dt-bindings: iio: adc: adi,ad4695: add SPI offload properties

Add a pwms property to the adi,ad4695 binding to specify an optional PWM
output connected to the CNV pin on the ADC.

Also add #trigger-source-cells property to allow the BUSY output to be
used as a SPI offload trigger source to indicate when a sample is ready
to be read.

Macros are added to adi,ad4695.h for the cell values to help with
readability since they are arbitrary values.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-13-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
index 7d2229dee4441e20a7bafc9165fe309ac2e9eada..cbde7a0505d2b5df22c54ca4556878bf22e9b4b1 100644 (file)
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
@@ -84,6 +84,10 @@ properties:
     description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW.
     maxItems: 1
 
+  pwms:
+    description: PWM signal connected to the CNV pin.
+    maxItems: 1
+
   interrupts:
     minItems: 1
     items:
@@ -106,6 +110,15 @@ properties:
       The first cell is the GPn number: 0 to 3.
       The second cell takes standard GPIO flags.
 
+  '#trigger-source-cells':
+    description: |
+      First cell indicates the output signal: 0 = BUSY, 1 = ALERT.
+      Second cell indicates which GPn pin is used: 0, 2 or 3.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad4695.h.
+    const: 2
+
   "#address-cells":
     const: 1
 

diff --git a/include/dt-bindings/iio/adc/adi,ad4695.h b/include/dt-bindings/iio/adc/adi,ad4695.h
index 9fbef542bf670015c5b34bfbe1336e7e295bf8ab..fea4525d2710cbf58cd4236d3276bad4cb318df9 100644 (file)
--- a/include/dt-bindings/iio/adc/adi,ad4695.h
+++ b/include/dt-bindings/iio/adc/adi,ad4695.h
@@ -6,4 +6,11 @@
 #define AD4695_COMMON_MODE_REFGND      0xFF
 #define AD4695_COMMON_MODE_COM         0xFE
 
+#define AD4695_TRIGGER_EVENT_BUSY      0
+#define AD4695_TRIGGER_EVENT_ALERT     1
+
+#define AD4695_TRIGGER_PIN_GP0         0
+#define AD4695_TRIGGER_PIN_GP2         2
+#define AD4695_TRIGGER_PIN_GP3         3
+
 #endif /* _DT_BINDINGS_ADI_AD4695_H */