmux */
+ vi-d1-pd5 {
+ nvidia,pins = "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d5_pl3",
+ "vi_d7_pl5";
+ nvidia,function = "sdmmc2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ vi-d8-pl6 {
+ nvidia,pins = "vi_d8_pl6",
+ "vi_d9_pl7";
+ nvidia,function = "sdmmc2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+
+ /* SDMMC3 pinmux */
+ sdmmc3-clk {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3-cmd {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* SDMMC4 pinmux */
+ sdmmc4-clk {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4-cmd {
+ nvidia,pins = "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4-rst-n {
+ nvidia,pins = "sdmmc4_rst_n_pcc3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ cam-mclk {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ drive-sdmmc4 {
+ nvidia,pins = "drive_gma",
+ "drive_gmb",
+ "drive_gmc",
+ "drive_gmd";
+ nvidia,pull-down-strength = <9>;
+ nvidia,pull-up-strength = <9>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+
+ /* I2C pinmux */
+ gen1-i2c {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ };
+ gen2-i2c {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "i2c2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ };
+ cam-i2c {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ };
+ ddc-i2c {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ };
+ pwr-i2c {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ };
+ hotplug-i2c {
+ nvidia,pins = "pu4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* HDMI pinmux */
+ hdmi-cec {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ };
+ hdmi-hpd {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* UART-A */
+ ulpi-data0-po1 {
+ nvidia,pins = "ulpi_data0_po1";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi-data1-po2 {
+ nvidia,pins = "ulpi_data1_po2";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi-data5-po6 {
+ nvidia,pins = "ulpi_data5_po6";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi-data7-po0 {
+ nvidia,pins = "ulpi_data7_po0",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data6_po7";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* UART-B */
+ uartb-txd-rts {
+ nvidia,pins = "uart2_txd_pc2",
+ "uart2_rts_n_pj6";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uartb-rxd-cts {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_cts_n_pj5";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* UART-C */
+ uartc-rxd-cts {
+ nvidia,pins = "uart3_cts_n_pa1",
+ "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uartc-txd-rts {
+ nvidia,pins = "uart3_rts_n_pc0",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* UART-D */
+ ulpi-nxt-py2 {
+ nvidia,pins = "ulpi_nxt_py2";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi-clk-py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* I2S pinmux */
+ dap-i2s0 {
+ nvidia,pins = "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap-i2s1 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap3-fs {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_din_pp1";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap3-dout {
+ nvidia,pins = "dap3_dout_pp2",
+ "dap3_sclk_pp3";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap-i2s3 {
+ nvidia,pins = "dap4_fs_pp4",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_sclk_pp7";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* sensors pinmux */
+ nct-irq {
+ nvidia,pins = "pcc2";
+ nvidia,function = "i2s4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Asus EC pinmux */
+ ec-irqs {
+ nvidia,pins = "kb_row10_ps2",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ec-reqs {
+ nvidia,pins = "kb_col1_pq1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* memory type bootstrap */
+ mem-boostraps {
+ nvidia,pins = "gmi_ad4_pg4",
+ "gmi_ad5_pg5";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* PCI-e pinmux */
+ pex-l2-rst-n {
+ nvidia,pins = "pex_l2_rst_n_pcc6",
+ "pex_l0_rst_n_pdd1",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pex-l2-clkreq-n {
+ nvidia,pins = "pex_l2_clkreq_n_pcc7",
+ "pex_l0_prsnt_n_pdd0",
+ "pex_l0_clkreq_n_pdd2",
+ "pex_wake_n_pdd3",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l2_prsnt_n_pdd7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* SPI pinmux */
+ spi1-mosi-px4 {
+ nvidia,pins = "spi1_mosi_px4",
+ "spi1_sck_px5",
+ "spi1_cs0_n_px6",
+ "spi1_miso_px7";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ spi2-cs1-n-pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ spi2-sck-px2 {
+ nvidia,pins = "spi2_sck_px2";
+ nvidia,function = "spi2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi-a17-pb0 {
+ nvidia,pins = "gmi_a17_pb0",
+ "gmi_a16_pj7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-a18-pb1 {
+ nvidia,pins = "gmi_a18_pb1";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi-a19-pk7 {
+ nvidia,pins = "gmi_a19_pk7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Display A pinmux */
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pclk_pb3",
+ "lcd_pwr1_pc1",
+ "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_vsync_pj4",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_dc0_pn6",
+ "lcd_sdin_pz2";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-cs0-n-pn4 {
+ nvidia,pins = "lcd_cs0_n_pn4",
+ "lcd_sdout_pn5",
+ "lcd_wr_n_pz3";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ blink {
+ nvidia,pins = "clk_32k_out_pa0";
+ nvidia,function = "blink";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* KBC keys */
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-col1-pq1 {
+ nvidia,pins = "kb_row1_pr1",
+ "kb_row3_pr3",
+ "kb_row14_ps6";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col4-pq4 {
+ nvidia,pins = "kb_col4_pq4",
+ "kb_col5_pq5",
+ "kb_col7_pq7",
+ "kb_row2_pr2",
+ "kb_row4_pr4",
+ "kb_row5_pr5",
+ "kb_row12_ps4",
+ "kb_row13_ps5";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-wp-n-pc7 {
+ nvidia,pins = "gmi_wp_n_pc7",
+ "gmi_wait_pi7",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs2_n_pk3";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ vi-pclk-pt0 {
+ nvidia,pins = "vi_pclk_pt0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+
+ /* GPIO keys pinmux */
+ power-key {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ vol-keys {
+ nvidia,pins = "kb_col2_pq2",
+ "kb_col3_pq3";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Bluetooth */
+ bt-shutdown {
+ nvidia,pins = "pu0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ bt-dev-wake {
+ nvidia,pins = "pu1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ bt-host-wake {
+ nvidia,pins = "pu6";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ pu2 {
+ nvidia,pins = "pu2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pu3 {
+ nvidia,pins = "pu3";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pcc1 {
+ nvidia,pins = "pcc1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_vsync_pd6",
+ "vi_hsync_pd7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+ vi-d10-pt2 {
+ nvidia,pins = "vi_d10_pt2",
+ "vi_d0_pt4",
+ "pbb0";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad1_pg1",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_wr_n_pi0",
+ "gmi_oe_n_pi1",
+ "gmi_dqs_pi2",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad13-ph5 {
+ nvidia,pins = "gmi_ad13_ph5";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi-ad10-ph2 {
+ nvidia,pins = "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad14_ph6";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad12-ph4 {
+ nvidia,pins = "gmi_ad12_ph4",
+ "gmi_rst_n_pi4";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* USB2 VBUS control */
+ usb2-vbus-control {
+ nvidia,pins = "gmi_ad15_ph7";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* PWM pinmux */
+ pwm-0 {
+ nvidia,pins = "gmi_ad8_ph0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pwm-2 {
+ nvidia,pins = "pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* S/PDIF pinmux */
+ spdif-out {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ spdif-in {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ vi-d4-pl2 {
+ nvidia,pins = "vi_d4_pl2";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-d6-pl4 {
+ nvidia,pins = "vi_d6_pl4";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ jtag-rtck {
+ nvidia,pins = "jtag_rtck_pu7";
+ nvidia,function = "rtck";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "crt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ clk1-out {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk2-out {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk3-out {
+ nvidia,pins = "clk3_out_pee0";
+ nvidia,function = "extperiph3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ sys-clk-req {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "sysclk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4";
+ nvidia,function = "vgp4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb5 {
+ nvidia,pins = "pbb5";
+ nvidia,function = "vgp5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb6 {
+ nvidia,pins = "pbb6";
+ nvidia,function = "vgp6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5",
+ "clk1_req_pee2";
+ nvidia,function = "dap";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk3-req-pee1 {
+ nvidia,pins = "clk3_req_pee1";
+ nvidia,function = "dev3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "owr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* P1801-T specific pinmux */
+ lcd-pwr2 {
+ nvidia,pins = "lcd_pwr2_pc6",
+ "lcd_dc1_pd2";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-m1 {
+ nvidia,pins = "lcd_m1_pw1";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ key-mode {
+ nvidia,pins = "gmi_cs4_n_pk2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ splashtop {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "nand_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ w8-detect {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "nand_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3";
+ nvidia,function = "vgp3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb7 {
+ nvidia,pins = "pbb7";
+ nvidia,function = "i2s4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ spi2-mosi-px0 {
+ nvidia,pins = "spi2_mosi_px0";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ tp-vendor {
+ nvidia,pins = "kb_row6_pr6",
+ "kb_row7_pr7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ tp-power {
+ nvidia,pins = "kb_row8_ps0";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* GPIO power/drive control */
+ drive-dap1 {
+ nvidia,pins = "drive_dap1",
+ "drive_dap2",
+ "drive_dbg",
+ "drive_at5",
+ "drive_gme",
+ "drive_ddc",
+ "drive_ao1",
+ "drive_uart3";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ };
+ drive-sdio1 {
+ nvidia,pins = "drive_sdio1",
+ "drive_sdio3";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,pull-down-strength = <46>;
+ nvidia,pull-up-strength = <42>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+ };
+ };
+ };
+
+ uartb: serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ reset-names = "serial";
+ /delete-property/ reg-shift;
+ status = "okay";
+
+ /* Broadcom GPS BCM47511 */
+ };
+
+ uartc: serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ reset-names = "serial";
+ /delete-property/ reg-shift;
+ status = "okay";
+
+ /* Azurewave AW-AH691 BCM43241B0 */
+ };
+
+ pwm: pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <280000>;
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Nuvoton NPCE791LA0DX embedded controller */
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ accelerometer@f {
+ compatible = "kionix,kxtf9";
+ reg = <0x0f>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vdd_1v8_vio>;
+ vddio-supply = <&vdd_1v8_vio>;
+
+ mount-matrix = "0", "1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <33000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rt5640: audio-codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+
+ realtek,dmic1-data-pin = <1>;
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+ clock-names = "mclk";
+
+ realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ /* Texas Instruments TPS659110 PMIC */
+ pmic: pmic@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ wakeup-source;
+
+ ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+ ti,system-power-controller;
+ ti,sleep-keep-ck32k;
+ ti,sleep-enable;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_5v0_bat>;
+ vcc2-supply = <&vdd_5v0_bat>;
+ vcc3-supply = <&vdd_1v8_vio>;
+ vcc4-supply = <&vdd_5v0_bat>;
+ vcc5-supply = <&vdd_5v0_bat>;
+ vcc6-supply = <&vddio_ddr>;
+ vcc7-supply = <&vdd_5v0_bat>;
+ vccio-supply = <&vdd_5v0_bat>;
+
+ pmic-sleep-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ regulators {
+ /* vdd1 is not used by Portable AiO */
+
+ vddio_ddr: vdd2 {
+ regulator-name = "vddio_ddr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_cpu: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-coupled-with = <&vdd_core>;
+ regulator-coupled-max-spread = <300000>;
+ regulator-max-step-microvolt = <100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+
+ nvidia,tegra-cpu-regulator;
+ };
+
+ vdd_1v8_vio: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* eMMC VDD */
+ vcore_emmc: ldo1 {
+ regulator-name = "vdd_emmc_core";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* uSD slot VDD */
+ vdd_usd: ldo2 {
+ regulator-name = "vdd_usd";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ /* uSD slot VDDIO */
+ vddio_usd: ldo3 {
+ regulator-name = "vddio_usd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3100000>;
+ };
+
+ ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /* ldo5 is not used by Portable AiO */
+
+ ldo6 {
+ regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7 {
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <8>;
+ };
+
+ ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <8>;
+ };
+ };
+ };
+
+ nct72: temperature-sensor@4c {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&vdd_3v3_sys>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ vdd_core: core-regulator@60 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1770000>;
+ regulator-coupled-with = <&vdd_cpu>;
+ regulator-coupled-max-spread = <300000>;
+ regulator-max-step-microvolt = <100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,enable-vout-discharge;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+
+ nvidia,tegra-core-regulator;
+ };
+ };
+
+ vdd_5v0_bat: regulator-bat {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_cp: regulator-sby {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_sby";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_5v0_sys: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_1v5_ddr: regulator-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_3v3_sys: regulator-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_3v3_com: regulator-com {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ usb2_vbus: regulator-usb2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ hdmi_5v0_sys: regulator-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi_5v0_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ pmc@7000e400 {
+ status = "okay";
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <200>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ core-supply = <&vdd_core>;
+
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x81>;
+ };
+ };
+
+ memory-controller@7000f000 {
+ emc-timings-3 {
+ /* Micron 2GB 800MHz */
+ nvidia,ram-code = <3>;
+
+ timing-25500000 {
+ clock-frequency = <25500000>;
+
+ nvidia,emem-configuration = < 0x00030003 0xc0000020
+ 0x00000001 0x00000001 0x00000002 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+ };
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emem-configuration = < 0x00010003 0xc0000020
+ 0x00000001 0x00000001 0x00000002 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emem-configuration = < 0x00000003 0xc0000030
+ 0x00000001 0x00000001 0x00000003 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emem-configuration = < 0x00000006 0xc0000025
+ 0x00000001 0x00000001 0x00000005 0x00000002
+ 0x00000003 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+ };
+
+ timing-400000000 {
+ clock-frequency = <400000000>;
+
+ nvidia,emem-configuration = < 0x0000000c 0xc0000048
+ 0x00000001 0x00000002 0x00000009 0x00000005
+ 0x00000005 0x00000001 0x00000002 0x00000008
+ 0x00000002 0x00000002 0x00000003 0x00000006
+ 0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+ };
+
+ timing-800000000 {
+ clock-frequency = <800000000>;
+
+ nvidia,emem-configuration = < 0x00000018 0xc0000090
+ 0x00000004 0x00000005 0x00000013 0x0000000c
+ 0x0000000b 0x00000002 0x00000003 0x0000000c
+ 0x00000002 0x00000002 0x00000004 0x00000008
+ 0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+ };
+ };
+ };
+
+ memory-controller@7000f400 {
+ emc-timings-3 {
+ /* Micron 2GB 800MHz */
+ nvidia,ram-code = <3>;
+
+ timing-25500000 {
+ clock-frequency = <25500000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-dyn-self-ref;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000001
+ 0x00000006 0x00000000 0x00000000 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000000
+ 0x00000000 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x00000009
+ 0x0000000b 0x000000c0 0x00000000 0x00000030
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000007 0x00000007
+ 0x00000004 0x00000001 0x00000000 0x00000004
+ 0x00000005 0x000000c7 0x00000006 0x00000006
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-dyn-self-ref;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000002
+ 0x0000000d 0x00000001 0x00000000 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000000
+ 0x00000000 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x00000009
+ 0x0000000b 0x00000181 0x00000000 0x00000060
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x0000000e 0x0000000e
+ 0x00000004 0x00000002 0x00000000 0x00000004
+ 0x00000005 0x0000018e 0x00000006 0x00000006
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-dyn-self-ref;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000004
+ 0x0000001a 0x00000003 0x00000001 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000001
+ 0x00000001 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x00000009
+ 0x0000000b 0x00000303 0x00000000 0x000000c0
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x0000001c 0x0000001c
+ 0x00000004 0x00000004 0x00000000 0x00000004
+ 0x00000005 0x0000031c 0x00000006 0x00000006
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-dyn-self-ref;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000009
+ 0x00000035 0x00000007 0x00000002 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000002
+ 0x00000002 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000006 0x00000004 0x00000009
+ 0x0000000b 0x00000607 0x00000000 0x00000181
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000038 0x00000038
+ 0x00000004 0x00000007 0x00000000 0x00000004
+ 0x00000005 0x00000638 0x00000007 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x004400a4
+ 0x00008000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00020000
+ 0x00000100 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-400000000 {
+ clock-frequency = <400000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200000>;
+ nvidia,emc-mode-reset = <0x80000521>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+ nvidia,emc-configuration = < 0x00000012
+ 0x00000066 0x0000000c 0x00000004 0x00000003
+ 0x00000008 0x00000002 0x0000000a 0x00000004
+ 0x00000004 0x00000002 0x00000001 0x00000000
+ 0x00000004 0x00000006 0x00000004 0x0000000a
+ 0x0000000c 0x00000bf0 0x00000000 0x000002fc
+ 0x00000001 0x00000008 0x00000001 0x00000000
+ 0x00000008 0x0000000f 0x0000006c 0x00000200
+ 0x00000004 0x0000000c 0x00000000 0x00000004
+ 0x00000005 0x00000c30 0x00000000 0x00000004
+ 0x00000000 0x00000000 0x00007088 0x001d0084
+ 0x00008000 0x00044000 0x00044000 0x00044000
+ 0x00044000 0x00044000 0x00044000 0x00044000
+ 0x00044000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00048000 0x00048000 0x00048000
+ 0x00048000 0x000002a0 0x0800013d 0x00000000
+ 0x77fff884 0x01f1f508 0x05057404 0x54000007
+ 0x080001e8 0x08000021 0x00000802 0x00020000
+ 0x00000100 0x0158000c 0xa0f10000 0x00000000
+ 0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+ };
+
+ timing-800000000 {
+ clock-frequency = <800000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200018>;
+ nvidia,emc-mode-reset = <0x80000d71>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000025
+ 0x000000ce 0x0000001a 0x00000009 0x00000005
+ 0x0000000d 0x00000004 0x00000013 0x00000009
+ 0x00000009 0x00000003 0x00000001 0x00000000
+ 0x00000007 0x0000000b 0x00000009 0x0000000b
+ 0x00000012 0x00001820 0x00000000 0x00000608
+ 0x00000003 0x00000012 0x00000001 0x00000000
+ 0x0000000f 0x00000018 0x000000d8 0x00000200
+ 0x00000005 0x00000018 0x00000000 0x00000007
+ 0x00000008 0x00001860 0x0000000c 0x00000004
+ 0x00000000 0x00000000 0x00005088 0xf0070191
+ 0x00008000 0x0000c00a 0x0000000a 0x0000000a
+ 0x0000000a 0x0000000a 0x0000000a 0x0000000a
+ 0x0000000a 0x00018000 0x00018000 0x00018000
+ 0x00018000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x0000000a 0x0000000a 0x0000000a
+ 0x0000000a 0x000002a0 0x0800013d 0x22220000
+ 0x77fff884 0x01f1f501 0x07077404 0x54000000
+ 0x080001e8 0x08000021 0x00000802 0x00020000
+ 0x00000100 0x00f0000c 0xa0f10202 0x00000000
+ 0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+ };
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
+ };
+
+ ahub@70080000 {
+ i2s@70080400 { /* i2s1 */
+ status = "okay";
+ };
+
+ /* BT SCO */
+ i2s@70080600 { /* i2s3 */
+ status = "okay";
+ };
+ };
+
+ sdmmc1: mmc@78000000 {
+ status = "okay";
+
+ /* SDR104 mode unsupported yet */
+ max-frequency = <104000000>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+
+ vmmc-supply = <&vdd_usd>; /* ldo2 */
+ vqmmc-supply = <&vddio_usd>; /* ldo3 */
+ };
+
+ sdmmc3: mmc@78000400 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keep-power-in-suspend;
+ bus-width = <4>;
+ non-removable;
+
+ mmc-pwrseq = <&brcm_wifi_pwrseq>;
+ vmmc-supply = <&vdd_3v3_com>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+
+ /* Azurewave AW-AH691 BCM43241B0 */
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+ };
+
+ sdmmc4: mmc@78000600 {
+ status = "okay";
+ bus-width = <8>;
+
+ non-removable;
+ mmc-ddr-3_3v;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+ };
+
+ /* USB via ASUS connector */
+ usb@7d000000 {
+ compatible = "nvidia,tegra30-udc";
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ nvidia,hssync-start-delay = <0>;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ /* mini-USB port */
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ vbus-supply = <&usb2_vbus>;
+ };
+
+ /* Full size USB */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <&vdd_5v0_bat>;
+ };
+
+ pad_battery: battery-cell {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion-polymer";
+ charge-full-design-microamp-hours = <5136000>;
+ energy-full-design-microwatt-hours = <38000000>;
+ operating-range-celsius = <0 45>;
+ };
+
+ /* Connected to a 18.4" LVDS panel */
+ bridge {
+ compatible = "mstar,tsumu88adt3-lf-1";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ label = "HDMI";
+ type = "a";
+
+ /* low: tablet, high: dock */
+ hpd-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+ ddc-i2c-bus = <&hdmi_ddc>;
+ ddc-en-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+
+ cpus {
+ cpu0: cpu@0 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ cpu1: cpu@1 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ cpu2: cpu@2 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ cpu3: cpu@3 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ switch-docking-station-mode {
+ label = "Mode";
+ gpios = <&gpio TEGRA_GPIO(K, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MODE>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ opp-table-actmon {
+ opp-800000000 {
+ opp-supported-hw = <0x0006>;
+ };
+
+ /delete-node/ opp-900000000;
+ };
+
+ opp-table-emc {
+ opp-800000000-1300 {
+ opp-supported-hw = <0x0006>;
+ };
+
+ /delete-node/ opp-900000000-1350;
+ };
+
+ brcm_wifi_pwrseq: pwrseq-wifi {
+ compatible = "mmc-pwrseq-simple";
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+ clock-names = "ext_clock";
+
+ reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <300>;
+ power-off-delay-us = <300>;
+ };
+
+ sound {
+ compatible = "asus,tegra-audio-rt5640-p1801-t",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "Asus Portable AiO P1801-T RT5642";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL",
+ "Speakers", "SPORP",
+ "Speakers", "SPORN",
+ "Speakers", "SPOLP",
+ "Speakers", "SPOLN",
+ "DMIC1", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+
+ assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+ <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ };
+
+ thermal-zones {
+ /*
+ * NCT72 has two sensors:
+ *
+ * 0: internal that monitors ambient/skin temperature
+ * 1: external that is connected to the CPU's diode
+ *
+ * Ideally we should use userspace thermal governor,
+ * but it's a much more complex solution. The "skin"
+ * zone exists as a simpler solution which prevents
+ * the Portable AiO from getting too hot from a user's
+ * tactile perspective. The CPU zone is intended to
+ * protect silicon from damage.
+ */
+
+ skin-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct72 0>;
+
+ trips {
+ trip0: skin-alert {
+ /* throttle at 57C until temperature drops to 56.8C */
+ temperature = <57000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: skin-crit {
+ /* shut down at 65C */
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct72 1>;
+
+ trips {
+ trip2: cpu-alert {
+ /* throttle at 75C until temperature drops to 74.8C */
+ temperature = <75000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip3: cpu-crit {
+ /* shut down at 90C */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&trip2>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+ model = "Asus VivoTab RT TF600T";
+ compatible = "asus,tf600t", "nvidia,tegra30";
+ chassis-type = "convertible";
+
+ aliases {
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc1; /* uSD slot */
+ mmc2 = &sdmmc3; /* WiFi */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc@7000e000";
+
+ display1 = &hdmi;
+
+ serial1 = &uartc; /* Bluetooth */
+ serial2 = &uartb; /* GPS */
+ };
+
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ */
+ chosen {};
+
+ memory@80000000 {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma@80000000 {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0x80000000 0x30000000>;
+ size = <0x10000000>; /* 256MiB */
+ linux,cma-default;
+ reusable;
+ };
+ };
+
+ host1x@50000000 {
+ hdmi: hdmi@54280000 {
+ status = "okay";
+
+ hdmi-supply = <&hdmi_5v0_sys>;
+ pll-supply = <&vdd_1v8_vio>;
+ vdd-supply = <&vdd_3v3_sys>;
+
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ };
+ };
+
+ vde@6001a000 {
+ assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+ assigned-clock-rates = <408000000>;
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* SDMMC1 pinmux */
+ sdmmc1-clk {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1-cmd {
+ nvidia,pins = "sdmmc1_dat3_py4",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_cmd_pz1";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1-cd {
+ nvidia,pins = "gmi_iordy_pi5";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1-wp {
+ nvidia,pins = "vi_d11_pt3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* SDMMC2 pinmux */
+ vi-d1-pd5 {
+ nvidia,pins = "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d5_pl3",
+ "vi_d7_pl5";
+ nvidia,function = "sdmmc2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ vi-d8-pl6 {
+ nvidia,pins = "vi_d8_pl6",
+ "vi_d9_pl7";
+ nvidia,function = "sdmmc2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+
+ /* SDMMC3 pinmux */
+ sdmmc3-clk {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc3-cmd {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* SDMMC4 pinmux */
+ sdmmc4-clk {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4-cmd {
+ nvidia,pins = "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4-rst-n {
+ nvidia,pins = "sdmmc4_rst_n_pcc3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ cam-mclk {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* I2C pinmux */
+ gen1-i2c {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ gen2-i2c {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "i2c2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ cam-i2c {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ ddc-i2c {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ pwr-i2c {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ hotplug-i2c {
+ nvidia,pins = "pu4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* HDMI pinmux */
+ hdmi-cec {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi-hpd {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* UART-A */
+ ulpi-data0-po1 {
+ nvidia,pins = "ulpi_data0_po1";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi-data1-po2 {
+ nvidia,pins = "ulpi_data1_po2";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi-data5-po6 {
+ nvidia,pins = "ulpi_data5_po6";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi-data7-po0 {
+ nvidia,pins = "ulpi_data7_po0",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data6_po7";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* UART-B */
+ uartb-txd-rts {
+ nvidia,pins = "uart2_txd_pc2",
+ "uart2_rts_n_pj6";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uartb-rxd-cts {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_cts_n_pj5";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* UART-C */
+ uartc-rxd-cts {
+ nvidia,pins = "uart3_cts_n_pa1",
+ "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ uartc-txd-rts {
+ nvidia,pins = "uart3_rts_n_pc0",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* UART-D */
+ ulpi-nxt-py2 {
+ nvidia,pins = "ulpi_nxt_py2";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ulpi-clk-py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* I2S pinmux */
+ dap-i2s0 {
+ nvidia,pins = "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3";
+ nvidia,function = "i2s0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap-i2s1 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5";
+ nvidia,function = "i2s1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap3-fs {
+ nvidia,pins = "dap3_fs_pp0";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap3-din {
+ nvidia,pins = "dap3_din_pp1";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap3-dout {
+ nvidia,pins = "dap3_dout_pp2",
+ "dap3_sclk_pp3";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ dap-i2s3 {
+ nvidia,pins = "dap4_fs_pp4",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_sclk_pp7";
+ nvidia,function = "i2s3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ i2s4 {
+ nvidia,pins = "pbb7";
+ nvidia,function = "i2s4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Sensors pinmux */
+ nct-irq {
+ nvidia,pins = "pcc2";
+ nvidia,function = "i2s4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ hall {
+ nvidia,pins = "pbb6";
+ nvidia,function = "vgp6";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Asus EC pinmux */
+ ec-irqs {
+ nvidia,pins = "kb_row10_ps2",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ec-reqs {
+ nvidia,pins = "kb_col1_pq1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Memory type bootstrap */
+ mem-boostraps {
+ nvidia,pins = "gmi_ad4_pg4",
+ "gmi_ad5_pg5";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* PCI-e pinmux */
+ pex-l2-rst-n {
+ nvidia,pins = "pex_l2_rst_n_pcc6",
+ "pex_l0_rst_n_pdd1",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pex-l2-clkreq-n {
+ nvidia,pins = "pex_l2_clkreq_n_pcc7",
+ "pex_l0_prsnt_n_pdd0",
+ "pex_l0_clkreq_n_pdd2",
+ "pex_wake_n_pdd3",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l2_prsnt_n_pdd7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Display A pinmux */
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pclk_pb3",
+ "lcd_pwr1_pc1",
+ "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_vsync_pj4",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_dc0_pn6",
+ "lcd_sdin_pz2";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-cs0-n-pn4 {
+ nvidia,pins = "lcd_sdout_pn5",
+ "lcd_wr_n_pz3",
+ "lcd_pwr2_pc6",
+ "lcd_dc1_pd2";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ blink {
+ nvidia,pins = "clk_32k_out_pa0";
+ nvidia,function = "blink";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* KBC keys */
+ kb-col0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_row1_pr1",
+ "kb_row3_pr3",
+ "kb_row7_pr7",
+ "kb_row8_ps0";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col5 {
+ nvidia,pins = "kb_col5_pq5",
+ "kb_col7_pq7",
+ "kb_row2_pr2",
+ "kb_row4_pr4",
+ "kb_row5_pr5",
+ "kb_row13_ps5";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_wp_n_pc7",
+ "gmi_wait_pi7",
+ "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs2_n_pk3",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ vi-pclk-pt0 {
+ nvidia,pins = "vi_pclk_pt0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+
+ /* GPIO keys pinmux */
+ power-key {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ vol-keys {
+ nvidia,pins = "kb_col3_pq3",
+ "kb_col4_pq4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Bluetooth */
+ bt-shutdown {
+ nvidia,pins = "pu0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ bt-dev-wake {
+ nvidia,pins = "pu1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ bt-host-wake {
+ nvidia,pins = "pu6";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ pu2 {
+ nvidia,pins = "pu2";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pu3 {
+ nvidia,pins = "pu3";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pcc1 {
+ nvidia,pins = "pcc1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_vsync_pd6",
+ "vi_hsync_pd7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+ vi-d10-pt2 {
+ nvidia,pins = "vi_d10_pt2",
+ "vi_d0_pt4",
+ "pbb0";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad1_pg1",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_wr_n_pi0",
+ "gmi_oe_n_pi1",
+ "gmi_dqs_pi2",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad13-ph5 {
+ nvidia,pins = "gmi_ad13_ph5";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ gmi-ad10-ph2 {
+ nvidia,pins = "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad14_ph6";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad12-ph4 {
+ nvidia,pins = "gmi_ad12_ph4",
+ "gmi_rst_n_pi4",
+ "gmi_cs7_n_pi6";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Vibrator control */
+ vibrator {
+ nvidia,pins = "gmi_ad11_ph3";
+ nvidia,function = "nand";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* PWM pinmux */
+ pwm-0 {
+ nvidia,pins = "gmi_ad8_ph0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pwm-2 {
+ nvidia,pins = "pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ gmi-cs-n {
+ nvidia,pins = "gmi_cs4_n_pk2",
+ "gmi_cs6_n_pi3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Spdif pinmux */
+ spdif-out {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ spdif-in {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ vi-d4-pl2 {
+ nvidia,pins = "vi_d4_pl2";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-d6-pl4 {
+ nvidia,pins = "vi_d6_pl4";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <0>;
+ nvidia,io-reset = <0>;
+ };
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ jtag {
+ nvidia,pins = "jtag_rtck_pu7";
+ nvidia,function = "rtck";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ crt-sync {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "crt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ clk1-out {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk2-out {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk3-out {
+ nvidia,pins = "clk3_out_pee0";
+ nvidia,function = "extperiph3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ sys-clk-req {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "sysclk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ pbb3 {
+ nvidia,pins = "pbb3";
+ nvidia,function = "vgp3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4";
+ nvidia,function = "vgp4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb5 {
+ nvidia,pins = "pbb5";
+ nvidia,function = "vgp5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5",
+ "clk1_req_pee2";
+ nvidia,function = "dap";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ clk3-req-pee1 {
+ nvidia,pins = "clk3_req_pee1";
+ nvidia,function = "dev3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "owr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* GPIO power/drive control */
+ drive-dap1 {
+ nvidia,pins = "drive_dap1",
+ "drive_dap2",
+ "drive_dbg",
+ "drive_at5",
+ "drive_gme",
+ "drive_ddc",
+ "drive_ao1",
+ "drive_uart3";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ };
+ drive-sdio1 {
+ nvidia,pins = "drive_sdio1",
+ "drive_sdio3";
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,pull-down-strength = <46>;
+ nvidia,pull-up-strength = <42>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+ };
+ drive-sdmmc4 {
+ nvidia,pins = "drive_gma",
+ "drive_gmb",
+ "drive_gmc",
+ "drive_gmd";
+ nvidia,pull-down-strength = <9>;
+ nvidia,pull-up-strength = <9>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ };
+ };
+ };
+
+ uartb: serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ reset-names = "serial";
+ /delete-property/ reg-shift;
+ status = "okay";
+
+ /* Broadcom GPS BCM47511 */
+ };
+
+ uartc: serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ reset-names = "serial";
+ /delete-property/ reg-shift;
+ status = "okay";
+
+ nvidia,adjust-baud-rates = <0 9600 100>,
+ <9600 115200 200>,
+ <1000000 4000000 136>;
+
+ /* Azurewave AW-NH665 BCM4330B1 */
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ max-speed = <4000000>;
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+ clock-names = "txco";
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
+ device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+ vbat-supply = <&vdd_3v3_com>;
+ vddio-supply = <&vdd_1v8_vio>;
+ };
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ gen1_i2c: i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* Nuvoton NPCE698LA0BX embedded controller */
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Atmel Maxtouch MXT1664 HID over I2C */
+ touchscreen@4b {
+ compatible = "hid-over-i2c";
+ reg = <0x4b>;
+
+ hid-descr-addr = <0x0000>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vdd_3v3_sys>;
+ vddl-supply = <&vdd_1v8_vio>;
+ };
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* TI TPS61050/61052 Boost Converter */
+ flash-led@33 {
+ compatible = "ti,tps61052";
+ reg = <0x33>;
+
+ led {
+ color = <LED_COLOR_ID_WHITE>;
+ };
+ };
+
+ imu@69 {
+ compatible = "invensense,mpu6050";
+ reg = <0x69>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vdd_3v3_sys>;
+ vddio-supply = <&vdd_1v8_vio>;
+
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
+
+ /* External I2C interface */
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0d>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(D, 5) IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vdd_3v3_sys>;
+ vid-supply = <&vdd_1v8_vio>;
+
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
+ };
+ };
+ };
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <93750>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rt5640: audio-codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+ clock-names = "mclk";
+ };
+
+ /* Texas Instruments TPS659110 PMIC */
+ pmic: pmic@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+ ti,system-power-controller;
+ ti,sleep-keep-ck32k;
+ ti,sleep-enable;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&vdd_5v0_bat>;
+ vcc2-supply = <&vdd_5v0_bat>;
+ vcc3-supply = <&vdd_1v8_vio>;
+ vcc4-supply = <&vdd_5v0_sys>;
+ vcc5-supply = <&vdd_5v0_bat>;
+ vcc6-supply = <&vdd_3v3_sys>;
+ vcc7-supply = <&vdd_5v0_bat>;
+ vccio-supply = <&vdd_5v0_bat>;
+
+ pmic-sleep-hog {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ regulators {
+ vdd_lcd: vdd1 {
+ regulator-name = "vddio_ddr_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <8>;
+ };
+
+ vddio_ddr: vdd2 {
+ regulator-name = "vddio_ddr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_cpu: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-coupled-with = <&vdd_core>;
+ regulator-coupled-max-spread = <300000>;
+ regulator-max-step-microvolt = <100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <1>;
+
+ nvidia,tegra-cpu-regulator;
+ };
+
+ vdd_1v8_vio: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* eMMC VDD */
+ vcore_emmc: ldo1 {
+ regulator-name = "vdd_emmc_core";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* ldo2 and ldo3 are not used by TF600T */
+
+ ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /* uSD slot VDDIO */
+ vddio_usd: ldo5 {
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ avdd_dsi_csi: ldo6 {
+ regulator-name = "avdd_dsi_csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo7 {
+ regulator-name = "vdd_pllm,x,u,a_p_c_s";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <8>;
+ };
+
+ ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ ti,regulator-ext-sleep-control = <8>;
+ };
+ };
+ };
+
+ /* Capella CM3218 ambient light sensor */
+ light-sensor@48 {
+ compatible = "capella,cm32181";
+ reg = <0x48>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&vdd_3v3_als>;
+ };
+
+ nct72: temperature-sensor@4c {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&vdd_3v3_sys>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ vdd_core: core-regulator@60 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1770000>;
+ regulator-coupled-with = <&vdd_cpu>;
+ regulator-coupled-max-spread = <300000>;
+ regulator-max-step-microvolt = <100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,enable-vout-discharge;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+
+ nvidia,tegra-core-regulator;
+ };
+ };
+
+ pmc@7000e400 {
+ status = "okay";
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <200>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ core-supply = <&vdd_core>;
+
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x81>;
+ };
+ };
+
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ flash@1 {
+ compatible = "winbond,w25q32", "jedec,spi-nor";
+ reg = <1>;
+
+ spi-max-frequency = <20000000>;
+ vcc-supply = <&vdd_3v3_sys>;
+ };
+ };
+
+ memory-controller@7000f000 {
+ emc-timings-0 {
+ /* Elpida 2GB 750 MHZ */
+ nvidia,ram-code = <0>;
+
+ timing-25500000 {
+ clock-frequency = <25500000>;
+
+ nvidia,emem-configuration = < 0x00020001 0xc0000010
+ 0x00000001 0x00000001 0x00000002 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0502 0x75e30303 0x001f0000 >;
+ };
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emem-configuration = < 0x00010001 0xc0000010
+ 0x00000001 0x00000001 0x00000002 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0502 0x74e30303 0x001f0000 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emem-configuration = < 0x00000001 0xc0000018
+ 0x00000001 0x00000001 0x00000003 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emem-configuration = < 0x00000003 0xc0000025
+ 0x00000001 0x00000001 0x00000005 0x00000002
+ 0x00000003 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+ };
+
+ timing-375000000 {
+ clock-frequency = <375000000>;
+
+ nvidia,emem-configuration = < 0x00000005 0xc0000044
+ 0x00000001 0x00000002 0x00000009 0x00000005
+ 0x00000005 0x00000001 0x00000002 0x00000008
+ 0x00000002 0x00000002 0x00000003 0x00000006
+ 0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+ };
+
+ timing-750000000 {
+ clock-frequency = <750000000>;
+
+ nvidia,emem-configuration = < 0x0000000b 0xc0000087
+ 0x00000004 0x00000005 0x00000012 0x0000000c
+ 0x0000000b 0x00000002 0x00000003 0x0000000c
+ 0x00000002 0x00000002 0x00000004 0x00000008
+ 0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+ };
+ };
+
+ emc-timings-1 {
+ /* Hynix 2GB 750 MHZ */
+ nvidia,ram-code = <1>;
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emem-configuration = < 0x00010003 0xc0000010
+ 0x00000001 0x00000001 0x00000002 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emem-configuration = < 0x00000003 0xc0000018
+ 0x00000001 0x00000001 0x00000003 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emem-configuration = < 0x00000006 0xc0000025
+ 0x00000001 0x00000001 0x00000005 0x00000002
+ 0x00000003 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+ };
+
+ timing-375000000 {
+ clock-frequency = <375000000>;
+
+ nvidia,emem-configuration = < 0x0000000b 0xc0000044
+ 0x00000001 0x00000002 0x00000009 0x00000005
+ 0x00000005 0x00000001 0x00000002 0x00000008
+ 0x00000002 0x00000002 0x00000003 0x00000006
+ 0x06030202 0x000c0609 0x7086110a 0x001f0000 >;
+ };
+
+ timing-750000000 {
+ clock-frequency = <750000000>;
+
+ nvidia,emem-configuration = < 0x00000016 0xc0000087
+ 0x00000003 0x00000004 0x00000012 0x0000000c
+ 0x0000000b 0x00000002 0x00000003 0x0000000c
+ 0x00000002 0x00000002 0x00000004 0x00000008
+ 0x08040202 0x00150c12 0x710c2213 0x001f0000 >;
+ };
+ };
+
+ emc-timings-2 {
+ /* Micron 2GB 750 MHZ */
+ nvidia,ram-code = <2>;
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emem-configuration = < 0x00010003 0xc0000010
+ 0x00000001 0x00000001 0x00000002 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emem-configuration = < 0x00000003 0xc0000018
+ 0x00000001 0x00000001 0x00000003 0x00000000
+ 0x00000001 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emem-configuration = < 0x00000006 0xc0000025
+ 0x00000001 0x00000001 0x00000005 0x00000002
+ 0x00000003 0x00000001 0x00000003 0x00000008
+ 0x00000002 0x00000001 0x00000002 0x00000006
+ 0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+ };
+
+ timing-375000000 {
+ clock-frequency = <375000000>;
+
+ nvidia,emem-configuration = < 0x0000000b 0xc0000044
+ 0x00000001 0x00000002 0x00000009 0x00000005
+ 0x00000005 0x00000001 0x00000002 0x00000008
+ 0x00000002 0x00000002 0x00000003 0x00000006
+ 0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+ };
+
+ timing-750000000 {
+ clock-frequency = <750000000>;
+
+ nvidia,emem-configuration = < 0x00000016 0xc0000087
+ 0x00000004 0x00000005 0x00000012 0x0000000c
+ 0x0000000b 0x00000003 0x00000003 0x0000000c
+ 0x00000002 0x00000002 0x00000004 0x00000008
+ 0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+ };
+ };
+ };
+
+ memory-controller@7000f400 {
+ emc-timings-0 {
+ /* Elpida 2GB 750 MHZ */
+ nvidia,ram-code = <0>;
+
+ timing-25500000 {
+ clock-frequency = <25500000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000001
+ 0x00000007 0x00000000 0x00000000 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000000
+ 0x00000000 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x0000000a
+ 0x0000000b 0x000000c0 0x00000000 0x00000030
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000008 0x00000008
+ 0x00000004 0x00000001 0x00000000 0x00000004
+ 0x00000005 0x000000c7 0x00000006 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000002
+ 0x0000000f 0x00000001 0x00000000 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000000
+ 0x00000000 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x0000000a
+ 0x0000000b 0x00000181 0x00000000 0x00000060
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000010 0x00000010
+ 0x00000004 0x00000002 0x00000000 0x00000004
+ 0x00000005 0x0000018e 0x00000006 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000004
+ 0x0000001e 0x00000003 0x00000001 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000001
+ 0x00000001 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x0000000a
+ 0x0000000b 0x00000303 0x00000000 0x000000c0
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000020 0x00000020
+ 0x00000004 0x00000004 0x00000000 0x00000004
+ 0x00000005 0x0000031c 0x00000006 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000009
+ 0x0000003d 0x00000007 0x00000002 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000002
+ 0x00000002 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000006 0x00000004 0x0000000a
+ 0x0000000b 0x00000607 0x00000000 0x00000181
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000040 0x00000040
+ 0x00000004 0x00000007 0x00000000 0x00000004
+ 0x00000005 0x00000638 0x00000007 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x004400a4
+ 0x00008000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00020000
+ 0x00000100 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-375000000 {
+ clock-frequency = <375000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200040>;
+ nvidia,emc-mode-reset = <0x80000521>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+ nvidia,emc-configuration = < 0x00000011
+ 0x0000006f 0x0000000c 0x00000004 0x00000003
+ 0x00000008 0x00000002 0x0000000a 0x00000004
+ 0x00000004 0x00000002 0x00000001 0x00000000
+ 0x00000004 0x00000006 0x00000004 0x0000000a
+ 0x0000000c 0x00000b2d 0x00000000 0x000002cb
+ 0x00000001 0x00000008 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000075 0x00000200
+ 0x00000004 0x0000000c 0x00000000 0x00000004
+ 0x00000005 0x00000b6d 0x00000000 0x00000004
+ 0x00000000 0x00000000 0x00007088 0x00200084
+ 0x00008000 0x00034000 0x00034000 0x00034000
+ 0x00034000 0x00014000 0x00014000 0x00014000
+ 0x00014000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00048000 0x00048000 0x00048000
+ 0x00048000 0x000002a0 0x0600013d 0x00000000
+ 0x77fff884 0x01f1f508 0x05057404 0x54000007
+ 0x080001e8 0x06000021 0x00000802 0x00020000
+ 0x00000100 0x0150000c 0xa0f10000 0x00000000
+ 0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+ };
+
+ timing-750000000 {
+ clock-frequency = <750000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200058>;
+ nvidia,emc-mode-reset = <0x80000d71>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000023
+ 0x000000df 0x00000019 0x00000009 0x00000005
+ 0x0000000d 0x00000004 0x00000013 0x00000009
+ 0x00000009 0x00000003 0x00000001 0x00000000
+ 0x00000007 0x0000000b 0x00000009 0x0000000b
+ 0x00000011 0x0000169a 0x00000000 0x000005a6
+ 0x00000003 0x00000010 0x00000001 0x00000000
+ 0x0000000e 0x00000018 0x000000e9 0x00000200
+ 0x00000005 0x00000017 0x00000000 0x00000007
+ 0x00000008 0x000016da 0x0000000c 0x00000004
+ 0x00000000 0x00000000 0x00005088 0xf0080191
+ 0x00008000 0x0000000a 0x0000000a 0x0000000a
+ 0x0000000a 0x00000008 0x00000008 0x00000008
+ 0x00000008 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x0000000a 0x0000000a 0x0000000a
+ 0x0000000a 0x000002a0 0x0600013d 0x22220000
+ 0x77fff884 0x01f1f501 0x07077404 0x54000000
+ 0x080001e8 0x06000021 0x00000802 0x00020000
+ 0x00000100 0x00df000c 0xa0f10000 0x00000000
+ 0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+ };
+ };
+
+ emc-timings-1 {
+ /* Hynix 2GB 750 MHZ */
+ nvidia,ram-code = <1>;
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000002
+ 0x0000000d 0x00000001 0x00000000 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000000
+ 0x00000000 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x0000000a
+ 0x0000000b 0x00000181 0x00000000 0x00000060
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x0000000e 0x0000000e
+ 0x00000004 0x00000002 0x00000000 0x00000004
+ 0x00000005 0x0000018e 0x00000006 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000004
+ 0x0000001a 0x00000003 0x00000001 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000001
+ 0x00000001 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x0000000a
+ 0x0000000b 0x00000303 0x00000000 0x000000c0
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x0000001c 0x0000001c
+ 0x00000004 0x00000004 0x00000000 0x00000004
+ 0x00000005 0x0000031c 0x00000006 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000009
+ 0x00000035 0x00000007 0x00000002 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000002
+ 0x00000002 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000006 0x00000004 0x0000000a
+ 0x0000000b 0x00000607 0x00000000 0x00000181
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000038 0x00000038
+ 0x00000004 0x00000007 0x00000000 0x00000004
+ 0x00000005 0x00000638 0x00000007 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x004400a4
+ 0x00008000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00020000
+ 0x00000100 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-375000000 {
+ clock-frequency = <375000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200040>;
+ nvidia,emc-mode-reset = <0x80000521>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+ nvidia,emc-configuration = < 0x00000011
+ 0x00000060 0x0000000c 0x00000003 0x00000004
+ 0x00000008 0x00000002 0x0000000a 0x00000003
+ 0x00000003 0x00000002 0x00000001 0x00000000
+ 0x00000004 0x00000006 0x00000004 0x0000000a
+ 0x0000000c 0x00000b2d 0x00000000 0x000002cb
+ 0x00000001 0x00000008 0x00000001 0x00000000
+ 0x00000007 0x00000010 0x00000066 0x00000200
+ 0x00000004 0x0000000c 0x00000000 0x00000004
+ 0x00000005 0x00000b6d 0x00000000 0x00000004
+ 0x00000000 0x00000000 0x00007288 0x00200084
+ 0x00008000 0x00044000 0x00044000 0x00044000
+ 0x00044000 0x00014000 0x00014000 0x00014000
+ 0x00014000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00048000 0x00048000 0x00048000
+ 0x00048000 0x000002a0 0x0600013d 0x00000000
+ 0x77fff884 0x01f1f508 0x05057404 0x54000007
+ 0x08000168 0x06000021 0x00000802 0x00020000
+ 0x00000100 0x015f000c 0xa0f10000 0x00000000
+ 0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+ };
+
+ timing-750000000 {
+ clock-frequency = <750000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200058>;
+ nvidia,emc-mode-reset = <0x80000d71>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000023
+ 0x000000c1 0x00000019 0x00000008 0x00000005
+ 0x0000000d 0x00000004 0x00000013 0x00000008
+ 0x00000008 0x00000003 0x00000001 0x00000000
+ 0x00000007 0x0000000b 0x00000009 0x0000000b
+ 0x00000011 0x0000169a 0x00000000 0x000005a6
+ 0x00000003 0x00000010 0x00000001 0x00000000
+ 0x0000000e 0x00000018 0x000000cb 0x00000200
+ 0x00000005 0x00000017 0x00000000 0x00000007
+ 0x00000008 0x000016da 0x0000000c 0x00000004
+ 0x00000000 0x00000000 0x00005088 0xf0080191
+ 0x00008000 0x00008008 0x00000008 0x00000008
+ 0x00000008 0x00000008 0x00000008 0x00000008
+ 0x00000008 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x0000000a 0x0000000a 0x0000000a
+ 0x0000000a 0x000002a0 0x0800013d 0x22220000
+ 0x77fff884 0x01f1f501 0x07077404 0x54000000
+ 0x080001e8 0x08000021 0x00000802 0x00020000
+ 0x00000100 0x00fd000c 0xa0f10000 0x00000000
+ 0x00000000 0x80002d93 0xe8000000 0xff00ff49 >;
+ };
+ };
+
+ emc-timings-2 {
+ /* Micron 2GB 750 MHZ */
+ nvidia,ram-code = <2>;
+
+ timing-51000000 {
+ clock-frequency = <51000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000002
+ 0x00000008 0x00000001 0x00000000 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000000
+ 0x00000000 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x0000000a
+ 0x0000000b 0x00000181 0x00000000 0x00000060
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000009 0x00000009
+ 0x00000004 0x00000002 0x00000000 0x00000004
+ 0x00000005 0x0000018e 0x00000006 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-102000000 {
+ clock-frequency = <102000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000004
+ 0x0000001e 0x00000003 0x00000001 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000001
+ 0x00000001 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000005 0x00000004 0x0000000a
+ 0x0000000b 0x00000303 0x00000000 0x000000c0
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000020 0x00000020
+ 0x00000004 0x00000004 0x00000000 0x00000004
+ 0x00000005 0x0000031c 0x00000006 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x007800a4
+ 0x00008000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x000fc000 0x000fc000 0x000fc000
+ 0x000fc000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00000000
+ 0x00000040 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-204000000 {
+ clock-frequency = <204000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200048>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+ nvidia,emc-cfg-dyn-self-ref;
+
+ nvidia,emc-configuration = < 0x00000009
+ 0x0000003d 0x00000007 0x00000002 0x00000002
+ 0x0000000a 0x00000005 0x0000000b 0x00000002
+ 0x00000002 0x00000003 0x00000001 0x00000000
+ 0x00000005 0x00000006 0x00000004 0x0000000a
+ 0x0000000b 0x00000607 0x00000000 0x00000181
+ 0x00000002 0x00000002 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000040 0x00000040
+ 0x00000004 0x00000007 0x00000000 0x00000004
+ 0x00000005 0x00000638 0x00000007 0x00000004
+ 0x00000000 0x00000000 0x00004288 0x004400a4
+ 0x00008000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00080000 0x00080000 0x00080000
+ 0x00080000 0x000002a0 0x0800211c 0x00000000
+ 0x77fff884 0x01f1f108 0x05057404 0x54000007
+ 0x08000168 0x08000000 0x00000802 0x00020000
+ 0x00000100 0x000c000c 0xa0f10000 0x00000000
+ 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+ };
+
+ timing-375000000 {
+ clock-frequency = <375000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200040>;
+ nvidia,emc-mode-reset = <0x80000521>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+ nvidia,emc-configuration = < 0x00000011
+ 0x0000006f 0x0000000c 0x00000004 0x00000003
+ 0x00000008 0x00000002 0x0000000a 0x00000004
+ 0x00000004 0x00000002 0x00000001 0x00000000
+ 0x00000004 0x00000006 0x00000004 0x0000000a
+ 0x0000000c 0x00000b2d 0x00000000 0x000002cb
+ 0x00000001 0x00000008 0x00000001 0x00000000
+ 0x00000007 0x0000000f 0x00000075 0x00000200
+ 0x00000004 0x0000000c 0x00000000 0x00000004
+ 0x00000005 0x00000b6d 0x00000000 0x00000004
+ 0x00000000 0x00000000 0x00007088 0x00200084
+ 0x00008000 0x00044000 0x00044000 0x00044000
+ 0x00044000 0x00014000 0x00014000 0x00014000
+ 0x00014000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00048000 0x00048000 0x00048000
+ 0x00048000 0x000002a0 0x0800013d 0x00000000
+ 0x77fff884 0x01f1f508 0x05057404 0x54000007
+ 0x080001e8 0x08000021 0x00000802 0x00020000
+ 0x00000100 0x0150000c 0xa0f10000 0x00000000
+ 0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+ };
+
+ timing-750000000 {
+ clock-frequency = <750000000>;
+
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-mode-1 = <0x80100002>;
+ nvidia,emc-mode-2 = <0x80200058>;
+ nvidia,emc-mode-reset = <0x80000d71>;
+ nvidia,emc-zcal-cnt-long = <0x00000040>;
+ nvidia,emc-cfg-periodic-qrst;
+
+ nvidia,emc-configuration = < 0x00000023
+ 0x000000df 0x00000019 0x00000009 0x00000005
+ 0x0000000d 0x00000004 0x00000013 0x00000009
+ 0x00000009 0x00000006 0x00000001 0x00000000
+ 0x00000007 0x0000000b 0x00000009 0x0000000b
+ 0x00000011 0x0000169a 0x00000000 0x000005a6
+ 0x00000003 0x00000010 0x00000001 0x00000000
+ 0x0000000e 0x00000018 0x000000e9 0x00000200
+ 0x00000005 0x00000017 0x00000000 0x00000007
+ 0x00000008 0x000016da 0x0000000c 0x00000004
+ 0x00000000 0x00000000 0x00005088 0xf0080191
+ 0x00008000 0x0000800a 0x0000000a 0x0000000a
+ 0x0000000a 0x00000008 0x00000008 0x00000008
+ 0x00000008 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x007fc00a 0x0000000a 0x0000000a
+ 0x0000000a 0x000002a0 0x0800013d 0x22220000
+ 0x77fff884 0x01f1f501 0x07077404 0x54000000
+ 0x080001e8 0x08000021 0x00000802 0x00020000
+ 0x00000100 0x00df000c 0xa0f10000 0x00000000
+ 0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+ };
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
+ };
+
+ ahub@70080000 {
+ i2s@70080400 { /* i2s1 */
+ status = "okay";
+ };
+
+ /* BT SCO */
+ i2s@70080600 { /* i2s3 */
+ status = "okay";
+ };
+ };
+
+ sdmmc1: mmc@78000000 {
+ status = "okay";
+ bus-width = <4>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+
+ vmmc-supply = <&vdd_3v3_sys>;
+ vqmmc-supply = <&vddio_usd>;
+ };
+
+ sdmmc3: mmc@78000400 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+ assigned-clock-rates = <50000000>;
+
+ max-frequency = <50000000>;
+ keep-power-in-suspend;
+ bus-width = <4>;
+ non-removable;
+
+ mmc-pwrseq = <&brcm_wifi_pwrseq>;
+ vmmc-supply = <&vdd_3v3_com>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+
+ /* Azurewave AW-NH665 BCM4330B1 */
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+ };
+
+ sdmmc4: mmc@78000600 {
+ status = "okay";
+ bus-width = <8>;
+
+ non-removable;
+ mmc-ddr-1_8v;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+ };
+
+ /* USB via ASUS connector */
+ usb@7d000000 {
+ compatible = "nvidia,tegra30-udc";
+ status = "okay";
+ dr_mode = "peripheral";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ nvidia,hssync-start-delay = <0>;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ /* Dock's USB port */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <&vdd_5v0_bat>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_5v0_bl>;
+ pwms = <&pwm 0 71428>;
+
+ brightness-levels = <1 255>;
+ num-interpolated-steps = <254>;
+ default-brightness-level = <15>;
+ };
+
+ pad_battery: battery-pad {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion-polymer";
+ charge-full-design-microamp-hours = <6760000>;
+ energy-full-design-microwatt-hours = <25000000>;
+ operating-range-celsius = <0 45>;
+ };
+
+ dock_battery: battery-dock {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion-polymer";
+ charge-full-design-microamp-hours = <2980000>;
+ energy-full-design-microwatt-hours = <22000000>;
+ operating-range-celsius = <0 45>;
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ cpus {
+ cpu0: cpu@0 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ cpu1: cpu@1 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ cpu2: cpu@2 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ cpu3: cpu@3 {
+ cpu-supply = <&vdd_cpu>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ extcon-keys {
+ compatible = "gpio-keys";
+
+ switch-dock-hall-sensor {
+ label = "Lid sensor";
+ gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ debounce-interval = <500>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ switch-lineout-detect {
+ label = "Audio dock line-out detect";
+ gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LINEOUT_INSERT>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <10>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ haptic-feedback {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&vdd_3v3_sys>;
+ };
+
+ opp-table-actmon {
+ /delete-node/ opp-800000000;
+ /delete-node/ opp-900000000;
+ };
+
+ opp-table-emc {
+ /delete-node/ opp-800000000-1300;
+ /delete-node/ opp-900000000-1350;
+ };
+
+ brcm_wifi_pwrseq: pwrseq-wifi {
+ compatible = "mmc-pwrseq-simple";
+
+ clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+ clock-names = "ext_clock";
+
+ reset-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <300>;
+ power-off-delay-us = <300>;
+ };
+
+ vdd_5v0_bat: regulator-bat {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_cp: regulator-sby {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_sby";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_5v0_sys: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_1v5_ddr: regulator-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_3v3_sys: regulator-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ vdd_3v3_com: regulator-com {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_com";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_3v3_als: regulator-als {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_als";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ gpio = <&gpio TEGRA_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_5v0_bl: regulator-bl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_bat>;
+ };
+
+ hdmi_5v0_sys: regulator-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi_5v0_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ sound {
+ compatible = "asus,tegra-audio-rt5640-tf600t",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "Asus VivoTab RT TF600T RT5640";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL",
+ "Speakers", "SPORP",
+ "Speakers", "SPORN",
+ "Speakers", "SPOLP",
+ "Speakers", "SPOLN",
+ "DMIC1", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+ nvidia,coupled-mic-hp-det;
+
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+
+ assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+ <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+ assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ };
+
+ thermal-zones {
+ /*
+ * NCT72 has two sensors:
+ *
+ * 0: internal that monitors ambient/skin temperature
+ * 1: external that is connected to the CPU's diode
+ *
+ * Ideally we should use userspace thermal governor,
+ * but it's a much more complex solution. The "skin"
+ * zone exists as a simpler solution which prevents
+ * Transformers from getting too hot from a user's
+ * tactile perspective. The CPU zone is intended to
+ * protect silicon from damage.
