Add ChangeLog entries for v2.4

Signed-off-by: Jouni Malinen <j@w1.fi>

diff --git a/hostapd/ChangeLog b/hostapd/ChangeLog
index f0e460445c3b856dd282e28f843aebd3fa231153..e6f8c6a03e07942ce77fb6f8074b26adfee47b4e 100644 (file)
--- a/hostapd/ChangeLog
+++ b/hostapd/ChangeLog
@@ -1,5 +1,49 @@
 ChangeLog for hostapd
 
+2015-03-15 - v2.4
+       * allow OpenSSL cipher configuration to be set for internal EAP server
+         (openssl_ciphers parameter)
+       * fixed number of small issues based on hwsim test case failures and
+         static analyzer reports
+       * fixed Accounting-Request to not include duplicated Acct-Session-Id
+       * add support for Acct-Multi-Session-Id in RADIUS Accounting messages
+       * add support for PMKSA caching with SAE
+       * add support for generating BSS Load element (bss_load_update_period)
+       * fixed channel switch from VHT to HT
+       * add INTERFACE-ENABLED and INTERFACE-DISABLED ctrl_iface events
+       * add support for learning STA IPv4/IPv6 addresses and configuring
+         ProxyARP support
+       * dropped support for the madwifi driver interface
+       * add support for Suite B (128-bit and 192-bit level) key management and
+         cipher suites
+       * fixed a regression with driver=wired
+       * extend EAPOL-Key msg 1/4 retry workaround for changing SNonce
+       * add BSS_TM_REQ ctrl_iface command to send BSS Transition Management
+         Request frames and BSS-TM-RESP event to indicate response to such
+         frame
+       * add support for EAP Re-Authentication Protocol (ERP)
+       * fixed AP IE in EAPOL-Key 3/4 when both WPA and FT was enabled
+       * fixed a regression in HT 20/40 coex Action frame parsing
+       * set stdout to be line-buffered
+       * add support for vendor specific VHT extension to enable 256 QAM rates
+         (VHT-MCS 8 and 9) on 2.4 GHz band
+       * RADIUS DAS:
+         - extend Disconnect-Request processing to allow matching of multiple
+           sessions
+         - support Acct-Multi-Session-Id as an identifier
+         - allow PMKSA cache entry to be removed without association
+       * expire hostapd STA entry if kernel does not have a matching entry
+       * allow chanlist to be used to specify a subset of channels for ACS
+       * improve ACS behavior on 2.4 GHz band and allow channel bias to be
+         configured with acs_chan_bias parameter
+       * do not reply to a Probe Request frame that includes DSS Parameter Set
+         element in which the channel does not match the current operating
+         channel
+       * add UPDATE_BEACON ctrl_iface command; this can be used to force Beacon
+         frame contents to be updated and to start beaconing on an interface
+         that used start_disabled=1
+       * fixed some RADIUS server failover cases
+
 2014-10-09 - v2.3
        * fixed number of minor issues identified in static analyzer warnings
        * fixed DFS and channel switch operation for multi-BSS cases

diff --git a/wpa_supplicant/ChangeLog b/wpa_supplicant/ChangeLog
index f09e7a0031cea86c24297c518f7d1f049d04f938..1ac79b4ae5f91c6dcf1b96b3259d4797e1dc2801 100644 (file)
--- a/wpa_supplicant/ChangeLog
+++ b/wpa_supplicant/ChangeLog
@@ -1,5 +1,83 @@
 ChangeLog for wpa_supplicant
 
+2015-03-15 - v2.4
+       * allow OpenSSL cipher configuration to be set for internal EAP server
+         (openssl_ciphers parameter)
+       * fixed number of small issues based on hwsim test case failures and
+         static analyzer reports
+       * P2P:
+         - add new=<0/1> flag to P2P-DEVICE-FOUND events
+         - add passive channels in invitation response from P2P Client
+         - enable nl80211 P2P_DEVICE support by default
+         - fix regresssion in disallow_freq preventing search on social
+           channels
+         - fix regressions in P2P SD query processing
+         - try to re-invite with social operating channel if no common channels
+           in invitation
+         - allow cross connection on parent interface (this fixes number of
+           use cases with nl80211)
+         - add support for P2P services (P2PS)
+         - add p2p_go_ctwindow configuration parameter to allow GO CTWindow to
+           be configured
+       * increase postponing of EAPOL-Start by one second with AP/GO that
+         supports WPS 2.0 (this makes it less likely to trigger extra roundtrip
+         of identity frames)
+       * add support for PMKSA caching with SAE
+       * add support for control mesh BSS (IEEE 802.11s) operations
+       * fixed number of issues with D-Bus P2P commands
+       * fixed regression in ap_scan=2 special case for WPS
+       * fixed macsec_validate configuration
+       * add a workaround for incorrectly behaving APs that try to use
+         EAPOL-Key descriptor version 3 when the station supports PMF even if
+         PMF is not enabled on the AP
+       * allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior
+         of disabling these can be configured to work around issues with broken
+         servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1"
+       * add support for Suite B (128-bit and 192-bit level) key management and
+         cipher suites
+       * add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS)
+       * improved BSS Transition Management processing
+       * add support for neighbor report
+       * add support for link measurement
+       * fixed expiration of BSS entry with all-zeros BSSID
+       * add optional LAST_ID=x argument to LIST_NETWORK to allow all
+         configured networks to be listed even with huge number of network
+         profiles
+       * add support for EAP Re-Authentication Protocol (ERP)
+       * fixed EAP-IKEv2 fragmentation reassembly
+       * improved PKCS#11 configuration for OpenSSL
+       * set stdout to be line-buffered
+       * add TDLS channel switch configuration
+       * add support for MAC address randomization in scans with nl80211
+       * enable HT for IBSS if supported by the driver
+       * add BSSID black and white lists (bssid_blacklist, bssid_whitelist)
+       * add support for domain_suffix_match with GnuTLS
+       * add OCSP stapling client support with GnuTLS
+       * include peer certificate in EAP events even without a separate probe
+         operation; old behavior can be restored with cert_in_cb=0
+       * add peer ceritficate alt subject name to EAP events
+         (CTRL-EVENT-EAP-PEER-ALT)
+       * add domain_match network profile parameter (similar to
+         domain_suffix_match, but full match is required)
+       * enable AP/GO mode HT Tx STBC automatically based on driver support
+       * add ANQP-QUERY-DONE event to provide information on ANQP parsing
+         status
+       * allow passive scanning to be forced with passive_scan=1
+       * add a workaround for Linux packet socket behavior when interface is in
+         bridge
+       * increase 5 GHz band preference in BSS selection (estimate SNR, if info
+         not available from driver; estimate maximum throughput based on common
+         HT/VHT/specific TX rate support)
+       * add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to
+         implement Interworking network selection behavior in upper layers
+         software components
+       * add optional reassoc_same_bss_optim=1 (disabled by default)
+         optimization to avoid unnecessary Authentication frame exchange
+       * extend TDLS frame padding workaround to cover all packets
+       * allow wpa_supplicant to recover nl80211 functionality if the cfg80211
+         module gets removed and reloaded without restarting wpa_supplicant
+       * allow hostapd DFS implementation to be used in wpa_supplicant AP mode
+
 2014-10-09 - v2.3
        * fixed number of minor issues identified in static analyzer warnings
        * fixed wfd_dev_info to be more careful and not read beyond the buffer