--- /dev/null
+From 02c76e319dd2001bedb3ea135c0d4875c05cae5a Mon Sep 17 00:00:00 2001
+From: Lenny Szubowicz <lszubowi@redhat.com>
+Date: Wed, 19 Dec 2018 11:50:52 -0500
+Subject: ACPI/APEI: Clear GHES block_status before panic()
+
+[ Upstream commit 98cff8b23ed1c763a029ee81ea300df0d153d07d ]
+
+In __ghes_panic() clear the block status in the APEI generic
+error status block for that generic hardware error source before
+calling panic() to prevent a second panic() in the crash kernel
+for exactly the same fatal error.
+
+Otherwise ghes_probe(), running in the crash kernel, would see
+an unhandled error in the APEI generic error status block and
+panic again, thereby precluding any crash dump.
+
+Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
+Signed-off-by: David Arcari <darcari@redhat.com>
+Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
+Acked-by: Borislav Petkov <bp@suse.de>
+Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/acpi/apei/ghes.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
+index f14695e744d0..5889f6407fea 100644
+--- a/drivers/acpi/apei/ghes.c
++++ b/drivers/acpi/apei/ghes.c
+@@ -675,6 +675,8 @@ static void __ghes_panic(struct ghes *ghes)
+ {
+ __ghes_print_estatus(KERN_EMERG, ghes->generic, ghes->estatus);
+
++ ghes_clear_estatus(ghes);
++
+ /* reboot to log the error! */
+ if (!panic_timeout)
+ panic_timeout = ghes_panic_timeout;
+--
+2.19.1
+
--- /dev/null
+From 56cc31513311b73874e05d23e2429bf31e1441c2 Mon Sep 17 00:00:00 2001
+From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Date: Wed, 21 Nov 2018 15:43:37 +0200
+Subject: ACPI: SPCR: Consider baud rate 0 as preconfigured state
+
+[ Upstream commit b413b1abeb21b4a152c0bf8d1379efa30759b6e3 ]
+
+Since SPCR 1.04 [1] the baud rate of 0 means a preconfigured state of UART.
+Assume firmware or bootloader configures console correctly.
+
+[1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table
+
+Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Reviewed-by: Prarit Bhargava <prarit@redhat.com>
+Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/acpi/spcr.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
+index 324b35bfe781..f567fa5f0148 100644
+--- a/drivers/acpi/spcr.c
++++ b/drivers/acpi/spcr.c
+@@ -148,6 +148,13 @@ int __init parse_spcr(bool earlycon)
+ }
+
+ switch (table->baud_rate) {
++ case 0:
++ /*
++ * SPCR 1.04 defines 0 as a preconfigured state of UART.
++ * Assume firmware or bootloader configures console correctly.
++ */
++ baud_rate = 0;
++ break;
+ case 3:
+ baud_rate = 9600;
+ break;
+@@ -196,6 +203,10 @@ int __init parse_spcr(bool earlycon)
+ * UART so don't attempt to change to the baud rate state
+ * in the table because driver cannot calculate the dividers
+ */
++ baud_rate = 0;
++ }
++
++ if (!baud_rate) {
+ snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
+ table->serial_port.address);
+ } else {
+--
+2.19.1
+
--- /dev/null
+From f45cad1ea4a614d5971696892b1bfd35bee0a8e2 Mon Sep 17 00:00:00 2001
+From: Yufen Wang <wangyufen@huawei.com>
+Date: Fri, 2 Nov 2018 11:51:31 +0100
+Subject: ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
+
+[ Upstream commit 82c08c3e7f171aa7f579b231d0abbc1d62e91974 ]
+
+In case panic() and panic() called at the same time on different CPUS.
+For example:
+CPU 0:
+ panic()
+ __crash_kexec
+ machine_crash_shutdown
+ crash_smp_send_stop
+ machine_kexec
+ BUG_ON(num_online_cpus() > 1);
+
+CPU 1:
+ panic()
+ local_irq_disable
+ panic_smp_self_stop
+
+If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump
+fails. CPU1 can't receive the ipi irq, CPU1 will be always online.
+To fix this problem, this patch split out the panic_smp_self_stop()
+and add set_cpu_online(smp_processor_id(), false).
+
+Signed-off-by: Yufen Wang <wangyufen@huawei.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/kernel/smp.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
+index e61af0600133..5e31c62127a0 100644
+--- a/arch/arm/kernel/smp.c
++++ b/arch/arm/kernel/smp.c
+@@ -691,6 +691,21 @@ void smp_send_stop(void)
+ pr_warn("SMP: failed to stop secondary CPUs\n");
+ }
+
++/* In case panic() and panic() called at the same time on CPU1 and CPU2,
++ * and CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop()
++ * CPU1 can't receive the ipi irqs from CPU2, CPU1 will be always online,
++ * kdump fails. So split out the panic_smp_self_stop() and add
++ * set_cpu_online(smp_processor_id(), false).
++ */
++void panic_smp_self_stop(void)
++{
++ pr_debug("CPU %u will stop doing anything useful since another CPU has paniced\n",
++ smp_processor_id());
++ set_cpu_online(smp_processor_id(), false);
++ while (1)
++ cpu_relax();
++}
++
+ /*
+ * not supported here
+ */
+--
+2.19.1
+
--- /dev/null
+From 4df02f20522b3018893faaf032e7b26a05aa83db Mon Sep 17 00:00:00 2001
+From: Russell King - ARM Linux <linux@armlinux.org.uk>
+Date: Fri, 7 Dec 2018 09:17:07 -0800
+Subject: ARM: dts: Fix OMAP4430 SDP Ethernet startup
+
+[ Upstream commit 84fb6c7feb1494ebb7d1ec8b95cfb7ada0264465 ]
+
+It was noticed that unbinding and rebinding the KSZ8851 ethernet
+resulted in the driver reporting "failed to read device ID" at probe.
+Probing the reset line with a 'scope while repeatedly attempting to
+bind the driver in a shell loop revealed that the KSZ8851 RSTN pin is
+constantly held at zero, meaning the device is held in reset, and
+does not respond on the SPI bus.
+
+Experimentation with the startup delay on the regulator set to 50ms
+shows that the reset is positively released after 20ms.
+
+Schematics for this board are not available, and the traces are buried
+in the inner layers of the board which makes tracing where the RSTN pin
+extremely difficult. We can only guess that the RSTN pin is wired to a
+reset generator chip driven off the ethernet supply, which fits the
+observed behaviour.
+
+Include this delay in the regulator startup delay - effectively
+treating the reset as a "supply stable" indicator.
+
+This can not be modelled as a delay in the KSZ8851 driver since the
+reset generation is board specific - if the RSTN pin had been wired to
+a GPIO, reset could be released earlier via the already provided support
+in the KSZ8851 driver.
+
+This also got confirmed by Peter Ujfalusi <peter.ujfalusi@ti.com> based
+on Blaze schematics that should be very close to SDP4430:
+
+TPS22902YFPR is used as the regulator switch (gpio48 controlled):
+Convert arm boot_lock to raw The VOUT is routed to TPS3808G01DBV.
+(SCH Note: Threshold set at 90%. Vsense: 0.405V).
+
+According to the TPS3808 data sheet the RESET delay time when Ct is
+open (this is the case in the schema): MIN/TYP/MAX: 12/20/28 ms.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
+[tony@atomide.com: updated with notes from schematics from Peter]
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/omap4-sdp.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
+index 280d92d42bf1..bfad6aadfe88 100644
+--- a/arch/arm/boot/dts/omap4-sdp.dts
++++ b/arch/arm/boot/dts/omap4-sdp.dts
+@@ -33,6 +33,7 @@
+ gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
+ enable-active-high;
+ regulator-boot-on;
++ startup-delay-us = <25000>;
+ };
+
+ vbat: fixedregulator-vbat {
+--
+2.19.1
+
--- /dev/null
+From 4a7dfe0065540923118680eac8c3c6e9714c66e8 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Thu, 17 May 2018 17:00:10 +0200
+Subject: ARM: dts: Fix up the D-Link DIR-685 MTD partition info
+
+[ Upstream commit 738a05e673435afb986b53da43befd83ad87ec3b ]
+
+The vendor firmware was analyzed to get the right idea about
+this flash layout. /proc/mtd contains:
+
+dev: size erasesize name
+mtd0: 01e7ff40 00020000 "rootfs"
+mtd1: 01f40000 00020000 "upgrade"
+mtd2: 00040000 00020000 "rgdb"
+mtd3: 00020000 00020000 "nvram"
+mtd4: 00040000 00020000 "RedBoot"
+mtd5: 00020000 00020000 "LangPack"
+mtd6: 02000000 00020000 "flash"
+
+Here "flash" is obviously the whole device and we know "rootfs"
+is a bogus hack to point to a squashfs rootfs inside of the main
+"upgrade partition". We know "RedBoot" is the first 0x40000 of
+the flash and the "upgrade" partition follows from 0x40000 to
+0x1f8000. So we have mtd0, 1, 4 and 6 covered.
+
+Remains:
+mtd2: 00040000 00020000 "rgdb"
+mtd3: 00020000 00020000 "nvram"
+mtd5: 00020000 00020000 "LangPack"
+
+Inspecting the flash at 0x1f8000 and 0x1fa000 reveals each of
+these starting with "RGCFG1" so we assume 0x1f8000-1fbfff is
+"rgdb" of 0x40000.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/gemini-dlink-dir-685.dts | 16 ++++++----------
+ 1 file changed, 6 insertions(+), 10 deletions(-)
+
+diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+index e75e2d44371c..d6f752ab07bb 100644
+--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
++++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+@@ -128,20 +128,16 @@
+ read-only;
+ };
+ /*
+- * Between the boot loader and the rootfs is the kernel
+- * in a custom Storlink format flashed from the boot
+- * menu. The rootfs is in squashfs format.
++ * This firmware image contains the kernel catenated
++ * with the squashfs root filesystem. For some reason
++ * this is called "upgrade" on the vendor system.
+ */
+- partition@1800c0 {
+- label = "rootfs";
+- reg = <0x001800c0 0x01dbff40>;
+- read-only;
+- };
+- partition@1f40000 {
++ partition@40000 {
+ label = "upgrade";
+- reg = <0x01f40000 0x00040000>;
++ reg = <0x00040000 0x01f40000>;
+ read-only;
+ };
++ /* RGDB, Residental Gateway Database? */
+ partition@1f80000 {
+ label = "rgdb";
+ reg = <0x01f80000 0x00040000>;
+--
+2.19.1
+
--- /dev/null
+From 84360e96153d75fd35ce04bbdf9879d83cb66673 Mon Sep 17 00:00:00 2001
+From: Lubomir Rintel <lkundrak@v3.sk>
+Date: Wed, 28 Nov 2018 18:53:10 +0100
+Subject: ARM: dts: mmp2: fix TWSI2
+
+[ Upstream commit 1147e05ac9fc2ef86a3691e7ca5c2db7602d81dd ]
+
+Marvell keeps their MMP2 datasheet secret, but there are good clues
+that TWSI2 is not on 0xd4025000 on that platform, not does it use
+IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor:
+
+ arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58
+
+I'm taking a somewhat educated guess that is probably a copy & paste
+error from PXA168 or PXA910 and that the real controller in fact hides
+at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17.
+
+I'm also copying some properties from TWSI1 that were missing or
+incorrect.
+
+Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2.
+
+Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
+Tested-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Olof Johansson <olof@lixom.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/boot/dts/mmp2.dtsi | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
+index 766bbb8495b6..47e5b63339d1 100644
+--- a/arch/arm/boot/dts/mmp2.dtsi
++++ b/arch/arm/boot/dts/mmp2.dtsi
+@@ -220,12 +220,15 @@
+ status = "disabled";
+ };
+
+- twsi2: i2c@d4025000 {
++ twsi2: i2c@d4031000 {
+ compatible = "mrvl,mmp-twsi";
+- reg = <0xd4025000 0x1000>;
+- interrupts = <58>;
++ reg = <0xd4031000 0x1000>;
++ interrupt-parent = <&intcmux17>;
++ interrupts = <0>;
+ clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+ resets = <&soc_clocks MMP2_CLK_TWSI1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
+ status = "disabled";
+ };
+
+--
+2.19.1
+
--- /dev/null
+From 37505999896141fee397b0ba93c3dc98b8c4a9e5 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Mon, 10 Dec 2018 21:43:01 +0100
+Subject: ARM: mmp: fix timer_init calls
+
+[ Upstream commit 12d3a30db4a3b3df5fbadf5974b9cf50544a9950 ]
+
+The change to passing the timer frequency as a function argument
+was a good idea, but caused a build failure for one user that
+was missed in the update:
+
+arch/arm/mach-mmp/time.c: In function 'mmp_dt_init_timer':
+arch/arm/mach-mmp/time.c:242:2: error: implicit declaration of function 'timer_init'; did you mean 'hrtimer_init'? [-Werror=implicit-function-declaration]
+
+Change that as well to fix the build error, and rename the
+function to put it into a proper namespace and make it clearer
+what is actually going on.
+
+I saw that the high 6500000 HZ frequency was previously only
+set with CONFIG_MMP2, but is now also used with MMP (pxa910),
+so I'm changing that back here. Please make sure that the
+frequencies are all correct now.
+
+Fixes: f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Olof Johansson <olof@lixom.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/mach-mmp/common.h | 2 +-
+ arch/arm/mach-mmp/mmp2.c | 2 +-
+ arch/arm/mach-mmp/pxa168.c | 2 +-
+ arch/arm/mach-mmp/pxa910.c | 2 +-
+ arch/arm/mach-mmp/time.c | 4 ++--
+ 5 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
+index 5ac2851ef5d3..483b8b6d3005 100644
+--- a/arch/arm/mach-mmp/common.h
++++ b/arch/arm/mach-mmp/common.h
+@@ -2,7 +2,7 @@
+ #include <linux/reboot.h>
+ #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+-extern void timer_init(int irq, unsigned long rate);
++extern void mmp_timer_init(int irq, unsigned long rate);
+
+ extern void __init mmp_map_io(void);
+ extern void mmp_restart(enum reboot_mode, const char *);
+diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
+index fb3e7e32c882..726c1a642dea 100644
+--- a/arch/arm/mach-mmp/mmp2.c
++++ b/arch/arm/mach-mmp/mmp2.c
+@@ -134,7 +134,7 @@ void __init mmp2_timer_init(void)
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+ __raw_writel(clk_rst, APBC_TIMERS);
+
+- timer_init(IRQ_MMP2_TIMER1, 6500000);
++ mmp_timer_init(IRQ_MMP2_TIMER1, 6500000);
+ }
+
+ /* on-chip devices */
+diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
+index 77a358165a56..cdcf65ace3f9 100644
+--- a/arch/arm/mach-mmp/pxa168.c
++++ b/arch/arm/mach-mmp/pxa168.c
+@@ -79,7 +79,7 @@ void __init pxa168_timer_init(void)
+ /* 3.25MHz, bus/functional clock enabled, release reset */
+ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
+
+- timer_init(IRQ_PXA168_TIMER1, 6500000);
++ mmp_timer_init(IRQ_PXA168_TIMER1, 3250000);
+ }
+
+ void pxa168_clear_keypad_wakeup(void)
+diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
+index 1ccbba9ac495..d30a7d12bc98 100644
+--- a/arch/arm/mach-mmp/pxa910.c
++++ b/arch/arm/mach-mmp/pxa910.c
+@@ -116,7 +116,7 @@ void __init pxa910_timer_init(void)
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
+
+- timer_init(IRQ_PXA910_AP1_TIMER1);
++ mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
+ }
+
+ /* on-chip devices */
+diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
+index eab0fd8a7343..f9c295154b94 100644
+--- a/arch/arm/mach-mmp/time.c
++++ b/arch/arm/mach-mmp/time.c
+@@ -184,7 +184,7 @@ static struct irqaction timer_irq = {
+ .dev_id = &ckevt,
+ };
+
+-void __init timer_init(int irq, unsigned long rate)
++void __init mmp_timer_init(int irq, unsigned long rate)
+ {
+ timer_config();
+
+@@ -239,7 +239,7 @@ void __init mmp_dt_init_timer(void)
+ ret = -ENOMEM;
+ goto out;
+ }
+- timer_init(irq, rate);
++ mmp_timer_init(irq, rate);
+ return;
+ out:
+ pr_err("Failed to get timer from device tree with error:%d\n", ret);
+--
+2.19.1
+
--- /dev/null
+From 81bd1f5159f8bac885757894d9b85070f75c9b9a Mon Sep 17 00:00:00 2001
+From: Lubomir Rintel <lkundrak@v3.sk>
+Date: Wed, 28 Nov 2018 18:53:20 +0100
+Subject: ARM: mmp/mmp2: dt: enable the clock
+
+[ Upstream commit f36797ee43802b367e59f0f9a9805304a4ff0c98 ]
+
+The device-tree booted MMP2 needs to enable the timer clock, otherwise
+it would stop ticking when the boot finishes.
+
+It can also use the clock rate from the clk, the non-DT boards need to
+keep using the hardcoded rates.
+
+Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
+Acked-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Olof Johansson <olof@lixom.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/mach-mmp/common.h | 2 +-
+ arch/arm/mach-mmp/mmp2.c | 2 +-
+ arch/arm/mach-mmp/pxa168.c | 2 +-
+ arch/arm/mach-mmp/time.c | 32 ++++++++++++++++++++------------
+ 4 files changed, 23 insertions(+), 15 deletions(-)
+
+diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
+index 7e284d9c429f..5ac2851ef5d3 100644
+--- a/arch/arm/mach-mmp/common.h
++++ b/arch/arm/mach-mmp/common.h
+@@ -2,7 +2,7 @@
+ #include <linux/reboot.h>
+ #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+-extern void timer_init(int irq);
++extern void timer_init(int irq, unsigned long rate);
+
+ extern void __init mmp_map_io(void);
+ extern void mmp_restart(enum reboot_mode, const char *);
+diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
+index afba5460cdaf..fb3e7e32c882 100644
+--- a/arch/arm/mach-mmp/mmp2.c
++++ b/arch/arm/mach-mmp/mmp2.c
+@@ -134,7 +134,7 @@ void __init mmp2_timer_init(void)
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+ __raw_writel(clk_rst, APBC_TIMERS);
+
+- timer_init(IRQ_MMP2_TIMER1);
++ timer_init(IRQ_MMP2_TIMER1, 6500000);
+ }
+
+ /* on-chip devices */
+diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
+index 0f5f16fb8c66..77a358165a56 100644
+--- a/arch/arm/mach-mmp/pxa168.c
++++ b/arch/arm/mach-mmp/pxa168.c
+@@ -79,7 +79,7 @@ void __init pxa168_timer_init(void)
+ /* 3.25MHz, bus/functional clock enabled, release reset */
+ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
+
+- timer_init(IRQ_PXA168_TIMER1);
++ timer_init(IRQ_PXA168_TIMER1, 6500000);
+ }
+
+ void pxa168_clear_keypad_wakeup(void)
+diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
+index 96ad1db0b04b..eab0fd8a7343 100644
+--- a/arch/arm/mach-mmp/time.c
++++ b/arch/arm/mach-mmp/time.c
+@@ -22,6 +22,7 @@
+ #include <linux/kernel.h>
+ #include <linux/interrupt.h>
+ #include <linux/clockchips.h>
++#include <linux/clk.h>
+
+ #include <linux/io.h>
+ #include <linux/irq.h>
+@@ -38,12 +39,6 @@
+ #include "cputype.h"
+ #include "clock.h"
+
+-#ifdef CONFIG_CPU_MMP2
+-#define MMP_CLOCK_FREQ 6500000
+-#else
+-#define MMP_CLOCK_FREQ 3250000
+-#endif
+-
+ #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
+
+ #define MAX_DELTA (0xfffffffe)
+@@ -189,19 +184,18 @@ static struct irqaction timer_irq = {
+ .dev_id = &ckevt,
+ };
+
+-void __init timer_init(int irq)
++void __init timer_init(int irq, unsigned long rate)
+ {
+ timer_config();
+
+- sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
++ sched_clock_register(mmp_read_sched_clock, 32, rate);
+
+ ckevt.cpumask = cpumask_of(0);
+
+ setup_irq(irq, &timer_irq);
+
+- clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
+- clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
+- MIN_DELTA, MAX_DELTA);
++ clocksource_register_hz(&cksrc, rate);
++ clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
+ }
+
+ #ifdef CONFIG_OF
+@@ -213,7 +207,9 @@ static const struct of_device_id mmp_timer_dt_ids[] = {
+ void __init mmp_dt_init_timer(void)
+ {
+ struct device_node *np;
++ struct clk *clk;
+ int irq, ret;
++ unsigned long rate;
+
+ np = of_find_matching_node(NULL, mmp_timer_dt_ids);
+ if (!np) {
+@@ -221,6 +217,18 @@ void __init mmp_dt_init_timer(void)
+ goto out;
+ }
+
++ clk = of_clk_get(np, 0);
++ if (!IS_ERR(clk)) {
++ ret = clk_prepare_enable(clk);
++ if (ret)
++ goto out;
++ rate = clk_get_rate(clk) / 2;
++ } else if (cpu_is_pj4()) {
++ rate = 6500000;
++ } else {
++ rate = 3250000;
++ }
++
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ ret = -EINVAL;
+@@ -231,7 +239,7 @@ void __init mmp_dt_init_timer(void)
+ ret = -ENOMEM;
+ goto out;
+ }
+- timer_init(irq);
++ timer_init(irq, rate);
+ return;
+ out:
+ pr_err("Failed to get timer from device tree with error:%d\n", ret);
+--
+2.19.1
+
--- /dev/null
+From 2bb61648567d4f30ee9808c5d8df80afe7c165a5 Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <natechancellor@gmail.com>
+Date: Wed, 17 Oct 2018 17:52:07 -0700
+Subject: ARM: OMAP2+: hwmod: Fix some section annotations
+
+[ Upstream commit c10b26abeb53cabc1e6271a167d3f3d396ce0218 ]
+
+When building the kernel with Clang, the following section mismatch
+warnings appears:
+
+WARNING: vmlinux.o(.text+0x2d398): Section mismatch in reference from
+the function _setup() to the function .init.text:_setup_iclk_autoidle()
+The function _setup() references
+the function __init _setup_iclk_autoidle().
+This is often because _setup lacks a __init
+annotation or the annotation of _setup_iclk_autoidle is wrong.
+
+WARNING: vmlinux.o(.text+0x2d3a0): Section mismatch in reference from
+the function _setup() to the function .init.text:_setup_reset()
+The function _setup() references
+the function __init _setup_reset().
+This is often because _setup lacks a __init
+annotation or the annotation of _setup_reset is wrong.
+
+WARNING: vmlinux.o(.text+0x2d408): Section mismatch in reference from
+the function _setup() to the function .init.text:_setup_postsetup()
+The function _setup() references
+the function __init _setup_postsetup().
+This is often because _setup lacks a __init
+annotation or the annotation of _setup_postsetup is wrong.
+
+_setup is used in omap_hwmod_allocate_module, which isn't marked __init
+and looks like it shouldn't be, meaning to fix these warnings, those
+functions must be moved out of the init section, which this patch does.
+
+Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
+index 2dbd63239c54..45c8f2ef4e23 100644
+--- a/arch/arm/mach-omap2/omap_hwmod.c
++++ b/arch/arm/mach-omap2/omap_hwmod.c
+@@ -2497,7 +2497,7 @@ static int __init _init(struct omap_hwmod *oh, void *data)
+ * a stub; implementing this properly requires iclk autoidle usecounting in
+ * the clock code. No return value.
+ */
+-static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
++static void _setup_iclk_autoidle(struct omap_hwmod *oh)
+ {
+ struct omap_hwmod_ocp_if *os;
+
+@@ -2528,7 +2528,7 @@ static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
+ * reset. Returns 0 upon success or a negative error code upon
+ * failure.
+ */
+-static int __init _setup_reset(struct omap_hwmod *oh)
++static int _setup_reset(struct omap_hwmod *oh)
+ {
+ int r;
+
+@@ -2589,7 +2589,7 @@ static int __init _setup_reset(struct omap_hwmod *oh)
+ *
+ * No return value.
+ */
+-static void __init _setup_postsetup(struct omap_hwmod *oh)
++static void _setup_postsetup(struct omap_hwmod *oh)
+ {
+ u8 postsetup_state;
+
+--
+2.19.1
+
--- /dev/null
+From 22412ea81e59d988cba9d2a59897dbf571f49d57 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Mon, 10 Dec 2018 22:58:39 +0100
+Subject: ARM: pxa: avoid section mismatch warning
+
+[ Upstream commit 88af3209aa0881aa5ffd99664b6080a4be5f24e5 ]
+
+WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info()
+The function littleton_init_lcd() references
+the function __init pxa_set_fb_info().
+This is often because littleton_init_lcd lacks a __init
+annotation or the annotation of pxa_set_fb_info is wrong.
+
+WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info()
+The function zeus_register_ohci() references
+the function __init pxa_set_ohci_info().
+This is often because zeus_register_ohci lacks a __init
+annotation or the annotation of pxa_set_ohci_info is wrong.
+
+WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info()
+The function cm_x300_init_u2d() references
+the function __init pxa3xx_set_u2d_info().
+This is often because cm_x300_init_u2d lacks a __init
+annotation or the annotation of pxa3xx_set_u2d_info is wrong.
+
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Olof Johansson <olof@lixom.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm/mach-pxa/cm-x300.c | 2 +-
+ arch/arm/mach-pxa/littleton.c | 2 +-
+ arch/arm/mach-pxa/zeus.c | 2 +-
+ 3 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
+index 868448d2cd82..38ab30869821 100644
+--- a/arch/arm/mach-pxa/cm-x300.c
++++ b/arch/arm/mach-pxa/cm-x300.c
+@@ -547,7 +547,7 @@ static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+ .exit = cm_x300_u2d_exit,
+ };
+
+-static void cm_x300_init_u2d(void)
++static void __init cm_x300_init_u2d(void)
+ {
+ pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+ }
+diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
+index fae38fdc8d8e..5cd6b4bd31e0 100644
+--- a/arch/arm/mach-pxa/littleton.c
++++ b/arch/arm/mach-pxa/littleton.c
+@@ -183,7 +183,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
+ };
+
+-static void littleton_init_lcd(void)
++static void __init littleton_init_lcd(void)
+ {
+ pxa_set_fb_info(NULL, &littleton_lcd_info);
+ }
+diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
+index ecbcaee5a2d5..c293ea0a7eaf 100644
+--- a/arch/arm/mach-pxa/zeus.c
++++ b/arch/arm/mach-pxa/zeus.c
+@@ -558,7 +558,7 @@ static struct pxaohci_platform_data zeus_ohci_platform_data = {
+ .flags = ENABLE_PORT_ALL | POWER_SENSE_LOW,
+ };
+
+-static void zeus_register_ohci(void)
++static void __init zeus_register_ohci(void)
+ {
+ /* Port 2 is shared between host and client interface. */
+ UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+--
+2.19.1
+
--- /dev/null
+From b94e603d35460c953521748a47adf9049c721ad8 Mon Sep 17 00:00:00 2001
+From: Mark Rutland <mark.rutland@arm.com>
+Date: Thu, 15 Nov 2018 22:42:01 +0000
+Subject: arm64: ftrace: don't adjust the LR value
+
+[ Upstream commit 6e803e2e6e367db9a0d6ecae1bd24bb5752011bd ]
+
+The core ftrace code requires that when it is handed the PC of an
+instrumented function, this PC is the address of the instrumented
+instruction. This is necessary so that the core ftrace code can identify
+the specific instrumentation site. Since the instrumented function will
+be a BL, the address of the instrumented function is LR - 4 at entry to
+the ftrace code.
+
+This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers,
+which acquire the PC of the instrumented function.
+
+The mcount_get_lr helper is used to acquire the LR of the instrumented
+function, whose value does not require this adjustment, and cannot be
+adjusted to anything meaningful. No adjustment of this value is made on
+other architectures, including arm. However, arm64 adjusts this value by
+4.
+
+This patch brings arm64 in line with other architectures and removes the
+adjustment of the LR value.
+
+Signed-off-by: Mark Rutland <mark.rutland@arm.com>
+Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
+Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+Cc: Catalin Marinas <catalin.marinas@arm.com>
+Cc: Torsten Duwe <duwe@suse.de>
+Cc: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/kernel/entry-ftrace.S | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
+index e1be42e11ff5..5a10e3a3e843 100644
+--- a/arch/arm64/kernel/entry-ftrace.S
++++ b/arch/arm64/kernel/entry-ftrace.S
+@@ -79,7 +79,6 @@
+ .macro mcount_get_lr reg
+ ldr \reg, [x29]
+ ldr \reg, [\reg, #8]
+- mcount_adjust_addr \reg, \reg
+ .endm
+
+ .macro mcount_get_lr_addr reg
+--
+2.19.1
+
--- /dev/null
+From 7ccd6aa1f0e440c518a608e32d4f580ca6eeb3bd Mon Sep 17 00:00:00 2001
+From: Will Deacon <will.deacon@arm.com>
+Date: Wed, 7 Nov 2018 23:06:15 +0000
+Subject: arm64: io: Ensure calls to delay routines are ordered against prior
+ readX()
+
+[ Upstream commit 6460d32014717686d3b7963595950ba2c6d1bb5e ]
+
+A relatively standard idiom for ensuring that a pair of MMIO writes to a
+device arrive at that device with a specified minimum delay between them
+is as follows:
+
+ writel_relaxed(42, dev_base + CTL1);
+ readl(dev_base + CTL1);
+ udelay(10);
+ writel_relaxed(42, dev_base + CTL2);
+
+the intention being that the read-back from the device will push the
+prior write to CTL1, and the udelay will hold up the write to CTL1 until
+at least 10us have elapsed.
+
+Unfortunately, on arm64 where the underlying delay loop is implemented
+as a read of the architected counter, the CPU does not guarantee
+ordering from the readl() to the delay loop and therefore the delay loop
+could in theory be speculated and not provide the desired interval
+between the two writes.
+
+Fix this in a similar manner to PowerPC by introducing a dummy control
+dependency on the output of readX() which, combined with the ISB in the
+read of the architected counter, guarantees that a subsequent delay loop
+can not be executed until the readX() has returned its result.
+
+Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
+Cc: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/include/asm/io.h | 31 +++++++++++++++++++++++--------
+ 1 file changed, 23 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
+index 35b2e50f17fb..b2bc7dbc1fa6 100644
+--- a/arch/arm64/include/asm/io.h
++++ b/arch/arm64/include/asm/io.h
+@@ -106,7 +106,22 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
+ }
+
+ /* IO barriers */
+-#define __iormb() rmb()
++#define __iormb(v) \
++({ \
++ unsigned long tmp; \
++ \
++ rmb(); \
++ \
++ /* \
++ * Create a dummy control dependency from the IO read to any \
++ * later instructions. This ensures that a subsequent call to \
++ * udelay() will be ordered due to the ISB in get_cycles(). \
++ */ \
++ asm volatile("eor %0, %1, %1\n" \
++ "cbnz %0, ." \
++ : "=r" (tmp) : "r" (v) : "memory"); \
++})
++
+ #define __iowmb() wmb()
+
+ #define mmiowb() do { } while (0)
+@@ -131,10 +146,10 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
+ * following Normal memory access. Writes are ordered relative to any prior
+ * Normal memory access.
+ */
+-#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; })
+-#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+-#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+-#define readq(c) ({ u64 __v = readq_relaxed(c); __iormb(); __v; })
++#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(__v); __v; })
++#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(__v); __v; })
++#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(__v); __v; })
++#define readq(c) ({ u64 __v = readq_relaxed(c); __iormb(__v); __v; })
+
+ #define writeb(v,c) ({ __iowmb(); writeb_relaxed((v),(c)); })
+ #define writew(v,c) ({ __iowmb(); writew_relaxed((v),(c)); })
+@@ -185,9 +200,9 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
+ /*
+ * io{read,write}{16,32,64}be() macros
+ */
+-#define ioread16be(p) ({ __u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+-#define ioread32be(p) ({ __u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
+-#define ioread64be(p) ({ __u64 __v = be64_to_cpu((__force __be64)__raw_readq(p)); __iormb(); __v; })
++#define ioread16be(p) ({ __u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(__v); __v; })
++#define ioread32be(p) ({ __u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(__v); __v; })
++#define ioread64be(p) ({ __u64 __v = be64_to_cpu((__force __be64)__raw_readq(p)); __iormb(__v); __v; })
+
+ #define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force __u16)cpu_to_be16(v), p); })
+ #define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
+--
+2.19.1
+
--- /dev/null
+From ae0f8cc26fd6cdc697e20268f98ac5714adf82ca Mon Sep 17 00:00:00 2001
+From: Will Deacon <will.deacon@arm.com>
+Date: Thu, 29 Nov 2018 16:31:04 +0000
+Subject: arm64: io: Ensure value passed to __iormb() is held in a 64-bit
+ register
+
+[ Upstream commit 1b57ec8c75279b873639eb44a215479236f93481 ]
+
+As of commit 6460d3201471 ("arm64: io: Ensure calls to delay routines
+are ordered against prior readX()"), MMIO reads smaller than 64 bits
+fail to compile under clang because we end up mixing 32-bit and 64-bit
+register operands for the same data processing instruction:
+
+./include/asm-generic/io.h:695:9: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
+ return readb(addr);
+ ^
+./arch/arm64/include/asm/io.h:147:58: note: expanded from macro 'readb'
+ ^
+./include/asm-generic/io.h:695:9: note: use constraint modifier "w"
+./arch/arm64/include/asm/io.h:147:50: note: expanded from macro 'readb'
+ ^
+./arch/arm64/include/asm/io.h:118:24: note: expanded from macro '__iormb'
+ asm volatile("eor %0, %1, %1\n" \
+ ^
+
+Fix the build by casting the macro argument to 'unsigned long' when used
+as an input to the inline asm.
+
+Reported-by: Nick Desaulniers <nick.desaulniers@gmail.com>
+Reported-by: Nathan Chancellor <natechancellor@gmail.com>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/arm64/include/asm/io.h | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
+index b2bc7dbc1fa6..49bb9a020a09 100644
+--- a/arch/arm64/include/asm/io.h
++++ b/arch/arm64/include/asm/io.h
+@@ -119,7 +119,8 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
+ */ \
+ asm volatile("eor %0, %1, %1\n" \
+ "cbnz %0, ." \
+- : "=r" (tmp) : "r" (v) : "memory"); \
++ : "=r" (tmp) : "r" ((unsigned long)(v)) \
++ : "memory"); \
+ })
+
+ #define __iowmb() wmb()
+--
+2.19.1
+
--- /dev/null
+From 5914466764e6ea444117ebdc1eca84850968bd01 Mon Sep 17 00:00:00 2001
+From: Mark Rutland <mark.rutland@arm.com>
+Date: Fri, 9 Nov 2018 15:07:10 +0000
+Subject: arm64: KVM: Skip MMIO insn after emulation
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 0d640732dbebed0f10f18526de21652931f0b2f2 ]
+
+When we emulate an MMIO instruction, we advance the CPU state within
+decode_hsr(), before emulating the instruction effects.
+
+Having this logic in decode_hsr() is opaque, and advancing the state
+before emulation is problematic. It gets in the way of applying
+consistent single-step logic, and it prevents us from being able to fail
+an MMIO instruction with a synchronous exception.
+
+Clean this up by only advancing the CPU state *after* the effects of the
+instruction are emulated.
+
+Cc: Peter Maydell <peter.maydell@linaro.org>
+Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
+Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
+Signed-off-by: Mark Rutland <mark.rutland@arm.com>
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ virt/kvm/arm/mmio.c | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+diff --git a/virt/kvm/arm/mmio.c b/virt/kvm/arm/mmio.c
+index dac7ceb1a677..08443a15e6be 100644
+--- a/virt/kvm/arm/mmio.c
++++ b/virt/kvm/arm/mmio.c
+@@ -117,6 +117,12 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
+ vcpu_set_reg(vcpu, vcpu->arch.mmio_decode.rt, data);
+ }
+
++ /*
++ * The MMIO instruction is emulated and should not be re-executed
++ * in the guest.
++ */
++ kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
++
+ return 0;
+ }
+
+@@ -144,11 +150,6 @@ static int decode_hsr(struct kvm_vcpu *vcpu, bool *is_write, int *len)
+ vcpu->arch.mmio_decode.sign_extend = sign_extend;
+ vcpu->arch.mmio_decode.rt = rt;
+
+- /*
+- * The MMIO instruction is emulated and should not be re-executed
+- * in the guest.
+- */
+- kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+ return 0;
+ }
+
+--
+2.19.1
+
--- /dev/null
+From b72646fbc9010817cdef6c50197ac00b7c33a74c Mon Sep 17 00:00:00 2001
+From: Fabio Estevam <festevam@gmail.com>
+Date: Thu, 13 Dec 2018 00:08:38 -0200
+Subject: ASoC: fsl: Fix SND_SOC_EUKREA_TLV320 build error on i.MX8M
+
+[ Upstream commit add6883619a9e3bf9658eaff1a547354131bbcd9 ]
+
+eukrea-tlv320.c machine driver runs on non-DT platforms
+and include <asm/mach-types.h> header file in order to be able
+to use some machine_is_eukrea_xxx() macros.
+
+Building it for ARM64 causes the following build error:
+
+sound/soc/fsl/eukrea-tlv320.c:28:10: fatal error: asm/mach-types.h: No such file or directory
+
+Avoid this error by not allowing to build the SND_SOC_EUKREA_TLV320
+driver when ARM64 is selected.
+
+This is needed in preparation for the i.MX8M support.
+
+Reported-by: kbuild test robot <lkp@intel.com>
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+Acked-by: Shawn Guo <shawnguo@kernel.org>
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/fsl/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
+index 37f9b6201918..4087deeda7cf 100644
+--- a/sound/soc/fsl/Kconfig
++++ b/sound/soc/fsl/Kconfig
+@@ -221,7 +221,7 @@ config SND_SOC_PHYCORE_AC97
+
+ config SND_SOC_EUKREA_TLV320
+ tristate "Eukrea TLV320"
+- depends on ARCH_MXC && I2C
++ depends on ARCH_MXC && !ARM64 && I2C
+ select SND_SOC_TLV320AIC23_I2C
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+--
+2.19.1
+
--- /dev/null
+From 00dffd286959e952866b916c4af31295cd471b39 Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Sat, 3 Nov 2018 22:21:22 +0100
+Subject: ASoC: Intel: mrfld: fix uninitialized variable access
+
+[ Upstream commit 1539c7f23f256120f89f8b9ec53160790bce9ed2 ]
+
+Randconfig testing revealed a very old bug, with gcc-8:
+
+sound/soc/intel/atom/sst/sst_loader.c: In function 'sst_load_fw':
+sound/soc/intel/atom/sst/sst_loader.c:357:5: error: 'fw' may be used uninitialized in this function [-Werror=maybe-uninitialized]
+ if (fw == NULL) {
+ ^
+sound/soc/intel/atom/sst/sst_loader.c:354:25: note: 'fw' was declared here
+ const struct firmware *fw;
+
+We must check the return code of request_firmware() before we look at the
+pointer result that may be uninitialized when the function fails.
+
+Fixes: 9012c9544eea ("ASoC: Intel: mrfld - Add DSP load and management")
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Signed-off-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ sound/soc/intel/atom/sst/sst_loader.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/sound/soc/intel/atom/sst/sst_loader.c b/sound/soc/intel/atom/sst/sst_loader.c
+index 33917146d9c4..054b1d514e8a 100644
+--- a/sound/soc/intel/atom/sst/sst_loader.c
++++ b/sound/soc/intel/atom/sst/sst_loader.c
+@@ -354,14 +354,14 @@ static int sst_request_fw(struct intel_sst_drv *sst)
+ const struct firmware *fw;
+
+ retval = request_firmware(&fw, sst->firmware_name, sst->dev);
+- if (fw == NULL) {
+- dev_err(sst->dev, "fw is returning as null\n");
+- return -EINVAL;
+- }
+ if (retval) {
+ dev_err(sst->dev, "request fw failed %d\n", retval);
+ return retval;
+ }
++ if (fw == NULL) {
++ dev_err(sst->dev, "fw is returning as null\n");
++ return -EINVAL;
++ }
+ mutex_lock(&sst->sst_lock);
+ retval = sst_cache_and_parse_fw(sst, fw);
+ mutex_unlock(&sst->sst_lock);
+--
+2.19.1
+
--- /dev/null
+From 0ef49f6e2b5caddc27846fd7db78f542b94efe3c Mon Sep 17 00:00:00 2001
+From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
+Date: Fri, 2 Nov 2018 21:49:55 +0100
+Subject: ath9k: dynack: use authentication messages for 'late' ack
+
+[ Upstream commit 3831a2a0010c72e3956020cbf1057a1701a2e469 ]
+
+In order to properly support dynack in ad-hoc mode running
+wpa_supplicant, take into account authentication frames for
+'late ack' detection. This patch has been tested on devices
+mounted on offshore high-voltage stations connected through
+~24Km link
+
+Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
+Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
+Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/wireless/ath/ath9k/dynack.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
+index 7334c9b09e82..cc0dc966c512 100644
+--- a/drivers/net/wireless/ath/ath9k/dynack.c
++++ b/drivers/net/wireless/ath/ath9k/dynack.c
+@@ -187,7 +187,8 @@ void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
+ /* late ACK */
+ if (ts->ts_status & ATH9K_TXERR_XRETRY) {
+ if (ieee80211_is_assoc_req(hdr->frame_control) ||
+- ieee80211_is_assoc_resp(hdr->frame_control)) {
++ ieee80211_is_assoc_resp(hdr->frame_control) ||
++ ieee80211_is_auth(hdr->frame_control)) {
+ ath_dbg(common, DYNACK, "late ack\n");
+ ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
+ ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
+--
+2.19.1
+
--- /dev/null
+From 4aa7545b892ca052af8e5c3c30dfd8f5bdcad9b1 Mon Sep 17 00:00:00 2001
+From: Finn Thain <fthain@telegraphics.com.au>
+Date: Mon, 31 Dec 2018 16:44:09 +1100
+Subject: block/swim3: Fix -EBUSY error when re-opening device after unmount
+
+[ Upstream commit 296dcc40f2f2e402facf7cd26cf3f2c8f4b17d47 ]
+
+When the block device is opened with FMODE_EXCL, ref_count is set to -1.
+This value doesn't get reset when the device is closed which means the
+device cannot be opened again. Fix this by checking for refcount <= 0
+in the release method.
+
+Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
+Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
+Cc: linuxppc-dev@lists.ozlabs.org
+Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/block/swim3.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
+index 0d7527c6825a..2f7acdb830c3 100644
+--- a/drivers/block/swim3.c
++++ b/drivers/block/swim3.c
+@@ -1027,7 +1027,11 @@ static void floppy_release(struct gendisk *disk, fmode_t mode)
+ struct swim3 __iomem *sw = fs->swim3;
+
+ mutex_lock(&swim3_mutex);
+- if (fs->ref_count > 0 && --fs->ref_count == 0) {
++ if (fs->ref_count > 0)
++ --fs->ref_count;
++ else if (fs->ref_count == -1)
++ fs->ref_count = 0;
++ if (fs->ref_count == 0) {
+ swim3_action(fs, MOTOR_OFF);
+ out_8(&sw->control_bic, 0xff);
+ swim3_select(fs, RELAX);
+--
+2.19.1
+
--- /dev/null
+From 6b216388f5a01bc40c278c4aab02253b30d07b02 Mon Sep 17 00:00:00 2001
+From: Johan Hedberg <johan.hedberg@intel.com>
+Date: Tue, 27 Nov 2018 11:37:46 +0200
+Subject: Bluetooth: Fix unnecessary error message for HCI request completion
+
+[ Upstream commit 1629db9c75342325868243d6bca5853017d91cf8 ]
+
+In case a command which completes in Command Status was sent using the
+hci_cmd_send-family of APIs there would be a misleading error in the
+hci_get_cmd_complete function, since the code would be trying to fetch
+the Command Complete parameters when there are none.
+
+Avoid the misleading error and silently bail out from the function in
+case the received event is a command status.
+
+Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
+Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
+Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/bluetooth/hci_event.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
+index 01f211e31f47..363dc85bbc5c 100644
+--- a/net/bluetooth/hci_event.c
++++ b/net/bluetooth/hci_event.c
+@@ -5212,6 +5212,12 @@ static bool hci_get_cmd_complete(struct hci_dev *hdev, u16 opcode,
+ return true;
+ }
+
++ /* Check if request ended in Command Status - no way to retreive
++ * any extra parameters in this case.
++ */
++ if (hdr->evt == HCI_EV_CMD_STATUS)
++ return false;
++
+ if (hdr->evt != HCI_EV_CMD_COMPLETE) {
+ BT_DBG("Last event is not cmd complete (0x%2.2x)", hdr->evt);
+ return false;
+--
+2.19.1
+
--- /dev/null
+From 2590f717cfd952f726597e4ebf0800154be5e5f5 Mon Sep 17 00:00:00 2001
+From: Anand Jain <anand.jain@oracle.com>
+Date: Mon, 15 Oct 2018 10:45:17 +0800
+Subject: btrfs: harden agaist duplicate fsid on scanned devices
+
+[ Upstream commit a9261d4125c97ce8624e9941b75dee1b43ad5df9 ]
+
+It's not that impossible to imagine that a device OR a btrfs image is
+copied just by using the dd or the cp command. Which in case both the
+copies of the btrfs will have the same fsid. If on the system with
+automount enabled, the copied FS gets scanned.
+
+We have a known bug in btrfs, that we let the device path be changed
+after the device has been mounted. So using this loop hole the new
+copied device would appears as if its mounted immediately after it's
+been copied.
+
+For example:
+
+Initially.. /dev/mmcblk0p4 is mounted as /
+
+ $ lsblk
+ NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+ mmcblk0 179:0 0 29.2G 0 disk
+ |-mmcblk0p4 179:4 0 4G 0 part /
+ |-mmcblk0p2 179:2 0 500M 0 part /boot
+ |-mmcblk0p3 179:3 0 256M 0 part [SWAP]
+ `-mmcblk0p1 179:1 0 256M 0 part /boot/efi
+
+ $ btrfs fi show
+ Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
+ Total devices 1 FS bytes used 1.40GiB
+ devid 1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4
+
+Copy mmcblk0 to sda
+
+ $ dd if=/dev/mmcblk0 of=/dev/sda
+
+And immediately after the copy completes the change in the device
+superblock is notified which the automount scans using btrfs device scan
+and the new device sda becomes the mounted root device.
+
+ $ lsblk
+ NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+ sda 8:0 1 14.9G 0 disk
+ |-sda4 8:4 1 4G 0 part /
+ |-sda2 8:2 1 500M 0 part
+ |-sda3 8:3 1 256M 0 part
+ `-sda1 8:1 1 256M 0 part
+ mmcblk0 179:0 0 29.2G 0 disk
+ |-mmcblk0p4 179:4 0 4G 0 part
+ |-mmcblk0p2 179:2 0 500M 0 part /boot
+ |-mmcblk0p3 179:3 0 256M 0 part [SWAP]
+ `-mmcblk0p1 179:1 0 256M 0 part /boot/efi
+
+ $ btrfs fi show /
+ Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
+ Total devices 1 FS bytes used 1.40GiB
+ devid 1 size 4.00GiB used 3.00GiB path /dev/sda4
+
+The bug is quite nasty that you can't either unmount /dev/sda4 or
+/dev/mmcblk0p4. And the problem does not get solved until you take sda
+out of the system on to another system to change its fsid using the
+'btrfstune -u' command.
+
+Signed-off-by: Anand Jain <anand.jain@oracle.com>
+Reviewed-by: David Sterba <dsterba@suse.com>
+Signed-off-by: David Sterba <dsterba@suse.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/btrfs/volumes.c | 29 +++++++++++++++++++++++++++++
+ 1 file changed, 29 insertions(+)
+
+diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
+index 9663b6aa2a56..1e8d216720a2 100644
+--- a/fs/btrfs/volumes.c
++++ b/fs/btrfs/volumes.c
+@@ -696,6 +696,35 @@ static noinline int device_list_add(const char *path,
+ return -EEXIST;
+ }
+
++ /*
++ * We are going to replace the device path for a given devid,
++ * make sure it's the same device if the device is mounted
++ */
++ if (device->bdev) {
++ struct block_device *path_bdev;
++
++ path_bdev = lookup_bdev(path);
++ if (IS_ERR(path_bdev)) {
++ mutex_unlock(&fs_devices->device_list_mutex);
++ return ERR_CAST(path_bdev);
++ }
++
++ if (device->bdev != path_bdev) {
++ bdput(path_bdev);
++ mutex_unlock(&fs_devices->device_list_mutex);
++ btrfs_warn_in_rcu(device->fs_info,
++ "duplicate device fsid:devid for %pU:%llu old:%s new:%s",
++ disk_super->fsid, devid,
++ rcu_str_deref(device->name), path);
++ return ERR_PTR(-EEXIST);
++ }
++ bdput(path_bdev);
++ btrfs_info_in_rcu(device->fs_info,
++ "device fsid %pU devid %llu moved old:%s new:%s",
++ disk_super->fsid, devid,
++ rcu_str_deref(device->name), path);
++ }
++
+ name = rcu_string_strdup(path, GFP_NOFS);
+ if (!name)
+ return -ENOMEM;
+--
+2.19.1
+
--- /dev/null
+From 0aa45b61d06f4c6a6b1614721c54d04502387138 Mon Sep 17 00:00:00 2001
+From: Ondrej Mosnacek <omosnace@redhat.com>
+Date: Thu, 13 Dec 2018 15:17:37 +0100
+Subject: cgroup: fix parsing empty mount option string
+
+[ Upstream commit e250d91d65750a0c0c62483ac4f9f357e7317617 ]
+
+This fixes the case where all mount options specified are consumed by an
+LSM and all that's left is an empty string. In this case cgroupfs should
+accept the string and not fail.
+
+How to reproduce (with SELinux enabled):
+
+ # umount /sys/fs/cgroup/unified
+ # mount -o context=system_u:object_r:cgroup_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified
+ mount: /sys/fs/cgroup/unified: wrong fs type, bad option, bad superblock on cgroup2, missing codepage or helper program, or other error.