+ */
+
+ skin-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct72 0>;
+
+ trips {
+ trip0: skin-alert {
+ /* throttle at 57C until temperature drops to 56.8C */
+ temperature = <57000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: skin-crit {
+ /* shut down at 65C */
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&nct72 1>;
+
+ trips {
+ trip2: cpu-alert {
+ /* throttle at 75C until temperature drops to 74.8C */
+ temperature = <75000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip3: cpu-crit {
+ /* shut down at 90C */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&trip2>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
status = "okay";
clock-frequency = <400000>;
+ embedded-controller@10 {
+ compatible = "pegatron,chagall-ec";
+ reg = <0x10>;
+
+ monitored-battery = <&battery>;
+ power-supplies = <&mains>;
+ };
+
/* Wolfson Microelectronics WM8903 audio codec */
wm8903: audio-codec@1a {
compatible = "wlf,wm8903";
default-brightness-level = <15>;
};
+ battery: battery-cell {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion-polymer";
+ charge-full-design-microamp-hours = <3050000>;
+ energy-full-design-microwatt-hours = <23000000>;
+ operating-range-celsius = <0 45>;
+ };
+
/* PMIC has a built-in 32KHz oscillator which is used by PMC */
clk32k_in: clock-32k {
compatible = "fixed-clock";
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2012-2017 <LW@KARO-electronics.de>
* based on imx53-qsb.dts
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx53.dtsi"
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
pinctrl-0 = <&pinctrl_uart2>;
linux,rs485-enabled-at-boot-time;
rs485-rx-during-tx;
- rs485-rts-active-low;
uart-has-rtscts;
status = "okay";
};
flash@0 {
compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
- spi-max-frequency = <50000000>;
reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0xf0000>;
+ label = "u-boot";
+ };
+
+ partition@f0000 {
+ reg = <0xf0000 0x8000>;
+ label = "env";
+ };
+
+ partition@f8000 {
+ reg = <0xf8000 0x8000>;
+ label = "env_redundant";
+ };
+ };
};
};
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+ compatible = "engicam,microgea-imx6ull-bmm",
+ "engicam,microgea-imx6ull", "fsl,imx6ull";
+ model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+ backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <85>;
+ pwms = <&pwm8 0 100000 0>;
+ };
+
+ buzzer {
+ compatible = "pwm-beeper";
+ pwms = <&pwm4 0 1000000 0>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2>;
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_ext_pwr: regulator-ext-pwr {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+ regulator-name = "ext-pwr";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6ull-microgea-bmm-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ codec: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mclk>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks IMX6UL_CLK_CKO>;
+ assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+ <&clks IMX6UL_CLK_CKO2_PODF>,
+ <&clks IMX6UL_CLK_CKO2>,
+ <&clks IMX6UL_CLK_CKO>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+ <&clks IMX6UL_CLK_CKO2_SEL>,
+ <&clks IMX6UL_CLK_CKO2_PODF>,
+ <&clks IMX6UL_CLK_CKO2>;
+ VDDA-supply = <®_3v3>;
+ VDDIO-supply = <®_3v3>;
+ VDDD-supply = <®_1v8>;
+ };
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
+&tsc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ measure-delay-time = <0x9ffff>;
+ pre-charge-time = <0xfff>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <®_3v3>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_can: can-grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_mclk: mclkgrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x13009
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x11008
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
+ pinctrl_tsc: tscgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x000b0
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x000b0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x000b0
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x000b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+};
+
+&iomuxc_snvs {
+ pinctrl_reg_usb1: regusb1grp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059
+ >;
+ };
+
+ pinctrl_reg_usb2: regusb2grp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+
+ pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+ compatible = "engicam,microgea-imx6ull-gtw",
+ "engicam,microgea-imx6ull", "fsl,imx6ull";
+ model = "Engicam MicroGEA i.MX6ULL GTW Board";
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ user-button {
+ label = "User button";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>, <&pinctrl_pwrled>;
+
+ led-0 {
+ gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-1 {
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_hub>;
+ reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ vmmc-supply = <®_3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0b0b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x130b0
+ MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x130b0
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x130b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+};
+
+&iomuxc_snvs {
+ pinctrl_pwrled: ledsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x130b0
+ >;
+ };
+
+ pinctrl_usb_hub: usb_hubgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+ compatible = "engicam,microgea-imx6ull-rmm",
+ "engicam,microgea-imx6ull", "fsl,imx6ull";
+ model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+ backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <85>;
+ pwms = <&pwm8 0 100000 0>;
+ };
+
+ buzzer {
+ compatible = "pwm-beeper";
+ pwms = <&pwm4 0 1000000 0>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2>;
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_ext_pwr: regulator-ext-pwr {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+ regulator-name = "ext-pwr";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6ull-microgea-rmm-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ status = "okay";
+ };
+
+ led-1 {
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ status = "okay";
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ touchscreen: touchscreen@38 {
+ compatible ="edt,edt-ft5306";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ report-rate-hz = <6>;
+ /* settings valid only for Hycon touchscreen */
+ touchscreen-size-x = <1280>;
+ touchscreen-size-y = <800>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ codec: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mclk>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks IMX6UL_CLK_CKO>;
+ assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+ <&clks IMX6UL_CLK_CKO2_PODF>,
+ <&clks IMX6UL_CLK_CKO2>,
+ <&clks IMX6UL_CLK_CKO>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+ <&clks IMX6UL_CLK_CKO2_SEL>,
+ <&clks IMX6UL_CLK_CKO2_PODF>,
+ <&clks IMX6UL_CLK_CKO2>;
+ VDDA-supply = <®_3v3>;
+ VDDIO-supply = <®_3v3>;
+ VDDD-supply = <®_1v8>;
+ };
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ vbus-supply = <®_usb1_vbus>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ vbus-supply = <®_usb2_vbus>;
+ disable-over-current;
+ status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <®_3v3>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_can: can-grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x130b0
+ >;
+ };
+
+ pinctrl_mclk: mclkgrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x13009
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
+ pinctrl_touchscreen: touchgrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x17059
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0
+ MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+};
+
+&iomuxc_snvs {
+ pinctrl_reg_usb1: regusb1grp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059
+ >;
+ };
+
+ pinctrl_reg_usb2: regusb2grp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+
+ pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+ #include "imx6ull.dtsi"
+
+/ {
+ compatible = "engicam,microgea-imx6ull", "fsl,imx6ull";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ local-mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <4000>;
+ reset-deassert-us = <4000>;
+ };
+ };
+};
+
+/* NAND */
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <0>;
+ nand-ecc-step-size = <0>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+};
+
+&iomuxc_snvs {
+ pinctrl_phy_reset: phy-resetgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
+ >;
+ };
+};
};
};
- reg_brcm: regulator-brcm {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_brcm_reg>;
- regulator-name = "brcm_reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <200000>;
- };
-
- reg_bt: regulator-bt {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_bt_reg>;
- enable-active-high;
- gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
- regulator-name = "bt_reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
reg_peri_3p15v: regulator-peri-3p15v {
compatible = "regulator-fixed";
regulator-name = "peri_3p15v_reg";
regulator-always-on;
};
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_brcm_reg>;
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "imx7-sgtl5000";
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_reg>;
+ shutdown-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ max-speed = <3000000>;
+ };
};
&uart6 {
};
&usdhc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
keep-power-in-suspend;
no-1-8-v;
non-removable;
- vmmc-supply = <®_brcm>;
+ mmc-pwrseq = <&sdio_pwrseq>;
status = "okay";
+
+ wifi@0 {
+ compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+ reg = <0>;
+ };
};
&usdhc3 {
<&pcc3 IMX7ULP_CLK_PCTLC>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 0 20>;
+ ngpios = <20>;
};
gpio_ptd: gpio@40af0000 {
<&pcc3 IMX7ULP_CLK_PCTLD>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 32 12>;
+ ngpios = <12>;
};
gpio_pte: gpio@40b00000 {
<&pcc3 IMX7ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 64 16>;
+ ngpios = <16>;
};
gpio_ptf: gpio@40b10000 {
<&pcc3 IMX7ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 96 20>;
+ ngpios = <20>;
};
};
compatible = "nxp,lpc3220-pwm";
reg = <0x4005c000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
+ #pwm-cells = <3>;
assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
status = "disabled";
compatible = "nxp,lpc3220-pwm";
reg = <0x4005c004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
+ #pwm-cells = <3>;
assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
status = "disabled";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "amarula,imx28-rmm", "fsl,imx28";
+ model = "Amarula i.MX28 rmm";
+
+ memory@40000000 {
+ reg = <0x40000000 0x08000000>;
+ device_type = "memory";
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 4 5000000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <255>;
+ power-supply = <®_5v>;
+ };
+
+ beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm 7 100000 0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ led-0 {
+ gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-1 {
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-2 {
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_fec_3v3: regulator-fec-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&fec_3v3_enable_pin>;
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <300000>;
+ vin-supply = <®_5v>;
+ };
+
+ reg_usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_vbus_enable_pin>;
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_enable_pin>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&auart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_2pins_a>;
+ status = "okay";
+};
+
+&auart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart1_pins_a>;
+ status = "okay";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins_a>;
+ status = "okay";
+};
+
+&duart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_b>;
+ status = "okay";
+};
+
+&duart_pins_b {
+ fsl,voltage = <MXS_VOLTAGE_LOW>;
+};
+
+&gpmi {
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ touchscreen: touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&edt_ft5x06_pins &edt_ft5x06_wake_pin>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&lradc {
+ status = "okay";
+};
+
+&mac0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-mode = "rmii";
+ phy-supply = <®_fec_3v3>;
+ phy-handle = <ðphy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ max-speed = <100>;
+ reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <4000>;
+ reset-deassert-us = <4000>;
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ edt_ft5x06_pins: edt-ft5x06@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDY1__GPIO_0_21 /* Reset */
+ MX28_PAD_GPMI_CE3N__GPIO_0_19 /* Interrupt */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ };
+
+ edt_ft5x06_wake_pin: edt-ft5x06-wake@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <MX28_PAD_GPMI_CE2N__GPIO_0_18>;
+ fsl,drive-strength = <MXS_DRIVE_16mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ };
+
+ fec_3v3_enable_pin: fec-3v3-enable@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <MX28_PAD_SPDIF__GPIO_3_27>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ };
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SS1__GPIO_2_20 /* External power */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ };
+
+ leds_pins: leds@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA7__GPIO_2_7
+ MX28_PAD_PWM0__GPIO_3_16
+ MX28_PAD_PWM1__GPIO_3_17
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ };
+
+ usb0_vbus_enable_pin: usb0-vbus-enable@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <MX28_PAD_SSP0_DATA5__GPIO_2_5>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ };
+
+ usb1_vbus_enable_pin: usb1-vbus-enable@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <MX28_PAD_SSP0_DATA6__GPIO_2_6>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pins_a &pwm7_pins_a>;
+ status = "okay";
+};
+
+/* microSD */
+&ssp0 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+ broken-cd;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ pwm7_pins_a: pwm7@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF1_SDATA0__PWM_7
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
lcdif_24bit_pins_a: lcdif-24bit@0 {
reg = <0>;
fsl,pinmux-ids = <
panel: panel {
compatible = "edt,et057090dhu";
backlight = <&bl>;
+ power-supply = <®_3v3>;
port {
panel_in: endpoint {
};
&iomuxc {
- vf610-colibri {
- pinctrl_can_int: can_int {
- fsl,pins = <
- VF610_PAD_PTB21__GPIO_43 0x22ed
- >;
- };
+ pinctrl_can_int: can_intgrp {
+ fsl,pins = <
+ VF610_PAD_PTB21__GPIO_43 0x22ed
+ >;
};
};
};
&iomuxc {
- vf610-colibri {
- pinctrl_flexcan0: can0grp {
- fsl,pins = <
- VF610_PAD_PTB14__CAN0_RX 0x31F1
- VF610_PAD_PTB15__CAN0_TX 0x31F2
- >;
- };
-
- pinctrl_flexcan1: can1grp {
- fsl,pins = <
- VF610_PAD_PTB16__CAN1_RX 0x31F1
- VF610_PAD_PTB17__CAN1_TX 0x31F2
- >;
- };
-
- pinctrl_gpio_ext: gpio_ext {
- fsl,pins = <
- VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
- VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
- VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
- >;
- };
-
- pinctrl_dcu0_1: dcu0grp_1 {
- fsl,pins = <
- VF610_PAD_PTE0__DCU0_HSYNC 0x1902
- VF610_PAD_PTE1__DCU0_VSYNC 0x1902
- VF610_PAD_PTE2__DCU0_PCLK 0x1902
- VF610_PAD_PTE4__DCU0_DE 0x1902
- VF610_PAD_PTE5__DCU0_R0 0x1902
- VF610_PAD_PTE6__DCU0_R1 0x1902
- VF610_PAD_PTE7__DCU0_R2 0x1902
- VF610_PAD_PTE8__DCU0_R3 0x1902
- VF610_PAD_PTE9__DCU0_R4 0x1902
- VF610_PAD_PTE10__DCU0_R5 0x1902
- VF610_PAD_PTE11__DCU0_R6 0x1902
- VF610_PAD_PTE12__DCU0_R7 0x1902
- VF610_PAD_PTE13__DCU0_G0 0x1902
- VF610_PAD_PTE14__DCU0_G1 0x1902
- VF610_PAD_PTE15__DCU0_G2 0x1902
- VF610_PAD_PTE16__DCU0_G3 0x1902
- VF610_PAD_PTE17__DCU0_G4 0x1902
- VF610_PAD_PTE18__DCU0_G5 0x1902
- VF610_PAD_PTE19__DCU0_G6 0x1902
- VF610_PAD_PTE20__DCU0_G7 0x1902
- VF610_PAD_PTE21__DCU0_B0 0x1902
- VF610_PAD_PTE22__DCU0_B1 0x1902
- VF610_PAD_PTE23__DCU0_B2 0x1902
- VF610_PAD_PTE24__DCU0_B3 0x1902
- VF610_PAD_PTE25__DCU0_B4 0x1902
- VF610_PAD_PTE26__DCU0_B5 0x1902
- VF610_PAD_PTE27__DCU0_B6 0x1902
- VF610_PAD_PTE28__DCU0_B7 0x1902
- >;
- };
-
- pinctrl_dspi1: dspi1grp {
- fsl,pins = <
- VF610_PAD_PTD5__DSPI1_CS0 0x33e2
- VF610_PAD_PTD6__DSPI1_SIN 0x33e1
- VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
- VF610_PAD_PTD8__DSPI1_SCK 0x33e2
- >;
- };
-
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTB20__GPIO_42 0x219d
- >;
- };
-
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- VF610_PAD_PTA6__RMII_CLKOUT 0x30d2
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
-
- pinctrl_gpio_bl_on: gpio_bl_on {
- fsl,pins = <
- VF610_PAD_PTC0__GPIO_45 0x22ef
- >;
- };
-
- pinctrl_i2c0: i2c0grp {
- fsl,pins = <
- VF610_PAD_PTB14__I2C0_SCL 0x37ff
- VF610_PAD_PTB15__I2C0_SDA 0x37ff
- >;
- };
-
- pinctrl_i2c0_gpio: i2c0gpiogrp {
- fsl,pins = <
- VF610_PAD_PTB14__GPIO_36 0x37ff
- VF610_PAD_PTB15__GPIO_37 0x37ff
- >;
- };
-
- pinctrl_nfc: nfcgrp {
- fsl,pins = <
- VF610_PAD_PTD23__NF_IO7 0x28df
- VF610_PAD_PTD22__NF_IO6 0x28df
- VF610_PAD_PTD21__NF_IO5 0x28df
- VF610_PAD_PTD20__NF_IO4 0x28df
- VF610_PAD_PTD19__NF_IO3 0x28df
- VF610_PAD_PTD18__NF_IO2 0x28df
- VF610_PAD_PTD17__NF_IO1 0x28df
- VF610_PAD_PTD16__NF_IO0 0x28df
- VF610_PAD_PTB24__NF_WE_B 0x28c2
- VF610_PAD_PTB25__NF_CE0_B 0x28c2
- VF610_PAD_PTB27__NF_RE_B 0x28c2
- VF610_PAD_PTC26__NF_RB_B 0x283d
- VF610_PAD_PTC27__NF_ALE 0x28c2
- VF610_PAD_PTC28__NF_CLE 0x28c2
- >;
- };
-
- pinctrl_pwm0: pwm0grp {
- fsl,pins = <
- VF610_PAD_PTB0__FTM0_CH0 0x1182
- VF610_PAD_PTB1__FTM0_CH1 0x1182
- >;
- };
-
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- VF610_PAD_PTB8__FTM1_CH0 0x1182
- VF610_PAD_PTB9__FTM1_CH1 0x1182
- >;
- };
-
- pinctrl_uart0: uart0grp {
- fsl,pins = <
- VF610_PAD_PTB10__UART0_TX 0x21a2
- VF610_PAD_PTB11__UART0_RX 0x21a1
- VF610_PAD_PTB12__UART0_RTS 0x21a2
- VF610_PAD_PTB13__UART0_CTS 0x21a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- VF610_PAD_PTB4__UART1_TX 0x21a2
- VF610_PAD_PTB5__UART1_RX 0x21a1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- VF610_PAD_PTD0__UART2_TX 0x21a2
- VF610_PAD_PTD1__UART2_RX 0x21a1
- VF610_PAD_PTD2__UART2_RTS 0x21a2
- VF610_PAD_PTD3__UART2_CTS 0x21a1
- >;
- };
-
- pinctrl_usbh1_reg: gpio_usb_vbus {
- fsl,pins = <
- VF610_PAD_PTD4__GPIO_83 0x22ed
- >;
- };
+ pinctrl_flexcan0: can0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__CAN0_RX 0x31F1
+ VF610_PAD_PTB15__CAN0_TX 0x31F2
+ >;
+ };
+
+ pinctrl_flexcan1: can1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__CAN1_RX 0x31F1
+ VF610_PAD_PTB17__CAN1_TX 0x31F2
+ >;
+ };
+
+ pinctrl_gpio_ext: gpio_extgrp {
+ fsl,pins = <
+ VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
+ VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
+ VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
+ >;
+ };
+
+ pinctrl_dcu0_1: dcu01grp {
+ fsl,pins = <
+ VF610_PAD_PTE0__DCU0_HSYNC 0x1902
+ VF610_PAD_PTE1__DCU0_VSYNC 0x1902
+ VF610_PAD_PTE2__DCU0_PCLK 0x1902
+ VF610_PAD_PTE4__DCU0_DE 0x1902
+ VF610_PAD_PTE5__DCU0_R0 0x1902
+ VF610_PAD_PTE6__DCU0_R1 0x1902
+ VF610_PAD_PTE7__DCU0_R2 0x1902
+ VF610_PAD_PTE8__DCU0_R3 0x1902
+ VF610_PAD_PTE9__DCU0_R4 0x1902
+ VF610_PAD_PTE10__DCU0_R5 0x1902
+ VF610_PAD_PTE11__DCU0_R6 0x1902
+ VF610_PAD_PTE12__DCU0_R7 0x1902
+ VF610_PAD_PTE13__DCU0_G0 0x1902
+ VF610_PAD_PTE14__DCU0_G1 0x1902
+ VF610_PAD_PTE15__DCU0_G2 0x1902
+ VF610_PAD_PTE16__DCU0_G3 0x1902
+ VF610_PAD_PTE17__DCU0_G4 0x1902
+ VF610_PAD_PTE18__DCU0_G5 0x1902
+ VF610_PAD_PTE19__DCU0_G6 0x1902
+ VF610_PAD_PTE20__DCU0_G7 0x1902
+ VF610_PAD_PTE21__DCU0_B0 0x1902
+ VF610_PAD_PTE22__DCU0_B1 0x1902
+ VF610_PAD_PTE23__DCU0_B2 0x1902
+ VF610_PAD_PTE24__DCU0_B3 0x1902
+ VF610_PAD_PTE25__DCU0_B4 0x1902
+ VF610_PAD_PTE26__DCU0_B5 0x1902
+ VF610_PAD_PTE27__DCU0_B6 0x1902
+ VF610_PAD_PTE28__DCU0_B7 0x1902
+ >;
+ };
+
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x33e2
+ VF610_PAD_PTD6__DSPI1_SIN 0x33e1
+ VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
+ VF610_PAD_PTD8__DSPI1_SCK 0x33e2
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB20__GPIO_42 0x219d
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKOUT 0x30d2
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_bl_on: gpio_bl_ongrp {
+ fsl,pins = <
+ VF610_PAD_PTC0__GPIO_45 0x22ef
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c0_gpio: i2c0gpiogrp {
+ fsl,pins = <
+ VF610_PAD_PTB14__GPIO_36 0x37ff
+ VF610_PAD_PTB15__GPIO_37 0x37ff
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
+
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1182
+ VF610_PAD_PTB1__FTM0_CH1 0x1182
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ VF610_PAD_PTB8__FTM1_CH0 0x1182
+ VF610_PAD_PTB9__FTM1_CH1 0x1182
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ VF610_PAD_PTB12__UART0_RTS 0x21a2
+ VF610_PAD_PTB13__UART0_CTS 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
+ };
+
+ pinctrl_usbh1_reg: gpio_usb_vbusgrp {
+ fsl,pins = <
+ VF610_PAD_PTD4__GPIO_83 0x22ed
+ >;
};
};
};
&iomuxc {
- vf610-colibri {
- pinctrl_touchctrl_idle: touchctrl_idle {
- fsl,pins = <
- VF610_PAD_PTA18__GPIO_8 0x006d
- VF610_PAD_PTA19__GPIO_9 0x006c
- >;
- };
+ pinctrl_touchctrl_idle: touchctrl_idlegrp {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x006d
+ VF610_PAD_PTA19__GPIO_9 0x006c
+ >;
+ };
- pinctrl_touchctrl_default: touchctrl_default {
- fsl,pins = <
- VF610_PAD_PTA18__ADC0_SE0 0x0040
- VF610_PAD_PTA19__ADC0_SE1 0x0040
- VF610_PAD_PTA16__ADC1_SE0 0x0040
- VF610_PAD_PTB2__ADC1_SE2 0x0040
- >;
- };
+ pinctrl_touchctrl_default: touchctrl_defaultgrp {
+ fsl,pins = <
+ VF610_PAD_PTA18__ADC0_SE0 0x0040
+ VF610_PAD_PTA19__ADC0_SE1 0x0040
+ VF610_PAD_PTA16__ADC1_SE0 0x0040
+ VF610_PAD_PTB2__ADC1_SE2 0x0040
+ >;
+ };
- pinctrl_touchctrl_gpios: touchctrl_gpios {
- fsl,pins = <
- VF610_PAD_PTA23__GPIO_13 0x22e9
- VF610_PAD_PTB23__GPIO_93 0x22e9
- VF610_PAD_PTA22__GPIO_12 0x22e9
- VF610_PAD_PTA11__GPIO_4 0x22e9
- >;
- };
+ pinctrl_touchctrl_gpios: touchctrl_gpiosgrp {
+ fsl,pins = <
+ VF610_PAD_PTA23__GPIO_13 0x22e9
+ VF610_PAD_PTB23__GPIO_93 0x22e9
+ VF610_PAD_PTA22__GPIO_12 0x22e9
+ VF610_PAD_PTA11__GPIO_4 0x22e9
+ >;
};
};
};
};
- bus@40080000 {
- pmu@40089000 {
- compatible = "arm,cortex-a5-pmu";
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&a5_cpu>;
- reg = <0x40089000 0x1000>;
- };
- };
+ };
+ pmu {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a5_cpu>;
+ interrupt-parent = <&mscm_ir>;
};
};
>;
};
- pinctrl_gpio_spi: pinctrl-gpio-spi {
+ pinctrl_gpio_spi: pinctrl-gpio-spigrp {
fsl,pins = <
VF610_PAD_PTB18__GPIO_40 0x1183
VF610_PAD_PTD10__GPIO_89 0x1183
};
&iomuxc {
- vf610-cosmic {
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTB28__GPIO_98 0x219d
- >;
- };
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- VF610_PAD_PTB4__UART1_TX 0x21a2
- VF610_PAD_PTB5__UART1_RX 0x21a1
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
};
};
};
&iomuxc {
- vf610-twr {
- pinctrl_adc0_ad5: adc0ad5grp {
- fsl,pins = <
- VF610_PAD_PTC30__ADC0_SE5 0xa1
- >;
- };
+ pinctrl_adc0_ad5: adc0ad5grp {
+ fsl,pins = <
+ VF610_PAD_PTC30__ADC0_SE5 0xa1
+ >;
+ };
- pinctrl_dspi0: dspi0grp {
- fsl,pins = <
- VF610_PAD_PTB19__DSPI0_CS0 0x1182
- VF610_PAD_PTB20__DSPI0_SIN 0x1181
- VF610_PAD_PTB21__DSPI0_SOUT 0x1182
- VF610_PAD_PTB22__DSPI0_SCK 0x1182
- >;
- };
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTA7__GPIO_134 0x219d
- >;
- };
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
- pinctrl_fec0: fec0grp {
- fsl,pins = <
- VF610_PAD_PTA6__RMII_CLKIN 0x30d1
- VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
- VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
- VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
- VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
- VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
- VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
- VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
- VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
- VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
- >;
- };
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
- pinctrl_i2c0: i2c0grp {
- fsl,pins = <
- VF610_PAD_PTB14__I2C0_SCL 0x30d3
- VF610_PAD_PTB15__I2C0_SDA 0x30d3
- >;
- };
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x30d3
+ VF610_PAD_PTB15__I2C0_SDA 0x30d3
+ >;
+ };
- pinctrl_nfc: nfcgrp {
- fsl,pins = <
- VF610_PAD_PTD31__NF_IO15 0x28df
- VF610_PAD_PTD30__NF_IO14 0x28df
- VF610_PAD_PTD29__NF_IO13 0x28df
- VF610_PAD_PTD28__NF_IO12 0x28df
- VF610_PAD_PTD27__NF_IO11 0x28df
- VF610_PAD_PTD26__NF_IO10 0x28df
- VF610_PAD_PTD25__NF_IO9 0x28df
- VF610_PAD_PTD24__NF_IO8 0x28df
- VF610_PAD_PTD23__NF_IO7 0x28df
- VF610_PAD_PTD22__NF_IO6 0x28df
- VF610_PAD_PTD21__NF_IO5 0x28df
- VF610_PAD_PTD20__NF_IO4 0x28df
- VF610_PAD_PTD19__NF_IO3 0x28df
- VF610_PAD_PTD18__NF_IO2 0x28df
- VF610_PAD_PTD17__NF_IO1 0x28df
- VF610_PAD_PTD16__NF_IO0 0x28df
- VF610_PAD_PTB24__NF_WE_B 0x28c2
- VF610_PAD_PTB25__NF_CE0_B 0x28c2
- VF610_PAD_PTB27__NF_RE_B 0x28c2
- VF610_PAD_PTC26__NF_RB_B 0x283d
- VF610_PAD_PTC27__NF_ALE 0x28c2
- VF610_PAD_PTC28__NF_CLE 0x28c2
- >;
- };
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD31__NF_IO15 0x28df
+ VF610_PAD_PTD30__NF_IO14 0x28df
+ VF610_PAD_PTD29__NF_IO13 0x28df
+ VF610_PAD_PTD28__NF_IO12 0x28df
+ VF610_PAD_PTD27__NF_IO11 0x28df
+ VF610_PAD_PTD26__NF_IO10 0x28df
+ VF610_PAD_PTD25__NF_IO9 0x28df
+ VF610_PAD_PTD24__NF_IO8 0x28df
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
- pinctrl_pwm0: pwm0grp {
- fsl,pins = <
- VF610_PAD_PTB0__FTM0_CH0 0x1582
- VF610_PAD_PTB1__FTM0_CH1 0x1582
- VF610_PAD_PTB2__FTM0_CH2 0x1582
- VF610_PAD_PTB3__FTM0_CH3 0x1582
- >;
- };
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1582
+ VF610_PAD_PTB1__FTM0_CH1 0x1582
+ VF610_PAD_PTB2__FTM0_CH2 0x1582
+ VF610_PAD_PTB3__FTM0_CH3 0x1582
+ >;
+ };
- pinctrl_sai2: sai2grp {
- fsl,pins = <
- VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
- VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
- VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
- VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
- VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
- VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
- VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
- >;
- };
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
+ VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
+ VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
+ VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
+ VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
+ VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
+ VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- VF610_PAD_PTB4__UART1_TX 0x21a2
- VF610_PAD_PTB5__UART1_RX 0x21a1
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- VF610_PAD_PTB6__UART2_TX 0x21a2
- VF610_PAD_PTB7__UART2_RX 0x21a1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTB6__UART2_TX 0x21a2
+ VF610_PAD_PTB7__UART2_RX 0x21a1
+ >;
};
};
pinctrl-0 = <&pinctrl_optical>;
pinctrl-names = "default";
i2c-bus = <&i2c0>;
- los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
- tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
};
supply-voltage-monitor {
>;
};
- pinctrl_leds_debug: pinctrl-leds-debug {
+ pinctrl_leds_debug: pinctrl-leds-debuggrp {
fsl,pins = <
VF610_PAD_PTD3__GPIO_82 0x31c2
VF610_PAD_PTE3__GPIO_108 0x31c2
* I/O14 - OPT1_TX_DIS
* I/O15 - OPT2_TX_DIS
*/
- gpio6: sx1503@20 {
+ gpio6: pinctrl@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
};
&iomuxc {
- pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+ pinctr_atzb_rf_233: pinctrl-atzb-rf-233grp {
fsl,pins = <
VF610_PAD_PTB2__GPIO_24 0x31c2
VF610_PAD_PTE27__GPIO_132 0x33e2
};
- pinctrl_sx1503_20: pinctrl-sx1503-20 {
+ pinctrl_sx1503_20: pinctrl-sx1503-20grp {
fsl,pins = <
VF610_PAD_PTB1__GPIO_23 0x219d
>;
>;
};
- pinctrl_mdio_mux: pinctrl-mdio-mux {
+ pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
fsl,pins = <
VF610_PAD_PTA18__GPIO_8 0x31c2
VF610_PAD_PTA19__GPIO_9 0x31c2
>;
};
- pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+ pinctrl_fec0_phy_int: pinctrl-fec0-phy-intgrp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x219d
>;
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- gpio9: io-expander@20 {
+ gpio9: pinctrl@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>;
i2c-mux@70 {
compatible = "nxp,pca9548";
- pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux@71 {
compatible = "nxp,pca9548";
- pinctrl-names = "default";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
>;
};
- pinctrl_dspi2: dspi2gpio {
+ pinctrl_dspi2: dspi2gpiogrp {
fsl,pins = <
VF610_PAD_PTD30__GPIO_64 0x33e2
VF610_PAD_PTD29__GPIO_65 0x33e1
>;
};
- pinctrl_leds_debug: pinctrl-leds-debug {
+ pinctrl_leds_debug: pinctrl-leds-debuggrp {
fsl,pins = <
VF610_PAD_PTB26__GPIO_96 0x31c2
>;
};
- pinctrl_mdio_mux: pinctrl-mdio-mux {
+ pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
fsl,pins = <
VF610_PAD_PTE27__GPIO_132 0x31c2
VF610_PAD_PTE28__GPIO_133 0x31c2
>;
};
- pinctrl_sx1503_20: pinctrl-sx1503-20 {
+ pinctrl_sx1503_20: pinctrl-sx1503-20grp {
fsl,pins = <
VF610_PAD_PTD31__GPIO_63 0x219d
>;
>;
};
- pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x219d
>;
>;
};
- pinctrl_leds_debug: pinctrl-leds-debug {
+ pinctrl_leds_debug: pinctrl-leds-debuggrp {
fsl,pins = <
VF610_PAD_PTD3__GPIO_82 0x31c2
>;
>;
};
- pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+ pinctrl_gpio_phy9: pinctrl-gpio-phy9grp {
fsl,pins = <
VF610_PAD_PTB24__GPIO_94 0x219d
>;
};
- pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x219d
>;
>;
};
- pinctrl_leds_debug: pinctrl-leds-debug {
+ pinctrl_leds_debug: pinctrl-leds-debuggrp {
fsl,pins = <
VF610_PAD_PTD3__GPIO_82 0x31c2
>;
>;
};
- pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x219d
>;
>;
};
- pinctrl_leds_debug: pinctrl-leds-debug {
+ pinctrl_leds_debug: pinctrl-leds-debuggrp {
fsl,pins = <
VF610_PAD_PTD3__GPIO_82 0x31c2
>;
};
&iomuxc {
- vf610-colibri {
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- VF610_PAD_PTD0__UART2_TX 0x21a2
- VF610_PAD_PTD1__UART2_RX 0x21a1
- VF610_PAD_PTD2__UART2_RTS 0x21a2
- VF610_PAD_PTD3__UART2_CTS 0x21a1
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
};
};
};
&iomuxc {
- vf610-cosmic {
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- VF610_PAD_PTA20__UART3_TX 0x21a2
- VF610_PAD_PTA21__UART3_RX 0x21a1
- >;
- };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
};
};
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
+ ngpios = <32>;
};
gpio1: gpio@4004a000 {
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
+ ngpios = <32>;
};
gpio2: gpio@4004b000 {
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 64 32>;
+ ngpios = <32>;
};
gpio3: gpio@4004c000 {
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
+ ngpios = <32>;
};
gpio4: gpio@4004d000 {
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 128 7>;
+ ngpios = <7>;
};
anatop: anatop@40050000 {
ftm: ftm@400b8000 {
compatible = "fsl,ftm-timer";
- reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+ reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "ftm-evt", "ftm-src",
"ftm-evt-counter-en", "ftm-src-counter-en";
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_PPI 14 0x304>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
cpu@0 {
compatible = "qcom,krait";
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <GIC_PPI 10 0x304>;
+ interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
qcom,no-pc-write;
};
timer@200a000 {
compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
"qcom,msm-timer";
- interrupts = <GIC_PPI 1 0x301>,
- <GIC_PPI 2 0x301>,
- <GIC_PPI 3 0x301>;
+ interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
reg = <0x0200a000 0x100>;
clock-frequency = <27000000>;
clocks = <&sleep_clk>;
chassis-type = "handset";
aliases {
+ mmc0 = &sdhc_1;
serial0 = &blsp1_uart1;
serial1 = &blsp2_uart4;
};
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
- bcrmf@1 {
+ wifi@1 {
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
reg = <1>;
model = "Sony Xperia Z1 Compact";
compatible = "sony,xperia-amami", "qcom,msm8974";
chassis-type = "handset";
+
+ gpio-keys {
+ key-camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ key-camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+ };
};
&smbb {
model = "Sony Xperia Z1";
compatible = "sony,xperia-honami", "qcom,msm8974";
chassis-type = "handset";
+
+ gpio-keys {
+ key-camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ key-camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+ };
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/* Togari uses a different touchscreen compared to other rhine devices */
+/delete-node/ &touchscreen;
+
+/ {
+ model = "Sony Xperia Z Ultra";
+ compatible = "sony,xperia-togari", "qcom,msm8974";
+ chassis-type = "handset";
+};
+
+&pm8941_l23 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+};
/ {
aliases {
+ mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2;
serial0 = &blsp1_uart2;
};
linux,code = <KEY_VOLUMEDOWN>;
};
- key-camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA>;
- };
-
- key-camera-focus {
- label = "camera_focus";
- gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA_FOCUS>;
- };
-
key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
status = "okay";
clock-frequency = <355000>;
- synaptics@2c {
+ touchscreen: synaptics@2c {
compatible = "syna,rmi4-i2c";
reg = <0x2c>;
};
&smbb {
+ usb-charge-current-limit = <1800000>;
+
qcom,fast-charge-safe-current = <1500000>;
qcom,fast-charge-current-limit = <1500000>;
qcom,dc-current-limit = <1800000>;
qcom,board-id = <8 0>;
aliases {
+ mmc0 = &sdhc_1;
serial0 = &blsp1_uart2;
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/pcs-rzn1-miic.h>
#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
debounce-interval = <20>;
gpios = <&pca9698 15 GPIO_ACTIVE_LOW>;
};
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-dbg0 {
+ gpios = <&pca9698 0 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <0>;
+ };
+
+ led-dbg1 {
+ gpios = <&pca9698 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <1>;
+ };
+
+ led-dbg2 {
+ gpios = <&pca9698 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <2>;
+ };
+
+ led-dbg3 {
+ gpios = <&pca9698 3 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <3>;
+ };
+ led-dbg4 {
+ gpios = <&pca9698 4 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <4>;
+ };
+
+ led-dbg5 {
+ gpios = <&pca9698 5 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <5>;
+ };
+
+ led-dbg6 {
+ gpios = <&pca9698 6 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <6>;
+ };
+
+ led-dbg7 {
+ gpios = <&pca9698 7 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DEBUG;
+ function-enumerator = <7>;
+ };
};
};
renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
};
+&ext_rtc_clk {
+ clock-frequency = <32768>;
+};
+
&gmac2 {
status = "okay";
phy-mode = "gmii";
<GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "alarm", "timer", "pps";
- clocks = <&sysctrl R9A06G032_HCLK_RTC>;
- clock-names = "hclk";
+ clocks = <&sysctrl R9A06G032_HCLK_RTC>, <&ext_rtc_clk>;
+ clock-names = "hclk", "xtal";
power-domains = <&sysctrl>;
status = "disabled";
};
phy-mode = "rmii";
phy-handle = <&phy0>;
assigned-clocks = <&cru SCLK_MAC_SRC>;
- assigned-clock-rates= <50000000>;
+ assigned-clock-rates = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&rmii_pins>;
status = "okay";
&i2s0 {
/delete-property/ pinctrl-0;
rockchip,trcm-sync-rx-only;
- pinctrl-0 = <&i2s0m0_sclk_rx>,
- <&i2s0m0_lrck_rx>,
- <&i2s0m0_sdi0>;
+ pinctrl-0 = <&i2s0m0_sclk_rx>,
+ <&i2s0m0_lrck_rx>,
+ <&i2s0m0_sdi0>;
pinctrl-names = "default";
status = "okay";
};
enable-active-high;
};
- i2c_max77836: i2c-gpio-0 {
+ i2c_max77836: i2c-8 {
compatible = "i2c-gpio";
sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
};
- i2c_max77836: i2c-gpio-0 {
+ i2c_max77836: i2c-8 {
compatible = "i2c-gpio";
sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
};
- i2c_max17042_fuel: i2c-gpio-0 {
+ i2c_max17042_fuel: i2c-9 {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
};
};
- i2c_s5k5baf: i2c-gpio-1 {
+ i2c_s5k5baf: i2c-10 {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
};
};
- i2c-gpio-2 {
+ i2c-11 {
compatible = "i2c-gpio";
#address-cells = <1>;
#size-cells = <0>;
color = <LED_COLOR_ID_WHITE>;
};
- i2c_max77693: i2c-gpio-1 {
+ i2c_max77693: i2c-9 {
compatible = "i2c-gpio";
sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_max77693_fuel: i2c-gpio-2 {
+ i2c_max77693_fuel: i2c-10 {
compatible = "i2c-gpio";
sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_magnetometer: i2c-gpio-3 {
+ i2c_magnetometer: i2c-11 {
compatible = "i2c-gpio";
sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_lightsensor: i2c-gpio-4 {
+ i2c_lightsensor: i2c-12 {
compatible = "i2c-gpio";
sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* WiFi model uses CM3323, 3G/LTE use CM36653 */
};
- i2c_bl: i2c-gpio-5 {
+ i2c_bl: i2c-13 {
compatible = "i2c-gpio";
sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
enable-active-high;
};
- i2c_ak8975: i2c-gpio-0 {
+ i2c_ak8975: i2c-13 {
compatible = "i2c-gpio";
sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_cm36651: i2c-gpio-2 {
+ i2c_cm36651: i2c-14 {
compatible = "i2c-gpio";
sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_max77693: i2c-gpio-1 {
+ i2c_max77693: i2c-9 {
compatible = "i2c-gpio";
sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_max77693_fuel: i2c-gpio-3 {
+ i2c_max77693_fuel: i2c-10 {
compatible = "i2c-gpio";
sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c-gpio-4 {
+ i2c-11 {
compatible = "i2c-gpio";
sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c-mhl {
+ i2c-12 {
compatible = "i2c-gpio";
sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
constant-charge-voltage-max-microvolt = <4200000>;
};
- i2c-gpio-1 {
+ i2c-9 {
compatible = "i2c-gpio";
sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c-gpio-2 {
+ i2c-10 {
compatible = "i2c-gpio";
sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c-gpio-3 {
+ i2c-11 {
compatible = "i2c-gpio";
sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c-gpio-4 {
+ i2c-12 {
compatible = "i2c-gpio";
sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
regulator-max-microvolt = <3700000>;
};
- i2c_pmic: i2c-pmic {
+ i2c_pmic: i2c-3 {
compatible = "i2c-gpio";
sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
power-off-delay-us = <500>;
};
- i2c_sound: i2c-gpio-0 {
+ i2c_sound: i2c-3 {
compatible = "i2c-gpio";
sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_accel: i2c-gpio-1 {
+ i2c_accel: i2c-4 {
compatible = "i2c-gpio";
sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_pmic: i2c-gpio-2 {
+ i2c_pmic: i2c-5 {
compatible = "i2c-gpio";
sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_musb: i2c-gpio-3 {
+ i2c_musb: i2c-6 {
compatible = "i2c-gpio";
sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_fuel: i2c-gpio-4 {
+ i2c_fuel: i2c-7 {
compatible = "i2c-gpio";
sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_touchkey: i2c-gpio-5 {
+ i2c_touchkey: i2c-8 {
compatible = "i2c-gpio";
sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_prox: i2c-gpio-6 {
+ i2c_prox: i2c-9 {
compatible = "i2c-gpio";
sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_magnetometer: i2c-gpio-7 {
+ i2c_magnetometer: i2c-10 {
compatible = "i2c-gpio";
sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
};
- i2c_fmradio: i2c-gpio-8 {
+ i2c_fmradio: i2c-11 {
compatible = "i2c-gpio";
sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
enable-active-high;
};
- i2c_pmic: i2c-pmic {
+ i2c_pmic: i2c-3 {
compatible = "i2c-gpio";
sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
};
};
- gmac0: eth@e2000000 {
+ gmac0: ethernet@e2000000 {
phy-mode = "gmii";
status = "okay";
};
status = "disabled";
};
- gmac1: eth@5c400000 {
+ gmac1: ethernet@5c400000 {
compatible = "st,spear600-gmac";
reg = <0x5c400000 0x8000>;
interrupts = <0 95 0x4>;
status = "disabled";
};
- gmac2: eth@5c500000 {
+ gmac2: ethernet@5c500000 {
compatible = "st,spear600-gmac";
reg = <0x5c500000 0x8000>;
interrupts = <0 96 0x4>;
status = "disabled";
};
- gmac3: eth@5c600000 {
+ gmac3: ethernet@5c600000 {
compatible = "st,spear600-gmac";
reg = <0x5c600000 0x8000>;
interrupts = <0 97 0x4>;
status = "disabled";
};
- gmac4: eth@5c700000 {
+ gmac4: ethernet@5c700000 {
compatible = "st,spear600-gmac";
reg = <0x5c700000 0x8000>;
interrupts = <0 98 0x4>;
};
};
- gmac0: eth@e2000000 {
+ gmac0: ethernet@e2000000 {
phy-mode = "rgmii";
status = "okay";
};
status = "disabled";
};
- gmac0: eth@e2000000 {
+ gmac0: ethernet@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
interrupts = <0 33 0x4>,
status = "okay";
};
- gmac: eth@e0800000 {
+ gmac: ethernet@e0800000 {
status = "okay";
};
status = "okay";
};
- gmac: eth@e0800000 {
+ gmac: ethernet@e0800000 {
status = "okay";
};
status = "okay";
};
- gmac: eth@e0800000 {
+ gmac: ethernet@e0800000 {
status = "okay";
};
status = "disabled";
};
- gmac: eth@e0800000 {
+ gmac: ethernet@e0800000 {
compatible = "snps,dwmac-3.40a";
reg = <0xe0800000 0x8000>;
interrupts = <23 22>;
snps,axi-config = <&stmmac_axi_config_1>;
snps,tso;
access-controllers = <&etzpc 48>;
+ nvmem-cells = <ðernet_mac1_address>;
+ nvmem-cell-names = "mac-address";
status = "disabled";
stmmac_axi_config_1: stmmac-axi-config {
snps,axi-config = <&stmmac_axi_config_2>;
snps,tso;
access-controllers = <&etzpc 49>;
+ nvmem-cells = <ðernet_mac2_address>;
+ nvmem-cell-names = "mac-address";
status = "disabled";
stmmac_axi_config_2: stmmac-axi-config {
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
+#include <dt-bindings/regulator/st,stm32mp15-regulator.h>
+
/ {
firmware {
optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
scmi: scmi {
#size-cells = <0>;
scmi_reg11: regulator@0 {
- reg = <0>;
+ reg = <VOLTD_SCMI_REG11>;
regulator-name = "reg11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
scmi_reg18: regulator@1 {
- reg = <1>;
+ reg = <VOLTD_SCMI_REG18>;
regulator-name = "reg18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
scmi_usb33: regulator@2 {
- reg = <2>;
+ reg = <VOLTD_SCMI_USB33>;
regulator-name = "usb33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+ reserved-memory {
+ optee@de000000 {
+ reg = <0xde000000 0x2000000>;
+ no-map;
+ };
+ };
+
+ arm_wdt: watchdog {
+ compatible = "arm,smc-wdt";
+ arm,smc-id = <0xbc000000>;
+ status = "disabled";
+ };
+
+};
+
+&adc {
+ vdd-supply = <&scmi_vdd>;
+ vdda-supply = <&scmi_vdd>;
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+ clocks = <&scmi_clk CK_SCMI_CRYP1>;
+ resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&cs42l51 {
+ VL-supply = <&scmi_v3v3>;
+ VD-supply = <&scmi_v1v8_audio>;
+ VA-supply = <&scmi_v1v8_audio>;
+ VAHP-supply = <&scmi_v1v8_audio>;
+};
+
+&dsi {
+ phy-dsi-supply = <&scmi_reg18>;
+ clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c1 {
+ hdmi-transmitter@39 {
+ iovcc-supply = <&scmi_v3v3_hdmi>;
+ cvcc12-supply = <&scmi_v1v2_hdmi>;
+ };
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+ status = "disabled";
+};
+
+&m4_rproc {
+ /delete-property/ st,syscfg-holdboot;
+ resets = <&scmi_reset RST_SCMI_MCU>,
+ <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+ reset-names = "mcu_rst", "hold_boot";
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&optee {
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&pwr_regulators {
+ vdd-supply = <&scmi_vdd>;
+ vdd_3v3_usbfs-supply = <&scmi_vdd_usb>;
+ status = "disabled";
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi_reguls {
+ scmi_vddcore: regulator@3 {
+ reg = <VOLTD_SCMI_STPMIC1_BUCK1>;
+ regulator-name = "vddcore";
+ };
+
+ scmi_vdd: regulator@5 {
+ reg = <VOLTD_SCMI_STPMIC1_BUCK3>;
+ regulator-name = "vdd";
+ };
+
+ scmi_v3v3: regulator@6 {
+ reg = <VOLTD_SCMI_STPMIC1_BUCK4>;
+ regulator-name = "v3v3";
+ };
+
+ scmi_v1v8_audio: regulator@7 {
+ reg = <VOLTD_SCMI_STPMIC1_LDO1>;
+ regulator-name = "v1v8_audio";
+ };
+
+ scmi_v3v3_hdmi: regulator@8 {
+ reg = <VOLTD_SCMI_STPMIC1_LDO2>;
+ regulator-name = "v3v3_hdmi";
+ };
+
+ scmi_vdd_usb: regulator@a {
+ reg = <VOLTD_SCMI_STPMIC1_LDO4>;
+ regulator-name = "vdd_usb";
+ };
+
+ scmi_vdda: regulator@b {
+ reg = <VOLTD_SCMI_STPMIC1_LDO5>;
+ regulator-name = "vdda";
+ };
+
+ scmi_v1v2_hdmi: regulator@c {
+ reg = <VOLTD_SCMI_STPMIC1_LDO6>;
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ scmi_vbus_otg: regulator@f {
+ reg = <VOLTD_SCMI_STPMIC1_PWR_SW1>;
+ regulator-name = "vbus_otg";
+ };
+
+ scmi_vbus_sw: regulator@10 {
+ reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>;
+ regulator-name = "vbus_sw";
+ };
+};
+
+&sdmmc1 {
+ vmmc-supply = <&scmi_v3v3>;
+};
+
+&sdmmc3 {
+ vmmc-supply = <&scmi_v3v3>;
+};
+
+&usbh_ehci {
+ hub@1 {
+ vdd-supply = <&scmi_v3v3>;
+ };
+};
+
+&usbphyc_port0 {
+ phy-supply = <&scmi_vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&scmi_vdd_usb>;
+};
+
+&vrefbuf {
+ vdda-supply = <&scmi_vdd>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xf.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+#include "stm32mp157f-dk2-scmi.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157F-DK2 Discovery Board";
+ compatible = "st,stm32mp157f-dk2", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = ðernet0;
+ serial3 = &usart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&arm_wdt {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&cryp1 {
+ status = "okay";
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>;
+ reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&scmi_v3v3>;
+ status = "okay";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&dsi_in {
+ remote-endpoint = <<dc_ep1_out>;
+};
+
+&dsi_out {
+ remote-endpoint = <&panel_in>;
+};
+
+&i2c1 {
+ touchscreen@38 {
+ compatible = "focaltech,ft6236";
+ reg = <0x38>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpiof>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ status = "okay";
+ };
+};
+
+/* I2C4 is managed by OP-TEE */
+&i2c4 {
+ status = "disabled";
+
+ /* i2c4 subnodes, which won't be managed by Linux */
+ typec@28 {
+ status = "disabled";
+ connector {
+ status = "disabled";
+ };
+ };
+
+ stpmic@33 {
+ status = "disabled";
+ };
+};
+
+<dc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep1_out: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
+&rtc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_rsvd_pins_a>;
+
+ rtc_lsco_pins_a: rtc-lsco-0 {
+ pins = "out2_rmp";
+ function = "lsco";
+ };
+};
+
+/* Wifi */
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+ non-removable;
+ cap-sdio-irq;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&scmi_v3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_lsco_pins_a>;
+ };
+};
+
+/* Bluetooth */
+&usart2 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&usart2_pins_c>;
+ pinctrl-1 = <&usart2_sleep_pins_c>;
+ pinctrl-2 = <&usart2_idle_pins_c>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+ vbat-supply = <&scmi_v3v3>;
+ vddio-supply = <&scmi_v3v3>;
+ };
+};
+
+/* Since I2C4 is disabled, STUSB1600 is also disabled so there is no Type-C support */
+&usbotg_hs {
+ dr_mode = "peripheral";
+ role-switch-default-mode = "peripheral";
+ /*
+ * Forcing dr_mode = "peripheral"/"role-switch-default-mode = "peripheral";
+ * will cause the pull-up on D+/D- to be raised as soon as the OTG is configured at runtime,
+ * regardless of the presence of VBUS. Notice that on self-powered devices like
+ * stm32mp157f-dk2, this isn't compliant with the USB standard. That's why usbotg_hs is kept
+ * disabled here.
+ */
+ status = "disabled";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&etzpc {
+ cryp1: cryp@54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ access-controllers = <&etzpc 9>;
+ status = "disabled";
+ };
+};
/delete-property/dmas;
/delete-property/dma-names;
- stusb1600@28 {
+ stusb1600: typec@28 {
compatible = "st,stusb1600";
reg = <0x28>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
remote-endpoint = <&cs42l51_tx_endpoint>;
dai-format = "i2s";
mclk-fs = <256>;
+ system-clock-direction-out;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
status = "okay";
clock-frequency = <400000>;
- tps: tps@24 {
+ tps: pmic@24 {
reg = <0x24>;
};
"P9_18 [spi0_d1]",
"P9_17 [spi0_cs0]",
"[mmc0_cd]",
- "P8_42A [ecappwm0]",
+ "P9_42A [ecappwm0]",
"P8_35 [lcd d12]",
"P8_33 [lcd d13]",
"P8_31 [lcd d14]",
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 Bootlin
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ model = "Seeed Studio BeagleBone Green Eco";
+ compatible = "seeed,am335x-bone-green-eco", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&buck1>;
+ };
+ };
+
+ sys_5v: regulator-sys-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "sys_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-always-on;
+ };
+};
+
+&usb0 {
+ interrupts-extended = <&intc 18>;
+ interrupt-names = "mc";
+};
+
+&baseboard_eeprom {
+ vcc-supply = <&v3v3>;
+};
+
+&i2c0 {
+ /delete-node/ pmic@24;
+
+ tps65214: pmic@30 {
+ compatible = "ti,tps65214";
+ reg = <0x30>;
+ buck1-supply = <&sys_5v>;
+ buck2-supply = <&sys_5v>;
+ buck3-supply = <&sys_5v>;
+ ldo1-supply = <&sys_5v>;
+ ldo2-supply = <&sys_5v>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <7>;
+ pinctrl-0 = <&pmic_irq_pins_default>;
+
+ regulators {
+ buck1: buck1 {
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1298500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck2: buck2 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck3: buck3 {
+ regulator-name = "vdds_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "vdd_1v8_1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "vdd_1v8_2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-id";
+ phy-handle = <&dp83867_0>;
+ ti,dual-emac-pvid = <1>;
+};
+
+&mac_sw {
+ pinctrl-0 = <&cpsw_b_default>;
+ pinctrl-1 = <&cpsw_b_sleep>;
+};
+
+&davinci_mdio_sw {
+ /delete-node/ ethernet-phy@0;
+
+ dp83867_0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+ ti,min-output-impedance;
+ ti,dp83867-rxctrl-strap-quirk;
+ };
+};
+
+&am33xx_pinmux {
+ cpsw_b_default: cpsw-b-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+ >;
+ };
+
+ cpsw_b_sleep: cpsw-b-sleep-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+ >;
+ };
+
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(AM335X_PIN_NNMI, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+};
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
- rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ rts-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
rs485-rts-active-high;
rs485-rx-during-tx;
rs485-rts-delay = <1 1>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
- rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ rts-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
rs485-rts-active-high;
rs485-rts-delay = <1 1>;
linux,rs485-enabled-at-boot-time;
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
- rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ rts-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
rs485-rts-active-high;
rs485-rx-during-tx;
rs485-rts-delay = <1 1>;
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
- rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ rts-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
rs485-rts-active-high;
rs485-rx-during-tx;
rs485-rts-delay = <1 1>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
- rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
rs485-rts-active-high;
+ rs485-rx-during-tx;
rs485-rts-delay = <0 0>;
linux,rs485-enabled-at-boot-time;
clock-names = "fck", "phy-clk", "phy-clk-div";
#size-cells = <1>;
#address-cells = <1>;
- ranges = <0x51000000 0x51000000 0x3000>,
- <0x20000000 0x20000000 0x10000000>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
dma-ranges;
/**
* To enable PCI endpoint mode, disable the pcie1_rc
* node and enable pcie1_ep mode.
*/
pcie1_rc: pcie@51000000 {
- reg = <0x51000000 0x2000>,
- <0x51002000 0x14c>,
- <0x20001000 0x2000>;
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 232 0x4>, <0 233 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
- <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
};
pcie1_ep: pcie_ep@51000000 {
- reg = <0x51000000 0x28>,
- <0x51002000 0x14c>,
- <0x51001000 0x28>,
- <0x20001000 0x10000000>;
+ reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
interrupts = <0 232 0x4>;
num-lanes = <1>;
reset-names = "rstctrl";
#size-cells = <1>;
#address-cells = <1>;
- ranges = <0x51800000 0x51800000 0x3000>,
- <0x30000000 0x30000000 0x10000000>;
+ ranges = <0x51800000 0x51800000 0x3000
+ 0x0 0x30000000 0x10000000>;
dma-ranges;
status = "disabled";
pcie2_rc: pcie@51800000 {
- reg = <0x51800000 0x2000>,
- <0x51802000 0x14c>,
- <0x30001000 0x2000>;
+ reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 355 0x4>, <0 356 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
- <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
bus-range = <0x00 0xff>;
#interrupt-cells = <1>;
num-lanes = <1>;
/ {
model = "Benign BV07 Netbook";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
};
&fb {
compatible = "via,vt8500";
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,arm926ej-s";
+ reg = <0x0>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>;
- };
-
aliases {
serial0 = &uart0;
serial1 = &uart1;
interrupts = <43>;
};
- fb: fb@d8050800 {
+ fb: lcd-controller@d800e400 {
compatible = "via,vt8500-fb";
reg = <0xd800e400 0x400>;
interrupts = <12>;
/ {
model = "Wondermedia WM8505 Netbook";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
};
&fb {
compatible = "wm,wm8505";
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,arm926ej-s";
+ reg = <0x0>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>;
- };
-
aliases {
serial0 = &uart0;
serial1 = &uart1;
interrupts = <48>;
};
- sdhc@d800a000 {
+ mmc@d800a000 {
compatible = "wm,wm8505-sdhc";
reg = <0xd800a000 0x400>;
interrupts = <20>, <21>;
/ {
model = "Wondermedia WM8650-MID Tablet";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
};
&fb {
compatible = "wm,wm8650";
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,arm926ej-s";
+ reg = <0x0>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>;
- };
-
aliases {
serial0 = &uart0;
serial1 = &uart1;
interrupts = <43>;
};
- sdhc@d800a000 {
+ mmc@d800a000 {
compatible = "wm,wm8505-sdhc";
reg = <0xd800a000 0x400>;
interrupts = <20>, <21>;
/ {
model = "VIA APC8750";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
};
&pinctrl {
compatible = "wm,wm8750";
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
device_type = "cpu";
compatible = "arm,arm1176jzf";
+ reg = <0x0>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>;
- };
-
aliases {
serial0 = &uart0;
serial1 = &uart1;
interrupts = <48>;
};
- sdhc@d800a000 {
+ mmc@d800a000 {
compatible = "wm,wm8505-sdhc";
reg = <0xd800a000 0x1000>;
interrupts = <20 21>;
brightness-levels = <0 40 60 80 100 130 190 255>;
default-brightness-level = <5>;
};
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
};
&fb {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x0>;
+ next-level-cache = <&l2_cache>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>;
- };
-
aliases {
serial0 = &uart0;
serial1 = &uart1;
interrupts = <48>;
};
- sdhc@d800a000 {
+ mmc@d800a000 {
compatible = "wm,wm8505-sdhc";
reg = <0xd800a000 0x1000>;
interrupts = <20 21>;
reg = <0xd8004000 0x100>;
interrupts = <10>;
};
+
+ l2_cache: cache-controller@d9000000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xd9000000 0x1000>;
+ arm,double-linefill = <1>;
+ arm,dynamic-clock-gating = <1>;
+ arm,shared-override;
+ arm,standby-mode = <1>;
+ cache-level = <2>;
+ cache-unified;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ };
};
};
&i2c0 {
status = "okay";
};
+
+ð {
+ status = "okay";
+};
+
+&gdm1 {
+ status = "okay";
+};
status = "disabled";
};
+
+ eth: ethernet@1fb50000 {
+ compatible = "airoha,en7581-eth";
+ reg = <0 0x1fb50000 0 0x2600>,
+ <0 0x1fb54000 0 0x2000>,
+ <0 0x1fb56000 0 0x2000>;
+ reg-names = "fe", "qdma0", "qdma1";
+
+ resets = <&scuclk EN7581_FE_RST>,
+ <&scuclk EN7581_FE_PDMA_RST>,
+ <&scuclk EN7581_FE_QDMA_RST>,
+ <&scuclk EN7581_XSI_MAC_RST>,
+ <&scuclk EN7581_DUAL_HSI0_MAC_RST>,
+ <&scuclk EN7581_DUAL_HSI1_MAC_RST>,
+ <&scuclk EN7581_HSI_MAC_RST>,
+ <&scuclk EN7581_XFP_MAC_RST>;
+ reset-names = "fe", "pdma", "qdma",
+ "xsi-mac", "hsi0-mac", "hsi1-mac",
+ "hsi-mac", "xfp-mac";
+
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gdm1: ethernet@1 {
+ compatible = "airoha,eth-mac";
+ reg = <1>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
};
};
bias-pull-up;
};
+ rgmii0_pins: rgmii0-pins {
+ pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+ "PH5", "PH6", "PH7", "PH9", "PH10",
+ "PH14", "PH15", "PH16", "PH17", "PH18";
+ function = "emac0";
+ drive-strength = <40>;
+ };
+
+ rmii0_pins: rmii0-pins {
+ pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+ "PH5", "PH6", "PH7", "PH9", "PH10";
+ function = "emac0";
+ drive-strength = <40>;
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB9", "PB10";
function = "uart0";
#size-cells = <0>;
};
+ emac0: ethernet@5020000 {
+ compatible = "allwinner,sun50i-a100-emac",
+ "allwinner,sun50i-a64-emac";
+ reg = <0x5020000 0x10000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ syscon = <&syscon>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
ths: thermal-sensor@5070400 {
compatible = "allwinner,sun50i-a100-ths";
reg = <0x05070400 0x100>;
status = "okay";
};
+&emac0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii0_pins>;
+ phy-handle = <&rmii_phy>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&mdio0 {
+ reset-gpios = <&pio 7 12 GPIO_ACTIVE_LOW>; /* PH12 */
+ reset-delay-us = <2000>;
+ reset-post-delay-us = <2000>;
+
+ rmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
#include <dt-bindings/clock/sun55i-a523-r-ccu.h>
#include <dt-bindings/reset/sun55i-a523-ccu.h>
#include <dt-bindings/reset/sun55i-a523-r-ccu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
+#include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
/ {
interrupt-parent = <&gic>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x40000000>;
+ gpu: gpu@1800000 {
+ compatible = "allwinner,sun55i-a523-mali",
+ "arm,mali-valhall-jm";
+ reg = <0x1800000 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+ clock-names = "core", "bus";
+ power-domains = <&pck600 PD_GPU>;
+ resets = <&ccu RST_BUS_GPU>;
+ status = "disabled";
+ };
+
pio: pinctrl@2000000 {
compatible = "allwinner,sun55i-a523-pinctrl";
reg = <0x2000000 0x800>;
interrupt-controller;
#interrupt-cells = <3>;
- rgmii0_pins: rgmii0-pins {
- pins = "PH0", "PH1", "PH2", "PH3", "PH4",
- "PH5", "PH6", "PH7", "PH9", "PH10",
- "PH14", "PH15", "PH16", "PH17", "PH18";
- allwinner,pinmux = <5>;
- function = "gmac0";
- drive-strength = <40>;
- bias-disable;
- };
-
mmc0_pins: mmc0-pins {
pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
allwinner,pinmux = <2>;
bias-pull-up;
};
+ rgmii0_pins: rgmii0-pins {
+ pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+ "PH5", "PH6", "PH7", "PH9", "PH10",
+ "PH14", "PH15", "PH16", "PH17", "PH18";
+ allwinner,pinmux = <5>;
+ function = "gmac0";
+ drive-strength = <40>;
+ bias-disable;
+ };
+
uart0_pb_pins: uart0-pb-pins {
pins = "PB9", "PB10";
allwinner,pinmux = <2>;
function = "uart0";
};
+
+ /omit-if-no-ref/
+ uart1_pins: uart1-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ allwinner,pinmux = <2>;
+ };
+
+ /omit-if-no-ref/
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ allwinner,pinmux = <2>;
+ };
};
ccu: clock-controller@2001000 {
#reset-cells = <1>;
};
- mmc0: mmc@4020000 {
- compatible = "allwinner,sun55i-a523-mmc",
- "allwinner,sun20i-d1-mmc";
- reg = <0x04020000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
- clock-names = "ahb", "mmc";
- resets = <&ccu RST_BUS_MMC0>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "disabled";
-
- max-frequency = <150000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- cap-sdio-irq;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc@4021000 {
- compatible = "allwinner,sun55i-a523-mmc",
- "allwinner,sun20i-d1-mmc";
- reg = <0x04021000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
- clock-names = "ahb", "mmc";
- resets = <&ccu RST_BUS_MMC1>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- status = "disabled";
-
- max-frequency = <150000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- cap-sdio-irq;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc@4022000 {
- compatible = "allwinner,sun55i-a523-mmc",
- "allwinner,sun20i-d1-mmc";
- reg = <0x04022000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
- clock-names = "ahb", "mmc";
- resets = <&ccu RST_BUS_MMC2>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
- status = "disabled";
-
- max-frequency = <150000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- cap-sdio-irq;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
wdt: watchdog@2050000 {
compatible = "allwinner,sun55i-a523-wdt";
reg = <0x2050000 0x20>;
ranges;
};
+ sid: efuse@3006000 {
+ compatible = "allwinner,sun55i-a523-sid",
+ "allwinner,sun50i-a64-sid";
+ reg = <0x03006000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
gic: interrupt-controller@3400000 {
compatible = "arm,gic-v3";
#address-cells = <1>;
};
};
+ mmc0: mmc@4020000 {
+ compatible = "allwinner,sun55i-a523-mmc",
+ "allwinner,sun20i-d1-mmc";
+ reg = <0x04020000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ status = "disabled";
+
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@4021000 {
+ compatible = "allwinner,sun55i-a523-mmc",
+ "allwinner,sun20i-d1-mmc";
+ reg = <0x04021000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ status = "disabled";
+
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@4022000 {
+ compatible = "allwinner,sun55i-a523-mmc",
+ "allwinner,sun20i-d1-mmc";
+ reg = <0x04022000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ status = "disabled";
+
+ max-frequency = <150000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
usb_otg: usb@4100000 {
compatible = "allwinner,sun55i-a523-musb",
"allwinner,sun8i-a33-musb";
};
};
+ ppu: power-controller@7001400 {
+ compatible = "allwinner,sun55i-a523-ppu";
+ reg = <0x07001400 0x400>;
+ clocks = <&r_ccu CLK_BUS_R_PPU1>;
+ resets = <&r_ccu RST_BUS_R_PPU1>;
+ #power-domain-cells = <1>;
+ };
+
r_ccu: clock-controller@7010000 {
compatible = "allwinner,sun55i-a523-r-ccu";
reg = <0x7010000 0x250>;
};
};
+ pck600: power-controller@7060000 {
+ compatible = "allwinner,sun55i-a523-pck-600";
+ reg = <0x07060000 0x8000>;
+ clocks = <&r_ccu CLK_BUS_R_PPU0>;
+ resets = <&r_ccu RST_BUS_R_PPU0>;
+ #power-domain-cells = <1>;
+ };
+
r_i2c0: i2c@7081400 {
compatible = "allwinner,sun55i-a523-i2c",
"allwinner,sun8i-v536-i2c",
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdc2>;
+ status = "okay";
+};
+
&mdio0 {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdc2>;
+ status = "okay";
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdc2>;
+ status = "okay";
+};
+
&mdio0 {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+
+#include "sun55i-a523.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "OrangePi 4A";
+ compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ext_osc32k: ext-osc32k-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* PWM capable pin, but PWM isn't supported yet. */
+ led {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ };
+ };
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "ext_clock";
+ };
+
+ reg_otg_vbus: regulator-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "otg-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_vcc5v>;
+ gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ enable-active-high;
+ };
+
+ reg_pcie_vcc3v3: regulator-pcie-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-pcie-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_vcc5v>;
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ enable-active-high;
+ };
+
+ reg_usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_vcc5v>;
+ gpio = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
+ enable-active-high;
+ };
+
+ reg_vcc5v: regulator-vcc5v {
+ /* board wide 5V supply from USB type-C port */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <®_dcdc2>;
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_cldo3>;
+ cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <®_dldo1_323>;
+ vqmmc-supply = <®_bldo1>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ bus-width = <8>;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ vmmc-supply = <®_cldo3>;
+ vqmmc-supply = <®_cldo1>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pb-supply = <®_cldo3>; /* via VCC-IO */
+ vcc-pc-supply = <®_cldo1>;
+ vcc-pd-supply = <®_cldo3>;
+ vcc-pe-supply = <®_aldo2>;
+ vcc-pf-supply = <®_cldo3>; /* VCC-IO for 3.3v; VCC-MCSI for 1.8v */
+ vcc-pg-supply = <®_bldo1>;
+ vcc-ph-supply = <®_cldo3>; /* via VCC-IO */
+ vcc-pi-supply = <®_cldo3>;
+ vcc-pj-supply = <®_cldo1>;
+ vcc-pk-supply = <®_cldo1>;
+};
+
+&r_i2c0 {
+ status = "okay";
+
+ axp717: pmic@35 {
+ compatible = "x-powers,axp717";
+ reg = <0x35>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts-extended = <&nmi_intc 0 IRQ_TYPE_LEVEL_LOW>;
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+ vin4-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ /* Supplies the "little" cluster (1.4 GHz cores) */
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-name = "vdd-cpul";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <920000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1160000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-name = "vcc-dram";
+ };
+
+ reg_dcdc4: dcdc4 {
+ /* feeds 3.3V pin on GPIO header */
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vdd-io";
+ };
+
+ aldo1 {
+ /* not actually connected */
+ regulator-name = "avdd-csi";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pe";
+ };
+
+ reg_aldo3: aldo3 {
+ /* supplies the I2C pins for this PMIC */
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl-usb";
+ };
+
+ reg_aldo4: aldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pll-dxco-avcc";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg-wifi";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pm-lpddr";
+ };
+
+ bldo3 {
+ /* not actually connected */
+ regulator-name = "afvcc-csi";
+ };
+
+ bldo4 {
+ /* not actually connected */
+ regulator-name = "dvdd-csi";
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-cvp-pc-lvds-mcsi-pk-efuse-pcie-edp-1v8";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3-csi";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-io-mmc-nand-pd-pi-usb";
+ };
+
+ reg_cldo4: cldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3-phy1-lcd";
+ };
+
+ reg_cpusldo: cpusldo {
+ /* supplies the management core */
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd-cpus-usb-0v9";
+ };
+ };
+ };
+
+ axp323: pmic@36 {
+ compatible = "x-powers,axp323";
+ reg = <0x36>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ status = "okay";
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1_323: aldo1 {
+ /* less capable and shares load with dldo1 */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+ };
+
+ reg_dldo1_323: dldo1 {
+ /* more capable and shares load with aldo1 */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi2";
+ };
+
+ /* Supplies the "big" cluster (1.8 GHz cores) */
+ reg_dcdc1_323: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-name = "vdd-cpub";
+ };
+
+ /* DCDC2 is polyphased with DCDC1 */
+
+ /* Some RISC-V management core related voltage */
+ reg_dcdc3_323: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd-dnr";
+ };
+ };
+ };
+};
+
+&r_pio {
+/*
+ * Specifying the supply would create a circular dependency.
+ *
+ * vcc-pl-supply = <®_aldo3>;
+ */
+ vcc-pm-supply = <®_bldo2>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "lpo";
+ vbat-supply = <®_aldo1_323>;
+ vddio-supply = <®_bldo1>;
+ device-wakeup-gpios = <&r_pio 1 3 GPIO_ACTIVE_HIGH>; /* PM3 */
+ host-wakeup-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ shutdown-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ };
+};
+
+&usb_otg {
+ /*
+ * The OTG controller is connected to one of the type-A ports.
+ * There is a regulator, controlled by a GPIO, to provide VBUS power
+ * to the port, and a VBUSDET GPIO, to detect externally provided
+ * power. But without ID or CC pins there is no real way to do a
+ * runtime role detection.
+ */
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_otg_vbus>;
+ usb0_vbus_det-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ usb1_vbus-supply = <®_usb_vbus>;
+ status = "okay";
+};
cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-frequency = <150000000>;
};
cb_intosc_ls_clk: cb-intosc-ls-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-frequency = <300000000>;
};
f2s_free_clk: f2s-free-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
+ status = "disabled";
};
osc1: osc1 {
rst: rstmgr@ffd11000 {
#reset-cells = <1>;
- compatible = "altr,stratix10-rst-mgr";
+ compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
reg = <0xffd11000 0x1000>;
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
- phy-addr = <0xffffffff>;
};
&gmac2 {
status = "okay";
};
-&rst {
- altr,modrst-offset = <0x20>;
-};
-
&sysmgr {
reg = <0xffd12000 0x1000>;
interrupts = <0x0 0x10 0x4>;
- cpu1-start-addr = <0xffd06230>;
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
/ {
cpus {
#address-cells = <2>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ periphs_pinctrl: pinctrl@4000 {
+ compatible = "amlogic,pinctrl-s6";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+ gpioz: gpio@c0 {
+ reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+ };
+
+ gpiox: gpio@100 {
+ reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+ };
+
+ gpioh: gpio@140 {
+ reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 9>;
+ };
+
+ gpiod: gpio@180 {
+ reg = <0 0x180 0 0x20>, <0 0x8 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 7>;
+ };
+
+ gpiof: gpio@1a0 {
+ reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_F<<8) 5>;
+ };
+
+ gpioe: gpio@1c0 {
+ reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 3>;
+ };
+
+ gpioc: gpio@200 {
+ reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+ };
+
+ gpiob: gpio@240 {
+ reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+ };
+
+ gpioa: gpio@280 {
+ reg = <0 0x280 0 0x20>, <0 0x40 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 16>;
+ };
+
+ test_n: gpio@2c0 {
+ reg = <0 0x2c0 0 0x20>;
+ reg-names = "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges =
+ <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+
+ gpiocc: gpio@300 {
+ reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+ };
+ };
};
};
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
/ {
cpus {
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ periphs_pinctrl: pinctrl@4000 {
+ compatible = "amlogic,pinctrl-s7";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+ gpioz: gpio@c0 {
+ reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+ };
+
+ gpiox: gpio@100 {
+ reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+ };
+
+ gpioh: gpio@140 {
+ reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+ };
+
+ gpiod: gpio@180 {
+ reg = <0 0x180 0 0x20>, <0 0x40 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 12>;
+ };
+
+ gpioe: gpio@1c0 {
+ reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+ };
+
+ gpioc: gpio@200 {
+ reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+ };
+
+ gpiob: gpio@240 {
+ reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+ };
+
+ test_n: gpio@2c0 {
+ reg = <0 0x2c0 0 0x20>;
+ reg-names = "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges =
+ <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+
+ gpiocc: gpio@300 {
+ reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+ };
+ };
};
};
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
/ {
cpus {
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+
+ periphs_pinctrl: pinctrl@4000 {
+ compatible = "amlogic,pinctrl-s7d",
+ "amlogic,pinctrl-s7";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>;
+
+ gpioz: gpio@c0 {
+ reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>;
+ };
+
+ gpiox: gpio@100 {
+ reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+ };
+
+ gpioh: gpio@140 {
+ reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>;
+ };
+
+ gpiod: gpio@180 {
+ reg = <0 0x180 0 0x20>, <0 0x40 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 5>;
+ };
+
+ gpioe: gpio@1c0 {
+ reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+ };
+
+ gpioc: gpio@200 {
+ reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>;
+ };
+
+ gpiob: gpio@240 {
+ reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+ };
+
+ gpiodv: gpio@280 {
+ reg = <0 0x280 0 0x20>, <0 0x8 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_DV<<8) 7>;
+ };
+
+ test_n: gpio@2c0 {
+ reg = <0 0x2c0 0 0x20>;
+ reg-names = "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges =
+ <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+
+ gpiocc: gpio@300 {
+ reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>;
+ };
+ };
};
};
};
phy-names = "usb2-phy0", "usb2-phy1";
};
*/
+
+&npu {
+ status = "okay";
+};
&pwm_ab {
pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>;
};
+
+&npu {
+ status = "okay";
+};
clock-names = "ext_clock";
};
- cvbs-connector {
+ cvbs_connector: cvbs-connector {
compatible = "composite-video-connector";
port {
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
- brcmf: brcmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Debug UART (3.3V, 115200 baud) at the corner of the board:
+ * (4) (3) (2) [1]
+ * Vcc RXD TXD GND
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+ compatible = "ugoos,am3", "amlogic,s912", "amlogic,meson-gxm";
+ model = "Ugoos AM3";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1710000>;
+
+ button-function {
+ label = "Update";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+};
+
+&cvbs_connector {
+ /* Not used on this board */
+ status = "disabled";
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>;
+ pinctrl-names = "default";
+
+ /* Select external PHY by default */
+ phy-handle = <&external_phy>;
+
+ amlogic,tx-delay-ns = <2>;
+
+ /* External PHY is in RGMII */
+ phy-mode = "rgmii";
+
+ status = "okay";
+};
+
+&external_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_15 */
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c_B {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_b_pins>;
+
+ rtc: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ };
+};
+
+/* WLAN: Atheros 10k (QCA9377) */
+&sd_emmc_a {
+ max-frequency = <200000000>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ max-frequency = <100000000>;
+};
};
/delete-node/ &pmgr_south;
+
+&gpu {
+ compatible = "apple,agx-g13s";
+};
};
};
};
+
+&gpu {
+ compatible = "apple,agx-g13c", "apple,agx-g13s";
+};
// On t6002, the die0 GPU power domain needs both AFR power domains
power-domains = <&ps_afr>, <&ps_afr_die1>;
};
+
+&gpu {
+ compatible = "apple,agx-g13d", "apple,agx-g13s";
+};
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ gpu = &gpu;
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
#clock-cells = <0>;
clock-output-names = "nco_ref";
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpu_globals: globals {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_a: hw-cal-a {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_b: hw-cal-b {
+ status = "disabled";
+ };
+
+ uat_handoff: uat-handoff {
+ status = "disabled";
+ };
+
+ uat_pagetables: uat-pagetables {
+ status = "disabled";
+ };
+
+ uat_ttbs: uat-ttbs {
+ status = "disabled";
+ };
+ };
};
reg = <0x6001 0x1>;
};
- boot_error_count: boot-error-count@6002 {
+ boot_error_count: boot-error-count@6002,0 {
reg = <0x6002 0x1>;
bits = <0 4>;
};
- panic_count: panic-count@6002 {
+ panic_count: panic-count@6002,4 {
reg = <0x6002 0x1>;
bits = <4 4>;
};
reg = <0x6003 0x1>;
};
- shutdown_flag: shutdown-flag@600f {
+ shutdown_flag: shutdown-flag@600f,3 {
reg = <0x600f 0x1>;
bits = <3 1>;
};
#sound-dai-cells = <1>;
};
+ gpu: gpu@406400000 {
+ compatible = "apple,agx-g13s";
+ reg = <0x4 0x6400000 0 0x40000>,
+ <0x4 0x4000000 0 0x1000000>;
+ reg-names = "asc", "sgx";
+ mboxes = <&agx_mbox>;
+ power-domains = <&ps_gfx>;
+ memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+ <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+ memory-region-names = "ttbs", "pagetables", "handoff",
+ "hw-cal-a", "hw-cal-b", "globals";
+
+ apple,firmware-abi = <0 0 0>;
+ };
+
+ agx_mbox: mbox@406408000 {
+ compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x4 0x6408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 0 1059 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1060 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1061 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 0 1062 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
pcie0_dart_0: iommu@581008000 {
compatible = "apple,t6000-dart";
reg = <0x5 0x81008000 0x0 0x4000>;
/dts-v1/;
#include "t8012-jxxx.dtsi"
+#include "t8012-touchbar.dtsi"
/ {
model = "Apple T2 MacBookPro15,2 (j132)";
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ gpu = &gpu;
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
clock-output-names = "nco_ref";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpu_globals: globals {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_a: hw-cal-a {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_b: hw-cal-b {
+ status = "disabled";
+ };
+
+ uat_handoff: uat-handoff {
+ status = "disabled";
+ };
+
+ uat_pagetables: uat-pagetables {
+ status = "disabled";
+ };
+
+ uat_ttbs: uat-ttbs {
+ status = "disabled";
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
ranges;
nonposted-mmio;
+ gpu: gpu@206400000 {
+ compatible = "apple,agx-g13g";
+ reg = <0x2 0x6400000 0 0x40000>,
+ <0x2 0x4000000 0 0x1000000>;
+ reg-names = "asc", "sgx";
+ mboxes = <&agx_mbox>;
+ power-domains = <&ps_gfx>;
+ memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+ <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+ memory-region-names = "ttbs", "pagetables", "handoff",
+ "hw-cal-a", "hw-cal-b", "globals";
+
+ apple,firmware-abi = <0 0 0>;
+ };
+
+ agx_mbox: mbox@206408000 {
+ compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x2 0x6408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 575 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 576 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 577 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 578 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
cpufreq_e: performance-controller@210e20000 {
compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
reg = <0x2 0x10e20000 0 0x1000>;
reg = <0x9f01 0x1>;
};
- boot_error_count: boot-error-count@9f02 {
+ boot_error_count: boot-error-count@9f02,0 {
reg = <0x9f02 0x1>;
bits = <0 4>;
};
- panic_count: panic-count@9f02 {
+ panic_count: panic-count@9f02,4 {
reg = <0x9f02 0x1>;
bits = <4 4>;
};
reg = <0x9f03 0x1>;
};
- shutdown_flag: shutdown-flag@9f0f {
+ shutdown_flag: shutdown-flag@9f0f,3 {
reg = <0x9f0f 0x1>;
bits = <3 1>;
};
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ gpu = &gpu;
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
clock-output-names = "nco_ref";
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpu_globals: globals {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_a: hw-cal-a {
+ status = "disabled";
+ };
+
+ gpu_hw_cal_b: hw-cal-b {
+ status = "disabled";
+ };
+
+ uat_handoff: uat-handoff {
+ status = "disabled";
+ };
+
+ uat_pagetables: uat-pagetables {
+ status = "disabled";
+ };
+
+ uat_ttbs: uat-ttbs {
+ status = "disabled";
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
ranges;
nonposted-mmio;
+ gpu: gpu@206400000 {
+ compatible = "apple,agx-g14g";
+ reg = <0x2 0x6400000 0 0x40000>,
+ <0x2 0x4000000 0 0x1000000>;
+ reg-names = "asc", "sgx";
+ mboxes = <&agx_mbox>;
+ power-domains = <&ps_gfx>;
+ memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+ <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+ memory-region-names = "ttbs", "pagetables", "handoff",
+ "hw-cal-a", "hw-cal-b", "globals";
+
+ apple,firmware-abi = <0 0 0>;
+ };
+
+ agx_mbox: mbox@206408000 {
+ compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+ reg = <0x2 0x6408000 0x0 0x4000>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 709 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 710 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 711 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 712 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "send-empty", "send-not-empty",
+ "recv-empty", "recv-not-empty";
+ #mbox-cells = <0>;
+ };
+
cpufreq_e: cpufreq@210e20000 {
compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
reg = <0x2 0x10e20000 0 0x1000>;
reg = <0xf701 0x1>;
};
- boot_error_count: boot-error-count@f702 {
+ boot_error_count: boot-error-count@f702,0 {
reg = <0xf702 0x1>;
bits = <0 4>;
};
- panic_count: panic-count@f702 {
+ panic_count: panic-count@f702,4 {
reg = <0xf702 0x1>;
bits = <4 4>;
};
reg = <0xf703 0x1>;
};
- shutdown_flag: shutdown-flag@f70f {
+ shutdown_flag: shutdown-flag@f70f,3 {
reg = <0xf70f 0x1>;
bits = <3 1>;
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ax3000.dtsi"
+
+/ {
+ model = "Axiado AX3000 EVK";
+ compatible = "axiado,ax3000-evk", "axiado,ax3000";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* Cortex-A53 will use following memory map */
+ reg = <0x00000000 0x3d000000 0x00000000 0x23000000>,
+ <0x00000004 0x00000000 0x00000000 0x80000000>;
+ };
+};
+
+/* GPIO bank 0 - 7 */
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&gpio6 {
+ status = "okay";
+};
+
+&gpio7 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x3c0013a0 0x00000008; /* cpu-release-addr */
+/ {
+ model = "Axiado AX3000";
+ interrupt-parent = <&gic500>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x100000>;
+ cache-unified;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ };
+ };
+
+ clocks {
+ clk_xin: clock-200000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "clk_xin";
+ };
+
+ refclk: clock-125000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic500>;
+
+ gic500: interrupt-controller@80300000 {
+ compatible = "arm,gic-v3";
+ reg = <0x00 0x80300000 0x00 0x10000>,
+ <0x00 0x80380000 0x00 0x80000>;
+ ranges;
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* GPIO Controller banks 0 - 7 */
+ gpio0: gpio-controller@80500000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80500000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio-controller@80580000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80580000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio2: gpio-controller@80600000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80600000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio3: gpio-controller@80680000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80680000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio4: gpio-controller@80700000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80700000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio5: gpio-controller@80780000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80780000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio6: gpio-controller@80800000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80800000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio7: gpio-controller@80880000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80880000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ /* I3C Controller 0 - 16 */
+ i3c0: i3c@80500400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80500400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c1: i3c@80500800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80500800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c2: i3c@80580400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80580400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c3: i3c@80580800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80580800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c4: i3c@80600400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80600400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c5: i3c@80600800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80600800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c6: i3c@80680400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80680400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c7: i3c@80680800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80680800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c8: i3c@80700400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80700400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c9: i3c@80700800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80700800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c10: i3c@80780400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80780400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c11: i3c@80780800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80780800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c12: i3c@80800400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80800400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c13: i3c@80800800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80800800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c14: i3c@80880400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80880400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c15: i3c@80880800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80880800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c16: i3c@80620400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80620400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@80520000 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x80520000 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+
+ uart1: serial@805a0000 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x805A0000 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+
+ uart2: serial@80620000 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x80620000 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+
+ uart3: serial@80520800 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x80520800 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "bcm2712.dtsi"
+
+/ {
+ compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
+ model = "Raspberry Pi 5";
+
+ aliases {
+ serial10 = &uart10;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial10:115200n8";
+ };
+
+ clk_rp1_xosc: clock-50000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "rp1-xosc";
+ clock-frequency = <50000000>;
+ };
+
+ /* Will be filled by the bootloader */
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0 0x28000000>;
+ };
+
+ sd_io_1v8_reg: sd-io-1v8-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-sd-io";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-settling-time-us = <5000>;
+ gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
+ states = <1800000 1>,
+ <3300000 0>;
+ };
+
+ sd_vcc_reg: sd-vcc-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
+ * labeled "UART", i.e. the interface with the system console.
+ */
+&uart10 {
+ status = "okay";
+};
+
+/* SDIO1 is used to drive the SD card */
+&sdio1 {
+ vqmmc-supply = <&sd_io_1v8_reg>;
+ vmmc-supply = <&sd_vcc_reg>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+};
+
+&soc {
+ firmware: firmware {
+ compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mboxes = <&mailbox>;
+ dma-ranges;
+
+ firmware_clocks: clocks {
+ compatible = "raspberrypi,firmware-clocks";
+ #clock-cells = <1>;
+ };
+
+ reset: reset {
+ compatible = "raspberrypi,firmware-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ power: power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <&firmware>;
+ #power-domain-cells = <1>;
+ };
+};
+
+&hvs {
+ clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
+ clock-names = "core", "disp";
+};
+
+&hdmi0 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&hdmi1 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "bcm2712.dtsi"
-
-/ {
- compatible = "raspberrypi,5-model-b", "brcm,bcm2712";
- model = "Raspberry Pi 5";
-
- aliases {
- serial10 = &uart10;
- };
-
- chosen: chosen {
- stdout-path = "serial10:115200n8";
- };
-
- /* Will be filled by the bootloader */
- memory@0 {
- device_type = "memory";
- reg = <0 0 0 0x28000000>;
- };
-
- sd_io_1v8_reg: sd-io-1v8-reg {
- compatible = "regulator-gpio";
- regulator-name = "vdd-sd-io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-settling-time-us = <5000>;
- gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>;
- states = <1800000 1>,
- <3300000 0>;
- };
-
- sd_vcc_reg: sd-vcc-reg {
- compatible = "regulator-fixed";
- regulator-name = "vcc-sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- enable-active-high;
- gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
- };
-};
-
-/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
- * labeled "UART", i.e. the interface with the system console.
+/*
+ * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make
+ * the RP1 driver to load the RP1 dtb overlay at runtime, while
+ * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
+ * already contains RP1 node, so no overlay is loaded nor needed).
+ * This file is not intended to be modified, nodes should be added
+ * to the included bcm2712-rpi-5-b-ovl-rp1.dts.
*/
-&uart10 {
- status = "okay";
-};
-/* SDIO1 is used to drive the SD card */
-&sdio1 {
- vqmmc-supply = <&sd_io_1v8_reg>;
- vmmc-supply = <&sd_vcc_reg>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-ddr50;
- sd-uhs-sdr104;
-};
-
-&soc {
- firmware: firmware {
- compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
-
- mboxes = <&mailbox>;
- dma-ranges;
-
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
- #clock-cells = <1>;
- };
-
- reset: reset {
- compatible = "raspberrypi,firmware-reset";
- #reset-cells = <1>;
- };
- };
-
- power: power {
- compatible = "raspberrypi,bcm2835-power";
- firmware = <&firmware>;
- #power-domain-cells = <1>;
- };
-};
-
-&hvs {
- clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
- clock-names = "core", "disp";
-};
+/dts-v1/;
-&hdmi0 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
-};
+#include "bcm2712-rpi-5-b-ovl-rp1.dts"
-&hdmi1 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
+&pcie2 {
+ #include "rp1-nexus.dtsi"
};
&pcie1 {
};
};
+ /* PERF Peripherals */
bus@ff800000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x00 0x00 0xff800000 0x3000>;
+ ranges = <0x00 0x00 0xff800000 0x400000>;
twd: timer-mfd@400 {
compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
};
};
- gpio0: gpio-controller@500 {
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@500 {
compatible = "brcm,bcm6345-gpio";
+ reg = <0x500 0x04>, <0x528 0x04>;
reg-names = "dirout", "dat";
- reg = <0x500 0x28>, <0x528 0x28>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x504 0x04>, <0x52c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x508 0x04>, <0x530 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@50c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x50c 0x04>, <0x534 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
#gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x510 0x04>, <0x538 0x04>;
+ reg-names = "dirout", "dat";
gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 160 .. 191 */
+ gpio5: gpio@514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x514 0x04>, <0x53c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 192 .. 223 */
+ gpio6: gpio@518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x518 0x04>, <0x540 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 224 .. 255 */
+ gpio7: gpio@51c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x51c 0x04>, <0x544 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 256 .. 287 */
+ gpio8: gpio@520 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x520 0x04>, <0x548 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 288 .. 319 */
+ gpio9: gpio@524 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x524 0x04>, <0x54c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
};
pinctrl@560 {
#size-cells = <0>;
};
+ rng@b80 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
#reset-cells = <1>;
};
};
+
+ pl081_dma: dma-controller@59000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0x59000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
};
reboot {
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2022 Broadcom Ltd.
+ * This DTSI is for the B0 and later revision of the SoC
*/
#include <dt-bindings/interrupt-controller/irq.h>
#size-cells = <1>;
ranges = <0x0 0x0 0xff800000 0x800000>;
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x500 0x04>, <0x520 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x504 0x04>, <0x524 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x508 0x04>, <0x528 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@50c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x50c 0x04>, <0x52c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x510 0x04>, <0x530 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 160 .. 191 */
+ gpio5: gpio@514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x514 0x04>, <0x534 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 192 .. 223 */
+ gpio6: gpio@518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x518 0x04>, <0x538 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 224 .. 255 */
+ gpio7: gpio@51c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x51c 0x04>, <0x53c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+
+ leds: led-controller@800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x800 0xdc>;
+ status = "disabled";
+ };
+
+ rng@b80 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
};
};
+ /* B0 AHB Peripherals */
+ pl081_dma: dma-controller@11000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0x11000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
+
+ /* B0 ARM UART Peripheral block */
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ uart1: serial@13000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x13000 0x1000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: serial@14000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x14000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
};
};
};
};
+ /* PERF Peripherals */
bus@ff800000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
+ ranges = <0x0 0x0 0xff800000 0x400000>;
+
+ watchdog@480 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x480 0x10>;
+ };
+
+ watchdog@4c0 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x4c0 0x10>;
+ status = "disabled";
+ };
+
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x500 0x04>, <0x520 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x504 0x04>, <0x524 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x508 0x04>, <0x528 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@50c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x50c 0x04>, <0x52c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x510 0x04>, <0x530 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 160 .. 191 */
+ gpio5: gpio@514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x514 0x04>, <0x534 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 192 .. 223 */
+ gpio6: gpio@518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x518 0x04>, <0x538 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 224 .. 255 */
+ gpio7: gpio@51c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x51c 0x04>, <0x53c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
uart0: serial@640 {
compatible = "brcm,bcm6345-uart";
status = "disabled";
};
+ uart1: serial@660 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x660 0x18>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+
+ leds: led-controller@800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x800 0xdc>;
+ status = "disabled";
+ };
+
+ rng@b80 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
};
+
+ pl081_dma: dma-controller@59000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0x59000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
};
};
};
};
+ /* PERF Peripherals */
bus@ff800000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x62000>;
+ ranges = <0x0 0x0 0xff800000 0x400000>;
twd: timer-mfd@400 {
compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
};
};
+ /* GPIOs 0 .. 31 */
+ gpio0: gpio@500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x500 0x04>, <0x520 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 32 .. 63 */
+ gpio1: gpio@504 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x504 0x04>, <0x524 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 64 .. 95 */
+ gpio2: gpio@508 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x508 0x04>, <0x528 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 96 .. 127 */
+ gpio3: gpio@50c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x50c 0x04>, <0x52c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 128 .. 159 */
+ gpio4: gpio@510 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x510 0x04>, <0x530 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 160 .. 191 */
+ gpio5: gpio@514 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x514 0x04>, <0x534 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 192 .. 223 */
+ gpio6: gpio@518 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x518 0x04>, <0x538 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ /* GPIOs 224 .. 255 */
+ gpio7: gpio@51c {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x51c 0x04>, <0x53c 0x04>;
+ reg-names = "dirout", "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
uart0: serial@640 {
compatible = "brcm,bcm6345-uart";
reg = <0x640 0x18>;
status = "disabled";
};
+ uart1: serial@660 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x660 0x18>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+
+ leds: led-controller@800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-leds";
+ reg = <0x800 0xdc>;
+ status = "disabled";
+ };
+
+ rng@b80 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0xb80 0x28>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
hsspi: spi@1000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
};
+
+ pl081_dma: dma-controller@59000 {
+ compatible = "arm,pl081", "arm,primecell";
+ // The magic B105F00D info is missing
+ arm,primecell-periphid = <0x00041081>;
+ reg = <0x59000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ clocks = <&periph_clk>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ };
};
};
v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x00000 0x1000>;
arm,msi-base-spi = <72>;
v2m1: v2m@10000 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x10000 0x1000>;
arm,msi-base-spi = <88>;
v2m2: v2m@20000 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x20000 0x1000>;
arm,msi-base-spi = <104>;
v2m3: v2m@30000 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x30000 0x1000>;
arm,msi-base-spi = <120>;
v2m4: v2m@40000 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x40000 0x1000>;
arm,msi-base-spi = <136>;
v2m5: v2m@50000 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x50000 0x1000>;
arm,msi-base-spi = <152>;
v2m6: v2m@60000 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x60000 0x1000>;
arm,msi-base-spi = <168>;
v2m7: v2m@70000 {
compatible = "arm,gic-v2m-frame";
- interrupt-parent = <&gic>;
msi-controller;
reg = <0x70000 0x1000>;
arm,msi-base-spi = <184>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
+
+pci_ep_bus: pci-ep-bus@1 {
+ compatible = "simple-bus";
+ ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>;
+ dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rp1_clocks: clocks@40018000 {
+ compatible = "raspberrypi,rp1-clocks";
+ reg = <0x00 0x40018000 0x0 0x10038>;
+ #clock-cells = <1>;
+ clocks = <&clk_rp1_xosc>;
+ assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
+ <&rp1_clocks RP1_PLL_SYS>,
+ <&rp1_clocks RP1_PLL_SYS_SEC>,
+ <&rp1_clocks RP1_CLK_SYS>;
+ assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
+ <200000000>, // RP1_PLL_SYS
+ <125000000>, // RP1_PLL_SYS_SEC
+ <200000000>; // RP1_CLK_SYS
+ };
+
+ rp1_gpio: pinctrl@400d0000 {
+ compatible = "raspberrypi,rp1-gpio";
+ reg = <0x00 0x400d0000 0x0 0xc000>,
+ <0x00 0x400e0000 0x0 0xc000>,
+ <0x00 0x400f0000 0x0 0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+rp1_nexus {
+ compatible = "pci1de4,1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01 0x00 0x00000000
+ 0x02000000 0x00 0x00000000
+ 0x0 0x400000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #include "rp1-common.dtsi"
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+&pcie2 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ #include "rp1-nexus.dtsi"
+};
reg = <0x04 0x02020000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk125mhz>;
- clock-names = "apb_pclk";
+ clocks = <&clk125mhz>, <&clk125mhz>;
+ clock-names = "uartclk", "apb_pclk";
};
};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+/ {
+ model = "Radxa Orion O6";
+ compatible = "radxa,orion-o6", "cix,sky1";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x28000000>;
+ linux,cma-default;
+ };
+ };
+
+};
+
+&uart2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/cix,sky1.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x200>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a520";
+ enable-method = "psci";
+ reg = <0x0 0x300>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <403>;
+ };
+
+ cpu4: cpu@400 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x400>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu5: cpu@500 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x500>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu6: cpu@600 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x600>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu7: cpu@700 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x700>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu8: cpu@800 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x800>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu9: cpu@900 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0x900>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu10: cpu@a00 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0xa00>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu11: cpu@b00 {
+ compatible = "arm,cortex-a720";
+ enable-method = "psci";
+ reg = <0x0 0xb00>;
+ device_type = "cpu";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ core4 {
+ cpu = <&cpu4>;
+ };
+ core5 {
+ cpu = <&cpu5>;
+ };
+ core6 {
+ cpu = <&cpu6>;
+ };
+ core7 {
+ cpu = <&cpu7>;
+ };
+ core8 {
+ cpu = <&cpu8>;
+ };
+ core9 {
+ cpu = <&cpu9>;
+ };
+ core10 {
+ cpu = <&cpu10>;
+ };
+ core11 {
+ cpu = <&cpu11>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ ap_to_pm_scmi: scmi {
+ compatible = "arm,scmi";
+ mbox-names = "tx", "rx";
+ mboxes = <&mbox_ap2pm 8>, <&mbox_pm2ap 8>;
+ shmem = <&ap2pm_scmi_mem>, <&pm2ap_scmi_mem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ pmu-a520 {
+ compatible = "arm,cortex-a520-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+ };
+
+ pmu-a720 {
+ compatible = "arm,cortex-a720-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ ranges = <0 0 0 0 0x20 0>;
+ dma-ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ uart0: serial@40b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x040b0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&scmi_clk CLK_TREE_FCH_UART0_FUNC>, <&scmi_clk CLK_TREE_FCH_UART0_APB>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: serial@40c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x040c0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&scmi_clk CLK_TREE_FCH_UART1_FUNC>, <&scmi_clk CLK_TREE_FCH_UART1_APB>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: serial@40d0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x040d0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&scmi_clk CLK_TREE_FCH_UART2_FUNC>, <&scmi_clk CLK_TREE_FCH_UART2_APB>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: serial@40e0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x040e0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&scmi_clk CLK_TREE_FCH_UART3_FUNC>, <&scmi_clk CLK_TREE_FCH_UART3_APB>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ mbox_ap2se: mailbox@5060000 {
+ compatible = "cix,sky1-mbox";
+ reg = <0x0 0x05060000 0x0 0x10000>;
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <1>;
+ cix,mbox-dir = "tx";
+ };
+
+ mbox_se2ap: mailbox@5070000 {
+ compatible = "cix,sky1-mbox";
+ reg = <0x0 0x05070000 0x0 0x10000>;
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <1>;
+ cix,mbox-dir = "rx";
+ };
+
+ ap2pm_scmi_mem: shmem@6590000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x06590000 0x0 0x80>;
+ reg-io-width = <4>;
+ };
+
+ mbox_ap2pm: mailbox@6590080 {
+ compatible = "cix,sky1-mbox";
+ reg = <0x0 0x06590080 0x0 0xff80>;
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <1>;
+ cix,mbox-dir = "tx";
+ };
+
+ pm2ap_scmi_mem: shmem@65a0000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x065a0000 0x0 0x80>;
+ reg-io-width = <4>;
+ };
+
+ mbox_pm2ap: mailbox@65a0080 {
+ compatible = "cix,sky1-mbox";
+ reg = <0x0 0x065a0080 0x0 0xff80>;
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <1>;
+ cix,mbox-dir = "rx";
+ };
+
+ mbox_sfh2ap: mailbox@8090000 {
+ compatible = "cix,sky1-mbox";
+ reg = <0x0 0x08090000 0x0 0x10000>;
+ interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <1>;
+ cix,mbox-dir = "rx";
+ };
+
+ mbox_ap2sfh: mailbox@80a0000 {
+ compatible = "cix,sky1-mbox";
+ reg = <0x0 0x080a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+ #mbox-cells = <1>;
+ cix,mbox-dir = "tx";
+ };
+
+ gic: interrupt-controller@e010000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x0e010000 0 0x10000>, /* GICD */
+ <0x0 0x0e090000 0 0x300000>; /* GICR * 12 */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
+ #interrupt-cells = <4>;
+ interrupt-controller;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic_its: msi-controller@e050000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x0e050000 0x0 0x30000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ ppi-partitions {
+ ppi_partition0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+
+ ppi_partition1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6 &cpu7 &cpu8 &cpu9 &cpu10 &cpu11>;
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Galaxy S22+ (g0s/SM-S906B) device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos2200.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung Galaxy S22+ (SM-S906B)";
+ compatible = "samsung,g0s", "samsung,exynos2200";
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer {
+ compatible = "simple-framebuffer";
+ memory-region = <&cont_splash_mem>;
+ width = <1080>;
+ height = <2340>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ /*
+ * RTC clock (XrtcXTI); external, must be 32.768 kHz.
