char filenameprefix[] = "lldp_send";
-START_TEST (test_send_basic)
+static void
+check_received_port(
+ struct lldpd_port *sport,
+ struct lldpd_port *rport)
{
- int n;
- /* Packet we should build:
-Ethernet II, Src: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad), Dst: LLDP_Multicast (01:80:c2:00:00:0e)
- Destination: LLDP_Multicast (01:80:c2:00:00:0e)
- Source: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Type: 802.1 Link Layer Discovery Protocol (LLDP) (0x88cc)
-Link Layer Discovery Protocol
- Chassis Subtype = MAC address
- 0000 001. .... .... = TLV Type: Chassis Id (1)
- .... ...0 0000 0111 = TLV Length: 7
- Chassis Id Subtype: MAC address (4)
- Chassis Id: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Port Subtype = Interface name
- 0000 010. .... .... = TLV Type: Port Id (2)
- .... ...0 0001 0001 = TLV Length: 17
- Port Id Subtype: Interface name (5)
- Port Id: FastEthernet 1/5
- Time To Live = 180 sec
- 0000 011. .... .... = TLV Type: Time to Live (3)
- .... ...0 0000 0010 = TLV Length: 2
- Seconds: 180
- System Name = First chassis
- 0000 101. .... .... = TLV Type: System Name (5)
- .... ...0 0000 1101 = TLV Length: 13
- System Name = First chassis
- System Description = Chassis description
- 0000 110. .... .... = TLV Type: System Description (6)
- .... ...0 0001 0011 = TLV Length: 19
- System Description = Chassis description
- Capabilities
- 0000 111. .... .... = TLV Type: System Capabilities (7)
- .... ...0 0000 0100 = TLV Length: 4
- Capabilities: 0x0010
- .... .... ...1 .... = Router
- Enabled Capabilities: 0x0010
- .... .... ...1 .... = Router
- Port Description = Fake port description
- 0000 100. .... .... = TLV Type: Port Description (4)
- .... ...0 0001 0101 = TLV Length: 21
- Port Description: Fake port description
- IEEE 802.3 - Link Aggregation
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Link Aggregation (0x03)
- Aggregation Status: 0x01
- .... ...1 = Aggregation Capability: Yes
- .... ..0. = Aggregation Status: Not Enabled
- Aggregated Port Id: 0
- IEEE 802.3 - MAC/PHY Configuration/Status
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: MAC/PHY Configuration/Status (0x01)
- Auto-Negotiation Support/Status: 0x00
- .... ...0 = Auto-Negotiation: Not Supported
- .... ..0. = Auto-Negotiation: Not Enabled
- PMD Auto-Negotiation Advertised Capability: 0x0000
- Operational MAU Type: Unknown (0x0000)
- IEEE 802.3 - Maximum Frame Size
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0110 = TLV Length: 6
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Maximum Frame Size (0x04)
- Maximum Frame Size: 1516
- End of LLDPDU
- 0000 000. .... .... = TLV Type: End of LLDPDU (0)
- .... ...0 0000 0000 = TLV Length: 0
- */
- char pkt1[] = {
- 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e, 0x5e, 0x10,
- 0x8e, 0xe7, 0x84, 0xad, 0x88, 0xcc, 0x02, 0x07,
- 0x04, 0x5e, 0x10, 0x8e, 0xe7, 0x84, 0xad, 0x04,
- 0x11, 0x05, 0x46, 0x61, 0x73, 0x74, 0x45, 0x74,
- 0x68, 0x65, 0x72, 0x6e, 0x65, 0x74, 0x20, 0x31,
- 0x2f, 0x35, 0x06, 0x02, 0x00, 0xb4, 0x0a, 0x0d,
- 0x46, 0x69, 0x72, 0x73, 0x74, 0x20, 0x63, 0x68,
- 0x61, 0x73, 0x73, 0x69, 0x73, 0x0c, 0x13, 0x43,
- 0x68, 0x61, 0x73, 0x73, 0x69, 0x73, 0x20, 0x64,
- 0x65, 0x73, 0x63, 0x72, 0x69, 0x70, 0x74, 0x69,
- 0x6f, 0x6e, 0x0e, 0x04, 0x00, 0x10, 0x00, 0x10,
- 0x08, 0x15, 0x46, 0x61, 0x6b, 0x65, 0x20, 0x70,
- 0x6f, 0x72, 0x74, 0x20, 0x64, 0x65, 0x73, 0x63,
- 0x72, 0x69, 0x70, 0x74, 0x69, 0x6f, 0x6e,
+ ck_assert_int_eq(rport->p_id_subtype, sport->p_id_subtype);
+ ck_assert_str_eq(rport->p_id, sport->p_id);
+ ck_assert_int_eq(rport->p_id_len, sport->p_id_len);
+ ck_assert_str_eq(rport->p_descr, sport->p_descr);
+ ck_assert_int_eq(rport->p_mfs, sport->p_mfs);
+ return;
+}
+
+static void
+check_received_chassis(
+ struct lldpd_chassis *schassis,
+ struct lldpd_chassis *rchassis)
+{
+ ck_assert_int_eq(rchassis->c_id_subtype, schassis->c_id_subtype);
+ ck_assert_str_eq(rchassis->c_id, schassis->c_id);
+ ck_assert_int_eq(rchassis->c_id_len, schassis->c_id_len);
+ ck_assert_str_eq(rchassis->c_name, schassis->c_name);
+ ck_assert_str_eq(rchassis->c_descr, schassis->c_descr);
+ ck_assert_int_eq(rchassis->c_cap_available, schassis->c_cap_available);
+ ck_assert_int_eq(rchassis->c_cap_enabled, schassis->c_cap_enabled);
+ return;
+}
+
+#ifdef ENABLE_LLDPMED
+static void
+check_received_port_med(
+ struct lldpd_port *sport,
+ struct lldpd_port *rport)
+{
+ ck_assert_int_eq(rport->p_med_cap_enabled, sport->p_med_cap_enabled);
+ ck_assert_int_eq(rport->p_med_cap_enabled, sport->p_med_cap_enabled);
+ ck_assert_int_eq(
+ rport->p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].format,
+ sport->p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].format);
+ ck_assert_int_eq(
+ rport->p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data_len,
+ sport->p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data_len);
+ ck_assert_str_eq(
+ rport->p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data,
+ sport->p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data);
+ ck_assert_int_eq(
+ rport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].type,
+ sport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].type);
+ ck_assert_int_eq(
+ rport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].tagged,
+ sport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].tagged);
+ ck_assert_int_eq(
+ rport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].vid,
+ sport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].vid);
+ ck_assert_int_eq(
+ rport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].priority,
+ sport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].priority);
+ ck_assert_int_eq(
+ rport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].dscp,
+ sport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].dscp);
+ ck_assert_int_eq(
+ rport->p_med_power.devicetype, sport->p_med_power.devicetype);
+ ck_assert_int_eq(rport->p_med_power.source, sport->p_med_power.source);
+ ck_assert_int_eq(rport->p_med_power.priority,
+ sport->p_med_power.priority);
+ ck_assert_int_eq(rport->p_med_power.val, sport->p_med_power.val);
+ return;
+}
+
+static void
+check_received_chassis_med(
+ struct lldpd_chassis *schassis,
+ struct lldpd_chassis *rchassis)
+{
+ ck_assert_int_eq(rchassis->c_med_cap_available,
+ schassis->c_med_cap_available);