+ # dmesg | tail -n 1
+ [ 31.575952] cgroup: cgroup2: unknown option ""
+
+Fixes: 67e9c74b8a87 ("cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type")
+[NOTE: should apply on top of commit 5136f6365ce3 ("cgroup: implement "nsdelegate" mount option"), older versions need manual rebase]
+Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
+Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
+Signed-off-by: Tejun Heo <tj@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ kernel/cgroup/cgroup.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
+index 109c32c56de7..21bbfc09e395 100644
+--- a/kernel/cgroup/cgroup.c
++++ b/kernel/cgroup/cgroup.c
+@@ -1692,7 +1692,7 @@ static int parse_cgroup_root_flags(char *data, unsigned int *root_flags)
+
+ *root_flags = 0;
+
+- if (!data)
++ if (!data || *data == '\0')
+ return 0;
+
+ while ((token = strsep(&data, ",")) != NULL) {
+--
+2.19.1
+
--- /dev/null
+From 4abf3d121ab4f02f1a1ed7e91d6e225c2e95957c Mon Sep 17 00:00:00 2001
+From: Ronnie Sahlberg <lsahlber@redhat.com>
+Date: Thu, 13 Dec 2018 08:06:16 +1000
+Subject: cifs: check ntwrk_buf_start for NULL before dereferencing it
+
+[ Upstream commit 59a63e479ce36a3f24444c3a36efe82b78e4a8e0 ]
+
+RHBZ: 1021460
+
+There is an issue where when multiple threads open/close the same directory
+ntwrk_buf_start might end up being NULL, causing the call to smbCalcSize
+later to oops with a NULL deref.
+
+The real bug is why this happens and why this can become NULL for an
+open cfile, which should not be allowed.
+This patch tries to avoid a oops until the time when we fix the underlying
+issue.
+
+Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
+Signed-off-by: Steve French <stfrench@microsoft.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/cifs/readdir.c | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
+index ef24b4527459..68183872bf8b 100644
+--- a/fs/cifs/readdir.c
++++ b/fs/cifs/readdir.c
+@@ -655,7 +655,14 @@ find_cifs_entry(const unsigned int xid, struct cifs_tcon *tcon, loff_t pos,
+ /* scan and find it */
+ int i;
+ char *cur_ent;
+- char *end_of_smb = cfile->srch_inf.ntwrk_buf_start +
++ char *end_of_smb;
++
++ if (cfile->srch_inf.ntwrk_buf_start == NULL) {
++ cifs_dbg(VFS, "ntwrk_buf_start is NULL during readdir\n");
++ return -EIO;
++ }
++
++ end_of_smb = cfile->srch_inf.ntwrk_buf_start +
+ server->ops->calc_smb_size(
+ cfile->srch_inf.ntwrk_buf_start);
+
+--
+2.19.1
+
--- /dev/null
+From d6edb1532b05483f99b611dde47a3a2f14267ee4 Mon Sep 17 00:00:00 2001
+From: Yi Wang <wang.yi59@zte.com.cn>
+Date: Wed, 31 Oct 2018 15:41:41 +0800
+Subject: clk: boston: fix possible memory leak in clk_boston_setup()
+
+[ Upstream commit 46fda5b5067a391912cf73bf3d32c26b6a22ad09 ]
+
+Smatch report warnings:
+drivers/clk/imgtec/clk-boston.c:76 clk_boston_setup() warn: possible memory leak of 'onecell'
+drivers/clk/imgtec/clk-boston.c:83 clk_boston_setup() warn: possible memory leak of 'onecell'
+drivers/clk/imgtec/clk-boston.c:90 clk_boston_setup() warn: possible memory leak of 'onecell'
+
+'onecell' is malloced in clk_boston_setup(), but not be freed
+before leaving from the error handling cases.
+
+Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/clk/imgtec/clk-boston.c | 11 ++++++++---
+ 1 file changed, 8 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/clk/imgtec/clk-boston.c b/drivers/clk/imgtec/clk-boston.c
+index 15af423cc0c9..f5d54a64d33c 100644
+--- a/drivers/clk/imgtec/clk-boston.c
++++ b/drivers/clk/imgtec/clk-boston.c
+@@ -73,27 +73,32 @@ static void __init clk_boston_setup(struct device_node *np)
+ hw = clk_hw_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register input clock: %ld\n", PTR_ERR(hw));
+- return;
++ goto error;
+ }
+ onecell->hws[BOSTON_CLK_INPUT] = hw;
+
+ hw = clk_hw_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register sys clock: %ld\n", PTR_ERR(hw));
+- return;
++ goto error;
+ }
+ onecell->hws[BOSTON_CLK_SYS] = hw;
+
+ hw = clk_hw_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+ if (IS_ERR(hw)) {
+ pr_err("failed to register cpu clock: %ld\n", PTR_ERR(hw));
+- return;
++ goto error;
+ }
+ onecell->hws[BOSTON_CLK_CPU] = hw;
+
+ err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, onecell);
+ if (err)
+ pr_err("failed to add DT provider: %d\n", err);
++
++ return;
++
++error:
++ kfree(onecell);
+ }
+
+ /*
+--
+2.19.1
+
--- /dev/null
+From 3ad50d2f4c94c94b495d711e9fb3c00e29e95a2a Mon Sep 17 00:00:00 2001
+From: Anson Huang <anson.huang@nxp.com>
+Date: Fri, 30 Nov 2018 07:23:47 +0000
+Subject: clk: imx6sl: ensure MMDC CH0 handshake is bypassed
+
+[ Upstream commit 0efcc2c0fd2001a83240a8c3d71f67770484917e ]
+
+Same as other i.MX6 SoCs, ensure unused MMDC channel's
+handshake is bypassed, this is to make sure no request
+signal will be generated when periphe_clk_sel is changed
+or SRC warm reset is triggered.
+
+Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/clk/imx/clk-imx6sl.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
+index 9642cdf0fb88..c264a744fae8 100644
+--- a/drivers/clk/imx/clk-imx6sl.c
++++ b/drivers/clk/imx/clk-imx6sl.c
+@@ -17,6 +17,8 @@
+
+ #include "clk.h"
+
++#define CCDR 0x4
++#define BM_CCM_CCDR_MMDC_CH0_MASK (1 << 17)
+ #define CCSR 0xc
+ #define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2)
+ #define CACRR 0x10
+@@ -414,6 +416,10 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
+ clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+
++ /* Ensure the MMDC CH0 handshake is bypassed */
++ writel_relaxed(readl_relaxed(base + CCDR) |
++ BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
++
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
+
+ clk_data.clks = clks;
+--
+2.19.1
+
--- /dev/null
+From 7316478328f9de927c0089dba73ad205a1917dc9 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Wed, 5 Dec 2018 18:11:51 +0800
+Subject: clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module
+ clocks
+
+[ Upstream commit 6e6da2039c82271dd873b9ad2b902a692a7dd554 ]
+
+All the audio interfaces on Allwinner SoCs need to change their module
+clocks during operation, to switch between support for 44.1 kHz and 48
+kHz family sample rates. The clock rate for the module clocks is
+governed by their upstream audio PLL. The module clocks themselves only
+have a gate, and sometimes a divider or mux. Thus any rate changes need
+to be propagated upstream.
+
+Set the CLK_SET_RATE_PARENT flag for all audio module clocks to achieve
+this.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+index 13eb5b23c5e7..c40d572a7602 100644
+--- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
++++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+@@ -366,10 +366,10 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+ static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+- 0x0b0, 16, 2, BIT(31), 0);
++ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+ static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+- 0x0b4, 16, 2, BIT(31), 0);
++ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+ /* TODO: the parent for most of the USB clocks is not known */
+ static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
+@@ -446,7 +446,7 @@ static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+ static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+ static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x",
+- 0x140, BIT(30), 0);
++ 0x140, BIT(30), CLK_SET_RATE_PARENT);
+ static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
+ 0x144, BIT(31), 0);
+
+--
+2.19.1
+
--- /dev/null
+From da3173d3058200129d97a32efdd40ae33eb8d9a8 Mon Sep 17 00:00:00 2001
+From: Yangtao Li <tiny.windzz@gmail.com>
+Date: Mon, 10 Dec 2018 11:26:41 -0500
+Subject: cpuidle: big.LITTLE: fix refcount leak
+
+[ Upstream commit 9456823c842f346c74265fcd98d008d87a7eb6f5 ]
+
+of_find_node_by_path() acquires a reference to the node
+returned by it and that reference needs to be dropped by its caller.
+bl_idle_init() doesn't do that, so fix it.
+
+Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
+Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
+Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cpuidle/cpuidle-big_little.c | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
+index db2ede565f1a..b44476a1b7ad 100644
+--- a/drivers/cpuidle/cpuidle-big_little.c
++++ b/drivers/cpuidle/cpuidle-big_little.c
+@@ -167,6 +167,7 @@ static int __init bl_idle_init(void)
+ {
+ int ret;
+ struct device_node *root = of_find_node_by_path("/");
++ const struct of_device_id *match_id;
+
+ if (!root)
+ return -ENODEV;
+@@ -174,7 +175,11 @@ static int __init bl_idle_init(void)
+ /*
+ * Initialize the driver just for a compliant set of machines
+ */
+- if (!of_match_node(compatible_machine_match, root))
++ match_id = of_match_node(compatible_machine_match, root);
++
++ of_node_put(root);
++
++ if (!match_id)
+ return -ENODEV;
+
+ if (!mcpm_is_available())
+--
+2.19.1
+
--- /dev/null
+From 6c24c4ca0ba16bcaf51d3a4ab363280b8570ee60 Mon Sep 17 00:00:00 2001
+From: Eric Biggers <ebiggers@google.com>
+Date: Wed, 17 Oct 2018 21:37:58 -0700
+Subject: crypto: aes_ti - disable interrupts while accessing S-box
+
+[ Upstream commit 0a6a40c2a8c184a2fb467efacfb1cd338d719e0b ]
+
+In the "aes-fixed-time" AES implementation, disable interrupts while
+accessing the S-box, in order to make cache-timing attacks more
+difficult. Previously it was possible for the CPU to be interrupted
+while the S-box was loaded into L1 cache, potentially evicting the
+cachelines and causing later table lookups to be time-variant.
+
+In tests I did on x86 and ARM, this doesn't affect performance
+significantly. Responsiveness is potentially a concern, but interrupts
+are only disabled for a single AES block.
+
+Note that even after this change, the implementation still isn't
+necessarily guaranteed to be constant-time; see
+https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion
+of the many difficulties involved in writing truly constant-time AES
+software. But it's valuable to make such attacks more difficult.
+
+Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+Signed-off-by: Eric Biggers <ebiggers@google.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ crypto/Kconfig | 3 ++-
+ crypto/aes_ti.c | 18 ++++++++++++++++++
+ 2 files changed, 20 insertions(+), 1 deletion(-)
+
+diff --git a/crypto/Kconfig b/crypto/Kconfig
+index 5579eb88d460..84f99f8eca4b 100644
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -930,7 +930,8 @@ config CRYPTO_AES_TI
+ 8 for decryption), this implementation only uses just two S-boxes of
+ 256 bytes each, and attempts to eliminate data dependent latencies by
+ prefetching the entire table into the cache at the start of each
+- block.
++ block. Interrupts are also disabled to avoid races where cachelines
++ are evicted when the CPU is interrupted to do something else.
+
+ config CRYPTO_AES_586
+ tristate "AES cipher algorithms (i586)"
+diff --git a/crypto/aes_ti.c b/crypto/aes_ti.c
+index 03023b2290e8..1ff9785b30f5 100644
+--- a/crypto/aes_ti.c
++++ b/crypto/aes_ti.c
+@@ -269,6 +269,7 @@ static void aesti_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+ const u32 *rkp = ctx->key_enc + 4;
+ int rounds = 6 + ctx->key_length / 4;
+ u32 st0[4], st1[4];
++ unsigned long flags;
+ int round;
+
+ st0[0] = ctx->key_enc[0] ^ get_unaligned_le32(in);
+@@ -276,6 +277,12 @@ static void aesti_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+ st0[2] = ctx->key_enc[2] ^ get_unaligned_le32(in + 8);
+ st0[3] = ctx->key_enc[3] ^ get_unaligned_le32(in + 12);
+
++ /*
++ * Temporarily disable interrupts to avoid races where cachelines are
++ * evicted when the CPU is interrupted to do something else.
++ */
++ local_irq_save(flags);
++
+ st0[0] ^= __aesti_sbox[ 0] ^ __aesti_sbox[128];
+ st0[1] ^= __aesti_sbox[32] ^ __aesti_sbox[160];
+ st0[2] ^= __aesti_sbox[64] ^ __aesti_sbox[192];
+@@ -300,6 +307,8 @@ static void aesti_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+ put_unaligned_le32(subshift(st1, 1) ^ rkp[5], out + 4);
+ put_unaligned_le32(subshift(st1, 2) ^ rkp[6], out + 8);
+ put_unaligned_le32(subshift(st1, 3) ^ rkp[7], out + 12);
++
++ local_irq_restore(flags);
+ }
+
+ static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+@@ -308,6 +317,7 @@ static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+ const u32 *rkp = ctx->key_dec + 4;
+ int rounds = 6 + ctx->key_length / 4;
+ u32 st0[4], st1[4];
++ unsigned long flags;
+ int round;
+
+ st0[0] = ctx->key_dec[0] ^ get_unaligned_le32(in);
+@@ -315,6 +325,12 @@ static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+ st0[2] = ctx->key_dec[2] ^ get_unaligned_le32(in + 8);
+ st0[3] = ctx->key_dec[3] ^ get_unaligned_le32(in + 12);
+
++ /*
++ * Temporarily disable interrupts to avoid races where cachelines are
++ * evicted when the CPU is interrupted to do something else.
++ */
++ local_irq_save(flags);
++
+ st0[0] ^= __aesti_inv_sbox[ 0] ^ __aesti_inv_sbox[128];
+ st0[1] ^= __aesti_inv_sbox[32] ^ __aesti_inv_sbox[160];
+ st0[2] ^= __aesti_inv_sbox[64] ^ __aesti_inv_sbox[192];
+@@ -339,6 +355,8 @@ static void aesti_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+ put_unaligned_le32(inv_subshift(st1, 1) ^ rkp[5], out + 4);
+ put_unaligned_le32(inv_subshift(st1, 2) ^ rkp[6], out + 8);
+ put_unaligned_le32(inv_subshift(st1, 3) ^ rkp[7], out + 12);
++
++ local_irq_restore(flags);
+ }
+
+ static struct crypto_alg aes_alg = {
+--
+2.19.1
+
--- /dev/null
+From f156d9501c22f41f236ec2470de9f1e9930afa03 Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <natechancellor@gmail.com>
+Date: Mon, 10 Dec 2018 16:49:29 -0700
+Subject: crypto: ux500 - Use proper enum in cryp_set_dma_transfer
+
+[ Upstream commit 9d880c5945c748d8edcac30965f3349a602158c4 ]
+
+Clang warns when one enumerated type is implicitly converted to another:
+
+drivers/crypto/ux500/cryp/cryp_core.c:559:5: warning: implicit
+conversion from enumeration type 'enum dma_data_direction' to different
+enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
+ direction, DMA_CTRL_ACK);
+ ^~~~~~~~~
+drivers/crypto/ux500/cryp/cryp_core.c:583:5: warning: implicit
+conversion from enumeration type 'enum dma_data_direction' to different
+enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
+ direction,
+ ^~~~~~~~~
+2 warnings generated.
+
+dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
+Because we know the value of the dma_data_direction enum from the
+switch statement, we can just use the proper value from
+dma_transfer_direction so there is no more conversion.
+
+DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
+DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2
+
+Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
+Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/crypto/ux500/cryp/cryp_core.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
+index 790f7cadc1ed..efebc484e371 100644
+--- a/drivers/crypto/ux500/cryp/cryp_core.c
++++ b/drivers/crypto/ux500/cryp/cryp_core.c
+@@ -555,7 +555,7 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
+ desc = dmaengine_prep_slave_sg(channel,
+ ctx->device->dma.sg_src,
+ ctx->device->dma.sg_src_len,
+- direction, DMA_CTRL_ACK);
++ DMA_MEM_TO_DEV, DMA_CTRL_ACK);
+ break;
+
+ case DMA_FROM_DEVICE:
+@@ -579,7 +579,7 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
+ desc = dmaengine_prep_slave_sg(channel,
+ ctx->device->dma.sg_dst,
+ ctx->device->dma.sg_dst_len,
+- direction,
++ DMA_DEV_TO_MEM,
+ DMA_CTRL_ACK |
+ DMA_PREP_INTERRUPT);
+
+--
+2.19.1
+
--- /dev/null
+From cb745985587adf82a3368e11f6d90f1d0c4941c1 Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <natechancellor@gmail.com>
+Date: Mon, 10 Dec 2018 16:49:54 -0700
+Subject: crypto: ux500 - Use proper enum in hash_set_dma_transfer
+
+[ Upstream commit 5ac93f808338f4dd465402e91869702eb87db241 ]
+
+Clang warns when one enumerated type is implicitly converted to another:
+
+drivers/crypto/ux500/hash/hash_core.c:169:4: warning: implicit
+conversion from enumeration type 'enum dma_data_direction' to different
+enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
+ direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+ ^~~~~~~~~
+1 warning generated.
+
+dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
+We know that the only direction supported by this function is
+DMA_TO_DEVICE because of the check at the top of this function so we can
+just use the equivalent value from dma_transfer_direction.
+
+DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
+
+Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
+Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/crypto/ux500/hash/hash_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
+index 9acccad26928..17c8e2b28c42 100644
+--- a/drivers/crypto/ux500/hash/hash_core.c
++++ b/drivers/crypto/ux500/hash/hash_core.c
+@@ -165,7 +165,7 @@ static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
+ __func__);
+ desc = dmaengine_prep_slave_sg(channel,
+ ctx->device->dma.sg, ctx->device->dma.sg_len,
+- direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
++ DMA_MEM_TO_DEV, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+ if (!desc) {
+ dev_err(ctx->device->dev,
+ "%s: dmaengine_prep_slave_sg() failed!\n", __func__);
+--
+2.19.1
+
--- /dev/null
+From 4dc28e08bd32a1f9d533347fd58090320fb93435 Mon Sep 17 00:00:00 2001
+From: Jia-Ju Bai <baijiaju1990@gmail.com>
+Date: Fri, 14 Dec 2018 11:55:21 +0800
+Subject: cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()
+
+[ Upstream commit 4f68ef64cd7feb1220232bd8f501d8aad340a099 ]
+
+The function cw1200_bss_info_changed() and cw1200_hw_scan() can be
+concurrently executed.
+The two functions both access a possible shared variable "frame.skb".
+
+This shared variable is freed by dev_kfree_skb() in cw1200_upload_beacon(),
+which is called by cw1200_bss_info_changed(). The free operation is
+protected by a mutex lock "priv->conf_mutex" in cw1200_bss_info_changed().
+
+In cw1200_hw_scan(), this shared variable is accessed without the
+protection of the mutex lock "priv->conf_mutex".
+Thus, concurrency use-after-free bugs may occur.
+
+To fix these bugs, the original calls to mutex_lock(&priv->conf_mutex) and
+mutex_unlock(&priv->conf_mutex) are moved to the places, which can
+protect the accesses to the shared variable.
+
+Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/wireless/st/cw1200/scan.c | 13 ++++++-------
+ 1 file changed, 6 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/net/wireless/st/cw1200/scan.c b/drivers/net/wireless/st/cw1200/scan.c
+index cc2ce60f4f09..f22c8ae15ad8 100644
+--- a/drivers/net/wireless/st/cw1200/scan.c
++++ b/drivers/net/wireless/st/cw1200/scan.c
+@@ -78,6 +78,10 @@ int cw1200_hw_scan(struct ieee80211_hw *hw,
+ if (req->n_ssids > WSM_SCAN_MAX_NUM_OF_SSIDS)
+ return -EINVAL;
+
++ /* will be unlocked in cw1200_scan_work() */
++ down(&priv->scan.lock);
++ mutex_lock(&priv->conf_mutex);
++
+ frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
+ req->ie_len);
+ if (!frame.skb)
+@@ -86,19 +90,15 @@ int cw1200_hw_scan(struct ieee80211_hw *hw,
+ if (req->ie_len)
+ skb_put_data(frame.skb, req->ie, req->ie_len);
+
+- /* will be unlocked in cw1200_scan_work() */
+- down(&priv->scan.lock);
+- mutex_lock(&priv->conf_mutex);
+-
+ ret = wsm_set_template_frame(priv, &frame);
+ if (!ret) {
+ /* Host want to be the probe responder. */
+ ret = wsm_set_probe_responder(priv, true);
+ }
+ if (ret) {
++ dev_kfree_skb(frame.skb);
+ mutex_unlock(&priv->conf_mutex);
+ up(&priv->scan.lock);
+- dev_kfree_skb(frame.skb);
+ return ret;
+ }
+
+@@ -120,10 +120,9 @@ int cw1200_hw_scan(struct ieee80211_hw *hw,
+ ++priv->scan.n_ssids;
+ }
+
+- mutex_unlock(&priv->conf_mutex);
+-
+ if (frame.skb)
+ dev_kfree_skb(frame.skb);
++ mutex_unlock(&priv->conf_mutex);
+ queue_work(priv->workqueue, &priv->scan.work);
+ return 0;
+ }
+--
+2.19.1
+
--- /dev/null
+From 51f6e15573004ce9a32edcb5f2b19fa3fba8ca8e Mon Sep 17 00:00:00 2001
+From: Bob Peterson <rpeterso@redhat.com>
+Date: Thu, 8 Nov 2018 14:04:50 -0500
+Subject: dlm: Don't swamp the CPU with callbacks queued during recovery
+
+[ Upstream commit 216f0efd19b9cc32207934fd1b87a45f2c4c593e ]
+
+Before this patch, recovery would cause all callbacks to be delayed,
+put on a queue, and afterward they were all queued to the callback
+work queue. This patch does the same thing, but occasionally takes
+a break after 25 of them so it won't swamp the CPU at the expense
+of other RT processes like corosync.
+
+Signed-off-by: Bob Peterson <rpeterso@redhat.com>
+Signed-off-by: David Teigland <teigland@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/dlm/ast.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/fs/dlm/ast.c b/fs/dlm/ast.c
+index 07fed838d8fd..15fa4239ae9f 100644
+--- a/fs/dlm/ast.c
++++ b/fs/dlm/ast.c
+@@ -290,6 +290,8 @@ void dlm_callback_suspend(struct dlm_ls *ls)
+ flush_workqueue(ls->ls_callback_wq);
+ }
+
++#define MAX_CB_QUEUE 25
++
+ void dlm_callback_resume(struct dlm_ls *ls)
+ {
+ struct dlm_lkb *lkb, *safe;
+@@ -300,15 +302,23 @@ void dlm_callback_resume(struct dlm_ls *ls)
+ if (!ls->ls_callback_wq)
+ return;
+
++more:
+ mutex_lock(&ls->ls_cb_mutex);
+ list_for_each_entry_safe(lkb, safe, &ls->ls_cb_delay, lkb_cb_list) {
+ list_del_init(&lkb->lkb_cb_list);
+ queue_work(ls->ls_callback_wq, &lkb->lkb_cb_work);
+ count++;
++ if (count == MAX_CB_QUEUE)
++ break;
+ }
+ mutex_unlock(&ls->ls_cb_mutex);
+
+ if (count)
+ log_rinfo(ls, "dlm_callback_resume %d", count);
++ if (count == MAX_CB_QUEUE) {
++ count = 0;
++ cond_resched();
++ goto more;
++ }
+ }
+
+--
+2.19.1
+
--- /dev/null
+From 4509bba0b3e37d02b3d95f569a356597907302cf Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <natechancellor@gmail.com>
+Date: Thu, 25 Oct 2018 11:05:25 -0700
+Subject: dmaengine: xilinx_dma: Remove __aligned attribute on
+ zynqmp_dma_desc_ll
+
+[ Upstream commit aeaebcc17cdf37065d2693865eeb1ff1c7dc5bf3 ]
+
+Clang warns:
+
+drivers/dma/xilinx/zynqmp_dma.c:166:4: warning: attribute 'aligned' is
+ignored, place it after "struct" to apply attribute to type declaration
+[-Wignored-attributes]
+}; __aligned(64)
+ ^
+./include/linux/compiler_types.h:200:38: note: expanded from macro
+'__aligned'
+ ^
+1 warning generated.
+
+As Nick pointed out in the previous version of this patch, the author
+likely intended for this struct to be 8-byte (64-bit) aligned, not
+64-byte, which is the default. Remove the hanging __aligned attribute.
+
+Fixes: b0cc417c1637 ("dmaengine: Add Xilinx zynqmp dma engine driver support")
+Reported-by: Nick Desaulniers <ndesaulniers@google.com>
+Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
+Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
+Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/dma/xilinx/zynqmp_dma.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
+index 5cc8ed31f26b..6d86d05e53aa 100644
+--- a/drivers/dma/xilinx/zynqmp_dma.c
++++ b/drivers/dma/xilinx/zynqmp_dma.c
+@@ -159,7 +159,7 @@ struct zynqmp_dma_desc_ll {
+ u32 ctrl;
+ u64 nxtdscraddr;
+ u64 rsvd;
+-}; __aligned(64)
++};
+
+ /**
+ * struct zynqmp_dma_desc_sw - Per Transaction structure
+--
+2.19.1
+
--- /dev/null
+From 3b1d3efb67c749e9882f7316a3b5a6f23052ae84 Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <natechancellor@gmail.com>
+Date: Thu, 20 Dec 2018 17:23:43 +0100
+Subject: drbd: Avoid Clang warning about pointless switch statment
+
+[ Upstream commit a52c5a16cf19d8a85831bb1b915a221dd4ffae3c ]
+
+There are several warnings from Clang about no case statement matching
+the constant 0:
+
+In file included from drivers/block/drbd/drbd_receiver.c:48:
+In file included from drivers/block/drbd/drbd_int.h:48:
+In file included from ./include/linux/drbd_genl_api.h:54:
+In file included from ./include/linux/genl_magic_struct.h:236:
+./include/linux/drbd_genl.h:321:1: warning: no case matching constant
+switch condition '0'
+GENL_struct(DRBD_NLA_HELPER, 24, drbd_helper_info,
+^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+./include/linux/genl_magic_struct.h:220:10: note: expanded from macro
+'GENL_struct'
+ switch (0) {
+ ^
+
+Silence this warning by adding a 'case 0:' statement. Additionally,
+adjust the alignment of the statements in the ct_assert_unique macro to
+avoid a checkpatch warning.
+
+This solution was originally sent by Arnd Bergmann with a default case
+statement: https://lore.kernel.org/patchwork/patch/756723/
+
+Link: https://github.com/ClangBuiltLinux/linux/issues/43
+Suggested-by: Lars Ellenberg <lars.ellenberg@linbit.com>
+Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/linux/genl_magic_struct.h | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/include/linux/genl_magic_struct.h b/include/linux/genl_magic_struct.h
+index 5972e4969197..eeae59d3ceb7 100644
+--- a/include/linux/genl_magic_struct.h
++++ b/include/linux/genl_magic_struct.h
+@@ -191,6 +191,7 @@ static inline void ct_assert_unique_operations(void)
+ {
+ switch (0) {
+ #include GENL_MAGIC_INCLUDE_FILE
++ case 0:
+ ;
+ }
+ }
+@@ -209,6 +210,7 @@ static inline void ct_assert_unique_top_level_attributes(void)
+ {
+ switch (0) {
+ #include GENL_MAGIC_INCLUDE_FILE
++ case 0:
+ ;
+ }
+ }
+@@ -218,7 +220,8 @@ static inline void ct_assert_unique_top_level_attributes(void)
+ static inline void ct_assert_unique_ ## s_name ## _attributes(void) \
+ { \
+ switch (0) { \
+- s_fields \
++ s_fields \
++ case 0: \
+ ; \
+ } \
+ }
+--
+2.19.1
+
--- /dev/null
+From 5b6173e03fd74344453f7f02437b14dd15afff94 Mon Sep 17 00:00:00 2001
+From: Lars Ellenberg <lars.ellenberg@linbit.com>
+Date: Thu, 20 Dec 2018 17:23:32 +0100
+Subject: drbd: disconnect, if the wrong UUIDs are attached on a connected peer
+
+[ Upstream commit b17b59602b6dcf8f97a7dc7bc489a48388d7063a ]
+
+With "on-no-data-accessible suspend-io", DRBD requires the next attach
+or connect to be to the very same data generation uuid tag it lost last.
+
+If we first lost connection to the peer,
+then later lost connection to our own disk,
+we would usually refuse to re-connect to the peer,
+because it presents the wrong data set.
+
+However, if the peer first connects without a disk,
+and then attached its disk, we accepted that same wrong data set,
+which would be "unexpected" by any user of that DRBD
+and cause "undefined results" (read: very likely data corruption).
+
+The fix is to forcefully disconnect as soon as we notice that the peer
+attached to the "wrong" dataset.
+
+Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/block/drbd/drbd_receiver.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
+index 143c5a666e25..1aad373da50e 100644
+--- a/drivers/block/drbd/drbd_receiver.c
++++ b/drivers/block/drbd/drbd_receiver.c
+@@ -4139,7 +4139,7 @@ static int receive_uuids(struct drbd_connection *connection, struct packet_info
+ kfree(device->p_uuid);
+ device->p_uuid = p_uuid;
+
+- if (device->state.conn < C_CONNECTED &&
++ if ((device->state.conn < C_CONNECTED || device->state.pdsk == D_DISKLESS) &&
+ device->state.disk < D_INCONSISTENT &&
+ device->state.role == R_PRIMARY &&
+ (device->ed_uuid & ~((u64)1)) != (p_uuid[UI_CURRENT] & ~((u64)1))) {
+--
+2.19.1
+
--- /dev/null
+From 6937040e44149f80b6a5482c9fce925356d13d20 Mon Sep 17 00:00:00 2001
+From: Roland Kammerer <roland.kammerer@linbit.com>
+Date: Thu, 20 Dec 2018 17:23:28 +0100
+Subject: drbd: narrow rcu_read_lock in drbd_sync_handshake
+
+[ Upstream commit d29e89e34952a9ad02c77109c71a80043544296e ]
+
+So far there was the possibility that we called
+genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().
+
+This included cases like:
+
+drbd_sync_handshake (acquire the RCU lock)
+ drbd_asb_recover_1p
+ drbd_khelper
+ drbd_bcast_event
+ genlmsg_new(GFP_NOIO) --> may sleep
+
+drbd_sync_handshake (acquire the RCU lock)
+ drbd_asb_recover_1p
+ drbd_khelper
+ notify_helper
+ genlmsg_new(GFP_NOIO) --> may sleep
+
+drbd_sync_handshake (acquire the RCU lock)
+ drbd_asb_recover_1p
+ drbd_khelper
+ notify_helper
+ mutex_lock --> may sleep
+
+While using GFP_ATOMIC whould have been possible in the first two cases,
+the real fix is to narrow the rcu_read_lock.
+
+Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
+Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
+Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/block/drbd/drbd_receiver.c | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
+index 796eaf347dc0..143c5a666e25 100644
+--- a/drivers/block/drbd/drbd_receiver.c
++++ b/drivers/block/drbd/drbd_receiver.c
+@@ -3361,7 +3361,7 @@ static enum drbd_conns drbd_sync_handshake(struct drbd_peer_device *peer_device,
+ enum drbd_conns rv = C_MASK;
+ enum drbd_disk_state mydisk;
+ struct net_conf *nc;
+- int hg, rule_nr, rr_conflict, tentative;
++ int hg, rule_nr, rr_conflict, tentative, always_asbp;
+
+ mydisk = device->state.disk;
+ if (mydisk == D_NEGOTIATING)
+@@ -3412,8 +3412,12 @@ static enum drbd_conns drbd_sync_handshake(struct drbd_peer_device *peer_device,
+
+ rcu_read_lock();
+ nc = rcu_dereference(peer_device->connection->net_conf);
++ always_asbp = nc->always_asbp;
++ rr_conflict = nc->rr_conflict;
++ tentative = nc->tentative;
++ rcu_read_unlock();
+
+- if (hg == 100 || (hg == -100 && nc->always_asbp)) {
++ if (hg == 100 || (hg == -100 && always_asbp)) {
+ int pcount = (device->state.role == R_PRIMARY)
+ + (peer_role == R_PRIMARY);
+ int forced = (hg == -100);
+@@ -3452,9 +3456,6 @@ static enum drbd_conns drbd_sync_handshake(struct drbd_peer_device *peer_device,
+ "Sync from %s node\n",
+ (hg < 0) ? "peer" : "this");
+ }
+- rr_conflict = nc->rr_conflict;
+- tentative = nc->tentative;
+- rcu_read_unlock();
+
+ if (hg == -100) {
+ /* FIXME this log message is not correct if we end up here
+--
+2.19.1
+
--- /dev/null
+From 03e90f29073d0f2f51e3dfb49ff0d99ea2a992ce Mon Sep 17 00:00:00 2001
+From: Lars Ellenberg <lars.ellenberg@linbit.com>
+Date: Thu, 20 Dec 2018 17:23:41 +0100
+Subject: drbd: skip spurious timeout (ping-timeo) when failing promote
+
+[ Upstream commit 9848b6ddd8c92305252f94592c5e278574e7a6ac ]
+
+If you try to promote a Secondary while connected to a Primary
+and allow-two-primaries is NOT set, we will wait for "ping-timeout"
+to give this node a chance to detect a dead primary,
+in case the cluster manager noticed faster than we did.
+
+But if we then are *still* connected to a Primary,
+we fail (after an additional timeout of ping-timout).
+
+This change skips the spurious second timeout.
+
+Most people won't notice really,
+since "ping-timeout" by default is half a second.
+
+But in some installations, ping-timeout may be 10 or 20 seconds or more,
+and spuriously delaying the error return becomes annoying.
+
+Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/block/drbd/drbd_nl.c | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
+index a12f77e6891e..ad13ec66c8e4 100644
+--- a/drivers/block/drbd/drbd_nl.c
++++ b/drivers/block/drbd/drbd_nl.c
+@@ -668,14 +668,15 @@ drbd_set_role(struct drbd_device *const device, enum drbd_role new_role, int for
+ if (rv == SS_TWO_PRIMARIES) {
+ /* Maybe the peer is detected as dead very soon...
+ retry at most once more in this case. */
+- int timeo;
+- rcu_read_lock();
+- nc = rcu_dereference(connection->net_conf);
+- timeo = nc ? (nc->ping_timeo + 1) * HZ / 10 : 1;
+- rcu_read_unlock();
+- schedule_timeout_interruptible(timeo);
+- if (try < max_tries)
++ if (try < max_tries) {
++ int timeo;
+ try = max_tries - 1;
++ rcu_read_lock();
++ nc = rcu_dereference(connection->net_conf);
++ timeo = nc ? (nc->ping_timeo + 1) * HZ / 10 : 1;
++ rcu_read_unlock();
++ schedule_timeout_interruptible(timeo);
++ }
+ continue;
+ }
+ if (rv < SS_SUCCESS) {
+--
+2.19.1
+
--- /dev/null
+From 19bb2e79deed0f9d8b2165e8a5c1dfc6fce7c72b Mon Sep 17 00:00:00 2001
+From: Alexander Duyck <alexander.h.duyck@linux.intel.com>
+Date: Wed, 28 Nov 2018 16:32:11 -0800
+Subject: driver core: Move async_synchronize_full call
+
+[ Upstream commit c37d721c68ad88925ba0e72f6e14acb829a8c6bb ]
+
+Move the async_synchronize_full call out of __device_release_driver and
+into driver_detach.
+
+The idea behind this is that the async_synchronize_full call will only
+guarantee that any existing async operations are flushed. This doesn't do
+anything to guarantee that a hotplug event that may occur while we are
+doing the release of the driver will not be asynchronously scheduled.
+
+By moving this into the driver_detach path we can avoid potential deadlocks
+as we aren't holding the device lock at this point and we should not have
+the driver we want to flush loaded so the flush will take care of any
+asynchronous events the driver we are detaching might have scheduled.
+
+Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
+Reviewed-by: Bart Van Assche <bvanassche@acm.org>
+Reviewed-by: Dan Williams <dan.j.williams@intel.com>
+Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
+Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/base/dd.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/base/dd.c b/drivers/base/dd.c
+index 55fc31f6fe7f..d928cc6d0638 100644
+--- a/drivers/base/dd.c
++++ b/drivers/base/dd.c
+@@ -813,9 +813,6 @@ static void __device_release_driver(struct device *dev, struct device *parent)
+
+ drv = dev->driver;
+ if (drv) {
+- if (driver_allows_async_probing(drv))
+- async_synchronize_full();
+-
+ while (device_links_busy(dev)) {
+ device_unlock(dev);
+ if (parent)
+@@ -920,6 +917,9 @@ void driver_detach(struct device_driver *drv)
+ struct device_private *dev_prv;
+ struct device *dev;
+
++ if (driver_allows_async_probing(drv))
++ async_synchronize_full();
++
+ for (;;) {
+ spin_lock(&drv->p->klist_devices.k_lock);
+ if (list_empty(&drv->p->klist_devices.k_list)) {
+--
+2.19.1
+
--- /dev/null
+From f1137c1a513f1a154d3f31aabbb3eb00f2b84306 Mon Sep 17 00:00:00 2001
+From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
+Date: Tue, 16 Oct 2018 11:55:49 +0200
+Subject: drm/bufs: Fix Spectre v1 vulnerability
+
+[ Upstream commit a37805098900a6e73a55b3a43b7d3bcd987bb3f4 ]
+
+idx can be indirectly controlled by user-space, hence leading to a
+potential exploitation of the Spectre variant 1 vulnerability.
+
+This issue was detected with the help of Smatch:
+
+drivers/gpu/drm/drm_bufs.c:1420 drm_legacy_freebufs() warn: potential
+spectre issue 'dma->buflist' [r] (local cap)
+
+Fix this by sanitizing idx before using it to index dma->buflist
+
+Notice that given that speculation windows are large, the policy is
+to kill the speculation on the first load and not worry if it can be
+completed with a dependent load/store [1].
+
+[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
+
+Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
+Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
+Link: https://patchwork.freedesktop.org/patch/msgid/20181016095549.GA23586@embeddedor.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/drm/drm_bufs.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
+index 1ee84dd802d4..0f05b8d8fefa 100644
+--- a/drivers/gpu/drm/drm_bufs.c
++++ b/drivers/gpu/drm/drm_bufs.c
+@@ -36,6 +36,8 @@
+ #include <drm/drmP.h>
+ #include "drm_legacy.h"
+
++#include <linux/nospec.h>
++
+ static struct drm_map_list *drm_find_matching_map(struct drm_device *dev,
+ struct drm_local_map *map)
+ {
+@@ -1417,6 +1419,7 @@ int drm_legacy_freebufs(struct drm_device *dev, void *data,
+ idx, dma->buf_count - 1);
+ return -EINVAL;
+ }
++ idx = array_index_nospec(idx, dma->buf_count);
+ buf = dma->buflist[idx];
+ if (buf->file_priv != file_priv) {
+ DRM_ERROR("Process %d freeing buffer not owned\n",
+--
+2.19.1
+
--- /dev/null
+From 354c3b5880f324651755b5c5b8c661ea5b69b536 Mon Sep 17 00:00:00 2001
+From: Sean Paul <seanpaul@chromium.org>
+Date: Thu, 29 Nov 2018 10:04:14 -0500
+Subject: drm: Clear state->acquire_ctx before leaving
+ drm_atomic_helper_commit_duplicated_state()
+
+[ Upstream commit aa394b0dd68cb00c483e151dcd84713d4d517ed1 ]
+
+drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to
+the context given in the argument and leaves it in state after it
+quits. The lifetime of state and context are not guaranteed to be the
+same, so we shouldn't leave that pointer hanging around. This patch
+resets the context to NULL to avoid any oopses.
+
+Changes in v2:
+- Added to the set
+
+Suggested-by: Daniel Vetter <daniel@ffwll.ch>
+Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
+Signed-off-by: Sean Paul <seanpaul@chromium.org>
+Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-1-sean@poorly.run
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/drm/drm_atomic_helper.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
+index 1f08d597b87a..d05ed0521e20 100644
+--- a/drivers/gpu/drm/drm_atomic_helper.c
++++ b/drivers/gpu/drm/drm_atomic_helper.c
+@@ -2899,7 +2899,7 @@ EXPORT_SYMBOL(drm_atomic_helper_suspend);
+ int drm_atomic_helper_commit_duplicated_state(struct drm_atomic_state *state,
+ struct drm_modeset_acquire_ctx *ctx)
+ {
+- int i;
++ int i, ret;
+ struct drm_plane *plane;
+ struct drm_plane_state *new_plane_state;
+ struct drm_connector *connector;
+@@ -2918,7 +2918,11 @@ int drm_atomic_helper_commit_duplicated_state(struct drm_atomic_state *state,
+ for_each_new_connector_in_state(state, connector, new_conn_state, i)
+ state->connectors[i].old_state = connector->state;
+
+- return drm_atomic_commit(state);
++ ret = drm_atomic_commit(state);
++
++ state->acquire_ctx = NULL;
++
++ return ret;
+ }
+ EXPORT_SYMBOL(drm_atomic_helper_commit_duplicated_state);
+
+--
+2.19.1
+
--- /dev/null
+From 04ca94d0e54e79d87b11480e7353661f9ed9a493 Mon Sep 17 00:00:00 2001
+From: Damian Kos <dkos@cadence.com>
+Date: Tue, 6 Nov 2018 15:37:05 +0000
+Subject: drm/rockchip: fix for mailbox read size
+
+[ Upstream commit fa68d4f8476bea4cdf441062b614b41bb85ef1da ]
+
+Some of the functions (like cdn_dp_dpcd_read, cdn_dp_get_edid_block)
+allow to read 64KiB, but the cdn_dp_mailbox_read_receive, that is
+used by them, can read only up to 255 bytes at once. Normally, it's
+not a big issue as DPCD or EDID reads won't (hopefully) exceed that
+value.
+The real issue here is the revocation list read during the HDCP
+authentication process. (problematic use case:
+https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/gpu/drm/rockchip/cdn-dp-reg.c#1152)
+The list can reach 127*5+4 bytes (num devs * 5 bytes per ID/Bksv +
+4 bytes of an additional info).
+In other words - CTSes with HDCP Repeater won't pass without this
+fix. Oh, and the driver will most likely stop working (best case
+scenario).
+
+Signed-off-by: Damian Kos <dkos@cadence.com>
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+Link: https://patchwork.freedesktop.org/patch/msgid/1541518625-25984-1-git-send-email-dkos@cadence.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/drm/rockchip/cdn-dp-reg.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/gpu/drm/rockchip/cdn-dp-reg.c b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
+index b14d211f6c21..0ed7e91471f6 100644
+--- a/drivers/gpu/drm/rockchip/cdn-dp-reg.c
++++ b/drivers/gpu/drm/rockchip/cdn-dp-reg.c
+@@ -147,7 +147,7 @@ static int cdn_dp_mailbox_validate_receive(struct cdn_dp_device *dp,
+ }
+
+ static int cdn_dp_mailbox_read_receive(struct cdn_dp_device *dp,
+- u8 *buff, u8 buff_size)
++ u8 *buff, u16 buff_size)
+ {
+ u32 i;
+ int ret;
+--
+2.19.1
+
--- /dev/null
+From 0f8eb5a0049192e8774c97759ed292080af3fee7 Mon Sep 17 00:00:00 2001
+From: Boris Brezillon <boris.brezillon@bootlin.com>
+Date: Fri, 9 Nov 2018 11:26:32 +0100
+Subject: drm/vc4: ->x_scaling[1] should never be set to VC4_SCALING_NONE
+
+[ Upstream commit 0560054da5673b25d56bea6c57c8d069673af73b ]
+
+For the YUV conversion to work properly, ->x_scaling[1] should never
+be set to VC4_SCALING_NONE, but vc4_get_scaling_mode() might return
+VC4_SCALING_NONE if the horizontal scaling ratio exactly matches the
+horizontal subsampling factor. Add a test to turn VC4_SCALING_NONE
+into VC4_SCALING_PPF when that happens.
+
+The old ->x_scaling[0] adjustment is dropped as I couldn't find any
+mention to this constraint in the spec and it's proven to be
+unnecessary (I tested various multi-planar YUV formats with scaling
+disabled, and all of them worked fine without this adjustment).
+
+Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
+Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
+Reviewed-by: Eric Anholt <eric@anholt.net>
+Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-1-boris.brezillon@bootlin.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/drm/vc4/vc4_plane.c | 12 +++++++-----
+ 1 file changed, 7 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
+index 5bd3c2ef0067..6277a3f2d5d1 100644
+--- a/drivers/gpu/drm/vc4/vc4_plane.c
++++ b/drivers/gpu/drm/vc4/vc4_plane.c
+@@ -347,12 +347,14 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
+ vc4_get_scaling_mode(vc4_state->src_h[1],
+ vc4_state->crtc_h);
+
+- /* YUV conversion requires that horizontal scaling be enabled,
+- * even on a plane that's otherwise 1:1. Looks like only PPF
+- * works in that case, so let's pick that one.
++ /* YUV conversion requires that horizontal scaling be enabled
++ * on the UV plane even if vc4_get_scaling_mode() returned
++ * VC4_SCALING_NONE (which can happen when the down-scaling
++ * ratio is 0.5). Let's force it to VC4_SCALING_PPF in this
++ * case.
+ */
+- if (vc4_state->is_unity)
+- vc4_state->x_scaling[0] = VC4_SCALING_PPF;
++ if (vc4_state->x_scaling[1] == VC4_SCALING_NONE)
++ vc4_state->x_scaling[1] = VC4_SCALING_PPF;
+ } else {
+ vc4_state->is_yuv = false;
+ vc4_state->x_scaling[1] = VC4_SCALING_NONE;
+--
+2.19.1
+
--- /dev/null
+From b87c8d65c5f6a2e9b1b9ad490fda7f55e084b5bf Mon Sep 17 00:00:00 2001
+From: Deepak Sharma <deepak.sharma@amd.com>
+Date: Tue, 23 Oct 2018 17:35:48 +0100
+Subject: drm/vgem: Fix vgem_init to get drm device available.
+
+[ Upstream commit d5c04dff24870ef07ce6453a3f4e1ffd9cf88d27 ]
+
+Modify vgem_init to take platform dev as parent in drm_dev_init.
+This will make drm device available at "/sys/devices/platform/vgem"
+in x86 chromebook.
+
+v2: rebase, address checkpatch typo and line over 80 characters
+
+Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
+Signed-off-by: Deepak Sharma <deepak.sharma@amd.com>
+Reviewed-by: Sean Paul <seanpaul@chromium.org>
+Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
+Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
+Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-1-emil.l.velikov@gmail.com
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/drm/vgem/vgem_drv.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c
+index 2524ff116f00..81c7ab10c083 100644
+--- a/drivers/gpu/drm/vgem/vgem_drv.c
++++ b/drivers/gpu/drm/vgem/vgem_drv.c
+@@ -472,31 +472,31 @@ static int __init vgem_init(void)
+ if (!vgem_device)
+ return -ENOMEM;
+
+- ret = drm_dev_init(&vgem_device->drm, &vgem_driver, NULL);
+- if (ret)
+- goto out_free;
+-
+ vgem_device->platform =
+ platform_device_register_simple("vgem", -1, NULL, 0);
+ if (IS_ERR(vgem_device->platform)) {
+ ret = PTR_ERR(vgem_device->platform);
+- goto out_fini;
++ goto out_free;
+ }
+
+ dma_coerce_mask_and_coherent(&vgem_device->platform->dev,
+ DMA_BIT_MASK(64));
++ ret = drm_dev_init(&vgem_device->drm, &vgem_driver,
++ &vgem_device->platform->dev);
++ if (ret)
++ goto out_unregister;
+
+ /* Final step: expose the device/driver to userspace */
+ ret = drm_dev_register(&vgem_device->drm, 0);
+ if (ret)
+- goto out_unregister;
++ goto out_fini;
+
+ return 0;
+
+-out_unregister:
+- platform_device_unregister(vgem_device->platform);
+ out_fini:
+ drm_dev_fini(&vgem_device->drm);
++out_unregister:
++ platform_device_unregister(vgem_device->platform);
+ out_free:
+ kfree(vgem_device);
+ return ret;
+--
+2.19.1
+
--- /dev/null
+From 9239c5fde85da3d2508b43f8e620606cfe43533f Mon Sep 17 00:00:00 2001
+From: Oleg Nesterov <oleg@redhat.com>
+Date: Thu, 3 Jan 2019 15:28:07 -0800
+Subject: exec: load_script: don't blindly truncate shebang string
+
+[ Upstream commit 8099b047ecc431518b9bb6bdbba3549bbecdc343 ]
+
+load_script() simply truncates bprm->buf and this is very wrong if the
+length of shebang string exceeds BINPRM_BUF_SIZE-2. This can silently
+truncate i_arg or (worse) we can execute the wrong binary if buf[2:126]
+happens to be the valid executable path.
+
+Change load_script() to return ENOEXEC if it can't find '\n' or zero in
+bprm->buf. Note that '\0' can come from either
+prepare_binprm()->memset() or from kernel_read(), we do not care.
+
+Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.com
+Signed-off-by: Oleg Nesterov <oleg@redhat.com>
+Acked-by: Kees Cook <keescook@chromium.org>
+Acked-by: Michal Hocko <mhocko@suse.com>
+Cc: Ben Woodard <woodard@redhat.com>
+Cc: "Eric W. Biederman" <ebiederm@xmission.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/binfmt_script.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/fs/binfmt_script.c b/fs/binfmt_script.c
+index 7cde3f46ad26..d0078cbb718b 100644
+--- a/fs/binfmt_script.c
++++ b/fs/binfmt_script.c
+@@ -42,10 +42,14 @@ static int load_script(struct linux_binprm *bprm)
+ fput(bprm->file);
+ bprm->file = NULL;
+
+- bprm->buf[BINPRM_BUF_SIZE - 1] = '\0';
+- if ((cp = strchr(bprm->buf, '\n')) == NULL)
+- cp = bprm->buf+BINPRM_BUF_SIZE-1;
++ for (cp = bprm->buf+2;; cp++) {
++ if (cp >= bprm->buf + BINPRM_BUF_SIZE)
++ return -ENOEXEC;
++ if (!*cp || (*cp == '\n'))
++ break;
++ }
+ *cp = '\0';
++
+ while (cp > bprm->buf) {
+ cp--;
+ if ((*cp == ' ') || (*cp == '\t'))
+--
+2.19.1
+
--- /dev/null
+From b6dca37ea09e8e31e204e0ebd8789802ea1708d8 Mon Sep 17 00:00:00 2001
+From: Jaegeuk Kim <jaegeuk@kernel.org>
+Date: Mon, 26 Nov 2018 14:20:32 -0800
+Subject: f2fs: avoid build warn of fall_through
+
+[ Upstream commit f5d5510e7389fa264337fb524346bac9eb93adc8 ]
+
+After merging the f2fs tree, today's linux-next build
+ (x86_64_allmodconfig) produced this warning:
+
+ In file included from fs/f2fs/dir.c:11:
+ fs/f2fs/f2fs.h: In function '__mark_inode_dirty_flag':
+ fs/f2fs/f2fs.h:2388:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
+ if (set)
+ ^
+ fs/f2fs/f2fs.h:2390:2: note: here
+ case FI_DATA_EXIST:
+ ^~~~
+
+ Exposed by my use of -Wimplicit-fallthrough
+
+Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
+Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/f2fs/f2fs.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
+index 3f1a44696036..d2873f227072 100644
+--- a/fs/f2fs/f2fs.h
++++ b/fs/f2fs/f2fs.h
+@@ -2014,6 +2014,7 @@ static inline void __mark_inode_dirty_flag(struct inode *inode,
+ case FI_INLINE_DENTRY:
+ if (set)
+ return;
++ /* fall through */
+ case FI_DATA_EXIST:
+ case FI_INLINE_DOTS:
+ f2fs_mark_inode_dirty_sync(inode, true);
+--
+2.19.1
+
--- /dev/null
+From fa6fbff6f10936ecc93a193adc181c95e2576108 Mon Sep 17 00:00:00 2001
+From: Sheng Yong <shengyong1@huawei.com>
+Date: Wed, 14 Nov 2018 19:34:28 +0800
+Subject: f2fs: fix race between write_checkpoint and write_begin
+
+[ Upstream commit 2866fb16d67992195b0526d19e65acb6640fb87f ]
+
+The following race could lead to inconsistent SIT bitmap:
+
+Task A Task B
+====== ======
+f2fs_write_checkpoint
+ block_operations
+ f2fs_lock_all
+ down_write(node_change)
+ down_write(node_write)
+ ... sync ...
