arm64: dts: rockchip: Enable HDMI0 on rk3588-nanopc-t6

Add the necessary DT changes to enable HDMI0 on FriendlyELEC NanoPC-T6.
Tested on LTS variant of the board but this part is the same on both.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Link: https://lore.kernel.org/r/20241023080605.623125-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 560eeb56c804cc86cda9b869e1da020bc882aa9b..bf8e1f1116d147808f3a6e999332e50ece802cd0 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588.dtsi"
 
@@ -40,6 +41,17 @@
                stdout-path = "serial2:1500000n8";
        };
 
+       hdmi0-con {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi0_con_in: endpoint {
+                               remote-endpoint = <&hdmi0_out_con>;
+                       };
+               };
+       };
+
        ir-receiver {
                compatible = "gpio-ir-receiver";
                gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
@@ -318,6 +330,26 @@
        status = "okay";
 };
 
+&hdmi0 {
+       status = "okay";
+};
+
+&hdmi0_in {
+       hdmi0_in_vp0: endpoint {
+               remote-endpoint = <&vp0_out_hdmi0>;
+       };
+};
+
+&hdmi0_out {
+       hdmi0_out_con: endpoint {
+               remote-endpoint = <&hdmi0_con_in>;
+       };
+};
+
+&hdptxphy_hdmi0 {
+       status = "okay";
+};
+
 &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0m2_xfer>;
@@ -1039,3 +1071,18 @@
 &usb_host1_ohci {
        status = "okay";
 };
+
+&vop_mmu {
+       status = "okay";
+};
+
+&vop {
+       status = "okay";
+};
+
+&vp0 {
+       vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+               reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+               remote-endpoint = <&hdmi0_in_vp0>;
+       };
+};