--- /dev/null
+From 3b4309546b48fc167aa615a2d881a09c0a97971f Mon Sep 17 00:00:00 2001
+From: Kuan-Wei Chiu <visitorckw@gmail.com>
+Date: Wed, 29 Jan 2025 00:54:15 +0800
+Subject: ALSA: hda: Fix headset detection failure due to unstable sort
+
+From: Kuan-Wei Chiu <visitorckw@gmail.com>
+
+commit 3b4309546b48fc167aa615a2d881a09c0a97971f upstream.
+
+The auto_parser assumed sort() was stable, but the kernel's sort() uses
+heapsort, which has never been stable. After commit 0e02ca29a563
+("lib/sort: optimize heapsort with double-pop variation"), the order of
+equal elements changed, causing the headset to fail to work.
+
+Fix the issue by recording the original order of elements before
+sorting and using it as a tiebreaker for equal elements in the
+comparison function.
+
+Fixes: b9030a005d58 ("ALSA: hda - Use standard sort function in hda_auto_parser.c")
+Reported-by: Austrum <austrum.lab@gmail.com>
+Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219158
+Tested-by: Austrum <austrum.lab@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
+Link: https://patch.msgid.link/20250128165415.643223-1-visitorckw@gmail.com
+Signed-off-by: Takashi Iwai <tiwai@suse.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ sound/pci/hda/hda_auto_parser.c | 8 +++++++-
+ sound/pci/hda/hda_auto_parser.h | 1 +
+ 2 files changed, 8 insertions(+), 1 deletion(-)
+
+--- a/sound/pci/hda/hda_auto_parser.c
++++ b/sound/pci/hda/hda_auto_parser.c
+@@ -80,7 +80,11 @@ static int compare_input_type(const void
+
+ /* In case one has boost and the other one has not,
+ pick the one with boost first. */
+- return (int)(b->has_boost_on_pin - a->has_boost_on_pin);
++ if (a->has_boost_on_pin != b->has_boost_on_pin)
++ return (int)(b->has_boost_on_pin - a->has_boost_on_pin);
++
++ /* Keep the original order */
++ return a->order - b->order;
+ }
+
+ /* Reorder the surround channels
+@@ -404,6 +408,8 @@ int snd_hda_parse_pin_defcfg(struct hda_
+ reorder_outputs(cfg->speaker_outs, cfg->speaker_pins);
+
+ /* sort inputs in the order of AUTO_PIN_* type */
++ for (i = 0; i < cfg->num_inputs; i++)
++ cfg->inputs[i].order = i;
+ sort(cfg->inputs, cfg->num_inputs, sizeof(cfg->inputs[0]),
+ compare_input_type, NULL);
+
+--- a/sound/pci/hda/hda_auto_parser.h
++++ b/sound/pci/hda/hda_auto_parser.h
+@@ -35,6 +35,7 @@ struct auto_pin_cfg_item {
+ unsigned int is_headset_mic:1;
+ unsigned int is_headphone_mic:1; /* Mic-only in headphone jack */
+ unsigned int has_boost_on_pin:1;
++ int order;
+ };
+
+ struct auto_pin_cfg;
--- /dev/null
+From 1aec3ed2e3e1512aba15e7e790196a44efd5f0a7 Mon Sep 17 00:00:00 2001
+From: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
+Date: Tue, 14 Jan 2025 14:06:19 -0300
+Subject: ALSA: hda/realtek: Enable headset mic on Positivo C6400
+
+From: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
+
+commit 1aec3ed2e3e1512aba15e7e790196a44efd5f0a7 upstream.
+
+Positivo C6400 is equipped with ALC269VB, and it needs
+ALC269VB_FIXUP_ASUS_ZENBOOK quirk to make its headset mic work.
+Also must to limits the microphone boost.
+
+Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
+Cc: <stable@vger.kernel.org>
+Link: https://patch.msgid.link/20250114170619.11510-1-edson.drosdeck@gmail.com
+Signed-off-by: Takashi Iwai <tiwai@suse.de>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ sound/pci/hda/patch_realtek.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/sound/pci/hda/patch_realtek.c
++++ b/sound/pci/hda/patch_realtek.c
+@@ -9435,6 +9435,7 @@ static const struct snd_pci_quirk alc269
+ SND_PCI_QUIRK(0x17aa, 0x511f, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD),
+ SND_PCI_QUIRK(0x17aa, 0x9e56, "Lenovo ZhaoYang CF4620Z", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
++ SND_PCI_QUIRK(0x1849, 0x0269, "Positivo Master C6400", ALC269VB_FIXUP_ASUS_ZENBOOK),
+ SND_PCI_QUIRK(0x1849, 0x1233, "ASRock NUC Box 1100", ALC233_FIXUP_NO_AUDIO_JACK),
+ SND_PCI_QUIRK(0x1849, 0xa233, "Positivo Master C6300", ALC269_FIXUP_HEADSET_MIC),
+ SND_PCI_QUIRK(0x19e5, 0x3204, "Huawei MACH-WX9", ALC256_FIXUP_HUAWEI_MACH_WX9_PINS),
--- /dev/null
+From d1248436cbef1f924c04255367ff4845ccd9025e Mon Sep 17 00:00:00 2001
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+Date: Sun, 5 Jan 2025 16:34:03 +0800
+Subject: blk-cgroup: Fix class @block_class's subsystem refcount leakage
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+
+commit d1248436cbef1f924c04255367ff4845ccd9025e upstream.
+
+blkcg_fill_root_iostats() iterates over @block_class's devices by
+class_dev_iter_(init|next)(), but does not end iterating with
+class_dev_iter_exit(), so causes the class's subsystem refcount leakage.
+
+Fix by ending the iterating with class_dev_iter_exit().
+
+Fixes: ef45fe470e1e ("blk-cgroup: show global disk stats in root cgroup io.stat")
+Reviewed-by: Michal Koutný <mkoutny@suse.com>
+Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Cc: stable@vger.kernel.org
+Acked-by: Tejun Heo <tj@kernel.org>
+Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
+Link: https://lore.kernel.org/r/20250105-class_fix-v6-2-3a2f1768d4d4@quicinc.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ block/blk-cgroup.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/block/blk-cgroup.c
++++ b/block/blk-cgroup.c
+@@ -851,6 +851,7 @@ static void blkcg_fill_root_iostats(void
+ }
+ disk_put_part(part);
+ }
++ class_dev_iter_exit(&iter);
+ }
+
+ static int blkcg_print_stat(struct seq_file *sf, void *v)
--- /dev/null
+From 9fdbbdbbc92b1474a87b89f8b964892a63734492 Mon Sep 17 00:00:00 2001
+From: Hou Tao <houtao1@huawei.com>
+Date: Mon, 20 Jan 2025 16:29:49 +0800
+Subject: dm-crypt: don't update io->sector after kcryptd_crypt_write_io_submit()
+
+From: Hou Tao <houtao1@huawei.com>
+
+commit 9fdbbdbbc92b1474a87b89f8b964892a63734492 upstream.
+
+The updates of io->sector are the leftovers when dm-crypt allocated
+pages for partial write request. However, since commit cf2f1abfbd0db
+("dm crypt: don't allocate pages for a partial request"), there is no
+partial request anymore.
+
+After the introduction of write request rb-tree, the updates of
+io->sectors may interfere the insertion procedure, because ->sectors of
+these write requests which have already been added in the rb-tree may be
+changed during the insertion of new write request.
+
+Fix it by removing these buggy updates of io->sectors. Considering these
+updates only effect the write request rb-tree, the commit which
+introduces the write request rb-tree is used as the fix tag.
+
+Fixes: b3c5fd305249 ("dm crypt: sort writes")
+Cc: stable@vger.kernel.org
+Signed-off-by: Hou Tao <houtao1@huawei.com>
+Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/md/dm-crypt.c | 14 +++-----------
+ 1 file changed, 3 insertions(+), 11 deletions(-)
+
+--- a/drivers/md/dm-crypt.c
++++ b/drivers/md/dm-crypt.c
+@@ -2015,7 +2015,6 @@ static void kcryptd_crypt_write_continue
+ struct crypt_config *cc = io->cc;
+ struct convert_context *ctx = &io->ctx;
+ int crypt_finished;
+- sector_t sector = io->sector;
+ blk_status_t r;
+
+ wait_for_completion(&ctx->restart);
+@@ -2032,10 +2031,8 @@ static void kcryptd_crypt_write_continue
+ }
+
+ /* Encryption was already finished, submit io now */
+- if (crypt_finished) {
++ if (crypt_finished)
+ kcryptd_crypt_write_io_submit(io, 0);
+- io->sector = sector;
+- }
+
+ crypt_dec_pending(io);
+ }
+@@ -2046,14 +2043,13 @@ static void kcryptd_crypt_write_convert(
+ struct convert_context *ctx = &io->ctx;
+ struct bio *clone;
+ int crypt_finished;
+- sector_t sector = io->sector;
+ blk_status_t r;
+
+ /*
+ * Prevent io from disappearing until this function completes.