+ up_write(node_change)
+ f2fs_file_write_iter
+ set_inode_flag(FI_NO_PREALLOC)
+ ......
+ f2fs_write_begin(index=0, has inline data)
+ prepare_write_begin
+ __do_map_lock(AIO) => down_read(node_change)
+ f2fs_convert_inline_page => update SIT
+ __do_map_lock(AIO) => up_read(node_change)
+ f2fs_flush_sit_entries <= inconsistent SIT
+ finish write checkpoint
+ sudden-power-off
+
+If SPO occurs after checkpoint is finished, SIT bitmap will be set
+incorrectly.
+
+Signed-off-by: Sheng Yong <shengyong1@huawei.com>
+Reviewed-by: Chao Yu <yuchao0@huawei.com>
+Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/f2fs/data.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
+index c68b319b07aa..3d37124eb63e 100644
+--- a/fs/f2fs/data.c
++++ b/fs/f2fs/data.c
+@@ -1880,6 +1880,7 @@ static int prepare_write_begin(struct f2fs_sb_info *sbi,
+ bool locked = false;
+ struct extent_info ei = {0,0,0};
+ int err = 0;
++ int flag;
+
+ /*
+ * we already allocated all the blocks, so we don't need to get
+@@ -1889,9 +1890,15 @@ static int prepare_write_begin(struct f2fs_sb_info *sbi,
+ !is_inode_flag_set(inode, FI_NO_PREALLOC))
+ return 0;
+
++ /* f2fs_lock_op avoids race between write CP and convert_inline_page */
++ if (f2fs_has_inline_data(inode) && pos + len > MAX_INLINE_DATA(inode))
++ flag = F2FS_GET_BLOCK_DEFAULT;
++ else
++ flag = F2FS_GET_BLOCK_PRE_AIO;
++
+ if (f2fs_has_inline_data(inode) ||
+ (pos & PAGE_MASK) >= i_size_read(inode)) {
+- __do_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO, true);
++ __do_map_lock(sbi, flag, true);
+ locked = true;
+ }
+ restart:
+@@ -1929,6 +1936,7 @@ restart:
+ f2fs_put_dnode(&dn);
+ __do_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO,
+ true);
++ WARN_ON(flag != F2FS_GET_BLOCK_PRE_AIO);
+ locked = true;
+ goto restart;
+ }
+@@ -1942,7 +1950,7 @@ out:
+ f2fs_put_dnode(&dn);
+ unlock_out:
+ if (locked)
+- __do_map_lock(sbi, F2FS_GET_BLOCK_PRE_AIO, false);
++ __do_map_lock(sbi, flag, false);
+ return err;
+ }
+
+--
+2.19.1
+
--- /dev/null
+From a140d6c99117e96ee6a7d7eb786f1222b234fb66 Mon Sep 17 00:00:00 2001
+From: Sahitya Tummala <stummala@codeaurora.org>
+Date: Tue, 18 Dec 2018 16:39:24 +0530
+Subject: f2fs: fix sbi->extent_list corruption issue
+
+[ Upstream commit e4589fa545e0020dbbc3c9bde35f35f949901392 ]
+
+When there is a failure in f2fs_fill_super() after/during
+the recovery of fsync'd nodes, it frees the current sbi and
+retries again. This time the mount is successful, but the files
+that got recovered before retry, still holds the extent tree,
+whose extent nodes list is corrupted since sbi and sbi->extent_list
+is freed up. The list_del corruption issue is observed when the
+file system is getting unmounted and when those recoverd files extent
+node is being freed up in the below context.
+
+list_del corruption. prev->next should be fffffff1e1ef5480, but was (null)
+<...>
+kernel BUG at kernel/msm-4.14/lib/list_debug.c:53!
+lr : __list_del_entry_valid+0x94/0xb4
+pc : __list_del_entry_valid+0x94/0xb4
+<...>
+Call trace:
+__list_del_entry_valid+0x94/0xb4
+__release_extent_node+0xb0/0x114
+__free_extent_tree+0x58/0x7c
+f2fs_shrink_extent_tree+0xdc/0x3b0
+f2fs_leave_shrinker+0x28/0x7c
+f2fs_put_super+0xfc/0x1e0
+generic_shutdown_super+0x70/0xf4
+kill_block_super+0x2c/0x5c
+kill_f2fs_super+0x44/0x50
+deactivate_locked_super+0x60/0x8c
+deactivate_super+0x68/0x74
+cleanup_mnt+0x40/0x78
+__cleanup_mnt+0x1c/0x28
+task_work_run+0x48/0xd0
+do_notify_resume+0x678/0xe98
+work_pending+0x8/0x14
+
+Fix this by not creating extents for those recovered files if shrinker is
+not registered yet. Once mount is successful and shrinker is registered,
+those files can have extents again.
+
+Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
+Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/f2fs/f2fs.h | 11 ++++++++++-
+ fs/f2fs/shrinker.c | 2 +-
+ 2 files changed, 11 insertions(+), 2 deletions(-)
+
+diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
+index d2873f227072..64760314c5f2 100644
+--- a/fs/f2fs/f2fs.h
++++ b/fs/f2fs/f2fs.h
+@@ -2295,10 +2295,19 @@ static inline bool is_dot_dotdot(const struct qstr *str)
+
+ static inline bool f2fs_may_extent_tree(struct inode *inode)
+ {
+- if (!test_opt(F2FS_I_SB(inode), EXTENT_CACHE) ||
++ struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
++
++ if (!test_opt(sbi, EXTENT_CACHE) ||
+ is_inode_flag_set(inode, FI_NO_EXTENT))
+ return false;
+
++ /*
++ * for recovered files during mount do not create extents
++ * if shrinker is not registered.
++ */
++ if (list_empty(&sbi->s_list))
++ return false;
++
+ return S_ISREG(inode->i_mode);
+ }
+
+diff --git a/fs/f2fs/shrinker.c b/fs/f2fs/shrinker.c
+index 5c60fc28ec75..ec71d2e29a15 100644
+--- a/fs/f2fs/shrinker.c
++++ b/fs/f2fs/shrinker.c
+@@ -138,6 +138,6 @@ void f2fs_leave_shrinker(struct f2fs_sb_info *sbi)
+ f2fs_shrink_extent_tree(sbi, __count_extent_cache(sbi));
+
+ spin_lock(&f2fs_list_lock);
+- list_del(&sbi->s_list);
++ list_del_init(&sbi->s_list);
+ spin_unlock(&f2fs_list_lock);
+ }
+--
+2.19.1
+
--- /dev/null
+From 04bfa658890214e1d24cda37e3f417b569a75f81 Mon Sep 17 00:00:00 2001
+From: Tiezhu Yang <kernelpatch@126.com>
+Date: Wed, 21 Nov 2018 07:21:38 +0800
+Subject: f2fs: fix wrong return value of f2fs_acl_create
+
+[ Upstream commit f6176473a0c7472380eef72ebeb330cf9485bf0a ]
+
+When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create()
+should return -EIO instead of -ENOMEM, this patch makes it consistent
+with posix_acl_create() which has been fixed in commit beaf226b863a
+("posix_acl: don't ignore return value of posix_acl_create_masq()").
+
+Fixes: 83dfe53c185e ("f2fs: fix reference leaks in f2fs_acl_create")
+Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
+Reviewed-by: Chao Yu <yuchao0@huawei.com>
+Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/f2fs/acl.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+diff --git a/fs/f2fs/acl.c b/fs/f2fs/acl.c
+index 436b3a1464d9..5e4860b8bbfc 100644
+--- a/fs/f2fs/acl.c
++++ b/fs/f2fs/acl.c
+@@ -349,12 +349,14 @@ static int f2fs_acl_create(struct inode *dir, umode_t *mode,
+ return PTR_ERR(p);
+
+ clone = f2fs_acl_clone(p, GFP_NOFS);
+- if (!clone)
+- goto no_mem;
++ if (!clone) {
++ ret = -ENOMEM;
++ goto release_acl;
++ }
+
+ ret = f2fs_acl_create_masq(clone, mode);
+ if (ret < 0)
+- goto no_mem_clone;
++ goto release_clone;
+
+ if (ret == 0)
+ posix_acl_release(clone);
+@@ -368,11 +370,11 @@ static int f2fs_acl_create(struct inode *dir, umode_t *mode,
+
+ return 0;
+
+-no_mem_clone:
++release_clone:
+ posix_acl_release(clone);
+-no_mem:
++release_acl:
+ posix_acl_release(p);
+- return -ENOMEM;
++ return ret;
+ }
+
+ int f2fs_init_acl(struct inode *inode, struct inode *dir, struct page *ipage,
+--
+2.19.1
+
--- /dev/null
+From 5641cdf29b90a83166aab8bc4f97b39df59d9359 Mon Sep 17 00:00:00 2001
+From: Yunlei He <heyunlei@huawei.com>
+Date: Tue, 6 Nov 2018 10:25:29 +0800
+Subject: f2fs: move dir data flush to write checkpoint process
+
+[ Upstream commit b61ac5b720146c619c7cdf17eff2551b934399e5 ]
+
+This patch move dir data flush to write checkpoint process, by
+doing this, it may reduce some time for dir fsync.
+
+pre:
+ -f2fs_do_sync_file enter
+ -file_write_and_wait_range <- flush & wait
+ -write_checkpoint
+ -do_checkpoint <- wait all
+ -f2fs_do_sync_file exit
+
+now:
+ -f2fs_do_sync_file enter
+ -write_checkpoint
+ -block_operations <- flush dir & no wait
+ -do_checkpoint <- wait all
+ -f2fs_do_sync_file exit
+
+Signed-off-by: Yunlei He <heyunlei@huawei.com>
+Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/f2fs/file.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
+index 7d3189f1941c..5f549bc4e097 100644
+--- a/fs/f2fs/file.c
++++ b/fs/f2fs/file.c
+@@ -205,6 +205,9 @@ static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
+
+ trace_f2fs_sync_file_enter(inode);
+
++ if (S_ISDIR(inode->i_mode))
++ goto go_write;
++
+ /* if fdatasync is triggered, let's do in-place-update */
+ if (datasync || get_dirty_pages(inode) <= SM_I(sbi)->min_fsync_blocks)
+ set_inode_flag(inode, FI_NEED_IPU);
+--
+2.19.1
+
--- /dev/null
+From f4743b18960b7d18384be7e2c55d439b6189407f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
+Date: Thu, 20 Dec 2018 19:13:09 +0100
+Subject: fbdev: fbcon: Fix unregister crash when more than one framebuffer
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 2122b40580dd9d0620398739c773d07a7b7939d0 ]
+
+When unregistering fbdev using unregister_framebuffer(), any bound
+console will unbind automatically. This is working fine if this is the
+only framebuffer, resulting in a switch to the dummy console. However if
+there is a fb0 and I unregister fb1 having a bound console, I eventually
+get a crash. The fastest way for me to trigger the crash is to do a
+reboot, resulting in this splat:
+
+[ 76.478825] WARNING: CPU: 0 PID: 527 at linux/kernel/workqueue.c:1442 __queue_work+0x2d4/0x41c
+[ 76.478849] Modules linked in: raspberrypi_hwmon gpio_backlight backlight bcm2835_rng rng_core [last unloaded: tinydrm]
+[ 76.478916] CPU: 0 PID: 527 Comm: systemd-udevd Not tainted 4.20.0-rc4+ #4
+[ 76.478933] Hardware name: BCM2835
+[ 76.478949] Backtrace:
+[ 76.478995] [<c010d388>] (dump_backtrace) from [<c010d670>] (show_stack+0x20/0x24)
+[ 76.479022] r6:00000000 r5:c0bc73be r4:00000000 r3:6fb5bf81
+[ 76.479060] [<c010d650>] (show_stack) from [<c08e82f4>] (dump_stack+0x20/0x28)
+[ 76.479102] [<c08e82d4>] (dump_stack) from [<c0120070>] (__warn+0xec/0x12c)
+[ 76.479134] [<c011ff84>] (__warn) from [<c01201e4>] (warn_slowpath_null+0x4c/0x58)
+[ 76.479165] r9:c0eb6944 r8:00000001 r7:c0e927f8 r6:c0bc73be r5:000005a2 r4:c0139e84
+[ 76.479197] [<c0120198>] (warn_slowpath_null) from [<c0139e84>] (__queue_work+0x2d4/0x41c)
+[ 76.479222] r6:d7666a00 r5:c0e918ee r4:dbc4e700
+[ 76.479251] [<c0139bb0>] (__queue_work) from [<c013a02c>] (queue_work_on+0x60/0x88)
+[ 76.479281] r10:c0496bf8 r9:00000100 r8:c0e92ae0 r7:00000001 r6:d9403700 r5:d7666a00
+[ 76.479298] r4:20000113
+[ 76.479348] [<c0139fcc>] (queue_work_on) from [<c0496c28>] (cursor_timer_handler+0x30/0x54)
+[ 76.479374] r7:d8a8fabc r6:c0e08088 r5:d8afdc5c r4:d8a8fabc
+[ 76.479413] [<c0496bf8>] (cursor_timer_handler) from [<c0178744>] (call_timer_fn+0x100/0x230)
+[ 76.479435] r4:c0e9192f r3:d758a340
+[ 76.479465] [<c0178644>] (call_timer_fn) from [<c0178980>] (expire_timers+0x10c/0x12c)
+[ 76.479495] r10:40000000 r9:c0e9192f r8:c0e92ae0 r7:d8afdccc r6:c0e19280 r5:c0496bf8
+[ 76.479513] r4:d8a8fabc
+[ 76.479541] [<c0178874>] (expire_timers) from [<c0179630>] (run_timer_softirq+0xa8/0x184)
+[ 76.479570] r9:00000001 r8:c0e19280 r7:00000000 r6:c0e08088 r5:c0e1a3e0 r4:c0e19280
+[ 76.479603] [<c0179588>] (run_timer_softirq) from [<c0102404>] (__do_softirq+0x1ac/0x3fc)
+[ 76.479632] r10:c0e91680 r9:d8afc020 r8:0000000a r7:00000100 r6:00000001 r5:00000002
+[ 76.479650] r4:c0eb65ec
+[ 76.479686] [<c0102258>] (__do_softirq) from [<c0124d10>] (irq_exit+0xe8/0x168)
+[ 76.479716] r10:d8d1a9b0 r9:d8afc000 r8:00000001 r7:d949c000 r6:00000000 r5:c0e8b3f0
+[ 76.479734] r4:00000000
+[ 76.479764] [<c0124c28>] (irq_exit) from [<c016b72c>] (__handle_domain_irq+0x94/0xb0)
+[ 76.479793] [<c016b698>] (__handle_domain_irq) from [<c01021dc>] (bcm2835_handle_irq+0x3c/0x48)
+[ 76.479823] r8:d8afdebc r7:d8afddfc r6:ffffffff r5:c0e089f8 r4:d8afddc8 r3:d8afddc8
+[ 76.479851] [<c01021a0>] (bcm2835_handle_irq) from [<c01019f0>] (__irq_svc+0x70/0x98)
+
+The problem is in the console rebinding in fbcon_fb_unbind(). It uses the
+virtual console index as the new framebuffer index to bind the console(s)
+to. The correct way is to use the con2fb_map lookup table to find the
+framebuffer index.
+
+Fixes: cfafca8067c6 ("fbdev: fbcon: console unregistration from unregister_framebuffer")
+Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
+Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
+Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
+Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/video/fbdev/core/fbcon.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
+index 04612f938bab..85787119bfbf 100644
+--- a/drivers/video/fbdev/core/fbcon.c
++++ b/drivers/video/fbdev/core/fbcon.c
+@@ -3041,7 +3041,7 @@ static int fbcon_fb_unbind(int idx)
+ for (i = first_fb_vc; i <= last_fb_vc; i++) {
+ if (con2fb_map[i] != idx &&
+ con2fb_map[i] != -1) {
+- new_idx = i;
++ new_idx = con2fb_map[i];
+ break;
+ }
+ }
+--
+2.19.1
+
--- /dev/null
+From b73f4c52a9f99d9f903db37ecf4191d9353d4210 Mon Sep 17 00:00:00 2001
+From: Peter Rosin <peda@axentia.se>
+Date: Thu, 20 Dec 2018 19:13:07 +0100
+Subject: fbdev: fbmem: behave better with small rotated displays and many CPUs
+
+[ Upstream commit f75df8d4b4fabfad7e3cba2debfad12741c6fde7 ]
+
+Blitting an image with "negative" offsets is not working since there
+is no clipping. It hopefully just crashes. For the bootup logo, there
+is protection so that blitting does not happen as the image is drawn
+further and further to the right (ROTATE_UR) or further and further
+down (ROTATE_CW). There is however no protection when drawing in the
+opposite directions (ROTATE_UD and ROTATE_CCW).
+
+Add back this protection.
+
+The regression is 20-odd years old but the mindless warning-killing
+mentality displayed in commit 34bdb666f4b2 ("fbdev: fbmem: remove
+positive test on unsigned values") is also to blame, methinks.
+
+Fixes: 448d479747b8 ("fbdev: fb_do_show_logo() updates")
+Signed-off-by: Peter Rosin <peda@axentia.se>
+Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
+Cc: Fabian Frederick <ffrederick@users.sourceforge.net>
+Cc: Geert Uytterhoeven <geert+renesas@glider.be>
+cc: Geoff Levand <geoff@infradead.org>
+Cc: James Simmons <jsimmons@users.sf.net>
+Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/video/fbdev/core/fbmem.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
+index 11d73b5fc885..302cce7185e3 100644
+--- a/drivers/video/fbdev/core/fbmem.c
++++ b/drivers/video/fbdev/core/fbmem.c
+@@ -435,7 +435,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
+ image->dx += image->width + 8;
+ }
+ } else if (rotate == FB_ROTATE_UD) {
+- for (x = 0; x < num; x++) {
++ u32 dx = image->dx;
++
++ for (x = 0; x < num && image->dx <= dx; x++) {
+ info->fbops->fb_imageblit(info, image);
+ image->dx -= image->width + 8;
+ }
+@@ -447,7 +449,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
+ image->dy += image->height + 8;
+ }
+ } else if (rotate == FB_ROTATE_CCW) {
+- for (x = 0; x < num; x++) {
++ u32 dy = image->dy;
++
++ for (x = 0; x < num && image->dy <= dy; x++) {
+ info->fbops->fb_imageblit(info, image);
+ image->dy -= image->height + 8;
+ }
+--
+2.19.1
+
--- /dev/null
+From f94593e62066f3ea5cc6f1835f82da910a508f32 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 29 Nov 2018 18:12:27 +0100
+Subject: firmware/efi: Add NULL pointer checks in efivars API functions
+
+[ Upstream commit ab2180a15ce54739fed381efb4cb12e78dfb1561 ]
+
+Since commit:
+
+ ce2e6db554fa ("brcmfmac: Add support for getting nvram contents from EFI variables")
+
+we have a device driver accessing the efivars API. Several functions in
+the efivars API assume __efivars is set, i.e., that they will be accessed
+only after efivars_register() has been called. However, the following NULL
+pointer access was reported calling efivar_entry_size() from the brcmfmac
+device driver:
+
+ Unable to handle kernel NULL pointer dereference at virtual address 00000008
+ pgd = 60bfa5f1
+ [00000008] *pgd=00000000
+ Internal error: Oops: 5 [#1] SMP ARM
+ ...
+ Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+ Workqueue: events request_firmware_work_func
+ PC is at efivar_entry_size+0x28/0x90
+ LR is at brcmf_fw_complete_request+0x3f8/0x8d4 [brcmfmac]
+ pc : [<c0c40718>] lr : [<bf2a3ef4>] psr: a00d0113
+ sp : ede7fe28 ip : ee983410 fp : c1787f30
+ r10: 00000000 r9 : 00000000 r8 : bf2b2258
+ r7 : ee983000 r6 : c1604c48 r5 : ede7fe88 r4 : edf337c0
+ r3 : 00000000 r2 : 00000000 r1 : ede7fe88 r0 : c17712c8
+ Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
+ Control: 10c5387d Table: ad16804a DAC: 00000051
+
+Disassembly showed that the local static variable __efivars is NULL,
+which is not entirely unexpected given that it is a non-EFI platform.
+
+So add a NULL pointer check to efivar_entry_size(), and to related
+functions while at it. In efivars_register() a couple of sanity checks
+are added as well.
+
+Reported-by: Jon Hunter <jonathanh@nvidia.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
+Cc: Andy Lutomirski <luto@kernel.org>
+Cc: Bhupesh Sharma <bhsharma@redhat.com>
+Cc: Borislav Petkov <bp@alien8.de>
+Cc: Dave Hansen <dave.hansen@intel.com>
+Cc: Eric Snowberg <eric.snowberg@oracle.com>
+Cc: Hans de Goede <hdegoede@redhat.com>
+Cc: Joe Perches <joe@perches.com>
+Cc: Julien Thierry <julien.thierry@arm.com>
+Cc: Linus Torvalds <torvalds@linux-foundation.org>
+Cc: Marc Zyngier <marc.zyngier@arm.com>
+Cc: Matt Fleming <matt@codeblueprint.co.uk>
+Cc: Nathan Chancellor <natechancellor@gmail.com>
+Cc: Peter Zijlstra <peterz@infradead.org>
+Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
+Cc: Sedat Dilek <sedat.dilek@gmail.com>
+Cc: Thomas Gleixner <tglx@linutronix.de>
+Cc: YiFei Zhu <zhuyifei1999@gmail.com>
+Cc: linux-efi@vger.kernel.org
+Link: http://lkml.kernel.org/r/20181129171230.18699-9-ard.biesheuvel@linaro.org
+Signed-off-by: Ingo Molnar <mingo@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/firmware/efi/vars.c | 99 +++++++++++++++++++++++++++++--------
+ 1 file changed, 78 insertions(+), 21 deletions(-)
+
+diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
+index 9336ffdf6e2c..fceaafd67ec6 100644
+--- a/drivers/firmware/efi/vars.c
++++ b/drivers/firmware/efi/vars.c
+@@ -318,7 +318,12 @@ EXPORT_SYMBOL_GPL(efivar_variable_is_removable);
+ static efi_status_t
+ check_var_size(u32 attributes, unsigned long size)
+ {
+- const struct efivar_operations *fops = __efivars->ops;
++ const struct efivar_operations *fops;
++
++ if (!__efivars)
++ return EFI_UNSUPPORTED;
++
++ fops = __efivars->ops;
+
+ if (!fops->query_variable_store)
+ return EFI_UNSUPPORTED;
+@@ -329,7 +334,12 @@ check_var_size(u32 attributes, unsigned long size)
+ static efi_status_t
+ check_var_size_nonblocking(u32 attributes, unsigned long size)
+ {
+- const struct efivar_operations *fops = __efivars->ops;
++ const struct efivar_operations *fops;
++
++ if (!__efivars)
++ return EFI_UNSUPPORTED;
++
++ fops = __efivars->ops;
+
+ if (!fops->query_variable_store)
+ return EFI_UNSUPPORTED;
+@@ -429,13 +439,18 @@ static void dup_variable_bug(efi_char16_t *str16, efi_guid_t *vendor_guid,
+ int efivar_init(int (*func)(efi_char16_t *, efi_guid_t, unsigned long, void *),
+ void *data, bool duplicates, struct list_head *head)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
++ const struct efivar_operations *ops;
+ unsigned long variable_name_size = 1024;
+ efi_char16_t *variable_name;
+ efi_status_t status;
+ efi_guid_t vendor_guid;
+ int err = 0;
+
++ if (!__efivars)
++ return -EFAULT;
++
++ ops = __efivars->ops;
++
+ variable_name = kzalloc(variable_name_size, GFP_KERNEL);
+ if (!variable_name) {
+ printk(KERN_ERR "efivars: Memory allocation failed.\n");
+@@ -583,12 +598,14 @@ static void efivar_entry_list_del_unlock(struct efivar_entry *entry)
+ */
+ int __efivar_entry_delete(struct efivar_entry *entry)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
+ efi_status_t status;
+
+- status = ops->set_variable(entry->var.VariableName,
+- &entry->var.VendorGuid,
+- 0, 0, NULL);
++ if (!__efivars)
++ return -EINVAL;
++
++ status = __efivars->ops->set_variable(entry->var.VariableName,
++ &entry->var.VendorGuid,
++ 0, 0, NULL);
+
+ return efi_status_to_err(status);
+ }
+@@ -607,12 +624,17 @@ EXPORT_SYMBOL_GPL(__efivar_entry_delete);
+ */
+ int efivar_entry_delete(struct efivar_entry *entry)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
++ const struct efivar_operations *ops;
+ efi_status_t status;
+
+ if (down_interruptible(&efivars_lock))
+ return -EINTR;
+
++ if (!__efivars) {
++ up(&efivars_lock);
++ return -EINVAL;
++ }
++ ops = __efivars->ops;
+ status = ops->set_variable(entry->var.VariableName,
+ &entry->var.VendorGuid,
+ 0, 0, NULL);
+@@ -650,13 +672,19 @@ EXPORT_SYMBOL_GPL(efivar_entry_delete);
+ int efivar_entry_set(struct efivar_entry *entry, u32 attributes,
+ unsigned long size, void *data, struct list_head *head)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
++ const struct efivar_operations *ops;
+ efi_status_t status;
+ efi_char16_t *name = entry->var.VariableName;
+ efi_guid_t vendor = entry->var.VendorGuid;
+
+ if (down_interruptible(&efivars_lock))
+ return -EINTR;
++
++ if (!__efivars) {
++ up(&efivars_lock);
++ return -EINVAL;
++ }
++ ops = __efivars->ops;
+ if (head && efivar_entry_find(name, vendor, head, false)) {
+ up(&efivars_lock);
+ return -EEXIST;
+@@ -687,12 +715,17 @@ static int
+ efivar_entry_set_nonblocking(efi_char16_t *name, efi_guid_t vendor,
+ u32 attributes, unsigned long size, void *data)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
++ const struct efivar_operations *ops;
+ efi_status_t status;
+
+ if (down_trylock(&efivars_lock))
+ return -EBUSY;
+
++ if (!__efivars) {
++ up(&efivars_lock);
++ return -EINVAL;
++ }
++
+ status = check_var_size_nonblocking(attributes,
+ size + ucs2_strsize(name, 1024));
+ if (status != EFI_SUCCESS) {
+@@ -700,6 +733,7 @@ efivar_entry_set_nonblocking(efi_char16_t *name, efi_guid_t vendor,
+ return -ENOSPC;
+ }
+
++ ops = __efivars->ops;
+ status = ops->set_variable_nonblocking(name, &vendor, attributes,
+ size, data);
+
+@@ -727,9 +761,13 @@ efivar_entry_set_nonblocking(efi_char16_t *name, efi_guid_t vendor,
+ int efivar_entry_set_safe(efi_char16_t *name, efi_guid_t vendor, u32 attributes,
+ bool block, unsigned long size, void *data)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
++ const struct efivar_operations *ops;
+ efi_status_t status;
+
++ if (!__efivars)
++ return -EINVAL;
++
++ ops = __efivars->ops;
+ if (!ops->query_variable_store)
+ return -ENOSYS;
+
+@@ -829,13 +867,18 @@ EXPORT_SYMBOL_GPL(efivar_entry_find);
+ */
+ int efivar_entry_size(struct efivar_entry *entry, unsigned long *size)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
++ const struct efivar_operations *ops;
+ efi_status_t status;
+
+ *size = 0;
+
+ if (down_interruptible(&efivars_lock))
+ return -EINTR;
++ if (!__efivars) {
++ up(&efivars_lock);
++ return -EINVAL;
++ }
++ ops = __efivars->ops;
+ status = ops->get_variable(entry->var.VariableName,
+ &entry->var.VendorGuid, NULL, size, NULL);
+ up(&efivars_lock);
+@@ -861,12 +904,14 @@ EXPORT_SYMBOL_GPL(efivar_entry_size);
+ int __efivar_entry_get(struct efivar_entry *entry, u32 *attributes,
+ unsigned long *size, void *data)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
+ efi_status_t status;
+
+- status = ops->get_variable(entry->var.VariableName,
+- &entry->var.VendorGuid,
+- attributes, size, data);
++ if (!__efivars)
++ return -EINVAL;
++
++ status = __efivars->ops->get_variable(entry->var.VariableName,
++ &entry->var.VendorGuid,
++ attributes, size, data);
+
+ return efi_status_to_err(status);
+ }
+@@ -882,14 +927,19 @@ EXPORT_SYMBOL_GPL(__efivar_entry_get);
+ int efivar_entry_get(struct efivar_entry *entry, u32 *attributes,
+ unsigned long *size, void *data)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
+ efi_status_t status;
+
+ if (down_interruptible(&efivars_lock))
+ return -EINTR;
+- status = ops->get_variable(entry->var.VariableName,
+- &entry->var.VendorGuid,
+- attributes, size, data);
++
++ if (!__efivars) {
++ up(&efivars_lock);
++ return -EINVAL;
++ }
++
++ status = __efivars->ops->get_variable(entry->var.VariableName,
++ &entry->var.VendorGuid,
++ attributes, size, data);
+ up(&efivars_lock);
+
+ return efi_status_to_err(status);
+@@ -921,7 +971,7 @@ EXPORT_SYMBOL_GPL(efivar_entry_get);
+ int efivar_entry_set_get_size(struct efivar_entry *entry, u32 attributes,
+ unsigned long *size, void *data, bool *set)
+ {
+- const struct efivar_operations *ops = __efivars->ops;
++ const struct efivar_operations *ops;
+ efi_char16_t *name = entry->var.VariableName;
+ efi_guid_t *vendor = &entry->var.VendorGuid;
+ efi_status_t status;
+@@ -940,6 +990,11 @@ int efivar_entry_set_get_size(struct efivar_entry *entry, u32 attributes,
+ if (down_interruptible(&efivars_lock))
+ return -EINTR;
+
++ if (!__efivars) {
++ err = -EINVAL;
++ goto out;
++ }
++
+ /*
+ * Ensure that the available space hasn't shrunk below the safe level
+ */
+@@ -956,6 +1011,8 @@ int efivar_entry_set_get_size(struct efivar_entry *entry, u32 attributes,
+ }
+ }
+
++ ops = __efivars->ops;
++
+ status = ops->set_variable(name, vendor, attributes, *size, data);
+ if (status != EFI_SUCCESS) {
+ err = efi_status_to_err(status);
+--
+2.19.1
+
--- /dev/null
+From 0a22d0cb5eda62dbabfe71b4d390d64ffd90ea5b Mon Sep 17 00:00:00 2001
+From: Andreas Puhm <puhm@oregano.at>
+Date: Wed, 7 Nov 2018 11:51:47 -0600
+Subject: fpga: altera-cvp: Fix registration for CvP incapable devices
+
+[ Upstream commit 68f60538daa4bc3da5d0764d46f391916fba20fd ]
+
+The probe function needs to verify the CvP enable bit in order to
+properly determine if FPGA Manager functionality can be safely
+enabled.
+
+Fixes: 34d1dc17ce97 ("fpga manager: Add Altera CvP driver")
+Signed-off-by: Andreas Puhm <puhm@oregano.at>
+Signed-off-by: Anatolij Gustschin <agust@denx.de>
+Reviewed-by: Moritz Fischer <mdf@kernel.org>
+Acked-by: Alan Tull <atull@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/fpga/altera-cvp.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
+index 00e73d28077c..b7558acd1a66 100644
+--- a/drivers/fpga/altera-cvp.c
++++ b/drivers/fpga/altera-cvp.c
+@@ -404,6 +404,7 @@ static int altera_cvp_probe(struct pci_dev *pdev,
+ {
+ struct altera_cvp_conf *conf;
+ u16 cmd, val;
++ u32 regval;
+ int ret;
+
+ /*
+@@ -417,6 +418,14 @@ static int altera_cvp_probe(struct pci_dev *pdev,
+ return -ENODEV;
+ }
+
++ pci_read_config_dword(pdev, VSE_CVP_STATUS, ®val);
++ if (!(regval & VSE_CVP_STATUS_CVP_EN)) {
++ dev_err(&pdev->dev,
++ "CVP is disabled for this device: CVP_STATUS Reg 0x%x\n",
++ regval);
++ return -ENODEV;
++ }
++
+ conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
+ if (!conf)
+ return -ENOMEM;
+--
+2.19.1
+
--- /dev/null
+From 0e3dc1c8f7263356c1114ddd9571709d003b31b8 Mon Sep 17 00:00:00 2001
+From: Davidlohr Bueso <dave@stgolabs.net>
+Date: Thu, 3 Jan 2019 15:27:09 -0800
+Subject: fs/epoll: drop ovflist branch prediction
+
+[ Upstream commit 76699a67f3041ff4c7af6d6ee9be2bfbf1ffb671 ]
+
+The ep->ovflist is a secondary ready-list to temporarily store events
+that might occur when doing sproc without holding the ep->wq.lock. This
+accounts for every time we check for ready events and also send events
+back to userspace; both callbacks, particularly the latter because of
+copy_to_user, can account for a non-trivial time.
+
+As such, the unlikely() check to see if the pointer is being used, seems
+both misleading and sub-optimal. In fact, we go to an awful lot of
+trouble to sync both lists, and populating the ovflist is far from an
+uncommon scenario.
+
+For example, profiling a concurrent epoll_wait(2) benchmark, with
+CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33%
+incorrect rate was seen; and when incrementally increasing the number of
+epoll instances (which is used, for example for multiple queuing load
+balancing models), up to a 90% incorrect rate was seen.
+
+Similarly, by deleting the prediction, 3% throughput boost was seen
+across incremental threads.
+
+Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net
+Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
+Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
+Cc: Al Viro <viro@zeniv.linux.org.uk>
+Cc: Jason Baron <jbaron@akamai.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/eventpoll.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/fs/eventpoll.c b/fs/eventpoll.c
+index 2fabd19cdeea..c291bf61afb9 100644
+--- a/fs/eventpoll.c
++++ b/fs/eventpoll.c
+@@ -1167,7 +1167,7 @@ static int ep_poll_callback(wait_queue_entry_t *wait, unsigned mode, int sync, v
+ * semantics). All the events that happen during that period of time are
+ * chained in ep->ovflist and requeued later on.
+ */
+- if (unlikely(ep->ovflist != EP_UNACTIVE_PTR)) {
++ if (ep->ovflist != EP_UNACTIVE_PTR) {
+ if (epi->next == EP_UNACTIVE_PTR) {
+ epi->next = ep->ovflist;
+ ep->ovflist = epi;
+--
+2.19.1
+
--- /dev/null
+From 4a43f992c7ec4eaadf1b36b1614c5e1c3f3841e1 Mon Sep 17 00:00:00 2001
+From: Benjamin Gordon <bmgordon@google.com>
+Date: Thu, 3 Jan 2019 15:25:56 -0800
+Subject: fs/proc/base.c: use ns_capable instead of capable for timerslack_ns
+
+[ Upstream commit 8da0b4f692c6d90b09c91f271517db746a22ff67 ]
+
+Access to timerslack_ns is controlled by a process having CAP_SYS_NICE
+in its effective capability set, but the current check looks in the root
+namespace instead of the process' user namespace. Since a process is
+allowed to do other activities controlled by CAP_SYS_NICE inside a
+namespace, it should also be able to adjust timerslack_ns.
+
+Link: http://lkml.kernel.org/r/20181030180012.232896-1-bmgordon@google.com
+Signed-off-by: Benjamin Gordon <bmgordon@google.com>
+Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
+Cc: John Stultz <john.stultz@linaro.org>
+Cc: "Eric W. Biederman" <ebiederm@xmission.com>
+Cc: Kees Cook <keescook@chromium.org>
+Cc: "Serge E. Hallyn" <serge@hallyn.com>
+Cc: Thomas Gleixner <tglx@linutronix.de>
+Cc: Arjan van de Ven <arjan@linux.intel.com>
+Cc: Oren Laadan <orenl@cellrox.com>
+Cc: Ruchi Kandoi <kandoiruchi@google.com>
+Cc: Rom Lemarchand <romlem@android.com>
+Cc: Todd Kjos <tkjos@google.com>
+Cc: Colin Cross <ccross@android.com>
+Cc: Nick Kralevich <nnk@google.com>
+Cc: Dmitry Shmidt <dimitrysh@google.com>
+Cc: Elliott Hughes <enh@google.com>
+Cc: Alexey Dobriyan <adobriyan@gmail.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/proc/base.c | 12 +++++++++---
+ 1 file changed, 9 insertions(+), 3 deletions(-)
+
+diff --git a/fs/proc/base.c b/fs/proc/base.c
+index 9063738ff1f0..e26155a97afa 100644
+--- a/fs/proc/base.c
++++ b/fs/proc/base.c
+@@ -2374,10 +2374,13 @@ static ssize_t timerslack_ns_write(struct file *file, const char __user *buf,
+ return -ESRCH;
+
+ if (p != current) {
+- if (!capable(CAP_SYS_NICE)) {
++ rcu_read_lock();
++ if (!ns_capable(__task_cred(p)->user_ns, CAP_SYS_NICE)) {
++ rcu_read_unlock();
+ count = -EPERM;
+ goto out;
+ }
++ rcu_read_unlock();
+
+ err = security_task_setscheduler(p);
+ if (err) {
+@@ -2410,11 +2413,14 @@ static int timerslack_ns_show(struct seq_file *m, void *v)
+ return -ESRCH;
+
+ if (p != current) {
+-
+- if (!capable(CAP_SYS_NICE)) {
++ rcu_read_lock();
++ if (!ns_capable(__task_cred(p)->user_ns, CAP_SYS_NICE)) {
++ rcu_read_unlock();
+ err = -EPERM;
+ goto out;
+ }
++ rcu_read_unlock();
++
+ err = security_task_getscheduler(p);
+ if (err)
+ goto out;
+--
+2.19.1
+
--- /dev/null
+From c3b32510499a1bea73757fb85abac5edcd644144 Mon Sep 17 00:00:00 2001
+From: Scott Wood <oss@buserror.net>
+Date: Thu, 27 Dec 2018 18:29:09 -0600
+Subject: fsl/fman: Use GFP_ATOMIC in {memac,tgec}_add_hash_mac_address()
+
+[ Upstream commit 0d9c9a238faf925823bde866182c663b6d734f2e ]
+
+These functions are called from atomic context:
+
+[ 9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421
+[ 9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip
+[ 9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876f324 #29
+[ 9.163130] Call Trace:
+[ 9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable)
+[ 9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164
+[ 9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c
+[ 9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198
+[ 9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218
+[ 9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c
+[ 9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4
+[ 9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54
+[ 9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8
+[ 9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0
+[ 9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80
+[ 9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08
+[ 9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0
+[ 9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498
+[ 9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c
+[ 9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c
+[ 9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318
+[ 9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444
+[ 9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54
+[ 9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8
+[ 9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0
+[ 9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c
+
+Signed-off-by: Scott Wood <oss@buserror.net>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/freescale/fman/fman_memac.c | 2 +-
+ drivers/net/ethernet/freescale/fman/fman_tgec.c | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c
+index c0296880feba..75ce773c21a6 100644
+--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
++++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
+@@ -927,7 +927,7 @@ int memac_add_hash_mac_address(struct fman_mac *memac, enet_addr_t *eth_addr)
+ hash = get_mac_addr_hash_code(addr) & HASH_CTRL_ADDR_MASK;
+
+ /* Create element to be added to the driver hash table */
+- hash_entry = kmalloc(sizeof(*hash_entry), GFP_KERNEL);
++ hash_entry = kmalloc(sizeof(*hash_entry), GFP_ATOMIC);
+ if (!hash_entry)
+ return -ENOMEM;
+ hash_entry->addr = addr;
+diff --git a/drivers/net/ethernet/freescale/fman/fman_tgec.c b/drivers/net/ethernet/freescale/fman/fman_tgec.c
+index 4b0f3a50b293..e575259d20f4 100644
+--- a/drivers/net/ethernet/freescale/fman/fman_tgec.c
++++ b/drivers/net/ethernet/freescale/fman/fman_tgec.c
+@@ -551,7 +551,7 @@ int tgec_add_hash_mac_address(struct fman_mac *tgec, enet_addr_t *eth_addr)
+ hash = (crc >> TGEC_HASH_MCAST_SHIFT) & TGEC_HASH_ADR_MSK;
+
+ /* Create element to be added to the driver hash table */
+- hash_entry = kmalloc(sizeof(*hash_entry), GFP_KERNEL);
++ hash_entry = kmalloc(sizeof(*hash_entry), GFP_ATOMIC);
+ if (!hash_entry)
+ return -ENOMEM;
+ hash_entry->addr = addr;
+--
+2.19.1
+
--- /dev/null
+From 4757af5037c738699f58e57bbb9a82292cc1aab2 Mon Sep 17 00:00:00 2001
+From: Wenwen Wang <wang6495@umn.edu>
+Date: Wed, 26 Dec 2018 20:15:13 -0600
+Subject: gdrom: fix a memory leak bug
+
+[ Upstream commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017 ]
+
+In probe_gdrom(), the buffer pointed by 'gd.cd_info' is allocated through
+kzalloc() and is used to hold the information of the gdrom device. To
+register and unregister the device, the pointer 'gd.cd_info' is passed to
+the functions register_cdrom() and unregister_cdrom(), respectively.
+However, this buffer is not freed after it is used, which can cause a
+memory leak bug.
+
+This patch simply frees the buffer 'gd.cd_info' in exit_gdrom() to fix the
+above issue.
+
+Signed-off-by: Wenwen Wang <wang6495@umn.edu>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/cdrom/gdrom.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
+index ae3a7537cf0f..72cd96a8eb19 100644
+--- a/drivers/cdrom/gdrom.c
++++ b/drivers/cdrom/gdrom.c
+@@ -889,6 +889,7 @@ static void __exit exit_gdrom(void)
+ platform_device_unregister(pd);
+ platform_driver_unregister(&gdrom_driver);
+ kfree(gd.toc);
++ kfree(gd.cd_info);
+ }
+
+ module_init(init_gdrom);
+--
+2.19.1
+
--- /dev/null
+From b9bca25afcf178d1e5fb49b86bfb9bd7b63c5eb6 Mon Sep 17 00:00:00 2001
+From: Steve Longerbeam <slongerbeam@gmail.com>
+Date: Wed, 19 Sep 2018 16:07:18 -0700
+Subject: gpu: ipu-v3: image-convert: Prevent race between run and unprepare
+
+[ Upstream commit 819bec35c8c9706185498c9222bd244e0781ad35 ]
+
+Prevent possible race by parallel threads between ipu_image_convert_run()
+and ipu_image_convert_unprepare(). This involves setting ctx->aborting
+to true unconditionally so that no new job runs can be queued during
+unprepare, and holding the ctx->aborting flag until the context is freed.
+
+Note that the "normal" ipu_image_convert_abort() case (e.g. not during
+context unprepare) should clear the ctx->aborting flag after aborting
+any active run and clearing the context's pending queue. This is because
+it should be possible to continue to use the conversion context and queue
+more runs after an abort.
+
+Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
+Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
+Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/gpu/ipu-v3/ipu-image-convert.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/gpu/ipu-v3/ipu-image-convert.c b/drivers/gpu/ipu-v3/ipu-image-convert.c
+index 524a717ab28e..a5e33d58e02f 100644
+--- a/drivers/gpu/ipu-v3/ipu-image-convert.c
++++ b/drivers/gpu/ipu-v3/ipu-image-convert.c
+@@ -1518,7 +1518,7 @@ unlock:
+ EXPORT_SYMBOL_GPL(ipu_image_convert_queue);
+
+ /* Abort any active or pending conversions for this context */
+-void ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx)
++static void __ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx)
+ {
+ struct ipu_image_convert_chan *chan = ctx->chan;
+ struct ipu_image_convert_priv *priv = chan->priv;
+@@ -1545,7 +1545,7 @@ void ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx)
+
+ need_abort = (run_count || active_run);
+
+- ctx->aborting = need_abort;
++ ctx->aborting = true;
+
+ spin_unlock_irqrestore(&chan->irqlock, flags);
+
+@@ -1566,7 +1566,11 @@ void ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx)
+ dev_warn(priv->ipu->dev, "%s: timeout\n", __func__);
+ force_abort(ctx);
+ }
++}
+
++void ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx)
++{
++ __ipu_image_convert_abort(ctx);
+ ctx->aborting = false;
+ }
+ EXPORT_SYMBOL_GPL(ipu_image_convert_abort);
+@@ -1580,7 +1584,7 @@ void ipu_image_convert_unprepare(struct ipu_image_convert_ctx *ctx)
+ bool put_res;
+
+ /* make sure no runs are hanging around */
+- ipu_image_convert_abort(ctx);
++ __ipu_image_convert_abort(ctx);
+
+ dev_dbg(priv->ipu->dev, "%s: task %u: removing ctx %p\n", __func__,
+ chan->ic_task, ctx);
+--
+2.19.1
+
--- /dev/null
+From 3d2af0d8a7b04c3db28360a1736872afa4b07d81 Mon Sep 17 00:00:00 2001
+From: Aditya Pakki <pakki001@umn.edu>
+Date: Mon, 24 Dec 2018 15:39:14 -0600
+Subject: HID: lenovo: Add checks to fix of_led_classdev_register
+
+[ Upstream commit 6ae16dfb61bce538d48b7fe98160fada446056c5 ]
+
+In lenovo_probe_tpkbd(), the function of_led_classdev_register() could
+return an error value that is unchecked. The fix adds these checks.
+
+Signed-off-by: Aditya Pakki <pakki001@umn.edu>
+Signed-off-by: Jiri Kosina <jkosina@suse.cz>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/hid/hid-lenovo.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c
+index 643b6eb54442..eacc76d2ab96 100644
+--- a/drivers/hid/hid-lenovo.c
++++ b/drivers/hid/hid-lenovo.c
+@@ -743,7 +743,9 @@ static int lenovo_probe_tpkbd(struct hid_device *hdev)
+ data_pointer->led_mute.brightness_get = lenovo_led_brightness_get_tpkbd;
+ data_pointer->led_mute.brightness_set = lenovo_led_brightness_set_tpkbd;
+ data_pointer->led_mute.dev = dev;
+- led_classdev_register(dev, &data_pointer->led_mute);
++ ret = led_classdev_register(dev, &data_pointer->led_mute);
++ if (ret < 0)
++ goto err;
+
+ data_pointer->led_micmute.name = name_micmute;
+ data_pointer->led_micmute.brightness_get =
+@@ -751,7 +753,11 @@ static int lenovo_probe_tpkbd(struct hid_device *hdev)
+ data_pointer->led_micmute.brightness_set =
+ lenovo_led_brightness_set_tpkbd;
+ data_pointer->led_micmute.dev = dev;
+- led_classdev_register(dev, &data_pointer->led_micmute);
++ ret = led_classdev_register(dev, &data_pointer->led_micmute);
++ if (ret < 0) {
++ led_classdev_unregister(&data_pointer->led_mute);
++ goto err;
++ }
+
+ lenovo_features_set_tpkbd(hdev);
+
+--
+2.19.1
+
--- /dev/null
+From 8910f9415d8bd2ceb3006e46e8c3cd6ec966b858 Mon Sep 17 00:00:00 2001
+From: Kangjie Lu <kjlu@umn.edu>
+Date: Fri, 21 Dec 2018 13:10:39 -0600
+Subject: hwmon: (lm80) fix a missing check of bus read in lm80 probe
+
+[ Upstream commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315 ]
+
+In lm80_probe(), if lm80_read_value() fails, it returns a negative
+error number which is stored to data->fan[f_min] and will be further
+used. We should avoid using the data if the read fails.
+
+The fix checks if lm80_read_value() fails, and if so, returns with the
+error number.
+
+Signed-off-by: Kangjie Lu <kjlu@umn.edu>
+Signed-off-by: Guenter Roeck <linux@roeck-us.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/hwmon/lm80.c | 11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
+index 04f9df0d2341..0e30fa00204c 100644
+--- a/drivers/hwmon/lm80.c
++++ b/drivers/hwmon/lm80.c
+@@ -628,6 +628,7 @@ static int lm80_probe(struct i2c_client *client,
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct lm80_data *data;
++ int rv;
+
+ data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL);
+ if (!data)
+@@ -640,8 +641,14 @@ static int lm80_probe(struct i2c_client *client,
+ lm80_init_client(client);
+
+ /* A few vars need to be filled upon startup */
+- data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+- data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
++ rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
++ if (rv < 0)
++ return rv;
++ data->fan[f_min][0] = rv;
++ rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
++ if (rv < 0)
++ return rv;
++ data->fan[f_min][1] = rv;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data, lm80_groups);
+--
+2.19.1
+
--- /dev/null
+From 8fc49e2215386590ee32ca84e4f7b2dc4e740c6c Mon Sep 17 00:00:00 2001
+From: Kangjie Lu <kjlu@umn.edu>
+Date: Fri, 21 Dec 2018 13:01:33 -0600
+Subject: hwmon: (lm80) fix a missing check of the status of SMBus read
+
+[ Upstream commit c9c63915519b1def7043b184680f33c24cd49d7b ]
+
+If lm80_read_value() fails, it returns a negative number instead of the
+correct read data. Therefore, we should avoid using the data if it
+fails.
+
+The fix checks if lm80_read_value() fails, and if so, returns with the
+error number.
