arm64: versal: Enable USB driver support

This patch adds usb host and device mode support for Xilinx
Versal virtual platform. By default USB host functionality
is enabled. To use in usb device mode, set dr_mode property
in DT to peripheral.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index b847bdd46e30680ae8602f422b34fd2c6e292b6b..c677d833b0dff02264f1eaddcd27193bf2cc456f 100644 (file)
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -19,12 +19,14 @@ CONFIG_SYS_PROMPT="Versal> "
 CONFIG_CMD_BOOTMENU=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DFU=y
 CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_MII=y
@@ -44,9 +46,11 @@ CONFIG_EFI_PARTITION=y
 CONFIG_OF_BOARD=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DFU_RAM=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
+CONFIG_MISC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_DM_SPI_FLASH=y
@@ -78,5 +82,22 @@ CONFIG_CADENCE_QSPI=y
 CONFIG_CADENCE_OSPI_VERSAL=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
+CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_THOR=y
 CONFIG_FAT_WRITE=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y