+ *
+ * TODO: Remove this once RTC clock is implemented properly as part of
+ * PMIC driver.
+ */
+ rtcclk: clock-rtcclk {
+ compatible = "fixed-clock";
+ clock-output-names = "rtcclk";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_volup>;
+ pinctrl-names = "default";
+
+ volup-key {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpa3 0 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>,
+ <0x8 0x80000000 0x1 0x7e000000>;
+ };
+
+ /* TODO: Remove this once PMIC is implemented */
+ reg_dummy: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "dummy_reg";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cont_splash_mem: framebuffer@f6200000 {
+ reg = <0x0 0xf6200000 0x0 (1080 * 2340 * 4)>;
+ no-map;
+ };
+
+ debug_kinfo_reserved: debug-kinfo-reserved@fcfff000 {
+ reg = <0x0 0xfcfff000 0x0 0x1000>;
+ no-map;
+ };
+
+ log_itmon: log-itmon@fffe0000 {
+ reg = <0x0 0xfffe0000 0x0 0x20000>;
+ no-map;
+ };
+ };
+};
+
+&cmu_hsi0 {
+ clocks = <&xtcxo>,
+ <&rtcclk>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_NOC>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_DPOSC>,
+ <&cmu_top CLK_DOUT_CMU_HSI0_USB32DRD>;
+ clock-names = "oscclk", "rtcclk", "noc", "dpgtc", "dposc", "usb";
+};
+
+/*
+ * cpu2 and cpu3 fail to come up consistently, which leads to a hang later
+ * in the boot process. Disable them until the issue is figured out.
+ */
+&cpu2 {
+ status = "fail";
+};
+
+&cpu3 {
+ status = "fail";
+};
+
+&ext_26m {
+ clock-frequency = <26000000>;
+};
+
+&ext_200m {
+ clock-frequency = <200000000>;
+};
+
+&mct_peris {
+ status = "okay";
+};
+
+&pinctrl_alive {
+ key_volup: key-volup-pins {
+ samsung,pins = "gpa3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+ };
+};
+
+&ppi_cluster0 {
+ affinity = <&cpu0 &cpu1>;
+};
+
+&usb {
+ /* TODO: Replace these once PMIC is implemented */
+ vdd10-supply = <®_dummy>;
+ vdd33-supply = <®_dummy>;
+ status = "okay";
+};
+
+&usb32drd {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+ role-switch-default-mode = "peripheral";
+ maximum-speed = "high-speed";
+};
+
+&usb_hsphy {
+ /* TODO: Replace these once PMIC is implemented */
+ vdda12-supply = <®_dummy>;
+ vdd-supply = <®_dummy>;
+ status = "okay";
+};
+
+&xtcxo {
+ clock-frequency = <76800000>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+ gpa0: gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa1: gpa1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa2: gpa2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa3: gpa3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpa4: gpa4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpq0: gpq0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpq1: gpq1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpq2: gpq2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ bt_hostwake: bt-hostwake-pins {
+ samsung,pins = "gpa0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ uart1_bus: uart1-bus-pins {
+ samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ };
+
+ wlan_host_wake: wlan-host-wake-pins {
+ samsung,pins = "gpa0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&pinctrl_cmgp {
+ gpm0: gpm0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm1: gpm1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm2: gpm2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm3: gpm3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm4: gpm4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm5: gpm5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm6: gpm6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm7: gpm7-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm8: gpm8-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm9: gpm9-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm10: gpm10-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm11: gpm11-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm12: gpm12-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm13: gpm13-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm14: gpm14-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm15: gpm15-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm16: gpm16-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm17: gpm17-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm20: gpm20-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm21: gpm21-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm22: gpm22-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm23: gpm23-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ gpm24: gpm24-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ hsi2c24_bus: hsi2c24-bus-pins {
+ samsung,pins = "gpm0-0", "gpm0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c25_bus: hsi2c25-bus-pins {
+ samsung,pins = "gpm1-0", "gpm1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c26_bus: hsi2c26-bus-pins {
+ samsung,pins = "gpm2-0", "gpm2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c27_bus: hsi2c27-bus-pins {
+ samsung,pins = "gpm3-0", "gpm3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c28_bus: hsi2c28-bus-pins {
+ samsung,pins = "gpm4-0", "gpm4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c29_bus: hsi2c29-bus-pins {
+ samsung,pins = "gpm5-0", "gpm5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c30_bus: hsi2c30-bus-pins {
+ samsung,pins = "gpm6-0", "gpm6-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c31_bus: hsi2c31-bus-pins {
+ samsung,pins = "gpm7-0", "gpm7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c32_bus: hsi2c32-bus-pins {
+ samsung,pins = "gpm8-0", "gpm8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c33_bus: hsi2c33-bus-pins {
+ samsung,pins = "gpm9-0", "gpm9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c34_bus: hsi2c34-bus-pins {
+ samsung,pins = "gpm10-0", "gpm10-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c35_bus: hsi2c35-bus-pins {
+ samsung,pins = "gpm11-0", "gpm11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c36_bus: hsi2c36-bus-pins {
+ samsung,pins = "gpm12-0", "gpm12-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c37_bus: hsi2c37-bus-pins {
+ samsung,pins = "gpm13-0", "gpm13-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c38_bus: hsi2c38-bus-pins {
+ samsung,pins = "gpm23-0", "gpm24-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi12_bus: spi12-bus-pins {
+ samsung,pins = "gpm0-0", "gpm0-1", "gpm1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi12_cs: spi12-cs-pins {
+ samsung,pins = "gpm1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi12_cs_func: spi12-cs-func-pins {
+ samsung,pins = "gpm1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi13_bus: spi13-bus-pins {
+ samsung,pins = "gpm2-0", "gpm2-1", "gpm3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi13_cs: spi13-cs-pins {
+ samsung,pins = "gpm3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi13_cs_func: spi13-cs-func-pins {
+ samsung,pins = "gpm3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi14_bus: spi14-bus-pins {
+ samsung,pins = "gpm4-0", "gpm4-1", "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi14_cs: spi14-cs-pins {
+ samsung,pins = "gpm5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi14_cs_func: spi14-cs-func-pins {
+ samsung,pins = "gpm5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi15_bus: spi15-bus-pins {
+ samsung,pins = "gpm6-0", "gpm6-1", "gpm7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi15_cs: spi15-cs-pins {
+ samsung,pins = "gpm7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi15_cs_func: spi15-cs-func-pins {
+ samsung,pins = "gpm7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi16_bus: spi16-bus-pins {
+ samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi16_cs: spi16-cs-pins {
+ samsung,pins = "gpm9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi16_cs_func: spi16-cs-func-pins {
+ samsung,pins = "gpm9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi17_bus: spi17-bus-pins {
+ samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi17_cs: spi17-cs-pins {
+ samsung,pins = "gpm11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi17_cs_func: spi17-cs-func-pins {
+ samsung,pins = "gpm11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi18_bus: spi18-bus-pins {
+ samsung,pins = "gpm12-0", "gpm12-1", "gpm13-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi18_cs: spi18-cs-pins {
+ samsung,pins = "gpm13-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi18_cs_func: spi18-cs-func-pins {
+ samsung,pins = "gpm13-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ uart14_bus_single: uart14-bus-single-pins {
+ samsung,pins = "gpm0-0", "gpm0-1", "gpm2-0", "gpm2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart14_bus_dual: uart14-bus-dual-pins {
+ samsung,pins = "gpm0-0", "gpm0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart15_bus_single: uart15-bus-single-pins {
+ samsung,pins = "gpm3-0", "gpm3-1", "gpm4-0", "gpm4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart15_bus_dual: uart15-bus-dual-pins {
+ samsung,pins = "gpm3-0", "gpm3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart16_bus_single: uart16-bus-single-pins {
+ samsung,pins = "gpm5-0", "gpm5-1", "gpm6-0", "gpm6-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart16_bus_dual: uart16-bus-dual-pins {
+ samsung,pins = "gpm5-0", "gpm5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart17_bus_single: uart17-bus-single-pins {
+ samsung,pins = "gpm7-0", "gpm7-1", "gpm8-0", "gpm8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart17_bus_dual: uart17-bus-dual-pins {
+ samsung,pins = "gpm7-0", "gpm7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart18_bus_single: uart18-bus-single-pins {
+ samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0", "gpm9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart18_bus_dual: uart18-bus-dual-pins {
+ samsung,pins = "gpm8-0", "gpm8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart19_bus_single: uart19-bus-single-pins {
+ samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0", "gpm11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart19_bus_dual: uart19-bus-dual-pins {
+ samsung,pins = "gpm12-0", "gpm12-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart20_bus_single: uart20-bus-single-pins {
+ samsung,pins = "gpm13-0", "gpm13-1", "gpm14-0", "gpm14-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart20_bus_dual: uart20-bus-dual-pins {
+ samsung,pins = "gpm13-0", "gpm13-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+};
+
+&pinctrl_hsi1 {
+ gpf0: gpf0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcie0_clkreq: pcie0-clkreq-pins {
+ samsung,pins = "gpf0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+ };
+
+ pcie0_perst: pcie0-perst-pins {
+ samsung,pins = "gpf0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ };
+
+ pcie1_clkreq: pcie1-clkreq-pins {
+ samsung,pins = "gpf0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+ };
+
+ pcie1_perst: pcie1-perst-pins {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ };
+};
+
+&pinctrl_hsi1ufs {
+ gpf2: gpf2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ufs_rst_n: ufs-rst-n-pins {
+ samsung,pins = "gpf2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ ufs_refclk_out: ufs-refclk-out-pins {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV3>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
+&pinctrl_peric0 {
+ gpb0: gpb0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb2: gpb2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb3: gpb3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp4: gpp4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ aud_i2s0_bus: aud-i2s0-bus-pins {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ aud_i2s1_bus: aud-i2s1-bus-pins {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ aud_i2s2_bus: aud-i2s2-bus-pins {
+ samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ aud_i2s3_bus: aud-i2s3-bus-pins {
+ samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ aud_i2s3_pci: aud-i2s3-pci-pins {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ aud_dsd_bus: aud-dsd-bus-pins {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ decon_0_te: decon-0-te-pins {
+ samsung,pins = "gpg2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ };
+
+ hsi2c8_bus: hsi2c8-bus-pins {
+ samsung,pins = "gpp4-0", "gpp4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c9_bus: hsi2c9-bus-pins {
+ samsung,pins = "gpp4-2", "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c0_bus: i3c0-bus-pins {
+ samsung,pins = "gpc0-0", "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c1_bus: i3c1-bus-pins {
+ samsung,pins = "gpc1-0", "gpc1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c2_bus: i3c2-bus-pins {
+ samsung,pins = "gpc2-0", "gpc2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ spi4_bus: spi4-bus-pins {
+ samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi4_cs: spi4-cs-pins {
+ samsung,pins = "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi4_cs_func: spi4-cs-func-pins {
+ samsung,pins = "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ uart6_bus_single: uart6-bus-single-pins {
+ samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart6_bus_dual: uart6-bus-dual-pins {
+ samsung,pins = "gpp4-0", "gpp4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
+&pinctrl_peric1 {
+ gpp7: gpp7-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp8: gpp8-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp9: gpp9-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp10: gpp10-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hsi2c14_bus: hsi2c14-bus-pins {
+ samsung,pins = "gpp7-0", "gpp7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c15_bus: hsi2c15-bus-pins {
+ samsung,pins = "gpp7-2", "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c16_bus: hsi2c16-bus-pins {
+ samsung,pins = "gpp8-0", "gpp8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c17_bus: hsi2c17-bus-pins {
+ samsung,pins = "gpp8-2", "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c18_bus: hsi2c18-bus-pins {
+ samsung,pins = "gpp9-0", "gpp9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c19_bus: hsi2c19-bus-pins {
+ samsung,pins = "gpp9-2", "gpp9-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c20_bus: hsi2c20-bus-pins {
+ samsung,pins = "gpp10-0", "gpp10-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c21_bus: hsi2c21-bus-pins {
+ samsung,pins = "gpp10-2", "gpp10-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi7_bus: spi7-bus-pins {
+ samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi7_cs: spi7-cs-pins {
+ samsung,pins = "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi7_cs_func: spi7-cs-func-pins {
+ samsung,pins = "gpp7-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi8_bus: spi8-bus-pins {
+ samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi8_cs: spi8-cs-pins {
+ samsung,pins = "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi8_cs_func: spi8-cs-func-pins {
+ samsung,pins = "gpp8-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi9_bus: spi9-bus-pins {
+ samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi9_cs: spi9-cs-pins {
+ samsung,pins = "gpp9-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi9_cs_func: spi9-cs-func-pins {
+ samsung,pins = "gpp9-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi10_bus: spi10-bus-pins {
+ samsung,pins = "gpp10-2", "gpp10-1", "gpp10-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi10_cs: spi10-cs-pins {
+ samsung,pins = "gpp10-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi10_cs_func: spi10-cs-func-pins {
+ samsung,pins = "gpp10-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ uart9_bus_single: uart9-bus-single-pins {
+ samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart9_bus_dual: uart9-bus-dual-pins {
+ samsung,pins = "gpp7-0", "gpp7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart10_bus_single: uart10-bus-single-pins {
+ samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart10_bus_dual: uart10-bus-dual-pins {
+ samsung,pins = "gpp8-0", "gpp8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart11_bus_single: uart11-bus-single-pins {
+ samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart11_bus_dual: uart11-bus-dual-pins {
+ samsung,pins = "gpp9-0", "gpp9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart12_bus_single: uart12-bus-single-pins {
+ samsung,pins = "gpp10-3", "gpp10-2", "gpp10-1", "gpp10-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart12_bus_dual: uart12-bus-dual-pins {
+ samsung,pins = "gpp10-0", "gpp10-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+};
+
+&pinctrl_peric2 {
+ gpc3: gpc3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc4: gpc4-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc5: gpc5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc6: gpc6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc7: gpc7-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc8: gpc8-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc9: gpc9-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp0: gpp0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp1: gpp1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp2: gpp2-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp3: gpp3-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp5: gpp5-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp6: gpp6-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp11: gpp11-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ hsi2c0_bus: hsi2c0-bus-pins {
+ samsung,pins = "gpp0-0", "gpp0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c1_bus: hsi2c1-bus-pins {
+ samsung,pins = "gpp0-2", "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c2_bus: hsi2c2-bus-pins {
+ samsung,pins = "gpp1-0", "gpp1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c3_bus: hsi2c3-bus-pins {
+ samsung,pins = "gpp1-2", "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c4_bus: hsi2c4-bus-pins {
+ samsung,pins = "gpp2-0", "gpp2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c5_bus: hsi2c5-bus-pins {
+ samsung,pins = "gpp2-2", "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c6_bus: hsi2c6-bus-pins {
+ samsung,pins = "gpp3-0", "gpp3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c7_bus: hsi2c7-bus-pins {
+ samsung,pins = "gpp3-2", "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c10_bus: hsi2c10-bus-pins {
+ samsung,pins = "gpp5-0", "gpp5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c11_bus: hsi2c11-bus-pins {
+ samsung,pins = "gpp5-2", "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c12_bus: hsi2c12-bus-pins {
+ samsung,pins = "gpp6-0", "gpp6-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c13_bus: hsi2c13-bus-pins {
+ samsung,pins = "gpp6-2", "gpp6-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi2c22_bus: hsi2c22-bus-pins {
+ samsung,pins = "gpp11-0", "gpp11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c3_bus: i3c3-bus-pins {
+ samsung,pins = "gpc3-0", "gpc3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c4_bus: i3c4-bus-pins {
+ samsung,pins = "gpc4-0", "gpc4-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c5_bus: i3c5-bus-pins {
+ samsung,pins = "gpc5-0", "gpc5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c6_bus: i3c6-bus-pins {
+ samsung,pins = "gpc6-0", "gpc6-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c7_bus: i3c7-bus-pins {
+ samsung,pins = "gpc7-0", "gpc7-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c8_bus: i3c8-bus-pins {
+ samsung,pins = "gpc8-0", "gpc8-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c9_bus: i3c9-bus-pins {
+ samsung,pins = "gpc9-0", "gpc9-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ i3c10_bus: i3c10-bus-pins {
+ samsung,pins = "gpp2-2", "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ i3c11_bus: i3c11-bus-pins {
+ samsung,pins = "gpp3-2", "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ hsi223_bus: hsi2c23-bus-pins {
+ samsung,pins = "gpp11-2", "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi0_bus: spi0-bus-pins {
+ samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi0_cs: spi0-cs-pins {
+ samsung,pins = "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi0_cs_func: spi0-cs-func-pins {
+ samsung,pins = "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi1_bus: spi1-bus-pins {
+ samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi1_cs: spi1-cs-pins {
+ samsung,pins = "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi1_cs_func: spi1-cs-func-pins {
+ samsung,pins = "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi2_bus: spi2-bus-pins {
+ samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi2_cs: spi2-cs-pins {
+ samsung,pins = "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi2_cs_func: spi2-cs-func-pins {
+ samsung,pins = "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi3_bus: spi3-bus-pins {
+ samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi3_cs: spi3-cs-pins {
+ samsung,pins = "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi3_cs_func: spi3-cs-func-pins {
+ samsung,pins = "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi5_bus: spi5-bus-pins {
+ samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi5_cs: spi5-cs-pins {
+ samsung,pins = "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi5_cs_func: spi5-cs-func-pins {
+ samsung,pins = "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi6_bus: spi6-bus-pins {
+ samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi6_cs: spi6-cs-pins {
+ samsung,pins = "gpp6-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi6_cs_func: spi6-cs-func-pins {
+ samsung,pins = "gpp6-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi11_bus: spi11-bus-pins {
+ samsung,pins = "gpp11-2", "gpp11-1", "gpp11-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi11_cs: spi11-cs-pins {
+ samsung,pins = "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ spi11_cs_func: spi11-cs-func-pins {
+ samsung,pins = "gpp11-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+ };
+
+ uart0_bus_single: uart0-bus-single-pins {
+ samsung,pins = "gpg0-2", "gpg0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ };
+
+ uart2_bus_single: uart2-bus-single-pins {
+ samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart2_bus_dual: uart2-bus-dual-pins {
+ samsung,pins = "gpp0-0", "gpp0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart3_bus_single: uart3-bus-single-pins {
+ samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart3_bus_dual: uart3-bus-dual-pins {
+ samsung,pins = "gpp1-0", "gpp1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart4_bus_single: uart4-bus-single-pins {
+ samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart4_bus_dual: uart4-bus-dual-pins {
+ samsung,pins = "gpp2-0", "gpp2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart5_bus_single: uart5-bus-single-pins {
+ samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart5_bus_dual: uart5-bus-dual-pins {
+ samsung,pins = "gpp3-0", "gpp3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart7_bus_single: uart7-bus-single-pins {
+ samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart7_bus_dual: uart7-bus-dual-pins {
+ samsung,pins = "gpp5-0", "gpp5-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart8_bus_single: uart8-bus-single-pins {
+ samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart8_bus_dual: uart8-bus-dual-pins {
+ samsung,pins = "gpp6-0", "gpp6-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart13_bus_single: uart13-bus-single-pins {
+ samsung,pins = "gpp11-3", "gpp11-2", "gpp11-1", "gpp11-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ uart13_bus_dual: uart13-bus-dual-pins {
+ samsung,pins = "gpp11-0", "gpp11-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
+&pinctrl_ufs {
+ gpf1: gpf1-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&pinctrl_vts {
+ gpv0: gpv0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ amic_pdm0_bus: amic-pdm0-bus-pins {
+ samsung,pins = "gpv0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ amic_pdm1_bus: amic-pdm1-bus-pins {
+ samsung,pins = "gpv0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ amic_pdm2_bus: amic-pdm2-bus-pins {
+ samsung,pins = "gpv0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ dmic_bus_clk0: dmic-bus-clk0-pins {
+ samsung,pins = "gpv0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ dmic_bus_clk1: dmic-bus-clk1-pins {
+ samsung,pins = "gpv0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ dmic_bus_clk2: dmic-bus-clk2-pins {
+ samsung,pins = "gpv0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ dmic_pdm0_bus: dmic-pdm0-bus-pins {
+ samsung,pins = "gpv0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ dmic_pdm1_bus: dmic-pdm1-bus-pins {
+ samsung,pins = "gpv0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+
+ dmic_pdm2_bus: dmic-pdm2-bus-pins {
+ samsung,pins = "gpv0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 2200 SoC device tree source
+ *
+ * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ */
+
+#include <dt-bindings/clock/samsung,exynos2200-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "samsung,exynos2200";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_cmgp;
+ pinctrl2 = &pinctrl_hsi1;
+ pinctrl3 = &pinctrl_ufs;
+ pinctrl4 = &pinctrl_hsi1ufs;
+ pinctrl5 = &pinctrl_peric0;
+ pinctrl6 = &pinctrl_peric1;
+ pinctrl7 = &pinctrl_peric2;
+ pinctrl8 = &pinctrl_vts;
+ };
+
+ xtcxo: clock-1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "oscclk";
+ };
+
+ ext_26m: clock-2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ext-26m";
+ };
+
+ ext_200m: clock-3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ext-200m";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+
+ core1 {
+ cpu = <&cpu5>;
+ };
+
+ core2 {
+ cpu = <&cpu6>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a510";
+ reg = <0>;
+ capacity-dmips-mhz = <260>;
+ dynamic-power-coefficient = <189>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a510";
+ reg = <0x100>;
+ capacity-dmips-mhz = <260>;
+ dynamic-power-coefficient = <189>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a510";
+ reg = <0x200>;
+ capacity-dmips-mhz = <260>;
+ dynamic-power-coefficient = <189>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a510";
+ reg = <0x300>;
+ capacity-dmips-mhz = <260>;
+ dynamic-power-coefficient = <189>;
+ enable-method = "psci";
+ cpu-idle-states = <&little_cpu_sleep>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a710";
+ reg = <0x400>;
+ capacity-dmips-mhz = <380>;
+ dynamic-power-coefficient = <560>;
+ enable-method = "psci";
+ cpu-idle-states = <&big_cpu_sleep>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a710";
+ reg = <0x500>;
+ capacity-dmips-mhz = <380>;
+ dynamic-power-coefficient = <560>;
+ enable-method = "psci";
+ cpu-idle-states = <&big_cpu_sleep>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a710";
+ reg = <0x600>;
+ capacity-dmips-mhz = <380>;
+ dynamic-power-coefficient = <560>;
+ enable-method = "psci";
+ cpu-idle-states = <&big_cpu_sleep>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-x2";
+ reg = <0x700>;
+ capacity-dmips-mhz = <488>;
+ dynamic-power-coefficient = <765>;
+ enable-method = "psci";
+ cpu-idle-states = <&prime_cpu_sleep>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ little_cpu_sleep: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "c2";
+ entry-latency-us = <70>;
+ exit-latency-us = <170>;
+ min-residency-us = <2000>;
+ arm,psci-suspend-param = <0x10000>;
+ };
+
+ big_cpu_sleep: cpu-sleep-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "c2";
+ entry-latency-us = <235>;
+ exit-latency-us = <220>;
+ min-residency-us = <3500>;
+ arm,psci-suspend-param = <0x10000>;
+ };
+
+ prime_cpu_sleep: cpu-sleep-2 {
+ compatible = "arm,idle-state";
+ idle-state-name = "c2";
+ entry-latency-us = <150>;
+ exit-latency-us = <190>;
+ min-residency-us = <2500>;
+ arm,psci-suspend-param = <0x10000>;
+ };
+ };
+ };
+
+ pmu-a510 {
+ compatible = "arm,cortex-a510-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-a710 {
+ compatible = "arm,cortex-a710-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ pmu-x2 {
+ compatible = "arm,cortex-x2-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chipid@10000000 {
+ compatible = "samsung,exynos2200-chipid",
+ "samsung,exynos850-chipid";
+ reg = <0x0 0x10000000 0x0 0x24>;
+ };
+
+ cmu_peris: clock-controller@10020000 {
+ compatible = "samsung,exynos2200-cmu-peris";
+ reg = <0x0 0x10020000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>,
+ <&cmu_top CLK_DOUT_CMU_PERIS_NOC>,
+ <&cmu_top CLK_DOUT_CMU_PERIS_GIC>;
+ clock-names = "tcxo_div3",
+ "noc",
+ "gic";
+ };
+
+ mct_peris: timer@10040000 {
+ compatible = "samsung,exynos2200-mct-peris",
+ "samsung,exynos4210-mct";
+ reg = <0x0 0x10040000 0x0 0x800>;
+ clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>;
+ clock-names = "fin_pll", "mct";
+ interrupts = <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 944 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 947 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 948 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 949 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@10200000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x10200000 0x0 0x10000>, /* GICD */
+ <0x0 0x10240000 0x0 0x200000>; /* GICR * 8 */
+
+ #interrupt-cells = <4>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6>;
+ };
+
+ ppi_cluster2: interrupt-partition-2 {
+ affinity = <&cpu7>;
+ };
+ };
+ };
+
+ cmu_peric0: clock-controller@10400000 {
+ compatible = "samsung,exynos2200-cmu-peric0";
+ reg = <0x0 0x10400000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top CLK_DOUT_CMU_PERIC0_NOC>,
+ <&cmu_top CLK_DOUT_CMU_PERIC0_IP0>,
+ <&cmu_top CLK_DOUT_CMU_PERIC0_IP1>;
+ clock-names = "oscclk", "noc", "ip0", "ip1";
+ };
+
+ syscon_peric0: syscon@10420000 {
+ compatible = "samsung,exynos2200-peric0-sysreg", "syscon";
+ reg = <0x0 0x10420000 0x0 0x2000>;
+ };
+
+ pinctrl_peric0: pinctrl@10430000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x10430000 0x0 0x1000>;
+ };
+
+ cmu_peric1: clock-controller@10700000 {
+ compatible = "samsung,exynos2200-cmu-peric1";
+ reg = <0x0 0x10700000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top CLK_DOUT_CMU_PERIC1_NOC>,
+ <&cmu_top CLK_DOUT_CMU_PERIC1_IP0>,
+ <&cmu_top CLK_DOUT_CMU_PERIC1_IP1>;
+ clock-names = "oscclk", "noc", "ip0", "ip1";
+ };
+
+ syscon_peric1: syscon@10720000 {
+ compatible = "samsung,exynos2200-peric1-sysreg", "syscon";
+ reg = <0x0 0x10720000 0x0 0x2000>;
+ };
+
+ pinctrl_peric1: pinctrl@10730000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x10730000 0x0 0x1000>;
+ };
+
+ cmu_hsi0: clock-controller@10a00000 {
+ compatible = "samsung,exynos2200-cmu-hsi0";
+ reg = <0x0 0x10a00000 0x0 0x8000>;
+ #clock-cells = <1>;
+ };
+
+ usb32drd: phy@10aa0000 {
+ compatible = "samsung,exynos2200-usb32drd-phy";
+ reg = <0x0 0x10aa0000 0x0 0x10000>;
+
+ clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+ clock-names = "phy";
+
+ #phy-cells = <1>;
+ phys = <&usb_hsphy>;
+ phy-names = "hs";
+
+ samsung,pmu-syscon = <&pmu_system_controller>;
+
+ status = "disabled";
+ };
+
+ usb_hsphy: phy@10ab0000 {
+ compatible = "samsung,exynos2200-eusb2-phy";
+ reg = <0x0 0x10ab0000 0x0 0x10000>;
+
+ clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>,
+ <&cmu_hsi0 CLK_MOUT_HSI0_NOC>,
+ <&cmu_hsi0 CLK_DOUT_DIV_CLK_HSI0_EUSB>;
+ clock-names = "ref", "bus", "ctrl";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb: usb@10b00000 {
+ compatible = "samsung,exynos2200-dwusb3";
+ ranges = <0x0 0x0 0x10b00000 0x10000>;
+
+ clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
+ clock-names = "link_aclk";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
+
+ usb_dwc3: usb@0 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x10000>;
+
+ clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>;
+ clock-names = "ref";
+
+ interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ phys = <&usb32drd 0>;
+ phy-names = "usb2-phy";
+
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,gfladj-refclk-lpm-sel-quirk;
+ snps,has-lpm-erratum;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,usb3_lpm_capable;
+ };
+ };
+
+ cmu_ufs: clock-controller@11000000 {
+ compatible = "samsung,exynos2200-cmu-ufs";
+ reg = <0x0 0x11000000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top CLK_DOUT_CMU_UFS_NOC>,
+ <&cmu_top CLK_MOUT_CMU_UFS_MMC_CARD>,
+ <&cmu_top CLK_DOUT_CMU_UFS_UFS_EMBD>;
+ clock-names = "oscclk", "noc", "mmc", "ufs";
+ };
+
+ syscon_ufs: syscon@11020000 {
+ compatible = "samsung,exynos2200-ufs-sysreg", "syscon";
+ reg = <0x0 0x11020000 0x0 0x2000>;
+ };
+
+ pinctrl_ufs: pinctrl@11040000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x11040000 0x0 0x1000>;
+ };
+
+ pinctrl_hsi1ufs: pinctrl@11060000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x11060000 0x0 0x1000>;
+ };
+
+ pinctrl_hsi1: pinctrl@11240000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x11240000 0x0 0x1000>;
+ };
+
+ cmu_peric2: clock-controller@11c00000 {
+ compatible = "samsung,exynos2200-cmu-peric2";
+ reg = <0x0 0x11c00000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top CLK_DOUT_CMU_PERIC2_NOC>,
+ <&cmu_top CLK_DOUT_CMU_PERIC2_IP0>,
+ <&cmu_top CLK_DOUT_CMU_PERIC2_IP1>;
+ clock-names = "oscclk", "noc", "ip0", "ip1";
+ };
+
+ syscon_peric2: syscon@11c20000 {
+ compatible = "samsung,exynos2200-peric2-sysreg", "syscon";
+ reg = <0x0 0x11c20000 0x0 0x4000>;
+ };
+
+ pinctrl_peric2: pinctrl@11c30000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x11c30000 0x0 0x1000>;
+ };
+
+ cmu_cmgp: clock-controller@14e00000 {
+ compatible = "samsung,exynos2200-cmu-cmgp";
+ reg = <0x0 0x14e00000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_alive CLK_DOUT_ALIVE_CMGP_NOC>,
+ <&cmu_alive CLK_DOUT_ALIVE_CMGP_PERI>;
+ clock-names = "oscclk", "noc", "peri";
+ };
+
+ syscon_cmgp: syscon@14e20000 {
+ compatible = "samsung,exynos2200-cmgp-sysreg", "syscon";
+ reg = <0x0 0x14e20000 0x0 0x2000>;
+ };
+
+ pinctrl_cmgp: pinctrl@14e30000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x14e30000 0x0 0x1000>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos2200-wakeup-eint",
+ "samsung,exynos850-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ cmu_vts: clock-controller@15300000 {
+ compatible = "samsung,exynos2200-cmu-vts";
+ reg = <0x0 0x15300000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top CLK_DOUT_CMU_VTS_DMIC>;
+ clock-names = "oscclk", "dmic";
+ };
+
+ pinctrl_vts: pinctrl@15320000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x15320000 0x0 0x1000>;
+ };
+
+ cmu_alive: clock-controller@15800000 {
+ compatible = "samsung,exynos2200-cmu-alive";
+ reg = <0x0 0x15800000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top CLK_DOUT_CMU_ALIVE_NOC>;
+ clock-names = "oscclk", "noc";
+ };
+
+ pinctrl_alive: pinctrl@15850000 {
+ compatible = "samsung,exynos2200-pinctrl";
+ reg = <0x0 0x15850000 0x0 0x1000>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos2200-wakeup-eint",
+ "samsung,exynos850-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ pmu_system_controller: system-controller@15860000 {
+ compatible = "samsung,exynos2200-pmu",
+ "samsung,exynos7-pmu", "syscon";
+ reg = <0x0 0x15860000 0x0 0x10000>;
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ offset = <0x3c00>; /* SYSTEM_CONFIGURATION */
+ mask = <0x2>; /* SWRESET_SYSTEM */
+ value = <0x2>; /* reset value */
+ };
+ };
+
+ cmu_top: clock-controller@1a320000 {
+ compatible = "samsung,exynos2200-cmu-top";
+ reg = <0x0 0x1a320000 0x0 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>;
+ clock-names = "oscclk";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+ /*
+ * Non-updatable, broken stock Samsung bootloader does not
+ * configure CNTFRQ_EL0
+ */
+ clock-frequency = <25600000>;
+ };
+};
+
+#include "exynos2200-pinctrl.dtsi"
};
};
- i2c_max98504: i2c-gpio-0 {
+ i2c_max98504: i2c-13 {
compatible = "i2c-gpio";
sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x3d800000>,
- <0x0 0x80000000 0x7d800000>;
+ <0x0 0x80000000 0x40000000>;
};
pwrseq_mmc1: pwrseq-mmc1 {
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x3e400000>,
- <0x0 0x80000000 0xbe400000>;
+ <0x0 0x80000000 0x80000000>;
};
pwrseq_mmc1: pwrseq-mmc1 {
phys = <&usbdrd_phy 0>;
usb-role-switch;
+ snps,usb2-gadget-lpm-disable;
};
};
samsung,uart-fifosize = <256>;
status = "disabled";
};
+
+ spi_0: spi@10880000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10880000 0x30>;
+ interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus &spi0_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 1>, <&pdma0 0>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <256>;
+ status = "disabled";
+ };
};
usi_1: usi@108a00c0 {
samsung,uart-fifosize = <256>;
status = "disabled";
};
+
+ spi_1: spi@108a0000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x108a0000 0x30>;
+ interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus &spi1_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 3>, <&pdma0 2>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <256>;
+ status = "disabled";
+ };
};
usi_2: usi@108c00c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_2: spi@108c0000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x108c0000 0x30>;
+ interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus &spi2_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 5>, <&pdma0 4>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_3: usi@108e00c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_3: spi@108e0000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x108e0000 0x30>;
+ interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_bus &spi3_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 7>, <&pdma0 6>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_4: usi@109000c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_4: spi@10900000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10900000 0x30>;
+ interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_bus &spi4_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_5: usi@109200c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_5: spi@10920000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10920000 0x30>;
+ interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_bus &spi5_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 11>, <&pdma0 10>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_6: usi@109400c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_6: spi@10940000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10940000 0x30>;
+ interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi6_bus &spi6_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 13>, <&pdma0 12>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_7: usi@109600c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_7: spi@10960000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10960000 0x30>;
+ interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi7_bus &spi7_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 15>, <&pdma0 14>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_8: usi@109800c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_8: spi@10980000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10980000 0x30>;
+ interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi8_bus &spi8_cs_func>;
+ clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+ <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma0 17>, <&pdma0 16>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
+
};
pwm: pwm@109b0000 {
samsung,uart-fifosize = <256>;
status = "disabled";
};
+
+ spi_9: spi@10c80000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10c80000 0x30>;
+ interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi9_bus &spi9_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 1>, <&pdma1 0>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <256>;
+ status = "disabled";
+ };
};
usi_10: usi@10ca00c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_10: spi@10ca0000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10ca0000 0x30>;
+ interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi10_bus &spi10_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 3>, <&pdma1 2>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_11: usi@10cc00c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_11: spi@10cc0000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10cc0000 0x30>;
+ interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi11_bus &spi11_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 5>, <&pdma1 4>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_12: usi@10ce00c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_12: spi@10ce0000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10ce0000 0x30>;
+ interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi12_bus &spi12_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 7>, <&pdma1 6>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_13: usi@10d000c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_13: spi@10d00000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10d00000 0x30>;
+ interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi13_bus &spi13_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 9>, <&pdma1 8>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_14: usi@10d200c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_14: spi@10d20000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10d20000 0x30>;
+ interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi14_bus &spi14_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 11>, <&pdma1 10>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_15: usi@10d400c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_15: spi@10d40000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10d40000 0x30>;
+ interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi15_bus &spi15_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 13>, <&pdma1 12>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_16: usi@10d600c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_16: spi@10d60000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10d60000 0x30>;
+ interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi16_bus &spi16_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 15>, <&pdma1 14>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
usi_17: usi@10d800c0 {
samsung,uart-fifosize = <64>;
status = "disabled";
};
+
+ spi_17: spi@10d80000 {
+ compatible = "samsung,exynosautov920-spi",
+ "samsung,exynos850-spi";
+ reg = <0x10d80000 0x30>;
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi17_bus &spi17_cs_func>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ dmas = <&pdma1 17>, <&pdma1 16>;
+ dma-names = "tx", "rx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <64>;
+ status = "disabled";
+ };
};
cmu_top: clock-controller@11000000 {
interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmu_hsi2: clock-controller@16b00000 {
+ compatible = "samsung,exynosautov920-cmu-hsi2";
+ reg = <0x16b00000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_HSI2_NOC>,
+ <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>,
+ <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>,
+ <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>;
+ clock-names = "oscclk",
+ "noc",
+ "ufs",
+ "embd",
+ "ethernet";
+ };
+
pinctrl_hsi2: pinctrl@16c10000 {
compatible = "samsung,exynosautov920-pinctrl";
reg = <0x16c10000 0x10000>;
};
};
+ reboot-mode {
+ compatible = "nvmem-reboot-mode";
+ nvmem-cells = <&nvmem_reboot_mode>;
+ nvmem-cell-names = "reboot-mode";
+ mode-bootloader = <0x800000fc>;
+ mode-charge = <0x8000000a>;
+ mode-dm-verity-device-corrupted = <0x80000050>;
+ mode-fastboot = <0x800000fa>;
+ mode-reboot-ab-update = <0x80000052>;
+ mode-recovery = <0x800000ff>;
+ mode-rescue = <0x800000f9>;
+ mode-shutdown-thermal = <0x80000051>;
+ mode-shutdown-thermal-battery = <0x80000051>;
+ };
+
/* TODO: Remove this once PMIC is implemented */
reg_placeholder: regulator-0 {
compatible = "regulator-fixed";
};
};
+&acpm_ipc {
+ pmic {
+ compatible = "samsung,s2mpg10-pmic";
+ interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ system-power-controller;
+ wakeup-source;
+
+ regulators {
+ };
+ };
+};
+
&ext_24_5m {
clock-frequency = <24576000>;
};
};
};
};
+
+ pmic@66 {
+ compatible = "maxim,max77759";
+ reg = <0x66>;
+
+ pinctrl-0 = <&if_pmic_int>;
+ pinctrl-names = "default";
+ interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio {
+ compatible = "maxim,max77759-gpio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * "Human-readable name [SIGNAL_LABEL]" where the
+ * latter comes from the schematic
+ */
+ gpio-line-names = "OTG boost [OTG_BOOST_EN]",
+ "max20339 IRQ [MW_OVP_INT_L]";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ nvmem-0 {
+ compatible = "maxim,max77759-nvmem";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nvmem_reboot_mode: reboot-mode@0 {
+ reg = <0x0 0x4>;
+ };
+
+ boot-reason@4 {
+ reg = <0x4 0x4>;
+ };
+
+ shutdown-user-flag@8 {
+ reg = <0x8 0x1>;
+ };
+
+ rsoc@a {
+ reg = <0xa 0x2>;
+ };
+ };
+ };
+ };
};
&pinctrl_far_alive {
samsung,pin-pud = <GS101_PIN_PULL_UP>;
samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
};
+
+ if_pmic_int: if-pmic-int-pins {
+ samsung,pins = "gpa8-3";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ samsung,pin-pud = <GS101_PIN_PULL_UP>;
+ samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+ };
};
&pinctrl_gpio_alive {
+ pmic_int: pmic-int-pins {
+ samsung,pins = "gpa0-6";
+ samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+ samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+ };
+
key_power: key-power-pins {
samsung,pins = "gpa10-1";
samsung,pin-function = <GS101_PIN_FUNC_EINT>;
idle-state-name = "c2";
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
entry-latency-us = <70>;
exit-latency-us = <160>;
min-residency-us = <2000>;
idle-state-name = "c2";
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
entry-latency-us = <150>;
exit-latency-us = <190>;
min-residency-us = <2500>;
idle-state-name = "c2";
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
entry-latency-us = <235>;
exit-latency-us = <220>;
min-residency-us = <3500>;
<&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
clock-names = "core_clk", "sclk_unipro_main", "fmp",
"aclk", "pclk", "sysreg";
+ dma-coherent;
freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
pinctrl-names = "default";
};
reboot: syscon-reboot {
- compatible = "syscon-reboot";
- offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
- mask = <0x2>; /* SWRESET_SYSTEM */
- value = <0x2>; /* reset value */
+ compatible = "google,gs101-reboot";
};
reboot-mode {
offset = <0x0810>; /* EXYNOS_PMU_SYSIP_DAT0 */
mode-bootloader = <0xfc>;
mode-charge = <0x0a>;
+ mode-dm-verity-device-corrupted = <0x50>;
mode-fastboot = <0xfa>;
mode-reboot-ab-update = <0x52>;
mode-recovery = <0xff>;
wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
};
+&sfp1 {
+ status = "okay";
+};
+
+&sfp1_i2c {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
#include "fsl-ls1043-post.dtsi"
#include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet6 {
+ status = "okay";
+};
qflash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
spi-max-frequency = <62500000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
+ vcc-supply = <®_vcc1v8>;
partitions {
compatible = "fixed-partitions";
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 36>,
+ <&edma0 1 37>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 34>,
+ <&edma0 1 35>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 40>,
+ <&edma0 1 41>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg";
+ dmas = <&edma0 1 32>,
+ <&edma0 1 33>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
+ dmas = <&edma0 1 30>,
+ <&edma0 1 31>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
+ dmas = <&edma0 1 28>,
+ <&edma0 1 29>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
+ dmas = <&edma0 1 26>,
+ <&edma0 1 27>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
+ dmas = <&edma0 1 24>,
+ <&edma0 1 25>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
+ dmas = <&edma0 1 22>,
+ <&edma0 1 23>;
+ dma-names = "rx", "tx";
status = "disabled";
};
wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
};
+&sfp1 {
+ status = "okay";
+};
+
+&sfp2 {
+ status = "okay";
+};
+
+&sfp1_i2c {
+ status = "okay";
+};
+
+&sfp2_i2c {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
#include "fsl-ls1046-post.dtsi"
#include "tqmls104xa-mbls10xxa-fman.dtsi"
+&enet6 {
+ status = "okay";
+};
+
&enet7 {
- status = "disabled";
+ status = "okay";
};
qflash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
spi-max-frequency = <62500000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
+ vcc-supply = <®_vcc1v8>;
partitions {
compatible = "fixed-partitions";
spi-max-frequency = <62500000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
+ vcc-supply = <®_vcc1v8>;
};
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 36>,
+ <&edma0 1 37>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 34>,
+ <&edma0 1 35>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ dmas = <&edma0 1 40>,
+ <&edma0 1 41>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
+ dmas = <&edma0 1 32>,
+ <&edma0 1 33>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 30>,
+ <&edma0 1 31>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 28>,
+ <&edma0 1 29>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 26>,
+ <&edma0 1 27>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 24>,
+ <&edma0 1 25>;
+ dma-names = "rx", "tx";
status = "disabled";
};
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
+ dmas = <&edma0 1 22>,
+ <&edma0 1 23>;
+ dma-names = "rx", "tx";
status = "disabled";
};
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
};
+&sfp1 {
+ status = "okay";
+};
+
+&sfp2 {
+ status = "okay";
+};
+
&sfp1_i2c {
status = "okay";
};
qflash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
spi-max-frequency = <62500000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
+ vcc-supply = <®_vcc1v8>;
partitions {
compatible = "fixed-partitions";
spi-max-frequency = <62500000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
+ vcc-supply = <®_vcc1v8>;
};
};
reg = <0x00>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <0x1>;
+ };
};
mdio@8 { /* On-board PHY #2 RGMI2*/
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <0x2>;
+ };
};
mdio@18 { /* Slot #1 */
status = "okay";
};
+&dpmac17 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii-id";
+};
+
&dspi0 {
status = "okay";
clock-output-names = "img_ipg_clk";
};
+img_pxl_clk: clock-img-pxl {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ clock-output-names = "img_pxl_clk";
+};
+
img_subsys: bus@58000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+ isi: isi@58100000 {
+ reg = <0x58100000 0x80000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>,
+ <&pdma6_lpcg IMX_LPCG_CLK_0>,
+ <&pdma7_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per1", "per2", "per3",
+ "per4", "per5", "per6", "per7";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>,
+ <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>,
+ <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>,
+ <&pd IMX_SC_R_ISI_CH5>,
+ <&pd IMX_SC_R_ISI_CH6>,
+ <&pd IMX_SC_R_ISI_CH7>;
+ status = "disabled";
+ };
+
+ irqsteer_csi0: irqsteer@58220000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58220000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_ipg_clk>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ gpio0_mipi_csi0: gpio@58222000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x58222000 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&irqsteer_csi0>;
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ };
+
+ csi0_core_lpcg: clock-controller@58223018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58223018 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi0_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ csi0_esc_lpcg: clock-controller@5822301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5822301c 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi0_lpcg_esc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c_mipi_csi0: i2c@58226000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58226000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_csi0>;
+ power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>;
+ status = "disabled";
+ };
+
+ mipi_csi_0: csi@58227000 {
+ compatible = "fsl,imx8qxp-mipi-csi2";
+ reg = <0x58227000 0x1000>,
+ <0x58221000 0x1000>;
+ clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_esc_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_pxl_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi0_esc_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <360000000>, <72000000>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ resets = <&scu_reset IMX_SC_R_CSI_0>;
+ status = "disabled";
+ };
+
+ irqsteer_csi1: irqsteer@58240000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58240000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&img_ipg_clk>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ gpio0_mipi_csi1: gpio@58242000 {
+ compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+ reg = <0x58242000 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&irqsteer_csi1>;
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ };
+
+ csi1_core_lpcg: clock-controller@58243018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58243018 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi1_lpcg_core_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ csi1_esc_lpcg: clock-controller@5824301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5824301c 0x4>;
+ clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "csi1_lpcg_esc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c_mipi_csi1: i2c@58246000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58246000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_csi1>;
+ power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>;
+ status = "disabled";
+ };
+
+ mipi_csi_1: csi@58247000 {
+ compatible = "fsl,imx8qxp-mipi-csi2";
+ reg = <0x58247000 0x1000>,
+ <0x58241000 0x1000>;
+ clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_esc_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_pxl_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "core", "esc", "ui";
+ assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>,
+ <&csi1_esc_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <360000000>, <72000000>;
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ resets = <&scu_reset IMX_SC_R_CSI_1>;
+ status = "disabled";
+ };
+
+ irqsteer_parallel: irqsteer@58260000 {
+ compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x58260000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_dummy>;
+ clock-names = "ipg";
+ interrupt-parent = <&gic>;
+ power-domains = <&pd IMX_SC_R_PI_0>;
+ fsl,channel = <0>;
+ fsl,num-irqs = <32>;
+ status = "disabled";
+ };
+
+ pi0_ipg_lpcg: clock-controller@58263004 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58263004 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_4>;
+ clock-output-names = "pi0_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pi0_pxl_lpcg: clock-controller@58263018 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58263018 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pi0_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pi0_misc_lpcg: clock-controller@5826301c {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x5826301c 0x4>;
+ clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pi0_lpcg_misc_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ i2c0_parallel: i2c@58266000 {
+ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x58266000 0x1000>;
+ interrupts = <8>;
+ clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>,
+ <&img_ipg_clk>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>;
+ assigned-clock-rates = <24000000>;
+ interrupt-parent = <&irqsteer_parallel>;
+ power-domains = <&pd IMX_SC_R_PI_0_I2C_0>;
+ status = "disabled";
+ };
+
jpegdec: jpegdec@58400000 {
reg = <0x58400000 0x00050000>;
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
<&pd IMX_SC_R_MJPEG_ENC_S0>;
};
+ pdma0_lpcg: clock-controller@58500000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58500000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma0_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>;
+ };
+
+ pdma1_lpcg: clock-controller@58510000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58510000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma1_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH1>;
+ };
+
+ pdma2_lpcg: clock-controller@58520000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58520000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma2_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH2>;
+ };
+
+ pdma3_lpcg: clock-controller@58530000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58530000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma3_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH3>;
+ };
+
+ pdma4_lpcg: clock-controller@58540000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58540000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma4_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH4>;
+ };
+
+ pdma5_lpcg: clock-controller@58550000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58550000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma5_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH5>;
+ };
+
+ pdma6_lpcg: clock-controller@58560000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58560000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma6_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH6>;
+ };
+
+ pdma7_lpcg: clock-controller@58570000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58570000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "pdma7_lpcg_clk";
+ power-domains = <&pd IMX_SC_R_ISI_CH7>;
+ };
+
+ csi0_pxl_lpcg: clock-controller@58580000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58580000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "csi0_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_CSI_0>;
+ };
+
+ csi1_pxl_lpcg: clock-controller@58590000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x58590000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "csi1_lpcg_pxl_clk";
+ power-domains = <&pd IMX_SC_R_CSI_1>;
+ };
+
+ hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x585a0000 0x10000>;
+ clocks = <&img_pxl_clk>;
+ #clock-cells = <1>;
+ clock-indices = <IMX_LPCG_CLK_0>;
+ clock-output-names = "hdmi_rx_lpcg_pxl_link_clk";
+ power-domains = <&pd IMX_SC_R_HDMI_RX>;
+ };
+
img_jpeg_dec_lpcg: clock-controller@585d0000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x585d0000 0x10000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+security_subsys: bus@31400000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x31400000 0x0 0x31400000 0x90000>;
+
+ crypto: crypto@31400000 {
+ compatible = "fsl,imx8qm-caam", "fsl,sec-v4.0";
+ reg = <0x31400000 0x90000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x31400000 0x90000>;
+ power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+ fsl,sec-era = <9>;
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_CAAM_JR2>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_CAAM_JR3>;
+ };
+ };
+};
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
<&clk IMX8MM_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
};
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
<&clk IMX8MN_AUDIO_PLL2_OUT>;
};
+&sound {
+ audio-asrc = <&easrc>;
+};
+
&tlv320aic3x04 {
clock-names = "mclk";
clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
cpu-supply = <&buck2_reg>;
};
+&easrc {
+ status = "okay";
+};
+
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi>;
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
<&clk IMX8MN_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
};
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <&ldo5>;
bus-width = <4>;
status = "okay";
};
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <&ldo5>;
bus-width = <4>;
status = "okay";
};
#sound-dai-cells = <1>;
};
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "wm8960-audio";
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&cpudai>;
- simple-audio-card,bitclock-master = <&cpudai>;
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Speaker", "External Speaker",
- "Microphone", "Mic Jack";
- simple-audio-card,routing =
- "Headphone Jack", "HP_L",
- "Headphone Jack", "HP_R",
- "External Speaker", "SPK_LP",
- "External Speaker", "SPK_LN",
- "External Speaker", "SPK_RP",
- "External Speaker", "SPK_RN",
- "LINPUT1", "Mic Jack",
- "LINPUT3", "Mic Jack",
- "Mic Jack", "MICB";
-
- cpudai: simple-audio-card,cpu {
- sound-dai = <&sai3>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&wm8960>;
- };
-
- };
-
sound-bt-sco {
compatible = "simple-audio-card";
simple-audio-card,name = "bt-sco-audio";
};
};
+ sound-wm8960 {
+ compatible = "fsl,imx-audio-wm8960";
+ audio-asrc = <&easrc>;
+ audio-codec = <&wm8960>;
+ audio-cpu = <&sai3>;
+ audio-routing = "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "LINPUT3", "Mic Jack",
+ "Mic Jack", "MICB";
+ hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ model = "wm8960-audio";
+ pinctrl-0 = <&pinctrl_hpdet>;
+ pinctrl-names = "default";
+ };
+
sound-xcvr {
compatible = "fsl,imx-audio-card";
model = "imx-audio-xcvr";
status = "okay";
};
+&easrc {
+ fsl,asrc-rate = <48000>;
+ status = "okay";
+};
+
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
>;
};
+ pinctrl_hpdet: hpdetgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0xd6
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
<1039500000>;
};
+&vpu_g1 {
+ assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+ assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+ assigned-clock-rates = <600000000>;
+};
+
+&vpu_g2 {
+ assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+ assigned-clock-rates = <500000000>;
+};
+
+&vpumix_blk_ctrl {
+ assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>;
+ assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>;
+ assigned-clock-rates = <600000000>, <600000000>;
+};
+
/delete-node/ &{noc_opp_table/opp-1000000000};
#ifndef __DTS_IMX8MP_PINFUNC_H
#define __DTS_IMX8MP_PINFUNC_H
+/* Drive Strength */
+#define MX8MP_DSE_X1 0x0
+#define MX8MP_DSE_X2 0x4
+#define MX8MP_DSE_X4 0x2
+#define MX8MP_DSE_X6 0x6
+
+/* Slew Rate */
+#define MX8MP_FSEL_FAST 0x10
+#define MX8MP_FSEL_SLOW 0x0
+
+/* Open Drain */
+#define MX8MP_ODE_ENABLE 0x20
+#define MX8MP_ODE_DISABLE 0x0
+
+#define MX8MP_PULL_DOWN 0x0
+#define MX8MP_PULL_UP 0x40
+
+/* Hysteresis */
+#define MX8MP_HYS_CMOS 0x0
+#define MX8MP_HYS_SCHMITT 0x80
+
+#define MX8MP_PULL_ENABLE 0x100
+#define MX8MP_PULL_DISABLE 0x0
+
+/* SION force input mode */
+#define MX8MP_SION 0x40000000
+
+/* long defaults */
+#define MX8MP_USDHC_DATA_DEFAULT (MX8MP_FSEL_FAST | MX8MP_PULL_UP | \
+ MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+#define MX8MP_I2C_DEFAULT (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | \
+ MX8MP_PULL_ENABLE | MX8MP_SION)
+
/*
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
<&pinctrl_gpio13>;
};
-&gpio3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lvds_dsi_sel>;
-};
-
&gpio4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_gpio6>;
#pwm-cells = <2>;
fan {
+ cooling-levels = <255>;
pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>;
};
};
};
&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_dsi_sel>;
gpio-line-names = "ETH_0_INT#", /* 0 */
"SLEEP#",
"",
"",
"",
"SMARC_I2C_PM_CK";
-
- lvds_dsi_mux_hog: lvds-dsi-mux-hog {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_HIGH>;
- line-name = "LVDS_DSI_SEL";
- /* LVDS_DSI_SEL as DSI */
- output-low;
- };
};
&gpio4 {
status = "okay";
};
+®_usdhc2_vqmmc {
+ status = "okay";
+};
+
&sai5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai5>;
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>,
- <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>,
- <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
- <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
- <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
- <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
- <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>;
};
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
model = "tqm-tlv320aic32";
+ audio-asrc = <&easrc>;
audio-cpu = <&sai3>;
audio-codec = <&tlv320aic3x04>;
};
status = "okay";
};
+®_usdhc2_vqmmc {
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>,
- <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>,
- <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
- <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
- <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
- <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
- <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>;
};
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
reg = <0x0 0x40000000 0 0x80000000>;
};
- /* identical to buck4_reg, but should never change */
- reg_vcc3v3: regulator-vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC3V3";
- regulator-min-microvolt = <3300000>;
+ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
+ regulator-name = "V_SD2";
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
+ vin-supply = <&ldo5_reg>;
+ status = "disabled";
};
};
cpu-supply = <&buck2_reg>;
};
+&easrc {
+ status = "okay";
+};
+
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi0>;
read-only;
reg = <0x53>;
pagesize = <16>;
- vcc-supply = <®_vcc3v3>;
+ vcc-supply = <&buck4_reg>;
};
m24c64: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
- vcc-supply = <®_vcc3v3>;
+ vcc-supply = <&buck4_reg>;
};
};
+&usdhc2 {
+ vqmmc-supply = <®_usdhc2_vqmmc>;
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
non-removable;
no-sd;
no-sdio;
- vmmc-supply = <®_vcc3v3>;
+ vmmc-supply = <&buck4_reg>;
vqmmc-supply = <&buck5_reg>;
status = "okay";
};
fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x10>;
};
+ pinctrl_reg_usdhc2_vqmmc: regusdhc2vqmmcgrp {
+ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0xc0>;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ model = "GOcontroll Moduline Display with BOE av101hdt-a10 display";
+
+ panel {
+ compatible = "boe,av101hdt-a10";
+ enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pinctrl_panel>;
+ pinctrl-names = "default";
+ power-supply = <®_3v3_per>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_lvds_in: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+ };
+
+ reg_vbus: regulator-vbus {
+ compatible = "regulator-fixed";
+ power-supply = <®_6v4>;
+ regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb-c-vbus";
+ };
+};
+
+&iomuxc {
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+ MX8MP_DSE_X1
+ >;
+ };
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&lvds_bridge {
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>;
+ /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
+ assigned-clock-rates = <0>, <1054620000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ ldb_lvds_ch0: endpoint {
+ remote-endpoint = <&panel_lvds_in>;
+ };
+ };
+ };
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "host";
+ pd-disable;
+ vbus-supply = <®_vbus>;
+
+ port {
+ high_speed_ep: endpoint {
+ remote-endpoint = <&usb1_hs_ep>;
+ };
+ };
+ };
+
+ port {
+ usb1_hs_ep: endpoint {
+ remote-endpoint = <&high_speed_ep>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ model = "GOcontroll Moduline Display with BOE av123z7m-n17 display";
+
+ panel {
+ compatible = "boe,av123z7m-n17";
+ enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pinctrl_panel>;
+ pinctrl-names = "default";
+ power-supply = <®_3v3_per>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+
+ panel_in0: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+
+ panel_in1: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+ };
+};
+
+&i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* sn65dsi85 */
+ bridge@2d {
+ compatible = "ti,sn65dsi84";
+ reg = <0x2d>;
+ enable-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pinctrl_lvds_bridge>;
+ pinctrl-names = "default";
+ vcc-supply = <®_1v8_per>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsi_lvds_bridge_in: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in0>;
+ };
+ };
+ };
+ };
+
+ /* max25014 @ 0x6f */
+};
+
+&iomuxc {
+ pinctrl_lvds_bridge: lvdsbridgegrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09
+ MX8MP_DSE_X1
+ >;
+ };
+};
+
+&lcdif1 {
+ status = "okay";
+};
+
+&mipi_dsi {
+ /*
+ * burst has to be at least 2x dsi clock that the sn65dsi85 expects
+ * display pixelclock * bpp / lanes / 2 = dsi clock
+ * 88.000.000 * 24 / 4 / 2 = 264.000.000
+ * range gets rounded up to 265.000.000 - 270.000.000
+ * 267.500.000 * 2 = 535.000.000
+ */
+ samsung,burst-clock-frequency = <535000000>;
+ samsung,esc-clock-frequency = <12000000>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ mipi_dsi_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = < &dsi_lvds_bridge_in>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-tx8p-ml81.dtsi"
+
+/ {
+ compatible = "gocontroll,moduline-display", "fsl,imx8mp";
+ chassis-type = "embedded";
+ hardware = "Moduline Display V1.06";
+ model = "GOcontroll Moduline Display baseboard";
+
+ aliases {
+ can0 = &flexcan1;
+ can1 = &flexcan2;
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ rtc0 = &rtc_pcf; /* i2c rtc is the main rtc */
+ rtc1 = &snvs_rtc;
+ spi0 = &ecspi2; /* spidev number compatibility */
+ spi1 = &ecspi1; /* spidev number compatibility */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ external-sensor-supply {
+ compatible = "regulator-output";
+ vout-supply = <®_5v0_sensor>;
+ };
+
+ reg_1v8_per: regulator-1v8-per {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&pinctrl_reg_1v8>;
+ pinctrl-names = "default";
+ power-supply = <®_3v3_per>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "1v8-per";
+ gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_3v3_per: regulator-3v3-per {
+ compatible = "regulator-fixed";
+ power-supply = <®_6v4>;
+ regulator-always-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3v3-per";
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ power-supply = <®_6v4>;
+ regulator-always-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "5v0";
+ };
+
+ reg_5v0_sensor: regulator-5v0-sensor {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&pinctrl_reg_5v0_sensor>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "5v0-supply-external-sensor";
+ gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_6v4: regulator-6v4 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-max-microvolt = <6400000>;
+ regulator-min-microvolt = <6400000>;
+ regulator-name = "6v4";
+ };
+
+ reg_can1_stby: regulator-can1-stby {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&pinctrl_flexcan1_reg>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "can1-stby";
+ gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&pinctrl_flexcan2_reg>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "can2-stby";
+ gpio = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,name = "tas2505-audio";
+ simple-audio-card,routing = "Speaker", "DAC";
+ simple-audio-card,widgets = "Speaker", "Speaker External";
+
+ simple-audio-card,codec {
+ sound-dai = <&tas2505>;
+ };
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai6>;
+ };
+ };
+
+ wifi_powerseq: wifi-powerseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-0 = <&pinctrl_wl_reg>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <500000>;
+ reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>,
+ <&gpio1 11 GPIO_ACTIVE_LOW>,
+ <&gpio1 10 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ connector@0 {
+ compatible = "gocontroll,moduline-module-slot";
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ i2c-bus = <&i2c2>;
+ reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+ slot-number = <1>;
+ spi-max-frequency = <54000000>;
+ sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ vddhpp-supply = <®_6v4>;
+ vddp-supply = <®_5v0>;
+ vdd-supply = <®_3v3_per>;
+ };
+
+ connector@1 {
+ compatible = "gocontroll,moduline-module-slot";
+ reg = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ i2c-bus = <&i2c2>;
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ slot-number = <2>;
+ spi-max-frequency = <54000000>;
+ sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ vddhpp-supply = <®_6v4>;
+ vddp-supply = <®_5v0>;
+ vdd-supply = <®_3v3_per>;
+ };
+
+ adc@2 {
+ compatible = "microchip,mcp3004";
+ reg = <2>;
+ spi-max-frequency = <2300000>;
+ vref-supply = <®_vdd_3v3>;
+ };
+};
+
+&flexcan1 {
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ pinctrl-names = "default";
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-names = "default";
+ xceiver-supply = <®_can2_stby>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ pinctrl-names = "default", "gpio";
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ pinctrl-names = "default", "gpio";
+ scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ tas2505: audio-codec@18 {
+ compatible = "ti,tas2505";
+ reg = <0x18>;
+ clocks = <&clk IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ aic32x4-gpio-func = <0xff 0xff 0xff 0xff 0xff>;
+ av-supply = <®_1v8_per>;
+ dv-supply = <®_1v8_per>;
+ iov-supply = <®_vdd_3v3>;
+ pinctrl-0 = <&pinctrl_tas_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ };
+
+ rtc_pcf: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ quartz-load-femtofarads = <7000>;
+
+ clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_bt: btgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI
+ MX8MP_DSE_X4
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO
+ (MX8MP_DSE_X4 | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK
+ MX8MP_DSE_X4
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__CAN1_RX
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_flexcan1_reg: flexcan1reggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_TXD__CAN2_RX
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_UART3_RXD__CAN2_TX
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_flexcan2_reg: flexcan2reggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL
+ MX8MP_I2C_DEFAULT
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA
+ MX8MP_I2C_DEFAULT
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16
+ MX8MP_I2C_DEFAULT
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17
+ MX8MP_I2C_DEFAULT
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL
+ MX8MP_I2C_DEFAULT
+ MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA
+ MX8MP_I2C_DEFAULT
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12
+ MX8MP_I2C_DEFAULT
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13
+ MX8MP_I2C_DEFAULT
+ >;
+ };
+
+ pinctrl_usdhc2: pinctrlusdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ >;
+ };
+
+ pinctrl_reg_1v8: reg-1v8-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_reg_5v0_sensor: reg-5v0-sensorgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_sai6: sai6grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+ >;
+ };
+
+ pinctrl_tas_reset: tasresetgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B
+ (MX8MP_DSE_X6 | MX8MP_HYS_SCHMITT)
+ >;
+ };
+
+ pinctrl_wl_int: wlintgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13
+ (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_wl_reg: wlreggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19
+ MX8MP_DSE_X1
+ >;
+ };
+};
+
+&sai6 {
+ assigned-clocks = <&clk IMX8MP_CLK_SAI6>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+ pinctrl-0 = <&pinctrl_sai6>;
+ pinctrl-names = "default";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&pinctrl_uart2>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wakeup";
+ device-wakeup-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ max-speed = <921600>;
+ pinctrl-0 = <&pinctrl_bt>;
+ pinctrl-names = "default";
+ shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <®_3v3_per>;
+ vddio-supply = <®_3v3_per>;
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "peripheral";
+};
+
+&usdhc2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <50000000>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ mmc-pwrseq = <&wifi_powerseq>;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-names = "default";
+ sd-uhs-sdr25;
+ vmmc-supply = <®_3v3_per>;
+ status = "okay";
+
+ wifi@1 {
+ compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ pinctrl-0 = <&pinctrl_wl_int>;
+ pinctrl-names = "default";
+ brcm,board-type = "GOcontroll,moduline";
+ };
+};
+
+&wdog1 {
+ pinctrl-0 = <&pinctrl_wdog>;
+ pinctrl-names = "default";
+ fsl,ext-reset-output;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 Lothar Waßmann <LW@KARO-electronics.de>
+ * 2025 Maud Spierings <maudspierings@gocontroll.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+ /* PHY regulator */
+ regulator-3v3-etn {
+ compatible = "regulator-fixed";
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-0 = <&pinctrl_reg_3v3_etn>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3v3-etn";
+ vin-supply = <®_vdd_3v3>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&eqos {
+ assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+ <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+ <&clk IMX8MP_CLK_ENET_QOS>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+ <&clk IMX8MP_SYS_PLL2_100M>,
+ <&clk IMX8MP_SYS_PLL2_50M>;
+ assigned-clock-rates = <266000000>, <100000000>, <50000000>;
+ phy-handle = <ðphy0>;
+ phy-mode = "rmii";
+ pinctrl-0 = <&pinctrl_eqos>;
+ pinctrl-1 = <&pinctrl_eqos_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pinctrl_ethphy_rst_b>;
+ pinctrl-names = "default";
+ reset-delay-us = <25000>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clk IMX8MP_CLK_ENET_QOS>;
+ pinctrl-0 = <&pinctrl_ethphy_int_b>;
+ pinctrl-names = "default";
+ smsc,disable-energy-detect;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "SODIMM_152",
+ "SODIMM_42",
+ "PMIC_WDOG_B SODIMM_153",
+ "PMIC_IRQ_B",
+ "SODIMM_154",
+ "SODIMM_155",
+ "SODIMM_156",
+ "SODIMM_157",
+ "SODIMM_158",
+ "SODIMM_159",
+ "SODIMM_161",
+ "SODIMM_162",
+ "SODIMM_34",
+ "SODIMM_36",
+ "SODIMM_27",
+ "SODIMM_28",
+ "ENET_MDC",
+ "ENET_MDIO",
+ "",
+ "ENET_XTAL1/CLKIN",
+ "ENET_TXD1",
+ "ENET_TXD0",
+ "ENET_TXEN",
+ "ENET_POWER",
+ "ENET_COL/CRS_DV",
+ "ENET_RXER",
+ "ENET_RXD0",
+ "ENET_RXD1",
+ "",
+ "",
+ "",
+ "";
+};
+
+&gpio2 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_51",
+ "SODIMM_57",
+ "SODIMM_56",
+ "SODIMM_52",
+ "SODIMM_53",
+ "SODIMM_54",
+ "SODIMM_55",
+ "SODIMM_15",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&gpio3 {
+ gpio-line-names = "",
+ "",
+ "EMMC_DS",
+ "EMMC_DAT5",
+ "EMMC_DAT6",
+ "EMMC_DAT7",
+ "",
+ "",
+ "",
+ "",
+ "EMMC_DAT0",
+ "EMMC_DAT1",
+ "EMMC_DAT2",
+ "EMMC_DAT3",
+ "",
+ "EMMC_DAT4",
+ "",
+ "EMMC_CLK",
+ "EMMC_CMD",
+ "SODIMM_75",
+ "SODIMM_145",
+ "SODIMM_163",
+ "SODIMM_164",
+ "SODIMM_165",
+ "SODIMM_143",
+ "SODIMM_144",
+ "SODIMM_72",
+ "SODIMM_73",
+ "SODIMM_74",
+ "SODIMM_93",
+ "",
+ "";
+};
+
+&gpio4 {
+ gpio-line-names = "SODIMM_98",
+ "SODIMM_99",
+ "SODIMM_100",
+ "SODIMM_101",
+ "SODIMM_45",
+ "SODIMM_43",
+ "SODIMM_105",
+ "SODIMM_106",
+ "SODIMM_107",
+ "SODIMM_108",
+ "SODIMM_104",
+ "SODIMM_103",
+ "SODIMM_115",
+ "SODIMM_114",
+ "SODIMM_113",
+ "SODIMM_112",
+ "SODIMM_109",
+ "SODIMM_110",
+ "SODIMM_95",
+ "SODIMM_96",
+ "SODIMM_97",
+ "ENET_nINT",
+ "ENET_nRST",
+ "SODIMM_84",
+ "SODIMM_87",
+ "SODIMM_86",
+ "SODIMM_85",
+ "SODIMM_83",
+ "",
+ "SODIMM_66",
+ "SODIMM_65",
+ "";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "SODIMM_76",
+ "SODIMM_81",
+ "SODIMM_146",
+ "SODIMM_48",
+ "SODIMM_46",
+ "SODIMM_47",
+ "SODIMM_44",
+ "SODIMM_49",
+ "",
+ "SODIMM_70",
+ "SODIMM_69",
+ "PMIC_SCL",
+ "PMIC_SDA",
+ "SODIMM_41",
+ "SODIMM_40",
+ "SODIMM_148",
+ "SODIMM_149",
+ "SODIMM_150",
+ "SODIMM_151",
+ "SODIMM_60",
+ "SODIMM_59",
+ "SODIMM_64",
+ "SODIMM_63",
+ "SODIMM_62",
+ "SODIMM_61",
+ "SODIMM_68",
+ "SODIMM_67",
+ "",
+ "";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ pinctrl-names = "default", "gpio";
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ pinctrl-names = "default";
+
+ regulators {
+ reg_vdd_soc: BUCK1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microvolt = <805000>;
+ regulator-name = "vdd-soc";
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_vdd_arm: BUCK2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <950000>;
+ regulator-min-microvolt = <805000>;
+ regulator-name = "vdd-core";
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ reg_vdd_3v3: BUCK4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "3v3";
+ };
+
+ reg_nvcc_nand: BUCK5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "nvcc-nand";
+ };
+
+ reg_nvcc_dram: BUCK6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1100000>;
+ regulator-name = "nvcc-dram";
+ };
+
+ reg_snvs_1v8: LDO1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "snvs-1v8";
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-always-on;
+ regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <800000>;
+ regulator-name = "LDO2";
+ };
+
+ reg_vdda_1v8: LDO3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "vdda-1v8";
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <800000>;
+ regulator-name = "LDO4";
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "LDO5";
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK
+ (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_SION)
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC
+ (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO
+ (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0
+ (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1
+ (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER
+ (MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST)
+ >;
+ };
+
+ pinctrl_eqos_sleep: eqos-sleep-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22
+ (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_ethphy_int_b: ethphy-int-bgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21
+ (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT)
+ >;
+ };
+
+ pinctrl_ethphy_rst_b: ethphy-rst-bgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL
+ MX8MP_I2C_DEFAULT
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA
+ MX8MP_I2C_DEFAULT
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14
+ MX8MP_I2C_DEFAULT
+ MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15
+ MX8MP_I2C_DEFAULT
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03
+ (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_reg_3v3_etn: reg-3v3-etngrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+ (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+ MX8MP_USDHC_DATA_DEFAULT
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+ (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+ (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7
+ (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT)
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ >;
+ };
+};
+
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <200000000>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ vmmc-supply = <®_vdd_3v3>;
+ voltage-ranges = <3300 3300>;
+ vqmmc-supply = <®_nvcc_nand>;
+ status = "okay";
+};
states = <3300000 0x0 1800000 0x1>;
vin-supply = <&ldo5>;
};
+
+ reg_phy_supply: regulator-phy-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "phy-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <20000>;
+ gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_phy_vddio: regulator-phy-vddio {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
&A53_0 {
cpu-supply = <&buck2>;
};
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+ vddio-supply = <®_phy_vddio>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+ };
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
+ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x10
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x150
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x400001c2
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
&gpio3 {
gpio-line-names =
"", "", "", "", "", "", "m2_rst", "",
- "", "", "", "", "", "", "m2_gpio10", "",
+ "", "", "", "", "", "", "m2_wdis2#", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
gpio-line-names =
"", "", "m2_off#", "", "", "", "", "",
"", "", "", "", "", "", "", "",
- "", "", "m2_wdis#", "", "", "", "", "",
+ "", "", "m2_wdis1#", "", "", "", "", "",
"", "", "", "", "", "", "", "rs485_en";
};
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40000040 /* M2SKT_OFF# */
- MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS1# */
MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40000040 /* M2SKT_PIN20 */
MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000040 /* M2SKT_PIN22 */
MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x40000150 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
- MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_GPIO10 */
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000150 /* M2KST_WDIS2# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
- thermal-sensors = <&tmu 0>;
+ thermal-sensors = <&tmu 1>;
trips {
cpu_alert0: trip0 {
temperature = <85000>;
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
soc-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
- thermal-sensors = <&tmu 1>;
+ thermal-sensors = <&tmu 0>;
trips {
soc_alert0: trip0 {
temperature = <85000>;
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
pgc_vpu_g1: power-domain@11 {
#power-domain-cells = <0>;
- power-domains = <&pgc_vpumix>;
reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
- clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
};
pgc_vpu_g2: power-domain@12 {
#power-domain-cells = <0>;
- power-domains = <&pgc_vpumix>;
reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
- clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
-
};
pgc_vpu_vc8000e: power-domain@13 {
#power-domain-cells = <0>;
- power-domains = <&pgc_vpumix>;
reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
- clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
};
pgc_hdmimix: power-domain@14 {
<&clk IMX8MP_CLK_GPU_ROOT>,
<&clk IMX8MP_CLK_GPU_AHB>;
clock-names = "core", "shader", "bus", "reg";
+ #cooling-cells = <2>;
assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
<&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
<&clk IMX8MP_CLK_GPU_ROOT>,
<&clk IMX8MP_CLK_GPU_AHB>;
clock-names = "core", "bus", "reg";
+ #cooling-cells = <2>;
assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
assigned-clock-rates = <1000000000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
- assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
- assigned-clock-rates = <600000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>;
power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
};
reg = <0x38310000 0x10000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
- assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
- assigned-clock-rates = <500000000>;
+ assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>, <&clk IMX8MP_VPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+ assigned-clock-rates = <700000000>, <700000000>;
power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
};
<&clk IMX8MP_CLK_VPU_G2_ROOT>,
<&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
clock-names = "g1", "g2", "vc8000e";
- assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
- assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
- assigned-clock-rates = <600000000>, <600000000>;
+ assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>;
interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
<&clk IMX8MP_CLK_ML_AXI>,
<&clk IMX8MP_CLK_ML_AHB>;
clock-names = "core", "shader", "bus", "reg";
+ #cooling-cells = <2>;
power-domains = <&pgc_mlmix>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov5640_mipi_0: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&xtal24m>;
+ clock-names = "xclk";
+ pinctrl-0 = <&pinctrl_mipi_csi0>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <®_2v8>;
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
+
+ port {
+ ov5640_mipi_0_ep: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi0_in>;
+ };
+ };
+ };
+};
+
+&irqsteer_csi0 {
+ status = "okay";
+};
+
+&isi {
+ status = "okay";
+};
+
+&mipi_csi_0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_csi0_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5640_mipi_0_ep>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c_mipi_csi1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov5640_mipi_1: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&xtal24m>;
+ clock-names = "xclk";
+ pinctrl-0 = <&pinctrl_mipi_csi1>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lsio_gpio1 31 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <®_2v8>;
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
+
+ port {
+ ov5640_mipi_1_ep: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi1_in>;
+ };
+ };
+ };
+};
+
+&irqsteer_csi1 {
+ status = "okay";
+};
+
+&isi {
+ status = "okay";
+};
+
+&mipi_csi_1 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_csi1_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5640_mipi_1_ep>;
+ };
+ };
+ };
+};
reg = <0x00000000 0x80000000 0 0x40000000>;
};
+ xtal24m: clock-xtal24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal_24MHz";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
reg = <0 0x94300000 0 0x100000>;
no-map;
};
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+ size = <0 0x3c000000>;
+ linux,cma-default;
+ reusable;
+ };
};
lvds_backlight0: backlight-lvds0 {
default-brightness-level = <80>;
};
+ i2c-mux {
+ compatible = "i2c-mux-gpio";
+ mux-gpios = <&lsio_gpio5 3 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+ i2c-parent = <&i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8960: audio-codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk";
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ AVDD-supply = <®_audio_3v3>;
+ DBVDD-supply = <®_audio_1v8>;
+ DCVDD-supply = <®_audio_1v8>;
+ SPKVDD1-supply = <®_audio_5v>;
+ SPKVDD2-supply = <®_audio_5v>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8962: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ DCVDD-supply = <®_audio_1v8>;
+ DBVDD-supply = <®_audio_1v8>;
+ AVDD-supply = <®_audio_1v8>;
+ CPVDD-supply = <®_audio_1v8>;
+ MICVDD-supply = <®_audio_3v3>;
+ PLLVDD-supply = <®_audio_1v8>;
+ SPKVDD1-supply = <®_audio_5v>;
+ SPKVDD2-supply = <®_audio_5v>;
+ };
+ };
+
+ };
+
mux-controller {
compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
pinctrl-names = "default";
};
};
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_2v8: regulator-2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
reg_usdhc2_vmmc: usdhc2-vmmc {
compatible = "regulator-fixed";
regulator-name = "SD1_SPWR";
"Mic Jack", "MICB";
};
+ sound-wm8962 {
+ compatible = "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&wm8962>;
+ hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+ audio-routing = "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN1R", "AMIC",
+ "IN3R", "AMIC";
+ };
+
imx8qm-cm4-0 {
compatible = "fsl,imx8qm-cm4";
clocks = <&clk_dummy>;
scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
status = "okay";
-
- wm8960: audio-codec@1a {
- compatible = "wlf,wm8960";
- reg = <0x1a>;
- clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "mclk";
- assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
- <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
- <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
- <&mclkout0_lpcg IMX_LPCG_CLK_0>;
- assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
- wlf,shared-lrclk;
- wlf,hp-cfg = <2 2 3>;
- wlf,gpio-cfg = <1 3>;
- AVDD-supply = <®_audio_3v3>;
- DBVDD-supply = <®_audio_1v8>;
- DCVDD-supply = <®_audio_1v8>;
- SPKVDD1-supply = <®_audio_5v>;
- SPKVDD2-supply = <®_audio_5v>;
- };
};
&i2c1_lvds0 {
>;
};
+ pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020
+ IMX8QM_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020
+ >;
+ };
+
+ pinctrl_i2c_mipi_csi1: i2c-mipi-csi1grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL 0xc2000020
+ IMX8QM_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA 0xc2000020
+ >;
+ };
+
pinctrl_i2c0: i2c0grp {
fsl,pins = <
IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021
>;
};
+ pinctrl_mipi_csi0: mipi-csi0grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27 0xC0000041
+ IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 0xC0000041
+ IMX8QM_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041
+ >;
+ };
+
+ pinctrl_mipi_csi1: mipi-csi1grp {
+ fsl,pins = <
+ IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 0xC0000041
+ IMX8QM_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31 0xC0000041
+ IMX8QM_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT 0xC0000041
+ >;
+ };
+
pinctrl_pciea: pcieagrp {
fsl,pins = <
IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28 0x04000021
* Copyright 2021 NXP
*/
+&isi {
+ compatible = "fsl,imx8qm-isi";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+
+ isi_in_2: endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ isi_in_3: endpoint {
+ remote-endpoint = <&mipi_csi1_out>;
+ };
+ };
+ };
+};
+
&jpegdec {
compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
};
&jpegenc {
compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
};
+
+&mipi_csi_0 {
+ compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi0_out: endpoint {
+ remote-endpoint = <&isi_in_2>;
+ };
+ };
+ };
+};
+
+&mipi_csi_1 {
+ compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi1_out: endpoint {
+ remote-endpoint = <&isi_in_3>;
+ };
+ };
+ };
+};
+
+&pi0_ipg_lpcg {
+ status = "disabled";
+};
+
+&pi0_misc_lpcg {
+ status = "disabled";
+};
+
+&pi0_pxl_lpcg {
+ status = "disabled";
+};
compatible = "fsl,imx8qm-iomuxc";
};
+ scu_reset: reset-controller {
+ compatible = "fsl,imx-scu-reset";
+ #reset-cells = <1>;
+ };
+
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
#thermal-sensor-cells = <1>;
};
+
+ watchdog {
+ compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
};
thermal-zones {
};
/* sorted in register address */
+ #include "imx8-ss-security.dtsi"
#include "imx8-ss-cm41.dtsi"
#include "imx8-ss-audio.dtsi"
#include "imx8-ss-vpu.dtsi"
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&i2c_mipi_csi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-0 = <&pinctrl_i2c_mipi_csi0>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ov5640_mipi: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&xtal24m>;
+ clock-names = "xclk";
+ pinctrl-0 = <&pinctrl_mipi_csi0>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lsio_gpio3 7 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&lsio_gpio3 8 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <®_2v8>;
+ DVDD-supply = <®_1v5>;
+ DOVDD-supply = <®_1v8>;
+
+ port {
+ ov5640_mipi_ep: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&mipi_csi0_in>;
+ };
+ };
+ };
+};
+
+&irqsteer_csi0 {
+ status = "okay";
+};
+
+&isi {
+ status = "okay";
+};
+
+&mipi_csi_0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_csi0_in: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&ov5640_mipi_ep>;
+ };
+ };
+ };
+};
};
};
+ i2c-mux {
+ compatible = "i2c-mux-gpio";
+ mux-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */
+ i2c-parent = <&cm40_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8960: audio-codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk";
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ AVDD-supply = <®_audio_3v3>;
+ DBVDD-supply = <®_audio_1v8>;
+ DCVDD-supply = <®_audio_1v8>;
+ SPKVDD1-supply = <®_audio_5v>;
+ SPKVDD2-supply = <®_audio_5v>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8962: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ DCVDD-supply = <®_audio_1v8>;
+ DBVDD-supply = <®_audio_1v8>;
+ AVDD-supply = <®_audio_1v8>;
+ CPVDD-supply = <®_audio_1v8>;
+ MICVDD-supply = <®_audio_3v3>;
+ PLLVDD-supply = <®_audio_1v8>;
+ SPKVDD1-supply = <®_audio_5v>;
+ SPKVDD2-supply = <®_audio_5v>;
+ };
+ };
+ };
+
+ reg_1v5: regulator-1v5 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_2v8: regulator-2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
reg_pcieb: regulator-pcie {
compatible = "regulator-fixed";
regulator-max-microvolt = <3300000>;
no-map;
};
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+ size = <0 0x3c000000>;
+ linux,cma-default;
+ reusable;
+ };
+
gpu_reserved: memory@880000000 {
no-map;
reg = <0x8 0x80000000 0 0x10000000>;
"LINPUT1", "Mic Jack",
"Mic Jack", "MICB";
};
+
+ sound-wm8962 {
+ compatible = "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&wm8962>;
+ hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+ audio-routing = "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC",
+ "IN1R", "AMIC";
+ };
};
&amix {
sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>;
status = "okay";
- wm8960: audio-codec@1a {
- compatible = "wlf,wm8960";
- reg = <0x1a>;
- clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "mclk";
- assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
- <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
- <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
- <&mclkout0_lpcg IMX_LPCG_CLK_0>;
- assigned-clock-rates = <786432000>,
- <49152000>,
- <12288000>,
- <12288000>;
- wlf,shared-lrclk;
- wlf,hp-cfg = <2 2 3>;
- wlf,gpio-cfg = <1 3>;
- AVDD-supply = <®_audio_3v3>;
- DBVDD-supply = <®_audio_1v8>;
- DCVDD-supply = <®_audio_1v8>;
- SPKVDD1-supply = <®_audio_5v>;
- SPKVDD2-supply = <®_audio_5v>;
- };
-
pca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
>;
};
+ pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp {
+ fsl,pins = <
+ IMX8QXP_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020
+ IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020
+ >;
+ };
+
pinctrl_ioexp_rst: ioexprstgrp {
fsl,pins = <
IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021
>;
};
+ pinctrl_mipi_csi0: mipi-csi0grp {
+ fsl,pins = <
+ IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07 0xC0000041
+ IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08 0xC0000041
+ IMX8QXP_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041
+ >;
+ };
+
pinctrl_pcieb: pcieagrp {
fsl,pins = <
IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x06000021
* Dong Aisheng <aisheng.dong@nxp.com>
*/
+&csi1_pxl_lpcg {
+ status = "disabled";
+};
+
+&csi1_core_lpcg {
+ status = "disabled";
+};
+
+&csi1_esc_lpcg {
+ status = "disabled";
+};
+
+&gpio0_mipi_csi1 {
+ status = "disabled";
+};
+
+&i2c_mipi_csi1 {
+ status = "disabled";
+};
+
+&irqsteer_csi1 {
+ status = "disabled";
+};
+
+&isi {
+ compatible = "fsl,imx8qxp-isi";
+ reg = <0x58100000 0x60000>;
+ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+ <&pdma1_lpcg IMX_LPCG_CLK_0>,
+ <&pdma2_lpcg IMX_LPCG_CLK_0>,
+ <&pdma3_lpcg IMX_LPCG_CLK_0>,
+ <&pdma4_lpcg IMX_LPCG_CLK_0>,
+ <&pdma5_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+ power-domains = <&pd IMX_SC_R_ISI_CH0>,
+ <&pd IMX_SC_R_ISI_CH1>,
+ <&pd IMX_SC_R_ISI_CH2>,
+ <&pd IMX_SC_R_ISI_CH3>,
+ <&pd IMX_SC_R_ISI_CH4>,
+ <&pd IMX_SC_R_ISI_CH5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+
+ isi_in_2: endpoint {
+ remote-endpoint = <&mipi_csi0_out>;
+ };
+ };
+ };
+};
+
+&mipi_csi_0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_csi0_out: endpoint {
+ remote-endpoint = <&isi_in_2>;
+ };
+ };
+ };
+};
+
&jpegdec {
compatible = "nxp,imx8qxp-jpgdec";
};
&jpegenc {
compatible = "nxp,imx8qxp-jpgenc";
};
+
+&mipi_csi_1 {
+ status = "disabled";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2025 Actia Nordic AB
+ */
+
+&crypto {
+ compatible = "fsl,imx8qxp-caam", "fsl,sec-v4.0";
+};
+
+&sec_jr2 {
+ compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
+
+&sec_jr3 {
+ compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring";
+};
status = "disabled";
};
+ scu_reset: reset-controller {
+ compatible = "fsl,imx-scu-reset";
+ #reset-cells = <1>;
+ };
+
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
/* sorted in register address */
#include "imx8-ss-img.dtsi"
#include "imx8-ss-vpu.dtsi"
+ #include "imx8-ss-security.dtsi"
#include "imx8-ss-cm40.dtsi"
#include "imx8-ss-gpu0.dtsi"
#include "imx8-ss-adma.dtsi"
#include "imx8qxp-ss-img.dtsi"
#include "imx8qxp-ss-vpu.dtsi"
+#include "imx8qxp-ss-security.dtsi"
#include "imx8qxp-ss-adma.dtsi"
#include "imx8qxp-ss-conn.dtsi"
#include "imx8qxp-ss-lsio.dtsi"
<&pcc4 IMX8ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 32 24>;
+ ngpios = <24>;
};
gpiof: gpio@2d010000 {
<&pcc4 IMX8ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 64 32>;
+ ngpios = <32>;
};
per_bridge5: bus@2d800000 {
<&pcc5 IMX8ULP_CLK_RGPIOD>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 0 24>;
+ ngpios = <24>;
};
};
};
gpio = <&adp5585 6 GPIO_ACTIVE_LOW>;
};
+ reg_m2_pwr: regulator-m2-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "M.2-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
enable-active-high;
};
+ reg_usdhc3_vmmc: regulator-usdhc3 {
+ compatible = "regulator-fixed";
+ regulator-name = "WLAN_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_m2_pwr>;
+ gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+ /*
+ * IW612 wifi chip needs more delay than other wifi chips to complete
+ * the host interface initialization after power up, otherwise the
+ * internal state of IW612 may be unstable, resulting in the failure of
+ * the SDIO3.0 switch voltage.