+
+Signed-off-by: Kangjie Lu <kjlu@umn.edu>
+[groeck: One variable for return values is enough]
+Signed-off-by: Guenter Roeck <linux@roeck-us.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/hwmon/lm80.c | 15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
+index 08e3945a6fbf..04f9df0d2341 100644
+--- a/drivers/hwmon/lm80.c
++++ b/drivers/hwmon/lm80.c
+@@ -360,9 +360,11 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ struct i2c_client *client = data->client;
+ unsigned long min, val;
+ u8 reg;
+- int err = kstrtoul(buf, 10, &val);
+- if (err < 0)
+- return err;
++ int rv;
++
++ rv = kstrtoul(buf, 10, &val);
++ if (rv < 0)
++ return rv;
+
+ /* Save fan_min */
+ mutex_lock(&data->update_lock);
+@@ -390,8 +392,11 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ return -EINVAL;
+ }
+
+- reg = (lm80_read_value(client, LM80_REG_FANDIV) &
+- ~(3 << (2 * (nr + 1)))) | (data->fan_div[nr] << (2 * (nr + 1)));
++ rv = lm80_read_value(client, LM80_REG_FANDIV);
++ if (rv < 0)
++ return rv;
++ reg = (rv & ~(3 << (2 * (nr + 1))))
++ | (data->fan_div[nr] << (2 * (nr + 1)));
+ lm80_write_value(client, LM80_REG_FANDIV, reg);
+
+ /* Restore fan_min */
+--
+2.19.1
+
--- /dev/null
+From ca4aebb846984b03c9992afb4c4600d5454e7f7a Mon Sep 17 00:00:00 2001
+From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@nokia.com>
+Date: Mon, 10 Dec 2018 15:01:27 +0000
+Subject: i2c-axxia: check for error conditions first
+
+[ Upstream commit 4f5c85fe3a60ace555d09898166af372547f97fc ]
+
+It was observed that when using seqentional mode contrary to the
+documentation, the SS bit (which is supposed to only be set if
+automatic/sequence command completed normally), is sometimes set
+together with NA (NAK in address phase) causing transfer to falsely be
+considered successful.
+
+My assumption is that this does not happen during manual mode since the
+controller is stopping its work the moment it sets NA/ND bit in status
+register. This is not the case in Automatic/Sequentional mode where it
+is still working to send STOP condition and the actual status we get
+depends on the time when the ISR is run.
+
+This patch changes the order of checking status bits in ISR - error
+conditions are checked first and only if none of them occurred, the
+transfer may be considered successful. This is required to introduce
+using of sequentional mode in next patch.
+
+Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
+Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
+Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/i2c/busses/i2c-axxia.c | 32 ++++++++++++++++----------------
+ 1 file changed, 16 insertions(+), 16 deletions(-)
+
+diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
+index deea13838648..30d80ce0bde3 100644
+--- a/drivers/i2c/busses/i2c-axxia.c
++++ b/drivers/i2c/busses/i2c-axxia.c
+@@ -296,22 +296,7 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
+ i2c_int_disable(idev, MST_STATUS_TFL);
+ }
+
+- if (status & MST_STATUS_SCC) {
+- /* Stop completed */
+- i2c_int_disable(idev, ~MST_STATUS_TSS);
+- complete(&idev->msg_complete);
+- } else if (status & MST_STATUS_SNS) {
+- /* Transfer done */
+- i2c_int_disable(idev, ~MST_STATUS_TSS);
+- if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
+- axxia_i2c_empty_rx_fifo(idev);
+- complete(&idev->msg_complete);
+- } else if (status & MST_STATUS_TSS) {
+- /* Transfer timeout */
+- idev->msg_err = -ETIMEDOUT;
+- i2c_int_disable(idev, ~MST_STATUS_TSS);
+- complete(&idev->msg_complete);
+- } else if (unlikely(status & MST_STATUS_ERR)) {
++ if (unlikely(status & MST_STATUS_ERR)) {
+ /* Transfer error */
+ i2c_int_disable(idev, ~0);
+ if (status & MST_STATUS_AL)
+@@ -328,6 +313,21 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
+ readl(idev->base + MST_TX_BYTES_XFRD),
+ readl(idev->base + MST_TX_XFER));
+ complete(&idev->msg_complete);
++ } else if (status & MST_STATUS_SCC) {
++ /* Stop completed */
++ i2c_int_disable(idev, ~MST_STATUS_TSS);
++ complete(&idev->msg_complete);
++ } else if (status & MST_STATUS_SNS) {
++ /* Transfer done */
++ i2c_int_disable(idev, ~MST_STATUS_TSS);
++ if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
++ axxia_i2c_empty_rx_fifo(idev);
++ complete(&idev->msg_complete);
++ } else if (status & MST_STATUS_TSS) {
++ /* Transfer timeout */
++ idev->msg_err = -ETIMEDOUT;
++ i2c_int_disable(idev, ~MST_STATUS_TSS);
++ complete(&idev->msg_complete);
+ }
+
+ out:
+--
+2.19.1
+
--- /dev/null
+From 51c8c72d25cd31dde91ef339a78081fa9bbcc3ea Mon Sep 17 00:00:00 2001
+From: Simon Horman <horms+renesas@verge.net.au>
+Date: Wed, 21 Nov 2018 13:09:28 +0100
+Subject: i2c: sh_mobile: add support for r8a77990 (R-Car E3)
+
+[ Upstream commit 5eb316e636eb298c204f5b368526d4480b63c0ba ]
+
+Add support for the IIC code for the r8a77990 (R-Car E3).
+
+It is not considered compatible with existing fallback bindings
+due to the documented absence of automatic transmission registers.
+
+These registers are currently not used by the driver and
+thus the provides the same behaviour for "renesas,iic-r8a77990" and
+"renesas,rcar-gen3-iic". The point of declaring incompatibility is
+to allow for automatic transmission register support to be added to
+"renesas,iic-r8a77990" and "renesas,rcar-gen3-iic" in future.
+
+Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
+Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
+Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/i2c/busses/i2c-sh_mobile.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
+index 6f2aaeb7c4fa..338344e76e02 100644
+--- a/drivers/i2c/busses/i2c-sh_mobile.c
++++ b/drivers/i2c/busses/i2c-sh_mobile.c
+@@ -836,6 +836,7 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
+ { .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config },
++ { .compatible = "renesas,iic-r8a77990", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
+ {},
+--
+2.19.1
+
--- /dev/null
+From 60df6f590592ccac15fbe0974a702f77dbf6b18f Mon Sep 17 00:00:00 2001
+From: Konstantin Khorenko <khorenko@virtuozzo.com>
+Date: Fri, 23 Nov 2018 19:10:28 +0300
+Subject: i40e: define proper net_device::neigh_priv_len
+
+[ Upstream commit 31389b53b3e0b535867af9090a5d19ec64768d55 ]
+
+Out of bound read reported by KASan.
+
+i40iw_net_event() reads unconditionally 16 bytes from
+neigh->primary_key while the memory allocated for
+"neighbour" struct is evaluated in neigh_alloc() as
+
+ tbl->entry_size + dev->neigh_priv_len
+
+where "dev" is a net_device.
+
+But the driver does not setup dev->neigh_priv_len and
+we read beyond the neigh entry allocated memory,
+so the patch in the next mail fixes this.
+
+Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
+Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
+Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
+index 904b42becd45..5d47a51e74eb 100644
+--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
++++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
+@@ -9772,6 +9772,9 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
+ ether_addr_copy(netdev->dev_addr, mac_addr);
+ ether_addr_copy(netdev->perm_addr, mac_addr);
+
++ /* i40iw_net_event() reads 16 bytes from neigh->primary_key */
++ netdev->neigh_priv_len = sizeof(u32) * 4;
++
+ netdev->priv_flags |= IFF_UNICAST_FLT;
+ netdev->priv_flags |= IFF_SUPP_NOFCS;
+ /* Setup netdev TC information */
+--
+2.19.1
+
--- /dev/null
+From a7f9c2009ccfdb1774995d8ee65e61093f5ca8b1 Mon Sep 17 00:00:00 2001
+From: Kaike Wan <kaike.wan@intel.com>
+Date: Wed, 28 Nov 2018 10:22:09 -0800
+Subject: IB/hfi1: Unreserve a reserved request when it is completed
+
+[ Upstream commit ca95f802ef5139722acc8d30aeaab6fe5bbe939e ]
+
+Currently, When a reserved operation is completed, its entry in the send
+queue will not be unreserved, which leads to the miscalculation of
+qp->s_avail and thus the triggering of a WARN_ON call trace. This patch
+fixes the problem by unreserving the reserved operation when it is
+completed.
+
+Fixes: 856cc4c237ad ("IB/hfi1: Add the capability for reserved operations")
+Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
+Signed-off-by: Kaike Wan <kaike.wan@intel.com>
+Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
+Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/infiniband/hw/hfi1/rc.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c
+index 818bac1a4056..d3b8cb92fd6d 100644
+--- a/drivers/infiniband/hw/hfi1/rc.c
++++ b/drivers/infiniband/hw/hfi1/rc.c
+@@ -1162,6 +1162,7 @@ void hfi1_rc_send_complete(struct rvt_qp *qp, struct hfi1_opa_header *opah)
+ if (cmp_psn(wqe->lpsn, qp->s_sending_psn) >= 0 &&
+ cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) <= 0)
+ break;
++ rvt_qp_wqe_unreserve(qp, wqe);
+ s_last = qp->s_last;
+ trace_hfi1_qp_send_completion(qp, wqe, s_last);
+ if (++s_last >= qp->s_size)
+@@ -1214,6 +1215,7 @@ static struct rvt_swqe *do_rc_completion(struct rvt_qp *qp,
+ u32 s_last;
+
+ rvt_put_swqe(wqe);
++ rvt_qp_wqe_unreserve(qp, wqe);
+ s_last = qp->s_last;
+ trace_hfi1_qp_send_completion(qp, wqe, s_last);
+ if (++s_last >= qp->s_size)
+--
+2.19.1
+
--- /dev/null
+From bd8f4a55661ee4926346dff1df80031b0e016f42 Mon Sep 17 00:00:00 2001
+From: Kai-Heng Feng <kai.heng.feng@canonical.com>
+Date: Mon, 3 Dec 2018 13:54:38 +0800
+Subject: igb: Fix an issue that PME is not enabled during runtime suspend
+
+[ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ]
+
+I210 ethernet card doesn't wakeup when a cable gets plugged. It's
+because its PME is not set.
+
+Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime
+suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops
+calling pci_finish_runtime_suspend(), which enables the PCI PME.
+
+To fix the issue, let's not to save PCI states when it's runtime
+suspend, to let the PCI subsystem enables PME.
+
+Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3")
+Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/intel/igb/igb_main.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
+index 1c027f9d9af5..8892ea5cbb01 100644
+--- a/drivers/net/ethernet/intel/igb/igb_main.c
++++ b/drivers/net/ethernet/intel/igb/igb_main.c
+@@ -7950,9 +7950,11 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
+ rtnl_unlock();
+
+ #ifdef CONFIG_PM
+- retval = pci_save_state(pdev);
+- if (retval)
+- return retval;
++ if (!runtime) {
++ retval = pci_save_state(pdev);
++ if (retval)
++ return retval;
++ }
+ #endif
+
+ status = rd32(E1000_STATUS);
+--
+2.19.1
+
--- /dev/null
+From 58fb55b08956e4df73c3eaa4d0b574e77e6a8b81 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 20 Nov 2018 12:10:14 +0100
+Subject: iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID
+
+[ Upstream commit 7f6232e69539971cf9eaed07a6c14ab4a2361133 ]
+
+Various 2-in-1's use KIOX010A and KIOX020A as HIDs for 2 KXCJ91008
+accelerometers. The KIOX010A HID is for the one in the base and the
+KIOX020A for the accelerometer in the keyboard.
+
+Since userspace does not have a way yet to deal with (or ignore) the
+accelerometer in the keyboard, this commit just adds the KIOX010A HID
+for now so that display rotation will work.
+
+Related: https://github.com/hadess/iio-sensor-proxy/issues/166
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iio/accel/kxcjk-1013.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
+index 3f968c46e667..784636800361 100644
+--- a/drivers/iio/accel/kxcjk-1013.c
++++ b/drivers/iio/accel/kxcjk-1013.c
+@@ -1393,6 +1393,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
+ {"KXCJ1008", KXCJ91008},
+ {"KXCJ9000", KXCJ91008},
+ {"KIOX000A", KXCJ91008},
++ {"KIOX010A", KXCJ91008}, /* KXCJ91008 inside the display of a 2-in-1 */
+ {"KXTJ1009", KXTJ21009},
+ {"SMO8500", KXCJ91008},
+ { },
+--
+2.19.1
+
--- /dev/null
+From 23138e0543134730c0bb67dda6e964c0b82a97f4 Mon Sep 17 00:00:00 2001
+From: Nicholas Mc Guire <hofrat@osadl.org>
+Date: Thu, 22 Nov 2018 08:46:43 +0100
+Subject: iio: adc: meson-saradc: check for devm_kasprintf failure
+
+[ Upstream commit aad172b017617994343e36d8659c69e14cd694fd ]
+
+devm_kasprintf() may return NULL on failure of internal allocation thus
+the assignments to init.name are not safe if not checked. On error
+meson_sar_adc_clk_init() returns negative values so -ENOMEM in the
+(unlikely) failure case of devm_kasprintf() should be fine here.
+
+Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
+Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
+Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iio/adc/meson_saradc.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
+index 11484cb38b84..9a52a91166d2 100644
+--- a/drivers/iio/adc/meson_saradc.c
++++ b/drivers/iio/adc/meson_saradc.c
+@@ -585,6 +585,9 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
+
+ init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_div",
+ indio_dev->dev.of_node);
++ if (!init.name)
++ return -ENOMEM;
++
+ init.flags = 0;
+ init.ops = &clk_divider_ops;
+ clk_parents[0] = __clk_get_name(priv->clkin);
+@@ -604,6 +607,9 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
+
+ init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_en",
+ indio_dev->dev.of_node);
++ if (!init.name)
++ return -ENOMEM;
++
+ init.flags = CLK_SET_RATE_PARENT;
+ init.ops = &clk_gate_ops;
+ clk_parents[0] = __clk_get_name(priv->adc_div_clk);
+--
+2.19.1
+
--- /dev/null
+From 1ba8b4bec29ae3a10a98f8b2dcfe68d88ba2b6f4 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Date: Thu, 22 Nov 2018 23:01:11 +0100
+Subject: iio: adc: meson-saradc: fix internal clock names
+
+[ Upstream commit 50314f98b0ac468218e7c9af8c99f215a35436df ]
+
+Before this patch we are registering the internal clocks (for example on
+Meson8b, where the SAR ADC IP block implements the divider and gate
+clocks) with the following names:
+- /soc/cbus@c1100000/adc@8680#adc_div
+- /soc/cbus@c1100000/adc@8680#adc_en
+
+This is bad because the common clock framework uses the clock to create
+a directory in <debugfs>/clk. With such name, the directory creation
+(silently) fails and the debugfs entry ends up being created at the
+debugfs root.
+
+With this change, the new clock names are:
+- c1108680.adc#adc_div
+- c1108680.adc#adc_en
+
+This matches the clock naming scheme used in the PWM, Ethernet and MMC
+drivers. It also fixes the problem with debugfs.
+The idea is shamelessly taken from commit b96e9eb62841c5 ("pwm: meson:
+Fix mux clock names").
+
+Fixes: 3921db46a8c5bc ("iio: Convert to using %pOF instead of full_name")
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iio/adc/meson_saradc.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
+index 9a52a91166d2..2515badf8b28 100644
+--- a/drivers/iio/adc/meson_saradc.c
++++ b/drivers/iio/adc/meson_saradc.c
+@@ -583,8 +583,8 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
+ struct clk_init_data init;
+ const char *clk_parents[1];
+
+- init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_div",
+- indio_dev->dev.of_node);
++ init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
++ dev_name(indio_dev->dev.parent));
+ if (!init.name)
+ return -ENOMEM;
+
+@@ -605,8 +605,8 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
+ if (WARN_ON(IS_ERR(priv->adc_div_clk)))
+ return PTR_ERR(priv->adc_div_clk);
+
+- init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%pOF#adc_en",
+- indio_dev->dev.of_node);
++ init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
++ dev_name(indio_dev->dev.parent));
+ if (!init.name)
+ return -ENOMEM;
+
+--
+2.19.1
+
--- /dev/null
+From 24391e08d40203b6c3222d82bed733e214c1e2a0 Mon Sep 17 00:00:00 2001
+From: Yu Zhao <yuzhao@google.com>
+Date: Thu, 6 Dec 2018 14:39:15 -0700
+Subject: iommu/amd: Fix amd_iommu=force_isolation
+
+[ Upstream commit c12b08ebbe16f0d3a96a116d86709b04c1ee8e74 ]
+
+The parameter is still there but it's ignored. We need to check its
+value before deciding to go into passthrough mode for AMD IOMMU v2
+capable device.
+
+We occasionally use this parameter to force v2 capable device into
+translation mode to debug memory corruption that we suspect is
+caused by DMA writes.
+
+To address the following comment from Joerg Roedel on the first
+version, v2 capability of device is completely ignored.
+> This breaks the iommu_v2 use-case, as it needs a direct mapping for the
+> devices that support it.
+
+And from Documentation/admin-guide/kernel-parameters.txt:
+ This option does not override iommu=pt
+
+Fixes: aafd8ba0ca74 ("iommu/amd: Implement add_device and remove_device")
+
+Signed-off-by: Yu Zhao <yuzhao@google.com>
+Signed-off-by: Joerg Roedel <jroedel@suse.de>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iommu/amd_iommu.c | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
+index efa6cd2500b9..766103ea237e 100644
+--- a/drivers/iommu/amd_iommu.c
++++ b/drivers/iommu/amd_iommu.c
+@@ -442,7 +442,14 @@ static int iommu_init_device(struct device *dev)
+
+ dev_data->alias = get_alias(dev);
+
+- if (dev_is_pci(dev) && pci_iommuv2_capable(to_pci_dev(dev))) {
++ /*
++ * By default we use passthrough mode for IOMMUv2 capable device.
++ * But if amd_iommu=force_isolation is set (e.g. to debug DMA to
++ * invalid address), we ignore the capability for the device so
++ * it'll be forced to go into translation mode.
++ */
++ if ((iommu_pass_through || !amd_iommu_force_isolation) &&
++ dev_is_pci(dev) && pci_iommuv2_capable(to_pci_dev(dev))) {
+ struct amd_iommu *iommu;
+
+ iommu = amd_iommu_rlookup_table[dev_data->devid];
+--
+2.19.1
+
--- /dev/null
+From 274ad900a19122f2976fd44093476d1734cfb522 Mon Sep 17 00:00:00 2001
+From: Vivek Gautam <vivek.gautam@codeaurora.org>
+Date: Tue, 4 Dec 2018 11:52:13 +0530
+Subject: iommu/arm-smmu: Add support for qcom,smmu-v2 variant
+
+[ Upstream commit 89cddc563743cb1e0068867ac97013b2a5bf86aa ]
+
+qcom,smmu-v2 is an arm,smmu-v2 implementation with specific
+clock and power requirements.
+On msm8996, multiple cores, viz. mdss, video, etc. use this
+smmu. On sdm845, this smmu is used with gpu.
+Add bindings for the same.
+
+Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Reviewed-by: Tomasz Figa <tfiga@chromium.org>
+Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Reviewed-by: Robin Murphy <robin.murphy@arm.com>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iommu/arm-smmu.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
+index 15b5856475fc..01a6a0ea2a4f 100644
+--- a/drivers/iommu/arm-smmu.c
++++ b/drivers/iommu/arm-smmu.c
+@@ -117,6 +117,7 @@ enum arm_smmu_implementation {
+ GENERIC_SMMU,
+ ARM_MMU500,
+ CAVIUM_SMMUV2,
++ QCOM_SMMUV2,
+ };
+
+ /* Until ACPICA headers cover IORT rev. C */
+@@ -1910,6 +1911,7 @@ ARM_SMMU_MATCH_DATA(smmu_generic_v2, ARM_SMMU_V2, GENERIC_SMMU);
+ ARM_SMMU_MATCH_DATA(arm_mmu401, ARM_SMMU_V1_64K, GENERIC_SMMU);
+ ARM_SMMU_MATCH_DATA(arm_mmu500, ARM_SMMU_V2, ARM_MMU500);
+ ARM_SMMU_MATCH_DATA(cavium_smmuv2, ARM_SMMU_V2, CAVIUM_SMMUV2);
++ARM_SMMU_MATCH_DATA(qcom_smmuv2, ARM_SMMU_V2, QCOM_SMMUV2);
+
+ static const struct of_device_id arm_smmu_of_match[] = {
+ { .compatible = "arm,smmu-v1", .data = &smmu_generic_v1 },
+@@ -1918,6 +1920,7 @@ static const struct of_device_id arm_smmu_of_match[] = {
+ { .compatible = "arm,mmu-401", .data = &arm_mmu401 },
+ { .compatible = "arm,mmu-500", .data = &arm_mmu500 },
+ { .compatible = "cavium,smmu-v2", .data = &cavium_smmuv2 },
++ { .compatible = "qcom,smmu-v2", .data = &qcom_smmuv2 },
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
+--
+2.19.1
+
--- /dev/null
+From 1a27f2261b683a80ba80c38bc477757534550ac6 Mon Sep 17 00:00:00 2001
+From: Will Deacon <will.deacon@arm.com>
+Date: Wed, 7 Nov 2018 22:58:24 +0000
+Subject: iommu/arm-smmu-v3: Use explicit mb() when moving cons pointer
+
+[ Upstream commit a868e8530441286342f90c1fd9c5f24de3aa2880 ]
+
+After removing an entry from a queue (e.g. reading an event in
+arm_smmu_evtq_thread()) it is necessary to advance the MMIO consumer
+pointer to free the queue slot back to the SMMU. A memory barrier is
+required here so that all reads targetting the queue entry have
+completed before the consumer pointer is updated.
+
+The implementation of queue_inc_cons() relies on a writel() to complete
+the previous reads, but this is incorrect because writel() is only
+guaranteed to complete prior writes. This patch replaces the call to
+writel() with an mb(); writel_relaxed() sequence, which gives us the
+read->write ordering which we require.
+
+Cc: Robin Murphy <robin.murphy@arm.com>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/iommu/arm-smmu-v3.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
+index 26e99c03390f..09eb258a9a7d 100644
+--- a/drivers/iommu/arm-smmu-v3.c
++++ b/drivers/iommu/arm-smmu-v3.c
+@@ -730,7 +730,13 @@ static void queue_inc_cons(struct arm_smmu_queue *q)
+ u32 cons = (Q_WRP(q, q->cons) | Q_IDX(q, q->cons)) + 1;
+
+ q->cons = Q_OVF(q, q->cons) | Q_WRP(q, cons) | Q_IDX(q, cons);
+- writel(q->cons, q->cons_reg);
++
++ /*
++ * Ensure that all CPU accesses (reads and writes) to the queue
++ * are complete before we update the cons pointer.
++ */
++ mb();
++ writel_relaxed(q->cons, q->cons_reg);
+ }
+
+ static int queue_sync_prod(struct arm_smmu_queue *q)
+--
+2.19.1
+
--- /dev/null
+From 480efe9830bd0edc8f863d0ef6c4f2a8d5967793 Mon Sep 17 00:00:00 2001
+From: Jia-Ju Bai <baijiaju1990@gmail.com>
+Date: Wed, 26 Dec 2018 22:09:34 +0800
+Subject: isdn: hisax: hfc_pci: Fix a possible concurrency use-after-free bug
+ in HFCPCI_l1hw()
+
+[ Upstream commit 7418e6520f22a2e35815122fa5a53d5bbfa2c10f ]
+
+In drivers/isdn/hisax/hfc_pci.c, the functions hfcpci_interrupt() and
+HFCPCI_l1hw() may be concurrently executed.
+
+HFCPCI_l1hw()
+ line 1173: if (!cs->tx_skb)
+
+hfcpci_interrupt()
+ line 942: spin_lock_irqsave();
+ line 1066: dev_kfree_skb_irq(cs->tx_skb);
+
+Thus, a possible concurrency use-after-free bug may occur
+in HFCPCI_l1hw().
+
+To fix these bugs, the calls to spin_lock_irqsave() and
+spin_unlock_irqrestore() are added in HFCPCI_l1hw(), to protect the
+access to cs->tx_skb.
+
+Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/isdn/hisax/hfc_pci.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
+index f9ca35cc32b1..b42d27a4c950 100644
+--- a/drivers/isdn/hisax/hfc_pci.c
++++ b/drivers/isdn/hisax/hfc_pci.c
+@@ -1169,11 +1169,13 @@ HFCPCI_l1hw(struct PStack *st, int pr, void *arg)
+ if (cs->debug & L1_DEB_LAPD)
+ debugl1(cs, "-> PH_REQUEST_PULL");
+ #endif
++ spin_lock_irqsave(&cs->lock, flags);
+ if (!cs->tx_skb) {
+ test_and_clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
+ st->l1.l1l2(st, PH_PULL | CONFIRM, NULL);
+ } else
+ test_and_set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
++ spin_unlock_irqrestore(&cs->lock, flags);
+ break;
+ case (HW_RESET | REQUEST):
+ spin_lock_irqsave(&cs->lock, flags);
+--
+2.19.1
+
--- /dev/null
+From 990c1aaedefaf2969fb65f7d5fa35698c504b400 Mon Sep 17 00:00:00 2001
+From: Douglas Anderson <dianders@chromium.org>
+Date: Tue, 4 Dec 2018 19:38:28 -0800
+Subject: kdb: Don't back trace on a cpu that didn't round up
+
+[ Upstream commit 162bc7f5afd75b72acbe3c5f3488ef7e64a3fe36 ]
+
+If you have a CPU that fails to round up and then run 'btc' you'll end
+up crashing in kdb becaue we dereferenced NULL. Let's add a check.
+It's wise to also set the task to NULL when leaving the debugger so
+that if we fail to round up on a later entry into the debugger we
+won't backtrace a stale task.
+
+Signed-off-by: Douglas Anderson <dianders@chromium.org>
+Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
+Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ kernel/debug/debug_core.c | 4 ++++
+ kernel/debug/kdb/kdb_bt.c | 11 ++++++++++-
+ kernel/debug/kdb/kdb_debugger.c | 7 -------
+ 3 files changed, 14 insertions(+), 8 deletions(-)
+
+diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
+index 65c0f1363788..94aa9ae0007a 100644
+--- a/kernel/debug/debug_core.c
++++ b/kernel/debug/debug_core.c
+@@ -535,6 +535,8 @@ return_normal:
+ arch_kgdb_ops.correct_hw_break();
+ if (trace_on)
+ tracing_on();
++ kgdb_info[cpu].debuggerinfo = NULL;
++ kgdb_info[cpu].task = NULL;
+ kgdb_info[cpu].exception_state &=
+ ~(DCPU_WANT_MASTER | DCPU_IS_SLAVE);
+ kgdb_info[cpu].enter_kgdb--;
+@@ -667,6 +669,8 @@ kgdb_restore:
+ if (trace_on)
+ tracing_on();
+
++ kgdb_info[cpu].debuggerinfo = NULL;
++ kgdb_info[cpu].task = NULL;
+ kgdb_info[cpu].exception_state &=
+ ~(DCPU_WANT_MASTER | DCPU_IS_SLAVE);
+ kgdb_info[cpu].enter_kgdb--;
+diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c
+index 7921ae4fca8d..7e2379aa0a1e 100644
+--- a/kernel/debug/kdb/kdb_bt.c
++++ b/kernel/debug/kdb/kdb_bt.c
+@@ -186,7 +186,16 @@ kdb_bt(int argc, const char **argv)
+ kdb_printf("btc: cpu status: ");
+ kdb_parse("cpu\n");
+ for_each_online_cpu(cpu) {
+- sprintf(buf, "btt 0x%px\n", KDB_TSK(cpu));
++ void *kdb_tsk = KDB_TSK(cpu);
++
++ /* If a CPU failed to round up we could be here */
++ if (!kdb_tsk) {
++ kdb_printf("WARNING: no task for cpu %ld\n",
++ cpu);
++ continue;
++ }
++
++ sprintf(buf, "btt 0x%px\n", kdb_tsk);
+ kdb_parse(buf);
+ touch_nmi_watchdog();
+ }
+diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c
+index 15e1a7af5dd0..53a0df6e4d92 100644
+--- a/kernel/debug/kdb/kdb_debugger.c
++++ b/kernel/debug/kdb/kdb_debugger.c
+@@ -118,13 +118,6 @@ int kdb_stub(struct kgdb_state *ks)
+ kdb_bp_remove();
+ KDB_STATE_CLEAR(DOING_SS);
+ KDB_STATE_SET(PAGER);
+- /* zero out any offline cpu data */
+- for_each_present_cpu(i) {
+- if (!cpu_online(i)) {
+- kgdb_info[i].debuggerinfo = NULL;
+- kgdb_info[i].task = NULL;
+- }
+- }
+ if (ks->err_code == DIE_OOPS || reason == KDB_REASON_OOPS) {
+ ks->pass_exception = 1;
+ KDB_FLAG_SET(CATASTROPHIC);
+--
+2.19.1
+
--- /dev/null
+From f847bbf16e2a944bae28994916c651a1f6b75410 Mon Sep 17 00:00:00 2001
+From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
+Date: Thu, 3 Jan 2019 15:26:31 -0800
+Subject: kernel/hung_task.c: break RCU locks based on jiffies
+
+[ Upstream commit 304ae42739b108305f8d7b3eb3c1aec7c2b643a9 ]
+
+check_hung_uninterruptible_tasks() is currently calling rcu_lock_break()
+for every 1024 threads. But check_hung_task() is very slow if printk()
+was called, and is very fast otherwise.
+
+If many threads within some 1024 threads called printk(), the RCU grace
+period might be extended enough to trigger RCU stall warnings.
+Therefore, calling rcu_lock_break() for every some fixed jiffies will be
+safer.
+
+Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
+Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
+Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
+Cc: Petr Mladek <pmladek@suse.com>
+Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Cc: Dmitry Vyukov <dvyukov@google.com>
+Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
+Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ kernel/hung_task.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/kernel/hung_task.c b/kernel/hung_task.c
+index 32b479468e4d..0cec1241e26f 100644
+--- a/kernel/hung_task.c
++++ b/kernel/hung_task.c
+@@ -33,7 +33,7 @@ int __read_mostly sysctl_hung_task_check_count = PID_MAX_LIMIT;
+ * is disabled during the critical section. It also controls the size of
+ * the RCU grace period. So it needs to be upper-bound.
+ */
+-#define HUNG_TASK_BATCHING 1024
++#define HUNG_TASK_LOCK_BREAK (HZ / 10)
+
+ /*
+ * Zero means infinite timeout - no checking done:
+@@ -164,7 +164,7 @@ static bool rcu_lock_break(struct task_struct *g, struct task_struct *t)
+ static void check_hung_uninterruptible_tasks(unsigned long timeout)
+ {
+ int max_count = sysctl_hung_task_check_count;
+- int batch_count = HUNG_TASK_BATCHING;
++ unsigned long last_break = jiffies;
+ struct task_struct *g, *t;
+
+ /*
+@@ -179,10 +179,10 @@ static void check_hung_uninterruptible_tasks(unsigned long timeout)
+ for_each_process_thread(g, t) {
+ if (!max_count--)
+ goto unlock;
+- if (!--batch_count) {
+- batch_count = HUNG_TASK_BATCHING;
++ if (time_after(jiffies, last_break + HUNG_TASK_LOCK_BREAK)) {
+ if (!rcu_lock_break(g, t))
+ goto unlock;
++ last_break = jiffies;
+ }
+ /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
+ if (t->state == TASK_UNINTERRUPTIBLE)
+--
+2.19.1
+
--- /dev/null
+From e0a3afc4cf6aa5704b12dfc7da9f4a7f0b6f6f88 Mon Sep 17 00:00:00 2001
+From: "Liu, Chuansheng" <chuansheng.liu@intel.com>
+Date: Thu, 3 Jan 2019 15:26:27 -0800
+Subject: kernel/hung_task.c: force console verbose before panic
+
+[ Upstream commit 168e06f7937d96c7222037d8a05565e8a6eb00fe ]
+
+Based on commit 401c636a0eeb ("kernel/hung_task.c: show all hung tasks
+before panic"), we could get the call stack of hung task.
+
+However, if the console loglevel is not high, we still can not see the
+useful panic information in practice, and in most cases users don't set
+console loglevel to high level.
+
+This patch is to force console verbose before system panic, so that the
+real useful information can be seen in the console, instead of being
+like the following, which doesn't have hung task information.
+
+ INFO: task init:1 blocked for more than 120 seconds.
+ Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
+ "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+ Kernel panic - not syncing: hung_task: blocked tasks
+ CPU: 2 PID: 479 Comm: khungtaskd Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
+ Call Trace:
+ dump_stack+0x4f/0x65
+ panic+0xde/0x231
+ watchdog+0x290/0x410
+ kthread+0x12c/0x150
+ ret_from_fork+0x35/0x40
+ reboot: panic mode set: p,w
+ Kernel Offset: 0x34000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
+
+Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A6015B675@SHSMSX101.ccr.corp.intel.com
+Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
+Reviewed-by: Petr Mladek <pmladek@suse.com>
+Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ kernel/hung_task.c | 12 +++++-------
+ 1 file changed, 5 insertions(+), 7 deletions(-)
+
+diff --git a/kernel/hung_task.c b/kernel/hung_task.c
+index 0cec1241e26f..f9aaf4994062 100644
+--- a/kernel/hung_task.c
++++ b/kernel/hung_task.c
+@@ -103,8 +103,11 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout)
+
+ trace_sched_process_hang(t);
+
+- if (!sysctl_hung_task_warnings && !sysctl_hung_task_panic)
+- return;
++ if (sysctl_hung_task_panic) {
++ console_verbose();
++ hung_task_show_lock = true;
++ hung_task_call_panic = true;
++ }
+
+ /*
+ * Ok, the task did not get scheduled for more than 2 minutes,
+@@ -126,11 +129,6 @@ static void check_hung_task(struct task_struct *t, unsigned long timeout)
+ }
+
+ touch_nmi_watchdog();
+-
+- if (sysctl_hung_task_panic) {
+- hung_task_show_lock = true;
+- hung_task_call_panic = true;
+- }
+ }
+
+ /*
+--
+2.19.1
+
--- /dev/null
+From 644d57a5bebe87828068d1349a81be1e713023e5 Mon Sep 17 00:00:00 2001
+From: Peter Rajnoha <prajnoha@redhat.com>
+Date: Wed, 5 Dec 2018 12:27:44 +0100
+Subject: kobject: return error code if writing /sys/.../uevent fails
+
+[ Upstream commit df44b479654f62b478c18ee4d8bc4e9f897a9844 ]
+
+Propagate error code back to userspace if writing the /sys/.../uevent
+file fails. Before, the write operation always returned with success,
+even if we failed to recognize the input string or if we failed to
+generate the uevent itself.
+
+With the error codes properly propagated back to userspace, we are
+able to react in userspace accordingly by not assuming and awaiting
+a uevent that is not delivered.
+
+Signed-off-by: Peter Rajnoha <prajnoha@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/base/bus.c | 12 ++++++++----
+ drivers/base/core.c | 8 +++++++-
+ kernel/module.c | 6 ++++--
+ 3 files changed, 19 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/base/bus.c b/drivers/base/bus.c
+index 1cf1460f8c90..3464c49dad0d 100644
+--- a/drivers/base/bus.c
++++ b/drivers/base/bus.c
+@@ -616,8 +616,10 @@ static void remove_probe_files(struct bus_type *bus)
+ static ssize_t uevent_store(struct device_driver *drv, const char *buf,
+ size_t count)
+ {
+- kobject_synth_uevent(&drv->p->kobj, buf, count);
+- return count;
++ int rc;
++
++ rc = kobject_synth_uevent(&drv->p->kobj, buf, count);
++ return rc ? rc : count;
+ }
+ static DRIVER_ATTR_WO(uevent);
+
+@@ -833,8 +835,10 @@ static void klist_devices_put(struct klist_node *n)
+ static ssize_t bus_uevent_store(struct bus_type *bus,
+ const char *buf, size_t count)
+ {
+- kobject_synth_uevent(&bus->p->subsys.kobj, buf, count);
+- return count;
++ int rc;
++
++ rc = kobject_synth_uevent(&bus->p->subsys.kobj, buf, count);
++ return rc ? rc : count;
+ }
+ static BUS_ATTR(uevent, S_IWUSR, NULL, bus_uevent_store);
+
+diff --git a/drivers/base/core.c b/drivers/base/core.c
+index fc5bbb2519fe..1c67bf24bc23 100644
+--- a/drivers/base/core.c
++++ b/drivers/base/core.c
+@@ -991,8 +991,14 @@ out:
+ static ssize_t uevent_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+ {
+- if (kobject_synth_uevent(&dev->kobj, buf, count))
++ int rc;
++
++ rc = kobject_synth_uevent(&dev->kobj, buf, count);
++
++ if (rc) {
+ dev_err(dev, "uevent: failed to send synthetic uevent\n");
++ return rc;
++ }
+
+ return count;
+ }
+diff --git a/kernel/module.c b/kernel/module.c
+index 2a44c515f0d7..94528b891027 100644
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -1201,8 +1201,10 @@ static ssize_t store_uevent(struct module_attribute *mattr,
+ struct module_kobject *mk,
+ const char *buffer, size_t count)
+ {
+- kobject_synth_uevent(&mk->kobj, buffer, count);
+- return count;
++ int rc;
++
++ rc = kobject_synth_uevent(&mk->kobj, buffer, count);
++ return rc ? rc : count;
+ }
+
+ struct module_attribute module_uevent =
+--
+2.19.1
+
--- /dev/null
+From 1865003015f38695971a888f153ff4fc0c13e46c Mon Sep 17 00:00:00 2001
+From: Jim Mattson <jmattson@google.com>
+Date: Fri, 14 Dec 2018 14:34:43 -0800
+Subject: kvm: Change offset in kvm_write_guest_offset_cached to unsigned
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 7a86dab8cf2f0fdf508f3555dddfc236623bff60 ]
+
+Since the offset is added directly to the hva from the
+gfn_to_hva_cache, a negative offset could result in an out of bounds
+write. The existing BUG_ON only checks for addresses beyond the end of
+the gfn_to_hva_cache, not for addresses before the start of the
+gfn_to_hva_cache.
+
+Note that all current call sites have non-negative offsets.
+
+Fixes: 4ec6e8636256 ("kvm: Introduce kvm_write_guest_offset_cached()")
+Reported-by: Cfir Cohen <cfir@google.com>
+Signed-off-by: Jim Mattson <jmattson@google.com>
+Reviewed-by: Cfir Cohen <cfir@google.com>
+Reviewed-by: Peter Shier <pshier@google.com>
+Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
+Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
+Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ include/linux/kvm_host.h | 3 ++-
+ virt/kvm/kvm_main.c | 3 ++-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
+index b6962ae6237e..4f7f19c1dc0a 100644
+--- a/include/linux/kvm_host.h
++++ b/include/linux/kvm_host.h
+@@ -685,7 +685,8 @@ int kvm_write_guest(struct kvm *kvm, gpa_t gpa, const void *data,
+ int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+ void *data, unsigned long len);
+ int kvm_write_guest_offset_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+- void *data, int offset, unsigned long len);
++ void *data, unsigned int offset,
++ unsigned long len);
+ int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+ gpa_t gpa, unsigned long len);
+ int kvm_clear_guest_page(struct kvm *kvm, gfn_t gfn, int offset, int len);
+diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
+index 4f35f0dfe681..bbc34e87d88f 100644
+--- a/virt/kvm/kvm_main.c
++++ b/virt/kvm/kvm_main.c
+@@ -1962,7 +1962,8 @@ int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+ EXPORT_SYMBOL_GPL(kvm_gfn_to_hva_cache_init);
+
+ int kvm_write_guest_offset_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+- void *data, int offset, unsigned long len)
++ void *data, unsigned int offset,
++ unsigned long len)
+ {
+ struct kvm_memslots *slots = kvm_memslots(kvm);
+ int r;
+--
+2.19.1
+
--- /dev/null
+From 1d8f3ea5e78c6461158ddcd2c8d75ff8a4f13ee3 Mon Sep 17 00:00:00 2001
+From: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
+Date: Fri, 14 Dec 2018 16:29:03 +1100
+Subject: KVM: PPC: Book3S: Only report KVM_CAP_SPAPR_TCE_VFIO on powernv
+ machines
+
+[ Upstream commit 693ac10a88a2219bde553b2e8460dbec97e594e6 ]
+
+The kvm capability KVM_CAP_SPAPR_TCE_VFIO is used to indicate the
+availability of in kernel tce acceleration for vfio. However it is
+currently the case that this is only available on a powernv machine,
+not for a pseries machine.
+
+Thus make this capability dependent on having the cpu feature
+CPU_FTR_HVMODE.
+
+[paulus@ozlabs.org - fixed compilation for Book E.]
+
+Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
+Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/powerpc/kvm/powerpc.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
+index ecb45361095b..a35995a6b34a 100644
+--- a/arch/powerpc/kvm/powerpc.c
++++ b/arch/powerpc/kvm/powerpc.c
+@@ -540,8 +540,11 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
+ #ifdef CONFIG_PPC_BOOK3S_64
+ case KVM_CAP_SPAPR_TCE:
+ case KVM_CAP_SPAPR_TCE_64:
+- /* fallthrough */
++ r = 1;
++ break;
+ case KVM_CAP_SPAPR_TCE_VFIO:
++ r = !!cpu_has_feature(CPU_FTR_HVMODE);
++ break;
+ case KVM_CAP_PPC_RTAS:
+ case KVM_CAP_PPC_FIXUP_HCALL:
+ case KVM_CAP_PPC_ENABLE_HCALL:
+--
+2.19.1
+
--- /dev/null
+From 798536c2da1d3d951a71807eb6f2978ff411f625 Mon Sep 17 00:00:00 2001
+From: Michael Mueller <mimu@linux.ibm.com>
+Date: Fri, 30 Nov 2018 15:32:06 +0100
+Subject: KVM: s390: unregister debug feature on failing arch init
+
+[ Upstream commit 308c3e6673b012beecb96ef04cc65f4a0e7cdd99 ]
+
+Make sure the debug feature and its allocated resources get
+released upon unsuccessful architecture initialization.
+
+A related indication of the issue will be reported as kernel
+message.
+
+Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
+Reviewed-by: Cornelia Huck <cohuck@redhat.com>
+Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
+Reviewed-by: David Hildenbrand <david@redhat.com>
+Message-Id: <20181130143215.69496-2-mimu@linux.ibm.com>
+Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/s390/kvm/kvm-s390.c | 17 ++++++++++++++---
+ 1 file changed, 14 insertions(+), 3 deletions(-)
+
+diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
+index 4f6adbea592b..f674a81c8868 100644
+--- a/arch/s390/kvm/kvm-s390.c
++++ b/arch/s390/kvm/kvm-s390.c
+@@ -361,19 +361,30 @@ static void kvm_s390_cpu_feat_init(void)
+
+ int kvm_arch_init(void *opaque)
+ {
++ int rc;
++
+ kvm_s390_dbf = debug_register("kvm-trace", 32, 1, 7 * sizeof(long));
+ if (!kvm_s390_dbf)
+ return -ENOMEM;
+
+ if (debug_register_view(kvm_s390_dbf, &debug_sprintf_view)) {
+- debug_unregister(kvm_s390_dbf);
+- return -ENOMEM;
++ rc = -ENOMEM;
++ goto out_debug_unreg;
+ }
+
+ kvm_s390_cpu_feat_init();
+
+ /* Register floating interrupt controller interface. */
+- return kvm_register_device_ops(&kvm_flic_ops, KVM_DEV_TYPE_FLIC);
++ rc = kvm_register_device_ops(&kvm_flic_ops, KVM_DEV_TYPE_FLIC);
++ if (rc) {
++ pr_err("Failed to register FLIC rc=%d\n", rc);
++ goto out_debug_unreg;
++ }
++ return 0;
++
++out_debug_unreg:
++ debug_unregister(kvm_s390_dbf);
++ return rc;
+ }
+
+ void kvm_arch_exit(void)
+--
+2.19.1
+
--- /dev/null
+From 455db39fce93411afb01cd33f4eb43942f4e2316 Mon Sep 17 00:00:00 2001
+From: Vitaly Kuznetsov <vkuznets@redhat.com>
+Date: Wed, 19 Dec 2018 12:06:13 +0100
+Subject: KVM: x86: svm: report MSR_IA32_MCG_EXT_CTL as unsupported
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit e87555e550cef4941579cd879759a7c0dee24e68 ]
+
+AMD doesn't seem to implement MSR_IA32_MCG_EXT_CTL and svm code in kvm
+knows nothing about it, however, this MSR is among emulated_msrs and
+thus returned with KVM_GET_MSR_INDEX_LIST. The consequent KVM_GET_MSRS,
+of course, fails.
+
+Report the MSR as unsupported to not confuse userspace.
+
+Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
+Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/x86/kvm/svm.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
+index 4dc79d139810..656ac12f5439 100644
+--- a/arch/x86/kvm/svm.c
++++ b/arch/x86/kvm/svm.c
+@@ -5319,6 +5319,13 @@ static bool svm_cpu_has_accelerated_tpr(void)
+
+ static bool svm_has_emulated_msr(int index)
+ {
++ switch (index) {
++ case MSR_IA32_MCG_EXT_CTL:
++ return false;
++ default:
++ break;
++ }
++
+ return true;
+ }
+
+--
+2.19.1
+
--- /dev/null
+From 974b13933af2ef26cee76af6826c5f926bf51b8a Mon Sep 17 00:00:00 2001
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Sat, 15 Dec 2018 11:03:12 +0200
+Subject: mac80211: fix radiotap vendor presence bitmap handling
+
+[ Upstream commit efc38dd7d5fa5c8cdd0c917c5d00947aa0539443 ]
+
+Due to the alignment handling, it actually matters where in the code
+we add the 4 bytes for the presence bitmap to the length; the first
+field is the timestamp with 8 byte alignment so we need to add the
+space for the extra vendor namespace presence bitmap *before* we do
+any alignment for the fields.
+
+Move the presence bitmap length accounting to the right place to fix
+the alignment for the data properly.
+
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/mac80211/rx.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
+index 9e19ddbcb06e..c7ac1a480b1d 100644
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -141,6 +141,9 @@ ieee80211_rx_radiotap_hdrlen(struct ieee80211_local *local,
+ /* allocate extra bitmaps */
+ if (status->chains)
+ len += 4 * hweight8(status->chains);
++ /* vendor presence bitmap */
++ if (status->flag & RX_FLAG_RADIOTAP_VENDOR_DATA)
++ len += 4;
+
+ if (ieee80211_have_rx_timestamp(status)) {
+ len = ALIGN(len, 8);
+@@ -182,8 +185,6 @@ ieee80211_rx_radiotap_hdrlen(struct ieee80211_local *local,
+ if (status->flag & RX_FLAG_RADIOTAP_VENDOR_DATA) {
+ struct ieee80211_vendor_radiotap *rtap = (void *)skb->data;
+
+- /* vendor presence bitmap */
+- len += 4;
+ /* alignment for fixed 6-byte vendor data header */
+ len = ALIGN(len, 2);
+ /* vendor data header */
+--
+2.19.1
+
--- /dev/null
+From 29370883ec6a7027da7f7a27a39d32ae645610cd Mon Sep 17 00:00:00 2001
+From: Guoqing Jiang <gqjiang@suse.com>
+Date: Wed, 19 Dec 2018 14:19:25 +0800
+Subject: md: fix raid10 hang issue caused by barrier
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit e820d55cb99dd93ac2dc949cf486bb187e5cd70d ]
+
+When both regular IO and resync IO happen at the same time,
+and if we also need to split regular. Then we can see tasks
+hang due to barrier.
+
+1. resync thread
+[ 1463.757205] INFO: task md1_resync:5215 blocked for more than 480 seconds.
+[ 1463.757207] Not tainted 4.19.5-1-default #1
+[ 1463.757209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+[ 1463.757212] md1_resync D 0 5215 2 0x80000000
+[ 1463.757216] Call Trace:
+[ 1463.757223] ? __schedule+0x29a/0x880
+[ 1463.757231] ? raise_barrier+0x8d/0x140 [raid10]
+[ 1463.757236] schedule+0x78/0x110
+[ 1463.757243] raise_barrier+0x8d/0x140 [raid10]
+[ 1463.757248] ? wait_woken+0x80/0x80
+[ 1463.757257] raid10_sync_request+0x1f6/0x1e30 [raid10]
+[ 1463.757265] ? _raw_spin_unlock_irq+0x22/0x40
+[ 1463.757284] ? is_mddev_idle+0x125/0x137 [md_mod]
+[ 1463.757302] md_do_sync.cold.78+0x404/0x969 [md_mod]
+[ 1463.757311] ? wait_woken+0x80/0x80
+[ 1463.757336] ? md_rdev_init+0xb0/0xb0 [md_mod]
+[ 1463.757351] md_thread+0xe9/0x140 [md_mod]
+[ 1463.757358] ? _raw_spin_unlock_irqrestore+0x2e/0x60
+[ 1463.757364] ? __kthread_parkme+0x4c/0x70
+[ 1463.757369] kthread+0x112/0x130
+[ 1463.757374] ? kthread_create_worker_on_cpu+0x40/0x40
+[ 1463.757380] ret_from_fork+0x3a/0x50
+
+2. regular IO
+[ 1463.760679] INFO: task kworker/0:8:5367 blocked for more than 480 seconds.
+[ 1463.760683] Not tainted 4.19.5-1-default #1
+[ 1463.760684] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+[ 1463.760687] kworker/0:8 D 0 5367 2 0x80000000
+[ 1463.760718] Workqueue: md submit_flushes [md_mod]
+[ 1463.760721] Call Trace:
+[ 1463.760731] ? __schedule+0x29a/0x880
+[ 1463.760741] ? wait_barrier+0xdd/0x170 [raid10]
+[ 1463.760746] schedule+0x78/0x110
+[ 1463.760753] wait_barrier+0xdd/0x170 [raid10]
+[ 1463.760761] ? wait_woken+0x80/0x80
+[ 1463.760768] raid10_write_request+0xf2/0x900 [raid10]
+[ 1463.760774] ? wait_woken+0x80/0x80
+[ 1463.760778] ? mempool_alloc+0x55/0x160
+[ 1463.760795] ? md_write_start+0xa9/0x270 [md_mod]
+[ 1463.760801] ? try_to_wake_up+0x44/0x470
+[ 1463.760810] raid10_make_request+0xc1/0x120 [raid10]
+[ 1463.760816] ? wait_woken+0x80/0x80
+[ 1463.760831] md_handle_request+0x121/0x190 [md_mod]
+[ 1463.760851] md_make_request+0x78/0x190 [md_mod]
+[ 1463.760860] generic_make_request+0x1c6/0x470
+[ 1463.760870] raid10_write_request+0x77a/0x900 [raid10]
+[ 1463.760875] ? wait_woken+0x80/0x80
+[ 1463.760879] ? mempool_alloc+0x55/0x160
+[ 1463.760895] ? md_write_start+0xa9/0x270 [md_mod]
+[ 1463.760904] raid10_make_request+0xc1/0x120 [raid10]
+[ 1463.760910] ? wait_woken+0x80/0x80
+[ 1463.760926] md_handle_request+0x121/0x190 [md_mod]
+[ 1463.760931] ? _raw_spin_unlock_irq+0x22/0x40
+[ 1463.760936] ? finish_task_switch+0x74/0x260
+[ 1463.760954] submit_flushes+0x21/0x40 [md_mod]
+
+So resync io is waiting for regular write io to complete to
+decrease nr_pending (conf->barrier++ is called before waiting).