+ ck_assert_int_eq(rchassis->c_med_type, schassis->c_med_type);
+ ck_assert_str_eq(rchassis->c_med_hw, schassis->c_med_hw);
+ ck_assert_str_eq(rchassis->c_med_fw, schassis->c_med_fw);
+ ck_assert_str_eq(rchassis->c_med_sw, schassis->c_med_sw);
+ ck_assert_str_eq(rchassis->c_med_sn, schassis->c_med_sn);
+ return;
+}
+#endif
+
#ifdef ENABLE_DOT3
- 0xfe, 0x09,
- 0x00, 0x12, 0x0f, 0x03, 0x01, 0x00, 0x00,
- 0x00, 0x00, 0xfe, 0x09, 0x00, 0x12, 0x0f, 0x01,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0x00,
- 0x12, 0x0f, 0x04, 0x05, 0xec,
+static void
+check_received_port_dot3(
+ struct lldpd_port *sport,
+ struct lldpd_port *rport)
+{
+ ck_assert_int_eq(rport->p_aggregid, sport->p_aggregid);
+ ck_assert_int_eq(rport->p_macphy.autoneg_support,
+ sport->p_macphy.autoneg_support);
+ ck_assert_int_eq(rport->p_macphy.autoneg_enabled,
+ sport->p_macphy.autoneg_enabled);
+ ck_assert_int_eq(rport->p_macphy.autoneg_advertised,
+ sport->p_macphy.autoneg_advertised);
+ ck_assert_int_eq(rport->p_macphy.mau_type, sport->p_macphy.mau_type);
+ return;
+}
#endif
- 0x00, 0x00 };
+
+START_TEST (test_send_rcv_basic)
+{
+ int n;
struct packet *pkt;
+ struct lldpd_chassis *nchassis = NULL;
+ struct lldpd_port *nport = NULL;
/* Populate port and chassis */
hardware.h_lport.p_id_subtype = LLDP_PORTID_SUBTYPE_IFNAME;
return;
}
pkt = TAILQ_FIRST(&pkts);
- ck_assert_int_eq(pkt->size, sizeof(pkt1));
- fail_unless(memcmp(pkt->data, pkt1, sizeof(pkt1)) == 0);
fail_unless(TAILQ_NEXT(pkt, next) == NULL, "more than one packet sent");
+
+ /* decode the retrieved packet calling lldp_decode() */
+ fail_unless(lldp_decode(NULL, pkt->data, pkt->size, &hardware,
+ &nchassis, &nport) != -1);
+ if (!nchassis || !nport) {
+ fail("unable to decode packet");
+ return;
+ }
+ /* verify port values */
+ check_received_port(&hardware.h_lport, nport);
+ /* verify chassis values */
+ check_received_chassis(&chassis, nchassis);
}
END_TEST
#ifdef ENABLE_DOT1
-START_TEST (test_send_vlan)
+/* This test case tests send and receive of all DOT1 TLVs(2005 and 2009):
+ Port Valn ID, VLAN, Port Protocol VLAN ID, Protocol Identity,
+ VID Usage Digest, Management VID, and 802.1ax Link Aggregation TLVs */
+START_TEST (test_send_rcv_dot1_tlvs)
{
int n;
- struct lldpd_vlan vlan1, vlan2, vlan3;
- /* Packet we should build:
-Ethernet II, Src: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad), Dst: LLDP_Multicast (01:80:c2:00:00:0e)
- Destination: LLDP_Multicast (01:80:c2:00:00:0e)
- Address: LLDP_Multicast (01:80:c2:00:00:0e)
- Source: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Address: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
-he factory default)
- Type: 802.1 Link Layer Discovery Protocol (LLDP) (0x88cc)
-Link Layer Discovery Protocol
- Chassis Subtype = Locally assigned
- 0000 001. .... .... = TLV Type: Chassis Id (1)
- .... ...0 0000 1101 = TLV Length: 13
- Chassis Id Subtype: Locally assigned (7)
- Chassis Id: Chassis name
- Port Subtype = MAC address
- 0000 010. .... .... = TLV Type: Port Id (2)
- .... ...0 0000 0111 = TLV Length: 7
- Port Id Subtype: MAC address (3)
- Port Id: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Time To Live = 180 sec
- 0000 011. .... .... = TLV Type: Time to Live (3)
- .... ...0 0000 0010 = TLV Length: 2
- Seconds: 180
- System Name = Second chassis
- 0000 101. .... .... = TLV Type: System Name (5)
- .... ...0 0000 1110 = TLV Length: 14
- System Name = Second chassis
- System Description = Chassis description
- 0000 110. .... .... = TLV Type: System Description (6)
- .... ...0 0001 0011 = TLV Length: 19
- System Description = Chassis description
- Capabilities
- 0000 111. .... .... = TLV Type: System Capabilities (7)
- .... ...0 0000 0100 = TLV Length: 4
- Capabilities: 0x0014
- .... .... .... .1.. = Bridge
- .... .... ...1 .... = Router
- Enabled Capabilities: 0x0010
- .... .... ...1 .... = Router
- Port Description = Fake port description
- 0000 100. .... .... = TLV Type: Port Description (4)
- .... ...0 0001 0101 = TLV Length: 21
- Port Description: Fake port description
- IEEE 802.1 - VLAN Name
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0001 0001 = TLV Length: 17
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: VLAN Name (0x03)
- VLAN Identifier: 157 (0x009D)
- VLAN Name Length: 10
- VLAN Name: First VLAN
- IEEE 802.1 - VLAN Name
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0001 0010 = TLV Length: 18
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: VLAN Name (0x03)
- VLAN Identifier: 1247 (0x04DF)
- VLAN Name Length: 11
- VLAN Name: Second VLAN
- IEEE 802.1 - VLAN Name
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0001 0001 = TLV Length: 17
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: VLAN Name (0x03)
- VLAN Identifier: 741 (0x02E5)
- VLAN Name Length: 10
- VLAN Name: Third VLAN
- IEEE 802.3 - Link Aggregation
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Link Aggregation (0x03)
- Aggregation Status: 0x01
- .... ...1 = Aggregation Capability: Yes
- .... ..0. = Aggregation Status: Not Enabled
- Aggregated Port Id: 0
- IEEE 802.3 - MAC/PHY Configuration/Status
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: MAC/PHY Configuration/Status (0x01)
- Auto-Negotiation Support/Status: 0x00
- .... ...0 = Auto-Negotiation: Not Supported
- .... ..0. = Auto-Negotiation: Not Enabled
- PMD Auto-Negotiation Advertised Capability: 0x0000
- Operational MAU Type: Unknown (0x0000)
- IEEE 802.3 - Maximum Frame Size
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0110 = TLV Length: 6
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Maximum Frame Size (0x04)
- Maximum Frame Size: 1516
- End of LLDPDU
- 0000 000. .... .... = TLV Type: End of LLDPDU (0)
- .... ...0 0000 0000 = TLV Length: 0
- */
- char pkt1[] = {
- 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e, 0x5e, 0x10,
- 0x8e, 0xe7, 0x84, 0xad, 0x88, 0xcc, 0x02, 0x0d,
- 0x07, 0x43, 0x68, 0x61, 0x73, 0x73, 0x69, 0x73,
- 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x04, 0x07, 0x03,
- 0x5e, 0x10, 0x8e, 0xe7, 0x84, 0xad, 0x06, 0x02,
- 0x00, 0xb4, 0x0a, 0x0e, 0x53, 0x65, 0x63, 0x6f,
- 0x6e, 0x64, 0x20, 0x63, 0x68, 0x61, 0x73, 0x73,
- 0x69, 0x73, 0x0c, 0x13, 0x43, 0x68, 0x61, 0x73,
- 0x73, 0x69, 0x73, 0x20, 0x64, 0x65, 0x73, 0x63,
- 0x72, 0x69, 0x70, 0x74, 0x69, 0x6f, 0x6e, 0x0e,
- 0x04, 0x00, 0x14, 0x00, 0x10, 0x08, 0x15, 0x46,
- 0x61, 0x6b, 0x65, 0x20, 0x70, 0x6f, 0x72, 0x74,