+ */
+ crypt_inc_pending(io);
+- crypt_convert_init(cc, ctx, NULL, io->base_bio, sector);
++ crypt_convert_init(cc, ctx, NULL, io->base_bio, io->sector);
+
+ clone = crypt_alloc_buffer(io, io->base_bio->bi_iter.bi_size);
+ if (unlikely(!clone)) {
+@@ -2070,8 +2066,6 @@ static void kcryptd_crypt_write_convert(
+ io->ctx.iter_in = clone->bi_iter;
+ }
+
+- sector += bio_sectors(clone);
+-
+ crypt_inc_pending(io);
+ r = crypt_convert(cc, ctx,
+ test_bit(DM_CRYPT_NO_WRITE_WORKQUEUE, &cc->flags), true);
+@@ -2095,10 +2089,8 @@ static void kcryptd_crypt_write_convert(
+ }
+
+ /* Encryption was already finished, submit io now */
+- if (crypt_finished) {
++ if (crypt_finished)
+ kcryptd_crypt_write_io_submit(io, 0);
+- io->sector = sector;
+- }
+
+ dec:
+ crypt_dec_pending(io);
--- /dev/null
+From 8b8f8037765757861f899ed3a2bfb34525b5c065 Mon Sep 17 00:00:00 2001
+From: Hou Tao <houtao1@huawei.com>
+Date: Mon, 20 Jan 2025 16:29:51 +0800
+Subject: dm-crypt: track tag_offset in convert_context
+
+From: Hou Tao <houtao1@huawei.com>
+
+commit 8b8f8037765757861f899ed3a2bfb34525b5c065 upstream.
+
+dm-crypt uses tag_offset to index the integrity metadata for each crypt
+sector. When the initial crypt_convert() returns BLK_STS_DEV_RESOURCE,
+dm-crypt will try to continue the crypt/decrypt procedure in a kworker.
+However, it resets tag_offset as zero instead of using the tag_offset
+related with current sector. It may return unexpected data when using
+random IV or return unexpected integrity related error.
+
+Fix the problem by tracking tag_offset in per-IO convert_context.
+Therefore, when the crypt/decrypt procedure continues in a kworker, it
+could use the next tag_offset saved in convert_context.
+
+Fixes: 8abec36d1274 ("dm crypt: do not wait for backlogged crypto request completion in softirq")
+Cc: stable@vger.kernel.org
+Signed-off-by: Hou Tao <houtao1@huawei.com>
+Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/md/dm-crypt.c | 13 +++++++------
+ 1 file changed, 7 insertions(+), 6 deletions(-)
+
+--- a/drivers/md/dm-crypt.c
++++ b/drivers/md/dm-crypt.c
+@@ -52,6 +52,7 @@ struct convert_context {
+ struct bio *bio_out;
+ struct bvec_iter iter_out;
+ atomic_t cc_pending;
++ unsigned int tag_offset;
+ u64 cc_sector;
+ union {
+ struct skcipher_request *req;
+@@ -1218,6 +1219,7 @@ static void crypt_convert_init(struct cr
+ if (bio_out)
+ ctx->iter_out = bio_out->bi_iter;
+ ctx->cc_sector = sector + cc->iv_offset;
++ ctx->tag_offset = 0;
+ init_completion(&ctx->restart);
+ }
+
+@@ -1543,7 +1545,6 @@ static void crypt_free_req(struct crypt_
+ static blk_status_t crypt_convert(struct crypt_config *cc,
+ struct convert_context *ctx, bool atomic, bool reset_pending)
+ {
+- unsigned int tag_offset = 0;
+ unsigned int sector_step = cc->sector_size >> SECTOR_SHIFT;
+ int r;
+
+@@ -1566,9 +1567,9 @@ static blk_status_t crypt_convert(struct
+ atomic_inc(&ctx->cc_pending);
+
+ if (crypt_integrity_aead(cc))
+- r = crypt_convert_block_aead(cc, ctx, ctx->r.req_aead, tag_offset);
++ r = crypt_convert_block_aead(cc, ctx, ctx->r.req_aead, ctx->tag_offset);
+ else
+- r = crypt_convert_block_skcipher(cc, ctx, ctx->r.req, tag_offset);
++ r = crypt_convert_block_skcipher(cc, ctx, ctx->r.req, ctx->tag_offset);
+
+ switch (r) {
+ /*
+@@ -1588,8 +1589,8 @@ static blk_status_t crypt_convert(struct
+ * exit and continue processing in a workqueue
+ */
+ ctx->r.req = NULL;
++ ctx->tag_offset++;
+ ctx->cc_sector += sector_step;
+- tag_offset++;
+ return BLK_STS_DEV_RESOURCE;
+ }
+ } else {
+@@ -1603,8 +1604,8 @@ static blk_status_t crypt_convert(struct
+ */
+ case -EINPROGRESS:
+ ctx->r.req = NULL;
++ ctx->tag_offset++;
+ ctx->cc_sector += sector_step;
+- tag_offset++;
+ continue;
+ /*
+ * The request was already processed (synchronously).
+@@ -1612,7 +1613,7 @@ static blk_status_t crypt_convert(struct
+ case 0:
+ atomic_dec(&ctx->cc_pending);
+ ctx->cc_sector += sector_step;
+- tag_offset++;
++ ctx->tag_offset++;
+ if (!atomic)
+ cond_resched();
+ continue;
--- /dev/null
+From 8ba14d9f490aef9fd535c04e9e62e1169eb7a055 Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <nathan@kernel.org>
+Date: Tue, 21 Jan 2025 18:11:34 -0700
+Subject: efi: libstub: Use '-std=gnu11' to fix build with GCC 15
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Nathan Chancellor <nathan@kernel.org>
+
+commit 8ba14d9f490aef9fd535c04e9e62e1169eb7a055 upstream.
+
+GCC 15 changed the default C standard version to C23, which should not
+have impacted the kernel because it requests the gnu11 standard via
+'-std=' in the main Makefile. However, the EFI libstub Makefile uses its
+own set of KBUILD_CFLAGS for x86 without a '-std=' value (i.e., using
+the default), resulting in errors from the kernel's definitions of bool,
+true, and false in stddef.h, which are reserved keywords under C23.
+
+ ./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
+ 11 | false = 0,
+ ./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
+ 35 | typedef _Bool bool;
+
+Set '-std=gnu11' in the x86 cflags to resolve the error and consistently
+use the same C standard version for the entire kernel. All other
+architectures reuse KBUILD_CFLAGS from the rest of the kernel, so this
+issue is not visible for them.
+
+Cc: stable@vger.kernel.org
+Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
+Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
+Reported-by: Jakub Jelinek <jakub@redhat.com>
+Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
+Signed-off-by: Nathan Chancellor <nathan@kernel.org>
+Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/firmware/efi/libstub/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/firmware/efi/libstub/Makefile
++++ b/drivers/firmware/efi/libstub/Makefile
+@@ -7,7 +7,7 @@
+ #
+ cflags-$(CONFIG_X86_32) := -march=i386
+ cflags-$(CONFIG_X86_64) := -mcmodel=small
+-cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ \
++cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ -std=gnu11 \
+ -fPIC -fno-strict-aliasing -mno-red-zone \
+ -mno-mmx -mno-sse -fshort-wchar \
+ -Wno-pointer-sign \
--- /dev/null
+From 8a5b38c3fd709e8acd2bfdedf66c25e6af759576 Mon Sep 17 00:00:00 2001
+From: Heiko Stuebner <heiko@sntech.de>
+Date: Thu, 7 Nov 2024 12:47:04 +0100
+Subject: HID: hid-sensor-hub: don't use stale platform-data on remove
+
+From: Heiko Stuebner <heiko@sntech.de>
+
+commit 8a5b38c3fd709e8acd2bfdedf66c25e6af759576 upstream.
+
+The hid-sensor-hub creates the individual device structs and transfers them
+to the created mfd platform-devices via the platform_data in the mfd_cell.
+
+Before e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads")
+the sensor-hub was managing access centrally, with one "completion" in the
+hub's data structure, which needed to be finished on removal at the latest.
+
+The mentioned commit then moved this central management to each hid sensor
+device, resulting on a completion in each struct hid_sensor_hub_device.
+The remove procedure was adapted to go through all sensor devices and
+finish any pending "completion".
