ARM: dts: aspeed: greatlakes: Add Facebook greatlakes (AST2600) BMC

Add linux device tree entry related to
greatlakes specific devices connected to BMC SoC.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Link: https://lore.kernel.org/r/20221111034828.2377-3-Delphine_CC_Chiu@Wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d08a3c450ce7266dcf49299bed99acbd6602c426..2a5a24bea4225de72058f10ede22e9411192323a 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1605,6 +1605,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
        aspeed-bmc-facebook-elbert.dtb \
        aspeed-bmc-facebook-fuji.dtb \
        aspeed-bmc-facebook-galaxy100.dtb \
+       aspeed-bmc-facebook-greatlakes.dtb \
        aspeed-bmc-facebook-minipack.dtb \
        aspeed-bmc-facebook-tiogapass.dtb \
        aspeed-bmc-facebook-wedge40.dtb \

diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644 (file)
index 0000000..8c05bd5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+       model = "Facebook Greatlakes BMC";
+       compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       iio-hwmon {
+               compatible = "iio-hwmon";
+               io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+                               <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+                               <&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+                               <&adc1 5>, <&adc1 6>;
+       };
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&uart3 {
+       status = "okay";
+};
+
+&uart4 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&wdt1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_wdtrst1_default>;
+       aspeed,reset-type = "soc";
+       aspeed,external-signal;
+       aspeed,ext-push-pull;
+       aspeed,ext-active-high;
+       aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rmii4_default>;
+       no-hw-checksum;
+       use-ncsi;
+       mlx,multi-host;
+       ncsi-ctrl,start-redo-probe;
+       ncsi-ctrl,no-channel-monitor;
+       ncsi-package = <1>;
+       ncsi-channel = <1>;
+       ncsi-rexmit = <1>;
+       ncsi-timeout = <2>;
+};
+
+&rtc {
+       status = "okay";
+};
+
+&fmc {
+       status = "okay";
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-rx-bus-width = <4>;
+               spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+       };
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-rx-bus-width = <4>;
+               spi-max-frequency = <50000000>;
+       };
+};
+
+&i2c0 {
+       status = "okay";
+       multi-master;
+       ipmb@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+       multi-master;
+       ipmb@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+       multi-master;
+       ipmb@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c3 {
+       status = "okay";
+       multi-master;
+       ipmb@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c4 {
+       status = "okay";
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+};
+
+&i2c7 {
+       status = "okay";
+};
+
+&i2c8 {
+       status = "okay";
+       temperature-sensor@1f {
+               compatible = "ti,tmp421";
+               reg = <0x1f>;
+       };
+       // NIC EEPROM
+       eeprom@50 {
+               compatible = "st,24c32";
+               reg = <0x50>;
+       };
+};
+
+&i2c9 {
+       status = "okay";
+       multi-master;
+       ipmb@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c10 {
+       status = "okay";
+};
+
+&i2c11 {
+       status = "okay";
+       eeprom@51 {
+               compatible = "atmel,24c128";
+               reg = <0x51>;
+       };
+       eeprom@54 {
+               compatible = "atmel,24c128";
+               reg = <0x54>;
+       };
+};
+
+&i2c12 {
+       status = "okay";
+       temperature-sensor@4f {
+               compatible = "lm75";
+               reg = <0x4f>;
+       };
+};
+
+&i2c13 {
+       status = "okay";
+};
+
+&adc0 {
+       ref_voltage = <2500>;
+       status = "okay";
+       pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+                       &pinctrl_adc2_default &pinctrl_adc3_default
+                       &pinctrl_adc4_default &pinctrl_adc5_default
+                       &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+       ref_voltage = <2500>;
+       status = "okay";
+       pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+                       &pinctrl_adc11_default &pinctrl_adc12_default
+                       &pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&uhci {
+       status = "okay";
+};
+
+&gpio0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+};