- 0x20, 0x64, 0x65, 0x73, 0x63, 0x72, 0x69, 0x70,
- 0x74, 0x69, 0x6f, 0x6e, 0xfe, 0x11, 0x00, 0x80,
- 0xc2, 0x03, 0x00, 0x9d, 0x0a, 0x46, 0x69, 0x72,
- 0x73, 0x74, 0x20, 0x56, 0x4c, 0x41, 0x4e, 0xfe,
- 0x12, 0x00, 0x80, 0xc2, 0x03, 0x04, 0xdf, 0x0b,
- 0x53, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x20, 0x56,
- 0x4c, 0x41, 0x4e, 0xfe, 0x11, 0x00, 0x80, 0xc2,
- 0x03, 0x02, 0xe5, 0x0a, 0x54, 0x68, 0x69, 0x72,
- 0x64, 0x20, 0x56, 0x4c, 0x41, 0x4e,
-#ifdef ENABLE_DOT3
- 0xfe, 0x09,
- 0x00, 0x12, 0x0f, 0x03, 0x01, 0x00, 0x00, 0x00,
- 0x00, 0xfe, 0x09, 0x00, 0x12, 0x0f, 0x01, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0x00, 0x12,
- 0x0f, 0x04, 0x05, 0xec,
-#endif
- 0x00, 0x00 };
+ struct lldpd_vlan *rvlan, vlan1, vlan2, vlan3;
+ struct lldpd_ppvid ppvid, *rppvid;
+ struct lldpd_pi pi1, pi2, *rpi;
+ struct lldpd_chassis *nchassis = NULL;
+ struct lldpd_port *nport = NULL;
struct packet *pkt;
/* Populate port and chassis */
hardware.h_lport.p_id_len = ETH_ALEN;
hardware.h_lport.p_descr = "Fake port description";
hardware.h_lport.p_mfs = 1516;
+ hardware.h_lport.p_pvid = 1500;
chassis.c_id_subtype = LLDP_CHASSISID_SUBTYPE_LOCAL;
chassis.c_id = "Chassis name";
chassis.c_id_len = strlen(chassis.c_id);
chassis.c_descr = "Chassis description";
chassis.c_cap_available = LLDP_CAP_ROUTER | LLDP_CAP_BRIDGE;
chassis.c_cap_enabled = LLDP_CAP_ROUTER;
- vlan1.v_name = "First VLAN"; vlan1.v_vid = 157;
- vlan2.v_name = "Second VLAN"; vlan2.v_vid = 1247;
- vlan3.v_name = "Third VLAN"; vlan3.v_vid = 741;
+ vlan1.v_name = "Voice"; vlan1.v_vid = 157;
+ vlan2.v_name = "Data"; vlan2.v_vid = 1247;
+ vlan3.v_name = "Control"; vlan3.v_vid = 741;
TAILQ_INSERT_TAIL(&hardware.h_lport.p_vlans, &vlan1, v_entries);
TAILQ_INSERT_TAIL(&hardware.h_lport.p_vlans, &vlan2, v_entries);
TAILQ_INSERT_TAIL(&hardware.h_lport.p_vlans, &vlan3, v_entries);
+ ppvid.p_cap_status = 3;
+ ppvid.p_ppvid = 1500;
+ TAILQ_INSERT_TAIL(&hardware.h_lport.p_ppvids, &ppvid, p_entries);
+ pi1.p_pi = "IEEE Link Aggregration Control Protocol 802.3ad";
+ pi2.p_pi = "IEEE Link Layer Discovery Protocol 802.1ab-2005";
+ TAILQ_INSERT_TAIL(&hardware.h_lport.p_pids, &pi1, p_entries);
+ TAILQ_INSERT_TAIL(&hardware.h_lport.p_pids, &pi2, p_entries);
/* Build packet */
n = lldp_send(NULL, &hardware);
return;
}
pkt = TAILQ_FIRST(&pkts);
- ck_assert_int_eq(pkt->size, sizeof(pkt1));
- fail_unless(memcmp(pkt->data, pkt1, sizeof(pkt1)) == 0);
fail_unless(TAILQ_NEXT(pkt, next) == NULL, "more than one packet sent");
+
+ /* decode the retrieved packet calling lldp_decode() */
+ fail_unless(lldp_decode(NULL, pkt->data, pkt->size, &hardware,
+ &nchassis, &nport) != -1);
+ if (!nchassis || !nport) {
+ fail("unable to decode packet");
+ return;
+ }
+
+ /* verify port values */
+ check_received_port(&hardware.h_lport, nport);
+ /* verify chassis values */
+ check_received_chassis(&chassis, nchassis);
+
+ if (TAILQ_EMPTY(&nport->p_vlans)) {
+ fail("no VLAN");
+ return;
+ }
+
+ rvlan = TAILQ_FIRST(&nport->p_vlans);
+ ck_assert_int_eq(rvlan->v_vid, vlan1.v_vid);
+ ck_assert_str_eq(rvlan->v_name, vlan1.v_name);
+
+ rvlan = TAILQ_NEXT(rvlan, v_entries);
+ if (!rvlan) {
+ fail("no more VLAN");
+ return;
+ }
+ ck_assert_int_eq(rvlan->v_vid, vlan2.v_vid);
+ ck_assert_str_eq(rvlan->v_name, vlan2.v_name);
+
+ rvlan = TAILQ_NEXT(rvlan, v_entries);
+ if (!rvlan) {
+ fail("no more VLAN");
+ return;
+ }
+ ck_assert_int_eq(rvlan->v_vid, vlan3.v_vid);
+ ck_assert_str_eq(rvlan->v_name, vlan3.v_name);
+
+ rvlan = TAILQ_NEXT(rvlan, v_entries);
+ fail_unless(rvlan == NULL);
+
+ ck_assert_int_eq(nport->p_pvid, hardware.h_lport.p_pvid);
+
+ if (TAILQ_EMPTY(&nport->p_ppvids)) {
+ fail("no Port Protocal VLAN ID");
+ return;
+ }
+ rppvid = TAILQ_FIRST(&nport->p_ppvids);
+ ck_assert_int_eq(rppvid->p_cap_status, ppvid.p_cap_status);
+ ck_assert_int_eq(rppvid->p_ppvid, ppvid.p_ppvid);
+
+ if (TAILQ_EMPTY(&nport->p_pids)) {
+ fail("no Protocal Identity TLV");
+ return;
+ }
+ rpi = TAILQ_FIRST(&nport->p_pids);
+ ck_assert_str_eq(rpi->p_pi, pi1.p_pi);
+
+ rpi = TAILQ_NEXT(rpi, p_entries);
+ if (!rpi) {
+ fail("no more Protocol Identity TLVs");
+ return;
+ }
+ ck_assert_str_eq(rpi->p_pi, pi2.p_pi);
+
+ rpi = TAILQ_NEXT(rpi, p_entries);
+ fail_unless(rpi == NULL);
+
+ return;
}
END_TEST
#endif
#ifdef ENABLE_LLDPMED
-START_TEST (test_send_med)
+START_TEST (test_send_rcv_med)
{
int n;
- char loc[] = {0x28, 0x02, 0x55, 0x53, 0x01, 0x02, 0x43, 0x41, 0x03,
- 0x09, 0x52, 0x6f, 0x73, 0x65, 0x76, 0x69, 0x6c,
- 0x6c, 0x65, 0x06, 0x09, 0x46, 0x6f, 0x6f, 0x74,
- 0x68, 0x69, 0x6c, 0x6c, 0x73, 0x13, 0x04, 0x38,
- 0x30, 0x30, 0x30, 0x1a, 0x03, 0x52, 0x33, 0x4c};
-
- /* Packet we should build:
-Ethernet II, Src: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad), Dst: LLDP_Multicast (01:80:c2:00:00:0e)
- Destination: LLDP_Multicast (01:80:c2:00:00:0e)
- Address: LLDP_Multicast (01:80:c2:00:00:0e)
- .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
- .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
- Source: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Address: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- .... ...0 .... .... .... .... = IG bit: Individual address (unicast)
- .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
- Type: 802.1 Link Layer Discovery Protocol (LLDP) (0x88cc)
-Link Layer Discovery Protocol
- Chassis Subtype = Locally assigned, Id: Chassis name
- 0000 001. .... .... = TLV Type: Chassis Id (1)
- .... ...0 0000 1101 = TLV Length: 13
- Chassis Id Subtype: Locally assigned (7)
- Chassis Id: Chassis name
- Port Subtype = MAC address
- 0000 010. .... .... = TLV Type: Port Id (2)
- .... ...0 0000 0111 = TLV Length: 7
- Port Id Subtype: MAC address (3)
- Port Id: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Time To Live = 180 sec
- 0000 011. .... .... = TLV Type: Time to Live (3)
- .... ...0 0000 0010 = TLV Length: 2
- Seconds: 180
- System Name = Third chassis
- 0000 101. .... .... = TLV Type: System Name (5)
- .... ...0 0000 1101 = TLV Length: 13
- System Name = Third chassis
- System Description = Chassis description
- 0000 110. .... .... = TLV Type: System Description (6)
- .... ...0 0001 0011 = TLV Length: 19
- System Description = Chassis description
- Capabilities
- 0000 111. .... .... = TLV Type: System Capabilities (7)
- .... ...0 0000 0100 = TLV Length: 4
- Capabilities: 0x0014