+
+What this didn't take into account was, platform_device_add_data() that is
+used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
+platform-data. So the data the platform-device gets is a copy of the
+original data, meaning that the device worked on a different completion
+than what sensor_hub_remove() currently wants to access.
+
+To fix that, use device_for_each_child() to go through each child-device
+similar to how mfd_remove_devices() unregisters the devices later and
+with that get the live platform_data to finalize the correct completion.
+
+Fixes: e651a1da442a ("HID: hid-sensor-hub: Allow parallel synchronous reads")
+Cc: stable@vger.kernel.org
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+Acked-by: Benjamin Tissoires <bentiss@kernel.org>
+Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+Acked-by: Jiri Kosina <jkosina@suse.com>
+Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
+Signed-off-by: Lee Jones <lee@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/hid/hid-sensor-hub.c | 21 ++++++++++++++-------
+ 1 file changed, 14 insertions(+), 7 deletions(-)
+
+--- a/drivers/hid/hid-sensor-hub.c
++++ b/drivers/hid/hid-sensor-hub.c
+@@ -730,23 +730,30 @@ err_stop_hw:
+ return ret;
+ }
+
++static int sensor_hub_finalize_pending_fn(struct device *dev, void *data)
++{
++ struct hid_sensor_hub_device *hsdev = dev->platform_data;
++
++ if (hsdev->pending.status)
++ complete(&hsdev->pending.ready);
++
++ return 0;
++}
++
+ static void sensor_hub_remove(struct hid_device *hdev)
+ {
+ struct sensor_hub_data *data = hid_get_drvdata(hdev);
+ unsigned long flags;
+- int i;
+
+ hid_dbg(hdev, " hardware removed\n");
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
++
+ spin_lock_irqsave(&data->lock, flags);
+- for (i = 0; i < data->hid_sensor_client_cnt; ++i) {
+- struct hid_sensor_hub_device *hsdev =
+- data->hid_sensor_hub_client_devs[i].platform_data;
+- if (hsdev->pending.status)
+- complete(&hsdev->pending.ready);
+- }
++ device_for_each_child(&hdev->dev, NULL,
++ sensor_hub_finalize_pending_fn);
+ spin_unlock_irqrestore(&data->lock, flags);
++
+ mfd_remove_devices(&hdev->dev);
+ mutex_destroy(&data->mutex);
+ }
--- /dev/null
+From 8f6629c004b193d23612641c3607e785819e97ab Mon Sep 17 00:00:00 2001
+From: Nathan Chancellor <nathan@kernel.org>
+Date: Thu, 17 Oct 2024 10:09:22 -0700
+Subject: kbuild: Move -Wenum-enum-conversion to W=2
+
+From: Nathan Chancellor <nathan@kernel.org>
+
+commit 8f6629c004b193d23612641c3607e785819e97ab upstream.
+
+-Wenum-enum-conversion was strengthened in clang-19 to warn for C, which
+caused the kernel to move it to W=1 in commit 75b5ab134bb5 ("kbuild:
+Move -Wenum-{compare-conditional,enum-conversion} into W=1") because
+there were numerous instances that would break builds with -Werror.
+Unfortunately, this is not a full solution, as more and more developers,
+subsystems, and distributors are building with W=1 as well, so they
+continue to see the numerous instances of this warning.
+
+Since the move to W=1, there have not been many new instances that have
+appeared through various build reports and the ones that have appeared
+seem to be following similar existing patterns, suggesting that most
+instances of this warning will not be real issues. The only alternatives
+for silencing this warning are adding casts (which is generally seen as
+an ugly practice) or refactoring the enums to macro defines or a unified
+enum (which may be undesirable because of type safety in other parts of
+the code).
+
+Move the warning to W=2, where warnings that occur frequently but may be
+relevant should reside.
+
+Cc: stable@vger.kernel.org
+Fixes: 75b5ab134bb5 ("kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1")
+Link: https://lore.kernel.org/ZwRA9SOcOjjLJcpi@google.com/
+Signed-off-by: Nathan Chancellor <nathan@kernel.org>
+Acked-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ scripts/Makefile.extrawarn | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/scripts/Makefile.extrawarn
++++ b/scripts/Makefile.extrawarn
+@@ -37,6 +37,10 @@ KBUILD_CFLAGS += -Wno-missing-field-init
+ KBUILD_CFLAGS += -Wno-sign-compare
+ KBUILD_CFLAGS += -Wno-type-limits
+
++ifdef CONFIG_CC_IS_CLANG
++KBUILD_CFLAGS += -Wno-enum-enum-conversion
++endif
++
+ KBUILD_CPPFLAGS += -DKBUILD_EXTRA_WARN1
+
+ else
+@@ -54,7 +58,6 @@ KBUILD_CFLAGS += -Wno-tautological-const
+ KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access)
+ KBUILD_CFLAGS += $(call cc-disable-warning, cast-function-type-strict)
+ KBUILD_CFLAGS += -Wno-enum-compare-conditional
+-KBUILD_CFLAGS += -Wno-enum-enum-conversion
+ endif
+
+ endif
--- /dev/null
+From e4c00c9b1f70cd11792ff5b825899a6ee0234a62 Mon Sep 17 00:00:00 2001
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+Date: Thu, 9 Jan 2025 21:26:52 +0800
+Subject: of: Correct child specifier used as input of the 2nd nexus node
+
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+
+commit e4c00c9b1f70cd11792ff5b825899a6ee0234a62 upstream.
+
+API of_parse_phandle_with_args_map() will use wrong input for nexus node
+Nexus_2 as shown below:
+
+ Node_1 Nexus_1 Nexus_2
+&Nexus_1,arg_1 -> arg_1,&Nexus_2,arg_2' -> &Nexus_2,arg_2 -> arg_2,...
+ map-pass-thru=<...>
+
+Nexus_1's output arg_2 should be used as input of Nexus_2, but the API
+wrongly uses arg_2' instead which != arg_2 due to Nexus_1's map-pass-thru.
+
+Fix by always making @match_array point to @initial_match_array into
+which to store nexus output.
+
+Fixes: bd6f2fd5a1d5 ("of: Support parsing phandle argument lists through a nexus node")
+Cc: stable@vger.kernel.org
+Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
+Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-1-db8a72415b8c@quicinc.com
+Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/of/base.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/of/base.c
++++ b/drivers/of/base.c
+@@ -1659,7 +1659,6 @@ int of_parse_phandle_with_args_map(const
+ * specifier into the out_args structure, keeping the
+ * bits specified in <list>-map-pass-thru.
+ */
+- match_array = map - new_size;
+ for (i = 0; i < new_size; i++) {
+ __be32 val = *(map - new_size + i);
+
+@@ -1668,6 +1667,7 @@ int of_parse_phandle_with_args_map(const
+ val |= cpu_to_be32(out_args->args[i]) & pass[i];
+ }
+
++ initial_match_array[i] = val;
+ out_args->args[i] = be32_to_cpu(val);
+ }
+ out_args->args_count = list_size = new_size;
--- /dev/null
+From b9e58c934c56aa35b0fb436d9afd86ef326bae0e Mon Sep 17 00:00:00 2001
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+Date: Mon, 16 Dec 2024 08:40:40 +0800
+Subject: of: Fix of_find_node_opts_by_path() handling of alias+path+options
+
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+
+commit b9e58c934c56aa35b0fb436d9afd86ef326bae0e upstream.
+
+of_find_node_opts_by_path() fails to find OF device node when its
+@path parameter have pattern below:
+
+"alias-name/node-name-1/.../node-name-N:options".
+
+The reason is that alias name length calculated by the API is wrong, as
+explained by example below:
+
+"testcase-alias/phandle-tests/consumer-a:testaliasoption".
+ ^ ^ ^
+ 0 14 39
+
+The right length of alias 'testcase-alias' is 14, but the result worked
+out by the API is 39 which is obvious wrong.
+
+Fix by using index of either '/' or ':' as the length who comes earlier.
+
+Fixes: 75c28c09af99 ("of: add optional options parameter to of_find_node_by_path()")
+Cc: stable@vger.kernel.org
+Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
+Link: https://lore.kernel.org/r/20241216-of_core_fix-v2-1-e69b8f60da63@quicinc.com
+Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/of/base.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/drivers/of/base.c
++++ b/drivers/of/base.c
+@@ -926,10 +926,10 @@ struct device_node *of_find_node_opts_by
+ /* The path could begin with an alias */
+ if (*path != '/') {
+ int len;
+- const char *p = separator;
++ const char *p = strchrnul(path, '/');
+
+- if (!p)
+- p = strchrnul(path, '/');
++ if (separator && separator < p)
++ p = separator;
+ len = p - path;
+
+ /* of_aliases must not be NULL */
--- /dev/null
+From 267b21d0bef8e67dbe6c591c9991444e58237ec9 Mon Sep 17 00:00:00 2001
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+Date: Thu, 9 Jan 2025 21:27:00 +0800
+Subject: of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+From: Zijun Hu <quic_zijuhu@quicinc.com>
+
+commit 267b21d0bef8e67dbe6c591c9991444e58237ec9 upstream.