+The regular write io splits another bio after call wait_barrier
+which call nr_pending++, then the splitted bio would continue
+with raid10_write_request -> wait_barrier, so the splitted bio
+has to wait for barrier to be zero, then deadlock happens as
+follows.
+
+ resync io regular io
+
+ raise_barrier
+ wait_barrier
+ generic_make_request
+ wait_barrier
+
+To resolve the issue, we need to call allow_barrier to decrease
+nr_pending before generic_make_request since regular IO is not
+issued to underlying devices, and wait_barrier is called again
+to ensure no internal IO happening.
+
+Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.")
+Reported-and-tested-by: Siniša Bandin <sinisa@4net.rs>
+Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
+Signed-off-by: Shaohua Li <shli@fb.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/md/raid10.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
+index 52ddfa0fca94..2ce079a0b0bd 100644
+--- a/drivers/md/raid10.c
++++ b/drivers/md/raid10.c
+@@ -1190,7 +1190,9 @@ static void raid10_read_request(struct mddev *mddev, struct bio *bio,
+ struct bio *split = bio_split(bio, max_sectors,
+ gfp, conf->bio_split);
+ bio_chain(split, bio);
++ allow_barrier(conf);
+ generic_make_request(bio);
++ wait_barrier(conf);
+ bio = split;
+ r10_bio->master_bio = bio;
+ r10_bio->sectors = max_sectors;
+@@ -1479,7 +1481,9 @@ retry_write:
+ struct bio *split = bio_split(bio, r10_bio->sectors,
+ GFP_NOIO, conf->bio_split);
+ bio_chain(split, bio);
++ allow_barrier(conf);
+ generic_make_request(bio);
++ wait_barrier(conf);
+ bio = split;
+ r10_bio->master_bio = bio;
+ }
+--
+2.19.1
+
--- /dev/null
+From d9aed2f8dc9182d09f94ac2a65f7032e065f4794 Mon Sep 17 00:00:00 2001
+From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Date: Thu, 8 Nov 2018 04:51:51 -0500
+Subject: media: adv*/tc358743/ths8200: fill in min width/height/pixelclock
+
+[ Upstream commit 2912289a518077ddb8214e05336700148e97e235 ]
+
+The v4l2_dv_timings_cap struct is used to do sanity checks when setting and
+enumerating DV timings, ensuring that only valid timings as per the HW
+capabilities are allowed.
+
+However, many drivers just filled in 0 for the minimum width, height or
+pixelclock frequency. This can cause timings with e.g. 0 as width and height
+to be accepted, which will in turn lead to a potential division by zero.
+
+Fill in proper values are minimum boundaries. 640x350 was chosen since it is
+the smallest resolution in v4l2-dv-timings.h. Same for 13 MHz as the lowest
+pixelclock frequency (it's slightly below the minimum of 13.5 MHz in the
+v4l2-dv-timings.h header).
+
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/media/i2c/ad9389b.c | 2 +-
+ drivers/media/i2c/adv7511.c | 2 +-
+ drivers/media/i2c/adv7604.c | 4 ++--
+ drivers/media/i2c/adv7842.c | 4 ++--
+ drivers/media/i2c/tc358743.c | 2 +-
+ drivers/media/i2c/ths8200.c | 2 +-
+ 6 files changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/media/i2c/ad9389b.c b/drivers/media/i2c/ad9389b.c
+index a056d6cdaaaa..f0b200ae2127 100644
+--- a/drivers/media/i2c/ad9389b.c
++++ b/drivers/media/i2c/ad9389b.c
+@@ -590,7 +590,7 @@ static const struct v4l2_dv_timings_cap ad9389b_timings_cap = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+- V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 170000000,
++ V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 170000000,
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
+diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c
+index 2817bafc67bf..80c20404334a 100644
+--- a/drivers/media/i2c/adv7511.c
++++ b/drivers/media/i2c/adv7511.c
+@@ -142,7 +142,7 @@ static const struct v4l2_dv_timings_cap adv7511_timings_cap = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+- V4L2_INIT_BT_TIMINGS(0, ADV7511_MAX_WIDTH, 0, ADV7511_MAX_HEIGHT,
++ V4L2_INIT_BT_TIMINGS(640, ADV7511_MAX_WIDTH, 350, ADV7511_MAX_HEIGHT,
+ ADV7511_MIN_PIXELCLOCK, ADV7511_MAX_PIXELCLOCK,
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
+index f289b8aca1da..d2108aad3c65 100644
+--- a/drivers/media/i2c/adv7604.c
++++ b/drivers/media/i2c/adv7604.c
+@@ -778,7 +778,7 @@ static const struct v4l2_dv_timings_cap adv7604_timings_cap_analog = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+- V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 170000000,
++ V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 170000000,
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
+@@ -789,7 +789,7 @@ static const struct v4l2_dv_timings_cap adv76xx_timings_cap_digital = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+- V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 225000000,
++ V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 225000000,
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
+diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
+index 65f34e7e146f..f9c23173c9fa 100644
+--- a/drivers/media/i2c/adv7842.c
++++ b/drivers/media/i2c/adv7842.c
+@@ -676,7 +676,7 @@ static const struct v4l2_dv_timings_cap adv7842_timings_cap_analog = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+- V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 170000000,
++ V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 170000000,
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
+@@ -687,7 +687,7 @@ static const struct v4l2_dv_timings_cap adv7842_timings_cap_digital = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+- V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1200, 25000000, 225000000,
++ V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 225000000,
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
+diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
+index e6f5c363ccab..c9647e24a4a3 100644
+--- a/drivers/media/i2c/tc358743.c
++++ b/drivers/media/i2c/tc358743.c
+@@ -70,7 +70,7 @@ static const struct v4l2_dv_timings_cap tc358743_timings_cap = {
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+ /* Pixel clock from REF_01 p. 20. Min/max height/width are unknown */
+- V4L2_INIT_BT_TIMINGS(1, 10000, 1, 10000, 0, 165000000,
++ V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 13000000, 165000000,
+ V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
+ V4L2_DV_BT_CAP_PROGRESSIVE |
+diff --git a/drivers/media/i2c/ths8200.c b/drivers/media/i2c/ths8200.c
+index 498ad2368cbc..f5ee28058ea2 100644
+--- a/drivers/media/i2c/ths8200.c
++++ b/drivers/media/i2c/ths8200.c
+@@ -49,7 +49,7 @@ static const struct v4l2_dv_timings_cap ths8200_timings_cap = {
+ .type = V4L2_DV_BT_656_1120,
+ /* keep this initialization for compatibility with GCC < 4.4.6 */
+ .reserved = { 0 },
+- V4L2_INIT_BT_TIMINGS(0, 1920, 0, 1080, 25000000, 148500000,
++ V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1080, 25000000, 148500000,
+ V4L2_DV_BT_STD_CEA861, V4L2_DV_BT_CAP_PROGRESSIVE)
+ };
+
+--
+2.19.1
+
--- /dev/null
+From 6068839ca5ebcf8a06ac6456566a506793ba676e Mon Sep 17 00:00:00 2001
+From: Philipp Zabel <p.zabel@pengutronix.de>
+Date: Wed, 28 Nov 2018 08:01:22 -0500
+Subject: media: coda: fix H.264 deblocking filter controls
+
+[ Upstream commit 75fa6e4f83a0923fe753827d354998d448b4fd6a ]
+
+Add support for the third loop filter mode
+V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY,
+and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and
+V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls.
+
+The filter offset controls are signed values in the -6 to 6 range and
+are stored into the slice header fields slice_alpha_c0_offset_div2 and
+slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are
+double their value, in range of -12 to 12.
+
+Rename variables to more closely match the nomenclature in the H.264
+specification.
+
+Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/media/platform/coda/coda-bit.c | 19 +++++++++----------
+ drivers/media/platform/coda/coda-common.c | 15 +++++++--------
+ drivers/media/platform/coda/coda.h | 6 +++---
+ drivers/media/platform/coda/coda_regs.h | 2 +-
+ 4 files changed, 20 insertions(+), 22 deletions(-)
+
+diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
+index 291c40933935..3457a5f1c8a8 100644
+--- a/drivers/media/platform/coda/coda-bit.c
++++ b/drivers/media/platform/coda/coda-bit.c
+@@ -953,16 +953,15 @@ static int coda_start_encoding(struct coda_ctx *ctx)
+ else
+ coda_write(dev, CODA_STD_H264,
+ CODA_CMD_ENC_SEQ_COD_STD);
+- if (ctx->params.h264_deblk_enabled) {
+- value = ((ctx->params.h264_deblk_alpha &
+- CODA_264PARAM_DEBLKFILTEROFFSETALPHA_MASK) <<
+- CODA_264PARAM_DEBLKFILTEROFFSETALPHA_OFFSET) |
+- ((ctx->params.h264_deblk_beta &
+- CODA_264PARAM_DEBLKFILTEROFFSETBETA_MASK) <<
+- CODA_264PARAM_DEBLKFILTEROFFSETBETA_OFFSET);
+- } else {
+- value = 1 << CODA_264PARAM_DISABLEDEBLK_OFFSET;
+- }
++ value = ((ctx->params.h264_disable_deblocking_filter_idc &
++ CODA_264PARAM_DISABLEDEBLK_MASK) <<
++ CODA_264PARAM_DISABLEDEBLK_OFFSET) |
++ ((ctx->params.h264_slice_alpha_c0_offset_div2 &
++ CODA_264PARAM_DEBLKFILTEROFFSETALPHA_MASK) <<
++ CODA_264PARAM_DEBLKFILTEROFFSETALPHA_OFFSET) |
++ ((ctx->params.h264_slice_beta_offset_div2 &
++ CODA_264PARAM_DEBLKFILTEROFFSETBETA_MASK) <<
++ CODA_264PARAM_DEBLKFILTEROFFSETBETA_OFFSET);
+ coda_write(dev, value, CODA_CMD_ENC_SEQ_264_PARA);
+ break;
+ case V4L2_PIX_FMT_JPEG:
+diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
+index 99d138d3f87f..2e1472fadc2c 100644
+--- a/drivers/media/platform/coda/coda-common.c
++++ b/drivers/media/platform/coda/coda-common.c
+@@ -1675,14 +1675,13 @@ static int coda_s_ctrl(struct v4l2_ctrl *ctrl)
+ ctx->params.h264_max_qp = ctrl->val;
+ break;
+ case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA:
+- ctx->params.h264_deblk_alpha = ctrl->val;
++ ctx->params.h264_slice_alpha_c0_offset_div2 = ctrl->val;
+ break;
+ case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA:
+- ctx->params.h264_deblk_beta = ctrl->val;
++ ctx->params.h264_slice_beta_offset_div2 = ctrl->val;
+ break;
+ case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:
+- ctx->params.h264_deblk_enabled = (ctrl->val ==
+- V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED);
++ ctx->params.h264_disable_deblocking_filter_idc = ctrl->val;
+ break;
+ case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
+ /* TODO: switch between baseline and constrained baseline */
+@@ -1764,13 +1763,13 @@ static void coda_encode_ctrls(struct coda_ctx *ctx)
+ v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops,
+ V4L2_CID_MPEG_VIDEO_H264_MAX_QP, 0, 51, 1, 51);
+ v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops,
+- V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA, 0, 15, 1, 0);
++ V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA, -6, 6, 1, 0);
+ v4l2_ctrl_new_std(&ctx->ctrls, &coda_ctrl_ops,
+- V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA, 0, 15, 1, 0);
++ V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA, -6, 6, 1, 0);
+ v4l2_ctrl_new_std_menu(&ctx->ctrls, &coda_ctrl_ops,
+ V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE,
+- V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED, 0x0,
+- V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED);
++ V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY,
++ 0x0, V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED);
+ v4l2_ctrl_new_std_menu(&ctx->ctrls, &coda_ctrl_ops,
+ V4L2_CID_MPEG_VIDEO_H264_PROFILE,
+ V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, 0x0,
+diff --git a/drivers/media/platform/coda/coda.h b/drivers/media/platform/coda/coda.h
+index c5f504d8cf67..389a882cc3da 100644
+--- a/drivers/media/platform/coda/coda.h
++++ b/drivers/media/platform/coda/coda.h
+@@ -114,9 +114,9 @@ struct coda_params {
+ u8 h264_inter_qp;
+ u8 h264_min_qp;
+ u8 h264_max_qp;
+- u8 h264_deblk_enabled;
+- u8 h264_deblk_alpha;
+- u8 h264_deblk_beta;
++ u8 h264_disable_deblocking_filter_idc;
++ s8 h264_slice_alpha_c0_offset_div2;
++ s8 h264_slice_beta_offset_div2;
+ u8 h264_profile_idc;
+ u8 h264_level_idc;
+ u8 mpeg4_intra_qp;
+diff --git a/drivers/media/platform/coda/coda_regs.h b/drivers/media/platform/coda/coda_regs.h
+index 38df5fd9a2fa..546f5762357c 100644
+--- a/drivers/media/platform/coda/coda_regs.h
++++ b/drivers/media/platform/coda/coda_regs.h
+@@ -292,7 +292,7 @@
+ #define CODA_264PARAM_DEBLKFILTEROFFSETALPHA_OFFSET 8
+ #define CODA_264PARAM_DEBLKFILTEROFFSETALPHA_MASK 0x0f
+ #define CODA_264PARAM_DISABLEDEBLK_OFFSET 6
+-#define CODA_264PARAM_DISABLEDEBLK_MASK 0x01
++#define CODA_264PARAM_DISABLEDEBLK_MASK 0x03
+ #define CODA_264PARAM_CONSTRAINEDINTRAPREDFLAG_OFFSET 5
+ #define CODA_264PARAM_CONSTRAINEDINTRAPREDFLAG_MASK 0x01
+ #define CODA_264PARAM_CHROMAQPOFFSET_OFFSET 0
+--
+2.19.1
+
--- /dev/null
+From dd7eba9bb8c880d29c50af1bc2c42cce10d78be1 Mon Sep 17 00:00:00 2001
+From: Alexey Khoroshilov <khoroshilov@ispras.ru>
+Date: Fri, 23 Nov 2018 16:56:26 -0500
+Subject: media: DaVinci-VPBE: fix error handling in vpbe_initialize()
+
+[ Upstream commit aa35dc3c71950e3fec3e230c06c27c0fbd0067f8 ]
+
+If vpbe_set_default_output() or vpbe_set_default_mode() fails,
+vpbe_initialize() returns error code without releasing resources.
+
+The patch adds error handling for that case.
+
+Found by Linux Driver Verification project (linuxtesting.org).
+
+Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/media/platform/davinci/vpbe.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
+index 7f6462562579..1d3c13e36904 100644
+--- a/drivers/media/platform/davinci/vpbe.c
++++ b/drivers/media/platform/davinci/vpbe.c
+@@ -739,7 +739,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
+ if (ret) {
+ v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
+ def_output);
+- return ret;
++ goto fail_kfree_amp;
+ }
+
+ printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
+@@ -747,12 +747,15 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
+ if (ret) {
+ v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
+ def_mode);
+- return ret;
++ goto fail_kfree_amp;
+ }
+ vpbe_dev->initialized = 1;
+ /* TBD handling of bootargs for default output and mode */
+ return 0;
+
++fail_kfree_amp:
++ mutex_lock(&vpbe_dev->lock);
++ kfree(vpbe_dev->amp);
+ fail_kfree_encoders:
+ kfree(vpbe_dev->encoders);
+ fail_dev_unregister:
+--
+2.19.1
+
--- /dev/null
+From ff5eb4a4759b7c15bbe2986918a24a12c402e49f Mon Sep 17 00:00:00 2001
+From: Alexey Khoroshilov <khoroshilov@ispras.ru>
+Date: Sat, 20 Oct 2018 13:50:19 -0400
+Subject: media: mtk-vcodec: Release device nodes in mtk_vcodec_init_enc_pm()
+
+[ Upstream commit 8ea0f2ba0fa3f91ea1b8d823a54b042026ada6b3 ]
+
+of_parse_phandle() returns the device node with refcount incremented.
+There are two nodes that are used temporary in mtk_vcodec_init_enc_pm(),
+but their refcounts are not decremented.
+
+The patch adds one of_node_put() and fixes returning error codes.
+
+Found by Linux Driver Verification project (linuxtesting.org).
+
+Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
+Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 10 ++++++----
+ 1 file changed, 6 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+index 3e73e9db781f..7c025045ea90 100644
+--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
++++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+@@ -41,25 +41,27 @@ int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
+ node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
+ if (!node) {
+ mtk_v4l2_err("no mediatek,larb found");
+- return -1;
++ return -ENODEV;
+ }
+ pdev = of_find_device_by_node(node);
++ of_node_put(node);
+ if (!pdev) {
+ mtk_v4l2_err("no mediatek,larb device found");
+- return -1;
++ return -ENODEV;
+ }
+ pm->larbvenc = &pdev->dev;
+
+ node = of_parse_phandle(dev->of_node, "mediatek,larb", 1);
+ if (!node) {
+ mtk_v4l2_err("no mediatek,larb found");
+- return -1;
++ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(node);
++ of_node_put(node);
+ if (!pdev) {
+ mtk_v4l2_err("no mediatek,larb device found");
+- return -1;
++ return -ENODEV;
+ }
+
+ pm->larbvenclt = &pdev->dev;
+--
+2.19.1
+
--- /dev/null
+From ec2068d582818200eaece8c00e2c92b50e8548f6 Mon Sep 17 00:00:00 2001
+From: Kai-Heng Feng <kai.heng.feng@canonical.com>
+Date: Mon, 5 Nov 2018 16:45:04 +0800
+Subject: memstick: Prevent memstick host from getting runtime suspended during
+ card detection
+
+[ Upstream commit e03e303edf1c63e6dd455ccd568c74e93ef3ba8c ]
+
+We can use MEMSTICK_POWER_{ON,OFF} along with pm_runtime_{get,put}
+helpers to let memstick host support runtime pm.
+
+The rpm count may go down to zero before the memstick host powers on, so
+the host can be runtime suspended.
+
+So before doing card detection, increment the rpm count to avoid the
+host gets runtime suspended. Balance the rpm count after card detection
+is done.
+
+Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
+Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/memstick/core/memstick.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
+index 76382c858c35..1246d69ba187 100644
+--- a/drivers/memstick/core/memstick.c
++++ b/drivers/memstick/core/memstick.c
+@@ -18,6 +18,7 @@
+ #include <linux/delay.h>
+ #include <linux/slab.h>
+ #include <linux/module.h>
++#include <linux/pm_runtime.h>
+
+ #define DRIVER_NAME "memstick"
+
+@@ -436,6 +437,7 @@ static void memstick_check(struct work_struct *work)
+ struct memstick_dev *card;
+
+ dev_dbg(&host->dev, "memstick_check started\n");
++ pm_runtime_get_noresume(host->dev.parent);
+ mutex_lock(&host->lock);
+ if (!host->card) {
+ if (memstick_power_on(host))
+@@ -479,6 +481,7 @@ out_power_off:
+ host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
+
+ mutex_unlock(&host->lock);
++ pm_runtime_put(host->dev.parent);
+ dev_dbg(&host->dev, "memstick_check finished\n");
+ }
+
+--
+2.19.1
+
--- /dev/null
+From 999b2f248a640176069095a17c6bcbe223dc2b28 Mon Sep 17 00:00:00 2001
+From: Paul Burton <paul.burton@mips.com>
+Date: Sat, 10 Nov 2018 00:12:06 +0000
+Subject: MIPS: Boston: Disable EG20T prefetch
+
+[ Upstream commit 5ec17af7ead09701e23d2065e16db6ce4e137289 ]
+
+The Intel EG20T Platform Controller Hub used on the MIPS Boston
+development board supports prefetching memory to optimize DMA transfers.
+Unfortunately for unknown reasons this doesn't work well with some MIPS
+CPUs such as the P6600, particularly when using an I/O Coherence Unit
+(IOCU) to provide cache-coherent DMA. In these systems it is common for
+DMA data to be lost, resulting in broken access to EG20T devices such as
+the MMC or SATA controllers.
+
+Support for a DT property to configure the prefetching was added a while
+back by commit 549ce8f134bd ("misc: pch_phub: Read prefetch value from
+device tree if passed") but we never added the DT snippet to make use of
+it. Add that now in order to disable the prefetching & fix DMA on the
+affected systems.
+
+Signed-off-by: Paul Burton <paul.burton@mips.com>
+Patchwork: https://patchwork.linux-mips.org/patch/21068/
+Cc: linux-mips@linux-mips.org
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/mips/boot/dts/img/boston.dts | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
+index f7aad80c69ab..bebb0fa21369 100644
+--- a/arch/mips/boot/dts/img/boston.dts
++++ b/arch/mips/boot/dts/img/boston.dts
+@@ -141,6 +141,12 @@
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
++ eg20t_phub@2,0,0 {
++ compatible = "pci8086,8801";
++ reg = <0x00020000 0 0 0 0>;
++ intel,eg20t-prefetch = <0>;
++ };
++
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+--
+2.19.1
+
--- /dev/null
+From b3f9efb8759f9f132853f6442cd2a2a6c91e0c19 Mon Sep 17 00:00:00 2001
+From: Jiong Wang <jiong.wang@netronome.com>
+Date: Mon, 3 Dec 2018 17:27:54 -0500
+Subject: mips: bpf: fix encoding bug for mm_srlv32_op
+
+[ Upstream commit 17f6c83fb5ebf7db4fcc94a5be4c22d5a7bfe428 ]
+
+For micro-mips, srlv inside POOL32A encoding space should use 0x50
+sub-opcode, NOT 0x90.
+
+Some early version ISA doc describes the encoding as 0x90 for both srlv and
+srav, this looks to me was a typo. I checked Binutils libopcode
+implementation which is using 0x50 for srlv and 0x90 for srav.
+
+v1->v2:
+ - Keep mm_srlv32_op sorted by value.
+
+Fixes: f31318fdf324 ("MIPS: uasm: Add srlv uasm instruction")
+Cc: Markos Chandras <markos.chandras@imgtec.com>
+Cc: Paul Burton <paul.burton@mips.com>
+Cc: linux-mips@vger.kernel.org
+Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
+Acked-by: Song Liu <songliubraving@fb.com>
+Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
+Signed-off-by: Alexei Starovoitov <ast@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/mips/include/uapi/asm/inst.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
+index c05dcf5ab414..273ef58f4d43 100644
+--- a/arch/mips/include/uapi/asm/inst.h
++++ b/arch/mips/include/uapi/asm/inst.h
+@@ -369,8 +369,8 @@ enum mm_32a_minor_op {
+ mm_ext_op = 0x02c,
+ mm_pool32axf_op = 0x03c,
+ mm_srl32_op = 0x040,
++ mm_srlv32_op = 0x050,
+ mm_sra_op = 0x080,
+- mm_srlv32_op = 0x090,
+ mm_rotr_op = 0x0c0,
+ mm_lwxs_op = 0x118,
+ mm_addu32_op = 0x150,
+--
+2.19.1
+
--- /dev/null
+From a6aa36108c8a9839a5ae57cc165492693dcee47d Mon Sep 17 00:00:00 2001
+From: Stefan Roese <sr@denx.de>
+Date: Mon, 17 Dec 2018 10:47:48 +0100
+Subject: MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8
+
+[ Upstream commit 0b15394475e3bcaf35ca4bf22fc55d56df67224e ]
+
+Testing has shown, that when using mainline U-Boot on MT7688 based
+boards, the system may hang or crash while mounting the root-fs. The
+main issue here is that mainline U-Boot configures EBase to a value
+near the end of system memory. And with CONFIG_CPU_MIPSR2_IRQ_VI
+disabled, trap_init() will not allocate a new area to place the
+exception handler. The original value will be used and the handler
+will be copied to this location, which might already be used by some
+userspace application.
+
+The MT7688 supports VI - its config3 register is 0x00002420, so VInt
+(Bit 5) is set. But without setting CONFIG_CPU_MIPSR2_IRQ_VI this
+bit will not be evaluated to result in "cpu_has_vi" being set. This
+patch now selects CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8 which results
+trap_init() to allocate some memory for the exception handler.
+
+Please note that this issue was not seen with the Mediatek U-Boot
+version, as it does not touch EBase (stays at default of 0x8000.0000).
+This is strictly also not correct as the kernel (_text) resides
+here.
+
+Signed-off-by: Stefan Roese <sr@denx.de>
+[paul.burton@mips.com: s/beeing/being/]
+Signed-off-by: Paul Burton <paul.burton@mips.com>
+Cc: John Crispin <blogic@openwrt.org>
+Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Cc: Ralf Baechle <ralf@linux-mips.org>
+Cc: linux-mips@linux-mips.org
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/mips/ralink/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index f26736b7080b..fae36f0371d3 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -39,6 +39,7 @@ choice
+
+ config SOC_MT7620
+ bool "MT7620/8"
++ select CPU_MIPSR2_IRQ_VI
+ select HW_HAS_PCI
+
+ config SOC_MT7621
+--
+2.19.1
+
--- /dev/null
+From 3b659d59e601f82ba6f1ae4e2392e0ad365021b6 Mon Sep 17 00:00:00 2001
+From: Ido Schimmel <idosch@mellanox.com>
+Date: Wed, 19 Dec 2018 06:08:45 +0000
+Subject: mlxsw: spectrum: Properly cleanup LAG uppers when removing port from
+ LAG
+
+[ Upstream commit be2d6f421f680e01d58f7cd452646e0d8586d49b ]
+
+When a LAG device or a VLAN device on top of it is enslaved to a bridge,
+the driver propagates the CHANGEUPPER event to the LAG's slaves.
+
+This causes each physical port to increase the reference count of the
+internal representation of the bridge port by calling
+mlxsw_sp_port_bridge_join().
+
+However, when a port is removed from a LAG, the corresponding leave()
+function is not called and the reference count is not decremented. This
+leads to ugly hacks such as mlxsw_sp_bridge_port_should_destroy() that
+try to understand if the bridge port should be destroyed even when its
+reference count is not 0.
+
+Instead, make sure that when a port is unlinked from a LAG it would see
+the same events as if the LAG (or its uppers) were unlinked from a
+bridge.
+
+The above is achieved by walking the LAG's uppers when a port is
+unlinked and calling mlxsw_sp_port_bridge_leave() for each upper that is
+enslaved to a bridge.
+
+Signed-off-by: Ido Schimmel <idosch@mellanox.com>
+Reviewed-by: Petr Machata <petrm@mellanox.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ .../net/ethernet/mellanox/mlxsw/spectrum.c | 23 ++++++++++++++++
+ .../mellanox/mlxsw/spectrum_switchdev.c | 27 +------------------
+ 2 files changed, 24 insertions(+), 26 deletions(-)
+
+diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+index cf65b2ee8b95..7892e6b8d2e8 100644
+--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
++++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+@@ -3907,6 +3907,25 @@ void mlxsw_sp_port_dev_put(struct mlxsw_sp_port *mlxsw_sp_port)
+ dev_put(mlxsw_sp_port->dev);
+ }
+
++static void
++mlxsw_sp_port_lag_uppers_cleanup(struct mlxsw_sp_port *mlxsw_sp_port,
++ struct net_device *lag_dev)
++{
++ struct net_device *br_dev = netdev_master_upper_dev_get(lag_dev);
++ struct net_device *upper_dev;
++ struct list_head *iter;
++
++ if (netif_is_bridge_port(lag_dev))
++ mlxsw_sp_port_bridge_leave(mlxsw_sp_port, lag_dev, br_dev);
++
++ netdev_for_each_upper_dev_rcu(lag_dev, upper_dev, iter) {
++ if (!netif_is_bridge_port(upper_dev))
++ continue;
++ br_dev = netdev_master_upper_dev_get(upper_dev);
++ mlxsw_sp_port_bridge_leave(mlxsw_sp_port, upper_dev, br_dev);
++ }
++}
++
+ static int mlxsw_sp_lag_create(struct mlxsw_sp *mlxsw_sp, u16 lag_id)
+ {
+ char sldr_pl[MLXSW_REG_SLDR_LEN];
+@@ -4094,6 +4113,10 @@ static void mlxsw_sp_port_lag_leave(struct mlxsw_sp_port *mlxsw_sp_port,
+
+ /* Any VLANs configured on the port are no longer valid */
+ mlxsw_sp_port_vlan_flush(mlxsw_sp_port);
++ /* Make the LAG and its directly linked uppers leave bridges they
++ * are memeber in
++ */
++ mlxsw_sp_port_lag_uppers_cleanup(mlxsw_sp_port, lag_dev);
+
+ if (lag->ref_count == 1)
+ mlxsw_sp_lag_destroy(mlxsw_sp, lag_id);
+diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+index 9052e93e1925..f33fb95c4189 100644
+--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
++++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+@@ -291,30 +291,6 @@ mlxsw_sp_bridge_port_destroy(struct mlxsw_sp_bridge_port *bridge_port)
+ kfree(bridge_port);
+ }
+
+-static bool
+-mlxsw_sp_bridge_port_should_destroy(const struct mlxsw_sp_bridge_port *
+- bridge_port)
+-{
+- struct net_device *dev = bridge_port->dev;
+- struct mlxsw_sp *mlxsw_sp;
+-
+- if (is_vlan_dev(dev))
+- mlxsw_sp = mlxsw_sp_lower_get(vlan_dev_real_dev(dev));
+- else
+- mlxsw_sp = mlxsw_sp_lower_get(dev);
+-
+- /* In case ports were pulled from out of a bridged LAG, then
+- * it's possible the reference count isn't zero, yet the bridge
+- * port should be destroyed, as it's no longer an upper of ours.
+- */
+- if (!mlxsw_sp && list_empty(&bridge_port->vlans_list))
+- return true;
+- else if (bridge_port->ref_count == 0)
+- return true;
+- else
+- return false;
+-}
+-
+ static struct mlxsw_sp_bridge_port *
+ mlxsw_sp_bridge_port_get(struct mlxsw_sp_bridge *bridge,
+ struct net_device *brport_dev)
+@@ -352,8 +328,7 @@ static void mlxsw_sp_bridge_port_put(struct mlxsw_sp_bridge *bridge,
+ {
+ struct mlxsw_sp_bridge_device *bridge_device;
+
+- bridge_port->ref_count--;
+- if (!mlxsw_sp_bridge_port_should_destroy(bridge_port))
++ if (--bridge_port->ref_count != 0)
+ return;
+ bridge_device = bridge_port->bridge_device;
+ mlxsw_sp_bridge_port_destroy(bridge_port);
+--
+2.19.1
+
--- /dev/null
+From 1b9bfb15f1452d48a5d245d548c70660a00e8a72 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Sun, 11 Nov 2018 21:23:54 +0100
+Subject: mmc: bcm2835: Recover from MMC_SEND_EXT_CSD
+
+[ Upstream commit 07d405769afea5718529fc9e341f0b13b3189b6f ]
+
+If the user issues an "mmc extcsd read", the SD controller receives
+what it thinks is a SEND_IF_COND command with an unexpected data block.
+The resulting operations leave the FSM stuck in READWAIT, a state which
+persists until the MMC framework resets the controller, by which point
+the root filesystem is likely to have been unmounted.
+
+A less heavyweight solution is to detect the condition and nudge the
+FSM by asserting the (self-clearing) FORCE_DATA_MODE bit.
+
+Link: https://github.com/raspberrypi/linux/issues/2728
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
+Acked-by: Eric Anholt <eric@anholt.net>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/mmc/host/bcm2835.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
+index 0d3b7473bc21..abf1f3c8b0c3 100644
+--- a/drivers/mmc/host/bcm2835.c
++++ b/drivers/mmc/host/bcm2835.c
+@@ -772,6 +772,8 @@ static void bcm2835_finish_command(struct bcm2835_host *host)
+
+ if (!(sdhsts & SDHSTS_CRC7_ERROR) ||
+ (host->cmd->opcode != MMC_SEND_OP_COND)) {
++ u32 edm, fsm;
++
+ if (sdhsts & SDHSTS_CMD_TIME_OUT) {
+ host->cmd->error = -ETIMEDOUT;
+ } else {
+@@ -780,6 +782,13 @@ static void bcm2835_finish_command(struct bcm2835_host *host)
+ bcm2835_dumpregs(host);
+ host->cmd->error = -EILSEQ;
+ }
++ edm = readl(host->ioaddr + SDEDM);
++ fsm = edm & SDEDM_FSM_MASK;
++ if (fsm == SDEDM_FSM_READWAIT ||
++ fsm == SDEDM_FSM_WRITESTART1)
++ /* Kick the FSM out of its wait */
++ writel(edm | SDEDM_FORCE_DATA_MODE,
++ host->ioaddr + SDEDM);
+ bcm2835_finish_request(host);
+ return;
+ }
+--
+2.19.1
+
--- /dev/null
+From b4591640fb834e3a9717b3972c8cca5e8889b97b Mon Sep 17 00:00:00 2001
+From: Michal Suchanek <msuchanek@suse.de>
+Date: Sun, 11 Nov 2018 21:23:53 +0100
+Subject: mmc: bcm2835: reset host on timeout
+
+[ Upstream commit f6000a4eb34e6462bc0dd39809c1bb99f9633269 ]
+
+The bcm2835 mmc host tends to lock up for unknown reason so reset it on
+timeout. The upper mmc block layer tries retransimitting with single
+blocks which tends to work out after a long wait.
+
+This is better than giving up and leaving the machine broken for no
+obvious reason.
+
+Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.")
+Signed-off-by: Michal Suchanek <msuchanek@suse.de>
+Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
+Acked-by: Eric Anholt <eric@anholt.net>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/mmc/host/bcm2835.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
+index abf1f3c8b0c3..5301302fb531 100644
+--- a/drivers/mmc/host/bcm2835.c
++++ b/drivers/mmc/host/bcm2835.c
+@@ -286,6 +286,7 @@ static void bcm2835_reset(struct mmc_host *mmc)
+
+ if (host->dma_chan)
+ dmaengine_terminate_sync(host->dma_chan);
++ host->dma_chan = NULL;
+ bcm2835_reset_internal(host);
+ }
+
+@@ -846,6 +847,8 @@ static void bcm2835_timeout(struct work_struct *work)
+ dev_err(dev, "timeout waiting for hardware interrupt.\n");
+ bcm2835_dumpregs(host);
+
++ bcm2835_reset(host->mmc);
++
+ if (host->data) {
+ host->data->error = -ETIMEDOUT;
+ bcm2835_finish_data(host);
+--
+2.19.1
+
--- /dev/null
+From 3833395f7cf65d9ae53a2034310c3b0951787ce5 Mon Sep 17 00:00:00 2001
+From: Adrian Hunter <adrian.hunter@intel.com>
+Date: Mon, 10 Dec 2018 10:56:24 +0200
+Subject: mmc: sdhci-of-esdhc: Fix timeout checks
+
+[ Upstream commit ea6d027312111c6d96309ad1a684b33cb37e6764 ]
+
+Always check the wait condition before returning timeout.
+
+Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
+Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/mmc/host/sdhci-of-esdhc.c | 16 ++++++++++++----
+ 1 file changed, 12 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
+index 8332f56e6c0d..7b7d077e40fd 100644
+--- a/drivers/mmc/host/sdhci-of-esdhc.c
++++ b/drivers/mmc/host/sdhci-of-esdhc.c
+@@ -481,8 +481,12 @@ static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ val = ESDHC_CLOCK_STABLE;
+- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
+- if (ktime_after(ktime_get(), timeout)) {
++ while (1) {
++ bool timedout = ktime_after(ktime_get(), timeout);
++
++ if (sdhci_readl(host, ESDHC_PRSSTAT) & val)
++ break;
++ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ break;
+@@ -558,8 +562,12 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)) {
+- if (ktime_after(ktime_get(), timeout)) {
++ while (1) {
++ bool timedout = ktime_after(ktime_get(), timeout);
++
++ if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
++ break;
++ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ return;
+--
+2.19.1
+
--- /dev/null
+From fe4c3ca057df345e31855e1c040d9696010fcbb1 Mon Sep 17 00:00:00 2001
+From: Adrian Hunter <adrian.hunter@intel.com>
+Date: Mon, 10 Dec 2018 10:56:26 +0200
+Subject: mmc: sdhci-xenon: Fix timeout checks
+
+[ Upstream commit 0e6e7c2ff397e1bbebc882ca3132148aaaef1ddd ]
+
+Always check the wait condition before returning timeout.
+
+Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
+Reviewed-by: Zhoujie Wu <zjwu@marvell.com>
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/mmc/host/sdhci-xenon-phy.c | 10 +++++++---
+ drivers/mmc/host/sdhci-xenon.c | 10 +++++++---
+ 2 files changed, 14 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
+index ec8794335241..82051f2b7191 100644
+--- a/drivers/mmc/host/sdhci-xenon-phy.c
++++ b/drivers/mmc/host/sdhci-xenon-phy.c
+@@ -357,9 +357,13 @@ static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
+
+ /* Wait max 32 ms */
+ timeout = ktime_add_ms(ktime_get(), 32);
+- while (!(sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
+- XENON_DLL_LOCK_STATE)) {
+- if (ktime_after(ktime_get(), timeout)) {
++ while (1) {
++ bool timedout = ktime_after(ktime_get(), timeout);
++
++ if (sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
++ XENON_DLL_LOCK_STATE)
++ break;
++ if (timedout) {
+ dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+ return -ETIMEDOUT;
+ }
+diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
+index 4d0791f6ec23..a0b5089b3274 100644
+--- a/drivers/mmc/host/sdhci-xenon.c
++++ b/drivers/mmc/host/sdhci-xenon.c
+@@ -34,9 +34,13 @@ static int xenon_enable_internal_clk(struct sdhci_host *host)
+ sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+- while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+- & SDHCI_CLOCK_INT_STABLE)) {
+- if (ktime_after(ktime_get(), timeout)) {
++ while (1) {
++ bool timedout = ktime_after(ktime_get(), timeout);
++
++ reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
++ if (reg & SDHCI_CLOCK_INT_STABLE)
++ break;
++ if (timedout) {
+ dev_err(mmc_dev(host->mmc), "Internal clock never stabilised.\n");
+ return -ETIMEDOUT;
+ }
+--
+2.19.1
+
--- /dev/null
+From 50451b7c062eb77d9717c4070bb97cdf47645ba9 Mon Sep 17 00:00:00 2001
+From: Sami Tolvanen <samitolvanen@google.com>
+Date: Tue, 23 Oct 2018 15:15:35 -0700
+Subject: modpost: validate symbol names also in find_elf_symbol
+
+[ Upstream commit 5818c683a619c534c113e1f66d24f636defc29bc ]
+
+If an ARM mapping symbol shares an address with a valid symbol,
+find_elf_symbol can currently return the mapping symbol instead, as the
+symbol is not validated. This can result in confusing warnings:
+
+ WARNING: vmlinux.o(.text+0x18f4028): Section mismatch in reference
+ from the function set_reset_devices() to the variable .init.text:$x.0
+
+This change adds a call to is_valid_name to find_elf_symbol, similarly
+to how it's already used in find_elf_symbol2.
+
+Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
+Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ scripts/mod/modpost.c | 50 ++++++++++++++++++++++---------------------
+ 1 file changed, 26 insertions(+), 24 deletions(-)
+
+diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
+index 18bc8738e989..e36a673833ae 100644
+--- a/scripts/mod/modpost.c
++++ b/scripts/mod/modpost.c
+@@ -1215,6 +1215,30 @@ static int secref_whitelist(const struct sectioncheck *mismatch,
+ return 1;
+ }
+
++static inline int is_arm_mapping_symbol(const char *str)
++{
++ return str[0] == '$' && strchr("axtd", str[1])
++ && (str[2] == '\0' || str[2] == '.');
++}
++
++/*
++ * If there's no name there, ignore it; likewise, ignore it if it's
++ * one of the magic symbols emitted used by current ARM tools.
++ *
++ * Otherwise if find_symbols_between() returns those symbols, they'll
++ * fail the whitelist tests and cause lots of false alarms ... fixable
++ * only by merging __exit and __init sections into __text, bloating
++ * the kernel (which is especially evil on embedded platforms).
++ */
++static inline int is_valid_name(struct elf_info *elf, Elf_Sym *sym)
++{
++ const char *name = elf->strtab + sym->st_name;
++
++ if (!name || !strlen(name))
++ return 0;
++ return !is_arm_mapping_symbol(name);
++}
++
+ /**
+ * Find symbol based on relocation record info.
+ * In some cases the symbol supplied is a valid symbol so
+@@ -1240,6 +1264,8 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
+ continue;
+ if (ELF_ST_TYPE(sym->st_info) == STT_SECTION)
+ continue;
++ if (!is_valid_name(elf, sym))
++ continue;
+ if (sym->st_value == addr)
+ return sym;
+ /* Find a symbol nearby - addr are maybe negative */
+@@ -1258,30 +1284,6 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
+ return NULL;
+ }
+
+-static inline int is_arm_mapping_symbol(const char *str)
+-{
+- return str[0] == '$' && strchr("axtd", str[1])
+- && (str[2] == '\0' || str[2] == '.');
+-}
+-
+-/*
+- * If there's no name there, ignore it; likewise, ignore it if it's
+- * one of the magic symbols emitted used by current ARM tools.
+- *
+- * Otherwise if find_symbols_between() returns those symbols, they'll
+- * fail the whitelist tests and cause lots of false alarms ... fixable
+- * only by merging __exit and __init sections into __text, bloating
+- * the kernel (which is especially evil on embedded platforms).
+- */
+-static inline int is_valid_name(struct elf_info *elf, Elf_Sym *sym)
+-{
+- const char *name = elf->strtab + sym->st_name;
+-
+- if (!name || !strlen(name))
+- return 0;
+- return !is_arm_mapping_symbol(name);
+-}
+-
+ /*
+ * Find symbols before or equal addr and after addr - in the section sec.
+ * If we find two symbols with equal offset prefer one with a valid name.
+--
+2.19.1
+
--- /dev/null
+From cd36a6941ddc6f3639673077b859236627a22d3b Mon Sep 17 00:00:00 2001
+From: Saeed Mahameed <saeedm@mellanox.com>
+Date: Mon, 19 Nov 2018 10:52:31 -0800
+Subject: net/mlx5: EQ, Use the right place to store/read IRQ affinity hint
+
+[ Upstream commit 1e86ace4c140fd5a693e266c9b23409358f25381 ]
+
+Currently the cpu affinity hint mask for completion EQs is stored and
+read from the wrong place, since reading and storing is done from the
+same index, there is no actual issue with that, but internal irq_info
+for completion EQs stars at MLX5_EQ_VEC_COMP_BASE offset in irq_info
+array, this patch changes the code to use the correct offset to store
+and read the IRQ affinity hint.
+
+Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
+Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
+Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
+Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 +-
+ drivers/net/ethernet/mellanox/mlx5/core/main.c | 14 ++++++++------
+ include/linux/mlx5/driver.h | 2 +-
+ 3 files changed, 10 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+index bf34264c734b..14bab8a5550d 100644
+--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
++++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+@@ -1605,7 +1605,7 @@ static void mlx5e_close_cq(struct mlx5e_cq *cq)
+
+ static int mlx5e_get_cpu(struct mlx5e_priv *priv, int ix)
+ {
+- return cpumask_first(priv->mdev->priv.irq_info[ix].mask);
++ return cpumask_first(priv->mdev->priv.irq_info[ix + MLX5_EQ_VEC_COMP_BASE].mask);
+ }
+
+ static int mlx5e_open_tx_cqs(struct mlx5e_channel *c,
+diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
+index e99f1382a4f0..558fc6a05e2a 100644
+--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
++++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
+@@ -619,18 +619,19 @@ u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev)
+ static int mlx5_irq_set_affinity_hint(struct mlx5_core_dev *mdev, int i)
+ {
+ struct mlx5_priv *priv = &mdev->priv;
+- int irq = pci_irq_vector(mdev->pdev, MLX5_EQ_VEC_COMP_BASE + i);
++ int vecidx = MLX5_EQ_VEC_COMP_BASE + i;
++ int irq = pci_irq_vector(mdev->pdev, vecidx);
+
+- if (!zalloc_cpumask_var(&priv->irq_info[i].mask, GFP_KERNEL)) {
++ if (!zalloc_cpumask_var(&priv->irq_info[vecidx].mask, GFP_KERNEL)) {
+ mlx5_core_warn(mdev, "zalloc_cpumask_var failed");
+ return -ENOMEM;
+ }
+
+ cpumask_set_cpu(cpumask_local_spread(i, priv->numa_node),
+- priv->irq_info[i].mask);
++ priv->irq_info[vecidx].mask);
+
+ if (IS_ENABLED(CONFIG_SMP) &&
+- irq_set_affinity_hint(irq, priv->irq_info[i].mask))
++ irq_set_affinity_hint(irq, priv->irq_info[vecidx].mask))
+ mlx5_core_warn(mdev, "irq_set_affinity_hint failed, irq 0x%.4x", irq);
+
+ return 0;
+@@ -638,11 +639,12 @@ static int mlx5_irq_set_affinity_hint(struct mlx5_core_dev *mdev, int i)
+
+ static void mlx5_irq_clear_affinity_hint(struct mlx5_core_dev *mdev, int i)
+ {
++ int vecidx = MLX5_EQ_VEC_COMP_BASE + i;
+ struct mlx5_priv *priv = &mdev->priv;
+- int irq = pci_irq_vector(mdev->pdev, MLX5_EQ_VEC_COMP_BASE + i);
++ int irq = pci_irq_vector(mdev->pdev, vecidx);
+
+ irq_set_affinity_hint(irq, NULL);
+- free_cpumask_var(priv->irq_info[i].mask);
++ free_cpumask_var(priv->irq_info[vecidx].mask);
+ }
+
+ static int mlx5_irq_set_affinity_hints(struct mlx5_core_dev *mdev)
+diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
+index fb677e4f902d..88f0c530fe9c 100644
+--- a/include/linux/mlx5/driver.h
++++ b/include/linux/mlx5/driver.h
+@@ -1195,7 +1195,7 @@ enum {
+ static inline const struct cpumask *
+ mlx5_get_vector_affinity_hint(struct mlx5_core_dev *dev, int vector)
+ {
+- return dev->priv.irq_info[vector].mask;
++ return dev->priv.irq_info[vector + MLX5_EQ_VEC_COMP_BASE].mask;
+ }
+
+ #endif /* MLX5_DRIVER_H */
+--
+2.19.1
+
--- /dev/null
+From e2b79c06c8213e28db7f2caf028d82bf85ef8c4a Mon Sep 17 00:00:00 2001
+From: Chris Perl <cperl@janestreet.com>
+Date: Mon, 17 Dec 2018 10:56:38 -0500
+Subject: NFS: nfs_compare_mount_options always compare auth flavors.
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 594d1644cd59447f4fceb592448d5cd09eb09b5e ]
+
+This patch removes the check from nfs_compare_mount_options to see if a
+`sec' option was passed for the current mount before comparing auth
+flavors and instead just always compares auth flavors.
+
+Consider the following scenario:
+
+You have a server with the address 192.168.1.1 and two exports /export/a
+and /export/b. The first export supports `sys' and `krb5' security, the
+second just `sys'.
+
+Assume you start with no mounts from the server.
+
+The following results in EIOs being returned as the kernel nfs client
+incorrectly thinks it can share the underlying `struct nfs_server's:
+
+$ mkdir /tmp/{a,b}
+$ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a
+$ sudo mount -t nfs -o vers=3 192.168.1.1:/export/b /tmp/b
+$ df >/dev/null
+df: ‘/tmp/b’: Input/output error
+
+Signed-off-by: Chris Perl <cperl@janestreet.com>
+Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/nfs/super.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/fs/nfs/super.c b/fs/nfs/super.c
+index 38de09b08e96..3c4aeb83e1c4 100644
+--- a/fs/nfs/super.c
++++ b/fs/nfs/super.c
+@@ -2401,8 +2401,7 @@ static int nfs_compare_mount_options(const struct super_block *s, const struct n
+ goto Ebusy;
+ if (a->acdirmax != b->acdirmax)
+ goto Ebusy;
+- if (b->auth_info.flavor_len > 0 &&
+- clnt_a->cl_auth->au_flavor != clnt_b->cl_auth->au_flavor)
++ if (clnt_a->cl_auth->au_flavor != clnt_b->cl_auth->au_flavor)
+ goto Ebusy;
+ return 1;
+ Ebusy:
+--
+2.19.1
+
--- /dev/null
+From 0a436c557fe921069d6be013aaad95943a689124 Mon Sep 17 00:00:00 2001
+From: "J. Bruce Fields" <bfields@redhat.com>
+Date: Tue, 27 Nov 2018 15:54:17 -0500
+Subject: nfsd4: fix crash on writing v4_end_grace before nfsd startup
+
+[ Upstream commit 62a063b8e7d1db684db3f207261a466fa3194e72 ]
+
+Anatoly Trosinenko reports that this:
+
+1) Checkout fresh master Linux branch (tested with commit e195ca6cb)
+2) Copy x84_64-config-4.14 to .config, then enable NFS server v4 and build
+3) From `kvm-xfstests shell`:
+
+results in NULL dereference in locks_end_grace.
+
+Check that nfsd has been started before trying to end the grace period.
+
+Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
+Signed-off-by: J. Bruce Fields <bfields@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/nfsd/nfsctl.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
+index 6493df6b1bd5..4b8ebcc6b183 100644
+--- a/fs/nfsd/nfsctl.c
++++ b/fs/nfsd/nfsctl.c
+@@ -1126,6 +1126,8 @@ static ssize_t write_v4_end_grace(struct file *file, char *buf, size_t size)
+ case 'Y':
+ case 'y':
+ case '1':
++ if (nn->nfsd_serv)
++ return -EBUSY;
+ nfsd4_end_grace(nn);
+ break;
+ default:
+--
+2.19.1
+
--- /dev/null
+From f0943e29cbcf5bfeb31409bf2f7401d812db10a7 Mon Sep 17 00:00:00 2001
+From: Kangjie Lu <kjlu@umn.edu>
+Date: Tue, 25 Dec 2018 01:56:14 -0600
+Subject: niu: fix missing checks of niu_pci_eeprom_read
+
+[ Upstream commit 26fd962bde0b15e54234fe762d86bc0349df1de4 ]
+
+niu_pci_eeprom_read() may fail, so we should check its return value
+before using the read data.