- .... .... .... .1.. = Bridge
- .... .... ...1 .... = Router
- Enabled Capabilities: 0x0010
- .... .... ...1 .... = Router
- Port Description = Fake port description
- 0000 100. .... .... = TLV Type: Port Description (4)
- .... ...0 0001 0101 = TLV Length: 21
- Port Description: Fake port description
- IEEE 802.3 - Link Aggregation
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Link Aggregation (0x03)
- Aggregation Status: 0x01
- .... ...1 = Aggregation Capability: Yes
- .... ..0. = Aggregation Status: Not Enabled
- Aggregated Port Id: 0
- IEEE 802.3 - MAC/PHY Configuration/Status
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: MAC/PHY Configuration/Status (0x01)
- Auto-Negotiation Support/Status: 0x00
- .... ...0 = Auto-Negotiation: Not Supported
- .... ..0. = Auto-Negotiation: Not Enabled
- PMD Auto-Negotiation Advertised Capability: 0x0000
- Operational MAU Type: Unknown (0x0000)
- IEEE 802.3 - Maximum Frame Size
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0110 = TLV Length: 6
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Maximum Frame Size (0x04)
- Maximum Frame Size: 1516
- TIA - Media Capabilities
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0111 = TLV Length: 7
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Media Capabilities (0x01)
- Capabilities: 0x002f
- .... .... .... ...1 = LLDP-MED Capabilities
- .... .... .... ..1. = Network Policy
- .... .... .... .1.. = Location Identification
- .... .... .... 1... = Extended Power via MDI-PSE
- .... .... ..1. .... = Inventory
- Class Type: Endpoint Class III
- TIA - Inventory - Hardware Revision
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0001 0010 = TLV Length: 18
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Inventory - Hardware Revision (0x05)
- Hardware Revision: hardware rev 5
- TIA - Inventory - Firmware Revision
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1000 = TLV Length: 8
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Inventory - Firmware Revision (0x06)
- Firmware Revision: 47b5
- TIA - Inventory - Software Revision
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1100 = TLV Length: 12
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Inventory - Software Revision (0x07)
- Software Revision: 2.6.22b5
- TIA - Inventory - Serial Number
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1100 = TLV Length: 12
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Inventory - Serial Number (0x08)
- Serial Number: SN 47842
- TIA - Location Identification
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0010 1110 = TLV Length: 46
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Location Identification (0x03)
- Location Data Format: Civic Address LCI (2)
- LCI Length: 40
- What: Location of the client (2)
- Country: US
- CA Type: National subdivisions (province, state, etc) (1)
- CA Length: 2
- CA Value: CA
- CA Type: City, township (3)
- CA Length: 9
- CA Value: Roseville
- CA Type: Street (6)
- CA Length: 9
- CA Value: Foothills
- CA Type: House number (19)
- CA Length: 4
- CA Value: 8000
- CA Type: Unit (26)
- CA Length: 3
- CA Value: R3L
- TIA - Network Policy
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1000 = TLV Length: 8
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Network Policy (0x02)
- Application Type: Softphone Voice (5)
- 0... .... .... .... = Policy: Defined
- .1.. .... .... .... = Tagged: Yes
- ...0 0000 0110 011. = VLAN Id: 51
- .... ...1 10.. .... = L2 Priority: 6
- ..10 1110 = DSCP Value: 46
- TIA - Extended Power-via-MDI
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0111 = TLV Length: 7
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Extended Power-via-MDI (0x04)
- 00.. .... = Power Type: PSE Device
- ..01 .... = Power Source: Primary Power Source
- .... 0010 = Power Priority: High
- Power Value: 65
- End of LLDPDU
- 0000 000. .... .... = TLV Type: End of LLDPDU (0)
- .... ...0 0000 0000 = TLV Length: 0
- */
- char pkt1[] = {
- 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e, 0x5e, 0x10,
- 0x8e, 0xe7, 0x84, 0xad, 0x88, 0xcc, 0x02, 0x0d,
- 0x07, 0x43, 0x68, 0x61, 0x73, 0x73, 0x69, 0x73,
- 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x04, 0x07, 0x03,
- 0x5e, 0x10, 0x8e, 0xe7, 0x84, 0xad, 0x06, 0x02,
- 0x00, 0xb4, 0x0a, 0x0d, 0x54, 0x68, 0x69, 0x72,
- 0x64, 0x20, 0x63, 0x68, 0x61, 0x73, 0x73, 0x69,
- 0x73, 0x0c, 0x13, 0x43, 0x68, 0x61, 0x73, 0x73,
- 0x69, 0x73, 0x20, 0x64, 0x65, 0x73, 0x63, 0x72,
- 0x69, 0x70, 0x74, 0x69, 0x6f, 0x6e, 0x0e, 0x04,
- 0x00, 0x14, 0x00, 0x10, 0x08, 0x15, 0x46, 0x61,
- 0x6b, 0x65, 0x20, 0x70, 0x6f, 0x72, 0x74, 0x20,
- 0x64, 0x65, 0x73, 0x63, 0x72, 0x69, 0x70, 0x74,
- 0x69, 0x6f, 0x6e,
-#ifdef ENABLE_DOT3
- 0xfe, 0x09, 0x00, 0x12, 0x0f,
- 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x09,
- 0x00, 0x12, 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0xfe, 0x06, 0x00, 0x12, 0x0f, 0x04, 0x05,
- 0xec,
-#endif
- 0xfe, 0x07, 0x00, 0x12, 0xbb, 0x01, 0x00,
- 0x2f, 0x03, 0xfe, 0x12, 0x00, 0x12, 0xbb, 0x05,
- 0x68, 0x61, 0x72, 0x64, 0x77, 0x61, 0x72, 0x65,
- 0x20, 0x72, 0x65, 0x76, 0x20, 0x35, 0xfe, 0x08,
- 0x00, 0x12, 0xbb, 0x06, 0x34, 0x37, 0x62, 0x35,
- 0xfe, 0x0c, 0x00, 0x12, 0xbb, 0x07, 0x32, 0x2e,
- 0x36, 0x2e, 0x32, 0x32, 0x62, 0x35, 0xfe, 0x0c,
- 0x00, 0x12, 0xbb, 0x08, 0x53, 0x4e, 0x20, 0x34,
- 0x37, 0x38, 0x34, 0x32, 0xfe, 0x2e, 0x00, 0x12,
- 0xbb, 0x03, 0x02, 0x28, 0x02, 0x55, 0x53, 0x01,
- 0x02, 0x43, 0x41, 0x03, 0x09, 0x52, 0x6f, 0x73,
- 0x65, 0x76, 0x69, 0x6c, 0x6c, 0x65, 0x06, 0x09,
- 0x46, 0x6f, 0x6f, 0x74, 0x68, 0x69, 0x6c, 0x6c,
- 0x73, 0x13, 0x04, 0x38, 0x30, 0x30, 0x30, 0x1a,
- 0x03, 0x52, 0x33, 0x4c, 0xfe, 0x08, 0x00, 0x12,
- 0xbb, 0x02, 0x05, 0x40, 0x67, 0xae, 0xfe, 0x07,
- 0x00, 0x12, 0xbb, 0x04, 0x12, 0x00, 0x41,
- 0x00, 0x00 };
-
struct packet *pkt;
+ struct lldpd_chassis *nchassis = NULL;
+ struct lldpd_port *nport = NULL;
/* Populate port and chassis */
hardware.h_lport.p_id_subtype = LLDP_PORTID_SUBTYPE_LLADDR;
hardware.h_lport.p_med_cap_enabled = chassis.c_med_cap_available;
hardware.h_lport.p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].format =
LLDPMED_LOCFORMAT_CIVIC;
- hardware.h_lport.p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data_len =
- loc[0] + 1; /* +1 is because of the size */
- hardware.h_lport.p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data = loc;