+
+According to DT spec, size of property 'alignment' is based on parent
+node’s #size-cells property.
+
+But __reserved_mem_alloc_size() wrongly uses @dt_root_addr_cells to get
+the property obviously.
+
+Fix by using @dt_root_size_cells instead of @dt_root_addr_cells.
+
+Fixes: 3f0c82066448 ("drivers: of: add initialization code for dynamic reserved memory")
+Cc: stable@vger.kernel.org
+Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
+Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-9-db8a72415b8c@quicinc.com
+Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/of/of_reserved_mem.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/of/of_reserved_mem.c
++++ b/drivers/of/of_reserved_mem.c
+@@ -94,12 +94,12 @@ static int __init __reserved_mem_alloc_s
+
+ prop = of_get_flat_dt_prop(node, "alignment", &len);
+ if (prop) {
+- if (len != dt_root_addr_cells * sizeof(__be32)) {
++ if (len != dt_root_size_cells * sizeof(__be32)) {
+ pr_err("invalid alignment property in '%s' node.\n",
+ uname);
+ return -EINVAL;
+ }
+- align = dt_mem_next_cell(dt_root_addr_cells, &prop);
++ align = dt_mem_next_cell(dt_root_size_cells, &prop);
+ }
+
+ nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
--- /dev/null
+From 62892e77b8a64b9dc0e1da75980aa145347b6820 Mon Sep 17 00:00:00 2001
+From: Kuan-Wei Chiu <visitorckw@gmail.com>
+Date: Thu, 16 Jan 2025 19:08:42 +0800
+Subject: perf bench: Fix undefined behavior in cmpworker()
+
+From: Kuan-Wei Chiu <visitorckw@gmail.com>
+
+commit 62892e77b8a64b9dc0e1da75980aa145347b6820 upstream.
+
+The comparison function cmpworker() violates the C standard's
+requirements for qsort() comparison functions, which mandate symmetry
+and transitivity:
+
+Symmetry: If x < y, then y > x.
+Transitivity: If x < y and y < z, then x < z.
+
+In its current implementation, cmpworker() incorrectly returns 0 when
+w1->tid < w2->tid, which breaks both symmetry and transitivity. This
+violation causes undefined behavior, potentially leading to issues such
+as memory corruption in glibc [1].
+
+Fix the issue by returning -1 when w1->tid < w2->tid, ensuring
+compliance with the C standard and preventing undefined behavior.
+
+Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
+Fixes: 121dd9ea0116 ("perf bench: Add epoll parallel epoll_wait benchmark")
+Cc: stable@vger.kernel.org
+Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
+Reviewed-by: James Clark <james.clark@linaro.org>
+Link: https://lore.kernel.org/r/20250116110842.4087530-1-visitorckw@gmail.com
+Signed-off-by: Namhyung Kim <namhyung@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ tools/perf/bench/epoll-wait.c | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/tools/perf/bench/epoll-wait.c
++++ b/tools/perf/bench/epoll-wait.c
+@@ -407,7 +407,12 @@ static int cmpworker(const void *p1, con
+
+ struct worker *w1 = (struct worker *) p1;
+ struct worker *w2 = (struct worker *) p2;
+- return w1->tid > w2->tid;
++
++ if (w1->tid > w2->tid)
++ return 1;
++ if (w1->tid < w2->tid)
++ return -1;
++ return 0;
+ }
+
+ int bench_epoll_wait(int argc, const char **argv)
--- /dev/null
+From 11b93559000c686ad7e5ab0547e76f21cc143844 Mon Sep 17 00:00:00 2001
+From: Narayana Murty N <nnmlinux@linux.ibm.com>
+Date: Thu, 16 Jan 2025 04:39:54 -0600
+Subject: powerpc/pseries/eeh: Fix get PE state translation
+
+From: Narayana Murty N <nnmlinux@linux.ibm.com>
+
+commit 11b93559000c686ad7e5ab0547e76f21cc143844 upstream.
+
+The PE Reset State "0" returned by RTAS calls
+"ibm_read_slot_reset_[state|state2]" indicates that the reset is
+deactivated and the PE is in a state where MMIO and DMA are allowed.
+However, the current implementation of "pseries_eeh_get_state()" does
+not reflect this, causing drivers to incorrectly assume that MMIO and
+DMA operations cannot be resumed.
+
+The userspace drivers as a part of EEH recovery using VFIO ioctls fail
+to detect when the recovery process is complete. The VFIO_EEH_PE_GET_STATE
+ioctl does not report the expected EEH_PE_STATE_NORMAL state, preventing
+userspace drivers from functioning properly on pseries systems.
+
+The patch addresses this issue by updating 'pseries_eeh_get_state()'
+to include "EEH_STATE_MMIO_ENABLED" and "EEH_STATE_DMA_ENABLED" in
+the result mask for PE Reset State "0". This ensures correct state
+reporting to the callers, aligning the behavior with the PAPR specification
+and fixing the bug in EEH recovery for VFIO user workflows.
+
+Fixes: 00ba05a12b3c ("powerpc/pseries: Cleanup on pseries_eeh_get_state()")
+Cc: stable@vger.kernel.org
+Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
+Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
+Link: https://lore.kernel.org/stable/20241212075044.10563-1-nnmlinux%40linux.ibm.com
+Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
+Link: https://patch.msgid.link/20250116103954.17324-1-nnmlinux@linux.ibm.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ arch/powerpc/platforms/pseries/eeh_pseries.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
++++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
+@@ -578,8 +578,10 @@ static int pseries_eeh_get_state(struct
+
+ switch(rets[0]) {
+ case 0:
+- result = EEH_STATE_MMIO_ACTIVE |
+- EEH_STATE_DMA_ACTIVE;
++ result = EEH_STATE_MMIO_ACTIVE |
++ EEH_STATE_DMA_ACTIVE |
++ EEH_STATE_MMIO_ENABLED |
++ EEH_STATE_DMA_ENABLED;
+ break;
+ case 1:
+ result = EEH_STATE_RESET_ACTIVE |
--- /dev/null
+From 841df27d619ee1f5ca6473e15227b39d6136562d Mon Sep 17 00:00:00 2001
+From: Quinn Tran <qutran@marvell.com>
+Date: Fri, 15 Nov 2024 18:33:09 +0530
+Subject: scsi: qla2xxx: Move FCE Trace buffer allocation to user control
+
+From: Quinn Tran <qutran@marvell.com>
+
+commit 841df27d619ee1f5ca6473e15227b39d6136562d upstream.
+
+Currently FCE Tracing is enabled to log additional ELS events. Instead,
+user will enable or disable this feature through debugfs.
+
+Modify existing DFS knob to allow user to enable or disable this
+feature.
+
+echo [1 | 0] > /sys/kernel/debug/qla2xxx/qla2xxx_??/fce
+cat /sys/kernel/debug/qla2xxx/qla2xxx_??/fce
+
+Cc: stable@vger.kernel.org
+Fixes: df613b96077c ("[SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support.")