+ */
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+
+ usdhc3_pwrseq: usdhc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+ };
+
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&adp5585 0 100000 0>;
ethphy1: ethernet-phy@1 {
reg = <1>;
- eee-broken-1000t;
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
+ realtek,clkout-disable;
};
};
};
reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
+ realtek,clkout-disable;
};
};
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
};
&micfil {
no-mmc;
};
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ vmmc-supply = <®_usdhc3_vmmc>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+};
+
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
- MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
- MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe
+ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
>;
};
MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
- MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
+ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e
MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e
MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e
MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e
MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e
- MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe
+ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e
>;
};
- pinctrl_lpi2c3: lpi2c3grp {
- fsl,pins = <
- MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
- MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
- >;
- };
-
pinctrl_fec_sleep: fecsleepgrp {
fsl,pins = <
MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e
>;
};
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
+ MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
+ MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
+ MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
+ MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
+ MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
+ >;
+ };
+
+ pinctrl_usdhc3_wlan: usdhc3wlangrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
enable-active-high;
};
+ reg_m2_pwr: regulator-m2-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "M.2-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
off-on-delay-us = <12000>;
};
+ reg_usdhc3_vmmc: regulator-usdhc3 {
+ compatible = "regulator-fixed";
+ regulator-name = "WLAN_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_m2_pwr>;
+ gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+ /*
+ * IW612 wifi chip needs more delay than other wifi chips to complete
+ * the host interface initialization after power up, otherwise the
+ * internal state of IW612 may be unstable, resulting in the failure of
+ * the SDIO3.0 switch voltage.
+ */
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+
reg_vdd_12v: regulator-vdd-12v {
compatible = "regulator-fixed";
regulator-name = "reg_vdd_12v";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ usdhc3_pwrseq: usdhc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+ };
};
&adc1 {
status = "okay";
};
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ vmmc-supply = <®_usdhc3_vmmc>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+};
+
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
>;
};
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
+ MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
+ MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
+ MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
+ MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
+ MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
+ >;
+ };
+
+ pinctrl_usdhc3_wlan: usdhc3wlangrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
enable-active-high;
};
+ reg_m2_pwr: regulator-m2-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "M.2-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_rpi_3v3: regulator-rpi {
compatible = "regulator-fixed";
regulator-name = "VDD_RPI_3V3";
off-on-delay-us = <12000>;
};
+ reg_usdhc3_vmmc: regulator-usdhc3 {
+ compatible = "regulator-fixed";
+ regulator-name = "WLAN_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_m2_pwr>;
+ gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
+ /*
+ * IW612 wifi chip needs more delay than other wifi chips to complete
+ * the host interface initialization after power up, otherwise the
+ * internal state of IW612 may be unstable, resulting in the failure of
+ * the SDIO3.0 switch voltage.
+ */
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+
sound-bt-sco {
compatible = "simple-audio-card";
simple-audio-card,name = "bt-sco-audio";
"IN3R", "AMIC",
"IN1R", "AMIC";
};
+
+ usdhc3_pwrseq: usdhc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
+ };
};
&adc1 {
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
- eee-broken-1000t;
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
interrupt-parent = <&pcal6524>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
+
+ inertial-meter@6a {
+ compatible = "st,lsm6dso";
+ reg = <0x6a>;
+ };
};
&lpi2c2 {
status = "okay";
};
+&lpuart5 {
+ /* BT */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
&micfil {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
status = "okay";
};
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ vmmc-supply = <®_usdhc3_vmmc>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+};
+
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
>;
};
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+ usdhc3_pwrseq: usdhc3-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&lpuart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+/*
+ * NOTE: When uSDHC3 port is multiplexed on GPIO_IO[27:22] pads, it only
+ * supports 50 MHz mode, due to introduction of potential variations in
+ * trace impedance, drive strength, and timing skew. Refer to i.MX 93
+ * Application Processors Data Sheet, Rev. 3, page 60 for more details.
+ */
+&usdhc3 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+ pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ wakeup-source;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__USDHC3_CLK 0x179e
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000178e
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__USDHC3_CLK 0x31e
+ MX93_PAD_SD3_CMD__USDHC3_CMD 0x31e
+ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x31e
+ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x31e
+ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x31e
+ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x31e
+ >;
+ };
+
+ pinctrl_wlbt: wlbtgrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e /* WAKE_DEV */
+ MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e /* WAKE_HOST */
+ MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e /* PDn */
+ >;
+ };
+};
"fsl,imx93";
aliases {
- ethernet0 = &fec;
ethernet1 = &eqos;
rtc0 = &i2c_rtc;
rtc1 = &bbnsm_rtc;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
};
-
- reg_vref_1v8: regulator-adc-vref {
- compatible = "regulator-fixed";
- regulator-name = "VREF_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
};
/* ADC */
&adc1 {
- vref-supply = <®_vref_1v8>;
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ button-s2 {
+ label = "sleep";
+ linux,code = <KEY_SLEEP>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ user-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_user_leds>;
+
+ user-led2 {
+ gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e
+ >;
+ };
+
+ pinctrl_user_leds: userledsgrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+ usdhc3_pwrseq: usdhc3-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <60>;
+ reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&lpuart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ };
+};
+
+&usdhc3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>;
+ pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ no-1-8-v;
+ status = "okay";
+
+ brmcf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
+&iomuxc {
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
+ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ >;
+ };
+
+ /* need to config the SION for data and cmd pad, refer to ERR052021 */
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__USDHC3_CLK 0x179e
+ MX93_PAD_GPIO_IO23__USDHC3_CMD 0x4000139e
+ MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x4000139e
+ MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x4000139e
+ MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x4000139e
+ MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x4000139e
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3sleepgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO22__USDHC3_CLK 0x31e
+ MX93_PAD_GPIO_IO23__USDHC3_CMD 0x31e
+ MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x31e
+ MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x31e
+ MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x31e
+ MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x31e
+ >;
+ };
+
+ pinctrl_wlbt: wlbtgrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e /* BT ENABLE */
+ MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e /* WLAN ENABLE */
+ MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e /* HOST WAKEUP */
+ >;
+ };
+};
"fsl,imx93";
aliases {
+ ethernet1 = &eqos;
rtc0 = &i2c_rtc;
rtc1 = &bbnsm_rtc;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Primoz Fiser <primoz.fiser@norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rsc_table: rsc-table@2021e000 {
+ reg = <0 0x2021e000 0 0x1000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0@a4000000 {
+ reg = <0 0xa4000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@a4008000 {
+ reg = <0 0xa4008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@a4010000 {
+ reg = <0 0xa4010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@a4018000 {
+ reg = <0 0xa4018000 0 0x8000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@a4020000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa4020000 0 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&cm33 {
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu1 0 1>,
+ <&mu1 1 1>,
+ <&mu1 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+ status = "okay";
+};
+
+&mu1 {
+ status = "okay";
+};
model = "PHYTEC phyCORE-i.MX93";
compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+ aliases {
+ ethernet0 = &fec;
+ };
+
reserved-memory {
ranges;
#address-cells = <2>;
linux,default-trigger = "heartbeat";
};
};
+
+ reg_vdda_1v8: regulator-vdda-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&buck5>;
+ };
+};
+
+/* ADC */
+&adc1 {
+ vref-supply = <®_vdda_1v8>;
};
/* Ethernet */
/* Watchdog */
&wdog3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
status = "okay";
};
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
+ >;
+ };
};
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
- * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Markus Niebel
*/
model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
compatible = "tq,imx93-tqma9352", "fsl,imx93";
+ memory@80000000 {
+ device_type = "memory";
+ /* our minimum RAM config will be 1024 MiB */
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
};
};
-&gpio1 {
- pmic-irq-hog {
- gpio-hog;
- gpios = <3 GPIO_ACTIVE_LOW>;
- input;
- line-name = "PMIC_IRQ#";
- };
-};
-
&lpi2c1 {
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
regulator-ramp-delay = <3125>;
};
- /* V_DDRQ - 1.1 LPDDR4 or 0.6 LPDDR4X */
+ /* V_DDRQ - 0.6 V for LPDDR4X */
buck2: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1100000>;
+ regulator-max-microvolt = <600000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */
<&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */
};
-
- reg_eqos_phy: regulator-eqos-phy {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_eqos_phy>;
- regulator-name = "eth_phy_pwr";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- startup-delay-us = <100000>;
- regulator-always-on;
- };
};
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
phy-mode = "rgmii";
phy-handle = <ðphy0>;
+ snps,clk-csr = <5>;
status = "okay";
mdio {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
eee-broken-1000t;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
};
};
};
MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
- MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
+ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
- MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe
+ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
+ MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e
>;
};
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
- <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; // err
clocks = <&clk IMX93_CLK_EDMA1_GATE>;
clock-names = "dma";
};
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_EDMA2_GATE>;
clock-names = "dma";
};
<&clk IMX93_CLK_GPIO2_GATE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc 0 4 30>;
+ ngpios = <30>;
};
gpio3: gpio@43820000 {
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
<&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+ ngpios = <32>;
};
gpio4: gpio@43830000 {
<&clk IMX93_CLK_GPIO4_GATE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+ ngpios = <30>;
};
gpio1: gpio@47400000 {
<&clk IMX93_CLK_GPIO1_GATE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc 0 92 16>;
+ ngpios = <16>;
};
ocotp: efuse@47510000 {
};
};
+ mqs1: mqs1 {
+ compatible = "fsl,imx943-aonmix-mqs";
+ status = "disabled";
+ };
+
+ mqs2: mqs2 {
+ compatible = "fsl,imx943-wakeupmix-mqs";
+ status = "disabled";
+ };
+
pmu {
compatible = "arm,cortex-a55-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&scmi_iomuxc 0 4 32>;
+ ngpios = <32>;
};
gpio3: gpio@43820000 {
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&scmi_iomuxc 0 36 26>;
+ ngpios = <26>;
};
gpio4: gpio@43840000 {
gpio-controller;
gpio-ranges = <&scmi_iomuxc 0 62 4>, <&scmi_iomuxc 4 0 4>,
<&scmi_iomuxc 8 140 12>, <&scmi_iomuxc 20 164 12>;
+ ngpios = <32>;
};
gpio5: gpio@43850000 {
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&scmi_iomuxc 0 108 32>;
+ ngpios = <32>;
};
gpio6: gpio@43860000 {
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&scmi_iomuxc 0 66 32>;
+ ngpios = <32>;
};
gpio7: gpio@43870000 {
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&scmi_iomuxc 0 98 10>, <&scmi_iomuxc 16 152 12>;
+ gpio-reserved-ranges = <10 6>;
+ ngpios = <28>;
};
aips1: bus@44000000 {
compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan";
reg = <0x443a0000 0x10000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+ <&scmi_clk IMX94_CLK_CAN1>;
+ clock-names = "ipg", "per";
+ assigned-clocks = <&scmi_clk IMX94_CLK_CAN1>;
+ assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+ assigned-clock-rates = <80000000>;
+ fsl,clk-source = /bits/ 8 <0>;
status = "disabled";
};
status = "disabled";
};
+ micfil: micfil@44520000 {
+ compatible = "fsl,imx943-micfil";
+ reg = <0x44520000 0x10000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX94_CLK_BUSAON>,
+ <&scmi_clk IMX94_CLK_PDM>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+ <&dummy>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k", "clkext3";
+ dmas = <&edma1 6 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>;
+ dma-names = "rx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
adc1: adc@44530000 {
compatible = "nxp,imx94-adc", "nxp,imx93-adc";
reg = <0x44530000 0x10000>;
model = "NXP i.MX943 EVK board";
aliases {
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c5 = &lpi2c6;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
serial0 = &lpuart1;
};
+ bt_sco_codec: bt-sco-codec {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
chosen {
stdout-path = &lpuart1;
};
+ dmic: dmic {
+ compatible = "dmic-codec";
+ #sound-dai-cells = <0>;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
off-on-delay-us = <12000>;
enable-active-high;
};
+ reg_audio_pwr: regulator-wm8962-pwr {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "audio-pwr";
+ gpio = <&pcal6416_i2c3_u171 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reserved-memory {
ranges;
#address-cells = <2>;
};
};
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,bitclock-master = <&btcpu>;
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,name = "bt-sco-audio";
+
+ simple-audio-card,codec {
+ sound-dai = <&bt_sco_codec 1>;
+ };
+
+ btcpu: simple-audio-card,cpu {
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ sound-dai = <&sai3>;
+ };
+ };
+
+ sound-micfil {
+ compatible = "fsl,imx-audio-card";
+ model = "micfil-audio";
+
+ pri-dai-link {
+ format = "i2s";
+ link-name = "micfil hifi";
+
+ codec {
+ sound-dai = <&dmic>;
+ };
+
+ cpu {
+ sound-dai = <&micfil>;
+ };
+ };
+ };
+
+ sound-wm8962 {
+ compatible = "fsl,imx-audio-wm8962";
+ audio-codec = <&wm8962>;
+ audio-cpu = <&sai1>;
+ audio-routing = "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC",
+ "IN1R", "AMIC";
+ hp-det-gpio = <&pcal6416_i2c3_u48 14 GPIO_ACTIVE_HIGH>;
+ model = "wm8962-audio";
+ };
+
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x80000000>;
device_type = "memory";
};
};
+&lpi2c3 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pca9670_i2c3: gpio@23 {
+ compatible = "nxp,pca9670";
+ reg = <0x23>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ pca9548_i2c3: i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8962: codec@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&scmi_clk IMX94_CLK_SAI1>;
+ AVDD-supply = <®_audio_pwr>;
+ CPVDD-supply = <®_audio_pwr>;
+ DBVDD-supply = <®_audio_pwr>;
+ DCVDD-supply = <®_audio_pwr>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0000 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x0000 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ MICVDD-supply = <®_audio_pwr>;
+ PLLVDD-supply = <®_audio_pwr>;
+ SPKVDD1-supply = <®_audio_pwr>;
+ SPKVDD2-supply = <®_audio_pwr>;
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcal6416_i2c3_u46: gpio@20 {
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sd-card-on-hog {
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+ };
+
+ pcal6416_i2c3_u171: gpio@21 {
+ compatible = "nxp,pcal6416";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ audio-pwren-hog {
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+
+ mqs-mic-sel-hog {
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-low;
+ };
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcal6416_i2c3_u48: gpio@20 {
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio3>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ pinctrl-0 = <&pinctrl_ioexpander_int>;
+ pinctrl-names = "default";
+ };
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcal6408_i2c3_u172: gpio@20 {
+ compatible = "nxp,pcal6408";
+ reg = <0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio3>;
+ /* shared int pin with u48 */
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
+};
+
+&lpi2c4 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lpi2c6 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c6>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ pca9544_i2c6: i2c-mux@77 {
+ compatible = "nxp,pca9544";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcal6416_i2c6_u50: gpio@21 {
+ compatible = "nxp,pcal6416";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcal6408_i2c6_u170: gpio@20 {
+ compatible = "nxp,pcal6408";
+ reg = <0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ pinctrl-0 = <&pinctrl_ioexpander_int2>;
+ pinctrl-names = "default";
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcal6416_i2c6_u44: gpio@20 {
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ /* pdm selection */
+ can-pdm-sel-hog {
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-low;
+ };
+
+ sai3-sel-hog {
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+
+ /* eMMC IOMUX selection */
+ sd1-sel-hog {
+ gpios = <0 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+
+ /* SD card IOMUX selection */
+ sd2-sel-hog {
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+ };
+ };
+ };
+};
+
&lpuart1 {
pinctrl-0 = <&pinctrl_uart1>;
pinctrl-names = "default";
status = "okay";
};
+&micfil {
+ assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX94_CLK_PDM>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <49152000>;
+ pinctrl-0 = <&pinctrl_pdm>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sai1 {
+ assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX94_CLK_SAI1>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ pinctrl-0 = <&pinctrl_sai1>;
+ pinctrl-names = "default";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&sai3 {
+ assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX94_CLK_SAI3>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX94_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ pinctrl-0 = <&pinctrl_sai3>;
+ pinctrl-names = "default";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&scmi_iomuxc {
+
+ pinctrl_ioexpander_int2: ioexpanderint2grp {
+ fsl,pins = <
+ IMX94_PAD_CCM_CLKO4__GPIO4_IO3 0x31e
+ >;
+ };
+
+ pinctrl_ioexpander_int: ioexpanderintgrp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO45__GPIO3_IO13 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO16__LPI2C3_SDA 0x40000b9e
+ IMX94_PAD_GPIO_IO17__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c4: lpi2c4grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO18__LPI2C4_SDA 0x40000b9e
+ IMX94_PAD_GPIO_IO19__LPI2C4_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c6: lpi2c6grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO29__LPI2C6_SDA 0x40000b9e
+ IMX94_PAD_GPIO_IO28__LPI2C6_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ IMX94_PAD_PDM_CLK__PDM_CLK 0x31e
+ IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x31e
+ IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x31e
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e
+ IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e
+ IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x31e
+ IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x31e
+ IMX94_PAD_I2C2_SDA__SAI1_MCLK 0x31e
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK 0x31e
+ IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC 0x31e
+ IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0 0x31e
+ IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0 0x31e
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
IMX94_PAD_UART1_TXD__LPUART1_TX 0x31e
<0x60 &its 0x66 0x1>, //ENETC1 VF1
<0x80 &its 0x64 0x1>, //ENETC2 PF
<0xc0 &its 0x67 0x1>;
+ iommu-map = <0x0 &smmu 0x20 0x1>,
+ <0x10 &smmu 0x21 0x1>,
+ <0x20 &smmu 0x22 0x1>,
+ <0x40 &smmu 0x23 0x1>,
+ <0x50 &smmu 0x25 0x1>,
+ <0x60 &smmu 0x26 0x1>,
+ <0x80 &smmu 0x24 0x1>,
+ <0xc0 &smmu 0x27 0x1>;
};
&netc_emdio {
&usb3_phy {
orientation-switch;
+ fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+ fsl,phy-pcs-tx-swing-full-percent = <100>;
fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+ fsl,phy-tx-vboost-level-microvolt = <1156>;
status = "okay";
port {
};
};
+ flexcan1_phy: can-phy0 {
+ compatible = "nxp,tjr1443";
+ #phy-cells = <0>;
+ max-bitrate = <8000000>;
+ enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>;
+ standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>;
+ };
+
+ flexcan2_phy: can-phy1 {
+ compatible = "nxp,tjr1443";
+ #phy-cells = <0>;
+ max-bitrate = <8000000>;
+ enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>;
+ standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vref_1v8: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "+V1.8_SW";
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-max-microvolt = <3300000>;
};
};
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
&enetc_port0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enetc0>;
status = "okay";
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ phys = <&flexcan1_phy>;
+ status = "disabled";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ phys = <&flexcan2_phy>;
+ status = "okay";
+};
+
&flexspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi1>;
};
};
+&lpi2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ status = "okay";
+
+ adp5585: io-expander@34 {
+ compatible = "adi,adp5585-00", "adi,adp5585";
+ reg = <0x34>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-reserved-ranges = <5 1>;
+ #pwm-cells = <3>;
+ };
+};
+
+&lpi2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ i2c3_gpio_expander_20: gpio@20 {
+ compatible = "nxp,pcal6408";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x20>;
+ vcc-supply = <®_3p3v>;
+ };
+};
+
&lpi2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
status = "okay";
};
+&lpuart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "disabled";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+&lpspi7 {
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi7>;
+ cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&micfil {
#sound-dai-cells = <0>;
pinctrl-names = "default";
ethphy0: ethernet-phy@1 {
reg = <1>;
+ reset-gpios = <&i2c5_pcal6408 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <80000>;
realtek,clkout-disable;
};
};
+&netc_timer {
+ status = "okay";
+};
+
&pcie0 {
pinctrl-0 = <&pinctrl_pcie0>;
pinctrl-names = "default";
status = "okay";
};
+&tpm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm3>;
+ status = "okay";
+};
+
&usb2 {
dr_mode = "host";
disable-over-current;
};
&usb3_phy {
+ fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+ fsl,phy-pcs-tx-swing-full-percent = <100>;
fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+ fsl,phy-tx-vboost-level-microvolt = <1156>;
orientation-switch;
status = "okay";
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x39e
+ IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x39e
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO25__CAN2_TX 0x39e
+ IMX95_PAD_GPIO_IO27__CAN2_RX 0x39e
+ >;
+ };
+
pinctrl_flexspi1: flexspi1grp {
fsl,pins = <
IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe
>;
};
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e
+ IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e
+ IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO00__LPI2C3_SDA 0x40000b9e
+ IMX95_PAD_GPIO_IO01__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
pinctrl_lpi2c4: lpi2c4grp {
fsl,pins = <
IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e
>;
};
+ pinctrl_lpspi7: lpspi7grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4 0x3fe
+ IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x3fe
+ IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x3fe
+ IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x3fe
+ >;
+ };
+
pinctrl_pcie0: pcie0grp {
fsl,pins = <
IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e
>;
};
+ pinctrl_tpm3: tpm3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO12__TPM3_CH2 0x51e
+ >;
+ };
+
pinctrl_tpm6: tpm6grp {
fsl,pins = <
IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e
>;
};
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
+ IMX95_PAD_DAP_TDI__LPUART5_RX 0x31e
+ IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
+ IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
- IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe
- IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe
- IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
- IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
- IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
- IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx95-phycore-fpsc.dtsi"
+
+/ {
+ compatible = "phytec,imx95-libra-rdk-fpsc",
+ "phytec,imx95-phycore-fpsc", "fsl,imx95";
+ model = "PHYTEC Libra i.MX95 RDK FPSC";
+
+ aliases {
+ can1 = &flexcan2;
+ can2 = &flexcan1;
+ ethernet0 = &enetc_port0;
+ serial0 = &lpuart7;
+ serial1 = &lpuart8;
+ };
+
+ chosen {
+ stdout-path = &lpuart7;
+ };
+
+ backlight_lvds0: backlight0 {
+ compatible = "pwm-backlight";
+ pinctrl-0 = <&pinctrl_lvds0>;
+ power-supply = <®_vdd_12v0>;
+ status = "disabled";
+ };
+
+ transceiver1: can-phy {
+ compatible = "ti,tcan1043";
+ #phy-cells = <0>;
+ max-bitrate = <8000000>;
+ enable-gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+ };
+
+ transceiver2: can-phy {
+ compatible = "ti,tcan1043";
+ #phy-cells = <0>;
+ max-bitrate = <8000000>;
+ enable-gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+ };
+
+ panel0_lvds: panel-lvds0 {
+ backlight = <&backlight_lvds0>;
+ power-supply = <®_vdd_3v3>;
+ status = "disabled";
+ };
+
+ reg_vdd_12v0: regulator-vdd-12v0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <12000000>;
+ regulator-min-microvolt = <12000000>;
+ regulator-name = "VDD_12V0";
+ };
+
+ reg_vdd_1v8: regulator-vdd-1v8 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "VDD_1V8";
+ };
+
+ reg_vdd_3v3: regulator-vdd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDD_3V3";
+ };
+
+ reg_vdd_5v0: regulator-vdd-5v0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "VDD_5V0";
+ };
+};
+
+&enetc_port0 {
+ phy-handle = <ðphy0>;
+ status = "okay";
+};
+
+&enetc_port2 {
+ managed = "in-band-status";
+ phy-handle = <ðphy2>;
+ phy-mode = "10gbase-r";
+};
+
+/* CAN FD */
+&flexcan1 {
+ phys = <&transceiver1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ phys = <&transceiver2>;
+ status = "okay";
+};
+
+/* SPI-NOR */
+&flexspi1 {
+ pinctrl-0 = <&pinctrl_flexspi>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ spi_nor: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <166000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ vcc-supply = <®_vdd_1v8>;
+ };
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "RGMII2_nINT", "GPIO4", "RTC_INT", "",
+ "LVDS1_BL_EN";
+};
+
+&lpi2c1 {
+ temperature-sensor@4f {
+ compatible = "nxp,p3t1755";
+ reg = <0x4f>;
+ vs-supply = <®_vdd_1v8>;
+ };
+};
+
+&lpi2c3 {
+ status = "okay";
+
+ leds@62 {
+ compatible = "nxp,pca9533";
+ reg = <0x62>;
+
+ led-1 {
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led-2 {
+ type = <PCA9532_TYPE_LED>;
+ };
+
+ led-3 {
+ type = <PCA9532_TYPE_LED>;
+ };
+ };
+};
+
+&lpi2c4 {
+ status = "okay";
+
+ gpio_expander: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3",
+ "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2",
+ "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV",
+ "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE",
+ "PCIE2_nWAKE", "PCIE2_nALERT_3V3",
+ "UART1_BT_RS_SEL", "UART1_RS232_485_SEL";
+ vcc-supply = <®_vdd_1v8>;
+
+ uart1_bt_rs_sel: bt-rs-hog {
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ line-name = "UART1_BT_RS_SEL";
+ output-low;
+ };
+ };
+};
+
+&lpi2c5 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ vcc-supply = <®_vdd_1v8>;
+ };
+};
+
+/* Used for M33 debug */
+&lpuart2 {
+ pinctrl-0 = <&pinctrl_lpuart2>;
+ pinctrl-names = "default";
+};
+
+/* A-55 debug UART */
+&lpuart7 {
+ status = "okay";
+};
+
+/* RS232/RS485/BT */
+&lpuart8 {
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&netc_emdio { /* RGMII2 */
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ enet-phy-lane-no-swap;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+
+ ethphy2: ethernet-phy@8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x8>;
+ max-speed = <10000>; /* 10Gbit/s */
+ status = "disabled";
+ };
+};
+
+&pcie0 {
+ reset-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <®_vdd_3v3>;
+ status = "okay";
+};
+
+&pcie1 {
+ reset-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <®_vdd_3v3>;
+ status = "okay";
+};
+
+&rv3028 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ aux-voltage-chargeable = <1>;
+ wakeup-source;
+ trickle-resistor-ohms = <3000>;
+};
+
+&scmi_iomuxc {
+ pinctrl_lpuart2: lpuart2grp { /* FPSC proprietary */
+ fsl,pins = <
+ IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x31e
+ IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x31e
+ >;
+ };
+
+ pinctrl_lvds0: lvds0grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20 0x31e
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e
+ >;
+ };
+
+ pinctrl_tpm4: tpm4grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO21__TPM4_CH1 0x51e
+ >;
+ };
+};
+
+&tpm4 {
+ pinctrl-0 = <&pinctrl_tpm4>;
+ pinctrl-names = "default";
+};
+
+&usb3 {
+ fsl,over-current-active-low;
+ fsl,power-active-low;
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb3_phy {
+ vbus-supply = <®_vdd_5v0>;
+ status = "okay";
+};
+
+/* uSD Card */
+&usdhc2 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 PHYTEC Messtechnik GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx95.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-i.MX95 FPSC";
+ compatible = "phytec,imx95-phycore-fpsc", "fsl,imx95";
+
+ aliases {
+ ethernet1 = &enetc_port1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c5;
+ i2c3 = &lpi2c3;
+ i2c4 = &lpi2c4;
+ i2c5 = &lpi2c1;
+ rtc0 = &rv3028;
+ rtc1 = &scmi_bbm;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
+ };
+
+ reg_nvcc_aon: regulator-nvcc-aon {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "VDD_IO";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ off-on-delay-us = <12000>;
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ pinctrl-names = "default";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VDDSW_SD2";
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0x80000000 0 0x7f000000>;
+ reusable;
+ size = <0 0x3c000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&enetc_port0 { /* FPSC RGMII2 */
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_enetc0>;
+ pinctrl-names = "default";
+};
+
+&enetc_port1 {
+ phy-handle = <ðphy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-0 = <&pinctrl_enetc1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&flexcan1 { /* FPSC CAN1 */
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ pinctrl-names = "default";
+};
+
+&flexcan2 { /* FPSC CAN2 */
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-names = "default";
+};
+
+&flexspi1 { /* FPSC QSPI */
+ pinctrl-0 = <&pinctrl_flexspi>;
+ pinctrl-names = "default";
+};
+
+&gpio1 { /* FPSC GPIO */
+ gpio-line-names = "", "", "", "", "GPIO2",
+ "GPIO1", "", "", "", "",
+ "PCIE1_nPERST", "USB1_PWR_EN", "GPIO3", "USB2_PWR_EN", "PCIE2_nPERST";
+ pinctrl-0 = <&pinctrl_gpio1>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gpio2 { /* FPSC GPIO */
+ gpio-line-names = "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "RGMII2_nINT", "GPIO4";
+ pinctrl-0 = <&pinctrl_gpio2>;
+ pinctrl-names = "default";
+};
+
+&gpio3 {
+ gpio-line-names = "", "", "", "", "",
+ "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+ gpio-line-names = "ENET2_nINT";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "USB1_OC", "USB2_OC";
+};
+
+&lpi2c1 { /* FPSC I2C5 */
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c1>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ dram_sense: temperature-sensor@48 {
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ emmc_sense: temperature-sensor@49 {
+ compatible = "ti,tmp102";
+ reg = <0x49>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ ethphy_sense: temperature-sensor@4a {
+ compatible = "ti,tmp102";
+ reg = <0x4a>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ pmic_sense: temperature-sensor@4b {
+ compatible = "ti,tmp102";
+ reg = <0x4b>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ /* User EEPROM */
+ eeprom@50 {
+ compatible = "st,24c32", "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ vcc-supply = <®_nvcc_aon>;
+ };
+
+ /* Factory EEPROM */
+ eeprom@51 {
+ compatible = "st,24c32", "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ vcc-supply = <®_nvcc_aon>;
+ };
+
+ rv3028: rtc@52 {
+ compatible = "microcrystal,rv3028";
+ reg = <0x52>;
+ };
+
+ /* User EEPROM ID page */
+ eeprom@58 {
+ compatible = "st,24c32", "atmel,24c32";
+ reg = <0x58>;
+ pagesize = <32>;
+ vcc-supply = <®_nvcc_aon>;
+ };
+};
+
+&lpi2c2 { /* FPSC I2C1 */
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-names = "default";
+};
+
+&lpi2c3 { /* FPSC I2C3 */
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-names = "default";
+};
+
+&lpi2c4 { /* FPSC I2C4 */
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c4>;
+ pinctrl-names = "default";
+};
+
+&lpi2c5 { /* FPSC I2C2 */
+ clock-frequency = <400000>;
+ pinctrl-0 = <&pinctrl_lpi2c5>;
+ pinctrl-names = "default";
+};
+
+&lpspi3 { /* FPSC SPI2 */
+ pinctrl-0 = <&pinctrl_lpspi3>;
+ pinctrl-names = "default";
+};
+
+&lpspi4 { /* FPSC SPI3 */
+ pinctrl-0 = <&pinctrl_lpspi4>;
+ pinctrl-names = "default";
+};
+
+&lpspi7 { /* FPSC SPI1 */
+ pinctrl-0 = <&pinctrl_lpspi7>;
+ pinctrl-names = "default";
+};
+
+&lpuart5 { /* FPSC UART2 */
+ pinctrl-0 = <&pinctrl_lpuart5>;
+ pinctrl-names = "default";
+};
+
+&lpuart7 { /* FPSC UART3 */
+ pinctrl-0 = <&pinctrl_lpuart7>;
+ pinctrl-names = "default";
+};
+
+&lpuart8 { /* FPSC UART1 */
+ pinctrl-0 = <&pinctrl_lpuart8>;
+ pinctrl-names = "default";
+};
+
+&netc_blk_ctrl {
+ status = "okay";
+};
+
+&netc_emdio { /* FPSC RGMII2 */
+ pinctrl-0 = <&pinctrl_emdio>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ethphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ enet-phy-lane-no-swap;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+};
+
+&netcmix_blk_ctrl {
+ status = "okay";
+};
+
+&pcie0 { /* FPSC PCIE1 */
+ pinctrl-0 = <&pinctrl_pcie0>;
+ pinctrl-names = "default";
+};
+
+&pcie1 { /* FPSC PCIE2 */
+ pinctrl-0 = <&pinctrl_pcie1>;
+ pinctrl-names = "default";
+};
+
+&sai5 { /* FPSC SAI1 */
+ pinctrl-0 = <&pinctrl_sai5>;
+ pintrc-names = "default";
+};
+
+&scmi_iomuxc {
+ pinctrl_emdio: emdiogrp {
+ fsl,pins = <
+ IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e /* RGMII2_MDIO */
+ IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x502 /* RGMII2_MDC */
+ >;
+ };
+
+ pinctrl_enetc0: enetc0grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16 0x31e /* RGMII2_nINT */
+ IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2 0x31e /* RGMII2_EVENT_IN */
+ IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2 0x31e /* RGMII2_EVENT_OUT */
+
+ IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e /* RGMII2_TX_3 */
+ IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e /* RGMII2_TX_2 */
+ IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e /* RGMII2_TX_1 */
+ IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e /* RGMII2_TX_0 */
+ IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e /* RGMII2_TX_CTL */
+ IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e /* RGMII2_TXC */
+ IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e /* RGMII2_RX_3 */
+ IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e /* RGMII2_RX_2 */
+ IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e /* RGMII2_RX_1 */
+ IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e /* RGMII2_RX_0 */
+ IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e /* RGMII2_RX_CTL */
+ IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e /* RGMII2_RXC */
+ >;
+ };
+
+ pinctrl_enetc1: enetc1grp {
+ fsl,pins = <
+ IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0 0x31e
+ IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x57e
+ IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x57e
+ IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x57e
+ IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x57e
+ IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e
+ IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e
+ IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e
+ IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e
+ IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e
+ IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e
+ IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e
+ IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x51e /* CAN1_TX */
+ IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x51e /* CAN1_RX */
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO25__CAN2_TX 0x51e /* CAN2_TX */
+ IMX95_PAD_GPIO_IO27__CAN2_RX 0x51e /* CAN2_RX */
+ >;
+ };
+
+ pinctrl_flexspi: flexspigrp {
+ fsl,pins = <
+ IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe /* QSPI_CE */
+ IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe /* QSPI_CLK */
+ IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe /* QSPI_DATA_0 */
+ IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe /* QSPI_DATA_1 */
+ IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe /* QSPI_DATA_2 */
+ IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe /* QSPI_DATA_3 */
+ IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe /* QSPI_DQS */
+ >;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <
+ IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5 0x31e /* GPIO1 */
+ IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4 0x31e /* GPIO2 */
+ IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12 0x31e /* GPIO3 */
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17 0x31e /* GPIO4 */
+ >;
+ };
+
+ pinctrl_lpi2c1: lpi2c1grp {
+ fsl,pins = <
+ IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e /* I2C5_SCL */
+ IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e /* I2C5_SDA */
+ >;
+ };
+
+ pinctrl_lpi2c2: lpi2c2grp {
+ fsl,pins = <
+ IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e /* I2C1_SDA_DNU */
+ IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e /* I2C1_SCL_DNU */
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e /* I2C3_SDA */
+ IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e /* I2C3_SCL */
+ >;
+ };
+
+ pinctrl_lpi2c4: lpi2c4grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e /* I2C4_SDA */
+ IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e /* I2C4_SDL */
+ >;
+ };
+
+ pinctrl_lpi2c5: lpi2c5grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e /* I2C2_SDA */
+ IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e /* I2C2_SCL */
+ >;
+ };
+
+ pinctrl_lpspi3: lpspi3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO11__LPSPI3_SCK 0x51e /* SPI2_SCLK */
+ IMX95_PAD_GPIO_IO10__LPSPI3_SOUT 0x51e /* SPI2_MOSI */
+ IMX95_PAD_GPIO_IO09__LPSPI3_SIN 0x51e /* SPI2_MISO */
+ IMX95_PAD_GPIO_IO08__LPSPI3_PCS0 0x51e /* SPI2_CS */
+ >;
+ };
+
+ pinctrl_lpspi4: lpspi4grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO21__LPSPI4_SCK 0x51e /* SPI3_SCLK */
+ IMX95_PAD_GPIO_IO20__LPSPI4_SOUT 0x51e /* SPI3_MOSI */
+ IMX95_PAD_GPIO_IO19__LPSPI4_SIN 0x51e /* SPI3_MISO */
+ IMX95_PAD_GPIO_IO18__LPSPI4_PCS0 0x51e /* SPI3_CS */
+ >;
+ };
+
+ pinctrl_lpspi7: lpspi7grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x51e /* SPI1_SCLK */
+ IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x51e /* SPI1_MOSI */
+ IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x51e /* SPI1_MISO */
+ IMX95_PAD_GPIO_IO04__LPSPI7_PCS0 0x51e /* SPI1_CS */
+ >;
+ };
+
+ pinctrl_lpuart5: lpuart5grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO01__LPUART5_RX 0x51e /* UART2_RXD */
+ IMX95_PAD_GPIO_IO00__LPUART5_TX 0x51e /* UART2_TXD */
+ IMX95_PAD_GPIO_IO03__LPUART5_RTS_B 0x51e /* UART2_RTS */
+ IMX95_PAD_GPIO_IO02__LPUART5_CTS_B 0x51e /* UART2_CTS */
+ >;
+ };
+
+ pinctrl_lpuart7: lpuart7grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO37__LPUART7_RX 0x31e /* UART3_RXD */
+ IMX95_PAD_GPIO_IO36__LPUART7_TX 0x31e /* UART3_TXD */
+ >;
+ };
+
+ pinctrl_lpuart8: lpuart8grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO13__LPUART8_RX 0x51e /* UART1_RXD */
+ IMX95_PAD_GPIO_IO12__LPUART8_TX 0x51e /* UART1_TXD */
+ IMX95_PAD_GPIO_IO15__LPUART8_RTS_B 0x51e /* UART1_RTS */
+ IMX95_PAD_GPIO_IO14__LPUART8_CTS_B 0x51e /* UART1_CTS */
+ >;
+ };
+
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x31e /* PCIE1_nCLKREQ */
+ IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10 0x31e /* PCIE1_nPERST */
+ >;
+ };
+
+ pinctrl_pcie1: pcie1grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x31e /* PCIE2_nCLKREQ */
+ IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14 0x31e /* PCIE2_nPERST */
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e
+ >;
+ };
+
+ pinctrl_sai5: sai5grp {
+ fsl,pins = <
+ IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC 0x51e /* SAI1_RX_SYNC */
+ IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK 0x51e /* SAI1_RX_BCLK */
+ IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x51e /* SAI1_RX_DATA */
+ IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x51e /* SAI1_TX_SYNC */
+ IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x51e /* SAI1_TX_BCLK */
+ IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x51e /* SAI1_TX_DATA */
+ >;
+ };
+
+ pinctrl_tpm3: tpm3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO24__TPM3_CH3 0x51e /* PWM1 */
+ >;
+ };
+
+ pinctrl_tpm5: tpm5grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO26__TPM5_CH3 0x51e /* PWM2 */
+ >;
+ };
+
+ pinctrl_usbc: usbcgrp {
+ fsl,pins = <
+ IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11 0x51e /* USB1_PWR_EN */
+ IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x51e /* USB1_OC */
+ >;
+ };
+
+ pinctrl_usb2: usb2grp {
+ fsl,pins = <
+ IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13 0x51e /* USB2_PWR_EN */
+ IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x51e /* USB2_OC */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e /* CLK */
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e /* CMD */
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e /* DATA0 */
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e /* DATA1 */
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e /* DATA2 */
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e /* DATA3 */
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e /* CLK */
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e /* CMD */
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e /* DATA0 */
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e /* DATA1 */
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e /* DATA2 */
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e /* DATA3 */
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe /* CLK */
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe /* CMD */
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe /* DATA0 */
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe /* DATA1 */
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe /* DATA2 */
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe /* DATA3 */
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_CLK */
+ IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e /* SDIO_CMD */
+ IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e /* SDIO_DATA0 */
+ IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e /* SDIO_DATA1 */
+ IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e /* SDIO_DATA2 */
+ IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e /* SDIO_DATA3 */
+ >;
+ };
+};
+
+&tpm3 { /* FPSC PWM1 */
+ pinctrl-0 = <&pinctrl_tpm3>;
+ pinctrl-names = "default";
+};
+
+&tpm5 { /* FPSC PWM2 */
+ pinctrl-0 = <&pinctrl_tpm5>;
+ pinctrl-names = "default";
+};
+
+&usb3 { /* FPSC USB1 */
+ pinctrl-0 = <&pinctrl_usbc>;
+ pinctrl-names = "default";
+};
+
+&usdhc1 {
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc1>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ status = "okay";
+};
+
+&usdhc2 { /* FPSC SDCARD */
+ bus-width = <4>;
+ disable-wp;
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc2>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ sd-uhs-sdr104;
+ vmmc-supply = <®_usdhc2_vmmc>;
+};
+
+&usdhc3 { /* FPSC SDIO */
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-names = "default";
+};
* Copyright 2024 NXP
*/
+#include <dt-bindings/clock/nxp,imx95-clock.h>
#include <dt-bindings/dma/fsl-edma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
};
i3c2: i3c@42520000 {
- compatible = "silvaco,i3c-master-v1";
+ compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
reg = <0x42520000 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <3>;
#size-cells = <0>;
clocks = <&scmi_clk IMX95_CLK_BUSAON>,
- <&scmi_clk IMX95_CLK_I3C2>,
<&scmi_clk IMX95_CLK_I3C2SLOW>;
- clock-names = "pclk", "fast_clk", "slow_clk";
+ clock-names = "pclk", "fast_clk";
status = "disabled";
};
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "gpio", "port";
gpio-ranges = <&scmi_iomuxc 0 4 32>;
+ ngpios = <32>;
};
gpio3: gpio@43820000 {
clock-names = "gpio", "port";
gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>,
<&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>;
+ ngpios = <32>;
};
gpio4: gpio@43840000 {
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "gpio", "port";
gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>;
+ ngpios = <30>;
};
gpio5: gpio@43850000 {
<&scmi_clk IMX95_CLK_BUSWAKEUP>;
clock-names = "gpio", "port";
gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>;
+ ngpios = <18>;
};
aips1: bus@44000000 {
};
i3c1: i3c@44330000 {
- compatible = "silvaco,i3c-master-v1";
+ compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1";
reg = <0x44330000 0x10000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <3>;
#size-cells = <0>;
clocks = <&scmi_clk IMX95_CLK_BUSAON>,
- <&scmi_clk IMX95_CLK_I3C1>,
<&scmi_clk IMX95_CLK_I3C1SLOW>;
- clock-names = "pclk", "fast_clk", "slow_clk";
+ clock-names = "pclk", "fast_clk";
status = "disabled";
};
<&scmi_clk IMX95_CLK_M33>;
clock-names = "gpio", "port";
gpio-ranges = <&scmi_iomuxc 0 112 16>;
+ ngpios = <16>;
status = "disabled";
};
status = "disabled";
};
+ vpu_blk_ctrl: clock-controller@4c410000 {
+ compatible = "nxp,imx95-vpu-csr", "syscon";
+ reg = <0x0 0x4c410000 0x0 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&scmi_clk IMX95_CLK_VPUAPB>;
+ power-domains = <&scmi_devpd IMX95_PD_VPU>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_VPUAPB>,
+ <&scmi_clk IMX95_CLK_VPU>,
+ <&scmi_clk IMX95_CLK_VPUJPEG>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+ <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+ assigned-clock-rates = <133333333>, <667000000>, <500000000>;
+ };
+
+ jpegdec: jpegdec@4c500000 {
+ compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec";
+ reg = <0x0 0x4C500000 0x0 0x00050000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_VPU>,
+ <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+ assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+ power-domains = <&scmi_devpd IMX95_PD_VPU>;
+ };
+
+ jpegenc: jpegenc@4c550000 {
+ compatible = "nxp,imx95-jpgenc", "nxp,imx8qxp-jpgenc";
+ reg = <0x0 0x4C550000 0x0 0x00050000>;
+ interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_VPU>,
+ <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+ assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
+ assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
+ power-domains = <&scmi_devpd IMX95_PD_VPU>;
+ };
+
netcmix_blk_ctrl: syscon@4c810000 {
compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon";
reg = <0x0 0x4c810000 0x0 0x8>;
<0x90 &its 0x65 0x1>, //ENETC2 VF0
<0xa0 &its 0x66 0x1>, //ENETC2 VF1
<0xc0 &its 0x67 0x1>; //NETC Timer
+ iommu-map = <0x0 &smmu 0x20 0x1>,
+ <0x10 &smmu 0x21 0x1>,
+ <0x20 &smmu 0x22 0x1>,
+ <0x40 &smmu 0x23 0x1>,
+ <0x80 &smmu 0x24 0x1>,
+ <0x90 &smmu 0x25 0x1>,
+ <0xa0 &smmu 0x26 0x1>,
+ <0xc0 &smmu 0x27 0x1>;
/* ENETC0~2 and Timer BAR0 - non-prefetchable memory */
ranges = <0x82000000 0x0 0x4cc00000 0x0 0x4cc00000 0x0 0xe0000
/* Timer BAR2 - prefetchable memory */
regulator-max-microvolt = <3300000>;
};
- sound {
+ sound: sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
model = "tqm-tlv320aic32";
ssi-controller = <&sai3>;
#size-cells = <1>;
ranges = <0 0 0 0x80000000>;
+ rtc0: rtc@40060000 {
+ compatible = "nxp,s32g2-rtc";
+ reg = <0x40060000 0x1000>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 54>, <&clks 55>;
+ clock-names = "ipg", "source0";
+ };
+
pinctrl: pinctrl@4009c240 {
compatible = "nxp,s32g2-siul2-pinctrl";
/* MSCR0-MSCR101 registers on siul2_0 */
status = "disabled";
};
+ usbmisc: usbmisc@44064200 {
+ #index-cells = <1>;
+ compatible = "nxp,s32g2-usbmisc";
+ reg = <0x44064200 0x200>;
+ };
+
+ usbotg: usb@44064000 {
+ compatible = "nxp,s32g2-usb";
+ reg = <0x44064000 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+ clocks = <&clks 94>, <&clks 95>;
+ fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x3>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ phy_type = "ulpi";
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ status = "disabled";
+ };
+
+ spi0: spi@401d4000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x401d4000 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <8>;
+ bus-num = <0>;
+ dmas = <&edma0 0 7>, <&edma0 0 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi1: spi@401d8000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x401d8000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <1>;
+ dmas = <&edma0 0 10>, <&edma0 0 11>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi2: spi@401dc000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x401dc000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <2>;
+ dmas = <&edma0 0 13>, <&edma0 0 14>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
i2c0: i2c@401e4000 {
compatible = "nxp,s32g2-i2c";
reg = <0x401e4000 0x1000>;
status = "disabled";
};
+ spi3: spi@402c8000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x402c8000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <3>;
+ dmas = <&edma0 1 7>, <&edma0 1 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi4: spi@402cc000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x402cc000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <4>;
+ dmas = <&edma0 1 10>, <&edma0 1 11>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi5: spi@402d0000 {
+ compatible = "nxp,s32g2-dspi";
+ reg = <0x402d0000 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <5>;
+ dmas = <&edma0 1 13>, <&edma0 1 14>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
i2c3: i2c@402d8000 {
compatible = "nxp,s32g2-i2c";
reg = <0x402d8000 0x1000>;
#size-cells = <1>;
ranges = <0 0 0 0x80000000>;
+ rtc0: rtc@40060000 {
+ compatible = "nxp,s32g3-rtc",
+ "nxp,s32g2-rtc";
+ reg = <0x40060000 0x1000>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 54>, <&clks 55>;
+ clock-names = "ipg", "source0";
+ };
+
pinctrl: pinctrl@4009c240 {
compatible = "nxp,s32g2-siul2-pinctrl";
/* MSCR0-MSCR101 registers on siul2_0 */
status = "disabled";
};
+ usbmisc: usbmisc@44064200 {
+ #index-cells = <1>;
+ compatible = "nxp,s32g3-usbmisc";
+ reg = <0x44064200 0x200>;
+ };
+
+ usbotg: usb@44064000 {
+ compatible = "nxp,s32g3-usb", "nxp,s32g2-usb";
+ reg = <0x44064000 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, /* OTG Core */
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; /* OTG Wakeup */
+ clocks = <&clks 94>, <&clks 95>;
+ fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x3>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ phy_type = "ulpi";
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ status = "disabled";
+ };
+
+ spi0: spi@401d4000 {
+ compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+ reg = <0x401d4000 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <8>;
+ bus-num = <0>;
+ dmas = <&edma0 0 7>, <&edma0 0 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi1: spi@401d8000 {
+ compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+ reg = <0x401d8000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <1>;
+ dmas = <&edma0 0 10>, <&edma0 0 11>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi2: spi@401dc000 {
+ compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+ reg = <0x401dc000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <2>;
+ dmas = <&edma0 0 13>, <&edma0 0 14>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
i2c0: i2c@401e4000 {
compatible = "nxp,s32g3-i2c",
"nxp,s32g2-i2c";
status = "disabled";
};
+ spi3: spi@402c8000 {
+ compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+ reg = <0x402c8000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <3>;
+ dmas = <&edma0 1 7>, <&edma0 1 8>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi4: spi@402cc000 {
+ compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+ reg = <0x402cc000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <4>;
+ dmas = <&edma0 1 10>, <&edma0 1 11>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi5: spi@402d0000 {
+ compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
+ reg = <0x402d0000 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 26>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ bus-num = <5>;
+ dmas = <&edma0 1 13>, <&edma0 1 14>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
i2c3: i2c@402d8000 {
compatible = "nxp,s32g3-i2c",
"nxp,s32g2-i2c";
pinmux = <0x2d40>, <0x2d30>;
};
};
+
+ dspi1_pins: dspi1-pins {
+ dspi1-grp0 {
+ pinmux = <0x72>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+
+ dspi1-grp1 {
+ pinmux = <0x62>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ dspi1-grp2 {
+ pinmux = <0x83>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ dspi1-grp3 {
+ pinmux = <0x5F0>;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+
+ dspi1-grp4 {
+ pinmux = <0x3D92>,
+ <0x3DA2>,
+ <0x3DB2>;
+ };
+ };
+
+ dspi5_pins: dspi5-pins {
+ dspi5-grp0 {
+ pinmux = <0x93>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ dspi5-grp1 {
+ pinmux = <0xA0>;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+
+ dspi5-grp2 {
+ pinmux = <0x3ED2>,
+ <0x3EE2>,
+ <0x3EF2>;
+ };
+
+ dspi5-grp3 {
+ pinmux = <0xB3>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ dspi5-grp4 {
+ pinmux = <0xC3>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+ };
};
&can0 {
pinctrl-1 = <&i2c4_gpio_pins>;
status = "okay";
};
+
+&spi1 {
+ pinctrl-0 = <&dspi1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spi5 {
+ pinctrl-0 = <&dspi5_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
pinmux = <0x2d40>, <0x2d30>;
};
};
+
+ dspi1_pins: dspi1-pins {
+ dspi1-grp0 {
+ pinmux = <0x72>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+
+ dspi1-grp1 {
+ pinmux = <0x62>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ dspi1-grp2 {
+ pinmux = <0x83>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ dspi1-grp3 {
+ pinmux = <0x5F0>;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+
+ dspi1-grp4 {
+ pinmux = <0x3D92>,
+ <0x3DA2>,
+ <0x3DB2>;
+ };
+ };
+
+ dspi5_pins: dspi5-pins {
+ dspi5-grp0 {
+ pinmux = <0x93>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ dspi5-grp1 {
+ pinmux = <0xA0>;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+
+ dspi5-grp2 {
+ pinmux = <0x3ED2>,
+ <0x3EE2>,
+ <0x3EF2>;
+ };
+
+ dspi5-grp3 {
+ pinmux = <0xB3>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ dspi5-grp4 {
+ pinmux = <0xC3>;
+ output-enable;
+ input-enable;
+ slew-rate = <150>;
+ bias-pull-up;
+ };
+ };
};
&can0 {
};
};
+&spi1 {
+ pinctrl-0 = <&dspi1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spi5 {
+ pinctrl-0 = <&dspi5_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&i2c2_pins>;
#include <dt-bindings/net/ti-dp83867.h>
/ {
- sfp1: sfp1 {
- compatible = "sff,sfp";
- i2c-bus = <&sfp1_i2c>;
- mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
- los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
- tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
- };
- sfp2: sfp2 {
- compatible = "sff,sfp";
- i2c-bus = <&sfp2_i2c>;
- mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
- los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
- tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
- };
};
&dpmac1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ sfp1: sfp1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp1_i2c>;
+ mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ sfp2: sfp2 {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp2_i2c>;
+ mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
};
&duart0 {
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
+ vdd-supply = <®_3v3>;
i2c@0 {
reg = <0x0>;
*/
/ {
+ reg_vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
f2s_free_clk: f2s-free-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-frequency = <100000000>;
};
osc1: osc1 {
* Copyright (C) 2016, LG Electronics
*/
-#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
- #address-cells = <2>;
- #size-cells = <2>;
+#include "lg131x.dtsi"
+/ {
compatible = "lge,lg1312";
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- };
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- };
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- };
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- };
- L2_0: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2", "arm,psci";
- method = "smc";
- cpu_suspend = <0x84000001>;
- cpu_off = <0x84000002>;
- cpu_on = <0x84000003>;
- };
-
- gic: interrupt-controller@c0001000 {
- #interrupt-cells = <3>;
- compatible = "arm,gic-400";
- interrupt-controller;
- reg = <0x0 0xc0001000 0x1000>,
- <0x0 0xc0002000 0x2000>,
- <0x0 0xc0004000 0x2000>,
- <0x0 0xc0006000 0x2000>;
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>,
- <&cpu1>,
- <&cpu2>,
- <&cpu3>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>;
- };
-
- clk_bus: clk_bus {
- #clock-cells = <0>;
-
- compatible = "fixed-clock";
- clock-frequency = <198000000>;
- clock-output-names = "BUSCLK";
- };
soc {
#address-cells = <2>;
mac-address = [ 00 00 00 00 00 00 ];
};
};
-
- amba {
- #address-cells = <2>;
- #size-cells = <1>;
-
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- timers: timer@fd100000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x0 0xfd100000 0x1000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
- clock-names = "timer0clk", "timer1clk", "apb_pclk";
- };
- wdog: watchdog@fd200000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0 0xfd200000 0x1000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>;
- clock-names = "wdog_clk", "apb_pclk";
- };
- uart0: serial@fe000000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0xfe000000 0x1000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- uart1: serial@fe100000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0xfe100000 0x1000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- uart2: serial@fe200000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0xfe200000 0x1000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- spi0: spi@fe800000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0x0 0xfe800000 0x1000>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>;
- clock-names = "sspclk", "apb_pclk";
- };
- spi1: spi@fe900000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0x0 0xfe900000 0x1000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>;
- clock-names = "sspclk", "apb_pclk";
- };
- dmac0: dma-controller@c1128000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xc1128000 0x1000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
- gpio0: gpio@fd400000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd400000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio1: gpio@fd410000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd410000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio2: gpio@fd420000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd420000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio3: gpio@fd430000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd430000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- };
- gpio4: gpio@fd440000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd440000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio5: gpio@fd450000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd450000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio6: gpio@fd460000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd460000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio7: gpio@fd470000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd470000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio8: gpio@fd480000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd480000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio9: gpio@fd490000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd490000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio10: gpio@fd4a0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4a0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio11: gpio@fd4b0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4b0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- };
- gpio12: gpio@fd4c0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4c0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio13: gpio@fd4d0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4d0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio14: gpio@fd4e0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4e0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio15: gpio@fd4f0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4f0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio16: gpio@fd500000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd500000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio17: gpio@fd510000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd510000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- };
- };
};
* Copyright (C) 2016, LG Electronics
*/
-#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
- #address-cells = <2>;
- #size-cells = <2>;
+#include "lg131x.dtsi"
+/ {
compatible = "lge,lg1313";
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- };
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- };
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- };
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- };
- L2_0: l2-cache0 {
- compatible = "cache";
- cache-level = <2>;
- cache-unified;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2", "arm,psci";
- method = "smc";
- cpu_suspend = <0x84000001>;
- cpu_off = <0x84000002>;
- cpu_on = <0x84000003>;
- };
-
- gic: interrupt-controller@c0001000 {
- #interrupt-cells = <3>;
- compatible = "arm,gic-400";
- interrupt-controller;
- reg = <0x0 0xc0001000 0x1000>,
- <0x0 0xc0002000 0x2000>,
- <0x0 0xc0004000 0x2000>,
- <0x0 0xc0006000 0x2000>;
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>,
- <&cpu1>,
- <&cpu2>,
- <&cpu3>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
- IRQ_TYPE_LEVEL_LOW)>;
- };
-
- clk_bus: clk_bus {
- #clock-cells = <0>;
-
- compatible = "fixed-clock";
- clock-frequency = <198000000>;
- clock-output-names = "BUSCLK";
- };
soc {
#address-cells = <2>;
mac-address = [ 00 00 00 00 00 00 ];
};
};
-
- amba {
- #address-cells = <2>;
- #size-cells = <1>;
-
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- timers: timer@fd100000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x0 0xfd100000 0x1000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
- clock-names = "timer0clk", "timer1clk", "apb_pclk";
- };
- wdog: watchdog@fd200000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0 0xfd200000 0x1000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>;
- clock-names = "wdog_clk", "apb_pclk";
- };
- uart0: serial@fe000000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0xfe000000 0x1000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- uart1: serial@fe100000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0xfe100000 0x1000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- uart2: serial@fe200000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0xfe200000 0x1000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- spi0: spi@fe800000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0x0 0xfe800000 0x1000>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>;
- clock-names = "sspclk", "apb_pclk";
- };
- spi1: spi@fe900000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0x0 0xfe900000 0x1000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>, <&clk_bus>;
- clock-names = "sspclk", "apb_pclk";
- };
- dmac0: dma-controller@c1128000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xc1128000 0x1000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
- gpio0: gpio@fd400000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd400000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio1: gpio@fd410000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd410000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio2: gpio@fd420000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd420000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio3: gpio@fd430000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd430000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- };
- gpio4: gpio@fd440000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd440000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio5: gpio@fd450000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd450000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio6: gpio@fd460000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd460000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio7: gpio@fd470000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd470000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio8: gpio@fd480000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd480000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio9: gpio@fd490000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd490000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio10: gpio@fd4a0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4a0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio11: gpio@fd4b0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4b0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- };
- gpio12: gpio@fd4c0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4c0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio13: gpio@fd4d0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4d0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio14: gpio@fd4e0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4e0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio15: gpio@fd4f0000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd4f0000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio16: gpio@fd500000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd500000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
- gpio17: gpio@fd510000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0x0 0xfd510000 0x1000>;
- clocks = <&clk_bus>;
- clock-names = "apb_pclk";
- };
- };
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg131x SoCs
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ next-level-cache = <&L2_0>;
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2", "arm,psci";
+ method = "smc";
+ cpu_suspend = <0x84000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ gic: interrupt-controller@c0001000 {
+ #interrupt-cells = <3>;
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ reg = <0x0 0xc0001000 0x1000>,
+ <0x0 0xc0002000 0x2000>,
+ <0x0 0xc0004000 0x2000>,
+ <0x0 0xc0006000 0x2000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ clk_bus: clk_bus {
+ #clock-cells = <0>;
+
+ compatible = "fixed-clock";
+ clock-frequency = <198000000>;
+ clock-output-names = "BUSCLK";
+ };
+
+ amba {
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ timers: timer@fd100000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x0 0xfd100000 0x1000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+ clock-names = "timer0clk", "timer1clk", "apb_pclk";
+ };
+ wdog: watchdog@fd200000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xfd200000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+ uart0: serial@fe000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfe000000 0x1000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ uart1: serial@fe100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfe100000 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ uart2: serial@fe200000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfe200000 0x1000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ spi0: spi@fe800000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xfe800000 0x1000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "sspclk", "apb_pclk";
+ };
+ spi1: spi@fe900000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xfe900000 0x1000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>, <&clk_bus>;
+ clock-names = "sspclk", "apb_pclk";
+ };
+ dmac0: dma-controller@c1128000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xc1128000 0x1000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+ gpio0: gpio@fd400000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd400000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio1: gpio@fd410000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd410000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio2: gpio@fd420000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd420000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio3: gpio@fd430000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd430000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ gpio4: gpio@fd440000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd440000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio5: gpio@fd450000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd450000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio6: gpio@fd460000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd460000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio7: gpio@fd470000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd470000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio8: gpio@fd480000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd480000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio9: gpio@fd490000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd490000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio10: gpio@fd4a0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4a0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio11: gpio@fd4b0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4b0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ gpio12: gpio@fd4c0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4c0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio13: gpio@fd4d0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4d0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio14: gpio@fd4e0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4e0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio15: gpio@fd4f0000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd4f0000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio16: gpio@fd500000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd500000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ gpio17: gpio@fd510000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x0 0xfd510000 0x1000>;
+ clocks = <&clk_bus>;
+ clock-names = "apb_pclk";
+ };
+ };
+};
/* CPS Lane 1 - U32 */
sata-port@0 {
phys = <&cp1_comphy1 0>;
+ status = "okay";
};
/* CPS Lane 3 - U31 */
sata-port@1 {
phys = <&cp1_comphy3 1>;
+ status = "okay";
};
};
/* SRDS #0 - SATA on M.2 connector */
&cp0_sata0 {
- phys = <&cp0_comphy0 1>;
status = "okay";
- /* only port 1 is available */
- /delete-node/ sata-port@0;
+ sata-port@1 {
+ phys = <&cp0_comphy0 1>;
+ status = "okay";
+ };
};
/* microSD */
/* SRDS #1 - SATA on M.2 (J44) */
&cp1_sata0 {
- phys = <&cp1_comphy1 0>;
status = "okay";
/* only port 0 is available */
- /delete-node/ sata-port@1;
+ sata-port@0 {
+ phys = <&cp1_comphy1 0>;
+ status = "okay";
+ };
};
&cp1_syscon0 {
/* SRDS #0,#1,#2,#3 - PCIe */
&cp0_pcie0 {
num-lanes = <4>;
- phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+ /*
+ * The mvebu-comphy driver does not currently know how to pass correct
+ * lane-count to ATF while configuring the serdes lanes.
+ * Rely on bootloader configuration only.
+ *
+ * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+ */
status = "okay";
};
/* SRDS #0,#1 - PCIe */
&cp1_pcie0 {
num-lanes = <2>;
- phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+ /*
+ * The mvebu-comphy driver does not currently know how to pass correct
+ * lane-count to ATF while configuring the serdes lanes.
+ * Rely on bootloader configuration only.
+ *
+ * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+ */
status = "okay";
};
status = "okay";
/* only port 1 is available */
- /delete-node/ sata-port@0;
-
sata-port@1 {
phys = <&cp1_comphy3 1>;
+ status = "okay";
};
};
status = "okay";
/* only port 1 is available */
- /delete-node/ sata-port@0;
-
sata-port@1 {
+ status = "okay";
phys = <&cp2_comphy3 1>;
};
};
pinctrl-0 = <&ap_mmc0_pins>;
pinctrl-names = "default";
vqmmc-supply = <&v_1_8>;
+ /*
+ * Not stable in HS modes - phy needs "more calibration", so disable
+ * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes.