+ hardware.h_lport.p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data = "Your favorite city";
+ hardware.h_lport.p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].data_len =
+ sizeof("Your favorite city");
hardware.h_lport.p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].type =
LLDPMED_APPTYPE_SOFTPHONEVOICE;
hardware.h_lport.p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].tagged =
return;
}
pkt = TAILQ_FIRST(&pkts);
- ck_assert_int_eq(pkt->size, sizeof(pkt1));
- fail_unless(memcmp(pkt->data, pkt1, sizeof(pkt1)) == 0);
fail_unless(TAILQ_NEXT(pkt, next) == NULL, "more than one packet sent");
+
+ /* decode the retrieved packet calling lldp_decode() */
+ fail_unless(lldp_decode(NULL, pkt->data, pkt->size, &hardware,
+ &nchassis, &nport) != -1);
+ if (!nchassis || !nport) {
+ fail("unable to decode packet");
+ return;
+ }
+ /* verify port values */
+ check_received_port(&hardware.h_lport, nport);
+ /* verify chassis values */
+ check_received_chassis(&chassis, nchassis);
+
+ /* veridfy med content */
+ check_received_port_med(&hardware.h_lport, nport);
+ check_received_chassis_med(&chassis, nchassis);
}
END_TEST
#endif
#ifdef ENABLE_DOT3
-START_TEST (test_send_dot3)
+START_TEST (test_send_rcv_dot3)
{
int n;
- /* Packet we should build:
-Ethernet II, Src: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad), Dst: LLDP_Multicast (01:80:c2:00:00:0e)
- Destination: LLDP_Multicast (01:80:c2:00:00:0e)
- Address: LLDP_Multicast (01:80:c2:00:00:0e)
- Source: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Address: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
-he factory default)
- Type: 802.1 Link Layer Discovery Protocol (LLDP) (0x88cc)
-Link Layer Discovery Protocol
- Chassis Subtype = MAC address
- 0000 001. .... .... = TLV Type: Chassis Id (1)
- .... ...0 0000 0111 = TLV Length: 7
- Chassis Id Subtype: MAC address (4)
- Chassis Id: 5e:10:8e:e7:84:ad (5e:10:8e:e7:84:ad)
- Port Subtype = Interface name
- 0000 010. .... .... = TLV Type: Port Id (2)
- .... ...0 0001 0001 = TLV Length: 17
- Port Id Subtype: Interface name (5)
- Port Id: FastEthernet 1/5
- Time To Live = 180 sec
- 0000 011. .... .... = TLV Type: Time to Live (3)
- .... ...0 0000 0010 = TLV Length: 2
- Seconds: 180
- System Name = Fourth chassis
- 0000 101. .... .... = TLV Type: System Name (5)
- .... ...0 0000 1110 = TLV Length: 14
- System Name = Fourth chassis
- System Description = Long chassis description
- 0000 110. .... .... = TLV Type: System Description (6)
- .... ...0 0001 1000 = TLV Length: 24
- System Description = Long chassis description
- Capabilities
- 0000 111. .... .... = TLV Type: System Capabilities (7)
- .... ...0 0000 0100 = TLV Length: 4
- Capabilities: 0x0018
- .... .... .... 1... = WLAN access point
- .... .... ...1 .... = Router
- Enabled Capabilities: 0x0018
- .... .... .... 1... = WLAN access point
- .... .... ...1 .... = Router
- Port Description = Fake port description
- 0000 100. .... .... = TLV Type: Port Description (4)
- .... ...0 0001 0101 = TLV Length: 21
- Port Description: Fake port description
- IEEE 802.3 - Link Aggregation
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Link Aggregation (0x03)
- Aggregation Status: 0x03
- .... ...1 = Aggregation Capability: Yes
- .... ..1. = Aggregation Status: Enabled
- Aggregated Port Id: 5
- IEEE 802.3 - MAC/PHY Configuration/Status
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: MAC/PHY Configuration/Status (0x01)
- Auto-Negotiation Support/Status: 0x03
- .... ...1 = Auto-Negotiation: Supported
- .... ..1. = Auto-Negotiation: Enabled
- PMD Auto-Negotiation Advertised Capability: 0x6C00
- .... .1.. .... .... = 100BASE-TX (full duplex mode)
- .... 1... .... .... = 100BASE-TX (half duplex mode)
- ..1. .... .... .... = 10BASE-T (full duplex mode)
- .1.. .... .... .... = 10BASE-T (half duplex mode)
- Operational MAU Type: 100BaseTXFD - 2 pair category 5 UTP, full duplex mode (0x0010)
- IEEE 802.3 - Maximum Frame Size
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0110 = TLV Length: 6
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: Maximum Frame Size (0x04)
- Maximum Frame Size: 1516
- End of LLDPDU
- 0000 000. .... .... = TLV Type: End of LLDPDU (0)
- .... ...0 0000 0000 = TLV Length: 0
- */
- char pkt1[] = {
- 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e, 0x5e, 0x10,
- 0x8e, 0xe7, 0x84, 0xad, 0x88, 0xcc, 0x02, 0x07,
- 0x04, 0x5e, 0x10, 0x8e, 0xe7, 0x84, 0xad, 0x04,
- 0x11, 0x05, 0x46, 0x61, 0x73, 0x74, 0x45, 0x74,
- 0x68, 0x65, 0x72, 0x6e, 0x65, 0x74, 0x20, 0x31,
- 0x2f, 0x35, 0x06, 0x02, 0x00, 0xb4, 0x0a, 0x0e,
- 0x46, 0x6f, 0x75, 0x72, 0x74, 0x68, 0x20, 0x63,
- 0x68, 0x61, 0x73, 0x73, 0x69, 0x73, 0x0c, 0x18,
- 0x4c, 0x6f, 0x6e, 0x67, 0x20, 0x63, 0x68, 0x61,
- 0x73, 0x73, 0x69, 0x73, 0x20, 0x64, 0x65, 0x73,
- 0x63, 0x72, 0x69, 0x70, 0x74, 0x69, 0x6f, 0x6e,
- 0x0e, 0x04, 0x00, 0x18, 0x00, 0x18, 0x08, 0x15,
- 0x46, 0x61, 0x6b, 0x65, 0x20, 0x70, 0x6f, 0x72,
- 0x74, 0x20, 0x64, 0x65, 0x73, 0x63, 0x72, 0x69,
- 0x70, 0x74, 0x69, 0x6f, 0x6e, 0xfe, 0x09, 0x00,
- 0x12, 0x0f, 0x03, 0x03, 0x00, 0x00, 0x00, 0x05,
- 0xfe, 0x09, 0x00, 0x12, 0x0f, 0x01, 0x03, 0x6c,
- 0x00, 0x00, 0x10, 0xfe, 0x06, 0x00, 0x12, 0x0f,
- 0x04, 0x05, 0xec, 0x00, 0x00 };
+ struct lldpd_chassis *nchassis = NULL;
+ struct lldpd_port *nport = NULL;
struct packet *pkt;
/* Populate port and chassis */
return;
}
pkt = TAILQ_FIRST(&pkts);
- ck_assert_int_eq(pkt->size, sizeof(pkt1));
- fail_unless(memcmp(pkt->data, pkt1, sizeof(pkt1)) == 0);
fail_unless(TAILQ_NEXT(pkt, next) == NULL, "more than one packet sent");
+
+ /* decode the retrieved packet calling lldp_decode() */
+ fail_unless(lldp_decode(NULL, pkt->data, pkt->size, &hardware,
+ &nchassis, &nport) != -1);
+ if (!nchassis || !nport) {
+ fail("unable to decode packet");
+ return;
+ }
+ /* verify port values */
+ check_received_port(&hardware.h_lport, nport);
+ /* verify chassis values */
+ check_received_chassis(&chassis, nchassis);
+ /* verify dot3 values */
+ check_received_port_dot3(&hardware.h_lport, nport);
}
END_TEST
#endif
}
END_TEST
-#ifdef ENABLE_DOT1
-START_TEST (test_recv_vlans)
-{
- char pkt1[] = {
- 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e, 0x00, 0x1f,
- 0x46, 0xd2, 0xfc, 0x01, 0x88, 0xcc, 0x02, 0x07,
- 0x04, 0x00, 0x1f, 0x46, 0xd2, 0xfc, 0x00, 0x04,
- 0x07, 0x03, 0x00, 0x1f, 0x46, 0xd2, 0xfc, 0x15,
- 0x06, 0x02, 0x00, 0x78, 0x08, 0x07, 0x50, 0x6f,