+Signed-off-by: Quinn Tran <qutran@marvell.com>
+Signed-off-by: Nilesh Javali <njavali@marvell.com>
+Link: https://lore.kernel.org/r/20241115130313.46826-4-njavali@marvell.com
+Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/scsi/qla2xxx/qla_def.h | 2
+ drivers/scsi/qla2xxx/qla_dfs.c | 124 ++++++++++++++++++++++++++++++++--------
+ drivers/scsi/qla2xxx/qla_gbl.h | 3
+ drivers/scsi/qla2xxx/qla_init.c | 28 ++++++---
+ 4 files changed, 126 insertions(+), 31 deletions(-)
+
+--- a/drivers/scsi/qla2xxx/qla_def.h
++++ b/drivers/scsi/qla2xxx/qla_def.h
+@@ -3883,6 +3883,8 @@ struct qla_hw_data {
+ uint32_t npiv_supported :1;
+ uint32_t pci_channel_io_perm_failure :1;
+ uint32_t fce_enabled :1;
++ uint32_t user_enabled_fce :1;
++ uint32_t fce_dump_buf_alloced :1;
+ uint32_t fac_supported :1;
+
+ uint32_t chip_reset_done :1;
+--- a/drivers/scsi/qla2xxx/qla_dfs.c
++++ b/drivers/scsi/qla2xxx/qla_dfs.c
+@@ -365,27 +365,32 @@ qla2x00_dfs_fce_show(struct seq_file *s,
+
+ mutex_lock(&ha->fce_mutex);
+
+- seq_puts(s, "FCE Trace Buffer\n");
+- seq_printf(s, "In Pointer = %llx\n\n", (unsigned long long)ha->fce_wr);
+- seq_printf(s, "Base = %llx\n\n", (unsigned long long) ha->fce_dma);
+- seq_puts(s, "FCE Enable Registers\n");
+- seq_printf(s, "%08x %08x %08x %08x %08x %08x\n",
+- ha->fce_mb[0], ha->fce_mb[2], ha->fce_mb[3], ha->fce_mb[4],
+- ha->fce_mb[5], ha->fce_mb[6]);
+-
+- fce = (uint32_t *) ha->fce;
+- fce_start = (unsigned long long) ha->fce_dma;
+- for (cnt = 0; cnt < fce_calc_size(ha->fce_bufs) / 4; cnt++) {
+- if (cnt % 8 == 0)
+- seq_printf(s, "\n%llx: ",
+- (unsigned long long)((cnt * 4) + fce_start));
+- else
+- seq_putc(s, ' ');
+- seq_printf(s, "%08x", *fce++);
++ if (ha->flags.user_enabled_fce) {
++ seq_puts(s, "FCE Trace Buffer\n");
++ seq_printf(s, "In Pointer = %llx\n\n", (unsigned long long)ha->fce_wr);
++ seq_printf(s, "Base = %llx\n\n", (unsigned long long)ha->fce_dma);
++ seq_puts(s, "FCE Enable Registers\n");
++ seq_printf(s, "%08x %08x %08x %08x %08x %08x\n",
++ ha->fce_mb[0], ha->fce_mb[2], ha->fce_mb[3], ha->fce_mb[4],
++ ha->fce_mb[5], ha->fce_mb[6]);
++
++ fce = (uint32_t *)ha->fce;
++ fce_start = (unsigned long long)ha->fce_dma;
++ for (cnt = 0; cnt < fce_calc_size(ha->fce_bufs) / 4; cnt++) {
++ if (cnt % 8 == 0)
++ seq_printf(s, "\n%llx: ",
++ (unsigned long long)((cnt * 4) + fce_start));
++ else
++ seq_putc(s, ' ');
++ seq_printf(s, "%08x", *fce++);
++ }
++
++ seq_puts(s, "\nEnd\n");
++ } else {
++ seq_puts(s, "FCE Trace is currently not enabled\n");
++ seq_puts(s, "\techo [ 1 | 0 ] > fce\n");
+ }
+
+- seq_puts(s, "\nEnd\n");
+-
+ mutex_unlock(&ha->fce_mutex);
+
+ return 0;
+@@ -423,7 +428,7 @@ qla2x00_dfs_fce_release(struct inode *in
+ struct qla_hw_data *ha = vha->hw;
+ int rval;
+
+- if (ha->flags.fce_enabled)
++ if (ha->flags.fce_enabled || !ha->fce)
+ goto out;
+
+ mutex_lock(&ha->fce_mutex);
+@@ -444,11 +449,88 @@ out:
+ return single_release(inode, file);
+ }
+
++static ssize_t
++qla2x00_dfs_fce_write(struct file *file, const char __user *buffer,
++ size_t count, loff_t *pos)
++{
++ struct seq_file *s = file->private_data;
++ struct scsi_qla_host *vha = s->private;
++ struct qla_hw_data *ha = vha->hw;
++ char *buf;
++ int rc = 0;
++ unsigned long enable;
++
++ if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
++ !IS_QLA27XX(ha) && !IS_QLA28XX(ha)) {
++ ql_dbg(ql_dbg_user, vha, 0xd034,
++ "this adapter does not support FCE.");
++ return -EINVAL;
++ }
++
++ buf = memdup_user_nul(buffer, count);
++ if (IS_ERR(buf)) {
++ ql_dbg(ql_dbg_user, vha, 0xd037,
++ "fail to copy user buffer.");
++ return PTR_ERR(buf);
++ }
++
++ enable = kstrtoul(buf, 0, 0);
++ rc = count;
++
++ mutex_lock(&ha->fce_mutex);
++
++ if (enable) {
++ if (ha->flags.user_enabled_fce) {
++ mutex_unlock(&ha->fce_mutex);
++ goto out_free;
++ }
++ ha->flags.user_enabled_fce = 1;
++ if (!ha->fce) {
++ rc = qla2x00_alloc_fce_trace(vha);
++ if (rc) {
++ ha->flags.user_enabled_fce = 0;
++ mutex_unlock(&ha->fce_mutex);
++ goto out_free;
++ }
++
++ /* adjust fw dump buffer to take into account of this feature */
++ if (!ha->flags.fce_dump_buf_alloced)
++ qla2x00_alloc_fw_dump(vha);
++ }
++
++ if (!ha->flags.fce_enabled)
++ qla_enable_fce_trace(vha);
++
++ ql_dbg(ql_dbg_user, vha, 0xd045, "User enabled FCE .\n");
++ } else {
++ if (!ha->flags.user_enabled_fce) {
++ mutex_unlock(&ha->fce_mutex);
++ goto out_free;
++ }
++ ha->flags.user_enabled_fce = 0;
++ if (ha->flags.fce_enabled) {
++ qla2x00_disable_fce_trace(vha, NULL, NULL);
++ ha->flags.fce_enabled = 0;
++ }
++
++ qla2x00_free_fce_trace(ha);
++ /* no need to re-adjust fw dump buffer */
++
++ ql_dbg(ql_dbg_user, vha, 0xd04f, "User disabled FCE .\n");
++ }
++
++ mutex_unlock(&ha->fce_mutex);
++out_free:
++ kfree(buf);
++ return rc;
++}
++
+ static const struct file_operations dfs_fce_ops = {
+ .open = qla2x00_dfs_fce_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = qla2x00_dfs_fce_release,
++ .write = qla2x00_dfs_fce_write,
+ };
+
+ static int
+@@ -534,8 +616,6 @@ qla2x00_dfs_setup(scsi_qla_host_t *vha)
+ if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
+ !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+ goto out;
+- if (!ha->fce)
+- goto out;
+
+ if (qla2x00_dfs_root)
+ goto create_dir;
+--- a/drivers/scsi/qla2xxx/qla_gbl.h
++++ b/drivers/scsi/qla2xxx/qla_gbl.h
+@@ -11,6 +11,9 @@
+ /*
+ * Global Function Prototypes in qla_init.c source file.
+ */
++int qla2x00_alloc_fce_trace(scsi_qla_host_t *);
++void qla2x00_free_fce_trace(struct qla_hw_data *ha);
++void qla_enable_fce_trace(scsi_qla_host_t *);
+ extern int qla2x00_initialize_adapter(scsi_qla_host_t *);
+
+ extern int qla2100_pci_config(struct scsi_qla_host *);
+--- a/drivers/scsi/qla2xxx/qla_init.c
++++ b/drivers/scsi/qla2xxx/qla_init.c
+@@ -2280,7 +2280,7 @@ exit:
+ return rval;
+ }
+
+-static void qla_enable_fce_trace(scsi_qla_host_t *vha)
++void qla_enable_fce_trace(scsi_qla_host_t *vha)
+ {
+ int rval;
+ struct qla_hw_data *ha = vha->hw;
+@@ -3263,25 +3263,24 @@ qla24xx_chip_diag(scsi_qla_host_t *vha)
+ return rval;
+ }
+
+-static void
+-qla2x00_alloc_fce_trace(scsi_qla_host_t *vha)
++int qla2x00_alloc_fce_trace(scsi_qla_host_t *vha)
+ {
+ dma_addr_t tc_dma;
+ void *tc;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_FWI2_CAPABLE(ha))
+- return;
++ return -EINVAL;
+
+ if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
+ !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+- return;
++ return -EINVAL;
+
+ if (ha->fce) {
+ ql_dbg(ql_dbg_init, vha, 0x00bd,
+ "%s: FCE Mem is already allocated.\n",
+ __func__);
+- return;
++ return -EIO;
+ }
+
+ /* Allocate memory for Fibre Channel Event Buffer. */
+@@ -3291,7 +3290,7 @@ qla2x00_alloc_fce_trace(scsi_qla_host_t
+ ql_log(ql_log_warn, vha, 0x00be,
+ "Unable to allocate (%d KB) for FCE.\n",
+ FCE_SIZE / 1024);
+- return;
++ return -ENOMEM;
+ }
+
+ ql_dbg(ql_dbg_init, vha, 0x00c0,
+@@ -3300,6 +3299,16 @@ qla2x00_alloc_fce_trace(scsi_qla_host_t
+ ha->fce_dma = tc_dma;
+ ha->fce = tc;
+ ha->fce_bufs = FCE_NUM_BUFFERS;
++ return 0;
++}
++
++void qla2x00_free_fce_trace(struct qla_hw_data *ha)
++{
++ if (!ha->fce)
++ return;
++ dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce, ha->fce_dma);
++ ha->fce = NULL;
++ ha->fce_dma = 0;
+ }
+
+ static void
+@@ -3390,9 +3399,10 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
+ if (ha->tgt.atio_ring)
+ mq_size += ha->tgt.atio_q_length * sizeof(request_t);
+
+- qla2x00_alloc_fce_trace(vha);
+- if (ha->fce)
++ if (ha->fce) {
+ fce_size = sizeof(struct qla2xxx_fce_chain) + FCE_SIZE;
++ ha->flags.fce_dump_buf_alloced = 1;
++ }
+ qla2x00_alloc_eft_trace(vha);
+ if (ha->eft)
+ eft_size = EFT_SIZE;
--- /dev/null
+From 87c4b5e8a6b65189abd9ea5010ab308941f964a4 Mon Sep 17 00:00:00 2001
+From: Long Li <longli@microsoft.com>
+Date: Wed, 22 Jan 2025 19:07:22 -0800
+Subject: scsi: storvsc: Set correct data length for sending SCSI command without payload
+
+From: Long Li <longli@microsoft.com>
+
+commit 87c4b5e8a6b65189abd9ea5010ab308941f964a4 upstream.