+ */
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ model = "Samsung Galaxy Core Prime VE LTE";
+ compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+ aliases {
+ mmc0 = &sdh2; /* eMMC */
+ mmc1 = &sdh0; /* SD card */
+ serial0 = &uart0;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0:115200n8";
+
+ fb0: framebuffer@17177000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x17177000 0 (480 * 800 * 4)>;
+ width = <480>;
+ height = <800>;
+ stride = <(480 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ /* Bootloader fills this in */
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer@17000000 {
+ reg = <0 0x17000000 0 0x1800000>;
+ no-map;
+ };
+
+ gpu@9000000 {
+ reg = <0 0x9000000 0 0x1000000>;
+ };
+
+ /* Communications processor, aka modem */
+ cp@5000000 {
+ reg = <0 0x5000000 0 0x3000000>;
+ };
+
+ cm3@a000000 {
+ reg = <0 0xa000000 0 0x80000>;
+ };
+
+ seclog@8000000 {
+ reg = <0 0x8000000 0 0x100000>;
+ };
+
+ ramoops@8100000 {
+ compatible = "ramoops";
+ reg = <0 0x8100000 0 0x40000>;
+ record-size = <0x8000>;
+ console-size = <0x20000>;
+ max-reason = <5>;
+ };
+ };
+
+ i2c-muic {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <3>;
+ i2c-gpio,timeout-ms = <100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_muic_pins>;
+
+ muic: extcon@14 {
+ compatible = "siliconmitus,sm5504-muic";
+ reg = <0x14>;
+ interrupt-parent = <&gpio>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+ autorepeat;
+
+ key-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+ };
+
+ key-volup {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ key-voldown {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&smmu {
+ status = "okay";
+};
+
+&pmx {
+ pinctrl-single,gpio-range = <&range 55 55 0>,
+ <&range 110 32 0>,
+ <&range 52 1 0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>;
+
+ board_pins_0: board-pins-0 {
+ pinctrl-single,pins = <
+ 0x160 0
+ 0x164 0
+ 0x168 0
+ 0x16c 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0x288 0x388>;
+ };
+
+ board_pins_1: board-pins-1 {
+ pinctrl-single,pins = <
+ 0x44 1
+ 0x48 1
+ 0x20 1
+ 0x18 1
+ 0x14 1
+ 0x10 1
+ 0xc 1
+ 0x8 1
+ 0x68 1
+ 0x58 0
+ 0x54 0
+ 0x7c 0
+ 0x6c 0
+ 0x70 0
+ 0x4c 1
+ 0x50 1
+ 0xac 0
+ 0x90 0
+ 0x8c 0
+ 0x88 0
+ 0x84 0
+ 0xc8 0
+ 0x128 0
+ 0x190 0
+ 0x194 0
+ 0x1a0 0
+ 0x114 0
+ 0x118 0
+ 0x1d8 0
+ 0x1e4 0
+ 0xe8 0
+ 0x100 0
+ 0x204 0
+ 0x210 0
+ 0x218 0
+ >;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+ pinctrl-single,low-power-mode = <0x288 0x388>;
+ };
+
+ board_pins_2: board-pins-2 {
+ pinctrl-single,pins = <
+ 0x260 0
+ 0x264 0
+ 0x268 0
+ 0x26c 0
+ 0x270 0
+ 0x274 0
+ 0x78 0
+ 0x74 0
+ 0xb0 1
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ 0x198 6
+ 0x19c 6
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ gpio_keys_pins: gpio-keys-pins {
+ pinctrl-single,pins = <
+ 0x11c 0
+ 0x120 0
+ 0x1a4 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ i2c_muic_pins: i2c-muic-pins {
+ pinctrl-single,pins = <
+ 0x154 0
+ 0x150 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0x288 0x388>;
+ };
+
+ sdh0_pins_0: sdh0-pins-0 {
+ pinctrl-single,pins = <
+ 0x108 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ sdh0_pins_1: sdh0-pins-1 {
+ pinctrl-single,pins = <
+ 0x94 0
+ 0x98 0
+ 0x9c 0
+ 0xa0 0
+ 0xa4 0
+ >;
+ pinctrl-single,drive-strength = <0x800 0x1800>;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ sdh0_pins_2: sdh0-pins-2 {
+ pinctrl-single,pins = <
+ 0xa8 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0 0x30>;
+ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+ pinctrl-single,low-power-mode = <0x208 0x388>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+ status = "okay";
+};
+
+&twsi1 {
+ status = "okay";
+};
+
+&twsi2 {
+ status = "okay";
+};
+
+&twsi3 {
+ status = "okay";
+};
+
+&usb {
+ extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+ /* Disabled for now because initialization fails with -ETIMEDOUT. */
+ status = "disabled";
+ bus-width = <8>;
+ non-removable;
+ mmc-ddr-1_8v;
+};
+
+&sdh0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>;
+ cd-gpios = <&gpio 11 0>;
+ cd-inverted;
+ bus-width = <4>;
+ wp-inverted;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+ model = "Marvell Armada PXA1908";
+ compatible = "marvell,pxa1908";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 3>;
+ enable-method = "psci";
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ smmu: iommu@c0010000 {
+ compatible = "arm,mmu-400";
+ reg = <0 0xc0010000 0 0x10000>;
+ #global-interrupts = <1>;
+ #iommu-cells = <1>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@d1df9000 {
+ compatible = "arm,gic-400";
+ reg = <0 0xd1df9000 0 0x1000>,
+ <0 0xd1dfa000 0 0x2000>,
+ /* The subsequent registers are guesses. */
+ <0 0xd1dfc000 0 0x2000>,
+ <0 0xd1dfe000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ apb@d4000000 {
+ compatible = "simple-bus";
+ reg = <0 0xd4000000 0 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xd4000000 0x200000>;
+
+ pdma: dma-controller@0 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0 0x10000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <30>;
+ #dma-cells = <2>;
+ };
+
+ twsi1: i2c@10800 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10800 0x64>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_TWSI1>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi0: i2c@11000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11000 0x64>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_TWSI0>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi3: i2c@13800 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x13800 0x64>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_TWSI3>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ apbc: clock-controller@15000 {
+ compatible = "marvell,pxa1908-apbc";
+ reg = <0x15000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@17000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+ reg = <0x17000 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_UART0>;
+ reg-shift = <2>;
+ };
+
+ uart1: serial@18000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+ reg = <0x18000 0x1000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_UART1>;
+ reg-shift = <2>;
+ };
+
+ gpio: gpio@19000 {
+ compatible = "marvell,mmp-gpio";
+ reg = <0x19000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&apbc PXA1908_CLK_GPIO>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges = <0 0x19000 0x800>;
+
+ gpio@0 {
+ reg = <0x0 0x4>;
+ };
+
+ gpio@4 {
+ reg = <0x4 0x4>;
+ };
+
+ gpio@8 {
+ reg = <0x8 0x4>;
+ };
+
+ gpio@100 {
+ reg = <0x100 0x4>;
+ };
+ };
+
+ pmx: pinmux@1e000 {
+ compatible = "marvell,pxa1908-padconf", "pinconf-single";
+ reg = <0x1e000 0x330>;
+
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ uart2: serial@36000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+ reg = <0x36000 0x1000>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbcp PXA1908_CLK_UART2>;
+ reg-shift = <2>;
+ };
+
+ twsi2: i2c@37000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x37000 0x64>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbcp PXA1908_CLK_TWSI2>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ apbcp: clock-controller@3b000 {
+ compatible = "marvell,pxa1908-apbcp";
+ reg = <0x3b000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mpmu: clock-controller@50000 {
+ compatible = "marvell,pxa1908-mpmu";
+ reg = <0x50000 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ axi@d4200000 {
+ compatible = "simple-bus";
+ reg = <0 0xd4200000 0 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xd4200000 0x200000>;
+
+ usbphy: phy@7000 {
+ compatible = "marvell,pxa1928-usb-phy";
+ reg = <0x7000 0x200>;
+ clocks = <&apmu PXA1908_CLK_USB>;
+ #phy-cells = <0>;
+ };
+
+ usb: usb@8000 {
+ compatible = "chipidea,usb2";
+ reg = <0x8000 0x200>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_USB>;
+ phys = <&usbphy>;
+ phy-names = "usb-phy";
+ };
+
+ sdh0: mmc@80000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0x80000 0x120>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_SDH0>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <31>;
+ };
+
+ sdh1: mmc@80800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0x80800 0x120>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_SDH1>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <31>;
+ };
+
+ sdh2: mmc@81000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0x81000 0x120>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_SDH2>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <31>;
+ };
+
+ apmu: clock-controller@82800 {
+ compatible = "marvell,pxa1908-apmu";
+ reg = <0x82800 0x400>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+};
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
#include "mt7988a.dtsi"
status = "okay";
};
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_green: led-green {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 79 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_blue: led-blue {
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
};
};
+&cci {
+ proc-supply = <&rt5190_buck3>;
+};
+
&cpu0 {
proc-supply = <&rt5190_buck3>;
};
};
&pio {
- mdio0_pins: mdio0-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio0";
- };
-
- conf {
- pins = "SMI_0_MDC", "SMI_0_MDIO";
- drive-strength = <8>;
- };
- };
-
i2c0_pins: i2c0-g0-pins {
mux {
function = "i2c";
};
};
- i2c1_sfp_pins: i2c1-sfp-g0-pins {
- mux {
- function = "i2c";
- groups = "i2c1_sfp";
- };
- };
-
- i2c2_0_pins: i2c2-g0-pins {
- mux {
- function = "i2c";
- groups = "i2c2_0";
- };
- };
-
i2c2_1_pins: i2c2-g1-pins {
mux {
function = "i2c";
};
};
- gbe0_led1_pins: gbe0-led1-pins {
- mux {
- function = "led";
- groups = "gbe0_led1";
- };
- };
-
- gbe1_led1_pins: gbe1-led1-pins {
- mux {
- function = "led";
- groups = "gbe1_led1";
- };
- };
-
- gbe2_led1_pins: gbe2-led1-pins {
- mux {
- function = "led";
- groups = "gbe2_led1";
- };
- };
-
- gbe3_led1_pins: gbe3-led1-pins {
- mux {
- function = "led";
- groups = "gbe3_led1";
- };
- };
-
i2p5gbe_led0_pins: 2p5gbe-led0-pins {
mux {
function = "led";
};
};
- i2p5gbe_led1_pins: 2p5gbe-led1-pins {
- mux {
- function = "led";
- groups = "2p5gbe_led1";
- };
- };
-
mmc0_pins_emmc_45: mmc0-emmc-45-pins {
mux {
function = "flash";
};
};
- snfi_pins: snfi-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spi0_pins: spi0-pins {
- mux {
- function = "spi";
- groups = "spi0";
- };
- };
-
spi0_flash_pins: spi0-flash-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
};
-
- spi2_pins: spi2-pins {
- mux {
- function = "spi";
- groups = "spi2";
- };
- };
-
- spi2_flash_pins: spi2-flash-pins {
- mux {
- function = "spi";
- groups = "spi2", "spi2_wp_hold";
- };
- };
};
&pwm {
#address-cells = <2>;
#size-cells = <2>;
+ cci: cci {
+ compatible = "mediatek,mt7988-cci", "mediatek,mt8183-cci";
+ clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>,
+ <&topckgen CLK_TOP_XTAL>;
+ clock-names = "cci", "intermediate";
+ operating-points-v2 = <&cci_opp>;
+ };
+
+ cci_opp: opp-table-cci {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <850000>;
+ };
+ opp-660000000 {
+ opp-hz = /bits/ 64 <660000000>;
+ opp-microvolt = <850000>;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <850000>;
+ };
+ opp-1080000000 {
+ opp-hz = /bits/ 64 <1080000000>;
+ opp-microvolt = <900000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cluster0_opp>;
+ mediatek,cci = <&cci>;
};
cpu1: cpu@1 {
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cluster0_opp>;
+ mediatek,cci = <&cci>;
};
cpu2: cpu@2 {
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cluster0_opp>;
+ mediatek,cci = <&cci>;
};
cpu3: cpu@3 {
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cluster0_opp>;
+ mediatek,cci = <&cci>;
};
cluster0_opp: opp-table-0 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+
+ afe_dma_mem: audio-dma-pool {
+ compatible = "shared-dma-pool";
+ size = <0 0x100000>;
+ alignment = <0 0x10>;
+ no-map;
+ };
+
vpu_dma_reserved: vpu-dma-mem@b7000000 {
compatible = "shared-dma-pool";
reg = <0 0xb7000000 0 0x500000>;
<&topckgen CLK_TOP_AUD_2_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_APLL1>,
<&topckgen CLK_TOP_APLL2>;
+ memory-region = <&afe_dma_mem>;
};
mmc0: mmc@11230000 {
#size-cells = <2>;
ranges;
+ afe_dma_mem: audio-dma-pool {
+ compatible = "shared-dma-pool";
+ size = <0 0x100000>;
+ alignment = <0 0x10>;
+ no-map;
+ };
+
scp_mem_reserved: memory@50000000 {
compatible = "shared-dma-pool";
reg = <0 0x50000000 0 0x2900000>;
};
};
+&afe {
+ memory-region = <&afe_dma_mem>;
+};
+
&auxadc {
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-voltorb.dtsi"
+
+/ {
+ model = "Google squirtle board";
+ compatible = "google,squirtle", "mediatek,mt8186";
+ chassis-type = "convertible";
+};
+
+&i2c1 {
+ touchscreen@10 {
+ compatible = "elan,ekth6915";
+ reg = <0x10>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&pp3300_s3>;
+ status = "fail-needs-probe";
+ };
+
+ touchscreen@16 {
+ compatible = "elan,ekth8d18", "elan,ekth6a12nay";
+ reg = <0x16>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&pp3300_s3>;
+ status = "fail-needs-probe";
+ };
+};
+
+&i2c2 {
+ trackpad@68 {
+ compatible = "hid-over-i2c";
+ reg = <0x68>;
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pin>;
+ vdd-supply = <&pp3300_s3>;
+ wakeup-source;
+ status = "fail-needs-probe";
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ /delete-node/ codec@1a;
+
+ rt5650: codec@1a {
+ compatible = "realtek,rt5650";
+ reg = <0x1a>;
+ interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+ avdd-supply = <&mt6366_vio18_reg>;
+ cpvdd-supply = <&mt6366_vio18_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&speaker_codec_pins_default>;
+ cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ realtek,dmic1-data-pin = <2>;
+ realtek,jd-mode = <2>;
+ };
+};
+
+&sound {
+ compatible = "mediatek,mt8186-mt6366-rt5650-sound";
+ model = "mt8186_rt5650";
+
+ audio-routing =
+ "Headphone", "HPOL",
+ "Headphone", "HPOR",
+ "HDMI1", "TX";
+
+ hs-playback-dai-link {
+ codec {
+ sound-dai = <&rt5650>;
+ };
+ };
+
+ hs-capture-dai-link {
+ codec {
+ sound-dai = <&rt5650>;
+ };
+ };
+
+ spk-hdmi-playback-dai-link {
+ codec {
+ sound-dai = <&it6505dptx>;
+ };
+ };
+};
+
+&speaker_codec {
+ status = "disabled";
+};
+
+&trackpad_steelix {
+ status = "disabled";
+};
i2c-scl-internal-delay-ns = <22000>;
/* second source component */
- trackpad@2c {
+ trackpad_steelix: trackpad@2c {
compatible = "hid-over-i2c";
reg = <0x2c>;
hid-descr-addr = <0x20>;
interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pin>;
vdd-supply = <&pp3300_s3>;
wakeup-source;
+ status = "fail-needs-probe";
};
};
};
};
};
+
+&trackpad {
+ status = "fail-needs-probe";
+};
compatible = "hid-over-i2c";
reg = <0x15>;
interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pin>;
hid-descr-addr = <0x0001>;
vdd-supply = <&pp3300_s3>;
wakeup-source;
compatible = "hid-over-i2c";
reg = <0x15>;
interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pin>;
hid-descr-addr = <0x0001>;
vdd-supply = <&pp3300_s3>;
wakeup-source;
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2022 Google LLC
- */
-
-/dts-v1/;
-#include "mt8186-corsola-voltorb.dtsi"
-
-/ {
- model = "Google Voltorb sku589824 board";
- compatible = "google,voltorb-sku589824", "google,voltorb",
- "mediatek,mt8186";
-};
#include "mt8186-corsola-voltorb.dtsi"
/ {
- model = "Google Voltorb sku589825 board";
- compatible = "google,voltorb-sku589825", "google,voltorb",
- "mediatek,mt8186";
+ model = "Google Voltorb board";
+ compatible = "google,voltorb", "mediatek,mt8186";
};
&i2c1 {
#size-cells = <2>;
ranges;
+ afe_dma_mem: audio-dma-pool {
+ compatible = "shared-dma-pool";
+ size = <0 0x100000>;
+ alignment = <0 0x10>;
+ no-map;
+ };
+
adsp_dma_mem: memory@61000000 {
compatible = "shared-dma-pool";
reg = <0 0x61000000 0 0x100000>;
};
&afe {
+ memory-region = <&afe_dma_mem>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
- /*
- * Trackpad pin put here to work around second source components
- * sharing the pinmux in steelix designs.
- */
- pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
i2c-scl-internal-delay-ns = <10000>;
status = "okay";
- trackpad@15 {
+ trackpad: trackpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pin>;
vcc-supply = <&pp3300_s3>;
wakeup-source;
};
trackpad@2c {
compatible = "hid-over-i2c";
reg = <0x2c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
hid-descr-addr = <0x20>;
interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
+ status = "fail-needs-probe";
};
};
+
+&trackpad {
+ status = "fail-needs-probe";
+};
#size-cells = <2>;
ranges;
+ afe_dma_mem: audio-dma-pool {
+ compatible = "shared-dma-pool";
+ size = <0 0x100000>;
+ alignment = <0 0x10>;
+ no-map;
+ };
+
scp_mem_reserved: scp@50000000 {
compatible = "shared-dma-pool";
reg = <0 0x50000000 0 0x2900000>;
};
};
+&afe {
+ memory-region = <&afe_dma_mem>;
+};
+
&dsi0 {
status = "okay";
};
clock-frequency = <400000>;
clock-stretch-ns = <12600>;
pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>, <&trackpad_pins>;
+ pinctrl-0 = <&i2c2_pins>;
- trackpad@15 {
+ trackpad: trackpad@15 {
compatible = "elan,ekth3000";
reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
vcc-supply = <&pp3300_u>;
wakeup-source;
status = "disabled";
};
+ ufshci: ufshci@11270000 {
+ compatible = "mediatek,mt8195-ufshci";
+ reg = <0 0x11270000 0 0x2300>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&ufsphy>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_AES_UFSFDE>,
+ <&infracfg_ao CLK_INFRA_AO_AES>,
+ <&infracfg_ao CLK_INFRA_AO_UFS_TICK>,
+ <&infracfg_ao CLK_INFRA_AO_UNIPRO_SYS>,
+ <&infracfg_ao CLK_INFRA_AO_UNIPRO_TICK>,
+ <&infracfg_ao CLK_INFRA_AO_UFS_MP_SAP_B>,
+ <&infracfg_ao CLK_INFRA_AO_UFS_TX_SYMBOL>,
+ <&infracfg_ao CLK_INFRA_AO_PERI_UFS_MEM_SUB>;
+ clock-names = "ufs", "ufs_aes", "ufs_tick",
+ "unipro_sysclk", "unipro_tick",
+ "unipro_mp_bclk", "ufs_tx_symbol",
+ "ufs_mem_sub";
+ freq-table-hz = <0 0>, <0 0>, <0 0>,
+ <0 0>, <0 0>, <0 0>,
+ <0 0>, <0 0>;
+
+ mediatek,ufs-disable-mcq;
+ status = "disabled";
+ };
+
lvts_mcu: thermal-sensor@11278000 {
compatible = "mediatek,mt8195-lvts-mcu";
reg = <0 0x11278000 0 0x1000>;
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+/*
+ * Please note that overriding compatibles is a discouraged practice and is a
+ * clear indication of nodes not being, well, compatible!
+ *
+ * This is a special case, where the GPU is the same as MT8188, but with one
+ * of the cores fused out in this lower-binned SoC.
+ */
+&gpu {
+ compatible = "mediatek,mt8370-mali", "arm,mali-valhall-jm";
+
+ power-domains = <&spm MT8188_POWER_DOMAIN_MFG2>,
+ <&spm MT8188_POWER_DOMAIN_MFG3>;
+
+ power-domain-names = "core0", "core1";
+};
+
&ppi_cluster0 {
affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
};
linux,keycodes = <KEY_POWER>;
wakeup-source;
};
+
+ home {
+ linux,keycodes = <KEY_HOME>;
+ };
};
};
reg = <0 0x54600000 0x0 0x200000>;
};
- snd_dma_mem: memory@60000000 {
+ adsp_mem: memory@60000000 {
compatible = "shared-dma-pool";
- reg = <0 0x60000000 0 0x1100000>;
+ reg = <0 0x60000000 0 0xf00000>;
+ no-map;
+ };
+
+ afe_dma_mem: memory@60f00000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x60f00000 0 0x100000>;
+ no-map;
+ };
+
+ adsp_dma_mem: memory@61000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x61000000 0 0x100000>;
no-map;
};
};
};
+&adsp {
+ memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+ status = "okay";
+};
+
+&afe {
+ memory-region = <&afe_dma_mem>;
+ status = "okay";
+};
+
&disp_pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&disp_pwm0_pins>;
&pmic {
interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+ mt6359keys: keys {
+ compatible = "mediatek,mt6359-keys";
+ mediatek,long-press-mode = <1>;
+ power-off-time-sec = <0>;
+
+ power-key {
+ linux,keycodes = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ home {
+ linux,keycodes = <KEY_HOME>;
+ };
+ };
};
&scp {
status = "okay";
};
+&sound {
+ compatible = "mediatek,mt8195_mt6359";
+ model = "mt8395-evk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_default_pins>;
+ audio-routing =
+ "Headphone", "Headphone L",
+ "Headphone", "Headphone R";
+ mediatek,adsp = <&adsp>;
+ status = "okay";
+
+ headphone-dai-link {
+ link-name = "DL_SRC_BE";
+
+ codec {
+ sound-dai = <&pmic 0>;
+ };
+ };
+};
+
&spi1 {
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
#interrupt-cells = <3>;
interrupt-controller;
#address-cells = <0>;
- ppi-partitions {
- ppi_cluster0: interrupt-partition-0 {
- affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
- };
- };
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3834.dtsi"
+
+/ {
+ compatible = "nvidia,p3834-0008", "nvidia,tegra264";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264.dtsi"
+
+/ {
+ compatible = "nvidia,p3834", "nvidia,tegra264";
+
+ aliases {
+ };
+
+ bus@0 {
+ serial@c4e0000 {
+ status = "okay";
+ };
+
+ serial@c5a0000 {
+ status = "okay";
+ };
+ };
+
+ bus@8100000000 {
+ iommu@5000000 {
+ status = "okay";
+ };
+
+ iommu@6000000 {
+ status = "okay";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/dts-v1/;
+
+// module files must be included first
+#include "tegra264-p3834-0008.dtsi"
+#include "tegra264-p3971-0089+p3834.dtsi"
+
+/ {
+ model = "NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform";
+ compatible = "nvidia,p3971-0089+p3834-0008", "nvidia,p3834-0008", "nvidia,tegra264";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3971-0089.dtsi"
+
+/ {
+ aliases {
+ serial0 = &{/bus@0/serial@c4e0000};
+ serial1 = &{/bus@0/serial@c5a0000};
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include "tegra264-p3971.dtsi"
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+/ {
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+#include <dt-bindings/clock/nvidia,tegra264.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/nvidia,tegra264.h>
+#include <dt-bindings/reset/nvidia,tegra264.h>
+
+/ {
+ compatible = "nvidia,tegra264";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ shmem_bpmp: shmem@86070000 {
+ compatible = "nvidia,tegra264-bpmp-shmem";
+ reg = <0x0 0x86070000 0x0 0x2000>;
+ no-map;
+ };
+ };
+
+ /* SYSTEM MMIO */
+ bus@0 {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0x00 0x00000000 0x01 0x00000000>;
+
+ misc@100000 {
+ compatible = "nvidia,tegra234-misc";
+ reg = <0x0 0x00100000 0x0 0x0f000>,
+ <0x0 0x0c140000 0x0 0x10000>;
+ };
+
+ timer@8000000 {
+ compatible = "nvidia,tegra234-timer";
+ reg = <0x0 0x08000000 0x0 0x140000>;
+ interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gpcdma: dma-controller@8400000 {
+ compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma";
+ reg = <0x0 0x08400000 0x0 0x210000>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ iommus = <&smmu1 0x00000800>;
+ dma-coherent;
+ dma-channel-mask = <0xfffffffe>;
+ status = "disabled";
+ };
+
+ hsp_top: hsp@8800000 {
+ compatible = "nvidia,tegra264-hsp";
+ reg = <0x0 0x08800000 0x0 0xd0000>;
+ interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 624 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 626 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+ "shared3", "shared4", "shared5", "shared6",
+ "shared7";
+ #mbox-cells = <2>;
+ };
+
+ rtc: rtc@c2c0000 {
+ compatible = "nvidia,tegra264-rtc", "nvidia,tegra20-rtc";
+ reg = <0x0 0x0c2c0000 0x0 0x10000>;
+ interrupt-parent = <&pmc>;
+ interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA264_CLK_CLK_S>;
+ clock-names = "rtc";
+ status = "disabled";
+ };
+
+ serial@c4e0000 {
+ compatible = "nvidia,tegra264-utc";
+ reg = <0x0 0x0c4e0000 0x0 0x8000>,
+ <0x0 0x0c4e8000 0x0 0x8000>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+ rx-threshold = <4>;
+ tx-threshold = <4>;
+ status = "disabled";
+ };
+
+ serial@c5a0000 {
+ compatible = "nvidia,tegra264-utc";
+ reg = <0x0 0x0c5a0000 0x0 0x8000>,
+ <0x0 0x0c5a8000 0x0 0x8000>;
+ reg-names = "tx", "rx";
+ interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>;
+ rx-threshold = <4>;
+ tx-threshold = <4>;
+ status = "disabled";
+ };
+
+ uart0: serial@c5f0000 {
+ compatible = "arm,sbsa-uart";
+ reg = <0x0 0x0c5f0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pmc: pmc@c800000 {
+ compatible = "nvidia,tegra264-pmc";
+ reg = <0x0 0x0c800000 0x0 0x100000>,
+ <0x0 0x0c990000 0x0 0x10000>,
+ <0x0 0x0ca00000 0x0 0x10000>,
+ <0x0 0x0c980000 0x0 0x10000>,
+ <0x0 0x0c9c0000 0x0 0x40000>;
+ reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+ };
+
+ /* TOP_MMIO */
+ bus@8100000000 {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0x81 0x00000000 0x01 0x00000000>, /* MMIO */
+ <0x01 0x00000000 0x00 0x20000000 0x00 0x40000000>, /* non-prefetchable memory (32-bit) */
+ <0x02 0x00000000 0xd0 0x00000000 0x08 0x80000000>; /* ECAM, prefetchable memory, I/O */
+
+ smmu1: iommu@5000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x00 0x5000000 0x0 0x200000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 13 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror";
+ status = "disabled";
+
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ smmu2: iommu@6000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x00 0x6000000 0x0 0x200000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror";
+ status = "disabled";
+
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ mc: memory-controller@8020000 {
+ compatible = "nvidia,tegra264-mc";
+ reg = <0x00 0x8020000 0x0 0x20000>, /* MC broadcast */
+ <0x00 0x8040000 0x0 0x20000>, /* MC 0 */
+ <0x00 0x8060000 0x0 0x20000>, /* MC 1 */
+ <0x00 0x8080000 0x0 0x20000>, /* MC 2 */
+ <0x00 0x80a0000 0x0 0x20000>, /* MC 3 */
+ <0x00 0x80c0000 0x0 0x20000>, /* MC 4 */
+ <0x00 0x80e0000 0x0 0x20000>, /* MC 5 */
+ <0x00 0x8100000 0x0 0x20000>, /* MC 6 */
+ <0x00 0x8120000 0x0 0x20000>, /* MC 7 */
+ <0x00 0x8140000 0x0 0x20000>, /* MC 8 */
+ <0x00 0x8160000 0x0 0x20000>, /* MC 9 */
+ <0x00 0x8180000 0x0 0x20000>, /* MC 10 */
+ <0x00 0x81a0000 0x0 0x20000>, /* MC 11 */
+ <0x00 0x81c0000 0x0 0x20000>, /* MC 12 */
+ <0x00 0x81e0000 0x0 0x20000>, /* MC 13 */
+ <0x00 0x8200000 0x0 0x20000>, /* MC 14 */
+ <0x00 0x8220000 0x0 0x20000>; /* MC 15 */
+ reg-names = "broadcast", "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9",
+ "ch10", "ch11", "ch12", "ch13", "ch14",
+ "ch15";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ #interconnect-cells = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* limit the DMA range for memory clients to [39:0] */
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+ emc: external-memory-controller@8800000 {
+ compatible = "nvidia,tegra264-emc";
+ reg = <0x00 0x8800000 0x0 0x20000>,
+ <0x00 0x8890000 0x0 0x20000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA264_CLK_EMC>;
+ clock-names = "emc";
+
+ #interconnect-cells = <0>;
+ nvidia,bpmp = <&bpmp>;
+ };
+ };
+
+ smmu0: iommu@a000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x00 0xa000000 0x0 0x200000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror";
+ status = "disabled";
+
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ smmu4: iommu@b000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x00 0xb000000 0x0 0x200000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror";
+ status = "disabled";
+
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+
+ gic: interrupt-controller@46000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x00 0x46000000 0x0 0x010000>, /* GICD */
+ <0x00 0x46080000 0x0 0x400000>; /* GICR */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+ redistributor-stride = <0x0 0x40000>;
+ #redistributor-regions = <1>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x0 0x00 0x46000000 0x0 0x1000000>;
+
+ its: msi-controller@40000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x40000 0x0 0x40000>;
+ #msi-cells = <1>;
+ msi-controller;
+ };
+ };
+ };
+
+ /* DISP_USB MMIO */
+ bus@8800000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0x88 0x00000000 0x01 0x00000000>;
+
+ smmu3: iommu@6000000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x00 0x6000000 0x0 0x200000>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 226 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror";
+ status = "disabled";
+
+ #iommu-cells = <1>;
+ dma-coherent;
+ };
+ };
+
+ /* UPHY MMIO */
+ bus@a800000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0xa8 0x00000000 0x40 0x00000000>, /* MMIO, ECAM, prefetchable memory, I/O */
+ <0x80 0x00000000 0x00 0x20000000 0x00 0x40000000>; /* non-prefetchable memory (32-bit) */
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x00000>;
+ status = "okay";
+
+ enable-method = "psci";
+
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,armv8";
+ device_type = "cpu";
+ reg = <0x10000>;
+ status = "okay";
+
+ enable-method = "psci";
+
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ };
+ };
+
+ bpmp: bpmp {
+ compatible = "nvidia,tegra264-bpmp", "nvidia,tegra186-bpmp";
+ mboxes = <&hsp_top TEGRA_HSP_MBOX_TYPE_DB
+ TEGRA_HSP_DB_MASTER_BPMP>;
+ memory-region = <&shmem_bpmp>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ i2c {
+ compatible = "nvidia,tegra186-bpmp-i2c";
+ nvidia,bpmp-bus-id = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ thermal {
+ compatible = "nvidia,tegra186-bpmp-thermal";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ status = "okay";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
+ };
+};
*/
/dts-v1/;
+/plugin/;
-#include "apq8016-sbc.dts"
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/gpio/gpio.h>
-/ {
+&{/} {
camera_vdddo_1v8: regulator-camera-vdddo {
compatible = "regulator-fixed";
regulator-name = "camera_vdddo";
status = "okay";
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
reg = <0>;
csiphy0_ep: endpoint {
};
&cci_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
camera@3b {
compatible = "ovti,ov5640";
reg = <0x3b>;
ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
<0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */
<0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 142
ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */
<0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 75
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, André Apitzsch <git@apitzsch.eu>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "msm8976.dtsi"
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+
+/ {
+ model = "BQ Aquaris X5 Plus (Longcheer L9360)";
+ compatible = "longcheer,l9360", "qcom,msm8976";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@83200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x83200000 0x0 (1080 * 1920 * 3)>;
+ width = <1080>;
+ height = <1920>;
+ stride = <(1080 * 3)>;
+ format = "r8g8b8";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_sensor_default>, <&volume_up_default>;
+ pinctrl-names = "default";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ gpios = <&tlmm 101 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_WHITE>;
+ default-state = "off";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+
+ pinctrl-0 = <&button_backlight_default>;
+ pinctrl-names = "default";
+ };
+ };
+
+ reg_ts_vdd: regulator-vdd-ts {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-vdd-ts";
+
+ gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ framebuffer@83000000 {
+ reg = <0x0 0x83000000 0x0 0x2800000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "kinetic,ktd2026";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+};
+
+&blsp1_i2c4 {
+ status = "okay";
+
+ nfc@28 {
+ compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupts-extended = <&tlmm 140 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&nfc_default>;
+ pinctrl-1 = <&nfc_sleep>;
+ pinctrl-names = "default", "sleep";
+ };
+};
+
+&blsp2_i2c2 {
+ status = "okay";
+
+ touchscreen@20 {
+ reg = <0x20>;
+ compatible = "syna,rmi4-i2c";
+
+ interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&ts_int_default>, <&ts_reset_default>;
+ pinctrl-1 = <&ts_int_sleep>, <&ts_reset_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ vdd-supply = <&pm8950_l6>;
+ vio-supply = <®_ts_vdd>;
+
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <200>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
+};
+
+&gcc {
+ vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&pm8004_spmi_regulators {
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+
+ /* Cluster 1 supply */
+ pm8004_s2: s2 {
+ /* regulator-min-microvolt = <500000>; */
+ /* Set .95V to prevent unstabilities until CPR for this SoC is done */
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-name = "vdd_apc1";
+ /* Set always on until the CPU PLL is done */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8004_s5: s5 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-name = "vdd_gfx";
+ /* Hack this on until the gpu driver is ready for it */
+ regulator-always-on;
+ };
+};
+
+&pm8950_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8950_spmi_regulators {
+ vdd_s5-supply = <&vph_pwr>;
+
+ /* Cluster 0 supply */
+ pm8950_spmi_s5: s5 {
+ /* Set .95V to prevent unstabilities until CPR for this SoC is done */
+ /* regulator-min-microvolt = <500000>; */
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1165000>;
+ regulator-name = "vdd_apc0";
+ /* Set always on until the CPU PLL is done */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&rpm_requests {
+ pm8950_regulators: regulators {
+ compatible = "qcom,rpm-pm8950-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_l1_l19-supply = <&pm8950_s3>;
+ vdd_l2_l23-supply = <&pm8950_s3>;
+ vdd_l3-supply = <&pm8950_s3>;
+ vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+ vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+ pm8950_s1: s1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1162500>;
+ };
+
+ pm8950_s3: s3 {
+ regulator-min-microvolt = <1325000>;
+ regulator-max-microvolt = <1325000>;
+ };
+
+ pm8950_s4: s4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8950_l1: l1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8950_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8950_l3: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ pm8950_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l8: l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8950_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l10: l10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8950_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8950_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8950_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8950_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8950_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8950_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8950_l19: l19 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8950_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8950_l23: l23 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&pm8950_l8>;
+ vqmmc-supply = <&pm8950_l5>;
+ status = "okay";
+};
+
+&sdhc_2 {
+ bus-width = <4>;
+ cd-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&pm8950_l11>;
+ vqmmc-supply = <&pm8950_l12>;
+
+ pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+
+ button_backlight_default: button-backlight-default-state {
+ pins = "gpio101";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ hall_sensor_default: hall-sensor-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ nfc_default: nfc-default-state {
+ pins = "gpio122", "gpio140";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ nfc_sleep: nfc-sleep-state {
+ int-pins {
+ pins = "gpio140";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ ven-pins {
+ pins = "gpio122";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio100";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sdc2_cd_sleep: sdc2-cd-sleep-state {
+ pins = "gpio100";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts_int_default: ts-int-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ ts_int_sleep: ts-int-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ ts_reset_default: ts-reset-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_reset_sleep: ts-sleep-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ volume_up_default: volume-up-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&xo_board {
+ clock-frequency = <19200000>;
+};
bias-disable;
};
+ sdc2_default: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_sleep: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
wcss_wlan_default: wcss-wlan-default-state {
wcss-wlan2-pins {
pins = "gpio40";
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,controlled-remotely;
};
blsp1_uart1: serial@78af000 {
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
+ qcom,controlled-remotely;
};
blsp2_uart2: serial@7af0000 {
device_type = "pci";
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
device_type = "pci";
- interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
device_type = "pci";
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
#interrupt-cells = <1>;
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
#iommu-cells = <2>;
};
+ camss: camss@5c6e000 {
+ compatible = "qcom,qcm2290-camss";
+
+ reg = <0x0 0x5c6e000 0x0 0x1000>,
+ <0x0 0x5c75000 0x0 0x1000>,
+ <0x0 0x5c52000 0x0 0x1000>,
+ <0x0 0x5c53000 0x0 0x1000>,
+ <0x0 0x5c66000 0x0 0x400>,
+ <0x0 0x5c68000 0x0 0x400>,
+ <0x0 0x5c11000 0x0 0x1000>,
+ <0x0 0x5c6f000 0x0 0x4000>,
+ <0x0 0x5c76000 0x0 0x4000>;
+ reg-names = "csid0",
+ "csid1",
+ "csiphy0",
+ "csiphy1",
+ "csitpg0",
+ "csitpg1",
+ "top",
+ "vfe0",
+ "vfe1";
+
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMSS_AXI_CLK>,
+ <&gcc GCC_CAMSS_NRT_AXI_CLK>,
+ <&gcc GCC_CAMSS_RT_AXI_CLK>,
+ <&gcc GCC_CAMSS_TFE_0_CSID_CLK>,
+ <&gcc GCC_CAMSS_TFE_1_CSID_CLK>,
+ <&gcc GCC_CAMSS_CPHY_0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CPHY_1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_TFE_0_CLK>,
+ <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>,
+ <&gcc GCC_CAMSS_TFE_1_CLK>,
+ <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ;
+ clock-names = "ahb",
+ "axi",
+ "camnoc_nrt_axi",
+ "camnoc_rt_axi",
+ "csi0",
+ "csi1",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "top_ahb",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe1",
+ "vfe1_cphy_rx";
+
+ interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csiphy0",
+ "csiphy1",
+ "csitpg0",
+ "csitpg1",
+ "vfe0",
+ "vfe1";
+
+ interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+ &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>,
+ <&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+ <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "ahb",
+ "hf_mnoc",
+ "sf_mnoc";
+
+ iommus = <&apps_smmu 0x400 0x0>,
+ <&apps_smmu 0x800 0x0>,
+ <&apps_smmu 0x820 0x0>,
+ <&apps_smmu 0x840 0x0>;
+
+ power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
mdss: display-subsystem@5e00000 {
compatible = "qcom,qcm2290-mdss";
reg = <0x0 0x05e00000 0x0 0x1000>;
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs615/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs615/cdsp.mbn";
+
+ status = "okay";
+};
+
&rpmhcc {
clocks = <&xo_board_clk>;
};
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+ /* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */
+ mboxes = <&apss_shared 26>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 6>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ };
+
qup_opp_table: opp-table-qup {
compatible = "operating-points-v2";
opp-shared;
no-map;
hwlocks = <&tcsr_mutex 3>;
};
+
+ rproc_cdsp_mem: rproc-cdsp@93b00000 {
+ reg = <0x0 0x93b00000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ rproc_adsp_mem: rproc-adsp@95900000 {
+ reg = <0x0 0x95900000 0x0 0x1e00000>;
+ no-map;
+ };
};
soc: soc@0 {
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
+ status = "disabled";
in-ports {
port {
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
+
+ /* Not all required clocks can be enabled from the OS */
+ status = "fail";
};
cti@6c20000 {
clock-names = "apb_pclk";
};
+ remoteproc_cdsp: remoteproc@8300000 {
+ compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas";
+ reg = <0x0 0x08300000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ power-domain-names = "cx";
+
+ memory-region = <&rproc_cdsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 4>;
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
+
pmu@90b6300 {
compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon";
reg = <0x0 0x090b6300 0x0 0x600>;
reg = <0x0 0x0c3f0000 0x0 0x400>;
};
+ sram@14680000 {
+ compatible = "qcom,qcs615-imem", "syscon", "simple-mfd";
+ reg = <0x0 0x14680000 0x0 0x2c000>;
+ ranges = <0 0 0x14680000 0x2c000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pil-reloc@2a94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x2a94c 0xc8>;
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,qcs615-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0x0 0x15000000 0x0 0x80000>;
maximum-speed = "high-speed";
};
};
+
+ remoteproc_adsp: remoteproc@62400000 {
+ compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas";
+ reg = <0x0 0x62400000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ power-domain-names = "cx";
+
+ memory-region = <&rproc_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink_edge: glink-edge {
+ interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 24>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
};
arch_timer: timer {
};
};
+&iris {
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
};
};
+ iris: video-codec@aa00000 {
+ compatible = "qcom,qcs8300-iris";
+
+ reg = <0x0 0x0aa00000 0x0 0xf0000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+ <&videocc VIDEO_CC_MVS0_GDSC>,
+ <&rpmhpd RPMHPD_MX>,
+ <&rpmhpd RPMHPD_MMCX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "mxc",
+ "mmcx";
+
+ operating-points-v2 = <&iris_opp_table>;
+
+ clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>;
+ clock-names = "iface",
+ "core",
+ "vcodec0_core";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-cfg",
+ "video-mem";
+
+ memory-region = <&video_mem>;
+
+ resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+ reset-names = "bus";
+
+ iommus = <&apps_smmu 0x0880 0x0400>,
+ <&apps_smmu 0x0887 0x0400>;
+ dma-coherent;
+
+ status = "disabled";
+
+ iris_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-366000000 {
+ opp-hz = /bits/ 64 <366000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-444000000 {
+ opp-hz = /bits/ 64 <444000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-533000000 {
+ opp-hz = /bits/ 64 <533000000>;
+ required-opps = <&rpmhpd_opp_turbo>,
+ <&rpmhpd_opp_turbo>;
+ };
+
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>,
+ <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
videocc: clock-controller@abf0000 {
compatible = "qcom,qcs8300-videocc";
reg = <0x0 0x0abf0000 0x0 0x10000>;
#include <dt-bindings/clock/qcom,camcc-sm8250.h>
#include <dt-bindings/gpio/gpio.h>
-&camcc {
- status = "okay";
-};
-
&camss {
vdda-phy-supply = <&vreg_l5a_0p88>;
vdda-pll-supply = <&vreg_l9a_1p2>;
stdout-path = "serial0:115200n8";
};
+ vreg_12p0: vreg-12p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_12P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vreg_5p0: vreg-5p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_5P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vreg_12p0>;
+ };
+
+ vreg_1p8: vreg-1p8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_1P8";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&vreg_5p0>;
+ };
+
+ vreg_1p0: vreg-1p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_1P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ vin-supply = <&vreg_1p8>;
+ };
+
+ vreg_3p0: vreg-3p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_3P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ vin-supply = <&vreg_12p0>;
+ };
+
vreg_conn_1p8: vreg_conn_1p8 {
compatible = "regulator-fixed";
regulator-name = "vreg_conn_1p8";
};
};
};
+
+ dp-dsi0-connector {
+ compatible = "dp-connector";
+ label = "DSI0";
+ type = "full-size";
+
+ port {
+ dp_dsi0_connector_in: endpoint {
+ remote-endpoint = <&dsi2dp_bridge0_out>;
+ };
+ };
+ };
+
+ dp-dsi1-connector {
+ compatible = "dp-connector";
+ label = "DSI1";
+ type = "full-size";
+
+ port {
+ dp_dsi1_connector_in: endpoint {
+ remote-endpoint = <&dsi2dp_bridge1_out>;
+ };
+ };
+ };
};
&apps_rsc {
&i2c18 {
clock-frequency = <400000>;
+
+ status = "okay";
+
+ io_expander: gpio@74 {
+ compatible = "ti,tca9539";
+ reg = <0x74>;
+ interrupts-extended = <&tlmm 98 IRQ_TYPE_EDGE_BOTH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&io_expander_intr_active>,
+ <&io_expander_reset_active>;
+ pinctrl-names = "default";
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9543";
+ #address-cells = <1>;
+
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ interrupts-extended = <&io_expander 2 IRQ_TYPE_EDGE_FALLING>;
+ enable-gpios = <&io_expander 1 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&vreg_1p0>;
+ vdd18-supply = <&vreg_1p8>;
+ vdd33-supply = <&vreg_3p0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsi2dp_bridge0_in: endpoint {
+ remote-endpoint = <&mdss0_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi2dp_bridge0_out: endpoint {
+ remote-endpoint = <&dp_dsi0_connector_in>;
+ };
+ };
+ };
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ interrupts-extended = <&io_expander 10 IRQ_TYPE_EDGE_FALLING>;
+ enable-gpios = <&io_expander 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&io_expander 8 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&vreg_1p0>;
+ vdd18-supply = <&vreg_1p8>;
+ vdd33-supply = <&vreg_3p0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsi2dp_bridge1_in: endpoint {
+ remote-endpoint = <&mdss0_dsi1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi2dp_bridge1_out: endpoint {
+ remote-endpoint = <&dp_dsi1_connector_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+};
+
+&iris {
+ firmware-name = "qcom/vpu/vpu30_p4_s6.mbn";
+
status = "okay";
};
status = "okay";
};
+&mdss0_dsi0 {
+ vdda-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&mdss0_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&dsi2dp_bridge0_in>;
+};
+
+&mdss0_dsi0_phy {
+ vdds-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
+&mdss0_dsi1 {
+ vdda-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&mdss0_dsi1_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&dsi2dp_bridge1_in>;
+};
+
+&mdss0_dsi1_phy {
+ vdds-supply = <&vreg_l4a>;
+
+ status = "okay";
+};
+
&pmm8654au_0_gpios {
gpio-line-names = "DS_EN",
"POFF_COMPLETE",
};
};
+ io_expander_intr_active: io-expander-intr-active-state {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ io_expander_reset_active: io-expander-reset-active-state {
+ pins = "gpio97";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
pcie0_default_state: pcie0-default-state {
perst-pins {
pins = "gpio2";
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/firmware/qcom,scm.h>
next-level-cache = <&l2_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
next-level-cache = <&l2_1>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
next-level-cache = <&l2_2>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_2: l2-cache {
compatible = "cache";
cache-level = <2>;
next-level-cache = <&l2_3>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl0 MASTER_EPSS_L3_APPS
+ &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
l2_3: l2-cache {
compatible = "cache";
cache-level = <2>;
next-level-cache = <&l2_4>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_4: l2-cache {
compatible = "cache";
cache-level = <2>;
next-level-cache = <&l2_5>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_5: l2-cache {
compatible = "cache";
cache-level = <2>;
next-level-cache = <&l2_6>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_6: l2-cache {
compatible = "cache";
cache-level = <2>;
next-level-cache = <&l2_7>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&epss_l3_cl1 MASTER_EPSS_L3_APPS
+ &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
l2_7: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1459200000 {
+ opp-hz = /bits/ 64 <1459200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1862400000 {
+ opp-hz = /bits/ 64 <1862400000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1939200000 {
+ opp-hz = /bits/ 64 <1939200000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2265600000 {
+ opp-hz = /bits/ 64 <2265600000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2457600000 {
+ opp-hz = /bits/ 64 <2457600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2553600000 {
+ opp-hz = /bits/ 64 <2553600000>;
+ opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+ };
+ };
+
+ cpu4_opp_table: opp-table-cpu4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1459200000 {
+ opp-hz = /bits/ 64 <1459200000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ opp-peak-kBps = <(1555200 * 4) (921600 * 32)>;
+ };
+
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1862400000 {
+ opp-hz = /bits/ 64 <1862400000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-1939200000 {
+ opp-hz = /bits/ 64 <1939200000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2016000000 {
+ opp-hz = /bits/ 64 <2016000000>;
+ opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>;
+ };
+
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2265600000 {
+ opp-hz = /bits/ 64 <2265600000>;
+ opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>;
+ };
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2457600000 {
+ opp-hz = /bits/ 64 <2457600000>;
+ opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+ };
+
+ opp-2553600000 {
+ opp-hz = /bits/ 64 <2553600000>;
+ opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>;
+ };
+ };
+
dummy-sink {
compatible = "arm,coresight-dummy-sink";
interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
};
+ iris: video-codec@aa00000 {
+ compatible = "qcom,sa8775p-iris", "qcom,sm8550-iris";
+
+ reg = <0x0 0x0aa00000 0x0 0xf0000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+ <&videocc VIDEO_CC_MVS0_GDSC>,
+ <&rpmhpd SA8775P_MX>,
+ <&rpmhpd SA8775P_MMCX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "mxc",
+ "mmcx";
+ operating-points-v2 = <&iris_opp_table>;
+
+ clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>;
+ clock-names = "iface",
+ "core",
+ "vcodec0_core";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-cfg",
+ "video-mem";
+
+ memory-region = <&pil_video_mem>;
+
+ resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+ reset-names = "bus";
+
+ iommus = <&apps_smmu 0x0880 0x0400>,
+ <&apps_smmu 0x0887 0x0400>;
+ dma-coherent;
+
+ status = "disabled";
+
+ iris_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-366000000 {
+ opp-hz = /bits/ 64 <366000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-444000000 {
+ opp-hz = /bits/ 64 <444000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-533000000 {
+ opp-hz = /bits/ 64 <533000000>;
+ required-opps = <&rpmhpd_opp_turbo>,
+ <&rpmhpd_opp_turbo>;
+ };
+
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>,
+ <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
videocc: clock-controller@abf0000 {
compatible = "qcom,sa8775p-videocc";
reg = <0x0 0x0abf0000 0x0 0x10000>;
remote-endpoint = <&mdss0_dp1_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss0_dsi0_in>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss0_dsi1_in>;
+ };
+ };
};
mdss0_mdp_opp_table: opp-table {
};
};
+ mdss0_dsi0: dsi@ae94000 {
+ compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0 0x0ae94000 0x0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <4>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>;
+ phys = <&mdss0_dsi0_phy>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss0_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss0_dsi0_out: endpoint{ };
+ };
+ };
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss0_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sa8775p-dsi-phy-5nm";
+ reg = <0x0 0x0ae94400 0x0 0x200>,
+ <0x0 0x0ae94600 0x0 0x280>,
+ <0x0 0x0ae94900 0x0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss0_dsi1: dsi@ae96000 {
+ compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0 0x0ae96000 0x0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <5>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+ phys = <&mdss0_dsi1_phy>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss0_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss0_dsi1_out: endpoint { };
+ };
+ };
+ };
+
+ mdss0_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sa8775p-dsi-phy-5nm";
+ reg = <0x0 0x0ae96400 0x0 0x200>,
+ <0x0 0x0ae96600 0x0 0x280>,
+ <0x0 0x0ae96900 0x0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
mdss0_dp0_phy: phy@aec2a00 {
compatible = "qcom,sa8775p-edp-phy";
<&sleep_clk>,
<&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>,
<&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>,
- <0>, <0>, <0>, <0>;
+ <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>,
+ <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+ <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
power-domains = <&rpmhpd SA8775P_MMCX>;
#clock-cells = <1>;
#reset-cells = <1>;
};
};
+ epss_l3_cl0: interconnect@18590000 {
+ compatible = "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18590000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,sa8775p-cpufreq-epss",
"qcom,cpufreq-epss";
#freq-domain-cells = <1>;
};
+ epss_l3_cl1: interconnect@18592000 {
+ compatible = "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18592000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
remoteproc_gpdsp0: remoteproc@20c00000 {
compatible = "qcom,sa8775p-gpdsp0-pas";
reg = <0x0 0x20c00000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
<&smp2p_gpdsp0_in 0 0>,
- <&smp2p_gpdsp0_in 2 0>,
<&smp2p_gpdsp0_in 1 0>,
+ <&smp2p_gpdsp0_in 2 0>,
<&smp2p_gpdsp0_in 3 0>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
<&smp2p_gpdsp1_in 0 0>,
- <&smp2p_gpdsp1_in 2 0>,
<&smp2p_gpdsp1_in 1 0>,
+ <&smp2p_gpdsp1_in 2 0>,
<&smp2p_gpdsp1_in 3 0>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack";
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0", "msi1", "msi2", "msi3",
- "msi4", "msi5", "msi6", "msi7";
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0", "msi1", "msi2", "msi3",
- "msi4", "msi5", "msi6", "msi7";
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
#interrupt-cells = <4>;
};
- sram@146aa000 {
+ sram@14680000 {
compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
- reg = <0 0x146aa000 0 0x2000>;
+ reg = <0 0x14680000 0 0x2e000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 0x146aa000 0x2000>;
+ ranges = <0 0 0x14680000 0x2e000>;
- pil-reloc@94c {
+ pil-reloc@2a94c {
compatible = "qcom,pil-reloc-info";
- reg = <0x94c 0xc8>;
+ reg = <0x2a94c 0xc8>;
};
};
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0", "msi1", "msi2", "msi3",
- "msi4", "msi5", "msi6", "msi7";
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
#include <dt-bindings/clock/qcom,gcc-sc8180x.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8180x-camcc.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8180x.h>
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "ref",
- "tbu";
+ "slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
assigned-clock-rates = <19200000>;
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<&gcc GCC_PCIE_3_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_3_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_PCIE_3_CLKREF_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "ref",
- "tbu";
+ "slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
assigned-clock-rates = <19200000>;
<GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_PCIE_1_CLKREF_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "ref",
- "tbu";
+ "slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
<GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_2_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_PCIE_2_CLKREF_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "ref",
- "tbu";
+ "slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
assigned-clock-rates = <19200000>;
};
};
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,sc8180x-camcc";
+ reg = <0 0x0ad00000 0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SC8180X_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: mdss@ae00000 {
compatible = "qcom,sc8180x-mdss";
reg = <0 0x0ae00000 0 0x1000>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
- interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "msi";
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
#interrupt-cells = <4>;
};
- sram@146bf000 {
+ sram@14680000 {
compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
- reg = <0 0x146bf000 0 0x1000>;
+ reg = <0 0x14680000 0 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 0x146bf000 0x1000>;
+ ranges = <0 0 0x14680000 0x40000>;
- pil-reloc@94c {
+ pil-reloc@3f94c {
compatible = "qcom,pil-reloc-info";
- reg = <0x94c 0xc8>;
+ reg = <0x3f94c 0xc8>;
};
};
};
};
+&slpi_pas {
+ firmware-name = "qcom/sdm850/LENOVO/81JL/qcslpi850.mbn";
+
+ status = "okay";
+};
+
&sound {
compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
model = "Lenovo-YOGA-C630-13Q50";
bias-pull-up;
};
+ qup_uart4_default: qup-uart4-default-state {
+ pins = "gpio12", "gpio13";
+ function = "qup4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sdc1_state_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
reg = <0x0 0x04a90000 0x0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
#include <dt-bindings/thermal/thermal.h>
/ {
label = "lpass";
qcom,remote-pid = <2>;
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ service@3 {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: clock-controller {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1001 0x0>;
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
};
};
+ videocc: clock-controller@aaf0000 {
+ compatible = "qcom,sm6350-videocc";
+ reg = <0x0 0x0aaf0000 0x0 0x10000>;
+ clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>;
+ clock-names = "iface",
+ "bi_tcxo",
+ "sleep_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
cci0: cci@ac4a000 {
compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
reg = <0x0 0x0ac4a000 0x0 0x1000>;
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "tbu",
- "ref";
+ "slave_q2a";
iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
<0x100 &apps_smmu 0x1d81 0x1>;
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
- <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
- "slave_q2a",
- "tbu",
- "ref";
+ "slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
- status = "disabled";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
sram@c3f0000 {
compatible = "qcom,rpmh-stats";
reg = <0 0x0c3f0000 0 0x400>;
+ qcom,qmp = <&aoss_qmp>;
};
spmi_bus: spmi@c400000 {
};
};
+ camss: isp@acb7000 {
+ compatible = "qcom,sm8550-camss";
+
+ reg = <0x0 0x0acb7000 0x0 0x0d00>,
+ <0x0 0x0acb9000 0x0 0x0d00>,
+ <0x0 0x0acbb000 0x0 0x0d00>,
+ <0x0 0x0acca000 0x0 0x0a00>,
+ <0x0 0x0acce000 0x0 0x0a00>,
+ <0x0 0x0acb6000 0x0 0x1000>,
+ <0x0 0x0ace4000 0x0 0x2000>,
+ <0x0 0x0ace6000 0x0 0x2000>,
+ <0x0 0x0ace8000 0x0 0x2000>,
+ <0x0 0x0acea000 0x0 0x2000>,
+ <0x0 0x0acec000 0x0 0x2000>,
+ <0x0 0x0acee000 0x0 0x2000>,
+ <0x0 0x0acf0000 0x0 0x2000>,
+ <0x0 0x0acf2000 0x0 0x2000>,
+ <0x0 0x0ac62000 0x0 0xf000>,
+ <0x0 0x0ac71000 0x0 0xf000>,
+ <0x0 0x0ac80000 0x0 0xf000>,
+ <0x0 0x0accb000 0x0 0x1800>,
+ <0x0 0x0accf000 0x0 0x1800>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csid_wrapper",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csiphy6",
+ "csiphy7",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY6_CLK>,
+ <&camcc CAM_CC_CSI6PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY7_CLK>,
+ <&camcc CAM_CC_CSI7PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_2_CLK>,
+ <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cpas_fast_ahb_clk",
+ "cpas_ife_lite",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "cpas_vfe2",
+ "csid",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "csiphy6",
+ "csiphy6_timer",
+ "csiphy7",
+ "csiphy7_timer",
+ "csiphy_rx",
+ "gcc_axi_hf",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe2",
+ "vfe2_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csiphy6",
+ "csiphy7",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_0_mnoc";
+
+ iommus = <&apps_smmu 0x800 0x20>;
+
+ power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+ <&camcc CAM_CC_IFE_1_GDSC>,
+ <&camcc CAM_CC_IFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ };
+
+ port@6 {
+ reg = <6>;
+ };
+
+ port@7 {
+ reg = <7>;
+ };
+ };
+ };
+
camcc: clock-controller@ade0000 {
compatible = "qcom,sm8550-camcc";
reg = <0 0x0ade0000 0 0x20000>;
sram@c3f0000 {
compatible = "qcom,rpmh-stats";
reg = <0 0x0c3f0000 0 0x400>;
+ qcom,qmp = <&aoss_qmp>;
};
spmi_bus: spmi@c400000 {
status = "okay";
};
+&iris {
+ status = "okay";
+};
+
&gpu {
status = "okay";
};
};
+&iris {
+ status = "okay";
+};
+
&lpass_tlmm {
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio21";
status = "okay";
};
+&iris {
+ status = "okay";
+};
+
&gpu {
status = "okay";
};
};
+ iris: video-codec@aa00000 {
+ compatible = "qcom,sm8650-iris";
+ reg = <0 0x0aa00000 0 0xf0000>;
+
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+ <&videocc VIDEO_CC_MVS0_GDSC>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_MMCX>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "mxc",
+ "mmcx";
+
+ operating-points-v2 = <&iris_opp_table>;
+
+ clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>;
+ clock-names = "iface",
+ "core",
+ "vcodec0_core";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-cfg",
+ "video-mem";
+
+ memory-region = <&video_mem>;
+
+ resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+ <&videocc VIDEO_CC_XO_CLK_ARES>,
+ <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+ reset-names = "bus",
+ "xo",
+ "core";
+
+ iommus = <&apps_smmu 0x1940 0>,
+ <&apps_smmu 0x1947 0>;
+
+ dma-coherent;
+
+ /*
+ * IRIS firmware is signed by vendors, only
+ * enable in boards where the proper signed firmware
+ * is available.
+ */
+ status = "disabled";
+
+ iris_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-196000000 {
+ opp-hz = /bits/ 64 <196000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>,
+ <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-380000000 {
+ opp-hz = /bits/ 64 <380000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_svs>;
+ };
+
+ opp-435000000 {
+ opp-hz = /bits/ 64 <435000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-533333334 {
+ opp-hz = /bits/ 64 <533333334>;
+ required-opps = <&rpmhpd_opp_turbo>,
+ <&rpmhpd_opp_turbo>;
+ };
+ };
+ };
+
videocc: clock-controller@aaf0000 {
compatible = "qcom,sm8650-videocc";
reg = <0 0x0aaf0000 0 0x10000>;
sram@c3f0000 {
compatible = "qcom,rpmh-stats";
reg = <0 0x0c3f0000 0 0x400>;
+ qcom,qmp = <&aoss_qmp>;
};
spmi_bus: spmi@c400000 {
compatible = "qcom,rpmh-rsc";
reg = <0 0x17a00000 0 0x10000>,
<0 0x17a10000 0 0x10000>,
- <0 0x17a20000 0 0x10000>,
- <0 0x17a30000 0 0x10000>;
+ <0 0x17a20000 0 0x10000>;
reg-names = "drv-0",
"drv-1",
"drv-2";
serial0 = &uart7;
};
+ wcd939x: audio-codec {
+ compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+ vdd-px-supply = <&vreg_l2i_1p2>;
+
+ #sound-dai-cells = <1>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
};
};
+ sound {
+ compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
+ model = "SM8750-MTP";
+ audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3", /* MIC4 on schematics */
+ "VA DMIC1", "MIC BIAS3", /* MIC1 on schematics */
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "VA DMIC0", "VA MIC BIAS3",
+ "VA DMIC1", "VA MIC BIAS3",
+ "VA DMIC2", "VA MIC BIAS1",
+ "VA DMIC3", "VA MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
};
};
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
&pm8550_flash {
status = "okay";
status = "fail";
};
+&swr0 {
+ status = "okay";
+
+ /* WSA883x, left/front speaker */
+ left_spkr: speaker@0,1 {
+ compatible = "sdw10217020200";
+ reg = <0 1>;
+ pinctrl-0 = <&spkr_0_sd_n_active>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #thermal-sensor-cells = <0>;
+ vdd-supply = <&vreg_l15b_1p8>;
+ };
+
+ /* WSA883x, right/back speaker */
+ right_spkr: speaker@0,2 {
+ compatible = "sdw10217020200";
+ reg = <0 2>;
+ pinctrl-0 = <&spkr_1_sd_n_active>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #thermal-sensor-cells = <0>;
+ vdd-supply = <&vreg_l15b_1p8>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9395 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010e00";
+ reg = <0 4>;
+
+ /*
+ * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
+ * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
+ * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
+ * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
+ * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
+ * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+ */
+ qcom,rx-port-mapping = <1 2 3 4 5 9>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9395 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010e00";
+ reg = <0 3>;
+
+ /*
+ * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+ * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+ * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+ * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+ */
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
&tlmm {
/* reserved for secure world */
gpio-reserved-ranges = <36 4>, <74 1>;
&uart7 {
status = "okay";
};
+
+/* Pinctrl */
+&lpass_tlmm {
+ spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&tlmm {
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio101";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1j_0p91>;
+ vdda-pll-supply = <&vreg_l3g_1p2>;
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1d_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
serial0 = &uart7;
};
+ wcd939x: audio-codec {
+ compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+ /*
+ * Mismatch with schematics - downstream DTS has L15B at 1.8 V,
+ * schematics L2I at 1.2 V
+ */
+ vdd-px-supply = <&vreg_l15b_1p8>;
+
+ #sound-dai-cells = <1>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
};
};
+ sound {
+ compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
+ model = "SM8750-QRD";
+ audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "AMIC3", "MIC BIAS3",
+ "AMIC4", "MIC BIAS3",
+ "AMIC5", "MIC BIAS4",
+ "TX SWR_INPUT0", "ADC1_OUTPUT",
+ "TX SWR_INPUT1", "ADC2_OUTPUT",
+ "TX SWR_INPUT2", "ADC3_OUTPUT",
+ "TX SWR_INPUT3", "ADC4_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
status = "okay";
};
+&swr0 {
+ status = "okay";
+
+ /* WSA8845, Speaker North */
+ north_spkr: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ pinctrl-0 = <&spkr_0_sd_n_active>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l2i_1p2>;
+
+ /*
+ * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
+ * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
+ * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
+ * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
+ * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+ * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
+ */
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Speaker South */
+ south_spkr: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ pinctrl-0 = <&spkr_1_sd_n_active>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l2i_1p2>;
+
+ /*
+ * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
+ * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
+ * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
+ * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
+ * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+ * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
+ */
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9395 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010e00";
+ reg = <0 4>;
+
+ /*
+ * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
+ * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
+ * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
+ * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
+ * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
+ * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+ */
+ qcom,rx-port-mapping = <1 2 3 4 5 9>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9395 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010e00";
+ reg = <0 3>;
+
+ /*
+ * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+ * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+ * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+ * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+ */
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
&tlmm {
/* reserved for secure world */
gpio-reserved-ranges = <36 4>, <74 1>;
+
+ spkr_0_sd_n_active: spkr-0-sd-n-active-state {
+ pins = "gpio76";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+ pins = "gpio77";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio101";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
};
&uart7 {
status = "okay";
};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1j_0p91>;
+ vdda-pll-supply = <&vreg_l3g_1p2>;
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1d_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
#include <dt-bindings/clock/qcom,sm8750-gcc.h>
#include <dt-bindings/clock/qcom,sm8750-tcsr.h>
#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
exit-latency-us = <130>;
min-residency-us = <686>;
};
-
};
domain-idle-states {
interconnect-names = "qup-core",
"qup-config";
-
pinctrl-0 = <&qup_uart7_default>;
pinctrl-names = "default";
#interconnect-cells = <2>;
clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
-
};
aggre1_noc: interconnect@16e0000 {
#interconnect-cells = <2>;
clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
-
};
aggre2_noc: interconnect@1700000 {
#sound-dai-cells = <1>;
};
+ swr3: soundwire@6ab0000 {
+ compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+ reg = <0x0 0x06ab0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsa2macro>;
+ clock-names = "iface";
+ label = "WSA2";
+
+ pinctrl-0 = <&wsa2_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <9>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_rxmacro: codec@6ac0000 {
compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
reg = <0x0 0x06ac0000 0x0 0x1000>;
#sound-dai-cells = <1>;
};
+ swr1: soundwire@6ad0000 {
+ compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+ reg = <0x0 0x06ad0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_rxmacro>;
+ clock-names = "iface";
+ label = "RX";
+
+ pinctrl-0 = <&rx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <1>;
+ qcom,dout-ports = <11>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0x31 0xff 0xff 0xff>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0x0f 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0x18 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_txmacro: codec@6ae0000 {
compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
reg = <0x0 0x06ae0000 0x0 0x1000>;
#sound-dai-cells = <1>;
};
+ swr0: soundwire@6b10000 {
+ compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+ reg = <0x0 0x06b10000 0x0 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lpass_wsamacro>;
+ clock-names = "iface";
+ label = "WSA";
+
+ pinctrl-0 = <&wsa_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <9>;
+
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
+ qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_ag_noc: interconnect@7e40000 {
compatible = "qcom,sm8750-lpass-ag-noc";
reg = <0x0 0x07e40000 0x0 0xe080>;
#interconnect-cells = <2>;
};
+ swr2: soundwire@7630000 {
+ compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0";
+ reg = <0x0 0x07630000 0x0 0x10000>;
+ interrupts = <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "core", "wakeup";
+ clocks = <&lpass_txmacro>;
+ clock-names = "iface";
+ label = "TX";
+
+ pinctrl-0 = <&tx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,din-ports = <4>;
+ qcom,dout-ports = <0>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
+ qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
+ qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
+ qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
+ qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
lpass_vamacro: codec@7660000 {
compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
reg = <0x0 0x07660000 0x0 0x2000>;
sram@c3f0000 {
compatible = "qcom,rpmh-stats";
reg = <0x0 0x0c3f0000 0x0 0x400>;
+ qcom,qmp = <&aoss_qmp>;
};
spmi_bus: spmi@c400000 {
};
};
+ ufs_mem_phy: phy@1d80000 {
+ compatible = "qcom,sm8750-qmp-ufs-phy";
+ reg = <0x0 0x01d80000 0x0 0x2000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&tcsrcc TCSR_UFS_CLKREF_EN>;
+
+ clock-names = "ref",
+ "ref_aux",
+ "qref";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufs@1d84000 {
+ compatible = "qcom,sm8750-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x0 0x01d84000 0x0 0x3000>;
+
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_LN_BB_CLK3>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+
+ operating-points-v2 = <&ufs_opp_table>;
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0x60 0>;
+ dma-coherent;
+
+ lanes-per-direction = <2>;
+
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+
+ #reset-cells = <1>;
+
+ status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <100000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-403000000 {
+ opp-hz = /bits/ 64 <403000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <403000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
apps_rsc: rsc@16500000 {
compatible = "qcom,rpmh-rsc";
reg = <0x0 0x16500000 0x0 0x10000>,
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+ model = "ASUS Zenbook A14";
+ chassis-type = "laptop";
+
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ label = "lid";
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&cam_indicator_en>;
+ pinctrl-names = "default";
+
+ led-camera-indicator {
+ label = "white:camera-indicator";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ /* Reuse as a panic indicator until we get a "camera on" trigger */
+ panic-indicator;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Left-side display-adjacent port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss0_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
+ };
+ };
+ };
+ };
+
+ /* Left-side user-adjacent port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&retimer_ss1_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss1_con_sbu_out>;
+ };
+ };
+ };
+ };
+ };
+
+ reserved-memory {
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ sound {
+ compatible = "qcom,x1e80100-sndcard";
+ model = "X1E80100-ASUS-Zenbook-A14";
+ audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC0", "VA MIC BIAS1",
+ "VA DMIC1", "VA MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 1>,
+ <&lpass_txmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>,
+ <&lpass_rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>,
+ <&swr0 0>, <&lpass_wsamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_MISC_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&misc_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vreg_vph_pwr>;
+ vdd-bob2-supply = <&vreg_vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vreg_vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p9: ldo3 {
+ regulator-name = "vreg_l3c_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vreg_vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vreg_vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vreg_vph_pwr>;
+ vdd-s2-supply = <&vreg_vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vreg_vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p9: ldo1 {
+ regulator-name = "vreg_l1j_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ELAN, 04F3:3315 */
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&tpad_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* Left-side display-adjacent port */
+ typec-mux@8 {
+ compatible = "parade,ps8833", "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+ vdd-supply = <&vreg_rtmr0_1p15>;
+ vdd33-supply = <&vreg_rtmr0_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+ vddar-supply = <&vreg_rtmr0_1p15>;
+ vddat-supply = <&vreg_rtmr0_1p15>;
+ vddio-supply = <&vreg_rtmr0_1p8>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr0_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss0_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss0_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ASUSTeK, 0B05:4543 */
+ hdtl@17 {
+ compatible = "hid-over-i2c";
+ reg = <0x17>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&hdtl_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ eusb6_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb6_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ /* EC @0x5b */
+};
+
+&i2c7 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* Left-side user-adjacent port */
+ typec-mux@8 {
+ compatible = "parade,ps8833", "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+ vdd-supply = <&vreg_rtmr1_1p15>;
+ vdd33-supply = <&vreg_rtmr1_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+ vddar-supply = <&vreg_rtmr1_1p15>;
+ vddat-supply = <&vreg_rtmr1_1p15>;
+ vddio-supply = <&vreg_rtmr1_1p8>;
+
+ reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr1_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss1_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss1_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ASUSTeK, 0B05:0220 */
+ keyboard@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-0 = <&kybd_default>;
+ pinctrl-names = "default";
+
+ wakeup-source;
+ };
+};
+
+&lpass_tlmm {
+ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_3p3>;
+
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_gpios {
+ rtmr0_default: rtmr0-reset-n-active-state {
+ pins = "gpio10";
+ function = "normal";
+ power-source = <1>;
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+
+ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+ pins = "gpio11";
+ function = "normal";
+ power-source = <1>;
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pm8550ve_8_gpios {
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-disable;
+ input-disable;
+ output-enable;
+ drive-push-pull;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
+&pm8550ve_9_gpios {
+ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>;
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <1>;
+ input-disable;
+ output-enable;
+ };
+};
+
+&pmc8380_5_gpios {
+ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>;
+ bias-disable;
+ input-disable;
+ output-enable;
+ };
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&smb2360_0 {
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+ status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&spi10 {
+ status = "disabled";
+
+ /* Unknown device */
+};
+
+&swr0 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Left Speaker */
+ left_spkr: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Right Speaker */
+ right_spkr: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9385 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9385 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <44 4>, /* SPI11, TZ Protected */
+ <90 1>; /* Unknown, TZ Protected */
+
+ cam_indicator_en: cam-indicator-en-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ eusb6_reset_n: eusb6-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
+ hdtl_default: hdtl-default-state {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ rtmr1_default: rtmr1-reset-n-active-state {
+ pins = "gpio176";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tpad_default: tpad-default-state {
+ pins = "gpio3";
+ function = "gpio";
+ bias-disable;
+ };
+
+ usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+ pins = "gpio188";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+ pins = "gpio186";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcn_bt_en: wcn-bt-en-state {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_wlan_en: wcn-wlan-en-state {
+ pins = "gpio117";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+};
+
+&uart21 {
+ compatible = "qcom,geni-debug-uart";
+
+ status = "okay";
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb6_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p9>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p9>;
+
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/ {
+ model = "ASUS Zenbook A14 (UX3407RA)";
+ compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+ "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+ "qcom/x1e80100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+ status = "okay";
+};
aliases {
serial0 = &uart21;
+ serial1 = &uart14;
};
gpio-keys {
regulator-always-on;
regulator-boot-on;
};
+
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
&i2c9 {
clock-frequency = <400000>;
- status = "disabled";
- /* USB3 retimer device @0x4f */
+ status = "okay";
+
+ eusb6_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb6_reset_n>;
+ pinctrl-names = "default";
+ };
};
&i2c17 {
status = "okay";
};
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
&pcie6a {
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
bias-disable;
};
+ eusb6_reset_n: eusb6-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
hall_int_n_default: hall-int-n-state {
pins = "gpio92";
function = "gpio";
drive-strength = <2>;
};
};
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+ pins = "gpio116", "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
};
&uart21 {
&usb_1_ss1_qmpphy_out {
remote-endpoint = <&retimer_ss1_ss_in>;
};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb6_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p9>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p9>;
+
+ status = "okay";
+};
remote-endpoint = <&usb_1_ss1_qmpphy_out>;
};
};
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss1_sbu_mux>;
+ };
+ };
};
};
};
};
};
};
+
+ usb-1-ss1-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss1_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_sbu>;
+ };
+ };
+ };
};
&apps_rsc {
};
};
-&i2c1 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- /* type-c PS8830 Retimer #2 0x8 */
- /* is active on Windows */
-};
-
&i2c3 {
clock-frequency = <400000>;
};
};
-&i2c4 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- /* is active on Windows */
-};
-
&i2c5 {
clock-frequency = <400000>;
status = "okay";
};
};
-&i2c9 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- /* is active on Windows */
-};
-
&lpass_tlmm {
spkr_01_sd_n_active: spkr-01-sd-n-active-state {
pins = "gpio12";
};
-&pmk8550_gpios {
- edp_bl_pwm: edp-bl-pwm-state {
- pins = "gpio5";
- function = "func3";
- };
-};
-
-&pmk8550_pwm {
- status = "okay";
-};
-
&pmc8380_5_gpios {
usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
pins = "gpio8";
};
};
+&pmk8550_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio5";
+ function = "func3";
+ };
+};
+
+&pmk8550_pwm {
+ status = "okay";
+};
+
&qupv3_0 {
status = "okay";
};
};
};
+ usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+ mode-pins {
+ pins = "gpio177";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ output-high;
+ };
+
+ oe-n-pins {
+ pins = "gpio179";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio178";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
wcd_default: wcd-reset-n-active-state {
pins = "gpio191";
function = "gpio";
<GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi4",
"msi5",
"msi6",
- "msi7";
+ "msi7",
+ "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
- thermal-zones {
+ thermal_zones: thermal-zones {
aoss0-thermal {
thermal-sensors = <&tsens0 0>;
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "x1p42100.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+ model = "ASUS Zenbook A14 (UX3407QA)";
+ compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100";
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_wcn_1p9>;
+ vddpcie1p3-supply = <&vreg_wcn_1p9>;
+ vddpcie1p9-supply = <&vreg_wcn_1p9>;
+ vddpmu-supply = <&vreg_wcn_0p95>;
+ vddpmucx-supply = <&vreg_wcn_0p95>;
+ vddpmumx-supply = <&vreg_wcn_0p95>;
+ vddrfa0p95-supply = <&vreg_wcn_0p95>;
+ vddrfa1p3-supply = <&vreg_wcn_1p9>;
+ vddrfa1p9-supply = <&vreg_wcn_1p9>;
+
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn_0p8: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn_0p8";
+ };
+
+ vreg_pmu_aon_0p8: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p8";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p8: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p8";
+ };
+
+ vreg_pmu_btcmx_0p8: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p8";
+ };
+
+ vreg_pmu_pcie_1p8: ldo5 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo6 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_rfa_0p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo8 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo9 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+
+ qcom,calibration-variant = "UX3407Q";
+ };
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+ "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+ "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn6855-bt";
+
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+
+ max-speed = <3000000>;
+ };
+};
/delete-node/ &cpu_pd10;
/delete-node/ &cpu_pd11;
/delete-node/ &pcie3_phy;
+/delete-node/ &thermal_zones;
&gcc {
compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc";
status = "disabled";
};
};
+
+/* While physically present, this controller is left unconfigured and unused */
+&tsens3 {
+ status = "disabled";
+};
+
+/ {
+ thermal-zones {
+ aoss0-thermal {
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-top-thermal {
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-0-btm-thermal {
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-top-thermal {
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-1-btm-thermal {
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-top-thermal {
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-2-btm-thermal {
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-top-thermal {
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-3-btm-thermal {
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-top-thermal {
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-btm-thermal {
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mem-thermal {
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-top-thermal {
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-0-btm-thermal {
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-top-thermal {
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-1-btm-thermal {
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-top-thermal {
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-2-btm-thermal {
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-top-thermal {
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-3-btm-thermal {
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-top-thermal {
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-btm-thermal {
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss2-thermal {
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp0-thermal {
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp1-thermal {
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp2-thermal {
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsp3-thermal {
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-0-thermal {
+ polling-delay-passive = <200>;
+
+ thermal-sensors = <&tsens2 5>;
+
+ cooling-maps {
+ map0 {
+ trip = <&gpuss0_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ gpuss0_alert0: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-1-thermal {
+ polling-delay-passive = <200>;
+
+ thermal-sensors = <&tsens2 6>;
+
+ cooling-maps {
+ map0 {
+ trip = <&gpuss1_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ gpuss1_alert0: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-2-thermal {
+ polling-delay-passive = <200>;
+
+ thermal-sensors = <&tsens2 7>;
+
+ cooling-maps {
+ map0 {
+ trip = <&gpuss2_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ gpuss2_alert0: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss-3-thermal {
+ polling-delay-passive = <200>;
+
+ thermal-sensors = <&tsens2 8>;
+
+ cooling-maps {
+ map0 {
+ trip = <&gpuss3_alert0>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ gpuss3_alert0: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera1-thermal {
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ trip-point1 {
+ temperature = <115000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
+ bootph-all;
status = "okay";
clock-frequency = <400000>;
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
+ bootph-all;
};
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
+ bootph-all;
status = "okay";
ak4613: codec@10 {
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
+ bootph-all;
};
};
};
};
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+
+ /* Please only enable canfd or can0 */
+ /* status = "okay"; */
+};
+
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
+ /* Please only enable canfd or can0 */
status = "okay";
channel0 {
};
&i2c_dvfs {
+ bootph-all;
status = "okay";
clock-frequency = <400000>;
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
+ bootph-all;
};
};
function = "avb";
};
+ can0_pins: can0 {
+ groups = "can0_data";
+ function = "can0";
+ };
+
canfd0_pins: canfd0 {
groups = "canfd0_data";
function = "canfd0";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the Gray Hawk Single board
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ * Copyright (C) 2024-2025 Glider bv
+ */
+/*
+ * [How to use Sound]
+ *
+ * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture
+ * at the same time. You need to switch the direction which is controlled
+ * by the GP0_01 pin via amixer.