- 0x72, 0x74, 0x20, 0x32, 0x31, 0x0a, 0x07, 0x73,
- 0x77, 0x69, 0x74, 0x63, 0x68, 0x31, 0x0c, 0x4c,
- 0x45, 0x74, 0x68, 0x65, 0x72, 0x6e, 0x65, 0x74,
- 0x20, 0x52, 0x6f, 0x75, 0x74, 0x69, 0x6e, 0x67,
- 0x20, 0x53, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20,
- 0x35, 0x35, 0x31, 0x30, 0x2d, 0x32, 0x34, 0x54,
- 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x48, 0x57,
- 0x3a, 0x33, 0x33, 0x20, 0x20, 0x20, 0x20, 0x20,
- 0x20, 0x20, 0x46, 0x57, 0x3a, 0x35, 0x2e, 0x30,
- 0x2e, 0x30, 0x2e, 0x34, 0x20, 0x20, 0x20, 0x53,
- 0x57, 0x3a, 0x76, 0x35, 0x2e, 0x31, 0x2e, 0x30,
- 0x2e, 0x30, 0x31, 0x34, 0x0e, 0x04, 0x00, 0x14,
- 0x00, 0x04, 0x10, 0x15, 0x05, 0x01, 0xac, 0x14,
- 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x09,
- 0x2b, 0x06, 0x01, 0x04, 0x01, 0x2d, 0x03, 0x34,
- 0x01, 0xfe, 0x06, 0x00, 0x80, 0xc2, 0x01, 0x01,
- 0xf4, 0xfe, 0x0f, 0x00, 0x80, 0xc2, 0x03, 0x01,
- 0xf4, 0x08, 0x54, 0x65, 0x73, 0x74, 0x56, 0x6c,
- 0x61, 0x6e, 0xfe, 0x10, 0x00, 0x80, 0xc2, 0x03,
- 0x01, 0xf5, 0x09, 0x54, 0x65, 0x73, 0x74, 0x56,
- 0x6c, 0x61, 0x6e, 0x32, 0xfe, 0x10, 0x00, 0x80,
- 0xc2, 0x03, 0x01, 0xf6, 0x09, 0x54, 0x65, 0x73,
- 0x74, 0x56, 0x6c, 0x61, 0x6e, 0x33, 0xfe, 0x0d,
- 0x00, 0x80, 0xc2, 0x04, 0x08, 0x00, 0x26, 0x42,
- 0x42, 0x03, 0x00, 0x00, 0x00, 0xfe, 0x08, 0x00,
- 0x80, 0xc2, 0x04, 0x03, 0x88, 0x8e, 0x01, 0xfe,
- 0x07, 0x00, 0x80, 0xc2, 0x04, 0x02, 0x88, 0xcc,
- 0x00, 0x00 };
- /* This is:
-Ethernet II, Src: Nortel_d2:fc:01 (00:1f:46:d2:fc:01), Dst: LLDP_Multicast (01:80:c2:00:00:0e)
- Destination: LLDP_Multicast (01:80:c2:00:00:0e)
- Source: Nortel_d2:fc:01 (00:1f:46:d2:fc:01)
- Type: 802.1 Link Layer Discovery Protocol (LLDP) (0x88cc)
-Link Layer Discovery Protocol
- Chassis Subtype = MAC address
- 0000 001. .... .... = TLV Type: Chassis Id (1)
- .... ...0 0000 0111 = TLV Length: 7
- Chassis Id Subtype: MAC address (4)
- Chassis Id: Nortel_d2:fc:00 (00:1f:46:d2:fc:00)
- Port Subtype = MAC address
- 0000 010. .... .... = TLV Type: Port Id (2)
- .... ...0 0000 0111 = TLV Length: 7
- Port Id Subtype: MAC address (3)
- Port Id: Nortel_d2:fc:15 (00:1f:46:d2:fc:15)
- Time To Live = 120 sec
- 0000 011. .... .... = TLV Type: Time to Live (3)
- .... ...0 0000 0010 = TLV Length: 2
- Seconds: 120
- Port Description = Port 21
- 0000 100. .... .... = TLV Type: Port Description (4)
- .... ...0 0000 0111 = TLV Length: 7
- Port Description: Port 21
- System Name = switch1
- 0000 101. .... .... = TLV Type: System Name (5)
- .... ...0 0000 0111 = TLV Length: 7
- System Name = switch1
- System Description = Ethernet Routing Switch 5510-24T HW:33 FW:5.0.0.4 SW:v5.1.0.014
- 0000 110. .... .... = TLV Type: System Description (6)
- .... ...0 0100 1100 = TLV Length: 76
- System Description = Ethernet Routing Switch 5510-24T HW:33 FW:5.0.0.4 SW:v5.1.0.014
- Capabilities
- 0000 111. .... .... = TLV Type: System Capabilities (7)
- .... ...0 0000 0100 = TLV Length: 4
- Capabilities: 0x0014
- .... .... .... .1.. = Bridge
- .... .... ...1 .... = Router
- Enabled Capabilities: 0x0004
- .... .... .... .1.. = Bridge
- Management Address
- 0001 000. .... .... = TLV Type: Management Address (8)
- .... ...0 0001 0101 = TLV Length: 21
- Address String Length: 5
- Address Subtype: IPv4 (1)
- Management Address: 172.20.3.2 (172.20.3.2)
- Interface Subtype: Unknown (1)
- Interface Number: 0
- OID String Length: 9
- Object Identifier: 2B060104012D033401
- IEEE 802.1 - Port VLAN ID
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0110 = TLV Length: 6
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: Port VLAN ID (0x01)
- Port VLAN Identifier: 500 (0x01F4)
- IEEE 802.1 - VLAN Name
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1111 = TLV Length: 15
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: VLAN Name (0x03)
- VLAN Identifier: 500 (0x01F4)
- VLAN Name Length: 8
- VLAN Name: TestVlan
- IEEE 802.1 - VLAN Name
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0001 0000 = TLV Length: 16
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: VLAN Name (0x03)
- VLAN Identifier: 501 (0x01F5)
- VLAN Name Length: 9
- VLAN Name: TestVlan2
- IEEE 802.1 - VLAN Name
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0001 0000 = TLV Length: 16
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: VLAN Name (0x03)
- VLAN Identifier: 502 (0x01F6)
- VLAN Name Length: 9
- VLAN Name: TestVlan3
- IEEE 802.1 - Protocol Identity
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1101 = TLV Length: 13
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: Protocol Identity (0x04)
- Protocol Identity Length: 8
- Protocol Identity: 0026424203000000
- IEEE 802.1 - Protocol Identity
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1000 = TLV Length: 8
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: Protocol Identity (0x04)
- Protocol Identity Length: 3
- Protocol Identity: 888E01
- IEEE 802.1 - Protocol Identity
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0111 = TLV Length: 7
- Organization Unique Code: IEEE 802.1 (0x0080c2)
- IEEE 802.1 Subtype: Protocol Identity (0x04)
- Protocol Identity Length: 2
- Protocol Identity: 88CC
- End of LLDPDU
- 0000 000. .... .... = TLV Type: End of LLDPDU (0)
- .... ...0 0000 0000 = TLV Length: 0
- */
- struct lldpd_chassis *nchassis = NULL;
- struct lldpd_port *nport = NULL;
- char mac1[] = { 0x00, 0x1f, 0x46, 0xd2, 0xfc, 0x00 };
- char mac2[] = { 0x00, 0x1f, 0x46, 0xd2, 0xfc, 0x15 };
- struct lldpd_vlan *vlan;
-
- fail_unless(lldp_decode(NULL, pkt1, sizeof(pkt1), &hardware,
- &nchassis, &nport) != -1);
- if (!nchassis || !nport) {
- fail("unable to decode packet");
- return;
- }
- ck_assert_int_eq(nchassis->c_id_subtype,
- LLDP_CHASSISID_SUBTYPE_LLADDR);
- ck_assert_int_eq(nchassis->c_id_len, ETH_ALEN);
- fail_unless(memcmp(mac1, nchassis->c_id, ETH_ALEN) == 0);
- ck_assert_int_eq(nport->p_id_subtype,
- LLDP_PORTID_SUBTYPE_LLADDR);
- ck_assert_int_eq(nport->p_id_len, ETH_ALEN);
- fail_unless(memcmp(mac2, nport->p_id, ETH_ALEN) == 0);
- ck_assert_int_eq(nchassis->c_ttl, 120);
- ck_assert_str_eq(nchassis->c_name, "switch1");
- ck_assert_str_eq(nchassis->c_descr,
- "Ethernet Routing Switch 5510-24T HW:33 FW:5.0.0.4 SW:v5.1.0.014");
- ck_assert_str_eq(nport->p_descr, "Port 21");
- ck_assert_int_eq(nchassis->c_cap_available,
- LLDP_CAP_ROUTER | LLDP_CAP_BRIDGE);
- ck_assert_int_eq(nchassis->c_cap_enabled,
- LLDP_CAP_BRIDGE);