+
+In StorVSC, payload->range.len is used to indicate if this SCSI command
+carries payload. This data is allocated as part of the private driver data
+by the upper layer and may get passed to lower driver uninitialized.
+
+For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
+REQUEST_SENSE while reusing the buffer from a failed command. The private
+data section may have stale data from the previous command.
+
+If the SCSI command doesn't carry payload, the driver may use this value as
+is for communicating with host, resulting in possible corruption.
+
+Fix this by always initializing this value.
+
+Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host")
+Cc: stable@kernel.org
+Tested-by: Roman Kisel <romank@linux.microsoft.com>
+Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
+Reviewed-by: Michael Kelley <mhklinux@outlook.com>
+Signed-off-by: Long Li <longli@microsoft.com>
+Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
+Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/scsi/storvsc_drv.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/scsi/storvsc_drv.c
++++ b/drivers/scsi/storvsc_drv.c
+@@ -1759,6 +1759,7 @@ static int storvsc_queuecommand(struct S
+
+ length = scsi_bufflen(scmnd);
+ payload = (struct vmbus_packet_mpb_array *)&cmd_request->mpb;
++ payload->range.len = 0;
+ payload_sz = 0;
+
+ if (sg_count) {
--- /dev/null
+From 9f7dea875cc7f9c1a56a5c688290634a59cd1420 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+Date: Thu, 16 Jan 2025 20:22:47 +0200
+Subject: serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
+
+From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+
+commit 9f7dea875cc7f9c1a56a5c688290634a59cd1420 upstream.
+
+In the sh-sci driver, sci_ports[0] is used by earlycon. If the earlycon is
+still active when sci_probe() is called and the new serial port is supposed
+to map to sci_ports[0], return -EBUSY to prevent breaking the earlycon.
+
+This situation should occurs in debug scenarios, and users should be
+aware of the potential conflict.
+
+Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
+Cc: stable@vger.kernel.org
+Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+Link: https://lore.kernel.org/r/20250116182249.3828577-4-claudiu.beznea.uj@bp.renesas.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/sh-sci.c | 23 +++++++++++++++++++++++
+ 1 file changed, 23 insertions(+)
+
+--- a/drivers/tty/serial/sh-sci.c
++++ b/drivers/tty/serial/sh-sci.c
+@@ -164,6 +164,7 @@ struct sci_port {
+ static struct sci_port sci_ports[SCI_NPORTS];
+ static unsigned long sci_ports_in_use;
+ static struct uart_driver sci_uart_driver;
++static bool sci_uart_earlycon;
+
+ static inline struct sci_port *
+ to_sci_port(struct uart_port *uart)
+@@ -3343,6 +3344,7 @@ static int sci_probe_single(struct platf
+ static int sci_probe(struct platform_device *dev)
+ {
+ struct plat_sci_port *p;
++ struct resource *res;
+ struct sci_port *sp;
+ unsigned int dev_id;
+ int ret;
+@@ -3372,6 +3374,26 @@ static int sci_probe(struct platform_dev
+ }
+
+ sp = &sci_ports[dev_id];
++
++ /*
++ * In case:
++ * - the probed port alias is zero (as the one used by earlycon), and
++ * - the earlycon is still active (e.g., "earlycon keep_bootcon" in
++ * bootargs)
++ *
++ * defer the probe of this serial. This is a debug scenario and the user
++ * must be aware of it.
++ *
++ * Except when the probed port is the same as the earlycon port.
++ */
++
++ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENODEV;
++
++ if (sci_uart_earlycon && sp == &sci_ports[0] && sp->port.mapbase != res->start)
++ return dev_err_probe(&dev->dev, -EBUSY, "sci_port[0] is used by earlycon!\n");
++
+ platform_set_drvdata(dev, sp);
+
+ ret = sci_probe_single(dev, dev_id, p, sp);
+@@ -3470,6 +3492,7 @@ static int __init early_console_setup(st
+ port_cfg.type = type;
+ sci_ports[0].cfg = &port_cfg;
+ sci_ports[0].params = sci_probe_regmap(&port_cfg);
++ sci_uart_earlycon = true;
+ port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR);
+ sci_serial_out(&sci_ports[0].port, SCSCR,
+ SCSCR_RE | SCSCR_TE | port_cfg.scscr);
--- /dev/null
+From eaeee4225dba30bef4d424bdf134a07b7f423e8b Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+Date: Thu, 16 Jan 2025 20:22:45 +0200
+Subject: serial: sh-sci: Drop __initdata macro for port_cfg
+
+From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+
+commit eaeee4225dba30bef4d424bdf134a07b7f423e8b upstream.
+
+The port_cfg object is used by serial_console_write(), which serves as
+the write function for the earlycon device. Marking port_cfg as __initdata
+causes it to be freed after kernel initialization, resulting in earlycon
+becoming unavailable thereafter. Remove the __initdata macro from port_cfg
+to resolve this issue.
+
+Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
+Cc: stable@vger.kernel.org
+Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
+Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
+Fixes: 0b0cced19ab15c9e ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
+Link: https://lore.kernel.org/r/20250116182249.3828577-2-claudiu.beznea.uj@bp.renesas.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/tty/serial/sh-sci.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/tty/serial/sh-sci.c
++++ b/drivers/tty/serial/sh-sci.c
+@@ -3455,7 +3455,7 @@ sh_early_platform_init_buffer("earlyprin
+ early_serial_buf, ARRAY_SIZE(early_serial_buf));
+ #endif
+ #ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+-static struct plat_sci_port port_cfg __initdata;
++static struct plat_sci_port port_cfg;
+
+ static int __init early_console_setup(struct earlycon_device *device,
+ int type)
clk-sunxi-ng-a100-enable-mmc-clock-reparenting.patch
clk-qcom-clk-alpha-pll-fix-alpha-mode-configuration.patch
clk-qcom-clk-rpmh-prevent-integer-overflow-in-recalc_rate.patch
+blk-cgroup-fix-class-block_class-s-subsystem-refcount-leakage.patch
+efi-libstub-use-std-gnu11-to-fix-build-with-gcc-15.patch
+perf-bench-fix-undefined-behavior-in-cmpworker.patch
+of-correct-child-specifier-used-as-input-of-the-2nd-nexus-node.patch
+of-fix-of_find_node_opts_by_path-handling-of-alias-path-options.patch
+of-reserved-memory-fix-using-wrong-number-of-cells-to-get-property-alignment.patch
+hid-hid-sensor-hub-don-t-use-stale-platform-data-on-remove.patch
+wifi-rtlwifi-rtl8821ae-fix-media-status-report.patch
+wifi-brcmfmac-fix-null-pointer-dereference-in-brcmf_txfinalize.patch
+usb-gadget-f_tcm-translate-error-to-sense.patch
+usb-gadget-f_tcm-decrement-command-ref-count-on-cleanup.patch
+usb-gadget-f_tcm-ep_autoconfig-with-fullspeed-endpoint.patch
+usb-gadget-f_tcm-don-t-prepare-bot-write-request-twice.patch
+soc-qcom-socinfo-avoid-out-of-bounds-read-of-serial-number.patch
+serial-sh-sci-drop-__initdata-macro-for-port_cfg.patch
+serial-sh-sci-do-not-probe-the-serial-port-if-its-slot-in-sci_ports-is-in-use.patch
+powerpc-pseries-eeh-fix-get-pe-state-translation.patch
+dm-crypt-don-t-update-io-sector-after-kcryptd_crypt_write_io_submit.patch
+dm-crypt-track-tag_offset-in-convert_context.patch
+alsa-hda-realtek-enable-headset-mic-on-positivo-c6400.patch
+alsa-hda-fix-headset-detection-failure-due-to-unstable-sort.patch
+scsi-qla2xxx-move-fce-trace-buffer-allocation-to-user-control.patch
+scsi-storvsc-set-correct-data-length-for-sending-scsi-command-without-payload.patch
+kbuild-move-wenum-enum-conversion-to-w-2.patch
--- /dev/null
+From 22cf4fae6660b6e1a583a41cbf84e3046ca9ccd0 Mon Sep 17 00:00:00 2001
+From: Stephan Gerhold <stephan.gerhold@linaro.org>
+Date: Mon, 30 Dec 2024 20:59:35 +0100
+Subject: soc: qcom: socinfo: Avoid out of bounds read of serial number
+
+From: Stephan Gerhold <stephan.gerhold@linaro.org>
+
+commit 22cf4fae6660b6e1a583a41cbf84e3046ca9ccd0 upstream.