+
+Signed-off-by: Kangjie Lu <kjlu@umn.edu>
+Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/ethernet/sun/niu.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
+index e92f41d20a2c..411a69bea1d4 100644
+--- a/drivers/net/ethernet/sun/niu.c
++++ b/drivers/net/ethernet/sun/niu.c
+@@ -8119,6 +8119,8 @@ static int niu_pci_vpd_scan_props(struct niu *np, u32 start, u32 end)
+ start += 3;
+
+ prop_len = niu_pci_eeprom_read(np, start + 4);
++ if (prop_len < 0)
++ return prop_len;
+ err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
+ if (err < 0)
+ return err;
+@@ -8163,8 +8165,12 @@ static int niu_pci_vpd_scan_props(struct niu *np, u32 start, u32 end)
+ netif_printk(np, probe, KERN_DEBUG, np->dev,
+ "VPD_SCAN: Reading in property [%s] len[%d]\n",
+ namebuf, prop_len);
+- for (i = 0; i < prop_len; i++)
+- *prop_buf++ = niu_pci_eeprom_read(np, off + i);
++ for (i = 0; i < prop_len; i++) {
++ err = niu_pci_eeprom_read(np, off + i);
++ if (err >= 0)
++ *prop_buf = err;
++ ++prop_buf;
++ }
+ }
+
+ start += len;
+--
+2.19.1
+
--- /dev/null
+From 0c62d16a30887817e99877f76083144e5d845c49 Mon Sep 17 00:00:00 2001
+From: Junxiao Bi <junxiao.bi@oracle.com>
+Date: Fri, 28 Dec 2018 00:32:57 -0800
+Subject: ocfs2: don't clear bh uptodate for block read
+
+[ Upstream commit 70306d9dce75abde855cefaf32b3f71eed8602a3 ]
+
+For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag
+and submit the io, second wait io done, last check whether bh uptodate, if
+not return io error.
+
+If two sync io for the same bh were issued, it could be the first io done
+and set uptodate flag, but just before check that flag, the second io came
+in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io
+will return IO error.
+
+Indeed it's not necessary to clear uptodate flag, as the io end handler
+end_buffer_read_sync() will set or clear it based on io succeed or failed.
+
+The following message was found from a nfs server but the underlying
+storage returned no error.
+
+[4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5
+[4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5
+[4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5
+[4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5
+[4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5
+
+Same issue in non sync read ocfs2_read_blocks(), fixed it as well.
+
+Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.com
+Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
+Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
+Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
+Cc: Joel Becker <jlbec@evilplan.org>
+Cc: Joseph Qi <jiangqi903@gmail.com>
+Cc: Jun Piao <piaojun@huawei.com>
+Cc: Mark Fasheh <mfasheh@versity.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/ocfs2/buffer_head_io.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
+index 1d098c3c00e0..9f8250df99f1 100644
+--- a/fs/ocfs2/buffer_head_io.c
++++ b/fs/ocfs2/buffer_head_io.c
+@@ -152,7 +152,6 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
+ #endif
+ }
+
+- clear_buffer_uptodate(bh);
+ get_bh(bh); /* for end_buffer_read_sync() */
+ bh->b_end_io = end_buffer_read_sync;
+ submit_bh(REQ_OP_READ, 0, bh);
+@@ -306,7 +305,6 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
+ continue;
+ }
+
+- clear_buffer_uptodate(bh);
+ get_bh(bh); /* for end_buffer_read_sync() */
+ if (validate)
+ set_buffer_needs_validate(bh);
+--
+2.19.1
+
--- /dev/null
+From 3a2f8d59d634f9772a5aab9548d136d0ab981e22 Mon Sep 17 00:00:00 2001
+From: Larry Chen <lchen@suse.com>
+Date: Fri, 28 Dec 2018 00:32:46 -0800
+Subject: ocfs2: improve ocfs2 Makefile
+
+[ Upstream commit 9e6aea22802b5684c7e1d69822aeb0844dd01953 ]
+
+Included file path was hard-wired in the ocfs2 makefile, which might
+causes some confusion when compiling ocfs2 as an external module.
+
+Say if we compile ocfs2 module as following.
+cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2
+cd /other/dir/ocfs2
+make -C /path/to/kernel_source M=`pwd` modules
+
+Acutally, the compiler wil try to find included file in
+/kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2.
+
+To fix this little bug, we introduce the var $(src) provided by kbuild.
+$(src) means the absolute path of the running kbuild file.
+
+Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.com
+Signed-off-by: Larry Chen <lchen@suse.com>
+Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
+Cc: Mark Fasheh <mark@fasheh.com>
+Cc: Joel Becker <jlbec@evilplan.org>
+Cc: Junxiao Bi <junxiao.bi@oracle.com>
+Cc: Joseph Qi <jiangqi903@gmail.com>
+Cc: Changwei Ge <ge.changwei@h3c.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/ocfs2/Makefile | 2 +-
+ fs/ocfs2/dlm/Makefile | 2 +-
+ fs/ocfs2/dlmfs/Makefile | 2 +-
+ 3 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/fs/ocfs2/Makefile b/fs/ocfs2/Makefile
+index 99ee093182cb..cc9b32b9db7c 100644
+--- a/fs/ocfs2/Makefile
++++ b/fs/ocfs2/Makefile
+@@ -1,5 +1,5 @@
+ # SPDX-License-Identifier: GPL-2.0
+-ccflags-y := -Ifs/ocfs2
++ccflags-y := -I$(src)
+
+ obj-$(CONFIG_OCFS2_FS) += \
+ ocfs2.o \
+diff --git a/fs/ocfs2/dlm/Makefile b/fs/ocfs2/dlm/Makefile
+index bd1aab1f49a4..ef2854422a6e 100644
+--- a/fs/ocfs2/dlm/Makefile
++++ b/fs/ocfs2/dlm/Makefile
+@@ -1,4 +1,4 @@
+-ccflags-y := -Ifs/ocfs2
++ccflags-y := -I$(src)/..
+
+ obj-$(CONFIG_OCFS2_FS_O2CB) += ocfs2_dlm.o
+
+diff --git a/fs/ocfs2/dlmfs/Makefile b/fs/ocfs2/dlmfs/Makefile
+index eed3db8c5b49..33431a0296a3 100644
+--- a/fs/ocfs2/dlmfs/Makefile
++++ b/fs/ocfs2/dlmfs/Makefile
+@@ -1,4 +1,4 @@
+-ccflags-y := -Ifs/ocfs2
++ccflags-y := -I$(src)/..
+
+ obj-$(CONFIG_OCFS2_FS) += ocfs2_dlmfs.o
+
+--
+2.19.1
+
--- /dev/null
+From a1cd749f049a318a4ba33896f34604f383b24ae0 Mon Sep 17 00:00:00 2001
+From: Viresh Kumar <viresh.kumar@linaro.org>
+Date: Tue, 11 Dec 2018 16:32:47 +0530
+Subject: OPP: Use opp_table->regulators to verify no regulator case
+
+[ Upstream commit 90e3577b5feb42bac1269e16bb3d2bdd8f6df40f ]
+
+The value of opp_table->regulator_count is not very consistent right now
+and it may end up being 0 while we do have a "opp-microvolt" property in
+the OPP table. It was kept that way as we used to check if any
+regulators are set with the OPP core for a device or not using value of
+regulator_count.
+
+Lets use opp_table->regulators for that purpose as the meaning of
+regulator_count is going to change in the later patches.
+
+Reported-by: Quentin Perret <quentin.perret@arm.com>
+Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/base/power/opp/core.c | 11 +++++++----
+ 1 file changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
+index d4862775b9f6..d5e7e8cc4f22 100644
+--- a/drivers/base/power/opp/core.c
++++ b/drivers/base/power/opp/core.c
+@@ -192,12 +192,12 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
+ if (IS_ERR(opp_table))
+ return 0;
+
+- count = opp_table->regulator_count;
+-
+ /* Regulator may not be required for the device */
+- if (!count)
++ if (!opp_table->regulators)
+ goto put_opp_table;
+
++ count = opp_table->regulator_count;
++
+ uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL);
+ if (!uV)
+ goto put_opp_table;
+@@ -921,6 +921,9 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
+ struct regulator *reg;
+ int i;
+
++ if (!opp_table->regulators)
++ return true;
++
+ for (i = 0; i < opp_table->regulator_count; i++) {
+ reg = opp_table->regulators[i];
+
+@@ -1226,7 +1229,7 @@ static int _allocate_set_opp_data(struct opp_table *opp_table)
+ struct dev_pm_set_opp_data *data;
+ int len, count = opp_table->regulator_count;
+
+- if (WARN_ON(!count))
++ if (WARN_ON(!opp_table->regulators))
+ return -EINVAL;
+
+ /* space for set_opp_data */
+--
+2.19.1
+
--- /dev/null
+From 589ddbb32e8bd30a05bcdab070642c2a814b1daa Mon Sep 17 00:00:00 2001
+From: Dennis Zhou <dennis@kernel.org>
+Date: Tue, 18 Dec 2018 08:42:27 -0800
+Subject: percpu: convert spin_lock_irq to spin_lock_irqsave.
+
+[ Upstream commit 6ab7d47bcbf0144a8cb81536c2cead4cde18acfe ]
+
+From Michael Cree:
+ "Bisection lead to commit b38d08f3181c ("percpu: restructure
+ locking") as being the cause of lockups at initial boot on
+ the kernel built for generic Alpha.
+
+ On a suggestion by Tejun Heo that:
+
+ So, the only thing I can think of is that it's calling
+ spin_unlock_irq() while irq handling isn't set up yet.
+ Can you please try the followings?
+
+ 1. Convert all spin_[un]lock_irq() to
+ spin_lock_irqsave/unlock_irqrestore()."
+
+Fixes: b38d08f3181c ("percpu: restructure locking")
+Reported-and-tested-by: Michael Cree <mcree@orcon.net.nz>
+Acked-by: Tejun Heo <tj@kernel.org>
+Signed-off-by: Dennis Zhou <dennis@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ mm/percpu-km.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/mm/percpu-km.c b/mm/percpu-km.c
+index 0d88d7bd5706..c22d959105b6 100644
+--- a/mm/percpu-km.c
++++ b/mm/percpu-km.c
+@@ -50,6 +50,7 @@ static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp)
+ const int nr_pages = pcpu_group_sizes[0] >> PAGE_SHIFT;
+ struct pcpu_chunk *chunk;
+ struct page *pages;
++ unsigned long flags;
+ int i;
+
+ chunk = pcpu_alloc_chunk(gfp);
+@@ -68,9 +69,9 @@ static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp)
+ chunk->data = pages;
+ chunk->base_addr = page_address(pages) - pcpu_group_offsets[0];
+
+- spin_lock_irq(&pcpu_lock);
++ spin_lock_irqsave(&pcpu_lock, flags);
+ pcpu_chunk_populated(chunk, 0, nr_pages, false);
+- spin_unlock_irq(&pcpu_lock);
++ spin_unlock_irqrestore(&pcpu_lock, flags);
+
+ pcpu_stats_chunk_alloc();
+ trace_percpu_create_chunk(chunk->base_addr);
+--
+2.19.1
+
--- /dev/null
+From 15a1b8ef0ca44efa2bd21c93438924ee6cb7794b Mon Sep 17 00:00:00 2001
+From: Arnaldo Carvalho de Melo <acme@redhat.com>
+Date: Thu, 6 Dec 2018 11:02:57 -0300
+Subject: perf header: Fix unchecked usage of strncpy()
+
+[ Upstream commit 7572588085a13d5db02bf159542189f52fdb507e ]
+
+The strncpy() function may leave the destination string buffer
+unterminated, better use strlcpy() that we have a __weak fallback
+implementation for systems without it.
+
+This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
+
+ util/header.c: In function 'perf_event__synthesize_event_update_unit':
+ util/header.c:3586:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
+ strncpy(ev->data, evsel->unit, size);
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ util/header.c:3579:16: note: length computed here
+ size_t size = strlen(evsel->unit);
+ ^~~~~~~~~~~~~~~~~~~
+
+Cc: Adrian Hunter <adrian.hunter@intel.com>
+Cc: Jiri Olsa <jolsa@kernel.org>
+Cc: Namhyung Kim <namhyung@kernel.org>
+Fixes: a6e5281780d1 ("perf tools: Add event_update event unit type")
+Link: https://lkml.kernel.org/n/tip-fiikh5nay70bv4zskw2aa858@git.kernel.org
+Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/perf/util/header.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
+index 1ceb332575bd..696f2654826b 100644
+--- a/tools/perf/util/header.c
++++ b/tools/perf/util/header.c
+@@ -3132,7 +3132,7 @@ perf_event__synthesize_event_update_unit(struct perf_tool *tool,
+ if (ev == NULL)
+ return -ENOMEM;
+
+- strncpy(ev->data, evsel->unit, size);
++ strlcpy(ev->data, evsel->unit, size + 1);
+ err = process(tool, (union perf_event *)ev, NULL, NULL);
+ free(ev);
+ return err;
+--
+2.19.1
+
--- /dev/null
+From b428feac05c779813b97706574f4474f3285ba14 Mon Sep 17 00:00:00 2001
+From: Arnaldo Carvalho de Melo <acme@redhat.com>
+Date: Thu, 6 Dec 2018 11:50:08 -0300
+Subject: perf probe: Fix unchecked usage of strncpy()
+
+[ Upstream commit bef0b8970f27da5ca223e522a174d03e2587761d ]
+
+The strncpy() function may leave the destination string buffer
+unterminated, better use strlcpy() that we have a __weak fallback
+implementation for systems without it.
+
+In this case the 'target' buffer is coming from a list of build-ids that
+are expected to have a len of at most (SBUILD_ID_SIZE - 1) chars, so
+probably we're safe, but since we're using strncpy() here, use strlcpy()
+instead to provide the intended safety checking without the using the
+problematic strncpy() function.
+
+This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
+
+ util/probe-file.c: In function 'probe_cache__open.isra.5':
+ util/probe-file.c:427:3: error: 'strncpy' specified bound 41 equals destination size [-Werror=stringop-truncation]
+ strncpy(sbuildid, target, SBUILD_ID_SIZE);
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ cc1: all warnings being treated as errors
+
+Cc: Adrian Hunter <adrian.hunter@intel.com>
+Cc: Jiri Olsa <jolsa@kernel.org>
+Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
+Cc: Namhyung Kim <namhyung@kernel.org>
+Fixes: 1f3736c9c833 ("perf probe: Show all cached probes")
+Link: https://lkml.kernel.org/n/tip-l7n8ggc9kl38qtdlouke5yp5@git.kernel.org
+Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/perf/util/probe-file.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/perf/util/probe-file.c b/tools/perf/util/probe-file.c
+index cdf8d83a484c..6ab9230ce8ee 100644
+--- a/tools/perf/util/probe-file.c
++++ b/tools/perf/util/probe-file.c
+@@ -424,7 +424,7 @@ static int probe_cache__open(struct probe_cache *pcache, const char *target,
+
+ if (target && build_id_cache__cached(target)) {
+ /* This is a cached buildid */
+- strncpy(sbuildid, target, SBUILD_ID_SIZE);
++ strlcpy(sbuildid, target, SBUILD_ID_SIZE);
+ dir_name = build_id_cache__linkname(sbuildid, NULL, 0);
+ goto found;
+ }
+--
+2.19.1
+
--- /dev/null
+From 0e1e57d999d1a0b8ed79ddbd6b3ff51fab600e78 Mon Sep 17 00:00:00 2001
+From: Adrian Hunter <adrian.hunter@intel.com>
+Date: Thu, 22 Nov 2018 16:04:56 +0200
+Subject: perf test: Fix perf_event_attr test failure
+
+[ Upstream commit 741dad88dde296999da30332157ca47f0543747d ]
+
+Fix inconsistent use of tabs and spaces error:
+
+ # perf test 16 -v
+ 16: Setup struct perf_event_attr :
+ --- start ---
+ test child forked, pid 20224
+ File "/usr/libexec/perf-core/tests/attr.py", line 119
+ log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
+ ^
+ TabError: inconsistent use of tabs and spaces in indentation
+ test child finished with -1
+ ---- end ----
+ Setup struct perf_event_attr: FAILED!
+
+Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
+Cc: Jiri Olsa <jolsa@redhat.com>
+Link: http://lkml.kernel.org/r/20181122140456.16817-1-adrian.hunter@intel.com
+Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/perf/tests/attr.py | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/perf/tests/attr.py b/tools/perf/tests/attr.py
+index ff9b60b99f52..44090a9a19f3 100644
+--- a/tools/perf/tests/attr.py
++++ b/tools/perf/tests/attr.py
+@@ -116,7 +116,7 @@ class Event(dict):
+ if not self.has_key(t) or not other.has_key(t):
+ continue
+ if not data_equal(self[t], other[t]):
+- log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
++ log.warning("expected %s=%s, got %s" % (t, self[t], other[t]))
+
+ # Test file description needs to have following sections:
+ # [config]
+--
+2.19.1
+
--- /dev/null
+From 10a8b830453666085a5224e6b40ee32b97d7d497 Mon Sep 17 00:00:00 2001
+From: Pu Wen <puwen@hygon.cn>
+Date: Mon, 12 Nov 2018 15:40:51 +0800
+Subject: perf tools: Add Hygon Dhyana support
+
+[ Upstream commit 4787eff3fa88f62fede6ed7afa06477ae6bf984d ]
+
+The tool perf is useful for the performance analysis on the Hygon Dhyana
+platform. But right now there is no Hygon support for it to analyze the
+KVM guest os data. So add Hygon Dhyana support to it by checking vendor
+string to share the code path of AMD.
+
+Signed-off-by: Pu Wen <puwen@hygon.cn>
+Acked-by: Borislav Petkov <bp@suse.de>
+Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Cc: Jiri Olsa <jolsa@kernel.org>
+Cc: Namhyung Kim <namhyung@kernel.org>
+Cc: Peter Zijlstra <peterz@infradead.org>
+Cc: Thomas Gleixner <tglx@linutronix.de>
+Link: http://lkml.kernel.org/r/1542008451-31735-1-git-send-email-puwen@hygon.cn
+Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/perf/arch/x86/util/kvm-stat.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/perf/arch/x86/util/kvm-stat.c b/tools/perf/arch/x86/util/kvm-stat.c
+index b32409a0e546..081353d7b095 100644
+--- a/tools/perf/arch/x86/util/kvm-stat.c
++++ b/tools/perf/arch/x86/util/kvm-stat.c
+@@ -156,7 +156,7 @@ int cpu_isa_init(struct perf_kvm_stat *kvm, const char *cpuid)
+ if (strstr(cpuid, "Intel")) {
+ kvm->exit_reasons = vmx_exit_reasons;
+ kvm->exit_reasons_isa = "VMX";
+- } else if (strstr(cpuid, "AMD")) {
++ } else if (strstr(cpuid, "AMD") || strstr(cpuid, "Hygon")) {
+ kvm->exit_reasons = svm_exit_reasons;
+ kvm->exit_reasons_isa = "SVM";
+ } else
+--
+2.19.1
+
--- /dev/null
+From 4f70942ff3d532b37c2ff900f13bd5e312a0b399 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Thu, 4 Oct 2018 20:28:47 +0800
+Subject: phy: sun4i-usb: add support for missing USB PHY index
+
+[ Upstream commit 2659392e5c08dff626e6db1d739adff58a94604d ]
+
+The new Allwinner H6 SoC's USB2 PHY has two holes -- USB1 (which is a
+3.0 port with dedicated PHY) and USB2 (which doesn't exist at all).
+
+Add support for this kind of missing USB PHY index.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/phy/allwinner/phy-sun4i-usb.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
+index afedb8cd1990..d1ccff527756 100644
+--- a/drivers/phy/allwinner/phy-sun4i-usb.c
++++ b/drivers/phy/allwinner/phy-sun4i-usb.c
+@@ -125,6 +125,7 @@ struct sun4i_usb_phy_cfg {
+ bool dedicated_clocks;
+ bool enable_pmu_unk1;
+ bool phy0_dual_route;
++ int missing_phys;
+ };
+
+ struct sun4i_usb_phy_data {
+@@ -645,6 +646,9 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
+ if (args->args[0] >= data->cfg->num_phys)
+ return ERR_PTR(-ENODEV);
+
++ if (data->cfg->missing_phys & BIT(args->args[0]))
++ return ERR_PTR(-ENODEV);
++
+ return data->phys[args->args[0]].phy;
+ }
+
+@@ -740,6 +744,9 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
+ struct sun4i_usb_phy *phy = data->phys + i;
+ char name[16];
+
++ if (data->cfg->missing_phys & BIT(i))
++ continue;
++
+ snprintf(name, sizeof(name), "usb%d_vbus", i);
+ phy->vbus = devm_regulator_get_optional(dev, name);
+ if (IS_ERR(phy->vbus)) {
+--
+2.19.1
+
--- /dev/null
+From c69e65cfa2f434730f63867a12139f3fbe6fc49e Mon Sep 17 00:00:00 2001
+From: Lukas Wunner <lukas@wunner.de>
+Date: Sat, 27 Oct 2018 10:15:33 +0200
+Subject: pinctrl: bcm2835: Use raw spinlock for RT compatibility
+
+[ Upstream commit 3c7b30f704b6f5e53eed6bf89cf2c8d1b38b02c0 ]
+
+The BCM2835 pinctrl driver acquires a spinlock in its ->irq_enable,
+->irq_disable and ->irq_set_type callbacks. Spinlocks become sleeping
+locks with CONFIG_PREEMPT_RT_FULL=y, therefore invocation of one of the
+callbacks in atomic context may cause a hard lockup if at least two GPIO
+pins in the same bank are used as interrupts. The issue doesn't occur
+with just a single interrupt pin per bank because the lock is never
+contended. I'm experiencing such lockups with GPIO 8 and 28 used as
+level-triggered interrupts, i.e. with ->irq_disable being invoked on
+reception of every IRQ.
+
+The critical section protected by the spinlock is very small (one bitop
+and one RMW of an MMIO register), hence converting to a raw spinlock
+seems a better trade-off than converting the driver to threaded IRQ
+handling (which would increase latency to handle an interrupt).
+
+Cc: Mathias Duckeck <m.duckeck@kunbus.de>
+Signed-off-by: Lukas Wunner <lukas@wunner.de>
+Acked-by: Julia Cartwright <julia@ni.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/bcm/pinctrl-bcm2835.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+index ff782445dfb7..e72bf2502eca 100644
+--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+@@ -92,7 +92,7 @@ struct bcm2835_pinctrl {
+ struct gpio_chip gpio_chip;
+ struct pinctrl_gpio_range gpio_range;
+
+- spinlock_t irq_lock[BCM2835_NUM_BANKS];
++ raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
+ };
+
+ /* pins are just named GPIO0..GPIO53 */
+@@ -471,10 +471,10 @@ static void bcm2835_gpio_irq_enable(struct irq_data *data)
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+
+- spin_lock_irqsave(&pc->irq_lock[bank], flags);
++ raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ set_bit(offset, &pc->enabled_irq_map[bank]);
+ bcm2835_gpio_irq_config(pc, gpio, true);
+- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
++ raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+ }
+
+ static void bcm2835_gpio_irq_disable(struct irq_data *data)
+@@ -486,12 +486,12 @@ static void bcm2835_gpio_irq_disable(struct irq_data *data)
+ unsigned bank = GPIO_REG_OFFSET(gpio);
+ unsigned long flags;
+
+- spin_lock_irqsave(&pc->irq_lock[bank], flags);
++ raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ bcm2835_gpio_irq_config(pc, gpio, false);
+ /* Clear events that were latched prior to clearing event sources */
+ bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+ clear_bit(offset, &pc->enabled_irq_map[bank]);
+- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
++ raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+ }
+
+ static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
+@@ -594,7 +594,7 @@ static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+ unsigned long flags;
+ int ret;
+
+- spin_lock_irqsave(&pc->irq_lock[bank], flags);
++ raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
+
+ if (test_bit(offset, &pc->enabled_irq_map[bank]))
+ ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
+@@ -606,7 +606,7 @@ static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
+ else
+ irq_set_handler_locked(data, handle_level_irq);
+
+- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
++ raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+
+ return ret;
+ }
+@@ -1021,7 +1021,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
+ for_each_set_bit(offset, &events, 32)
+ bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
+
+- spin_lock_init(&pc->irq_lock[i]);
++ raw_spin_lock_init(&pc->irq_lock[i]);
+ }
+
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
+--
+2.19.1
+
--- /dev/null
+From faa61cac7789d0544a7c8c29e7b1b95633223c14 Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Date: Sun, 9 Dec 2018 20:50:50 +0100
+Subject: pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
+
+[ Upstream commit 42f9b48cc5402be11d2364275eb18c257d2a79e8 ]
+
+The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
+only belong to the pin controller in the AO domain. With the current
+definition these pins cannot be referred to in .dts files as group
+(which is possible on GXBB and GXL for example).
+
+Add a separate "gpio_aobus" function to fix the mapping between the pin
+controller and the GPIO pins in the AO domain. This is similar to how
+the GXBB and GXL drivers implement this functionality.
+
+Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/meson/pinctrl-meson8.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
+index 970f6f14502c..591b01657378 100644
+--- a/drivers/pinctrl/meson/pinctrl-meson8.c
++++ b/drivers/pinctrl/meson/pinctrl-meson8.c
+@@ -808,7 +808,9 @@ static const char * const gpio_groups[] = {
+ "BOOT_5", "BOOT_6", "BOOT_7", "BOOT_8", "BOOT_9",
+ "BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
+ "BOOT_15", "BOOT_16", "BOOT_17", "BOOT_18",
++};
+
++static const char * const gpio_aobus_groups[] = {
+ "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
+ "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
+ "GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
+@@ -1030,6 +1032,7 @@ static struct meson_pmx_func meson8_cbus_functions[] = {
+ };
+
+ static struct meson_pmx_func meson8_aobus_functions[] = {
++ FUNCTION(gpio_aobus),
+ FUNCTION(uart_ao),
+ FUNCTION(remote),
+ FUNCTION(i2c_slave_ao),
+--
+2.19.1
+
--- /dev/null
+From b7a96c26d37307b142fe7301fe1141dd2739e7ed Mon Sep 17 00:00:00 2001
+From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Date: Sun, 9 Dec 2018 20:50:51 +0100
+Subject: pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
+
+[ Upstream commit 2b745ac3cceb8fc1d9985990c8241a821ea97e53 ]
+
+The GPIOAO pins (as well as the two exotic GPIO_BSD_EN and GPIO_TEST_N)
+only belong to the pin controller in the AO domain. With the current
+definition these pins cannot be referred to in .dts files as group
+(which is possible on GXBB and GXL for example).
+
+Add a separate "gpio_aobus" function to fix the mapping between the pin
+controller and the GPIO pins in the AO domain. This is similar to how
+the GXBB and GXL drivers implement this functionality.
+
+Fixes: 9dab1868ec0db4 ("pinctrl: amlogic: Make driver independent from two-domain configuration")
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/meson/pinctrl-meson8b.c | 13 ++++++++-----
+ 1 file changed, 8 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
+index 71f216b5b0b9..a6fff215e60f 100644
+--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
++++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
+@@ -649,16 +649,18 @@ static const char * const gpio_groups[] = {
+ "BOOT_10", "BOOT_11", "BOOT_12", "BOOT_13", "BOOT_14",
+ "BOOT_15", "BOOT_16", "BOOT_17", "BOOT_18",
+
+- "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
+- "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
+- "GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
+- "GPIOAO_12", "GPIOAO_13", "GPIO_BSD_EN", "GPIO_TEST_N",
+-
+ "DIF_0_P", "DIF_0_N", "DIF_1_P", "DIF_1_N",
+ "DIF_2_P", "DIF_2_N", "DIF_3_P", "DIF_3_N",
+ "DIF_4_P", "DIF_4_N"
+ };
+
++static const char * const gpio_aobus_groups[] = {
++ "GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3",
++ "GPIOAO_4", "GPIOAO_5", "GPIOAO_6", "GPIOAO_7",
++ "GPIOAO_8", "GPIOAO_9", "GPIOAO_10", "GPIOAO_11",
++ "GPIOAO_12", "GPIOAO_13", "GPIO_BSD_EN", "GPIO_TEST_N"
++};
++
+ static const char * const sd_a_groups[] = {
+ "sd_d0_a", "sd_d1_a", "sd_d2_a", "sd_d3_a", "sd_clk_a",
+ "sd_cmd_a"
+@@ -874,6 +876,7 @@ static struct meson_pmx_func meson8b_cbus_functions[] = {
+ };
+
+ static struct meson_pmx_func meson8b_aobus_functions[] = {
++ FUNCTION(gpio_aobus),
+ FUNCTION(uart_ao),
+ FUNCTION(uart_ao_b),
+ FUNCTION(i2c_slave_ao),
+--
+2.19.1
+
--- /dev/null
+From 8dbef8479caea63f056744dbf667671ee28d49ff Mon Sep 17 00:00:00 2001
+From: Nicholas Mc Guire <hofrat@osadl.org>
+Date: Sun, 2 Dec 2018 11:04:17 +0100
+Subject: pinctrl: sx150x: handle failure case of devm_kstrdup
+
+[ Upstream commit a9d9f6b83f1bb05da849b3540e6d1f70ef1c2343 ]
+
+devm_kstrdup() may return NULL if internal allocation failed.
+Thus using label, name is unsafe without checking. Therefor
+in the unlikely case of allocation failure, sx150x_probe() simply
+returns -ENOMEM.
+
+Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
+Fixes: 9e80f9064e73 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver")
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pinctrl/pinctrl-sx150x.c | 11 ++++++++---
+ 1 file changed, 8 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
+index 70a0228f4e7f..2d0f4f760326 100644
+--- a/drivers/pinctrl/pinctrl-sx150x.c
++++ b/drivers/pinctrl/pinctrl-sx150x.c
+@@ -1166,7 +1166,6 @@ static int sx150x_probe(struct i2c_client *client,
+ }
+
+ /* Register GPIO controller */
+- pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL);
+ pctl->gpio.base = -1;
+ pctl->gpio.ngpio = pctl->data->npins;
+ pctl->gpio.get_direction = sx150x_gpio_get_direction;
+@@ -1180,6 +1179,10 @@ static int sx150x_probe(struct i2c_client *client,
+ pctl->gpio.of_node = dev->of_node;
+ #endif
+ pctl->gpio.can_sleep = true;
++ pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL);
++ if (!pctl->gpio.label)
++ return -ENOMEM;
++
+ /*
+ * Setting multiple pins is not safe when all pins are not
+ * handled by the same regmap register. The oscio pin (present
+@@ -1200,13 +1203,15 @@ static int sx150x_probe(struct i2c_client *client,
+
+ /* Add Interrupt support if an irq is specified */
+ if (client->irq > 0) {
+- pctl->irq_chip.name = devm_kstrdup(dev, client->name,
+- GFP_KERNEL);
+ pctl->irq_chip.irq_mask = sx150x_irq_mask;
+ pctl->irq_chip.irq_unmask = sx150x_irq_unmask;
+ pctl->irq_chip.irq_set_type = sx150x_irq_set_type;
+ pctl->irq_chip.irq_bus_lock = sx150x_irq_bus_lock;
+ pctl->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock;
++ pctl->irq_chip.name = devm_kstrdup(dev, client->name,
++ GFP_KERNEL);
++ if (!pctl->irq_chip.name)
++ return -ENOMEM;
+
+ pctl->irq.masked = ~0;
+ pctl->irq.sense = 0;
+--
+2.19.1
+
--- /dev/null
+From e6eee5773c013dcc25613f0a29f2a19e8037e061 Mon Sep 17 00:00:00 2001
+From: Brian Norris <briannorris@chromium.org>
+Date: Wed, 7 Nov 2018 18:49:39 -0800
+Subject: platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup
+
+[ Upstream commit 6ad16b78a039b45294b1ad5d69c14ac57b2fe706 ]
+
+EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of
+reasons, and there are very few cases in which they should be treated as
+wakeup interrupts (particularly, when a certain
+MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the
+mainline cros_ec_sensor driver yet). Most of the time, they are benign
+sensor readings. In any case, the top-level cros_ec device doesn't know
+enough to determine that they should wake the system, and so it should
+not report the event. This would be the job of the cros_ec_sensors
+driver to parse.
+
+This patch adds checks to cros_ec_get_next_event() such that it doesn't
+signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO.
+
+This patch is particularly relevant on devices like Scarlet (Rockchip
+RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware
+reports sensor events much more frequently. This was causing
+/sys/power/wakeup_count to increase very frequently, often needlessly
+interrupting our ability to suspend the system.
+
+Signed-off-by: Brian Norris <briannorris@chromium.org>
+Signed-off-by: Benson Leung <bleung@chromium.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/platform/chrome/cros_ec_proto.c | 18 +++++++++++++++---
+ 1 file changed, 15 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
+index e7bbdf947bbc..2ac4a7178470 100644
+--- a/drivers/platform/chrome/cros_ec_proto.c
++++ b/drivers/platform/chrome/cros_ec_proto.c
+@@ -551,6 +551,7 @@ static int get_keyboard_state_event(struct cros_ec_device *ec_dev)
+
+ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event)
+ {
++ u8 event_type;
+ u32 host_event;
+ int ret;
+
+@@ -570,11 +571,22 @@ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event)
+ return ret;
+
+ if (wake_event) {
++ event_type = ec_dev->event_data.event_type;
+ host_event = cros_ec_get_host_event(ec_dev);
+
+- /* Consider non-host_event as wake event */
+- *wake_event = !host_event ||
+- !!(host_event & ec_dev->host_event_wake_mask);
++ /*
++ * Sensor events need to be parsed by the sensor sub-device.
++ * Defer them, and don't report the wakeup here.
++ */
++ if (event_type == EC_MKBP_EVENT_SENSOR_FIFO)
++ *wake_event = false;
++ /* Masked host-events should not count as wake events. */
++ else if (host_event &&
++ !(host_event & ec_dev->host_event_wake_mask))
++ *wake_event = false;
++ /* Consider all other events as wake events. */
++ else
++ *wake_event = true;
+ }
+
+ return ret;
+--
+2.19.1
+
--- /dev/null
+From 082d905afbbf8bfee861c933afe8b6763ebc21b4 Mon Sep 17 00:00:00 2001
+From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
+Date: Mon, 20 Aug 2018 13:47:32 +0530
+Subject: powerpc/fadump: Do not allow hot-remove memory from fadump reserved
+ area.
+
+[ Upstream commit 0db6896ff6332ba694f1e61b93ae3b2640317633 ]
+
+For fadump to work successfully there should not be any holes in reserved
+memory ranges where kernel has asked firmware to move the content of old
+kernel memory in event of crash. Now that fadump uses CMA for reserved
+area, this memory area is now not protected from hot-remove operations
+unless it is cma allocated. Hence, fadump service can fail to re-register
+after the hot-remove operation, if hot-removed memory belongs to fadump
+reserved region. To avoid this make sure that memory from fadump reserved
+area is not hot-removable if fadump is registered.
+
+However, if user still wants to remove that memory, he can do so by
+manually stopping fadump service before hot-remove operation.
+
+Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
+Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/powerpc/include/asm/fadump.h | 2 +-
+ arch/powerpc/kernel/fadump.c | 10 ++++++++--
+ arch/powerpc/platforms/pseries/hotplug-memory.c | 7 +++++--
+ 3 files changed, 14 insertions(+), 5 deletions(-)
+
+diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
+index 1e7a33592e29..15bc07a31c46 100644
+--- a/arch/powerpc/include/asm/fadump.h
++++ b/arch/powerpc/include/asm/fadump.h
+@@ -200,7 +200,7 @@ struct fad_crash_memory_ranges {
+ unsigned long long size;
+ };
+
+-extern int is_fadump_boot_memory_area(u64 addr, ulong size);
++extern int is_fadump_memory_area(u64 addr, ulong size);
+ extern int early_init_dt_scan_fw_dump(unsigned long node,
+ const char *uname, int depth, void *data);
+ extern int fadump_reserve_mem(void);
+diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
+index 5a6470383ca3..62d7ef6508de 100644
+--- a/arch/powerpc/kernel/fadump.c
++++ b/arch/powerpc/kernel/fadump.c
+@@ -117,13 +117,19 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
+
+ /*
+ * If fadump is registered, check if the memory provided
+- * falls within boot memory area.
++ * falls within boot memory area and reserved memory area.
+ */
+-int is_fadump_boot_memory_area(u64 addr, ulong size)
++int is_fadump_memory_area(u64 addr, ulong size)
+ {
++ u64 d_start = fw_dump.reserve_dump_area_start;
++ u64 d_end = d_start + fw_dump.reserve_dump_area_size;
++
+ if (!fw_dump.dump_registered)
+ return 0;
+
++ if (((addr + size) > d_start) && (addr <= d_end))
++ return 1;
++
+ return (addr + size) > RMA_START && addr <= fw_dump.boot_memory_size;
+ }
+
+diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
+index 1d48ab424bd9..93e09f108ca1 100644
+--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
++++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
+@@ -441,8 +441,11 @@ static bool lmb_is_removable(struct of_drconf_cell *lmb)
+ phys_addr = lmb->base_addr;
+
+ #ifdef CONFIG_FA_DUMP
+- /* Don't hot-remove memory that falls in fadump boot memory area */
+- if (is_fadump_boot_memory_area(phys_addr, block_sz))
++ /*
++ * Don't hot-remove memory that falls in fadump boot memory area
++ * and memory that is reserved for capturing old kernel memory.
++ */
++ if (is_fadump_memory_area(phys_addr, block_sz))
+ return false;
+ #endif
+
+--
+2.19.1
+
--- /dev/null
+From c11f90f67127a810692fdbd6b3dc383bb72d822f Mon Sep 17 00:00:00 2001
+From: Christophe Leroy <christophe.leroy@c-s.fr>
+Date: Wed, 28 Nov 2018 09:27:04 +0000
+Subject: powerpc/mm: Fix reporting of kernel execute faults on the 8xx
+
+[ Upstream commit ffca395b11c4a5a6df6d6345f794b0e3d578e2d0 ]
+
+On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
+a no-exec fault generates DSISR_PROTFAULT error bits,
+not DSISR_NOEXEC_OR_G.
+
+This patch adds DSISR_PROTFAULT in the test mask.
+
+Fixes: d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults")
+Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
+Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/powerpc/mm/fault.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
+index 6e1e39035380..52863deed65d 100644
+--- a/arch/powerpc/mm/fault.c
++++ b/arch/powerpc/mm/fault.c
+@@ -215,7 +215,9 @@ static int mm_fault_error(struct pt_regs *regs, unsigned long addr, int fault)
+ static bool bad_kernel_fault(bool is_exec, unsigned long error_code,
+ unsigned long address)
+ {
+- if (is_exec && (error_code & (DSISR_NOEXEC_OR_G | DSISR_KEYFAULT))) {
++ /* NX faults set DSISR_PROTFAULT on the 8xx, DSISR_NOEXEC_OR_G on others */
++ if (is_exec && (error_code & (DSISR_NOEXEC_OR_G | DSISR_KEYFAULT |
++ DSISR_PROTFAULT))) {
+ printk_ratelimited(KERN_CRIT "kernel tried to execute"
+ " exec-protected page (%lx) -"
+ "exploit attempt? (uid: %d)\n",
+--
+2.19.1
+
--- /dev/null
+From 45689278b90c59463fd670dc36b19a2d265b0013 Mon Sep 17 00:00:00 2001
+From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
+Date: Sun, 9 Dec 2018 14:48:15 +0530
+Subject: powerpc/perf: Fix thresholding counter data for unknown type
+
+[ Upstream commit 17cfccc91545682513541924245abb876d296063 ]
+
+MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value.
+Thresholding counter can be used to count latency cycles such as
+load miss to reload. But threshold counter value is not relevant
+when the sampled instruction type is unknown or reserved. Patch to
+fix the thresholding counter value to zero when sampled instruction
+type is unknown or reserved.
+
+Fixes: 170a315f41c6('powerpc/perf: Support to export MMCRA[TEC*] field to userspace')
+Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
+Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/powerpc/perf/isa207-common.c | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
+index 2efee3f196f5..cf9c35aa0cf4 100644
+--- a/arch/powerpc/perf/isa207-common.c
++++ b/arch/powerpc/perf/isa207-common.c
+@@ -228,8 +228,13 @@ void isa207_get_mem_weight(u64 *weight)
+ u64 mmcra = mfspr(SPRN_MMCRA);
+ u64 exp = MMCRA_THR_CTR_EXP(mmcra);
+ u64 mantissa = MMCRA_THR_CTR_MANT(mmcra);
++ u64 sier = mfspr(SPRN_SIER);
++ u64 val = (sier & ISA207_SIER_TYPE_MASK) >> ISA207_SIER_TYPE_SHIFT;
+
+- *weight = mantissa << (2 * exp);
++ if (val == 0 || val == 7)
++ *weight = 0;
++ else
++ *weight = mantissa << (2 * exp);
+ }
+
+ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
+--
+2.19.1
+
--- /dev/null
+From 21d9889be7166d43039e1aeb52bf7a482e7706bb Mon Sep 17 00:00:00 2001
+From: Frank Rowand <frank.rowand@sony.com>
+Date: Thu, 4 Oct 2018 20:27:16 -0700
+Subject: powerpc/pseries: add of_node_put() in dlpar_detach_node()
+
+[ Upstream commit 5b3f5c408d8cc59b87e47f1ab9803dbd006e4a91 ]
+
+The previous commit, "of: overlay: add missing of_node_get() in
+__of_attach_node_sysfs" added a missing of_node_get() to
+__of_attach_node_sysfs(). This results in a refcount imbalance
+for nodes attached with dlpar_attach_node(). The calling sequence
+from dlpar_attach_node() to __of_attach_node_sysfs() is:
+
+ dlpar_attach_node()
+ of_attach_node()
+ __of_attach_node_sysfs()
+
+For more detailed description of the node refcount, see
+commit 68baf692c435 ("powerpc/pseries: Fix of_node_put() underflow
+during DLPAR remove").
+
+Tested-by: Alan Tull <atull@kernel.org>
+Acked-by: Michael Ellerman <mpe@ellerman.id.au>
+Signed-off-by: Frank Rowand <frank.rowand@sony.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/powerpc/platforms/pseries/dlpar.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
+index e9149d05d30b..f4e6565dd7a9 100644
+--- a/arch/powerpc/platforms/pseries/dlpar.c
++++ b/arch/powerpc/platforms/pseries/dlpar.c
+@@ -284,6 +284,8 @@ int dlpar_detach_node(struct device_node *dn)
+ if (rc)
+ return rc;
+
++ of_node_put(dn);
++
+ return 0;
+ }
+
+--
+2.19.1
+
--- /dev/null
+From abbc7c56efb1ac10258ab5bdc213c210518df67e Mon Sep 17 00:00:00 2001
+From: Christophe Leroy <christophe.leroy@c-s.fr>
+Date: Mon, 10 Dec 2018 06:50:09 +0000
+Subject: powerpc/uaccess: fix warning/error with access_ok()
+
+[ Upstream commit 05a4ab823983d9136a460b7b5e0d49ee709a6f86 ]
+
+With the following piece of code, the following compilation warning
+is encountered:
+
+ if (_IOC_DIR(ioc) != _IOC_NONE) {
+ int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;
+
+ if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) {
+
+drivers/platform/test/dev.c: In function 'my_ioctl':
+drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable]
+ int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;
+
+This patch fixes it by referencing 'type' in the macro allthough
+doing nothing with it.
+
+Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
+Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/powerpc/include/asm/uaccess.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
+index 565cead12be2..cf26e62b268d 100644
+--- a/arch/powerpc/include/asm/uaccess.h
++++ b/arch/powerpc/include/asm/uaccess.h
+@@ -54,7 +54,7 @@
+ #endif
+
+ #define access_ok(type, addr, size) \
+- (__chk_user_ptr(addr), \
++ (__chk_user_ptr(addr), (void)(type), \
+ __access_ok((__force unsigned long)(addr), (size), get_fs()))
+
+ /*
+--
+2.19.1
+
--- /dev/null
+From b030322467976fbd5653d72abc50ddb4c42b96f3 Mon Sep 17 00:00:00 2001
+From: Cheng Lin <cheng.lin130@zte.com.cn>
+Date: Thu, 3 Jan 2019 15:26:13 -0800
+Subject: proc/sysctl: fix return error for proc_doulongvec_minmax()
+
+[ Upstream commit 09be178400829dddc1189b50a7888495dd26aa84 ]
+
+If the number of input parameters is less than the total parameters, an
+EINVAL error will be returned.
+
+For example, we use proc_doulongvec_minmax to pass up to two parameters
+with kern_table:
+
+{
+ .procname = "monitor_signals",
+ .data = &monitor_sigs,
+ .maxlen = 2*sizeof(unsigned long),
+ .mode = 0644,
+ .proc_handler = proc_doulongvec_minmax,
+},
+
+Reproduce:
+
+When passing two parameters, it's work normal. But passing only one
+parameter, an error "Invalid argument"(EINVAL) is returned.
+
+ [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals
+ [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
+ 1 2
+ [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals
+ -bash: echo: write error: Invalid argument
+ [root@cl150 ~]# echo $?
+ 1
+ [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
+ 3 2
+ [root@cl150 ~]#
+
+The following is the result after apply this patch. No error is
+returned when the number of input parameters is less than the total
+parameters.
+
+ [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals
+ [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
+ 1 2
+ [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals
+ [root@cl150 ~]# echo $?
+ 0
+ [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals
+ 3 2
+ [root@cl150 ~]#
+
+There are three processing functions dealing with digital parameters,
+__do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax.
+
+This patch deals with __do_proc_doulongvec_minmax, just as
+__do_proc_dointvec does, adding a check for parameters 'left'. In
+__do_proc_douintvec, its code implementation explicitly does not support
+multiple inputs.
+
+static int __do_proc_douintvec(...){
+ ...
+ /*
+ * Arrays are not supported, keep this simple. *Do not* add
+ * support for them.
+ */
+ if (vleft != 1) {
+ *lenp = 0;
+ return -EINVAL;
+ }
+ ...
+}
+
+So, just __do_proc_doulongvec_minmax has the problem. And most use of
+proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one
+parameter.
+
+Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cn
+Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
+Acked-by: Luis Chamberlain <mcgrof@kernel.org>
+Reviewed-by: Kees Cook <keescook@chromium.org>
+Cc: Alexey Dobriyan <adobriyan@gmail.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ kernel/sysctl.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/kernel/sysctl.c b/kernel/sysctl.c
+index d330b1ce3b94..3ad00bf90b3d 100644
+--- a/kernel/sysctl.c
++++ b/kernel/sysctl.c
+@@ -2708,6 +2708,8 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int
+ bool neg;
+
+ left -= proc_skip_spaces(&p);
++ if (!left)
++ break;
+
+ err = proc_get_long(&p, &left, &val, &neg,
+ proc_wspace_sep,
+--
+2.19.1
+
--- /dev/null
+From 268bbf902e1f490f138007a9e1c25b8afa054ebd Mon Sep 17 00:00:00 2001
+From: Miroslav Lichvar <mlichvar@redhat.com>
+Date: Fri, 9 Nov 2018 11:14:43 +0100
+Subject: ptp: check gettime64 return code in PTP_SYS_OFFSET ioctl
+
+[ Upstream commit 83d0bdc7390b890905634186baaa294475cd6a06 ]
+
+If a gettime64 call fails, return the error and avoid copying data back
+to user.
+
+Cc: Richard Cochran <richardcochran@gmail.com>
+Cc: Jacob Keller <jacob.e.keller@intel.com>
+Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/ptp/ptp_chardev.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c
+index a421d6c551b6..ecb41eacd74b 100644
+--- a/drivers/ptp/ptp_chardev.c
++++ b/drivers/ptp/ptp_chardev.c
+@@ -228,7 +228,9 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg)
+ pct->sec = ts.tv_sec;
+ pct->nsec = ts.tv_nsec;
+ pct++;
+- ptp->info->gettime64(ptp->info, &ts);
++ err = ptp->info->gettime64(ptp->info, &ts);
++ if (err)
++ goto out;
+ pct->sec = ts.tv_sec;
+ pct->nsec = ts.tv_nsec;
+ pct++;
+@@ -281,6 +283,7 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg)
+ break;
+ }
+
++out:
+ kfree(sysoff);
+ return err;
+ }
+--
+2.19.1
+
--- /dev/null
+From 7b6aa80e235d47864dba719547c7f5735c02e7a8 Mon Sep 17 00:00:00 2001
+From: YueHaibing <yuehaibing@huawei.com>
+Date: Fri, 23 Nov 2018 09:54:55 +0800
+Subject: ptp: Fix pass zero to ERR_PTR() in ptp_clock_register
+
+[ Upstream commit aea0a897af9e44c258e8ab9296fad417f1bc063a ]
+
+Fix smatch warning:
+
+drivers/ptp/ptp_clock.c:298 ptp_clock_register() warn:
+ passing zero to 'ERR_PTR'
+
+'err' should be set while device_create_with_groups and
+pps_register_source fails
+
+Fixes: 85a66e550195 ("ptp: create "pins" together with the rest of attributes")
+Signed-off-by: YueHaibing <yuehaibing@huawei.com>
+Acked-by: Richard Cochran <richardcochran@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/ptp/ptp_clock.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
+index 7eacc1c4b3b1..c64903a5978f 100644
+--- a/drivers/ptp/ptp_clock.c
++++ b/drivers/ptp/ptp_clock.c
+@@ -253,8 +253,10 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
+ ptp->dev = device_create_with_groups(ptp_class, parent, ptp->devid,
+ ptp, ptp->pin_attr_groups,
+ "ptp%d", ptp->index);
+- if (IS_ERR(ptp->dev))
++ if (IS_ERR(ptp->dev)) {
++ err = PTR_ERR(ptp->dev);
+ goto no_device;
++ }
+
+ /* Register a new PPS source. */
+ if (info->pps) {
+@@ -265,6 +267,7 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
+ pps.owner = info->owner;
+ ptp->pps_source = pps_register_source(&pps, PTP_PPS_DEFAULTS);
+ if (!ptp->pps_source) {
++ err = -EINVAL;
+ pr_err("failed to register pps source\n");
+ goto no_pps;
+ }
+--
+2.19.1
+
--- /dev/null
+From e02c827f2154bd4b2ba155ea0f28866c7e5ef8f3 Mon Sep 17 00:00:00 2001
+From: Harald Freudenberger <freude@linux.ibm.com>
+Date: Mon, 19 Nov 2018 11:36:13 +0100
+Subject: s390/zcrypt: improve special ap message cmd handling
+
+[ Upstream commit be534791011100d204602e2e0496e9e6ce8edf63 ]
+
+There exist very few ap messages which need to have the 'special' flag
+enabled. This flag tells the firmware layer to do some pre- and maybe
+postprocessing. However, it may happen that this special flag is
+enabled but the firmware is unable to deal with this kind of message
+and thus returns with reply code 0x41. For example older firmware may
+not know the newest messages triggered by the zcrypt device driver and
+thus react with reject and the named reply code. Unfortunately this
+reply code is not known to the zcrypt error routines and thus default
+behavior is to switch the ap queue offline.