+ *
+ * Playback (CN9500)
+ * > amixer set "MUX" "Playback" // for GP0_01
+ * > amixer set "DAC 1" 85%
+ * > aplay xxx.wav
+ *
+ * Capture (CN9501)
+ * > amixer set "MUX" "Capture" // for GP0_01
+ * > amixer set "Mic 1" 80%
+ * > amixer set "ADC 1" on
+ * > amixer set 'ADC 1' 80%
+ * > arecord xxx hoge.wav
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+/ {
+ model = "Renesas Gray Hawk Single board";
+ compatible = "renesas,gray-hawk-single";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ serial0 = &hscif0;
+ serial1 = &hscif2;
+ ethernet0 = &avb0;
+ ethernet1 = &avb1;
+ ethernet2 = &avb2;
+ };
+
+ can_transceiver0: can-phy0 {
+ compatible = "nxp,tjr1443";
+ #phy-cells = <0>;
+ enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ max-bitrate = <5000000>;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ stdout-path = "serial0:921600n8";
+ };
+
+ sn65dsi86_refclk: clk-x6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+
+ key-1 {
+ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW47";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-2 {
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW48";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-3 {
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW49";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-1 {
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ led-2 {
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led-3 {
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@480000000 {
+ device_type = "memory";
+ reg = <0x4 0x80000000 0x1 0x80000000>;
+ };
+
+ pcie_clk: clk-9fgv0841-pci {
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ #clock-cells = <0>;
+ };
+
+ mini-dp-con {
+ compatible = "dp-connector";
+ label = "CN5";
+ type = "mini";
+
+ port {
+ mini_dp_con_in: endpoint {
+ remote-endpoint = <&sn65dsi86_out0>;
+ };
+ };
+ };
+
+ reg_1p2v: regulator-1p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sound_mux: sound-mux {
+ compatible = "simple-audio-mux";
+ mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ state-labels = "Playback", "Capture";
+ };
+
+ sound_card: sound {
+ compatible = "audio-graph-card2";
+ label = "rcar-sound";
+ aux-devs = <&sound_mux>; // for GP0_01
+
+ links = <&rsnd_port>; // AK4619 Audio Codec
+ };
+};
+
+&audio_clkin {
+ clock-frequency = <24576000>;
+};
+
+&avb0 {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&avb0_phy>;
+ tx-internal-delay-ps = <2000>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ avb0_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&avb1 {
+ pinctrl-0 = <&avb1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&avb1_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
+ reset-post-delay-us = <4000>;
+
+ avb1_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&avb2 {
+ pinctrl-0 = <&avb2_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&avb2_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+ reset-post-delay-us = <4000>;
+
+ avb2_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&can_clk {
+ clock-frequency = <40000000>;
+};
+
+&canfd {
+ pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ phys = <&can_transceiver0>;
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96724_out0>;
+ };
+ };
+ };
+};
+
+&csi41 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi41_in: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&max96724_out1>;
+ };
+ };
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ dsi0_out: endpoint {
+ remote-endpoint = <&sn65dsi86_in0>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+};
+
+&du {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&gpio1 {
+ audio-power-hog {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "Audio-Power";
+ };
+};
+
+&hscif0 {
+ pinctrl-0 = <&hscif0_pins>;
+ pinctrl-names = "default";
+ bootph-all;
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&hscif2 {
+ pinctrl-0 = <&hscif2_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ io_expander_a: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ io_expander_b: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ io_expander_c: gpio@22 {
+ compatible = "onnn,pca9654";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "cpu-board";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+
+ eeprom@51 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "breakout-board";
+ reg = <0x51>;
+ pagesize = <8>;
+ };
+
+ eeprom@52 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "csi-dsi-sub-board-id";
+ reg = <0x52>;
+ pagesize = <8>;
+ };
+
+ eeprom@53 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "ethernet-sub-board-id";
+ reg = <0x53>;
+ pagesize = <8>;
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ bridge@2c {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+
+ clocks = <&sn65dsi86_refclk>;
+ clock-names = "refclk";
+
+ interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+ vccio-supply = <®_1p8v>;
+ vpll-supply = <®_1p8v>;
+ vcca-supply = <®_1p2v>;
+ vcc-supply = <®_1p2v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sn65dsi86_in0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sn65dsi86_out0: endpoint {
+ remote-endpoint = <&mini_dp_con_in>;
+ };
+ };
+ };
+ };
+
+ gmsl0: gmsl-deserializer@4e {
+ compatible = "maxim,max96724";
+ reg = <0x4e>;
+ enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96724_out0: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+ };
+
+ gmsl1: gmsl-deserializer@4f {
+ compatible = "maxim,max96724";
+ reg = <0x4f>;
+ enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ max96724_out1: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi41_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ codec@10 {
+ compatible = "asahi-kasei,ak4619";
+ reg = <0x10>;
+
+ clocks = <&rcar_sound>;
+ clock-names = "mclk";
+
+ #sound-dai-cells = <0>;
+ port {
+ ak4619_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
+};
+
+&isp0 {
+ status = "okay";
+};
+
+&isp1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-1 = <&mmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ full-pwr-cycle-in-suspend;
+ status = "okay";
+};
+
+&pcie0_clkref {
+ compatible = "gpio-gate-clock";
+ clocks = <&pcie_clk>;
+ enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ /delete-property/ clock-frequency;
+};
+
+&pciec0 {
+ reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>;
+ pinctrl-names = "default";
+
+ avb0_pins: avb0 {
+ mux {
+ groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+ "avb0_txcrefclk";
+ function = "avb0";
+ };
+
+ pins_mdio {
+ groups = "avb0_mdio";
+ drive-strength = <21>;
+ };
+
+ pins_mii {
+ groups = "avb0_rgmii";
+ drive-strength = <21>;
+ };
+ };
+
+ avb1_pins: avb1 {
+ mux {
+ groups = "avb1_link", "avb1_mdio", "avb1_rgmii",
+ "avb1_txcrefclk";
+ function = "avb1";
+ };
+
+ link {
+ groups = "avb1_link";
+ bias-disable;
+ };
+
+ mdio {
+ groups = "avb1_mdio";
+ drive-strength = <24>;
+ bias-disable;
+ };
+
+ rgmii {
+ groups = "avb1_rgmii";
+ drive-strength = <24>;
+ bias-disable;
+ };
+ };
+
+ avb2_pins: avb2 {
+ mux {
+ groups = "avb2_link", "avb2_mdio", "avb2_rgmii",
+ "avb2_txcrefclk";
+ function = "avb2";
+ };
+
+ link {
+ groups = "avb2_link";
+ bias-disable;
+ };
+
+ mdio {
+ groups = "avb2_mdio";
+ drive-strength = <24>;
+ bias-disable;
+ };
+
+ rgmii {
+ groups = "avb2_rgmii";
+ drive-strength = <24>;
+ bias-disable;
+ };
+ };
+
+ can_clk_pins: can-clk {
+ groups = "can_clk";
+ function = "can_clk";
+ };
+
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
+ canfd1_pins: canfd1 {
+ groups = "canfd1_data";
+ function = "canfd1";
+ };
+
+ hscif0_pins: hscif0 {
+ groups = "hscif0_data", "hscif0_ctrl";
+ function = "hscif0";
+ };
+
+ hscif2_pins: hscif2 {
+ groups = "hscif2_data", "hscif2_ctrl";
+ function = "hscif2";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ i2c3_pins: i2c3 {
+ groups = "i2c3";
+ function = "i2c3";
+ };
+
+ irq0_pins: irq0_pins {
+ groups = "intc_ex_irq0_a";
+ function = "intc_ex";
+ };
+
+ keys_pins: keys {
+ pins = "GP_5_0", "GP_5_1", "GP_5_2";
+ bias-pull-up;
+ };
+
+ mmc_pins: mmc {
+ groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ qspi0_pins: qspi0 {
+ groups = "qspi0_ctrl", "qspi0_data4";
+ function = "qspi0";
+ };
+
+ scif_clk_pins: scif-clk {
+ groups = "scif_clk";
+ function = "scif_clk";
+ };
+
+ scif_clk2_pins: scif-clk2 {
+ groups = "scif_clk2";
+ function = "scif_clk2";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clkin", "audio_clkout";
+ function = "audio_clk";
+ };
+
+ sound_pins: sound {
+ groups = "ssi_ctrl", "ssi_data";
+ function = "ssi";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ /* audio_clkout */
+ clock-frequency = <12288000>;
+
+ ports {
+ rsnd_port: port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&ak4619_endpoint>;
+ bitclock-master;
+ frame-master;
+
+ /* see above [How to use Sound] */
+ playback = <&ssi0>;
+ capture = <&ssi0>;
+ };
+ };
+ };
+};
+
+&rpc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fs512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ reg = <0x0 0x1200000>;
+ read-only;
+ };
+ user@1200000 {
+ reg = <0x1200000 0x2e00000>;
+ };
+ };
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <24000000>;
+};
+
+&scif_clk2 {
+ clock-frequency = <24000000>;
+};
+
+&vin00 {
+ status = "okay";
+};
+
+&vin01 {
+ status = "okay";
+};
+
+&vin02 {
+ status = "okay";
+};
+
+&vin03 {
+ status = "okay";
+};
+
+&vin04 {
+ status = "okay";
+};
+
+&vin05 {
+ status = "okay";
+};
+
+&vin06 {
+ status = "okay";
+};
+
+&vin07 {
+ status = "okay";
+};
+
+&vin08 {
+ status = "okay";
+};
+
+&vin09 {
+ status = "okay";
+};
+
+&vin10 {
+ status = "okay";
+};
+
+&vin11 {
+ status = "okay";
+};
+
+&vin12 {
+ status = "okay";
+};
+
+&vin13 {
+ status = "okay";
+};
+
+&vin14 {
+ status = "okay";
+};
+
+&vin15 {
+ status = "okay";
+};
<0 0 0 4 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
snps,enable-cdm-check;
status = "disabled";
+
+ /* PCIe bridge, Root Port */
+ pciec0_rp: pci@0,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ ranges;
+ };
};
pciec1: pcie@e65d8000 {
<0 0 0 4 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
snps,enable-cdm-check;
status = "disabled";
+
+ /* PCIe bridge, Root Port */
+ pciec1_rp: pci@0,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ ranges;
+ };
};
pciec0_ep: pcie-ep@e65d0000 {
};
};
+ /* Page 26 / PCIe.0/1 CLK */
+ pcie_refclk: clk-x8 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
reg_1p2v: regulator-1p2v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.2V";
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
+
+ /* Page 26 / PCIe.0/1 CLK */
+ pcie_clk: clk@68 {
+ compatible = "renesas,9fgv0441";
+ reg = <0x68>;
+ clocks = <&pcie_refclk>;
+ #clock-cells = <1>;
+ };
};
i2c0_mux3: i2c@3 {
/* Page 26 / 2230 Key M M.2 */
&pcie0_clkref {
- clock-frequency = <100000000>;
+ status = "disabled";
};
&pciec0 {
+ clocks = <&cpg CPG_MOD 624>, <&pcie_clk 0>;
reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
+&pciec0_rp {
+ clocks = <&pcie_clk 1>;
+ vpcie3v3-supply = <®_3p3v>;
+};
+
/* Page 25 / PCIe to USB */
&pcie1_clkref {
- clock-frequency = <100000000>;
+ status = "disabled";
};
&pciec1 {
+ clocks = <&cpg CPG_MOD 625>, <&pcie_clk 2>;
/* uPD720201 is PCIe Gen2 x1 device */
num-lanes = <1>;
reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
status = "okay";
};
+&pciec1_rp {
+ clocks = <&pcie_clk 3>;
+ vpcie3v3-supply = <®_3p3v>;
+};
+
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
};
};
-/* Page 30 / Audio_Codec */
-&rcar_sound {
- pinctrl-0 = <&sound_clk_pins>;
- pinctrl-names = "default";
-
- /* It is used for ADG output as DA7212_MCLK */
-
- /* audio_clkout */
- clock-frequency = <12288000>; /* 48 kHz groups */
-
- status = "okay";
-};
-
/* Page 31 / FAN */
&pwm0 {
pinctrl-0 = <&pwm0_pins>;
status = "okay";
};
+/* Page 30 / Audio_Codec */
+&rcar_sound {
+ pinctrl-0 = <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* It is used for ADG output as DA7212_MCLK */
+
+ /* audio_clkout */
+ clock-frequency = <12288000>; /* 48 kHz groups */
+
+ status = "okay";
+};
+
/* Page 16 / QSPI_FLASH */
&rpc {
pinctrl-0 = <&qspi0_pins>;
* Copyright (C) 2023 Renesas Electronics Corp.
* Copyright (C) 2024 Glider bv
*/
-/*
- * [How to use Sound]
- *
- * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture
- * at the same time. You need to switch the direction which is controlled
- * by the GP0_01 pin via amixer.
- *
- * Playback (CN9500)
- * > amixer set "MUX" "Playback" // for GP0_01
- * > amixer set "DAC 1" 85%
- * > aplay xxx.wav
- *
- * Capture (CN9501)
- * > amixer set "MUX" "Capture" // for GP0_01
- * > amixer set "Mic 1" 80%
- * > amixer set "ADC 1" on
- * > amixer set 'ADC 1' 80%
- * > arecord xxx hoge.wav
- */
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/video-interfaces.h>
-
#include "r8a779h0.dtsi"
+#include "gray-hawk-single.dtsi"
/ {
model = "Renesas Gray Hawk Single board based on r8a779h0";
compatible = "renesas,gray-hawk-single", "renesas,r8a779h0";
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- serial0 = &hscif0;
- serial1 = &hscif2;
- ethernet0 = &avb0;
- ethernet1 = &avb1;
- ethernet2 = &avb2;
- };
-
- can_transceiver0: can-phy0 {
- compatible = "nxp,tjr1443";
- #phy-cells = <0>;
- enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- max-bitrate = <5000000>;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:921600n8";
- };
-
- sn65dsi86_refclk: clk-x6 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <38400000>;
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&keys_pins>;
- pinctrl-names = "default";
-
- key-1 {
- gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_1>;
- label = "SW47";
- wakeup-source;
- debounce-interval = <20>;
- };
-
- key-2 {
- gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_2>;
- label = "SW48";
- wakeup-source;
- debounce-interval = <20>;
- };
-
- key-3 {
- gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_3>;
- label = "SW49";
- wakeup-source;
- debounce-interval = <20>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-1 {
- gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <1>;
- };
-
- led-2 {
- gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <2>;
- };
-
- led-3 {
- gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <3>;
- };
- };
-
- memory@48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x78000000>;
- };
-
- memory@480000000 {
- device_type = "memory";
- reg = <0x4 0x80000000 0x1 0x80000000>;
- };
-
- pcie_clk: clk-9fgv0841-pci {
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- #clock-cells = <0>;
- };
-
- mini-dp-con {
- compatible = "dp-connector";
- label = "CN5";
- type = "mini";
-
- port {
- mini_dp_con_in: endpoint {
- remote-endpoint = <&sn65dsi86_out0>;
- };
- };
- };
-
- reg_1p2v: regulator-1p2v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sound_mux: sound-mux {
- compatible = "simple-audio-mux";
- mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- state-labels = "Playback", "Capture";
- };
-
- sound_card: sound {
- compatible = "audio-graph-card2";
- label = "rcar-sound";
- aux-devs = <&sound_mux>; // for GP0_01
-
- links = <&rsnd_port>; // AK4619 Audio Codec
- };
-};
-
-&audio_clkin {
- clock-frequency = <24576000>;
-};
-
-&avb0 {
- pinctrl-0 = <&avb0_pins>;
- pinctrl-names = "default";
- phy-handle = <&avb0_phy>;
- tx-internal-delay-ps = <2000>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- avb0_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id0022.1622",
- "ethernet-phy-ieee802.3-c22";
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&avb1 {
- pinctrl-0 = <&avb1_pins>;
- pinctrl-names = "default";
- phy-handle = <&avb1_phy>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
- reset-post-delay-us = <4000>;
-
- avb1_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-};
-
-&avb2 {
- pinctrl-0 = <&avb2_pins>;
- pinctrl-names = "default";
- phy-handle = <&avb2_phy>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
- reset-post-delay-us = <4000>;
-
- avb2_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0>;
- interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-};
-
-&can_clk {
- clock-frequency = <40000000>;
-};
-
-&canfd {
- pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- channel0 {
- status = "okay";
- phys = <&can_transceiver0>;
- };
-
- channel1 {
- status = "okay";
- };
-};
-
-&csi40 {
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- csi40_in: endpoint {
- bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&max96724_out0>;
- };
- };
- };
-};
-
-&csi41 {
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- csi41_in: endpoint {
- bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&max96724_out1>;
- };
- };
- };
-};
-
-&dsi0 {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
-
- dsi0_out: endpoint {
- remote-endpoint = <&sn65dsi86_in0>;
- data-lanes = <1 2 3 4>;
- };
- };
- };
-};
-
-&du {
- status = "okay";
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&gpio1 {
- audio-power-hog {
- gpio-hog;
- gpios = <8 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "Audio-Power";
- };
-};
-
-&hscif0 {
- pinctrl-0 = <&hscif0_pins>;
- pinctrl-names = "default";
- bootph-all;
-
- uart-has-rtscts;
- status = "okay";
-};
-
-&hscif2 {
- pinctrl-0 = <&hscif2_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- io_expander_a: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- io_expander_b: gpio@21 {
- compatible = "onnn,pca9654";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- io_expander_c: gpio@22 {
- compatible = "onnn,pca9654";
- reg = <0x22>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- eeprom@50 {
- compatible = "rohm,br24g01", "atmel,24c01";
- label = "cpu-board";
- reg = <0x50>;
- pagesize = <8>;
- };
-
- eeprom@51 {
- compatible = "rohm,br24g01", "atmel,24c01";
- label = "breakout-board";
- reg = <0x51>;
- pagesize = <8>;
- };
-
- eeprom@52 {
- compatible = "rohm,br24g01", "atmel,24c01";
- label = "csi-dsi-sub-board-id";
- reg = <0x52>;
- pagesize = <8>;
- };
-
- eeprom@53 {
- compatible = "rohm,br24g01", "atmel,24c01";
- label = "ethernet-sub-board-id";
- reg = <0x53>;
- pagesize = <8>;
- };
-};
-
-&i2c1 {
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- bridge@2c {
- pinctrl-0 = <&irq0_pins>;
- pinctrl-names = "default";
-
- compatible = "ti,sn65dsi86";
- reg = <0x2c>;
-
- clocks = <&sn65dsi86_refclk>;
- clock-names = "refclk";
-
- interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;
-
- enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-
- vccio-supply = <®_1p8v>;
- vpll-supply = <®_1p8v>;
- vcca-supply = <®_1p2v>;
- vcc-supply = <®_1p2v>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- sn65dsi86_in0: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- sn65dsi86_out0: endpoint {
- remote-endpoint = <&mini_dp_con_in>;
- };
- };
- };
- };
-
- gmsl0: gmsl-deserializer@4e {
- compatible = "maxim,max96724";
- reg = <0x4e>;
- enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@4 {
- reg = <4>;
- max96724_out0: endpoint {
- bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
- };
- };
- };
- };
-
- gmsl1: gmsl-deserializer@4f {
- compatible = "maxim,max96724";
- reg = <0x4f>;
- enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@4 {
- reg = <4>;
- max96724_out1: endpoint {
- bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi41_in>;
- };
- };
- };
- };
-};
-
-&i2c3 {
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- codec@10 {
- compatible = "asahi-kasei,ak4619";
- reg = <0x10>;
-
- clocks = <&rcar_sound>;
- clock-names = "mclk";
-
- #sound-dai-cells = <0>;
- port {
- ak4619_endpoint: endpoint {
- remote-endpoint = <&rsnd_endpoint>;
- };
- };
- };
-};
-
-&isp0 {
- status = "okay";
-};
-
-&isp1 {
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-0 = <&mmc_pins>;
- pinctrl-1 = <&mmc_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- bus-width = <8>;
- no-sd;
- no-sdio;
- non-removable;
- full-pwr-cycle-in-suspend;
- status = "okay";
-};
-
-&pcie0_clkref {
- compatible = "gpio-gate-clock";
- clocks = <&pcie_clk>;
- enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
- /delete-property/ clock-frequency;
-};
-
-&pciec0 {
- reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>;
- pinctrl-names = "default";
-
- avb0_pins: avb0 {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
- "avb0_txcrefclk";
- function = "avb0";
- };
-
- pins_mdio {
- groups = "avb0_mdio";
- drive-strength = <21>;
- };
-
- pins_mii {
- groups = "avb0_rgmii";
- drive-strength = <21>;
- };
- };
-
- avb1_pins: avb1 {
- mux {
- groups = "avb1_link", "avb1_mdio", "avb1_rgmii",
- "avb1_txcrefclk";
- function = "avb1";
- };
-
- link {
- groups = "avb1_link";
- bias-disable;
- };
-
- mdio {
- groups = "avb1_mdio";
- drive-strength = <24>;
- bias-disable;
- };
-
- rgmii {
- groups = "avb1_rgmii";
- drive-strength = <24>;
- bias-disable;
- };
- };
-
- avb2_pins: avb2 {
- mux {
- groups = "avb2_link", "avb2_mdio", "avb2_rgmii",
- "avb2_txcrefclk";
- function = "avb2";
- };
-
- link {
- groups = "avb2_link";
- bias-disable;
- };
-
- mdio {
- groups = "avb2_mdio";
- drive-strength = <24>;
- bias-disable;
- };
-
- rgmii {
- groups = "avb2_rgmii";
- drive-strength = <24>;
- bias-disable;
- };
- };
-
- can_clk_pins: can-clk {
- groups = "can_clk";
- function = "can_clk";
- };
-
- canfd0_pins: canfd0 {
- groups = "canfd0_data";
- function = "canfd0";
- };
-
- canfd1_pins: canfd1 {
- groups = "canfd1_data";
- function = "canfd1";
- };
-
- hscif0_pins: hscif0 {
- groups = "hscif0_data", "hscif0_ctrl";
- function = "hscif0";
- };
-
- hscif2_pins: hscif2 {
- groups = "hscif2_data", "hscif2_ctrl";
- function = "hscif2";
- };
-
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
- };
-
- i2c3_pins: i2c3 {
- groups = "i2c3";
- function = "i2c3";
- };
-
- irq0_pins: irq0_pins {
- groups = "intc_ex_irq0_a";
- function = "intc_ex";
- };
-
- keys_pins: keys {
- pins = "GP_5_0", "GP_5_1", "GP_5_2";
- bias-pull-up;
- };
-
- mmc_pins: mmc {
- groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
- function = "mmc";
- power-source = <1800>;
- };
-
- qspi0_pins: qspi0 {
- groups = "qspi0_ctrl", "qspi0_data4";
- function = "qspi0";
- };
-
- scif_clk_pins: scif-clk {
- groups = "scif_clk";
- function = "scif_clk";
- };
-
- scif_clk2_pins: scif-clk2 {
- groups = "scif_clk2";
- function = "scif_clk2";
- };
-
- sound_clk_pins: sound_clk {
- groups = "audio_clkin", "audio_clkout";
- function = "audio_clk";
- };
-
- sound_pins: sound {
- groups = "ssi_ctrl", "ssi_data";
- function = "ssi";
- };
-};
-
-&rcar_sound {
- pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- /* audio_clkout */
- clock-frequency = <12288000>;
-
- ports {
- rsnd_port: port {
- rsnd_endpoint: endpoint {
- remote-endpoint = <&ak4619_endpoint>;
- bitclock-master;
- frame-master;
-
- /* see above [How to use Sound] */
- playback = <&ssi0>;
- capture = <&ssi0>;
- };
- };
- };
-};
-
-&rpc {
- pinctrl-0 = <&qspi0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash@0 {
- compatible = "spansion,s25fs512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
- spi-rx-bus-width = <4>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boot@0 {
- reg = <0x0 0x1200000>;
- read-only;
- };
- user@1200000 {
- reg = <0x1200000 0x2e00000>;
- };
- };
- };
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <24000000>;
-};
-
-&scif_clk2 {
- clock-frequency = <24000000>;
-};
-
-&vin00 {
- status = "okay";
-};
-
-&vin01 {
- status = "okay";
-};
-
-&vin02 {
- status = "okay";
-};
-
-&vin03 {
- status = "okay";
-};
-
-&vin04 {
- status = "okay";
-};
-
-&vin05 {
- status = "okay";
-};
-
-&vin06 {
- status = "okay";
-};
-
-&vin07 {
- status = "okay";
-};
-
-&vin08 {
- status = "okay";
-};
-
-&vin09 {
- status = "okay";
-};
-
-&vin10 {
- status = "okay";
-};
-
-&vin11 {
- status = "okay";
-};
-
-&vin12 {
- status = "okay";
-};
-
-&vin13 {
- status = "okay";
-};
-
-&vin14 {
- status = "okay";
-};
-
-&vin15 {
- status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4M-7 Gray Hawk Single board
+ *
+ * Copyright (C) 2025 Glider bv
+ */
+
+/dts-v1/;
+
+#include "r8a779h2.dtsi"
+#include "gray-hawk-single.dtsi"
+
+/ {
+ model = "Renesas Gray Hawk Single board based on r8a779h2";
+ compatible = "renesas,gray-hawk-single", "renesas,r8a779h2",
+ "renesas,r8a779h0";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4M-7 (R8A779H2) SoC
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#include "r8a779h0.dtsi"
+
+/ {
+ compatible = "renesas,r8a779h2", "renesas,r8a779h0";
+};
resets = <&cpg 0x30>;
};
+ xspi: spi@11030000 {
+ compatible = "renesas,r9a09g047-xspi";
+ reg = <0 0x11030000 0 0x10000>,
+ <0 0x20000000 0 0x10000000>;
+ reg-names = "regs", "dirmap";
+ interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "pulse", "err_pulse";
+ clocks = <&cpg CPG_MOD 0x9f>,
+ <&cpg CPG_MOD 0xa0>,
+ <&cpg CPG_CORE R9A09G047_SPI_CLK_SPI>,
+ <&cpg CPG_MOD 0xa1>;
+ clock-names = "ahb", "axi", "spi", "spix2";
+ resets = <&cpg 0xa3>, <&cpg 0xa4>;
+ reset-names = "hresetn", "aresetn";
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
scif0: serial@11c01400 {
compatible = "renesas,scif-r9a09g047", "renesas,scif-r9a09g057";
reg = <0 0x11c01400 0 0x400>;
status = "disabled";
};
};
+
+ eth0: ethernet@15c30000 {
+ compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth",
+ "snps,dwmac-5.20";
+ reg = <0 0x15c30000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+ <&cpg CPG_CORE R9A09G047_GBETH_0_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+ <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180";
+ interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3";
+ resets = <&cpg 0xb0>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup0>;
+ snps,mtl-tx-config = <&mtl_tx_setup0>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup0: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup0: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+
+ eth1: ethernet@15c40000 {
+ compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth",
+ "snps,dwmac-5.20";
+ reg = <0 0x15c40000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+ <&cpg CPG_CORE R9A09G047_GBETH_1_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+ <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180";
+ interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3";
+ resets = <&cpg 0xb1>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+
+ cru: video@16000000 {
+ compatible = "renesas,r9a09g047-cru";
+ reg = <0 0x16000000 0 0x400>;
+ clocks = <&cpg CPG_MOD 0xd3>,
+ <&cpg CPG_MOD 0xd4>,
+ <&cpg CPG_MOD 0xd2>;
+ clock-names = "video", "apb", "axi";
+ interrupts = <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 840 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 841 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "image_conv", "axi_mst_err",
+ "vd_addr_wend", "sd_addr_wend",
+ "vsd_addr_wend";
+ resets = <&cpg 0xc5>, <&cpg 0xc6>;
+ reset-names = "presetn", "aresetn";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+ crucsi2: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&csi2cru>;
+ };
+ };
+ };
+ };
+
+ csi2: csi2@16000400 {
+ compatible = "renesas,r9a09g047-csi2", "renesas,r9a09g057-csi2";
+ reg = <0 0x16000400 0 0xc00>;
+ interrupts = <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xd3>, <&cpg CPG_MOD 0xd4>;
+ clock-names = "video", "apb";
+ resets = <&cpg 0xc5>, <&cpg 0xc7>;
+ reset-names = "presetn", "cmn-rstb";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ csi2cru: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&crucsi2>;
+ };
+ };
+ };
+ };
+ };
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,lpi_en;
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <16 8 4 0 0 0 0>;
};
timer {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G3E SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+ enable-gpios = <&pinctrl RZG3E_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pinctrl RZG3E_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+};
/dts-v1/;
/* Switch selection settings */
+#define SW_LCD_EN 0
#define SW_GPIO8_CAN0_STB 0
#define SW_GPIO9_CAN1_STB 0
#define SW_LCD_EN 0
#define SW_SD0_DEV_SEL 0
#define SW_SDIO_M2E 0
+#define PMOD_GPIO4 0
+#define PMOD_GPIO6 0
+#define PMOD_GPIO7 0
+
+#define KEY_1_GPIO RZG3E_GPIO(3, 1)
+#define KEY_2_GPIO RZG3E_GPIO(8, 4)
+#define KEY_3_GPIO RZG3E_GPIO(8, 5)
+
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h>
#include "r9a09g047e57.dtsi"
#include "rzg3e-smarc-som.dtsi"
};
#endif
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+};
+
+&keys {
+ key-sleep {
+ pinctrl-0 = <&nmi_pins>;
+ pinctrl-names = "default";
+
+ interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>;
+ linux,code = <KEY_SLEEP>;
+ label = "SLEEP";
+ debounce-interval = <20>;
+ };
+#if PMOD_GPIO4
+ /delete-node/ key-1;
+#endif
+
+#if SW_LCD_EN || PMOD_GPIO6
+ /delete-node/ key-2;
+#endif
+
+#if SW_LCD_EN || PMOD_GPIO7
+ /delete-node/ key-3;
+#endif
+};
+
&pinctrl {
canfd_pins: canfd {
can1_pins: can1 {
};
};
+ i2c0_pins: i2c0 {
+ pinmux = <RZG3E_PORT_PINMUX(D, 4, 4)>, /* SCL0 */
+ <RZG3E_PORT_PINMUX(D, 5, 4)>; /* SDA0 */
+ };
+
+ nmi_pins: nmi {
+ pinmux = <RZG3E_PORT_PINMUX(S, 0, 0)>; /* NMI */
+ };
+
scif_pins: scif {
pins = "SCIF_TXD", "SCIF_RXD";
renesas,output-impedance = <1>;
};
};
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-630000000 {
+ opp-hz = /bits/ 64 <630000000>;
+ opp-microvolt = <800000>;
+ };
+
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-microvolt = <800000>;
+ };
+
+ opp-157500000 {
+ opp-hz = /bits/ 64 <157500000>;
+ opp-microvolt = <800000>;
+ };
+
+ opp-78750000 {
+ opp-hz = /bits/ 64 <78750000>;
+ opp-microvolt = <800000>;
+ };
+
+ opp-19687500 {
+ opp-hz = /bits/ 64 <19687500>;
+ opp-microvolt = <800000>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
resets = <&cpg 0x30>;
};
+ xspi: spi@11030000 {
+ compatible = "renesas,r9a09g056-xspi", "renesas,r9a09g047-xspi";
+ reg = <0 0x11030000 0 0x10000>,
+ <0 0x20000000 0 0x10000000>;
+ reg-names = "regs", "dirmap";
+ interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "pulse", "err_pulse";
+ clocks = <&cpg CPG_MOD 0x9f>,
+ <&cpg CPG_MOD 0xa0>,
+ <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>,
+ <&cpg CPG_MOD 0xa1>;
+ clock-names = "ahb", "axi", "spi", "spix2";
+ resets = <&cpg 0xa3>, <&cpg 0xa4>;
+ reset-names = "hresetn", "aresetn";
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ostm0: timer@11800000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x11800000 0x0 0x1000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x43>;
+ resets = <&cpg 0x6d>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm1: timer@11801000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x11801000 0x0 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x44>;
+ resets = <&cpg 0x6e>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm2: timer@14000000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x14000000 0x0 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x45>;
+ resets = <&cpg 0x6f>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm3: timer@14001000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x14001000 0x0 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x46>;
+ resets = <&cpg 0x70>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm4: timer@12c00000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x12c00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x47>;
+ resets = <&cpg 0x71>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm5: timer@12c01000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x12c01000 0x0 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x48>;
+ resets = <&cpg 0x72>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm6: timer@12c02000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x12c02000 0x0 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x49>;
+ resets = <&cpg 0x73>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm7: timer@12c03000 {
+ compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
+ reg = <0x0 0x12c03000 0x0 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD 0x4a>;
+ resets = <&cpg 0x74>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@11c00400 {
+ compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+ reg = <0 0x11c00400 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x75>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt1: watchdog@14400000 {
+ compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+ reg = <0 0x14400000 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x76>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@13000000 {
+ compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+ reg = <0 0x13000000 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x77>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt3: watchdog@13000400 {
+ compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
+ reg = <0 0x13000400 0 0x400>;
+ clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>;
+ clock-names = "pclk", "oscclk";
+ resets = <&cpg 0x78>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
scif: serial@11c01400 {
compatible = "renesas,scif-r9a09g056",
"renesas,scif-r9a09g057";
status = "disabled";
};
+ i2c0: i2c@14400400 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14400400 0 0x400>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 507 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 506 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x94>;
+ resets = <&cpg 0x98>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@14400800 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14400800 0 0x400>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 508 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x95>;
+ resets = <&cpg 0x99>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@14400c00 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14400c00 0 0x400>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 511 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x96>;
+ resets = <&cpg 0x9a>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@14401000 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14401000 0 0x400>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 512 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x97>;
+ resets = <&cpg 0x9b>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@14401400 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14401400 0 0x400>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 515 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x98>;
+ resets = <&cpg 0x9c>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@14401800 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14401800 0 0x400>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 517 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 516 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x99>;
+ resets = <&cpg 0x9d>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@14401c00 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14401c00 0 0x400>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 519 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x9a>;
+ resets = <&cpg 0x9e>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@14402000 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x14402000 0 0x400>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 521 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 520 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x9b>;
+ resets = <&cpg 0x9f>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@11c01000 {
+ compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
+ reg = <0 0x11c01000 0 0x400>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 523 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 522 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD 0x93>;
+ resets = <&cpg 0xa0>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ gpu: gpu@14850000 {
+ compatible = "renesas,r9a09g056-mali",
+ "arm,mali-bifrost";
+ reg = <0x0 0x14850000 0x0 0x10000>;
+ interrupts = <GIC_SPI 884 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 883 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu", "event";
+ clocks = <&cpg CPG_MOD 0xf0>,
+ <&cpg CPG_MOD 0xf1>,
+ <&cpg CPG_MOD 0xf2>;
+ clock-names = "gpu", "bus", "bus_ace";
+ resets = <&cpg 0xdd>,
+ <&cpg 0xde>,
+ <&cpg 0xdf>;
+ reset-names = "rst", "axi_rst", "ace_rst";
+ power-domains = <&cpg>;
+ operating-points-v2 = <&gpu_opp_table>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@14900000 {
compatible = "arm,gic-v3";
reg = <0x0 0x14900000 0 0x20000>,
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
+ ohci0: usb@15800000 {
+ compatible = "generic-ohci";
+ reg = <0 0x15800000 0 0x100>;
+ interrupts = <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+ resets = <&usb20phyrst>, <&cpg 0xac>;
+ phys = <&usb2_phy0 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15800100 {
+ compatible = "generic-ehci";
+ reg = <0 0x15800100 0 0x100>;
+ interrupts = <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+ resets = <&usb20phyrst>, <&cpg 0xac>;
+ phys = <&usb2_phy0 2>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@15800200 {
+ compatible = "renesas,usb2-phy-r9a09g056", "renesas,usb2-phy-r9a09g057";
+ reg = <0 0x15800200 0 0x700>;
+ interrupts = <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>,
+ <&cpg CPG_CORE R9A09G056_USB2_0_CLK_CORE0>;
+ clock-names = "fck", "usb_x1";
+ resets = <&usb20phyrst>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ hsusb: usb@15820000 {
+ compatible = "renesas,usbhs-r9a09g056",
+ "renesas,rzg2l-usbhs";
+ reg = <0 0x15820000 0 0x10000>;
+ interrupts = <GIC_SPI 751 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>;
+ resets = <&usb20phyrst>,
+ <&cpg 0xae>;
+ phys = <&usb2_phy0 3>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb20phyrst: usb20phy-reset@15830000 {
+ compatible = "renesas,r9a09g056-usb2phy-reset",
+ "renesas,r9a09g057-usb2phy-reset";
+ reg = <0 0x15830000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0xb6>;
+ resets = <&cpg 0xaf>;
+ power-domains = <&cpg>;
+ #reset-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: mmc@15c00000 {
compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
reg = <0x0 0x15c00000 0 0x10000>;
status = "disabled";
};
};
+
+ eth0: ethernet@15c30000 {
+ compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth",
+ "snps,dwmac-5.20";
+ reg = <0 0x15c30000 0 0x10000>;
+ interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3";
+ clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+ <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+ <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180";
+ resets = <&cpg 0xb0>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup0>;
+ snps,mtl-tx-config = <&mtl_tx_setup0>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup0: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup0: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+
+ eth1: ethernet@15c40000 {
+ compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth",
+ "snps,dwmac-5.20";
+ reg = <0 0x15c40000 0 0x10000>;
+ interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3";
+ clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+ <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+ <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180";
+ resets = <&cpg 0xb1>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+ };
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,lpi_en;
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <16 8 4 0 0 0 0>;
};
timer {
compatible = "renesas,rzv2n-evk", "renesas,r9a09g056n48", "renesas,r9a09g056";
aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
mmc1 = &sdhi1;
serial0 = &scif;
};
reg = <0x0 0x48000000 0x1 0xf8000000>;
};
+ reg_0p8v: regulator-0p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-0.8V";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
gpios-states = <0>;
states = <3300000 0>, <1800000 1>;
};
+
+ /* 32.768kHz crystal */
+ x6: x6-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
&audio_extal_clk {
clock-frequency = <22579200>;
};
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-0 = <ð0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+ð1 {
+ pinctrl-0 = <ð1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <®_0p8v>;
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c7 {
+ pinctrl-0 = <&i2c7_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c8 {
+ pinctrl-0 = <&i2c8_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+
+ raa215300: pmic@12 {
+ compatible = "renesas,raa215300";
+ reg = <0x12>, <0x6f>;
+ reg-names = "main", "rtc";
+ clocks = <&x6>;
+ clock-names = "xin";
+ };
+};
+
+&mdio0 {
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ rxc-skew-psec = <0>;
+ txc-skew-psec = <0>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+&mdio1 {
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ rxc-skew-psec = <0>;
+ txc-skew-psec = <0>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ostm0 {
+ status = "okay";
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+&ostm2 {
+ status = "okay";
+};
+
+&ostm3 {
+ status = "okay";
+};
+
+&ostm4 {
+ status = "okay";
+};
+
+&ostm5 {
+ status = "okay";
+};
+
+&ostm6 {
+ status = "okay";
+};
+
+&ostm7 {
+ status = "okay";
+};
+
&pinctrl {
+ eth0_pins: eth0 {
+ pins = "ET0_TXC_TXCLK";
+ output-enable;
+ };
+
+ eth1_pins: eth1 {
+ pins = "ET1_TXC_TXCLK";
+ output-enable;
+ };
+
+ i2c0_pins: i2c0 {
+ pinmux = <RZV2N_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */
+ <RZV2N_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */
+ };
+
+ i2c1_pins: i2c1 {
+ pinmux = <RZV2N_PORT_PINMUX(3, 2, 1)>, /* I2C1_SDA */
+ <RZV2N_PORT_PINMUX(3, 3, 1)>; /* I2C1_SCL */
+ };
+
+ i2c2_pins: i2c2 {
+ pinmux = <RZV2N_PORT_PINMUX(2, 0, 4)>, /* I2C2_SDA */
+ <RZV2N_PORT_PINMUX(2, 1, 4)>; /* I2C2_SCL */
+ };
+
+ i2c3_pins: i2c3 {
+ pinmux = <RZV2N_PORT_PINMUX(3, 6, 1)>, /* I2C3_SDA */
+ <RZV2N_PORT_PINMUX(3, 7, 1)>; /* I2C3_SCL */
+ };
+
+ i2c6_pins: i2c6 {
+ pinmux = <RZV2N_PORT_PINMUX(4, 4, 1)>, /* I2C6_SDA */
+ <RZV2N_PORT_PINMUX(4, 5, 1)>; /* I2C6_SCL */
+ /* There are no pull-up resistors on the EVK, so enable the internal pull-up */
+ bias-pull-up;
+ };
+
+ i2c7_pins: i2c7 {
+ pinmux = <RZV2N_PORT_PINMUX(4, 6, 1)>, /* I2C7_SDA */
+ <RZV2N_PORT_PINMUX(4, 7, 1)>; /* I2C7_SCL */
+ /* There are no pull-up resistors on the EVK, so enable the internal pull-up */
+ bias-pull-up;
+ };
+
+ i2c8_pins: i2c8 {
+ pinmux = <RZV2N_PORT_PINMUX(0, 6, 1)>, /* I2C8_SDA */
+ <RZV2N_PORT_PINMUX(0, 7, 1)>; /* I2C8_SCL */
+ };
+
scif_pins: scif {
pins = "SCIF_TXD", "SCIF_RXD";
renesas,output-impedance = <1>;
slew-rate = <0>;
};
};
+
+ usb20_pins: usb20 {
+ ovc {
+ pinmux = <RZV2N_PORT_PINMUX(9, 6, 14)>; /* OVC */
+ };
+
+ vbus {
+ pinmux = <RZV2N_PORT_PINMUX(9, 5, 14)>; /* VBUS */
+ };
+ };
+
+ xspi_pins: xspi0 {
+ ctrl {
+ pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP";
+ output-enable;
+ };
+
+ io {
+ pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3";
+ renesas,output-impedance = <3>;
+ };
+ };
};
&qextal_clk {
sd-uhs-sdr104;
status = "okay";
};
+
+&usb20phyrst {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb20_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+};
+
+&xspi {
+ pinctrl-0 = <&xspi_pins>;
+ pinctrl-names = "default";
+ /*
+ * MT25QU512ABB8E12 flash chip is capable of running at 166MHz
+ * clock frequency. Set the clock frequency to the maximum 133MHz
+ * supported by the RZ/V2N SoC.
+ */
+ assigned-clocks = <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>;
+ assigned-clock-rates = <133333334>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ vcc-supply = <®_1p8v>;
+ m25p,fast-read;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0x00000000 0x00060000>;
+ };
+
+ partition@60000 {
+ label = "fip";
+ reg = <0x00060000 0x1fa0000>;
+ };
+
+ partition@2000000 {
+ label = "user";
+ reg = <0x2000000 0x2000000>;
+ };
+ };
+ };
+};
resets = <&cpg 0x30>;
};
+ xspi: spi@11030000 {
+ compatible = "renesas,r9a09g057-xspi", "renesas,r9a09g047-xspi";
+ reg = <0 0x11030000 0 0x10000>,
+ <0 0x20000000 0 0x10000000>;
+ reg-names = "regs", "dirmap";
+ interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "pulse", "err_pulse";
+ clocks = <&cpg CPG_MOD 0x9f>,
+ <&cpg CPG_MOD 0xa0>,
+ <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>,
+ <&cpg CPG_MOD 0xa1>;
+ clock-names = "ahb", "axi", "spi", "spix2";
+ resets = <&cpg 0xa3>, <&cpg 0xa4>;
+ reset-names = "hresetn", "aresetn";
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@11400000 {
compatible = "renesas,r9a09g057-dmac";
reg = <0 0x11400000 0 0x10000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
+ ohci0: usb@15800000 {
+ compatible = "generic-ohci";
+ reg = <0 0x15800000 0 0x100>;
+ interrupts = <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+ resets = <&usb20phyrst>, <&cpg 0xac>;
+ phys = <&usb2_phy0 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci1: usb@15810000 {
+ compatible = "generic-ohci";
+ reg = <0 0x15810000 0 0x100>;
+ interrupts = <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>;
+ resets = <&usb21phyrst>, <&cpg 0xad>;
+ phys = <&usb2_phy1 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15800100 {
+ compatible = "generic-ehci";
+ reg = <0 0x15800100 0 0x100>;
+ interrupts = <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
+ resets = <&usb20phyrst>, <&cpg 0xac>;
+ phys = <&usb2_phy0 2>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci1: usb@15810100 {
+ compatible = "generic-ehci";
+ reg = <0 0x15810100 0 0x100>;
+ interrupts = <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>;
+ resets = <&usb21phyrst>, <&cpg 0xad>;
+ phys = <&usb2_phy1 2>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@15800200 {
+ compatible = "renesas,usb2-phy-r9a09g057";
+ reg = <0 0x15800200 0 0x700>;
+ interrupts = <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>,
+ <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE0>;
+ clock-names = "fck", "usb_x1";
+ resets = <&usb20phyrst>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@15810200 {
+ compatible = "renesas,usb2-phy-r9a09g057";
+ reg = <0 0x15810200 0 0x700>;
+ interrupts = <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb4>,
+ <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE1>;
+ clock-names = "fck", "usb_x1";
+ resets = <&usb21phyrst>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ hsusb: usb@15820000 {
+ compatible = "renesas,usbhs-r9a09g057",
+ "renesas,rzg2l-usbhs";
+ reg = <0 0x15820000 0 0x10000>;
+ interrupts = <GIC_SPI 751 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>;
+ resets = <&usb20phyrst>,
+ <&cpg 0xae>;
+ phys = <&usb2_phy0 3>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb20phyrst: usb20phy-reset@15830000 {
+ compatible = "renesas,r9a09g057-usb2phy-reset";
+ reg = <0 0x15830000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0xb6>;
+ resets = <&cpg 0xaf>;
+ power-domains = <&cpg>;
+ #reset-cells = <0>;
+ status = "disabled";
+ };
+
+ usb21phyrst: usb21phy-reset@15840000 {
+ compatible = "renesas,r9a09g057-usb2phy-reset";
+ reg = <0 0x15840000 0 0x10000>;
+ clocks = <&cpg CPG_MOD 0xb7>;
+ resets = <&cpg 0xaf>;
+ power-domains = <&cpg>;
+ #reset-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: mmc@15c00000 {
compatible = "renesas,sdhi-r9a09g057";
reg = <0x0 0x15c00000 0 0x10000>;
status = "disabled";
};
};
+
+ eth0: ethernet@15c30000 {
+ compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth",
+ "snps,dwmac-5.20";
+ reg = <0 0x15c30000 0 0x10000>;
+ interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3";
+ clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+ <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+ <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180";
+ resets = <&cpg 0xb0>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup0>;
+ snps,mtl-tx-config = <&mtl_tx_setup0>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup0: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup0: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+
+ eth1: ethernet@15c40000 {
+ compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth",
+ "snps,dwmac-5.20";
+ reg = <0 0x15c40000 0 0x10000>;
+ interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
+ "rx-queue-0", "rx-queue-1", "rx-queue-2",
+ "rx-queue-3", "tx-queue-0", "tx-queue-1",
+ "tx-queue-2", "tx-queue-3";
+ clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+ <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>,
+ <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+ <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref",
+ "tx", "rx", "tx-180", "rx-180";
+ resets = <&cpg 0xb1>;
+ power-domains = <&cpg>;
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup1>;
+ snps,mtl-tx-config = <&mtl_tx_setup1>;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mtl_rx_setup1: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+ };
+
+ mtl_tx_setup1: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+ };
+ };
+ };
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,lpi_en;
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <16 8 4 0 0 0 0>;
};
timer {
compatible = "renesas,rzv2h-evk", "renesas,r9a09g057h44", "renesas,r9a09g057";
aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
reg = <0x2 0x40000000 0x2 0x00000000>;
};
- reg_0p8v: regulator0 {
+ reg_0p8v: regulator-0p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-0.8V";
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
gpios-states = <0>;
states = <3300000 0>, <1800000 1>;
};
+
+ /* 32.768kHz crystal */
+ x6: x6-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
&audio_extal_clk {
clock-frequency = <22579200>;
};
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+ð0 {
+ pinctrl-0 = <ð0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+ð1 {
+ pinctrl-0 = <ð1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
&gpu {
status = "okay";
mali-supply = <®_0p8v>;
};
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
clock-frequency = <400000>;
status = "okay";
+
+ raa215300: pmic@12 {
+ compatible = "renesas,raa215300";
+ reg = <0x12>, <0x6f>;
+ reg-names = "main", "rtc";
+ clocks = <&x6>;
+ clock-names = "xin";
+ };
+};
+
+&mdio0 {
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ rxc-skew-psec = <0>;
+ txc-skew-psec = <0>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+&mdio1 {
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ rxc-skew-psec = <0>;
+ txc-skew-psec = <0>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
};
&ostm0 {
};
&pinctrl {
+ eth0_pins: eth0 {
+ pins = "ET0_TXC_TXCLK";
+ output-enable;
+ };
+
+ eth1_pins: eth1 {
+ pins = "ET1_TXC_TXCLK";
+ output-enable;
+ };
+
i2c0_pins: i2c0 {
pinmux = <RZV2H_PORT_PINMUX(3, 0, 1)>, /* I2C0_SDA */
<RZV2H_PORT_PINMUX(3, 1, 1)>; /* I2C0_SCL */
pinmux = <RZV2H_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
};
};
+
+ usb20_pins: usb20 {
+ ovc {
+ pinmux = <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
+ };
+
+ vbus {
+ pinmux = <RZV2H_PORT_PINMUX(9, 5, 14)>; /* VBUS */
+ };
+ };
+
+ usb21_pins: usb21 {
+ ovc {
+ pinmux = <RZV2H_PORT_PINMUX(6, 7, 14)>; /* OVC */
+ };
+
+ vbus {
+ pinmux = <RZV2H_PORT_PINMUX(6, 6, 14)>; /* VBUS */
+ };
+ };
+
+ xspi_pins: xspi0 {
+ ctrl {
+ pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP";
+ output-enable;
+ };
+
+ io {
+ pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3";
+ renesas,output-impedance = <3>;
+ };
+ };
};
&qextal_clk {
status = "okay";
};
+&usb20phyrst {
+ status = "okay";
+};
+
+&usb21phyrst {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb20_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb21_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&wdt1 {
status = "okay";
};
+
+&xspi {
+ pinctrl-0 = <&xspi_pins>;
+ pinctrl-names = "default";
+ /*
+ * MT25QU512ABB8E12 flash chip is capable of running at 166MHz
+ * clock frequency. Set the clock frequency to the maximum 133MHz
+ * supported by the RZ/V2H SoC.
+ */
+ assigned-clocks = <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>;
+ assigned-clock-rates = <133333334>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ vcc-supply = <®_1p8v>;
+ m25p,fast-read;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0x00000000 0x00060000>;
+ };
+
+ partition@60000 {
+ label = "fip";
+ reg = <0x00060000 0x1fa0000>;
+ };
+
+ partition@2000000 {
+ label = "user";
+ reg = <0x2000000 0x2000000>;
+ };
+ };
+ };
+};
* SW_GPIO9_CAN1_STB:
* 0 - Connect to GPIO9 PMOD (default)
* 1 - Connect to CAN1 transceiver STB pin
+ *
+ * GPIO keys are enabled by default. Use PMOD_GPIO macros to disable them
+ * if needed.
*/
/ {
};
aliases {
+ i2c0 = &i2c0;
serial3 = &scif0;
mmc1 = &sdhi1;
};
max-bitrate = <8000000>;
status = "disabled";
};
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ key-1 {
+ interrupts-extended = <&pinctrl KEY_1_GPIO IRQ_TYPE_EDGE_FALLING>;
+ linux,code = <KEY_1>;
+ label = "USER_SW1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-2 {
+ interrupts-extended = <&pinctrl KEY_2_GPIO IRQ_TYPE_EDGE_FALLING>;
+ linux,code = <KEY_2>;
+ label = "USER_SW2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ key-3 {
+ interrupts-extended = <&pinctrl KEY_3_GPIO IRQ_TYPE_EDGE_FALLING>;
+ linux,code = <KEY_3>;
+ label = "USER_SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+ };
};
&canfd {
status = "okay";
};
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
&scif0 {
status = "okay";
};
compatible = "renesas,rzg3e-smarcm", "renesas,r9a09g047e57", "renesas,r9a09g047";
aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
i2c2 = &i2c2;
mmc0 = &sdhi0;
mmc2 = &sdhi2;
clock-frequency = <48000000>;
};
+ð0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+
+ pinctrl-0 = <ð0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+ð1 {
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+
+ pinctrl-0 = <ð1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&gpu {
status = "okay";
mali-supply = <®_vdd0p8v_others>;
};
};
+&mdio0 {
+ phy0: ethernet-phy@7 {
+ compatible = "ethernet-phy-id0022.1640",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ interrupts-extended = <&icu 3 IRQ_TYPE_LEVEL_LOW>;
+ rxc-skew-psec = <1400>;
+ txc-skew-psec = <1400>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+&mdio1 {
+ phy1: ethernet-phy@7 {
+ compatible = "ethernet-phy-id0022.1640",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ interrupts-extended = <&icu 16 IRQ_TYPE_LEVEL_LOW>;
+ rxc-skew-psec = <1400>;
+ txc-skew-psec = <1400>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
&pinctrl {
+ eth0_pins: eth0 {
+ clk {
+ pinmux = <RZG3E_PORT_PINMUX(B, 1, 1)>; /* TXC */
+ output-enable;
+ };
+
+ ctrl {
+ pinmux = <RZG3E_PORT_PINMUX(A, 1, 1)>, /* MDC */
+ <RZG3E_PORT_PINMUX(A, 0, 1)>, /* MDIO */
+ <RZG3E_PORT_PINMUX(C, 2, 15)>, /* PHY_INTR (IRQ2) */
+ <RZG3E_PORT_PINMUX(C, 1, 1)>, /* RXD3 */
+ <RZG3E_PORT_PINMUX(C, 0, 1)>, /* RXD2 */
+ <RZG3E_PORT_PINMUX(B, 7, 1)>, /* RXD1 */
+ <RZG3E_PORT_PINMUX(B, 6, 1)>, /* RXD0 */
+ <RZG3E_PORT_PINMUX(B, 0, 1)>, /* RXC */
+ <RZG3E_PORT_PINMUX(A, 2, 1)>, /* RX_CTL */
+ <RZG3E_PORT_PINMUX(B, 5, 1)>, /* TXD3 */
+ <RZG3E_PORT_PINMUX(B, 4, 1)>, /* TXD2 */
+ <RZG3E_PORT_PINMUX(B, 3, 1)>, /* TXD1 */
+ <RZG3E_PORT_PINMUX(B, 2, 1)>, /* TXD0 */
+ <RZG3E_PORT_PINMUX(A, 3, 1)>; /* TX_CTL */
+ };
+ };
+
+ eth1_pins: eth1 {
+ clk {
+ pinmux = <RZG3E_PORT_PINMUX(E, 1, 1)>; /* TXC */
+ output-enable;
+ };
+
+ ctrl {
+
+ pinmux = <RZG3E_PORT_PINMUX(D, 1, 1)>, /* MDC */
+ <RZG3E_PORT_PINMUX(D, 0, 1)>, /* MDIO */
+ <RZG3E_PORT_PINMUX(F, 2, 15)>, /* PHY_INTR (IRQ15) */
+ <RZG3E_PORT_PINMUX(F, 1, 1)>, /* RXD3 */
+ <RZG3E_PORT_PINMUX(F, 0, 1)>, /* RXD2 */
+ <RZG3E_PORT_PINMUX(E, 7, 1)>, /* RXD1 */
+ <RZG3E_PORT_PINMUX(E, 6, 1)>, /* RXD0 */
+ <RZG3E_PORT_PINMUX(E, 0, 1)>, /* RXC */
+ <RZG3E_PORT_PINMUX(D, 2, 1)>, /* RX_CTL */
+ <RZG3E_PORT_PINMUX(E, 5, 1)>, /* TXD3 */
+ <RZG3E_PORT_PINMUX(E, 4, 1)>, /* TXD2 */
+ <RZG3E_PORT_PINMUX(E, 3, 1)>, /* TXD1 */
+ <RZG3E_PORT_PINMUX(E, 2, 1)>, /* TXD0 */
+ <RZG3E_PORT_PINMUX(D, 3, 1)>; /* TX_CTL */
+ };
+ };
+
i2c2_pins: i2c {
pinmux = <RZG3E_PORT_PINMUX(3, 4, 1)>, /* SCL2 */
<RZG3E_PORT_PINMUX(3, 5, 1)>; /* SDA2 */
pinmux = <RZG3E_PORT_PINMUX(K, 2, 1)>; /* SD2PWEN */
};
};
+
+ xspi_pins: xspi0 {
+ pinmux = <RZG3E_PORT_PINMUX(M, 0, 0)>, /* XSPI0_IO0 */
+ <RZG3E_PORT_PINMUX(M, 1, 0)>, /* XSPI0_IO1 */
+ <RZG3E_PORT_PINMUX(M, 2, 0)>, /* XSPI0_IO2 */
+ <RZG3E_PORT_PINMUX(M, 3, 0)>, /* XSPI0_IO3 */
+ <RZG3E_PORT_PINMUX(L, 0, 0)>, /* XSPI0_CKP */
+ <RZG3E_PORT_PINMUX(L, 1, 0)>; /* XSPI0_CS0 */
+ };
};
&qextal_clk {
&wdt1 {
status = "okay";
};
+
+&xspi {
+ pinctrl-0 = <&xspi_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ vcc-supply = <®_1p8v>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0x00000000 0x00060000>;
+ };
+
+ partition@60000 {
+ label = "fip";
+ reg = <0x00060000 0x007a0000>;
+ };
+
+ partition@800000 {
+ label = "user";
+ reg = <0x800000 0x800000>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Shared DT overlay for the eMMC Sub Board (RTK0EF0186B02000BJ), which
+ * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&{/} {
+ aliases {
+ mmc0 = "/soc/mmc@15c00000";
+ };
+};
+
+&pinctrl {
+ sdhi0_emmc_pins: emmc-pins {
+ sd0-clk {
+ pins = "SD0CLK";
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+
+ sd0-dat-cmd {
+ pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0DAT4",
+ "SD0DAT5", "SD0DAT6", "SD0DAT7", "SD0CMD";
+ input-enable;
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_emmc_pins>;
+ pinctrl-1 = <&sdhi0_emmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Shared DT overlay for the microSD Sub Board (RTK0EF0186B01000BJ), which
+ * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&{/} {
+ aliases {
+ mmc0 = "/soc/mmc@15c00000";
+ };
+
+ vqmmc_sdhi0: regulator-vqmmc-sdhi0 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHI0 VqmmC";
+ gpios = <&pinctrl RZG2L_GPIO(10, 0) GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios-states = <0>;
+ states = <3300000 0>, <1800000 1>;
+ };
+};
+
+&pinctrl {
+ sdhi0-pwr-en-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(10, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sd0_pwr_en";
+ };
+
+ sdhi0_pins: sd0 {
+ sd0-cd {
+ pinmux = <RZG2L_PORT_PINMUX(10, 5, 15)>; /* SD0_CD */
+ };
+
+ sd0-clk {
+ pins = "SD0CLK";
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+
+ sd0-dat-cmd {
+ pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD";
+ input-enable;
+ renesas,output-impedance = <3>;
+ slew-rate = <0>;
+ };
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins>;
+ pinctrl-names = "default", "state_uhs";
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <&vqmmc_sdhi0>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
};
&i2c_dvfs {
+ bootph-all;
status = "okay";
clock-frequency = <400000>;
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
+ bootph-all;
};
};
};
&i2c_dvfs {
+ bootph-all;
status = "okay";
clock-frequency = <400000>;
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
+ bootph-all;
};
};
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
panel@0 {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
panel@0 {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
panel@0 {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
panel@0 {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
ports {
ports {
port@0 {
- mipi_in_ucam: endpoint@0 {
- reg = <0>;
+ mipi_in_ucam: endpoint {
data-lanes = <1 2>;
remote-endpoint = <&ucam_out>;
};
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
panel@0 {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
panel@0 {
};
vcc_cam_avdd: regulator-vcc-cam-avdd {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "vcc_cam_avdd";
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
};
vcc_cam_dovdd: regulator-vcc-cam-dovdd {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "vcc_cam_dovdd";
gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
};
vcc_cam_dvdd: regulator-vcc-cam-dvdd {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "vcc_cam_dvdd";
gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_lens_afvdd: regulator-vcc-lens-afvdd {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "vcc_lens_afvdd";
gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
ports {
port@0 {
- mipi_in_ucam: endpoint@0 {
- reg = <0>;
+ mipi_in_ucam: endpoint {
data-lanes = <1 2>;
remote-endpoint = <&ucam_out>;
};
};
cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <2800000>;
regulator-min-microvolt = <2800000>;
};
cam_avdd_2v8: regulator-cam-avdd-2v8 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <2800000>;
regulator-min-microvolt = <2800000>;
};
cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
};
};
+&cif_clkout_m0 {
+ rockchip,pins =
+ <2 RK_PB3 1 &pcfg_pull_none_12ma>;
+};
+
+&csi_dphy {
+ status = "okay";
+};
+
&display_subsystem {
status = "okay";
};
/* OV5675, GT911, DW9714 are limited to 400KHz */
clock-frequency = <400000>;
+ focus: focus@c {
+ compatible = "dongwoon,dw9714";
+ reg = <0xc>;
+ vcc-supply = <&cam_afvdd_2v8>;
+ };
+
touchscreen@14 {
compatible = "goodix,gt911";
reg = <0x14>;
pinctrl-names = "default";
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
};
+
+ camera@36 {
+ compatible = "ovti,ov5675";
+ reg = <0x36>;
+ clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clocks = <&cru SCLK_CIF_OUT>;
+ /* Only parent to get exactly 19.2MHz */
+ assigned-clock-parents = <&cru USB480M>;
+ assigned-clock-rates = <19200000>;
+ avdd-supply = <&cam_avdd_2v8>;
+ dvdd-supply = <&cam_dvdd_1v2>;
+ dovdd-supply = <&cam_dovdd_1v8>;
+ lens-focus = <&focus>;
+ orientation = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+ reset-gpios = <&pca9670 6 GPIO_ACTIVE_LOW>;
+ rotation = <180>;
+
+ port {
+ cam_out: endpoint {
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <450000000>;
+ remote-endpoint = <&mipi_in_cam>;
+ };
+ };
+ };
+};
+
+&isp {
+ status = "okay";
+};
+
+&isp_in {
+ mipi_in_cam: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&cam_out>;
+ };
};
&pinctrl {
pmugrf: syscon@ff010000 {
compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff010000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
pmu_io_domains: io-domains {
compatible = "rockchip,px30-pmu-io-voltage-domain";
grf: syscon@ff140000 {
compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
reg = <0x0 0xff140000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
io_domains: io-domains {
compatible = "rockchip,px30-io-voltage-domain";
resets = <&cru SRST_MIPIDSI_HOST_P>;
reset-names = "apb";
rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ isp_in: port@0 {
reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
};
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
+ * Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
+ * Copyright (C) 2024 TheSnowfield <thesnowfield@sakurapi.org>
+ * Copyright (C) 2025 Hsun Lai <i@chainsx.cn>
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Sakura Pi RK3308B";
+ compatible = "sakurapi,rk3308-sakurapi-rk3308b", "rockchip,rk3308";
+
+ aliases {
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_core: regulator-vdd-core {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <827000>;
+ regulator-max-microvolt = <1340000>;
+ regulator-settling-time-up-us = <250>;
+ regulator-always-on;
+ regulator-boot-on;
+ pwm-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_log: regulator-vdd-log {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: regulator-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v8: regulator-vcc-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_io: regulator-vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_phy: regulator-vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_otg: regulator-vcc5v0-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc5v0_otg";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-0 = <&wifi_enable_h>;
+ pinctrl-names = "default";
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
+
+ bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake: wifi-host-wake {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+ pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ no-mmc;
+ no-sd;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake>;
+ };
+};
+
+&sdmmc {
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+ card-detect-delay = <800>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&cru SCLK_RTC32K>;
+ clock-names = "lpo";
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_wake_bt &bt_wake_host &bt_reg_on>;
+ device-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
+ };
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_otg {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_host_ohci {
+ status = "okay";
+};
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
ports {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
internal_display: panel@0 {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
ports {
status = "disabled";
vop_out: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vop_out_hdmi: endpoint@0 {
- reg = <0>;
+ vop_out_hdmi: endpoint {
remote-endpoint = <&hdmi_in_vop>;
};
};
bluetooth {
compatible = "brcm,bcm4345c5";
- interrupts-extended = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&gpio3 RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wakeup";
clocks = <&rk808 RK808_CLKOUT1>;
clock-names = "lpo";
resets = <&cru SRST_P_MIPI_DSI0>;
reset-names = "apb";
rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
ports {
resets = <&cru SRST_P_MIPI_DSI1>;
reset-names = "apb";
rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
#phy-cells = <0>;
status = "disabled";
*/
assigned-clocks = <&cru PCLK_EDP>;
assigned-clock-rates = <24000000>;
+};
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
+&edp_out {
+ edp_out_panel: endpoint {
+ remote-endpoint = <&panel_in_edp>;
};
};
};
&mipi_dsi {
- status = "okay";
clock-master;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
ports {
mipi_out: port@1 {
vdd_cpu_b: syr827@40 {
compatible = "silergy,syr827";
reg = <0x40>;
- regulator-compatible = "fan53555-reg";
pinctrl-0 = <&vsel1_pin>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
vdd_gpu: syr828@41 {
compatible = "silergy,syr828";
reg = <0x41>;
- regulator-compatible = "fan53555-reg";
pinctrl-0 = <&vsel2_pin>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
pinctrl-names = "default";
pinctrl-0 = <&edp_hpd>;
status = "okay";
+};
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
+&edp_out {
+ edp_out_panel: endpoint {
+ remote-endpoint = <&panel_in_edp>;
};
};
reg = <0>;
m25p,fast-read;
spi-max-frequency = <10000000>;
+ vcc-supply = <&vcc_3v0>;
};
};
regulator-boot-on;
};
+ avdd2v8_dvp: regulator-avdd2v8-dvp {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_sys: regulator-vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
vin-supply = <&vcc3v3_sys>;
};
+ vcc1v2_dvp: regulator-vcc1v2-dvp {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v2_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vcca1v8_s3>;
+ };
+
wifi_pwrseq: sdio-wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk818 1>;
vcca1v8_codec: LDO_REG3 {
regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
+&i2c1 {
+ assigned-clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clock-rates = <24000000>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer &cif_clkouta>;
+ status = "okay";
+
+ wcam: camera@1a {
+ compatible = "sony,imx258";
+ reg = <0x1a>;
+ clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK0, derived from CIF_CLKO */
+ lens-focus = <&wcam_lens>;
+ orientation = <1>; /* V4L2_CAMERA_ORIENTATION_BACK */
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_rst_l>;
+ reset-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
+ rotation = <270>;
+ /* Note: both cameras also depend on vcca1v8_codec to power the I2C bus. */
+ vif-supply = <&vcc1v8_dvp>;
+ vana-supply = <&avdd2v8_dvp>;
+ vdig-supply = <&vcc1v2_dvp>; /* DVDD_DVP is the same as VCC1V2_DVP */
+
+ port {
+ wcam_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <636000000>;
+ remote-endpoint = <&mipi_in_wcam>;
+ };
+ };
+ };
+
+ wcam_lens: camera-lens@c {
+ compatible = "dongwoon,dw9714";
+ reg = <0x0c>;
+ /* Same I2c bus as both cameras, depends on vcca1v8_codec for power. */
+ vcc-supply = <&vcc1v8_dvp>;
+ };
+
+ ucam: camera@36 {
+ compatible = "ovti,ov8858";
+ reg = <0x36>;
+ clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK1, derived from CIF_CLK0 */
+ clock-names = "xvclk";
+ dovdd-supply = <&vcc1v8_dvp>;
+ orientation = <0>; /* V4L2_CAMERA_ORIENTATION_FRONT */
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera2_rst_l &dvp_pdn0_h>;
+ powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+ rotation = <90>;
+
+ port {
+ ucam_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&mipi_in_ucam>;
+ };
+ };
+ };
+};
+
&i2c3 {
i2c-scl-rising-time-ns = <450>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
};
-&mipi_dsi {
+&isp0 {
status = "okay";
- clock-master;
ports {
- mipi_out: port@1 {
- #address-cells = <0>;
- #size-cells = <0>;
- reg = <1>;
+ port@0 {
+ mipi_in_ucam: endpoint@0 {
+ reg = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&ucam_out>;
+ };
+ };
+ };
+};
+
+&isp0_mmu {
+ status = "okay";
+};
+
+&isp1 {
+ status = "okay";
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
+ ports {
+ port@0 {
+ mipi_in_wcam: endpoint@0 {
+ reg = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&wcam_out>;
};
};
};
+};
+
+&mipi_dphy_rx0 {
+ status = "okay";
+};
+
+&isp1_mmu {
+ status = "okay";
+};
+
+&mipi_dsi {
+ clock-master;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
panel@0 {
- compatible = "hannstar,hsd060bhw4";
+ compatible = "hannstar,hsd060bhw4", "himax,hx8394";
reg = <0>;
backlight = <&backlight>;
- reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
- vcc-supply = <&vcc2v8_lcd>;
iovcc-supply = <&vcc1v8_lcd>;
pinctrl-names = "default";
+ pinctrl-0 = <&lcd1_rst_pin>;
+ reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vcc2v8_lcd>;
port {
mipi_in_panel: endpoint {
};
};
+&mipi_out {
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+};
+
+&mipi_dsi1 {
+ status = "okay";
+};
+
&pmu_io_domains {
pmu1830-supply = <&vcc_1v8>;
status = "okay";
};
};
+ lcd {
+ lcd1_rst_pin: lcd1-rst-pin {
+ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ cameras {
+ camera_rst_l: camera-rst-l {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ camera2_rst_l: camera2-rst-l {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ dvp_pdn0_h: dvp-pdn0-h {
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
red_led_pin: red-led-pin {
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
+ vcc-supply = <&vcc_1v8>;
};
};
};
cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <2800000>;
regulator-min-microvolt = <2800000>;
};
cam_avdd_2v8: regulator-cam-avdd-2v8 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <2800000>;
regulator-min-microvolt = <2800000>;
};
cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
};
};
-&mipi_out {
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
- };
-};
-
&mipi_dsi {
#address-cells = <1>;
#size-cells = <0>;
};
};
+&mipi_out {
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+};
+
&pinctrl {
pca9670 {
pca9670_resetn: pca9670-resetn {
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
- regulator-compatible = "fan53555-reg";
pinctrl-0 = <&vsel1_gpio>;
vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
regulator-name = "vdd_cpu_b";
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
- regulator-compatible = "fan53555-reg";
pinctrl-0 = <&vsel2_gpio>;
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
regulator-name = "vdd_gpu";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 Peter Robinson <pbrobinson@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+ avdd: regulator-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd";
+ regulator-min-microvolt = <11000000>;
+ regulator-max-microvolt = <11000000>;
+ vin-supply = <&vcc3v3_s0>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ pwms = <&pwm0 0 1000000 0>;
+ status = "okay";
+ };
+};
+
+&i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touch: touchscreen@5d {
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+ AVDD28-supply = <&vcc3v0_touch>;
+ VDDIO-supply = <&vcc3v0_touch>;
+ irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
+&mipi_dsi {
+ clock-master;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ mipi_panel: panel@0 {
+ compatible = "feiyang,fy07024di26a30d";
+ reg = <0>;
+ avdd-supply = <&avdd>;
+ backlight = <&backlight>;
+ dvdd-supply = <&vcc3v3_s0>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&mipi_out {
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
stdout-path = "serial2:1500000n8";
};
- /* enable for panel backlight support */
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <5>;
- pwms = <&pwm0 0 1000000 0>;
- status = "disabled";
- };
-
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
};
};
- avdd: regulator-avdd {
- compatible = "regulator-fixed";
- regulator-name = "avdd";
- regulator-min-microvolt = <11000000>;
- regulator-max-microvolt = <11000000>;
- vin-supply = <&vcc3v3_s0>;
- };
-
vcc12v_dcin: regulator-vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
vbus-supply = <&vcc5v0_typec>;
status = "okay";
};
-
- /* enable for pine64 touch screen support */
- touch: touchscreen@5d {
- compatible = "goodix,gt911";
- reg = <0x5d>;
- interrupt-parent = <&gpio4>;
- interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
- AVDD28-supply = <&vcc3v0_touch>;
- VDDIO-supply = <&vcc3v0_touch>;
- irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
- status = "disabled";
- };
};
&i2s0 {
gpio1830-supply = <&vcc_3v0>;
};
-/* enable for pine64 panel display support */
-&mipi_dsi {
- clock-master;
- status = "disabled";
-
- ports {
- mipi_out: port@1 {
- reg = <1>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
- };
- };
- };
-
- mipi_panel: panel@0 {
- compatible = "feiyang,fy07024di26a30d";
- reg = <0>;
- avdd-supply = <&avdd>;
- backlight = <&backlight>;
- dvdd-supply = <&vcc3v3_s0>;
-
- port {
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
-};
-
&pcie0 {
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
};
};
-&pwm0 {
- status = "okay";
-};
-
&pwm1 {
status = "okay";
};
&edp {
status = "okay";
+};
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
+&edp_out {
+ edp_out_panel: endpoint {
+ remote-endpoint = <&panel_in_edp>;
};
};
-
&i2c1 {
i2c-scl-rising-time-ns = <300>;
i2c-scl-falling-time-ns = <15>;
fephy {
/omit-if-no-ref/
- fephym0_led_dpx: fephym0-led_dpx {
+ fephym0_led_dpx: fephym0-led-dpx {
rockchip,pins =
/* fephy_led_dpx_m0 */
<4 RK_PB5 2 &pcfg_pull_none>;
};
/omit-if-no-ref/
- fephym0_led_link: fephym0-led_link {
+ fephym0_led_link: fephym0-led-link {
rockchip,pins =
/* fephy_led_link_m0 */
<4 RK_PC0 2 &pcfg_pull_none>;
};
/omit-if-no-ref/
- fephym0_led_spd: fephym0-led_spd {
+ fephym0_led_spd: fephym0-led-spd {
rockchip,pins =
/* fephy_led_spd_m0 */
<4 RK_PB7 2 &pcfg_pull_none>;
};
/omit-if-no-ref/
- fephym1_led_dpx: fephym1-led_dpx {
+ fephym1_led_dpx: fephym1-led-dpx {
rockchip,pins =
/* fephy_led_dpx_m1 */
<2 RK_PA4 5 &pcfg_pull_none>;
};
/omit-if-no-ref/
- fephym1_led_link: fephym1-led_link {
+ fephym1_led_link: fephym1-led-link {
rockchip,pins =
/* fephy_led_link_m1 */
<2 RK_PA6 5 &pcfg_pull_none>;
};
/omit-if-no-ref/
- fephym1_led_spd: fephym1-led_spd {
+ fephym1_led_spd: fephym1-led-spd {
rockchip,pins =
/* fephy_led_spd_m1 */
<2 RK_PA5 5 &pcfg_pull_none>;
};
/omit-if-no-ref/
- rgmii_rx_bus2: rgmii-rx_bus2 {
+ rgmii_rx_bus2: rgmii-rx-bus2 {
rockchip,pins =
/* rgmii_rxd0 */
<3 RK_PA3 2 &pcfg_pull_none>,
};
/omit-if-no-ref/
- rgmii_tx_bus2: rgmii-tx_bus2 {
+ rgmii_tx_bus2: rgmii-tx-bus2 {
rockchip,pins =
/* rgmii_txd0 */
<3 RK_PA1 2 &pcfg_pull_none_drv_level_2>,
};
/omit-if-no-ref/
- rgmii_rgmii_clk: rgmii-rgmii_clk {
+ rgmii_rgmii_clk: rgmii-rgmii-clk {
rockchip,pins =
/* rgmii_rxclk */
<3 RK_PA5 2 &pcfg_pull_none>,
};
/omit-if-no-ref/
- rgmii_rgmii_bus: rgmii-rgmii_bus {
+ rgmii_rgmii_bus: rgmii-rgmii-bus {
rockchip,pins =
/* rgmii_rxd2 */
<3 RK_PA7 2 &pcfg_pull_none>,
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1m0_xfer>;
&sdhci {
bus-width = <8>;
cap-mmc-highspeed;
+ mmc-hs200-1_8v;
no-sd;
no-sdio;
non-removable;
};
};
+ gpu_opp_table: opp-table-gpu {
+ compatible = "operating-points-v2";
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <875000 875000 1000000>;
+ opp-suspend;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <875000 875000 1000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <875000 875000 1000000>;
+ };
+
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <900000 900000 1000000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <950000 950000 1000000>;
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3528-pinctrl";
rockchip,grf = <&ioc_grf>;
reg = <0x0 0xff540000 0x0 0x40000>;
};
+ pmu: power-management@ff600000 {
+ compatible = "rockchip,rk3528-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff600000 0x0 0x2000>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3528-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_GPU */
+ power-domain@4 {
+ reg = <4>;
+ clocks = <&cru ACLK_GPU_MALI>,
+ <&cru PCLK_GPU_ROOT>;
+ pm_qos = <&qos_gpu_m0>,
+ <&qos_gpu_m1>;
+ #power-domain-cells = <0>;
+ };
+
+ /* These power domains are grouped by VD_LOGIC */
+ power-domain@5 {
+ reg = <5>;
+ pm_qos = <&qos_rkvdec>;
+ #power-domain-cells = <0>;
+ status = "disabled";
+ };
+ power-domain@6 {
+ reg = <6>;
+ pm_qos = <&qos_rkvenc>;
+ #power-domain-cells = <0>;
+ status = "disabled";
+ };
+ power-domain@7 {
+ reg = <7>;
+ pm_qos = <&qos_gmac0>,
+ <&qos_hdcp>,
+ <&qos_jpegdec>,
+ <&qos_rga2_m0ro>,
+ <&qos_rga2_m0wo>,
+ <&qos_sdmmc0>,
+ <&qos_usb2host>,
+ <&qos_vdpp>,
+ <&qos_vop>;
+ #power-domain-cells = <0>;
+ status = "disabled";
+ };
+ power-domain@8 {
+ reg = <8>;
+ pm_qos = <&qos_emmc>,
+ <&qos_fspi>,
+ <&qos_gmac1>,
+ <&qos_pcie>,
+ <&qos_sdio0>,
+ <&qos_sdio1>,
+ <&qos_tsp>,
+ <&qos_usb3otg>,
+ <&qos_vpu>;
+ #power-domain-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ gpu: gpu@ff700000 {
+ compatible = "rockchip,rk3528-mali", "arm,mali-450";
+ reg = <0x0 0xff700000 0x0 0x40000>;
+ assigned-clocks = <&cru ACLK_GPU_MALI>,
+ <&scmi_clk SCMI_CLK_GPU>;
+ assigned-clock-rates = <297000000>, <300000000>;
+ clocks = <&cru ACLK_GPU_MALI>, <&scmi_clk SCMI_CLK_GPU>;
+ clock-names = "bus", "core";
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1";
+ operating-points-v2 = <&gpu_opp_table>;
+ power-domains = <&power 4>;
+ resets = <&cru SRST_A_GPU>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff9c0000 {
+ compatible = "rockchip,rk3528-spi",
+ "rockchip,rk3066-spi";
+ reg = <0x0 0xff9c0000 0x0 0x1000>;
+ clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac 25>, <&dmac 24>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff9d0000 {
+ compatible = "rockchip,rk3528-spi",
+ "rockchip,rk3066-spi";
+ reg = <0x0 0xff9d0000 0x0 0x1000>;
+ clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac 31>, <&dmac 30>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart0: serial@ff9f0000 {
compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart";
reg = <0x0 0xff9f0000 0x0 0x100>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 8>, <&dmac 9>;
+ dmas = <&dmac 9>, <&dmac 8>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 10>, <&dmac 11>;
+ dmas = <&dmac 11>, <&dmac 10>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 12>, <&dmac 13>;
+ dmas = <&dmac 13>, <&dmac 12>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 14>, <&dmac 15>;
+ dmas = <&dmac 15>, <&dmac 14>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 16>, <&dmac 17>;
+ dmas = <&dmac 17>, <&dmac 16>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 18>, <&dmac 19>;
+ dmas = <&dmac 19>, <&dmac 18>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 20>, <&dmac 21>;
+ dmas = <&dmac 21>, <&dmac 20>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac 22>, <&dmac 23>;
+ dmas = <&dmac 23>, <&dmac 22>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/rockchip,rk3562-power.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/reset/rockchip,rk3562-cru.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
num-lanes = <1>;
phys = <&combphy PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
- power-domains = <&power 15>;
+ power-domains = <&power RK3562_PD_PHP>;
ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x100000
0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x1e00000
0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>;
#address-cells = <1>;
#size-cells = <0>;
- power-domain@8 {
- reg = <8>;
+ power-domain@RK3562_PD_GPU {
+ reg = <RK3562_PD_GPU>;
pm_qos = <&qos_gpu>;
#power-domain-cells = <0>;
};
- power-domain@7 {
- reg = <7>;
+ power-domain@RK3562_PD_NPU {
+ reg = <RK3562_PD_NPU>;
pm_qos = <&qos_npu>;
#power-domain-cells = <0>;
};
- power-domain@11 {
- reg = <11>;
+ power-domain@RK3562_PD_VDPU {
+ reg = <RK3562_PD_VDPU>;
pm_qos = <&qos_rkvdec>;
#power-domain-cells = <0>;
};
- power-domain@12 {
- reg = <12>;
+ power-domain@RK3562_PD_VI {
+ reg = <RK3562_PD_VI>;
pm_qos = <&qos_isp>,
<&qos_vicap>;
#power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
- power-domain@10 {
- reg = <10>;
+ power-domain@RK3562_PD_VEPU {
+ reg = <RK3562_PD_VEPU>;
pm_qos = <&qos_vepu>;
#power-domain-cells = <0>;
};
};
- power-domain@13 {
- reg = <13>;
+ power-domain@RK3562_PD_VO {
+ reg = <RK3562_PD_VO>;
pm_qos = <&qos_vop>;
#power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
- power-domain@14 {
- reg = <14>;
+ power-domain@RK3562_PD_RGA {
+ reg = <RK3562_PD_RGA>;
pm_qos = <&qos_rga_rd>,
<&qos_rga_wr>,
<&qos_jpeg>;
};
};
- power-domain@15 {
- reg = <15>;
+ power-domain@RK3562_PD_PHP {
+ reg = <RK3562_PD_PHP>;
pm_qos = <&qos_pcie>,
<&qos_usb3>;
#power-domain-cells = <0>;
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
operating-points-v2 = <&gpu_opp_table>;
- power-domains = <&power 8>;
+ power-domains = <&power RK3562_PD_GPU>;
#cooling-cells = <2>;
status = "disabled";
};
};
&i2c1 {
- /* Unknown/unused device at 0x3c */
+ /* Unused iSmartWare SW2001 encryption device at 0x3c */
status = "disabled";
};
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
pinctrl-names = "default";
- pinctrl-0 =<&blue_led>;
+ pinctrl-0 = <&blue_led>;
};
led-1 {
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
pinctrl-names = "default";
- pinctrl-0 =<&heartbeat_led>;
+ pinctrl-0 = <&heartbeat_led>;
};
};
label = "cover";
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
- linux,code = <SW_MACHINE_COVER>;
+ linux,code = <SW_LID>;
linux,can-disable;
wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
reg = <0>;
backlight = <&backlight>;
enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
- rotation = <90>;
power-supply = <&vcc_3v3>;
+ rotation = <90>;
- port@0 {
- panel_in_dsi: endpoint@0 {
+ port {
+ panel_in_dsi: endpoint {
remote-endpoint = <&dsi0_out_con>;
};
};
mmc1 = &sdhci;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <20 220>;
+ default-brightness-level = <100>;
+ num-interpolated-steps = <200>;
+ power-supply = <&vcc3v3_sys>;
+ pwms = <&pwm4 0 25000 0>;
+ };
+
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
cpu-supply = <&vdd_cpu>;
};
+&dsi0 {
+ clock-master;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "wanchanglong,w552793baa", "raydium,rm67200";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc3v3_lcd0_n>;
+ reset-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc3v3_lcd0_n>;
+ vsn-supply = <&vcc5v0_sys>;
+ vsp-supply = <&vcc5v0_sys>;
+
+ port {
+ panel_in_dsi: endpoint {
+ remote-endpoint = <&dsi0_out_panel>;
+ };
+ };
+ };
+
+};
+
+&dsi0_in {
+ dsi0_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_dsi0>;
+ };
+};
+
+&dsi0_out {
+ dsi0_out_panel: endpoint {
+ remote-endpoint = <&panel_in_dsi>;
+ };
+};
+
+&dsi_dphy0 {
+ status = "okay";
+};
+
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
status = "okay";
};
+&pwm4 {
+ status = "okay";
+};
+
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&vop {
- assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
- assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru PLL_VPLL>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&xin24m>, <&cru PLL_VPLL>;
+ assigned-clock-rates = <0>, <132000000>, <132000000>;
status = "okay";
};
remote-endpoint = <&hdmi_in_vp0>;
};
};
+
+&vp1 {
+ vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+ reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+ remote-endpoint = <&dsi0_in_vp1>;
+ };
+};
ethernet0 = &gmac0;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio4_a0_k1_pin>;
+ pinctrl-names = "default";
+
+ button-reset {
+ debounce-interval = <50>;
+ gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "RESET";
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
};
};
+ gpio-keys {
+ gpio4_a0_k1_pin: gpio4-a0-k1-pin {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
gpio-leds {
lan1_led_pin: lan1-led-pin {
rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
aliases {
mmc0 = &sdmmc0;
mmc1 = &sdhci;
+ rtc0 = &hym8563;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "MASKROM";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
hdmi-con {
compatible = "hdmi-connector";
type = "a";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT-overlay to enable the onboard WiFi and Bluetooth module present in v1.2
+ * boards. Note that v1.1 boards use a different module, so this probably won't
+ * work there.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ clock-names = "lpo";
+ clocks = <&hym8563>;
+ interrupt-names = "host-wake";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&wifi_wake_host>;
+ pinctrl-names = "default";
+ };
+};
+
+&uart4 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clock-names = "lpo";
+ clocks = <&hym8563>;
+ device-wakeup-gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wakeup";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&bt_reg_on>, <&bt_wake_host>, <&host_wake_bt>;
+ pinctrl-names = "default";
+ shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc_3v3_s3>;
+ vddio-supply = <&vcc_1v8_s3>;
+ };
+};
vin-supply = <&vcc_12v0_dcin>;
};
+ vcc_5v0_typec0: regulator-vcc-5v0-typec0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg0_pwren>;
+ regulator-name = "vcc_5v0_typec0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_device>;
+ };
+
+ vcc_5v0_usbhost: regulator-vcc-5v0-usbhost {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren>;
+ regulator-name = "vcc_5v0_usbhost";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_device>;
+ };
+
vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_ufs_s0";
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_5v0_sys>;
};
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on>;
+ reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&combphy1_psu {
+ status = "okay";
};
&combphy0_ps {
&gmac0 {
phy-mode = "rgmii-id";
clock_in_out = "output";
-
- snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 20000 100000>;
-
+ phy-handle = <&rgmii_phy0>;
pinctrl-names = "default";
pinctrl-0 = <ð0m0_miim
ð0m0_tx_bus2
ð0m0_rx_bus2
ð0m0_rgmii_clk
ð0m0_rgmii_bus>;
-
- phy-handle = <&rgmii_phy0>;
status = "okay";
};
&gmac1 {
phy-mode = "rgmii-id";
clock_in_out = "output";
-
- snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 20000 100000>;
-
+ phy-handle = <&rgmii_phy1>;
pinctrl-names = "default";
pinctrl-0 = <ð1m0_miim
ð1m0_tx_bus2
ð1m0_rx_bus2
ð1m0_rgmii_clk
- ð1m0_rgmii_bus
- ðm0_clk1_25m_out>;
-
- phy-handle = <&rgmii_phy1>;
+ ð1m0_rgmii_bus>;
status = "okay";
};
&i2c2 {
status = "okay";
+ usbc0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_interrupt>;
+ vbus-supply = <&vcc_5v0_typec0>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ /* fusb302 supports PD Rev 2.0 Ver 1.2 */
+ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+ power-role = "source";
+ source-pdos = <PDO_FIXED(5000, 2000,
+ PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
+
+ altmodes {
+ displayport {
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0xffffffff>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs_ep: endpoint {
+ remote-endpoint = <&usb_drd0_hs_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usbc0_ss_ep: endpoint {
+ remote-endpoint = <&usb_drd0_ss_ep>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usbc0_dp_ep: endpoint {
+ remote-endpoint = <&usbdp_phy_ep>;
+ };
+ };
+ };
+ };
+ };
+
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
rgmii_phy0: phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
- clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
};
};
rgmii_phy1: phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x1>;
- clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
+ gmac {
+ gmac0_rst: gmac0-rst {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ gmac1_rst: gmac1-rst {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
headphone {
hp_det: hp-det {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ usb {
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ usb_otg0_pwren: usb-otg0-pwren {
+ rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ usbc0_interrupt: usbc0-interrupt {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ usbc0_sbu1: usbc0-sbu1 {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ usbc0_sbu2: usbc0-sbu2 {
+ rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wireless-bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wireless-wlan {
+ wifi_wake_host: wifi-wake-host {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ wifi_reg_on: wifi-reg-on {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&sai1 {
status = "okay";
};
+&sdio {
+ bus-width = <4>;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-sd;
+ no-mmc;
+ non-removable;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc_1v8_s3>;
+ wakeup-source;
+ status = "okay";
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc_5v0_usbhost>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-0 = <&uart0m0_xfer>;
status = "okay";
};
+/* Used by Bluetooth modules, enabled in a version specific overlay */
+&uart4 {
+ pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&usb_drd0_dwc3 {
+ usb-role-switch;
+ dr_mode = "otg";
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_drd0_hs_ep: endpoint {
+ remote-endpoint = <&usbc0_hs_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usb_drd0_ss_ep: endpoint {
+ remote-endpoint = <&usbc0_ss_ep>;
+ };
+ };
+ };
+};
+
+&usb_drd1_dwc3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbdp_phy {
+ mode-switch;
+ orientation-switch;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>;
+ sbu1-dc-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ usbdp_phy_ep: endpoint {
+ remote-endpoint = <&usbc0_dp_ep>;
+ };
+ };
+};
+
&vop {
status = "okay";
};
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3576.dtsi"
+
+/ {
+ model = "Luckfox Core3576 Module";
+ compatible = "luckfox,core3576","rockchip,rk3576";
+
+ aliases {
+ mmc0 = &sdhci;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ hdmi-pwr-supply = <&vcc_5v0_hdmi>;
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ vbus_5v0_typec: regulator-vbus-5v0-typec {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg0_pwr_en>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vbus5v0_typec";
+ vin-supply = <&vcc_5v0_device>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ vin-supply = <&vcc_5v0_sys>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-name = "vcc_2v0_pldo_s3";
+ vin-supply = <&vcc_5v0_sys>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3_pcie: regulator-vcc-3v3-pcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_pcie";
+ startup-delay-us = <1000>;
+ vin-supply = <&vcc_5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_rtc_s5";
+ vin-supply = <&vcc_5v0_sys>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_5v0_dcin: regulator-vcc-5v0-dcin {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc_5v0_dcin";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_5v0_device: regulator-vcc-5v0-device {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc_5v0_device";
+ vin-supply = <&vcc_5v0_dcin>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_5v0_hdmi: regulator-vcc-5v0-hdmi {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_con_en>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc_5v0_hdmi";
+ vin-supply = <&vcc_5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_5v0_host: regulator-vcc-5v0-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwr_en>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc_5v0_host";
+ vin-supply = <&vcc_5v0_device>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_5v0_sys: regulator-vcc-5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc_5v0_sys";
+ vin-supply = <&vcc_5v0_dcin>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdptxphy {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ pmic@23 {
+ compatible = "rockchip,rk806";
+ reg = <0x23>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio0>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc_5v0_sys>;
+ vcc2-supply = <&vcc_5v0_sys>;
+ vcc3-supply = <&vcc_5v0_sys>;
+ vcc4-supply = <&vcc_5v0_sys>;
+ vcc5-supply = <&vcc_5v0_sys>;
+ vcc6-supply = <&vcc_5v0_sys>;
+ vcc7-supply = <&vcc_5v0_sys>;
+ vcc8-supply = <&vcc_5v0_sys>;
+ vcc9-supply = <&vcc_5v0_sys>;
+ vcc10-supply = <&vcc_5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc_5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc_5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs1_slp: dvs1-slp-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs1_rst: dvs1-rst-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs2_slp: dvs2-slp-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs2_rst: dvs2-rst-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs2_dvs: dvs2-dvs-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun4";
+ };
+
+ rk806_dvs2_gpio: dvs2-gpio-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun5";
+ };
+
+
+ rk806_dvs3_slp: dvs3-slp-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs3_rst: dvs3-rst-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs3_dvs: dvs3-dvs-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun4";
+ };
+
+ rk806_dvs3_gpio: dvs3-gpio-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun5";
+ };
+
+ regulators {
+ vdd_cpu_big_s0: dcdc-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_big_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_npu_s0: dcdc-reg2 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_npu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_gpu_s0: dcdc-reg5 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_logic_s0: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <800000>;
+ regulator-name = "vdd_logic_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pldo2_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pldo2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdda_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdda_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v75_hdmi_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <837500>;
+ regulator-max-microvolt = <837500>;
+ regulator-name = "vdda0v75_hdmi_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdda_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ wakeup-source;
+ };
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset>;
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ hdmi {
+ hdmi_con_en: hdmi-con-en {
+ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_reset: pcie-reset {
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ usb_host_pwr_en: usb-host-pwr-en {
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_otg0_pwr_en: usb-otg0-pwr-en {
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usbc0_int: usbc0-int {
+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&rng {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ full-pwr-cycle-in-suspend;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>;
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc_5v0_host>;
+ status = "okay";
+};
+
+&usb_drd1_dwc3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "rk3576-luckfox-core3576.dtsi"
+
+/ {
+ model = "Luckfox Omni3576 Carrier Board";
+ compatible = "luckfox,omni3576", "luckfox,core3576", "rockchip,rk3576";
+
+ aliases {
+ mmc1 = &sdmmc;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_green_pin>;
+
+ green_led: green-led {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&pinctrl {
+ leds {
+ led_green_pin: led-green-pin {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ no-sdio;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd.
