diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c
--- linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c 2011-09-15 19:23:01.000000000 +0000
++++ linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c 2011-09-26 17:21:05.000000000 +0000
@@ -0,0 +1,140 @@
+/*
+ * arch/arm/mach-kirkwood/dreamplug-setup.c
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
+diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/guruplug-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/guruplug-setup.c
+--- linux-2.6.32.45.org/arch/arm/mach-kirkwood/guruplug-setup.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.32.45/arch/arm/mach-kirkwood/guruplug-setup.c 2011-09-26 17:22:21.000000000 +0000
+@@ -0,0 +1,131 @@
++/*
++ * arch/arm/mach-kirkwood/guruplug-setup.c
++ *
++ * Marvell GuruPlug Reference Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include <plat/mvsdio.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition guruplug_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_4M
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL
++ },
++};
++
++static struct mv643xx_eth_platform_data guruplug_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
++};
++
++static struct mv643xx_eth_platform_data guruplug_ge01_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
++};
++
++static struct mv_sata_platform_data guruplug_sata_data = {
++ .n_ports = 1,
++};
++
++static struct mvsdio_platform_data guruplug_mvsdio_data = {
++ /* unfortunately the CD signal has not been connected */
++};
++
++static struct gpio_led guruplug_led_pins[] = {
++ {
++ .name = "guruplug:red:health",
++ .gpio = 46,
++ .active_low = 1,
++ },
++ {
++ .name = "guruplug:green:health",
++ .gpio = 47,
++ .active_low = 1,
++ },
++ {
++ .name = "guruplug:red:wmode",
++ .gpio = 48,
++ .active_low = 1,
++ },
++ {
++ .name = "guruplug:green:wmode",
++ .gpio = 49,
++ .active_low = 1,
++ },
++};
++
++static struct gpio_led_platform_data guruplug_led_data = {
++ .leds = guruplug_led_pins,
++ .num_leds = ARRAY_SIZE(guruplug_led_pins),
++};
++
++static struct platform_device guruplug_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &guruplug_led_data,
++ }
++};
++
++static unsigned int guruplug_mpp_config[] __initdata = {
++ MPP46_GPIO, /* M_RLED */
++ MPP47_GPIO, /* M_GLED */
++ MPP48_GPIO, /* B_RLED */
++ MPP49_GPIO, /* B_GLED */
++ 0
++};
++
++static void __init guruplug_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(guruplug_mpp_config);
++
++ kirkwood_uart0_init();
++ kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
++
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&guruplug_ge00_data);
++ kirkwood_ge01_init(&guruplug_ge01_data);
++ kirkwood_sata_init(&guruplug_sata_data);
++ kirkwood_sdio_init(&guruplug_mvsdio_data);
++
++ platform_device_register(&guruplug_leds);
++}
++
++MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
++ /* Maintainer: Siddarth Gore <gores@marvell.com> */
++ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
++ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
++ .boot_params = 0x00000100,
++ .init_machine = guruplug_init,
++ .map_io = kirkwood_map_io,
++ .init_irq = kirkwood_init_irq,
++ .timer = &kirkwood_timer,
++MACHINE_END
diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig
--- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig 2011-08-16 01:57:37.000000000 +0000
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig 2011-09-15 18:34:19.000000000 +0000
-@@ -32,6 +32,12 @@
++++ linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig 2011-09-26 17:22:21.000000000 +0000
+@@ -32,6 +32,18 @@
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DreamPlug Reference Board.
++
++config MACH_GURUPLUG
++ bool "Marvell GuruPlug Reference Board"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Marvell GuruPlug Reference Board.
+
config MACH_TS219
bool "QNAP TS-119 and TS-219 Turbo NAS"
help
diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile
--- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile 2011-08-16 01:57:37.000000000 +0000
-+++ linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile 2011-09-15 18:36:51.000000000 +0000
-@@ -5,6 +5,7 @@
++++ linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile 2011-09-26 17:23:30.000000000 +0000
+@@ -5,6 +5,8 @@
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
++obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
+obj-$(CONFIG_MACH_DREAMPLUG) += dreamplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
diff -Naur linux-2.6.32.45.org/arch/arm/tools/mach-types linux-2.6.32.45/arch/arm/tools/mach-types
--- linux-2.6.32.45.org/arch/arm/tools/mach-types 2011-08-16 01:57:37.000000000 +0000
-+++ linux-2.6.32.45/arch/arm/tools/mach-types 2011-09-15 19:12:48.000000000 +0000
-@@ -2536,3 +2536,4 @@
++++ linux-2.6.32.45/arch/arm/tools/mach-types 2011-09-26 17:33:30.000000000 +0000
+@@ -2536,3 +2536,5 @@
mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
esyx MACH_ESYX ESYX 2551
bulldog MACH_BULLDOG BULLDOG 2553
++guruplug MACH_GURUPLUG GURUPLUG 2601
+dreamplug MACH_DREAMPLUG DREAMPLUG 2659