- ck_assert_int_eq(nchassis->c_mgmt.s_addr,
- (u_int32_t)inet_addr("172.20.3.2"));
- ck_assert_int_eq(nchassis->c_mgmt_if, 0);
- if (TAILQ_EMPTY(&nport->p_vlans)) {
- fail("no VLAN");
- return;
- }
- vlan = TAILQ_FIRST(&nport->p_vlans);
- ck_assert_int_eq(vlan->v_vid, 500);
- ck_assert_str_eq(vlan->v_name, "TestVlan");
- vlan = TAILQ_NEXT(vlan, v_entries);
- if (!vlan) {
- fail("no more VLAN");
- return;
- }
- ck_assert_int_eq(vlan->v_vid, 501);
- ck_assert_str_eq(vlan->v_name, "TestVlan2");
- vlan = TAILQ_NEXT(vlan, v_entries);
- if (!vlan) {
- fail("no more VLAN");
- return;
- }
- ck_assert_int_eq(vlan->v_vid, 502);
- ck_assert_str_eq(vlan->v_name, "TestVlan3");
- vlan = TAILQ_NEXT(vlan, v_entries);
- fail_unless(vlan == NULL);
-}
-END_TEST
-#endif
-
-#ifdef ENABLE_LLDPMED
-START_TEST (test_recv_med)
-{
- char pkt1[] = {
- 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e, 0x00, 0x13,
- 0x21, 0x57, 0xca, 0x7f, 0x88, 0xcc, 0x02, 0x07,
- 0x04, 0x00, 0x13, 0x21, 0x57, 0xca, 0x40, 0x04,
- 0x02, 0x07, 0x31, 0x06, 0x02, 0x00, 0x78, 0x08,
- 0x01, 0x31, 0x0a, 0x1a, 0x50, 0x72, 0x6f, 0x43,
- 0x75, 0x72, 0x76, 0x65, 0x20, 0x53, 0x77, 0x69,
- 0x74, 0x63, 0x68, 0x20, 0x32, 0x36, 0x30, 0x30,
- 0x2d, 0x38, 0x2d, 0x50, 0x57, 0x52, 0x0c, 0x5f,
- 0x50, 0x72, 0x6f, 0x43, 0x75, 0x72, 0x76, 0x65,
- 0x20, 0x4a, 0x38, 0x37, 0x36, 0x32, 0x41, 0x20,
- 0x53, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x32,
- 0x36, 0x30, 0x30, 0x2d, 0x38, 0x2d, 0x50, 0x57,
- 0x52, 0x2c, 0x20, 0x72, 0x65, 0x76, 0x69, 0x73,
- 0x69, 0x6f, 0x6e, 0x20, 0x48, 0x2e, 0x30, 0x38,
- 0x2e, 0x38, 0x39, 0x2c, 0x20, 0x52, 0x4f, 0x4d,
- 0x20, 0x48, 0x2e, 0x30, 0x38, 0x2e, 0x35, 0x58,
- 0x20, 0x28, 0x2f, 0x73, 0x77, 0x2f, 0x63, 0x6f,
- 0x64, 0x65, 0x2f, 0x62, 0x75, 0x69, 0x6c, 0x64,
- 0x2f, 0x66, 0x69, 0x73, 0x68, 0x28, 0x74, 0x73,
- 0x5f, 0x30, 0x38, 0x5f, 0x35, 0x29, 0x29, 0x0e,
- 0x04, 0x00, 0x14, 0x00, 0x04, 0x10, 0x0c, 0x05,
- 0x01, 0x0f, 0xff, 0x7a, 0x94, 0x02, 0x00, 0x00,
- 0x00, 0x00, 0x00,
-#ifdef ENABLE_DOT3
- 0xfe, 0x09, 0x00, 0x12, 0x0f,
- 0x01, 0x03, 0x6c, 0x00, 0x00, 0x10,
-#endif
- 0xfe, 0x07,
- 0x00, 0x12, 0xbb, 0x01, 0x00, 0x0f, 0x04, 0xfe,
- 0x08, 0x00, 0x12, 0xbb, 0x02, 0x01, 0x40, 0x65,
- 0xae, 0xfe, 0x2e, 0x00, 0x12, 0xbb, 0x03, 0x02,
- 0x28, 0x02, 0x55, 0x53, 0x01, 0x02, 0x43, 0x41,
- 0x03, 0x09, 0x52, 0x6f, 0x73, 0x65, 0x76, 0x69,
- 0x6c, 0x6c, 0x65, 0x06, 0x09, 0x46, 0x6f, 0x6f,
- 0x74, 0x68, 0x69, 0x6c, 0x6c, 0x73, 0x13, 0x04,
- 0x38, 0x30, 0x30, 0x30, 0x1a, 0x03, 0x52, 0x33,
- 0x4c, 0xfe, 0x07, 0x00, 0x12, 0xbb, 0x04, 0x03,
- 0x00, 0x41, 0x00, 0x00 };
- /* This is:
-Ethernet II, Src: HewlettP_57:ca:7f (00:13:21:57:ca:7f), Dst: LLDP_Multicast (01:80:c2:00:00:0e)
- Destination: LLDP_Multicast (01:80:c2:00:00:0e)
- Source: HewlettP_57:ca:7f (00:13:21:57:ca:7f)
- Type: 802.1 Link Layer Discovery Protocol (LLDP) (0x88cc)
-Link Layer Discovery Protocol
- Chassis Subtype = MAC address
- 0000 001. .... .... = TLV Type: Chassis Id (1)
- .... ...0 0000 0111 = TLV Length: 7
- Chassis Id Subtype: MAC address (4)
- Chassis Id: HewlettP_57:ca:40 (00:13:21:57:ca:40)
- Port Subtype = Locally assigned
- 0000 010. .... .... = TLV Type: Port Id (2)
- .... ...0 0000 0010 = TLV Length: 2
- Port Id Subtype: Locally assigned (7)
- Port Id: 1
- Time To Live = 120 sec
- 0000 011. .... .... = TLV Type: Time to Live (3)
- .... ...0 0000 0010 = TLV Length: 2
- Seconds: 120
- Port Description = 1
- 0000 100. .... .... = TLV Type: Port Description (4)
- .... ...0 0000 0001 = TLV Length: 1
- Port Description: 1
- System Name = ProCurve Switch 2600-8-PWR
- 0000 101. .... .... = TLV Type: System Name (5)
- .... ...0 0001 1010 = TLV Length: 26
- System Name = ProCurve Switch 2600-8-PWR
- System Description = ProCurve J8762A Switch 2600-8-PWR, revision H.08.89, ROM H.08.5X (/sw/code/build/fish(ts_08_5))
- 0000 110. .... .... = TLV Type: System Description (6)
- .... ...0 0101 1111 = TLV Length: 95
- System Description = ProCurve J8762A Switch 2600-8-PWR, revision H.08.89, ROM H.08.5X (/sw/code/build/fish(ts_08_5))
- Capabilities
- 0000 111. .... .... = TLV Type: System Capabilities (7)
- .... ...0 0000 0100 = TLV Length: 4
- Capabilities: 0x0014
- .... .... .... .1.. = Bridge
- .... .... ...1 .... = Router
- Enabled Capabilities: 0x0004
- .... .... .... .1.. = Bridge
- Management Address
- 0001 000. .... .... = TLV Type: Management Address (8)
- .... ...0 0000 1100 = TLV Length: 12
- Address String Length: 5
- Address Subtype: IPv4 (1)
- Management Address: 15.255.122.148 (15.255.122.148)
- Interface Subtype: ifIndex (2)
- Interface Number: 0
- OID String Length: 0
- IEEE 802.3 - MAC/PHY Configuration/Status
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1001 = TLV Length: 9
- Organization Unique Code: IEEE 802.3 (0x00120f)
- IEEE 802.3 Subtype: MAC/PHY Configuration/Status (0x01)
- Auto-Negotiation Support/Status: 0x03
- .... ...1 = Auto-Negotiation: Supported
- .... ..1. = Auto-Negotiation: Enabled
- PMD Auto-Negotiation Advertised Capability: 0x6C00
- .... .1.. .... .... = 100BASE-TX (full duplex mode)
- .... 1... .... .... = 100BASE-TX (half duplex mode)
- ..1. .... .... .... = 10BASE-T (full duplex mode)
- .1.. .... .... .... = 10BASE-T (half duplex mode)
- Operational MAU Type: 100BaseTXFD - 2 pair category 5 UTP, full duplex mode (0x0010)
- TIA - Media Capabilities
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0111 = TLV Length: 7
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Media Capabilities (0x01)
- Capabilities: 0x000f
- .... .... .... ...1 = LLDP-MED Capabilities
- .... .... .... ..1. = Network Policy
- .... .... .... .1.. = Location Identification
- .... .... .... 1... = Extended Power via MDI-PSE
- Class Type: Network Connectivity
- TIA - Network Policy
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 1000 = TLV Length: 8
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Network Policy (0x02)
- Applicaton Type: Voice (1)
- 0... .... .... .... = Policy: Defined
- .1.. .... .... .... = Tagged: Yes
- ...0 0000 0110 010. = VLAN Id: 50
- .... ...1 10.. .... = L2 Priority: 6
- ..10 1110 = DSCP Value: 46
- TIA - Location Identification
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0010 1110 = TLV Length: 46
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Location Identification (0x03)
- Location Data Format: Civic Address LCI (2)
- LCI Length: 40
-[...]