+ * Copyright (c) 2025 John Clark <inindev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3576.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi M5";
+ compatible = "friendlyarm,nanopi-m5", "rockchip,rk3576";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ mmc0 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ hdmi-pwr-supply = <&vcc5v_hdmi_tx>;
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ usr_button: key-1 {
+ debounce-interval = <50>;
+ gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "user";
+ linux,code = <BTN_1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usr_button_l>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_sys: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>;
+ label = "sys";
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_sys_h>;
+ };
+
+ led1: led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+ label = "led1";
+ linux,default-trigger = "netdev";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led1_h>;
+ };
+
+ led2: led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>;
+ label = "led2";
+ linux,default-trigger = "netdev";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led2_h>;
+ };
+ };
+
+ usb3_port2_5v: regulator-usb3-port2-5v {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_host_pwren_h>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "usb3_port2_5v";
+ vin-supply = <&vcc5v0_sys_s5>;
+ };
+
+ vcc12v_dcin: regulator-vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-name = "vcc12v_dcin";
+ };
+
+ vcc3v3_m2_keym: regulator-vcc3v3-m2-keym {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pwren_h>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_m2_keym";
+ vin-supply = <&vcc5v0_sys_s5>;
+ };
+
+ vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwren_h>;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_sd_s0";
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_sys_s5";
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg0_pwren_h>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_usb_otg0";
+ vin-supply = <&vcc5v0_sys_s5>;
+ };
+
+ vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v_hdmi_tx";
+ vin-supply = <&vcc5v0_sys_s5>;
+ };
+
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ vin-supply = <&vcc5v0_sys_s5>;
+ };
+
+ vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-name = "vcc_2v0_pldo_s3";
+ vin-supply = <&vcc5v0_sys_s5>;
+ };
+
+ vcc_3v3_s0: regulator-vcc-3v3-s0 {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s0";
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_det_l>;
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "realtek,rt5616-codec";
+
+ simple-audio-card,routing =
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "IN1P", "Microphone Jack";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack";
+
+ simple-audio-card,codec {
+ sound-dai = <&rt5616>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&fspi1m1_pins {
+ /* gpio1_d5, gpio1_c4-c7 (clk, d0-d4) are for spi nor flash */
+ /* gpio1_d0-d4 muxed to sai2 audio functions */
+ rockchip,pins =
+ <1 RK_PD5 3 &pcfg_pull_none>,
+ <1 RK_PC4 3 &pcfg_pull_none>,
+ <1 RK_PC5 3 &pcfg_pull_none>,
+ <1 RK_PC6 3 &pcfg_pull_none>,
+ <1 RK_PC7 3 &pcfg_pull_none>;
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy0>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3_s3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð0m0_miim>,
+ <ð0m0_tx_bus2>,
+ <ð0m0_rx_bus2>,
+ <ð0m0_rgmii_clk>,
+ <ð0m0_rgmii_bus>;
+ status = "okay";
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3_s3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð1m0_miim>,
+ <ð1m0_tx_bus2>,
+ <ð1m0_rx_bus2>,
+ <ð1m0_rgmii_clk>,
+ <ð1m0_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdptxphy {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ pmic@23 {
+ compatible = "rockchip,rk806";
+ reg = <0x23>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-parent = <&gpio0>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys_s5>;
+ vcc2-supply = <&vcc5v0_sys_s5>;
+ vcc3-supply = <&vcc5v0_sys_s5>;
+ vcc4-supply = <&vcc5v0_sys_s5>;
+ vcc5-supply = <&vcc5v0_sys_s5>;
+ vcc6-supply = <&vcc5v0_sys_s5>;
+ vcc7-supply = <&vcc5v0_sys_s5>;
+ vcc8-supply = <&vcc5v0_sys_s5>;
+ vcc9-supply = <&vcc5v0_sys_s5>;
+ vcc10-supply = <&vcc5v0_sys_s5>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys_s5>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys_s5>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs1_slp: dvs1-slp-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs1_rst: dvs1-rst-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_slp: dvs2-slp-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs2_rst: dvs2-rst-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs2_dvs: dvs2-dvs-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun4";
+ };
+
+ rk806_dvs2_gpio: dvs2-gpio-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun5";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_slp: dvs3-slp-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs3_rst: dvs3-rst-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs3_dvs: dvs3-dvs-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun4";
+ };
+
+ rk806_dvs3_gpio: dvs3-gpio-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun5";
+ };
+
+ regulators {
+ vdd_cpu_big_s0: dcdc-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_cpu_big_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_npu_s0: dcdc-reg2 {
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_npu_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_gpu_s0: dcdc-reg5 {
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <400>;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_logic_s0: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <800000>;
+ regulator-name = "vdd_logic_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pldo2_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pldo2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdda_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdda_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v75_hdmi_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <837500>;
+ regulator-max-microvolt = <837500>;
+ regulator-name = "vdda0v75_hdmi_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdda_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ wakeup-source;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5m3_xfer>;
+ status = "okay";
+
+ rt5616: audio-codec@1b {
+ compatible = "realtek,rt5616";
+ reg = <0x1b>;
+ assigned-clocks = <&cru CLK_SAI2_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&cru CLK_SAI2_MCLKOUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&mdio0 {
+ rgmii_phy0: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_int>, <&gmac0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_int>, <&gmac1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_perstn>;
+ reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_m2_keym>;
+ status = "okay";
+};
+
+&pinctrl {
+ gmac {
+ gmac0_int: gmac0-int {
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ gmac0_rst: gmac0-rst {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ gmac1_int: gmac1-int {
+ rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ gmac1_rst: gmac1-rst {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ keys {
+ usr_button_l: usr-button-l {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ led_sys_h: led-sys-h {
+ rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ led1_h: led1-h {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ led2_h: led2-h {
+ rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie0_pwren_h: pcie0-pwren-h {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ pcie0_perstn: pcie0-perstn {
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc0_pwren_h: sdmmc0-pwren-h {
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sound {
+ hp_det_l: hp-det-l {
+ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb3_host_pwren_h: usb3-host-pwren-h {
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ usb_otg0_pwren_h: usb-otg0-pwren-h {
+ rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8_s0>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ no-mmc;
+ no-sdio;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_det>, <&sdmmc0_bus4>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc3v3_sd_s0>;
+ status = "okay";
+};
+
+&sfc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspi1m1_csn0>, <&fspi1m1_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ vcc-supply = <&vcc_1v8_s3>;
+ };
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg0>;
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&usb3_port2_5v>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usbdp_phy {
+ status = "okay";
+};
+
+&usb_drd0_dwc3 {
+ dr_mode = "otg";
+ extcon = <&u2phy0>;
+ status = "okay";
+};
+
+&usb_drd1_dwc3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
+
+&wdt {
+ status = "okay";
+};
};
};
+ rfkill {
+ compatible = "rfkill-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en_h>;
+ radio-type = "wlan";
+ shutdown-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+ };
+
leds: leds {
compatible = "gpio-leds";
pinctrl-names = "default";
};
};
- vcc_12v0_dcin: regulator-vcc-12v0-dcin {
+ vcc_5v0_dcin: regulator-vcc-5v0-dcin {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-name = "vcc_12v0_dcin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc_5v0_dcin";
};
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
vin-supply = <&vcc_5v0_sys>;
};
+ vcc_3v3_wifi: regulator-vcc-3v3-wifi {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_wifi_pwr>;
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_wifi";
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
vcc_5v0_device: regulator-vcc-5v0-device {
compatible = "regulator-fixed";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "vcc_5v0_device";
- vin-supply = <&vcc_12v0_dcin>;
+ vin-supply = <&vcc_5v0_sys>;
};
vcc_5v0_host: regulator-vcc-5v0-host {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "vcc5v0_host";
- vin-supply = <&vcc_5v0_device>;
+ vin-supply = <&vcc_5v0_sys>;
+ };
+
+ vcc_5v0_otg: regulator-vcc-5v0-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_pwren>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc5v0_otg";
+ vin-supply = <&vcc_5v0_sys>;
};
vcc_5v0_sys: regulator-vcc-5v0-sys {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "vcc_5v0_sys";
- vin-supply = <&vcc_12v0_dcin>;
+ vin-supply = <&vcc_5v0_dcin>;
};
};
+&combphy0_ps {
+ status = "okay";
+};
+
&combphy1_psu {
status = "okay";
};
};
};
+&hdmi_sound {
+ status = "okay";
+};
+
&hdptxphy {
status = "okay";
};
&mdio0 {
rgmii_phy0: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-id001c.c916";
reg = <0x1>;
clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+ assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+ assigned-clock-rates = <25000000>;
pinctrl-names = "default";
pinctrl-0 = <&rtl8211f_rst>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
- reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
};
};
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset>;
+ reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_pcie>;
+ status = "okay";
+};
+
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
pcie_pwren: pcie-pwren {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ pcie_reset: pcie-reset {
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
usb {
usb_host_pwren: usb-host-pwren {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ usb_otg_pwren: usb-otg-pwren {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
+
+ };
+ };
+
+ wifi {
+ usb_wifi_pwr: usb-wifi-pwr {
+ rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ wifi_en_h: wifi-en-h {
+ rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
+&sai6 {
+ status = "okay";
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
status = "okay";
};
+&u2phy0_otg {
+ phy-supply = <&vcc_5v0_otg>;
+ status = "okay";
+};
+
&u2phy1 {
status = "okay";
};
+&u2phy1_otg {
+ phy-supply = <&vcc_5v0_host>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-0 = <&uart0m0_xfer>;
status = "okay";
};
+&ufshc {
+ status = "okay";
+};
+
+&usbdp_phy {
+ status = "okay";
+};
+
+&usb_drd0_dwc3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_drd1_dwc3 {
dr_mode = "host";
status = "okay";
<&cru HCLK_VOP>,
<&cru DCLK_VP0>,
<&cru DCLK_VP1>,
- <&cru DCLK_VP2>;
+ <&cru DCLK_VP2>,
+ <&hdptxphy>;
clock-names = "aclk",
"hclk",
"dclk_vp0",
"dclk_vp1",
- "dclk_vp2";
+ "dclk_vp2",
+ "pll_hdmiphy0";
iommus = <&vop_mmu>;
power-domains = <&power RK3576_PD_VOP>;
rockchip,grf = <&sys_grf>;
status = "disabled";
};
+ sdio: mmc@2a320000 {
+ compatible = "rockchip,rk3576-dw-mshc";
+ reg = <0x0 0x2a320000 0x0 0x4000>;
+ clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <200000000>;
+ pinctrl-0 = <&sdmmc1m0_clk &sdmmc1m0_cmd &sdmmc1m0_bus4>;
+ pinctrl-names = "default";
+ power-domains = <&power RK3576_PD_SDGMAC>;
+ resets = <&cru SRST_H_SDIO>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
sdhci: mmc@2a330000 {
compatible = "rockchip,rk3576-dwcmshc", "rockchip,rk3588-dwcmshc";
reg = <0x0 0x2a330000 0x0 0x10000>;
reg = <0x0 0x2b000000 0x0 0x2000>;
clocks = <&cru CLK_PHY_REF_SRC>, <&cru PCLK_HDPTX_APB>;
clock-names = "ref", "apb";
+ #clock-cells = <0>;
resets = <&cru SRST_P_HDPTX_APB>, <&cru SRST_HDPTX_INIT>,
<&cru SRST_HDPTX_CMN>, <&cru SRST_HDPTX_LANE>;
reset-names = "apb", "init", "cmn", "lane";
compatible = "belling,bl24c16a", "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
+ read-only;
vcc-supply = <&vcc_3v3_pmu>;
};
};
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ wireless-bluetooth {
+ bt_reset_pin: bt-reset-pin {
+ rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_pin: bt-wake-pin {
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ bt_wake_host_irq: bt-wake-host-irq {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
};
&pwm1 {
status = "okay";
};
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&hym8563>;
+ clock-names = "lpo";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ device-wakeup-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_wake_host_irq &bt_wake_pin &bt_reset_pin>;
+ vbat-supply = <&vcc_3v3_s3>;
+ vddio-supply = <&vcc_1v8_s3>;
+ };
+};
+
&usbdp_phy1 {
status = "okay";
};
};
};
+&hdmi_receiver_cma {
+ status = "okay";
+};
+
+&hdmi_receiver {
+ hpd-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&hdptxphy0 {
status = "okay";
};
};
+ hdmirx {
+ hdmirx_hpd: hdmirx-5v-detection {
+ rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+&hdmi_receiver_cma {
+ status = "okay";
+};
+
+&hdmi_receiver {
+ hpd-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&hdptxphy0 {
status = "okay";
};
};
};
+ hdmirx {
+ hdmirx_hpd: hdmirx-5v-detection {
+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pcie {
pcie2_0_rst: pcie2-0-rst {
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Cherry Embedded Solutions GmbH
+ *
+ * Device Tree Overlay for the Ethernet Switch adapter for the Mezzanine
+ * connector on RK3588 Jaguar
+ * (manual: https://embedded.cherry.de/jaguar-ethernet-switch-user-manual/)
+ *
+ * This adapter has a KSZ9896 Ethernet Switch with 4 1GbE Ethernet connectors,
+ * two user controllable LEDs, and an M12 12-pin connector which exposes the
+ * following signals:
+ * - RS232/RS485 (max 250Kbps/500Kbps, RX pin1, TX pin2)
+ * - two digital inputs (pin4 routed to GPIO3_C5 on SoC, pin5 to GPIO4_B4)
+ * - two digital outputs (pin7 routed to GPIO3_D3 on SoC, pin8 to GPIO3_D1)
+ * - two analog inputs (pin10 to channel1 of ADS1015, pin11 to channel2)
+ *
+ * RK3588 Jaguar can be powered entirely through the adapter via the M8 3-pin
+ * connector (12-24V).
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+ aliases {
+ ethernet1 = "/ethernet@fe1c0000";
+ };
+
+ mezzanine-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_usr1_pin &led_usr2_pin>;
+
+ led-1 {
+ gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ label = "USR1";
+ };
+
+ led-2 {
+ gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ label = "USR2";
+ };
+ };
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rx_bus2
+ &gmac1_tx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus
+ ð1_pins>;
+ rx_delay = <0x0>;
+ tx_delay = <0x0>;
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&i2c1 {
+ #address-cells = <1>;
+ /*
+ * ADS1015 can handle high-speed (HS) mode (up to 3.4MHz) on I2C bus,
+ * but SoC can handle only up to 400kHz.
+ */
+ clock-frequency = <400000>;
+ #size-cells = <0>;
+ status = "okay";
+
+ adc@48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #address-cells = <1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PC7 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&adc_alert>;
+ pinctrl-names = "default";
+ #io-channel-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <5>; /* Single-ended between AIN1 and GND */
+ ti,datarate = <0>;
+ ti,gain = <5>;
+ };
+
+ channel@2 {
+ reg = <6>; /* Single-ended between AIN2 and GND */
+ ti,datarate = <0>;
+ ti,gain = <5>;
+ };
+ };
+
+ switch@5f {
+ compatible = "microchip,ksz9896";
+ reg = <0x5f>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; /* ETH_INTRP_N */
+ pinctrl-0 = <ð_reset_n ð_intrp_n>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; /* ETH_RESET */
+ microchip,synclko-disable; /* CLKO_25_125 only routed to TP1 */
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lan1: port@0 {
+ reg = <0>;
+ label = "ETH1";
+ };
+
+ lan2: port@1 {
+ reg = <1>;
+ label = "ETH2";
+ };
+
+ lan3: port@2 {
+ reg = <2>;
+ label = "ETH3";
+ };
+
+ lan4: port@3 {
+ reg = <3>;
+ label = "ETH4";
+ };
+
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac1>;
+ label = "CPU";
+ phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <2000>;
+ tx-internal-delay-ps = <2000>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ adc {
+ adc_alert: adc-alert-irq {
+ rockchip,pins =
+ <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ ethernet {
+ eth_intrp_n: eth-intrp-n {
+ rockchip,pins =
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ eth_reset_n: eth-reset-n {
+ rockchip,pins =
+ <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_usr1_pin: led-usr1-pin {
+ rockchip,pins =
+ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ led_usr2_pin: led-usr2-pin {
+ rockchip,pins =
+ <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&uart9 {
+ /* GPIO3_D0/EN_RS485_MODE for switching between RS232 and RS485 */
+ pinctrl-0 = <&uart9m2_xfer &uart9m2_rtsn>;
+ pinctrl-names = "default";
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
+#include "rk8xx.h"
#include "rk3588.dtsi"
/ {
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
+ rockchip,reset-mode = <RK806_RESTART>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
spi-max-frequency = <104000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
+ vcc-supply = <&vcc_1v8_s3>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&hp_detect>;
simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
- simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
simple-audio-card,widgets =
"Microphone", "Onboard Microphone",
"Microphone", "Microphone Jack",
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc_1v8_s3>;
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi0-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
+ hdmi1-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi1_con_in: endpoint {
+ remote-endpoint = <&hdmi1_out_con>;
+ };
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 120 150 180 210 240 255>;
+ fan-supply = <&vcc5v0_sys>;
+ pwms = <&pwm1 0 50000 0>;
+ #cooling-cells = <2>;
+ };
+
+ rfkill-bt {
+ compatible = "rfkill-gpio";
+ label = "rfkill-m2-bt";
+ radio-type = "bluetooth";
+ shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc3v3_pcie2x1l0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ status = "disabled";
+ };
+
+ vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie2x1l2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3_vcc3v3_en>;
+ regulator-name = "vcc3v3_pcie30";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_host: regulator-vcc5v0-host {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&hdmi0 {
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi0_con_in>;
+ };
+};
+
+&hdmi0_sound {
+ status = "okay";
+};
+
+&hdmi1 {
+ pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
+ &hdmim1_tx1_scl &hdmim1_tx1_sda>;
+ status = "okay";
+};
+
+&hdmi1_in {
+ hdmi1_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_hdmi1>;
+ };
+};
+
+&hdmi1_out {
+ hdmi1_out_con: endpoint {
+ remote-endpoint = <&hdmi1_con_in>;
+ };
+};
+
+&hdmi1_sound {
+ status = "okay";
+};
+
+&hdmi_receiver_cma {
+ status = "okay";
+};
+
+&hdmi_receiver {
+ pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+ pinctrl-names = "default";
+};
+
+&hdptxphy0 {
+ status = "okay";
+};
+
+&hdptxphy1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&i2s5_8ch {
+ status = "okay";
+};
+
+&i2s6_8ch {
+ status = "okay";
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ trips {
+ package_fan0: package-fan0 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&package_fan0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map1 {
+ trip = <&package_fan1>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&pcie2x1l0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_rst>;
+ reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+ status = "okay";
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_rst>;
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3_rst>;
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
+ status = "okay";
+};
+
+&pd_gpu {
+ domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie2 {
+ pcie2_0_rst: pcie2-0-rst {
+ rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_2_rst: pcie2-2-rst {
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie3 {
+ pcie3_rst: pcie3-rst {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&avcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&sdmmc {
+ max-frequency = <200000000>;
+ no-sdio;
+ no-mmc;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ vcc-supply = <&vcc_3v3_s3>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ num-cs = <1>;
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ spi-max-frequency = <1000000>;
+ reg = <0x0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ /* connected to USB hub, which is powered by vcc5v0_sys */
+ phy-supply = <&vcc5v0_sys>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&usbdp_phy1 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
+
+&vp1 {
+ vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+ remote-endpoint = <&hdmi1_in_vp1>;
+ };
+};
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
-#include "rk3588.dtsi"
+#include "rk3588-rock-5b-5bp-5t.dtsi"
/ {
- aliases {
- mmc0 = &sdhci;
- mmc1 = &sdmmc;
- mmc2 = &sdio;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
analog-sound {
compatible = "audio-graph-card";
label = "rk3588-es8316";
pinctrl-0 = <&hp_detect>;
};
- hdmi0-con {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi0_con_in: endpoint {
- remote-endpoint = <&hdmi0_out_con>;
- };
- };
- };
-
- hdmi1-con {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi1_con_in: endpoint {
- remote-endpoint = <&hdmi1_out_con>;
- };
- };
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
};
};
- fan: pwm-fan {
- compatible = "pwm-fan";
- cooling-levels = <0 120 150 180 210 240 255>;
- fan-supply = <&vcc5v0_sys>;
- pwms = <&pwm1 0 50000 0>;
- #cooling-cells = <2>;
- };
-
rfkill {
compatible = "rfkill-gpio";
label = "rfkill-m2-wlan";
radio-type = "wlan";
shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
};
-
- rfkill-bt {
- compatible = "rfkill-gpio";
- label = "rfkill-m2-bt";
- radio-type = "bluetooth";
- shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
- };
-
- vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_0_vcc3v3_en>;
- regulator-name = "vcc3v3_pcie2x1l0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <50000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_pcie2x1l2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <5000>;
- vin-supply = <&vcc_3v3_s3>;
- };
-
- vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie3_vcc3v3_en>;
- regulator-name = "vcc3v3_pcie30";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <5000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_host: regulator-vcc5v0-host {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_host";
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_sys: regulator-vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc_1v1_nldo_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&combphy0_ps {
- status = "okay";
-};
-
-&combphy1_ps {
- status = "okay";
-};
-
-&combphy2_psu {
- status = "okay";
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_big0_s0>;
-};
-
-&cpu_b2 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_b3 {
- cpu-supply = <&vdd_cpu_big1_s0>;
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gpu {
- mali-supply = <&vdd_gpu_s0>;
- status = "okay";
-};
-
-&hdmi0 {
- status = "okay";
-};
-
-&hdmi0_in {
- hdmi0_in_vp0: endpoint {
- remote-endpoint = <&vp0_out_hdmi0>;
- };
-};
-
-&hdmi0_out {
- hdmi0_out_con: endpoint {
- remote-endpoint = <&hdmi0_con_in>;
- };
-};
-
-&hdmi0_sound {
- status = "okay";
-};
-
-&hdmi1 {
- pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
- &hdmim1_tx1_scl &hdmim1_tx1_sda>;
- status = "okay";
-};
-
-&hdmi1_in {
- hdmi1_in_vp1: endpoint {
- remote-endpoint = <&vp1_out_hdmi1>;
- };
-};
-
-&hdmi1_out {
- hdmi1_out_con: endpoint {
- remote-endpoint = <&hdmi1_con_in>;
- };
-};
-
-&hdmi1_sound {
- status = "okay";
-};
-
-&hdmi_receiver_cma {
- status = "okay";
};
&hdmi_receiver {
hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&hdptxphy0 {
- status = "okay";
-};
-
-&hdptxphy1 {
status = "okay";
};
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0m2_xfer>;
- status = "okay";
-
- vdd_cpu_big0_s0: regulator@42 {
- compatible = "rockchip,rk8602";
- reg = <0x42>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big0_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_big1_s0: regulator@43 {
- compatible = "rockchip,rk8603", "rockchip,rk8602";
- reg = <0x43>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big1_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <1050000>;
- regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c6 {
- status = "okay";
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
- wakeup-source;
- };
-};
-
-&i2c7 {
- status = "okay";
-
- es8316: audio-codec@11 {
- compatible = "everest,es8316";
- reg = <0x11>;
- clocks = <&cru I2S0_8CH_MCLKOUT>;
- clock-names = "mclk";
- assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
- assigned-clock-rates = <12288000>;
- #sound-dai-cells = <0>;
-
- port {
- es8316_p0_0: endpoint {
- remote-endpoint = <&i2s0_8ch_p0_0>;
- };
- };
- };
-};
-
-&i2s0_8ch {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_lrck
- &i2s0_mclk
- &i2s0_sclk
- &i2s0_sdi0
- &i2s0_sdo0>;
- status = "okay";
-
- i2s0_8ch_p0: port {
- i2s0_8ch_p0_0: endpoint {
- dai-format = "i2s";
- mclk-fs = <256>;
- remote-endpoint = <&es8316_p0_0>;
- };
- };
-};
-
-&i2s5_8ch {
- status = "okay";
-};
-
-&i2s6_8ch {
- status = "okay";
-};
-
-&package_thermal {
- polling-delay = <1000>;
-
- trips {
- package_fan0: package-fan0 {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- package_fan1: package-fan1 {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&package_fan0>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
- };
-
- map1 {
- trip = <&package_fan1>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&pcie2x1l0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_0_rst>;
- reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
- status = "okay";
-};
-
-&pcie2x1l2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_2_rst>;
- reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
- status = "okay";
-};
-
-&pcie30phy {
- status = "okay";
-};
-
-&pcie3x4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie3_rst>;
- reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_pcie30>;
- status = "okay";
-};
-
-&pd_gpu {
- domain-supply = <&vdd_gpu_s0>;
-};
-
&pinctrl {
hdmirx {
hdmirx_hpd: hdmirx-5v-detection {
};
};
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
leds {
led_rgb_b: led-rgb-b {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
- sound {
- hp_detect: hp-detect {
- rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
pcie2 {
- pcie2_0_rst: pcie2-0-rst {
- rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
-
- pcie2_2_rst: pcie2-2-rst {
- rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
};
- pcie3 {
- pcie3_rst: pcie3-rst {
- rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie3_vcc3v3_en: pcie3-vcc3v3-en {
- rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&avcc_1v8_s0>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- no-sdio;
- no-sd;
- non-removable;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- status = "okay";
-};
-
-&sdmmc {
- max-frequency = <200000000>;
- no-sdio;
- no-mmc;
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
- disable-wp;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc_3v3_s3>;
- vqmmc-supply = <&vccio_sd_s0>;
- status = "okay";
-};
-
-&sfc {
- pinctrl-names = "default";
- pinctrl-0 = <&fspim2_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <1>;
- vcc-supply = <&vcc_3v3_s3>;
- };
-};
-
-&spi2 {
- status = "okay";
- assigned-clocks = <&cru CLK_SPI2>;
- assigned-clock-rates = <200000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
- num-cs = <1>;
-
- pmic@0 {
- compatible = "rockchip,rk806";
- spi-max-frequency = <1000000>;
- reg = <0x0>;
-
- interrupt-parent = <&gpio0>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
- <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-
- system-power-controller;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc5v0_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc_2v0_pldo_s3>;
- vcc12-supply = <&vcc5v0_sys>;
- vcc13-supply = <&vcc_1v1_nldo_s3>;
- vcc14-supply = <&vcc_1v1_nldo_s3>;
- vcca-supply = <&vcc5v0_sys>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- rk806_dvs1_null: dvs1-null-pins {
- pins = "gpio_pwrctrl1";
- function = "pin_fun0";
- };
-
- rk806_dvs2_null: dvs2-null-pins {
- pins = "gpio_pwrctrl2";
- function = "pin_fun0";
- };
-
- rk806_dvs3_null: dvs3-null-pins {
- pins = "gpio_pwrctrl3";
- function = "pin_fun0";
- };
-
- regulators {
- vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_gpu_s0";
- regulator-enable-ramp-delay = <400>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_cpu_lit_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_log_s0: dcdc-reg3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <750000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_log_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <550000>;
- regulator-max-microvolt = <950000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_vdenc_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_ddr_s0: dcdc-reg5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <900000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_ddr_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- vdd2_ddr_s3: dcdc-reg6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vdd2_ddr_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_2v0_pldo_s3: dcdc-reg7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vdd_2v0_pldo_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <2000000>;
- };
- };
-
- vcc_3v3_s3: dcdc-reg8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_3v3_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vddq_ddr_s0: dcdc-reg9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vddq_ddr_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s3: dcdc-reg10 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avcc_1v8_s0: pldo-reg1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "avcc_1v8_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s0: pldo-reg2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- avdd_1v2_s0: pldo-reg3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-name = "avdd_1v2_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v3_s0: pldo-reg4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vcc_3v3_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd_s0: pldo-reg5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-ramp-delay = <12500>;
- regulator-name = "vccio_sd_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- pldo6_s3: pldo-reg6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "pldo6_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_0v75_s3: nldo-reg1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-name = "vdd_0v75_s3";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <750000>;
- };
- };
-
- vdd_ddr_pll_s0: nldo-reg2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-name = "vdd_ddr_pll_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <850000>;
- };
- };
-
- avdd_0v75_s0: nldo-reg3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-name = "avdd_0v75_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v85_s0: nldo-reg4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- regulator-name = "vdd_0v85_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_0v75_s0: nldo-reg5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-name = "vdd_0v75_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
-&tsadc {
- status = "okay";
-};
-
-&uart2 {
- pinctrl-0 = <&uart2m0_xfer>;
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&u2phy2 {
- status = "okay";
-};
-
-&u2phy2_host {
- /* connected to USB hub, which is powered by vcc5v0_sys */
- phy-supply = <&vcc5v0_sys>;
- status = "okay";
-};
-
-&u2phy3 {
- status = "okay";
-};
-
-&u2phy3_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&usbdp_phy1 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usb_host1_xhci {
- dr_mode = "host";
- status = "okay";
-};
-
&usb_host2_xhci {
status = "okay";
};
-&vop {
- status = "okay";
-};
-
-&vop_mmu {
+&vcc3v3_pcie2x1l0 {
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_vcc3v3_en>;
status = "okay";
};
-
-&vp0 {
- vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
- reg = <ROCKCHIP_VOP2_EP_HDMI0>;
- remote-endpoint = <&hdmi0_in_vp0>;
- };
-};
-
-&vp1 {
- vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
- reg = <ROCKCHIP_VOP2_EP_HDMI1>;
- remote-endpoint = <&hdmi1_in_vp1>;
- };
-};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588-rock-5b-5bp-5t.dtsi"
+
+/ {
+ model = "Radxa ROCK 5T";
+ compatible = "radxa,rock-5t", "rockchip,rk3588";
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ label = "rk3588-es8316";
+
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+
+ dais = <&i2s0_8ch_p0>;
+ hp-det-gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_rgb_b>;
+
+ led_rgb_b {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ rfkill {
+ compatible = "rfkill-gpio";
+ label = "rfkill-m2-wlan";
+ radio-type = "wlan";
+ shutdown-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc3v3_pcie2x1l1: regulator-vcc3v3-pcie2x1l2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie2x1l1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+};
+
+&hdmi_receiver {
+ hpd-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie2x1l1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_1_rst>;
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l1>;
+ status = "okay";
+};
+
+&pcie30phy {
+ data-lanes = <1 1 2 2>;
+};
+
+&pcie3x2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x2_rst>;
+ reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
+ status = "okay";
+};
+
+&pcie3x4 {
+ num-lanes = <2>;
+};
+
+&pinctrl {
+ hdmirx {
+ hdmirx_hpd: hdmirx-5v-detection {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_rgb_b: led-rgb-b {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie2 {
+ pcie2_1_rst: pcie2-1-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie3 {
+ pcie3x2_rst: pcie3x2-rst {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&vcc3v3_pcie2x1l0 {
+ gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+ status = "okay";
+};
+
+&vcc5v0_host {
+ enable-active-high;
+ gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk8xx.h"
#include "rk3588.dtsi"
/ {
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
vcca-supply = <&vcc5v0_sys>;
+ rockchip,reset-mode = <RK806_RESTART>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
regulators {
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
- /*
- * RK3588's GPU power domain cannot be enabled
- * without this regulator active, but it
- * doesn't have to be on when the GPU PD is
- * disabled. Because the PD binding does not
- * currently allow us to express this
- * relationship, we have no choice but to do
- * this instead:
- */
- regulator-always-on;
-
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
compatible = "operating-points-v2";
opp-shared;
- opp-1200000000{
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <750000 750000 950000>;
clock-latency-ns = <40000>;
compatible = "operating-points-v2";
opp-shared;
- opp-1200000000{
+ opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <750000 750000 950000>;
clock-latency-ns = <40000>;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"
cpu-supply = <&vdd_cpu_big1_s0>;
};
+&dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "huiling,hl055fhav028c", "himax,hx8399c";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc3v3_lcd0_n>;
+ pinctrl-0 = <&lcd_rst>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+ rotation = <90>;
+ vcc-supply = <&vcc3v3_lcd0_n>;
+
+ port {
+ mipi_panel_in: endpoint {
+ remote-endpoint = <&dsi0_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi0_in {
+ dsi0_in_vp3: endpoint {
+ remote-endpoint = <&vp3_out_dsi0>;
+ };
+};
+
+&dsi0_out {
+ dsi0_out_panel: endpoint {
+ remote-endpoint = <&mipi_panel_in>;
+ };
+};
+
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
status = "okay";
};
+&mipidcphy0 {
+ status = "okay";
+};
+
&package_thermal {
polling-delay = <1000>;
};
};
- lcd_bl_en {
+ lcd {
lcd_bl_en: lcd-bl-en {
rockchip,pins =
<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
+
+ lcd_rst: lcd-rst {
+ rockchip,pins =
+ <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
pcie-pins {
shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
};
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+ reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+ remote-endpoint = <&dsi0_in_vp3>;
+ };
+};
simple-audio-card,bitclock-master = <&masterdai>;
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&masterdai>;
- simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,pin-switches = "Headphones";
simple-audio-card,routing =
"Headphones", "LOUT1",
"Headphones", "ROUT1",
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "Firefly Station M3";
+ compatible = "firefly,rk3588s-roc-pc", "rockchip,rk3588s";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,name = "rockchip,es8388";
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,pin-switches = "Headphones";
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones";
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out_con>;
+ };
+ };
+ };
+
+ fan: fan {
+ compatible = "pwm-fan";
+ cooling-levels = <60 100 140 160 185 220 255>;
+ fan-supply = <&vcc12v_dcin>;
+ pwms = <&pwm11 0 50000 1>;
+ #cooling-cells = <2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ vcc12v_dcin: regulator-vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vbus5v0_typec: regulator-vbus5v0-typec {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec5v_pwren>;
+ regulator-name = "vbus5v0_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc3v3_pcie20";
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_host: regulator-vcc5v0-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: regulator-vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&hdmi0 {
+ status = "okay";
+};
+
+&hdmi0_in {
+ hdmi0_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi0>;
+ };
+};
+
+&hdmi0_out {
+ hdmi0_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdptxphy0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2m0_xfer>;
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388", "everest,es8328";
+ reg = <0x11>;
+ clocks = <&cru I2S1_8CH_MCLKOUT>;
+ AVDD-supply = <&vcc_3v3_s0>;
+ DVDD-supply = <&vcc_1v8_s0>;
+ HPVDD-supply = <&vcc_3v3_s0>;
+ PVDD-supply = <&vcc_3v3_s0>;
+ assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8211f_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1l1 {
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie20>;
+ status = "okay";
+};
+
+&pd_gpu {
+ domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ headphone {
+ hp_detect: hp-detect {
+ rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_pins: led-pins {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
+ <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtl8211 {
+ rtl8211f_rst: rtl8211f-rst {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ typec5v_pwren: typec5v-pwren {
+ rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm11 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm11m3_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: dcdc-reg1 {
+ regulator-name = "vdd_gpu_s0";
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg2 {
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-name = "vdd_log_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: dcdc-reg4 {
+ regulator-name = "vdd_vdenc_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-name = "vdd_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
+ regulator-name = "vdd2_ddr_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1100000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-name = "vcc_3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-name = "vddq_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-name = "vcc_1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-name = "avcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-name = "avdd_1v2_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-name = "vcc_3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-name = "vccio_sd_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-name = "pldo6_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-name = "vdd_0v75_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-name = "vdd_ddr_pll_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-name = "avdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-name = "vdd_0v85_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-name = "vdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-0 = <&uart7m2_xfer>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&u2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi0_in_vp0>;
+ };
+};
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */
+/*
+ * Device Tree defines for Rockchip RK8xx PMICs
+ *
+ * Copyright 2025 Cherry Embedded Solutions GmbH
+ *
+ * Author: Quentin Schulz <quentin.schulz@cherry.de>
+ */
+
+#ifndef _DT_MFD_ROCKCHIP_RK8XX_H
+#define _DT_MFD_ROCKCHIP_RK8XX_H
+
+/* For use with rockchip,reset-mode property */
+#define RK806_RESTART 0
+#define RK806_RESET 1
+#define RK806_RESET_NOTIFY 2
+
+#endif
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "sg2000-milkv-duo-module-01.dtsi"
+
+/ {
+ model = "Milk-V Duo Module 01 Evaluation Board";
+ compatible = "milkv,duo-module-01-evb", "milkv,duo-module-01", "sophgo,sg2000";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&pinctrl {
+ sdhci0_cfg: sdhci0-cfg {
+ sdhci0-cd-pins {
+ pinmux = <PINMUX(PIN_SD0_CD, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <10800>;
+ power-source = <3300>;
+ };
+
+ sdhci0-clk-pins {
+ pinmux = <PINMUX(PIN_SD0_CLK, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <16100>;
+ power-source = <3300>;
+ };
+
+ sdhci0-cmd-pins {
+ pinmux = <PINMUX(PIN_SD0_CMD, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <10800>;
+ power-source = <3300>;
+ };
+
+ sdhci0-data-pins {
+ pinmux = <PINMUX(PIN_SD0_D0, 0)>,
+ <PINMUX(PIN_SD0_D1, 0)>,
+ <PINMUX(PIN_SD0_D2, 0)>,
+ <PINMUX(PIN_SD0_D3, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <10800>;
+ power-source = <3300>;
+ };
+ };
+
+ uart0_cfg: uart0-cfg {
+ uart0-pins {
+ pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+ <PINMUX(PIN_UART0_RX, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <10800>;
+ power-source = <3300>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <4>;
+ no-1-8-v;
+ no-mmc;
+ no-sdio;
+ disable-wp;
+ pinctrl-0 = <&sdhci0_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include <dt-bindings/pinctrl/pinctrl-sg2000.h>
+#include "sg2000.dtsi"
+
+/ {
+ model = "Milk-V Duo Module 01";
+ compatible = "milkv,duo-module-01", "sophgo,sg2000";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+};
+
+&osc {
+ clock-frequency = <25000000>;
+};
+
+&emmc {
+ bus-width = <4>;
+ no-1-8-v;
+ cap-mmc-hw-reset;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+/* Wi-Fi */
+&sdhci1 {
+ bus-width = <4>;
+ cap-sdio-irq;
+ no-mmc;
+ no-sd;
+ non-removable;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI (nr)
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/sophgo/cv180x.dtsi>
+#include <riscv/sophgo/cv181x.dtsi>
+
+/ {
+ compatible = "sophgo,sg2000";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x20000>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512MiB */
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ cpu_on = <0xc4000003>;
+ cpu_off = <0x84000002>;
+ };
+
+ soc {
+ gic: interrupt-controller@1f01000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x01f01000 0x1000>,
+ <0x01f02000 0x2000>;
+ };
+
+ pinctrl: pinctrl@3001000 {
+ compatible = "sophgo,sg2000-pinctrl";
+ reg = <0x03001000 0x1000>,
+ <0x05027000 0x1000>;
+ reg-names = "sys", "rtc";
+ };
+
+ clk: clock-controller@3002000 {
+ compatible = "sophgo,sg2000-clk";
+ reg = <0x03002000 0x1000>;
+ clocks = <&osc>;
+ #clock-cells = <1>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ always-on;
+ clock-frequency = <25000000>;
+ };
+};
};
};
+ pwm3_pins_a: pwm3-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 15, AF7)>; /* TIM3_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm3_sleep_pins_a: pwm3-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 15, ANALOG)>; /* TIM3_CH2 */
+ };
+ };
+
+ pwm8_pins_a: pwm8-0 {
+ pins {
+ pinmux = <STM32_PINMUX('J', 5, AF8)>, /* TIM8_CH1 */
+ <STM32_PINMUX('J', 4, AF8)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_sleep_pins_a: pwm8-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('J', 5, ANALOG)>, /* TIM8_CH1 */
+ <STM32_PINMUX('J', 4, ANALOG)>; /* TIM8_CH4 */
+ };
+ };
+
+ pwm12_pins_a: pwm12-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 11, AF9)>; /* TIM12_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_sleep_pins_a: pwm12-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 11, ANALOG)>; /* TIM12_CH2 */
+ };
+ };
+
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
};
};
+ tim10_counter_pins_a: tim10-counter-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 9, AF9)>; /* TIM10_CH1 */
+ bias-disable;
+ };
+ };
+
+ tim10_counter_sleep_pins_a: tim10-counter-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* TIM10_CH1 */
+ bias-disable;
+ };
+ };
+
usart2_pins_a: usart2-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
- always-on;
+ arm,no-tick-in-suspend;
};
soc@0 {
#access-controller-cells = <1>;
ranges;
+ timers2: timer@40000000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40000000 0x400>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM2>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 1>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ timers3: timer@40010000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM3>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 2>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ timers4: timer@40020000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40020000 0x400>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM4>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 3>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
+ timers5: timer@40030000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40030000 0x400>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM5>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 4>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
+ timers6: timer@40040000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40040000 0x400>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM6>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 5>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ timer@5 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timers7: timer@40050000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40050000 0x400>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM7>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 6>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ timer@6 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timer@40060000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40060000 0x400>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM12>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 10>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timer@40070000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40070000 0x400>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM13>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 11>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@12 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <12>;
+ status = "disabled";
+ };
+ };
+
+ timers14: timer@40080000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40080000 0x400>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM14>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 12>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@13 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <13>;
+ status = "disabled";
+ };
+ };
+
lptimer1: timer@40090000 {
compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
reg = <0x40090000 0x400>;
status = "disabled";
};
+ timers10: timer@401c0000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x401c0000 0x400>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM10>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 8>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@9 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <9>;
+ status = "disabled";
+ };
+ };
+
+ timers11: timer@401d0000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x401d0000 0x400>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM11>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 9>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@10 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <10>;
+ status = "disabled";
+ };
+ };
+
+ timers1: timer@40200000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40200000 0x400>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "brk", "up", "trg-com", "cc";
+ clocks = <&rcc CK_KER_TIM1>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 0>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timer@40210000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40210000 0x400>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "brk", "up", "trg-com", "cc";
+ clocks = <&rcc CK_KER_TIM8>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 7>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
usart6: serial@40220000 {
compatible = "st,stm32h7-uart";
reg = <0x40220000 0x400>;
status = "disabled";
};
+ timers15: timer@40250000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40250000 0x400>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM15>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 13>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@14 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <14>;
+ status = "disabled";
+ };
+ };
+
+ timers16: timer@40260000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40260000 0x400>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM16>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 14>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@15 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <15>;
+ status = "disabled";
+ };
+ };
+
+ timers17: timer@40270000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40270000 0x400>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global";
+ clocks = <&rcc CK_KER_TIM17>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 15>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@16 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <16>;
+ status = "disabled";
+ };
+ };
+
spi5: spi@40280000 {
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ timers20: timer@40320000 {
+ compatible = "st,stm32mp25-timers";
+ reg = <0x40320000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "brk", "up", "trg-com", "cc";
+ clocks = <&rcc CK_KER_TIM20>;
+ clock-names = "int";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ access-controllers = <&rifsc 16>;
+ power-domains = <&CLUSTER_PD>;
+ status = "disabled";
+
+ counter {
+ compatible = "st,stm32mp25-timer-counter";
+ status = "disabled";
+ };
+
+ pwm {
+ compatible = "st,stm32mp25-pwm";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ timer@19 {
+ compatible = "st,stm32mp25-timer-trigger";
+ reg = <19>;
+ status = "disabled";
+ };
+ };
+
usart1: serial@40330000 {
compatible = "st,stm32h7-uart";
reg = <0x40330000 0x400>;
st,bank-ioport = <11>;
status = "disabled";
};
-
};
exti2: interrupt-controller@46230000 {
status = "disabled";
};
+&timers3 {
+ status = "disabled";
+ counter {
+ status = "okay";
+ };
+ pwm {
+ pinctrl-0 = <&pwm3_pins_a>;
+ pinctrl-1 = <&pwm3_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@2 {
+ status = "okay";
+ };
+};
+
+&timers8 {
+ status = "disabled";
+ counter {
+ status = "okay";
+ };
+ pwm {
+ pinctrl-0 = <&pwm8_pins_a>;
+ pinctrl-1 = <&pwm8_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@7 {
+ status = "okay";
+ };
+};
+
+&timers10 {
+ status = "disabled";
+ counter {
+ pinctrl-0 = <&tim10_counter_pins_a>;
+ pinctrl-1 = <&tim10_counter_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+};
+
+&timers12 {
+ status = "disabled";
+ counter {
+ status = "okay";
+ };
+ pwm {
+ pinctrl-0 = <&pwm12_pins_a>;
+ pinctrl-1 = <&pwm12_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@11 {
+ status = "okay";
+ };
+};
+
&usart2 {
pinctrl-names = "default", "idle", "sleep";
pinctrl-0 = <&usart2_pins_a>;
};
&main_pmx0 {
+ main_mmc0_pins_default: main-mmc0-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */
+ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */
+ AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */
+ AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */
+ AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */
+ AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */
+ AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */
+ AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */
+ AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */
+ AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */
+ >;
+ };
+
vddshv_sdio_pins_default: vddshv-sdio-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
};
};
+&sdhci0 {
+ bootph-all;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ status = "okay";
+};
+
&sdhci1 {
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vddshv_sdio>;
clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
clock-names = "clk_ahb", "clk_xin";
bus-width = <8>;
- mmc-ddr-1_8v;
mmc-hs200-1_8v;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
/* Verdin I2C_2_DSI */
pinctrl_i2c2: main-i2c2-default-pins {
pinctrl-single,pins = <
- AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */
- AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */
+ AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */
+ AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */
>;
};
/* Verdin I2C_4_CSI */
pinctrl_i2c3: main-i2c3-default-pins {
pinctrl-single,pins = <
- AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
- AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
+ AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
+ AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
>;
};
/* Verdin I2C_3_HDMI */
pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
pinctrl-single,pins = <
- AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */
- AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */
+ AM62X_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */
+ AM62X_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */
>;
};
};
&main_pmx0 {
+ main_mmc0_pins_default: main-mmc0-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+ AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+ AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+ AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+ AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+ AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+ AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+ AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+ AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+ >;
+ };
+
main_rgmii2_pins_default: main-rgmii2-default-pins {
bootph-all;
pinctrl-single,pins = <
};
};
+&sdhci0 {
+ bootph-all;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ status = "okay";
+};
+
&sdhci1 {
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vdd_sd_dv>;
compatible = "ti,am654-phy-gmii-sel";
reg = <0x4044 0x8>;
#phy-cells = <1>;
+ bootph-all;
};
epwm_tbclk: clock-controller@4130 {
#mbox-cells = <1>;
interrupt-names = "rx_012";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ bootph-all;
};
inta_main_dmss: interrupt-controller@48000000 {
ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+ bootph-all;
};
main_pktdma: dma-controller@485c0000 {
"ring", "tchan", "rchan", "rflow";
msi-parent = <&inta_main_dmss>;
#dma-cells = <2>;
+ bootph-all;
+
ti,sci = <&dmsc>;
ti,sci-dev-id = <30>;
ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
+ bootph-all;
};
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
+ bootph-all;
};
k3_reset: reset-controller {
compatible = "ti,sci-reset";
#reset-cells = <2>;
+ bootph-all;
};
};
* firmware on non-MPU processors
*/
status = "disabled";
+ bootph-all;
};
main_pmx0: pinctrl@f4000 {
assigned-clock-parents = <&k3_clks 36 3>;
power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
ti,timer-pwm;
+ bootph-all;
};
main_timer1: timer@2410000 {
interrupt-names = "host", "peripheral";
maximum-speed = "high-speed";
dr_mode = "otg";
+ bootph-all;
snps,usb2-gadget-lpm-disable;
snps,usb2-lpm-disable;
};
phys = <&phy_gmii_sel 1>;
mac-address = [00 00 00 00 00 00];
ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
+ bootph-all;
};
cpsw_port2: port@2 {
clocks = <&k3_clks 13 0>;
clock-names = "fck";
bus_freq = <1000000>;
+ bootph-all;
};
cpts@3d000 {
chipid: chipid@14 {
compatible = "ti,am654-chipid";
reg = <0x14 0x4>;
+ bootph-all;
};
opp_efuse_table: syscon@18 {
reg = <0 0x100>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ bootph-pre-ram;
};
};
/* 4G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
<0x00000008 0x80000000 0x00000000 0x80000000>;
+ bootph-all;
};
reserved-memory {
regulator-boot-on;
enable-active-high;
gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+ bootph-all;
};
vcc_3v3_sys: regulator-4 {
AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
>;
+ bootph-all;
};
main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
- AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
- AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
+ AM62AX_IOPAD(0x01ac, PIN_INPUT, 2) /* (B21) MCASP0_AFSR.UART1_RXD */
+ AM62AX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A21) MCASP0_ACLKR.UART1_TXD */
AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
>;
AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
>;
+ bootph-all;
};
main_i2c2_pins_default: main-i2c2-default-pins {
AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
>;
+ bootph-all;
};
usr_led_pins_default: usr-led-default-pins {
AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
>;
+ bootph-all;
};
main_rgmii1_pins_default: main-rgmii1-default-pins {
AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
>;
+ bootph-all;
};
main_mcasp1_pins_default: main-mcasp1-default-pins {
#interrupt-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+ bootph-all;
gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
"BT_EN_SOC", "MMC1_SD_EN",
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
+ bootph-all;
};
&main_gpio0 {
status = "okay";
+ bootph-all;
};
&main_gpio1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
+ bootph-all;
};
/* Main UART1 is used for TIFS firmware logs */
pinctrl-0 = <&main_rgmii1_pins_default>;
};
+&phy_gmii_sel {
+ bootph-all;
+};
+
&cpsw_port1 {
status = "okay";
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
+ bootph-all;
};
&cpsw_port2 {
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
+ bootph-all;
};
};
&main_rti4 {
status = "reserved";
};
+
+&fss {
+ status = "okay";
+};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ospi0_pins_default>;
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <2>;
+ bootph-all;
+ };
+};
+
+&main_pmx0 {
+ ospi0_pins_default: ospi0-default-pins {
+ bootph-all;
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+ AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+ AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+ AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+ AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+ AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+ AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+ AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+ AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+ AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+ AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * AM62D2 EVM: https://www.ti.com/lit/zip/sprcal5
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am62d2.dtsi"
+
+/ {
+ compatible = "ti,am62d2-evm", "ti,am62d2";
+ model = "Texas Instruments AM62D2 EVM";
+
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ rtc0 = &wkup_rtc0;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ };
+
+ chosen {
+ stdout-path = &main_uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 4G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000000 0x80000000>;
+ bootph-all;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* global cma region */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x00 0x2000000>;
+ alloc-ranges = <0x00 0xc0000000 0x00 0x2000000>;
+ linux,cma-default;
+ };
+
+ secure_tfa_ddr: tfa@80000000 {
+ reg = <0x00 0x80000000 0x00 0x80000>;
+ no-map;
+ };
+
+ c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99800000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: c7x-memory@99900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c800000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0xf00000>;
+ no-map;
+ bootph-pre-ram;
+ };
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0000000 0x00 0x01000000>;
+ no-map;
+ };
+ };
+
+ opp-table {
+ /* Requires VDD_CORE at 0v85 */
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ clock-latency-ns = <6000000>;
+ };
+ };
+
+ vout_pd: regulator-0 {
+ /* TPS65988 PD CONTROLLER OUTPUT */
+ compatible = "regulator-fixed";
+ regulator-name = "vout_pd";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vmain_pd: regulator-1 {
+ /* Output of TPS22811 */
+ compatible = "regulator-fixed";
+ regulator-name = "vmain_pd";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vout_pd>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vcc_5v0: regulator-2 {
+ /* Output of TPS630702RNMR */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vmain_pd>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vcc_3v3_main: regulator-3 {
+ /* output of LM5141-Q1 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_main";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vmain_pd>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vdd_mmc1: regulator-4 {
+ /* TPS22918DBVR */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_mmc1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+ bootph-all;
+ };
+
+ vcc_3v3_sys: regulator-5 {
+ /* output of TPS222965DSGT */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_main>;
+ regulator-always-on;
+ regulator-boot-on;
+ bootph-all;
+ };
+
+ vddshv_sdio: regulator-6 {
+ compatible = "regulator-gpio";
+ regulator-name = "vddshv_sdio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vddshv_sdio_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ gpios = <&main_gpio1 31 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ bootph-all;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usr_led_pins_default>;
+
+ led-0 {
+ label = "am62d-evm:green:heartbeat";
+ gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_HEARTBEAT;
+ default-state = "off";
+ };
+ };
+};
+
+&mcu_pmx0 {
+ status = "okay";
+
+ pmic_irq_pins_default: pmic-irq-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */
+ >;
+ };
+
+ wkup_uart0_pins_default: wkup-uart0-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
+ AM62DX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
+ AM62DX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
+ AM62DX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
+ >;
+ bootph-all;
+ };
+};
+
+/* WKUP UART0 is used for DM firmware logs */
+&wkup_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_uart0_pins_default>;
+ bootph-all;
+ status = "reserved";
+};
+
+&main_pmx0 {
+ main_uart0_pins_default: main-uart0-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x01c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
+ AM62DX_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
+ >;
+ bootph-all;
+ };
+
+ main_i2c0_pins_default: main-i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */
+ AM62DX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */
+ >;
+ bootph-all;
+ };
+
+ main_i2c1_pins_default: main-i2c1-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C17) I2C1_SCL */
+ AM62DX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (E17) I2C1_SDA */
+ >;
+ bootph-all;
+ };
+
+ main_i2c2_pins_default: main-i2c2-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (M22) GPMC0_CSn2.I2C2_SCL */
+ AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */
+ >;
+ };
+
+ main_mmc0_pins_default: main-mmc0-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
+ AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */
+ AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
+ AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
+ AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
+ AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */
+ AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */
+ AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */
+ AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
+ AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
+ >;
+ bootph-all;
+ };
+
+ main_mmc1_pins_default: main-mmc1-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */
+ AM62DX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (E22) MMC1_CLK */
+ AM62DX_IOPAD(0x0230, PIN_INPUT, 0) /* (B22) MMC1_DAT0 */
+ AM62DX_IOPAD(0x022c, PIN_INPUT, 0) /* (D21) MMC1_DAT1 */
+ AM62DX_IOPAD(0x0228, PIN_INPUT, 0) /* (C22) MMC1_DAT2 */
+ AM62DX_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+ AM62DX_IOPAD(0x0240, PIN_INPUT, 0) /* (E18) MMC1_SDCD */
+ >;
+ bootph-all;
+ };
+
+ main_mdio0_pins_default: main-mdio0-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
+ AM62DX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
+ >;
+ bootph-all;
+ };
+
+ main_rgmii1_pins_default: main-rgmii1-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
+ AM62DX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
+ AM62DX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
+ AM62DX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
+ AM62DX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
+ AM62DX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
+ AM62DX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
+ AM62DX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
+ AM62DX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
+ AM62DX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
+ AM62DX_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */
+ AM62DX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */
+ >;
+ bootph-all;
+ };
+
+ main_rgmii2_pins_default: main-rgmii2-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */
+ AM62DX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */
+ AM62DX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */
+ AM62DX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */
+ AM62DX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */
+ AM62DX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */
+ AM62DX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */
+ AM62DX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */
+ AM62DX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */
+ AM62DX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */
+ AM62DX_IOPAD(0x0168, PIN_OUTPUT, 0) /* (AB19) RGMII2_TXC */
+ AM62DX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (Y19) RGMII2_TX_CTL */
+ >;
+ bootph-all;
+ };
+
+ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+ >;
+ };
+
+ vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x1f4, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO1_31 */
+ >;
+ bootph-all;
+ };
+
+ usr_led_pins_default: usr-led-default-pins {
+ pinctrl-single,pins = <
+ AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
+ >;
+ };
+};
+
+&mcu_gpio0 {
+ status = "okay";
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c0_pins_default>;
+ clock-frequency = <400000>;
+ bootph-all;
+ status = "okay";
+
+ typec_pd0: usb-power-controller@3f {
+ compatible = "ti,tps6598x";
+ reg = <0x3f>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ self-powered;
+ data-role = "dual";
+ power-role = "sink";
+ port {
+ usb_con_hs: endpoint {
+ remote-endpoint = <&usb0_hs_ep>;
+ };
+ };
+ };
+ };
+
+ exp1: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+ bootph-all;
+
+ gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+ "","MMC1_SD_EN",
+ "VPP_EN", "GPIO_DIX_RST",
+ "IO_EXP_OPT_EN", "DIX_INT",
+ "GPIO_eMMC_RSTn", "CPLD2_DONE",
+ "CPLD2_INTN", "CPLD1_DONE",
+ "CPLD1_INTN", "USB_TYPEA_OC_INDICATION",
+ "PCM1_INT", "PCM2_INT",
+ "GPIO_PCM1_RST", "TEST_GPIO2",
+ "GPIO_PCM2_RST", "",
+ "IO_MCAN0_STB", "IO_MCAN1_STB",
+ "PD_I2C_IRQ", "IO_EXP_TEST_LED";
+ };
+
+ exp2: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "PCM6240_BUF_IO_EN", "",
+ "CPLD1_JTAGENB", "CPLD1_PROGRAMN",
+ "CPLD2_JTAGENB", "CPLD2_PROGRAMN",
+ "", "",
+ "", "CPLD1_TCK",
+ "CPLD1_TMS", "CPLD1_TDI",
+ "CPLD1_TDO", "CPLD2_TCK",
+ "CPLD2_TMS", "CPLD2_TDI",
+ "CPLD2_TDO", "ADDR1_IO_EXP",
+ "SoC_I2C0_SCL", "SoC_I2C0_SDA";
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_pins_default>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&main_i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c2_pins_default>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&sdhci0 {
+ /* eMMC */
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ bootph-all;
+ status = "okay";
+};
+
+&sdhci1 {
+ /* SD/MMC */
+ vmmc-supply = <&vdd_mmc1>;
+ vqmmc-supply = <&vddshv_sdio>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc1_pins_default>;
+ disable-wp;
+ bootph-all;
+ status = "okay";
+};
+
+&main_gpio0 {
+ bootph-all;
+ status = "okay";
+};
+
+&main_gpio1 {
+ bootph-all;
+ status = "okay";
+};
+
+&main_gpio_intr {
+ status = "okay";
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart0_pins_default>;
+ bootph-all;
+ status = "okay";
+};
+
+&usb0 {
+ usb-role-switch;
+
+ port {
+ usb0_hs_ep: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_rgmii1_pins_default>,
+ <&main_rgmii2_pins_default>;
+ status = "okay";
+
+ cpts@3d000 {
+ /* MAP HW3_TS_PUSH to GENF1 */
+ ti,pps = <2 1>;
+ };
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-id";
+ phy-handle = <&cpsw3g_phy0>;
+ status = "okay";
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-id";
+ phy-handle = <&cpsw3g_phy1>;
+ status = "okay";
+};
+
+&cpsw3g_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mdio0_pins_default>;
+ status = "okay";
+
+ cpsw3g_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,min-output-impedance;
+ };
+
+ cpsw3g_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,min-output-impedance;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ bootph-pre-ram;
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ firmware-name = "am62d-mcu-r5f0_0-fw";
+ status = "okay";
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ firmware-name = "am62d-c71_0-fw";
+ status = "okay";
+};
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+ status = "reserved";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for AM62D2 SoC family in Quad core configuration
+ *
+ * TRM: https://www.ti.com/lit/pdf/sprujd4
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62a7.dtsi"
+
+/ {
+ model = "Texas Instruments K3 AM62D SoC";
+ compatible = "ti,am62d2";
+};
+
+/delete-node/ &vpu; /* Video Codec is disabled in AM62D2 SoC */
+/delete-node/ &e5010; /* JPEG Encoder is disabled in AM62D2 SoC */
main_pmx0: pinctrl@f4000 {
compatible = "pinctrl-single";
- reg = <0x00 0xf4000 0x00 0x2ac>;
+ reg = <0x00 0xf4000 0x00 0x2b0>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
thermal-sensors = <&wkup_vtm0 0>;
trips {
+ main0_alert: main0-alert {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
main0_crit: main0-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&main0_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
main1_thermal: main1-thermal {
thermal-sensors = <&wkup_vtm0 1>;
trips {
+ main1_alert: main1-alert {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
main1_crit: main1-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&main1_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
main2_thermal: main2-thermal {
thermal-sensors = <&wkup_vtm0 2>;
trips {
+ main2_alert: main2-alert {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
main2_crit: main2-crit {
temperature = <125000>; /* milliCelsius */
hysteresis = <2000>; /* milliCelsius */
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&main2_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
};
/* Verdin PWM_3_DSI as GPIO */
pinctrl_pwm3_dsi_gpio: main-gpio1-16-default-pins {
pinctrl-single,pins = <
- AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */
+ AM62PX_IOPAD(0x01b8, PIN_INPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */
>;
};
/* Verdin SD_1_CD# */
pinctrl_sd1_cd: main-gpio1-48-default-pins {
pinctrl-single,pins = <
- AM62PX_IOPAD(0x0240, PIN_INPUT, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */
+ AM62PX_IOPAD(0x0240, PIN_INPUT_PULLUP, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */
>;
};
/* Verdin I2C_3_HDMI */
pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
pinctrl-single,pins = <
- AM62PX_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */
- AM62PX_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */
+ AM62PX_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */
+ AM62PX_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */
>;
};
};
};
+&main0_alert {
+ temperature = <95000>;
+};
+
+&main0_crit {
+ temperature = <105000>;
+};
+
+&main1_alert {
+ temperature = <95000>;
+};
+
+&main1_crit {
+ temperature = <105000>;
+};
+
+&main2_alert {
+ temperature = <95000>;
+};
+
+&main2_crit {
+ temperature = <105000>;
+};
+
&main_gpio0 {
gpio-line-names =
"SODIMM_52",
};
};
+&cpsw_mac_syscon {
+ bootph-all;
+};
+
+&phy_gmii_sel {
+ bootph-all;
+};
+
&main_gpio0 {
bootph-all;
};
AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
>;
+ bootph-all;
};
main_mmc1_pins_default: main-mmc1-default-pins {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
status = "okay";
+ bootph-all;
};
&cpsw_port2 {
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
+ bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
next-level-cache = <&l2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 135 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
next-level-cache = <&l2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 136 0>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
next-level-cache = <&l2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 137 0>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
next-level-cache = <&l2_0>;
operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 138 0>;
+ #cooling-cells = <2>;
};
};
>;
};
- main_mmc0_pins_default: main-mmc0-default-pins {
- bootph-all;
- pinctrl-single,pins = <
- AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
- AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
- AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
- AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
- AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
- AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
- AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
- AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
- AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
- AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
- >;
- };
-
main_mmc1_pins_default: main-mmc1-default-pins {
bootph-all;
pinctrl-single,pins = <
clock-frequency = <400000>;
};
-&sdhci0 {
- bootph-all;
- status = "okay";
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&main_mmc0_pins_default>;
-};
-
&sdhci1 {
/* SD/MMC */
bootph-all;
max-functions = /bits/ 8 <1>;
phys = <&serdes0_pcie_link>;
phy-names = "pcie-phy";
+ bootph-all;
ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
};
};
&icssg0_mdio {
pinctrl-names = "default";
pinctrl-0 = <&icssg0_mdio_pins_default &clkout0_pins_default>;
+ assigned-clocks = <&k3_clks 157 123>;
+ assigned-clock-parents = <&k3_clks 157 125>;
status = "okay";
icssg0_phy1: ethernet-phy@1 {
<0x00 0x32800000 0x00 0x100000>;
interrupt-names = "rx_011";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ bootph-all;
};
hwspinlock: spinlock@30e00000 {
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
+ bootph-all;
};
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
+ bootph-all;
};
k3_reset: reset-controller {
compatible = "ti,sci-reset";
#reset-cells = <2>;
+ bootph-all;
};
};
chipid: chipid@14 {
compatible = "ti,am654-chipid";
reg = <0x14 0x4>;
+ bootph-all;
};
};
reg = <0x42050000 0x25c>;
power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
#thermal-sensor-cells = <1>;
+ bootph-all;
};
};
regulator-boot-on;
vin-supply = <&vcc3v3_io>;
gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
+ bootph-all;
};
};
AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
>;
+ bootph-all;
};
ddr_vtt_pins_default: ddr-vtt-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */
>;
+ bootph-all;
};
wkup_i2c0_pins_default: wkup-i2c0-default-pins {
AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
>;
+ bootph-all;
};
push_button_pins_default: push-button-default-pins {
AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */
AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
>;
+ bootph-all;
};
wkup_pca554_default: wkup-pca554-default-pins {
AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
>;
+ bootph-all;
};
mcu_cpsw_pins_default: mcu-cpsw-default-pins {
AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
>;
+ bootph-all;
};
main_i2c2_pins_default: main-i2c2-default-pins {
AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
>;
+ bootph-all;
};
main_mmc1_pins_default: main-mmc1-default-pins {
AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
>;
+ bootph-all;
};
usb1_pins_default: usb1-default-pins {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+ bootph-all;
};
&wkup_i2c0 {
ti,vsel0-state-high;
ti,vsel1-state-high;
ti,enable-vout-discharge;
+ bootph-all;
};
gpio@38 {
bus-width = <8>;
non-removable;
ti,driver-strength-ohm = <50>;
+ bootph-all;
};
/*
pinctrl-0 = <&main_mmc1_pins_default>;
ti,driver-strength-ohm = <50>;
disable-wp;
+ bootph-all;
};
&usb1 {
&dss {
status = "disabled";
};
+
+&wkup_gpio0 {
+ bootph-all;
+};
&dwc3_0 {
status = "okay";
+ bootph-all;
};
&usb0_phy {
<&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
phys = <&serdes0 PHY_TYPE_USB3 0>;
phy-names = "usb3-phy";
+ bootph-all;
};
&usb0 {
J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
>;
+ bootph-all;
};
mcu_mdio_pins_default: mcu-mdio-default-pins {
J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
>;
+ bootph-all;
};
mcu_mcan0_pins_default: mcu-mcan0-default-pins {
};
};
+&cpsw_mac_syscon {
+ bootph-all;
+};
+
+&phy_gmii_sel {
+ bootph-all;
+};
+
&main_gpio0 {
status = "okay";
pinctrl-names = "default";
&davinci_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
+ bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
+ bootph-all;
};
&mcu_mcan0 {
J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
>;
+ bootph-all;
};
mcu_mdio_pins_default: mcu-mdio-default-pins {
J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
>;
+ bootph-all;
};
mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins {
};
};
+&cpsw_mac_syscon {
+ bootph-all;
+};
+
+&phy_gmii_sel {
+ bootph-all;
+};
+
&mailbox0_cluster0 {
status = "okay";
interrupts = <436>;
&davinci_mdio {
mcu_phy0: ethernet-phy@0 {
reg = <0>;
+ bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
status = "okay";
phy-mode = "rgmii-rxid";
phy-handle = <&mcu_phy0>;
+ bootph-all;
};
&mcu_r5fss0_core0 {
&serdes_ln_ctrl {
idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
<J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>,
- <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
- <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>;
+ <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+ <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+ <J784S4_SERDES2_LANE0_IP2_UNUSED>, <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+ <J784S4_SERDES2_LANE2_QSGMII_LANE1>, <J784S4_SERDES2_LANE3_QSGMII_LANE2>,
+ <J784S4_SERDES4_LANE0_EDP_LANE0>, <J784S4_SERDES4_LANE1_EDP_LANE1>,
+ <J784S4_SERDES4_LANE2_EDP_LANE2>, <J784S4_SERDES4_LANE3_EDP_LANE3>;
};
&serdes_wiz0 {
power-domain-names = "a", "b";
dma-coherent;
};
+
+ mcasp0: mcasp@2b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b00000 0x00 0x2000>,
+ <0x00 0x02b08000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 209 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 209 0>;
+ assigned-clock-parents = <&k3_clks 209 1>;
+ power-domains = <&k3_pds 209 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@2b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b10000 0x00 0x2000>,
+ <0x00 0x02b18000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 210 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 210 0>;
+ assigned-clock-parents = <&k3_clks 210 1>;
+ power-domains = <&k3_pds 210 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@2b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b20000 0x00 0x2000>,
+ <0x00 0x02b28000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 211 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 211 0>;
+ assigned-clock-parents = <&k3_clks 211 1>;
+ power-domains = <&k3_pds 211 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp3: mcasp@2b30000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b30000 0x00 0x2000>,
+ <0x00 0x02b38000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 212 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 212 0>;
+ assigned-clock-parents = <&k3_clks 212 1>;
+ power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ mcasp4: mcasp@2b40000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x00 0x02b40000 0x00 0x2000>,
+ <0x00 0x02b48000 0x00 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>;
+ dma-names = "tx", "rx";
+ clocks = <&k3_clks 213 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 213 0>;
+ assigned-clock-parents = <&k3_clks 213 1>;
+ power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
};
};
};
+&cpsw_mac_syscon {
+ bootph-all;
+};
+
+&phy_gmii_sel {
+ bootph-all;
+};
+
&main_pmx0 {
main_mcan0_pins_default: main-mcan0-default-pins {
J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
>;
+ bootph-all;
};
ospi0_pins_default: ospi0-default-pins {
J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
>;
+ bootph-all;
};
main_usb1_pins_default: main-usb1-default-pins {
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
+ bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
status = "okay";
+ bootph-all;
};
&main_gpio1 {
/* P05 - USB2.0_MUX_SEL */
gpio-hog;
gpios = <5 GPIO_ACTIVE_LOW>;
- output-high;
+ output-low;
};
p01_hog: p01-hog {
<0x10 0x3>; /* SERDES1 lane0 select */
};
+ audio_refclk0: clock@82e0 {
+ compatible = "ti,am62-audio-refclk";
+ reg = <0x82e0 0x4>;
+ clocks = <&k3_clks 157 0>;
+ assigned-clocks = <&k3_clks 157 0>;
+ assigned-clock-parents = <&k3_clks 157 15>;
+ #clock-cells = <0>;
+ };
+
audio_refclk1: clock@82e4 {
compatible = "ti,am62-audio-refclk";
reg = <0x82e4 0x4>;
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
clocks = <&k3_clks 135 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
clocks = <&k3_clks 136 0>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
clocks = <&k3_clks 137 0>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
clocks = <&k3_clks 138 0>;
+ #cooling-cells = <2>;
};
};
compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon";
reg = <0x1a090 0x4>;
};
+
+ acspcie1_proxy_ctrl: clock-controller@1a094 {
+ compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon";
+ reg = <0x1a094 0x4>;
+ };
};
main_ehrpwm0: pwm@3000000 {
power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
status = "disabled";
};
+
+ bist_main14: bist@33c0000 {
+ compatible = "ti,j784s4-bist";
+ reg = <0x00 0x033c0000 0x00 0x400>,
+ <0x00 0x0010c1a0 0x00 0x01c>;
+ reg-names = "cfg", "ctrl_mmr";
+ clocks = <&k3_clks 237 7>;
+ power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>;
+ bootph-pre-ram;
+ ti,sci-dev-id = <234>;
+ };
};
#ifndef DTS_ARM64_TI_K3_PINCTRL_H
#define DTS_ARM64_TI_K3_PINCTRL_H
+#define ST_EN_SHIFT (14)
#define PULLUDEN_SHIFT (16)
#define PULLTYPESEL_SHIFT (17)
#define RXACTIVE_SHIFT (18)
#define DS_PULLUD_EN_SHIFT (27)
#define DS_PULLTYPE_SEL_SHIFT (28)
+/* Schmitt trigger configuration */
+#define ST_DISABLE (0 << ST_EN_SHIFT)
+#define ST_ENABLE (1 << ST_EN_SHIFT)
+
#define PULL_DISABLE (1 << PULLUDEN_SHIFT)
#define PULL_ENABLE (0 << PULLUDEN_SHIFT)
#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP)
#define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN)
-#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
-#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
+#define PIN_INPUT (INPUT_EN | ST_ENABLE | PULL_DISABLE)
+#define PIN_INPUT_PULLUP (INPUT_EN | ST_ENABLE | PULL_UP)
+#define PIN_INPUT_PULLDOWN (INPUT_EN | ST_ENABLE | PULL_DOWN)
+/* Input configurations with Schmitt Trigger disabled */
+#define PIN_INPUT_NOST (INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP_NOST (INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN_NOST (INPUT_EN | PULL_DOWN)
#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT)
#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT)
#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62DX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62DX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+
#define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
};
};
+&apbdma3 {
+ status = "okay";
+};
+
+&mmc0 {
+ status = "okay";
+ bus-width = <4>;
+};
+
&gmac0 {
status = "okay";
status = "disabled";
};
- dma-controller@1fe10c20 {
+ apbdma2: dma-controller@1fe10c20 {
compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
reg = <0 0x1fe10c20 0 0x8>;
interrupt-parent = <&eiointc>;
status = "disabled";
};
- dma-controller@1fe10c30 {
+ apbdma3: dma-controller@1fe10c30 {
compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
reg = <0 0x1fe10c30 0 0x8>;
interrupt-parent = <&eiointc>;
status = "disabled";
};
+ mmc0: mmc@1ff64000 {
+ compatible = "loongson,ls2k0500-mmc";
+ reg = <0 0x1ff64000 0 0x2000>,
+ <0 0x1fe10100 0 0x4>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <57>;
+ dmas = <&apbdma3 0>;
+ dma-names = "rx-tx";
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ status = "disabled";
+ };
+
+ mmc@1ff66000 {
+ compatible = "loongson,ls2k0500-mmc";
+ reg = <0 0x1ff66000 0 0x2000>,
+ <0 0x1fe10100 0 0x4>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <58>;
+ dmas = <&apbdma2 0>;
+ dma-names = "rx-tx";
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ status = "disabled";
+ };
+
pmc: power-management@1ff6c000 {
compatible = "loongson,ls2k0500-pmc", "syscon";
reg = <0x0 0x1ff6c000 0x0 0x58>;
};
};
+&apbdma1 {
+ status = "okay";
+};
+
+&mmc {
+ status = "okay";
+
+ pinctrl-0 = <&sdio_pins_default>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ cd-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+};
+
&gmac0 {
status = "okay";
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
- <>,
- <26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 IRQ_TYPE_NONE>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_NONE>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<26 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
- <>,
+ <0 IRQ_TYPE_NONE>,
<27 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
- <>,
- <>,
+ <0 IRQ_TYPE_NONE>,
+ <0 IRQ_TYPE_NONE>,
<27 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
<27 IRQ_TYPE_LEVEL_HIGH>,
status = "disabled";
};
- dma-controller@1fe00c10 {
+ apbdma1: dma-controller@1fe00c10 {
compatible = "loongson,ls2k1000-apbdma";
reg = <0x0 0x1fe00c10 0x0 0x8>;
interrupt-parent = <&liointc1>;
status = "disabled";
};
+ mmc: mmc@1fe2c000 {
+ compatible = "loongson,ls2k1000-mmc";
+ reg = <0 0x1fe2c000 0 0x68>,
+ <0 0x1fe00438 0 0x8>;
+ interrupt-parent = <&liointc0>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_APB_CLK>;
+ dmas = <&apbdma1 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
spi0: spi@1fff0220 {
compatible = "loongson,ls2k1000-spi";
reg = <0x0 0x1fff0220 0x0 0x10>;
};
};
+&emmc {
+ status = "okay";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+};
+
&sata {
status = "okay";
};
status = "disabled";
};
+ emmc: mmc@79990000 {
+ compatible = "loongson,ls2k2000-mmc";
+ reg = <0x0 0x79990000 0x0 0x1000>;
+ interrupt-parent = <&pic>;
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_EMMC_CLK>;
+ status = "disabled";
+ };
+
+ mmc@79991000 {
+ compatible = "loongson,ls2k2000-mmc";
+ reg = <0x0 0x79991000 0x0 0x1000>;
+ interrupt-parent = <&pic>;
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LOONGSON2_EMMC_CLK>;
+ status = "disabled";
+ };
+
pcie@1a000000 {
compatible = "loongson,ls2k-pci";
reg = <0x0 0x1a000000 0x0 0x02000000>,
};
};
- etop@e180000 {
+ ethernet@e180000 {
compatible = "lantiq,etop-xway";
reg = <0xe180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
+ interrupt-names = "tx", "rx";
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,rx-burst-length = <4>;
+ lantiq,tx-burst-length = <4>;
};
stp0: stp@e100bb0 {
<0x8 0x02000000 0x0 0x7E000000>;
};
};
+
+&i2c2 {
+ temperature-sensor@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "U60";
+ };
+};
ranges;
compatible = "simple-bus";
+ i2c0: i2c@300000 {
+ compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+ reg = <0 0x300000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>; /* Fast mode */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+ clock-names = "i2cclk", "apb_pclk";
+ resets = <&olb 0 13>;
+ i2c-transfer-timeout-us = <10000>;
+ mobileye,olb = <&olb 0>;
+ };
+
+ i2c1: i2c@400000 {
+ compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+ reg = <0 0x400000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>; /* Fast mode */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+ clock-names = "i2cclk", "apb_pclk";
+ resets = <&olb 0 14>;
+ i2c-transfer-timeout-us = <10000>;
+ mobileye,olb = <&olb 1>;
+ };
+
+ i2c2: i2c@500000 {
+ compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+ reg = <0 0x500000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>; /* Fast mode */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+ clock-names = "i2cclk", "apb_pclk";
+ resets = <&olb 0 15>;
+ i2c-transfer-timeout-us = <10000>;
+ mobileye,olb = <&olb 2>;
+ };
+
+ i2c3: i2c@600000 {
+ compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+ reg = <0 0x600000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>; /* Fast mode */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+ clock-names = "i2cclk", "apb_pclk";
+ resets = <&olb 0 16>;
+ i2c-transfer-timeout-us = <10000>;
+ mobileye,olb = <&olb 3>;
+ };
+
+ i2c4: i2c@700000 {
+ compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+ reg = <0 0x700000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>; /* Fast mode */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&olb 35>, <&olb EQ5C_PER_I2C>;
+ clock-names = "i2cclk", "apb_pclk";
+ resets = <&olb 0 17>;
+ i2c-transfer-timeout-us = <10000>;
+ mobileye,olb = <&olb 4>;
+ };
+
uart0: serial@800000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0 0x800000 0x0 0x1000>;
clocks = <&olb EQ5C_CPU_CORE0>;
};
};
+
+ emmc: mmc@2200000 {
+ compatible = "mobileye,eyeq-sd4hc", "cdns,sd4hc";
+ reg = <0 0x2200000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&olb EQ5C_PER_EMMC>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-ddr-1_8v;
+ sd-uhs-ddr50;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+
+ cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-mmc-highspeed = <2>;
+ cdns,phy-input-delay-mmc-ddr = <3>;
+ cdns,phy-dll-delay-sdclk = <32>;
+ cdns,phy-dll-delay-sdclk-hsmmc = <32>;
+ cdns,phy-dll-delay-strobe = <32>;
+ };
+
+ gpio0: gpio@1400000 {
+ compatible = "mobileye,eyeq5-gpio";
+ reg = <0x0 0x1400000 0x0 0x1000>;
+ gpio-bank = <0>;
+ ngpios = <29>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&olb 0 0 29>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ resets = <&olb 0 26>;
+ };
+
+ gpio1: gpio@1500000 {
+ compatible = "mobileye,eyeq5-gpio";
+ reg = <0x0 0x1500000 0x0 0x1000>;
+ gpio-bank = <1>;
+ ngpios = <23>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 14 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&olb 0 29 23>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ resets = <&olb 0 26>;
+ };
};
};
clock-names = "ref";
};
+ emmc: mmc@d8010000 {
+ compatible = "mobileye,eyeq-sd4hc", "cdns,sd4hc";
+ reg = <0 0xd8010000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&olb_south EQ6HC_SOUTH_DIV_EMMC>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-ddr-1_8v;
+ sd-uhs-ddr50;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+
+ cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-mmc-highspeed = <2>;
+ cdns,phy-input-delay-mmc-ddr = <3>;
+ cdns,phy-dll-delay-sdclk = <32>;
+ cdns,phy-dll-delay-sdclk-hsmmc = <32>;
+ cdns,phy-dll-delay-strobe = <32>;
+ };
+
olb_south: system-controller@d8013000 {
compatible = "mobileye,eyeq6h-south-olb", "syscon";
reg = <0x0 0xd8013000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
};
+
+ wifi: wifi@180c0000 {
+ compatible = "qca,ar9130-wifi";
+ reg = <0x180c0000 0x230000>;
+
+ interrupts = <2>;
+
+ status = "disabled";
+ };
};
usb_phy: usb-phy {
};
};
};
+
+&wifi {
+ status = "okay";
+};
status = "disabled";
};
+
+ wifi: wifi@18100000 {
+ compatible = "qca,ar9330-wifi";
+ reg = <0x18100000 0x20000>;
+
+ interrupts = <2>;
+
+ status = "disabled";
+ };
};
usb_phy: usb-phy {
&phy_port4 {
status = "okay";
};
+
+&wifi {
+ status = "okay";
+};
reg = <0>;
};
};
+
+&wifi {
+ status = "okay";
+};
reg = <0>;
};
};
+
+&wifi {
+ status = "okay";
+};
&phy_port4 {
status = "okay";
};
+
+&wifi {
+ status = "okay";
+};
reg = <0>;
};
};
+
+&wifi {
+ status = "okay";
+};
led-power-green {
label = "smartgw:power:green";
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- default-state = "off";
+ linux,default-trigger = "timer";
};
led-power-red {
reg-shift = <2>;
};
};
+
+ wmac: wifi@10180000 {
+ compatible = "ralink,rt2880-wifi";
+ reg = <0x10180000 0x40000>;
+
+ clocks = <&sysc 16>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+ };
};
#size-cells = <1>;
sysc: syscon@0 {
- compatible = "ralink,mt7628-sysc", "syscon";
+ compatible = "ralink,mt7628-sysc", "ralink,mt7688-sysc", "syscon";
reg = <0x0 0x60>;
#clock-cells = <1>;
#reset-cells = <1>;
watchdog: watchdog@100 {
compatible = "mediatek,mt7621-wdt";
- reg = <0x100 0x30>;
-
- resets = <&sysc 8>;
- reset-names = "wdt";
-
- interrupt-parent = <&intc>;
- interrupts = <24>;
+ reg = <0x100 0x100>;
+ mediatek,sysctl = <&sysc>;
status = "disabled";
};
};
};
};
+
+&mdio0 {
+ /* External RTL8224 */
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+};
+
+&mdio1 {
+ /* External RTL8224 */
+ phy4: ethernet-phy@0 {
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy5: ethernet-phy@1 {
+ reg = <1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy6: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy7: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+};
+
+&switch0 {
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-handle = <&phy0>;
+ phy-mode = "usxgmii";
+ };
+ port@1 {
+ reg = <1>;
+ phy-handle = <&phy1>;
+ phy-mode = "usxgmii";
+ };
+ port@2 {
+ reg = <2>;
+ phy-handle = <&phy2>;
+ phy-mode = "usxgmii";
+ };
+ port@3 {
+ reg = <3>;
+ phy-handle = <&phy3>;
+ phy-mode = "usxgmii";
+ };
+ port@16 {
+ reg = <16>;
+ phy-handle = <&phy4>;
+ phy-mode = "usxgmii";
+ };
+ port@17 {
+ reg = <17>;
+ phy-handle = <&phy5>;
+ phy-mode = "usxgmii";
+ };
+ port@18 {
+ reg = <18>;
+ phy-handle = <&phy6>;
+ phy-mode = "usxgmii";
+ };
+ port@19 {
+ reg = <19>;
+ phy-handle = <&phy7>;
+ phy-mode = "usxgmii";
+ };
+ port@24{
+ reg = <24>;
+ phy-mode = "10gbase-r";
+ };
+ port@25{
+ reg = <25>;
+ phy-mode = "10gbase-r";
+ };
+ };
+};
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <23>, <24>;
+ interrupt-names = "switch", "nic";
+
reboot@c {
compatible = "syscon-reboot";
reg = <0x0c 0x4>;
clocks = <&lx_clk>;
};
+ watchdog0: watchdog@3260 {
+ compatible = "realtek,rtl9300-wdt";
+ reg = <0x3260 0xc>;
+
+ realtek,reset-mode = "soc";
+
+ clocks = <&lx_clk>;
+ timeout-sec = <30>;
+
+ interrupt-parent = <&intc>;
+ interrupt-names = "phase1", "phase2";
+ interrupts = <5>, <6>;
+ };
+
+ gpio0: gpio@3300 {
+ compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+ reg = <0x3300 0x1c>, <0x3338 0x8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <24>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+
snand: spi@1a400 {
compatible = "realtek,rtl9301-snand";
reg = <0x1a400 0x44>;
ibm,powerpc-cpu-features {
display-name = "Microwatt";
- isa = <3010>;
+ isa = <3100>;
device_type = "cpu-features";
compatible = "ibm,powerpc-cpu-features";
#cooling-cells = <2>;
};
- i2c-gpio-0 {
+ i2c-0 {
compatible = "i2c-gpio";
sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */
scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Andes Technology Corporation. All rights reserved.