+
+This patch now makes the ap error routine aware of the reply code and
+so userspace is informed about the bad processing result but the queue
+is not switched to offline state any more.
+
+Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
+Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/s390/include/uapi/asm/zcrypt.h | 4 ++--
+ drivers/s390/crypto/zcrypt_error.h | 2 ++
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/arch/s390/include/uapi/asm/zcrypt.h b/arch/s390/include/uapi/asm/zcrypt.h
+index 137ef473584e..b9fb42089760 100644
+--- a/arch/s390/include/uapi/asm/zcrypt.h
++++ b/arch/s390/include/uapi/asm/zcrypt.h
+@@ -161,8 +161,8 @@ struct ica_xcRB {
+ * @cprb_len: CPRB header length [0x0020]
+ * @cprb_ver_id: CPRB version id. [0x04]
+ * @pad_000: Alignment pad bytes
+- * @flags: Admin cmd [0x80] or functional cmd [0x00]
+- * @func_id: Function id / subtype [0x5434]
++ * @flags: Admin bit [0x80], Special bit [0x20]
++ * @func_id: Function id / subtype [0x5434] "T4"
+ * @source_id: Source id [originator id]
+ * @target_id: Target id [usage/ctrl domain id]
+ * @ret_code: Return code
+diff --git a/drivers/s390/crypto/zcrypt_error.h b/drivers/s390/crypto/zcrypt_error.h
+index 13df60209ed3..9499cd3a05f8 100644
+--- a/drivers/s390/crypto/zcrypt_error.h
++++ b/drivers/s390/crypto/zcrypt_error.h
+@@ -65,6 +65,7 @@ struct error_hdr {
+ #define REP82_ERROR_FORMAT_FIELD 0x29
+ #define REP82_ERROR_INVALID_COMMAND 0x30
+ #define REP82_ERROR_MALFORMED_MSG 0x40
++#define REP82_ERROR_INVALID_SPECIAL_CMD 0x41
+ #define REP82_ERROR_INVALID_DOMAIN_PRECHECK 0x42
+ #define REP82_ERROR_RESERVED_FIELDO 0x50 /* old value */
+ #define REP82_ERROR_WORD_ALIGNMENT 0x60
+@@ -103,6 +104,7 @@ static inline int convert_error(struct zcrypt_queue *zq,
+ case REP88_ERROR_MESSAGE_MALFORMD:
+ case REP82_ERROR_INVALID_DOMAIN_PRECHECK:
+ case REP82_ERROR_INVALID_DOMAIN_PENDING:
++ case REP82_ERROR_INVALID_SPECIAL_CMD:
+ // REP88_ERROR_INVALID_KEY // '82' CEX2A
+ // REP88_ERROR_OPERAND // '84' CEX2A
+ // REP88_ERROR_OPERAND_EVEN_MOD // '85' CEX2A
+--
+2.19.1
+
--- /dev/null
+From c99c44a1499348d06f53571d73815fe12faf07f6 Mon Sep 17 00:00:00 2001
+From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Date: Sat, 24 Nov 2018 21:14:16 +0300
+Subject: sata_rcar: fix deferred probing
+
+[ Upstream commit 9f83cfdb1ace3ef268ecc6fda50058d2ec37d603 ]
+
+The driver overrides the error codes returned by platform_get_irq() to
+-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
+permanently instead of the deferred probing. Switch to propagating the
+error code upstream, still checking/overriding IRQ0 as libata regards it
+as "no IRQ" (thus polling) anyway...
+
+Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
+Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
+Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
+Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/ata/sata_rcar.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
+index 537d11869069..3e82a4ac239e 100644
+--- a/drivers/ata/sata_rcar.c
++++ b/drivers/ata/sata_rcar.c
+@@ -880,7 +880,9 @@ static int sata_rcar_probe(struct platform_device *pdev)
+ int ret = 0;
+
+ irq = platform_get_irq(pdev, 0);
+- if (irq <= 0)
++ if (irq < 0)
++ return irq;
++ if (!irq)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct sata_rcar_priv),
+--
+2.19.1
+
--- /dev/null
+From 907ff0cb4f00af35aa44af55fc1fb1b22231ebfa Mon Sep 17 00:00:00 2001
+From: Marc Zyngier <marc.zyngier@arm.com>
+Date: Fri, 28 Dec 2018 00:31:25 -0800
+Subject: scripts/decode_stacktrace: only strip base path when a prefix of the
+ path
+
+[ Upstream commit 67a28de47faa83585dd644bd4c31e5a1d9346c50 ]
+
+Running something like:
+
+ decodecode vmlinux .
+
+leads to interested results where not only the leading "." gets stripped
+from the displayed paths, but also anywhere in the string, displaying
+something like:
+
+ kvm_vcpu_check_block (arch/arm64/kvm/virt/kvm/kvm_mainc:2141)
+
+which doesn't help further processing.
+
+Fix it by only stripping the base path if it is a prefix of the path.
+
+Link: http://lkml.kernel.org/r/20181210174659.31054-3-marc.zyngier@arm.com
+Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
+Cc: Will Deacon <will.deacon@arm.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ scripts/decode_stacktrace.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
+index 64220e36ce3b..98a7d63a723e 100755
+--- a/scripts/decode_stacktrace.sh
++++ b/scripts/decode_stacktrace.sh
+@@ -78,7 +78,7 @@ parse_symbol() {
+ fi
+
+ # Strip out the base of the path
+- code=${code//$basepath/""}
++ code=${code//^$basepath/""}
+
+ # In the case of inlines, move everything to same line
+ code=${code//$'\n'/' '}
+--
+2.19.1
+
--- /dev/null
+From a1377270001749d1e58b7ebdb298d8971790f405 Mon Sep 17 00:00:00 2001
+From: Du Changbin <changbin.du@gmail.com>
+Date: Thu, 3 Jan 2019 15:28:27 -0800
+Subject: scripts/gdb: fix lx-version string output
+
+[ Upstream commit b058809bfc8faeb7b7cae047666e23375a060059 ]
+
+A bug is present in GDB which causes early string termination when
+parsing variables. This has been reported [0], but we should ensure
+that we can support at least basic printing of the core kernel strings.
+
+For current gdb version (has been tested with 7.3 and 8.1), 'lx-version'
+only prints one character.
+
+ (gdb) lx-version
+ L(gdb)
+
+This can be fixed by casting 'linux_banner' as (char *).
+
+ (gdb) lx-version
+ Linux version 4.19.0-rc1+ (changbin@acer) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21 SMP Sat Sep 1 21:43:30 CST 2018
+
+[0] https://sourceware.org/bugzilla/show_bug.cgi?id=20077
+
+[kbingham@kernel.org: add detail to commit message]
+Link: http://lkml.kernel.org/r/20181111162035.8356-1-kieran.bingham@ideasonboard.com
+Fixes: 2d061d999424 ("scripts/gdb: add version command")
+Signed-off-by: Du Changbin <changbin.du@gmail.com>
+Signed-off-by: Kieran Bingham <kbingham@kernel.org>
+Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
+Cc: Jan Kiszka <jan.kiszka@siemens.com>
+Cc: Jason Wessel <jason.wessel@windriver.com>
+Cc: Daniel Thompson <daniel.thompson@linaro.org>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ scripts/gdb/linux/proc.py | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripts/gdb/linux/proc.py b/scripts/gdb/linux/proc.py
+index 086d27223c0c..0aebd7565b03 100644
+--- a/scripts/gdb/linux/proc.py
++++ b/scripts/gdb/linux/proc.py
+@@ -41,7 +41,7 @@ class LxVersion(gdb.Command):
+
+ def invoke(self, arg, from_tty):
+ # linux_banner should contain a newline
+- gdb.write(gdb.parse_and_eval("linux_banner").string())
++ gdb.write(gdb.parse_and_eval("(char *)linux_banner").string())
+
+ LxVersion()
+
+--
+2.19.1
+
--- /dev/null
+From bfa9bd6fa3552dc1371f6c4ff0194cf557d64660 Mon Sep 17 00:00:00 2001
+From: James Smart <jsmart2021@gmail.com>
+Date: Tue, 23 Oct 2018 13:41:07 -0700
+Subject: scsi: lpfc: Correct LCB RJT handling
+
+[ Upstream commit b114d9009d386276bfc3352289fc235781ae3353 ]
+
+When LCB's are rejected, if beaconing was already in progress, the
+Reason Code Explanation was not being set. Should have been set to
+command in progress.
+
+Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
+Signed-off-by: James Smart <jsmart2021@gmail.com>
+Reviewed-by: Hannes Reinecke <hare@suse.com>
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/scsi/lpfc/lpfc_els.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
+index 91783dbdf10c..fffe8a643e25 100644
+--- a/drivers/scsi/lpfc/lpfc_els.c
++++ b/drivers/scsi/lpfc/lpfc_els.c
+@@ -5696,6 +5696,9 @@ error:
+ stat = (struct ls_rjt *)(pcmd + sizeof(uint32_t));
+ stat->un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
+
++ if (shdr_add_status == ADD_STATUS_OPERATION_ALREADY_ACTIVE)
++ stat->un.b.lsRjtRsnCodeExp = LSEXP_CMD_IN_PROGRESS;
++
+ elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
+ phba->fc_stat.elsXmitLSRJT++;
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
+--
+2.19.1
+
--- /dev/null
+From fbf2df579ad6f24387530e9bb8cb88ecf1d93fe2 Mon Sep 17 00:00:00 2001
+From: James Smart <jsmart2021@gmail.com>
+Date: Tue, 23 Oct 2018 13:41:03 -0700
+Subject: scsi: lpfc: Fix LOGO/PLOGI handling when triggerd by ABTS Timeout
+ event
+
+[ Upstream commit 30e196cacefdd9a38c857caed23cefc9621bc5c1 ]
+
+After a LOGO in response to an ABTS timeout, a PLOGI wasn't issued to
+re-establish the login. An nlp_type check in the LOGO completion
+handler failed to restart discovery for NVME targets. Revised the
+nlp_type check for NVME as well as SCSI.
+
+While reviewing the LOGO handling a few other issues were seen and
+were addressed:
+
+- Better lock synchronization around ndlp data types
+
+- When the ABTS times out, unregister the RPI before sending the LOGO
+ so that all local exchange contexts are cleared and nothing received
+ while awaiting LOGO/PLOGI handling will be accepted.
+
+- LOGO handling optimized to:
+ Wait only R_A_TOV for a response.
+ It doesn't need to be retried on timeout. If there wasn't a
+ response, a PLOGI will be sent, thus an implicit logout
+ applies as well when the other port sees it.
+ If there is a response, any kind of response is considered "good"
+ and the XRI quarantined for a exchange qualifier window.
+
+- PLOGI is issued as soon a LOGO state is resolved.
+
+Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
+Signed-off-by: James Smart <jsmart2021@gmail.com>
+Reviewed-by: Hannes Reinecke <hare@suse.com>
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/scsi/lpfc/lpfc_els.c | 49 +++++++++++++-----------------
+ drivers/scsi/lpfc/lpfc_nportdisc.c | 5 +++
+ 2 files changed, 26 insertions(+), 28 deletions(-)
+
+diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
+index fffe8a643e25..57cddbc4a977 100644
+--- a/drivers/scsi/lpfc/lpfc_els.c
++++ b/drivers/scsi/lpfc/lpfc_els.c
+@@ -242,6 +242,8 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
+ icmd->ulpCommand = CMD_ELS_REQUEST64_CR;
+ if (elscmd == ELS_CMD_FLOGI)
+ icmd->ulpTimeout = FF_DEF_RATOV * 2;
++ else if (elscmd == ELS_CMD_LOGO)
++ icmd->ulpTimeout = phba->fc_ratov;
+ else
+ icmd->ulpTimeout = phba->fc_ratov * 2;
+ } else {
+@@ -2674,16 +2676,15 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+ goto out;
+ }
+
++ /* The LOGO will not be retried on failure. A LOGO was
++ * issued to the remote rport and a ACC or RJT or no Answer are
++ * all acceptable. Note the failure and move forward with
++ * discovery. The PLOGI will retry.
++ */
+ if (irsp->ulpStatus) {
+- /* Check for retry */
+- if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
+- /* ELS command is being retried */
+- skip_recovery = 1;
+- goto out;
+- }
+ /* LOGO failed */
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+- "2756 LOGO failure DID:%06X Status:x%x/x%x\n",
++ "2756 LOGO failure, No Retry DID:%06X Status:x%x/x%x\n",
+ ndlp->nlp_DID, irsp->ulpStatus,
+ irsp->un.ulpWord[4]);
+ /* Do not call DSM for lpfc_els_abort'ed ELS cmds */
+@@ -2729,7 +2730,8 @@ out:
+ * For any other port type, the rpi is unregistered as an implicit
+ * LOGO.
+ */
+- if ((ndlp->nlp_type & NLP_FCP_TARGET) && (skip_recovery == 0)) {
++ if (ndlp->nlp_type & (NLP_FCP_TARGET | NLP_NVME_TARGET) &&
++ skip_recovery == 0) {
+ lpfc_cancel_retry_delay_tmo(vport, ndlp);
+ spin_lock_irqsave(shost->host_lock, flags);
+ ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+@@ -2762,6 +2764,8 @@ out:
+ * will be stored into the context1 field of the IOCB for the completion
+ * callback function to the LOGO ELS command.
+ *
++ * Callers of this routine are expected to unregister the RPI first
++ *
+ * Return code
+ * 0 - successfully issued logo
+ * 1 - failed to issue logo
+@@ -2803,22 +2807,6 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
+ "Issue LOGO: did:x%x",
+ ndlp->nlp_DID, 0, 0);
+
+- /*
+- * If we are issuing a LOGO, we may try to recover the remote NPort
+- * by issuing a PLOGI later. Even though we issue ELS cmds by the
+- * VPI, if we have a valid RPI, and that RPI gets unreg'ed while
+- * that ELS command is in-flight, the HBA returns a IOERR_INVALID_RPI
+- * for that ELS cmd. To avoid this situation, lets get rid of the
+- * RPI right now, before any ELS cmds are sent.
+- */
+- spin_lock_irq(shost->host_lock);
+- ndlp->nlp_flag |= NLP_ISSUE_LOGO;
+- spin_unlock_irq(shost->host_lock);
+- if (lpfc_unreg_rpi(vport, ndlp)) {
+- lpfc_els_free_iocb(phba, elsiocb);
+- return 0;
+- }
+-
+ phba->fc_stat.elsXmitLOGO++;
+ elsiocb->iocb_cmpl = lpfc_cmpl_els_logo;
+ spin_lock_irq(shost->host_lock);
+@@ -2826,7 +2814,6 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
+ ndlp->nlp_flag &= ~NLP_ISSUE_LOGO;
+ spin_unlock_irq(shost->host_lock);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
+-
+ if (rc == IOCB_ERROR) {
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag &= ~NLP_LOGO_SND;
+@@ -2834,6 +2821,11 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
+ lpfc_els_free_iocb(phba, elsiocb);
+ return 1;
+ }
++
++ spin_lock_irq(shost->host_lock);
++ ndlp->nlp_prev_state = ndlp->nlp_state;
++ spin_unlock_irq(shost->host_lock);
++ lpfc_nlp_set_state(vport, ndlp, NLP_STE_LOGO_ISSUE);
+ return 0;
+ }
+
+@@ -9483,7 +9475,8 @@ lpfc_sli_abts_recover_port(struct lpfc_vport *vport,
+ "rport in state 0x%x\n", ndlp->nlp_state);
+ return;
+ }
+- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
++ lpfc_printf_log(phba, KERN_ERR,
++ LOG_ELS | LOG_FCP_ERROR | LOG_NVME_IOERR,
+ "3094 Start rport recovery on shost id 0x%x "
+ "fc_id 0x%06x vpi 0x%x rpi 0x%x state 0x%x "
+ "flags 0x%x\n",
+@@ -9496,8 +9489,8 @@ lpfc_sli_abts_recover_port(struct lpfc_vport *vport,
+ */
+ spin_lock_irqsave(shost->host_lock, flags);
+ ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
++ ndlp->nlp_flag |= NLP_ISSUE_LOGO;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+- lpfc_issue_els_logo(vport, ndlp, 0);
+- lpfc_nlp_set_state(vport, ndlp, NLP_STE_LOGO_ISSUE);
++ lpfc_unreg_rpi(vport, ndlp);
+ }
+
+diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
+index d489f6827cc1..36fb549eb4e8 100644
+--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
++++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
+@@ -801,7 +801,9 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
++ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag &= ~NLP_NPR_ADISC;
++ spin_unlock_irq(shost->host_lock);
+ return 0;
+ }
+
+@@ -816,7 +818,10 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
+ return 1;
+ }
+ }
++
++ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag &= ~NLP_NPR_ADISC;
++ spin_unlock_irq(shost->host_lock);
+ lpfc_unreg_rpi(vport, ndlp);
+ return 0;
+ }
+--
+2.19.1
+
--- /dev/null
+From a70f8bdf75640e563d7045e551474ecf00339bb6 Mon Sep 17 00:00:00 2001
+From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
+Date: Wed, 31 Oct 2018 18:53:35 +0530
+Subject: scsi: mpt3sas: Call sas_remove_host before removing the target
+ devices
+
+[ Upstream commit dc730212e8a378763cb182b889f90c8101331332 ]
+
+Call sas_remove_host() before removing the target devices in the driver's
+.remove() callback function(i.e. during driver unload time). So that
+driver can provide a way to allow SYNC CACHE, START STOP unit commands
+etc. (which are issued from SML) to the target drives during driver unload
+time.
+
+Once sas_remove_host() is called before removing the target drives then
+driver can just clean up the resources allocated for target devices and no
+need to call sas_port_delete_phy(), sas_port_delete() API's as these API's
+internally called from sas_remove_host().
+
+Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
+Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
+Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
+ drivers/scsi/mpt3sas/mpt3sas_transport.c | 7 +++++--
+ 2 files changed, 6 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+index ae5e579ac473..b28efddab7b1 100644
+--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
++++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+@@ -8260,6 +8260,7 @@ static void scsih_remove(struct pci_dev *pdev)
+
+ /* release all the volumes */
+ _scsih_ir_shutdown(ioc);
++ sas_remove_host(shost);
+ list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+ list) {
+ if (raid_device->starget) {
+@@ -8296,7 +8297,6 @@ static void scsih_remove(struct pci_dev *pdev)
+ ioc->sas_hba.num_phys = 0;
+ }
+
+- sas_remove_host(shost);
+ mpt3sas_base_detach(ioc);
+ spin_lock(&gioc_lock);
+ list_del(&ioc->list);
+diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
+index 63dd9bc21ff2..66d9f04c4c0b 100644
+--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
++++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
+@@ -846,10 +846,13 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+ mpt3sas_port->remote_identify.sas_address,
+ mpt3sas_phy->phy_id);
+ mpt3sas_phy->phy_belongs_to_port = 0;
+- sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
++ if (!ioc->remove_host)
++ sas_port_delete_phy(mpt3sas_port->port,
++ mpt3sas_phy->phy);
+ list_del(&mpt3sas_phy->port_siblings);
+ }
+- sas_port_delete(mpt3sas_port->port);
++ if (!ioc->remove_host)
++ sas_port_delete(mpt3sas_port->port);
+ kfree(mpt3sas_port);
+ }
+
+--
+2.19.1
+
--- /dev/null
+From dcd9c1e17ebe18c1508cb64289a2e92b5ec66efd Mon Sep 17 00:00:00 2001
+From: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
+Date: Fri, 7 Dec 2018 16:28:29 -0600
+Subject: scsi: smartpqi: correct host serial num for ssa
+
+[ Upstream commit b2346b5030cf9458f30a84028d9fe904b8c942a7 ]
+
+Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
+Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com>
+Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com>
+Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
+Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
+Reviewed-by: Scott Teel <scott.teel@microsemi.com>
+Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
+Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
+Signed-off-by: Don Brace <don.brace@microsemi.com>
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/scsi/smartpqi/smartpqi_init.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
+index bc15999f1c7c..cc27ae2e8a2d 100644
+--- a/drivers/scsi/smartpqi/smartpqi_init.c
++++ b/drivers/scsi/smartpqi/smartpqi_init.c
+@@ -653,6 +653,7 @@ struct bmic_host_wellness_driver_version {
+ u8 driver_version_tag[2];
+ __le16 driver_version_length;
+ char driver_version[32];
++ u8 dont_write_tag[2];
+ u8 end_tag[2];
+ };
+
+@@ -682,6 +683,8 @@ static int pqi_write_driver_version_to_host_wellness(
+ strncpy(buffer->driver_version, "Linux " DRIVER_VERSION,
+ sizeof(buffer->driver_version) - 1);
+ buffer->driver_version[sizeof(buffer->driver_version) - 1] = '\0';
++ buffer->dont_write_tag[0] = 'D';
++ buffer->dont_write_tag[1] = 'W';
+ buffer->end_tag[0] = 'Z';
+ buffer->end_tag[1] = 'Z';
+
+--
+2.19.1
+
--- /dev/null
+From 279a07d2546e5d916b6ee28722fdd4d25ad10c97 Mon Sep 17 00:00:00 2001
+From: Dave Carroll <david.carroll@microsemi.com>
+Date: Fri, 7 Dec 2018 16:29:45 -0600
+Subject: scsi: smartpqi: correct volume status
+
+[ Upstream commit 7ff44499bafbd376115f0bb6b578d980f56ee13b ]
+
+- fix race condition when a unit is deleted after an RLL,
+ and before we have gotten the LV_STATUS page of the unit.
+ - In this case we will get a standard inquiry, rather than
+ the desired page. This will result in a unit presented
+ which no longer exists.
+ - If we ask for LV_STATUS, insure we get LV_STATUS
+
+Reviewed-by: Murthy Bhat <murthy.bhat@microsemi.com>
+Reviewed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
+Reviewed-by: Scott Teel <scott.teel@microsemi.com>
+Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
+Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
+Signed-off-by: Don Brace <don.brace@microsemi.com>
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/scsi/smartpqi/smartpqi_init.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
+index cc27ae2e8a2d..5ec2898d21cd 100644
+--- a/drivers/scsi/smartpqi/smartpqi_init.c
++++ b/drivers/scsi/smartpqi/smartpqi_init.c
+@@ -1184,6 +1184,9 @@ static void pqi_get_volume_status(struct pqi_ctrl_info *ctrl_info,
+ if (rc)
+ goto out;
+
++ if (vpd->page_code != CISS_VPD_LV_STATUS)
++ goto out;
++
+ page_length = offsetof(struct ciss_vpd_logical_volume_status,
+ volume_status) + vpd->page_length;
+ if (page_length < sizeof(*vpd))
+--
+2.19.1
+
--- /dev/null
+From eb09bc615a06931ea5b2374d45cfa4be0cb13ab4 Mon Sep 17 00:00:00 2001
+From: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
+Date: Tue, 18 Dec 2018 17:39:01 -0600
+Subject: scsi: smartpqi: increase fw status register read timeout
+
+[ Upstream commit 65111785acccb836ec75263b03b0e33f21e74f47 ]
+
+Problem:
+ - during the driver initialization, driver will poll fw
+ for KERNEL_UP in a 30 seconds timeout.
+
+ - if the firmware is not ready after 30 seconds,
+ driver will not be loaded.
+
+Fix:
+ - change timeout from 30 seconds to 3 minutes.
+
+Reported-by: Feng Li <lifeng1519@gmail.com>
+Reviewed-by: Ajish Koshy <ajish.koshy@microsemi.com>
+Reviewed-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
+Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
+Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
+Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com>
+Signed-off-by: Don Brace <don.brace@microsemi.com>
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/scsi/smartpqi/smartpqi_sis.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c b/drivers/scsi/smartpqi/smartpqi_sis.c
+index 5141bd4c9f06..ca7dfb3a520f 100644
+--- a/drivers/scsi/smartpqi/smartpqi_sis.c
++++ b/drivers/scsi/smartpqi/smartpqi_sis.c
+@@ -59,7 +59,7 @@
+
+ #define SIS_CTRL_KERNEL_UP 0x80
+ #define SIS_CTRL_KERNEL_PANIC 0x100
+-#define SIS_CTRL_READY_TIMEOUT_SECS 30
++#define SIS_CTRL_READY_TIMEOUT_SECS 180
+ #define SIS_CTRL_READY_RESUME_TIMEOUT_SECS 90
+ #define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10
+
+--
+2.19.1
+
--- /dev/null
+From 51e1754283dd3bb342c8f1901d01fb447b66bb29 Mon Sep 17 00:00:00 2001
+From: Stanislav Fomichev <sdf@google.com>
+Date: Tue, 11 Dec 2018 19:20:52 -0800
+Subject: selftests/bpf: use __bpf_constant_htons in test_prog.c
+
+[ Upstream commit a0517a0f7ef23550b4484c37e2b9c2d32abebf64 ]
+
+For some reason, my older GCC (< 4.8) isn't smart enough to optimize the
+!__builtin_constant_p() branch in bpf_htons, I see:
+ error: implicit declaration of function '__builtin_bswap16'
+
+Let's use __bpf_constant_htons as suggested by Daniel Borkmann.
+
+I tried to use simple htons, but it produces the following:
+ test_progs.c:54:17: error: braced-group within expression allowed only
+ inside a function
+ .eth.h_proto = htons(ETH_P_IP),
+
+Signed-off-by: Stanislav Fomichev <sdf@google.com>
+Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
+Signed-off-by: Alexei Starovoitov <ast@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/testing/selftests/bpf/test_progs.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
+index 11ee25cea227..1903fb4f45d8 100644
+--- a/tools/testing/selftests/bpf/test_progs.c
++++ b/tools/testing/selftests/bpf/test_progs.c
+@@ -43,10 +43,10 @@ static struct {
+ struct iphdr iph;
+ struct tcphdr tcp;
+ } __packed pkt_v4 = {
+- .eth.h_proto = bpf_htons(ETH_P_IP),
++ .eth.h_proto = __bpf_constant_htons(ETH_P_IP),
+ .iph.ihl = 5,
+ .iph.protocol = 6,
+- .iph.tot_len = bpf_htons(MAGIC_BYTES),
++ .iph.tot_len = __bpf_constant_htons(MAGIC_BYTES),
+ .tcp.urg_ptr = 123,
+ };
+
+@@ -56,9 +56,9 @@ static struct {
+ struct ipv6hdr iph;
+ struct tcphdr tcp;
+ } __packed pkt_v6 = {
+- .eth.h_proto = bpf_htons(ETH_P_IPV6),
++ .eth.h_proto = __bpf_constant_htons(ETH_P_IPV6),
+ .iph.nexthdr = 6,
+- .iph.payload_len = bpf_htons(MAGIC_BYTES),
++ .iph.payload_len = __bpf_constant_htons(MAGIC_BYTES),
+ .tcp.urg_ptr = 123,
+ };
+
+--
+2.19.1
+
--- /dev/null
+From c3844a0aa4d93585655696a8d96529982b1e9b73 Mon Sep 17 00:00:00 2001
+From: Michael Ellerman <mpe@ellerman.id.au>
+Date: Fri, 19 Oct 2018 15:21:08 +1100
+Subject: seq_buf: Make seq_buf_puts() null-terminate the buffer
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 0464ed24380905d640030d368cd84a4e4d1e15e2 ]
+
+Currently seq_buf_puts() will happily create a non null-terminated
+string for you in the buffer. This is particularly dangerous if the
+buffer is on the stack.
+
+For example:
+
+ char buf[8];
+ char secret = "secret";
+ struct seq_buf s;
+
+ seq_buf_init(&s, buf, sizeof(buf));
+ seq_buf_puts(&s, "foo");
+ printk("Message is %s\n", buf);
+
+Can result in:
+
+ Message is fooªªªªªsecret
+
+We could require all users to memset() their buffer to zero before
+use. But that seems likely to be forgotten and lead to bugs.
+
+Instead we can change seq_buf_puts() to always leave the buffer in a
+null-terminated state.
+
+The only downside is that this makes the buffer 1 character smaller
+for seq_buf_puts(), but that seems like a good trade off.
+
+Link: http://lkml.kernel.org/r/20181019042109.8064-1-mpe@ellerman.id.au
+
+Acked-by: Kees Cook <keescook@chromium.org>
+Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
+Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ lib/seq_buf.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/lib/seq_buf.c b/lib/seq_buf.c
+index 11f2ae0f9099..6aabb609dd87 100644
+--- a/lib/seq_buf.c
++++ b/lib/seq_buf.c
+@@ -144,9 +144,13 @@ int seq_buf_puts(struct seq_buf *s, const char *str)
+
+ WARN_ON(s->size == 0);
+
++ /* Add 1 to len for the trailing null byte which must be there */
++ len += 1;
++
+ if (seq_buf_can_fit(s, len)) {
+ memcpy(s->buffer + s->len, str, len);
+- s->len += len;
++ /* Don't count the trailing null byte against the capacity */
++ s->len += len - 1;
+ return 0;
+ }
+ seq_buf_set_overflow(s);
+--
+2.19.1
+
--- /dev/null
+From 9b2e3dde710a0d07cb526413ea931a85ed9a058f Mon Sep 17 00:00:00 2001
+From: Andy Duan <fugang.duan@nxp.com>
+Date: Tue, 16 Oct 2018 07:32:22 +0000
+Subject: serial: fsl_lpuart: clear parity enable bit when disable parity
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 397bd9211fe014b347ca8f95a8f4e1017bac1aeb ]
+
+Current driver only enable parity enable bit and never clear it
+when user set the termios. The fix clear the parity enable bit when
+PARENB flag is not set in termios->c_cflag.
+
+Cc: Lukas Wunner <lukas@wunner.de>
+Signed-off-by: Andy Duan <fugang.duan@nxp.com>
+Reviewed-by: Fabio Estevam <festevam@gmail.com>
+Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/tty/serial/fsl_lpuart.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
+index fd64ac2c1a74..716c33b2a11c 100644
+--- a/drivers/tty/serial/fsl_lpuart.c
++++ b/drivers/tty/serial/fsl_lpuart.c
+@@ -1482,6 +1482,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
+ else
+ cr1 &= ~UARTCR1_PT;
+ }
++ } else {
++ cr1 &= ~UARTCR1_PE;
+ }
+
+ /* ask the core to calculate the divisor */
+@@ -1694,6 +1696,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
+ else
+ ctrl &= ~UARTCTRL_PT;
+ }
++ } else {
++ ctrl &= ~UARTCTRL_PE;
+ }
+
+ /* ask the core to calculate the divisor */
+--
+2.19.1
+
--- /dev/null
+drm-bufs-fix-spectre-v1-vulnerability.patch
+staging-iio-adc-ad7280a-handle-error-from-__ad7280_r.patch
+drm-vgem-fix-vgem_init-to-get-drm-device-available.patch
+pinctrl-bcm2835-use-raw-spinlock-for-rt-compatibilit.patch
+asoc-intel-mrfld-fix-uninitialized-variable-access.patch
+gpu-ipu-v3-image-convert-prevent-race-between-run-an.patch
+ath9k-dynack-use-authentication-messages-for-late-ac.patch
+scsi-lpfc-correct-lcb-rjt-handling.patch
+scsi-mpt3sas-call-sas_remove_host-before-removing-th.patch
+scsi-lpfc-fix-logo-plogi-handling-when-triggerd-by-a.patch
+arm-8808-1-kexec-offline-panic_smp_self_stop-cpu.patch
+clk-boston-fix-possible-memory-leak-in-clk_boston_se.patch
+dlm-don-t-swamp-the-cpu-with-callbacks-queued-during.patch
+x86-pci-fix-broadcom-cnb20le-unintended-sign-extensi.patch
+powerpc-pseries-add-of_node_put-in-dlpar_detach_node.patch
+crypto-aes_ti-disable-interrupts-while-accessing-s-b.patch
+drm-vc4-x_scaling-1-should-never-be-set-to-vc4_scali.patch
+serial-fsl_lpuart-clear-parity-enable-bit-when-disab.patch
+ptp-check-gettime64-return-code-in-ptp_sys_offset-io.patch
+mips-boston-disable-eg20t-prefetch.patch
+staging-iio-ad2s90-make-probe-handle-spi_setup-failu.patch
+fpga-altera-cvp-fix-registration-for-cvp-incapable-d.patch
+tools-hv-kvp-fix-a-warning-of-buffer-overflow-with-g.patch
+platform-chrome-don-t-report-ec_mkbp_event_sensor_fi.patch
+staging-iio-ad7780-update-voltage-on-read.patch
+usbnet-smsc95xx-fix-rx-packet-alignment.patch
+drm-rockchip-fix-for-mailbox-read-size.patch
+arm-omap2-hwmod-fix-some-section-annotations.patch
+net-mlx5-eq-use-the-right-place-to-store-read-irq-af.patch
+modpost-validate-symbol-names-also-in-find_elf_symbo.patch
+perf-tools-add-hygon-dhyana-support.patch
+soc-tegra-don-t-leak-device-tree-node-reference.patch
+media-mtk-vcodec-release-device-nodes-in-mtk_vcodec_.patch
+ptp-fix-pass-zero-to-err_ptr-in-ptp_clock_register.patch
+dmaengine-xilinx_dma-remove-__aligned-attribute-on-z.patch
+iio-adc-meson-saradc-check-for-devm_kasprintf-failur.patch
+iio-adc-meson-saradc-fix-internal-clock-names.patch
+iio-accel-kxcjk1013-add-kiox010a-acpi-hardware-id.patch
+media-adv-tc358743-ths8200-fill-in-min-width-height-.patch
+acpi-spcr-consider-baud-rate-0-as-preconfigured-stat.patch
+staging-pi433-fix-potential-null-dereference.patch
+f2fs-move-dir-data-flush-to-write-checkpoint-process.patch
+f2fs-avoid-build-warn-of-fall_through.patch
+f2fs-fix-race-between-write_checkpoint-and-write_beg.patch
+f2fs-fix-wrong-return-value-of-f2fs_acl_create.patch
+i2c-sh_mobile-add-support-for-r8a77990-r-car-e3.patch
+arm64-io-ensure-calls-to-delay-routines-are-ordered-.patch
+sunvdc-do-not-spin-in-an-infinite-loop-when-vio_ldc_.patch
+soc-bcm-brcmstb-don-t-leak-device-tree-node-referenc.patch
+nfsd4-fix-crash-on-writing-v4_end_grace-before-nfsd-.patch
+drm-clear-state-acquire_ctx-before-leaving-drm_atomi.patch
+arm64-io-ensure-value-passed-to-__iormb-is-held-in-a.patch
+thermal-do-not-clear-passive-state-during-system-sle.patch
+firmware-efi-add-null-pointer-checks-in-efivars-api-.patch
+s390-zcrypt-improve-special-ap-message-cmd-handling.patch
+arm64-ftrace-don-t-adjust-the-lr-value.patch
+arm-dts-mmp2-fix-twsi2.patch
+arm-mmp-mmp2-dt-enable-the-clock.patch
+x86-fpu-add-might_fault-to-user_insn.patch
+media-davinci-vpbe-fix-error-handling-in-vpbe_initia.patch
+smack-fix-access-permissions-for-keyring.patch
+usb-dwc3-correct-the-logic-for-checking-trb-full-in-.patch
+usb-hub-delay-hub-autosuspend-if-usb3-port-is-still-.patch
+timekeeping-use-proper-seqcount-initializer.patch
+usb-mtu3-fix-the-issue-about-setfeature-u1-u2_enable.patch
+clk-sunxi-ng-a33-set-clk_set_rate_parent-for-all-aud.patch
+driver-core-move-async_synchronize_full-call.patch
+kobject-return-error-code-if-writing-sys-.-uevent-fa.patch
+ib-hfi1-unreserve-a-reserved-request-when-it-is-comp.patch
+usb-dwc3-trace-add-missing-break-statement-to-make-c.patch
+pinctrl-sx150x-handle-failure-case-of-devm_kstrdup.patch
+iommu-amd-fix-amd_iommu-force_isolation.patch
+arm-dts-fix-omap4430-sdp-ethernet-startup.patch
+mips-bpf-fix-encoding-bug-for-mm_srlv32_op.patch
+media-coda-fix-h.264-deblocking-filter-controls.patch
+arm-dts-fix-up-the-d-link-dir-685-mtd-partition-info.patch
+tracing-have-trace_stack-nr_entries-compare-not-be-s.patch
+watchdog-renesas_wdt-don-t-set-divider-while-watchdo.patch
+usb-dwc3-gadget-disable-csp-for-stream-out-ep.patch
+iommu-arm-smmu-add-support-for-qcom-smmu-v2-variant.patch
+iommu-arm-smmu-v3-use-explicit-mb-when-moving-cons-p.patch
+sata_rcar-fix-deferred-probing.patch
+clk-imx6sl-ensure-mmdc-ch0-handshake-is-bypassed.patch
+cpuidle-big.little-fix-refcount-leak.patch
+opp-use-opp_table-regulators-to-verify-no-regulator-.patch
+i2c-axxia-check-for-error-conditions-first.patch
+phy-sun4i-usb-add-support-for-missing-usb-phy-index.patch
+udf-fix-bug-on-corrupted-inode.patch
+switchtec-fix-switchtec_ioctl_event_idx_all-flags-ov.patch
+selftests-bpf-use-__bpf_constant_htons-in-test_prog..patch
+arm-pxa-avoid-section-mismatch-warning.patch
+asoc-fsl-fix-snd_soc_eukrea_tlv320-build-error-on-i..patch
+arm-mmp-fix-timer_init-calls.patch
+kvm-ppc-book3s-only-report-kvm_cap_spapr_tce_vfio-on.patch
+mmc-bcm2835-recover-from-mmc_send_ext_csd.patch
+mmc-bcm2835-reset-host-on-timeout.patch
+memstick-prevent-memstick-host-from-getting-runtime-.patch
+mmc-sdhci-of-esdhc-fix-timeout-checks.patch
+mmc-sdhci-xenon-fix-timeout-checks.patch
+btrfs-harden-agaist-duplicate-fsid-on-scanned-device.patch
+tty-serial-samsung-properly-set-flags-in-autocts-mod.patch
+perf-test-fix-perf_event_attr-test-failure.patch
+perf-header-fix-unchecked-usage-of-strncpy.patch
+perf-probe-fix-unchecked-usage-of-strncpy.patch
+kvm-s390-unregister-debug-feature-on-failing-arch-in.patch
+arm64-kvm-skip-mmio-insn-after-emulation.patch
+usb-musb-dsps-fix-otg-state-machine.patch
+percpu-convert-spin_lock_irq-to-spin_lock_irqsave.patch
+powerpc-uaccess-fix-warning-error-with-access_ok.patch
+mac80211-fix-radiotap-vendor-presence-bitmap-handlin.patch
+xfrm6_tunnel-fix-spi-check-in-__xfrm6_tunnel_alloc_s.patch
+bluetooth-fix-unnecessary-error-message-for-hci-requ.patch
+mlxsw-spectrum-properly-cleanup-lag-uppers-when-remo.patch
+scsi-smartpqi-correct-host-serial-num-for-ssa.patch
+scsi-smartpqi-correct-volume-status.patch
+scsi-smartpqi-increase-fw-status-register-read-timeo.patch
+cw1200-fix-concurrency-use-after-free-bugs-in-cw1200.patch
+powerpc-perf-fix-thresholding-counter-data-for-unkno.patch
+drbd-narrow-rcu_read_lock-in-drbd_sync_handshake.patch
+drbd-disconnect-if-the-wrong-uuids-are-attached-on-a.patch
+drbd-skip-spurious-timeout-ping-timeo-when-failing-p.patch
+drbd-avoid-clang-warning-about-pointless-switch-stat.patch
+video-clps711x-fb-release-disp-device-node-in-probe.patch
+md-fix-raid10-hang-issue-caused-by-barrier.patch
+fbdev-fbmem-behave-better-with-small-rotated-display.patch
+i40e-define-proper-net_device-neigh_priv_len.patch
+igb-fix-an-issue-that-pme-is-not-enabled-during-runt.patch
+acpi-apei-clear-ghes-block_status-before-panic.patch
+fbdev-fbcon-fix-unregister-crash-when-more-than-one-.patch
+powerpc-mm-fix-reporting-of-kernel-execute-faults-on.patch
+pinctrl-meson-meson8-fix-the-gpio-function-for-the-g.patch
+pinctrl-meson-meson8b-fix-the-gpio-function-for-the-.patch
+kvm-x86-svm-report-msr_ia32_mcg_ext_ctl-as-unsupport.patch
+powerpc-fadump-do-not-allow-hot-remove-memory-from-f.patch
+kvm-change-offset-in-kvm_write_guest_offset_cached-t.patch
+nfs-nfs_compare_mount_options-always-compare-auth-fl.patch
+hwmon-lm80-fix-a-missing-check-of-the-status-of-smbu.patch
+hwmon-lm80-fix-a-missing-check-of-bus-read-in-lm80-p.patch
+seq_buf-make-seq_buf_puts-null-terminate-the-buffer.patch
+crypto-ux500-use-proper-enum-in-cryp_set_dma_transfe.patch
+crypto-ux500-use-proper-enum-in-hash_set_dma_transfe.patch
+mips-ralink-select-config_cpu_mipsr2_irq_vi-on-mt762.patch
+cifs-check-ntwrk_buf_start-for-null-before-dereferen.patch
+um-avoid-marking-pages-with-changed-protection.patch
+niu-fix-missing-checks-of-niu_pci_eeprom_read.patch
+f2fs-fix-sbi-extent_list-corruption-issue.patch
+cgroup-fix-parsing-empty-mount-option-string.patch
+scripts-decode_stacktrace-only-strip-base-path-when-.patch
+ocfs2-don-t-clear-bh-uptodate-for-block-read.patch
+ocfs2-improve-ocfs2-makefile.patch
+isdn-hisax-hfc_pci-fix-a-possible-concurrency-use-af.patch
+gdrom-fix-a-memory-leak-bug.patch
+fsl-fman-use-gfp_atomic-in-memac-tgec-_add_hash_mac_.patch
+block-swim3-fix-ebusy-error-when-re-opening-device-a.patch
+thermal-bcm2835-enable-hwmon-explicitly.patch
+kdb-don-t-back-trace-on-a-cpu-that-didn-t-round-up.patch
+thermal-generic-adc-fix-adc-to-temp-interpolation.patch
+hid-lenovo-add-checks-to-fix-of_led_classdev_registe.patch
+fs-proc-base.c-use-ns_capable-instead-of-capable-for.patch
+kernel-hung_task.c-break-rcu-locks-based-on-jiffies.patch
+proc-sysctl-fix-return-error-for-proc_doulongvec_min.patch
+kernel-hung_task.c-force-console-verbose-before-pani.patch
+fs-epoll-drop-ovflist-branch-prediction.patch
+exec-load_script-don-t-blindly-truncate-shebang-stri.patch
+scripts-gdb-fix-lx-version-string-output.patch
--- /dev/null
+From 31a1ab75210013b2ab3e8c5391608a2b6af4f3a6 Mon Sep 17 00:00:00 2001
+From: Zoran Markovic <zmarkovic@sierrawireless.com>
+Date: Wed, 17 Oct 2018 16:25:44 -0700
+Subject: smack: fix access permissions for keyring
+
+[ Upstream commit 5b841bfab695e3b8ae793172a9ff7990f99cc3e2 ]
+
+Function smack_key_permission() only issues smack requests for the
+following operations:
+ - KEY_NEED_READ (issues MAY_READ)
+ - KEY_NEED_WRITE (issues MAY_WRITE)
+ - KEY_NEED_LINK (issues MAY_WRITE)
+ - KEY_NEED_SETATTR (issues MAY_WRITE)
+A blank smack request is issued in all other cases, resulting in
+smack access being granted if there is any rule defined between
+subject and object, or denied with -EACCES otherwise.
+
+Request MAY_READ access for KEY_NEED_SEARCH and KEY_NEED_VIEW.
+Fix the logic in the unlikely case when both MAY_READ and
+MAY_WRITE are needed. Validate access permission field for valid
+contents.
+
+Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
+Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
+Cc: Casey Schaufler <casey@schaufler-ca.com>
+Cc: James Morris <jmorris@namei.org>
+Cc: "Serge E. Hallyn" <serge@hallyn.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ security/smack/smack_lsm.c | 12 +++++++++---
+ 1 file changed, 9 insertions(+), 3 deletions(-)
+
+diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
+index c8fd5c10b7c6..0d5ce7190b17 100644
+--- a/security/smack/smack_lsm.c
++++ b/security/smack/smack_lsm.c
+@@ -4356,6 +4356,12 @@ static int smack_key_permission(key_ref_t key_ref,
+ int request = 0;
+ int rc;
+
++ /*
++ * Validate requested permissions
++ */
++ if (perm & ~KEY_NEED_ALL)
++ return -EINVAL;
++
+ keyp = key_ref_to_ptr(key_ref);
+ if (keyp == NULL)
+ return -EINVAL;
+@@ -4375,10 +4381,10 @@ static int smack_key_permission(key_ref_t key_ref,
+ ad.a.u.key_struct.key = keyp->serial;
+ ad.a.u.key_struct.key_desc = keyp->description;
+ #endif
+- if (perm & KEY_NEED_READ)
+- request = MAY_READ;
++ if (perm & (KEY_NEED_READ | KEY_NEED_SEARCH | KEY_NEED_VIEW))
++ request |= MAY_READ;
+ if (perm & (KEY_NEED_WRITE | KEY_NEED_LINK | KEY_NEED_SETATTR))
+- request = MAY_WRITE;
++ request |= MAY_WRITE;
+ rc = smk_access(tkp, keyp->security, request, &ad);
+ rc = smk_bu_note("key access", tkp, keyp->security, request, rc);
+ return rc;
+--
+2.19.1
+
--- /dev/null
+From 72e3d211c63dc15d522aa350affb070899958a46 Mon Sep 17 00:00:00 2001
+From: Yangtao Li <tiny.windzz@gmail.com>
+Date: Sat, 24 Nov 2018 09:52:23 -0500
+Subject: soc: bcm: brcmstb: Don't leak device tree node reference
+
+[ Upstream commit 1861a7f07e02292830a1ca256328d370deefea30 ]
+
+of_find_node_by_path() acquires a reference to the node returned by it
+and that reference needs to be dropped by its caller. soc_is_brcmstb()
+doesn't do that, so fix it.
+
+[treding: slightly rewrite to avoid inline comparison]
+
+Fixes: d52fad262041 ("soc: add stubs for brcmstb SoC's")
+Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/soc/bcm/brcmstb/common.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
+index 22e98a90468c..2f5ec424a390 100644
+--- a/drivers/soc/bcm/brcmstb/common.c
++++ b/drivers/soc/bcm/brcmstb/common.c
+@@ -31,13 +31,17 @@ static const struct of_device_id brcmstb_machine_match[] = {
+
+ bool soc_is_brcmstb(void)
+ {
++ const struct of_device_id *match;
+ struct device_node *root;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return false;
+
+- return of_match_node(brcmstb_machine_match, root) != NULL;
++ match = of_match_node(brcmstb_machine_match, root);
++ of_node_put(root);
++
++ return match != NULL;
+ }
+
+ static const struct of_device_id sun_top_ctrl_match[] = {
+--
+2.19.1
+
--- /dev/null
+From d5aea5565a89a7858f55f3ed67f0a639fa111085 Mon Sep 17 00:00:00 2001
+From: Yangtao Li <tiny.windzz@gmail.com>
+Date: Wed, 21 Nov 2018 07:49:12 -0500
+Subject: soc/tegra: Don't leak device tree node reference
+
+[ Upstream commit 9eb40fa2cd2d1f6829e7b49bb22692f754b9cfe0 ]
+
+of_find_node_by_path() acquires a reference to the node returned by it
+and that reference needs to be dropped by its caller. soc_is_tegra()
+doesn't do that, so fix it.
+
+Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
+Acked-by: Jon Hunter <jonathanh@nvidia.com>
+[treding: slightly rewrite to avoid inline comparison]
+Signed-off-by: Thierry Reding <treding@nvidia.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/soc/tegra/common.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/soc/tegra/common.c b/drivers/soc/tegra/common.c
+index cd8f41351add..7bfb154d6fa5 100644
+--- a/drivers/soc/tegra/common.c
++++ b/drivers/soc/tegra/common.c
+@@ -22,11 +22,15 @@ static const struct of_device_id tegra_machine_match[] = {
+
+ bool soc_is_tegra(void)
+ {
++ const struct of_device_id *match;
+ struct device_node *root;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return false;
+
+- return of_match_node(tegra_machine_match, root) != NULL;
++ match = of_match_node(tegra_machine_match, root);
++ of_node_put(root);
++
++ return match != NULL;
+ }
+--
+2.19.1
+
--- /dev/null
+From 7bcbd2602ddf174867c9d1e0175510d1e4fa4484 Mon Sep 17 00:00:00 2001
+From: Matheus Tavares <matheus.bernardino@usp.br>
+Date: Sat, 3 Nov 2018 19:49:44 -0300
+Subject: staging:iio:ad2s90: Make probe handle spi_setup failure
+
+[ Upstream commit b3a3eafeef769c6982e15f83631dcbf8d1794efb ]
+
+Previously, ad2s90_probe ignored the return code from spi_setup, not
+handling its possible failure. This patch makes ad2s90_probe check if
+the code is an error code and, if so, do the following:
+
+- Call dev_err with an appropriate error message.
+- Return the spi_setup's error code.
+
+Note: The 'return ret' statement could be out of the 'if' block, but
+this whole block will be moved up in the function in the patch:
+'staging:iio:ad2s90: Move device registration to the end of probe'.