+
+On MSM8916 devices, the serial number exposed in sysfs is constant and does
+not change across individual devices. It's always:
+
+ db410c:/sys/devices/soc0$ cat serial_number
+ 2644893864
+
+The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
+have support for the serial_num field in the socinfo struct. There is an
+existing check to avoid exposing the serial number in that case, but it's
+not correct: When checking the item_size returned by SMEM, we need to make
+sure the *end* of the serial_num is within bounds, instead of comparing
+with the *start* offset. The serial_number currently exposed on MSM8916
+devices is just an out of bounds read of whatever comes after the socinfo
+struct in SMEM.
+
+Fix this by changing offsetof() to offsetofend(), so that the size of the
+field is also taken into account.
+
+Cc: stable@vger.kernel.org
+Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver")
+Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
+Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/soc/qcom/socinfo.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/soc/qcom/socinfo.c
++++ b/drivers/soc/qcom/socinfo.c
+@@ -510,7 +510,7 @@ static int qcom_socinfo_probe(struct pla
+ if (!qs->attr.soc_id || !qs->attr.revision)
+ return -ENOMEM;
+
+- if (offsetof(struct socinfo, serial_num) <= item_size) {
++ if (offsetofend(struct socinfo, serial_num) <= item_size) {
+ qs->attr.serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "%u",
+ le32_to_cpu(info->serial_num));
--- /dev/null
+From 3b2a52e88ab0c9469eaadd4d4c8f57d072477820 Mon Sep 17 00:00:00 2001
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Date: Wed, 11 Dec 2024 00:31:48 +0000
+Subject: usb: gadget: f_tcm: Decrement command ref count on cleanup
+
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+
+commit 3b2a52e88ab0c9469eaadd4d4c8f57d072477820 upstream.
+
+We submitted the command with TARGET_SCF_ACK_KREF, which requires
+acknowledgment of command completion. If the command fails, make sure to
+decrement the ref count.
+
+Fixes: cff834c16d23 ("usb-gadget/tcm: Convert to TARGET_SCF_ACK_KREF I/O krefs")
+Cc: stable@vger.kernel.org
+Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/3c667b4d9c8b0b580346a69ff53616b6a74cfea2.1733876548.git.Thinh.Nguyen@synopsys.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/function/f_tcm.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/usb/gadget/function/f_tcm.c
++++ b/drivers/usb/gadget/function/f_tcm.c
+@@ -973,6 +973,7 @@ static void usbg_data_write_cmpl(struct
+ return;
+
+ cleanup:
++ target_put_sess_cmd(se_cmd);
+ transport_generic_free_cmd(&cmd->se_cmd, 0);
+ }
+
--- /dev/null
+From 94d9bf671ae314cacc2d7bf96bd233b4abc7cede Mon Sep 17 00:00:00 2001
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Date: Wed, 11 Dec 2024 00:32:07 +0000
+Subject: usb: gadget: f_tcm: Don't prepare BOT write request twice
+
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+
+commit 94d9bf671ae314cacc2d7bf96bd233b4abc7cede upstream.
+
+The duplicate kmalloc here is causing memory leak. The request
+preparation in bot_send_write_request is also done in
+usbg_prepare_w_request. Remove the duplicate work.
+
+Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
+Cc: stable@vger.kernel.org
+Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/f4f26c3d586cde0d46f8c3bcb4e8ae32311b650d.1733876548.git.Thinh.Nguyen@synopsys.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/function/f_tcm.c | 17 -----------------
+ 1 file changed, 17 deletions(-)
+
+--- a/drivers/usb/gadget/function/f_tcm.c
++++ b/drivers/usb/gadget/function/f_tcm.c
+@@ -245,7 +245,6 @@ static int bot_send_write_request(struct
+ {
+ struct f_uas *fu = cmd->fu;
+ struct se_cmd *se_cmd = &cmd->se_cmd;
+- struct usb_gadget *gadget = fuas_to_gadget(fu);
+ int ret;
+
+ init_completion(&cmd->write_complete);
+@@ -256,22 +255,6 @@ static int bot_send_write_request(struct
+ return -EINVAL;
+ }
+
+- if (!gadget->sg_supported) {
+- cmd->data_buf = kmalloc(se_cmd->data_length, GFP_KERNEL);
+- if (!cmd->data_buf)
+- return -ENOMEM;
+-
+- fu->bot_req_out->buf = cmd->data_buf;
+- } else {
+- fu->bot_req_out->buf = NULL;
+- fu->bot_req_out->num_sgs = se_cmd->t_data_nents;
+- fu->bot_req_out->sg = se_cmd->t_data_sg;
+- }
+-
+- fu->bot_req_out->complete = usbg_data_write_cmpl;
+- fu->bot_req_out->length = se_cmd->data_length;
+- fu->bot_req_out->context = cmd;
+-
+ ret = usbg_prepare_w_request(cmd, fu->bot_req_out);
+ if (ret)
+ goto cleanup;
--- /dev/null
+From 25224c1f07d31c261d04dfbc705a7a0f314a825d Mon Sep 17 00:00:00 2001
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Date: Wed, 11 Dec 2024 00:32:01 +0000
+Subject: usb: gadget: f_tcm: ep_autoconfig with fullspeed endpoint
+
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+
+commit 25224c1f07d31c261d04dfbc705a7a0f314a825d upstream.
+
+Match usb endpoint using fullspeed endpoint descriptor to make sure the
+wMaxPacketSize for fullspeed descriptors is automatically configured.
