arm64: dts: rockchip: Enable HDMI0 on rock-5b

Add the necessary DT changes to enable HDMI0 on Radxa ROCK 5B.

Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-2-466cd80e8ff9@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 8d3bbfd996560289330687e08f02f8a1e6c6525a..ca9a0253801aebf3ac3f0a7918692a25016d9cd4 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588.dtsi"
 
 / {
@@ -37,6 +38,17 @@
                pinctrl-0 = <&hp_detect>;
        };
 
+       hdmi0-con {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi0_con_in: endpoint {
+                               remote-endpoint = <&hdmi0_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -192,6 +204,26 @@
        status = "okay";
 };
 
+&hdmi0 {
+       status = "okay";
+};
+
+&hdmi0_in {
+       hdmi0_in_vp0: endpoint {
+               remote-endpoint = <&vp0_out_hdmi0>;
+       };
+};
+
+&hdmi0_out {
+       hdmi0_out_con: endpoint {
+               remote-endpoint = <&hdmi0_con_in>;
+       };
+};
+
+&hdptxphy_hdmi0 {
+       status = "okay";
+};
+
 &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0m2_xfer>;
@@ -858,3 +890,18 @@
 &usb_host2_xhci {
        status = "okay";
 };
+
+&vop_mmu {
+       status = "okay";
+};
+
+&vop {
+       status = "okay";
+};
+
+&vp0 {
+       vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+               reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+               remote-endpoint = <&hdmi0_in_vp0>;
+       };
+};