- TIA - Extended Power-via-MDI
- 1111 111. .... .... = TLV Type: Organization Specific (127)
- .... ...0 0000 0111 = TLV Length: 7
- Organization Unique Code: TIA (0x0012bb)
- Media Subtype: Extended Power-via-MDI (0x04)
- 00.. .... = Power Type: PSE Device
- ..00 .... = Power Source: Unknown
- .... 0011 = Power Priority: Low
- Power Value: 65
- End of LLDPDU
- 0000 000. .... .... = TLV Type: End of LLDPDU (0)
- .... ...0 0000 0000 = TLV Length: 0
- */
- struct lldpd_chassis *nchassis = NULL;
- struct lldpd_port *nport = NULL;
- char mac1[] = { 0x00, 0x13, 0x21, 0x57, 0xca, 0x40 };
-
- fail_unless(lldp_decode(NULL, pkt1, sizeof(pkt1), &hardware,
- &nchassis, &nport) != -1);
- if (!nchassis || !nport) {
- fail("unable to decode packet");
- return;
- }
- ck_assert_int_eq(nchassis->c_id_subtype,
- LLDP_CHASSISID_SUBTYPE_LLADDR);
- ck_assert_int_eq(nchassis->c_id_len, ETH_ALEN);
- fail_unless(memcmp(mac1, nchassis->c_id, ETH_ALEN) == 0);
- ck_assert_int_eq(nport->p_id_subtype,
- LLDP_PORTID_SUBTYPE_LOCAL);
- ck_assert_int_eq(nport->p_id_len, 1);
- ck_assert_int_eq(nport->p_id[0], '1');
- ck_assert_int_eq(nchassis->c_ttl, 120);
- ck_assert_str_eq(nchassis->c_name, "ProCurve Switch 2600-8-PWR");
- ck_assert_str_eq(nchassis->c_descr,
- "ProCurve J8762A Switch 2600-8-PWR, revision H.08.89, ROM H.08.5X (/sw/code/build/fish(ts_08_5))");
- ck_assert_str_eq(nport->p_descr, "1");
- ck_assert_int_eq(nchassis->c_cap_available,
- LLDP_CAP_ROUTER | LLDP_CAP_BRIDGE);
- ck_assert_int_eq(nchassis->c_cap_enabled,
- LLDP_CAP_BRIDGE);
- ck_assert_int_eq(nchassis->c_mgmt.s_addr,
- (u_int32_t)inet_addr("15.255.122.148"));
- ck_assert_int_eq(nchassis->c_mgmt_if, 0);
-#ifdef ENABLE_DOT3
- ck_assert_int_eq(nport->p_macphy.autoneg_enabled, 1);
- ck_assert_int_eq(nport->p_macphy.autoneg_support, 1);
- ck_assert_int_eq(nport->p_macphy.autoneg_advertised,
- LLDP_DOT3_LINK_AUTONEG_100BASE_TXFD |
- LLDP_DOT3_LINK_AUTONEG_100BASE_TX |
- LLDP_DOT3_LINK_AUTONEG_10BASET_FD |
- LLDP_DOT3_LINK_AUTONEG_10BASE_T);
- ck_assert_int_eq(nport->p_macphy.mau_type,
- LLDP_DOT3_MAU_100BASETXFD);
-#endif
- ck_assert_int_eq(nchassis->c_med_cap_available,
- LLDPMED_CAP_CAP | LLDPMED_CAP_POLICY |
- LLDPMED_CAP_LOCATION | LLDPMED_CAP_MDI_PSE);
- ck_assert_int_eq(nchassis->c_med_type, LLDPMED_NETWORK_DEVICE);
- ck_assert_int_eq(nport->p_med_policy[LLDPMED_APPTYPE_VOICE-1].type,
- LLDPMED_APPTYPE_VOICE);
- ck_assert_int_eq(nport->p_med_policy[LLDPMED_APPTYPE_VOICE-1].unknown,
- 0);
- ck_assert_int_eq(nport->p_med_policy[LLDPMED_APPTYPE_VOICE-1].tagged,
- 1);
- ck_assert_int_eq(nport->p_med_policy[LLDPMED_APPTYPE_VOICE-1].vid,
- 50);
- ck_assert_int_eq(nport->p_med_policy[LLDPMED_APPTYPE_VOICE-1].priority,
- 6);
- ck_assert_int_eq(nport->p_med_policy[LLDPMED_APPTYPE_VOICE-1].dscp,
- 46);
- ck_assert_int_eq(nport->p_med_policy[LLDPMED_APPTYPE_SOFTPHONEVOICE-1].type,
- 0);
- ck_assert_int_eq(nport->p_med_location[LLDPMED_LOCFORMAT_CIVIC-1].format,
- LLDPMED_LOCFORMAT_CIVIC);
- ck_assert_int_eq(nport->p_med_location[LLDPMED_LOCFORMAT_COORD-1].format,
- 0);
- ck_assert_int_eq(nport->p_med_power.val, 65);
- ck_assert_int_eq(nport->p_med_power.source, LLDPMED_POW_SOURCE_UNKNOWN);
- ck_assert_int_eq(nport->p_med_power.priority, LLDPMED_POW_PRIO_LOW);
- ck_assert_int_eq(nport->p_med_power.devicetype, LLDPMED_POW_TYPE_PSE);
-}
-END_TEST
-#endif
-
Suite *
lldp_suite(void)
{
TCase *tc_send = tcase_create("Send LLDP packets");
tcase_add_checked_fixture(tc_send, pcap_setup, pcap_teardown);
- tcase_add_test(tc_send, test_send_basic);
+ tcase_add_test(tc_send, test_send_rcv_basic);
#ifdef ENABLE_DOT1
- tcase_add_test(tc_send, test_send_vlan);
+ tcase_add_test(tc_send, test_send_rcv_dot1_tlvs);
#endif
#ifdef ENABLE_LLDPMED
- tcase_add_test(tc_send, test_send_med);
+ tcase_add_test(tc_send, test_send_rcv_med);
#endif
#ifdef ENABLE_DOT3
- tcase_add_test(tc_send, test_send_dot3);
+ tcase_add_test(tc_send, test_send_rcv_dot3);
#endif
suite_add_tcase(s, tc_send);
TCase *tc_receive = tcase_create("Receive LLDP packets");
tcase_add_test(tc_receive, test_recv_min);
tcase_add_test(tc_receive, test_recv_lldpd);
-#ifdef ENABLE_DOT1
- tcase_add_test(tc_receive, test_recv_vlans);
-#endif
-#ifdef ENABLE_LLDPMED
- tcase_add_test(tc_receive, test_recv_med);
-#endif
suite_add_tcase(s, tc_receive);
return s;
projects / thirdparty / lldpd.git / commitdiff