+
+Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
+Cc: stable@vger.kernel.org
+Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/e4507bc824aed6e7c7f5a718392ab6a7c1480a7f.1733876548.git.Thinh.Nguyen@synopsys.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/function/f_tcm.c | 30 +++++++++++++-----------------
+ 1 file changed, 13 insertions(+), 17 deletions(-)
+
+--- a/drivers/usb/gadget/function/f_tcm.c
++++ b/drivers/usb/gadget/function/f_tcm.c
+@@ -2021,43 +2021,39 @@ static int tcm_bind(struct usb_configura
+ bot_intf_desc.bInterfaceNumber = iface;
+ uasp_intf_desc.bInterfaceNumber = iface;
+ fu->iface = iface;
+- ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bi_desc,
+- &uasp_bi_ep_comp_desc);
++ ep = usb_ep_autoconfig(gadget, &uasp_fs_bi_desc);
+ if (!ep)
+ goto ep_fail;
+
+ fu->ep_in = ep;
+
+- ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_bo_desc,
+- &uasp_bo_ep_comp_desc);
++ ep = usb_ep_autoconfig(gadget, &uasp_fs_bo_desc);
+ if (!ep)
+ goto ep_fail;
+ fu->ep_out = ep;
+
+- ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_status_desc,
+- &uasp_status_in_ep_comp_desc);
++ ep = usb_ep_autoconfig(gadget, &uasp_fs_status_desc);
+ if (!ep)
+ goto ep_fail;
+ fu->ep_status = ep;
+
+- ep = usb_ep_autoconfig_ss(gadget, &uasp_ss_cmd_desc,
+- &uasp_cmd_comp_desc);
++ ep = usb_ep_autoconfig(gadget, &uasp_fs_cmd_desc);
+ if (!ep)
+ goto ep_fail;
+ fu->ep_cmd = ep;
+
+ /* Assume endpoint addresses are the same for both speeds */
+- uasp_bi_desc.bEndpointAddress = uasp_ss_bi_desc.bEndpointAddress;
+- uasp_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress;
++ uasp_bi_desc.bEndpointAddress = uasp_fs_bi_desc.bEndpointAddress;
++ uasp_bo_desc.bEndpointAddress = uasp_fs_bo_desc.bEndpointAddress;
+ uasp_status_desc.bEndpointAddress =
+- uasp_ss_status_desc.bEndpointAddress;
+- uasp_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
++ uasp_fs_status_desc.bEndpointAddress;
++ uasp_cmd_desc.bEndpointAddress = uasp_fs_cmd_desc.bEndpointAddress;
+
+- uasp_fs_bi_desc.bEndpointAddress = uasp_ss_bi_desc.bEndpointAddress;
+- uasp_fs_bo_desc.bEndpointAddress = uasp_ss_bo_desc.bEndpointAddress;
+- uasp_fs_status_desc.bEndpointAddress =
+- uasp_ss_status_desc.bEndpointAddress;
+- uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
++ uasp_ss_bi_desc.bEndpointAddress = uasp_fs_bi_desc.bEndpointAddress;
++ uasp_ss_bo_desc.bEndpointAddress = uasp_fs_bo_desc.bEndpointAddress;
++ uasp_ss_status_desc.bEndpointAddress =
++ uasp_fs_status_desc.bEndpointAddress;
++ uasp_ss_cmd_desc.bEndpointAddress = uasp_fs_cmd_desc.bEndpointAddress;
+
+ ret = usb_assign_descriptors(f, uasp_fs_function_desc,
+ uasp_hs_function_desc, uasp_ss_function_desc,
--- /dev/null
+From 98fa00fd3ae43b857b4976984a135483d89d9281 Mon Sep 17 00:00:00 2001
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Date: Wed, 11 Dec 2024 00:31:43 +0000
+Subject: usb: gadget: f_tcm: Translate error to sense
+
+From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+
+commit 98fa00fd3ae43b857b4976984a135483d89d9281 upstream.
+
+When respond with check_condition error status, clear from_transport
+input so the target layer can translate the sense reason reported by
+f_tcm.
+
+Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
+Cc: stable@vger.kernel.org
+Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
+Link: https://lore.kernel.org/r/b2a5577efe7abd0af0051229622cf7d3be5cdcd0.1733876548.git.Thinh.Nguyen@synopsys.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/usb/gadget/function/f_tcm.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/usb/gadget/function/f_tcm.c
++++ b/drivers/usb/gadget/function/f_tcm.c
+@@ -1067,7 +1067,7 @@ static void usbg_cmd_work(struct work_st
+
+ out:
+ transport_send_check_condition_and_sense(se_cmd,
+- TCM_UNSUPPORTED_SCSI_OPCODE, 1);
++ TCM_UNSUPPORTED_SCSI_OPCODE, 0);
+ }
+
+ static struct usbg_cmd *usbg_get_cmd(struct f_uas *fu,
+@@ -1197,7 +1197,7 @@ static void bot_cmd_work(struct work_str
+
+ out:
+ transport_send_check_condition_and_sense(se_cmd,
+- TCM_UNSUPPORTED_SCSI_OPCODE, 1);
++ TCM_UNSUPPORTED_SCSI_OPCODE, 0);
+ }
+
+ static int bot_submit_command(struct f_uas *fu,
--- /dev/null
+From 68abd0c4ebf24cd499841a488b97a6873d5efabb Mon Sep 17 00:00:00 2001
+From: Marcel Hamer <marcel.hamer@windriver.com>
+Date: Thu, 16 Jan 2025 14:22:40 +0100
+Subject: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
+
+From: Marcel Hamer <marcel.hamer@windriver.com>
+
+commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream.
+
+On removal of the device or unloading of the kernel module a potential NULL
+pointer dereference occurs.
+
+The following sequence deletes the interface:
+
+ brcmf_detach()
+ brcmf_remove_interface()
+ brcmf_del_if()
+
+Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
+BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
+
+After brcmf_remove_interface() call the brcmf_proto_detach() function is
+called providing the following sequence:
+
+ brcmf_detach()
+ brcmf_proto_detach()
+ brcmf_proto_msgbuf_detach()
+ brcmf_flowring_detach()
+ brcmf_msgbuf_delete_flowring()
+ brcmf_msgbuf_remove_flowring()
+ brcmf_flowring_delete()
+ brcmf_get_ifp()
+ brcmf_txfinalize()
+
+Since brcmf_get_ip() can and actually will return NULL in this case the
+call to brcmf_txfinalize() will result in a NULL pointer dereference inside
+brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
+
+This will only happen if a flowring still has an skb.
+
+Although the NULL pointer dereference has only been seen when trying to
+update the tx statistic, all other uses of the ifp pointer have been
+guarded as well with an early return if ifp is NULL.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
+Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
+Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@kernel.org>
+Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -545,6 +545,11 @@ void brcmf_txfinalize(struct brcmf_if *i
+ struct ethhdr *eh;
+ u16 type;
+
++ if (!ifp) {
++ brcmu_pkt_buf_free_skb(txp);
++ return;
++ }
++
+ eh = (struct ethhdr *)(txp->data);
+ type = ntohs(eh->h_proto);
+
--- /dev/null
+From 66ef0289ac99e155d206ddaa0fdfad09ae3cd007 Mon Sep 17 00:00:00 2001
+From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
+Date: Wed, 18 Dec 2024 00:53:11 +0200
+Subject: wifi: rtlwifi: rtl8821ae: Fix media status report
+
+From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
+
+commit 66ef0289ac99e155d206ddaa0fdfad09ae3cd007 upstream.
+
+RTL8821AE is stuck transmitting at the lowest rate allowed by the rate
+mask. This is because the firmware doesn't know the device is connected
+to a network.
+
+Fix the macros SET_H2CCMD_MSRRPT_PARM_OPMODE and
+SET_H2CCMD_MSRRPT_PARM_MACID_IND to work on the first byte of __cmd,
+not the second. Now the firmware is correctly notified when the device
+is connected to a network and it activates the rate control.
+
+Before (MCS3):
+
+[ 5] 0.00-1.00 sec 12.5 MBytes 105 Mbits/sec 0 339 KBytes
+[ 5] 1.00-2.00 sec 10.6 MBytes 89.1 Mbits/sec 0 339 KBytes
+[ 5] 2.00-3.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes
+[ 5] 3.00-4.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes
+[ 5] 4.00-5.00 sec 10.2 MBytes 86.0 Mbits/sec 0 427 KBytes
+
+After (MCS9):
+
+[ 5] 0.00-1.00 sec 33.9 MBytes 284 Mbits/sec 0 771 KBytes
+[ 5] 1.00-2.00 sec 31.6 MBytes 265 Mbits/sec 0 865 KBytes
+[ 5] 2.00-3.00 sec 29.9 MBytes 251 Mbits/sec 0 963 KBytes
+[ 5] 3.00-4.00 sec 28.2 MBytes 237 Mbits/sec 0 963 KBytes
+[ 5] 4.00-5.00 sec 26.8 MBytes 224 Mbits/sec 0 963 KBytes
+
+Fixes: 39f40710d0b5 ("rtlwifi: rtl88821ae: Remove usage of private bit manipulation macros")
+Cc: stable@vger.kernel.org
+Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
+Acked-by: Ping-Ke Shih <pkshih@realtek.com>
+Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
+Link: https://patch.msgid.link/754785b3-8a78-4554-b80d-de5f603b410b@gmail.com
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.h | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.h
++++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.h
+@@ -197,9 +197,9 @@ enum rtl8821a_h2c_cmd {
+
+ /* _MEDIA_STATUS_RPT_PARM_CMD1 */
+ #define SET_H2CCMD_MSRRPT_PARM_OPMODE(__cmd, __value) \
+- u8p_replace_bits(__cmd + 1, __value, BIT(0))
++ u8p_replace_bits(__cmd, __value, BIT(0))
+ #define SET_H2CCMD_MSRRPT_PARM_MACID_IND(__cmd, __value) \
+- u8p_replace_bits(__cmd + 1, __value, BIT(1))
++ u8p_replace_bits(__cmd, __value, BIT(1))
+
+ /* AP_OFFLOAD */
+ #define SET_H2CCMD_AP_OFFLOAD_ON(__cmd, __value) \
projects / thirdparty / kernel / stable-queue.git / commitdiff