+ */
+
+#include "qilai.dtsi"
+
+/ {
+ model = "Voyager";
+ compatible = "andestech,voyager", "andestech,qilai";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@400000000 {
+ device_type = "memory";
+ reg = <0x4 0x00000000 0x4 0x00000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Andes Technology Corporation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <62500000>;
+
+ cpu0: cpu@0 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu0_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc", "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu1: cpu@1 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ reg = <1>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu1_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc",
+ "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu2: cpu@2 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ reg = <2>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu2_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc",
+ "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpu3: cpu@3 {
+ compatible = "andestech,ax45mp", "riscv";
+ device_type = "cpu";
+ reg = <3>;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
+ "zicntr", "zicsr", "zifencei",
+ "zihpm", "xandespmu";
+ mmu-type = "riscv,sv39";
+ clock-frequency = <100000000>;
+ i-cache-size = <0x8000>;
+ i-cache-sets = <256>;
+ i-cache-line-size = <64>;
+ d-cache-size = <0x8000>;
+ d-cache-sets = <128>;
+ d-cache-line-size = <64>;
+ next-level-cache = <&l2_cache>;
+
+ cpu3_intc: interrupt-controller {
+ compatible = "andestech,cpu-intc",
+ "riscv,cpu-intc";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ plmt: timer@100000 {
+ compatible = "andestech,qilai-plmt", "andestech,plmt0";
+ reg = <0x0 0x00100000 0x0 0x100000>;
+ interrupts-extended = <&cpu0_intc 7>,
+ <&cpu1_intc 7>,
+ <&cpu2_intc 7>,
+ <&cpu3_intc 7>;
+ };
+
+ l2_cache: cache-controller@200000 {
+ compatible = "andestech,qilai-ax45mp-cache",
+ "andestech,ax45mp-cache", "cache";
+ reg = <0x0 0x00200000 0x0 0x100000>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ cache-line-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <0x200000>;
+ cache-unified;
+ };
+
+ plic_sw: interrupt-controller@400000 {
+ compatible = "andestech,qilai-plicsw",
+ "andestech,plicsw";
+ reg = <0x0 0x00400000 0x0 0x400000>;
+ interrupts-extended = <&cpu0_intc 3>,
+ <&cpu1_intc 3>,
+ <&cpu2_intc 3>,
+ <&cpu3_intc 3>;
+ };
+
+ plic: interrupt-controller@2000000 {
+ compatible = "andestech,qilai-plic",
+ "andestech,nceplic100";
+ reg = <0x0 0x02000000 0x0 0x2000000>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>;
+ riscv,ndev = <71>;
+ };
+
+ uart0: serial@30300000 {
+ compatible = "andestech,uart16550", "ns16550a";
+ reg = <0x0 0x30300000 0x0 0x100000>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <50000000>;
+ reg-offset = <32>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ no-loopback-test;
+ };
+ };
+};
compatible = "pwm-leds";
led-d1 {
- pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 0 7812500 0>;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d1";
};
led-d2 {
- pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 1 7812500 0>;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d2";
};
led-d3 {
- pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 2 7812500 0>;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d3";
};
led-d4 {
- pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 3 7812500 0>;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d4";
compatible = "pwm-leds";
led-d12 {
- pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 0 7812500 0>;
color = <LED_COLOR_ID_GREEN>;
max-brightness = <255>;
label = "d12";
label = "d2";
led-red {
- pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 2 7812500 0>;
color = <LED_COLOR_ID_RED>;
};
led-green {
- pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 1 7812500 0>;
color = <LED_COLOR_ID_GREEN>;
};
led-blue {
- pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
- active-low;
+ pwms = <&pwm0 3 7812500 0>;
color = <LED_COLOR_ID_BLUE>;
};
};
#include <dt-bindings/clock/sophgo,cv1800.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include "cv18xx-reset.h"
/ {
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ rst: reset-controller@3003000 {
+ compatible = "sophgo,cv1800b-reset";
+ reg = <0x3003000 0x1000>;
+ #reset-cells = <1>;
+ };
+
+ mdio: mdio-mux@3009800 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ reg = <0x3009800 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mdio-parent-bus = <&gmac0_mdio>;
+ mux-mask = <0x80>;
+ status = "disabled";
+
+ internal_mdio: mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ internal_ephy: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+
+ external_mdio: mdio@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80>;
+ };
+ };
+
gpio0: gpio@3020000 {
compatible = "snps,dw-apb-gpio";
reg = <0x3020000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ resets = <&rst RST_GPIO0>;
porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
reg = <0x3021000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ resets = <&rst RST_GPIO1>;
portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
reg = <0x3022000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ resets = <&rst RST_GPIO2>;
portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
reg = <0x3023000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ resets = <&rst RST_GPIO3>;
portd: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>;
clock-names = "ref", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C0>;
status = "disabled";
};
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>;
clock-names = "ref", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C1>;
status = "disabled";
};
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>;
clock-names = "ref", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C2>;
status = "disabled";
};
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>;
clock-names = "ref", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C3>;
status = "disabled";
};
clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>;
clock-names = "ref", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C4>;
status = "disabled";
};
+ gmac0: ethernet@4070000 {
+ compatible = "sophgo,cv1800b-dwmac", "snps,dwmac-3.70a";
+ reg = <0x04070000 0x10000>;
+ clocks = <&clk CLK_AXI4_ETH0>, <&clk CLK_ETH0_500M>;
+ clock-names = "stmmaceth", "ptp_ref";
+ interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "internal";
+ resets = <&rst RST_ETH0>;
+ reset-names = "stmmaceth";
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ snps,multicast-filter-bins = <0>;
+ snps,perfect-filter-entries = <1>;
+ snps,aal;
+ snps,txpbl = <8>;
+ snps,rxpbl = <8>;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+ status = "disabled";
+
+ gmac0_mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <16 8 4 0 0 0 0>;
+ snps,rd_osr_lmt = <2>;
+ snps,wr_osr_lmt = <1>;
+ };
+ };
+
uart0: serial@4140000 {
compatible = "snps,dw-apb-uart";
reg = <0x04140000 0x100>;
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst RST_UART0>;
status = "disabled";
};
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst RST_UART1>;
status = "disabled";
};
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst RST_UART2>;
status = "disabled";
};
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst RST_UART3>;
status = "disabled";
};
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>;
clock-names = "ssi_clk", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_SPI0>;
status = "disabled";
};
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>;
clock-names = "ssi_clk", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_SPI1>;
status = "disabled";
};
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>;
clock-names = "ssi_clk", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_SPI2>;
status = "disabled";
};
clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>;
clock-names = "ssi_clk", "pclk";
interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_SPI3>;
status = "disabled";
};
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst RST_UART4>;
status = "disabled";
};
snps,data-width = <2>;
status = "disabled";
};
+
+ rtc@5025000 {
+ compatible = "sophgo,cv1800b-rtc", "syscon";
+ reg = <0x5025000 0x2000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>,
+ <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "alarm", "longpress", "vbat";
+ clocks = <&clk CLK_RTC_25M>,
+ <&clk CLK_SRC_RTC_SYS_0>;
+ clock-names = "rtc", "mcu";
+ };
};
};
non-removable;
};
+&gmac0 {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+};
+
&sdhci0 {
status = "okay";
bus-width = <4>;
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (C) 2025 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#ifndef _SOPHGO_CV18XX_RESET
+#define _SOPHGO_CV18XX_RESET
+
+#define RST_DDR 2
+#define RST_H264C 3
+#define RST_JPEG 4
+#define RST_H265C 5
+#define RST_VIPSYS 6
+#define RST_TDMA 7
+#define RST_TPU 8
+#define RST_TPUSYS 9
+#define RST_USB 11
+#define RST_ETH0 12
+#define RST_ETH1 13
+#define RST_NAND 14
+#define RST_EMMC 15
+#define RST_SD0 16
+#define RST_SDMA 18
+#define RST_I2S0 19
+#define RST_I2S1 20
+#define RST_I2S2 21
+#define RST_I2S3 22
+#define RST_UART0 23
+#define RST_UART1 24
+#define RST_UART2 25
+#define RST_UART3 26
+#define RST_I2C0 27
+#define RST_I2C1 28
+#define RST_I2C2 29
+#define RST_I2C3 30
+#define RST_I2C4 31
+#define RST_PWM0 32
+#define RST_PWM1 33
+#define RST_PWM2 34
+#define RST_PWM3 35
+#define RST_SPI0 40
+#define RST_SPI1 41
+#define RST_SPI2 42
+#define RST_SPI3 43
+#define RST_GPIO0 44
+#define RST_GPIO1 45
+#define RST_GPIO2 46
+#define RST_EFUSE 47
+#define RST_WDT 48
+#define RST_AHB_ROM 49
+#define RST_SPIC 50
+#define RST_TEMPSEN 51
+#define RST_SARADC 52
+#define RST_COMBO_PHY0 58
+#define RST_SPI_NAND 61
+#define RST_SE 62
+#define RST_UART4 74
+#define RST_GPIO3 75
+#define RST_SYSTEM 76
+#define RST_TIMER 77
+#define RST_TIMER0 78
+#define RST_TIMER1 79
+#define RST_TIMER2 80
+#define RST_TIMER3 81
+#define RST_TIMER4 82
+#define RST_TIMER5 83
+#define RST_TIMER6 84
+#define RST_TIMER7 85
+#define RST_WGN0 86
+#define RST_WGN1 87
+#define RST_WGN2 88
+#define RST_KEYSCAN 89
+#define RST_AUDDAC 91
+#define RST_AUDDAC_APB 92
+#define RST_AUDADC 93
+#define RST_VCSYS 95
+#define RST_ETHPHY 96
+#define RST_ETHPHY_APB 97
+#define RST_AUDSRC 98
+#define RST_VIP_CAM0 99
+#define RST_WDT1 100
+#define RST_WDT2 101
+#define RST_AUTOCLEAR_CPUCORE0 256
+#define RST_AUTOCLEAR_CPUCORE1 257
+#define RST_AUTOCLEAR_CPUCORE2 258
+#define RST_AUTOCLEAR_CPUCORE3 259
+#define RST_AUTOCLEAR_CPUSYS0 260
+#define RST_AUTOCLEAR_CPUSYS1 261
+#define RST_AUTOCLEAR_CPUSYS2 262
+#define RST_CPUCORE0 288
+#define RST_CPUCORE1 289
+#define RST_CPUCORE2 290
+#define RST_CPUCORE3 291
+#define RST_CPUSYS0 292
+#define RST_CPUSYS1 293
+#define RST_CPUSYS2 294
+
+#endif /* _SOPHGO_CV18XX_RESET */
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <0>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <1>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <2>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <3>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <4>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <5>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <6>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <7>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <8>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <9>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <10>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <11>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <12>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <13>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <14>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <15>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <16>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <17>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <18>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <19>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <20>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <21>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <22>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <23>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <24>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <25>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <26>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <27>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <28>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <29>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <30>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <31>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <32>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <33>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <34>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <35>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <36>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <37>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <38>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <39>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <40>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <41>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <42>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <43>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <44>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <45>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <46>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <47>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <48>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <49>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <50>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <51>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <52>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <53>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <54>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <55>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <56>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <57>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <58>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <59>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <60>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <61>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <62>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
riscv,isa = "rv64imafdc";
riscv,isa-base = "rv64i";
riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
- "zicntr", "zicsr", "zifencei",
- "zihpm";
+ "ziccrse", "zicntr", "zicsr",
+ "zifencei", "zihpm", "zfh",
+ "xtheadvector";
+ thead,vlenb = <16>;
reg = <63>;
i-cache-block-size = <64>;
i-cache-size = <65536>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Sophgo Technology Inc. All rights reserved.
+ */
+
+#include "sg2042.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sophgo SG2042 EVB V1.X";
+ compatible = "sophgo,sg2042-evb-v1", "sophgo,sg2042";
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-power {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power Key";
+ linux,code = <KEY_POWER>;
+ gpios = <&port0a 22 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_KEY>;
+ debounce-interval = <100>;
+ };
+ };
+
+ pwmfan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <103 128 179 230 255>;
+ pwms = <&pwm 0 40000 0>;
+ #cooling-cells = <2>;
+ };
+
+ thermal-zones {
+ soc-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+ thermal-sensors = <&mcu 0>;
+
+ trips {
+ soc_active1: soc-active1 {
+ temperature = <30000>;
+ hysteresis = <8000>;
+ type = "active";
+ };
+
+ soc_active2: soc-active2 {
+ temperature = <58000>;
+ hysteresis = <12000>;
+ type = "active";
+ };
+
+ soc_active3: soc-active3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+
+ soc_hot: soc-hot {
+ temperature = <80000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&soc_active1>;
+ cooling-device = <&pwmfan 0 1>;
+ };
+
+ map1 {
+ trip = <&soc_active2>;
+ cooling-device = <&pwmfan 1 2>;
+ };
+
+ map2 {
+ trip = <&soc_active3>;
+ cooling-device = <&pwmfan 2 3>;
+ };
+
+ map3 {
+ trip = <&soc_hot>;
+ cooling-device = <&pwmfan 3 4>;
+ };
+ };
+ };
+
+ board-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+ thermal-sensors = <&mcu 1>;
+
+ trips {
+ board_active: board-active {
+ temperature = <75000>;
+ hysteresis = <8000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map4 {
+ trip = <&board_active>;
+ cooling-device = <&pwmfan 3 4>;
+ };
+ };
+ };
+ };
+};
+
+&cgi_main {
+ clock-frequency = <25000000>;
+};
+
+&cgi_dpll0 {
+ clock-frequency = <25000000>;
+};
+
+&cgi_dpll1 {
+ clock-frequency = <25000000>;
+};
+
+&emmc {
+ pinctrl-0 = <&emmc_cfg>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ wp-inverted;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mcu: syscon@17 {
+ compatible = "sophgo,sg2042-hwmon-mcu";
+ reg = <0x17>;
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ phy0: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&port0a 27 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <100000>;
+ reset-deassert-us = <100000>;
+ };
+ };
+};
+
+&pinctrl {
+ emmc_cfg: sdhci-emmc-cfg {
+ sdhci-emmc-wp-pins {
+ pinmux = <PINMUX(PIN_EMMC_WP, 0)>;
+ bias-disable;
+ drive-strength-microamp = <26800>;
+ input-schmitt-disable;
+ };
+
+ sdhci-emmc-cd-pins {
+ pinmux = <PINMUX(PIN_EMMC_CD, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+
+ sdhci-emmc-rst-pwr-pins {
+ pinmux = <PINMUX(PIN_EMMC_RST, 0)>,
+ <PINMUX(PIN_EMMC_PWR_EN, 0)>;
+ bias-disable;
+ drive-strength-microamp = <26800>;
+ input-schmitt-disable;
+ };
+ };
+
+ i2c1_cfg: i2c1-cfg {
+ i2c1-pins {
+ pinmux = <PINMUX(PIN_IIC1_SDA, 0)>,
+ <PINMUX(PIN_IIC1_SCL, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+ };
+
+ sd_cfg: sdhci-sd-cfg {
+ sdhci-sd-cd-wp-pins {
+ pinmux = <PINMUX(PIN_SDIO_CD, 0)>,
+ <PINMUX(PIN_SDIO_WP, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+
+ sdhci-sd-rst-pwr-pins {
+ pinmux = <PINMUX(PIN_SDIO_RST, 0)>,
+ <PINMUX(PIN_SDIO_PWR_EN, 0)>;
+ bias-disable;
+ drive-strength-microamp = <26800>;
+ input-schmitt-disable;
+ };
+ };
+
+ uart0_cfg: uart0-cfg {
+ uart0-rx-pins {
+ pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+ <PINMUX(PIN_UART0_RX, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+ };
+};
+
+&sd {
+ pinctrl-0 = <&sd_cfg>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ wp-inverted;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Sophgo Technology Inc. All rights reserved.
+ */
+
+#include "sg2042.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sophgo SG2042 EVB V2.0";
+ compatible = "sophgo,sg2042-evb-v2", "sophgo,sg2042";
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ pwmfan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <103 128 179 230 255>;
+ pwms = <&pwm 0 40000 0>;
+ #cooling-cells = <2>;
+ };
+
+ thermal-zones {
+ soc-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+ thermal-sensors = <&mcu 0>;
+
+ trips {
+ soc_active1: soc-active1 {
+ temperature = <30000>;
+ hysteresis = <8000>;
+ type = "active";
+ };
+
+ soc_active2: soc-active2 {
+ temperature = <58000>;
+ hysteresis = <12000>;
+ type = "active";
+ };
+
+ soc_active3: soc-active3 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+
+ soc_hot: soc-hot {
+ temperature = <80000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&soc_active1>;
+ cooling-device = <&pwmfan 0 1>;
+ };
+
+ map1 {
+ trip = <&soc_active2>;
+ cooling-device = <&pwmfan 1 2>;
+ };
+
+ map2 {
+ trip = <&soc_active3>;
+ cooling-device = <&pwmfan 2 3>;
+ };
+
+ map3 {
+ trip = <&soc_hot>;
+ cooling-device = <&pwmfan 3 4>;
+ };
+ };
+ };
+
+ board-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+ thermal-sensors = <&mcu 1>;
+
+ trips {
+ board_active: board-active {
+ temperature = <75000>;
+ hysteresis = <8000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map4 {
+ trip = <&board_active>;
+ cooling-device = <&pwmfan 3 4>;
+ };
+ };
+ };
+ };
+};
+
+&cgi_main {
+ clock-frequency = <25000000>;
+};
+
+&cgi_dpll0 {
+ clock-frequency = <25000000>;
+};
+
+&cgi_dpll1 {
+ clock-frequency = <25000000>;
+};
+
+&emmc {
+ pinctrl-0 = <&emmc_cfg>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ wp-inverted;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mcu: syscon@17 {
+ compatible = "sophgo,sg2042-hwmon-mcu";
+ reg = <0x17>;
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ phy0: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&port0a 27 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <100000>;
+ reset-deassert-us = <100000>;
+ };
+ };
+};
+
+&pinctrl {
+ emmc_cfg: sdhci-emmc-cfg {
+ sdhci-emmc-wp-pins {
+ pinmux = <PINMUX(PIN_EMMC_WP, 0)>;
+ bias-disable;
+ drive-strength-microamp = <26800>;
+ input-schmitt-disable;
+ };
+
+ sdhci-emmc-cd-pins {
+ pinmux = <PINMUX(PIN_EMMC_CD, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+
+ sdhci-emmc-rst-pwr-pins {
+ pinmux = <PINMUX(PIN_EMMC_RST, 0)>,
+ <PINMUX(PIN_EMMC_PWR_EN, 0)>;
+ bias-disable;
+ drive-strength-microamp = <26800>;
+ input-schmitt-disable;
+ };
+ };
+
+ i2c1_cfg: i2c1-cfg {
+ i2c1-pins {
+ pinmux = <PINMUX(PIN_IIC1_SDA, 0)>,
+ <PINMUX(PIN_IIC1_SCL, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+ };
+
+ sd_cfg: sdhci-sd-cfg {
+ sdhci-sd-cd-wp-pins {
+ pinmux = <PINMUX(PIN_SDIO_CD, 0)>,
+ <PINMUX(PIN_SDIO_WP, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+
+ sdhci-sd-rst-pwr-pins {
+ pinmux = <PINMUX(PIN_SDIO_RST, 0)>,
+ <PINMUX(PIN_SDIO_PWR_EN, 0)>;
+ bias-disable;
+ drive-strength-microamp = <26800>;
+ input-schmitt-disable;
+ };
+ };
+
+ uart0_cfg: uart0-cfg {
+ uart0-rx-pins {
+ pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+ <PINMUX(PIN_UART0_RX, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <26800>;
+ input-schmitt-enable;
+ };
+ };
+};
+
+&sd {
+ pinctrl-0 = <&sd_cfg>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ wp-inverted;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+};
status = "disabled";
};
+ gmac0: ethernet@7040026000 {
+ compatible = "sophgo,sg2042-dwmac", "snps,dwmac-5.00a";
+ reg = <0x70 0x40026000 0x0 0x4000>;
+ clocks = <&clkgen GATE_CLK_AXI_ETH0>,
+ <&clkgen GATE_CLK_PTP_REF_I_ETH0>,
+ <&clkgen GATE_CLK_TX_ETH0>;
+ clock-names = "stmmaceth", "ptp_ref", "tx";
+ dma-noncoherent;
+ interrupt-parent = <&intc>;
+ interrupts = <132 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&rstgen RST_ETH0>;
+ reset-names = "stmmaceth";
+ snps,multicast-filter-bins = <0>;
+ snps,perfect-filter-entries = <1>;
+ snps,aal;
+ snps,tso;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+ status = "disabled";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <8>;
+ queue0 {};
+ queue1 {};
+ queue2 {};
+ queue3 {};
+ queue4 {};
+ queue5 {};
+ queue6 {};
+ queue7 {};
+ };
+
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <8>;
+ queue0 {};
+ queue1 {};
+ queue2 {};
+ queue3 {};
+ queue4 {};
+ queue5 {};
+ queue6 {};
+ queue7 {};
+ };
+
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <16 8 4 0 0 0 0>;
+ snps,wr_osr_lmt = <1>;
+ snps,rd_osr_lmt = <2>;
+ };
+ };
+
emmc: mmc@704002a000 {
compatible = "sophgo,sg2042-dwcmshc";
reg = <0x70 0x4002a000 0x0 0x1000>;
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu0_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu1_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu2_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu3_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu4_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu5_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu6_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu7_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu8_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu9_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu10_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu11_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu12_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu13_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu14_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu15_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu16_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu17_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu18_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu19_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu20_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu21_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu22_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu23_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu24_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu25_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu26_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu27_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu28_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu29_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu30_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu31_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu32_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu33_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu34_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu35_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu36_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu37_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu38_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu39_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu40_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu41_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu42_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu43_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu44_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu45_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu46_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu47_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu48_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu49_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu50_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu51_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu52_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu53_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu54_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu55_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu56_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu57_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu58_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu59_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu60_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu61_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu62_intc: interrupt-controller {
"zawrs", "zba", "zbb", "zbc",
"zbs", "zca", "zcb", "zcd",
"zfa", "zfbfmin", "zfh", "zfhmin",
- "zicbom", "zicbop", "zicboz",
+ "zicbom", "zicbop", "zicboz", "ziccrse",
"zicntr", "zicond","zicsr", "zifencei",
"zihintntl", "zihintpause", "zihpm",
"zvfbfmin", "zvfbfwma", "zvfh",
"zvfhmin";
riscv,cbom-block-size = <64>;
+ riscv,cbop-block-size = <64>;
riscv,cboz-block-size = <64>;
cpu63_intc: interrupt-controller {
};
};
+ pmu {
+ compatible = "riscv,pmu";
+ riscv,event-to-mhpmevent =
+ <0x00003 0x00000000 0x00000010>,
+ <0x00004 0x00000000 0x00000011>,
+ <0x00005 0x00000000 0x00000007>,
+ <0x00006 0x00000000 0x00000006>,
+ <0x00008 0x00000000 0x00000027>,
+ <0x00009 0x00000000 0x00000028>,
+ <0x10000 0x00000000 0x0000000c>,
+ <0x10001 0x00000000 0x0000000d>,
+ <0x10002 0x00000000 0x0000000e>,
+ <0x10003 0x00000000 0x0000000f>,
+ <0x10008 0x00000000 0x00000001>,
+ <0x10009 0x00000000 0x00000002>,
+ <0x10010 0x00000000 0x00000010>,
+ <0x10011 0x00000000 0x00000011>,
+ <0x10012 0x00000000 0x00000012>,
+ <0x10013 0x00000000 0x00000013>,
+ <0x10019 0x00000000 0x00000004>,
+ <0x10021 0x00000000 0x00000003>,
+ <0x10030 0x00000000 0x0000001c>,
+ <0x10031 0x00000000 0x0000001b>;
+ riscv,event-to-mhpmcounters =
+ <0x00003 0x00003 0xfffffff8>,
+ <0x00004 0x00004 0xfffffff8>,
+ <0x00005 0x00005 0xfffffff8>,
+ <0x00006 0x00006 0xfffffff8>,
+ <0x00007 0x00007 0xfffffff8>,
+ <0x00008 0x00008 0xfffffff8>,
+ <0x00009 0x00009 0xfffffff8>,
+ <0x0000a 0x0000a 0xfffffff8>,
+ <0x10000 0x10000 0xfffffff8>,
+ <0x10001 0x10001 0xfffffff8>,
+ <0x10002 0x10002 0xfffffff8>,
+ <0x10003 0x10003 0xfffffff8>,
+ <0x10008 0x10008 0xfffffff8>,
+ <0x10009 0x10009 0xfffffff8>,
+ <0x10010 0x10010 0xfffffff8>,
+ <0x10011 0x10011 0xfffffff8>,
+ <0x10012 0x10012 0xfffffff8>,
+ <0x10013 0x10013 0xfffffff8>,
+ <0x10019 0x10019 0xfffffff8>,
+ <0x10021 0x10021 0xfffffff8>,
+ <0x10030 0x10030 0xfffffff8>,
+ <0x10031 0x10031 0xfffffff8>;
+ riscv,raw-event-to-mhpmcounters =
+ <0x00000000 0x00000001 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000002 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000003 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000004 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000005 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000006 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000007 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000008 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000009 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000000a 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000000b 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000000c 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000000d 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000000e 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000000f 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000010 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000011 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000012 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000013 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000014 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000015 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000016 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000017 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000018 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000019 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000001a 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000001b 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000001c 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000001d 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000001e 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000001f 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000020 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000021 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000022 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000023 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000024 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000025 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000026 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000027 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000028 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x00000029 0xffffffff 0xffffffff 0xfffffff8>,
+ <0x00000000 0x0000002a 0xffffffff 0xffffffff 0xfffffff8>;
+ };
+
soc {
intc: interrupt-controller@6d40000000 {
compatible = "sophgo,sg2044-plic", "thead,c900-plic";
clock-frequency = <25000000>;
};
+&emmc {
+ bus-width = <4>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ wp-inverted;
+ status = "okay";
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ phy0: phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ reset-gpios = <&porta 28 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ rx-internal-delay-ps = <2050>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ mcu: syscon@17 {
+ compatible = "sophgo,sg2044-hwmon-mcu", "sophgo,sg2042-hwmon-mcu";
+ reg = <0x17>;
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+&msi {
+ status = "okay";
+};
+
+&pcie0 {
+ bus-range = <0x00 0xff>;
+ linux,pci-domain = <1>;
+ status = "okay";
+};
+
+&pcie1 {
+ bus-range = <0x00 0xff>;
+ linux,pci-domain = <0>;
+ status = "okay";
+};
+
+&pcie2 {
+ bus-range = <0x00 0xff>;
+ linux,pci-domain = <3>;
+ status = "okay";
+};
+
+&pcie3 {
+ bus-range = <0x00 0xff>;
+ linux,pci-domain = <2>;
+ status = "okay";
+};
+
+&pcie4 {
+ bus-range = <0x00 0xff>;
+ linux,pci-domain = <4>;
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&sd {
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ wp-inverted;
+ status = "okay";
+};
+
+&uart0 {
+ /* for firmware */
+ status = "reserved";
+};
+
&uart1 {
status = "okay";
};
* Copyright (C) 2025 Inochi Amaoto <inochiama@gmail.com>
*/
+#include <dt-bindings/clock/sophgo,sg2044-pll.h>
+#include <dt-bindings/clock/sophgo,sg2044-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-sg2044.h>
#include "sg2044-cpus.dtsi"
#include "sg2044-reset.h"
#size-cells = <2>;
ranges;
+ pcie0: pcie@6c00000000 {
+ compatible = "sophgo,sg2044-pcie";
+ reg = <0x6c 0x00000000 0x0 0x00001000>,
+ <0x6c 0x00300000 0x0 0x00004000>,
+ <0x48 0x00000000 0x0 0x00001000>,
+ <0x6c 0x000c0000 0x0 0x00001000>;
+ reg-names = "dbi", "atu", "config", "app";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ clocks = <&clk CLK_GATE_PCIE_1G>;
+ clock-names = "core";
+ device_type = "pci";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ msi-parent = <&msi>;
+ ranges = <0x01000000 0x0 0x00000000 0x48 0x10000000 0x0 0x00200000>,
+ <0x42000000 0x0 0x10000000 0x0 0x10000000 0x0 0x04000000>,
+ <0x02000000 0x0 0x14000000 0x0 0x14000000 0x0 0x04000000>,
+ <0x43000000 0x4a 0x00000000 0x4a 0x00000000 0x2 0x00000000>,
+ <0x03000000 0x49 0x00000000 0x49 0x00000000 0x1 0x00000000>;
+ status = "disabled";
+
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+ };
+
+ pcie1: pcie@6c00400000 {
+ compatible = "sophgo,sg2044-pcie";
+ reg = <0x6c 0x00400000 0x0 0x00001000>,
+ <0x6c 0x00700000 0x0 0x00004000>,
+ <0x40 0x00000000 0x0 0x00001000>,
+ <0x6c 0x00780000 0x0 0x00001000>;
+ reg-names = "dbi", "atu", "config", "app";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ clocks = <&clk CLK_GATE_PCIE_1G>;
+ clock-names = "core";
+ device_type = "pci";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ msi-parent = <&msi>;
+ ranges = <0x01000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00200000>,
+ <0x42000000 0x0 0x00000000 0x0 0x00000000 0x0 0x04000000>,
+ <0x02000000 0x0 0x04000000 0x0 0x04000000 0x0 0x04000000>,
+ <0x43000000 0x42 0x00000000 0x42 0x00000000 0x2 0x00000000>,
+ <0x03000000 0x41 0x00000000 0x41 0x00000000 0x1 0x00000000>;
+ status = "disabled";
+
+ pcie_intc1: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+ };
+
+ pcie2: pcie@6c04000000 {
+ compatible = "sophgo,sg2044-pcie";
+ reg = <0x6c 0x04000000 0x0 0x00001000>,
+ <0x6c 0x04300000 0x0 0x00004000>,
+ <0x58 0x00000000 0x0 0x00001000>,
+ <0x6c 0x040c0000 0x0 0x00001000>;
+ reg-names = "dbi", "atu", "config", "app";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ clocks = <&clk CLK_GATE_PCIE_1G>;
+ clock-names = "core";
+ device_type = "pci";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc2 0>,
+ <0 0 0 2 &pcie_intc2 1>,
+ <0 0 0 3 &pcie_intc2 2>,
+ <0 0 0 4 &pcie_intc2 3>;
+ msi-parent = <&msi>;
+ ranges = <0x01000000 0x0 0x00000000 0x58 0x10000000 0x0 0x00200000>,
+ <0x42000000 0x0 0x30000000 0x0 0x30000000 0x0 0x04000000>,
+ <0x02000000 0x0 0x34000000 0x0 0x34000000 0x0 0x04000000>,
+ <0x43000000 0x5a 0x00000000 0x5a 0x00000000 0x2 0x00000000>,
+ <0x03000000 0x59 0x00000000 0x59 0x00000000 0x1 0x00000000>;
+ status = "disabled";
+
+ pcie_intc2: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+ };
+
+ pcie3: pcie@6c04400000 {
+ compatible = "sophgo,sg2044-pcie";
+ reg = <0x6c 0x04400000 0x0 0x00001000>,
+ <0x6c 0x04700000 0x0 0x00004000>,
+ <0x50 0x00000000 0x0 0x00001000>,
+ <0x6c 0x04780000 0x0 0x00001000>;
+ reg-names = "dbi", "atu", "config", "app";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ clocks = <&clk CLK_GATE_PCIE_1G>;
+ clock-names = "core";
+ device_type = "pci";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc3 0>,
+ <0 0 0 2 &pcie_intc3 1>,
+ <0 0 0 3 &pcie_intc3 2>,
+ <0 0 0 4 &pcie_intc3 3>;
+ msi-parent = <&msi>;
+ ranges = <0x01000000 0x0 0x00000000 0x50 0x10000000 0x0 0x00200000>,
+ <0x42000000 0x0 0x20000000 0x0 0x20000000 0x0 0x04000000>,
+ <0x02000000 0x0 0x24000000 0x0 0x24000000 0x0 0x04000000>,
+ <0x43000000 0x52 0x00000000 0x52 0x00000000 0x2 0x00000000>,
+ <0x03000000 0x51 0x00000000 0x51 0x00000000 0x1 0x00000000>;
+ status = "disabled";
+
+ pcie_intc3: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+ };
+
+ pcie4: pcie@6c08400000 {
+ compatible = "sophgo,sg2044-pcie";
+ reg = <0x6c 0x08400000 0x0 0x00001000>,
+ <0x6c 0x08700000 0x0 0x00004000>,
+ <0x60 0x00000000 0x0 0x00001000>,
+ <0x6c 0x08780000 0x0 0x00001000>;
+ reg-names = "dbi", "atu", "config", "app";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ clocks = <&clk CLK_GATE_PCIE_1G>;
+ clock-names = "core";
+ device_type = "pci";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc4 0>,
+ <0 0 0 2 &pcie_intc4 1>,
+ <0 0 0 3 &pcie_intc4 2>,
+ <0 0 0 4 &pcie_intc4 3>;
+ msi-parent = <&msi>;
+ ranges = <0x01000000 0x0 0x00000000 0x60 0x10000000 0x0 0x00200000>,
+ <0x42000000 0x0 0x40000000 0x0 0x40000000 0x0 0x04000000>,
+ <0x02000000 0x0 0x44000000 0x0 0x44000000 0x0 0x04000000>,
+ <0x43000000 0x62 0x00000000 0x62 0x00000000 0x2 0x00000000>,
+ <0x03000000 0x61 0x00000000 0x61 0x00000000 0x1 0x00000000>;
+ status = "disabled";
+
+ pcie_intc4: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&intc>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+ };
+
+ msi: msi-controller@6d50000000 {
+ compatible = "sophgo,sg2044-msi";
+ reg = <0x6d 0x50000000 0x0 0x800>,
+ <0x0 0x7ee00000 0x0 0x40>;
+ reg-names = "clr", "doorbell";
+ #msi-cells = <0>;
+ msi-controller;
+ msi-ranges = <&intc 352 IRQ_TYPE_LEVEL_HIGH 512>;
+ status = "disabled";
+ };
+
+ spifmc0: spi@7001000000 {
+ compatible = "sophgo,sg2044-spifmc-nor";
+ reg = <0x70 0x01000000 0x0 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_GATE_AHB_SPIFMC>;
+ interrupt-parent = <&intc>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_SPIFMC0>;
+ status = "disabled";
+ };
+
+ spifmc1: spi@7005000000 {
+ compatible = "sophgo,sg2044-spifmc-nor";
+ reg = <0x70 0x05000000 0x0 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_GATE_AHB_SPIFMC>;
+ interrupt-parent = <&intc>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_SPIFMC1>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@7020000000 {
+ compatible = "snps,axi-dma-1.01a";
+ reg = <0x70 0x20000000 0x0 0x10000>;
+ #dma-cells = <1>;
+ clock-names = "core-clk", "cfgr-clk";
+ clocks = <&clk CLK_GATE_SYSDMA_AXI>,
+ <&clk CLK_GATE_SYSDMA_AXI>;
+ dma-noncoherent;
+ interrupt-parent = <&intc>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <8>;
+ snps,priority = <0 1 2 3 4 5 6 7>;
+ snps,block-size = <4096 4096 4096 4096
+ 4096 4096 4096 4096>;
+ snps,dma-masters = <2>;
+ snps,data-width = <2>;
+ snps,axi-max-burst-len = <4>;
+ status = "disabled";
+ };
+
uart0: serial@7030000000 {
compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
reg = <0x70 0x30000000 0x0 0x1000>;
clock-frequency = <500000000>;
+ clocks = <&clk CLK_GATE_UART_500M>,
+ <&clk CLK_GATE_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupt-parent = <&intc>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
reg = <0x70 0x30001000 0x0 0x1000>;
clock-frequency = <500000000>;
+ clocks = <&clk CLK_GATE_UART_500M>,
+ <&clk CLK_GATE_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupt-parent = <&intc>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
reg = <0x70 0x30002000 0x0 0x1000>;
clock-frequency = <500000000>;
+ clocks = <&clk CLK_GATE_UART_500M>,
+ <&clk CLK_GATE_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupt-parent = <&intc>;
interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart";
reg = <0x70 0x30003000 0x0 0x1000>;
clock-frequency = <500000000>;
+ clocks = <&clk CLK_GATE_UART_500M>,
+ <&clk CLK_GATE_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupt-parent = <&intc>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
status = "disabled";
};
+ gmac0: ethernet@7030006000 {
+ compatible = "sophgo,sg2044-dwmac", "snps,dwmac-5.30a";
+ reg = <0x70 0x30006000 0x0 0x4000>;
+ clocks = <&clk CLK_GATE_AXI_ETH0>,
+ <&clk CLK_GATE_PTP_REF_I_ETH0>,
+ <&clk CLK_GATE_TX_ETH0>;
+ clock-names = "stmmaceth", "ptp_ref", "tx";
+ dma-noncoherent;
+ interrupt-parent = <&intc>;
+ interrupts = <296 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&rst RST_ETH0>;
+ reset-names = "stmmaceth";
+ snps,multicast-filter-bins = <0>;
+ snps,perfect-filter-entries = <1>;
+ snps,aal;
+ snps,tso;
+ snps,txpbl = <32>;
+ snps,rxpbl = <32>;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+ status = "disabled";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <8>;
+ snps,rx-sched-wsp;
+ queue0 {};
+ queue1 {};
+ queue2 {};
+ queue3 {};
+ queue4 {};
+ queue5 {};
+ queue6 {};
+ queue7 {};
+ };
+
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <8>;
+ queue0 {};
+ queue1 {};
+ queue2 {};
+ queue3 {};
+ queue4 {};
+ queue5 {};
+ queue6 {};
+ queue7 {};
+ };
+
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <16 8 4 0 0 0 0>;
+ snps,wr_osr_lmt = <1>;
+ snps,rd_osr_lmt = <2>;
+ };
+ };
+
+ emmc: mmc@703000a000 {
+ compatible = "sophgo,sg2044-dwcmshc", "sophgo,sg2042-dwcmshc";
+ reg = <0x70 0x3000a000 0x0 0x1000>;
+ clocks = <&clk CLK_GATE_EMMC>,
+ <&clk CLK_GATE_AXI_EMMC>,
+ <&clk CLK_GATE_EMMC_100K>;
+ clock-names = "core", "bus", "timer";
+ interrupt-parent = <&intc>;
+ interrupts = <298 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sd: mmc@703000b000 {
+ compatible = "sophgo,sg2044-dwcmshc", "sophgo,sg2042-dwcmshc";
+ reg = <0x70 0x3000b000 0x0 0x1000>;
+ clocks = <&clk CLK_GATE_SD>,
+ <&clk CLK_GATE_AXI_SD>,
+ <&clk CLK_GATE_SD_100K>;
+ clock-names = "core", "bus", "timer";
+ interrupt-parent = <&intc>;
+ interrupts = <300 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@7040005000 {
+ compatible = "sophgo,sg2044-i2c", "snps,designware-i2c";
+ reg = <0x70 0x40005000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ clocks = <&clk CLK_GATE_APB_I2C>;
+ clock-names = "ref";
+ interrupt-parent = <&intc>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@7040006000 {
+ compatible = "sophgo,sg2044-i2c", "snps,designware-i2c";
+ reg = <0x70 0x40006000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ clocks = <&clk CLK_GATE_APB_I2C>;
+ clock-names = "ref";
+ interrupt-parent = <&intc>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@7040007000 {
+ compatible = "sophgo,sg2044-i2c", "snps,designware-i2c";
+ reg = <0x70 0x40007000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ clocks = <&clk CLK_GATE_APB_I2C>;
+ clock-names = "ref";
+ interrupt-parent = <&intc>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@7040008000 {
+ compatible = "sophgo,sg2044-i2c", "snps,designware-i2c";
+ reg = <0x70 0x40008000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ clocks = <&clk CLK_GATE_APB_I2C>;
+ clock-names = "ref";
+ interrupt-parent = <&intc>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rst RST_I2C3>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@7040009000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x70 0x40009000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_GATE_APB_GPIO>,
+ <&clk CLK_GATE_GPIO_DB>;
+ clock-names = "bus", "db";
+ resets = <&rst RST_GPIO0>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@704000a000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x70 0x4000a000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_GATE_APB_GPIO>,
+ <&clk CLK_GATE_GPIO_DB>;
+ clock-names = "bus", "db";
+ resets = <&rst RST_GPIO1>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@704000b000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x70 0x4000b000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk CLK_GATE_APB_GPIO>,
+ <&clk CLK_GATE_GPIO_DB>;
+ clock-names = "bus", "db";
+ resets = <&rst RST_GPIO2>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ pwm: pwm@704000c000 {
+ compatible = "sophgo,sg2044-pwm";
+ reg = <0x70 0x4000c000 0x0 0x1000>;
+ #pwm-cells = <3>;
+ clocks = <&clk CLK_GATE_APB_PWM>;
+ clock-names = "apb";
+ resets = <&rst RST_PWM>;
+ status = "disabled";
+ };
+
+ syscon: syscon@7050000000 {
+ compatible = "sophgo,sg2044-top-syscon", "syscon";
+ reg = <0x70 0x50000000 0x0 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&osc>;
+ };
+
+ pinctrl: pinctrl@7050001000 {
+ compatible = "sophgo,sg2044-pinctrl";
+ reg = <0x70 0x50001000 0x0 0x1000>;
+ };
+
+ clk: clock-controller@7050002000 {
+ compatible = "sophgo,sg2044-clk";
+ reg = <0x70 0x50002000 0x0 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&syscon CLK_FPLL0>, <&syscon CLK_FPLL1>,
+ <&syscon CLK_FPLL2>, <&syscon CLK_DPLL0>,
+ <&syscon CLK_DPLL1>, <&syscon CLK_DPLL2>,
+ <&syscon CLK_DPLL3>, <&syscon CLK_DPLL4>,
+ <&syscon CLK_DPLL5>, <&syscon CLK_DPLL6>,
+ <&syscon CLK_DPLL7>, <&syscon CLK_MPLL0>,
+ <&syscon CLK_MPLL1>, <&syscon CLK_MPLL2>,
+ <&syscon CLK_MPLL3>, <&syscon CLK_MPLL4>,
+ <&syscon CLK_MPLL5>;
+ clock-names = "fpll0", "fpll1", "fpll2", "dpll0",
+ "dpll1", "dpll2", "dpll3", "dpll4",
+ "dpll5", "dpll6", "dpll7", "mpll0",
+ "mpll1", "mpll2", "mpll3", "mpll4",
+ "mpll5";
+ };
+
rst: reset-controller@7050003000 {
compatible = "sophgo,sg2044-reset",
"sophgo,sg2042-reset";
};
};
+&emmc {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_2_cfg>;
drive-strength = <32>;
};
};
+
+ pwm14_1_cfg: pwm14-1-cfg {
+ pwm14-1-pins {
+ pinmux = <K1_PADCONF(44, 4)>;
+ bias-pull-up = <0>;
+ drive-strength = <32>;
+ };
+ };
};
dma-noncoherent;
ranges;
+ syscon_rcpu: system-controller@c0880000 {
+ compatible = "spacemit,k1-syscon-rcpu";
+ reg = <0x0 0xc0880000 0x0 0x2048>;
+ #reset-cells = <1>;
+ };
+
+ syscon_rcpu2: system-controller@c0888000 {
+ compatible = "spacemit,k1-syscon-rcpu2";
+ reg = <0x0 0xc0888000 0x0 0x28>;
+ #reset-cells = <1>;
+ };
+
syscon_apbc: system-controller@d4015000 {
compatible = "spacemit,k1-syscon-apbc";
reg = <0x0 0xd4015000 0x0 0x1000>;
#reset-cells = <1>;
};
- uart0: serial@d4017000 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017000 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART0>,
- <&syscon_apbc CLK_UART0_BUS>;
+ gpio: gpio@d4019000 {
+ compatible = "spacemit,k1-gpio";
+ reg = <0x0 0xd4019000 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_GPIO>,
+ <&syscon_apbc CLK_GPIO_BUS>;
clock-names = "core", "bus";
- interrupts = <42>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupts = <58>;
+ interrupt-parent = <&plic>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ gpio-ranges = <&pinctrl 0 0 0 32>,
+ <&pinctrl 1 0 32 32>,
+ <&pinctrl 2 0 64 32>,
+ <&pinctrl 3 0 96 32>;
};
- uart2: serial@d4017100 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017100 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART2>,
- <&syscon_apbc CLK_UART2_BUS>;
- clock-names = "core", "bus";
- interrupts = <44>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm0: pwm@d401a000 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401a000 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM0>;
+ resets = <&syscon_apbc RESET_PWM0>;
status = "disabled";
};
- uart3: serial@d4017200 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017200 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART3>,
- <&syscon_apbc CLK_UART3_BUS>;
- clock-names = "core", "bus";
- interrupts = <45>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm1: pwm@d401a400 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401a400 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM1>;
+ resets = <&syscon_apbc RESET_PWM1>;
status = "disabled";
};
- uart4: serial@d4017300 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017300 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART4>,
- <&syscon_apbc CLK_UART4_BUS>;
- clock-names = "core", "bus";
- interrupts = <46>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm2: pwm@d401a800 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401a800 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM2>;
+ resets = <&syscon_apbc RESET_PWM2>;
status = "disabled";
};
- uart5: serial@d4017400 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017400 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART5>,
- <&syscon_apbc CLK_UART5_BUS>;
- clock-names = "core", "bus";
- interrupts = <47>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm3: pwm@d401ac00 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401ac00 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM3>;
+ resets = <&syscon_apbc RESET_PWM3>;
status = "disabled";
};
- uart6: serial@d4017500 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017500 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART6>,
- <&syscon_apbc CLK_UART6_BUS>;
- clock-names = "core", "bus";
- interrupts = <48>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm4: pwm@d401b000 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401b000 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM4>;
+ resets = <&syscon_apbc RESET_PWM4>;
status = "disabled";
};
- uart7: serial@d4017600 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017600 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART7>,
- <&syscon_apbc CLK_UART7_BUS>;
- clock-names = "core", "bus";
- interrupts = <49>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm5: pwm@d401b400 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401b400 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM5>;
+ resets = <&syscon_apbc RESET_PWM5>;
status = "disabled";
};
- uart8: serial@d4017700 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017700 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART8>,
- <&syscon_apbc CLK_UART8_BUS>;
- clock-names = "core", "bus";
- interrupts = <50>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm6: pwm@d401b800 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401b800 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM6>;
+ resets = <&syscon_apbc RESET_PWM6>;
status = "disabled";
};
- uart9: serial@d4017800 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xd4017800 0x0 0x100>;
- clocks = <&syscon_apbc CLK_UART9>,
- <&syscon_apbc CLK_UART9_BUS>;
- clock-names = "core", "bus";
- interrupts = <51>;
- reg-shift = <2>;
- reg-io-width = <4>;
+ pwm7: pwm@d401bc00 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd401bc00 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM7>;
+ resets = <&syscon_apbc RESET_PWM7>;
status = "disabled";
};
- gpio: gpio@d4019000 {
- compatible = "spacemit,k1-gpio";
- reg = <0x0 0xd4019000 0x0 0x100>;
- clocks = <&syscon_apbc CLK_GPIO>,
- <&syscon_apbc CLK_GPIO_BUS>;
- clock-names = "core", "bus";
- gpio-controller;
- #gpio-cells = <3>;
- interrupts = <58>;
- interrupt-parent = <&plic>;
- interrupt-controller;
- #interrupt-cells = <3>;
- gpio-ranges = <&pinctrl 0 0 0 32>,
- <&pinctrl 1 0 32 32>,
- <&pinctrl 2 0 64 32>,
- <&pinctrl 3 0 96 32>;
- };
-
pinctrl: pinctrl@d401e000 {
compatible = "spacemit,k1-pinctrl";
reg = <0x0 0xd401e000 0x0 0x400>;
clock-names = "func", "bus";
};
+ pwm8: pwm@d4020000 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4020000 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM8>;
+ resets = <&syscon_apbc RESET_PWM8>;
+ status = "disabled";
+ };
+
+ pwm9: pwm@d4020400 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4020400 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM9>;
+ resets = <&syscon_apbc RESET_PWM9>;
+ status = "disabled";
+ };
+
+ pwm10: pwm@d4020800 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4020800 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM10>;
+ resets = <&syscon_apbc RESET_PWM10>;
+ status = "disabled";
+ };
+
+ pwm11: pwm@d4020c00 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4020c00 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM11>;
+ resets = <&syscon_apbc RESET_PWM11>;
+ status = "disabled";
+ };
+
+ pwm12: pwm@d4021000 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4021000 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM12>;
+ resets = <&syscon_apbc RESET_PWM12>;
+ status = "disabled";
+ };
+
+ pwm13: pwm@d4021400 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4021400 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM13>;
+ resets = <&syscon_apbc RESET_PWM13>;
+ status = "disabled";
+ };
+
+ pwm14: pwm@d4021800 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4021800 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM14>;
+ resets = <&syscon_apbc RESET_PWM14>;
+ status = "disabled";
+ };
+
+ pwm15: pwm@d4021c00 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4021c00 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM15>;
+ resets = <&syscon_apbc RESET_PWM15>;
+ status = "disabled";
+ };
+
+ pwm16: pwm@d4022000 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4022000 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM16>;
+ resets = <&syscon_apbc RESET_PWM16>;
+ status = "disabled";
+ };
+
+ pwm17: pwm@d4022400 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4022400 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM17>;
+ resets = <&syscon_apbc RESET_PWM17>;
+ status = "disabled";
+ };
+
+ pwm18: pwm@d4022800 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4022800 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM18>;
+ resets = <&syscon_apbc RESET_PWM18>;
+ status = "disabled";
+ };
+
+ pwm19: pwm@d4022c00 {
+ compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm";
+ reg = <0x0 0xd4022c00 0x0 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&syscon_apbc CLK_PWM19>;
+ resets = <&syscon_apbc RESET_PWM19>;
+ status = "disabled";
+ };
+
syscon_mpmu: system-controller@d4050000 {
compatible = "spacemit,k1-syscon-mpmu";
reg = <0x0 0xd4050000 0x0 0x209c>;
<&cpu7_intc 3>, <&cpu7_intc 7>;
};
- sec_uart1: serial@f0612000 {
- compatible = "spacemit,k1-uart", "intel,xscale-uart";
- reg = <0x0 0xf0612000 0x0 0x100>;
- interrupts = <43>;
- clock-frequency = <14857000>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "reserved"; /* for TEE usage */
+ syscon_apbc2: system-controller@f0610000 {
+ compatible = "spacemit,k1-syscon-apbc2";
+ reg = <0x0 0xf0610000 0x0 0x20>;
+ #reset-cells = <1>;
+ };
+
+ camera-bus {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
+ <0x0 0x80000000 0x1 0x00000000 0x1 0x80000000>;
+ };
+
+ dma-bus {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
+ <0x1 0x00000000 0x1 0x80000000 0x3 0x00000000>;
+
+ uart0: serial@d4017000 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017000 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART0>,
+ <&syscon_apbc CLK_UART0_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <42>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@d4017100 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017100 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART2>,
+ <&syscon_apbc CLK_UART2_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <44>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@d4017200 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017200 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART3>,
+ <&syscon_apbc CLK_UART3_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <45>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart4: serial@d4017300 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017300 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART4>,
+ <&syscon_apbc CLK_UART4_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <46>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial@d4017400 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017400 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART5>,
+ <&syscon_apbc CLK_UART5_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <47>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart6: serial@d4017500 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017500 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART6>,
+ <&syscon_apbc CLK_UART6_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <48>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart7: serial@d4017600 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017600 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART7>,
+ <&syscon_apbc CLK_UART7_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <49>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart8: serial@d4017700 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017700 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART8>,
+ <&syscon_apbc CLK_UART8_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <50>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart9: serial@d4017800 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xd4017800 0x0 0x100>;
+ clocks = <&syscon_apbc CLK_UART9>,
+ <&syscon_apbc CLK_UART9_BUS>;
+ clock-names = "core", "bus";
+ interrupts = <51>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ sec_uart1: serial@f0612000 {
+ compatible = "spacemit,k1-uart",
+ "intel,xscale-uart";
+ reg = <0x0 0xf0612000 0x0 0x100>;
+ interrupts = <43>;
+ clock-frequency = <14857000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "reserved"; /* for TEE usage */
+ };
+ };
+
+ multimedia-bus {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
+ <0x0 0x80000000 0x1 0x00000000 0x3 0x80000000>;
+ };
+
+ network-bus {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
+ <0x0 0x80000000 0x1 0x00000000 0x0 0x80000000>;
+ };
+
+ pcie-bus {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
+ <0x0 0xb8000000 0x1 0x38000000 0x3 0x48000000>;
+ };
+
+ storage-bus {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+
+ emmc: mmc@d4281000 {
+ compatible = "spacemit,k1-sdhci";
+ reg = <0x0 0xd4281000 0x0 0x200>;
+ clocks = <&syscon_apmu CLK_SDH_AXI>,
+ <&syscon_apmu CLK_SDH2>;
+ clock-names = "core", "io";
+ interrupts = <101>;
+ status = "disabled";
+ };
};
};
};
#include "jh7110.dtsi"
#include "jh7110-pinfunc.h"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
/ {
priority = <224>;
};
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_power: led-0 {
+ gpios = <&aongpio 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
pwmdac_codec: audio-codec {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
};
&gmac0 {
- starfive,tx-use-rgmii-clk;
assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+ starfive,tx-use-rgmii-clk;
status = "okay";
};
};
&phy0 {
- motorcomm,tx-clk-adj-enabled;
+ rx-internal-delay-ps = <1500>;
+ tx-internal-delay-ps = <1500>;
+ motorcomm,rx-clk-drv-microamp = <3970>;
+ motorcomm,rx-data-drv-microamp = <2910>;
motorcomm,tx-clk-10-inverted;
motorcomm,tx-clk-100-inverted;
motorcomm,tx-clk-1000-inverted;
- motorcomm,rx-clk-drv-microamp = <3970>;
- motorcomm,rx-data-drv-microamp = <2910>;
- rx-internal-delay-ps = <1500>;
- tx-internal-delay-ps = <1500>;
+ motorcomm,tx-clk-adj-enabled;
};
&pwm {
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/thead,th1520-clk-ap.h>
#include <dt-bindings/power/thead,th1520-power.h>
+#include <dt-bindings/reset/thead,th1520-reset.h>
/ {
compatible = "thead,th1520";
compatible = "thead,th1520-aon";
mboxes = <&mbox_910t 1>;
mbox-names = "aon";
+ resets = <&rst TH1520_RESET_ID_GPU_CLKGEN>;
+ reset-names = "gpu-clkgen";
#power-domain-cells = <1>;
};
reg-names = "dwmac", "apb";
interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>;
- clock-names = "stmmaceth", "pclk";
+ clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>,
+ <&clk CLK_PERISYS_APB4_HCLK>;
+ clock-names = "stmmaceth", "pclk", "apb";
snps,pbl = <32>;
snps,fixed-burst;
snps,multicast-filter-bins = <64>;
reg-names = "dwmac", "apb";
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>;
- clock-names = "stmmaceth", "pclk";
+ clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>,
+ <&clk CLK_PERISYS_APB4_HCLK>;
+ clock-names = "stmmaceth", "pclk", "apb";
snps,pbl = <32>;
snps,fixed-burst;
snps,multicast-filter-bins = <64>;
thead,pad-group = <1>;
};
+ pvt: pvt@fffff4e000 {
+ compatible = "moortec,mr75203";
+ reg = <0xff 0xfff4e000 0x0 0x80>,
+ <0xff 0xfff4e080 0x0 0x100>,
+ <0xff 0xfff4e180 0x0 0x680>,
+ <0xff 0xfff4e800 0x0 0x600>;
+ reg-names = "common", "ts", "pd", "vm";
+ clocks = <&aonsys_clk>;
+ #thermal-sensor-cells = <1>;
+ };
+
gpio@fffff52000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xfff52000 0x0 0x1000>;
projects / thirdparty / u-boot.git / commitdiff