+
+Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/staging/iio/resolver/ad2s90.c | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
+index b2270908f26f..cbee9ad00f0d 100644
+--- a/drivers/staging/iio/resolver/ad2s90.c
++++ b/drivers/staging/iio/resolver/ad2s90.c
+@@ -86,7 +86,12 @@ static int ad2s90_probe(struct spi_device *spi)
+ /* need 600ns between CS and the first falling edge of SCLK */
+ spi->max_speed_hz = 830000;
+ spi->mode = SPI_MODE_3;
+- spi_setup(spi);
++ ret = spi_setup(spi);
++
++ if (ret < 0) {
++ dev_err(&spi->dev, "spi_setup failed!\n");
++ return ret;
++ }
+
+ return 0;
+ }
+--
+2.19.1
+
--- /dev/null
+From 27eb4f9d0fbb2b40b472e6ca13902ef73c80a392 Mon Sep 17 00:00:00 2001
+From: Renato Lui Geh <renatogeh@gmail.com>
+Date: Mon, 5 Nov 2018 17:14:58 -0200
+Subject: staging: iio: ad7780: update voltage on read
+
+[ Upstream commit 336650c785b62c3bea7c8cf6061c933a90241f67 ]
+
+The ad7780 driver previously did not read the correct device output, as
+it read an outdated value set at initialization. It now updates its
+voltage on read.
+
+Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
+Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/staging/iio/adc/ad7780.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
+index dec3ba6eba8a..52613f6a9dd8 100644
+--- a/drivers/staging/iio/adc/ad7780.c
++++ b/drivers/staging/iio/adc/ad7780.c
+@@ -87,12 +87,16 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
+ long m)
+ {
+ struct ad7780_state *st = iio_priv(indio_dev);
++ int voltage_uv;
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ return ad_sigma_delta_single_conversion(indio_dev, chan, val);
+ case IIO_CHAN_INFO_SCALE:
+- *val = st->int_vref_mv * st->gain;
++ voltage_uv = regulator_get_voltage(st->reg);
++ if (voltage_uv < 0)
++ return voltage_uv;
++ *val = (voltage_uv / 1000) * st->gain;
+ *val2 = chan->scan_type.realbits - 1;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_CHAN_INFO_OFFSET:
+--
+2.19.1
+
--- /dev/null
+From d44c03af1097b3872bb79b919051ed047f003e43 Mon Sep 17 00:00:00 2001
+From: Slawomir Stepien <sst@poczta.fm>
+Date: Sat, 20 Oct 2018 23:04:11 +0200
+Subject: staging: iio: adc: ad7280a: handle error from __ad7280_read32()
+
+[ Upstream commit 0559ef7fde67bc6c83c6eb6329dbd6649528263e ]
+
+Inside __ad7280_read32(), the spi_sync_transfer() can fail with negative
+error code. This change will ensure that this error is being passed up
+in the call stack, so it can be handled.
+
+Signed-off-by: Slawomir Stepien <sst@poczta.fm>
+Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/staging/iio/adc/ad7280a.c | 17 +++++++++++++----
+ 1 file changed, 13 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
+index f85dde9805e0..f17f700ea04f 100644
+--- a/drivers/staging/iio/adc/ad7280a.c
++++ b/drivers/staging/iio/adc/ad7280a.c
+@@ -256,7 +256,9 @@ static int ad7280_read(struct ad7280_state *st, unsigned int devaddr,
+ if (ret)
+ return ret;
+
+- __ad7280_read32(st, &tmp);
++ ret = __ad7280_read32(st, &tmp);
++ if (ret)
++ return ret;
+
+ if (ad7280_check_crc(st, tmp))
+ return -EIO;
+@@ -294,7 +296,9 @@ static int ad7280_read_channel(struct ad7280_state *st, unsigned int devaddr,
+
+ ad7280_delay(st);
+
+- __ad7280_read32(st, &tmp);
++ ret = __ad7280_read32(st, &tmp);
++ if (ret)
++ return ret;
+
+ if (ad7280_check_crc(st, tmp))
+ return -EIO;
+@@ -327,7 +331,9 @@ static int ad7280_read_all_channels(struct ad7280_state *st, unsigned int cnt,
+ ad7280_delay(st);
+
+ for (i = 0; i < cnt; i++) {
+- __ad7280_read32(st, &tmp);
++ ret = __ad7280_read32(st, &tmp);
++ if (ret)
++ return ret;
+
+ if (ad7280_check_crc(st, tmp))
+ return -EIO;
+@@ -370,7 +376,10 @@ static int ad7280_chain_setup(struct ad7280_state *st)
+ return ret;
+
+ for (n = 0; n <= AD7280A_MAX_CHAIN; n++) {
+- __ad7280_read32(st, &val);
++ ret = __ad7280_read32(st, &val);
++ if (ret)
++ return ret;
++
+ if (val == 0)
+ return n - 1;
+
+--
+2.19.1
+
--- /dev/null
+From 48f4f6835a0c749b412824711b86f11526e46f18 Mon Sep 17 00:00:00 2001
+From: Michael Straube <straube.linux@gmail.com>
+Date: Sun, 25 Nov 2018 10:22:25 +0100
+Subject: staging: pi433: fix potential null dereference
+
+[ Upstream commit 64c4c4ca6c129a4191e8e1e91b2d5d9b8d08c518 ]
+
+Add a test for successful call to cdev_alloc() to avoid
+potential null dereference. Issue reported by smatch.
+
+Signed-off-by: Michael Straube <straube.linux@gmail.com>
+Fixes: 874bcba65f9a ("staging: pi433: New driver")
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/staging/pi433/pi433_if.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/drivers/staging/pi433/pi433_if.c b/drivers/staging/pi433/pi433_if.c
+index 93c01680f016..5be40bdc191b 100644
+--- a/drivers/staging/pi433/pi433_if.c
++++ b/drivers/staging/pi433/pi433_if.c
+@@ -1210,6 +1210,10 @@ static int pi433_probe(struct spi_device *spi)
+
+ /* create cdev */
+ device->cdev = cdev_alloc();
++ if (!device->cdev) {
++ dev_dbg(device->dev, "allocation of cdev failed");
++ goto cdev_failed;
++ }
+ device->cdev->owner = THIS_MODULE;
+ cdev_init(device->cdev, &pi433_fops);
+ retval = cdev_add(device->cdev, device->devt, 1);
+--
+2.19.1
+
--- /dev/null
+From 4a5881f6fb25115e7dd336733e0a17e038435309 Mon Sep 17 00:00:00 2001
+From: Young Xiao <YangX92@hotmail.com>
+Date: Wed, 28 Nov 2018 12:36:39 +0000
+Subject: sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns
+ EAGAIN
+
+[ Upstream commit a11f6ca9aef989b56cd31ff4ee2af4fb31a172ec ]
+
+__vdc_tx_trigger should only loop on EAGAIN a finite
+number of times.
+
+See commit adddc32d6fde ("sunvnet: Do not spin in an
+infinite loop when vio_ldc_send() returns EAGAIN") for detail.
+
+Signed-off-by: Young Xiao <YangX92@hotmail.com>
+Signed-off-by: Jens Axboe <axboe@kernel.dk>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/block/sunvdc.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
+index ad9749463d4f..ed4d6276e94f 100644
+--- a/drivers/block/sunvdc.c
++++ b/drivers/block/sunvdc.c
+@@ -41,6 +41,8 @@ MODULE_VERSION(DRV_MODULE_VERSION);
+ #define WAITING_FOR_GEN_CMD 0x04
+ #define WAITING_FOR_ANY -1
+
++#define VDC_MAX_RETRIES 10
++
+ static struct workqueue_struct *sunvdc_wq;
+
+ struct vdc_req_entry {
+@@ -427,6 +429,7 @@ static int __vdc_tx_trigger(struct vdc_port *port)
+ .end_idx = dr->prod,
+ };
+ int err, delay;
++ int retries = 0;
+
+ hdr.seq = dr->snd_nxt;
+ delay = 1;
+@@ -439,6 +442,8 @@ static int __vdc_tx_trigger(struct vdc_port *port)
+ udelay(delay);
+ if ((delay <<= 1) > 128)
+ delay = 128;
++ if (retries++ > VDC_MAX_RETRIES)
++ break;
+ } while (err == -EAGAIN);
+
+ if (err == -ENOTCONN)
+--
+2.19.1
+
--- /dev/null
+From ef4495ff459cb165f283c46d4a50683817049aca Mon Sep 17 00:00:00 2001
+From: Joey Zhang <joey.zhang@microchip.com>
+Date: Mon, 10 Dec 2018 17:12:22 +0800
+Subject: switchtec: Fix SWITCHTEC_IOCTL_EVENT_IDX_ALL flags overwrite
+
+[ Upstream commit e4a7dca5de625018b29417ecc39dc5037d9a5a36 ]
+
+In the ioctl_event_ctl() SWITCHTEC_IOCTL_EVENT_IDX_ALL case, we call
+event_ctl() several times with the same "ctl" struct. Each call clobbers
+ctl.flags, which leads to the problem that we may not actually enable or
+disable all events as the user requested.
+
+Preserve the event flag value with a temporary variable.
+
+Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver")
+Signed-off-by: Joey Zhang <joey.zhang@microchip.com>
+Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
+[bhelgaas: changelog]
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/pci/switch/switchtec.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
+index 620f5b995a12..e3aefdafae89 100644
+--- a/drivers/pci/switch/switchtec.c
++++ b/drivers/pci/switch/switchtec.c
+@@ -1064,6 +1064,7 @@ static int ioctl_event_ctl(struct switchtec_dev *stdev,
+ {
+ int ret;
+ int nr_idxs;
++ unsigned int event_flags;
+ struct switchtec_ioctl_event_ctl ctl;
+
+ if (copy_from_user(&ctl, uctl, sizeof(ctl)))
+@@ -1085,7 +1086,9 @@ static int ioctl_event_ctl(struct switchtec_dev *stdev,
+ else
+ return -EINVAL;
+
++ event_flags = ctl.flags;
+ for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
++ ctl.flags = event_flags;
+ ret = event_ctl(stdev, &ctl);
+ if (ret < 0)
+ return ret;
+--
+2.19.1
+
--- /dev/null
+From 0ea38d8c1385b2c3d57a60e0bc2b81c8e40c8169 Mon Sep 17 00:00:00 2001
+From: Matthias Brugger <mbrugger@suse.com>
+Date: Sun, 21 Oct 2018 23:58:48 +0200
+Subject: thermal: bcm2835: enable hwmon explicitly
+
+[ Upstream commit d56c19d07e0bc3ceff366a49b7d7a2440c967b1b ]
+
+By defaul of-based thermal driver do not enable hwmon.
+This patch does this explicitly, so that the temperature can be read
+through the common hwmon sysfs.
+
+Signed-off-by: Matthias Brugger <mbrugger@suse.com>
+Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
+Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/thermal/broadcom/bcm2835_thermal.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
+index 23ad4f9f2143..24b006a95142 100644
+--- a/drivers/thermal/broadcom/bcm2835_thermal.c
++++ b/drivers/thermal/broadcom/bcm2835_thermal.c
+@@ -27,6 +27,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/thermal.h>
+
++#include "../thermal_hwmon.h"
++
+ #define BCM2835_TS_TSENSCTL 0x00
+ #define BCM2835_TS_TSENSSTAT 0x04
+
+@@ -275,6 +277,15 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
+
+ platform_set_drvdata(pdev, tz);
+
++ /*
++ * Thermal_zone doesn't enable hwmon as default,
++ * enable it here
++ */
++ tz->tzp->no_hwmon = false;
++ err = thermal_add_hwmon_sysfs(tz);
++ if (err)
++ goto err_tz;
++
+ bcm2835_thermal_debugfs(pdev);
+
+ return 0;
+--
+2.19.1
+
--- /dev/null
+From cb9fbbbbdd8a664c72443710764e927ff88eebad Mon Sep 17 00:00:00 2001
+From: Wei Wang <wvw@google.com>
+Date: Wed, 7 Nov 2018 14:36:11 -0800
+Subject: Thermal: do not clear passive state during system sleep
+
+[ Upstream commit 964f4843a455d2ffb199512b08be8d5f077c4cac ]
+
+commit ff140fea847e ("Thermal: handle thermal zone device properly
+during system sleep") added PM hook to call thermal zone reset during
+sleep. However resetting thermal zone will also clear the passive state
+and thus cancel the polling queue which leads the passive cooling device
+state not being cleared properly after sleep.
+
+thermal_pm_notify => thermal_zone_device_reset set passive to 0
+thermal_zone_trip_update will skip update passive as `old_target ==
+instance->target'.
+monitor_thermal_zone => thermal_zone_device_set_polling will cancel
+tz->poll_queue, so the cooling device state will not be changed
+afterwards.
+
+Reported-by: Kame Wang <kamewang@google.com>
+Signed-off-by: Wei Wang <wvw@google.com>
+Signed-off-by: Zhang Rui <rui.zhang@intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/thermal/thermal_core.c | 12 ++++++++----
+ 1 file changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
+index 2b1b0ba393a4..17d6079c7642 100644
+--- a/drivers/thermal/thermal_core.c
++++ b/drivers/thermal/thermal_core.c
+@@ -454,16 +454,20 @@ static void update_temperature(struct thermal_zone_device *tz)
+ tz->last_temperature, tz->temperature);
+ }
+
+-static void thermal_zone_device_reset(struct thermal_zone_device *tz)
++static void thermal_zone_device_init(struct thermal_zone_device *tz)
+ {
+ struct thermal_instance *pos;
+-
+ tz->temperature = THERMAL_TEMP_INVALID;
+- tz->passive = 0;
+ list_for_each_entry(pos, &tz->thermal_instances, tz_node)
+ pos->initialized = false;
+ }
+
++static void thermal_zone_device_reset(struct thermal_zone_device *tz)
++{
++ tz->passive = 0;
++ thermal_zone_device_init(tz);
++}
++
+ void thermal_zone_device_update(struct thermal_zone_device *tz,
+ enum thermal_notify_event event)
+ {
+@@ -1503,7 +1507,7 @@ static int thermal_pm_notify(struct notifier_block *nb,
+ case PM_POST_SUSPEND:
+ atomic_set(&in_suspend, 0);
+ list_for_each_entry(tz, &thermal_tz_list, node) {
+- thermal_zone_device_reset(tz);
++ thermal_zone_device_init(tz);
+ thermal_zone_device_update(tz,
+ THERMAL_EVENT_UNSPECIFIED);
+ }
+--
+2.19.1
+
--- /dev/null
+From 480d3771eb4a34ad8f4240aa80d2a6b1711fa53c Mon Sep 17 00:00:00 2001
+From: Bjorn Andersson <bjorn.andersson@linaro.org>
+Date: Sun, 23 Dec 2018 23:26:44 -0800
+Subject: thermal: generic-adc: Fix adc to temp interpolation
+
+[ Upstream commit 9d216211fded20fff301d0317af3238d8383634c ]
+
+First correct the edge case to return the last element if we're
+outside the range, rather than at the last element, so that
+interpolation is not omitted for points between the two last entries in
+the table.
+
+Then correct the formula to perform linear interpolation based the two
+points surrounding the read ADC value. The indices for temp are kept as
+"hi" and "lo" to pair with the adc indices, but there's no requirement
+that the temperature is provided in descendent order. mult_frac() is
+used to prevent issues with overflowing the int.
+
+Cc: Laxman Dewangan <ldewangan@nvidia.com>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/thermal/thermal-generic-adc.c | 12 ++++++++----
+ 1 file changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
+index 73f55d6a1721..ad601e5b4175 100644
+--- a/drivers/thermal/thermal-generic-adc.c
++++ b/drivers/thermal/thermal-generic-adc.c
+@@ -26,7 +26,7 @@ struct gadc_thermal_info {
+
+ static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
+ {
+- int temp, adc_hi, adc_lo;
++ int temp, temp_hi, temp_lo, adc_hi, adc_lo;
+ int i;
+
+ for (i = 0; i < gti->nlookup_table; i++) {
+@@ -36,13 +36,17 @@ static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
+
+ if (i == 0) {
+ temp = gti->lookup_table[0];
+- } else if (i >= (gti->nlookup_table - 1)) {
++ } else if (i >= gti->nlookup_table) {
+ temp = gti->lookup_table[2 * (gti->nlookup_table - 1)];
+ } else {
+ adc_hi = gti->lookup_table[2 * i - 1];
+ adc_lo = gti->lookup_table[2 * i + 1];
+- temp = gti->lookup_table[2 * i];
+- temp -= ((val - adc_lo) * 1000) / (adc_hi - adc_lo);
++
++ temp_hi = gti->lookup_table[2 * i - 2];
++ temp_lo = gti->lookup_table[2 * i];
++
++ temp = temp_hi + mult_frac(temp_lo - temp_hi, val - adc_hi,
++ adc_lo - adc_hi);
+ }
+
+ return temp;
+--
+2.19.1
+
--- /dev/null
+From dc3bf866c4770e5af7109da10e5262f936b3f3e2 Mon Sep 17 00:00:00 2001
+From: Bart Van Assche <bvanassche@acm.org>
+Date: Wed, 28 Nov 2018 15:43:09 -0800
+Subject: timekeeping: Use proper seqcount initializer
+
+[ Upstream commit ce10a5b3954f2514af726beb78ed8d7350c5e41c ]
+
+tk_core.seq is initialized open coded, but that misses to initialize the
+lockdep map when lockdep is enabled. Lockdep splats involving tk_core seq
+consequently lack a name and are hard to read.
+
+Use the proper initializer which takes care of the lockdep map
+initialization.
+
+[ tglx: Massaged changelog ]
+
+Signed-off-by: Bart Van Assche <bvanassche@acm.org>
+Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
+Cc: peterz@infradead.org
+Cc: tj@kernel.org
+Cc: johannes.berg@intel.com
+Link: https://lkml.kernel.org/r/20181128234325.110011-12-bvanassche@acm.org
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ kernel/time/timekeeping.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
+index 2cafb49aa65e..1ce7c404d0b0 100644
+--- a/kernel/time/timekeeping.c
++++ b/kernel/time/timekeeping.c
+@@ -41,7 +41,9 @@
+ static struct {
+ seqcount_t seq;
+ struct timekeeper timekeeper;
+-} tk_core ____cacheline_aligned;
++} tk_core ____cacheline_aligned = {
++ .seq = SEQCNT_ZERO(tk_core.seq),
++};
+
+ static DEFINE_RAW_SPINLOCK(timekeeper_lock);
+ static struct timekeeper shadow_timekeeper;
+--
+2.19.1
+
--- /dev/null
+From a60633336183a7a32e480faa70cd295f0ab40605 Mon Sep 17 00:00:00 2001
+From: Dexuan Cui <decui@microsoft.com>
+Date: Thu, 18 Oct 2018 05:09:32 +0000
+Subject: Tools: hv: kvp: Fix a warning of buffer overflow with gcc 8.0.1
+
+[ Upstream commit 4fcba7802c3e15a6e56e255871d6c72f829b9dd8 ]
+
+The patch fixes:
+
+hv_kvp_daemon.c: In function 'kvp_set_ip_info':
+hv_kvp_daemon.c:1305:2: note: 'snprintf' output between 41 and 4136 bytes
+into a destination of size 4096
+
+The "(unsigned int)str_len" is to avoid:
+
+hv_kvp_daemon.c:1309:30: warning: comparison of integer expressions of
+different signedness: 'int' and 'long unsigned int' [-Wsign-compare]
+
+Signed-off-by: Dexuan Cui <decui@microsoft.com>
+Cc: K. Y. Srinivasan <kys@microsoft.com>
+Cc: Haiyang Zhang <haiyangz@microsoft.com>
+Cc: Stephen Hemminger <sthemmin@microsoft.com>
+Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ tools/hv/hv_kvp_daemon.c | 15 +++++++++++++--
+ 1 file changed, 13 insertions(+), 2 deletions(-)
+
+diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
+index 3965186b375a..62c9a503ae05 100644
+--- a/tools/hv/hv_kvp_daemon.c
++++ b/tools/hv/hv_kvp_daemon.c
+@@ -1172,6 +1172,7 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ FILE *file;
+ char cmd[PATH_MAX];
+ char *mac_addr;
++ int str_len;
+
+ /*
+ * Set the configuration for the specified interface with
+@@ -1295,8 +1296,18 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
+ * invoke the external script to do its magic.
+ */
+
+- snprintf(cmd, sizeof(cmd), KVP_SCRIPTS_PATH "%s %s",
+- "hv_set_ifconfig", if_file);
++ str_len = snprintf(cmd, sizeof(cmd), KVP_SCRIPTS_PATH "%s %s",
++ "hv_set_ifconfig", if_file);
++ /*
++ * This is a little overcautious, but it's necessary to suppress some
++ * false warnings from gcc 8.0.1.
++ */
++ if (str_len <= 0 || (unsigned int)str_len >= sizeof(cmd)) {
++ syslog(LOG_ERR, "Cmd '%s' (len=%d) may be too long",
++ cmd, str_len);
++ return HV_E_FAIL;
++ }
++
+ if (system(cmd)) {
+ syslog(LOG_ERR, "Failed to execute cmd '%s'; error: %d %s",
+ cmd, errno, strerror(errno));
+--
+2.19.1
+
--- /dev/null
+From ad41aeaf4dd5895c7f0ab6b438373ee778dfb151 Mon Sep 17 00:00:00 2001
+From: Dan Carpenter <dan.carpenter@oracle.com>
+Date: Wed, 20 Jun 2018 14:08:00 +0300
+Subject: tracing: Have trace_stack nr_entries compare not be so subtle
+
+[ Upstream commit ca16b0fbb05242f18da9d810c07d3882ffed831c ]
+
+Dan Carpenter reviewed the trace_stack.c code and figured he found an off by
+one bug.
+
+ "From reviewing the code, it seems possible for
+ stack_trace_max.nr_entries to be set to .max_entries and in that case we
+ would be reading one element beyond the end of the stack_dump_trace[]
+ array. If it's not set to .max_entries then the bug doesn't affect
+ runtime."
+
+Although it looks to be the case, it is not. Because we have:
+
+ static unsigned long stack_dump_trace[STACK_TRACE_ENTRIES+1] =
+ { [0 ... (STACK_TRACE_ENTRIES)] = ULONG_MAX };
+
+ struct stack_trace stack_trace_max = {
+ .max_entries = STACK_TRACE_ENTRIES - 1,
+ .entries = &stack_dump_trace[0],
+ };
+
+And:
+
+ stack_trace_max.nr_entries = x;
+ for (; x < i; x++)
+ stack_dump_trace[x] = ULONG_MAX;
+
+Even if nr_entries equals max_entries, indexing with it into the
+stack_dump_trace[] array will not overflow the array. But if it is the case,
+the second part of the conditional that tests stack_dump_trace[nr_entries]
+to ULONG_MAX will always be true.
+
+By applying Dan's patch, it removes the subtle aspect of it and makes the if
+conditional slightly more efficient.
+
+Link: http://lkml.kernel.org/r/20180620110758.crunhd5bfep7zuiz@kili.mountain
+
+Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
+Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ kernel/trace/trace_stack.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
+index 719a52a4064a..ba662010542c 100644
+--- a/kernel/trace/trace_stack.c
++++ b/kernel/trace/trace_stack.c
+@@ -282,7 +282,7 @@ __next(struct seq_file *m, loff_t *pos)
+ {
+ long n = *pos - 1;
+
+- if (n > stack_trace_max.nr_entries || stack_dump_trace[n] == ULONG_MAX)
++ if (n >= stack_trace_max.nr_entries || stack_dump_trace[n] == ULONG_MAX)
+ return NULL;
+
+ m->private = (void *)n;
+--
+2.19.1
+
--- /dev/null
+From ea817d796ee5b0d5228077d6598e7dec198a3da6 Mon Sep 17 00:00:00 2001
+From: Beomho Seo <beomho.seo@samsung.com>
+Date: Fri, 14 Dec 2018 12:34:08 +0100
+Subject: tty: serial: samsung: Properly set flags in autoCTS mode
+
+[ Upstream commit 31e933645742ee6719d37573a27cce0761dcf92b ]
+
+Commit 391f93f2ec9f ("serial: core: Rework hw-assited flow control support")
+has changed the way the autoCTS mode is handled.
+
+According to that change, serial drivers which enable H/W autoCTS mode must
+set UPSTAT_AUTOCTS to prevent the serial core from inadvertently disabling
+TX. This patch adds proper handling of UPSTAT_AUTOCTS flag.
+
+Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
+[mszyprow: rephrased commit message]
+Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/tty/serial/samsung.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
+index 57baa84ccf86..f4b8e4e17a86 100644
+--- a/drivers/tty/serial/samsung.c
++++ b/drivers/tty/serial/samsung.c
+@@ -1343,11 +1343,14 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
+ wr_regl(port, S3C2410_ULCON, ulcon);
+ wr_regl(port, S3C2410_UBRDIV, quot);
+
++ port->status &= ~UPSTAT_AUTOCTS;
++
+ umcon = rd_regl(port, S3C2410_UMCON);
+ if (termios->c_cflag & CRTSCTS) {
+ umcon |= S3C2410_UMCOM_AFC;
+ /* Disable RTS when RX FIFO contains 63 bytes */
+ umcon &= ~S3C2412_UMCON_AFC_8;
++ port->status = UPSTAT_AUTOCTS;
+ } else {
+ umcon &= ~S3C2410_UMCOM_AFC;
+ }
+--
+2.19.1
+
--- /dev/null
+From 3acd7f170510132873ad093946bb28356259aa02 Mon Sep 17 00:00:00 2001
+From: Jan Kara <jack@suse.cz>
+Date: Wed, 12 Dec 2018 14:29:20 +0100
+Subject: udf: Fix BUG on corrupted inode
+
+[ Upstream commit d288d95842f1503414b7eebce3773bac3390457e ]
+
+When inode is corrupted so that extent type is invalid, some functions
+(such as udf_truncate_extents()) will just BUG. Check that extent type
+is valid when loading the inode to memory.
+
+Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
+Signed-off-by: Jan Kara <jack@suse.cz>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ fs/udf/inode.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/fs/udf/inode.c b/fs/udf/inode.c
+index 8dacf4f57414..28b9d7cca29b 100644
+--- a/fs/udf/inode.c
++++ b/fs/udf/inode.c
+@@ -1357,6 +1357,12 @@ reread:
+
+ iinfo->i_alloc_type = le16_to_cpu(fe->icbTag.flags) &
+ ICBTAG_FLAG_AD_MASK;
++ if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_SHORT &&
++ iinfo->i_alloc_type != ICBTAG_FLAG_AD_LONG &&
++ iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
++ ret = -EIO;
++ goto out;
++ }
+ iinfo->i_unique = 0;
+ iinfo->i_lenEAttr = 0;
+ iinfo->i_lenExtents = 0;
+--
+2.19.1
+
--- /dev/null
+From 81fae484f15758662e213560c3c950ef1020edab Mon Sep 17 00:00:00 2001
+From: Anton Ivanov <anton.ivanov@cambridgegreys.com>
+Date: Wed, 5 Dec 2018 12:37:41 +0000
+Subject: um: Avoid marking pages with "changed protection"
+
+[ Upstream commit 8892d8545f2d0342b9c550defbfb165db237044b ]
+
+Changing protection is a very high cost operation in UML
+because in addition to an extra syscall it also interrupts
+mmap merge sequences generated by the tlb.
+
+While the condition is not particularly common it is worth
+avoiding.
+
+Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
+Signed-off-by: Richard Weinberger <richard@nod.at>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/um/include/asm/pgtable.h | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
+index 7485398d0737..9c04562310b3 100644
+--- a/arch/um/include/asm/pgtable.h
++++ b/arch/um/include/asm/pgtable.h
+@@ -197,12 +197,17 @@ static inline pte_t pte_mkold(pte_t pte)
+
+ static inline pte_t pte_wrprotect(pte_t pte)
+ {
+- pte_clear_bits(pte, _PAGE_RW);
++ if (likely(pte_get_bits(pte, _PAGE_RW)))
++ pte_clear_bits(pte, _PAGE_RW);
++ else
++ return pte;
+ return(pte_mknewprot(pte));
+ }
+
+ static inline pte_t pte_mkread(pte_t pte)
+ {
++ if (unlikely(pte_get_bits(pte, _PAGE_USER)))
++ return pte;
+ pte_set_bits(pte, _PAGE_USER);
+ return(pte_mknewprot(pte));
+ }
+@@ -221,6 +226,8 @@ static inline pte_t pte_mkyoung(pte_t pte)
+
+ static inline pte_t pte_mkwrite(pte_t pte)
+ {
++ if (unlikely(pte_get_bits(pte, _PAGE_RW)))
++ return pte;
+ pte_set_bits(pte, _PAGE_RW);
+ return(pte_mknewprot(pte));
+ }
+--
+2.19.1
+
--- /dev/null
+From 8c6635836e271c9f899dedbcc09d898d4330fada Mon Sep 17 00:00:00 2001
+From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
+Date: Sat, 1 Dec 2018 16:43:29 +0530
+Subject: usb: dwc3: Correct the logic for checking TRB full in
+ __dwc3_prepare_one_trb()
+
+[ Upstream commit b7a4fbe2300a8965ea760c7e871507b84aea17f6 ]
+
+Availability of TRB's is calculated using dwc3_calc_trbs_left(), which
+determines total available TRB's based on the HWO bit set in a TRB.
+
+In the present code, __dwc3_prepare_one_trb() is called with a TRB which
+needs to be prepared for transfer. This __dwc3_prepare_one_trb() calls
+dwc3_calc_trbs_left() to determine total available TRBs and set IOC bit
+if the total available TRBs are zero. Since the present working TRB (which
+is passed as an argument to __dwc3_prepare_one_trb() ) doesn't yet have
+the HWO bit set before calling dwc3_calc_trbs_left(), there are chances
+that dwc3_calc_trbs_left() wrongly calculates this present working TRB
+as free(since the HWO bit is not yet set) and returns the total available
+TRBs as greater than zero (including the present working TRB). This could
+be a problem.
+
+This patch corrects the above mentioned problem in __dwc3_prepare_one_trb()
+by increementing the dep->trb_enqueue at the last (after preparing the TRB)
+instead of increementing at the start and setting the IOC bit only if the
+total available TRBs returned by dwc3_calc_trbs_left() is 1 . Since we are
+increementing the dep->trb_enqueue at the last, the present working TRB is
+also considered as available by dwc3_calc_trbs_left() and non zero value is
+returned . So, according to the modified logic, when the total available
+TRBs is equal to 1 that means the total available TRBs in the pool are 0.
+
+Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
+Reviewed-by: Thinh Nguyen <thinhn@synopsys.com>
+Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/usb/dwc3/gadget.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
+index 727bf3c9f53b..b80eefa355b6 100644
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -890,8 +890,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
+ struct usb_gadget *gadget = &dwc->gadget;
+ enum usb_device_speed speed = gadget->speed;
+
+- dwc3_ep_inc_enq(dep);
+-
+ trb->size = DWC3_TRB_SIZE_LENGTH(length);
+ trb->bpl = lower_32_bits(dma);
+ trb->bph = upper_32_bits(dma);
+@@ -970,7 +968,7 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
+ }
+
+ if ((!no_interrupt && !chain) ||
+- (dwc3_calc_trbs_left(dep) == 0))
++ (dwc3_calc_trbs_left(dep) == 1))
+ trb->ctrl |= DWC3_TRB_CTRL_IOC;
+
+ if (chain)
+@@ -981,6 +979,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
+
+ trb->ctrl |= DWC3_TRB_CTRL_HWO;
+
++ dwc3_ep_inc_enq(dep);
++
+ trace_dwc3_prepare_trb(dep, trb);
+ }
+
+--
+2.19.1
+
--- /dev/null
+From 244bfa60f942ed45d32c9637faf8762c430e0903 Mon Sep 17 00:00:00 2001
+From: Tejas Joglekar <tejas.joglekar@synopsys.com>
+Date: Mon, 10 Dec 2018 16:08:13 +0530
+Subject: usb: dwc3: gadget: Disable CSP for stream OUT ep
+
+[ Upstream commit 244add8ebfb231c39db9e33b204bd0ce8f24f782 ]
+
+In stream mode, when fast-forwarding TRBs, the stream number
+is not cleared causing the new stream to not get assigned. So
+we don't want controller to carry on transfers when short packet
+is received. So disable the CSP for stream capable endpoint.
+
+This is based on the 3.30a Programming guide, where table 3-1
+device descriptor structure field definitions says for CSP bit
+If this bit is 0, the controller generates an XferComplete event
+and remove the stream. So if we keep CSP as 1 then switching between
+streams would not happen as in stream mode, when fast-forwarding
+TRBs, the stream number is not cleared causing the new stream to not get
+assigned.
+
+Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/usb/dwc3/gadget.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
+index b80eefa355b6..5b34994b7b08 100644
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -959,9 +959,13 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
+ usb_endpoint_type(dep->endpoint.desc));
+ }
+
+- /* always enable Continue on Short Packet */
++ /*
++ * Enable Continue on Short Packet
++ * when endpoint is not a stream capable
++ */
+ if (usb_endpoint_dir_out(dep->endpoint.desc)) {
+- trb->ctrl |= DWC3_TRB_CTRL_CSP;
++ if (!dep->stream_capable)
++ trb->ctrl |= DWC3_TRB_CTRL_CSP;
+
+ if (short_not_ok)
+ trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+--
+2.19.1
+
--- /dev/null
+From 6f360f5a21efab9c3258d3465dd4a9f2d845be1d Mon Sep 17 00:00:00 2001
+From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Date: Mon, 3 Dec 2018 11:28:47 +0200
+Subject: usb: dwc3: trace: add missing break statement to make compiler happy
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 54d48183d21e03f780053d7129312049cb5dd591 ]
+
+The missed break statement in the outer switch makes the code fall through
+always and thus always same value will be printed.
+
+Besides that, compiler warns about missed fall through marker:
+
+drivers/usb/dwc3/./trace.h: In function ‘trace_raw_output_dwc3_log_trb’:
+drivers/usb/dwc3/./trace.h:246:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
+ switch (pcm) {
+ ^~~~~~
+
+Add the missing break statement to work correctly without compilation
+warnings.
+
+Fixes: fa8d965d736b ("usb: dwc3: trace: pretty print high-bandwidth transfers too")
+Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
+Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/usb/dwc3/trace.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
+index 6504b116da04..62ec20a26013 100644
+--- a/drivers/usb/dwc3/trace.h
++++ b/drivers/usb/dwc3/trace.h
+@@ -262,9 +262,11 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
+ s = "2x ";
+ break;
+ case 3:
++ default:
+ s = "3x ";
+ break;
+ }
++ break;
+ default:
+ s = "";
+ } s; }),
+--
+2.19.1
+
--- /dev/null
+From d73a84fd26bfb54138a6da599e17dbc05f66bfbd Mon Sep 17 00:00:00 2001
+From: Mathias Nyman <mathias.nyman@linux.intel.com>
+Date: Wed, 28 Nov 2018 15:55:21 +0200
+Subject: usb: hub: delay hub autosuspend if USB3 port is still link training
+
+[ Upstream commit e86108940e541febf35813402ff29fa6f4a9ac0b ]
+
+When initializing a hub we want to give a USB3 port in link training
+the same debounce delay time before autosuspening the hub as already
+trained, connected enabled ports.
+
+USB3 ports won't reach the enabled state with "current connect status" and
+"connect status change" bits set until the USB3 link training finishes.
+
+Catching the port in link training (polling) and adding the debounce delay
+prevents unnecessary failed attempts to autosuspend the hub.
+
+Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
+Acked-by: Alan Stern <stern@rowland.harvard.edu>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/usb/core/hub.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index a073cb5be013..4a4e666a8e09 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -1110,6 +1110,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
+ USB_PORT_FEAT_ENABLE);
+ }
+
++ /*
++ * Add debounce if USB3 link is in polling/link training state.
++ * Link will automatically transition to Enabled state after
++ * link training completes.
++ */
++ if (hub_is_superspeed(hdev) &&
++ ((portstatus & USB_PORT_STAT_LINK_STATE) ==
++ USB_SS_PORT_LS_POLLING))
++ need_debounce_delay = true;
++
+ /* Clear status-change flags; we'll debounce later */
+ if (portchange & USB_PORT_STAT_C_CONNECTION) {
+ need_debounce_delay = true;
+--
+2.19.1
+
--- /dev/null
+From aabf339e94eb6fdd6d73f6a5d4324f3fcb87abbf Mon Sep 17 00:00:00 2001
+From: Chunfeng Yun <chunfeng.yun@mediatek.com>
+Date: Thu, 29 Nov 2018 10:34:34 +0800
+Subject: usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
+
+[ Upstream commit a0678e2eed41e81004308693ac84ea95614b0920 ]
+
+Fix the issue: device doesn't accept LGO_U1/U2:
+1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2
+ by default;
+2. enable/disable controller to initiate requests for transition into
+ U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE;
+
+Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/usb/mtu3/mtu3_core.c | 4 +++-
+ drivers/usb/mtu3/mtu3_gadget_ep0.c | 8 ++++----
+ 2 files changed, 7 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
+index 947579842ad7..95978e3b363e 100644
+--- a/drivers/usb/mtu3/mtu3_core.c
++++ b/drivers/usb/mtu3/mtu3_core.c
+@@ -564,8 +564,10 @@ static void mtu3_regs_init(struct mtu3 *mtu)
+ if (mtu->is_u3_ip) {
+ /* disable LGO_U1/U2 by default */
+ mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
+- SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE |
+ SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
++ /* enable accept LGO_U1/U2 link command from host */
++ mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL,
++ SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE);
+ /* device responses to u3_exit from host automatically */
+ mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
+ /* automatically build U2 link when U3 detect fail */
+diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
+index 958d74dd2b78..7997cf5f06fc 100644
+--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
++++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
+@@ -335,9 +335,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
+
+ lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
+ if (set)
+- lpc |= SW_U1_ACCEPT_ENABLE;
++ lpc |= SW_U1_REQUEST_ENABLE;
+ else
+- lpc &= ~SW_U1_ACCEPT_ENABLE;
++ lpc &= ~SW_U1_REQUEST_ENABLE;
+ mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
+
+ mtu->u1_enable = !!set;
+@@ -350,9 +350,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
+
+ lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
+ if (set)
+- lpc |= SW_U2_ACCEPT_ENABLE;
++ lpc |= SW_U2_REQUEST_ENABLE;
+ else
+- lpc &= ~SW_U2_ACCEPT_ENABLE;
++ lpc &= ~SW_U2_REQUEST_ENABLE;
+ mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
+
+ mtu->u2_enable = !!set;
+--
+2.19.1
+
--- /dev/null
+From f9c5ed985271b0573afc49ee9bf334e76fce912d Mon Sep 17 00:00:00 2001
+From: Bin Liu <b-liu@ti.com>
+Date: Tue, 18 Dec 2018 07:58:04 -0600
+Subject: usb: musb: dsps: fix otg state machine
+
+[ Upstream commit 6010abf2c2c0e382d7e8ee44bd11f343aae90cce ]
+
+Due to lack of ID pin interrupt event on AM335x devices, the musb dsps
+driver uses polling to detect usb device attach for dual-role port.
+
+But in the case if a micro-A cable adapter is attached without a USB device
+attached to the cable, the musb state machine gets stuck in a_wait_vrise
+state waiting for the MUSB_CONNECT interrupt which won't happen due to the
+usb device is not attached. The state is stuck in a_wait_vrise even after
+the micro-A cable is detached, which could cause VBUS retention if then the
+dual-role port is attached to a host port.
+
+To fix the problem, make a_wait_vrise as a transient state, then move the
+state to either a_wait_bcon for host port or a_idle state for dual-role
+port, if no usb device is attached to the port.
+
+Signed-off-by: Bin Liu <b-liu@ti.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/usb/musb/musb_dsps.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
+index dbb482b7e0ba..b7d460adaa61 100644
+--- a/drivers/usb/musb/musb_dsps.c
++++ b/drivers/usb/musb/musb_dsps.c
+@@ -242,8 +242,13 @@ static int dsps_check_status(struct musb *musb, void *unused)
+
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_WAIT_VRISE:
+- dsps_mod_timer_optional(glue);
+- break;
++ if (musb->port_mode == MUSB_HOST) {
++ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
++ dsps_mod_timer_optional(glue);
++ break;
++ }
++ /* fall through */
++
+ case OTG_STATE_A_WAIT_BCON:
+ /* keep VBUS on for host-only mode */
+ if (musb->port_mode == MUSB_PORT_MODE_HOST) {
+--
+2.19.1
+
--- /dev/null
+From 7a957c8733db86971f49f0172219dc2bb36cd8bb Mon Sep 17 00:00:00 2001
+From: Ben Dooks <ben.dooks@codethink.co.uk>
+Date: Wed, 14 Nov 2018 11:50:19 +0000
+Subject: usbnet: smsc95xx: fix rx packet alignment
+
+[ Upstream commit 810eeb1f41a9a272eedc94ca18c072e75678ede4 ]
+
+The smsc95xx driver already takes into account the NET_IP_ALIGN
+parameter when setting up the receive packet data, which means
+we do not need to worry about aligning the packets in the usbnet
+driver.
+
+Adding the EVENT_NO_IP_ALIGN means that the IPv4 header is now
+passed to the ip_rcv() routine with the start on an aligned address.
+
+Tested on Raspberry Pi B3.
+
+Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/net/usb/smsc95xx.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
+index 2f65975a121f..fc48da1c702d 100644
+--- a/drivers/net/usb/smsc95xx.c
++++ b/drivers/net/usb/smsc95xx.c
+@@ -1295,6 +1295,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
+ dev->net->features |= NETIF_F_RXCSUM;
+
+ dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
++ set_bit(EVENT_NO_IP_ALIGN, &dev->flags);
+
+ smsc95xx_init_mac_address(dev);
+
+--
+2.19.1
+
--- /dev/null
+From 17355a855011e70cdda40188eb26f3022d89f5e0 Mon Sep 17 00:00:00 2001
+From: Alexey Khoroshilov <khoroshilov@ispras.ru>
+Date: Thu, 20 Dec 2018 19:13:07 +0100
+Subject: video: clps711x-fb: release disp device node in probe()
+
+[ Upstream commit fdac751355cd76e049f628afe6acb8ff4b1399f7 ]
+
+clps711x_fb_probe() increments refcnt of disp device node by
+of_parse_phandle() and leaves it undecremented on both
+successful and error paths.
+
+Found by Linux Driver Verification project (linuxtesting.org).
+
+Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
+Cc: Alexander Shiyan <shc_work@mail.ru>
+Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/video/fbdev/clps711x-fb.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/video/fbdev/clps711x-fb.c b/drivers/video/fbdev/clps711x-fb.c
+index ff561073ee4e..42f909618f04 100644
+--- a/drivers/video/fbdev/clps711x-fb.c
++++ b/drivers/video/fbdev/clps711x-fb.c
+@@ -287,14 +287,17 @@ static int clps711x_fb_probe(struct platform_device *pdev)
+ }
+
+ ret = of_get_fb_videomode(disp, &cfb->mode, OF_USE_NATIVE_MODE);
+- if (ret)
++ if (ret) {
++ of_node_put(disp);
+ goto out_fb_release;
++ }
+
+ of_property_read_u32(disp, "ac-prescale", &cfb->ac_prescale);
+ cfb->cmap_invert = of_property_read_bool(disp, "cmap-invert");
+
+ ret = of_property_read_u32(disp, "bits-per-pixel",
+ &info->var.bits_per_pixel);
++ of_node_put(disp);
+ if (ret)
+ goto out_fb_release;
+
+--
+2.19.1
+
--- /dev/null
+From f512cc4573621012c715aa330ae4c31a6431dc36 Mon Sep 17 00:00:00 2001
+From: Wolfram Sang <wsa+renesas@sang-engineering.com>
+Date: Wed, 7 Nov 2018 20:46:02 +0100
+Subject: watchdog: renesas_wdt: don't set divider while watchdog is running
+
+[ Upstream commit e990e12741877e9bfac402ca468f4007a75f6e2a ]
+
+The datasheet says we must stop the timer before changing the clock
+divider. This can happen when the restart handler is called while the
+watchdog is running.
+
+Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
+Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
+Reviewed-by: Guenter Roeck <linux@roeck-us.net>
+Signed-off-by: Guenter Roeck <linux@roeck-us.net>
+Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ drivers/watchdog/renesas_wdt.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/watchdog/renesas_wdt.c b/drivers/watchdog/renesas_wdt.c
+index 831ef83f6de1..c4a17d72d025 100644
+--- a/drivers/watchdog/renesas_wdt.c
++++ b/drivers/watchdog/renesas_wdt.c
+@@ -74,12 +74,17 @@ static int rwdt_init_timeout(struct watchdog_device *wdev)
+ static int rwdt_start(struct watchdog_device *wdev)
+ {
+ struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
++ u8 val;
+
+ pm_runtime_get_sync(wdev->parent);
+
+- rwdt_write(priv, 0, RWTCSRB);
+- rwdt_write(priv, priv->cks, RWTCSRA);
++ /* Stop the timer before we modify any register */
++ val = readb_relaxed(priv->base + RWTCSRA) & ~RWTCSRA_TME;
++ rwdt_write(priv, val, RWTCSRA);
++
+ rwdt_init_timeout(wdev);
++ rwdt_write(priv, priv->cks, RWTCSRA);
++ rwdt_write(priv, 0, RWTCSRB);
+
+ while (readb_relaxed(priv->base + RWTCSRA) & RWTCSRA_WRFLG)
+ cpu_relax();
+--
+2.19.1
+
--- /dev/null
+From 7fb467eea89a962d3f822b9bdc2201cca2b4bb88 Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+Date: Wed, 28 Nov 2018 23:20:11 +0100
+Subject: x86/fpu: Add might_fault() to user_insn()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+[ Upstream commit 6637401c35b2f327a35d27f44bda05e327f2f017 ]
+
+Every user of user_insn() passes an user memory pointer to this macro.
+
+Add might_fault() to user_insn() so we can spot users which are using
+this macro in sections where page faulting is not allowed.
+
+ [ bp: Space it out to make it more visible. ]
+
+Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+Signed-off-by: Borislav Petkov <bp@suse.de>
+Reviewed-by: Rik van Riel <riel@surriel.com>
+Cc: "H. Peter Anvin" <hpa@zytor.com>
+Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
+Cc: Andy Lutomirski <luto@kernel.org>
+Cc: Dave Hansen <dave.hansen@linux.intel.com>
+Cc: Ingo Molnar <mingo@redhat.com>
+Cc: Jann Horn <jannh@google.com>
+Cc: Paolo Bonzini <pbonzini@redhat.com>
+Cc: Radim Krčmář <rkrcmar@redhat.com>
+Cc: Thomas Gleixner <tglx@linutronix.de>
+Cc: kvm ML <kvm@vger.kernel.org>
+Cc: x86-ml <x86@kernel.org>
+Link: https://lkml.kernel.org/r/20181128222035.2996-6-bigeasy@linutronix.de
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/x86/include/asm/fpu/internal.h | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
+index 69dcdf195b61..fa2c93cb42a2 100644
+--- a/arch/x86/include/asm/fpu/internal.h
++++ b/arch/x86/include/asm/fpu/internal.h
+@@ -106,6 +106,9 @@ extern void fpstate_sanitize_xstate(struct fpu *fpu);
+ #define user_insn(insn, output, input...) \
+ ({ \
+ int err; \
++ \
++ might_fault(); \
++ \
+ asm volatile(ASM_STAC "\n" \
+ "1:" #insn "\n\t" \
+ "2: " ASM_CLAC "\n" \
+--
+2.19.1
+
--- /dev/null
+From beff4c8e85ee5550f1dc4e711eefa8fb669eecb9 Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.king@canonical.com>
+Date: Thu, 25 Oct 2018 14:52:31 +0100
+Subject: x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux)
+
+[ Upstream commit 53bb565fc5439f2c8c57a786feea5946804aa3e9 ]
+
+In the expression "word1 << 16", word1 starts as u16, but is promoted to a
+signed int, then sign-extended to resource_size_t, which is probably not
+what was intended. Cast to resource_size_t to avoid the sign extension.
+
+This fixes an identical issue as fixed by commit 0b2d70764bb3 ("x86/PCI:
+Fix Broadcom CNB20LE unintended sign extension") back in 2014.
+
+Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension")
+
+Fixes: 3f6ea84a3035 ("PCI: read memory ranges out of Broadcom CNB20LE host bridge")
+Signed-off-by: Colin Ian King <colin.king@canonical.com>
+Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ arch/x86/pci/broadcom_bus.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c
+index 526536c81ddc..ca1e8e6dccc8 100644
+--- a/arch/x86/pci/broadcom_bus.c
++++ b/arch/x86/pci/broadcom_bus.c
+@@ -50,8 +50,8 @@ static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
+ word1 = read_pci_config_16(bus, slot, func, 0xc0);
+ word2 = read_pci_config_16(bus, slot, func, 0xc2);
+ if (word1 != word2) {
+- res.start = (word1 << 16) | 0x0000;
+- res.end = (word2 << 16) | 0xffff;
++ res.start = ((resource_size_t) word1 << 16) | 0x0000;
++ res.end = ((resource_size_t) word2 << 16) | 0xffff;
+ res.flags = IORESOURCE_MEM;
+ update_res(info, res.start, res.end, res.flags, 0);
+ }
+--
+2.19.1
+
--- /dev/null
+From 3ed84bf025fb60d82306d68259e42badd77b2b3c Mon Sep 17 00:00:00 2001
+From: YueHaibing <yuehaibing@huawei.com>
+Date: Wed, 19 Dec 2018 14:45:09 +0800
+Subject: xfrm6_tunnel: Fix spi check in __xfrm6_tunnel_alloc_spi
+
+[ Upstream commit fa89a4593b927b3f59c3b69379f31d3b22272e4e ]
+
+gcc warn this:
+
+net/ipv6/xfrm6_tunnel.c:143 __xfrm6_tunnel_alloc_spi() warn:
+ always true condition '(spi <= 4294967295) => (0-u32max <= u32max)'
+
+'spi' is u32, which always not greater than XFRM6_TUNNEL_SPI_MAX
+because of wrap around. So the second forloop will never reach.
+
+Signed-off-by: YueHaibing <yuehaibing@huawei.com>
+Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
+Signed-off-by: Sasha Levin <sashal@kernel.org>
+---
+ net/ipv6/xfrm6_tunnel.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
+index 4e438bc7ee87..c28e3eaad7c2 100644
+--- a/net/ipv6/xfrm6_tunnel.c
++++ b/net/ipv6/xfrm6_tunnel.c
+@@ -144,6 +144,9 @@ static u32 __xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr)
+ index = __xfrm6_tunnel_spi_check(net, spi);
+ if (index >= 0)
+ goto alloc_spi;
++
++ if (spi == XFRM6_TUNNEL_SPI_MAX)
++ break;
+ }
+ for (spi = XFRM6_TUNNEL_SPI_MIN; spi < xfrm6_tn->spi; spi++) {
+ index = __xfrm6_tunnel_spi_check(net, spi);
+--
+2.19.1
+
projects / thirdparty / kernel / stable-queue.git / commitdiff
